Annotation of embedaddon/confuse/doc/Doxyfile, revision 1.1

1.1     ! misho       1: # Doxyfile 1.5.8
        !             2: 
        !             3: # This file describes the settings to be used by the documentation system
        !             4: # doxygen (www.doxygen.org) for a project
        !             5: #
        !             6: # All text after a hash (#) is considered a comment and will be ignored
        !             7: # The format is:
        !             8: #       TAG = value [value, ...]
        !             9: # For lists items can also be appended using:
        !            10: #       TAG += value [value, ...]
        !            11: # Values that contain spaces should be placed between quotes (" ")
        !            12: 
        !            13: #---------------------------------------------------------------------------
        !            14: # Project related configuration options
        !            15: #---------------------------------------------------------------------------
        !            16: 
        !            17: # This tag specifies the encoding used for all characters in the config file 
        !            18: # that follow. The default is UTF-8 which is also the encoding used for all 
        !            19: # text before the first occurrence of this tag. Doxygen uses libiconv (or the 
        !            20: # iconv built into libc) for the transcoding. See 
        !            21: # http://www.gnu.org/software/libiconv for the list of possible encodings.
        !            22: 
        !            23: DOXYFILE_ENCODING      = UTF-8
        !            24: 
        !            25: # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
        !            26: # by quotes) that should identify the project.
        !            27: 
        !            28: PROJECT_NAME           = confuse
        !            29: 
        !            30: # The PROJECT_NUMBER tag can be used to enter a project or revision number. 
        !            31: # This could be handy for archiving the generated documentation or 
        !            32: # if some version control system is used.
        !            33: 
        !            34: PROJECT_NUMBER         = 2.7
        !            35: 
        !            36: # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
        !            37: # base path where the generated documentation will be put. 
        !            38: # If a relative path is entered, it will be relative to the location 
        !            39: # where doxygen was started. If left blank the current directory will be used.
        !            40: 
        !            41: OUTPUT_DIRECTORY       = 
        !            42: 
        !            43: # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
        !            44: # 4096 sub-directories (in 2 levels) under the output directory of each output 
        !            45: # format and will distribute the generated files over these directories. 
        !            46: # Enabling this option can be useful when feeding doxygen a huge amount of 
        !            47: # source files, where putting all generated files in the same directory would 
        !            48: # otherwise cause performance problems for the file system.
        !            49: 
        !            50: CREATE_SUBDIRS         = NO
        !            51: 
        !            52: # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
        !            53: # documentation generated by doxygen is written. Doxygen will use this 
        !            54: # information to generate all constant output in the proper language. 
        !            55: # The default language is English, other supported languages are: 
        !            56: # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 
        !            57: # Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, 
        !            58: # Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), 
        !            59: # Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, 
        !            60: # Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, 
        !            61: # Spanish, Swedish, and Ukrainian.
        !            62: 
        !            63: OUTPUT_LANGUAGE        = English
        !            64: 
        !            65: # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
        !            66: # include brief member descriptions after the members that are listed in 
        !            67: # the file and class documentation (similar to JavaDoc). 
        !            68: # Set to NO to disable this.
        !            69: 
        !            70: BRIEF_MEMBER_DESC      = YES
        !            71: 
        !            72: # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
        !            73: # the brief description of a member or function before the detailed description. 
        !            74: # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
        !            75: # brief descriptions will be completely suppressed.
        !            76: 
        !            77: REPEAT_BRIEF           = YES
        !            78: 
        !            79: # This tag implements a quasi-intelligent brief description abbreviator 
        !            80: # that is used to form the text in various listings. Each string 
        !            81: # in this list, if found as the leading text of the brief description, will be 
        !            82: # stripped from the text and the result after processing the whole list, is 
        !            83: # used as the annotated text. Otherwise, the brief description is used as-is. 
        !            84: # If left blank, the following values are used ("$name" is automatically 
        !            85: # replaced with the name of the entity): "The $name class" "The $name widget" 
        !            86: # "The $name file" "is" "provides" "specifies" "contains" 
        !            87: # "represents" "a" "an" "the"
        !            88: 
        !            89: ABBREVIATE_BRIEF       = 
        !            90: 
        !            91: # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
        !            92: # Doxygen will generate a detailed section even if there is only a brief 
        !            93: # description.
        !            94: 
        !            95: ALWAYS_DETAILED_SEC    = NO
        !            96: 
        !            97: # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
        !            98: # inherited members of a class in the documentation of that class as if those 
        !            99: # members were ordinary class members. Constructors, destructors and assignment 
        !           100: # operators of the base classes will not be shown.
        !           101: 
        !           102: INLINE_INHERITED_MEMB  = YES
        !           103: 
        !           104: # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
        !           105: # path before files name in the file list and in the header files. If set 
        !           106: # to NO the shortest path that makes the file name unique will be used.
        !           107: 
        !           108: FULL_PATH_NAMES        = NO
        !           109: 
        !           110: # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
        !           111: # can be used to strip a user-defined part of the path. Stripping is 
        !           112: # only done if one of the specified strings matches the left-hand part of 
        !           113: # the path. The tag can be used to show relative paths in the file list. 
        !           114: # If left blank the directory from which doxygen is run is used as the 
        !           115: # path to strip.
        !           116: 
        !           117: STRIP_FROM_PATH        = 
        !           118: 
        !           119: # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
        !           120: # the path mentioned in the documentation of a class, which tells 
        !           121: # the reader which header file to include in order to use a class. 
        !           122: # If left blank only the name of the header file containing the class 
        !           123: # definition is used. Otherwise one should specify the include paths that 
        !           124: # are normally passed to the compiler using the -I flag.
        !           125: 
        !           126: STRIP_FROM_INC_PATH    = 
        !           127: 
        !           128: # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
        !           129: # (but less readable) file names. This can be useful is your file systems 
        !           130: # doesn't support long names like on DOS, Mac, or CD-ROM.
        !           131: 
        !           132: SHORT_NAMES            = NO
        !           133: 
        !           134: # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
        !           135: # will interpret the first line (until the first dot) of a JavaDoc-style 
        !           136: # comment as the brief description. If set to NO, the JavaDoc 
        !           137: # comments will behave just like regular Qt-style comments 
        !           138: # (thus requiring an explicit @brief command for a brief description.)
        !           139: 
        !           140: JAVADOC_AUTOBRIEF      = YES
        !           141: 
        !           142: # If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
        !           143: # interpret the first line (until the first dot) of a Qt-style 
        !           144: # comment as the brief description. If set to NO, the comments 
        !           145: # will behave just like regular Qt-style comments (thus requiring 
        !           146: # an explicit \brief command for a brief description.)
        !           147: 
        !           148: QT_AUTOBRIEF           = NO
        !           149: 
        !           150: # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
        !           151: # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
        !           152: # comments) as a brief description. This used to be the default behaviour. 
        !           153: # The new default is to treat a multi-line C++ comment block as a detailed 
        !           154: # description. Set this tag to YES if you prefer the old behaviour instead.
        !           155: 
        !           156: MULTILINE_CPP_IS_BRIEF = NO
        !           157: 
        !           158: # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
        !           159: # member inherits the documentation from any documented member that it 
        !           160: # re-implements.
        !           161: 
        !           162: INHERIT_DOCS           = YES
        !           163: 
        !           164: # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
        !           165: # a new page for each member. If set to NO, the documentation of a member will 
        !           166: # be part of the file/class/namespace that contains it.
        !           167: 
        !           168: SEPARATE_MEMBER_PAGES  = NO
        !           169: 
        !           170: # The TAB_SIZE tag can be used to set the number of spaces in a tab. 
        !           171: # Doxygen uses this value to replace tabs by spaces in code fragments.
        !           172: 
        !           173: TAB_SIZE               = 4
        !           174: 
        !           175: # This tag can be used to specify a number of aliases that acts 
        !           176: # as commands in the documentation. An alias has the form "name=value". 
        !           177: # For example adding "sideeffect=\par Side Effects:\n" will allow you to 
        !           178: # put the command \sideeffect (or @sideeffect) in the documentation, which 
        !           179: # will result in a user-defined paragraph with heading "Side Effects:". 
        !           180: # You can put \n's in the value part of an alias to insert newlines.
        !           181: 
        !           182: ALIASES                = 
        !           183: 
        !           184: # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
        !           185: # sources only. Doxygen will then generate output that is more tailored for C. 
