Annotation of embedaddon/confuse/Makefile.in, revision 1.1.1.2
1.1.1.2 ! misho 1: # Makefile.in generated by automake 1.16.1 from Makefile.am.
1.1 misho 2: # @configure_input@
3:
1.1.1.2 ! misho 4: # Copyright (C) 1994-2018 Free Software Foundation, Inc.
! 5:
1.1 misho 6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
14:
15: @SET_MAKE@
16:
17: VPATH = @srcdir@
1.1.1.2 ! misho 18: am__is_gnu_make = { \
! 19: if test -z '$(MAKELEVEL)'; then \
! 20: false; \
! 21: elif test -n '$(MAKE_HOST)'; then \
! 22: true; \
! 23: elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
! 24: true; \
! 25: else \
! 26: false; \
! 27: fi; \
! 28: }
! 29: am__make_running_with_option = \
! 30: case $${target_option-} in \
! 31: ?) ;; \
! 32: *) echo "am__make_running_with_option: internal error: invalid" \
! 33: "target option '$${target_option-}' specified" >&2; \
! 34: exit 1;; \
! 35: esac; \
! 36: has_opt=no; \
! 37: sane_makeflags=$$MAKEFLAGS; \
! 38: if $(am__is_gnu_make); then \
! 39: sane_makeflags=$$MFLAGS; \
! 40: else \
! 41: case $$MAKEFLAGS in \
! 42: *\\[\ \ ]*) \
! 43: bs=\\; \
! 44: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
! 45: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
! 46: esac; \
! 47: fi; \
! 48: skip_next=no; \
! 49: strip_trailopt () \
! 50: { \
! 51: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
! 52: }; \
! 53: for flg in $$sane_makeflags; do \
! 54: test $$skip_next = yes && { skip_next=no; continue; }; \
! 55: case $$flg in \
! 56: *=*|--*) continue;; \
! 57: -*I) strip_trailopt 'I'; skip_next=yes;; \
! 58: -*I?*) strip_trailopt 'I';; \
! 59: -*O) strip_trailopt 'O'; skip_next=yes;; \
! 60: -*O?*) strip_trailopt 'O';; \
! 61: -*l) strip_trailopt 'l'; skip_next=yes;; \
! 62: -*l?*) strip_trailopt 'l';; \
! 63: -[dEDm]) skip_next=yes;; \
! 64: -[JT]) skip_next=yes;; \
! 65: esac; \
! 66: case $$flg in \
! 67: *$$target_option*) has_opt=yes; break;; \
! 68: esac; \
! 69: done; \
! 70: test $$has_opt = yes
! 71: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
! 72: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
1.1 misho 73: pkgdatadir = $(datadir)/@PACKAGE@
74: pkgincludedir = $(includedir)/@PACKAGE@
75: pkglibdir = $(libdir)/@PACKAGE@
76: pkglibexecdir = $(libexecdir)/@PACKAGE@
77: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78: install_sh_DATA = $(install_sh) -c -m 644
79: install_sh_PROGRAM = $(install_sh) -c
80: install_sh_SCRIPT = $(install_sh) -c
81: INSTALL_HEADER = $(INSTALL_DATA)
82: transform = $(program_transform_name)
83: NORMAL_INSTALL = :
84: PRE_INSTALL = :
85: POST_INSTALL = :
86: NORMAL_UNINSTALL = :
87: PRE_UNINSTALL = :
88: POST_UNINSTALL = :
89: build_triplet = @build@
90: host_triplet = @host@
91: @ENABLE_EXAMPLES_TRUE@am__append_1 = examples
92: subdir = .
93: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
94: am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
1.1.1.2 ! misho 95: $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
! 96: $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
! 97: $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
! 98: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
! 99: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
! 100: $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
! 101: $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
1.1 misho 102: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
103: $(ACLOCAL_M4)
1.1.1.2 ! misho 104: DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
! 105: $(am__configure_deps) $(am__DIST_COMMON)
1.1 misho 106: am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
107: configure.lineno config.status.lineno
108: mkinstalldirs = $(install_sh) -d
109: CONFIG_HEADER = config.h
110: CONFIG_CLEAN_FILES = libconfuse.pc libconfuse.spec
111: CONFIG_CLEAN_VPATH_FILES =
1.1.1.2 ! misho 112: AM_V_P = $(am__v_P_@AM_V@)
! 113: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
! 114: am__v_P_0 = false
! 115: am__v_P_1 = :
! 116: AM_V_GEN = $(am__v_GEN_@AM_V@)
! 117: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
! 118: am__v_GEN_0 = @echo " GEN " $@;
! 119: am__v_GEN_1 =
! 120: AM_V_at = $(am__v_at_@AM_V@)
! 121: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
! 122: am__v_at_0 = @
! 123: am__v_at_1 =
1.1 misho 124: SOURCES =
125: DIST_SOURCES =
1.1.1.2 ! misho 126: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
! 127: ctags-recursive dvi-recursive html-recursive info-recursive \
! 128: install-data-recursive install-dvi-recursive \
! 129: install-exec-recursive install-html-recursive \
! 130: install-info-recursive install-pdf-recursive \
! 131: install-ps-recursive install-recursive installcheck-recursive \
! 132: installdirs-recursive pdf-recursive ps-recursive \
! 133: tags-recursive uninstall-recursive
! 134: am__can_run_installinfo = \
! 135: case $$AM_UPDATE_INFO_DIR in \
