--- elwix/config/rc.elwix.mips_alfan2	2014/01/14 20:14:20	1.1.2.5
+++ elwix/config/rc.elwix.mips_alfan2	2014/01/20 13:15:46	1.1.2.14
@@ -3,7 +3,7 @@
 # (C) AITNET ltd - Sofia/Bulgaria <office@aitnet.org>
 #    by Michael Pounov <misho@elwix.org>
 #
-# $Id: rc.elwix.mips_alfan2,v 1.1.2.5 2014/01/14 20:14:20 misho Exp $
+# $Id: rc.elwix.mips_alfan2,v 1.1.2.14 2014/01/20 13:15:46 misho Exp $
 #
 ELWIX_IS_CONFIGURED="YES"
 
@@ -14,6 +14,7 @@ BUILD_DATE=`date "+%Y-%m-%d"`
 
 TARGET="mips"
 TARGET_ARCH="mips"
+TARGET_CPUTYPE="mips32"
 TARGET_BUILD="${TARGET_ARCH}-${PLATFORM}-freebsd"
 PARALLEL_BUILD="-j2"
 
@@ -21,6 +22,7 @@ CURDIR=$(pwd)
 CFGDIR="${CURDIR}/config"
 
 SRCCONF="${CFGDIR}/src_mips_alfa_n2.conf"
+MAKECONF="${CFGDIR}/make_mips_alfa_n2.conf"
 
 PREDIR=".."
 
@@ -48,9 +50,9 @@ CROSSTOOLDIR="${BSDOBJ}/${BSDSRC}/tmp"
 
 ### Kernel
 BSDKERNCONF="${BSDSRC}/sys/${TARGET}/conf"
-KERNDEVHINTS="${BSDKERNCONF}/GENERIC.hints"
+KERNDEVHINTS="${BSDKERNCONF}/PB92.hints"
 
-KERNHINT="ELWIX_${TARGET_ARCH}.hints"
+KERNHINT="ELWIX_ALFA_N2.hints"
 
 KERNEL="${KERN}/boot/kernel/kernel"
 KERNCONF="ELWIX_ALFA_N2"
@@ -60,11 +62,11 @@ KERNCONF_ROOTFS="ELWIX_ALFA_N2_ROOTFS"
 
 ### Rootfs
 ROOTFS_MKDIR="${ADIR}/${TARGET_ARCH}/elwix"
-ROOTFS_CONF="elwix_firmware.conf"
+ROOTFS_CONF="elwix_firmware_alfa_n2.conf"
 
 ROOTFS="${DEST}/rootfs"
 ROOTFS_ETC="${CFGDIR}/etc/rootfs"
-ELWIX_ROOTFS="${CFGDIR}/elwix_rootfs.conf"
+ELWIX_ROOTFS="${CFGDIR}/elwix_rootfs_alfa_n2.conf"
 
 ROOTFS_KERN="kernel_rootfs.gz"
 
@@ -95,6 +97,14 @@ BASE_FS="${DEST}/base.fs"
 BASE_ETC="${CFGDIR}/etc/default"
 BASE_OS="ELWIX-${VERSION}_base_64mb_${TARGET_ARCH}_${BUILD_DATE}.tar.gz"
 
+### U-boot base firmware
+UBFS="${DEST}/ubfs"
+ELWIX_UBFS="${CFGDIR}/elwix_uboot.conf"
+
+UBOOT_FS="${DEST}/uboot.fs"
+UBOOT_ETC="${CFGDIR}/etc/uboot"
+UBOOT_OS="ELWIX-${VERSION}_uboot_6mb_${TARGET_ARCH}_${BUILD_DATE}.tar.gz"
+
 ### FS Image
 FS="${DEST}/elwix.fs"
 FS_ETC="${CFGDIR}/etc/default"
@@ -112,12 +122,10 @@ IMGNAME="${REL}/ELWIX-${VERSION}_${TARGET_ARCH}"
 
 ### Make U-boot image
 UB_COMPRESS="lzma"
-UB_OBJS="${BSDOBJ}/uboot"
-UB_KERNEL="${UB_OBJS}/kernel"
 # Must be same like into kernel config [ KERNLOADADDR=0x80050000 ]
 # if address variables are commented install2ub.sh automatic detect addresses
-#UB_LOADADDR=0x80002000
-#UB_ENTRYADDR=0x80002100
+UB_LOADADDR=0x80050000
+UB_ENTRYADDR=0x80050100
 
 ### Cross
 CBUILD="${DEST}/cross_build.sh"
@@ -134,7 +142,7 @@ CROSS_FT_VIMAGE="${BSDTOOLS}/vimage"
 CROSS_FT_WTAP="${BSDTOOLS}/wtap"
 
 CROSS_AXL="../gpl/axl"
-AXL_CFG="./configure --disable-py-axl --prefix=${WORLD}/usr/local --build=${TARGET_BUILD}"
+AXL_CFG="./configure --disable-py-axl --prefix=${WORLD}/usr/local --host=${TARGET_BUILD}"
 #AXL_LIB="${CROSS_AXL}/src/.libs/libaxl.so.*"
 #AXL_LIB_NS="${CROSS_AXL}/ns/.libs/libaxl-ns.so.*"
 #AXL_LIB_BABEL="${CROSS_AXL}/babel/.libs/libaxl-babel.so.*"