elwix/files/sqlite/dist/sqlite3.h - diff

Return to sqlite3.h CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / files / sqlite / dist

Diff for /elwix/files/sqlite/dist/sqlite3.h between versions 1.3 and 1.3.14.1

version 1.3, 2013/01/28 01:47:39	version 1.3.14.1, 2016/09/29 14:38:41
Line 23	Line 23
**	**
** The official C-language API documentation for SQLite is derived	** The official C-language API documentation for SQLite is derived
** from comments in this file. This file is the authoritative source	** from comments in this file. This file is the authoritative source
** on how SQLite interfaces are suppose to operate.	** on how SQLite interfaces are supposed to operate.
**	**
** The name of this file under configuration management is "sqlite.h.in".	** The name of this file under configuration management is "sqlite.h.in".
** The makefile makes some minor changes to this file (such as inserting	** The makefile makes some minor changes to this file (such as inserting
** the version number) and changes its name to "sqlite3.h" as	** the version number) and changes its name to "sqlite3.h" as
** part of the build process.	** part of the build process.
*/	*/
#ifndef _SQLITE3_H_	#ifndef SQLITE3_H
#define _SQLITE3_H_	#define SQLITE3_H
#include <stdarg.h> /* Needed for the definition of va_list */	#include <stdarg.h> /* Needed for the definition of va_list */

/*	/*
Line 43 extern "C" {	Line 43 extern "C" {


/*	/*
** Add the ability to override 'extern'	** Provide the ability to override linkage features of the interface.
*/	*/
#ifndef SQLITE_EXTERN	#ifndef SQLITE_EXTERN
# define SQLITE_EXTERN extern	# define SQLITE_EXTERN extern
#endif	#endif

#ifndef SQLITE_API	#ifndef SQLITE_API
# define SQLITE_API	# define SQLITE_API
#endif	#endif
	#ifndef SQLITE_CDECL
	# define SQLITE_CDECL
	#endif
	#ifndef SQLITE_APICALL
	# define SQLITE_APICALL
	#endif
	#ifndef SQLITE_STDCALL
	# define SQLITE_STDCALL SQLITE_APICALL
	#endif
	#ifndef SQLITE_CALLBACK
	# define SQLITE_CALLBACK
	#endif
	#ifndef SQLITE_SYSAPI
	# define SQLITE_SYSAPI
	#endif


/*	/*
** These no-op macros are used in front of interfaces to mark those	** These no-op macros are used in front of interfaces to mark those
** interfaces as either deprecated or experimental. New applications	** interfaces as either deprecated or experimental. New applications
** should not use deprecated interfaces - they are support for backwards	** should not use deprecated interfaces - they are supported for backwards
** compatibility only. Application writers should be aware that	** compatibility only. Application writers should be aware that
** experimental interfaces are subject to change in point releases.	** experimental interfaces are subject to change in point releases.
**	**
Line 107 extern "C" {	Line 120 extern "C" {
** [sqlite3_libversion_number()], [sqlite3_sourceid()],	** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].	** [sqlite_version()] and [sqlite_source_id()].
*/	*/
#define SQLITE_VERSION "3.7.15.2"	#define SQLITE_VERSION "3.14.2"
#define SQLITE_VERSION_NUMBER 3007015	#define SQLITE_VERSION_NUMBER 3014002
#define SQLITE_SOURCE_ID "2013-01-09 11:53:05 c0e09560d26f0a6456be9dd3447f5311eb4f238f"	#define SQLITE_SOURCE_ID "2016-09-12 18:50:49 29dbef4b8585f753861a36d6dd102ca634197bd6"

/*	/*
** CAPI3REF: Run-Time Library Version Numbers	** CAPI3REF: Run-Time Library Version Numbers
Line 120 extern "C" {	Line 133 extern "C" {
** but are associated with the library instead of the header file. ^(Cautious	** but are associated with the library instead of the header file. ^(Cautious
** programmers might include assert() statements in their application to	** programmers might include assert() statements in their application to
** verify that values returned by these interfaces match the macros in	** verify that values returned by these interfaces match the macros in
** the header, and thus insure that the application is	** the header, and thus ensure that the application is
** compiled with matching library and header files.	** compiled with matching library and header files.
**	**
** <blockquote><pre>	** <blockquote><pre>
Line 201 SQLITE_API const char *sqlite3_compileoption_get(int N	Line 214 SQLITE_API const char *sqlite3_compileoption_get(int N
** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but	** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but
** can be fully or partially disabled using a call to [sqlite3_config()]	** can be fully or partially disabled using a call to [sqlite3_config()]
** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],	** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],
** or [SQLITE_CONFIG_MUTEX]. ^(The return value of the	** or [SQLITE_CONFIG_SERIALIZED]. ^(The return value of the
** sqlite3_threadsafe() function shows only the compile-time setting of	** sqlite3_threadsafe() function shows only the compile-time setting of
** thread safety, not any run-time changes to that setting made by	** thread safety, not any run-time changes to that setting made by
** sqlite3_config(). In other words, the return value from sqlite3_threadsafe()	** sqlite3_config(). In other words, the return value from sqlite3_threadsafe()
Line 266 typedef sqlite_uint64 sqlite3_uint64;	Line 279 typedef sqlite_uint64 sqlite3_uint64;

/*	/*
** CAPI3REF: Closing A Database Connection	** CAPI3REF: Closing A Database Connection
	** DESTRUCTOR: sqlite3
**	**
** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors	** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors
** for the [sqlite3] object.	** for the [sqlite3] object.
** ^Calls to sqlite3_close() and sqlite3_close_v2() return SQLITE_OK if	** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if
** the [sqlite3] object is successfully destroyed and all associated	** the [sqlite3] object is successfully destroyed and all associated
** resources are deallocated.	** resources are deallocated.
**	**
Line 277 typedef sqlite_uint64 sqlite3_uint64;	Line 291 typedef sqlite_uint64 sqlite3_uint64;
** statements or unfinished sqlite3_backup objects then sqlite3_close()	** statements or unfinished sqlite3_backup objects then sqlite3_close()
** will leave the database connection open and return [SQLITE_BUSY].	** will leave the database connection open and return [SQLITE_BUSY].
** ^If sqlite3_close_v2() is called with unfinalized prepared statements	** ^If sqlite3_close_v2() is called with unfinalized prepared statements
** and unfinished sqlite3_backups, then the database connection becomes	** and/or unfinished sqlite3_backups, then the database connection becomes
** an unusable "zombie" which will automatically be deallocated when the	** an unusable "zombie" which will automatically be deallocated when the
** last prepared statement is finalized or the last sqlite3_backup is	** last prepared statement is finalized or the last sqlite3_backup is
** finished. The sqlite3_close_v2() interface is intended for use with	** finished. The sqlite3_close_v2() interface is intended for use with
Line 288 typedef sqlite_uint64 sqlite3_uint64;	Line 302 typedef sqlite_uint64 sqlite3_uint64;
** [sqlite3_blob_close \| close] all [BLOB handles], and	** [sqlite3_blob_close \| close] all [BLOB handles], and
** [sqlite3_backup_finish \| finish] all [sqlite3_backup] objects associated	** [sqlite3_backup_finish \| finish] all [sqlite3_backup] objects associated
** with the [sqlite3] object prior to attempting to close the object. ^If	** with the [sqlite3] object prior to attempting to close the object. ^If
** sqlite3_close() is called on a [database connection] that still has	** sqlite3_close_v2() is called on a [database connection] that still has
** outstanding [prepared statements], [BLOB handles], and/or	** outstanding [prepared statements], [BLOB handles], and/or
** [sqlite3_backup] objects then it returns SQLITE_OK but the deallocation	** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation
** of resources is deferred until all [prepared statements], [BLOB handles],	** of resources is deferred until all [prepared statements], [BLOB handles],
** and [sqlite3_backup] objects are also destroyed.	** and [sqlite3_backup] objects are also destroyed.
**	**
Line 317 typedef int (sqlite3_callback)(void,int,char**, char	Line 331 typedef int (sqlite3_callback)(void,int,char**, char

/*	/*
** CAPI3REF: One-Step Query Execution Interface	** CAPI3REF: One-Step Query Execution Interface
	** METHOD: sqlite3
**	**
** The sqlite3_exec() interface is a convenience wrapper around	** The sqlite3_exec() interface is a convenience wrapper around
** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()],	** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()],
Line 341 typedef int (sqlite3_callback)(void,int,char**, char	Line 356 typedef int (sqlite3_callback)(void,int,char**, char
** from [sqlite3_malloc()] and passed back through the 5th parameter.	** from [sqlite3_malloc()] and passed back through the 5th parameter.
** To avoid memory leaks, the application should invoke [sqlite3_free()]	** To avoid memory leaks, the application should invoke [sqlite3_free()]
** on error message strings returned through the 5th parameter of	** on error message strings returned through the 5th parameter of
** of sqlite3_exec() after the error message string is no longer needed.	** sqlite3_exec() after the error message string is no longer needed.
** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors	** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
** occur, then sqlite3_exec() sets the pointer in its 5th parameter to	** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
** NULL before returning.	** NULL before returning.
Line 368 typedef int (sqlite3_callback)(void,int,char**, char	Line 383 typedef int (sqlite3_callback)(void,int,char**, char
** Restrictions:	** Restrictions:
**	**
** <ul>	** <ul>
** <li> The application must insure that the 1st parameter to sqlite3_exec()	** <li> The application must ensure that the 1st parameter to sqlite3_exec()
** is a valid and open [database connection].	** is a valid and open [database connection].
** <li> The application must not close [database connection] specified by	** <li> The application must not close the [database connection] specified by
** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.	** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.
** <li> The application must not modify the SQL statement text passed into	** <li> The application must not modify the SQL statement text passed into
** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.	** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
Line 386 SQLITE_API int sqlite3_exec(	Line 401 SQLITE_API int sqlite3_exec(

/*	/*
** CAPI3REF: Result Codes	** CAPI3REF: Result Codes
** KEYWORDS: SQLITE_OK {error code} {error codes}	** KEYWORDS: {result code definitions}
** KEYWORDS: {result code} {result codes}
**	**
** Many SQLite functions return an integer result code from the set shown	** Many SQLite functions return an integer result code from the set shown
** here in order to indicate success or failure.	** here in order to indicate success or failure.
**	**
** New error codes may be added in future versions of SQLite.	** New error codes may be added in future versions of SQLite.
**	**
** See also: [SQLITE_IOERR_READ \| extended result codes],	** See also: [extended result code definitions]
** [sqlite3_vtab_on_conflict()] [SQLITE_ROLLBACK \| result codes].
*/	*/
#define SQLITE_OK 0 /* Successful result */	#define SQLITE_OK 0 /* Successful result */
/* beginning-of-error-codes */	/* beginning-of-error-codes */
Line 425 SQLITE_API int sqlite3_exec(	Line 438 SQLITE_API int sqlite3_exec(
#define SQLITE_FORMAT 24 /* Auxiliary database format error */	#define SQLITE_FORMAT 24 /* Auxiliary database format error */
#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */	#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */
#define SQLITE_NOTADB 26 /* File opened that is not a database file */	#define SQLITE_NOTADB 26 /* File opened that is not a database file */
	#define SQLITE_NOTICE 27 /* Notifications from sqlite3_log() */
	#define SQLITE_WARNING 28 /* Warnings from sqlite3_log() */
#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */	#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */
#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */	#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */
/* end-of-error-codes */	/* end-of-error-codes */

/*	/*
** CAPI3REF: Extended Result Codes	** CAPI3REF: Extended Result Codes
** KEYWORDS: {extended error code} {extended error codes}	** KEYWORDS: {extended result code definitions}
** KEYWORDS: {extended result code} {extended result codes}
**	**
** In its default configuration, SQLite API routines return one of 26 integer	** In its default configuration, SQLite API routines return one of 30 integer
** [SQLITE_OK \| result codes]. However, experience has shown that many of	** [result codes]. However, experience has shown that many of
** these result codes are too coarse-grained. They do not provide as	** these result codes are too coarse-grained. They do not provide as
** much information about problems as programmers might like. In an effort to	** much information about problems as programmers might like. In an effort to
** address this, newer versions of SQLite (version 3.3.8 and later) include	** address this, newer versions of SQLite (version 3.3.8 and later) include
** support for additional result codes that provide more detailed information	** support for additional result codes that provide more detailed information
** about errors. The extended result codes are enabled or disabled	** about errors. These [extended result codes] are enabled or disabled
** on a per database connection basis using the	** on a per database connection basis using the
** [sqlite3_extended_result_codes()] API.	** [sqlite3_extended_result_codes()] API. Or, the extended code for
**	** the most recent error can be obtained using
** Some of the available extended result codes are listed here.	** [sqlite3_extended_errcode()].
** One may expect the number of extended result codes will be expand
** over time. Software that uses extended result codes should expect
** to see new result codes in future releases of SQLite.
**
** The SQLITE_OK result code will never be extended. It will always
** be exactly zero.
*/	*/
#define SQLITE_IOERR_READ (SQLITE_IOERR \| (1<<8))	#define SQLITE_IOERR_READ (SQLITE_IOERR \| (1<<8))
#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR \| (2<<8))	#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR \| (2<<8))
Line 475 SQLITE_API int sqlite3_exec(	Line 483 SQLITE_API int sqlite3_exec(
#define SQLITE_IOERR_SHMMAP (SQLITE_IOERR \| (21<<8))	#define SQLITE_IOERR_SHMMAP (SQLITE_IOERR \| (21<<8))
#define SQLITE_IOERR_SEEK (SQLITE_IOERR \| (22<<8))	#define SQLITE_IOERR_SEEK (SQLITE_IOERR \| (22<<8))
#define SQLITE_IOERR_DELETE_NOENT (SQLITE_IOERR \| (23<<8))	#define SQLITE_IOERR_DELETE_NOENT (SQLITE_IOERR \| (23<<8))
	#define SQLITE_IOERR_MMAP (SQLITE_IOERR \| (24<<8))
	#define SQLITE_IOERR_GETTEMPPATH (SQLITE_IOERR \| (25<<8))
	#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR \| (26<<8))
	#define SQLITE_IOERR_VNODE (SQLITE_IOERR \| (27<<8))
	#define SQLITE_IOERR_AUTH (SQLITE_IOERR \| (28<<8))
#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED \| (1<<8))	#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED \| (1<<8))
#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY \| (1<<8))	#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY \| (1<<8))
	#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY \| (2<<8))
#define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN \| (1<<8))	#define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN \| (1<<8))
#define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN \| (2<<8))	#define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN \| (2<<8))
#define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN \| (3<<8))	#define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN \| (3<<8))
	#define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN \| (4<<8))
#define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT \| (1<<8))	#define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT \| (1<<8))
#define SQLITE_READONLY_RECOVERY (SQLITE_READONLY \| (1<<8))	#define SQLITE_READONLY_RECOVERY (SQLITE_READONLY \| (1<<8))
#define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY \| (2<<8))	#define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY \| (2<<8))
	#define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY \| (3<<8))
	#define SQLITE_READONLY_DBMOVED (SQLITE_READONLY \| (4<<8))
#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT \| (2<<8))	#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT \| (2<<8))
	#define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT \| (1<<8))
	#define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT \| (2<<8))
	#define SQLITE_CONSTRAINT_FOREIGNKEY (SQLITE_CONSTRAINT \| (3<<8))
	#define SQLITE_CONSTRAINT_FUNCTION (SQLITE_CONSTRAINT \| (4<<8))
	#define SQLITE_CONSTRAINT_NOTNULL (SQLITE_CONSTRAINT \| (5<<8))
	#define SQLITE_CONSTRAINT_PRIMARYKEY (SQLITE_CONSTRAINT \| (6<<8))
	#define SQLITE_CONSTRAINT_TRIGGER (SQLITE_CONSTRAINT \| (7<<8))
	#define SQLITE_CONSTRAINT_UNIQUE (SQLITE_CONSTRAINT \| (8<<8))
	#define SQLITE_CONSTRAINT_VTAB (SQLITE_CONSTRAINT \| (9<<8))
	#define SQLITE_CONSTRAINT_ROWID (SQLITE_CONSTRAINT \|(10<<8))
	#define SQLITE_NOTICE_RECOVER_WAL (SQLITE_NOTICE \| (1<<8))
	#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE \| (2<<8))
	#define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING \| (1<<8))
	#define SQLITE_AUTH_USER (SQLITE_AUTH \| (1<<8))
	#define SQLITE_OK_LOAD_PERMANENTLY (SQLITE_OK \| (1<<8))

/*	/*
** CAPI3REF: Flags For File Open Operations	** CAPI3REF: Flags For File Open Operations
Line 537 SQLITE_API int sqlite3_exec(	Line 569 SQLITE_API int sqlite3_exec(
** after reboot following a crash or power loss, the only bytes in a	** after reboot following a crash or power loss, the only bytes in a
** file that were written at the application level might have changed	** file that were written at the application level might have changed
** and that adjacent bytes, even bytes within the same sector are	** and that adjacent bytes, even bytes within the same sector are
** guaranteed to be unchanged.	** guaranteed to be unchanged. The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
	** flag indicate that a file cannot be deleted when open. The
	** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
	** read-only media and cannot be changed even by processes with
	** elevated privileges.
*/	*/
#define SQLITE_IOCAP_ATOMIC 0x00000001	#define SQLITE_IOCAP_ATOMIC 0x00000001
#define SQLITE_IOCAP_ATOMIC512 0x00000002	#define SQLITE_IOCAP_ATOMIC512 0x00000002
Line 552 SQLITE_API int sqlite3_exec(	Line 588 SQLITE_API int sqlite3_exec(
#define SQLITE_IOCAP_SEQUENTIAL 0x00000400	#define SQLITE_IOCAP_SEQUENTIAL 0x00000400
#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800	#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800
#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000	#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000
	#define SQLITE_IOCAP_IMMUTABLE 0x00002000

/*	/*
** CAPI3REF: File Locking Levels	** CAPI3REF: File Locking Levels
Line 658 struct sqlite3_file {	Line 695 struct sqlite3_file {
** locking strategy (for example to use dot-file locks), to inquire	** locking strategy (for example to use dot-file locks), to inquire
** about the status of a lock, or to break stale locks. The SQLite	** about the status of a lock, or to break stale locks. The SQLite
** core reserves all opcodes less than 100 for its own use.	** core reserves all opcodes less than 100 for its own use.
** A [SQLITE_FCNTL_LOCKSTATE \| list of opcodes] less than 100 is available.	** A [file control opcodes \| list of opcodes] less than 100 is available.
** Applications that define a custom xFileControl method should use opcodes	** Applications that define a custom xFileControl method should use opcodes
** greater than 100 to avoid conflicts. VFS implementations should	** greater than 100 to avoid conflicts. VFS implementations should
** return [SQLITE_NOTFOUND] for file control opcodes that they do not	** return [SQLITE_NOTFOUND] for file control opcodes that they do not
Line 723 struct sqlite3_io_methods {	Line 760 struct sqlite3_io_methods {
void (xShmBarrier)(sqlite3_file);	void (xShmBarrier)(sqlite3_file);
int (xShmUnmap)(sqlite3_file, int deleteFlag);	int (xShmUnmap)(sqlite3_file, int deleteFlag);
/* Methods above are valid for version 2 */	/* Methods above are valid for version 2 */
	int (xFetch)(sqlite3_file, sqlite3_int64 iOfst, int iAmt, void **pp);
	int (xUnfetch)(sqlite3_file, sqlite3_int64 iOfst, void *p);
	/* Methods above are valid for version 3 */
/* Additional methods may be added in future releases */	/* Additional methods may be added in future releases */
};	};

/*	/*
** CAPI3REF: Standard File Control Opcodes	** CAPI3REF: Standard File Control Opcodes
	** KEYWORDS: {file control opcodes} {file control opcode}
**	**
** These integer constants are opcodes for the xFileControl method	** These integer constants are opcodes for the xFileControl method
** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]	** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
** interface.	** interface.
**	**
	** <ul>
	** <li>[[SQLITE_FCNTL_LOCKSTATE]]
** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This	** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This
** opcode causes the xFileControl method to write the current state of	** opcode causes the xFileControl method to write the current state of
** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],	** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])	** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
** into an integer that the pArg argument points to. This capability	** into an integer that the pArg argument points to. This capability
** is used during testing and only needs to be supported when SQLITE_TEST	** is used during testing and is only available when the SQLITE_TEST
** is defined.	** compile-time option is used.
** <ul>	**
** <li>[[SQLITE_FCNTL_SIZE_HINT]]	** <li>[[SQLITE_FCNTL_SIZE_HINT]]
** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS	** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
** layer a hint of how large the database file will grow to be during the	** layer a hint of how large the database file will grow to be during the
Line 761 struct sqlite3_io_methods {	Line 804 struct sqlite3_io_methods {
** <li>[[SQLITE_FCNTL_FILE_POINTER]]	** <li>[[SQLITE_FCNTL_FILE_POINTER]]
** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer	** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
** to the [sqlite3_file] object associated with a particular database	** to the [sqlite3_file] object associated with a particular database
** connection. See the [sqlite3_file_control()] documentation for	** connection. See also [SQLITE_FCNTL_JOURNAL_POINTER].
** additional information.
**	**
	** <li>[[SQLITE_FCNTL_JOURNAL_POINTER]]
	** The [SQLITE_FCNTL_JOURNAL_POINTER] opcode is used to obtain a pointer
	** to the [sqlite3_file] object associated with the journal file (either
	** the [rollback journal] or the [write-ahead log]) for a particular database
	** connection. See also [SQLITE_FCNTL_FILE_POINTER].
	**
** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]	** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
** ^(The [SQLITE_FCNTL_SYNC_OMITTED] opcode is generated internally by	** No longer in use.
** SQLite and sent to all VFSes in place of a call to the xSync method
** when the database connection has [PRAGMA synchronous] set to OFF.)^
** Some specialized VFSes need this signal in order to operate correctly
** when [PRAGMA synchronous \| PRAGMA synchronous=OFF] is set, but most
** VFSes do not need this signal and should silently ignore this opcode.
** Applications should not call [sqlite3_file_control()] with this
** opcode as doing so may disrupt the operation of the specialized VFSes
** that do require it.
**	**
	** <li>[[SQLITE_FCNTL_SYNC]]
	** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and
	** sent to the VFS immediately before the xSync method is invoked on a
	** database file descriptor. Or, if the xSync method is not invoked
	** because the user has configured SQLite with
	** [PRAGMA synchronous \| PRAGMA synchronous=OFF] it is invoked in place
	** of the xSync method. In most cases, the pointer argument passed with
	** this file-control is NULL. However, if the database file is being synced
	** as part of a multi-database commit, the argument points to a nul-terminated
	** string containing the transactions master-journal file name. VFSes that
	** do not need this signal should silently ignore this opcode. Applications
	** should not call [sqlite3_file_control()] with this opcode as doing so may
	** disrupt the operation of the specialized VFSes that do require it.
	**
	** <li>[[SQLITE_FCNTL_COMMIT_PHASETWO]]
	** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite
	** and sent to the VFS after a transaction has been committed immediately
	** but before the database is unlocked. VFSes that do not need this signal
	** should silently ignore this opcode. Applications should not call
	** [sqlite3_file_control()] with this opcode as doing so may disrupt the
	** operation of the specialized VFSes that do require it.
	**
** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]]	** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]]
** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic	** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic
** retry counts and intervals for certain disk I/O operations for the	** retry counts and intervals for certain disk I/O operations for the
Line 835 struct sqlite3_io_methods {	Line 897 struct sqlite3_io_methods {
** pointer in case this file-control is not implemented. This file-control	** pointer in case this file-control is not implemented. This file-control
** is intended for diagnostic use only.	** is intended for diagnostic use only.
**	**
	** <li>[[SQLITE_FCNTL_VFS_POINTER]]
	** ^The [SQLITE_FCNTL_VFS_POINTER] opcode finds a pointer to the top-level
	** [VFSes] currently in use. ^(The argument X in
	** sqlite3_file_control(db,SQLITE_FCNTL_VFS_POINTER,X) must be
	of type "[sqlite3_vfs] ". This opcodes will set *X
	** to a pointer to the top-level VFS.)^
	** ^When there are multiple VFS shims in the stack, this opcode finds the
	** upper-most shim only.
	**
** <li>[[SQLITE_FCNTL_PRAGMA]]	** <li>[[SQLITE_FCNTL_PRAGMA]]
** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA]	** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA]
** file control is sent to the open [sqlite3_file] object corresponding	** file control is sent to the open [sqlite3_file] object corresponding
Line 851 struct sqlite3_io_methods {	Line 922 struct sqlite3_io_methods {
** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA]	** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA]
** file control returns [SQLITE_OK], then the parser assumes that the	** file control returns [SQLITE_OK], then the parser assumes that the
** VFS has handled the PRAGMA itself and the parser generates a no-op	** VFS has handled the PRAGMA itself and the parser generates a no-op
** prepared statement. ^If the [SQLITE_FCNTL_PRAGMA] file control returns	** prepared statement if result string is NULL, or that returns a copy
	** of the result string if the string is non-NULL.
	** ^If the [SQLITE_FCNTL_PRAGMA] file control returns
** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means	** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means
** that the VFS encountered an error while handling the [PRAGMA] and the	** that the VFS encountered an error while handling the [PRAGMA] and the
** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA]	** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA]
Line 859 struct sqlite3_io_methods {	Line 932 struct sqlite3_io_methods {
** it is able to override built-in [PRAGMA] statements.	** it is able to override built-in [PRAGMA] statements.
**	**
** <li>[[SQLITE_FCNTL_BUSYHANDLER]]	** <li>[[SQLITE_FCNTL_BUSYHANDLER]]
** ^This file-control may be invoked by SQLite on the database file handle	** ^The [SQLITE_FCNTL_BUSYHANDLER]
	** file-control may be invoked by SQLite on the database file handle
** shortly after it is opened in order to provide a custom VFS with access	** shortly after it is opened in order to provide a custom VFS with access
to the connections busy-handler callback. The argument is of type (void )	to the connections busy-handler callback. The argument is of type (void )
** - an array of two (void ) values. The first (void ) actually points	** - an array of two (void ) values. The first (void ) actually points
Line 870 struct sqlite3_io_methods {	Line 944 struct sqlite3_io_methods {
** current operation.	** current operation.
**	**
** <li>[[SQLITE_FCNTL_TEMPFILENAME]]	** <li>[[SQLITE_FCNTL_TEMPFILENAME]]
** ^Application can invoke this file-control to have SQLite generate a	** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control
	** to have SQLite generate a
** temporary filename using the same algorithm that is followed to generate	** temporary filename using the same algorithm that is followed to generate
** temporary filenames for TEMP tables and other internal uses. The	** temporary filenames for TEMP tables and other internal uses. The
argument should be a char which will be filled with the filename	argument should be a char which will be filled with the filename
** written into memory obtained from [sqlite3_malloc()]. The caller should	** written into memory obtained from [sqlite3_malloc()]. The caller should
** invoke [sqlite3_free()] on the result to avoid a memory leak.	** invoke [sqlite3_free()] on the result to avoid a memory leak.
**	**
	** <li>[[SQLITE_FCNTL_MMAP_SIZE]]
	** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the
	** maximum number of bytes that will be used for memory-mapped I/O.
	** The argument is a pointer to a value of type sqlite3_int64 that
	** is an advisory maximum number of bytes in the file to memory map. The
	** pointer is overwritten with the old value. The limit is not changed if
	** the value originally pointed to is negative, and so the current limit
	** can be queried by passing in a pointer to a negative number. This
	** file-control is used internally to implement [PRAGMA mmap_size].
	**
	** <li>[[SQLITE_FCNTL_TRACE]]
	** The [SQLITE_FCNTL_TRACE] file control provides advisory information
	** to the VFS about what the higher layers of the SQLite stack are doing.
	** This file control is used by some VFS activity tracing [shims].
	** The argument is a zero-terminated string. Higher layers in the
	** SQLite stack may generate instances of this file control if
	** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled.
	**
	** <li>[[SQLITE_FCNTL_HAS_MOVED]]
	** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a
	** pointer to an integer and it writes a boolean into that integer depending
	** on whether or not the file has been renamed, moved, or deleted since it
	** was first opened.
	**
	** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
	** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This
	** opcode causes the xFileControl method to swap the file handle with the one
	** pointed to by the pArg argument. This capability is used during testing
	** and only needs to be supported when SQLITE_TEST is defined.
	**
	** <li>[[SQLITE_FCNTL_WAL_BLOCK]]
	** The [SQLITE_FCNTL_WAL_BLOCK] is a signal to the VFS layer that it might
	** be advantageous to block on the next WAL lock if the lock is not immediately
	** available. The WAL subsystem issues this signal during rare
	** circumstances in order to fix a problem with priority inversion.
	** Applications should <em>not</em> use this file-control.
	**
	** <li>[[SQLITE_FCNTL_ZIPVFS]]
	** The [SQLITE_FCNTL_ZIPVFS] opcode is implemented by zipvfs only. All other
	** VFS should return SQLITE_NOTFOUND for this opcode.
	**
	** <li>[[SQLITE_FCNTL_RBU]]
	** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
	** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for
	** this opcode.
** </ul>	** </ul>
*/	*/
#define SQLITE_FCNTL_LOCKSTATE 1	#define SQLITE_FCNTL_LOCKSTATE 1
#define SQLITE_GET_LOCKPROXYFILE 2	#define SQLITE_FCNTL_GET_LOCKPROXYFILE 2
#define SQLITE_SET_LOCKPROXYFILE 3	#define SQLITE_FCNTL_SET_LOCKPROXYFILE 3
#define SQLITE_LAST_ERRNO 4	#define SQLITE_FCNTL_LAST_ERRNO 4
#define SQLITE_FCNTL_SIZE_HINT 5	#define SQLITE_FCNTL_SIZE_HINT 5
#define SQLITE_FCNTL_CHUNK_SIZE 6	#define SQLITE_FCNTL_CHUNK_SIZE 6
#define SQLITE_FCNTL_FILE_POINTER 7	#define SQLITE_FCNTL_FILE_POINTER 7
Line 895 struct sqlite3_io_methods {	Line 1015 struct sqlite3_io_methods {
#define SQLITE_FCNTL_PRAGMA 14	#define SQLITE_FCNTL_PRAGMA 14
#define SQLITE_FCNTL_BUSYHANDLER 15	#define SQLITE_FCNTL_BUSYHANDLER 15
#define SQLITE_FCNTL_TEMPFILENAME 16	#define SQLITE_FCNTL_TEMPFILENAME 16
	#define SQLITE_FCNTL_MMAP_SIZE 18
	#define SQLITE_FCNTL_TRACE 19
	#define SQLITE_FCNTL_HAS_MOVED 20
	#define SQLITE_FCNTL_SYNC 21
	#define SQLITE_FCNTL_COMMIT_PHASETWO 22
	#define SQLITE_FCNTL_WIN32_SET_HANDLE 23
	#define SQLITE_FCNTL_WAL_BLOCK 24
	#define SQLITE_FCNTL_ZIPVFS 25
	#define SQLITE_FCNTL_RBU 26
	#define SQLITE_FCNTL_VFS_POINTER 27
	#define SQLITE_FCNTL_JOURNAL_POINTER 28

	/* deprecated names */
	#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
	#define SQLITE_SET_LOCKPROXYFILE SQLITE_FCNTL_SET_LOCKPROXYFILE
	#define SQLITE_LAST_ERRNO SQLITE_FCNTL_LAST_ERRNO


/*	/*
** CAPI3REF: Mutex Handle	** CAPI3REF: Mutex Handle
**	**
Line 909 struct sqlite3_io_methods {	Line 1046 struct sqlite3_io_methods {
typedef struct sqlite3_mutex sqlite3_mutex;	typedef struct sqlite3_mutex sqlite3_mutex;

/*	/*
	** CAPI3REF: Loadable Extension Thunk
	**
	** A pointer to the opaque sqlite3_api_routines structure is passed as
	** the third parameter to entry points of [loadable extensions]. This
	** structure must be typedefed in order to work around compiler warnings
	** on some platforms.
	*/
	typedef struct sqlite3_api_routines sqlite3_api_routines;

	/*
** CAPI3REF: OS Interface Object	** CAPI3REF: OS Interface Object
**	**
** An instance of the sqlite3_vfs object defines the interface between	** An instance of the sqlite3_vfs object defines the interface between
Line 1101 struct sqlite3_vfs {	Line 1248 struct sqlite3_vfs {
const char (xNextSystemCall)(sqlite3_vfs, const char zName);	const char (xNextSystemCall)(sqlite3_vfs, const char zName);
/*	/*
** The methods above are in versions 1 through 3 of the sqlite_vfs object.	** The methods above are in versions 1 through 3 of the sqlite_vfs object.
** New fields may be appended in figure versions. The iVersion	** New fields may be appended in future versions. The iVersion
** value will increment whenever this happens.	** value will increment whenever this happens.
*/	*/
};	};
Line 1146 struct sqlite3_vfs {	Line 1293 struct sqlite3_vfs {
** </ul>	** </ul>
**	**
** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as	** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as
** was given no the corresponding lock.	** was given on the corresponding lock.
**	**
** The xShmLock method can transition between unlocked and SHARED or	** The xShmLock method can transition between unlocked and SHARED or
** between unlocked and EXCLUSIVE. It cannot transition between SHARED	** between unlocked and EXCLUSIVE. It cannot transition between SHARED
Line 1257 SQLITE_API int sqlite3_os_end(void);	Line 1404 SQLITE_API int sqlite3_os_end(void);
** applications and so this routine is usually not necessary. It is	** applications and so this routine is usually not necessary. It is
** provided to support rare applications with unusual needs.	** provided to support rare applications with unusual needs.
**	**
** The sqlite3_config() interface is not threadsafe. The application	** <b>The sqlite3_config() interface is not threadsafe. The application
** must insure that no other SQLite interfaces are invoked by other	** must ensure that no other SQLite interfaces are invoked by other
** threads while sqlite3_config() is running. Furthermore, sqlite3_config()	** threads while sqlite3_config() is running.</b>
	**
	** The sqlite3_config() interface
** may only be invoked prior to library initialization using	** may only be invoked prior to library initialization using
** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].	** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
** ^If sqlite3_config() is called after [sqlite3_initialize()] and before	** ^If sqlite3_config() is called after [sqlite3_initialize()] and before
Line 1281 SQLITE_API int sqlite3_config(int, ...);	Line 1430 SQLITE_API int sqlite3_config(int, ...);