        !           186: # For instance, some of the names that are used will be different. The list 
        !           187: # of all members will be omitted, etc.
        !           188: 
        !           189: OPTIMIZE_OUTPUT_FOR_C  = YES
        !           190: 
        !           191: # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 
        !           192: # sources only. Doxygen will then generate output that is more tailored for 
        !           193: # Java. For instance, namespaces will be presented as packages, qualified 
        !           194: # scopes will look different, etc.
        !           195: 
        !           196: OPTIMIZE_OUTPUT_JAVA   = NO
        !           197: 
        !           198: # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 
        !           199: # sources only. Doxygen will then generate output that is more tailored for 
        !           200: # Fortran.
        !           201: 
        !           202: OPTIMIZE_FOR_FORTRAN   = NO
        !           203: 
        !           204: # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 
        !           205: # sources. Doxygen will then generate output that is tailored for 
        !           206: # VHDL.
        !           207: 
        !           208: OPTIMIZE_OUTPUT_VHDL   = NO
        !           209: 
        !           210: # Doxygen selects the parser to use depending on the extension of the files it parses. 
        !           211: # With this tag you can assign which parser to use for a given extension. 
        !           212: # Doxygen has a built-in mapping, but you can override or extend it using this tag. 
        !           213: # The format is ext=language, where ext is a file extension, and language is one of 
        !           214: # the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, 
        !           215: # Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat 
        !           216: # .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), 
        !           217: # use: inc=Fortran f=C
        !           218: 
        !           219: EXTENSION_MAPPING      = 
        !           220: 
        !           221: # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 
        !           222: # to include (a tag file for) the STL sources as input, then you should 
        !           223: # set this tag to YES in order to let doxygen match functions declarations and 
        !           224: # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 
        !           225: # func(std::string) {}). This also make the inheritance and collaboration 
        !           226: # diagrams that involve STL classes more complete and accurate.
        !           227: 
        !           228: BUILTIN_STL_SUPPORT    = NO
        !           229: 
        !           230: # If you use Microsoft's C++/CLI language, you should set this option to YES to 
        !           231: # enable parsing support.
        !           232: 
        !           233: CPP_CLI_SUPPORT        = NO
        !           234: 
        !           235: # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 
        !           236: # Doxygen will parse them like normal C++ but will assume all classes use public 
        !           237: # instead of private inheritance when no explicit protection keyword is present.
        !           238: 
        !           239: SIP_SUPPORT            = NO
        !           240: 
        !           241: # For Microsoft's IDL there are propget and propput attributes to indicate getter 
        !           242: # and setter methods for a property. Setting this option to YES (the default) 
        !           243: # will make doxygen to replace the get and set methods by a property in the 
        !           244: # documentation. This will only work if the methods are indeed getting or 
        !           245: # setting a simple type. If this is not the case, or you want to show the 
        !           246: # methods anyway, you should set this option to NO.
        !           247: 
        !           248: IDL_PROPERTY_SUPPORT   = YES
        !           249: 
        !           250: # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
        !           251: # tag is set to YES, then doxygen will reuse the documentation of the first 
        !           252: # member in the group (if any) for the other members of the group. By default 
        !           253: # all members of a group must be documented explicitly.
        !           254: 
        !           255: DISTRIBUTE_GROUP_DOC   = NO
        !           256: 
        !           257: # Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
        !           258: # the same type (for instance a group of public functions) to be put as a 
        !           259: # subgroup of that type (e.g. under the Public Functions section). Set it to 
        !           260: # NO to prevent subgrouping. Alternatively, this can be done per class using 
        !           261: # the \nosubgrouping command.
        !           262: 
        !           263: SUBGROUPING            = YES
        !           264: 
        !           265: # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 
        !           266: # is documented as struct, union, or enum with the name of the typedef. So 
        !           267: # typedef struct TypeS {} TypeT, will appear in the documentation as a struct 
        !           268: # with name TypeT. When disabled the typedef will appear as a member of a file, 
        !           269: # namespace, or class. And the struct will be named TypeS. This can typically 
        !           270: # be useful for C code in case the coding convention dictates that all compound 
        !           271: # types are typedef'ed and only the typedef is referenced, never the tag name.
        !           272: 
        !           273: TYPEDEF_HIDES_STRUCT   = NO
        !           274: 
        !           275: # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to 
        !           276: # determine which symbols to keep in memory and which to flush to disk. 
        !           277: # When the cache is full, less often used symbols will be written to disk. 
        !           278: # For small to medium size projects (<1000 input files) the default value is 
        !           279: # probably good enough. For larger projects a too small cache size can cause 
        !           280: # doxygen to be busy swapping symbols to and from disk most of the time 
        !           281: # causing a significant performance penality. 
        !           282: # If the system has enough physical memory increasing the cache will improve the 
        !           283: # performance by keeping more symbols in memory. Note that the value works on 
        !           284: # a logarithmic scale so increasing the size by one will rougly double the 
        !           285: # memory usage. The cache size is given by this formula: 
        !           286: # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, 
        !           287: # corresponding to a cache size of 2^16 = 65536 symbols
        !           288: 
        !           289: SYMBOL_CACHE_SIZE      = 0
        !           290: 
        !           291: #---------------------------------------------------------------------------
        !           292: # Build related configuration options
        !           293: #---------------------------------------------------------------------------
        !           294: 
        !           295: # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
        !           296: # documentation are documented, even if no documentation was available. 
        !           297: # Private class members and static file members will be hidden unless 
        !           298: # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
        !           299: 
        !           300: EXTRACT_ALL            = NO
        !           301: 
        !           302: # If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
        !           303: # will be included in the documentation.
        !           304: 
        !           305: EXTRACT_PRIVATE        = NO
        !           306: 
        !           307: # If the EXTRACT_STATIC tag is set to YES all static members of a file 
        !           308: # will be included in the documentation.
        !           309: 
        !           310: EXTRACT_STATIC         = NO
        !           311: 
        !           312: # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
        !           313: # defined locally in source files will be included in the documentation. 
        !           314: # If set to NO only classes defined in header files are included.
        !           315: 
        !           316: EXTRACT_LOCAL_CLASSES  = NO
        !           317: 
        !           318: # This flag is only useful for Objective-C code. When set to YES local 
        !           319: # methods, which are defined in the implementation section but not in 
        !           320: # the interface are included in the documentation. 
        !           321: # If set to NO (the default) only methods in the interface are included.
        !           322: 
        !           323: EXTRACT_LOCAL_METHODS  = NO
        !           324: 
        !           325: # If this flag is set to YES, the members of anonymous namespaces will be 
        !           326: # extracted and appear in the documentation as a namespace called 
        !           327: # 'anonymous_namespace{file}', where file will be replaced with the base 
        !           328: # name of the file that contains the anonymous namespace. By default 
        !           329: # anonymous namespace are hidden.
        !           330: 
        !           331: EXTRACT_ANON_NSPACES   = NO
        !           332: 
        !           333: # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
        !           334: # undocumented members of documented classes, files or namespaces. 
        !           335: # If set to NO (the default) these members will be included in the 
        !           336: # various overviews, but no documentation section is generated. 
        !           337: # This option has no effect if EXTRACT_ALL is enabled.
        !           338: 
        !           339: HIDE_UNDOC_MEMBERS     = YES
        !           340: 
        !           341: # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
        !           342: # undocumented classes that are normally visible in the class hierarchy. 
        !           343: # If set to NO (the default) these classes will be included in the various 
        !           344: # overviews. This option has no effect if EXTRACT_ALL is enabled.
        !           345: 
        !           346: HIDE_UNDOC_CLASSES     = YES
        !           347: 
        !           348: # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
        !           349: # friend (class|struct|union) declarations. 
        !           350: # If set to NO (the default) these declarations will be included in the 
        !           351: # documentation.
        !           352: 
        !           353: HIDE_FRIEND_COMPOUNDS  = NO
        !           354: 
        !           355: # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
        !           356: # documentation blocks found inside the body of a function. 
        !           357: # If set to NO (the default) these blocks will be appended to the 
        !           358: # function's detailed documentation block.
        !           359: 
        !           360: HIDE_IN_BODY_DOCS      = NO
        !           361: 
        !           362: # The INTERNAL_DOCS tag determines if documentation 
        !           363: # that is typed after a \internal command is included. If the tag is set 
        !           364: # to NO (the default) then the documentation will be excluded. 
        !           365: # Set it to YES to include the internal documentation.