! 136: n|no|NO) false;; \
! 137: *) (install-info --version) >/dev/null 2>&1;; \
! 138: esac
1.1 misho 139: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
140: am__vpath_adj = case $$p in \
141: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
142: *) f=$$p;; \
143: esac;
144: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
145: am__install_max = 40
146: am__nobase_strip_setup = \
147: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
148: am__nobase_strip = \
149: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
150: am__nobase_list = $(am__nobase_strip_setup); \
151: for p in $$list; do echo "$$p $$p"; done | \
152: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
153: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
154: if (++n[$$2] == $(am__install_max)) \
155: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
156: END { for (dir in files) print dir, files[dir] }'
157: am__base_list = \
158: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
159: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
1.1.1.2 ! misho 160: am__uninstall_files_from_dir = { \
! 161: test -z "$$files" \
! 162: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
! 163: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
! 164: $(am__cd) "$$dir" && rm -f $$files; }; \
! 165: }
! 166: am__installdirs = "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgconfigdir)"
! 167: DATA = $(doc_DATA) $(pkgconfig_DATA)
1.1 misho 168: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
169: distclean-recursive maintainer-clean-recursive
1.1.1.2 ! misho 170: am__recursive_targets = \
! 171: $(RECURSIVE_TARGETS) \
! 172: $(RECURSIVE_CLEAN_TARGETS) \
! 173: $(am__extra_recursive_targets)
! 174: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
! 175: cscope distdir distdir-am dist dist-all distcheck
! 176: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
! 177: $(LISP)config.h.in
! 178: # Read a list of newline-separated strings from the standard input,
! 179: # and print each of them once, without duplicates. Input order is
! 180: # *not* preserved.
! 181: am__uniquify_input = $(AWK) '\
! 182: BEGIN { nonempty = 0; } \
! 183: { items[$$0] = 1; nonempty = 1; } \
! 184: END { if (nonempty) { for (i in items) print i; }; } \
! 185: '
! 186: # Make sure the list of sources is unique. This is necessary because,
! 187: # e.g., the same source file might be shared among _SOURCES variables
! 188: # for different programs/libraries.
! 189: am__define_uniq_tagged_files = \
! 190: list='$(am__tagged_files)'; \
! 191: unique=`for i in $$list; do \
! 192: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 193: done | $(am__uniquify_input)`
1.1 misho 194: ETAGS = etags
195: CTAGS = ctags
1.1.1.2 ! misho 196: CSCOPE = cscope
1.1 misho 197: DIST_SUBDIRS = m4 po src examples tests doc
1.1.1.2 ! misho 198: am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
! 199: $(srcdir)/libconfuse.pc.in $(srcdir)/libconfuse.spec.in \
! 200: $(top_srcdir)/support/ar-lib $(top_srcdir)/support/compile \
! 201: $(top_srcdir)/support/config.guess \
! 202: $(top_srcdir)/support/config.rpath \
! 203: $(top_srcdir)/support/config.sub \
! 204: $(top_srcdir)/support/install-sh \
! 205: $(top_srcdir)/support/ltmain.sh $(top_srcdir)/support/missing \
! 206: ABOUT-NLS AUTHORS INSTALL support/ar-lib support/compile \
! 207: support/config.guess support/config.rpath support/config.sub \
! 208: support/depcomp support/install-sh support/ltmain.sh \
! 209: support/missing support/ylwrap
1.1 misho 210: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
211: distdir = $(PACKAGE)-$(VERSION)
212: top_distdir = $(distdir)
213: am__remove_distdir = \
1.1.1.2 ! misho 214: if test -d "$(distdir)"; then \
! 215: find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
! 216: && rm -rf "$(distdir)" \
! 217: || { sleep 5 && rm -rf "$(distdir)"; }; \
! 218: else :; fi
! 219: am__post_remove_distdir = $(am__remove_distdir)
1.1 misho 220: am__relativize = \
221: dir0=`pwd`; \
222: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
223: sed_rest='s,^[^/]*/*,,'; \
224: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
225: sed_butlast='s,/*[^/]*$$,,'; \
226: while test -n "$$dir1"; do \
227: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
228: if test "$$first" != "."; then \
229: if test "$$first" = ".."; then \
230: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
231: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
232: else \
233: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
234: if test "$$first2" = "$$first"; then \
235: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
236: else \
237: dir2="../$$dir2"; \
238: fi; \
239: dir0="$$dir0"/"$$first"; \
240: fi; \
241: fi; \
242: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
243: done; \
244: reldir="$$dir2"
1.1.1.2 ! misho 245: DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