/*	/*
** CAPI3REF: Configure database connections	** CAPI3REF: Configure database connections
	** METHOD: sqlite3
**	**
** The sqlite3_db_config() interface is used to make configuration	** The sqlite3_db_config() interface is used to make configuration
** changes to a [database connection]. The interface is similar to	** changes to a [database connection]. The interface is similar to
Line 1339 SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...	Line 1489 SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...
** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0,	** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0,
** that causes the corresponding memory allocation to fail.	** that causes the corresponding memory allocation to fail.
**	**
** The xInit method initializes the memory allocator. (For example,	** The xInit method initializes the memory allocator. For example,
** it might allocate any require mutexes or initialize internal data	** it might allocate any require mutexes or initialize internal data
** structures. The xShutdown method is invoked (indirectly) by	** structures. The xShutdown method is invoked (indirectly) by
** [sqlite3_shutdown()] and should deallocate any resources acquired	** [sqlite3_shutdown()] and should deallocate any resources acquired
Line 1429 struct sqlite3_mem_methods {	Line 1579 struct sqlite3_mem_methods {
** SQLITE_CONFIG_SERIALIZED configuration option.</dd>	** SQLITE_CONFIG_SERIALIZED configuration option.</dd>
**	**
** [[SQLITE_CONFIG_MALLOC]] <dt>SQLITE_CONFIG_MALLOC</dt>	** [[SQLITE_CONFIG_MALLOC]] <dt>SQLITE_CONFIG_MALLOC</dt>
** <dd> ^(This option takes a single argument which is a pointer to an	** <dd> ^(The SQLITE_CONFIG_MALLOC option takes a single argument which is
** instance of the [sqlite3_mem_methods] structure. The argument specifies	** a pointer to an instance of the [sqlite3_mem_methods] structure.
	** The argument specifies
** alternative low-level memory allocation routines to be used in place of	** alternative low-level memory allocation routines to be used in place of
** the memory allocation routines built into SQLite.)^ ^SQLite makes	** the memory allocation routines built into SQLite.)^ ^SQLite makes
** its own private copy of the content of the [sqlite3_mem_methods] structure	** its own private copy of the content of the [sqlite3_mem_methods] structure
** before the [sqlite3_config()] call returns.</dd>	** before the [sqlite3_config()] call returns.</dd>
**	**
** [[SQLITE_CONFIG_GETMALLOC]] <dt>SQLITE_CONFIG_GETMALLOC</dt>	** [[SQLITE_CONFIG_GETMALLOC]] <dt>SQLITE_CONFIG_GETMALLOC</dt>
** <dd> ^(This option takes a single argument which is a pointer to an	** <dd> ^(The SQLITE_CONFIG_GETMALLOC option takes a single argument which
** instance of the [sqlite3_mem_methods] structure. The [sqlite3_mem_methods]	** is a pointer to an instance of the [sqlite3_mem_methods] structure.
	** The [sqlite3_mem_methods]
** structure is filled with the currently defined memory allocation routines.)^	** structure is filled with the currently defined memory allocation routines.)^
** This option can be used to overload the default memory allocation	** This option can be used to overload the default memory allocation
** routines with a wrapper that simulations memory allocation failure or	** routines with a wrapper that simulations memory allocation failure or
** tracks memory usage, for example. </dd>	** tracks memory usage, for example. </dd>
**	**
** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt>	** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt>
** <dd> ^This option takes single argument of type int, interpreted as a	** <dd> ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int,
** boolean, which enables or disables the collection of memory allocation	** interpreted as a boolean, which enables or disables the collection of
** statistics. ^(When memory allocation statistics are disabled, the	** memory allocation statistics. ^(When memory allocation statistics are
** following SQLite interfaces become non-operational:	** disabled, the following SQLite interfaces become non-operational:
** <ul>	** <ul>
** <li> [sqlite3_memory_used()]	** <li> [sqlite3_memory_used()]
** <li> [sqlite3_memory_highwater()]	** <li> [sqlite3_memory_highwater()]
** <li> [sqlite3_soft_heap_limit64()]	** <li> [sqlite3_soft_heap_limit64()]
** <li> [sqlite3_status()]	** <li> [sqlite3_status64()]
** </ul>)^	** </ul>)^
** ^Memory allocation statistics are enabled by default unless SQLite is	** ^Memory allocation statistics are enabled by default unless SQLite is
** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory	** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory
Line 1461 struct sqlite3_mem_methods {	Line 1613 struct sqlite3_mem_methods {
** </dd>	** </dd>
**	**
** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt>	** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt>
** <dd> ^This option specifies a static memory buffer that SQLite can use for	** <dd> ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer
** scratch memory. There are three arguments: A pointer an 8-byte	** that SQLite can use for scratch memory. ^(There are three arguments
	** to SQLITE_CONFIG_SCRATCH: A pointer an 8-byte
** aligned memory buffer from which the scratch allocations will be	** aligned memory buffer from which the scratch allocations will be
** drawn, the size of each scratch allocation (sz),	** drawn, the size of each scratch allocation (sz),
** and the maximum number of scratch allocations (N). The sz	** and the maximum number of scratch allocations (N).)^
** argument must be a multiple of 16.
** The first argument must be a pointer to an 8-byte aligned buffer	** The first argument must be a pointer to an 8-byte aligned buffer
** of at least sz*N bytes of memory.	** of at least sz*N bytes of memory.
** ^SQLite will use no more than two scratch buffers per thread. So	** ^SQLite will not use more than one scratch buffers per thread.
** N should be set to twice the expected maximum number of threads.	** ^SQLite will never request a scratch buffer that is more than 6
** ^SQLite will never require a scratch buffer that is more than 6	** times the database page size.
** times the database page size. ^If SQLite needs needs additional	** ^If SQLite needs needs additional
** scratch memory beyond what is provided by this configuration option, then	** scratch memory beyond what is provided by this configuration option, then
** [sqlite3_malloc()] will be used to obtain the memory needed.</dd>	** [sqlite3_malloc()] will be used to obtain the memory needed.<p>
	** ^When the application provides any amount of scratch memory using
	** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large
	** [sqlite3_malloc\|heap allocations].
	** This can help [Robson proof\|prevent memory allocation failures] due to heap
	** fragmentation in low-memory embedded systems.
	** </dd>
**	**
** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>	** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
** <dd> ^This option specifies a static memory buffer that SQLite can use for	** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool
** the database page cache with the default page cache implementation.	** that SQLite can use for the database page cache with the default page
** This configuration should not be used if an application-define page	** cache implementation.
** cache implementation is loaded using the SQLITE_CONFIG_PCACHE2 option.	** This configuration option is a no-op if an application-define page
** There are three arguments to this option: A pointer to 8-byte aligned	** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2].
** memory, the size of each page buffer (sz), and the number of pages (N).	** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
	** 8-byte aligned memory (pMem), the size of each page cache line (sz),
	** and the number of cache lines (N).
** The sz argument should be the size of the largest database page	** The sz argument should be the size of the largest database page
** (a power of two between 512 and 32768) plus a little extra for each	** (a power of two between 512 and 65536) plus some extra bytes for each
** page header. ^The page header size is 20 to 40 bytes depending on	** page header. ^The number of extra bytes needed by the page header
** the host architecture. ^It is harmless, apart from the wasted memory,	** can be determined using [SQLITE_CONFIG_PCACHE_HDRSZ].
** to make sz a little too large. The first	** ^It is harmless, apart from the wasted memory,
** argument should point to an allocation of at least sz*N bytes of memory.	** for the sz parameter to be larger than necessary. The pMem
** ^SQLite will use the memory provided by the first argument to satisfy its	** argument must be either a NULL pointer or a pointer to an 8-byte
** memory needs for the first N pages that it adds to cache. ^If additional	** aligned block of memory of at least sz*N bytes, otherwise
** page cache memory is needed beyond what is provided by this option, then	** subsequent behavior is undefined.
** SQLite goes to [sqlite3_malloc()] for the additional storage space.	** ^When pMem is not NULL, SQLite will strive to use the memory provided
** The pointer in the first argument must	** to satisfy page cache needs, falling back to [sqlite3_malloc()] if
** be aligned to an 8-byte boundary or subsequent behavior of SQLite	** a page cache line is larger than sz bytes or if all of the pMem buffer
** will be undefined.</dd>	** is exhausted.
	** ^If pMem is NULL and N is non-zero, then each database connection
	** does an initial bulk allocation for page cache memory
	** from [sqlite3_malloc()] sufficient for N cache lines if N is positive or
	** of -1024*N bytes if N is negative, . ^If additional
	** page cache memory is needed beyond what is provided by the initial
	** allocation, then SQLite goes to [sqlite3_malloc()] separately for each
	** additional cache line. </dd>
**	**
** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>	** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
** <dd> ^This option specifies a static memory buffer that SQLite will use	** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer
** for all of its dynamic memory allocation needs beyond those provided	** that SQLite will use for all of its dynamic memory allocation needs
** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE].	** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and
** There are three arguments: An 8-byte aligned pointer to the memory,	** [SQLITE_CONFIG_PAGECACHE].
	** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled
	** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns
	** [SQLITE_ERROR] if invoked otherwise.
	** ^There are three arguments to SQLITE_CONFIG_HEAP:
	** An 8-byte aligned pointer to the memory,
** the number of bytes in the memory buffer, and the minimum allocation size.	** the number of bytes in the memory buffer, and the minimum allocation size.
** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts	** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts
** to using its default memory allocator (the system malloc() implementation),	** to using its default memory allocator (the system malloc() implementation),
** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the	** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the
** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or	** memory pointer is not NULL then the alternative memory
** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory
** allocator is engaged to handle all of SQLites memory allocation needs.	** allocator is engaged to handle all of SQLites memory allocation needs.
** The first pointer (the memory pointer) must be aligned to an 8-byte	** The first pointer (the memory pointer) must be aligned to an 8-byte
** boundary or subsequent behavior of SQLite will be undefined.	** boundary or subsequent behavior of SQLite will be undefined.
Line 1515 struct sqlite3_mem_methods {	Line 1686 struct sqlite3_mem_methods {
for the minimum allocation size are 25 through 2**8.</dd>	for the minimum allocation size are 25 through 2**8.</dd>
**	**
** [[SQLITE_CONFIG_MUTEX]] <dt>SQLITE_CONFIG_MUTEX</dt>	** [[SQLITE_CONFIG_MUTEX]] <dt>SQLITE_CONFIG_MUTEX</dt>
** <dd> ^(This option takes a single argument which is a pointer to an	** <dd> ^(The SQLITE_CONFIG_MUTEX option takes a single argument which is a
** instance of the [sqlite3_mutex_methods] structure. The argument specifies	** pointer to an instance of the [sqlite3_mutex_methods] structure.
** alternative low-level mutex routines to be used in place	** The argument specifies alternative low-level mutex routines to be used
** the mutex routines built into SQLite.)^ ^SQLite makes a copy of the	** in place the mutex routines built into SQLite.)^ ^SQLite makes a copy of
** content of the [sqlite3_mutex_methods] structure before the call to	** the content of the [sqlite3_mutex_methods] structure before the call to
** [sqlite3_config()] returns. ^If SQLite is compiled with	** [sqlite3_config()] returns. ^If SQLite is compiled with
** the [SQLITE_THREADSAFE \| SQLITE_THREADSAFE=0] compile-time option then	** the [SQLITE_THREADSAFE \| SQLITE_THREADSAFE=0] compile-time option then
** the entire mutexing subsystem is omitted from the build and hence calls to	** the entire mutexing subsystem is omitted from the build and hence calls to
Line 1527 struct sqlite3_mem_methods {	Line 1698 struct sqlite3_mem_methods {
** return [SQLITE_ERROR].</dd>	** return [SQLITE_ERROR].</dd>
**	**
** [[SQLITE_CONFIG_GETMUTEX]] <dt>SQLITE_CONFIG_GETMUTEX</dt>	** [[SQLITE_CONFIG_GETMUTEX]] <dt>SQLITE_CONFIG_GETMUTEX</dt>
** <dd> ^(This option takes a single argument which is a pointer to an	** <dd> ^(The SQLITE_CONFIG_GETMUTEX option takes a single argument which
** instance of the [sqlite3_mutex_methods] structure. The	** is a pointer to an instance of the [sqlite3_mutex_methods] structure. The
** [sqlite3_mutex_methods]	** [sqlite3_mutex_methods]
** structure is filled with the currently defined mutex routines.)^	** structure is filled with the currently defined mutex routines.)^
** This option can be used to overload the default mutex allocation	** This option can be used to overload the default mutex allocation
Line 1540 struct sqlite3_mem_methods {	Line 1711 struct sqlite3_mem_methods {
** return [SQLITE_ERROR].</dd>	** return [SQLITE_ERROR].</dd>
**	**
** [[SQLITE_CONFIG_LOOKASIDE]] <dt>SQLITE_CONFIG_LOOKASIDE</dt>	** [[SQLITE_CONFIG_LOOKASIDE]] <dt>SQLITE_CONFIG_LOOKASIDE</dt>
** <dd> ^(This option takes two arguments that determine the default	** <dd> ^(The SQLITE_CONFIG_LOOKASIDE option takes two arguments that determine
** memory allocation for the lookaside memory allocator on each	** the default size of lookaside memory on each [database connection].
** [database connection]. The first argument is the	** The first argument is the
** size of each lookaside buffer slot and the second is the number of	** size of each lookaside buffer slot and the second is the number of
** slots allocated to each database connection.)^ ^(This option sets the	** slots allocated to each database connection.)^ ^(SQLITE_CONFIG_LOOKASIDE
** <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]	** sets the <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
** verb to [sqlite3_db_config()] can be used to change the lookaside	** option to [sqlite3_db_config()] can be used to change the lookaside
** configuration on individual connections.)^ </dd>	** configuration on individual connections.)^ </dd>
**	**
** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt>	** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt>
** <dd> ^(This option takes a single argument which is a pointer to	** <dd> ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is
** an [sqlite3_pcache_methods2] object. This object specifies the interface	** a pointer to an [sqlite3_pcache_methods2] object. This object specifies
** to a custom page cache implementation.)^ ^SQLite makes a copy of the	** the interface to a custom page cache implementation.)^
** object and uses it for page cache memory allocations.</dd>	** ^SQLite makes a copy of the [sqlite3_pcache_methods2] object.</dd>
**	**
** [[SQLITE_CONFIG_GETPCACHE2]] <dt>SQLITE_CONFIG_GETPCACHE2</dt>	** [[SQLITE_CONFIG_GETPCACHE2]] <dt>SQLITE_CONFIG_GETPCACHE2</dt>
** <dd> ^(This option takes a single argument which is a pointer to an	** <dd> ^(The SQLITE_CONFIG_GETPCACHE2 option takes a single argument which
** [sqlite3_pcache_methods2] object. SQLite copies of the current	** is a pointer to an [sqlite3_pcache_methods2] object. SQLite copies of
** page cache implementation into that object.)^ </dd>	** the current page cache implementation into that object.)^ </dd>
**	**
** [[SQLITE_CONFIG_LOG]] <dt>SQLITE_CONFIG_LOG</dt>	** [[SQLITE_CONFIG_LOG]] <dt>SQLITE_CONFIG_LOG</dt>
** <dd> ^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a	** <dd> The SQLITE_CONFIG_LOG option is used to configure the SQLite
	** global [error log].
	** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a
** function with a call signature of void()(void,int,const char*),	** function with a call signature of void()(void,int,const char*),
** and a pointer to void. ^If the function pointer is not NULL, it is	** and a pointer to void. ^If the function pointer is not NULL, it is
** invoked by [sqlite3_log()] to process each logging event. ^If the	** invoked by [sqlite3_log()] to process each logging event. ^If the
Line 1579 struct sqlite3_mem_methods {	Line 1752 struct sqlite3_mem_methods {
** function must be threadsafe. </dd>	** function must be threadsafe. </dd>
**	**
** [[SQLITE_CONFIG_URI]] <dt>SQLITE_CONFIG_URI	** [[SQLITE_CONFIG_URI]] <dt>SQLITE_CONFIG_URI
** <dd> This option takes a single argument of type int. If non-zero, then	** <dd>^(The SQLITE_CONFIG_URI option takes a single argument of type int.
** URI handling is globally enabled. If the parameter is zero, then URI handling	** If non-zero, then URI handling is globally enabled. If the parameter is zero,
** is globally disabled. If URI handling is globally enabled, all filenames	** then URI handling is globally disabled.)^ ^If URI handling is globally
** passed to [sqlite3_open()], [sqlite3_open_v2()], [sqlite3_open16()] or	** enabled, all filenames passed to [sqlite3_open()], [sqlite3_open_v2()],
	** [sqlite3_open16()] or
** specified as part of [ATTACH] commands are interpreted as URIs, regardless	** specified as part of [ATTACH] commands are interpreted as URIs, regardless
** of whether or not the [SQLITE_OPEN_URI] flag is set when the database	** of whether or not the [SQLITE_OPEN_URI] flag is set when the database
** connection is opened. If it is globally disabled, filenames are	** connection is opened. ^If it is globally disabled, filenames are
** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the	** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the
** database connection is opened. By default, URI handling is globally	** database connection is opened. ^(By default, URI handling is globally
** disabled. The default value may be changed by compiling with the	** disabled. The default value may be changed by compiling with the
** [SQLITE_USE_URI] symbol defined.	** [SQLITE_USE_URI] symbol defined.)^
**	**
** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]] <dt>SQLITE_CONFIG_COVERING_INDEX_SCAN	** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]] <dt>SQLITE_CONFIG_COVERING_INDEX_SCAN
** <dd> This option takes a single integer argument which is interpreted as	** <dd>^The SQLITE_CONFIG_COVERING_INDEX_SCAN option takes a single integer
** a boolean in order to enable or disable the use of covering indices for	** argument which is interpreted as a boolean in order to enable or disable
** full table scans in the query optimizer. The default setting is determined	** the use of covering indices for full table scans in the query optimizer.
	** ^The default setting is determined
** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on"	** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on"
** if that compile-time option is omitted.	** if that compile-time option is omitted.
** The ability to disable the use of covering indices for full table scans	** The ability to disable the use of covering indices for full table scans
** is because some incorrectly coded legacy applications might malfunction	** is because some incorrectly coded legacy applications might malfunction
** malfunction when the optimization is enabled. Providing the ability to	** when the optimization is enabled. Providing the ability to
** disable the optimization allows the older, buggy application code to work	** disable the optimization allows the older, buggy application code to work
** without change even with newer versions of SQLite.	** without change even with newer versions of SQLite.
**	**
Line 1607 struct sqlite3_mem_methods {	Line 1782 struct sqlite3_mem_methods {
** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE	** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
** <dd> These options are obsolete and should not be used by new code.	** <dd> These options are obsolete and should not be used by new code.
** They are retained for backwards compatibility but are now no-ops.	** They are retained for backwards compatibility but are now no-ops.
** </dl>	** </dd>
**	**
** [[SQLITE_CONFIG_SQLLOG]]	** [[SQLITE_CONFIG_SQLLOG]]
** <dt>SQLITE_CONFIG_SQLLOG	** <dt>SQLITE_CONFIG_SQLLOG
** <dd>This option is only available if sqlite is compiled with the	** <dd>This option is only available if sqlite is compiled with the
** SQLITE_ENABLE_SQLLOG pre-processor macro defined. The first argument should	** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should
** be a pointer to a function of type void()(void,sqlite3,const char, int).	** be a pointer to a function of type void()(void,sqlite3,const char, int).
** The second should be of type (void*). The callback is invoked by the library	** The second should be of type (void*). The callback is invoked by the library
** in three separate circumstances, identified by the value passed as the	** in three separate circumstances, identified by the value passed as the
Line 1622 struct sqlite3_mem_methods {	Line 1797 struct sqlite3_mem_methods {
** fourth parameter is 1, then the SQL statement that the third parameter	** fourth parameter is 1, then the SQL statement that the third parameter
** points to has just been executed. Or, if the fourth parameter is 2, then	** points to has just been executed. Or, if the fourth parameter is 2, then
** the connection being passed as the second parameter is being closed. The	** the connection being passed as the second parameter is being closed. The
** third parameter is passed NULL In this case.	** third parameter is passed NULL In this case. An example of using this
	** configuration option can be seen in the "test_sqllog.c" source file in
	** the canonical SQLite source tree.</dd>
	**
	** [[SQLITE_CONFIG_MMAP_SIZE]]
	** <dt>SQLITE_CONFIG_MMAP_SIZE
	** <dd>^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values
	** that are the default mmap size limit (the default setting for
	** [PRAGMA mmap_size]) and the maximum allowed mmap size limit.
	** ^The default setting can be overridden by each database connection using
	** either the [PRAGMA mmap_size] command, or by using the
	** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size
	** will be silently truncated if necessary so that it does not exceed the
	** compile-time maximum mmap size set by the
	** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^
	** ^If either argument to this option is negative, then that argument is
	** changed to its compile-time default.
	**
	** [[SQLITE_CONFIG_WIN32_HEAPSIZE]]
	** <dt>SQLITE_CONFIG_WIN32_HEAPSIZE
	** <dd>^The SQLITE_CONFIG_WIN32_HEAPSIZE option is only available if SQLite is
	** compiled for Windows with the [SQLITE_WIN32_MALLOC] pre-processor macro
	** defined. ^SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value
	** that specifies the maximum size of the created heap.
	**
	** [[SQLITE_CONFIG_PCACHE_HDRSZ]]
	** <dt>SQLITE_CONFIG_PCACHE_HDRSZ
	** <dd>^The SQLITE_CONFIG_PCACHE_HDRSZ option takes a single parameter which
	** is a pointer to an integer and writes into that integer the number of extra
	** bytes per page required for each page in [SQLITE_CONFIG_PAGECACHE].
	** The amount of extra space required can change depending on the compiler,
	** target platform, and SQLite version.
	**
	** [[SQLITE_CONFIG_PMASZ]]
	** <dt>SQLITE_CONFIG_PMASZ
	** <dd>^The SQLITE_CONFIG_PMASZ option takes a single parameter which
	** is an unsigned integer and sets the "Minimum PMA Size" for the multithreaded
	** sorter to that integer. The default minimum PMA Size is set by the
	** [SQLITE_SORTER_PMASZ] compile-time option. New threads are launched
	** to help with sort operations when multithreaded sorting
	** is enabled (using the [PRAGMA threads] command) and the amount of content
	** to be sorted exceeds the page size times the minimum of the
	** [PRAGMA cache_size] setting and this value.
	**
	** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
	** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
	** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
	** becomes the [statement journal] spill-to-disk threshold.
	** [Statement journals] are held in memory until their size (in bytes)
	** exceeds this threshold, at which point they are written to disk.
	** Or if the threshold is -1, statement journals are always held
	** exclusively in memory.
	** Since many statement journals never become large, setting the spill
	** threshold to a value such as 64KiB can greatly reduce the amount of
	** I/O required to support statement rollback.
	** The default value for this setting is controlled by the
	** [SQLITE_STMTJRNL_SPILL] compile-time option.
** </dl>	** </dl>
*/	*/
#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */	#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */
Line 1646 struct sqlite3_mem_methods {	Line 1877 struct sqlite3_mem_methods {
#define SQLITE_CONFIG_GETPCACHE2 19 /* sqlite3_pcache_methods2* */	#define SQLITE_CONFIG_GETPCACHE2 19 /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20 /* int */	#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20 /* int */
#define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */	#define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */
	#define SQLITE_CONFIG_MMAP_SIZE 22 /* sqlite3_int64, sqlite3_int64 */
	#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */
	#define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int psz /
	#define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */
	#define SQLITE_CONFIG_STMTJRNL_SPILL 26 /* int nByte */

/*	/*
** CAPI3REF: Database Connection Configuration Options	** CAPI3REF: Database Connection Configuration Options
Line 1703 struct sqlite3_mem_methods {	Line 1939 struct sqlite3_mem_methods {
** following this call. The second parameter may be a NULL pointer, in	** following this call. The second parameter may be a NULL pointer, in
** which case the trigger setting is not reported back. </dd>	** which case the trigger setting is not reported back. </dd>
**	**
	** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt>
	** <dd> ^This option is used to enable or disable the two-argument
	** version of the [fts3_tokenizer()] function which is part of the
	** [FTS3] full-text search engine extension.
	** There should be two additional arguments.
	** The first argument is an integer which is 0 to disable fts3_tokenizer() or
	** positive to enable fts3_tokenizer() or negative to leave the setting
	** unchanged.
	** The second parameter is a pointer to an integer into which
	** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled
	** following this call. The second parameter may be a NULL pointer, in
	** which case the new setting is not reported back. </dd>
	**
	** <dt>SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION</dt>
	** <dd> ^This option is used to enable or disable the [sqlite3_load_extension()]
	** interface independently of the [load_extension()] SQL function.
	** The [sqlite3_enable_load_extension()] API enables or disables both the
	** C-API [sqlite3_load_extension()] and the SQL function [load_extension()].
	** There should be two additional arguments.
	** When the first argument to this interface is 1, then only the C-API is
	** enabled and the SQL function remains disabled. If the first argument to
	** this interface is 0, then both the C-API and the SQL function are disabled.
	** If the first argument is -1, then no changes are made to state of either the
	** C-API or the SQL function.
	** The second parameter is a pointer to an integer into which
	** is written 0 or 1 to indicate whether [sqlite3_load_extension()] interface
	** is disabled or enabled following this call. The second parameter may
	** be a NULL pointer, in which case the new setting is not reported back.
	** </dd>
	**
** </dl>	** </dl>
*/	*/
#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */	#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */	#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */	#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */
	#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
	#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */


/*	/*
** CAPI3REF: Enable Or Disable Extended Result Codes	** CAPI3REF: Enable Or Disable Extended Result Codes
	** METHOD: sqlite3
**	**
** ^The sqlite3_extended_result_codes() routine enables or disables the	** ^The sqlite3_extended_result_codes() routine enables or disables the
** [extended result codes] feature of SQLite. ^The extended result	** [extended result codes] feature of SQLite. ^The extended result
Line 1721 SQLITE_API int sqlite3_extended_result_codes(sqlite3*,	Line 1990 SQLITE_API int sqlite3_extended_result_codes(sqlite3*,

/*	/*
** CAPI3REF: Last Insert Rowid	** CAPI3REF: Last Insert Rowid
	** METHOD: sqlite3
**	**
** ^Each entry in an SQLite table has a unique 64-bit signed	** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables)
	** has a unique 64-bit signed
** integer key called the [ROWID \| "rowid"]. ^The rowid is always available	** integer key called the [ROWID \| "rowid"]. ^The rowid is always available
** as an undeclared column named ROWID, OID, or _ROWID_ as long as those	** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
** names are not also used by explicitly declared columns. ^If	** names are not also used by explicitly declared columns. ^If
** the table has a column of type [INTEGER PRIMARY KEY] then that column	** the table has a column of type [INTEGER PRIMARY KEY] then that column
** is another alias for the rowid.	** is another alias for the rowid.
**	**
** ^This routine returns the [rowid] of the most recent	** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the
** successful [INSERT] into the database from the [database connection]	** most recent successful [INSERT] into a rowid table or [virtual table]
** in the first argument. ^As of SQLite version 3.7.7, this routines	** on database connection D.
** records the last insert rowid of both ordinary tables and [virtual tables].	** ^Inserts into [WITHOUT ROWID] tables are not recorded.
** ^If no successful [INSERT]s	** ^If no successful [INSERT]s into rowid tables
** have ever occurred on that database connection, zero is returned.	** have ever occurred on the database connection D,
	** then sqlite3_last_insert_rowid(D) returns zero.
**	**
** ^(If an [INSERT] occurs within a trigger or within a [virtual table]	** ^(If an [INSERT] occurs within a trigger or within a [virtual table]
** method, then this routine will return the [rowid] of the inserted	** method, then this routine will return the [rowid] of the inserted
Line 1770 SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sql	Line 2042 SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sql

/*	/*
** CAPI3REF: Count The Number Of Rows Modified	** CAPI3REF: Count The Number Of Rows Modified
	** METHOD: sqlite3
**	**
** ^This function returns the number of database rows that were changed	** ^This function returns the number of rows modified, inserted or
** or inserted or deleted by the most recently completed SQL statement	** deleted by the most recently completed INSERT, UPDATE or DELETE
** on the [database connection] specified by the first parameter.	** statement on the database connection specified by the only parameter.
** ^(Only changes that are directly specified by the [INSERT], [UPDATE],	** ^Executing any other type of SQL statement does not modify the value
** or [DELETE] statement are counted. Auxiliary changes caused by	** returned by this function.
** triggers or [foreign key actions] are not counted.)^ Use the
** [sqlite3_total_changes()] function to find the total number of changes
** including changes caused by triggers and foreign key actions.
**	**
** ^Changes to a view that are simulated by an [INSTEAD OF trigger]	** ^Only changes made directly by the INSERT, UPDATE or DELETE statement are
** are not counted. Only real table changes are counted.	** considered - auxiliary changes caused by [CREATE TRIGGER \| triggers],
	** [foreign key actions] or [REPLACE] constraint resolution are not counted.
	**
	** Changes to a view that are intercepted by
	** [INSTEAD OF trigger \| INSTEAD OF triggers] are not counted. ^The value
	** returned by sqlite3_changes() immediately after an INSERT, UPDATE or
	** DELETE statement run on a view is always zero. Only changes made to real
	** tables are counted.
**	**
** ^(A "row change" is a change to a single row of a single table	** Things are more complicated if the sqlite3_changes() function is
** caused by an INSERT, DELETE, or UPDATE statement. Rows that	** executed while a trigger program is running. This may happen if the
** are changed as side effects of [REPLACE] constraint resolution,	** program uses the [changes() SQL function], or if some other callback
** rollback, ABORT processing, [DROP TABLE], or by any other	** function invokes sqlite3_changes() directly. Essentially:
** mechanisms do not count as direct row changes.)^	**
	** <ul>
	** <li> ^(Before entering a trigger program the value returned by
	** sqlite3_changes() function is saved. After the trigger program
	** has finished, the original value is restored.)^
	**
	** <li> ^(Within a trigger program each INSERT, UPDATE and DELETE
	** statement sets the value returned by sqlite3_changes()
	** upon completion as normal. Of course, this value will not include
	** any changes performed by sub-triggers, as the sqlite3_changes()
	** value will be saved and restored after each sub-trigger has run.)^
	** </ul>
	**
	** ^This means that if the changes() SQL function (or similar) is used
	** by the first INSERT, UPDATE or DELETE statement within a trigger, it
	** returns the value as set when the calling statement began executing.
	** ^If it is used by the second or subsequent such statement within a trigger
	** program, the value returned reflects the number of rows modified by the
	** previous INSERT, UPDATE or DELETE statement within the same trigger.
**	**
** A "trigger context" is a scope of execution that begins and
** ends with the script of a [CREATE TRIGGER \| trigger].
** Most SQL statements are
** evaluated outside of any trigger. This is the "top level"
** trigger context. If a trigger fires from the top level, a
** new trigger context is entered for the duration of that one
** trigger. Subtriggers create subcontexts for their duration.
**
** ^Calling [sqlite3_exec()] or [sqlite3_step()] recursively does
** not create a new trigger context.
**
** ^This function returns the number of direct row changes in the
** most recent INSERT, UPDATE, or DELETE statement within the same
** trigger context.
**
** ^Thus, when called from the top level, this function returns the
** number of changes in the most recent INSERT, UPDATE, or DELETE
** that also occurred at the top level. ^(Within the body of a trigger,
** the sqlite3_changes() interface can be called to find the number of
** changes in the most recently completed INSERT, UPDATE, or DELETE
** statement within the body of the same trigger.
** However, the number returned does not include changes
** caused by subtriggers since those have their own context.)^
**
** See also the [sqlite3_total_changes()] interface, the	** See also the [sqlite3_total_changes()] interface, the
** [count_changes pragma], and the [changes() SQL function].	** [count_changes pragma], and the [changes() SQL function].
**	**
Line 1824 SQLITE_API int sqlite3_changes(sqlite3*);	Line 2095 SQLITE_API int sqlite3_changes(sqlite3*);

/*	/*
** CAPI3REF: Total Number Of Rows Modified	** CAPI3REF: Total Number Of Rows Modified
	** METHOD: sqlite3
**	**
** ^This function returns the number of row changes caused by [INSERT],	** ^This function returns the total number of rows inserted, modified or
** [UPDATE] or [DELETE] statements since the [database connection] was opened.	** deleted by all [INSERT], [UPDATE] or [DELETE] statements completed
** ^(The count returned by sqlite3_total_changes() includes all changes	** since the database connection was opened, including those executed as
** from all [CREATE TRIGGER \| trigger] contexts and changes made by	** part of trigger programs. ^Executing any other type of SQL statement
** [foreign key actions]. However,	** does not affect the value returned by sqlite3_total_changes().
** the count does not include changes used to implement [REPLACE] constraints,	**
** do rollbacks or ABORT processing, or [DROP TABLE] processing. The	** ^Changes made as part of [foreign key actions] are included in the
** count does not include rows of views that fire an [INSTEAD OF trigger],	** count, but those made as part of REPLACE constraint resolution are
** though if the INSTEAD OF trigger makes changes of its own, those changes	** not. ^Changes to a view that are intercepted by INSTEAD OF triggers
** are counted.)^	** are not counted.
** ^The sqlite3_total_changes() function counts the changes as soon as	**
** the statement that makes them is completed (when the statement handle
** is passed to [sqlite3_reset()] or [sqlite3_finalize()]).
**
** See also the [sqlite3_changes()] interface, the	** See also the [sqlite3_changes()] interface, the
** [count_changes pragma], and the [total_changes() SQL function].	** [count_changes pragma], and the [total_changes() SQL function].
**	**
Line 1850 SQLITE_API int sqlite3_total_changes(sqlite3*);	Line 2119 SQLITE_API int sqlite3_total_changes(sqlite3*);

/*	/*
** CAPI3REF: Interrupt A Long-Running Query	** CAPI3REF: Interrupt A Long-Running Query
	** METHOD: sqlite3
**	**
** ^This function causes any pending database operation to abort and	** ^This function causes any pending database operation to abort and
** return at its earliest opportunity. This routine is typically	** return at its earliest opportunity. This routine is typically
Line 1925 SQLITE_API int sqlite3_complete16(const void *sql);	Line 2195 SQLITE_API int sqlite3_complete16(const void *sql);

/*	/*
** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors	** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
	** KEYWORDS: {busy-handler callback} {busy handler}
	** METHOD: sqlite3
**	**
** ^This routine sets a callback function that might be invoked whenever	** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X
** an attempt is made to open a database table that another thread	** that might be invoked with argument P whenever
** or process has locked.	** an attempt is made to access a database table associated with
	** [database connection] D when another thread
	** or process has the table locked.
	** The sqlite3_busy_handler() interface is used to implement
	** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout].
**	**
** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]	** ^If the busy callback is NULL, then [SQLITE_BUSY]
** is returned immediately upon encountering the lock. ^If the busy callback	** is returned immediately upon encountering the lock. ^If the busy callback
** is not NULL, then the callback might be invoked with two arguments.	** is not NULL, then the callback might be invoked with two arguments.
**	**
** ^The first argument to the busy handler is a copy of the void* pointer which	** ^The first argument to the busy handler is a copy of the void* pointer which
** is the third argument to sqlite3_busy_handler(). ^The second argument to	** is the third argument to sqlite3_busy_handler(). ^The second argument to
** the busy handler callback is the number of times that the busy handler has	** the busy handler callback is the number of times that the busy handler has
** been invoked for this locking event. ^If the	** been invoked previously for the same locking event. ^If the
** busy callback returns 0, then no additional attempts are made to	** busy callback returns 0, then no additional attempts are made to
** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned.	** access the database and [SQLITE_BUSY] is returned
	** to the application.
** ^If the callback returns non-zero, then another attempt	** ^If the callback returns non-zero, then another attempt
** is made to open the database for reading and the cycle repeats.	** is made to access the database and the cycle repeats.
**	**
** The presence of a busy handler does not guarantee that it will be invoked	** The presence of a busy handler does not guarantee that it will be invoked
** when there is lock contention. ^If SQLite determines that invoking the busy	** when there is lock contention. ^If SQLite determines that invoking the busy
** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]	** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler.	** to the application instead of invoking the
	** busy handler.
** Consider a scenario where one process is holding a read lock that	** Consider a scenario where one process is holding a read lock that
** it is trying to promote to a reserved lock and	** it is trying to promote to a reserved lock and
** a second process is holding a reserved lock that it is trying	** a second process is holding a reserved lock that it is trying
Line 1960 SQLITE_API int sqlite3_complete16(const void *sql);	Line 2238 SQLITE_API int sqlite3_complete16(const void *sql);
**	**
** ^The default busy callback is NULL.	** ^The default busy callback is NULL.
**	**
** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
** when SQLite is in the middle of a large transaction where all the
** changes will not fit into the in-memory cache. SQLite will
** already hold a RESERVED lock on the database file, but it needs
** to promote this lock to EXCLUSIVE so that it can spill cache
** pages into the database file without harm to concurrent
** readers. ^If it is unable to promote the lock, then the in-memory
** cache will be left in an inconsistent state and so the error
** code is promoted from the relatively benign [SQLITE_BUSY] to
** the more severe [SQLITE_IOERR_BLOCKED]. ^This error code promotion
** forces an automatic rollback of the changes. See the
** <a href="/cvstrac/wiki?p=CorruptionFollowingBusyError">
** CorruptionFollowingBusyError</a> wiki page for a discussion of why
** this is important.
**
** ^(There can only be a single busy handler defined for each	** ^(There can only be a single busy handler defined for each
** [database connection]. Setting a new busy handler clears any	** [database connection]. Setting a new busy handler clears any
** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()]	** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()]
** will also set or clear the busy handler.	** or evaluating [PRAGMA busy_timeout=N] will change the
	** busy handler and thus clear any previously set busy handler.
**	**
** The busy callback should not take any actions which modify the	** The busy callback should not take any actions which modify the
** database connection that invoked the busy handler. Any such actions	** database connection that invoked the busy handler. In other words,
	** the busy handler is not reentrant. Any such actions
** result in undefined behavior.	** result in undefined behavior.
**	**
** A busy handler must not close the database connection	** A busy handler must not close the database connection
** or [prepared statement] that invoked the busy handler.	** or [prepared statement] that invoked the busy handler.
*/	*/
SQLITE_API int sqlite3_busy_handler(sqlite3, int()(void,int), void);	SQLITE_API int sqlite3_busy_handler(sqlite3,int()(void,int),void);

/*	/*
** CAPI3REF: Set A Busy Timeout	** CAPI3REF: Set A Busy Timeout
	** METHOD: sqlite3
**	**
** ^This routine sets a [sqlite3_busy_handler \| busy handler] that sleeps	** ^This routine sets a [sqlite3_busy_handler \| busy handler] that sleeps
** for a specified amount of time when a table is locked. ^The handler	** for a specified amount of time when a table is locked. ^The handler
** will sleep multiple times until at least "ms" milliseconds of sleeping	** will sleep multiple times until at least "ms" milliseconds of sleeping
** have accumulated. ^After at least "ms" milliseconds of sleeping,	** have accumulated. ^After at least "ms" milliseconds of sleeping,
** the handler returns 0 which causes [sqlite3_step()] to return	** the handler returns 0 which causes [sqlite3_step()] to return
** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].	** [SQLITE_BUSY].
**	**
** ^Calling this routine with an argument less than or equal to zero	** ^Calling this routine with an argument less than or equal to zero
** turns off all busy handlers.	** turns off all busy handlers.
**	**
** ^(There can only be a single busy handler for a particular	** ^(There can only be a single busy handler for a particular
** [database connection] any any given moment. If another busy handler	** [database connection] at any given moment. If another busy handler
** was defined (using [sqlite3_busy_handler()]) prior to calling	** was defined (using [sqlite3_busy_handler()]) prior to calling
** this routine, that other busy handler is cleared.)^	** this routine, that other busy handler is cleared.)^
	**
	** See also: [PRAGMA busy_timeout]
*/	*/
SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);	SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);

/*	/*
** CAPI3REF: Convenience Routines For Running Queries	** CAPI3REF: Convenience Routines For Running Queries
	** METHOD: sqlite3
**	**
** This is a legacy interface that is preserved for backwards compatibility.	** This is a legacy interface that is preserved for backwards compatibility.
** Use of this interface is not recommended.	** Use of this interface is not recommended.
Line 2096 SQLITE_API void sqlite3_free_table(char **result);	Line 2365 SQLITE_API void sqlite3_free_table(char **result);
**	**
** These routines are work-alikes of the "printf()" family of functions	** These routines are work-alikes of the "printf()" family of functions
** from the standard C library.	** from the standard C library.
	** These routines understand most of the common K&R formatting options,
	** plus some additional non-standard formats, detailed below.
	** Note that some of the more obscure formatting options from recent
	** C-library standards are omitted from this implementation.
**	**
** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their	** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
** results into memory obtained from [sqlite3_malloc()].	** results into memory obtained from [sqlite3_malloc()].
Line 2128 SQLITE_API void sqlite3_free_table(char **result);	Line 2401 SQLITE_API void sqlite3_free_table(char **result);
** These routines all implement some additional formatting	** These routines all implement some additional formatting
** options that are useful for constructing SQL statements.	** options that are useful for constructing SQL statements.
** All of the usual printf() formatting options apply. In addition, there	** All of the usual printf() formatting options apply. In addition, there
** is are "%q", "%Q", and "%z" options.	** is are "%q", "%Q", "%w" and "%z" options.
**	**
** ^(The %q option works like %s in that it substitutes a nul-terminated	** ^(The %q option works like %s in that it substitutes a nul-terminated
** string from the argument list. But %q also doubles every '\'' character.	** string from the argument list. But %q also doubles every '\'' character.
Line 2181 SQLITE_API void sqlite3_free_table(char **result);	Line 2454 SQLITE_API void sqlite3_free_table(char **result);
** The code above will render a correct SQL statement in the zSQL	** The code above will render a correct SQL statement in the zSQL
** variable even if the zText variable is a NULL pointer.	** variable even if the zText variable is a NULL pointer.
**	**
	** ^(The "%w" formatting option is like "%q" except that it expects to
	** be contained within double-quotes instead of single quotes, and it
	** escapes the double-quote character instead of the single-quote
	** character.)^ The "%w" formatting option is intended for safely inserting
	** table and column names into a constructed SQL statement.
	**
** ^(The "%z" formatting option works like "%s" but with the	** ^(The "%z" formatting option works like "%s" but with the
** addition that after the string has been read and copied into	** addition that after the string has been read and copied into
** the result, [sqlite3_free()] is called on the input string.)^	** the result, [sqlite3_free()] is called on the input string.)^
Line 2205 SQLITE_API char sqlite3_vsnprintf(int,char,const cha	Line 2484 SQLITE_API char sqlite3_vsnprintf(int,char,const cha
** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns	** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns
** a NULL pointer.	** a NULL pointer.
**	**
	** ^The sqlite3_malloc64(N) routine works just like
	** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead
	** of a signed 32-bit integer.
	**
** ^Calling sqlite3_free() with a pointer previously returned	** ^Calling sqlite3_free() with a pointer previously returned
** by sqlite3_malloc() or sqlite3_realloc() releases that memory so	** by sqlite3_malloc() or sqlite3_realloc() releases that memory so
** that it might be reused. ^The sqlite3_free() routine is	** that it might be reused. ^The sqlite3_free() routine is
Line 2216 SQLITE_API char sqlite3_vsnprintf(int,char,const cha	Line 2499 SQLITE_API char sqlite3_vsnprintf(int,char,const cha
** might result if sqlite3_free() is called with a non-NULL pointer that	** might result if sqlite3_free() is called with a non-NULL pointer that
** was not obtained from sqlite3_malloc() or sqlite3_realloc().	** was not obtained from sqlite3_malloc() or sqlite3_realloc().
**	**
** ^(The sqlite3_realloc() interface attempts to resize a	** ^The sqlite3_realloc(X,N) interface attempts to resize a
** prior memory allocation to be at least N bytes, where N is the	** prior memory allocation X to be at least N bytes.
** second parameter. The memory allocation to be resized is the first	** ^If the X parameter to sqlite3_realloc(X,N)
** parameter.)^ ^ If the first parameter to sqlite3_realloc()
** is a NULL pointer then its behavior is identical to calling	** is a NULL pointer then its behavior is identical to calling
** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc().	** sqlite3_malloc(N).
** ^If the second parameter to sqlite3_realloc() is zero or	** ^If the N parameter to sqlite3_realloc(X,N) is zero or
** negative then the behavior is exactly the same as calling	** negative then the behavior is exactly the same as calling
** sqlite3_free(P) where P is the first parameter to sqlite3_realloc().	** sqlite3_free(X).
** ^sqlite3_realloc() returns a pointer to a memory allocation	** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation
** of at least N bytes in size or NULL if sufficient memory is unavailable.	** of at least N bytes in size or NULL if insufficient memory is available.
** ^If M is the size of the prior allocation, then min(N,M) bytes	** ^If M is the size of the prior allocation, then min(N,M) bytes
** of the prior allocation are copied into the beginning of buffer returned	** of the prior allocation are copied into the beginning of buffer returned
** by sqlite3_realloc() and the prior allocation is freed.	** by sqlite3_realloc(X,N) and the prior allocation is freed.
** ^If sqlite3_realloc() returns NULL, then the prior allocation	** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the
** is not freed.	** prior allocation is not freed.
**	**
** ^The memory returned by sqlite3_malloc() and sqlite3_realloc()	** ^The sqlite3_realloc64(X,N) interfaces works the same as
	** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead
	** of a 32-bit signed integer.
	**
	** ^If X is a memory allocation previously obtained from sqlite3_malloc(),
	** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then
	** sqlite3_msize(X) returns the size of that memory allocation in bytes.
	** ^The value returned by sqlite3_msize(X) might be larger than the number
	** of bytes requested when X was allocated. ^If X is a NULL pointer then
	** sqlite3_msize(X) returns zero. If X points to something that is not
	** the beginning of memory allocation, or if it points to a formerly
	** valid memory allocation that has now been freed, then the behavior
	** of sqlite3_msize(X) is undefined and possibly harmful.
	**
	** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(),
	** sqlite3_malloc64(), and sqlite3_realloc64()
** is always aligned to at least an 8 byte boundary, or to a	** is always aligned to at least an 8 byte boundary, or to a
** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time	** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time
** option is used.	** option is used.
Line 2261 SQLITE_API char sqlite3_vsnprintf(int,char,const cha	Line 2558 SQLITE_API char sqlite3_vsnprintf(int,char,const cha
** [sqlite3_free()] or [sqlite3_realloc()].	** [sqlite3_free()] or [sqlite3_realloc()].
*/	*/
SQLITE_API void *sqlite3_malloc(int);	SQLITE_API void *sqlite3_malloc(int);
	SQLITE_API void *sqlite3_malloc64(sqlite3_uint64);
SQLITE_API void sqlite3_realloc(void, int);	SQLITE_API void sqlite3_realloc(void, int);
	SQLITE_API void sqlite3_realloc64(void, sqlite3_uint64);
SQLITE_API void sqlite3_free(void*);	SQLITE_API void sqlite3_free(void*);
	SQLITE_API sqlite3_uint64 sqlite3_msize(void*);

