Annotation of embedaddon/confuse/INSTALL, revision 1.1.1.1

1.1       misho       1: Basic Installation
                      2: ==================
                      3: 
                      4:    These are generic installation instructions.
                      5: 
                      6:    The `configure' shell script attempts to guess correct values for
                      7: various system-dependent variables used during compilation.  It uses
                      8: those values to create a `Makefile' in each directory of the package.
                      9: It may also create one or more `.h' files containing system-dependent
                     10: definitions.  Finally, it creates a shell script `config.status' that
                     11: you can run in the future to recreate the current configuration, a file
                     12: `config.cache' that saves the results of its tests to speed up
                     13: reconfiguring, and a file `config.log' containing compiler output
                     14: (useful mainly for debugging `configure').
                     15: 
                     16:    If you need to do unusual things to compile the package, please try
                     17: to figure out how `configure' could check whether to do them, and mail
                     18: diffs or instructions to the address given in the `README' so they can
                     19: be considered for the next release.  If at some point `config.cache'
                     20: contains results you don't want to keep, you may remove or edit it.
                     21: 
                     22:    The file `configure.in' is used to create `configure' by a program
                     23: called `autoconf'.  You only need `configure.in' if you want to change
                     24: it or regenerate `configure' using a newer version of `autoconf'.
                     25: 
                     26: The simplest way to compile this package is:
                     27: 
                     28:   1. `cd' to the directory containing the package's source code and type
                     29:      `./configure' to configure the package for your system.  If you're
                     30:      using `csh' on an old version of System V, you might need to type
                     31:      `sh ./configure' instead to prevent `csh' from trying to execute
                     32:      `configure' itself.
                     33: 
                     34:      Running `configure' takes awhile.  While running, it prints some
                     35:      messages telling which features it is checking for.
                     36: 
                     37:   2. Type `make' to compile the package.
                     38: 
                     39:   3. Optionally, type `make check' to run any self-tests that come with
                     40:      the package.
                     41: 
                     42:   4. Type `make install' to install the programs and any data files and
                     43:      documentation.
                     44: 
                     45:   5. You can remove the program binaries and object files from the
                     46:      source code directory by typing `make clean'.  To also remove the
                     47:      files that `configure' created (so you can compile the package for
                     48:      a different kind of computer), type `make distclean'.  There is
                     49:      also a `make maintainer-clean' target, but that is intended mainly
                     50:      for the package's developers.  If you use it, you may have to get
                     51:      all sorts of other programs in order to regenerate files that came
                     52:      with the distribution.
                     53: 
                     54: Compilers and Options
                     55: =====================
                     56: 
                     57:    Some systems require unusual options for compilation or linking that
                     58: the `configure' script does not know about.  You can give `configure'
                     59: initial values for variables by setting them in the environment.  Using
                     60: a Bourne-compatible shell, you can do that on the command line like
                     61: this:
                     62:      CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
                     63: 
                     64: Or on systems that have the `env' program, you can do it like this:
                     65:      env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
                     66: 
                     67: Compiling For Multiple Architectures
                     68: ====================================
                     69: 
                     70:    You can compile the package for more than one kind of computer at the
                     71: same time, by placing the object files for each architecture in their
                     72: own directory.  To do this, you must use a version of `make' that
                     73: supports the `VPATH' variable, such as GNU `make'.  `cd' to the
                     74: directory where you want the object files and executables to go and run
                     75: the `configure' script.  `configure' automatically checks for the
                     76: source code in the directory that `configure' is in and in `..'.
                     77: 
                     78:    If you have to use a `make' that does not supports the `VPATH'
                     79: variable, you have to compile the package for one architecture at a time
                     80: in the source code directory.  After you have installed the package for
                     81: one architecture, use `make distclean' before reconfiguring for another
                     82: architecture.
                     83: 
                     84: Installation Names
                     85: ==================
                     86: 
                     87:    By default, `make install' will install the package's files in
                     88: `/usr/local/bin', `/usr/local/man', etc.  You can specify an
                     89: installation prefix other than `/usr/local' by giving `configure' the
                     90: option `--prefix=PATH'.