        !           366: 
        !           367: INTERNAL_DOCS          = NO
        !           368: 
        !           369: # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
        !           370: # file names in lower-case letters. If set to YES upper-case letters are also 
        !           371: # allowed. This is useful if you have classes or files whose names only differ 
        !           372: # in case and if your file system supports case sensitive file names. Windows 
        !           373: # and Mac users are advised to set this option to NO.
        !           374: 
        !           375: CASE_SENSE_NAMES       = YES
        !           376: 
        !           377: # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
        !           378: # will show members with their full class and namespace scopes in the 
        !           379: # documentation. If set to YES the scope will be hidden.
        !           380: 
        !           381: HIDE_SCOPE_NAMES       = NO
        !           382: 
        !           383: # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
        !           384: # will put a list of the files that are included by a file in the documentation 
        !           385: # of that file.
        !           386: 
        !           387: SHOW_INCLUDE_FILES     = YES
        !           388: 
        !           389: # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
        !           390: # is inserted in the documentation for inline members.
        !           391: 
        !           392: INLINE_INFO            = YES
        !           393: 
        !           394: # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
        !           395: # will sort the (detailed) documentation of file and class members 
        !           396: # alphabetically by member name. If set to NO the members will appear in 
        !           397: # declaration order.
        !           398: 
        !           399: SORT_MEMBER_DOCS       = YES
        !           400: 
        !           401: # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
        !           402: # brief documentation of file, namespace and class members alphabetically 
        !           403: # by member name. If set to NO (the default) the members will appear in 
        !           404: # declaration order.
        !           405: 
        !           406: SORT_BRIEF_DOCS        = NO
        !           407: 
        !           408: # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 
        !           409: # hierarchy of group names into alphabetical order. If set to NO (the default) 
        !           410: # the group names will appear in their defined order.
        !           411: 
        !           412: SORT_GROUP_NAMES       = NO
        !           413: 
        !           414: # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
        !           415: # sorted by fully-qualified names, including namespaces. If set to 
        !           416: # NO (the default), the class list will be sorted only by class name, 
        !           417: # not including the namespace part. 
        !           418: # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. 
        !           419: # Note: This option applies only to the class list, not to the 
        !           420: # alphabetical list.
        !           421: 
        !           422: SORT_BY_SCOPE_NAME     = NO
        !           423: 
        !           424: # The GENERATE_TODOLIST tag can be used to enable (YES) or 
        !           425: # disable (NO) the todo list. This list is created by putting \todo 
        !           426: # commands in the documentation.
        !           427: 
        !           428: GENERATE_TODOLIST      = YES
        !           429: 
        !           430: # The GENERATE_TESTLIST tag can be used to enable (YES) or 
        !           431: # disable (NO) the test list. This list is created by putting \test 
        !           432: # commands in the documentation.
        !           433: 
        !           434: GENERATE_TESTLIST      = YES
        !           435: 
        !           436: # The GENERATE_BUGLIST tag can be used to enable (YES) or 
        !           437: # disable (NO) the bug list. This list is created by putting \bug 
        !           438: # commands in the documentation.
        !           439: 
        !           440: GENERATE_BUGLIST       = YES
        !           441: 
        !           442: # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
        !           443: # disable (NO) the deprecated list. This list is created by putting 
        !           444: # \deprecated commands in the documentation.
        !           445: 
        !           446: GENERATE_DEPRECATEDLIST= YES
        !           447: 
        !           448: # The ENABLED_SECTIONS tag can be used to enable conditional 
        !           449: # documentation sections, marked by \if sectionname ... \endif.
        !           450: 
        !           451: ENABLED_SECTIONS       = 
        !           452: 
        !           453: # The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
        !           454: # the initial value of a variable or define consists of for it to appear in 
        !           455: # the documentation. If the initializer consists of more lines than specified 
        !           456: # here it will be hidden. Use a value of 0 to hide initializers completely. 
        !           457: # The appearance of the initializer of individual variables and defines in the 
        !           458: # documentation can be controlled using \showinitializer or \hideinitializer 
        !           459: # command in the documentation regardless of this setting.
        !           460: 
        !           461: MAX_INITIALIZER_LINES  = 30
        !           462: 
        !           463: # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
        !           464: # at the bottom of the documentation of classes and structs. If set to YES the 
        !           465: # list will mention the files that were used to generate the documentation.
        !           466: 
        !           467: SHOW_USED_FILES        = NO
        !           468: 
        !           469: # If the sources in your project are distributed over multiple directories 
        !           470: # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
        !           471: # in the documentation. The default is NO.
        !           472: 
        !           473: SHOW_DIRECTORIES       = NO
        !           474: 
        !           475: # Set the SHOW_FILES tag to NO to disable the generation of the Files page. 
        !           476: # This will remove the Files entry from the Quick Index and from the 
        !           477: # Folder Tree View (if specified). The default is YES.
        !           478: 
        !           479: SHOW_FILES             = YES
        !           480: 
        !           481: # Set the SHOW_NAMESPACES tag to NO to disable the generation of the 
        !           482: # Namespaces page. 
        !           483: # This will remove the Namespaces entry from the Quick Index 
        !           484: # and from the Folder Tree View (if specified). The default is YES.
        !           485: 
        !           486: SHOW_NAMESPACES        = NO
        !           487: 
        !           488: # The FILE_VERSION_FILTER tag can be used to specify a program or script that 
        !           489: # doxygen should invoke to get the current version for each file (typically from 
        !           490: # the version control system). Doxygen will invoke the program by executing (via 
        !           491: # popen()) the command <command> <input-file>, where <command> is the value of 
        !           492: # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
        !           493: # provided by doxygen. Whatever the program writes to standard output 
        !           494: # is used as the file version. See the manual for examples.
        !           495: 
        !           496: FILE_VERSION_FILTER    = 
        !           497: 
        !           498: # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by 
        !           499: # doxygen. The layout file controls the global structure of the generated output files 
        !           500: # in an output format independent way. The create the layout file that represents 
        !           501: # doxygen's defaults, run doxygen with the -l option. You can optionally specify a 
        !           502: # file name after the option, if omitted DoxygenLayout.xml will be used as the name 
        !           503: # of the layout file.
        !           504: 
        !           505: LAYOUT_FILE            = 
        !           506: 
        !           507: #---------------------------------------------------------------------------
        !           508: # configuration options related to warning and progress messages
        !           509: #---------------------------------------------------------------------------
        !           510: 
        !           511: # The QUIET tag can be used to turn on/off the messages that are generated 
        !           512: # by doxygen. Possible values are YES and NO. If left blank NO is used.
        !           513: 
        !           514: QUIET                  = YES
        !           515: 
        !           516: # The WARNINGS tag can be used to turn on/off the warning messages that are 
        !           517: # generated by doxygen. Possible values are YES and NO. If left blank 
        !           518: # NO is used.
        !           519: 
        !           520: WARNINGS               = YES
        !           521: 
        !           522: # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
        !           523: # for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
        !           524: # automatically be disabled.
        !           525: 
        !           526: WARN_IF_UNDOCUMENTED   = YES
        !           527: 
        !           528: # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
        !           529: # potential errors in the documentation, such as not documenting some 
        !           530: # parameters in a documented function, or documenting parameters that 
        !           531: # don't exist or using markup commands wrongly.
        !           532: 
        !           533: WARN_IF_DOC_ERROR      = YES
        !           534: 
        !           535: # This WARN_NO_PARAMDOC option can be abled to get warnings for 
        !           536: # functions that are documented, but have no documentation for their parameters 
        !           537: # or return value. If set to NO (the default) doxygen will only warn about 
        !           538: # wrong or incomplete parameter documentation, but not about the absence of 
        !           539: # documentation.
        !           540: 
        !           541: WARN_NO_PARAMDOC       = NO
        !           542: 
        !           543: # The WARN_FORMAT tag determines the format of the warning messages that 
        !           544: # doxygen can produce. The string should contain the $file, $line, and $text 
        !           545: # tags, which will be replaced by the file and line number from which the 
        !           546: # warning originated and the warning text. Optionally the format may contain 
        !           547: # $version, which will be replaced by the version of the file (if it could 
        !           548: # be obtained via FILE_VERSION_FILTER)
        !           549: 
        !           550: WARN_FORMAT            = "$file:$line: $text"
        !           551: 
        !           552: # The WARN_LOGFILE tag can be used to specify a file to which warning 
        !           553: # and error messages should be written. If left blank the output is written 
        !           554: # to stderr.