1.1 misho 246: GZIP_ENV = --best
1.1.1.2 ! misho 247: DIST_TARGETS = dist-xz dist-gzip
1.1 misho 248: distuninstallcheck_listfiles = find . -type f -print
1.1.1.2 ! misho 249: am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
! 250: | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
1.1 misho 251: distcleancheck_listfiles = find . -type f -print
252: ACLOCAL = @ACLOCAL@
253: AMTAR = @AMTAR@
1.1.1.2 ! misho 254: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
1.1 misho 255: AR = @AR@
1.1.1.2 ! misho 256: AS = @AS@
1.1 misho 257: AUTOCONF = @AUTOCONF@
258: AUTOHEADER = @AUTOHEADER@
259: AUTOMAKE = @AUTOMAKE@
260: AWK = @AWK@
261: CC = @CC@
262: CCDEPMODE = @CCDEPMODE@
263: CFLAGS = @CFLAGS@
264: CPP = @CPP@
265: CPPFLAGS = @CPPFLAGS@
266: CYGPATH_W = @CYGPATH_W@
267: DEFS = @DEFS@
268: DEPDIR = @DEPDIR@
1.1.1.2 ! misho 269: DLLTOOL = @DLLTOOL@
1.1 misho 270: DSYMUTIL = @DSYMUTIL@
271: DUMPBIN = @DUMPBIN@
272: ECHO_C = @ECHO_C@
273: ECHO_N = @ECHO_N@
274: ECHO_T = @ECHO_T@
275: EGREP = @EGREP@
276: EXEEXT = @EXEEXT@
277: FGREP = @FGREP@
1.1.1.2 ! misho 278: GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
1.1 misho 279: GMSGFMT = @GMSGFMT@
280: GMSGFMT_015 = @GMSGFMT_015@
281: GREP = @GREP@
282: INSTALL = @INSTALL@
283: INSTALL_DATA = @INSTALL_DATA@
284: INSTALL_PROGRAM = @INSTALL_PROGRAM@
285: INSTALL_SCRIPT = @INSTALL_SCRIPT@
286: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
287: INTLLIBS = @INTLLIBS@
288: INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
289: LD = @LD@
290: LDFLAGS = @LDFLAGS@
291: LEX = @LEX@
292: LEXLIB = @LEXLIB@
293: LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
294: LIBICONV = @LIBICONV@
295: LIBINTL = @LIBINTL@
296: LIBOBJS = @LIBOBJS@
297: LIBS = @LIBS@
298: LIBTOOL = @LIBTOOL@
299: LIPO = @LIPO@
300: LN_S = @LN_S@
301: LTLIBICONV = @LTLIBICONV@
302: LTLIBINTL = @LTLIBINTL@
303: LTLIBOBJS = @LTLIBOBJS@
1.1.1.2 ! misho 304: LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
1.1 misho 305: MAKEINFO = @MAKEINFO@
1.1.1.2 ! misho 306: MANIFEST_TOOL = @MANIFEST_TOOL@
1.1 misho 307: MKDIR_P = @MKDIR_P@
308: MSGFMT = @MSGFMT@
309: MSGFMT_015 = @MSGFMT_015@
310: MSGMERGE = @MSGMERGE@
311: NM = @NM@
312: NMEDIT = @NMEDIT@
313: OBJDUMP = @OBJDUMP@
314: OBJEXT = @OBJEXT@
315: OTOOL = @OTOOL@
316: OTOOL64 = @OTOOL64@
317: PACKAGE = @PACKAGE@
318: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
319: PACKAGE_NAME = @PACKAGE_NAME@
320: PACKAGE_STRING = @PACKAGE_STRING@
321: PACKAGE_TARNAME = @PACKAGE_TARNAME@
322: PACKAGE_URL = @PACKAGE_URL@
323: PACKAGE_VERSION = @PACKAGE_VERSION@
324: PATH_SEPARATOR = @PATH_SEPARATOR@
325: POSUB = @POSUB@
326: RANLIB = @RANLIB@
327: SED = @SED@
328: SET_MAKE = @SET_MAKE@
329: SHELL = @SHELL@
330: STRIP = @STRIP@
331: USE_NLS = @USE_NLS@
332: VERSION = @VERSION@
333: XGETTEXT = @XGETTEXT@
334: XGETTEXT_015 = @XGETTEXT_015@
1.1.1.2 ! misho 335: XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
1.1 misho 336: abs_builddir = @abs_builddir@
337: abs_srcdir = @abs_srcdir@
338: abs_top_builddir = @abs_top_builddir@
339: abs_top_srcdir = @abs_top_srcdir@
1.1.1.2 ! misho 340: ac_ct_AR = @ac_ct_AR@
1.1 misho 341: ac_ct_CC = @ac_ct_CC@
342: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
343: am__include = @am__include@
344: am__leading_dot = @am__leading_dot@
345: am__quote = @am__quote@
346: am__tar = @am__tar@
347: am__untar = @am__untar@
348: bindir = @bindir@
349: build = @build@
350: build_alias = @build_alias@
351: build_cpu = @build_cpu@
352: build_os = @build_os@
353: build_vendor = @build_vendor@
354: builddir = @builddir@
355: datadir = @datadir@
356: datarootdir = @datarootdir@
357: docdir = @docdir@
358: dvidir = @dvidir@
359: exec_prefix = @exec_prefix@
360: host = @host@
361: host_alias = @host_alias@
362: host_cpu = @host_cpu@
363: host_os = @host_os@
364: host_vendor = @host_vendor@
365: htmldir = @htmldir@
366: includedir = @includedir@
367: infodir = @infodir@
368: install_sh = @install_sh@
369: libdir = @libdir@
370: libexecdir = @libexecdir@
371: localedir = @localedir@
372: localstatedir = @localstatedir@
373: mandir = @mandir@
374: mkdir_p = @mkdir_p@
375: oldincludedir = @oldincludedir@
376: pdfdir = @pdfdir@
377: prefix = @prefix@
378: program_transform_name = @program_transform_name@
379: psdir = @psdir@
1.1.1.2 ! misho 380: runstatedir = @runstatedir@
1.1 misho 381: sbindir = @sbindir@
382: sharedstatedir = @sharedstatedir@
383: srcdir = @srcdir@
384: sysconfdir = @sysconfdir@
385: target_alias = @target_alias@
386: top_build_prefix = @top_build_prefix@
387: top_builddir = @top_builddir@
388: top_srcdir = @top_srcdir@
1.1.1.2 ! misho 389: ACLOCAL_AMFLAGS = -I m4
1.1 misho 390: CLEANFILES = *~ '\#*\#'
391: pkgconfigdir = $(libdir)/pkgconfig
392: pkgconfig_DATA = libconfuse.pc
1.1.1.2 ! misho 393: doc_DATA = README.md AUTHORS LICENSE ChangeLog.md