                     91: 
                     92:    You can specify separate installation prefixes for
                     93: architecture-specific files and architecture-independent files.  If you
                     94: give `configure' the option `--exec-prefix=PATH', the package will use
                     95: PATH as the prefix for installing programs and libraries.
                     96: Documentation and other data files will still use the regular prefix.
                     97: 
                     98:    In addition, if you use an unusual directory layout you can give
                     99: options like `--bindir=PATH' to specify different values for particular
                    100: kinds of files.  Run `configure --help' for a list of the directories
                    101: you can set and what kinds of files go in them.
                    102: 
                    103:    If the package supports it, you can cause programs to be installed
                    104: with an extra prefix or suffix on their names by giving `configure' the
                    105: option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
                    106: 
                    107: Optional Features
                    108: =================
                    109: 
                    110:    Some packages pay attention to `--enable-FEATURE' options to
                    111: `configure', where FEATURE indicates an optional part of the package.
                    112: They may also pay attention to `--with-PACKAGE' options, where PACKAGE
                    113: is something like `gnu-as' or `x' (for the X Window System).  The
                    114: `README' should mention any `--enable-' and `--with-' options that the
                    115: package recognizes.
                    116: 
                    117:    For packages that use the X Window System, `configure' can usually
                    118: find the X include and library files automatically, but if it doesn't,
                    119: you can use the `configure' options `--x-includes=DIR' and
                    120: `--x-libraries=DIR' to specify their locations.
                    121: 
                    122: Specifying the System Type
                    123: ==========================
                    124: 
                    125:    There may be some features `configure' can not figure out
                    126: automatically, but needs to determine by the type of host the package
                    127: will run on.  Usually `configure' can figure that out, but if it prints
                    128: a message saying it can not guess the host type, give it the
                    129: `--host=TYPE' option.  TYPE can either be a short name for the system
                    130: type, such as `sun4', or a canonical name with three fields:
                    131:      CPU-COMPANY-SYSTEM
                    132: 
                    133: See the file `config.sub' for the possible values of each field.  If
                    134: `config.sub' isn't included in this package, then this package doesn't
                    135: need to know the host type.
                    136: 
                    137:    If you are building compiler tools for cross-compiling, you can also
                    138: use the `--target=TYPE' option to select the type of system they will
                    139: produce code for and the `--build=TYPE' option to select the type of
                    140: system on which you are compiling the package.
                    141: 
                    142: Sharing Defaults
                    143: ================
                    144: 
                    145:    If you want to set default values for `configure' scripts to share,
                    146: you can create a site shell script called `config.site' that gives
                    147: default values for variables like `CC', `cache_file', and `prefix'.
                    148: `configure' looks for `PREFIX/share/config.site' if it exists, then
                    149: `PREFIX/etc/config.site' if it exists.  Or, you can set the
                    150: `CONFIG_SITE' environment variable to the location of the site script.
                    151: A warning: not all `configure' scripts look for a site script.
                    152: 
                    153: Operation Controls
                    154: ==================
                    155: 
                    156:    `configure' recognizes the following options to control how it
                    157: operates.
                    158: 
                    159: `--cache-file=FILE'
                    160:      Use and save the results of the tests in FILE instead of
                    161:      `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
                    162:      debugging `configure'.
                    163: 
                    164: `--help'
                    165:      Print a summary of the options to `configure', and exit.
                    166: 
                    167: `--quiet'
                    168: `--silent'
                    169: `-q'
                    170:      Do not print messages saying which checks are being made.  To
                    171:      suppress all normal output, redirect it to `/dev/null' (any error
                    172:      messages will still be shown).
                    173: 
                    174: `--srcdir=DIR'
                    175:      Look for the package's source code in directory DIR.  Usually
                    176:      `configure' can determine that directory automatically.
                    177: 
                    178: `--version'
                    179:      Print the version of Autoconf used to generate the `configure'
                    180:      script, and exit.
                    181: 
                    182: `configure' also accepts some other, not widely useful, options.

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>