        !           555: 
        !           556: WARN_LOGFILE           = 
        !           557: 
        !           558: #---------------------------------------------------------------------------
        !           559: # configuration options related to the input files
        !           560: #---------------------------------------------------------------------------
        !           561: 
        !           562: # The INPUT tag can be used to specify the files and/or directories that contain 
        !           563: # documented source files. You may enter file names like "myfile.cpp" or 
        !           564: # directories like "/usr/src/myproject". Separate the files or directories 
        !           565: # with spaces.
        !           566: 
        !           567: INPUT                  = ../src/confuse.c \
        !           568:                          ../src/confuse.h
        !           569: 
        !           570: # This tag can be used to specify the character encoding of the source files 
        !           571: # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
        !           572: # also the default input encoding. Doxygen uses libiconv (or the iconv built 
        !           573: # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
        !           574: # the list of possible encodings.
        !           575: 
        !           576: INPUT_ENCODING         = UTF-8
        !           577: 
        !           578: # If the value of the INPUT tag contains directories, you can use the 
        !           579: # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
        !           580: # and *.h) to filter out the source-files in the directories. If left 
        !           581: # blank the following patterns are tested: 
        !           582: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
        !           583: # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
        !           584: 
        !           585: FILE_PATTERNS          = 
        !           586: 
        !           587: # The RECURSIVE tag can be used to turn specify whether or not subdirectories 
        !           588: # should be searched for input files as well. Possible values are YES and NO. 
        !           589: # If left blank NO is used.
        !           590: 
        !           591: RECURSIVE              = NO
        !           592: 
        !           593: # The EXCLUDE tag can be used to specify files and/or directories that should 
        !           594: # excluded from the INPUT source files. This way you can easily exclude a 
        !           595: # subdirectory from a directory tree whose root is specified with the INPUT tag.
        !           596: 
        !           597: EXCLUDE                = 
        !           598: 
        !           599: # The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
        !           600: # directories that are symbolic links (a Unix filesystem feature) are excluded 
        !           601: # from the input.
        !           602: 
        !           603: EXCLUDE_SYMLINKS       = NO
        !           604: 
        !           605: # If the value of the INPUT tag contains directories, you can use the 
        !           606: # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
        !           607: # certain files from those directories. Note that the wildcards are matched 
        !           608: # against the file with absolute path, so to exclude all test directories 
        !           609: # for example use the pattern */test/*
        !           610: 
        !           611: EXCLUDE_PATTERNS       = 
        !           612: 
        !           613: # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 
        !           614: # (namespaces, classes, functions, etc.) that should be excluded from the 
        !           615: # output. The symbol name can be a fully qualified name, a word, or if the 
        !           616: # wildcard * is used, a substring. Examples: ANamespace, AClass, 
        !           617: # AClass::ANamespace, ANamespace::*Test
        !           618: 
        !           619: EXCLUDE_SYMBOLS        = 
        !           620: 
        !           621: # The EXAMPLE_PATH tag can be used to specify one or more files or 
        !           622: # directories that contain example code fragments that are included (see 
        !           623: # the \include command).
        !           624: 
        !           625: EXAMPLE_PATH           = ../examples
        !           626: 
        !           627: # If the value of the EXAMPLE_PATH tag contains directories, you can use the 
        !           628: # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
        !           629: # and *.h) to filter out the source-files in the directories. If left 
        !           630: # blank all files are included.
        !           631: 
        !           632: EXAMPLE_PATTERNS       = *.c
        !           633: 
        !           634: # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
        !           635: # searched for input files to be used with the \include or \dontinclude 
        !           636: # commands irrespective of the value of the RECURSIVE tag. 
        !           637: # Possible values are YES and NO. If left blank NO is used.
        !           638: 
        !           639: EXAMPLE_RECURSIVE      = NO
        !           640: 
        !           641: # The IMAGE_PATH tag can be used to specify one or more files or 
        !           642: # directories that contain image that are included in the documentation (see 
        !           643: # the \image command).
        !           644: 
        !           645: IMAGE_PATH             = 
        !           646: 
        !           647: # The INPUT_FILTER tag can be used to specify a program that doxygen should 
        !           648: # invoke to filter for each input file. Doxygen will invoke the filter program 
        !           649: # by executing (via popen()) the command <filter> <input-file>, where <filter> 
        !           650: # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
        !           651: # input file. Doxygen will then use the output that the filter program writes 
        !           652: # to standard output. 
        !           653: # If FILTER_PATTERNS is specified, this tag will be 
        !           654: # ignored.
        !           655: 
        !           656: INPUT_FILTER           = 
        !           657: 
        !           658: # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
        !           659: # basis. 
        !           660: # Doxygen will compare the file name with each pattern and apply the 
        !           661: # filter if there is a match. 
        !           662: # The filters are a list of the form: 
        !           663: # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
        !           664: # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
        !           665: # is applied to all files.
        !           666: 
        !           667: FILTER_PATTERNS        = 
        !           668: 
        !           669: # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
        !           670: # INPUT_FILTER) will be used to filter the input files when producing source 
        !           671: # files to browse (i.e. when SOURCE_BROWSER is set to YES).
        !           672: 
        !           673: FILTER_SOURCE_FILES    = NO
        !           674: 
        !           675: #---------------------------------------------------------------------------
        !           676: # configuration options related to source browsing
        !           677: #---------------------------------------------------------------------------
        !           678: 
        !           679: # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
        !           680: # be generated. Documented entities will be cross-referenced with these sources. 
        !           681: # Note: To get rid of all source code in the generated output, make sure also 
        !           682: # VERBATIM_HEADERS is set to NO.
        !           683: 
        !           684: SOURCE_BROWSER         = NO
        !           685: 
        !           686: # Setting the INLINE_SOURCES tag to YES will include the body 
        !           687: # of functions and classes directly in the documentation.
        !           688: 
        !           689: INLINE_SOURCES         = NO
        !           690: 
        !           691: # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
        !           692: # doxygen to hide any special comment blocks from generated source code 
        !           693: # fragments. Normal C and C++ comments will always remain visible.
        !           694: 
        !           695: STRIP_CODE_COMMENTS    = YES
        !           696: 
        !           697: # If the REFERENCED_BY_RELATION tag is set to YES 
        !           698: # then for each documented function all documented 
        !           699: # functions referencing it will be listed.
        !           700: 
        !           701: REFERENCED_BY_RELATION = YES
        !           702: 
        !           703: # If the REFERENCES_RELATION tag is set to YES 
        !           704: # then for each documented function all documented entities 
        !           705: # called/used by that function will be listed.
        !           706: 
        !           707: REFERENCES_RELATION    = YES
        !           708: 
        !           709: # If the REFERENCES_LINK_SOURCE tag is set to YES (the default) 
        !           710: # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from 
        !           711: # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will 
        !           712: # link to the source code. 
        !           713: # Otherwise they will link to the documentation.
        !           714: 
        !           715: REFERENCES_LINK_SOURCE = YES
        !           716: 
        !           717: # If the USE_HTAGS tag is set to YES then the references to source code 
        !           718: # will point to the HTML generated by the htags(1) tool instead of doxygen 
        !           719: # built-in source browser. The htags tool is part of GNU's global source 
        !           720: # tagging system (see http://www.gnu.org/software/global/global.html). You 
        !           721: # will need version 4.8.6 or higher.
        !           722: 
        !           723: USE_HTAGS              = NO
        !           724: 
        !           725: # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
        !           726: # will generate a verbatim copy of the header file for each class for 
        !           727: # which an include is specified. Set to NO to disable this.
        !           728: 
        !           729: VERBATIM_HEADERS       = YES
        !           730: 
        !           731: #---------------------------------------------------------------------------
        !           732: # configuration options related to the alphabetical class index
        !           733: #---------------------------------------------------------------------------
        !           734: 
        !           735: # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
        !           736: # of all compounds will be generated. Enable this if the project 
        !           737: # contains a lot of classes, structs, unions or interfaces.
        !           738: 
        !           739: ALPHABETICAL_INDEX     = NO
        !           740: 
        !           741: # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
        !           742: # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
        !           743: # in which this list will be split (can be a number in the range [1..20])
        !           744: 
        !           745: COLS_IN_ALPHA_INDEX    = 5
        !           746: 
        !           747: # In case all classes in a project start with a common prefix, all 
        !           748: # classes will be put under the same header in the alphabetical index. 