! 394: EXTRA_DIST = README.md LICENSE ChangeLog.md libconfuse.spec.in libconfuse.spec
! 395: EXAMPLES = $(am__append_1)
! 396: SUBDIRS = m4 po src $(EXAMPLES) tests doc
1.1 misho 397: BORLAND_FILES = cfgtest.bpf cfgtest.bpr config.h confuse.bpg libConfuse.bpf libConfuse.bpr
398: DEVCPP_FILES = cfgtest.dev config.h libConfuse.dev
399: MSVC6_FILES = config.h libConfuse.dsp libConfuse.dsw unistd.h
400: MSVS_FILES = config.h msvs.net.sln unistd.h
401: MSVS_CFGTEST_FILES = cfgtest.vcproj
402: MSVS_LIBCONFUSE_FILES = libConfuse.vcproj
1.1.1.2 ! misho 403: MINGW_FILES = build.bat config.h Makefile
! 404: MD5 = md5sum
1.1 misho 405: all: config.h
406: $(MAKE) $(AM_MAKEFLAGS) all-recursive
407:
408: .SUFFIXES:
1.1.1.2 ! misho 409: am--refresh: Makefile
1.1 misho 410: @:
1.1.1.2 ! misho 411: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
1.1 misho 412: @for dep in $?; do \
413: case '$(am__configure_deps)' in \
414: *$$dep*) \
415: echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
416: $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
417: && exit 0; \
418: exit 1;; \
419: esac; \
420: done; \
421: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
422: $(am__cd) $(top_srcdir) && \
423: $(AUTOMAKE) --foreign Makefile
424: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
425: @case '$?' in \
426: *config.status*) \
427: echo ' $(SHELL) ./config.status'; \
428: $(SHELL) ./config.status;; \
429: *) \
1.1.1.2 ! misho 430: echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
! 431: cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
1.1 misho 432: esac;
433:
434: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
435: $(SHELL) ./config.status --recheck
436:
1.1.1.2 ! misho 437: $(top_srcdir)/configure: $(am__configure_deps)
1.1 misho 438: $(am__cd) $(srcdir) && $(AUTOCONF)
1.1.1.2 ! misho 439: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
1.1 misho 440: $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
441: $(am__aclocal_m4_deps):
442:
443: config.h: stamp-h1
1.1.1.2 ! misho 444: @test -f $@ || rm -f stamp-h1
! 445: @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
1.1 misho 446:
447: stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
448: @rm -f stamp-h1
449: cd $(top_builddir) && $(SHELL) ./config.status config.h
1.1.1.2 ! misho 450: $(srcdir)/config.h.in: $(am__configure_deps)
1.1 misho 451: ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
452: rm -f stamp-h1
453: touch $@
454:
455: distclean-hdr:
456: -rm -f config.h stamp-h1
457: libconfuse.pc: $(top_builddir)/config.status $(srcdir)/libconfuse.pc.in
458: cd $(top_builddir) && $(SHELL) ./config.status $@
459: libconfuse.spec: $(top_builddir)/config.status $(srcdir)/libconfuse.spec.in
460: cd $(top_builddir) && $(SHELL) ./config.status $@
461:
462: mostlyclean-libtool:
463: -rm -f *.lo
464:
465: clean-libtool:
466: -rm -rf .libs _libs
467:
468: distclean-libtool:
469: -rm -f libtool config.lt
1.1.1.2 ! misho 470: install-docDATA: $(doc_DATA)
! 471: @$(NORMAL_INSTALL)
! 472: @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
! 473: if test -n "$$list"; then \
! 474: echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
! 475: $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
! 476: fi; \
! 477: for p in $$list; do \
! 478: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 479: echo "$$d$$p"; \
! 480: done | $(am__base_list) | \
! 481: while read files; do \
! 482: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
! 483: $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
! 484: done
! 485:
! 486: uninstall-docDATA:
! 487: @$(NORMAL_UNINSTALL)
! 488: @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
! 489: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
! 490: dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
1.1 misho 491: install-pkgconfigDATA: $(pkgconfig_DATA)
492: @$(NORMAL_INSTALL)
493: @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
1.1.1.2 ! misho 494: if test -n "$$list"; then \
! 495: echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
! 496: $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
! 497: fi; \
1.1 misho 498: for p in $$list; do \
499: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
500: echo "$$d$$p"; \
501: done | $(am__base_list) | \
502: while read files; do \
503: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
504: $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
505: done
506:
507: uninstall-pkgconfigDATA:
508: @$(NORMAL_UNINSTALL)
509: @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
510: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
1.1.1.2 ! misho 511: dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
1.1 misho 512:
513: # This directory's subdirectories are mostly independent; you can cd
1.1.1.2 ! misho 514: # into them and run 'make' without going through this Makefile.
