Annotation of embedaddon/arping/doc/Makefile.in, revision 1.1.1.2
1.1.1.2 ! misho 1: # Makefile.in generated by automake 1.11.6 from Makefile.am.
1.1 misho 2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
1.1.1.2 ! misho 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
! 6: # Foundation, Inc.
1.1 misho 7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
1.1.1.2 ! misho 18: am__make_dryrun = \
! 19: { \
! 20: am__dry=no; \
! 21: case $$MAKEFLAGS in \
! 22: *\\[\ \ ]*) \
! 23: echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
! 24: | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
! 25: *) \
! 26: for am__flg in $$MAKEFLAGS; do \
! 27: case $$am__flg in \
! 28: *=*|--*) ;; \
! 29: *n*) am__dry=yes; break;; \
! 30: esac; \
! 31: done;; \
! 32: esac; \
! 33: test $$am__dry = yes; \
! 34: }
1.1 misho 35: pkgdatadir = $(datadir)/@PACKAGE@
36: pkgincludedir = $(includedir)/@PACKAGE@
1.1.1.2 ! misho 37: pkglibdir = $(libdir)/@PACKAGE@
! 38: pkglibexecdir = $(libexecdir)/@PACKAGE@
1.1 misho 39: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
40: install_sh_DATA = $(install_sh) -c -m 644
41: install_sh_PROGRAM = $(install_sh) -c
42: install_sh_SCRIPT = $(install_sh) -c
43: INSTALL_HEADER = $(INSTALL_DATA)
44: transform = $(program_transform_name)
45: NORMAL_INSTALL = :
46: PRE_INSTALL = :
47: POST_INSTALL = :
48: NORMAL_UNINSTALL = :
49: PRE_UNINSTALL = :
50: POST_UNINSTALL = :
51: build_triplet = @build@
52: host_triplet = @host@
53: target_triplet = @target@
54: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
55: $(top_srcdir)/Makefile.am.common
56: subdir = doc
57: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
58: am__aclocal_m4_deps = $(top_srcdir)/configure.ac
59: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
60: $(ACLOCAL_M4)
61: mkinstalldirs = $(install_sh) -d
62: CONFIG_HEADER = $(top_builddir)/config.h
63: CONFIG_CLEAN_FILES =
1.1.1.2 ! misho 64: CONFIG_CLEAN_VPATH_FILES =
1.1 misho 65: SOURCES =
66: DIST_SOURCES =
1.1.1.2 ! misho 67: am__can_run_installinfo = \
! 68: case $$AM_UPDATE_INFO_DIR in \
! 69: n|no|NO) false;; \
! 70: *) (install-info --version) >/dev/null 2>&1;; \
! 71: esac
! 72: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
! 73: am__vpath_adj = case $$p in \
! 74: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
! 75: *) f=$$p;; \
! 76: esac;
! 77: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
! 78: am__install_max = 40
! 79: am__nobase_strip_setup = \
! 80: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
! 81: am__nobase_strip = \
! 82: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
! 83: am__nobase_list = $(am__nobase_strip_setup); \
! 84: for p in $$list; do echo "$$p $$p"; done | \
! 85: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
! 86: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
! 87: if (++n[$$2] == $(am__install_max)) \
! 88: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
! 89: END { for (dir in files) print dir, files[dir] }'
! 90: am__base_list = \
! 91: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
! 92: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
! 93: am__uninstall_files_from_dir = { \
! 94: test -z "$$files" \
! 95: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
! 96: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
! 97: $(am__cd) "$$dir" && rm -f $$files; }; \
! 98: }
