--- elwix/install2uboot.sh	2014/01/20 08:53:13	1.1
+++ elwix/install2uboot.sh	2014/09/15 19:06:42	1.2
@@ -0,0 +1,95 @@
+#!/bin/sh
+#
+# ELWIX install script for u-boot image
+#
+# (C) AITNET ltd - Sofia/Bulgaria <office@aitnet.org>
+#    by Michael Pounov <misho@elwix.org>
+#
+# $Id: install2uboot.sh,v 1.2 2014/09/15 19:06:42 misho Exp $
+#
+
+[ -r ./config/rc.elwix ] && . ./config/rc.elwix
+if [ X"${ELWIX_IS_CONFIGURED}" != X"YES" ]; then
+	echo
+	echo "ELWIX project is not configured !?!"
+	echo
+	exit 1
+fi
+
+if [ "${USER}" != "root" ]; then
+	echo
+	echo "ELWIX project is not configured - install must build under root !?!"
+	echo
+	exit 1
+fi
+
+if [ -z "${UB_LOADADDR}" ]; then
+	echo
+	echo "ELWIX project is not configured for u-boot use !?!"
+	echo
+	exit 1
+fi
+
+
+### main()
+
+if [ -z "$1" ]; then
+	echo
+	echo "Error:: ELWIX u-boot option not found ..."
+	echo
+	exit 2
+fi
+
+case $1 in
+	kernel)
+		oldlzma e ${KERNEL} ${REL}/kernel.${UB_COMPRESS}
+		uboot_mkimage -A ${TARGET} -O linux -T kernel -C ${UB_COMPRESS} -n ELWIX \
+			-a ${UB_LOADADDR} -e ${UB_ENTRYADDR} -d ${REL}/kernel.${UB_COMPRESS} \
+			${REL}/kernel.${UB_COMPRESS}.uImage
+		;;
+	kernel_rootfs)
+		oldlzma e ${KERNEL_ROOTFS} ${REL}/kernel_rootfs.${UB_COMPRESS}
+		uboot_mkimage -A ${TARGET} -O linux -T kernel -C ${UB_COMPRESS} -n ELWIX_ROOTFS \
+			-a ${UB_LOADADDR} -e ${UB_ENTRYADDR} -d ${REL}/kernel_rootfs.${UB_COMPRESS} \
+			${REL}/kernel_rootfs.${UB_COMPRESS}.uImage
+		;;
+	rootfs)
+		makefs -t ffs -B ${UB_ORDER} -f 1000 -s ${UB_ROOTFS_SIZE} \
+			-o "version=1,bsize=4096,fsize=512,minfree=0" \
+			${REL}/rootfs.dsk ${UBOOT_FS}
+		mkulzma -v -s 131072 -o ${REL}/rootfs.${UB_COMPRESS_ROOTFS} ${REL}/rootfs.dsk
+		;;
+	bin)
+		imgupd -ts ${UB_ROOTFS_NAND_SIZE} -f ${REL}/elwix_firmware.bin \
+		       	${REL}/rootfs.${UB_COMPRESS_ROOTFS}
+		imgupd -s ${UB_KERNEL_NAND_SIZE} -f ${REL}/elwix_firmware.bin \
+			${REL}/kernel.${UB_COMPRESS}.uImage
+
+#		dd bs=65536 count=$((${UB_ROOTFS_NAND_SIZE} + ${UB_KERNEL_NAND_SIZE})) \
+#			if=/dev/zero of=${REL}/elwix_firmware.bin
+#		dd bs=65536 count=${UB_ROOTFS_NAND_SIZE} conv=sync,notrunc \
+#			if=${REL}/rootfs.${UB_COMPRESS_ROOTFS} \
+#			of=${REL}/elwix_firmware.bin
+#		dd bs=65536 count=${UB_KERNEL_NAND_SIZE} conv=sync,notrunc seek=${UB_ROOTFS_NAND_SIZE} \
+#			if=${REL}/kernel.${UB_COMPRESS}.uImage \
+#			of=${REL}/elwix_firmware.bin
+		;;
+	vendor)
+		if [ ! -r "${3:-./elwix_cfg.bin}" ]; then
+			echo "elwix_cfg.bin not found!"
+			exit 1
+		fi
+
+		imgupd -ts ${UB_ROOTFS_NAND_SIZE} -f ${REL}/elwix_firmware_${2:-vendor}.bin \
+		       	${REL}/rootfs.${UB_COMPRESS_ROOTFS}
+		imgupd -s ${UB_KERNEL_NAND_SIZE} -f ${REL}/elwix_firmware_${2:-vendor}.bin \
+			${REL}/kernel.${UB_COMPRESS}.uImage
+		imgupd -s ${UB_CFG_NAND_SIZE} -f ${REL}/elwix_firmware_${2:-vendor}.bin \
+			${3:-./elwix_cfg.bin}
+		;;
+	*)
+		echo "Option $1 not supported at this moment"
+		;;
+esac
+
+echo "ELWIX u-boot image $1 complete."