! 515: # To change the values of 'make' variables: instead of editing Makefiles,
! 516: # (1) if the variable is set in 'config.status', edit 'config.status'
! 517: # (which will cause the Makefiles to be regenerated when you run 'make');
! 518: # (2) otherwise, pass the desired values on the 'make' command line.
! 519: $(am__recursive_targets):
! 520: @fail=; \
! 521: if $(am__make_keepgoing); then \
! 522: failcom='fail=yes'; \
! 523: else \
! 524: failcom='exit 1'; \
! 525: fi; \
1.1 misho 526: dot_seen=no; \
527: target=`echo $@ | sed s/-recursive//`; \
1.1.1.2 ! misho 528: case "$@" in \
! 529: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! 530: *) list='$(SUBDIRS)' ;; \
! 531: esac; \
! 532: for subdir in $$list; do \
1.1 misho 533: echo "Making $$target in $$subdir"; \
534: if test "$$subdir" = "."; then \
535: dot_seen=yes; \
536: local_target="$$target-am"; \
537: else \
538: local_target="$$target"; \
539: fi; \
540: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
541: || eval $$failcom; \
542: done; \
543: if test "$$dot_seen" = "no"; then \
544: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
545: fi; test -z "$$fail"
546:
1.1.1.2 ! misho 547: ID: $(am__tagged_files)
! 548: $(am__define_uniq_tagged_files); mkid -fID $$unique
! 549: tags: tags-recursive
! 550: TAGS: tags
1.1 misho 551:
1.1.1.2 ! misho 552: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
1.1 misho 553: set x; \
554: here=`pwd`; \
555: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
556: include_option=--etags-include; \
557: empty_fix=.; \
558: else \
559: include_option=--include; \
560: empty_fix=; \
561: fi; \
562: list='$(SUBDIRS)'; for subdir in $$list; do \
563: if test "$$subdir" = .; then :; else \
564: test ! -f $$subdir/TAGS || \
565: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
566: fi; \
567: done; \
1.1.1.2 ! misho 568: $(am__define_uniq_tagged_files); \
1.1 misho 569: shift; \
570: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
571: test -n "$$unique" || unique=$$empty_fix; \
572: if test $$# -gt 0; then \
573: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
574: "$$@" $$unique; \
575: else \
576: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
577: $$unique; \
578: fi; \
579: fi
1.1.1.2 ! misho 580: ctags: ctags-recursive
! 581:
! 582: CTAGS: ctags
! 583: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
! 584: $(am__define_uniq_tagged_files); \
1.1 misho 585: test -z "$(CTAGS_ARGS)$$unique" \
586: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
587: $$unique
588:
589: GTAGS:
590: here=`$(am__cd) $(top_builddir) && pwd` \
591: && $(am__cd) $(top_srcdir) \
592: && gtags -i $(GTAGS_ARGS) "$$here"
1.1.1.2 ! misho 593: cscope: cscope.files
! 594: test ! -s cscope.files \
! 595: || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
! 596: clean-cscope:
! 597: -rm -f cscope.files
! 598: cscope.files: clean-cscope cscopelist
! 599: cscopelist: cscopelist-recursive
! 600:
! 601: cscopelist-am: $(am__tagged_files)
! 602: list='$(am__tagged_files)'; \
! 603: case "$(srcdir)" in \
! 604: [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
! 605: *) sdir=$(subdir)/$(srcdir) ;; \
! 606: esac; \
! 607: for i in $$list; do \
! 608: if test -f "$$i"; then \
! 609: echo "$(subdir)/$$i"; \
! 610: else \
! 611: echo "$$sdir/$$i"; \
! 612: fi; \
! 613: done >> $(top_builddir)/cscope.files
1.1 misho 614:
615: distclean-tags:
616: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1.1.1.2 ! misho 617: -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
1.1 misho 618:
1.1.1.2 ! misho 619: distdir: $(BUILT_SOURCES)
! 620: $(MAKE) $(AM_MAKEFLAGS) distdir-am
! 621:
! 622: distdir-am: $(DISTFILES)
1.1 misho 623: $(am__remove_distdir)
624: test -d "$(distdir)" || mkdir "$(distdir)"
625: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
626: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
627: list='$(DISTFILES)'; \
628: dist_files=`for file in $$list; do echo $$file; done | \
629: sed -e "s|^$$srcdirstrip/||;t" \
630: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
631: case $$dist_files in \
632: */*) $(MKDIR_P) `echo "$$dist_files" | \
633: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
634: sort -u` ;; \
635: esac; \
636: for file in $$dist_files; do \
637: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
638: if test -d $$d/$$file; then \
639: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
640: if test -d "$(distdir)/$$file"; then \
641: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
642: fi; \
643: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
644: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