        !           749: # The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
        !           750: # should be ignored while generating the index headers.
        !           751: 
        !           752: IGNORE_PREFIX          = 
        !           753: 
        !           754: #---------------------------------------------------------------------------
        !           755: # configuration options related to the HTML output
        !           756: #---------------------------------------------------------------------------
        !           757: 
        !           758: # If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
        !           759: # generate HTML output.
        !           760: 
        !           761: GENERATE_HTML          = YES
        !           762: 
        !           763: # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
        !           764: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
        !           765: # put in front of it. If left blank `html' will be used as the default path.
        !           766: 
        !           767: HTML_OUTPUT            = html
        !           768: 
        !           769: # The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
        !           770: # each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
        !           771: # doxygen will generate files with .html extension.
        !           772: 
        !           773: HTML_FILE_EXTENSION    = .html
        !           774: 
        !           775: # The HTML_HEADER tag can be used to specify a personal HTML header for 
        !           776: # each generated HTML page. If it is left blank doxygen will generate a 
        !           777: # standard header.
        !           778: 
        !           779: HTML_HEADER            = doxygen-header.html
        !           780: 
        !           781: # The HTML_FOOTER tag can be used to specify a personal HTML footer for 
        !           782: # each generated HTML page. If it is left blank doxygen will generate a 
        !           783: # standard footer.
        !           784: 
        !           785: HTML_FOOTER            = doxygen-footer.html
        !           786: 
        !           787: # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
        !           788: # style sheet that is used by each HTML page. It can be used to 
        !           789: # fine-tune the look of the HTML output. If the tag is left blank doxygen 
        !           790: # will generate a default style sheet. Note that doxygen will try to copy 
        !           791: # the style sheet file to the HTML output directory, so don't put your own 
        !           792: # stylesheet in the HTML output directory as well, or it will be erased!
        !           793: 
        !           794: HTML_STYLESHEET        = tutorial.css
        !           795: 
        !           796: # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
        !           797: # files or namespaces will be aligned in HTML using tables. If set to 
        !           798: # NO a bullet list will be used.
        !           799: 
        !           800: HTML_ALIGN_MEMBERS     = YES
        !           801: 
        !           802: # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 
        !           803: # documentation will contain sections that can be hidden and shown after the 
        !           804: # page has loaded. For this to work a browser that supports 
        !           805: # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 
        !           806: # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
        !           807: 
        !           808: HTML_DYNAMIC_SECTIONS  = NO
        !           809: 
        !           810: # If the GENERATE_DOCSET tag is set to YES, additional index files 
        !           811: # will be generated that can be used as input for Apple's Xcode 3 
        !           812: # integrated development environment, introduced with OSX 10.5 (Leopard). 
        !           813: # To create a documentation set, doxygen will generate a Makefile in the 
        !           814: # HTML output directory. Running make will produce the docset in that 
        !           815: # directory and running "make install" will install the docset in 
        !           816: # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
        !           817: # it at startup. 
        !           818: # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
        !           819: 
        !           820: GENERATE_DOCSET        = NO
        !           821: 
        !           822: # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 
        !           823: # feed. A documentation feed provides an umbrella under which multiple 
        !           824: # documentation sets from a single provider (such as a company or product suite) 
        !           825: # can be grouped.
        !           826: 
        !           827: DOCSET_FEEDNAME        = "Doxygen generated docs"
        !           828: 
        !           829: # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 
        !           830: # should uniquely identify the documentation set bundle. This should be a 
        !           831: # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 
        !           832: # will append .docset to the name.
        !           833: 
        !           834: DOCSET_BUNDLE_ID       = org.doxygen.Project
        !           835: 
        !           836: # If the GENERATE_HTMLHELP tag is set to YES, additional index files 
        !           837: # will be generated that can be used as input for tools like the 
        !           838: # Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 
        !           839: # of the generated HTML documentation.
        !           840: 
        !           841: GENERATE_HTMLHELP      = NO
        !           842: 
        !           843: # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
        !           844: # be used to specify the file name of the resulting .chm file. You 
        !           845: # can add a path in front of the file if the result should not be 
        !           846: # written to the html output directory.
        !           847: 
        !           848: CHM_FILE               = 
        !           849: 
        !           850: # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
        !           851: # be used to specify the location (absolute path including file name) of 
        !           852: # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
        !           853: # the HTML help compiler on the generated index.hhp.
        !           854: 
        !           855: HHC_LOCATION           = 
        !           856: 
        !           857: # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
        !           858: # controls if a separate .chi index file is generated (YES) or that 
        !           859: # it should be included in the master .chm file (NO).
        !           860: 
        !           861: GENERATE_CHI           = NO
        !           862: 
        !           863: # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING 
        !           864: # is used to encode HtmlHelp index (hhk), content (hhc) and project file 
        !           865: # content.
        !           866: 
        !           867: CHM_INDEX_ENCODING     = 
        !           868: 
        !           869: # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
        !           870: # controls whether a binary table of contents is generated (YES) or a 
        !           871: # normal table of contents (NO) in the .chm file.
        !           872: 
        !           873: BINARY_TOC             = NO
        !           874: 
        !           875: # The TOC_EXPAND flag can be set to YES to add extra items for group members 
        !           876: # to the contents of the HTML help documentation and to the tree view.
        !           877: 
        !           878: TOC_EXPAND             = NO
        !           879: 
        !           880: # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER 
        !           881: # are set, an additional index file will be generated that can be used as input for 
        !           882: # Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated 
        !           883: # HTML documentation.
        !           884: 
        !           885: GENERATE_QHP           = NO
        !           886: 
        !           887: # If the QHG_LOCATION tag is specified, the QCH_FILE tag can 
        !           888: # be used to specify the file name of the resulting .qch file. 
        !           889: # The path specified is relative to the HTML output folder.
        !           890: 
        !           891: QCH_FILE               = 
        !           892: 
        !           893: # The QHP_NAMESPACE tag specifies the namespace to use when generating 
        !           894: # Qt Help Project output. For more information please see 
        !           895: # http://doc.trolltech.com/qthelpproject.html#namespace
        !           896: 
        !           897: QHP_NAMESPACE          = 
        !           898: 
        !           899: # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating 
        !           900: # Qt Help Project output. For more information please see 
        !           901: # http://doc.trolltech.com/qthelpproject.html#virtual-folders
        !           902: 
        !           903: QHP_VIRTUAL_FOLDER     = doc
        !           904: 
        !           905: # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. 
        !           906: # For more information please see 
        !           907: # http://doc.trolltech.com/qthelpproject.html#custom-filters
        !           908: 
        !           909: QHP_CUST_FILTER_NAME   = 
        !           910: 
        !           911: # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see 
        !           912: # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
        !           913: 
        !           914: QHP_CUST_FILTER_ATTRS  = 
        !           915: 
        !           916: # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's 
        !           917: # filter section matches. 
        !           918: # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
        !           919: 
        !           920: QHP_SECT_FILTER_ATTRS  = 
        !           921: 
        !           922: # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can 
        !           923: # be used to specify the location of Qt's qhelpgenerator. 
        !           924: # If non-empty doxygen will try to run qhelpgenerator on the generated 
        !           925: # .qhp file.
        !           926: 
        !           927: QHG_LOCATION           = 
        !           928: 
        !           929: # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
        !           930: # top of each HTML page. The value NO (the default) enables the index and 
        !           931: # the value YES disables it.
        !           932: 
        !           933: DISABLE_INDEX          = NO
        !           934: 
        !           935: # This tag can be used to set the number of enum values (range [1..20]) 
        !           936: # that doxygen will group on one line in the generated HTML documentation.
        !           937: 
        !           938: ENUM_VALUES_PER_LINE   = 4
        !           939: 
        !           940: # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index 
        !           941: # structure should be generated to display hierarchical information. 
        !           942: # If the tag value is set to FRAME, a side panel will be generated 
        !           943: # containing a tree-like index structure (just like the one that 
        !           944: # is generated for HTML Help). For this to work a browser that supports 
        !           945: # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
        !           946: # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
        !           947: # probably better off using the HTML help feature. Other possible values 
        !           948: # for this tag are: HIERARCHIES, which will generate the Groups, Directories, 
        !           949: # and Class Hierarchy pages using a tree view instead of an ordered list; 
        !           950: # ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which 
        !           951: # disables this behavior completely. For backwards compatibility with previous 
        !           952: # releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE 
        !           953: # respectively.