/*	/*
** CAPI3REF: Memory Allocator Statistics	** CAPI3REF: Memory Allocator Statistics
Line 2300 SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int	Line 2600 SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int
** applications to access the same PRNG for other purposes.	** applications to access the same PRNG for other purposes.
**	**
** ^A call to this routine stores N bytes of randomness into buffer P.	** ^A call to this routine stores N bytes of randomness into buffer P.
	** ^The P parameter can be a NULL pointer.
**	**
** ^The first time this routine is invoked (either internally or by	** ^If this routine has not been previously called or if the previous
** the application) the PRNG is seeded using randomness obtained	** call had N less than one or a NULL pointer for P, then the PRNG is
** from the xRandomness method of the default [sqlite3_vfs] object.	** seeded using randomness obtained from the xRandomness method of
** ^On all subsequent invocations, the pseudo-randomness is generated	** the default [sqlite3_vfs] object.
	** ^If the previous call to this routine had an N of 1 or more and a
	** non-NULL P then the pseudo-randomness is generated
** internally and without recourse to the [sqlite3_vfs] xRandomness	** internally and without recourse to the [sqlite3_vfs] xRandomness
** method.	** method.
*/	*/
Line 2312 SQLITE_API void sqlite3_randomness(int N, void *P);	Line 2615 SQLITE_API void sqlite3_randomness(int N, void *P);

/*	/*
** CAPI3REF: Compile-Time Authorization Callbacks	** CAPI3REF: Compile-Time Authorization Callbacks
	** METHOD: sqlite3
**	**
** ^This routine registers an authorizer callback with a particular	** ^This routine registers an authorizer callback with a particular
** [database connection], supplied in the first argument.	** [database connection], supplied in the first argument.
Line 2405 SQLITE_API int sqlite3_set_authorizer(	Line 2709 SQLITE_API int sqlite3_set_authorizer(
** [sqlite3_set_authorizer \| authorizer documentation] for additional	** [sqlite3_set_authorizer \| authorizer documentation] for additional
** information.	** information.
**	**
** Note that SQLITE_IGNORE is also used as a [SQLITE_ROLLBACK \| return code]	** Note that SQLITE_IGNORE is also used as a [conflict resolution mode]
** from the [sqlite3_vtab_on_conflict()] interface.	** returned from the [sqlite3_vtab_on_conflict()] interface.
*/	*/
#define SQLITE_DENY 1 /* Abort the SQL statement with an error */	#define SQLITE_DENY 1 /* Abort the SQL statement with an error */
#define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */	#define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */
Line 2464 SQLITE_API int sqlite3_set_authorizer(	Line 2768 SQLITE_API int sqlite3_set_authorizer(
#define SQLITE_FUNCTION 31 /* NULL Function Name */	#define SQLITE_FUNCTION 31 /* NULL Function Name */
#define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */	#define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */
#define SQLITE_COPY 0 /* No longer used */	#define SQLITE_COPY 0 /* No longer used */
	#define SQLITE_RECURSIVE 33 /* NULL NULL */

/*	/*
** CAPI3REF: Tracing And Profiling Functions	** CAPI3REF: Tracing And Profiling Functions
	** METHOD: sqlite3
**	**
	** These routines are deprecated. Use the [sqlite3_trace_v2()] interface
	** instead of the routines described here.
	**
** These routines register callback functions that can be used for	** These routines register callback functions that can be used for
** tracing and profiling the execution of SQL statements.	** tracing and profiling the execution of SQL statements.
**	**
Line 2479 SQLITE_API int sqlite3_set_authorizer(	Line 2788 SQLITE_API int sqlite3_set_authorizer(
** as each triggered subprogram is entered. The callbacks for triggers	** as each triggered subprogram is entered. The callbacks for triggers
** contain a UTF-8 SQL comment that identifies the trigger.)^	** contain a UTF-8 SQL comment that identifies the trigger.)^
**	**
	** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit
	** the length of [bound parameter] expansion in the output of sqlite3_trace().
	**
** ^The callback function registered by sqlite3_profile() is invoked	** ^The callback function registered by sqlite3_profile() is invoked
** as each SQL statement finishes. ^The profile callback contains	** as each SQL statement finishes. ^The profile callback contains
** the original statement text and an estimate of wall-clock time	** the original statement text and an estimate of wall-clock time
Line 2490 SQLITE_API int sqlite3_set_authorizer(	Line 2802 SQLITE_API int sqlite3_set_authorizer(
** sqlite3_profile() function is considered experimental and is	** sqlite3_profile() function is considered experimental and is
** subject to change in future versions of SQLite.	** subject to change in future versions of SQLite.
*/	*/
SQLITE_API void sqlite3_trace(sqlite3, void(xTrace)(void,const char), void);	SQLITE_API SQLITE_DEPRECATED void sqlite3_trace(sqlite3,
SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_profile(sqlite3,	void(xTrace)(void,const char), void);
	SQLITE_API SQLITE_DEPRECATED void sqlite3_profile(sqlite3,
void(xProfile)(void,const char,sqlite3_uint64), void);	void(xProfile)(void,const char,sqlite3_uint64), void);

/*	/*
	** CAPI3REF: SQL Trace Event Codes
	** KEYWORDS: SQLITE_TRACE
	**
	** These constants identify classes of events that can be monitored
	** using the [sqlite3_trace_v2()] tracing logic. The third argument
	** to [sqlite3_trace_v2()] is an OR-ed combination of one or more of
	** the following constants. ^The first argument to the trace callback
	** is one of the following constants.
	**
	** New tracing constants may be added in future releases.
	**
	** ^A trace callback has four arguments: xCallback(T,C,P,X).
	** ^The T argument is one of the integer type codes above.
	** ^The C argument is a copy of the context pointer passed in as the
	** fourth argument to [sqlite3_trace_v2()].
	** The P and X arguments are pointers whose meanings depend on T.
	**
	** <dl>
	** [[SQLITE_TRACE_STMT]] <dt>SQLITE_TRACE_STMT</dt>
	** <dd>^An SQLITE_TRACE_STMT callback is invoked when a prepared statement
	** first begins running and possibly at other times during the
	** execution of the prepared statement, such as at the start of each
	** trigger subprogram. ^The P argument is a pointer to the
	** [prepared statement]. ^The X argument is a pointer to a string which
	** is the unexpanded SQL text of the prepared statement or an SQL comment
	** that indicates the invocation of a trigger. ^The callback can compute
	** the same text that would have been returned by the legacy [sqlite3_trace()]
	** interface by using the X argument when X begins with "--" and invoking
	** [sqlite3_expanded_sql(P)] otherwise.
	**
	** [[SQLITE_TRACE_PROFILE]] <dt>SQLITE_TRACE_PROFILE</dt>
	** <dd>^An SQLITE_TRACE_PROFILE callback provides approximately the same
	** information as is provided by the [sqlite3_profile()] callback.
	** ^The P argument is a pointer to the [prepared statement] and the
	** X argument points to a 64-bit integer which is the estimated of
	** the number of nanosecond that the prepared statement took to run.
	** ^The SQLITE_TRACE_PROFILE callback is invoked when the statement finishes.
	**
	** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt>
	** <dd>^An SQLITE_TRACE_ROW callback is invoked whenever a prepared
	** statement generates a single row of result.
	** ^The P argument is a pointer to the [prepared statement] and the
	** X argument is unused.
	**
	** [[SQLITE_TRACE_CLOSE]] <dt>SQLITE_TRACE_CLOSE</dt>
	** <dd>^An SQLITE_TRACE_CLOSE callback is invoked when a database
	** connection closes.
	** ^The P argument is a pointer to the [database connection] object
	** and the X argument is unused.
	** </dl>
	*/
	#define SQLITE_TRACE_STMT 0x01
	#define SQLITE_TRACE_PROFILE 0x02
	#define SQLITE_TRACE_ROW 0x04
	#define SQLITE_TRACE_CLOSE 0x08

	/*
	** CAPI3REF: SQL Trace Hook
	** METHOD: sqlite3
	**
	** ^The sqlite3_trace_v2(D,M,X,P) interface registers a trace callback
	** function X against [database connection] D, using property mask M
	** and context pointer P. ^If the X callback is
	** NULL or if the M mask is zero, then tracing is disabled. The
	** M argument should be the bitwise OR-ed combination of
	** zero or more [SQLITE_TRACE] constants.
	**
	** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides
	** (cancels) any prior calls to sqlite3_trace() or sqlite3_trace_v2().
	**
	** ^The X callback is invoked whenever any of the events identified by
	** mask M occur. ^The integer return value from the callback is currently
	** ignored, though this may change in future releases. Callback
	** implementations should return zero to ensure future compatibility.
	**
	** ^A trace callback is invoked with four arguments: callback(T,C,P,X).
	** ^The T argument is one of the [SQLITE_TRACE]
	** constants to indicate why the callback was invoked.
	** ^The C argument is a copy of the context pointer.
	** The P and X arguments are pointers whose meanings depend on T.
	**
	** The sqlite3_trace_v2() interface is intended to replace the legacy
	** interfaces [sqlite3_trace()] and [sqlite3_profile()], both of which
	** are deprecated.
	*/
	SQLITE_API int sqlite3_trace_v2(
	sqlite3*,
	unsigned uMask,
	int(xCallback)(unsigned,void,void,void),
	void *pCtx
	);

	/*
** CAPI3REF: Query Progress Callbacks	** CAPI3REF: Query Progress Callbacks
	** METHOD: sqlite3
**	**
** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback	** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback
** function X to be invoked periodically during long running calls to	** function X to be invoked periodically during long running calls to
Line 2504 SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(s	Line 2911 SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(s
** interface is to keep a GUI updated during a large query.	** interface is to keep a GUI updated during a large query.
**	**
** ^The parameter P is passed through as the only parameter to the	** ^The parameter P is passed through as the only parameter to the
** callback function X. ^The parameter N is the number of	** callback function X. ^The parameter N is the approximate number of
** [virtual machine instructions] that are evaluated between successive	** [virtual machine instructions] that are evaluated between successive
** invocations of the callback X.	** invocations of the callback X. ^If N is less than one then the progress
	** handler is disabled.
**	**
** ^Only a single progress handler may be defined at one time per	** ^Only a single progress handler may be defined at one time per
** [database connection]; setting a new progress handler cancels the	** [database connection]; setting a new progress handler cancels the
Line 2528 SQLITE_API void sqlite3_progress_handler(sqlite3*, int	Line 2936 SQLITE_API void sqlite3_progress_handler(sqlite3*, int

/*	/*
** CAPI3REF: Opening A New Database Connection	** CAPI3REF: Opening A New Database Connection
	** CONSTRUCTOR: sqlite3
**	**
** ^These routines open an SQLite database file as specified by the	** ^These routines open an SQLite database file as specified by the
** filename argument. ^The filename argument is interpreted as UTF-8 for	** filename argument. ^The filename argument is interpreted as UTF-8 for
Line 2542 SQLITE_API void sqlite3_progress_handler(sqlite3*, int	Line 2951 SQLITE_API void sqlite3_progress_handler(sqlite3*, int
** an English language description of the error following a failure of any	** an English language description of the error following a failure of any
** of the sqlite3_open() routines.	** of the sqlite3_open() routines.
**	**
** ^The default encoding for the database will be UTF-8 if	** ^The default encoding will be UTF-8 for databases created using
** sqlite3_open() or sqlite3_open_v2() is called and	** sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases
** UTF-16 in the native byte order if sqlite3_open16() is used.	** created using sqlite3_open16() will be UTF-16 in the native byte order.
**	**
** Whether or not an error occurs when it is opened, resources	** Whether or not an error occurs when it is opened, resources
** associated with the [database connection] handle should be released by	** associated with the [database connection] handle should be released by
Line 2632 SQLITE_API void sqlite3_progress_handler(sqlite3*, int	Line 3041 SQLITE_API void sqlite3_progress_handler(sqlite3*, int
** then it is interpreted as an absolute path. ^If the path does not begin	** then it is interpreted as an absolute path. ^If the path does not begin
** with a '/' (meaning that the authority section is omitted from the URI)	** with a '/' (meaning that the authority section is omitted from the URI)
** then the path is interpreted as a relative path.	** then the path is interpreted as a relative path.
** ^On windows, the first component of an absolute path	** ^(On windows, the first component of an absolute path
** is a drive specification (e.g. "C:").	** is a drive specification (e.g. "C:").)^
**	**
** [[core URI query parameters]]	** [[core URI query parameters]]
** The query component of a URI may contain parameters that are interpreted	** The query component of a URI may contain parameters that are interpreted
** either by SQLite itself, or by a [VFS \| custom VFS implementation].	** either by SQLite itself, or by a [VFS \| custom VFS implementation].
** SQLite interprets the following three query parameters:	** SQLite and its built-in [VFSes] interpret the
	** following query parameters:
**	**
** <ul>	** <ul>
** <li> <b>vfs</b>: ^The "vfs" parameter may be used to specify the name of	** <li> <b>vfs</b>: ^The "vfs" parameter may be used to specify the name of
Line 2670 SQLITE_API void sqlite3_progress_handler(sqlite3*, int	Line 3080 SQLITE_API void sqlite3_progress_handler(sqlite3*, int
** sqlite3_open_v2(). ^Setting the cache parameter to "private" is	** sqlite3_open_v2(). ^Setting the cache parameter to "private" is
** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit.	** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit.
** ^If sqlite3_open_v2() is used and the "cache" parameter is present in	** ^If sqlite3_open_v2() is used and the "cache" parameter is present in
** a URI filename, its value overrides any behaviour requested by setting	** a URI filename, its value overrides any behavior requested by setting
** SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.	** SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.
	**
	** <li> <b>psow</b>: ^The psow parameter indicates whether or not the
	** [powersafe overwrite] property does or does not apply to the
	** storage media on which the database file resides.
	**
	** <li> <b>nolock</b>: ^The nolock parameter is a boolean query parameter
	** which if set disables file locking in rollback journal modes. This
	** is useful for accessing a database on a filesystem that does not
	** support locking. Caution: Database corruption might result if two
	** or more processes write to the same database and any one of those
	** processes uses nolock=1.
	**
	** <li> <b>immutable</b>: ^The immutable parameter is a boolean query
	** parameter that indicates that the database file is stored on
	** read-only media. ^When immutable is set, SQLite assumes that the
	** database file cannot be changed, even by a process with higher
	** privilege, and so the database is opened read-only and all locking
	** and change detection is disabled. Caution: Setting the immutable
	** property on a database file that does in fact change can result
	** in incorrect query results and/or [SQLITE_CORRUPT] errors.
	** See also: [SQLITE_IOCAP_IMMUTABLE].
	**
** </ul>	** </ul>
**	**
** ^Specifying an unknown parameter in the query component of a URI is not an	** ^Specifying an unknown parameter in the query component of a URI is not an
Line 2701 SQLITE_API void sqlite3_progress_handler(sqlite3*, int	Line 3133 SQLITE_API void sqlite3_progress_handler(sqlite3*, int
** Open file "data.db" in the current directory for read-only access.	** Open file "data.db" in the current directory for read-only access.
** Regardless of whether or not shared-cache mode is enabled by	** Regardless of whether or not shared-cache mode is enabled by
** default, use a private cache.	** default, use a private cache.
** <tr><td> file:/home/fred/data.db?vfs=unix-nolock <td>	** <tr><td> file:/home/fred/data.db?vfs=unix-dotfile <td>
** Open file "/home/fred/data.db". Use the special VFS "unix-nolock".	** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile"
	** that uses dot-files in place of posix advisory locking.
** <tr><td> file:data.db?mode=readonly <td>	** <tr><td> file:data.db?mode=readonly <td>
** An error. "readonly" is not a valid option for the "mode" parameter.	** An error. "readonly" is not a valid option for the "mode" parameter.
** </table>	** </table>
Line 2789 SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*	Line 3222 SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*

/*	/*
** CAPI3REF: Error Codes And Messages	** CAPI3REF: Error Codes And Messages
	** METHOD: sqlite3
**	**
** ^The sqlite3_errcode() interface returns the numeric [result code] or	** ^If the most recent sqlite3_* API call associated with
** [extended result code] for the most recent failed sqlite3_* API call	** [database connection] D failed, then the sqlite3_errcode(D) interface
** associated with a [database connection]. If a prior API call failed	** returns the numeric [result code] or [extended result code] for that
** but the most recent API call succeeded, the return value from	** API call.
** sqlite3_errcode() is undefined. ^The sqlite3_extended_errcode()	** If the most recent API call was successful,
	** then the return value from sqlite3_errcode() is undefined.
	** ^The sqlite3_extended_errcode()
** interface is the same except that it always returns the	** interface is the same except that it always returns the
** [extended result code] even when extended result codes are	** [extended result code] even when extended result codes are
** disabled.	** disabled.
Line 2832 SQLITE_API const void sqlite3_errmsg16(sqlite3);	Line 3268 SQLITE_API const void sqlite3_errmsg16(sqlite3);
SQLITE_API const char *sqlite3_errstr(int);	SQLITE_API const char *sqlite3_errstr(int);

/*	/*
** CAPI3REF: SQL Statement Object	** CAPI3REF: Prepared Statement Object
** KEYWORDS: {prepared statement} {prepared statements}	** KEYWORDS: {prepared statement} {prepared statements}
**	**
** An instance of this object represents a single SQL statement.	** An instance of this object represents a single SQL statement that
** This object is variously known as a "prepared statement" or a	** has been compiled into binary form and is ready to be evaluated.
** "compiled SQL statement" or simply as a "statement".
**	**
** The life of a statement object goes something like this:	** Think of each SQL statement as a separate computer program. The
	** original SQL text is source code. A prepared statement object
	** is the compiled object code. All SQL must be converted into a
	** prepared statement before it can be run.
**	**
	** The life-cycle of a prepared statement object usually goes like this:
	**
** <ol>	** <ol>
** <li> Create the object using [sqlite3_prepare_v2()] or a related	** <li> Create the prepared statement object using [sqlite3_prepare_v2()].
** function.	** <li> Bind values to [parameters] using the sqlite3_bind_*()
** <li> Bind values to [host parameters] using the sqlite3_bind_*()
** interfaces.	** interfaces.
** <li> Run the SQL by calling [sqlite3_step()] one or more times.	** <li> Run the SQL by calling [sqlite3_step()] one or more times.
** <li> Reset the statement using [sqlite3_reset()] then go back	** <li> Reset the prepared statement using [sqlite3_reset()] then go back
** to step 2. Do this zero or more times.	** to step 2. Do this zero or more times.
** <li> Destroy the object using [sqlite3_finalize()].	** <li> Destroy the object using [sqlite3_finalize()].
** </ol>	** </ol>
**
** Refer to documentation on individual methods above for additional
** information.
*/	*/
typedef struct sqlite3_stmt sqlite3_stmt;	typedef struct sqlite3_stmt sqlite3_stmt;

/*	/*
** CAPI3REF: Run-time Limits	** CAPI3REF: Run-time Limits
	** METHOD: sqlite3
**	**
** ^(This interface allows the size of various constructs to be limited	** ^(This interface allows the size of various constructs to be limited
** on a connection by connection basis. The first parameter is the	** on a connection by connection basis. The first parameter is the
Line 2948 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new	Line 3385 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new
**	**
** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt>	** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt>
** <dd>The maximum depth of recursion for triggers.</dd>)^	** <dd>The maximum depth of recursion for triggers.</dd>)^
	**
	** [[SQLITE_LIMIT_WORKER_THREADS]] ^(<dt>SQLITE_LIMIT_WORKER_THREADS</dt>
	** <dd>The maximum number of auxiliary worker threads that a single
	** [prepared statement] may start.</dd>)^
** </dl>	** </dl>
*/	*/
#define SQLITE_LIMIT_LENGTH 0	#define SQLITE_LIMIT_LENGTH 0
Line 2961 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new	Line 3402 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new
#define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8	#define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8
#define SQLITE_LIMIT_VARIABLE_NUMBER 9	#define SQLITE_LIMIT_VARIABLE_NUMBER 9
#define SQLITE_LIMIT_TRIGGER_DEPTH 10	#define SQLITE_LIMIT_TRIGGER_DEPTH 10
	#define SQLITE_LIMIT_WORKER_THREADS 11

/*	/*
** CAPI3REF: Compiling An SQL Statement	** CAPI3REF: Compiling An SQL Statement
** KEYWORDS: {SQL statement compiler}	** KEYWORDS: {SQL statement compiler}
	** METHOD: sqlite3
	** CONSTRUCTOR: sqlite3_stmt
**	**
** To execute an SQL query, it must first be compiled into a byte-code	** To execute an SQL query, it must first be compiled into a byte-code
** program using one of these routines.	** program using one of these routines.
Line 2978 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new	Line 3422 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new
** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()	** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
** use UTF-16.	** use UTF-16.
**	**
** ^If the nByte argument is less than zero, then zSql is read up to the	** ^If the nByte argument is negative, then zSql is read up to the
** first zero terminator. ^If nByte is non-negative, then it is the maximum	** first zero terminator. ^If nByte is positive, then it is the
** number of bytes read from zSql. ^When nByte is non-negative, the	** number of bytes read from zSql. ^If nByte is zero, then no prepared
** zSql string ends at either the first '\000' or '\u0000' character or	** statement is generated.
** the nByte-th byte, whichever comes first. If the caller knows	** If the caller knows that the supplied string is nul-terminated, then
** that the supplied string is nul-terminated, then there is a small	** there is a small performance advantage to passing an nByte parameter that
** performance advantage to be gained by passing an nByte parameter that	** is the number of bytes in the input string <i>including</i>
** is equal to the number of bytes in the input string <i>including</i>	** the nul-terminator.
** the nul-terminator bytes as this saves SQLite from having to
** make a copy of the input string.
**	**
** ^If pzTail is not NULL then *pzTail is made to point to the first byte	** ^If pzTail is not NULL then *pzTail is made to point to the first byte
** past the end of the first SQL statement in zSql. These routines only	** past the end of the first SQL statement in zSql. These routines only
Line 3017 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new	Line 3459 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new
** <li>	** <li>
** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it	** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
** always used to do, [sqlite3_step()] will automatically recompile the SQL	** always used to do, [sqlite3_step()] will automatically recompile the SQL
** statement and try to run it again.	** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY]
	** retries will occur before sqlite3_step() gives up and returns an error.
** </li>	** </li>
**	**
** <li>	** <li>
Line 3039 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new	Line 3482 SQLITE_API int sqlite3_limit(sqlite3*, int id, int new
** choice of query plan if the parameter is the left-hand side of a [LIKE]	** choice of query plan if the parameter is the left-hand side of a [LIKE]
** or [GLOB] operator or if the parameter is compared to an indexed column	** or [GLOB] operator or if the parameter is compared to an indexed column
** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.	** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
** the
** </li>	** </li>
** </ol>	** </ol>
*/	*/
Line 3074 SQLITE_API int sqlite3_prepare16_v2(	Line 3516 SQLITE_API int sqlite3_prepare16_v2(

/*	/*
** CAPI3REF: Retrieving Statement SQL	** CAPI3REF: Retrieving Statement SQL
	** METHOD: sqlite3_stmt
**	**
** ^This interface can be used to retrieve a saved copy of the original	** ^The sqlite3_sql(P) interface returns a pointer to a copy of the UTF-8
** SQL text used to create a [prepared statement] if that statement was	** SQL text used to create [prepared statement] P if P was
** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].	** created by either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
	** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8
	** string containing the SQL text of prepared statement P with
	** [bound parameters] expanded.
	**
	** ^(For example, if a prepared statement is created using the SQL
	** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345
	** and parameter :xyz is unbound, then sqlite3_sql() will return
	** the original string, "SELECT $abc,:xyz" but sqlite3_expanded_sql()
	** will return "SELECT 2345,NULL".)^
	**
	** ^The sqlite3_expanded_sql() interface returns NULL if insufficient memory
	** is available to hold the result, or if the result would exceed the
	** the maximum string length determined by the [SQLITE_LIMIT_LENGTH].
	**
	** ^The [SQLITE_TRACE_SIZE_LIMIT] compile-time option limits the size of
	** bound parameter expansions. ^The [SQLITE_OMIT_TRACE] compile-time
	** option causes sqlite3_expanded_sql() to always return NULL.
	**
	** ^The string returned by sqlite3_sql(P) is managed by SQLite and is
	** automatically freed when the prepared statement is finalized.
	** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
	** is obtained from [sqlite3_malloc()] and must be free by the application
	** by passing it to [sqlite3_free()].
*/	*/
SQLITE_API const char sqlite3_sql(sqlite3_stmt pStmt);	SQLITE_API const char sqlite3_sql(sqlite3_stmt pStmt);
	SQLITE_API char sqlite3_expanded_sql(sqlite3_stmt pStmt);

/*	/*
** CAPI3REF: Determine If An SQL Statement Writes The Database	** CAPI3REF: Determine If An SQL Statement Writes The Database
	** METHOD: sqlite3_stmt
**	**
** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if	** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if
** and only if the [prepared statement] X makes no direct changes to	** and only if the [prepared statement] X makes no direct changes to
Line 3114 SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pSt	Line 3582 SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pSt

/*	/*
** CAPI3REF: Determine If A Prepared Statement Has Been Reset	** CAPI3REF: Determine If A Prepared Statement Has Been Reset
	** METHOD: sqlite3_stmt
**	**
** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the	** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
** [prepared statement] S has been stepped at least once using	** [prepared statement] S has been stepped at least once using
** [sqlite3_step(S)] but has not run to completion and/or has not	** [sqlite3_step(S)] but has neither run to completion (returned
	** [SQLITE_DONE] from [sqlite3_step(S)]) nor
** been reset using [sqlite3_reset(S)]. ^The sqlite3_stmt_busy(S)	** been reset using [sqlite3_reset(S)]. ^The sqlite3_stmt_busy(S)
** interface returns false if S is a NULL pointer. If S is not a	** interface returns false if S is a NULL pointer. If S is not a
** NULL pointer and is not a pointer to a valid [prepared statement]	** NULL pointer and is not a pointer to a valid [prepared statement]
Line 3144 SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);	Line 3614 SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
** Some interfaces require a protected sqlite3_value. Other interfaces	** Some interfaces require a protected sqlite3_value. Other interfaces
** will accept either a protected or an unprotected sqlite3_value.	** will accept either a protected or an unprotected sqlite3_value.
** Every interface that accepts sqlite3_value arguments specifies	** Every interface that accepts sqlite3_value arguments specifies
** whether or not it requires a protected sqlite3_value.	** whether or not it requires a protected sqlite3_value. The
	** [sqlite3_value_dup()] interface can be used to construct a new
	** protected sqlite3_value from an unprotected sqlite3_value.
**	**
** The terms "protected" and "unprotected" refer to whether or not	** The terms "protected" and "unprotected" refer to whether or not
** a mutex is held. An internal mutex is held for a protected	** a mutex is held. An internal mutex is held for a protected
Line 3188 typedef struct sqlite3_context sqlite3_context;	Line 3660 typedef struct sqlite3_context sqlite3_context;
** CAPI3REF: Binding Values To Prepared Statements	** CAPI3REF: Binding Values To Prepared Statements
** KEYWORDS: {host parameter} {host parameters} {host parameter name}	** KEYWORDS: {host parameter} {host parameters} {host parameter name}
** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding}	** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding}
	** METHOD: sqlite3_stmt
**	**
** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants,	** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants,
** literals may be replaced by a [parameter] that matches one of following	** literals may be replaced by a [parameter] that matches one of following
Line 3221 typedef struct sqlite3_context sqlite3_context;	Line 3694 typedef struct sqlite3_context sqlite3_context;
** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999).	** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999).
**	**
** ^The third argument is the value to bind to the parameter.	** ^The third argument is the value to bind to the parameter.
	** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16()
	** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter
	** is ignored and the end result is the same as sqlite3_bind_null().
**	**
** ^(In those routines that have a fourth argument, its value is the	** ^(In those routines that have a fourth argument, its value is the
** number of bytes in the parameter. To be clear: the value is the	** number of bytes in the parameter. To be clear: the value is the
Line 3231 typedef struct sqlite3_context sqlite3_context;	Line 3707 typedef struct sqlite3_context sqlite3_context;
** If the fourth parameter to sqlite3_bind_blob() is negative, then	** If the fourth parameter to sqlite3_bind_blob() is negative, then
** the behavior is undefined.	** the behavior is undefined.
** If a non-negative fourth parameter is provided to sqlite3_bind_text()	** If a non-negative fourth parameter is provided to sqlite3_bind_text()
** or sqlite3_bind_text16() then that parameter must be the byte offset	** or sqlite3_bind_text16() or sqlite3_bind_text64() then
	** that parameter must be the byte offset
** where the NUL terminator would occur assuming the string were NUL	** where the NUL terminator would occur assuming the string were NUL
** terminated. If any NUL characters occur at byte offsets less than	** terminated. If any NUL characters occur at byte offsets less than
** the value of the fourth parameter then the resulting string value will	** the value of the fourth parameter then the resulting string value will
** contain embedded NULs. The result of expressions involving strings	** contain embedded NULs. The result of expressions involving strings
** with embedded NULs is undefined.	** with embedded NULs is undefined.
**	**
** ^The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and	** ^The fifth argument to the BLOB and string binding interfaces
** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or	** is a destructor used to dispose of the BLOB or
** string after SQLite has finished with it. ^The destructor is called	** string after SQLite has finished with it. ^The destructor is called
** to dispose of the BLOB or string even if the call to sqlite3_bind_blob(),	** to dispose of the BLOB or string even if the call to bind API fails.
** sqlite3_bind_text(), or sqlite3_bind_text16() fails.
** ^If the fifth argument is	** ^If the fifth argument is
** the special value [SQLITE_STATIC], then SQLite assumes that the	** the special value [SQLITE_STATIC], then SQLite assumes that the
** information is in static, unmanaged space and does not need to be freed.	** information is in static, unmanaged space and does not need to be freed.
Line 3250 typedef struct sqlite3_context sqlite3_context;	Line 3726 typedef struct sqlite3_context sqlite3_context;
** SQLite makes its own private copy of the data immediately, before	** SQLite makes its own private copy of the data immediately, before
** the sqlite3_bind_*() routine returns.	** the sqlite3_bind_*() routine returns.
**	**
	** ^The sixth argument to sqlite3_bind_text64() must be one of
	** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]
	** to specify the encoding of the text in the third parameter. If
	** the sixth argument to sqlite3_bind_text64() is not one of the
	** allowed values shown above, or if the text encoding is different
	** from the encoding specified by the sixth parameter, then the behavior
	** is undefined.
	**
** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that	** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
** is filled with zeroes. ^A zeroblob uses a fixed amount of memory	** is filled with zeroes. ^A zeroblob uses a fixed amount of memory
** (just an integer to hold its size) while it is being processed.	** (just an integer to hold its size) while it is being processed.
Line 3270 typedef struct sqlite3_context sqlite3_context;	Line 3754 typedef struct sqlite3_context sqlite3_context;
**	**
** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an	** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an
** [error code] if anything goes wrong.	** [error code] if anything goes wrong.
	** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB
	** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or
	** [SQLITE_MAX_LENGTH].
** ^[SQLITE_RANGE] is returned if the parameter	** ^[SQLITE_RANGE] is returned if the parameter
** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails.	** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails.
**	**
Line 3277 typedef struct sqlite3_context sqlite3_context;	Line 3764 typedef struct sqlite3_context sqlite3_context;
** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].	** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
*/	*/
SQLITE_API int sqlite3_bind_blob(sqlite3_stmt, int, const void, int n, void()(void));	SQLITE_API int sqlite3_bind_blob(sqlite3_stmt, int, const void, int n, void()(void));
	SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt, int, const void, sqlite3_uint64,
	void()(void));
SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);	SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);	SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);	SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);	SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
SQLITE_API int sqlite3_bind_text(sqlite3_stmt, int, const char, int n, void()(void));	SQLITE_API int sqlite3_bind_text(sqlite3_stmt,int,const char,int,void()(void));
SQLITE_API int sqlite3_bind_text16(sqlite3_stmt, int, const void, int, void()(void));	SQLITE_API int sqlite3_bind_text16(sqlite3_stmt, int, const void, int, void()(void));
	SQLITE_API int sqlite3_bind_text64(sqlite3_stmt, int, const char, sqlite3_uint64,
	void()(void), unsigned char encoding);
SQLITE_API int sqlite3_bind_value(sqlite3_stmt, int, const sqlite3_value);	SQLITE_API int sqlite3_bind_value(sqlite3_stmt, int, const sqlite3_value);
SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);	SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
	SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);

/*	/*
** CAPI3REF: Number Of SQL Parameters	** CAPI3REF: Number Of SQL Parameters
	** METHOD: sqlite3_stmt
**	**
** ^This routine can be used to find the number of [SQL parameters]	** ^This routine can be used to find the number of [SQL parameters]
** in a [prepared statement]. SQL parameters are tokens of the	** in a [prepared statement]. SQL parameters are tokens of the
Line 3308 SQLITE_API int sqlite3_bind_parameter_count(sqlite3_st	Line 3801 SQLITE_API int sqlite3_bind_parameter_count(sqlite3_st

/*	/*
** CAPI3REF: Name Of A Host Parameter	** CAPI3REF: Name Of A Host Parameter
	** METHOD: sqlite3_stmt
**	**
** ^The sqlite3_bind_parameter_name(P,N) interface returns	** ^The sqlite3_bind_parameter_name(P,N) interface returns
** the name of the N-th [SQL parameter] in the [prepared statement] P.	** the name of the N-th [SQL parameter] in the [prepared statement] P.
Line 3335 SQLITE_API const char *sqlite3_bind_parameter_name(sql	Line 3829 SQLITE_API const char *sqlite3_bind_parameter_name(sql

/*	/*
** CAPI3REF: Index Of A Parameter With A Given Name	** CAPI3REF: Index Of A Parameter With A Given Name
	** METHOD: sqlite3_stmt
**	**
** ^Return the index of an SQL parameter given its name. ^The	** ^Return the index of an SQL parameter given its name. ^The
** index value returned is suitable for use as the second	** index value returned is suitable for use as the second
Line 3345 SQLITE_API const char *sqlite3_bind_parameter_name(sql	Line 3840 SQLITE_API const char *sqlite3_bind_parameter_name(sql
**	**
** See also: [sqlite3_bind_blob\|sqlite3_bind()],	** See also: [sqlite3_bind_blob\|sqlite3_bind()],
** [sqlite3_bind_parameter_count()], and	** [sqlite3_bind_parameter_count()], and
** [sqlite3_bind_parameter_index()].	** [sqlite3_bind_parameter_name()].
*/	*/
SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt, const char zName);	SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt, const char zName);

/*	/*
** CAPI3REF: Reset All Bindings On A Prepared Statement	** CAPI3REF: Reset All Bindings On A Prepared Statement
	** METHOD: sqlite3_stmt
**	**
** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset	** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset
** the [sqlite3_bind_blob \| bindings] on a [prepared statement].	** the [sqlite3_bind_blob \| bindings] on a [prepared statement].
Line 3360 SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);	Line 3856 SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);

/*	/*
** CAPI3REF: Number Of Columns In A Result Set	** CAPI3REF: Number Of Columns In A Result Set
	** METHOD: sqlite3_stmt
**	**
** ^Return the number of columns in the result set returned by the	** ^Return the number of columns in the result set returned by the
** [prepared statement]. ^This routine returns 0 if pStmt is an SQL	** [prepared statement]. ^This routine returns 0 if pStmt is an SQL
Line 3371 SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStm	Line 3868 SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStm

/*	/*
** CAPI3REF: Column Names In A Result Set	** CAPI3REF: Column Names In A Result Set
	** METHOD: sqlite3_stmt
**	**
** ^These routines return the name assigned to a particular column	** ^These routines return the name assigned to a particular column
** in the result set of a [SELECT] statement. ^The sqlite3_column_name()	** in the result set of a [SELECT] statement. ^The sqlite3_column_name()
Line 3400 SQLITE_API const void *sqlite3_column_name16(sqlite3_s	Line 3898 SQLITE_API const void *sqlite3_column_name16(sqlite3_s

/*	/*
** CAPI3REF: Source Of Data In A Query Result	** CAPI3REF: Source Of Data In A Query Result
	** METHOD: sqlite3_stmt
**	**
** ^These routines provide a means to determine the database, table, and	** ^These routines provide a means to determine the database, table, and
** table column that is the origin of a particular result column in	** table column that is the origin of a particular result column in
Line 3452 SQLITE_API const void *sqlite3_column_origin_name16(sq	Line 3951 SQLITE_API const void *sqlite3_column_origin_name16(sq

/*	/*
** CAPI3REF: Declared Datatype Of A Query Result	** CAPI3REF: Declared Datatype Of A Query Result
	** METHOD: sqlite3_stmt
**	**
** ^(The first parameter is a [prepared statement].	** ^(The first parameter is a [prepared statement].
** If this statement is a [SELECT] statement and the Nth column of the	** If this statement is a [SELECT] statement and the Nth column of the
Line 3484 SQLITE_API const void *sqlite3_column_decltype16(sqlit	Line 3984 SQLITE_API const void *sqlite3_column_decltype16(sqlit

/*	/*
** CAPI3REF: Evaluate An SQL Statement	** CAPI3REF: Evaluate An SQL Statement
	** METHOD: sqlite3_stmt
**	**
** After a [prepared statement] has been prepared using either	** After a [prepared statement] has been prepared using either
** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy	** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
Line 3563 SQLITE_API int sqlite3_step(sqlite3_stmt*);	Line 4064 SQLITE_API int sqlite3_step(sqlite3_stmt*);