645: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
646: fi; \
647: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
648: else \
649: test -f "$(distdir)/$$file" \
650: || cp -p $$d/$$file "$(distdir)/$$file" \
651: || exit 1; \
652: fi; \
653: done
654: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
655: if test "$$subdir" = .; then :; else \
1.1.1.2 ! misho 656: $(am__make_dryrun) \
! 657: || test -d "$(distdir)/$$subdir" \
! 658: || $(MKDIR_P) "$(distdir)/$$subdir" \
! 659: || exit 1; \
1.1 misho 660: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
661: $(am__relativize); \
662: new_distdir=$$reldir; \
663: dir1=$$subdir; dir2="$(top_distdir)"; \
664: $(am__relativize); \
665: new_top_distdir=$$reldir; \
666: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
667: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
668: ($(am__cd) $$subdir && \
669: $(MAKE) $(AM_MAKEFLAGS) \
670: top_distdir="$$new_top_distdir" \
671: distdir="$$new_distdir" \
672: am__remove_distdir=: \
673: am__skip_length_check=: \
674: am__skip_mode_fix=: \
675: distdir) \
676: || exit 1; \
677: fi; \
678: done
679: -test -n "$(am__skip_mode_fix)" \
680: || find "$(distdir)" -type d ! -perm -755 \
681: -exec chmod u+rwx,go+rx {} \; -o \
682: ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
683: ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
684: ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
685: || chmod -R a+r "$(distdir)"
686: dist-gzip: distdir
1.1.1.2 ! misho 687: tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
! 688: $(am__post_remove_distdir)
1.1 misho 689:
690: dist-bzip2: distdir
1.1.1.2 ! misho 691: tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
! 692: $(am__post_remove_distdir)
1.1 misho 693:
1.1.1.2 ! misho 694: dist-lzip: distdir
! 695: tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
! 696: $(am__post_remove_distdir)
1.1 misho 697: dist-xz: distdir
1.1.1.2 ! misho 698: tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
! 699: $(am__post_remove_distdir)
1.1 misho 700:
701: dist-tarZ: distdir
1.1.1.2 ! misho 702: @echo WARNING: "Support for distribution archives compressed with" \
! 703: "legacy program 'compress' is deprecated." >&2
! 704: @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1.1 misho 705: tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1.1.1.2 ! misho 706: $(am__post_remove_distdir)
1.1 misho 707:
708: dist-shar: distdir
1.1.1.2 ! misho 709: @echo WARNING: "Support for shar distribution archives is" \
! 710: "deprecated." >&2
! 711: @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
! 712: shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
! 713: $(am__post_remove_distdir)
! 714:
! 715: dist dist-all:
! 716: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
! 717: $(am__post_remove_distdir)
1.1 misho 718:
719: # This target untars the dist file and tries a VPATH configuration. Then
720: # it guarantees that the distribution is self-contained by making another
721: # tarfile.
722: distcheck: dist
723: case '$(DIST_ARCHIVES)' in \
724: *.tar.gz*) \
1.1.1.2 ! misho 725: eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
1.1 misho 726: *.tar.bz2*) \
727: bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
1.1.1.2 ! misho 728: *.tar.lz*) \
! 729: lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
1.1 misho 730: *.tar.xz*) \
731: xz -dc $(distdir).tar.xz | $(am__untar) ;;\
732: *.tar.Z*) \
733: uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
734: *.shar.gz*) \
1.1.1.2 ! misho 735: eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
1.1 misho 736: *.zip*) \
737: unzip $(distdir).zip ;;\
738: esac
1.1.1.2 ! misho 739: chmod -R a-w $(distdir)
! 740: chmod u+w $(distdir)
! 741: mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
1.1 misho 742: chmod a-w $(distdir)
743: test -d $(distdir)/_build || exit 0; \
744: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
745: && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
746: && am__cwd=`pwd` \
1.1.1.2 ! misho 747: && $(am__cd) $(distdir)/_build/sub \
! 748: && ../../configure \
! 749: $(AM_DISTCHECK_CONFIGURE_FLAGS) \
1.1 misho 750: $(DISTCHECK_CONFIGURE_FLAGS) \
1.1.1.2 ! misho 751: --srcdir=../.. --prefix="$$dc_install_base" \
1.1 misho 752: && $(MAKE) $(AM_MAKEFLAGS) \
753: && $(MAKE) $(AM_MAKEFLAGS) dvi \
754: && $(MAKE) $(AM_MAKEFLAGS) check \
755: && $(MAKE) $(AM_MAKEFLAGS) install \
756: && $(MAKE) $(AM_MAKEFLAGS) installcheck \
757: && $(MAKE) $(AM_MAKEFLAGS) uninstall \
758: && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
759: distuninstallcheck \
760: && chmod -R a-w "$$dc_install_base" \
761: && ({ \
762: (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