1.1 misho 99: man8dir = $(mandir)/man8
100: am__installdirs = "$(DESTDIR)$(man8dir)"
101: NROFF = nroff
102: MANS = $(man_MANS)
103: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
104: ACLOCAL = @ACLOCAL@
105: AMTAR = @AMTAR@
106: AUTOCONF = @AUTOCONF@
107: AUTOHEADER = @AUTOHEADER@
108: AUTOMAKE = @AUTOMAKE@
109: AWK = @AWK@
110: CC = @CC@
111: CCDEPMODE = @CCDEPMODE@
112: CFLAGS = @CFLAGS@
113: CPP = @CPP@
114: CPPFLAGS = @CPPFLAGS@
115: CYGPATH_W = @CYGPATH_W@
116: DEFS = @DEFS@
117: DEPDIR = @DEPDIR@
118: ECHO_C = @ECHO_C@
119: ECHO_N = @ECHO_N@
120: ECHO_T = @ECHO_T@
121: EGREP = @EGREP@
122: EXEEXT = @EXEEXT@
123: GREP = @GREP@
124: INSTALL = @INSTALL@
125: INSTALL_DATA = @INSTALL_DATA@
126: INSTALL_PROGRAM = @INSTALL_PROGRAM@
127: INSTALL_SCRIPT = @INSTALL_SCRIPT@
128: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
129: LDFLAGS = @LDFLAGS@
130: LIBOBJS = @LIBOBJS@
131: LIBS = @LIBS@
132: LTLIBOBJS = @LTLIBOBJS@
133: MAINT = @MAINT@
134: MAKEINFO = @MAKEINFO@
135: MKDIR_P = @MKDIR_P@
136: OBJEXT = @OBJEXT@
137: PACKAGE = @PACKAGE@
138: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
139: PACKAGE_NAME = @PACKAGE_NAME@
140: PACKAGE_STRING = @PACKAGE_STRING@
141: PACKAGE_TARNAME = @PACKAGE_TARNAME@
1.1.1.2 ! misho 142: PACKAGE_URL = @PACKAGE_URL@
1.1 misho 143: PACKAGE_VERSION = @PACKAGE_VERSION@
144: PATH_SEPARATOR = @PATH_SEPARATOR@
145: SET_MAKE = @SET_MAKE@
146: SHELL = @SHELL@
147: STRIP = @STRIP@
148: VERSION = @VERSION@
149: abs_builddir = @abs_builddir@
150: abs_srcdir = @abs_srcdir@
151: abs_top_builddir = @abs_top_builddir@
152: abs_top_srcdir = @abs_top_srcdir@
153: ac_ct_CC = @ac_ct_CC@
154: am__include = @am__include@
155: am__leading_dot = @am__leading_dot@
156: am__quote = @am__quote@
157: am__tar = @am__tar@
158: am__untar = @am__untar@
159: bindir = @bindir@
160: build = @build@
161: build_alias = @build_alias@
162: build_cpu = @build_cpu@
163: build_os = @build_os@
164: build_vendor = @build_vendor@
165: builddir = @builddir@
166: datadir = @datadir@
167: datarootdir = @datarootdir@
168: docdir = @docdir@
169: dvidir = @dvidir@
170: exec_prefix = @exec_prefix@
171: host = @host@
172: host_alias = @host_alias@
173: host_cpu = @host_cpu@
174: host_os = @host_os@
175: host_vendor = @host_vendor@
176: htmldir = @htmldir@
177: includedir = @includedir@
178: infodir = @infodir@
179: install_sh = @install_sh@
180: libdir = @libdir@
181: libexecdir = @libexecdir@
182: localedir = @localedir@
183: localstatedir = @localstatedir@
184: mandir = @mandir@
185: mkdir_p = @mkdir_p@
186: oldincludedir = @oldincludedir@
187: pdfdir = @pdfdir@
188: prefix = @prefix@
189: program_transform_name = @program_transform_name@
190: psdir = @psdir@
191: sbindir = @sbindir@
192: sharedstatedir = @sharedstatedir@
193: srcdir = @srcdir@
194: sysconfdir = @sysconfdir@
195: target = @target@
196: target_alias = @target_alias@
197: target_cpu = @target_cpu@
198: target_os = @target_os@
199: target_vendor = @target_vendor@
1.1.1.2 ! misho 200: top_build_prefix = @top_build_prefix@
1.1 misho 201: top_builddir = @top_builddir@
202: top_srcdir = @top_srcdir@
203:
204: # arping/Makefile.am.common
205: AUTOMAKE_OPTIONS = foreign
206: DISTCLEANFILES = *~
207:
208: # arping/doc/Makefile.am
209: #
1.1.1.2 ! misho 210:
! 211: # Manpage is only run by maintainer, not by end user. That's why there
! 212: # is no dependency on arping.yodl.