/*	/*
** CAPI3REF: Number of columns in a result set	** CAPI3REF: Number of columns in a result set
	** METHOD: sqlite3_stmt
**	**
** ^The sqlite3_data_count(P) interface returns the number of columns in the	** ^The sqlite3_data_count(P) interface returns the number of columns in the
** current row of the result set of [prepared statement] P.	** current row of the result set of [prepared statement] P.
Line 3616 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)	Line 4118 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)
/*	/*
** CAPI3REF: Result Values From A Query	** CAPI3REF: Result Values From A Query
** KEYWORDS: {column access functions}	** KEYWORDS: {column access functions}
	** METHOD: sqlite3_stmt
**	**
** These routines form the "result set" interface.
**
** ^These routines return information about a single column of the current	** ^These routines return information about a single column of the current
** result row of a query. ^In every case the first argument is a pointer	** result row of a query. ^In every case the first argument is a pointer
** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]	** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]
Line 3678 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)	Line 4179 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)
** even empty strings, are always zero-terminated. ^The return	** even empty strings, are always zero-terminated. ^The return
** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer.	** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer.
**	**
** ^The object returned by [sqlite3_column_value()] is an	** <b>Warning:</b> ^The object returned by [sqlite3_column_value()] is an
** [unprotected sqlite3_value] object. An unprotected sqlite3_value object	** [unprotected sqlite3_value] object. In a multithreaded environment,
** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()].	** an unprotected sqlite3_value object may only be used safely with
	** [sqlite3_bind_value()] and [sqlite3_result_value()].
** If the [unprotected sqlite3_value] object returned by	** If the [unprotected sqlite3_value] object returned by
** [sqlite3_column_value()] is used in any other way, including calls	** [sqlite3_column_value()] is used in any other way, including calls
** to routines like [sqlite3_value_int()], [sqlite3_value_text()],	** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
** or [sqlite3_value_bytes()], then the behavior is undefined.	** or [sqlite3_value_bytes()], the behavior is not threadsafe.
**	**
** These routines attempt to convert the value where appropriate. ^For	** These routines attempt to convert the value where appropriate. ^For
** example, if the internal representation is FLOAT and a text result	** example, if the internal representation is FLOAT and a text result
Line 3698 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)	Line 4200 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)
**	**
** <tr><td> NULL <td> INTEGER <td> Result is 0	** <tr><td> NULL <td> INTEGER <td> Result is 0
** <tr><td> NULL <td> FLOAT <td> Result is 0.0	** <tr><td> NULL <td> FLOAT <td> Result is 0.0
** <tr><td> NULL <td> TEXT <td> Result is NULL pointer	** <tr><td> NULL <td> TEXT <td> Result is a NULL pointer
** <tr><td> NULL <td> BLOB <td> Result is NULL pointer	** <tr><td> NULL <td> BLOB <td> Result is a NULL pointer
** <tr><td> INTEGER <td> FLOAT <td> Convert from integer to float	** <tr><td> INTEGER <td> FLOAT <td> Convert from integer to float
** <tr><td> INTEGER <td> TEXT <td> ASCII rendering of the integer	** <tr><td> INTEGER <td> TEXT <td> ASCII rendering of the integer
** <tr><td> INTEGER <td> BLOB <td> Same as INTEGER->TEXT	** <tr><td> INTEGER <td> BLOB <td> Same as INTEGER->TEXT
** <tr><td> FLOAT <td> INTEGER <td> Convert from float to integer	** <tr><td> FLOAT <td> INTEGER <td> [CAST] to INTEGER
** <tr><td> FLOAT <td> TEXT <td> ASCII rendering of the float	** <tr><td> FLOAT <td> TEXT <td> ASCII rendering of the float
** <tr><td> FLOAT <td> BLOB <td> Same as FLOAT->TEXT	** <tr><td> FLOAT <td> BLOB <td> [CAST] to BLOB
** <tr><td> TEXT <td> INTEGER <td> Use atoi()	** <tr><td> TEXT <td> INTEGER <td> [CAST] to INTEGER
** <tr><td> TEXT <td> FLOAT <td> Use atof()	** <tr><td> TEXT <td> FLOAT <td> [CAST] to REAL
** <tr><td> TEXT <td> BLOB <td> No change	** <tr><td> TEXT <td> BLOB <td> No change
** <tr><td> BLOB <td> INTEGER <td> Convert to TEXT then use atoi()	** <tr><td> BLOB <td> INTEGER <td> [CAST] to INTEGER
** <tr><td> BLOB <td> FLOAT <td> Convert to TEXT then use atof()	** <tr><td> BLOB <td> FLOAT <td> [CAST] to REAL
** <tr><td> BLOB <td> TEXT <td> Add a zero terminator if needed	** <tr><td> BLOB <td> TEXT <td> Add a zero terminator if needed
** </table>	** </table>
** </blockquote>)^	** </blockquote>)^
**	**
** The table above makes reference to standard C library functions atoi()
** and atof(). SQLite does not really use these functions. It has its
** own equivalent internal routines. The atoi() and atof() names are
** used in the table for brevity and because they are familiar to most
** C programmers.
**
** Note that when type conversions occur, pointers returned by prior	** Note that when type conversions occur, pointers returned by prior
** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or	** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or
** sqlite3_column_text16() may be invalidated.	** sqlite3_column_text16() may be invalidated.
Line 3745 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)	Line 4241 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)
** of conversion are done in place when it is possible, but sometimes they	** of conversion are done in place when it is possible, but sometimes they
** are not possible and in those cases prior pointers are invalidated.	** are not possible and in those cases prior pointers are invalidated.
**	**
** The safest and easiest to remember policy is to invoke these routines	** The safest policy is to invoke these routines
** in one of the following ways:	** in one of the following ways:
**	**
** <ul>	** <ul>
Line 3765 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)	Line 4261 SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt)
** ^The pointers returned are valid until a type conversion occurs as	** ^The pointers returned are valid until a type conversion occurs as
** described above, or until [sqlite3_step()] or [sqlite3_reset()] or	** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
** [sqlite3_finalize()] is called. ^The memory space used to hold strings	** [sqlite3_finalize()] is called. ^The memory space used to hold strings
** and BLOBs is freed automatically. Do <b>not</b> pass the pointers returned	** and BLOBs is freed automatically. Do <em>not</em> pass the pointers returned
** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into	** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
** [sqlite3_free()].	** [sqlite3_free()].
**	**
** ^(If a memory allocation error occurs during the evaluation of any	** ^(If a memory allocation error occurs during the evaluation of any
Line 3788 SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3	Line 4284 SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3

/*	/*
** CAPI3REF: Destroy A Prepared Statement Object	** CAPI3REF: Destroy A Prepared Statement Object
	** DESTRUCTOR: sqlite3_stmt
**	**
** ^The sqlite3_finalize() function is called to delete a [prepared statement].	** ^The sqlite3_finalize() function is called to delete a [prepared statement].
** ^If the most recent evaluation of the statement encountered no errors	** ^If the most recent evaluation of the statement encountered no errors
Line 3815 SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);	Line 4312 SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);

/*	/*
** CAPI3REF: Reset A Prepared Statement Object	** CAPI3REF: Reset A Prepared Statement Object
	** METHOD: sqlite3_stmt
**	**
** The sqlite3_reset() function is called to reset a [prepared statement]	** The sqlite3_reset() function is called to reset a [prepared statement]
** object back to its initial state, ready to be re-executed.	** object back to its initial state, ready to be re-executed.
Line 3844 SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);	Line 4342 SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
** KEYWORDS: {function creation routines}	** KEYWORDS: {function creation routines}
** KEYWORDS: {application-defined SQL function}	** KEYWORDS: {application-defined SQL function}
** KEYWORDS: {application-defined SQL functions}	** KEYWORDS: {application-defined SQL functions}
	** METHOD: sqlite3
**	**
** ^These functions (collectively known as "function creation routines")	** ^These functions (collectively known as "function creation routines")
** are used to add SQL functions or aggregates or to redefine the behavior	** are used to add SQL functions or aggregates or to redefine the behavior
Line 3875 SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);	Line 4374 SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
**	**
** ^The fourth parameter, eTextRep, specifies what	** ^The fourth parameter, eTextRep, specifies what
** [SQLITE_UTF8 \| text encoding] this SQL function prefers for	** [SQLITE_UTF8 \| text encoding] this SQL function prefers for
** its parameters. Every SQL function implementation must be able to work	** its parameters. The application should set this parameter to
** with UTF-8, UTF-16le, or UTF-16be. But some implementations may be	** [SQLITE_UTF16LE] if the function implementation invokes
** more efficient with one encoding than another. ^An application may	** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the
** invoke sqlite3_create_function() or sqlite3_create_function16() multiple	** implementation invokes [sqlite3_value_text16be()] on an input, or
** times with the same function but with different values of eTextRep.	** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8]
	** otherwise. ^The same SQL function may be registered multiple times using
	** different preferred text encodings, with different implementations for
	** each encoding.
** ^When multiple implementations of the same function are available, SQLite	** ^When multiple implementations of the same function are available, SQLite
** will pick the one that involves the least amount of data conversion.	** will pick the one that involves the least amount of data conversion.
** If there is only a single implementation which does not care what text
** encoding is used, then the fourth argument should be [SQLITE_ANY].
**	**
	** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC]
	** to signal that the function will always return the same result given
	** the same inputs within a single SQL statement. Most SQL functions are
	** deterministic. The built-in [random()] SQL function is an example of a
	** function that is not deterministic. The SQLite query planner is able to
	** perform additional optimizations on deterministic functions, so use
	** of the [SQLITE_DETERMINISTIC] flag is recommended where possible.
	**
** ^(The fifth parameter is an arbitrary pointer. The implementation of the	** ^(The fifth parameter is an arbitrary pointer. The implementation of the
** function can gain access to this pointer using [sqlite3_user_data()].)^	** function can gain access to this pointer using [sqlite3_user_data()].)^
**	**
Line 3965 SQLITE_API int sqlite3_create_function_v2(	Line 4473 SQLITE_API int sqlite3_create_function_v2(
** These constant define integer codes that represent the various	** These constant define integer codes that represent the various
** text encodings supported by SQLite.	** text encodings supported by SQLite.
*/	*/
#define SQLITE_UTF8 1	#define SQLITE_UTF8 1 /* IMP: R-37514-35566 */
#define SQLITE_UTF16LE 2	#define SQLITE_UTF16LE 2 /* IMP: R-03371-37637 */
#define SQLITE_UTF16BE 3	#define SQLITE_UTF16BE 3 /* IMP: R-51971-34154 */
#define SQLITE_UTF16 4 /* Use native byte order */	#define SQLITE_UTF16 4 /* Use native byte order */
#define SQLITE_ANY 5 /* sqlite3_create_function only */	#define SQLITE_ANY 5 /* Deprecated */
#define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */	#define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */

/*	/*
	** CAPI3REF: Function Flags
	**
	** These constants may be ORed together with the
	** [SQLITE_UTF8 \| preferred text encoding] as the fourth argument
	** to [sqlite3_create_function()], [sqlite3_create_function16()], or
	** [sqlite3_create_function_v2()].
	*/
	#define SQLITE_DETERMINISTIC 0x800

	/*
** CAPI3REF: Deprecated Functions	** CAPI3REF: Deprecated Functions
** DEPRECATED	** DEPRECATED
**	**
** These functions are [deprecated]. In order to maintain	** These functions are [deprecated]. In order to maintain
** backwards compatibility with older code, these functions continue	** backwards compatibility with older code, these functions continue
** to be supported. However, new applications should avoid	** to be supported. However, new applications should avoid
** the use of these functions. To help encourage people to avoid	** the use of these functions. To encourage programmers to avoid
** using these functions, we are not going to tell you what they do.	** these functions, we will not explain what they do.
*/	*/
#ifndef SQLITE_OMIT_DEPRECATED	#ifndef SQLITE_OMIT_DEPRECATED
SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);	SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
Line 3988 SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlit	Line 4506 SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlit
SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt, sqlite3_stmt);	SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt, sqlite3_stmt);
SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);	SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);	SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void()(void,sqlite3_int64,int),void*,sqlite3_int64);	SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void()(void,sqlite3_int64,int),
	void*,sqlite3_int64);
#endif	#endif

/*	/*
** CAPI3REF: Obtaining SQL Function Parameter Values	** CAPI3REF: Obtaining SQL Values
	** METHOD: sqlite3_value
**	**
** The C-language implementation of SQL functions and aggregates uses	** The C-language implementation of SQL functions and aggregates uses
** this set of interface routines to access the parameter values on	** this set of interface routines to access the parameter values on
** the function or aggregate.	** the function or aggregate.
**	**
** The xFunc (for scalar functions) or xStep (for aggregates) parameters	** The xFunc (for scalar functions) or xStep (for aggregates) parameters
** to [sqlite3_create_function()] and [sqlite3_create_function16()]	** to [sqlite3_create_function()] and [sqlite3_create_function16()]
Line 4011 SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(	Line 4531 SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(
** object results in undefined behavior.	** object results in undefined behavior.
**	**
** ^These routines work just like the corresponding [column access functions]	** ^These routines work just like the corresponding [column access functions]
** except that these routines take a single [protected sqlite3_value] object	** except that these routines take a single [protected sqlite3_value] object
** pointer instead of a [sqlite3_stmt*] pointer and an integer column number.	** pointer instead of a [sqlite3_stmt*] pointer and an integer column number.
**	**
** ^The sqlite3_value_text16() interface extracts a UTF-16 string	** ^The sqlite3_value_text16() interface extracts a UTF-16 string
Line 4050 SQLITE_API int sqlite3_value_type(sqlite3_value*);	Line 4570 SQLITE_API int sqlite3_value_type(sqlite3_value*);
SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);	SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);

/*	/*
	** CAPI3REF: Finding The Subtype Of SQL Values
	** METHOD: sqlite3_value
	**
	** The sqlite3_value_subtype(V) function returns the subtype for
	** an [application-defined SQL function] argument V. The subtype
	** information can be used to pass a limited amount of context from
	** one SQL function to another. Use the [sqlite3_result_subtype()]
	** routine to set the subtype for the return value of an SQL function.
	**
	** SQLite makes no use of subtype itself. It merely passes the subtype
	** from the result of one [application-defined SQL function] into the
	** input of another.
	*/
	SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value*);

	/*
	** CAPI3REF: Copy And Free SQL Values
	** METHOD: sqlite3_value
	**
	** ^The sqlite3_value_dup(V) interface makes a copy of the [sqlite3_value]
	** object D and returns a pointer to that copy. ^The [sqlite3_value] returned
	** is a [protected sqlite3_value] object even if the input is not.
	** ^The sqlite3_value_dup(V) interface returns NULL if V is NULL or if a
	** memory allocation fails.
	**
	** ^The sqlite3_value_free(V) interface frees an [sqlite3_value] object
	** previously obtained from [sqlite3_value_dup()]. ^If V is a NULL pointer
	** then sqlite3_value_free(V) is a harmless no-op.
	*/
	SQLITE_API sqlite3_value sqlite3_value_dup(const sqlite3_value);
	SQLITE_API void sqlite3_value_free(sqlite3_value*);

	/*
** CAPI3REF: Obtain Aggregate Function Context	** CAPI3REF: Obtain Aggregate Function Context
	** METHOD: sqlite3_context
**	**
** Implementations of aggregate SQL functions use this	** Implementations of aggregate SQL functions use this
** routine to allocate memory for storing their state.	** routine to allocate memory for storing their state.
Line 4068 SQLITE_API int sqlite3_value_numeric_type(sqlite3_valu	Line 4622 SQLITE_API int sqlite3_value_numeric_type(sqlite3_valu
** In those cases, sqlite3_aggregate_context() might be called for the	** In those cases, sqlite3_aggregate_context() might be called for the
** first time from within xFinal().)^	** first time from within xFinal().)^
**	**
** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer if N is	** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer
** less than or equal to zero or if a memory allocate error occurs.	** when first called if N is less than or equal to zero or if a memory
	** allocate error occurs.
**	**
** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is	** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is
** determined by the N parameter on first successful call. Changing the	** determined by the N parameter on first successful call. Changing the
** value of N in subsequent call to sqlite3_aggregate_context() within	** value of N in subsequent call to sqlite3_aggregate_context() within
** the same aggregate function instance will not resize the memory	** the same aggregate function instance will not resize the memory
** allocation.)^	** allocation.)^ Within the xFinal callback, it is customary to set
	** N=0 in calls to sqlite3_aggregate_context(C,N) so that no
	** pointless memory allocations occur.
**	**
** ^SQLite automatically frees the memory allocated by	** ^SQLite automatically frees the memory allocated by
** sqlite3_aggregate_context() when the aggregate query concludes.	** sqlite3_aggregate_context() when the aggregate query concludes.
Line 4092 SQLITE_API void *sqlite3_aggregate_context(sqlite3_con	Line 4649 SQLITE_API void *sqlite3_aggregate_context(sqlite3_con

/*	/*
** CAPI3REF: User Data For Functions	** CAPI3REF: User Data For Functions
	** METHOD: sqlite3_context
**	**
** ^The sqlite3_user_data() interface returns a copy of	** ^The sqlite3_user_data() interface returns a copy of
** the pointer that was the pUserData parameter (the 5th parameter)	** the pointer that was the pUserData parameter (the 5th parameter)
Line 4106 SQLITE_API void sqlite3_user_data(sqlite3_context);	Line 4664 SQLITE_API void sqlite3_user_data(sqlite3_context);

/*	/*
** CAPI3REF: Database Connection For Functions	** CAPI3REF: Database Connection For Functions
	** METHOD: sqlite3_context
**	**
** ^The sqlite3_context_db_handle() interface returns a copy of	** ^The sqlite3_context_db_handle() interface returns a copy of
** the pointer to the [database connection] (the 1st parameter)	** the pointer to the [database connection] (the 1st parameter)
Line 4117 SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_	Line 4676 SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_

/*	/*
** CAPI3REF: Function Auxiliary Data	** CAPI3REF: Function Auxiliary Data
	** METHOD: sqlite3_context
**	**
** The following two functions may be used by scalar SQL functions to	** These functions may be used by (non-aggregate) SQL functions to
** associate metadata with argument values. If the same value is passed to	** associate metadata with argument values. If the same value is passed to
** multiple invocations of the same SQL function during query execution, under	** multiple invocations of the same SQL function during query execution, under
** some circumstances the associated metadata may be preserved. This may	** some circumstances the associated metadata may be preserved. An example
** be used, for example, to add a regular-expression matching scalar	** of where this might be useful is in a regular-expression matching
** function. The compiled version of the regular expression is stored as	** function. The compiled version of the regular expression can be stored as
** metadata associated with the SQL value passed as the regular expression	** metadata associated with the pattern string.
** pattern. The compiled regular expression can be reused on multiple	** Then as long as the pattern string remains the same,
** invocations of the same function so that the original pattern string	** the compiled regular expression can be reused on multiple
** does not need to be recompiled on each invocation.	** invocations of the same function.
**	**
** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata	** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata
** associated by the sqlite3_set_auxdata() function with the Nth argument	** associated by the sqlite3_set_auxdata() function with the Nth argument
** value to the application-defined function. ^If no metadata has been ever	** value to the application-defined function. ^If there is no metadata
** been set for the Nth argument of the function, or if the corresponding	** associated with the function argument, this sqlite3_get_auxdata() interface
** function parameter has changed since the meta-data was set,	** returns a NULL pointer.
** then sqlite3_get_auxdata() returns a NULL pointer.
**	**
** ^The sqlite3_set_auxdata() interface saves the metadata	** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th
** pointed to by its 3rd parameter as the metadata for the N-th	** argument of the application-defined function. ^Subsequent
** argument of the application-defined function. Subsequent	** calls to sqlite3_get_auxdata(C,N) return P from the most recent
** calls to sqlite3_get_auxdata() might return this data, if it has	** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or
** not been destroyed.	** NULL if the metadata has been discarded.
** ^If it is not NULL, SQLite will invoke the destructor	** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL,
** function given by the 4th parameter to sqlite3_set_auxdata() on	** SQLite will invoke the destructor function X with parameter P exactly
** the metadata when the corresponding function parameter changes	** once, when the metadata is discarded.
** or when the SQL statement completes, whichever comes first.	** SQLite is free to discard the metadata at any time, including: <ul>
	** <li> ^(when the corresponding function parameter changes)^, or
	** <li> ^(when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
	** SQL statement)^, or
	** <li> ^(when sqlite3_set_auxdata() is invoked again on the same
	** parameter)^, or
	** <li> ^(during the original sqlite3_set_auxdata() call when a memory
	** allocation error occurs.)^ </ul>
**	**
** SQLite is free to call the destructor and drop metadata on any	** Note the last bullet in particular. The destructor X in
** parameter of any function at any time. ^The only guarantee is that	** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
** the destructor will be called before the metadata is dropped.	** sqlite3_set_auxdata() interface even returns. Hence sqlite3_set_auxdata()
	** should be called near the end of the function implementation and the
	** function implementation should not make any use of P after
	** sqlite3_set_auxdata() has been called.
**	**
** ^(In practice, metadata is preserved between function calls for	** ^(In practice, metadata is preserved between function calls for
** expressions that are constant at compile time. This includes literal	** function parameters that are compile-time constants, including literal
** values and [parameters].)^	** values and [parameters] and expressions composed from the same.)^
**	**
** These routines must be called from the same thread in which	** These routines must be called from the same thread in which
** the SQL function is running.	** the SQL function is running.
Line 4173 SQLITE_API void sqlite3_set_auxdata(sqlite3_context*,	Line 4742 SQLITE_API void sqlite3_set_auxdata(sqlite3_context*,
** the content before returning.	** the content before returning.
**	**
** The typedef is necessary to work around problems in certain	** The typedef is necessary to work around problems in certain
** C++ compilers. See ticket #2191.	** C++ compilers.
*/	*/
typedef void (sqlite3_destructor_type)(void);	typedef void (sqlite3_destructor_type)(void);
#define SQLITE_STATIC ((sqlite3_destructor_type)0)	#define SQLITE_STATIC ((sqlite3_destructor_type)0)
Line 4181 typedef void (sqlite3_destructor_type)(void);	Line 4750 typedef void (sqlite3_destructor_type)(void);

/*	/*
** CAPI3REF: Setting The Result Of An SQL Function	** CAPI3REF: Setting The Result Of An SQL Function
	** METHOD: sqlite3_context
**	**
** These routines are used by the xFunc or xFinal callbacks that	** These routines are used by the xFunc or xFinal callbacks that
** implement SQL functions and aggregates. See	** implement SQL functions and aggregates. See
Line 4196 typedef void (sqlite3_destructor_type)(void);	Line 4766 typedef void (sqlite3_destructor_type)(void);
** to by the second parameter and which is N bytes long where N is the	** to by the second parameter and which is N bytes long where N is the
** third parameter.	** third parameter.
**	**
** ^The sqlite3_result_zeroblob() interfaces set the result of	** ^The sqlite3_result_zeroblob(C,N) and sqlite3_result_zeroblob64(C,N)
** the application-defined function to be a BLOB containing all zero	** interfaces set the result of the application-defined function to be
** bytes and N bytes in size, where N is the value of the 2nd parameter.	** a BLOB containing all zero bytes and N bytes in size.
**	**
** ^The sqlite3_result_double() interface sets the result from	** ^The sqlite3_result_double() interface sets the result from
** an application-defined function to be a floating point value specified	** an application-defined function to be a floating point value specified
Line 4247 typedef void (sqlite3_destructor_type)(void);	Line 4817 typedef void (sqlite3_destructor_type)(void);
** set the return value of the application-defined function to be	** set the return value of the application-defined function to be
** a text string which is represented as UTF-8, UTF-16 native byte order,	** a text string which is represented as UTF-8, UTF-16 native byte order,
** UTF-16 little endian, or UTF-16 big endian, respectively.	** UTF-16 little endian, or UTF-16 big endian, respectively.
	** ^The sqlite3_result_text64() interface sets the return value of an
	** application-defined function to be a text string in an encoding
	** specified by the fifth (and last) parameter, which must be one
	** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE].
** ^SQLite takes the text result from the application from	** ^SQLite takes the text result from the application from
** the 2nd parameter of the sqlite3_result_text* interfaces.	** the 2nd parameter of the sqlite3_result_text* interfaces.
** ^If the 3rd parameter to the sqlite3_result_text* interfaces	** ^If the 3rd parameter to the sqlite3_result_text* interfaces
Line 4276 typedef void (sqlite3_destructor_type)(void);	Line 4850 typedef void (sqlite3_destructor_type)(void);
** from [sqlite3_malloc()] before it returns.	** from [sqlite3_malloc()] before it returns.
**	**
** ^The sqlite3_result_value() interface sets the result of	** ^The sqlite3_result_value() interface sets the result of
** the application-defined function to be a copy the	** the application-defined function to be a copy of the
** [unprotected sqlite3_value] object specified by the 2nd parameter. ^The	** [unprotected sqlite3_value] object specified by the 2nd parameter. ^The
** sqlite3_result_value() interface makes a copy of the [sqlite3_value]	** sqlite3_result_value() interface makes a copy of the [sqlite3_value]
** so that the [sqlite3_value] specified in the parameter may change or	** so that the [sqlite3_value] specified in the parameter may change or
Line 4290 typedef void (sqlite3_destructor_type)(void);	Line 4864 typedef void (sqlite3_destructor_type)(void);
** the [sqlite3_context] pointer, the results are undefined.	** the [sqlite3_context] pointer, the results are undefined.
*/	*/
SQLITE_API void sqlite3_result_blob(sqlite3_context, const void, int, void()(void));	SQLITE_API void sqlite3_result_blob(sqlite3_context, const void, int, void()(void));
	SQLITE_API void sqlite3_result_blob64(sqlite3_context,const void,
	sqlite3_uint64,void()(void));
SQLITE_API void sqlite3_result_double(sqlite3_context*, double);	SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
SQLITE_API void sqlite3_result_error(sqlite3_context, const char, int);	SQLITE_API void sqlite3_result_error(sqlite3_context, const char, int);
SQLITE_API void sqlite3_result_error16(sqlite3_context, const void, int);	SQLITE_API void sqlite3_result_error16(sqlite3_context, const void, int);
Line 4300 SQLITE_API void sqlite3_result_int(sqlite3_context*, i	Line 4876 SQLITE_API void sqlite3_result_int(sqlite3_context*, i
SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);	SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
SQLITE_API void sqlite3_result_null(sqlite3_context*);	SQLITE_API void sqlite3_result_null(sqlite3_context*);
SQLITE_API void sqlite3_result_text(sqlite3_context, const char, int, void()(void));	SQLITE_API void sqlite3_result_text(sqlite3_context, const char, int, void()(void));
	SQLITE_API void sqlite3_result_text64(sqlite3_context, const char,sqlite3_uint64,
	void()(void), unsigned char encoding);
SQLITE_API void sqlite3_result_text16(sqlite3_context, const void, int, void()(void));	SQLITE_API void sqlite3_result_text16(sqlite3_context, const void, int, void()(void));
SQLITE_API void sqlite3_result_text16le(sqlite3_context, const void, int,void()(void));	SQLITE_API void sqlite3_result_text16le(sqlite3_context, const void, int,void()(void));
SQLITE_API void sqlite3_result_text16be(sqlite3_context, const void, int,void()(void));	SQLITE_API void sqlite3_result_text16be(sqlite3_context, const void, int,void()(void));
SQLITE_API void sqlite3_result_value(sqlite3_context, sqlite3_value);	SQLITE_API void sqlite3_result_value(sqlite3_context, sqlite3_value);
SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);	SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
	SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);


/*	/*
	** CAPI3REF: Setting The Subtype Of An SQL Function
	** METHOD: sqlite3_context
	**
	** The sqlite3_result_subtype(C,T) function causes the subtype of
	** the result from the [application-defined SQL function] with
	** [sqlite3_context] C to be the value T. Only the lower 8 bits
	** of the subtype T are preserved in current versions of SQLite;
	** higher order bits are discarded.
	** The number of subtype bytes preserved by SQLite might increase
	** in future releases of SQLite.
	*/
	SQLITE_API void sqlite3_result_subtype(sqlite3_context*,unsigned int);

	/*
** CAPI3REF: Define New Collating Sequences	** CAPI3REF: Define New Collating Sequences
	** METHOD: sqlite3
**	**
** ^These functions add, remove, or modify a [collation] associated	** ^These functions add, remove, or modify a [collation] associated
** with the [database connection] specified as the first argument.	** with the [database connection] specified as the first argument.
Line 4410 SQLITE_API int sqlite3_create_collation16(	Line 5005 SQLITE_API int sqlite3_create_collation16(

/*	/*
** CAPI3REF: Collation Needed Callbacks	** CAPI3REF: Collation Needed Callbacks
	** METHOD: sqlite3
**	**
** ^To avoid having to register all collation sequences before a database	** ^To avoid having to register all collation sequences before a database
** can be used, a single callback function may be registered with the	** can be used, a single callback function may be registered with the
Line 4457 SQLITE_API int sqlite3_key(	Line 5053 SQLITE_API int sqlite3_key(
sqlite3 db, / Database to be rekeyed */	sqlite3 db, / Database to be rekeyed */
const void pKey, int nKey / The key */	const void pKey, int nKey / The key */
);	);
	SQLITE_API int sqlite3_key_v2(
	sqlite3 db, / Database to be rekeyed */
	const char zDbName, / Name of the database */
	const void pKey, int nKey / The key */
	);

/*	/*
** Change the key on an open database. If the current database is not	** Change the key on an open database. If the current database is not
Line 4470 SQLITE_API int sqlite3_rekey(	Line 5071 SQLITE_API int sqlite3_rekey(
sqlite3 db, / Database to be rekeyed */	sqlite3 db, / Database to be rekeyed */
const void pKey, int nKey / The new key */	const void pKey, int nKey / The new key */
);	);
	SQLITE_API int sqlite3_rekey_v2(
	sqlite3 db, / Database to be rekeyed */
	const char zDbName, / Name of the database */
	const void pKey, int nKey / The new key */
	);

/*	/*
** Specify the activation key for a SEE database. Unless	** Specify the activation key for a SEE database. Unless
Line 4519 SQLITE_API int sqlite3_sleep(int);	Line 5125 SQLITE_API int sqlite3_sleep(int);
** is a NULL pointer, then SQLite performs a search for an appropriate	** is a NULL pointer, then SQLite performs a search for an appropriate
** temporary file directory.	** temporary file directory.
**	**
	** Applications are strongly discouraged from using this global variable.
	** It is required to set a temporary folder on Windows Runtime (WinRT).
	** But for all other platforms, it is highly recommended that applications
	** neither read nor write this variable. This global variable is a relic
	** that exists for backwards compatibility of legacy applications and should
	** be avoided in new projects.
	**
** It is not safe to read or modify this variable in more than one	** It is not safe to read or modify this variable in more than one
** thread at a time. It is not safe to read or modify this variable	** thread at a time. It is not safe to read or modify this variable
** if a [database connection] is being used at the same time in a separate	** if a [database connection] is being used at the same time in a separate
Line 4537 SQLITE_API int sqlite3_sleep(int);	Line 5150 SQLITE_API int sqlite3_sleep(int);
** Hence, if this variable is modified directly, either it should be	** Hence, if this variable is modified directly, either it should be
** made NULL or made to point to memory obtained from [sqlite3_malloc]	** made NULL or made to point to memory obtained from [sqlite3_malloc]
** or else the use of the [temp_store_directory pragma] should be avoided.	** or else the use of the [temp_store_directory pragma] should be avoided.
	** Except when requested by the [temp_store_directory pragma], SQLite
	** does not free the memory that sqlite3_temp_directory points to. If
	** the application wants that memory to be freed, it must do
	** so itself, taking care to only do so after all [database connection]
	** objects have been destroyed.
**	**
** <b>Note to Windows Runtime users:</b> The temporary directory must be set	** <b>Note to Windows Runtime users:</b> The temporary directory must be set
** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various	** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various
Line 4595 SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory;	Line 5213 SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory;
/*	/*
** CAPI3REF: Test For Auto-Commit Mode	** CAPI3REF: Test For Auto-Commit Mode
** KEYWORDS: {autocommit mode}	** KEYWORDS: {autocommit mode}
	** METHOD: sqlite3
**	**
** ^The sqlite3_get_autocommit() interface returns non-zero or	** ^The sqlite3_get_autocommit() interface returns non-zero or
** zero if the given database connection is or is not in autocommit mode,	** zero if the given database connection is or is not in autocommit mode,
Line 4617 SQLITE_API int sqlite3_get_autocommit(sqlite3*);	Line 5236 SQLITE_API int sqlite3_get_autocommit(sqlite3*);

/*	/*
** CAPI3REF: Find The Database Handle Of A Prepared Statement	** CAPI3REF: Find The Database Handle Of A Prepared Statement
	** METHOD: sqlite3_stmt
**	**
** ^The sqlite3_db_handle interface returns the [database connection] handle	** ^The sqlite3_db_handle interface returns the [database connection] handle
** to which a [prepared statement] belongs. ^The [database connection]	** to which a [prepared statement] belongs. ^The [database connection]
Line 4629 SQLITE_API sqlite3 sqlite3_db_handle(sqlite3_stmt);	Line 5249 SQLITE_API sqlite3 sqlite3_db_handle(sqlite3_stmt);

/*	/*
** CAPI3REF: Return The Filename For A Database Connection	** CAPI3REF: Return The Filename For A Database Connection
	** METHOD: sqlite3
**	**
** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename	** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename
** associated with database N of connection D. ^The main database file	** associated with database N of connection D. ^The main database file
Line 4645 SQLITE_API const char sqlite3_db_filename(sqlite3 db	Line 5266 SQLITE_API const char sqlite3_db_filename(sqlite3 db

/*	/*
** CAPI3REF: Determine if a database is read-only	** CAPI3REF: Determine if a database is read-only
	** METHOD: sqlite3
**	**
** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N	** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N
** of connection D is read-only, 0 if it is read/write, or -1 if N is not	** of connection D is read-only, 0 if it is read/write, or -1 if N is not
Line 4654 SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const	Line 5276 SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const

/*	/*
** CAPI3REF: Find the next prepared statement	** CAPI3REF: Find the next prepared statement
	** METHOD: sqlite3
**	**
** ^This interface returns a pointer to the next [prepared statement] after	** ^This interface returns a pointer to the next [prepared statement] after
** pStmt associated with the [database connection] pDb. ^If pStmt is NULL	** pStmt associated with the [database connection] pDb. ^If pStmt is NULL
Line 4669 SQLITE_API sqlite3_stmt sqlite3_next_stmt(sqlite3 pD	Line 5292 SQLITE_API sqlite3_stmt sqlite3_next_stmt(sqlite3 pD

/*	/*
** CAPI3REF: Commit And Rollback Notification Callbacks	** CAPI3REF: Commit And Rollback Notification Callbacks
	** METHOD: sqlite3
**	**
** ^The sqlite3_commit_hook() interface registers a callback	** ^The sqlite3_commit_hook() interface registers a callback
** function to be invoked whenever a transaction is [COMMIT \| committed].	** function to be invoked whenever a transaction is [COMMIT \| committed].
Line 4718 SQLITE_API void sqlite3_rollback_hook(sqlite3, void(	Line 5342 SQLITE_API void sqlite3_rollback_hook(sqlite3, void(

/*	/*
** CAPI3REF: Data Change Notification Callbacks	** CAPI3REF: Data Change Notification Callbacks
	** METHOD: sqlite3
**	**
** ^The sqlite3_update_hook() interface registers a callback function	** ^The sqlite3_update_hook() interface registers a callback function
** with the [database connection] identified by the first argument	** with the [database connection] identified by the first argument
** to be invoked whenever a row is updated, inserted or deleted.	** to be invoked whenever a row is updated, inserted or deleted in
	** a [rowid table].
** ^Any callback set by a previous call to this function	** ^Any callback set by a previous call to this function
** for the same database connection is overridden.	** for the same database connection is overridden.
**	**
** ^The second argument is a pointer to the function to invoke when a	** ^The second argument is a pointer to the function to invoke when a
** row is updated, inserted or deleted.	** row is updated, inserted or deleted in a rowid table.
** ^The first argument to the callback is a copy of the third argument	** ^The first argument to the callback is a copy of the third argument
** to sqlite3_update_hook().	** to sqlite3_update_hook().
** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],	** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
Line 4739 SQLITE_API void sqlite3_rollback_hook(sqlite3, void(	Line 5365 SQLITE_API void sqlite3_rollback_hook(sqlite3, void(
**	**
** ^(The update hook is not invoked when internal system tables are	** ^(The update hook is not invoked when internal system tables are
** modified (i.e. sqlite_master and sqlite_sequence).)^	** modified (i.e. sqlite_master and sqlite_sequence).)^
	** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified.
**	**
** ^In the current implementation, the update hook	** ^In the current implementation, the update hook
** is not invoked when duplication rows are deleted because of an	** is not invoked when duplication rows are deleted because of an
Line 4759 SQLITE_API void sqlite3_rollback_hook(sqlite3, void(	Line 5386 SQLITE_API void sqlite3_rollback_hook(sqlite3, void(
** on the same [database connection] D, or NULL for	** on the same [database connection] D, or NULL for
** the first call on D.	** the first call on D.
**	**
** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()]	** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()],
** interfaces.	** and [sqlite3_preupdate_hook()] interfaces.
*/	*/
SQLITE_API void *sqlite3_update_hook(	SQLITE_API void *sqlite3_update_hook(
sqlite3*,	sqlite3*,
Line 4792 SQLITE_API void *sqlite3_update_hook(	Line 5419 SQLITE_API void *sqlite3_update_hook(
** future releases of SQLite. Applications that care about shared	** future releases of SQLite. Applications that care about shared
** cache setting should set it explicitly.	** cache setting should set it explicitly.
**	**
	** Note: This method is disabled on MacOS X 10.7 and iOS version 5.0
	** and will always return SQLITE_MISUSE. On those systems,
	** shared cache mode should be enabled per-database connection via
	** [sqlite3_open_v2()] with [SQLITE_OPEN_SHAREDCACHE].
	**
** This interface is threadsafe on processors where writing a	** This interface is threadsafe on processors where writing a
** 32-bit integer is atomic.	** 32-bit integer is atomic.
**	**
Line 4817 SQLITE_API int sqlite3_release_memory(int);	Line 5449 SQLITE_API int sqlite3_release_memory(int);

/*	/*
** CAPI3REF: Free Memory Used By A Database Connection	** CAPI3REF: Free Memory Used By A Database Connection
	** METHOD: sqlite3
**	**
** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap	** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap
** memory as possible from database connection D. Unlike the	** memory as possible from database connection D. Unlike the
** [sqlite3_release_memory()] interface, this interface is effect even	** [sqlite3_release_memory()] interface, this interface is in effect even
** when then [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is	** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is
** omitted.	** omitted.
**	**
** See also: [sqlite3_release_memory()]	** See also: [sqlite3_release_memory()]
Line 4894 SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_li	Line 5527 SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_li

/*	/*
** CAPI3REF: Extract Metadata About A Column Of A Table	** CAPI3REF: Extract Metadata About A Column Of A Table
	** METHOD: sqlite3
**	**
** ^This routine returns metadata about a specific column of a specific	** ^(The sqlite3_table_column_metadata(X,D,T,C,....) routine returns
** database table accessible using the [database connection] handle	** information about column C of table T in database D
** passed as the first function argument.	** on [database connection] X.)^ ^The sqlite3_table_column_metadata()
	** interface returns SQLITE_OK and fills in the non-NULL pointers in
	** the final five arguments with appropriate values if the specified
	** column exists. ^The sqlite3_table_column_metadata() interface returns
	** SQLITE_ERROR and if the specified column does not exist.
	** ^If the column-name parameter to sqlite3_table_column_metadata() is a
	** NULL pointer, then this routine simply checks for the existence of the
	** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it
	** does not.
**	**
** ^The column is identified by the second, third and fourth parameters to	** ^The column is identified by the second, third and fourth parameters to
** this function. ^The second parameter is either the name of the database	** this function. ^(The second parameter is either the name of the database
** (i.e. "main", "temp", or an attached database) containing the specified	** (i.e. "main", "temp", or an attached database) containing the specified
** table or NULL. ^If it is NULL, then all attached databases are searched	** table or NULL.)^ ^If it is NULL, then all attached databases are searched
** for the table using the same algorithm used by the database engine to	** for the table using the same algorithm used by the database engine to
** resolve unqualified table references.	** resolve unqualified table references.
**	**
** ^The third and fourth parameters to this function are the table and column	** ^The third and fourth parameters to this function are the table and column
** name of the desired column, respectively. Neither of these parameters	** name of the desired column, respectively.
** may be NULL.
**	**
** ^Metadata is returned by writing to the memory locations passed as the 5th	** ^Metadata is returned by writing to the memory locations passed as the 5th
** and subsequent parameters to this function. ^Any of these arguments may be	** and subsequent parameters to this function. ^Any of these arguments may be
Line 4927 SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_li	Line 5568 SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_li
** </blockquote>)^	** </blockquote>)^
**	**
** ^The memory pointed to by the character pointers returned for the	** ^The memory pointed to by the character pointers returned for the
** declaration type and collation sequence is valid only until the next	** declaration type and collation sequence is valid until the next
** call to any SQLite API function.	** call to any SQLite API function.
**	**
** ^If the specified table is actually a view, an [error code] is returned.	** ^If the specified table is actually a view, an [error code] is returned.
**	**
** ^If the specified column is "rowid", "oid" or "_rowid_" and an	** ^If the specified column is "rowid", "oid" or "_rowid_" and the table
	** is not a [WITHOUT ROWID] table and an
** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output	** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output
** parameters are set for the explicitly declared column. ^(If there is no	** parameters are set for the explicitly declared column. ^(If there is no
** explicitly declared [INTEGER PRIMARY KEY] column, then the output	** [INTEGER PRIMARY KEY] column, then the outputs
** parameters are set as follows:	** for the [rowid] are set as follows:
**	**
** <pre>	** <pre>
** data type: "INTEGER"	** data type: "INTEGER"
Line 4946 SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_li	Line 5588 SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_li
** auto increment: 0	** auto increment: 0
** </pre>)^	** </pre>)^
**	**
** ^(This function may load one or more schemas from database files. If an	** ^This function causes all database schemas to be read from disk and
** error occurs during this process, or if the requested table or column	** parsed, if that has not already been done, and returns an error if
** cannot be found, an [error code] is returned and an error message left	** any errors are encountered while loading the schema.
** in the [database connection] (to be retrieved using sqlite3_errmsg()).)^
**
** ^This API is only available if the library was compiled with the
** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined.
*/	*/
SQLITE_API int sqlite3_table_column_metadata(	SQLITE_API int sqlite3_table_column_metadata(
sqlite3 db, / Connection handle */	sqlite3 db, / Connection handle */
Line 4968 SQLITE_API int sqlite3_table_column_metadata(	Line 5606 SQLITE_API int sqlite3_table_column_metadata(