763: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
764: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
765: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
766: distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
767: } || { rm -rf "$$dc_destdir"; exit 1; }) \
768: && rm -rf "$$dc_destdir" \
769: && $(MAKE) $(AM_MAKEFLAGS) dist \
770: && rm -rf $(DIST_ARCHIVES) \
771: && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
772: && cd "$$am__cwd" \
773: || exit 1
1.1.1.2 ! misho 774: $(am__post_remove_distdir)
1.1 misho 775: @(echo "$(distdir) archives ready for distribution: "; \
776: list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
777: sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
778: distuninstallcheck:
1.1.1.2 ! misho 779: @test -n '$(distuninstallcheck_dir)' || { \
! 780: echo 'ERROR: trying to run $@ with an empty' \
! 781: '$$(distuninstallcheck_dir)' >&2; \
! 782: exit 1; \
! 783: }; \
! 784: $(am__cd) '$(distuninstallcheck_dir)' || { \
! 785: echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
! 786: exit 1; \
! 787: }; \
! 788: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
1.1 misho 789: || { echo "ERROR: files left after uninstall:" ; \
790: if test -n "$(DESTDIR)"; then \
791: echo " (check DESTDIR support)"; \
792: fi ; \
793: $(distuninstallcheck_listfiles) ; \
794: exit 1; } >&2
795: distcleancheck: distclean
796: @if test '$(srcdir)' = . ; then \
797: echo "ERROR: distcleancheck can only run from a VPATH build" ; \
798: exit 1 ; \
799: fi
800: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
801: || { echo "ERROR: files left in build directory after distclean:" ; \
802: $(distcleancheck_listfiles) ; \
803: exit 1; } >&2
804: check-am: all-am
805: check: check-recursive
806: all-am: Makefile $(DATA) config.h
807: installdirs: installdirs-recursive
808: installdirs-am:
1.1.1.2 ! misho 809: for dir in "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgconfigdir)"; do \
1.1 misho 810: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
811: done
812: install: install-recursive
813: install-exec: install-exec-recursive
814: install-data: install-data-recursive
815: uninstall: uninstall-recursive
816:
817: install-am: all-am
818: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
819:
820: installcheck: installcheck-recursive
821: install-strip:
1.1.1.2 ! misho 822: if test -z '$(STRIP)'; then \
! 823: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 824: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 825: install; \
! 826: else \
! 827: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 828: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 829: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
! 830: fi
1.1 misho 831: mostlyclean-generic:
832:
833: clean-generic:
834: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
835:
836: distclean-generic:
837: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
838: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
839:
840: maintainer-clean-generic:
841: @echo "This command is intended for maintainers to use"
842: @echo "it deletes files that may require special tools to rebuild."
843: clean: clean-recursive
844:
845: clean-am: clean-generic clean-libtool mostlyclean-am
846:
847: distclean: distclean-recursive
848: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
849: -rm -f Makefile
850: distclean-am: clean-am distclean-generic distclean-hdr \
851: distclean-libtool distclean-tags
852:
853: dvi: dvi-recursive
854:
855: dvi-am:
856:
857: html: html-recursive
858:
859: html-am:
860:
861: info: info-recursive
862:
863: info-am:
864:
1.1.1.2 ! misho 865: install-data-am: install-docDATA install-pkgconfigDATA
1.1 misho 866:
867: install-dvi: install-dvi-recursive
868:
869: install-dvi-am:
870:
871: install-exec-am:
872:
873: install-html: install-html-recursive
874:
875: install-html-am:
876:
877: install-info: install-info-recursive
878:
879: install-info-am:
880:
881: install-man:
882:
883: install-pdf: install-pdf-recursive
884:
885: install-pdf-am:
886:
887: install-ps: install-ps-recursive
888:
889: install-ps-am:
890:
891: installcheck-am:
892:
893: maintainer-clean: maintainer-clean-recursive
894: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
895: -rm -rf $(top_srcdir)/autom4te.cache
896: -rm -f Makefile
897: maintainer-clean-am: distclean-am maintainer-clean-generic
898:
899: mostlyclean: mostlyclean-recursive
900:
901: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
902:
903: pdf: pdf-recursive
904:
905: pdf-am:
906:
907: ps: ps-recursive
908:
909: ps-am:
910:
1.1.1.2 ! misho 911: uninstall-am: uninstall-docDATA uninstall-pkgconfigDATA