        !           954: 
        !           955: GENERATE_TREEVIEW      = NO
        !           956: 
        !           957: # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
        !           958: # used to set the initial width (in pixels) of the frame in which the tree 
        !           959: # is shown.
        !           960: 
        !           961: TREEVIEW_WIDTH         = 250
        !           962: 
        !           963: # Use this tag to change the font size of Latex formulas included 
        !           964: # as images in the HTML documentation. The default is 10. Note that 
        !           965: # when you change the font size after a successful doxygen run you need 
        !           966: # to manually remove any form_*.png images from the HTML output directory 
        !           967: # to force them to be regenerated.
        !           968: 
        !           969: FORMULA_FONTSIZE       = 10
        !           970: 
        !           971: #---------------------------------------------------------------------------
        !           972: # configuration options related to the LaTeX output
        !           973: #---------------------------------------------------------------------------
        !           974: 
        !           975: # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
        !           976: # generate Latex output.
        !           977: 
        !           978: GENERATE_LATEX         = NO
        !           979: 
        !           980: # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
        !           981: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
        !           982: # put in front of it. If left blank `latex' will be used as the default path.
        !           983: 
        !           984: LATEX_OUTPUT           = latex
        !           985: 
        !           986: # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
        !           987: # invoked. If left blank `latex' will be used as the default command name.
        !           988: 
        !           989: LATEX_CMD_NAME         = latex
        !           990: 
        !           991: # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
        !           992: # generate index for LaTeX. If left blank `makeindex' will be used as the 
        !           993: # default command name.
        !           994: 
        !           995: MAKEINDEX_CMD_NAME     = makeindex
        !           996: 
        !           997: # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
        !           998: # LaTeX documents. This may be useful for small projects and may help to 
        !           999: # save some trees in general.
        !          1000: 
        !          1001: COMPACT_LATEX          = NO
        !          1002: 
        !          1003: # The PAPER_TYPE tag can be used to set the paper type that is used 
        !          1004: # by the printer. Possible values are: a4, a4wide, letter, legal and 
        !          1005: # executive. If left blank a4wide will be used.
        !          1006: 
        !          1007: PAPER_TYPE             = a4
        !          1008: 
        !          1009: # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
        !          1010: # packages that should be included in the LaTeX output.
        !          1011: 
        !          1012: EXTRA_PACKAGES         = 
        !          1013: 
        !          1014: # The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
        !          1015: # the generated latex document. The header should contain everything until 
        !          1016: # the first chapter. If it is left blank doxygen will generate a 
        !          1017: # standard header. Notice: only use this tag if you know what you are doing!
        !          1018: 
        !          1019: LATEX_HEADER           = 
        !          1020: 
        !          1021: # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
        !          1022: # is prepared for conversion to pdf (using ps2pdf). The pdf file will 
        !          1023: # contain links (just like the HTML output) instead of page references 
        !          1024: # This makes the output suitable for online browsing using a pdf viewer.
        !          1025: 
        !          1026: PDF_HYPERLINKS         = NO
        !          1027: 
        !          1028: # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
        !          1029: # plain latex in the generated Makefile. Set this option to YES to get a 
        !          1030: # higher quality PDF documentation.
        !          1031: 
        !          1032: USE_PDFLATEX           = NO
        !          1033: 
        !          1034: # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
        !          1035: # command to the generated LaTeX files. This will instruct LaTeX to keep 
        !          1036: # running if errors occur, instead of asking the user for help. 
        !          1037: # This option is also used when generating formulas in HTML.
        !          1038: 
        !          1039: LATEX_BATCHMODE        = NO
        !          1040: 
        !          1041: # If LATEX_HIDE_INDICES is set to YES then doxygen will not 
        !          1042: # include the index chapters (such as File Index, Compound Index, etc.) 
        !          1043: # in the output.
        !          1044: 
        !          1045: LATEX_HIDE_INDICES     = NO
        !          1046: 
        !          1047: #---------------------------------------------------------------------------
        !          1048: # configuration options related to the RTF output
        !          1049: #---------------------------------------------------------------------------
        !          1050: 
        !          1051: # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
        !          1052: # The RTF output is optimized for Word 97 and may not look very pretty with 
        !          1053: # other RTF readers or editors.
        !          1054: 
        !          1055: GENERATE_RTF           = NO
        !          1056: 
        !          1057: # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
        !          1058: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
        !          1059: # put in front of it. If left blank `rtf' will be used as the default path.
        !          1060: 
        !          1061: RTF_OUTPUT             = rtf
        !          1062: 
        !          1063: # If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
        !          1064: # RTF documents. This may be useful for small projects and may help to 
        !          1065: # save some trees in general.
        !          1066: 
        !          1067: COMPACT_RTF            = NO
        !          1068: 
        !          1069: # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
        !          1070: # will contain hyperlink fields. The RTF file will 
        !          1071: # contain links (just like the HTML output) instead of page references. 
        !          1072: # This makes the output suitable for online browsing using WORD or other 
        !          1073: # programs which support those fields. 
        !          1074: # Note: wordpad (write) and others do not support links.
        !          1075: 
        !          1076: RTF_HYPERLINKS         = NO
        !          1077: 
        !          1078: # Load stylesheet definitions from file. Syntax is similar to doxygen's 
        !          1079: # config file, i.e. a series of assignments. You only have to provide 
        !          1080: # replacements, missing definitions are set to their default value.
        !          1081: 
        !          1082: RTF_STYLESHEET_FILE    = 
        !          1083: 
        !          1084: # Set optional variables used in the generation of an rtf document. 
        !          1085: # Syntax is similar to doxygen's config file.
        !          1086: 
        !          1087: RTF_EXTENSIONS_FILE    = 
        !          1088: 
        !          1089: #---------------------------------------------------------------------------
        !          1090: # configuration options related to the man page output
        !          1091: #---------------------------------------------------------------------------
        !          1092: 
        !          1093: # If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
        !          1094: # generate man pages
        !          1095: 
        !          1096: GENERATE_MAN           = YES
        !          1097: 
        !          1098: # The MAN_OUTPUT tag is used to specify where the man pages will be put. 
        !          1099: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
        !          1100: # put in front of it. If left blank `man' will be used as the default path.
        !          1101: 
        !          1102: MAN_OUTPUT             = man
        !          1103: 
        !          1104: # The MAN_EXTENSION tag determines the extension that is added to 
        !          1105: # the generated man pages (default is the subroutine's section .3)
        !          1106: 
        !          1107: MAN_EXTENSION          = .3
        !          1108: 
        !          1109: # If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
        !          1110: # then it will generate one additional man file for each entity 
        !          1111: # documented in the real man page(s). These additional files 
        !          1112: # only source the real man page, but without them the man command 
        !          1113: # would be unable to find the correct page. The default is NO.
        !          1114: 
        !          1115: MAN_LINKS              = NO
        !          1116: 
        !          1117: #---------------------------------------------------------------------------
        !          1118: # configuration options related to the XML output
        !          1119: #---------------------------------------------------------------------------
        !          1120: 
        !          1121: # If the GENERATE_XML tag is set to YES Doxygen will 
        !          1122: # generate an XML file that captures the structure of 
        !          1123: # the code including all documentation.
        !          1124: 
        !          1125: GENERATE_XML           = NO
        !          1126: 
        !          1127: # The XML_OUTPUT tag is used to specify where the XML pages will be put. 
        !          1128: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
        !          1129: # put in front of it. If left blank `xml' will be used as the default path.
        !          1130: 
        !          1131: XML_OUTPUT             = xml
        !          1132: 
        !          1133: # The XML_SCHEMA tag can be used to specify an XML schema, 
        !          1134: # which can be used by a validating XML parser to check the 
        !          1135: # syntax of the XML files.
        !          1136: 
        !          1137: XML_SCHEMA             = 
        !          1138: 
        !          1139: # The XML_DTD tag can be used to specify an XML DTD, 
        !          1140: # which can be used by a validating XML parser to check the 
        !          1141: # syntax of the XML files.
        !          1142: 
        !          1143: XML_DTD                = 
        !          1144: 
        !          1145: # If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
        !          1146: # dump the program listings (including syntax highlighting 
        !          1147: # and cross-referencing information) to the XML output. Note that 
        !          1148: # enabling this will significantly increase the size of the XML output.