/*	/*
** CAPI3REF: Load An Extension	** CAPI3REF: Load An Extension
	** METHOD: sqlite3
**	**
** ^This interface loads an SQLite extension library from the named file.	** ^This interface loads an SQLite extension library from the named file.
**	**
** ^The sqlite3_load_extension() interface attempts to load an	** ^The sqlite3_load_extension() interface attempts to load an
** SQLite extension library contained in the file zFile.	** [SQLite extension] library contained in the file zFile. If
	** the file cannot be loaded directly, attempts are made to load
	** with various operating-system specific extensions added.
	** So for example, if "samplelib" cannot be loaded, then names like
	** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might
	** be tried also.
**	**
** ^The entry point is zProc.	** ^The entry point is zProc.
** ^zProc may be 0, in which case the name of the entry point	** ^(zProc may be 0, in which case SQLite will try to come up with an
** defaults to "sqlite3_extension_init".	** entry point name on its own. It first tries "sqlite3_extension_init".
	** If that does not work, it constructs a name "sqlite3_X_init" where the
	** X is consists of the lower-case equivalent of all ASCII alphabetic
	** characters in the filename from the last "/" to the first following
	** "." and omitting any initial "lib".)^
** ^The sqlite3_load_extension() interface returns	** ^The sqlite3_load_extension() interface returns
** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.	** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
** ^If an error occurs and pzErrMsg is not 0, then the	** ^If an error occurs and pzErrMsg is not 0, then the
Line 4986 SQLITE_API int sqlite3_table_column_metadata(	Line 5634 SQLITE_API int sqlite3_table_column_metadata(
** should free this memory by calling [sqlite3_free()].	** should free this memory by calling [sqlite3_free()].
**	**
** ^Extension loading must be enabled using	** ^Extension loading must be enabled using
** [sqlite3_enable_load_extension()] prior to calling this API,	** [sqlite3_enable_load_extension()] or
	** [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],1,NULL)
	** prior to calling this API,
** otherwise an error will be returned.	** otherwise an error will be returned.
**	**
	** <b>Security warning:</b> It is recommended that the
	** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this
	** interface. The use of the [sqlite3_enable_load_extension()] interface
	** should be avoided. This will keep the SQL function [load_extension()]
	** disabled and prevent SQL injections from giving attackers
	** access to extension loading capabilities.
	**
** See also the [load_extension() SQL function].	** See also the [load_extension() SQL function].
*/	*/
SQLITE_API int sqlite3_load_extension(	SQLITE_API int sqlite3_load_extension(
Line 5000 SQLITE_API int sqlite3_load_extension(	Line 5657 SQLITE_API int sqlite3_load_extension(

/*	/*
** CAPI3REF: Enable Or Disable Extension Loading	** CAPI3REF: Enable Or Disable Extension Loading
	** METHOD: sqlite3
**	**
** ^So as not to open security holes in older applications that are	** ^So as not to open security holes in older applications that are
** unprepared to deal with extension loading, and as a means of disabling	** unprepared to deal with [extension loading], and as a means of disabling
** extension loading while evaluating user-entered SQL, the following API	** [extension loading] while evaluating user-entered SQL, the following API
** is provided to turn the [sqlite3_load_extension()] mechanism on and off.	** is provided to turn the [sqlite3_load_extension()] mechanism on and off.
**	**
** ^Extension loading is off by default. See ticket #1863.	** ^Extension loading is off by default.
** ^Call the sqlite3_enable_load_extension() routine with onoff==1	** ^Call the sqlite3_enable_load_extension() routine with onoff==1
** to turn extension loading on and call it with onoff==0 to turn	** to turn extension loading on and call it with onoff==0 to turn
** it back off again.	** it back off again.
	**
	** ^This interface enables or disables both the C-API
	** [sqlite3_load_extension()] and the SQL function [load_extension()].
	** ^(Use [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],..)
	** to enable or disable only the C-API.)^
	**
	** <b>Security warning:</b> It is recommended that extension loading
	** be disabled using the [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method
	** rather than this interface, so the [load_extension()] SQL function
	** remains disabled. This will prevent SQL injections from giving attackers
	** access to extension loading capabilities.
*/	*/
SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);	SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);

Line 5018 SQLITE_API int sqlite3_enable_load_extension(sqlite3 *	Line 5687 SQLITE_API int sqlite3_enable_load_extension(sqlite3 *
**	**
** ^This interface causes the xEntryPoint() function to be invoked for	** ^This interface causes the xEntryPoint() function to be invoked for
** each new [database connection] that is created. The idea here is that	** each new [database connection] that is created. The idea here is that
** xEntryPoint() is the entry point for a statically linked SQLite extension	** xEntryPoint() is the entry point for a statically linked [SQLite extension]
** that is to be automatically loaded into all new database connections.	** that is to be automatically loaded into all new database connections.
**	**
** ^(Even though the function prototype shows that xEntryPoint() takes	** ^(Even though the function prototype shows that xEntryPoint() takes
** no arguments and returns void, SQLite invokes xEntryPoint() with three	** no arguments and returns void, SQLite invokes xEntryPoint() with three
** arguments and expects and integer result as if the signature of the	** arguments and expects an integer result as if the signature of the
** entry point where as follows:	** entry point where as follows:
**	**
** <blockquote><pre>	** <blockquote><pre>
Line 5046 SQLITE_API int sqlite3_enable_load_extension(sqlite3 *	Line 5715 SQLITE_API int sqlite3_enable_load_extension(sqlite3 *
** on the list of automatic extensions is a harmless no-op. ^No entry point	** on the list of automatic extensions is a harmless no-op. ^No entry point
** will be called more than once for each database connection that is opened.	** will be called more than once for each database connection that is opened.
**	**
** See also: [sqlite3_reset_auto_extension()].	** See also: [sqlite3_reset_auto_extension()]
	** and [sqlite3_cancel_auto_extension()]
*/	*/
SQLITE_API int sqlite3_auto_extension(void (*xEntryPoint)(void));	SQLITE_API int sqlite3_auto_extension(void(*xEntryPoint)(void));

/*	/*
	** CAPI3REF: Cancel Automatic Extension Loading
	**
	** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the
	** initialization routine X that was registered using a prior call to
	** [sqlite3_auto_extension(X)]. ^The [sqlite3_cancel_auto_extension(X)]
	** routine returns 1 if initialization routine X was successfully
	** unregistered and it returns 0 if X was not on the list of initialization
	** routines.
	*/
	SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));

	/*
** CAPI3REF: Reset Automatic Extension Loading	** CAPI3REF: Reset Automatic Extension Loading
**	**
** ^This interface disables all automatic extensions previously	** ^This interface disables all automatic extensions previously
Line 5158 struct sqlite3_module {	Line 5840 struct sqlite3_module {
** ^Information about the ORDER BY clause is stored in aOrderBy[].	** ^Information about the ORDER BY clause is stored in aOrderBy[].
** ^Each term of aOrderBy records a column of the ORDER BY clause.	** ^Each term of aOrderBy records a column of the ORDER BY clause.
**	**
	** The colUsed field indicates which columns of the virtual table may be
	** required by the current scan. Virtual table columns are numbered from
	** zero in the order in which they appear within the CREATE TABLE statement
	** passed to sqlite3_declare_vtab(). For the first 63 columns (columns 0-62),
	** the corresponding bit is set within the colUsed mask if the column may be
	** required by SQLite. If the table has at least 64 columns and any column
	** to the right of the first 63 is required, then bit 63 of colUsed is also
	** set. In other words, column iCol may be required if the expression
	** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to
	** non-zero.
	**
** The [xBestIndex] method must fill aConstraintUsage[] with information	** The [xBestIndex] method must fill aConstraintUsage[] with information
** about what parameters to pass to xFilter. ^If argvIndex>0 then	** about what parameters to pass to xFilter. ^If argvIndex>0 then
** the right-hand side of the corresponding aConstraint[] is evaluated	** the right-hand side of the corresponding aConstraint[] is evaluated
Line 5174 struct sqlite3_module {	Line 5867 struct sqlite3_module {
** the correct order to satisfy the ORDER BY clause so that no separate	** the correct order to satisfy the ORDER BY clause so that no separate
** sorting step is required.	** sorting step is required.
**	**
** ^The estimatedCost value is an estimate of the cost of doing the	** ^The estimatedCost value is an estimate of the cost of a particular
** particular lookup. A full scan of a table with N entries should have	** strategy. A cost of N indicates that the cost of the strategy is similar
** a cost of N. A binary search of a table of N entries should have a	** to a linear scan of an SQLite table with N rows. A cost of log(N)
** cost of approximately log(N).	** indicates that the expense of the operation is similar to that of a
	** binary search on a unique indexed field of an SQLite table with N rows.
	**
	** ^The estimatedRows value is an estimate of the number of rows that
	** will be returned by the strategy.
	**
	** The xBestIndex method may optionally populate the idxFlags field with a
	** mask of SQLITE_INDEX_SCAN_* flags. Currently there is only one such flag -
	** SQLITE_INDEX_SCAN_UNIQUE. If the xBestIndex method sets this flag, SQLite
	** assumes that the strategy may visit at most one row.
	**
	** Additionally, if xBestIndex sets the SQLITE_INDEX_SCAN_UNIQUE flag, then
	** SQLite also assumes that if a call to the xUpdate() method is made as
	** part of the same statement to delete or update a virtual table row and the
	** implementation returns SQLITE_CONSTRAINT, then there is no need to rollback
	** any database changes. In other words, if the xUpdate() returns
	** SQLITE_CONSTRAINT, the database contents must be exactly as they were
	** before xUpdate was called. By contrast, if SQLITE_INDEX_SCAN_UNIQUE is not
	** set and xUpdate returns SQLITE_CONSTRAINT, any database changes made by
	** the xUpdate method are automatically rolled back by SQLite.
	**
	** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
	** structure for SQLite version 3.8.2. If a virtual table extension is
	** used with an SQLite version earlier than 3.8.2, the results of attempting
	** to read or write the estimatedRows field are undefined (but are likely
	** to included crashing the application). The estimatedRows field should
	** therefore only be used if [sqlite3_libversion_number()] returns a
	** value greater than or equal to 3008002. Similarly, the idxFlags field
	** was added for version 3.9.0. It may therefore only be used if
	** sqlite3_libversion_number() returns a value greater than or equal to
	** 3009000.
*/	*/
struct sqlite3_index_info {	struct sqlite3_index_info {
/* Inputs */	/* Inputs */
int nConstraint; /* Number of entries in aConstraint */	int nConstraint; /* Number of entries in aConstraint */
struct sqlite3_index_constraint {	struct sqlite3_index_constraint {
int iColumn; /* Column on left-hand side of constraint */	int iColumn; /* Column constrained. -1 for ROWID */
unsigned char op; /* Constraint operator */	unsigned char op; /* Constraint operator */
unsigned char usable; /* True if this constraint is usable */	unsigned char usable; /* True if this constraint is usable */
int iTermOffset; /* Used internally - xBestIndex should ignore */	int iTermOffset; /* Used internally - xBestIndex should ignore */
Line 5202 struct sqlite3_index_info {	Line 5925 struct sqlite3_index_info {
char idxStr; / String, possibly obtained from sqlite3_malloc */	char idxStr; / String, possibly obtained from sqlite3_malloc */
int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */	int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */
int orderByConsumed; /* True if output is already ordered */	int orderByConsumed; /* True if output is already ordered */
double estimatedCost; /* Estimated cost of using this index */	double estimatedCost; /* Estimated cost of using this index */
	/* Fields below are only available in SQLite 3.8.2 and later */
	sqlite3_int64 estimatedRows; /* Estimated number of rows returned */
	/* Fields below are only available in SQLite 3.9.0 and later */
	int idxFlags; /* Mask of SQLITE_INDEX_SCAN_* flags */
	/* Fields below are only available in SQLite 3.10.0 and later */
	sqlite3_uint64 colUsed; /* Input: Mask of columns used by statement */
};	};

/*	/*
	** CAPI3REF: Virtual Table Scan Flags
	*/
	#define SQLITE_INDEX_SCAN_UNIQUE 1 /* Scan visits at most 1 row */

	/*
** CAPI3REF: Virtual Table Constraint Operator Codes	** CAPI3REF: Virtual Table Constraint Operator Codes
**	**
** These macros defined the allowed values for the	** These macros defined the allowed values for the
Line 5213 struct sqlite3_index_info {	Line 5947 struct sqlite3_index_info {
** an operator that is part of a constraint term in the wHERE clause of	** an operator that is part of a constraint term in the wHERE clause of
** a query that uses a [virtual table].	** a query that uses a [virtual table].
*/	*/
#define SQLITE_INDEX_CONSTRAINT_EQ 2	#define SQLITE_INDEX_CONSTRAINT_EQ 2
#define SQLITE_INDEX_CONSTRAINT_GT 4	#define SQLITE_INDEX_CONSTRAINT_GT 4
#define SQLITE_INDEX_CONSTRAINT_LE 8	#define SQLITE_INDEX_CONSTRAINT_LE 8
#define SQLITE_INDEX_CONSTRAINT_LT 16	#define SQLITE_INDEX_CONSTRAINT_LT 16
#define SQLITE_INDEX_CONSTRAINT_GE 32	#define SQLITE_INDEX_CONSTRAINT_GE 32
#define SQLITE_INDEX_CONSTRAINT_MATCH 64	#define SQLITE_INDEX_CONSTRAINT_MATCH 64
	#define SQLITE_INDEX_CONSTRAINT_LIKE 65
	#define SQLITE_INDEX_CONSTRAINT_GLOB 66
	#define SQLITE_INDEX_CONSTRAINT_REGEXP 67

/*	/*
** CAPI3REF: Register A Virtual Table Implementation	** CAPI3REF: Register A Virtual Table Implementation
	** METHOD: sqlite3
**	**
** ^These routines are used to register a new [virtual table module] name.	** ^These routines are used to register a new [virtual table module] name.
** ^Module names must be registered before	** ^Module names must be registered before
Line 5279 SQLITE_API int sqlite3_create_module_v2(	Line 6017 SQLITE_API int sqlite3_create_module_v2(
*/	*/
struct sqlite3_vtab {	struct sqlite3_vtab {
const sqlite3_module pModule; / The module for this virtual table */	const sqlite3_module pModule; / The module for this virtual table */
int nRef; /* NO LONGER USED */	int nRef; /* Number of open cursors */
char zErrMsg; / Error message from sqlite3_mprintf() */	char zErrMsg; / Error message from sqlite3_mprintf() */
/* Virtual table implementations will typically add additional fields */	/* Virtual table implementations will typically add additional fields */
};	};
Line 5318 SQLITE_API int sqlite3_declare_vtab(sqlite3*, const ch	Line 6056 SQLITE_API int sqlite3_declare_vtab(sqlite3*, const ch

/*	/*
** CAPI3REF: Overload A Function For A Virtual Table	** CAPI3REF: Overload A Function For A Virtual Table
	** METHOD: sqlite3
**	**
** ^(Virtual tables can provide alternative implementations of functions	** ^(Virtual tables can provide alternative implementations of functions
** using the [xFindFunction] method of the [virtual table module].	** using the [xFindFunction] method of the [virtual table module].
Line 5360 typedef struct sqlite3_blob sqlite3_blob;	Line 6099 typedef struct sqlite3_blob sqlite3_blob;

/*	/*
** CAPI3REF: Open A BLOB For Incremental I/O	** CAPI3REF: Open A BLOB For Incremental I/O
	** METHOD: sqlite3
	** CONSTRUCTOR: sqlite3_blob
**	**
** ^(This interfaces opens a [BLOB handle \| handle] to the BLOB located	** ^(This interfaces opens a [BLOB handle \| handle] to the BLOB located
** in row iRow, column zColumn, table zTable in database zDb;	** in row iRow, column zColumn, table zTable in database zDb;
Line 5369 typedef struct sqlite3_blob sqlite3_blob;	Line 6110 typedef struct sqlite3_blob sqlite3_blob;
** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;	** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
** </pre>)^	** </pre>)^
**	**
	** ^(Parameter zDb is not the filename that contains the database, but
	** rather the symbolic name of the database. For attached databases, this is
	** the name that appears after the AS keyword in the [ATTACH] statement.
	** For the main database file, the database name is "main". For TEMP
	** tables, the database name is "temp".)^
	**
** ^If the flags parameter is non-zero, then the BLOB is opened for read	** ^If the flags parameter is non-zero, then the BLOB is opened for read
** and write access. ^If it is zero, the BLOB is opened for read access.	** and write access. ^If the flags parameter is zero, the BLOB is opened for
** ^It is not possible to open a column that is part of an index or primary	** read-only access.
** key for writing. ^If [foreign key constraints] are enabled, it is
** not possible to open a column that is part of a [child key] for writing.
**	**
** ^Note that the database name is not the filename that contains	** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is stored
** the database but rather the symbolic name of the database that	** in *ppBlob. Otherwise an [error code] is returned and, unless the error
** appears after the AS keyword when the database is connected using [ATTACH].	** code is SQLITE_MISUSE, *ppBlob is set to NULL.)^ ^This means that, provided
** ^For the main database file, the database name is "main".	** the API is not misused, it is always safe to call [sqlite3_blob_close()]
** ^For TEMP tables, the database name is "temp".	** on *ppBlob after this function it returns.
**	**
** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is written	** This function fails with SQLITE_ERROR if any of the following are true:
** to ppBlob. Otherwise an [error code] is returned and ppBlob is set	** <ul>
** to be a null pointer.)^	** <li> ^(Database zDb does not exist)^,
** ^This function sets the [database connection] error code and message	** <li> ^(Table zTable does not exist within database zDb)^,
** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()] and related	** <li> ^(Table zTable is a WITHOUT ROWID table)^,
** functions. ^Note that the *ppBlob variable is always initialized in a	** <li> ^(Column zColumn does not exist)^,
** way that makes it safe to invoke [sqlite3_blob_close()] on *ppBlob	** <li> ^(Row iRow is not present in the table)^,
** regardless of the success or failure of this routine.	** <li> ^(The specified column of row iRow contains a value that is not
	** a TEXT or BLOB value)^,
	** <li> ^(Column zColumn is part of an index, PRIMARY KEY or UNIQUE
	** constraint and the blob is being opened for read/write access)^,
	** <li> ^([foreign key constraints \| Foreign key constraints] are enabled,
	** column zColumn is part of a [child key] definition and the blob is
	** being opened for read/write access)^.
	** </ul>
**	**
	** ^Unless it returns SQLITE_MISUSE, this function sets the
	** [database connection] error code and message accessible via
	** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
	**
	**
** ^(If the row that a BLOB handle points to is modified by an	** ^(If the row that a BLOB handle points to is modified by an
** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects	** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
** then the BLOB handle is marked as "expired".	** then the BLOB handle is marked as "expired".
Line 5407 typedef struct sqlite3_blob sqlite3_blob;	Line 6164 typedef struct sqlite3_blob sqlite3_blob;
** blob.	** blob.
**	**
** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces	** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
** and the built-in [zeroblob] SQL function can be used, if desired,	** and the built-in [zeroblob] SQL function may be used to create a
** to create an empty, zero-filled blob in which to read or write using	** zero-filled blob to read or write using the incremental-blob interface.
** this interface.
**	**
** To avoid a resource leak, every open [BLOB handle] should eventually	** To avoid a resource leak, every open [BLOB handle] should eventually
** be released by a call to [sqlite3_blob_close()].	** be released by a call to [sqlite3_blob_close()].
Line 5426 SQLITE_API int sqlite3_blob_open(	Line 6182 SQLITE_API int sqlite3_blob_open(

/*	/*
** CAPI3REF: Move a BLOB Handle to a New Row	** CAPI3REF: Move a BLOB Handle to a New Row
	** METHOD: sqlite3_blob
**	**
** ^This function is used to move an existing blob handle so that it points	** ^This function is used to move an existing blob handle so that it points
** to a different row of the same database table. ^The new row is identified	** to a different row of the same database table. ^The new row is identified
Line 5446 SQLITE_API int sqlite3_blob_open(	Line 6203 SQLITE_API int sqlite3_blob_open(
**	**
** ^This function sets the database handle error code and message.	** ^This function sets the database handle error code and message.
*/	*/
SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);	SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);

/*	/*
** CAPI3REF: Close A BLOB Handle	** CAPI3REF: Close A BLOB Handle
	** DESTRUCTOR: sqlite3_blob
**	**
** ^Closes an open [BLOB handle].	** ^This function closes an open [BLOB handle]. ^(The BLOB handle is closed
	** unconditionally. Even if this routine returns an error code, the
	** handle is still closed.)^
**	**
** ^Closing a BLOB shall cause the current transaction to commit	** ^If the blob handle being closed was opened for read-write access, and if
** if there are no other BLOBs, no pending prepared statements, and the	** the database is in auto-commit mode and there are no other open read-write
** database connection is in [autocommit mode].	** blob handles or active write statements, the current transaction is
** ^If any writes were made to the BLOB, they might be held in cache	** committed. ^If an error occurs while committing the transaction, an error
** until the close operation if they will fit.	** code is returned and the transaction rolled back.
**	**
** ^(Closing the BLOB often forces the changes	** Calling this function with an argument that is not a NULL pointer or an
** out to disk and so if any I/O errors occur, they will likely occur	** open blob handle results in undefined behaviour. ^Calling this routine
** at the time when the BLOB is closed. Any errors that occur during	** with a null pointer (such as would be returned by a failed call to
** closing are reported as a non-zero return value.)^	** [sqlite3_blob_open()]) is a harmless no-op. ^Otherwise, if this function
**	** is passed a valid open blob handle, the values returned by the
** ^(The BLOB is closed unconditionally. Even if this routine returns	** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
** an error code, the BLOB is still closed.)^
**
** ^Calling this routine with a null pointer (such as would be returned
** by a failed call to [sqlite3_blob_open()]) is a harmless no-op.
*/	*/
SQLITE_API int sqlite3_blob_close(sqlite3_blob *);	SQLITE_API int sqlite3_blob_close(sqlite3_blob *);

/*	/*
** CAPI3REF: Return The Size Of An Open BLOB	** CAPI3REF: Return The Size Of An Open BLOB
	** METHOD: sqlite3_blob
**	**
** ^Returns the size in bytes of the BLOB accessible via the	** ^Returns the size in bytes of the BLOB accessible via the
** successfully opened [BLOB handle] in its only argument. ^The	** successfully opened [BLOB handle] in its only argument. ^The
Line 5489 SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);	Line 6246 SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);

/*	/*
** CAPI3REF: Read Data From A BLOB Incrementally	** CAPI3REF: Read Data From A BLOB Incrementally
	** METHOD: sqlite3_blob
**	**
** ^(This function is used to read data from an open [BLOB handle] into a	** ^(This function is used to read data from an open [BLOB handle] into a
** caller-supplied buffer. N bytes of data are copied into buffer Z	** caller-supplied buffer. N bytes of data are copied into buffer Z
Line 5517 SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void	Line 6275 SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void

/*	/*
** CAPI3REF: Write Data Into A BLOB Incrementally	** CAPI3REF: Write Data Into A BLOB Incrementally
	** METHOD: sqlite3_blob
**	**
** ^This function is used to write data into an open [BLOB handle] from a	** ^(This function is used to write data into an open [BLOB handle] from a
** caller-supplied buffer. ^N bytes of data are copied from the buffer Z	** caller-supplied buffer. N bytes of data are copied from the buffer Z
** into the open BLOB, starting at offset iOffset.	** into the open BLOB, starting at offset iOffset.)^
**	**
	** ^(On success, sqlite3_blob_write() returns SQLITE_OK.
	** Otherwise, an [error code] or an [extended error code] is returned.)^
	** ^Unless SQLITE_MISUSE is returned, this function sets the
	** [database connection] error code and message accessible via
	** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
	**
** ^If the [BLOB handle] passed as the first argument was not opened for	** ^If the [BLOB handle] passed as the first argument was not opened for
** writing (the flags parameter to [sqlite3_blob_open()] was zero),	** writing (the flags parameter to [sqlite3_blob_open()] was zero),
** this function returns [SQLITE_READONLY].	** this function returns [SQLITE_READONLY].
**	**
** ^This function may only modify the contents of the BLOB; it is	** This function may only modify the contents of the BLOB; it is
** not possible to increase the size of a BLOB using this API.	** not possible to increase the size of a BLOB using this API.
** ^If offset iOffset is less than N bytes from the end of the BLOB,	** ^If offset iOffset is less than N bytes from the end of the BLOB,
** [SQLITE_ERROR] is returned and no data is written. ^If N is	** [SQLITE_ERROR] is returned and no data is written. The size of the
** less than zero [SQLITE_ERROR] is returned and no data is written.	** BLOB (and hence the maximum value of N+iOffset) can be determined
** The size of the BLOB (and hence the maximum value of N+iOffset)	** using the [sqlite3_blob_bytes()] interface. ^If N or iOffset are less
** can be determined using the [sqlite3_blob_bytes()] interface.	** than zero [SQLITE_ERROR] is returned and no data is written.
**	**
** ^An attempt to write to an expired [BLOB handle] fails with an	** ^An attempt to write to an expired [BLOB handle] fails with an
** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred	** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred
Line 5541 SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void	Line 6306 SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void
** have been overwritten by the statement that expired the BLOB handle	** have been overwritten by the statement that expired the BLOB handle
** or by other independent statements.	** or by other independent statements.
**	**
** ^(On success, sqlite3_blob_write() returns SQLITE_OK.
** Otherwise, an [error code] or an [extended error code] is returned.)^
**
** This routine only works on a [BLOB handle] which has been created	** This routine only works on a [BLOB handle] which has been created
** by a prior successful call to [sqlite3_blob_open()] and which has not	** by a prior successful call to [sqlite3_blob_open()] and which has not
** been closed by [sqlite3_blob_close()]. Passing any other pointer in	** been closed by [sqlite3_blob_close()]. Passing any other pointer in
Line 5596 SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);	Line 6358 SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
**	**
** The SQLite source code contains multiple implementations	** The SQLite source code contains multiple implementations
** of these mutex routines. An appropriate implementation	** of these mutex routines. An appropriate implementation
** is selected automatically at compile-time. ^(The following	** is selected automatically at compile-time. The following
** implementations are available in the SQLite core:	** implementations are available in the SQLite core:
**	**
** <ul>	** <ul>
** <li> SQLITE_MUTEX_PTHREADS	** <li> SQLITE_MUTEX_PTHREADS
** <li> SQLITE_MUTEX_W32	** <li> SQLITE_MUTEX_W32
** <li> SQLITE_MUTEX_NOOP	** <li> SQLITE_MUTEX_NOOP
** </ul>)^	** </ul>
**	**
** ^The SQLITE_MUTEX_NOOP implementation is a set of routines	** The SQLITE_MUTEX_NOOP implementation is a set of routines
** that does no real locking and is appropriate for use in	** that does no real locking and is appropriate for use in
** a single-threaded application. ^The SQLITE_MUTEX_PTHREADS and	** a single-threaded application. The SQLITE_MUTEX_PTHREADS and
** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix	** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix
** and Windows.	** and Windows.
**	**
** ^(If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor	** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex	** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex
** implementation is included with the library. In this case the	** implementation is included with the library. In this case the
** application must supply a custom mutex implementation using the	** application must supply a custom mutex implementation using the
** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function	** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function
** before calling sqlite3_initialize() or any other public sqlite3_	** before calling sqlite3_initialize() or any other public sqlite3_
** function that calls sqlite3_initialize().)^	** function that calls sqlite3_initialize().
**	**
** ^The sqlite3_mutex_alloc() routine allocates a new	** ^The sqlite3_mutex_alloc() routine allocates a new
** mutex and returns a pointer to it. ^If it returns NULL	** mutex and returns a pointer to it. ^The sqlite3_mutex_alloc()
** that means that a mutex could not be allocated. ^SQLite	** routine returns NULL if it is unable to allocate the requested
** will unwind its stack and return an error. ^(The argument	** mutex. The argument to sqlite3_mutex_alloc() must one of these
** to sqlite3_mutex_alloc() is one of these integer constants:	** integer constants:
**	**
** <ul>	** <ul>
** <li> SQLITE_MUTEX_FAST	** <li> SQLITE_MUTEX_FAST
** <li> SQLITE_MUTEX_RECURSIVE	** <li> SQLITE_MUTEX_RECURSIVE
** <li> SQLITE_MUTEX_STATIC_MASTER	** <li> SQLITE_MUTEX_STATIC_MASTER
** <li> SQLITE_MUTEX_STATIC_MEM	** <li> SQLITE_MUTEX_STATIC_MEM
** <li> SQLITE_MUTEX_STATIC_MEM2	** <li> SQLITE_MUTEX_STATIC_OPEN
** <li> SQLITE_MUTEX_STATIC_PRNG	** <li> SQLITE_MUTEX_STATIC_PRNG
** <li> SQLITE_MUTEX_STATIC_LRU	** <li> SQLITE_MUTEX_STATIC_LRU
** <li> SQLITE_MUTEX_STATIC_LRU2	** <li> SQLITE_MUTEX_STATIC_PMEM
** </ul>)^	** <li> SQLITE_MUTEX_STATIC_APP1
	** <li> SQLITE_MUTEX_STATIC_APP2
	** <li> SQLITE_MUTEX_STATIC_APP3
	** <li> SQLITE_MUTEX_STATIC_VFS1
	** <li> SQLITE_MUTEX_STATIC_VFS2
	** <li> SQLITE_MUTEX_STATIC_VFS3
	** </ul>
**	**
** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)	** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
** cause sqlite3_mutex_alloc() to create	** cause sqlite3_mutex_alloc() to create
Line 5642 SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);	Line 6410 SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
** is used but not necessarily so when SQLITE_MUTEX_FAST is used.	** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
** The mutex implementation does not need to make a distinction	** The mutex implementation does not need to make a distinction
** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does	** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
** not want to. ^SQLite will only request a recursive mutex in	** not want to. SQLite will only request a recursive mutex in
** cases where it really needs one. ^If a faster non-recursive mutex	** cases where it really needs one. If a faster non-recursive mutex
** implementation is available on the host platform, the mutex subsystem	** implementation is available on the host platform, the mutex subsystem
** might return such a mutex in response to SQLITE_MUTEX_FAST.	** might return such a mutex in response to SQLITE_MUTEX_FAST.
**	**
** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other	** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other
** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return	** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return
** a pointer to a static preexisting mutex. ^Six static mutexes are	** a pointer to a static preexisting mutex. ^Nine static mutexes are
** used by the current version of SQLite. Future versions of SQLite	** used by the current version of SQLite. Future versions of SQLite
** may add additional static mutexes. Static mutexes are for internal	** may add additional static mutexes. Static mutexes are for internal
** use by SQLite only. Applications that use SQLite mutexes should	** use by SQLite only. Applications that use SQLite mutexes should
Line 5658 SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);	Line 6426 SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
**	**
** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST	** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()	** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
** returns a different mutex on every call. ^But for the static	** returns a different mutex on every call. ^For the static
** mutex types, the same mutex is returned on every call that has	** mutex types, the same mutex is returned on every call that has
** the same type number.	** the same type number.
**	**
** ^The sqlite3_mutex_free() routine deallocates a previously	** ^The sqlite3_mutex_free() routine deallocates a previously
** allocated dynamic mutex. ^SQLite is careful to deallocate every	** allocated dynamic mutex. Attempting to deallocate a static
** dynamic mutex that it allocates. The dynamic mutexes must not be in	** mutex results in undefined behavior.
** use when they are deallocated. Attempting to deallocate a static
** mutex results in undefined behavior. ^SQLite never deallocates
** a static mutex.
**	**
** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt	** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
** to enter a mutex. ^If another thread is already within the mutex,	** to enter a mutex. ^If another thread is already within the mutex,
Line 5675 SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);	Line 6440 SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK]	** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK]
** upon successful entry. ^(Mutexes created using	** upon successful entry. ^(Mutexes created using
** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread.	** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread.
** In such cases the,	** In such cases, the
** mutex must be exited an equal number of times before another thread	** mutex must be exited an equal number of times before another thread
** can enter.)^ ^(If the same thread tries to enter any other	** can enter.)^ If the same thread tries to enter any mutex other
** kind of mutex more than once, the behavior is undefined.	** than an SQLITE_MUTEX_RECURSIVE more than once, the behavior is undefined.
** SQLite will never exhibit
** such behavior in its own use of mutexes.)^
**	**
** ^(Some systems (for example, Windows 95) do not support the operation	** ^(Some systems (for example, Windows 95) do not support the operation
** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try()	** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try()
** will always return SQLITE_BUSY. The SQLite core only ever uses	** will always return SQLITE_BUSY. The SQLite core only ever uses
** sqlite3_mutex_try() as an optimization so this is acceptable behavior.)^	** sqlite3_mutex_try() as an optimization so this is acceptable
	** behavior.)^
**	**
** ^The sqlite3_mutex_leave() routine exits a mutex that was	** ^The sqlite3_mutex_leave() routine exits a mutex that was
** previously entered by the same thread. ^(The behavior	** previously entered by the same thread. The behavior
** is undefined if the mutex is not currently entered by the	** is undefined if the mutex is not currently entered by the
** calling thread or is not currently allocated. SQLite will	** calling thread or is not currently allocated.
** never do either.)^
**	**
** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or	** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
** sqlite3_mutex_leave() is a NULL pointer, then all three routines	** sqlite3_mutex_leave() is a NULL pointer, then all three routines
Line 5712 SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);	Line 6475 SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
** used to allocate and use mutexes.	** used to allocate and use mutexes.
**	**
** Usually, the default mutex implementations provided by SQLite are	** Usually, the default mutex implementations provided by SQLite are
** sufficient, however the user has the option of substituting a custom	** sufficient, however the application has the option of substituting a custom
** implementation for specialized deployments or systems for which SQLite	** implementation for specialized deployments or systems for which SQLite
** does not provide a suitable implementation. In this case, the user	** does not provide a suitable implementation. In this case, the application
** creates and populates an instance of this structure to pass	** creates and populates an instance of this structure to pass
** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option.	** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option.
** Additionally, an instance of this structure can be used as an	** Additionally, an instance of this structure can be used as an
Line 5755 SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);	Line 6518 SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
** (i.e. it is acceptable to provide an implementation that segfaults if	** (i.e. it is acceptable to provide an implementation that segfaults if
** it is passed a NULL pointer).	** it is passed a NULL pointer).
**	**
** The xMutexInit() method must be threadsafe. ^It must be harmless to	** The xMutexInit() method must be threadsafe. It must be harmless to
** invoke xMutexInit() multiple times within the same process and without	** invoke xMutexInit() multiple times within the same process and without
** intervening calls to xMutexEnd(). Second and subsequent calls to	** intervening calls to xMutexEnd(). Second and subsequent calls to
** xMutexInit() must be no-ops.	** xMutexInit() must be no-ops.
**	**
** ^xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()]	** xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()]
** and its associates). ^Similarly, xMutexAlloc() must not use SQLite memory	** and its associates). Similarly, xMutexAlloc() must not use SQLite memory
** allocation for a static mutex. ^However xMutexAlloc() may use SQLite	** allocation for a static mutex. ^However xMutexAlloc() may use SQLite
** memory allocation for a fast or recursive mutex.	** memory allocation for a fast or recursive mutex.
**	**
Line 5787 struct sqlite3_mutex_methods {	Line 6550 struct sqlite3_mutex_methods {
** CAPI3REF: Mutex Verification Routines	** CAPI3REF: Mutex Verification Routines
**	**
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines	** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines
** are intended for use inside assert() statements. ^The SQLite core	** are intended for use inside assert() statements. The SQLite core
** never uses these routines except inside an assert() and applications	** never uses these routines except inside an assert() and applications
** are advised to follow the lead of the core. ^The SQLite core only	** are advised to follow the lead of the core. The SQLite core only
** provides implementations for these routines when it is compiled	** provides implementations for these routines when it is compiled
** with the SQLITE_DEBUG flag. ^External mutex implementations	** with the SQLITE_DEBUG flag. External mutex implementations
** are only required to provide these routines if SQLITE_DEBUG is	** are only required to provide these routines if SQLITE_DEBUG is
** defined and if NDEBUG is not defined.	** defined and if NDEBUG is not defined.
**	**
** ^These routines should return true if the mutex in their argument	** These routines should return true if the mutex in their argument
** is held or not held, respectively, by the calling thread.	** is held or not held, respectively, by the calling thread.
**	**
** ^The implementation is not required to provide versions of these	** The implementation is not required to provide versions of these
** routines that actually work. If the implementation does not provide working	** routines that actually work. If the implementation does not provide working
** versions of these routines, it should at least provide stubs that always	** versions of these routines, it should at least provide stubs that always
** return true so that one does not get spurious assertion failures.	** return true so that one does not get spurious assertion failures.
**	**
** ^If the argument to sqlite3_mutex_held() is a NULL pointer then	** If the argument to sqlite3_mutex_held() is a NULL pointer then
** the routine should return 1. This seems counter-intuitive since	** the routine should return 1. This seems counter-intuitive since
** clearly the mutex cannot be held if it does not exist. But	** clearly the mutex cannot be held if it does not exist. But
** the reason the mutex does not exist is because the build is not	** the reason the mutex does not exist is because the build is not
** using mutexes. And we do not want the assert() containing the	** using mutexes. And we do not want the assert() containing the
** call to sqlite3_mutex_held() to fail, so a non-zero return is	** call to sqlite3_mutex_held() to fail, so a non-zero return is
** the appropriate thing to do. ^The sqlite3_mutex_notheld()	** the appropriate thing to do. The sqlite3_mutex_notheld()
** interface should also return 1 when given a NULL pointer.	** interface should also return 1 when given a NULL pointer.
*/	*/
#ifndef NDEBUG	#ifndef NDEBUG
Line 5837 SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);	Line 6600 SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */	#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */
#define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */	#define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */
#define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */	#define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */
	#define SQLITE_MUTEX_STATIC_APP1 8 /* For use by application */
	#define SQLITE_MUTEX_STATIC_APP2 9 /* For use by application */
	#define SQLITE_MUTEX_STATIC_APP3 10 /* For use by application */
	#define SQLITE_MUTEX_STATIC_VFS1 11 /* For use by built-in VFS */
	#define SQLITE_MUTEX_STATIC_VFS2 12 /* For use by extension VFS */
	#define SQLITE_MUTEX_STATIC_VFS3 13 /* For use by application VFS */

/*	/*
** CAPI3REF: Retrieve the mutex for a database connection	** CAPI3REF: Retrieve the mutex for a database connection
	** METHOD: sqlite3
**	**
** ^This interface returns a pointer the [sqlite3_mutex] object that	** ^This interface returns a pointer the [sqlite3_mutex] object that
** serializes access to the [database connection] given in the argument	** serializes access to the [database connection] given in the argument
Line 5851 SQLITE_API sqlite3_mutex sqlite3_db_mutex(sqlite3);	Line 6621 SQLITE_API sqlite3_mutex sqlite3_db_mutex(sqlite3);

/*	/*
** CAPI3REF: Low-Level Control Of Database Files	** CAPI3REF: Low-Level Control Of Database Files
	** METHOD: sqlite3
**	**
** ^The [sqlite3_file_control()] interface makes a direct call to the	** ^The [sqlite3_file_control()] interface makes a direct call to the
** xFileControl method for the [sqlite3_io_methods] object associated	** xFileControl method for the [sqlite3_io_methods] object associated
Line 5928 SQLITE_API int sqlite3_test_control(int op, ...);	Line 6699 SQLITE_API int sqlite3_test_control(int op, ...);
#define SQLITE_TESTCTRL_ISKEYWORD 16	#define SQLITE_TESTCTRL_ISKEYWORD 16
#define SQLITE_TESTCTRL_SCRATCHMALLOC 17	#define SQLITE_TESTCTRL_SCRATCHMALLOC 17
#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18	#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18
#define SQLITE_TESTCTRL_EXPLAIN_STMT 19	#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */
#define SQLITE_TESTCTRL_LAST 19	#define SQLITE_TESTCTRL_NEVER_CORRUPT 20
	#define SQLITE_TESTCTRL_VDBE_COVERAGE 21
	#define SQLITE_TESTCTRL_BYTEORDER 22
	#define SQLITE_TESTCTRL_ISINIT 23
	#define SQLITE_TESTCTRL_SORTER_MMAP 24
	#define SQLITE_TESTCTRL_IMPOSTER 25
	#define SQLITE_TESTCTRL_LAST 25

