Return to ttys CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / uboot

Annotation of elwix/config/etc/uboot/ttys, revision 1.2

1.2     ! misho       1: #
        !             2: # $FreeBSD: src/etc/etc.i386/ttys,v 1.20 2010/01/27 11:54:42 ed Exp $
        !             3: #      @(#)ttys        5.1 (Berkeley) 4/17/89
        !             4: #
        !             5: # This file specifies various information about terminals on the system.
        !             6: # It is used by several different programs.  Common entries for the
        !             7: # various columns include:
        !             8: #
        !             9: # name  The name of the terminal device.
        !            10: #
        !            11: # getty The program to start running on the terminal.  Typically a
        !            12: #       getty program, as the name implies.  Other common entries
        !            13: #       include none, when no getty is needed, and xdm, to start the
        !            14: #       X Window System.
        !            15: #
        !            16: # type The initial terminal type for this port.  For hardwired
        !            17: #      terminal lines, this will contain the type of terminal used.
        !            18: #      For virtual consoles, the correct type is typically xterm.
        !            19: #      Other common values include dialup for incoming modem ports, and
        !            20: #      unknown when the terminal type cannot be predetermined.
        !            21: #
        !            22: # status Must be on or off.  If on, init will run the getty program on
        !            23: #        the specified port.  If the word "secure" appears, this tty
        !            24: #        allows root login.
        !            25: #
        !            26: # name getty                           type    status          comments
        !            27: #
        !            28: # If console is marked "insecure", then init will ask for the root password
        !            29: # when going to single-user mode.
        !            30: console        none                            unknown off secure
        !            31: #
        !            32: ttyv0  "/usr/libexec/getty Pc"         xterm   off secure
        !            33: # Virtual terminals
        !            34: ttyv1  "/usr/libexec/getty Pc"         xterm   off secure
        !            35: ttyv2  "/usr/libexec/getty Pc"         xterm   off secure
        !            36: ttyv3  "/usr/libexec/getty Pc"         xterm   off secure
        !            37: ttyv4  "/usr/libexec/getty Pc"         xterm   off secure
        !            38: ttyv5  "/usr/libexec/getty Pc"         xterm   off secure
        !            39: ttyv6  "/usr/libexec/getty Pc"         xterm   off secure
        !            40: ttyv7  "/usr/libexec/getty Pc"         xterm   off secure
        !            41: ttyv8  "/usr/local/bin/xdm -nodaemon"  xterm   off
        !            42: # Serial terminals
        !            43: # The 'dialup' keyword identifies dialin lines to login, fingerd etc.
        !            44: #ttyU0 "/usr/libexec/getty std.38400"  xterm   on  secure
        !            45: ttyu0  "/usr/libexec/getty std.9600"   xterm   on  secure
        !            46: ttyu1  "/usr/libexec/getty std.9600"   dialup  off secure
        !            47: ttyu2  "/usr/libexec/getty std.9600"   dialup  off secure
        !            48: ttyu3  "/usr/libexec/getty std.9600"   dialup  off secure
        !            49: # Dumb console
        !            50: dcons  "/usr/libexec/getty std.9600"   vt100   off secure