1.1 misho 912:
1.1.1.2 ! misho 913: .MAKE: $(am__recursive_targets) all install-am install-strip
1.1 misho 914:
1.1.1.2 ! misho 915: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
! 916: am--refresh check check-am clean clean-cscope clean-generic \
! 917: clean-libtool cscope cscopelist-am ctags ctags-am dist \
! 918: dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
! 919: dist-xz dist-zip distcheck distclean distclean-generic \
! 920: distclean-hdr distclean-libtool distclean-tags distcleancheck \
! 921: distdir distuninstallcheck dvi dvi-am html html-am info \
! 922: info-am install install-am install-data install-data-am \
! 923: install-docDATA install-dvi install-dvi-am install-exec \
! 924: install-exec-am install-html install-html-am install-info \
! 925: install-info-am install-man install-pdf install-pdf-am \
! 926: install-pkgconfigDATA install-ps install-ps-am install-strip \
! 927: installcheck installcheck-am installdirs installdirs-am \
! 928: maintainer-clean maintainer-clean-generic mostlyclean \
! 929: mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
! 930: tags tags-am uninstall uninstall-am uninstall-docDATA \
! 931: uninstall-pkgconfigDATA
1.1 misho 932:
1.1.1.2 ! misho 933: .PRECIOUS: Makefile
1.1 misho 934:
935:
936: add-windows-files:
1.1.1.2 ! misho 937: @mkdir $(distdir)/windows
! 938: @mkdir $(distdir)/windows/borland
! 939: @mkdir $(distdir)/windows/devcpp
! 940: @mkdir $(distdir)/windows/msvc6
! 941: @mkdir $(distdir)/windows/msvc6/libConfuse
! 942: @mkdir $(distdir)/windows/msvs.net
! 943: @mkdir $(distdir)/windows/msvs.net/cfgtest
! 944: @mkdir $(distdir)/windows/msvs.net/libConfuse
! 945: @mkdir $(distdir)/windows/mingw
! 946: @for f in $(BORLAND_FILES); do \
1.1 misho 947: cp -f $(top_srcdir)/windows/borland/$$f $(distdir)/windows/borland/; done
1.1.1.2 ! misho 948: @for f in $(DEVCPP_FILES); do \
1.1 misho 949: cp -f $(top_srcdir)/windows/devcpp/$$f $(distdir)/windows/devcpp/; done
1.1.1.2 ! misho 950: @for f in $(MSVS_FILES); do \
1.1 misho 951: cp -f $(top_srcdir)/windows/msvs.net/$$f $(distdir)/windows/msvs.net/; done
1.1.1.2 ! misho 952: @for f in $(MSVS_CFGTEST_FILES); do \
1.1 misho 953: cp -f $(top_srcdir)/windows/msvs.net/cfgtest/$$f $(distdir)/windows/msvs.net/cfgtest/; done
1.1.1.2 ! misho 954: @for f in $(MSVS_LIBCONFUSE_FILES); do \
1.1 misho 955: cp -f $(top_srcdir)/windows/msvs.net/libConfuse/$$f $(distdir)/windows/msvs.net/libConfuse; done
1.1.1.2 ! misho 956: @for f in $(MSVC6_FILES); do \
1.1 misho 957: cp -f $(top_srcdir)/windows/msvc6/libConfuse/$$f $(distdir)/windows/msvc6/libConfuse; done
1.1.1.2 ! misho 958: @for f in $(MINGW_FILES); do \
! 959: cp -f $(top_srcdir)/windows/mingw/$$f $(distdir)/windows/mingw; done
! 960: @cp $(top_srcdir)/examples/wincfgtest.c $(distdir)/examples
! 961: @cp $(top_srcdir)/examples/wincfgtest.conf $(distdir)/examples
! 962: @cp $(top_srcdir)/examples/wincfgtest.dev $(distdir)/examples
1.1 misho 963:
964: unpack:
1.1.1.2 ! misho 965: @tar xfz $(distdir).tar.gz
1.1 misho 966:
967: zip: dist unpack add-windows-files
1.1.1.2 ! misho 968: @rm -f $(distdir).zip
! 969: @zip -qr $(distdir).zip $(distdir)
! 970: @rm -rf $(distdir)
1.1 misho 971:
972: rpm: Makefile
1.1.1.2 ! misho 973: @$(MAKE) dist
! 974: @rpmbuild -ta --clean $(distdir).tar.gz
! 975:
! 976: dist-zip: zip
! 977: md5-dist:
! 978: @for file in $(DIST_ARCHIVES) $(distdir).zip; do \
! 979: $(MD5) $$file > $$file.md5; \
! 980: done
! 981:
! 982: release-hook:
! 983: @if [ ! `git tag | grep v$(PACKAGE_VERSION)` ]; then \
! 984: echo; \
! 985: printf "\e[1m\e[41mCannot find release tag v$(PACKAGE_VERSION)\e[0m\n"; \
! 986: printf "\e[1m\e[5mDo release anyway?\e[0m "; read yorn; \
! 987: if [ "$$yorn" != "y" -a "$$yorn" != "Y" ]; then \
! 988: printf "OK, aborting release.\n"; \
! 989: exit 1; \
! 990: fi; \
! 991: echo; \
! 992: else \
! 993: echo; \
! 994: printf "\e[1m\e[42mFound GIT release tag v$(PACKAGE_VERSION)\e[0m\n"; \
! 995: printf "\e[1m\e[44m>>Remember to push tags!\e[0m\n"; \
! 996: echo; \
! 997: fi
! 998:
! 999: release: release-hook distcheck dist-zip md5-dist
! 1000: @echo
! 1001: @echo "Resulting release files:"
! 1002: @echo "================================================================="
! 1003: @for file in $(DIST_ARCHIVES) $(distdir).zip; do \
! 1004: printf "%-32s Distribution tarball\n" $$file; \
! 1005: printf "%-32s " $$file.md5; cat $$file.md5 | cut -f1 -d' '; \
! 1006: done
1.1 misho 1007:
1008: # Tell versions [3.59,3.63) of GNU make to not export all variables.
1009: # Otherwise a system limit (for SysV at least) may be exceeded.
1010: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / confuse