/*	/*
** CAPI3REF: SQLite Runtime Status	** CAPI3REF: SQLite Runtime Status
**	**
** ^This interface is used to retrieve runtime status information	** ^These interfaces are used to retrieve runtime status information
** about the performance of SQLite, and optionally to reset various	** about the performance of SQLite, and optionally to reset various
** highwater marks. ^The first argument is an integer code for	** highwater marks. ^The first argument is an integer code for
** the specific parameter to measure. ^(Recognized integer codes	** the specific parameter to measure. ^(Recognized integer codes
Line 5948 SQLITE_API int sqlite3_test_control(int op, ...);	Line 6725 SQLITE_API int sqlite3_test_control(int op, ...);
** ^(Other parameters record only the highwater mark and not the current	** ^(Other parameters record only the highwater mark and not the current
** value. For these latter parameters nothing is written into *pCurrent.)^	** value. For these latter parameters nothing is written into *pCurrent.)^
**	**
** ^The sqlite3_status() routine returns SQLITE_OK on success and a	** ^The sqlite3_status() and sqlite3_status64() routines return
** non-zero [error code] on failure.	** SQLITE_OK on success and a non-zero [error code] on failure.
**	**
** This routine is threadsafe but is not atomic. This routine can be	** If either the current value or the highwater mark is too large to
** called while other threads are running the same or different SQLite	** be represented by a 32-bit integer, then the values returned by
** interfaces. However the values returned in *pCurrent and	** sqlite3_status() are undefined.
** *pHighwater reflect the status of SQLite at different points in time
** and it is possible that another thread might change the parameter
** in between the times when pCurrent and pHighwater are written.
**	**
** See also: [sqlite3_db_status()]	** See also: [sqlite3_db_status()]
*/	*/
SQLITE_API int sqlite3_status(int op, int pCurrent, int pHighwater, int resetFlag);	SQLITE_API int sqlite3_status(int op, int pCurrent, int pHighwater, int resetFlag);
	SQLITE_API int sqlite3_status64(
	int op,
	sqlite3_int64 *pCurrent,
	sqlite3_int64 *pHighwater,
	int resetFlag
	);


/*	/*
Line 6039 SQLITE_API int sqlite3_status(int op, int *pCurrent, i	Line 6819 SQLITE_API int sqlite3_status(int op, int *pCurrent, i
** The value written into the *pCurrent parameter is undefined.</dd>)^	** The value written into the *pCurrent parameter is undefined.</dd>)^
**	**
** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>	** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
** <dd>This parameter records the deepest parser stack. It is only	** <dd>The *pHighwater parameter records the deepest parser stack.
	** The pCurrent value is undefined. The pHighwater value is only
** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^	** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
** </dl>	** </dl>
**	**
Line 6058 SQLITE_API int sqlite3_status(int op, int *pCurrent, i	Line 6839 SQLITE_API int sqlite3_status(int op, int *pCurrent, i

/*	/*
** CAPI3REF: Database Connection Status	** CAPI3REF: Database Connection Status
	** METHOD: sqlite3
**	**
** ^This interface is used to retrieve runtime status information	** ^This interface is used to retrieve runtime status information
** about a single [database connection]. ^The first argument is the	** about a single [database connection]. ^The first argument is the
Line 6120 SQLITE_API int sqlite3_db_status(sqlite3*, int op, int	Line 6902 SQLITE_API int sqlite3_db_status(sqlite3*, int op, int
** the current value is always zero.)^	** the current value is always zero.)^
**	**
** [[SQLITE_DBSTATUS_CACHE_USED]] ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt>	** [[SQLITE_DBSTATUS_CACHE_USED]] ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt>
** <dd>This parameter returns the approximate number of of bytes of heap	** <dd>This parameter returns the approximate number of bytes of heap
** memory used by all pager caches associated with the database connection.)^	** memory used by all pager caches associated with the database connection.)^
** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.	** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
**	**
	** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]]
	** ^(<dt>SQLITE_DBSTATUS_CACHE_USED_SHARED</dt>
	** <dd>This parameter is similar to DBSTATUS_CACHE_USED, except that if a
	** pager cache is shared between two or more connections the bytes of heap
	** memory used by that pager cache is divided evenly between the attached
	** connections.)^ In other words, if none of the pager caches associated
	** with the database connection are shared, this request returns the same
	** value as DBSTATUS_CACHE_USED. Or, if one or more or the pager caches are
	** shared, the value returned by this call will be smaller than that returned
	** by DBSTATUS_CACHE_USED. ^The highwater mark associated with
	** SQLITE_DBSTATUS_CACHE_USED_SHARED is always 0.
	**
** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>	** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
** <dd>This parameter returns the approximate number of of bytes of heap	** <dd>This parameter returns the approximate number of bytes of heap
** memory used to store the schema for all databases associated	** memory used to store the schema for all databases associated
** with the connection - main, temp, and any [ATTACH]-ed databases.)^	** with the connection - main, temp, and any [ATTACH]-ed databases.)^
** ^The full amount of memory used by the schemas is reported, even if the	** ^The full amount of memory used by the schemas is reported, even if the
Line 6134 SQLITE_API int sqlite3_db_status(sqlite3*, int op, int	Line 6928 SQLITE_API int sqlite3_db_status(sqlite3*, int op, int
** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0.	** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0.
**	**
** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>	** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>
** <dd>This parameter returns the approximate number of of bytes of heap	** <dd>This parameter returns the approximate number of bytes of heap
** and lookaside memory used by all prepared statements associated with	** and lookaside memory used by all prepared statements associated with
** the database connection.)^	** the database connection.)^
** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0.	** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0.
Line 6162 SQLITE_API int sqlite3_db_status(sqlite3*, int op, int	Line 6956 SQLITE_API int sqlite3_db_status(sqlite3*, int op, int
** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The	** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The
** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.	** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.
** </dd>	** </dd>
	**
	** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt>
	** <dd>This parameter returns zero for the current value if and only if
	** all foreign key constraints (deferred or immediate) have been
	** resolved.)^ ^The highwater mark is always 0.
	** </dd>
** </dl>	** </dl>
*/	*/
#define SQLITE_DBSTATUS_LOOKASIDE_USED 0	#define SQLITE_DBSTATUS_LOOKASIDE_USED 0
Line 6174 SQLITE_API int sqlite3_db_status(sqlite3*, int op, int	Line 6974 SQLITE_API int sqlite3_db_status(sqlite3*, int op, int
#define SQLITE_DBSTATUS_CACHE_HIT 7	#define SQLITE_DBSTATUS_CACHE_HIT 7
#define SQLITE_DBSTATUS_CACHE_MISS 8	#define SQLITE_DBSTATUS_CACHE_MISS 8
#define SQLITE_DBSTATUS_CACHE_WRITE 9	#define SQLITE_DBSTATUS_CACHE_WRITE 9
#define SQLITE_DBSTATUS_MAX 9 /* Largest defined DBSTATUS */	#define SQLITE_DBSTATUS_DEFERRED_FKS 10
	#define SQLITE_DBSTATUS_CACHE_USED_SHARED 11
	#define SQLITE_DBSTATUS_MAX 11 /* Largest defined DBSTATUS */


/*	/*
** CAPI3REF: Prepared Statement Status	** CAPI3REF: Prepared Statement Status
	** METHOD: sqlite3_stmt
**	**
** ^(Each prepared statement maintains various	** ^(Each prepared statement maintains various
** [SQLITE_STMTSTATUS counters] that measure the number	** [SQLITE_STMTSTATUS counters] that measure the number
Line 6228 SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int	Line 7031 SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int
** A non-zero value in this counter may indicate an opportunity to	** A non-zero value in this counter may indicate an opportunity to
** improvement performance by adding permanent indices that do not	** improvement performance by adding permanent indices that do not
** need to be reinitialized each time the statement is run.</dd>	** need to be reinitialized each time the statement is run.</dd>
	**
	** [[SQLITE_STMTSTATUS_VM_STEP]] <dt>SQLITE_STMTSTATUS_VM_STEP</dt>
	** <dd>^This is the number of virtual machine operations executed
	** by the prepared statement if that number is less than or equal
	** to 2147483647. The number of virtual machine operations can be
	** used as a proxy for the total work done by the prepared statement.
	** If the number of virtual machine operations exceeds 2147483647
	** then the value returned by this statement status code is undefined.
	** </dd>
** </dl>	** </dl>
*/	*/
#define SQLITE_STMTSTATUS_FULLSCAN_STEP 1	#define SQLITE_STMTSTATUS_FULLSCAN_STEP 1
#define SQLITE_STMTSTATUS_SORT 2	#define SQLITE_STMTSTATUS_SORT 2
#define SQLITE_STMTSTATUS_AUTOINDEX 3	#define SQLITE_STMTSTATUS_AUTOINDEX 3
	#define SQLITE_STMTSTATUS_VM_STEP 4

/*	/*
** CAPI3REF: Custom Page Cache Object	** CAPI3REF: Custom Page Cache Object
Line 6369 struct sqlite3_pcache_page {	Line 7182 struct sqlite3_pcache_page {
** parameter to help it determined what action to take:	** parameter to help it determined what action to take:
**	**
** <table border=1 width=85% align=center>	** <table border=1 width=85% align=center>
** <tr><th> createFlag <th> Behaviour when page is not already in cache	** <tr><th> createFlag <th> Behavior when page is not already in cache
** <tr><td> 0 <td> Do not allocate a new page. Return NULL.	** <tr><td> 0 <td> Do not allocate a new page. Return NULL.
** <tr><td> 1 <td> Allocate a new page if it easy and convenient to do so.	** <tr><td> 1 <td> Allocate a new page if it easy and convenient to do so.
** Otherwise return NULL.	** Otherwise return NULL.
Line 6517 typedef struct sqlite3_backup sqlite3_backup;	Line 7330 typedef struct sqlite3_backup sqlite3_backup;
** must be different or else sqlite3_backup_init(D,N,S,M) will fail with	** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
** an error.	** an error.
**	**
	** ^A call to sqlite3_backup_init() will fail, returning NULL, if
	** there is already a read or read-write transaction open on the
	** destination database.
	**
** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is	** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is
** returned and an error code and error message are stored in the	** returned and an error code and error message are stored in the
** destination [database connection] D.	** destination [database connection] D.
Line 6609 typedef struct sqlite3_backup sqlite3_backup;	Line 7426 typedef struct sqlite3_backup sqlite3_backup;
** is not a permanent error and does not affect the return value of	** is not a permanent error and does not affect the return value of
** sqlite3_backup_finish().	** sqlite3_backup_finish().
**	**
** [[sqlite3_backup__remaining()]] [[sqlite3_backup_pagecount()]]	** [[sqlite3_backup_remaining()]] [[sqlite3_backup_pagecount()]]
** <b>sqlite3_backup_remaining() and sqlite3_backup_pagecount()</b>	** <b>sqlite3_backup_remaining() and sqlite3_backup_pagecount()</b>
**	**
** ^Each call to sqlite3_backup_step() sets two values inside	** ^The sqlite3_backup_remaining() routine returns the number of pages still
** the [sqlite3_backup] object: the number of pages still to be backed	** to be backed up at the conclusion of the most recent sqlite3_backup_step().
** up and the total number of pages in the source database file.	** ^The sqlite3_backup_pagecount() routine returns the total number of pages
** The sqlite3_backup_remaining() and sqlite3_backup_pagecount() interfaces	** in the source database at the conclusion of the most recent
** retrieve these two values, respectively.	** sqlite3_backup_step().
	** ^(The values returned by these functions are only updated by
	** sqlite3_backup_step(). If the source database is modified in a way that
	** changes the size of the source database or the number of pages remaining,
	** those changes are not reflected in the output of sqlite3_backup_pagecount()
	** and sqlite3_backup_remaining() until after the next
	** sqlite3_backup_step().)^
**	**
** ^The values returned by these functions are only updated by
** sqlite3_backup_step(). ^If the source database is modified during a backup
** operation, then the values are not updated to account for any extra
** pages that need to be updated or the size of the source database file
** changing.
**
** <b>Concurrent Usage of Database Handles</b>	** <b>Concurrent Usage of Database Handles</b>
**	**
** ^The source [database connection] may be used by the application for other	** ^The source [database connection] may be used by the application for other
Line 6668 SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup	Line 7485 SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup

/*	/*
** CAPI3REF: Unlock Notification	** CAPI3REF: Unlock Notification
	** METHOD: sqlite3
**	**
** ^When running in shared-cache mode, a database operation may fail with	** ^When running in shared-cache mode, a database operation may fail with
** an [SQLITE_LOCKED] error if the required locks on the shared-cache or	** an [SQLITE_LOCKED] error if the required locks on the shared-cache or
Line 6799 SQLITE_API int sqlite3_stricmp(const char *, const cha	Line 7617 SQLITE_API int sqlite3_stricmp(const char *, const cha
SQLITE_API int sqlite3_strnicmp(const char , const char , int);	SQLITE_API int sqlite3_strnicmp(const char , const char , int);

/*	/*
	** CAPI3REF: String Globbing
	*
	** ^The [sqlite3_strglob(P,X)] interface returns zero if and only if
	** string X matches the [GLOB] pattern P.
	** ^The definition of [GLOB] pattern matching used in
	** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
	** SQL dialect understood by SQLite. ^The [sqlite3_strglob(P,X)] function
	** is case sensitive.
	**
	** Note that this routine returns zero on a match and non-zero if the strings
	** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
	**
	** See also: [sqlite3_strlike()].
	*/
	SQLITE_API int sqlite3_strglob(const char zGlob, const char zStr);

	/*
	** CAPI3REF: String LIKE Matching
	*
	** ^The [sqlite3_strlike(P,X,E)] interface returns zero if and only if
	** string X matches the [LIKE] pattern P with escape character E.
	** ^The definition of [LIKE] pattern matching used in
	** [sqlite3_strlike(P,X,E)] is the same as for the "X LIKE P ESCAPE E"
	** operator in the SQL dialect understood by SQLite. ^For "X LIKE P" without
	** the ESCAPE clause, set the E parameter of [sqlite3_strlike(P,X,E)] to 0.
	** ^As with the LIKE operator, the [sqlite3_strlike(P,X,E)] function is case
	** insensitive - equivalent upper and lower case ASCII characters match
	** one another.
	**
	** ^The [sqlite3_strlike(P,X,E)] function matches Unicode characters, though
	** only ASCII characters are case folded.
	**
	** Note that this routine returns zero on a match and non-zero if the strings
	** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
	**
	** See also: [sqlite3_strglob()].
	*/
	SQLITE_API int sqlite3_strlike(const char zGlob, const char zStr, unsigned int cEsc);

	/*
** CAPI3REF: Error Logging Interface	** CAPI3REF: Error Logging Interface
**	**
** ^The [sqlite3_log()] interface writes a message into the error log	** ^The [sqlite3_log()] interface writes a message into the [error log]
** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].	** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].
** ^If logging is enabled, the zFormat string and subsequent arguments are	** ^If logging is enabled, the zFormat string and subsequent arguments are
** used with [sqlite3_snprintf()] to generate the final output string.	** used with [sqlite3_snprintf()] to generate the final output string.
Line 6823 SQLITE_API void sqlite3_log(int iErrCode, const char *	Line 7681 SQLITE_API void sqlite3_log(int iErrCode, const char *

/*	/*
** CAPI3REF: Write-Ahead Log Commit Hook	** CAPI3REF: Write-Ahead Log Commit Hook
	** METHOD: sqlite3
**	**
** ^The [sqlite3_wal_hook()] function is used to register a callback that	** ^The [sqlite3_wal_hook()] function is used to register a callback that
** will be invoked each time a database connection commits data to a	** is invoked each time data is committed to a database in wal mode.
** [write-ahead log] (i.e. whenever a transaction is committed in
** [journal_mode \| journal_mode=WAL mode]).
**	**
** ^The callback is invoked by SQLite after the commit has taken place and	** ^(The callback is invoked by SQLite after the commit has taken place and
** the associated write-lock on the database released, so the implementation	** the associated write-lock on the database released)^, so the implementation
** may read, write or [checkpoint] the database as required.	** may read, write or [checkpoint] the database as required.
**	**
** ^The first parameter passed to the callback function when it is invoked	** ^The first parameter passed to the callback function when it is invoked
Line 6854 SQLITE_API void sqlite3_log(int iErrCode, const char *	Line 7711 SQLITE_API void sqlite3_log(int iErrCode, const char *
** previously registered write-ahead log callback. ^Note that the	** previously registered write-ahead log callback. ^Note that the
** [sqlite3_wal_autocheckpoint()] interface and the	** [sqlite3_wal_autocheckpoint()] interface and the
** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will	** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
** those overwrite any prior [sqlite3_wal_hook()] settings.	** overwrite any prior [sqlite3_wal_hook()] settings.
*/	*/
SQLITE_API void *sqlite3_wal_hook(	SQLITE_API void *sqlite3_wal_hook(
sqlite3*,	sqlite3*,
Line 6864 SQLITE_API void *sqlite3_wal_hook(	Line 7721 SQLITE_API void *sqlite3_wal_hook(

/*	/*
** CAPI3REF: Configure an auto-checkpoint	** CAPI3REF: Configure an auto-checkpoint
	** METHOD: sqlite3
**	**
** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around	** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around
** [sqlite3_wal_hook()] that causes any database on [database connection] D	** [sqlite3_wal_hook()] that causes any database on [database connection] D
Line 6881 SQLITE_API void *sqlite3_wal_hook(	Line 7739 SQLITE_API void *sqlite3_wal_hook(
** ^The [wal_autocheckpoint pragma] can be used to invoke this interface	** ^The [wal_autocheckpoint pragma] can be used to invoke this interface
** from SQL.	** from SQL.
**	**
	** ^Checkpoints initiated by this mechanism are
	** [sqlite3_wal_checkpoint_v2\|PASSIVE].
	**
** ^Every new [database connection] defaults to having the auto-checkpoint	** ^Every new [database connection] defaults to having the auto-checkpoint
** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]	** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]
** pages. The use of this interface	** pages. The use of this interface
Line 6891 SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db,	Line 7752 SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db,

/*	/*
** CAPI3REF: Checkpoint a database	** CAPI3REF: Checkpoint a database
	** METHOD: sqlite3
**	**
** ^The [sqlite3_wal_checkpoint(D,X)] interface causes database named X	** ^(The sqlite3_wal_checkpoint(D,X) is equivalent to
** on [database connection] D to be [checkpointed]. ^If X is NULL or an	** [sqlite3_wal_checkpoint_v2](D,X,[SQLITE_CHECKPOINT_PASSIVE],0,0).)^
** empty string, then a checkpoint is run on all databases of
** connection D. ^If the database connection D is not in
** [WAL \| write-ahead log mode] then this interface is a harmless no-op.
**	**
** ^The [wal_checkpoint pragma] can be used to invoke this interface	** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the
** from SQL. ^The [sqlite3_wal_autocheckpoint()] interface and the	** [write-ahead log] for database X on [database connection] D to be
** [wal_autocheckpoint pragma] can be used to cause this interface to be	** transferred into the database file and for the write-ahead log to
** run whenever the WAL reaches a certain size threshold.	** be reset. See the [checkpointing] documentation for addition
	** information.
**	**
** See also: [sqlite3_wal_checkpoint_v2()]	** This interface used to be the only way to cause a checkpoint to
	** occur. But then the newer and more powerful [sqlite3_wal_checkpoint_v2()]
	** interface was added. This interface is retained for backwards
	** compatibility and as a convenience for applications that need to manually
	** start a callback but which do not need the full power (and corresponding
	** complication) of [sqlite3_wal_checkpoint_v2()].
*/	*/
SQLITE_API int sqlite3_wal_checkpoint(sqlite3 db, const char zDb);	SQLITE_API int sqlite3_wal_checkpoint(sqlite3 db, const char zDb);

/*	/*
** CAPI3REF: Checkpoint a database	** CAPI3REF: Checkpoint a database
	** METHOD: sqlite3
**	**
** Run a checkpoint operation on WAL database zDb attached to database	** ^(The sqlite3_wal_checkpoint_v2(D,X,M,L,C) interface runs a checkpoint
** handle db. The specific operation is determined by the value of the	** operation on database X of [database connection] D in mode M. Status
** eMode parameter:	** information is written back into integers pointed to by L and C.)^
	** ^(The M parameter must be a valid [checkpoint mode]:)^
**	**
** <dl>	** <dl>
** <dt>SQLITE_CHECKPOINT_PASSIVE<dd>	** <dt>SQLITE_CHECKPOINT_PASSIVE<dd>
** Checkpoint as many frames as possible without waiting for any database	** ^Checkpoint as many frames as possible without waiting for any database
** readers or writers to finish. Sync the db file if all frames in the log	** readers or writers to finish, then sync the database file if all frames
** are checkpointed. This mode is the same as calling	** in the log were checkpointed. ^The [busy-handler callback]
** sqlite3_wal_checkpoint(). The busy-handler callback is never invoked.	** is never invoked in the SQLITE_CHECKPOINT_PASSIVE mode.
	** ^On the other hand, passive mode might leave the checkpoint unfinished
	** if there are concurrent readers or writers.
**	**
** <dt>SQLITE_CHECKPOINT_FULL<dd>	** <dt>SQLITE_CHECKPOINT_FULL<dd>
** This mode blocks (calls the busy-handler callback) until there is no	** ^This mode blocks (it invokes the
	** [sqlite3_busy_handler\|busy-handler callback]) until there is no
** database writer and all readers are reading from the most recent database	** database writer and all readers are reading from the most recent database
** snapshot. It then checkpoints all frames in the log file and syncs the	** snapshot. ^It then checkpoints all frames in the log file and syncs the
** database file. This call blocks database writers while it is running,	** database file. ^This mode blocks new database writers while it is pending,
** but not database readers.	** but new database readers are allowed to continue unimpeded.
**	**
** <dt>SQLITE_CHECKPOINT_RESTART<dd>	** <dt>SQLITE_CHECKPOINT_RESTART<dd>
** This mode works the same way as SQLITE_CHECKPOINT_FULL, except after	** ^This mode works the same way as SQLITE_CHECKPOINT_FULL with the addition
** checkpointing the log file it blocks (calls the busy-handler callback)	** that after checkpointing the log file it blocks (calls the
** until all readers are reading from the database file only. This ensures	** [busy-handler callback])
** that the next client to write to the database file restarts the log file	** until all readers are reading from the database file only. ^This ensures
** from the beginning. This call blocks database writers while it is running,	** that the next writer will restart the log file from the beginning.
** but not database readers.	** ^Like SQLITE_CHECKPOINT_FULL, this mode blocks new
	** database writer attempts while it is pending, but does not impede readers.
	**
	** <dt>SQLITE_CHECKPOINT_TRUNCATE<dd>
	** ^This mode works the same way as SQLITE_CHECKPOINT_RESTART with the
	** addition that it also truncates the log file to zero bytes just prior
	** to a successful return.
** </dl>	** </dl>
**	**
** If pnLog is not NULL, then *pnLog is set to the total number of frames in	** ^If pnLog is not NULL, then *pnLog is set to the total number of frames in
** the log file before returning. If pnCkpt is not NULL, then *pnCkpt is set to	** the log file or to -1 if the checkpoint could not run because
** the total number of checkpointed frames (including any that were already	** of an error or because the database is not in [WAL mode]. ^If pnCkpt is not
** checkpointed when this function is called). pnLog and pnCkpt may be	** NULL,then *pnCkpt is set to the total number of checkpointed frames in the
** populated even if sqlite3_wal_checkpoint_v2() returns other than SQLITE_OK.	** log file (including any that were already checkpointed before the function
** If no values are available because of an error, they are both set to -1	** was called) or to -1 if the checkpoint could not run due to an error or
** before returning to communicate this to the caller.	** because the database is not in WAL mode. ^Note that upon successful
	** completion of an SQLITE_CHECKPOINT_TRUNCATE, the log file will have been
	** truncated to zero bytes and so both pnLog and pnCkpt will be set to zero.
**	**
** All calls obtain an exclusive "checkpoint" lock on the database file. If	** ^All calls obtain an exclusive "checkpoint" lock on the database file. ^If
** any other process is running a checkpoint operation at the same time, the	** any other process is running a checkpoint operation at the same time, the
** lock cannot be obtained and SQLITE_BUSY is returned. Even if there is a	** lock cannot be obtained and SQLITE_BUSY is returned. ^Even if there is a
** busy-handler configured, it will not be invoked in this case.	** busy-handler configured, it will not be invoked in this case.
**	**
** The SQLITE_CHECKPOINT_FULL and RESTART modes also obtain the exclusive	** ^The SQLITE_CHECKPOINT_FULL, RESTART and TRUNCATE modes also obtain the
** "writer" lock on the database file. If the writer lock cannot be obtained	** exclusive "writer" lock on the database file. ^If the writer lock cannot be
** immediately, and a busy-handler is configured, it is invoked and the writer	** obtained immediately, and a busy-handler is configured, it is invoked and
** lock retried until either the busy-handler returns 0 or the lock is	** the writer lock retried until either the busy-handler returns 0 or the lock
** successfully obtained. The busy-handler is also invoked while waiting for	** is successfully obtained. ^The busy-handler is also invoked while waiting for
** database readers as described above. If the busy-handler returns 0 before	** database readers as described above. ^If the busy-handler returns 0 before
** the writer lock is obtained or while waiting for database readers, the	** the writer lock is obtained or while waiting for database readers, the
** checkpoint operation proceeds from that point in the same way as	** checkpoint operation proceeds from that point in the same way as
** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible	** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible
** without blocking any further. SQLITE_BUSY is returned in this case.	** without blocking any further. ^SQLITE_BUSY is returned in this case.
**	**
** If parameter zDb is NULL or points to a zero length string, then the	** ^If parameter zDb is NULL or points to a zero length string, then the
** specified operation is attempted on all WAL databases. In this case the	** specified operation is attempted on all WAL databases [attached] to
** values written to output parameters pnLog and pnCkpt are undefined. If	** [database connection] db. In this case the
	** values written to output parameters pnLog and pnCkpt are undefined. ^If
** an SQLITE_BUSY error is encountered when processing one or more of the	** an SQLITE_BUSY error is encountered when processing one or more of the
** attached WAL databases, the operation is still attempted on any remaining	** attached WAL databases, the operation is still attempted on any remaining
** attached databases and SQLITE_BUSY is returned to the caller. If any other	** attached databases and SQLITE_BUSY is returned at the end. ^If any other
** error occurs while processing an attached database, processing is abandoned	** error occurs while processing an attached database, processing is abandoned
** and the error code returned to the caller immediately. If no error	** and the error code is returned to the caller immediately. ^If no error
** (SQLITE_BUSY or otherwise) is encountered while processing the attached	** (SQLITE_BUSY or otherwise) is encountered while processing the attached
** databases, SQLITE_OK is returned.	** databases, SQLITE_OK is returned.
**	**
** If database zDb is the name of an attached database that is not in WAL	** ^If database zDb is the name of an attached database that is not in WAL
** mode, SQLITE_OK is returned and both pnLog and pnCkpt set to -1. If	** mode, SQLITE_OK is returned and both pnLog and pnCkpt set to -1. ^If
** zDb is not NULL (or a zero length string) and is not the name of any	** zDb is not NULL (or a zero length string) and is not the name of any
** attached database, SQLITE_ERROR is returned to the caller.	** attached database, SQLITE_ERROR is returned to the caller.
	**
	** ^Unless it returns SQLITE_MISUSE,
	** the sqlite3_wal_checkpoint_v2() interface
	** sets the error information that is queried by
	** [sqlite3_errcode()] and [sqlite3_errmsg()].
	**
	** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
	** from SQL.
*/	*/
SQLITE_API int sqlite3_wal_checkpoint_v2(	SQLITE_API int sqlite3_wal_checkpoint_v2(
sqlite3 db, / Database handle */	sqlite3 db, / Database handle */
Line 6986 SQLITE_API int sqlite3_wal_checkpoint_v2(	Line 7873 SQLITE_API int sqlite3_wal_checkpoint_v2(
);	);

/*	/*
** CAPI3REF: Checkpoint operation parameters	** CAPI3REF: Checkpoint Mode Values
	** KEYWORDS: {checkpoint mode}
**	**
** These constants can be used as the 3rd parameter to	** These constants define all valid values for the "checkpoint mode" passed
** [sqlite3_wal_checkpoint_v2()]. See the [sqlite3_wal_checkpoint_v2()]	** as the third parameter to the [sqlite3_wal_checkpoint_v2()] interface.
** documentation for additional information about the meaning and use of	** See the [sqlite3_wal_checkpoint_v2()] documentation for details on the
** each of these values.	** meaning of each of these checkpoint modes.
*/	*/
#define SQLITE_CHECKPOINT_PASSIVE 0	#define SQLITE_CHECKPOINT_PASSIVE 0 /* Do as much as possible w/o blocking */
#define SQLITE_CHECKPOINT_FULL 1	#define SQLITE_CHECKPOINT_FULL 1 /* Wait for writers, then checkpoint */
#define SQLITE_CHECKPOINT_RESTART 2	#define SQLITE_CHECKPOINT_RESTART 2 /* Like FULL but wait for for readers */
	#define SQLITE_CHECKPOINT_TRUNCATE 3 /* Like RESTART but also truncate WAL */

/*	/*
** CAPI3REF: Virtual Table Interface Configuration	** CAPI3REF: Virtual Table Interface Configuration
Line 7068 SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);	Line 7957 SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);

/*	/*
** CAPI3REF: Conflict resolution modes	** CAPI3REF: Conflict resolution modes
	** KEYWORDS: {conflict resolution mode}
**	**
** These constants are returned by [sqlite3_vtab_on_conflict()] to	** These constants are returned by [sqlite3_vtab_on_conflict()] to
** inform a [virtual table] implementation what the [ON CONFLICT] mode	** inform a [virtual table] implementation what the [ON CONFLICT] mode
Line 7083 SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);	Line 7973 SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
/* #define SQLITE_ABORT 4 // Also an error code */	/* #define SQLITE_ABORT 4 // Also an error code */
#define SQLITE_REPLACE 5	#define SQLITE_REPLACE 5

	/*
	** CAPI3REF: Prepared Statement Scan Status Opcodes
	** KEYWORDS: {scanstatus options}
	**
	** The following constants can be used for the T parameter to the
	** [sqlite3_stmt_scanstatus(S,X,T,V)] interface. Each constant designates a
	** different metric for sqlite3_stmt_scanstatus() to return.
	**
	** When the value returned to V is a string, space to hold that string is
	** managed by the prepared statement S and will be automatically freed when
	** S is finalized.
	**
	** <dl>
	** [[SQLITE_SCANSTAT_NLOOP]] <dt>SQLITE_SCANSTAT_NLOOP</dt>
	** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be
	** set to the total number of times that the X-th loop has run.</dd>
	**
	** [[SQLITE_SCANSTAT_NVISIT]] <dt>SQLITE_SCANSTAT_NVISIT</dt>
	** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be set
	** to the total number of rows examined by all iterations of the X-th loop.</dd>
	**
	** [[SQLITE_SCANSTAT_EST]] <dt>SQLITE_SCANSTAT_EST</dt>
	** <dd>^The "double" variable pointed to by the T parameter will be set to the
	** query planner's estimate for the average number of rows output from each
	** iteration of the X-th loop. If the query planner's estimates was accurate,
	** then this value will approximate the quotient NVISIT/NLOOP and the
	** product of this value for all prior loops with the same SELECTID will
	** be the NLOOP value for the current loop.
	**
	** [[SQLITE_SCANSTAT_NAME]] <dt>SQLITE_SCANSTAT_NAME</dt>
	** <dd>^The "const char *" variable pointed to by the T parameter will be set
	** to a zero-terminated UTF-8 string containing the name of the index or table
	** used for the X-th loop.
	**
	** [[SQLITE_SCANSTAT_EXPLAIN]] <dt>SQLITE_SCANSTAT_EXPLAIN</dt>
	** <dd>^The "const char *" variable pointed to by the T parameter will be set
	** to a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN]
	** description for the X-th loop.
	**
	** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECT</dt>
	** <dd>^The "int" variable pointed to by the T parameter will be set to the
	** "select-id" for the X-th loop. The select-id identifies which query or
	** subquery the loop is part of. The main query has a select-id of zero.
	** The select-id is the same value as is output in the first column
	** of an [EXPLAIN QUERY PLAN] query.
	** </dl>
	*/
	#define SQLITE_SCANSTAT_NLOOP 0
	#define SQLITE_SCANSTAT_NVISIT 1
	#define SQLITE_SCANSTAT_EST 2
	#define SQLITE_SCANSTAT_NAME 3
	#define SQLITE_SCANSTAT_EXPLAIN 4
	#define SQLITE_SCANSTAT_SELECTID 5

	/*
	** CAPI3REF: Prepared Statement Scan Status
	** METHOD: sqlite3_stmt
	**
	** This interface returns information about the predicted and measured
	** performance for pStmt. Advanced applications can use this
	** interface to compare the predicted and the measured performance and
	** issue warnings and/or rerun [ANALYZE] if discrepancies are found.
	**
	** Since this interface is expected to be rarely used, it is only
	** available if SQLite is compiled using the [SQLITE_ENABLE_STMT_SCANSTATUS]
	** compile-time option.
	**
	** The "iScanStatusOp" parameter determines which status information to return.
	** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior
	** of this interface is undefined.
	** ^The requested measurement is written into a variable pointed to by
	** the "pOut" parameter.
	** Parameter "idx" identifies the specific loop to retrieve statistics for.
	** Loops are numbered starting from zero. ^If idx is out of range - less than
	** zero or greater than or equal to the total number of loops used to implement
	** the statement - a non-zero value is returned and the variable that pOut
	** points to is unchanged.
	**
	** ^Statistics might not be available for all loops in all statements. ^In cases
	** where there exist loops with no available statistics, this function behaves
	** as if the loop did not exist - it returns non-zero and leave the variable
	** that pOut points to unchanged.
	**
	** See also: [sqlite3_stmt_scanstatus_reset()]
	*/
	SQLITE_API int sqlite3_stmt_scanstatus(
	sqlite3_stmt pStmt, / Prepared statement for which info desired */
	int idx, /* Index of loop to report on */
	int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */
	void pOut / Result written here */
	);

/*	/*
	** CAPI3REF: Zero Scan-Status Counters
	** METHOD: sqlite3_stmt
	**
	** ^Zero all [sqlite3_stmt_scanstatus()] related event counters.
	**
	** This API is only available if the library is built with pre-processor
	** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
	*/
	SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);

	/*
	** CAPI3REF: Flush caches to disk mid-transaction
	**
	** ^If a write-transaction is open on [database connection] D when the
	** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
	** pages in the pager-cache that are not currently in use are written out
	** to disk. A dirty page may be in use if a database cursor created by an
	** active SQL statement is reading from it, or if it is page 1 of a database
	** file (page 1 is always "in use"). ^The [sqlite3_db_cacheflush(D)]
	** interface flushes caches for all schemas - "main", "temp", and
	** any [attached] databases.
	**
	** ^If this function needs to obtain extra database locks before dirty pages
	** can be flushed to disk, it does so. ^If those locks cannot be obtained
	** immediately and there is a busy-handler callback configured, it is invoked
	** in the usual manner. ^If the required lock still cannot be obtained, then
	** the database is skipped and an attempt made to flush any dirty pages
	** belonging to the next (if any) database. ^If any databases are skipped
	** because locks cannot be obtained, but no other error occurs, this
	** function returns SQLITE_BUSY.
	**
	** ^If any other error occurs while flushing dirty pages to disk (for
	** example an IO error or out-of-memory condition), then processing is
	** abandoned and an SQLite [error code] is returned to the caller immediately.
	**
	** ^Otherwise, if no error occurs, [sqlite3_db_cacheflush()] returns SQLITE_OK.
	**
	** ^This function does not set the database handle error code or message
	** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
	*/
	SQLITE_API int sqlite3_db_cacheflush(sqlite3*);

	/*
	** CAPI3REF: The pre-update hook.
	**
	** ^These interfaces are only available if SQLite is compiled using the
	** [SQLITE_ENABLE_PREUPDATE_HOOK] compile-time option.
	**
	** ^The [sqlite3_preupdate_hook()] interface registers a callback function
	** that is invoked prior to each [INSERT], [UPDATE], and [DELETE] operation
	** on a [rowid table].
	** ^At most one preupdate hook may be registered at a time on a single
	** [database connection]; each call to [sqlite3_preupdate_hook()] overrides
	** the previous setting.
	** ^The preupdate hook is disabled by invoking [sqlite3_preupdate_hook()]
	** with a NULL pointer as the second parameter.
	** ^The third parameter to [sqlite3_preupdate_hook()] is passed through as
	** the first parameter to callbacks.
	**
	** ^The preupdate hook only fires for changes to [rowid tables]; the preupdate
	** hook is not invoked for changes to [virtual tables] or [WITHOUT ROWID]
	** tables.
	**
	** ^The second parameter to the preupdate callback is a pointer to
	** the [database connection] that registered the preupdate hook.
	** ^The third parameter to the preupdate callback is one of the constants
	** [SQLITE_INSERT], [SQLITE_DELETE], or [SQLITE_UPDATE] to identify the
	** kind of update operation that is about to occur.
	** ^(The fourth parameter to the preupdate callback is the name of the
	** database within the database connection that is being modified. This
	** will be "main" for the main database or "temp" for TEMP tables or
	** the name given after the AS keyword in the [ATTACH] statement for attached
	** databases.)^
	** ^The fifth parameter to the preupdate callback is the name of the
	** table that is being modified.
	** ^The sixth parameter to the preupdate callback is the initial [rowid] of the
	** row being changes for SQLITE_UPDATE and SQLITE_DELETE changes and is
	** undefined for SQLITE_INSERT changes.
	** ^The seventh parameter to the preupdate callback is the final [rowid] of
	** the row being changed for SQLITE_UPDATE and SQLITE_INSERT changes and is
	** undefined for SQLITE_DELETE changes.
	**
	** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
	** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
	** provide additional information about a preupdate event. These routines
	** may only be called from within a preupdate callback. Invoking any of
	** these routines from outside of a preupdate callback or with a
	** [database connection] pointer that is different from the one supplied
	** to the preupdate callback results in undefined and probably undesirable
	** behavior.
	**
	** ^The [sqlite3_preupdate_count(D)] interface returns the number of columns
	** in the row that is being inserted, updated, or deleted.
	**
	** ^The [sqlite3_preupdate_old(D,N,P)] interface writes into P a pointer to
	** a [protected sqlite3_value] that contains the value of the Nth column of
	** the table row before it is updated. The N parameter must be between 0
	** and one less than the number of columns or the behavior will be
	** undefined. This must only be used within SQLITE_UPDATE and SQLITE_DELETE
	** preupdate callbacks; if it is used by an SQLITE_INSERT callback then the
	** behavior is undefined. The [sqlite3_value] that P points to
	** will be destroyed when the preupdate callback returns.
	**
	** ^The [sqlite3_preupdate_new(D,N,P)] interface writes into P a pointer to
	** a [protected sqlite3_value] that contains the value of the Nth column of
	** the table row after it is updated. The N parameter must be between 0
	** and one less than the number of columns or the behavior will be
	** undefined. This must only be used within SQLITE_INSERT and SQLITE_UPDATE
	** preupdate callbacks; if it is used by an SQLITE_DELETE callback then the
	** behavior is undefined. The [sqlite3_value] that P points to
	** will be destroyed when the preupdate callback returns.
	**
	** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate
	** callback was invoked as a result of a direct insert, update, or delete
	** operation; or 1 for inserts, updates, or deletes invoked by top-level
	** triggers; or 2 for changes resulting from triggers called by top-level
	** triggers; and so forth.
	**
	** See also: [sqlite3_update_hook()]
	*/
	SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_preupdate_hook(
	sqlite3 *db,
	void(*xPreUpdate)(
	void pCtx, / Copy of third arg to preupdate_hook() */
	sqlite3 db, / Database handle */
	int op, /* SQLITE_UPDATE, DELETE or INSERT */
	char const zDb, / Database name */
	char const zName, / Table name */
	sqlite3_int64 iKey1, /* Rowid of row about to be deleted/updated */
	sqlite3_int64 iKey2 /* New rowid value (for a rowid UPDATE) */
	),
	void*
	);
	SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_old(sqlite3 , int, sqlite3_value *);
	SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_count(sqlite3 *);
	SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_depth(sqlite3 *);
	SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_new(sqlite3 , int, sqlite3_value *);

	/*
	** CAPI3REF: Low-level system error code
	**
	** ^Attempt to return the underlying operating system error code or error
	** number that caused the most recent I/O error or failure to open a file.
	** The return value is OS-dependent. For example, on unix systems, after
	** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
	** called to get back the underlying "errno" that caused the problem, such
	** as ENOSPC, EAUTH, EISDIR, and so forth.
	*/
	SQLITE_API int sqlite3_system_errno(sqlite3*);

