--- elwix/config/rc.elwix.mips_alfan2	2014/01/16 18:23:55	1.1.2.12
+++ elwix/config/rc.elwix.mips_alfan2	2014/01/27 23:21:56	1.1.2.18
@@ -3,7 +3,7 @@
 # (C) AITNET ltd - Sofia/Bulgaria <office@aitnet.org>
 #    by Michael Pounov <misho@elwix.org>
 #
-# $Id: rc.elwix.mips_alfan2,v 1.1.2.12 2014/01/16 18:23:55 misho Exp $
+# $Id: rc.elwix.mips_alfan2,v 1.1.2.18 2014/01/27 23:21:56 misho Exp $
 #
 ELWIX_IS_CONFIGURED="YES"
 
@@ -97,6 +97,14 @@ BASE_FS="${DEST}/base.fs"
 BASE_ETC="${CFGDIR}/etc/default"
 BASE_OS="ELWIX-${VERSION}_base_64mb_${TARGET_ARCH}_${BUILD_DATE}.tar.gz"
 
+### U-boot base firmware
+UBFS="${DEST}/ubfs"
+ELWIX_UBFS="${CFGDIR}/elwix_uboot.conf"
+
+UBOOT_FS="${DEST}/uboot.fs"
+UBOOT_ETC="${CFGDIR}/etc/uboot"
+UBOOT_OS="ELWIX-${VERSION}_uboot_6mb_${TARGET_ARCH}_${BUILD_DATE}.tar.gz"
+
 ### FS Image
 FS="${DEST}/elwix.fs"
 FS_ETC="${CFGDIR}/etc/default"
@@ -114,13 +122,19 @@ IMGNAME="${REL}/ELWIX-${VERSION}_${TARGET_ARCH}"
 
 ### Make U-boot image
 UB_COMPRESS="lzma"
-UB_OBJS="${BSDOBJ}/uboot"
-UB_KERNEL="${UB_OBJS}/kernel"
+UB_COMPRESS_ROOTFS="ulzma"
 # Must be same like into kernel config [ KERNLOADADDR=0x80050000 ]
 # if address variables are commented install2ub.sh automatic detect addresses
-#UB_LOADADDR=0x80002000
-#UB_ENTRYADDR=0x80002100
+UB_LOADADDR=0x80050000
+UB_ENTRYADDR=0x80050100
+UB_ORDER="be"
 
+# u-boot rootfs image size
+UB_ROOTFS_SIZE="24m"
+# rootfs size on nand with 64kb blocks
+UB_ROOTFS_NAND_SIZE="96"
+UB_KERNEL_NAND_SIZE="25"
+
 ### Cross
 CBUILD="${DEST}/cross_build.sh"
 CGBUILD="${DEST}/cross_gbuild.sh"
@@ -135,11 +149,11 @@ CROSS_FT_NET80211="${BSDTOOLS}/net80211"
 CROSS_FT_VIMAGE="${BSDTOOLS}/vimage"
 CROSS_FT_WTAP="${BSDTOOLS}/wtap"
 
-CROSS_AXL="../gpl/axl"
-AXL_CFG="./configure --disable-py-axl --prefix=${WORLD}/usr/local --host=${TARGET_BUILD}"
-#AXL_LIB="${CROSS_AXL}/src/.libs/libaxl.so.*"
-#AXL_LIB_NS="${CROSS_AXL}/ns/.libs/libaxl-ns.so.*"
-#AXL_LIB_BABEL="${CROSS_AXL}/babel/.libs/libaxl-babel.so.*"
+#CROSS_AXL="../gpl/axl"
+#AXL_CFG="./configure --disable-py-axl --prefix=${WORLD}/usr/local --host=${TARGET_BUILD}"
+##AXL_LIB="${CROSS_AXL}/src/.libs/libaxl.so.*"
+##AXL_LIB_NS="${CROSS_AXL}/ns/.libs/libaxl-ns.so.*"
+##AXL_LIB_BABEL="${CROSS_AXL}/babel/.libs/libaxl-babel.so.*"
 
 CROSS_ELWIX="../libelwix"
 ELWIX_CFG="./configure --prefix=${WORLD}/usr/local --host=${TARGET_BUILD}"