1.1 misho 213: man_MANS = arping.8
214: all: all-am
215:
216: .SUFFIXES:
217: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.common $(am__configure_deps)
218: @for dep in $?; do \
219: case '$(am__configure_deps)' in \
220: *$$dep*) \
1.1.1.2 ! misho 221: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 222: && { if test -f $@; then exit 0; else break; fi; }; \
1.1 misho 223: exit 1;; \
224: esac; \
225: done; \
1.1.1.2 ! misho 226: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
! 227: $(am__cd) $(top_srcdir) && \
! 228: $(AUTOMAKE) --foreign doc/Makefile
1.1 misho 229: .PRECIOUS: Makefile
230: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
231: @case '$?' in \
232: *config.status*) \
233: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
234: *) \
235: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
236: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
237: esac;
1.1.1.2 ! misho 238: $(top_srcdir)/Makefile.am.common:
1.1 misho 239:
240: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
241: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
242:
243: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
244: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
245: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
246: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
1.1.1.2 ! misho 247: $(am__aclocal_m4_deps):
! 248: install-man8: $(man_MANS)
1.1 misho 249: @$(NORMAL_INSTALL)
1.1.1.2 ! misho 250: @list1=''; \
! 251: list2='$(man_MANS)'; \
! 252: test -n "$(man8dir)" \
! 253: && test -n "`echo $$list1$$list2`" \
! 254: || exit 0; \
! 255: echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
! 256: $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
! 257: { for i in $$list1; do echo "$$i"; done; \
! 258: if test -n "$$list2"; then \
! 259: for i in $$list2; do echo "$$i"; done \
! 260: | sed -n '/\.8[a-z]*$$/p'; \
! 261: fi; \
! 262: } | while read p; do \
! 263: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
! 264: echo "$$d$$p"; echo "$$p"; \
! 265: done | \
! 266: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
! 267: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
! 268: sed 'N;N;s,\n, ,g' | { \
! 269: list=; while read file base inst; do \
! 270: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
! 271: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
! 272: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
! 273: fi; \
1.1 misho 274: done; \
1.1.1.2 ! misho 275: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
! 276: while read files; do \
! 277: test -z "$$files" || { \
! 278: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
! 279: $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
! 280: done; }
! 281:
1.1 misho 282: uninstall-man8:
283: @$(NORMAL_UNINSTALL)
1.1.1.2 ! misho 284: @list=''; test -n "$(man8dir)" || exit 0; \
! 285: files=`{ for i in $$list; do echo "$$i"; done; \
! 286: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
! 287: sed -n '/\.8[a-z]*$$/p'; \
! 288: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
! 289: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
! 290: dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
1.1 misho 291: tags: TAGS
292: TAGS:
293:
294: ctags: CTAGS
295: CTAGS:
296:
297:
298: distdir: $(DISTFILES)
1.1.1.2 ! misho 299: @list='$(MANS)'; if test -n "$$list"; then \
! 300: list=`for p in $$list; do \
! 301: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
! 302: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
! 303: if test -n "$$list" && \
! 304: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
! 305: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
! 306: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
! 307: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
! 308: echo " typically \`make maintainer-clean' will remove them" >&2; \
! 309: exit 1; \
! 310: else :; fi; \
! 311: else :; fi
1.1 misho 312: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
313: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
314: list='$(DISTFILES)'; \
315: dist_files=`for file in $$list; do echo $$file; done | \
316: sed -e "s|^$$srcdirstrip/||;t" \
317: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
318: case $$dist_files in \
319: */*) $(MKDIR_P) `echo "$$dist_files" | \
320: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
321: sort -u` ;; \
322: esac; \
323: for file in $$dist_files; do \