	/*
	** CAPI3REF: Database Snapshot
	** KEYWORDS: {snapshot}
	** EXPERIMENTAL
	**
	** An instance of the snapshot object records the state of a [WAL mode]
	** database for some specific point in history.
	**
	** In [WAL mode], multiple [database connections] that are open on the
	** same database file can each be reading a different historical version
	** of the database file. When a [database connection] begins a read
	** transaction, that connection sees an unchanging copy of the database
	** as it existed for the point in time when the transaction first started.
	** Subsequent changes to the database from other connections are not seen
	** by the reader until a new read transaction is started.
	**
	** The sqlite3_snapshot object records state information about an historical
	** version of the database file so that it is possible to later open a new read
	** transaction that sees that historical version of the database rather than
	** the most recent version.
	**
	** The constructor for this object is [sqlite3_snapshot_get()]. The
	** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
	** to an historical snapshot (if possible). The destructor for
	** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
	*/
	typedef struct sqlite3_snapshot sqlite3_snapshot;

	/*
	** CAPI3REF: Record A Database Snapshot
	** EXPERIMENTAL
	**
	** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
	** new [sqlite3_snapshot] object that records the current state of
	** schema S in database connection D. ^On success, the
	** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
	** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
	** ^If schema S of [database connection] D is not a [WAL mode] database
	** that is in a read transaction, then [sqlite3_snapshot_get(D,S,P)]
	** leaves the *P value unchanged and returns an appropriate [error code].
	**
	** The [sqlite3_snapshot] object returned from a successful call to
	** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()]
	** to avoid a memory leak.
	**
	** The [sqlite3_snapshot_get()] interface is only available when the
	** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
	*/
	SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
	sqlite3 *db,
	const char *zSchema,
	sqlite3_snapshot **ppSnapshot
	);

	/*
	** CAPI3REF: Start a read transaction on an historical snapshot
	** EXPERIMENTAL
	**
	** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a
	** read transaction for schema S of
	** [database connection] D such that the read transaction
	** refers to historical [snapshot] P, rather than the most
	** recent change to the database.
	** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
	** or an appropriate [error code] if it fails.
	**
	** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
	** the first operation following the [BEGIN] that takes the schema S
	** out of [autocommit mode].
	** ^In other words, schema S must not currently be in
	** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the
	** database connection D must be out of [autocommit mode].
	** ^A [snapshot] will fail to open if it has been overwritten by a
	** [checkpoint].
	** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the
	** database connection D does not know that the database file for
	** schema S is in [WAL mode]. A database connection might not know
	** that the database file is in [WAL mode] if there has been no prior
	** I/O on that database connection, or if the database entered [WAL mode]
	** after the most recent I/O on the database connection.)^
	** (Hint: Run "[PRAGMA application_id]" against a newly opened
	** database connection in order to make it ready to use snapshots.)
	**
	** The [sqlite3_snapshot_open()] interface is only available when the
	** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
	*/
	SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
	sqlite3 *db,
	const char *zSchema,
	sqlite3_snapshot *pSnapshot
	);

	/*
	** CAPI3REF: Destroy a snapshot
	** EXPERIMENTAL
	**
	** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
	** The application must eventually free every [sqlite3_snapshot] object
	** using this routine to avoid a memory leak.
	**
	** The [sqlite3_snapshot_free()] interface is only available when the
	** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
	*/
	SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);

	/*
	** CAPI3REF: Compare the ages of two snapshot handles.
	** EXPERIMENTAL
	**
	** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
	** of two valid snapshot handles.
	**
	** If the two snapshot handles are not associated with the same database
	** file, the result of the comparison is undefined.
	**
	** Additionally, the result of the comparison is only valid if both of the
	** snapshot handles were obtained by calling sqlite3_snapshot_get() since the
	** last time the wal file was deleted. The wal file is deleted when the
	** database is changed back to rollback mode or when the number of database
	** clients drops to zero. If either snapshot handle was obtained before the
	** wal file was last deleted, the value returned by this function
	** is undefined.
	**
	** Otherwise, this API returns a negative value if P1 refers to an older
	** snapshot than P2, zero if the two handles refer to the same database
	** snapshot, and a positive value if P1 is a newer snapshot than P2.
	*/
	SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
	sqlite3_snapshot *p1,
	sqlite3_snapshot *p2
	);

	/*
** Undo the hack that converts floating point types to integer for	** Undo the hack that converts floating point types to integer for
** builds on processors without floating point support.	** builds on processors without floating point support.
*/	*/
Line 7096 SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);	Line 8359 SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
#ifdef __cplusplus	#ifdef __cplusplus
} /* End of the 'extern "C"' block */	} /* End of the 'extern "C"' block */
#endif	#endif
#endif	#endif /* SQLITE3_H */

	/****** Begin file sqlite3rtree.h *******/
/*	/*
** 2010 August 30	** 2010 August 30
**	**
Line 7120 extern "C" {	Line 8384 extern "C" {
#endif	#endif

typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;	typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
	typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info;

	/* The double-precision datatype used by RTree depends on the
	** SQLITE_RTREE_INT_ONLY compile-time option.
	*/
	#ifdef SQLITE_RTREE_INT_ONLY
	typedef sqlite3_int64 sqlite3_rtree_dbl;
	#else
	typedef double sqlite3_rtree_dbl;
	#endif

/*	/*
** Register a geometry callback named zGeom that can be used as part of an	** Register a geometry callback named zGeom that can be used as part of an
** R-Tree geometry query as follows:	** R-Tree geometry query as follows:
Line 7130 typedef struct sqlite3_rtree_geometry sqlite3_rtree_ge	Line 8404 typedef struct sqlite3_rtree_geometry sqlite3_rtree_ge
SQLITE_API int sqlite3_rtree_geometry_callback(	SQLITE_API int sqlite3_rtree_geometry_callback(
sqlite3 *db,	sqlite3 *db,
const char *zGeom,	const char *zGeom,
#ifdef SQLITE_RTREE_INT_ONLY	int (xGeom)(sqlite3_rtree_geometry, int, sqlite3_rtree_dbl,int),
int (xGeom)(sqlite3_rtree_geometry, int n, sqlite3_int64 a, int pRes),
#else
int (xGeom)(sqlite3_rtree_geometry, int n, double a, int pRes),
#endif
void *pContext	void *pContext
);	);

Line 7146 SQLITE_API int sqlite3_rtree_geometry_callback(	Line 8416 SQLITE_API int sqlite3_rtree_geometry_callback(
struct sqlite3_rtree_geometry {	struct sqlite3_rtree_geometry {
void pContext; / Copy of pContext passed to s_r_g_c() */	void pContext; / Copy of pContext passed to s_r_g_c() */
int nParam; /* Size of array aParam[] */	int nParam; /* Size of array aParam[] */
double aParam; / Parameters passed to SQL geom function */	sqlite3_rtree_dbl aParam; / Parameters passed to SQL geom function */
void pUser; / Callback implementation user data */	void pUser; / Callback implementation user data */
void (xDelUser)(void ); /* Called by SQLite to clean up pUser */	void (xDelUser)(void ); /* Called by SQLite to clean up pUser */
};	};

	/*
	** Register a 2nd-generation geometry callback named zScore that can be
	** used as part of an R-Tree geometry query as follows:
	**
	** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
	*/
	SQLITE_API int sqlite3_rtree_query_callback(
	sqlite3 *db,
	const char *zQueryFunc,
	int (xQueryFunc)(sqlite3_rtree_query_info),
	void *pContext,
	void (xDestructor)(void)
	);


	/*
	** A pointer to a structure of the following type is passed as the
	** argument to scored geometry callback registered using
	** sqlite3_rtree_query_callback().
	**
	** Note that the first 5 fields of this structure are identical to
	** sqlite3_rtree_geometry. This structure is a subclass of
	** sqlite3_rtree_geometry.
	*/
	struct sqlite3_rtree_query_info {
	void pContext; / pContext from when function registered */
	int nParam; /* Number of function parameters */
	sqlite3_rtree_dbl aParam; / value of function parameters */
	void pUser; / callback can use this, if desired */
	void (xDelUser)(void); /* function to free pUser */
	sqlite3_rtree_dbl aCoord; / Coordinates of node or entry to check */
	unsigned int anQueue; / Number of pending entries in the queue */
	int nCoord; /* Number of coordinates */
	int iLevel; /* Level of current node or entry */
	int mxLevel; /* The largest iLevel value in the tree */
	sqlite3_int64 iRowid; /* Rowid for current entry */
	sqlite3_rtree_dbl rParentScore; /* Score of parent node */
	int eParentWithin; /* Visibility of parent node */
	int eWithin; /* OUT: Visiblity */
	sqlite3_rtree_dbl rScore; /* OUT: Write the score here */
	/* The following fields are only available in 3.8.11 and later */
	sqlite3_value *apSqlParam; / Original SQL values of parameters */
	};

	/*
	** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin.
	*/
	#define NOT_WITHIN 0 /* Object completely outside of query region */
	#define PARTLY_WITHIN 1 /* Object partially overlaps query region */
	#define FULLY_WITHIN 2 /* Object fully contained within query region */


#ifdef __cplusplus	#ifdef __cplusplus
} /* end of the 'extern "C"' block */	} /* end of the 'extern "C"' block */
#endif	#endif

#endif /* ifndef _SQLITE3RTREE_H_ */	#endif /* ifndef _SQLITE3RTREE_H_ */

	/****** End of sqlite3rtree.h *******/
	/****** Begin file sqlite3session.h *******/

	#if !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION)
	#define __SQLITESESSION_H_ 1

	/*
	** Make sure we can call this stuff from C++.
	*/
	#ifdef __cplusplus
	extern "C" {
	#endif


	/*
	** CAPI3REF: Session Object Handle
	*/
	typedef struct sqlite3_session sqlite3_session;

	/*
	** CAPI3REF: Changeset Iterator Handle
	*/
	typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;

	/*
	** CAPI3REF: Create A New Session Object
	**
	** Create a new session object attached to database handle db. If successful,
	** a pointer to the new object is written to *ppSession and SQLITE_OK is
	** returned. If an error occurs, *ppSession is set to NULL and an SQLite
	** error code (e.g. SQLITE_NOMEM) is returned.
	**
	** It is possible to create multiple session objects attached to a single
	** database handle.
	**
	** Session objects created using this function should be deleted using the
	** [sqlite3session_delete()] function before the database handle that they
	** are attached to is itself closed. If the database handle is closed before
	** the session object is deleted, then the results of calling any session
	** module function, including [sqlite3session_delete()] on the session object
	** are undefined.
	**
	** Because the session module uses the [sqlite3_preupdate_hook()] API, it
	** is not possible for an application to register a pre-update hook on a
	** database handle that has one or more session objects attached. Nor is
	** it possible to create a session object attached to a database handle for
	** which a pre-update hook is already defined. The results of attempting
	** either of these things are undefined.
	**
	** The session object will be used to create changesets for tables in
	** database zDb, where zDb is either "main", or "temp", or the name of an
	** attached database. It is not an error if database zDb is not attached
	** to the database when the session object is created.
	*/
	int sqlite3session_create(
	sqlite3 db, / Database handle */
	const char zDb, / Name of db (e.g. "main") */
	sqlite3_session *ppSession / OUT: New session object */
	);

	/*
	** CAPI3REF: Delete A Session Object
	**
	** Delete a session object previously allocated using
	** [sqlite3session_create()]. Once a session object has been deleted, the
	** results of attempting to use pSession with any other session module
	** function are undefined.
	**
	** Session objects must be deleted before the database handle to which they
	** are attached is closed. Refer to the documentation for
	** [sqlite3session_create()] for details.
	*/
	void sqlite3session_delete(sqlite3_session *pSession);


	/*
	** CAPI3REF: Enable Or Disable A Session Object
	**
	** Enable or disable the recording of changes by a session object. When
	** enabled, a session object records changes made to the database. When
	** disabled - it does not. A newly created session object is enabled.
	** Refer to the documentation for [sqlite3session_changeset()] for further
	** details regarding how enabling and disabling a session object affects
	** the eventual changesets.
	**
	** Passing zero to this function disables the session. Passing a value
	** greater than zero enables it. Passing a value less than zero is a
	** no-op, and may be used to query the current state of the session.
	**
	** The return value indicates the final state of the session object: 0 if
	** the session is disabled, or 1 if it is enabled.
	*/
	int sqlite3session_enable(sqlite3_session *pSession, int bEnable);

	/*
	** CAPI3REF: Set Or Clear the Indirect Change Flag
	**
	** Each change recorded by a session object is marked as either direct or
	** indirect. A change is marked as indirect if either:
	**
	** <ul>
	** <li> The session object "indirect" flag is set when the change is
	** made, or
	** <li> The change is made by an SQL trigger or foreign key action
	** instead of directly as a result of a users SQL statement.
	** </ul>
	**
	** If a single row is affected by more than one operation within a session,
	** then the change is considered indirect if all operations meet the criteria
	** for an indirect change above, or direct otherwise.
	**
	** This function is used to set, clear or query the session object indirect
	** flag. If the second argument passed to this function is zero, then the
	** indirect flag is cleared. If it is greater than zero, the indirect flag
	** is set. Passing a value less than zero does not modify the current value
	** of the indirect flag, and may be used to query the current state of the
	** indirect flag for the specified session object.
	**
	** The return value indicates the final state of the indirect flag: 0 if
	** it is clear, or 1 if it is set.
	*/
	int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);

	/*
	** CAPI3REF: Attach A Table To A Session Object
	**
	** If argument zTab is not NULL, then it is the name of a table to attach
	** to the session object passed as the first argument. All subsequent changes
	** made to the table while the session object is enabled will be recorded. See
	** documentation for [sqlite3session_changeset()] for further details.
	**
	** Or, if argument zTab is NULL, then changes are recorded for all tables
	** in the database. If additional tables are added to the database (by
	** executing "CREATE TABLE" statements) after this call is made, changes for
	** the new tables are also recorded.
	**
	** Changes can only be recorded for tables that have a PRIMARY KEY explicitly
	** defined as part of their CREATE TABLE statement. It does not matter if the
	** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY
	** KEY may consist of a single column, or may be a composite key.
	**
	** It is not an error if the named table does not exist in the database. Nor
	** is it an error if the named table does not have a PRIMARY KEY. However,
	** no changes will be recorded in either of these scenarios.
	**
	** Changes are not recorded for individual rows that have NULL values stored
	** in one or more of their PRIMARY KEY columns.
	**
	** SQLITE_OK is returned if the call completes without error. Or, if an error
	** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
	*/
	int sqlite3session_attach(
	sqlite3_session pSession, / Session object */
	const char zTab / Table name */
	);

	/*
	** CAPI3REF: Set a table filter on a Session Object.
	**
	** The second argument (xFilter) is the "filter callback". For changes to rows
	** in tables that are not attached to the Session oject, the filter is called
	** to determine whether changes to the table's rows should be tracked or not.
	** If xFilter returns 0, changes is not tracked. Note that once a table is
	** attached, xFilter will not be called again.
	*/
	void sqlite3session_table_filter(
	sqlite3_session pSession, / Session object */
	int(*xFilter)(
	void pCtx, / Copy of third arg to _filter_table() */
	const char zTab / Table name */
	),
	void pCtx / First argument passed to xFilter */
	);

	/*
	** CAPI3REF: Generate A Changeset From A Session Object
	**
	** Obtain a changeset containing changes to the tables attached to the
	** session object passed as the first argument. If successful,
	** set *ppChangeset to point to a buffer containing the changeset
	** and *pnChangeset to the size of the changeset in bytes before returning
	** SQLITE_OK. If an error occurs, set both ppChangeset and pnChangeset to
	** zero and return an SQLite error code.
	**
	** A changeset consists of zero or more INSERT, UPDATE and/or DELETE changes,
	** each representing a change to a single row of an attached table. An INSERT
	** change contains the values of each field of a new database row. A DELETE
	** contains the original values of each field of a deleted database row. An
	** UPDATE change contains the original values of each field of an updated
	** database row along with the updated values for each updated non-primary-key
	** column. It is not possible for an UPDATE change to represent a change that
	** modifies the values of primary key columns. If such a change is made, it
	** is represented in a changeset as a DELETE followed by an INSERT.
	**
	** Changes are not recorded for rows that have NULL values stored in one or
	** more of their PRIMARY KEY columns. If such a row is inserted or deleted,
	** no corresponding change is present in the changesets returned by this
	** function. If an existing row with one or more NULL values stored in
	** PRIMARY KEY columns is updated so that all PRIMARY KEY columns are non-NULL,
	** only an INSERT is appears in the changeset. Similarly, if an existing row
	** with non-NULL PRIMARY KEY values is updated so that one or more of its
	** PRIMARY KEY columns are set to NULL, the resulting changeset contains a
	** DELETE change only.
	**
	** The contents of a changeset may be traversed using an iterator created
	** using the [sqlite3changeset_start()] API. A changeset may be applied to
	** a database with a compatible schema using the [sqlite3changeset_apply()]
	** API.
	**
	** Within a changeset generated by this function, all changes related to a
	** single table are grouped together. In other words, when iterating through
	** a changeset or when applying a changeset to a database, all changes related
	** to a single table are processed before moving on to the next table. Tables
	** are sorted in the same order in which they were attached (or auto-attached)
	** to the sqlite3_session object. The order in which the changes related to
	** a single table are stored is undefined.
	**
	** Following a successful call to this function, it is the responsibility of
	** the caller to eventually free the buffer that *ppChangeset points to using
	** [sqlite3_free()].
	**
	** <h3>Changeset Generation</h3>
	**
	** Once a table has been attached to a session object, the session object
	** records the primary key values of all new rows inserted into the table.
	** It also records the original primary key and other column values of any
	** deleted or updated rows. For each unique primary key value, data is only
	** recorded once - the first time a row with said primary key is inserted,
	** updated or deleted in the lifetime of the session.
	**
	** There is one exception to the previous paragraph: when a row is inserted,
	** updated or deleted, if one or more of its primary key columns contain a
	** NULL value, no record of the change is made.
	**
	** The session object therefore accumulates two types of records - those
	** that consist of primary key values only (created when the user inserts
	** a new record) and those that consist of the primary key values and the
	** original values of other table columns (created when the users deletes
	** or updates a record).
	**
	** When this function is called, the requested changeset is created using
	** both the accumulated records and the current contents of the database
	** file. Specifically:
	**
	** <ul>
	** <li> For each record generated by an insert, the database is queried
	** for a row with a matching primary key. If one is found, an INSERT
	** change is added to the changeset. If no such row is found, no change
	** is added to the changeset.
	**
	** <li> For each record generated by an update or delete, the database is
	** queried for a row with a matching primary key. If such a row is
	** found and one or more of the non-primary key fields have been
	** modified from their original values, an UPDATE change is added to
	** the changeset. Or, if no such row is found in the table, a DELETE
	** change is added to the changeset. If there is a row with a matching
	** primary key in the database, but all fields contain their original
	** values, no change is added to the changeset.
	** </ul>
	**
	** This means, amongst other things, that if a row is inserted and then later
	** deleted while a session object is active, neither the insert nor the delete
	** will be present in the changeset. Or if a row is deleted and then later a
	** row with the same primary key values inserted while a session object is
	** active, the resulting changeset will contain an UPDATE change instead of
	** a DELETE and an INSERT.
	**
	** When a session object is disabled (see the [sqlite3session_enable()] API),
	** it does not accumulate records when rows are inserted, updated or deleted.
	** This may appear to have some counter-intuitive effects if a single row
	** is written to more than once during a session. For example, if a row
	** is inserted while a session object is enabled, then later deleted while
	** the same session object is disabled, no INSERT record will appear in the
	** changeset, even though the delete took place while the session was disabled.
	** Or, if one field of a row is updated while a session is disabled, and
	** another field of the same row is updated while the session is enabled, the
	** resulting changeset will contain an UPDATE change that updates both fields.
	*/
	int sqlite3session_changeset(
	sqlite3_session pSession, / Session object */
	int pnChangeset, / OUT: Size of buffer at ppChangeset /
	void *ppChangeset / OUT: Buffer containing changeset */
	);

	/*
	** CAPI3REF: Load The Difference Between Tables Into A Session
	**
	** If it is not already attached to the session object passed as the first
	** argument, this function attaches table zTbl in the same manner as the
	** [sqlite3session_attach()] function. If zTbl does not exist, or if it
	** does not have a primary key, this function is a no-op (but does not return
	** an error).
	**
	** Argument zFromDb must be the name of a database ("main", "temp" etc.)
	** attached to the same database handle as the session object that contains
	** a table compatible with the table attached to the session by this function.
	** A table is considered compatible if it:
	**
	** <ul>
	** <li> Has the same name,
	** <li> Has the same set of columns declared in the same order, and
	** <li> Has the same PRIMARY KEY definition.
	** </ul>
	**
	** If the tables are not compatible, SQLITE_SCHEMA is returned. If the tables
	** are compatible but do not have any PRIMARY KEY columns, it is not an error
	** but no changes are added to the session object. As with other session
	** APIs, tables without PRIMARY KEYs are simply ignored.
	**
	** This function adds a set of changes to the session object that could be
	** used to update the table in database zFrom (call this the "from-table")
	** so that its content is the same as the table attached to the session
	** object (call this the "to-table"). Specifically:
	**
	** <ul>
	** <li> For each row (primary key) that exists in the to-table but not in
	** the from-table, an INSERT record is added to the session object.
	**
	** <li> For each row (primary key) that exists in the to-table but not in
	** the from-table, a DELETE record is added to the session object.
	**
	** <li> For each row (primary key) that exists in both tables, but features
	** different in each, an UPDATE record is added to the session.
	** </ul>
	**
	** To clarify, if this function is called and then a changeset constructed
	** using [sqlite3session_changeset()], then after applying that changeset to
	** database zFrom the contents of the two compatible tables would be
	** identical.
	**
	** It an error if database zFrom does not exist or does not contain the
	** required compatible table.
	**
	** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite
	** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
	** may be set to point to a buffer containing an English language error
	** message. It is the responsibility of the caller to free this buffer using
	** sqlite3_free().
	*/
	int sqlite3session_diff(
	sqlite3_session *pSession,
	const char *zFromDb,
	const char *zTbl,
	char **pzErrMsg
	);


	/*
	** CAPI3REF: Generate A Patchset From A Session Object
	**
	** The differences between a patchset and a changeset are that:
	**
	** <ul>
	** <li> DELETE records consist of the primary key fields only. The
	** original values of other fields are omitted.
	** <li> The original values of any modified fields are omitted from
	** UPDATE records.
	** </ul>
	**
	** A patchset blob may be used with up to date versions of all
	** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(),
	** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly,
	** attempting to use a patchset blob with old versions of the
	** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.
	**
	** Because the non-primary key "old.*" fields are omitted, no
	** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset
	** is passed to the sqlite3changeset_apply() API. Other conflict types work
	** in the same way as for changesets.
	**
	** Changes within a patchset are ordered in the same way as for changesets
	** generated by the sqlite3session_changeset() function (i.e. all changes for
	** a single table are grouped together, tables appear in the order in which
	** they were attached to the session object).
	*/
	int sqlite3session_patchset(
	sqlite3_session pSession, / Session object */
	int pnPatchset, / OUT: Size of buffer at ppChangeset /
	void *ppPatchset / OUT: Buffer containing changeset */
	);

	/*
	** CAPI3REF: Test if a changeset has recorded any changes.
	**
	** Return non-zero if no changes to attached tables have been recorded by
	** the session object passed as the first argument. Otherwise, if one or
	** more changes have been recorded, return zero.
	**
	** Even if this function returns zero, it is possible that calling
	** [sqlite3session_changeset()] on the session handle may still return a
	** changeset that contains no changes. This can happen when a row in
	** an attached table is modified and then later on the original values
	** are restored. However, if this function returns non-zero, then it is
	** guaranteed that a call to sqlite3session_changeset() will return a
	** changeset containing zero changes.
	*/
	int sqlite3session_isempty(sqlite3_session *pSession);

	/*
	** CAPI3REF: Create An Iterator To Traverse A Changeset
	**
	** Create an iterator used to iterate through the contents of a changeset.
	** If successful, *pp is set to point to the iterator handle and SQLITE_OK
	** is returned. Otherwise, if an error occurs, *pp is set to zero and an
	** SQLite error code is returned.
	**
	** The following functions can be used to advance and query a changeset
	** iterator created by this function:
	**
	** <ul>
	** <li> [sqlite3changeset_next()]
	** <li> [sqlite3changeset_op()]
	** <li> [sqlite3changeset_new()]
	** <li> [sqlite3changeset_old()]
	** </ul>
	**
	** It is the responsibility of the caller to eventually destroy the iterator
	** by passing it to [sqlite3changeset_finalize()]. The buffer containing the
	** changeset (pChangeset) must remain valid until after the iterator is
	** destroyed.
	**
	** Assuming the changeset blob was created by one of the
	** [sqlite3session_changeset()], [sqlite3changeset_concat()] or
	** [sqlite3changeset_invert()] functions, all changes within the changeset
	** that apply to a single table are grouped together. This means that when
	** an application iterates through a changeset using an iterator created by
	** this function, all changes that relate to a single table are visted
	** consecutively. There is no chance that the iterator will visit a change
	** the applies to table X, then one for table Y, and then later on visit
	** another change for table X.
	*/
	int sqlite3changeset_start(
	sqlite3_changeset_iter *pp, / OUT: New changeset iterator handle */
	int nChangeset, /* Size of changeset blob in bytes */
	void pChangeset / Pointer to blob containing changeset */
	);


	/*
	** CAPI3REF: Advance A Changeset Iterator
	**
	** This function may only be used with iterators created by function
	** [sqlite3changeset_start()]. If it is called on an iterator passed to
	** a conflict-handler callback by [sqlite3changeset_apply()], SQLITE_MISUSE
	** is returned and the call has no effect.
	**
	** Immediately after an iterator is created by sqlite3changeset_start(), it
	** does not point to any change in the changeset. Assuming the changeset
	** is not empty, the first call to this function advances the iterator to
	** point to the first change in the changeset. Each subsequent call advances
	** the iterator to point to the next change in the changeset (if any). If
	** no error occurs and the iterator points to a valid change after a call
	** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned.
	** Otherwise, if all changes in the changeset have already been visited,
	** SQLITE_DONE is returned.
	**
	** If an error occurs, an SQLite error code is returned. Possible error
	** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or
	** SQLITE_NOMEM.
	*/
	int sqlite3changeset_next(sqlite3_changeset_iter *pIter);

	/*
	** CAPI3REF: Obtain The Current Operation From A Changeset Iterator
	**
	** The pIter argument passed to this function may either be an iterator
	** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
	** created by [sqlite3changeset_start()]. In the latter case, the most recent
	** call to [sqlite3changeset_next()] must have returned [SQLITE_ROW]. If this
	** is not the case, this function returns [SQLITE_MISUSE].
	**
	** If argument pzTab is not NULL, then *pzTab is set to point to a
	** nul-terminated utf-8 encoded string containing the name of the table
	** affected by the current change. The buffer remains valid until either
	** sqlite3changeset_next() is called on the iterator or until the
	** conflict-handler function returns. If pnCol is not NULL, then *pnCol is
	** set to the number of columns in the table affected by the change. If
	** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change
	** is an indirect change, or false (0) otherwise. See the documentation for
	** [sqlite3session_indirect()] for a description of direct and indirect
	** changes. Finally, if pOp is not NULL, then *pOp is set to one of
	** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the
	** type of change that the iterator currently points to.
	**
	** If no error occurs, SQLITE_OK is returned. If an error does occur, an
	** SQLite error code is returned. The values of the output variables may not
	** be trusted in this case.
	*/
	int sqlite3changeset_op(
	sqlite3_changeset_iter pIter, / Iterator object */
	const char *pzTab, / OUT: Pointer to table name */
	int pnCol, / OUT: Number of columns in table */
	int pOp, / OUT: SQLITE_INSERT, DELETE or UPDATE */
	int pbIndirect / OUT: True for an 'indirect' change */
	);

	/*
	** CAPI3REF: Obtain The Primary Key Definition Of A Table
	**
	** For each modified table, a changeset includes the following:
	**
	** <ul>
	** <li> The number of columns in the table, and
	** <li> Which of those columns make up the tables PRIMARY KEY.
	** </ul>
	**
	** This function is used to find which columns comprise the PRIMARY KEY of
	** the table modified by the change that iterator pIter currently points to.
	** If successful, *pabPK is set to point to an array of nCol entries, where
	** nCol is the number of columns in the table. Elements of *pabPK are set to
	** 0x01 if the corresponding column is part of the tables primary key, or
	** 0x00 if it is not.
	**
	** If argumet pnCol is not NULL, then *pnCol is set to the number of columns
	** in the table.
	**
	** If this function is called when the iterator does not point to a valid
	** entry, SQLITE_MISUSE is returned and the output variables zeroed. Otherwise,
	** SQLITE_OK is returned and the output variables populated as described
	** above.
	*/
	int sqlite3changeset_pk(
	sqlite3_changeset_iter pIter, / Iterator object */
	unsigned char *pabPK, / OUT: Array of boolean - true for PK cols */
	int pnCol / OUT: Number of entries in output array */
	);

	/*
	** CAPI3REF: Obtain old.* Values From A Changeset Iterator
	**
	** The pIter argument passed to this function may either be an iterator
	** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
	** created by [sqlite3changeset_start()]. In the latter case, the most recent
	** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
	** Furthermore, it may only be called if the type of change that the iterator
	** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise,
	** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
	**
	** Argument iVal must be greater than or equal to 0, and less than the number
	** of columns in the table affected by the current change. Otherwise,
	** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
	**
	** If successful, this function sets *ppValue to point to a protected
	** sqlite3_value object containing the iVal'th value from the vector of
	** original row values stored as part of the UPDATE or DELETE change and
	** returns SQLITE_OK. The name of the function comes from the fact that this
	** is similar to the "old.*" columns available to update or delete triggers.
	**
	** If some other error occurs (e.g. an OOM condition), an SQLite error code
	** is returned and *ppValue is set to NULL.
	*/
	int sqlite3changeset_old(
	sqlite3_changeset_iter pIter, / Changeset iterator */
	int iVal, /* Column number */
	sqlite3_value *ppValue / OUT: Old value (or NULL pointer) */
	);

	/*
	** CAPI3REF: Obtain new.* Values From A Changeset Iterator
	**
	** The pIter argument passed to this function may either be an iterator
	** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
	** created by [sqlite3changeset_start()]. In the latter case, the most recent
	** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
	** Furthermore, it may only be called if the type of change that the iterator
	** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise,
	** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
	**
	** Argument iVal must be greater than or equal to 0, and less than the number
	** of columns in the table affected by the current change. Otherwise,
	** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
	**
	** If successful, this function sets *ppValue to point to a protected
	** sqlite3_value object containing the iVal'th value from the vector of
	** new row values stored as part of the UPDATE or INSERT change and
	** returns SQLITE_OK. If the change is an UPDATE and does not include
	** a new value for the requested column, *ppValue is set to NULL and
	** SQLITE_OK returned. The name of the function comes from the fact that
	** this is similar to the "new.*" columns available to update or delete
	** triggers.
	**
	** If some other error occurs (e.g. an OOM condition), an SQLite error code
	** is returned and *ppValue is set to NULL.
	*/
	int sqlite3changeset_new(
	sqlite3_changeset_iter pIter, / Changeset iterator */
	int iVal, /* Column number */
	sqlite3_value *ppValue / OUT: New value (or NULL pointer) */
	);

	/*
	** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator
	**
	** This function should only be used with iterator objects passed to a
	** conflict-handler callback by [sqlite3changeset_apply()] with either
	** [SQLITE_CHANGESET_DATA] or [SQLITE_CHANGESET_CONFLICT]. If this function
	** is called on any other iterator, [SQLITE_MISUSE] is returned and *ppValue
	** is set to NULL.
	**
	** Argument iVal must be greater than or equal to 0, and less than the number
	** of columns in the table affected by the current change. Otherwise,
	** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
	**
	** If successful, this function sets *ppValue to point to a protected
	** sqlite3_value object containing the iVal'th value from the
	** "conflicting row" associated with the current conflict-handler callback
	** and returns SQLITE_OK.
	**
	** If some other error occurs (e.g. an OOM condition), an SQLite error code
	** is returned and *ppValue is set to NULL.
	*/
	int sqlite3changeset_conflict(
	sqlite3_changeset_iter pIter, / Changeset iterator */
	int iVal, /* Column number */
	sqlite3_value *ppValue / OUT: Value from conflicting row */
	);

	/*
	** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations
	**
	** This function may only be called with an iterator passed to an
	** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
	** it sets the output variable to the total number of known foreign key
	** violations in the destination database and returns SQLITE_OK.
	**
	** In all other cases this function returns SQLITE_MISUSE.
	*/
	int sqlite3changeset_fk_conflicts(
	sqlite3_changeset_iter pIter, / Changeset iterator */
	int pnOut / OUT: Number of FK violations */
	);


	/*
	** CAPI3REF: Finalize A Changeset Iterator
	**
	** This function is used to finalize an iterator allocated with
	** [sqlite3changeset_start()].
	**
	** This function should only be called on iterators created using the
	** [sqlite3changeset_start()] function. If an application calls this
	** function with an iterator passed to a conflict-handler by
	** [sqlite3changeset_apply()], [SQLITE_MISUSE] is immediately returned and the
	** call has no effect.
	**
	** If an error was encountered within a call to an sqlite3changeset_xxx()
	** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an
	** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding
	** to that error is returned by this function. Otherwise, SQLITE_OK is
	** returned. This is to allow the following pattern (pseudo-code):
	**
	** sqlite3changeset_start();
	** while( SQLITE_ROW==sqlite3changeset_next() ){
	** // Do something with change.
	** }
	** rc = sqlite3changeset_finalize();
	** if( rc!=SQLITE_OK ){
	** // An error has occurred
	** }
	*/
	int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);

	/*
	** CAPI3REF: Invert A Changeset
	**
	** This function is used to "invert" a changeset object. Applying an inverted
	** changeset to a database reverses the effects of applying the uninverted
	** changeset. Specifically:
	**
	** <ul>
	** <li> Each DELETE change is changed to an INSERT, and
	** <li> Each INSERT change is changed to a DELETE, and
	** <li> For each UPDATE change, the old.* and new.* values are exchanged.
	** </ul>
	**
	** This function does not change the order in which changes appear within
	** the changeset. It merely reverses the sense of each individual change.
	**
	** If successful, a pointer to a buffer containing the inverted changeset
	** is stored in ppOut, the size of the same buffer is stored in pnOut, and
	** SQLITE_OK is returned. If an error occurs, both pnOut and ppOut are
	** zeroed and an SQLite error code returned.
	**
	** It is the responsibility of the caller to eventually call sqlite3_free()
	** on the *ppOut pointer to free the buffer allocation following a successful
	** call to this function.
	**
	** WARNING/TODO: This function currently assumes that the input is a valid
	** changeset. If it is not, the results are undefined.
	*/
	int sqlite3changeset_invert(
	int nIn, const void pIn, / Input changeset */
	int pnOut, void ppOut / OUT: Inverse of input */
	);

	/*
	** CAPI3REF: Concatenate Two Changeset Objects
	**
	** This function is used to concatenate two changesets, A and B, into a
	** single changeset. The result is a changeset equivalent to applying
	** changeset A followed by changeset B.
	**
	** This function combines the two input changesets using an
	** sqlite3_changegroup object. Calling it produces similar results as the
	** following code fragment:
	**
	** sqlite3_changegroup *pGrp;
	** rc = sqlite3_changegroup_new(&pGrp);
	** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
	** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nB, pB);
	** if( rc==SQLITE_OK ){
	** rc = sqlite3changegroup_output(pGrp, pnOut, ppOut);
	** }else{
	** *ppOut = 0;
	** *pnOut = 0;
	** }
	**
	** Refer to the sqlite3_changegroup documentation below for details.
	*/
	int sqlite3changeset_concat(
	int nA, /* Number of bytes in buffer pA */
	void pA, / Pointer to buffer containing changeset A */
	int nB, /* Number of bytes in buffer pB */
	void pB, / Pointer to buffer containing changeset B */
	int pnOut, / OUT: Number of bytes in output changeset */
	void *ppOut / OUT: Buffer containing output changeset */
	);


	/*
	** Changegroup handle.
	*/
	typedef struct sqlite3_changegroup sqlite3_changegroup;

	/*
	** CAPI3REF: Combine two or more changesets into a single changeset.
	**
	** An sqlite3_changegroup object is used to combine two or more changesets
	** (or patchsets) into a single changeset (or patchset). A single changegroup
	** object may combine changesets or patchsets, but not both. The output is
	** always in the same format as the input.
	**
	** If successful, this function returns SQLITE_OK and populates (*pp) with
	** a pointer to a new sqlite3_changegroup object before returning. The caller
	** should eventually free the returned object using a call to
	** sqlite3changegroup_delete(). If an error occurs, an SQLite error code
	** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.
	**
	** The usual usage pattern for an sqlite3_changegroup object is as follows:
	**
	** <ul>
	** <li> It is created using a call to sqlite3changegroup_new().
	**
	** <li> Zero or more changesets (or patchsets) are added to the object
	** by calling sqlite3changegroup_add().
	**
	** <li> The result of combining all input changesets together is obtained
	** by the application via a call to sqlite3changegroup_output().
	**
	** <li> The object is deleted using a call to sqlite3changegroup_delete().
	** </ul>
	**
	** Any number of calls to add() and output() may be made between the calls to
	** new() and delete(), and in any order.
	**
	** As well as the regular sqlite3changegroup_add() and
	** sqlite3changegroup_output() functions, also available are the streaming
	** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().
	*/
	int sqlite3changegroup_new(sqlite3_changegroup **pp);

	/*
	** Add all changes within the changeset (or patchset) in buffer pData (size
	** nData bytes) to the changegroup.
	**
	** If the buffer contains a patchset, then all prior calls to this function
	** on the same changegroup object must also have specified patchsets. Or, if
	** the buffer contains a changeset, so must have the earlier calls to this
	** function. Otherwise, SQLITE_ERROR is returned and no changes are added
	** to the changegroup.
	**
	** Rows within the changeset and changegroup are identified by the values in
	** their PRIMARY KEY columns. A change in the changeset is considered to
	** apply to the same row as a change already present in the changegroup if
	** the two rows have the same primary key.
	**
	** Changes to rows that that do not already appear in the changegroup are
	** simply copied into it. Or, if both the new changeset and the changegroup
	** contain changes that apply to a single row, the final contents of the
	** changegroup depends on the type of each change, as follows:
	**
	** <table border=1 style="margin-left:8ex;margin-right:8ex">
	** <tr><th style="white-space:pre">Existing Change </th>
	** <th style="white-space:pre">New Change </th>
	** <th>Output Change
	** <tr><td>INSERT <td>INSERT <td>
	** The new change is ignored. This case does not occur if the new
	** changeset was recorded immediately after the changesets already
	** added to the changegroup.
	** <tr><td>INSERT <td>UPDATE <td>
	** The INSERT change remains in the changegroup. The values in the
	** INSERT change are modified as if the row was inserted by the
	** existing change and then updated according to the new change.
	** <tr><td>INSERT <td>DELETE <td>
	** The existing INSERT is removed from the changegroup. The DELETE is
	** not added.
	** <tr><td>UPDATE <td>INSERT <td>
	** The new change is ignored. This case does not occur if the new
	** changeset was recorded immediately after the changesets already
	** added to the changegroup.
	** <tr><td>UPDATE <td>UPDATE <td>
	** The existing UPDATE remains within the changegroup. It is amended
	** so that the accompanying values are as if the row was updated once
	** by the existing change and then again by the new change.
	** <tr><td>UPDATE <td>DELETE <td>
	** The existing UPDATE is replaced by the new DELETE within the
	** changegroup.
	** <tr><td>DELETE <td>INSERT <td>
	** If one or more of the column values in the row inserted by the
	** new change differ from those in the row deleted by the existing
	** change, the existing DELETE is replaced by an UPDATE within the
	** changegroup. Otherwise, if the inserted row is exactly the same
	** as the deleted row, the existing DELETE is simply discarded.
	** <tr><td>DELETE <td>UPDATE <td>
	** The new change is ignored. This case does not occur if the new
	** changeset was recorded immediately after the changesets already
	** added to the changegroup.
	** <tr><td>DELETE <td>DELETE <td>
	** The new change is ignored. This case does not occur if the new
	** changeset was recorded immediately after the changesets already
	** added to the changegroup.
	** </table>
	**
	** If the new changeset contains changes to a table that is already present
	** in the changegroup, then the number of columns and the position of the
	** primary key columns for the table must be consistent. If this is not the
	** case, this function fails with SQLITE_SCHEMA. If the input changeset
	** appears to be corrupt and the corruption is detected, SQLITE_CORRUPT is
	** returned. Or, if an out-of-memory condition occurs during processing, this
	** function returns SQLITE_NOMEM. In all cases, if an error occurs the
	** final contents of the changegroup is undefined.
	**
	** If no error occurs, SQLITE_OK is returned.
	*/
	int sqlite3changegroup_add(sqlite3_changegroup, int nData, void pData);