        !          1149: 
        !          1150: XML_PROGRAMLISTING     = YES
        !          1151: 
        !          1152: #---------------------------------------------------------------------------
        !          1153: # configuration options for the AutoGen Definitions output
        !          1154: #---------------------------------------------------------------------------
        !          1155: 
        !          1156: # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
        !          1157: # generate an AutoGen Definitions (see autogen.sf.net) file 
        !          1158: # that captures the structure of the code including all 
        !          1159: # documentation. Note that this feature is still experimental 
        !          1160: # and incomplete at the moment.
        !          1161: 
        !          1162: GENERATE_AUTOGEN_DEF   = NO
        !          1163: 
        !          1164: #---------------------------------------------------------------------------
        !          1165: # configuration options related to the Perl module output
        !          1166: #---------------------------------------------------------------------------
        !          1167: 
        !          1168: # If the GENERATE_PERLMOD tag is set to YES Doxygen will 
        !          1169: # generate a Perl module file that captures the structure of 
        !          1170: # the code including all documentation. Note that this 
        !          1171: # feature is still experimental and incomplete at the 
        !          1172: # moment.
        !          1173: 
        !          1174: GENERATE_PERLMOD       = NO
        !          1175: 
        !          1176: # If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
        !          1177: # the necessary Makefile rules, Perl scripts and LaTeX code to be able 
        !          1178: # to generate PDF and DVI output from the Perl module output.
        !          1179: 
        !          1180: PERLMOD_LATEX          = NO
        !          1181: 
        !          1182: # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
        !          1183: # nicely formatted so it can be parsed by a human reader. 
        !          1184: # This is useful 
        !          1185: # if you want to understand what is going on. 
        !          1186: # On the other hand, if this 
        !          1187: # tag is set to NO the size of the Perl module output will be much smaller 
        !          1188: # and Perl will parse it just the same.
        !          1189: 
        !          1190: PERLMOD_PRETTY         = YES
        !          1191: 
        !          1192: # The names of the make variables in the generated doxyrules.make file 
        !          1193: # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
        !          1194: # This is useful so different doxyrules.make files included by the same 
        !          1195: # Makefile don't overwrite each other's variables.
        !          1196: 
        !          1197: PERLMOD_MAKEVAR_PREFIX = 
        !          1198: 
        !          1199: #---------------------------------------------------------------------------
        !          1200: # Configuration options related to the preprocessor   
        !          1201: #---------------------------------------------------------------------------
        !          1202: 
        !          1203: # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
        !          1204: # evaluate all C-preprocessor directives found in the sources and include 
        !          1205: # files.
        !          1206: 
        !          1207: ENABLE_PREPROCESSING   = YES
        !          1208: 
        !          1209: # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
        !          1210: # names in the source code. If set to NO (the default) only conditional 
        !          1211: # compilation will be performed. Macro expansion can be done in a controlled 
        !          1212: # way by setting EXPAND_ONLY_PREDEF to YES.
        !          1213: 
        !          1214: MACRO_EXPANSION        = NO
        !          1215: 
        !          1216: # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
        !          1217: # then the macro expansion is limited to the macros specified with the 
        !          1218: # PREDEFINED and EXPAND_AS_DEFINED tags.
        !          1219: 
        !          1220: EXPAND_ONLY_PREDEF     = NO
        !          1221: 
        !          1222: # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
        !          1223: # in the INCLUDE_PATH (see below) will be search if a #include is found.
        !          1224: 
        !          1225: SEARCH_INCLUDES        = YES
        !          1226: 
        !          1227: # The INCLUDE_PATH tag can be used to specify one or more directories that 
        !          1228: # contain include files that are not input files but should be processed by 
        !          1229: # the preprocessor.
        !          1230: 
        !          1231: INCLUDE_PATH           = 
        !          1232: 
        !          1233: # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
        !          1234: # patterns (like *.h and *.hpp) to filter out the header-files in the 
        !          1235: # directories. If left blank, the patterns specified with FILE_PATTERNS will 
        !          1236: # be used.
        !          1237: 
        !          1238: INCLUDE_FILE_PATTERNS  = 
        !          1239: 
        !          1240: # The PREDEFINED tag can be used to specify one or more macro names that 
        !          1241: # are defined before the preprocessor is started (similar to the -D option of 
        !          1242: # gcc). The argument of the tag is a list of macros of the form: name 
        !          1243: # or name=definition (no spaces). If the definition and the = are 
        !          1244: # omitted =1 is assumed. To prevent a macro definition from being 
        !          1245: # undefined via #undef or recursively expanded use the := operator 
        !          1246: # instead of the = operator.
        !          1247: 
        !          1248: PREDEFINED             = 
        !          1249: 
        !          1250: # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
        !          1251: # this tag can be used to specify a list of macro names that should be expanded. 
        !          1252: # The macro definition that is found in the sources will be used. 
        !          1253: # Use the PREDEFINED tag if you want to use a different macro definition.
        !          1254: 
        !          1255: EXPAND_AS_DEFINED      = 
        !          1256: 
        !          1257: # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
        !          1258: # doxygen's preprocessor will remove all function-like macros that are alone 
        !          1259: # on a line, have an all uppercase name, and do not end with a semicolon. Such 
        !          1260: # function macros are typically used for boiler-plate code, and will confuse 
        !          1261: # the parser if not removed.
        !          1262: 
        !          1263: SKIP_FUNCTION_MACROS   = YES
        !          1264: 
        !          1265: #---------------------------------------------------------------------------
        !          1266: # Configuration::additions related to external references   
        !          1267: #---------------------------------------------------------------------------
        !          1268: 
        !          1269: # The TAGFILES option can be used to specify one or more tagfiles. 
        !          1270: # Optionally an initial location of the external documentation 
        !          1271: # can be added for each tagfile. The format of a tag file without 
        !          1272: # this location is as follows: 
        !          1273: #  
        !          1274: # TAGFILES = file1 file2 ... 
        !          1275: # Adding location for the tag files is done as follows: 
        !          1276: #  
        !          1277: # TAGFILES = file1=loc1 "file2 = loc2" ... 
        !          1278: # where "loc1" and "loc2" can be relative or absolute paths or 
        !          1279: # URLs. If a location is present for each tag, the installdox tool 
        !          1280: # does not have to be run to correct the links. 
        !          1281: # Note that each tag file must have a unique name 
        !          1282: # (where the name does NOT include the path) 
        !          1283: # If a tag file is not located in the directory in which doxygen 
        !          1284: # is run, you must also specify the path to the tagfile here.
        !          1285: 
        !          1286: TAGFILES               = 
        !          1287: 
        !          1288: # When a file name is specified after GENERATE_TAGFILE, doxygen will create 
        !          1289: # a tag file that is based on the input files it reads.
        !          1290: 
        !          1291: GENERATE_TAGFILE       = 
        !          1292: 
        !          1293: # If the ALLEXTERNALS tag is set to YES all external classes will be listed 
        !          1294: # in the class index. If set to NO only the inherited external classes 
        !          1295: # will be listed.
        !          1296: 
        !          1297: ALLEXTERNALS           = NO
        !          1298: 
        !          1299: # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
        !          1300: # in the modules index. If set to NO, only the current project's groups will 
        !          1301: # be listed.
        !          1302: 
        !          1303: EXTERNAL_GROUPS        = YES
        !          1304: 
        !          1305: # The PERL_PATH should be the absolute path and name of the perl script 
        !          1306: # interpreter (i.e. the result of `which perl').
        !          1307: 
        !          1308: PERL_PATH              = /usr/bin/perl
        !          1309: 
        !          1310: #---------------------------------------------------------------------------
        !          1311: # Configuration options related to the dot tool   
        !          1312: #---------------------------------------------------------------------------
        !          1313: 
        !          1314: # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
        !          1315: # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
        !          1316: # or super classes. Setting the tag to NO turns the diagrams off. Note that 
        !          1317: # this option is superseded by the HAVE_DOT option below. This is only a 
        !          1318: # fallback. It is recommended to install and use dot, since it yields more 
        !          1319: # powerful graphs.
        !          1320: 
        !          1321: CLASS_DIAGRAMS         = YES
        !          1322: 
        !          1323: # You can define message sequence charts within doxygen comments using the \msc 
        !          1324: # command. Doxygen will then run the mscgen tool (see 
        !          1325: # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the 
        !          1326: # documentation. The MSCGEN_PATH tag allows you to specify the directory where 
        !          1327: # the mscgen tool resides. If left empty the tool is assumed to be found in the 
        !          1328: # default search path.