324: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
325: if test -d $$d/$$file; then \
326: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1.1.1.2 ! misho 327: if test -d "$(distdir)/$$file"; then \
! 328: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 329: fi; \
1.1 misho 330: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1.1.1.2 ! misho 331: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 332: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1.1 misho 333: fi; \
1.1.1.2 ! misho 334: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1.1 misho 335: else \
1.1.1.2 ! misho 336: test -f "$(distdir)/$$file" \
! 337: || cp -p $$d/$$file "$(distdir)/$$file" \
1.1 misho 338: || exit 1; \
339: fi; \
340: done
341: check-am: all-am
342: check: check-am
343: all-am: Makefile $(MANS)
344: installdirs:
345: for dir in "$(DESTDIR)$(man8dir)"; do \
346: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
347: done
348: install: install-am
349: install-exec: install-exec-am
350: install-data: install-data-am
351: uninstall: uninstall-am
352:
353: install-am: all-am
354: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
355:
356: installcheck: installcheck-am
357: install-strip:
1.1.1.2 ! misho 358: if test -z '$(STRIP)'; then \
! 359: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 360: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 361: install; \
! 362: else \
! 363: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 364: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 365: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
! 366: fi
1.1 misho 367: mostlyclean-generic:
368:
369: clean-generic:
370:
371: distclean-generic:
372: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1.1.1.2 ! misho 373: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1.1 misho 374: -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
375:
376: maintainer-clean-generic:
377: @echo "This command is intended for maintainers to use"
378: @echo "it deletes files that may require special tools to rebuild."
379: clean: clean-am
380:
381: clean-am: clean-generic mostlyclean-am
382:
383: distclean: distclean-am
384: -rm -f Makefile
385: distclean-am: clean-am distclean-generic
386:
387: dvi: dvi-am
388:
389: dvi-am:
390:
391: html: html-am
392:
1.1.1.2 ! misho 393: html-am:
! 394:
1.1 misho 395: info: info-am
396:
397: info-am:
398:
399: install-data-am: install-man
400:
401: install-dvi: install-dvi-am
402:
1.1.1.2 ! misho 403: install-dvi-am:
! 404:
1.1 misho 405: install-exec-am:
406:
407: install-html: install-html-am
408:
1.1.1.2 ! misho 409: install-html-am:
! 410:
1.1 misho 411: install-info: install-info-am
412:
1.1.1.2 ! misho 413: install-info-am:
! 414:
1.1 misho 415: install-man: install-man8
416:
417: install-pdf: install-pdf-am
418:
1.1.1.2 ! misho 419: install-pdf-am:
! 420:
1.1 misho 421: install-ps: install-ps-am
422:
1.1.1.2 ! misho 423: install-ps-am:
! 424:
1.1 misho 425: installcheck-am:
426:
427: maintainer-clean: maintainer-clean-am
428: -rm -f Makefile
429: maintainer-clean-am: distclean-am maintainer-clean-generic
430:
431: mostlyclean: mostlyclean-am
432:
433: mostlyclean-am: mostlyclean-generic
434:
435: pdf: pdf-am
436:
437: pdf-am:
438:
439: ps: ps-am
440:
441: ps-am:
442:
443: uninstall-am: uninstall-man
444:
445: uninstall-man: uninstall-man8
446:
447: .MAKE: install-am install-strip
448:
449: .PHONY: all all-am check check-am clean clean-generic distclean \
450: distclean-generic distdir dvi dvi-am html html-am info info-am \
451: install install-am install-data install-data-am install-dvi \
452: install-dvi-am install-exec install-exec-am install-html \
453: install-html-am install-info install-info-am install-man \
454: install-man8 install-pdf install-pdf-am install-ps \
455: install-ps-am install-strip installcheck installcheck-am \
456: installdirs maintainer-clean maintainer-clean-generic \
457: mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
458: uninstall-am uninstall-man uninstall-man8
459:
460: arping.8:
1.1.1.2 ! misho 461: yodl2man -o arping.8.tmp arping.yodl
! 462: perl -ne 's/(^|(?<=[^\\\w]))-/\\-/g;print' < arping.8.tmp > arping.8
! 463: rm -f arping.8.tmp
! 464:
1.1 misho 465: # Tell versions [3.59,3.63) of GNU make to not export all variables.
466: # Otherwise a system limit (for SysV at least) may be exceeded.
467: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / arping / doc