	/*
	** Obtain a buffer containing a changeset (or patchset) representing the
	** current contents of the changegroup. If the inputs to the changegroup
	** were themselves changesets, the output is a changeset. Or, if the
	** inputs were patchsets, the output is also a patchset.
	**
	** As with the output of the sqlite3session_changeset() and
	** sqlite3session_patchset() functions, all changes related to a single
	** table are grouped together in the output of this function. Tables appear
	** in the same order as for the very first changeset added to the changegroup.
	** If the second or subsequent changesets added to the changegroup contain
	** changes for tables that do not appear in the first changeset, they are
	** appended onto the end of the output changeset, again in the order in
	** which they are first encountered.
	**
	** If an error occurs, an SQLite error code is returned and the output
	** variables (pnData) and (ppData) are set to 0. Otherwise, SQLITE_OK
	** is returned and the output variables are set to the size of and a
	** pointer to the output buffer, respectively. In this case it is the
	** responsibility of the caller to eventually free the buffer using a
	** call to sqlite3_free().
	*/
	int sqlite3changegroup_output(
	sqlite3_changegroup*,
	int pnData, / OUT: Size of output buffer in bytes */
	void *ppData / OUT: Pointer to output buffer */
	);

	/*
	** Delete a changegroup object.
	*/
	void sqlite3changegroup_delete(sqlite3_changegroup*);

	/*
	** CAPI3REF: Apply A Changeset To A Database
	**
	** Apply a changeset to a database. This function attempts to update the
	** "main" database attached to handle db with the changes found in the
	** changeset passed via the second and third arguments.
	**
	** The fourth argument (xFilter) passed to this function is the "filter
	** callback". If it is not NULL, then for each table affected by at least one
	** change in the changeset, the filter callback is invoked with
	** the table name as the second argument, and a copy of the context pointer
	** passed as the sixth argument to this function as the first. If the "filter
	** callback" returns zero, then no attempt is made to apply any changes to
	** the table. Otherwise, if the return value is non-zero or the xFilter
	** argument to this function is NULL, all changes related to the table are
	** attempted.
	**
	** For each table that is not excluded by the filter callback, this function
	** tests that the target database contains a compatible table. A table is
	** considered compatible if all of the following are true:
	**
	** <ul>
	** <li> The table has the same name as the name recorded in the
	** changeset, and
	** <li> The table has the same number of columns as recorded in the
	** changeset, and
	** <li> The table has primary key columns in the same position as
	** recorded in the changeset.
	** </ul>
	**
	** If there is no compatible table, it is not an error, but none of the
	** changes associated with the table are applied. A warning message is issued
	** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most
	** one such warning is issued for each table in the changeset.
	**
	** For each change for which there is a compatible table, an attempt is made
	** to modify the table contents according to the UPDATE, INSERT or DELETE
	** change. If a change cannot be applied cleanly, the conflict handler
	** function passed as the fifth argument to sqlite3changeset_apply() may be
	** invoked. A description of exactly when the conflict handler is invoked for
	** each type of change is below.
	**
	** Unlike the xFilter argument, xConflict may not be passed NULL. The results
	** of passing anything other than a valid function pointer as the xConflict
	** argument are undefined.
	**
	** Each time the conflict handler function is invoked, it must return one
	** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or
	** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned
	** if the second argument passed to the conflict handler is either
	** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler
	** returns an illegal value, any changes already made are rolled back and
	** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different
	** actions are taken by sqlite3changeset_apply() depending on the value
	** returned by each invocation of the conflict-handler function. Refer to
	** the documentation for the three
	** [SQLITE_CHANGESET_OMIT\|available return values] for details.
	**
	** <dl>
	** <dt>DELETE Changes<dd>
	** For each DELETE change, this function checks if the target database
	** contains a row with the same primary key value (or values) as the
	** original row values stored in the changeset. If it does, and the values
	** stored in all non-primary key columns also match the values stored in
	** the changeset the row is deleted from the target database.
	**
	** If a row with matching primary key values is found, but one or more of
	** the non-primary key fields contains a value different from the original
	** row value stored in the changeset, the conflict-handler function is
	** invoked with [SQLITE_CHANGESET_DATA] as the second argument.
	**
	** If no row with matching primary key values is found in the database,
	** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
	** passed as the second argument.
	**
	** If the DELETE operation is attempted, but SQLite returns SQLITE_CONSTRAINT
	** (which can only happen if a foreign key constraint is violated), the
	** conflict-handler function is invoked with [SQLITE_CHANGESET_CONSTRAINT]
	** passed as the second argument. This includes the case where the DELETE
	** operation is attempted because an earlier call to the conflict handler
	** function returned [SQLITE_CHANGESET_REPLACE].
	**
	** <dt>INSERT Changes<dd>
	** For each INSERT change, an attempt is made to insert the new row into
	** the database.
	**
	** If the attempt to insert the row fails because the database already
	** contains a row with the same primary key values, the conflict handler
	** function is invoked with the second argument set to
	** [SQLITE_CHANGESET_CONFLICT].
	**
	** If the attempt to insert the row fails because of some other constraint
	** violation (e.g. NOT NULL or UNIQUE), the conflict handler function is
	** invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT].
	** This includes the case where the INSERT operation is re-attempted because
	** an earlier call to the conflict handler function returned
	** [SQLITE_CHANGESET_REPLACE].
	**
	** <dt>UPDATE Changes<dd>
	** For each UPDATE change, this function checks if the target database
	** contains a row with the same primary key value (or values) as the
	** original row values stored in the changeset. If it does, and the values
	** stored in all non-primary key columns also match the values stored in
	** the changeset the row is updated within the target database.
	**
	** If a row with matching primary key values is found, but one or more of
	** the non-primary key fields contains a value different from an original
	** row value stored in the changeset, the conflict-handler function is
	** invoked with [SQLITE_CHANGESET_DATA] as the second argument. Since
	** UPDATE changes only contain values for non-primary key fields that are
	** to be modified, only those fields need to match the original values to
	** avoid the SQLITE_CHANGESET_DATA conflict-handler callback.
	**
	** If no row with matching primary key values is found in the database,
	** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
	** passed as the second argument.
	**
	** If the UPDATE operation is attempted, but SQLite returns
	** SQLITE_CONSTRAINT, the conflict-handler function is invoked with
	** [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument.
	** This includes the case where the UPDATE operation is attempted after
	** an earlier call to the conflict handler function returned
	** [SQLITE_CHANGESET_REPLACE].
	** </dl>
	**
	** It is safe to execute SQL statements, including those that write to the
	** table that the callback related to, from within the xConflict callback.
	** This can be used to further customize the applications conflict
	** resolution strategy.
	**
	** All changes made by this function are enclosed in a savepoint transaction.
	** If any other error (aside from a constraint failure when attempting to
	** write to the target database) occurs, then the savepoint transaction is
	** rolled back, restoring the target database to its original state, and an
	** SQLite error code returned.
	*/
	int sqlite3changeset_apply(
	sqlite3 db, / Apply change to "main" db of this handle */
	int nChangeset, /* Size of changeset in bytes */
	void pChangeset, / Changeset blob */
	int(*xFilter)(
	void pCtx, / Copy of sixth arg to _apply() */
	const char zTab / Table name */
	),
	int(*xConflict)(
	void pCtx, / Copy of sixth arg to _apply() */
	int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
	sqlite3_changeset_iter p / Handle describing change and conflict */
	),
	void pCtx / First argument passed to xConflict */
	);

	/*
	** CAPI3REF: Constants Passed To The Conflict Handler
	**
	** Values that may be passed as the second argument to a conflict-handler.
	**
	** <dl>
	** <dt>SQLITE_CHANGESET_DATA<dd>
	** The conflict handler is invoked with CHANGESET_DATA as the second argument
	** when processing a DELETE or UPDATE change if a row with the required
	** PRIMARY KEY fields is present in the database, but one or more other
	** (non primary-key) fields modified by the update do not contain the
	** expected "before" values.
	**
	** The conflicting row, in this case, is the database row with the matching
	** primary key.
	**
	** <dt>SQLITE_CHANGESET_NOTFOUND<dd>
	** The conflict handler is invoked with CHANGESET_NOTFOUND as the second
	** argument when processing a DELETE or UPDATE change if a row with the
	** required PRIMARY KEY fields is not present in the database.
	**
	** There is no conflicting row in this case. The results of invoking the
	** sqlite3changeset_conflict() API are undefined.
	**
	** <dt>SQLITE_CHANGESET_CONFLICT<dd>
	** CHANGESET_CONFLICT is passed as the second argument to the conflict
	** handler while processing an INSERT change if the operation would result
	** in duplicate primary key values.
	**
	** The conflicting row in this case is the database row with the matching
	** primary key.
	**
	** <dt>SQLITE_CHANGESET_FOREIGN_KEY<dd>
	** If foreign key handling is enabled, and applying a changeset leaves the
	** database in a state containing foreign key violations, the conflict
	** handler is invoked with CHANGESET_FOREIGN_KEY as the second argument
	** exactly once before the changeset is committed. If the conflict handler
	** returns CHANGESET_OMIT, the changes, including those that caused the
	** foreign key constraint violation, are committed. Or, if it returns
	** CHANGESET_ABORT, the changeset is rolled back.
	**
	** No current or conflicting row information is provided. The only function
	** it is possible to call on the supplied sqlite3_changeset_iter handle
	** is sqlite3changeset_fk_conflicts().
	**
	** <dt>SQLITE_CHANGESET_CONSTRAINT<dd>
	** If any other constraint violation occurs while applying a change (i.e.
	** a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is
	** invoked with CHANGESET_CONSTRAINT as the second argument.
	**
	** There is no conflicting row in this case. The results of invoking the
	** sqlite3changeset_conflict() API are undefined.
	**
	** </dl>
	*/
	#define SQLITE_CHANGESET_DATA 1
	#define SQLITE_CHANGESET_NOTFOUND 2
	#define SQLITE_CHANGESET_CONFLICT 3
	#define SQLITE_CHANGESET_CONSTRAINT 4
	#define SQLITE_CHANGESET_FOREIGN_KEY 5

	/*
	** CAPI3REF: Constants Returned By The Conflict Handler
	**
	** A conflict handler callback must return one of the following three values.
	**
	** <dl>
	** <dt>SQLITE_CHANGESET_OMIT<dd>
	** If a conflict handler returns this value no special action is taken. The
	** change that caused the conflict is not applied. The session module
	** continues to the next change in the changeset.
	**
	** <dt>SQLITE_CHANGESET_REPLACE<dd>
	** This value may only be returned if the second argument to the conflict
	** handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this
	** is not the case, any changes applied so far are rolled back and the
	** call to sqlite3changeset_apply() returns SQLITE_MISUSE.
	**
	** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict
	** handler, then the conflicting row is either updated or deleted, depending
	** on the type of change.
	**
	** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_CONFLICT conflict
	** handler, then the conflicting row is removed from the database and a
	** second attempt to apply the change is made. If this second attempt fails,
	** the original row is restored to the database before continuing.
	**
	** <dt>SQLITE_CHANGESET_ABORT<dd>
	** If this value is returned, any changes applied so far are rolled back
	** and the call to sqlite3changeset_apply() returns SQLITE_ABORT.
	** </dl>
	*/
	#define SQLITE_CHANGESET_OMIT 0
	#define SQLITE_CHANGESET_REPLACE 1
	#define SQLITE_CHANGESET_ABORT 2

	/*
	** CAPI3REF: Streaming Versions of API functions.
	**
	** The six streaming API xxx_strm() functions serve similar purposes to the
	** corresponding non-streaming API functions:
	**
	** <table border=1 style="margin-left:8ex;margin-right:8ex">
	** <tr><th>Streaming function<th>Non-streaming equivalent</th>
	** <tr><td>sqlite3changeset_apply_str<td>[sqlite3changeset_apply]
	** <tr><td>sqlite3changeset_concat_str<td>[sqlite3changeset_concat]
	** <tr><td>sqlite3changeset_invert_str<td>[sqlite3changeset_invert]
	** <tr><td>sqlite3changeset_start_str<td>[sqlite3changeset_start]
	** <tr><td>sqlite3session_changeset_str<td>[sqlite3session_changeset]
	** <tr><td>sqlite3session_patchset_str<td>[sqlite3session_patchset]
	** </table>
	**
	** Non-streaming functions that accept changesets (or patchsets) as input
	** require that the entire changeset be stored in a single buffer in memory.
	** Similarly, those that return a changeset or patchset do so by returning
	** a pointer to a single large buffer allocated using sqlite3_malloc().
	** Normally this is convenient. However, if an application running in a
	** low-memory environment is required to handle very large changesets, the
	** large contiguous memory allocations required can become onerous.
	**
	** In order to avoid this problem, instead of a single large buffer, input
	** is passed to a streaming API functions by way of a callback function that
	** the sessions module invokes to incrementally request input data as it is
	** required. In all cases, a pair of API function parameters such as
	**
	** <pre>
	**   int nChangeset,
	**   void *pChangeset,
	** </pre>
	**
	** Is replaced by:
	**
	** <pre>
	**   int (xInput)(void pIn, void pData, int pnData),
	**   void *pIn,
	** </pre>
	**
	** Each time the xInput callback is invoked by the sessions module, the first
	** argument passed is a copy of the supplied pIn context pointer. The second
	** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no
	** error occurs the xInput method should copy up to (*pnData) bytes of data
	** into the buffer and set (*pnData) to the actual number of bytes copied
	** before returning SQLITE_OK. If the input is completely exhausted, (*pnData)
	** should be set to zero to indicate this. Or, if an error occurs, an SQLite
	** error code should be returned. In all cases, if an xInput callback returns
	** an error, all processing is abandoned and the streaming API function
	** returns a copy of the error code to the caller.
	**
	** In the case of sqlite3changeset_start_strm(), the xInput callback may be
	** invoked by the sessions module at any point during the lifetime of the
	** iterator. If such an xInput callback returns an error, the iterator enters
	** an error state, whereby all subsequent calls to iterator functions
	** immediately fail with the same error code as returned by xInput.
	**
	** Similarly, streaming API functions that return changesets (or patchsets)
	** return them in chunks by way of a callback function instead of via a
	** pointer to a single large buffer. In this case, a pair of parameters such
	** as:
	**
	** <pre>
	**   int *pnChangeset,
	void ppChangeset,
	** </pre>
	**
	** Is replaced by:
	**
	** <pre>
	**   int (xOutput)(void pOut, const void *pData, int nData),
	**   void *pOut
	** </pre>
	**
	** The xOutput callback is invoked zero or more times to return data to
	** the application. The first parameter passed to each call is a copy of the
	** pOut pointer supplied by the application. The second parameter, pData,
	** points to a buffer nData bytes in size containing the chunk of output
	** data being returned. If the xOutput callback successfully processes the
	** supplied data, it should return SQLITE_OK to indicate success. Otherwise,
	** it should return some other SQLite error code. In this case processing
	** is immediately abandoned and the streaming API function returns a copy
	** of the xOutput error code to the application.
	**
	** The sessions module never invokes an xOutput callback with the third
	** parameter set to a value less than or equal to zero. Other than this,
	** no guarantees are made as to the size of the chunks of data returned.
	*/
	int sqlite3changeset_apply_strm(
	sqlite3 db, / Apply change to "main" db of this handle */
	int (xInput)(void pIn, void pData, int pnData), /* Input function */
	void pIn, / First arg for xInput */
	int(*xFilter)(
	void pCtx, / Copy of sixth arg to _apply() */
	const char zTab / Table name */
	),
	int(*xConflict)(
	void pCtx, / Copy of sixth arg to _apply() */
	int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
	sqlite3_changeset_iter p / Handle describing change and conflict */
	),
	void pCtx / First argument passed to xConflict */
	);
	int sqlite3changeset_concat_strm(
	int (xInputA)(void pIn, void pData, int pnData),
	void *pInA,
	int (xInputB)(void pIn, void pData, int pnData),
	void *pInB,
	int (xOutput)(void pOut, const void *pData, int nData),
	void *pOut
	);
	int sqlite3changeset_invert_strm(
	int (xInput)(void pIn, void pData, int pnData),
	void *pIn,
	int (xOutput)(void pOut, const void *pData, int nData),
	void *pOut
	);
	int sqlite3changeset_start_strm(
	sqlite3_changeset_iter **pp,
	int (xInput)(void pIn, void pData, int pnData),
	void *pIn
	);
	int sqlite3session_changeset_strm(
	sqlite3_session *pSession,
	int (xOutput)(void pOut, const void *pData, int nData),
	void *pOut
	);
	int sqlite3session_patchset_strm(
	sqlite3_session *pSession,
	int (xOutput)(void pOut, const void *pData, int nData),
	void *pOut
	);
	int sqlite3changegroup_add_strm(sqlite3_changegroup*,
	int (xInput)(void pIn, void pData, int pnData),
	void *pIn
	);
	int sqlite3changegroup_output_strm(sqlite3_changegroup*,
	int (xOutput)(void pOut, const void *pData, int nData),
	void *pOut
	);


	/*
	** Make sure we can call this stuff from C++.
	*/
	#ifdef __cplusplus
	}
	#endif

	#endif /* !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION) */

	/****** End of sqlite3session.h *******/
	/****** Begin file fts5.h *******/
	/*
	** 2014 May 31
	**
	** The author disclaims copyright to this source code. In place of
	** a legal notice, here is a blessing:
	**
	** May you do good and not evil.
	** May you find forgiveness for yourself and forgive others.
	** May you share freely, never taking more than you give.
	**
	******************************************************************************
	**
	** Interfaces to extend FTS5. Using the interfaces defined in this file,
	** FTS5 may be extended with:
	**
	** * custom tokenizers, and
	** * custom auxiliary functions.
	*/


	#ifndef _FTS5_H
	#define _FTS5_H


	#ifdef __cplusplus
	extern "C" {
	#endif

	/*************************************************************************
	** CUSTOM AUXILIARY FUNCTIONS
	**
	** Virtual table implementations may overload SQL functions by implementing
	** the sqlite3_module.xFindFunction() method.
	*/

	typedef struct Fts5ExtensionApi Fts5ExtensionApi;
	typedef struct Fts5Context Fts5Context;
	typedef struct Fts5PhraseIter Fts5PhraseIter;

	typedef void (*fts5_extension_function)(
	const Fts5ExtensionApi pApi, / API offered by current FTS version */
	Fts5Context pFts, / First arg to pass to pApi functions */
	sqlite3_context pCtx, / Context for returning result/error */
	int nVal, /* Number of values in apVal[] array */
	sqlite3_value *apVal / Array of trailing arguments */
	);

	struct Fts5PhraseIter {
	const unsigned char *a;
	const unsigned char *b;
	};

	/*
	** EXTENSION API FUNCTIONS
	**
	** xUserData(pFts):
	** Return a copy of the context pointer the extension function was
	** registered with.
	**
	** xColumnTotalSize(pFts, iCol, pnToken):
	** If parameter iCol is less than zero, set output variable *pnToken
	** to the total number of tokens in the FTS5 table. Or, if iCol is
	** non-negative but less than the number of columns in the table, return
	** the total number of tokens in column iCol, considering all rows in
	** the FTS5 table.
	**
	** If parameter iCol is greater than or equal to the number of columns
	** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
	** an OOM condition or IO error), an appropriate SQLite error code is
	** returned.
	**
	** xColumnCount(pFts):
	** Return the number of columns in the table.
	**
	** xColumnSize(pFts, iCol, pnToken):
	** If parameter iCol is less than zero, set output variable *pnToken
	** to the total number of tokens in the current row. Or, if iCol is
	** non-negative but less than the number of columns in the table, set
	** *pnToken to the number of tokens in column iCol of the current row.
	**
	** If parameter iCol is greater than or equal to the number of columns
	** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
	** an OOM condition or IO error), an appropriate SQLite error code is
	** returned.
	**
	** This function may be quite inefficient if used with an FTS5 table
	** created with the "columnsize=0" option.
	**
	** xColumnText:
	** This function attempts to retrieve the text of column iCol of the
	** current document. If successful, (*pz) is set to point to a buffer
	** containing the text in utf-8 encoding, (*pn) is set to the size in bytes
	** (not characters) of the buffer and SQLITE_OK is returned. Otherwise,
	** if an error occurs, an SQLite error code is returned and the final values
	** of (pz) and (pn) are undefined.
	**
	** xPhraseCount:
	** Returns the number of phrases in the current query expression.
	**
	** xPhraseSize:
	** Returns the number of tokens in phrase iPhrase of the query. Phrases
	** are numbered starting from zero.
	**
	** xInstCount:
	** Set *pnInst to the total number of occurrences of all phrases within
	** the query within the current row. Return SQLITE_OK if successful, or
	** an error code (i.e. SQLITE_NOMEM) if an error occurs.
	**
	** This API can be quite slow if used with an FTS5 table created with the
	** "detail=none" or "detail=column" option. If the FTS5 table is created
	** with either "detail=none" or "detail=column" and "content=" option
	** (i.e. if it is a contentless table), then this API always returns 0.
	**
	** xInst:
	** Query for the details of phrase match iIdx within the current row.
	** Phrase matches are numbered starting from zero, so the iIdx argument
	** should be greater than or equal to zero and smaller than the value
	** output by xInstCount().
	**
	** Usually, output parameter piPhrase is set to the phrase number, piCol
	** to the column in which it occurs and *piOff the token offset of the
	** first token of the phrase. The exception is if the table was created
	** with the offsets=0 option specified. In this case *piOff is always
	** set to -1.
	**
	** Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM)
	** if an error occurs.
	**
	** This API can be quite slow if used with an FTS5 table created with the
	** "detail=none" or "detail=column" option.
	**
	** xRowid:
	** Returns the rowid of the current row.
	**
	** xTokenize:
	** Tokenize text using the tokenizer belonging to the FTS5 table.
	**
	** xQueryPhrase(pFts5, iPhrase, pUserData, xCallback):
	** This API function is used to query the FTS table for phrase iPhrase
	** of the current query. Specifically, a query equivalent to:
	**
	** ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid
	**
	** with $p set to a phrase equivalent to the phrase iPhrase of the
	** current query is executed. Any column filter that applies to
	** phrase iPhrase of the current query is included in $p. For each
	** row visited, the callback function passed as the fourth argument
	** is invoked. The context and API objects passed to the callback
	** function may be used to access the properties of each matched row.
	** Invoking Api.xUserData() returns a copy of the pointer passed as
	** the third argument to pUserData.
	**
	** If the callback function returns any value other than SQLITE_OK, the
	** query is abandoned and the xQueryPhrase function returns immediately.
	** If the returned value is SQLITE_DONE, xQueryPhrase returns SQLITE_OK.
	** Otherwise, the error code is propagated upwards.
	**
	** If the query runs to completion without incident, SQLITE_OK is returned.
	** Or, if some error occurs before the query completes or is aborted by
	** the callback, an SQLite error code is returned.
	**
	**
	** xSetAuxdata(pFts5, pAux, xDelete)
	**
	** Save the pointer passed as the second argument as the extension functions
	** "auxiliary data". The pointer may then be retrieved by the current or any
	** future invocation of the same fts5 extension function made as part of
	** of the same MATCH query using the xGetAuxdata() API.
	**
	** Each extension function is allocated a single auxiliary data slot for
	** each FTS query (MATCH expression). If the extension function is invoked
	** more than once for a single FTS query, then all invocations share a
	** single auxiliary data context.
	**
	** If there is already an auxiliary data pointer when this function is
	** invoked, then it is replaced by the new pointer. If an xDelete callback
	** was specified along with the original pointer, it is invoked at this
	** point.
	**
	** The xDelete callback, if one is specified, is also invoked on the
	** auxiliary data pointer after the FTS5 query has finished.
	**
	** If an error (e.g. an OOM condition) occurs within this function, an
	** the auxiliary data is set to NULL and an error code returned. If the
	** xDelete parameter was not NULL, it is invoked on the auxiliary data
	** pointer before returning.
	**
	**
	** xGetAuxdata(pFts5, bClear)
	**
	** Returns the current auxiliary data pointer for the fts5 extension
	** function. See the xSetAuxdata() method for details.
	**
	** If the bClear argument is non-zero, then the auxiliary data is cleared
	** (set to NULL) before this function returns. In this case the xDelete,
	** if any, is not invoked.
	**
	**
	** xRowCount(pFts5, pnRow)
	**
	** This function is used to retrieve the total number of rows in the table.
	** In other words, the same value that would be returned by:
	**
	** SELECT count(*) FROM ftstable;
	**
	** xPhraseFirst()
	** This function is used, along with type Fts5PhraseIter and the xPhraseNext
	** method, to iterate through all instances of a single query phrase within
	** the current row. This is the same information as is accessible via the
	** xInstCount/xInst APIs. While the xInstCount/xInst APIs are more convenient
	** to use, this API may be faster under some circumstances. To iterate
	** through instances of phrase iPhrase, use the following code:
	**
	** Fts5PhraseIter iter;
	** int iCol, iOff;
	** for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff);
	** iCol>=0;
	** pApi->xPhraseNext(pFts, &iter, &iCol, &iOff)
	** ){
	** // An instance of phrase iPhrase at offset iOff of column iCol
	** }
	**
	** The Fts5PhraseIter structure is defined above. Applications should not
	** modify this structure directly - it should only be used as shown above
	** with the xPhraseFirst() and xPhraseNext() API methods (and by
	** xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
	**
	** This API can be quite slow if used with an FTS5 table created with the
	** "detail=none" or "detail=column" option. If the FTS5 table is created
	** with either "detail=none" or "detail=column" and "content=" option
	** (i.e. if it is a contentless table), then this API always iterates
	** through an empty set (all calls to xPhraseFirst() set iCol to -1).
	**
	** xPhraseNext()
	** See xPhraseFirst above.
	**
	** xPhraseFirstColumn()
	** This function and xPhraseNextColumn() are similar to the xPhraseFirst()
	** and xPhraseNext() APIs described above. The difference is that instead
	** of iterating through all instances of a phrase in the current row, these
	** APIs are used to iterate through the set of columns in the current row
	** that contain one or more instances of a specified phrase. For example:
	**
	** Fts5PhraseIter iter;
	** int iCol;
	** for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol);
	** iCol>=0;
	** pApi->xPhraseNextColumn(pFts, &iter, &iCol)
	** ){
	** // Column iCol contains at least one instance of phrase iPhrase
	** }
	**
	** This API can be quite slow if used with an FTS5 table created with the
	** "detail=none" option. If the FTS5 table is created with either
	** "detail=none" "content=" option (i.e. if it is a contentless table),
	** then this API always iterates through an empty set (all calls to
	** xPhraseFirstColumn() set iCol to -1).
	**
	** The information accessed using this API and its companion
	** xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
	** (or xInst/xInstCount). The chief advantage of this API is that it is
	** significantly more efficient than those alternatives when used with
	** "detail=column" tables.
	**
	** xPhraseNextColumn()
	** See xPhraseFirstColumn above.
	*/
	struct Fts5ExtensionApi {
	int iVersion; /* Currently always set to 3 */

	void (xUserData)(Fts5Context*);

	int (xColumnCount)(Fts5Context);
	int (xRowCount)(Fts5Context, sqlite3_int64 *pnRow);
	int (xColumnTotalSize)(Fts5Context, int iCol, sqlite3_int64 *pnToken);

	int (xTokenize)(Fts5Context,
	const char pText, int nText, / Text to tokenize */
	void pCtx, / Context passed to xToken() */
	int (xToken)(void, int, const char, int, int, int) / Callback */
	);

	int (xPhraseCount)(Fts5Context);
	int (xPhraseSize)(Fts5Context, int iPhrase);

	int (xInstCount)(Fts5Context, int *pnInst);
	int (xInst)(Fts5Context, int iIdx, int piPhrase, int piCol, int *piOff);

	sqlite3_int64 (xRowid)(Fts5Context);
	int (xColumnText)(Fts5Context, int iCol, const char *pz, int pn);
	int (xColumnSize)(Fts5Context, int iCol, int *pnToken);

	int (xQueryPhrase)(Fts5Context, int iPhrase, void *pUserData,
	int()(const Fts5ExtensionApi,Fts5Context,void)
	);
	int (xSetAuxdata)(Fts5Context, void pAux, void(xDelete)(void*));
	void (xGetAuxdata)(Fts5Context*, int bClear);

	int (xPhraseFirst)(Fts5Context, int iPhrase, Fts5PhraseIter, int, int*);
	void (xPhraseNext)(Fts5Context, Fts5PhraseIter, int piCol, int *piOff);

	int (xPhraseFirstColumn)(Fts5Context, int iPhrase, Fts5PhraseIter, int);
	void (xPhraseNextColumn)(Fts5Context, Fts5PhraseIter, int piCol);
	};

	/*
	** CUSTOM AUXILIARY FUNCTIONS
	*************************************************************************/

	/*************************************************************************
	** CUSTOM TOKENIZERS
	**
	** Applications may also register custom tokenizer types. A tokenizer
	** is registered by providing fts5 with a populated instance of the
	** following structure. All structure methods must be defined, setting
	** any member of the fts5_tokenizer struct to NULL leads to undefined
	** behaviour. The structure methods are expected to function as follows:
	**
	** xCreate:
	** This function is used to allocate and initialize a tokenizer instance.
	** A tokenizer instance is required to actually tokenize text.
	**
	** The first argument passed to this function is a copy of the (void*)
	** pointer provided by the application when the fts5_tokenizer object
	** was registered with FTS5 (the third argument to xCreateTokenizer()).
	** The second and third arguments are an array of nul-terminated strings
	** containing the tokenizer arguments, if any, specified following the
	** tokenizer name as part of the CREATE VIRTUAL TABLE statement used
	** to create the FTS5 table.
	**
	** The final argument is an output variable. If successful, (*ppOut)
	** should be set to point to the new tokenizer handle and SQLITE_OK
	** returned. If an error occurs, some value other than SQLITE_OK should
	** be returned. In this case, fts5 assumes that the final value of *ppOut
	** is undefined.
	**
	** xDelete:
	** This function is invoked to delete a tokenizer handle previously
	** allocated using xCreate(). Fts5 guarantees that this function will
	** be invoked exactly once for each successful call to xCreate().
	**
	** xTokenize:
	** This function is expected to tokenize the nText byte string indicated
	** by argument pText. pText may or may not be nul-terminated. The first
	** argument passed to this function is a pointer to an Fts5Tokenizer object
	** returned by an earlier call to xCreate().
	**
	** The second argument indicates the reason that FTS5 is requesting
	** tokenization of the supplied text. This is always one of the following
	** four values:
	**
	** <ul><li> <b>FTS5_TOKENIZE_DOCUMENT</b> - A document is being inserted into
	** or removed from the FTS table. The tokenizer is being invoked to
	** determine the set of tokens to add to (or delete from) the
	** FTS index.
	**
	** <li> <b>FTS5_TOKENIZE_QUERY</b> - A MATCH query is being executed
	** against the FTS index. The tokenizer is being called to tokenize
	** a bareword or quoted string specified as part of the query.
	**
	** <li> <b>(FTS5_TOKENIZE_QUERY \| FTS5_TOKENIZE_PREFIX)</b> - Same as
	** FTS5_TOKENIZE_QUERY, except that the bareword or quoted string is
	** followed by a "*" character, indicating that the last token
	** returned by the tokenizer will be treated as a token prefix.
	**
	** <li> <b>FTS5_TOKENIZE_AUX</b> - The tokenizer is being invoked to
	** satisfy an fts5_api.xTokenize() request made by an auxiliary
	** function. Or an fts5_api.xColumnSize() request made by the same
	** on a columnsize=0 database.
	** </ul>
	**
	** For each token in the input string, the supplied callback xToken() must
	** be invoked. The first argument to it should be a copy of the pointer
	** passed as the second argument to xTokenize(). The third and fourth
	** arguments are a pointer to a buffer containing the token text, and the
	** size of the token in bytes. The 4th and 5th arguments are the byte offsets
	** of the first byte of and first byte immediately following the text from
	** which the token is derived within the input.
	**
	** The second argument passed to the xToken() callback ("tflags") should
	** normally be set to 0. The exception is if the tokenizer supports
	** synonyms. In this case see the discussion below for details.
	**
	** FTS5 assumes the xToken() callback is invoked for each token in the
	** order that they occur within the input text.
	**
	** If an xToken() callback returns any value other than SQLITE_OK, then
	** the tokenization should be abandoned and the xTokenize() method should
	** immediately return a copy of the xToken() return value. Or, if the
	** input buffer is exhausted, xTokenize() should return SQLITE_OK. Finally,
	** if an error occurs with the xTokenize() implementation itself, it
	** may abandon the tokenization and return any error code other than
	** SQLITE_OK or SQLITE_DONE.
	**
	** SYNONYM SUPPORT
	**
	** Custom tokenizers may also support synonyms. Consider a case in which a
	** user wishes to query for a phrase such as "first place". Using the
	** built-in tokenizers, the FTS5 query 'first + place' will match instances
	** of "first place" within the document set, but not alternative forms
	** such as "1st place". In some applications, it would be better to match
	** all instances of "first place" or "1st place" regardless of which form
	** the user specified in the MATCH query text.
	**
	** There are several ways to approach this in FTS5:
	**
	** <ol><li> By mapping all synonyms to a single token. In this case, the
	** In the above example, this means that the tokenizer returns the
	** same token for inputs "first" and "1st". Say that token is in
	** fact "first", so that when the user inserts the document "I won
	** 1st place" entries are added to the index for tokens "i", "won",
	** "first" and "place". If the user then queries for '1st + place',
	** the tokenizer substitutes "first" for "1st" and the query works
	** as expected.
	**
	** <li> By adding multiple synonyms for a single term to the FTS index.
	** In this case, when tokenizing query text, the tokenizer may
	** provide multiple synonyms for a single term within the document.
	** FTS5 then queries the index for each synonym individually. For
	** example, faced with the query:
	**
	** <codeblock>
	** ... MATCH 'first place'</codeblock>
	**
	** the tokenizer offers both "1st" and "first" as synonyms for the
	** first token in the MATCH query and FTS5 effectively runs a query
	** similar to:
	**
	** <codeblock>
	** ... MATCH '(first OR 1st) place'</codeblock>
	**
	** except that, for the purposes of auxiliary functions, the query
	** still appears to contain just two phrases - "(first OR 1st)"
	** being treated as a single phrase.
	**
	** <li> By adding multiple synonyms for a single term to the FTS index.
	** Using this method, when tokenizing document text, the tokenizer
	** provides multiple synonyms for each token. So that when a
	** document such as "I won first place" is tokenized, entries are
	** added to the FTS index for "i", "won", "first", "1st" and
	** "place".
	**
	** This way, even if the tokenizer does not provide synonyms
	** when tokenizing query text (it should not - to do would be
	** inefficient), it doesn't matter if the user queries for
	** 'first + place' or '1st + place', as there are entires in the
	** FTS index corresponding to both forms of the first token.
	** </ol>
	**
	** Whether it is parsing document or query text, any call to xToken that
	** specifies a <i>tflags</i> argument with the FTS5_TOKEN_COLOCATED bit
	** is considered to supply a synonym for the previous token. For example,
	** when parsing the document "I won first place", a tokenizer that supports
	** synonyms would call xToken() 5 times, as follows:
	**
	** <codeblock>
	** xToken(pCtx, 0, "i", 1, 0, 1);
	** xToken(pCtx, 0, "won", 3, 2, 5);
	** xToken(pCtx, 0, "first", 5, 6, 11);
	** xToken(pCtx, FTS5_TOKEN_COLOCATED, "1st", 3, 6, 11);
	** xToken(pCtx, 0, "place", 5, 12, 17);
	**</codeblock>
	**
	** It is an error to specify the FTS5_TOKEN_COLOCATED flag the first time
	** xToken() is called. Multiple synonyms may be specified for a single token
	** by making multiple calls to xToken(FTS5_TOKEN_COLOCATED) in sequence.
	** There is no limit to the number of synonyms that may be provided for a
	** single token.
	**
	** In many cases, method (1) above is the best approach. It does not add
	** extra data to the FTS index or require FTS5 to query for multiple terms,
	** so it is efficient in terms of disk space and query speed. However, it
	** does not support prefix queries very well. If, as suggested above, the
	** token "first" is subsituted for "1st" by the tokenizer, then the query:
	**
	** <codeblock>
	** ... MATCH '1s*'</codeblock>
	**
	** will not match documents that contain the token "1st" (as the tokenizer
	** will probably not map "1s" to any prefix of "first").
	**
	** For full prefix support, method (3) may be preferred. In this case,
	** because the index contains entries for both "first" and "1st", prefix
	** queries such as 'fi' or '1s' will match correctly. However, because
	** extra entries are added to the FTS index, this method uses more space
	** within the database.
	**
	** Method (2) offers a midpoint between (1) and (3). Using this method,
	** a query such as '1s*' will match documents that contain the literal
	** token "1st", but not "first" (assuming the tokenizer is not able to
	** provide synonyms for prefixes). However, a non-prefix query like '1st'
	** will match against "1st" and "first". This method does not require
	** extra disk space, as no extra entries are added to the FTS index.
	** On the other hand, it may require more CPU cycles to run MATCH queries,
	** as separate queries of the FTS index are required for each synonym.
	**
	** When using methods (2) or (3), it is important that the tokenizer only
	** provide synonyms when tokenizing document text (method (2)) or query
	** text (method (3)), not both. Doing so will not cause any errors, but is
	** inefficient.
	*/
	typedef struct Fts5Tokenizer Fts5Tokenizer;
	typedef struct fts5_tokenizer fts5_tokenizer;
	struct fts5_tokenizer {
	int (xCreate)(void, const char azArg, int nArg, Fts5Tokenizer ppOut);
	void (xDelete)(Fts5Tokenizer);
	int (xTokenize)(Fts5Tokenizer,
	void *pCtx,
	int flags, /* Mask of FTS5_TOKENIZE_* flags */
	const char *pText, int nText,
	int (*xToken)(
	void pCtx, / Copy of 2nd argument to xTokenize() */
	int tflags, /* Mask of FTS5_TOKEN_* flags */
	const char pToken, / Pointer to buffer containing token */
	int nToken, /* Size of token in bytes */
	int iStart, /* Byte offset of token within input text */
	int iEnd /* Byte offset of end of token within input text */
	)
	);
	};

	/* Flags that may be passed as the third argument to xTokenize() */
	#define FTS5_TOKENIZE_QUERY 0x0001
	#define FTS5_TOKENIZE_PREFIX 0x0002
	#define FTS5_TOKENIZE_DOCUMENT 0x0004
	#define FTS5_TOKENIZE_AUX 0x0008

	/* Flags that may be passed by the tokenizer implementation back to FTS5
	** as the third argument to the supplied xToken callback. */
	#define FTS5_TOKEN_COLOCATED 0x0001 /* Same position as prev. token */

	/*
	** END OF CUSTOM TOKENIZERS
	*************************************************************************/

	/*************************************************************************
	** FTS5 EXTENSION REGISTRATION API
	*/
	typedef struct fts5_api fts5_api;
	struct fts5_api {
	int iVersion; /* Currently always set to 2 */

	/* Create a new tokenizer */
	int (*xCreateTokenizer)(
	fts5_api *pApi,
	const char *zName,
	void *pContext,
	fts5_tokenizer *pTokenizer,
	void (xDestroy)(void)
	);

	/* Find an existing tokenizer */
	int (*xFindTokenizer)(
	fts5_api *pApi,
	const char *zName,
	void **ppContext,
	fts5_tokenizer *pTokenizer
	);

	/* Create a new auxiliary function */
	int (*xCreateFunction)(
	fts5_api *pApi,
	const char *zName,
	void *pContext,
	fts5_extension_function xFunction,
	void (xDestroy)(void)
	);
	};

	/*
	** END OF REGISTRATION API
	*************************************************************************/

	#ifdef __cplusplus
	} /* end of the 'extern "C"' block */
	#endif

	#endif /* _FTS5_H */

	/****** End of fts5.h *******/

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.3
changed lines
	Added in v.1.3.14.1