        !          1329: 
        !          1330: MSCGEN_PATH            = 
        !          1331: 
        !          1332: # If set to YES, the inheritance and collaboration graphs will hide 
        !          1333: # inheritance and usage relations if the target is undocumented 
        !          1334: # or is not a class.
        !          1335: 
        !          1336: HIDE_UNDOC_RELATIONS   = YES
        !          1337: 
        !          1338: # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
        !          1339: # available from the path. This tool is part of Graphviz, a graph visualization 
        !          1340: # toolkit from AT&T and Lucent Bell Labs. The other options in this section 
        !          1341: # have no effect if this option is set to NO (the default)
        !          1342: 
        !          1343: HAVE_DOT               = NO
        !          1344: 
        !          1345: # By default doxygen will write a font called FreeSans.ttf to the output 
        !          1346: # directory and reference it in all dot files that doxygen generates. This 
        !          1347: # font does not include all possible unicode characters however, so when you need 
        !          1348: # these (or just want a differently looking font) you can specify the font name 
        !          1349: # using DOT_FONTNAME. You need need to make sure dot is able to find the font, 
        !          1350: # which can be done by putting it in a standard location or by setting the 
        !          1351: # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory 
        !          1352: # containing the font.
        !          1353: 
        !          1354: DOT_FONTNAME           = FreeSans
        !          1355: 
        !          1356: # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. 
        !          1357: # The default size is 10pt.
        !          1358: 
        !          1359: DOT_FONTSIZE           = 10
        !          1360: 
        !          1361: # By default doxygen will tell dot to use the output directory to look for the 
        !          1362: # FreeSans.ttf font (which doxygen will put there itself). If you specify a 
        !          1363: # different font using DOT_FONTNAME you can set the path where dot 
        !          1364: # can find it using this tag.
        !          1365: 
        !          1366: DOT_FONTPATH           = 
        !          1367: 
        !          1368: # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
        !          1369: # will generate a graph for each documented class showing the direct and 
        !          1370: # indirect inheritance relations. Setting this tag to YES will force the 
        !          1371: # the CLASS_DIAGRAMS tag to NO.
        !          1372: 
        !          1373: CLASS_GRAPH            = YES
        !          1374: 
        !          1375: # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
        !          1376: # will generate a graph for each documented class showing the direct and 
        !          1377: # indirect implementation dependencies (inheritance, containment, and 
        !          1378: # class references variables) of the class with other documented classes.
        !          1379: 
        !          1380: COLLABORATION_GRAPH    = YES
        !          1381: 
        !          1382: # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
        !          1383: # will generate a graph for groups, showing the direct groups dependencies
        !          1384: 
        !          1385: GROUP_GRAPHS           = YES
        !          1386: 
        !          1387: # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
        !          1388: # collaboration diagrams in a style similar to the OMG's Unified Modeling 
        !          1389: # Language.
        !          1390: 
        !          1391: UML_LOOK               = NO
        !          1392: 
        !          1393: # If set to YES, the inheritance and collaboration graphs will show the 
        !          1394: # relations between templates and their instances.
        !          1395: 
        !          1396: TEMPLATE_RELATIONS     = YES
        !          1397: 
        !          1398: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
        !          1399: # tags are set to YES then doxygen will generate a graph for each documented 
        !          1400: # file showing the direct and indirect include dependencies of the file with 
        !          1401: # other documented files.
        !          1402: 
        !          1403: INCLUDE_GRAPH          = YES
        !          1404: 
        !          1405: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
        !          1406: # HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
        !          1407: # documented header file showing the documented files that directly or 
        !          1408: # indirectly include this file.
        !          1409: 
        !          1410: INCLUDED_BY_GRAPH      = YES
        !          1411: 
        !          1412: # If the CALL_GRAPH and HAVE_DOT options are set to YES then 
        !          1413: # doxygen will generate a call dependency graph for every global function 
        !          1414: # or class method. Note that enabling this option will significantly increase 
        !          1415: # the time of a run. So in most cases it will be better to enable call graphs 
        !          1416: # for selected functions only using the \callgraph command.
        !          1417: 
        !          1418: CALL_GRAPH             = NO
        !          1419: 
        !          1420: # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then 
        !          1421: # doxygen will generate a caller dependency graph for every global function 
        !          1422: # or class method. Note that enabling this option will significantly increase 
        !          1423: # the time of a run. So in most cases it will be better to enable caller 
        !          1424: # graphs for selected functions only using the \callergraph command.
        !          1425: 
        !          1426: CALLER_GRAPH           = NO
        !          1427: 
        !          1428: # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
        !          1429: # will graphical hierarchy of all classes instead of a textual one.
        !          1430: 
        !          1431: GRAPHICAL_HIERARCHY    = YES
        !          1432: 
        !          1433: # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
        !          1434: # then doxygen will show the dependencies a directory has on other directories 
        !          1435: # in a graphical way. The dependency relations are determined by the #include 
        !          1436: # relations between the files in the directories.
        !          1437: 
        !          1438: DIRECTORY_GRAPH        = YES
        !          1439: 
        !          1440: # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
        !          1441: # generated by dot. Possible values are png, jpg, or gif 
        !          1442: # If left blank png will be used.
        !          1443: 
        !          1444: DOT_IMAGE_FORMAT       = png
        !          1445: 
        !          1446: # The tag DOT_PATH can be used to specify the path where the dot tool can be 
        !          1447: # found. If left blank, it is assumed the dot tool can be found in the path.
        !          1448: 
        !          1449: DOT_PATH               = 
        !          1450: 
        !          1451: # The DOTFILE_DIRS tag can be used to specify one or more directories that 
        !          1452: # contain dot files that are included in the documentation (see the 
        !          1453: # \dotfile command).
        !          1454: 
        !          1455: DOTFILE_DIRS           = 
        !          1456: 
        !          1457: # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 
        !          1458: # nodes that will be shown in the graph. If the number of nodes in a graph 
        !          1459: # becomes larger than this value, doxygen will truncate the graph, which is 
        !          1460: # visualized by representing a node as a red box. Note that doxygen if the 
        !          1461: # number of direct children of the root node in a graph is already larger than 
        !          1462: # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note 
        !          1463: # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
        !          1464: 
        !          1465: DOT_GRAPH_MAX_NODES    = 50
        !          1466: 
        !          1467: # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
        !          1468: # graphs generated by dot. A depth value of 3 means that only nodes reachable 
        !          1469: # from the root by following a path via at most 3 edges will be shown. Nodes 
        !          1470: # that lay further from the root node will be omitted. Note that setting this 
        !          1471: # option to 1 or 2 may greatly reduce the computation time needed for large 
        !          1472: # code bases. Also note that the size of a graph can be further restricted by 
        !          1473: # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
        !          1474: 
        !          1475: MAX_DOT_GRAPH_DEPTH    = 0
        !          1476: 
        !          1477: # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
        !          1478: # background. This is disabled by default, because dot on Windows does not 
        !          1479: # seem to support this out of the box. Warning: Depending on the platform used, 
        !          1480: # enabling this option may lead to badly anti-aliased labels on the edges of 
        !          1481: # a graph (i.e. they become hard to read).
        !          1482: 
        !          1483: DOT_TRANSPARENT        = NO
        !          1484: 
        !          1485: # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
        !          1486: # files in one run (i.e. multiple -o and -T options on the command line). This 
        !          1487: # makes dot run faster, but since only newer versions of dot (>1.8.10) 
        !          1488: # support this, this feature is disabled by default.
        !          1489: 
        !          1490: DOT_MULTI_TARGETS      = NO
        !          1491: 
        !          1492: # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
        !          1493: # generate a legend page explaining the meaning of the various boxes and 
        !          1494: # arrows in the dot generated graphs.
        !          1495: 
        !          1496: GENERATE_LEGEND        = YES
        !          1497: 
        !          1498: # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
        !          1499: # remove the intermediate dot files that are used to generate 
        !          1500: # the various graphs.
        !          1501: 
        !          1502: DOT_CLEANUP            = YES
        !          1503: 
        !          1504: #---------------------------------------------------------------------------
        !          1505: # Options related to the search engine
        !          1506: #---------------------------------------------------------------------------
        !          1507: 
        !          1508: # The SEARCHENGINE tag specifies whether or not a search engine should be 
        !          1509: # used. If set to NO the values of all tags below this one will be ignored.
        !          1510: 
        !          1511: SEARCHENGINE           = NO

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>