Annotation of embedaddon/confuse/support/ltmain.sh, revision 1.1

1.1     ! misho       1: # Generated from ltmain.m4sh.
        !             2: 
        !             3: # ltmain.sh (GNU libtool) 2.2.6b
        !             4: # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
        !             5: 
        !             6: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
        !             7: # This is free software; see the source for copying conditions.  There is NO
        !             8: # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
        !             9: 
        !            10: # GNU Libtool is free software; you can redistribute it and/or modify
        !            11: # it under the terms of the GNU General Public License as published by
        !            12: # the Free Software Foundation; either version 2 of the License, or
        !            13: # (at your option) any later version.
        !            14: #
        !            15: # As a special exception to the GNU General Public License,
        !            16: # if you distribute this file as part of a program or library that
        !            17: # is built using GNU Libtool, you may include this file under the
        !            18: # same distribution terms that you use for the rest of that program.
        !            19: #
        !            20: # GNU Libtool is distributed in the hope that it will be useful, but
        !            21: # WITHOUT ANY WARRANTY; without even the implied warranty of
        !            22: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
        !            23: # General Public License for more details.
        !            24: #
        !            25: # You should have received a copy of the GNU General Public License
        !            26: # along with GNU Libtool; see the file COPYING.  If not, a copy
        !            27: # can be downloaded from http://www.gnu.org/licenses/gpl.html,
        !            28: # or obtained by writing to the Free Software Foundation, Inc.,
        !            29: # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
        !            30: 
        !            31: # Usage: $progname [OPTION]... [MODE-ARG]...
        !            32: #
        !            33: # Provide generalized library-building support services.
        !            34: #
        !            35: #     --config             show all configuration variables
        !            36: #     --debug              enable verbose shell tracing
        !            37: # -n, --dry-run            display commands without modifying any files
        !            38: #     --features           display basic configuration information and exit
        !            39: #     --mode=MODE          use operation mode MODE
        !            40: #     --preserve-dup-deps  don't remove duplicate dependency libraries
        !            41: #     --quiet, --silent    don't print informational messages
        !            42: #     --tag=TAG            use configuration variables from tag TAG
        !            43: # -v, --verbose            print informational messages (default)
        !            44: #     --version            print version information
        !            45: # -h, --help               print short or long help message
        !            46: #
        !            47: # MODE must be one of the following:
        !            48: #
        !            49: #       clean              remove files from the build directory
        !            50: #       compile            compile a source file into a libtool object
        !            51: #       execute            automatically set library path, then run a program
        !            52: #       finish             complete the installation of libtool libraries
        !            53: #       install            install libraries or executables
        !            54: #       link               create a library or an executable
        !            55: #       uninstall          remove libraries from an installed directory
        !            56: #
        !            57: # MODE-ARGS vary depending on the MODE.
        !            58: # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
        !            59: #
        !            60: # When reporting a bug, please describe a test case to reproduce it and
        !            61: # include the following information:
        !            62: #
        !            63: #       host-triplet:  $host
        !            64: #       shell:         $SHELL
        !            65: #       compiler:              $LTCC
        !            66: #       compiler flags:                $LTCFLAGS
        !            67: #       linker:                $LD (gnu? $with_gnu_ld)
        !            68: #       $progname:             (GNU libtool) 2.2.6b
        !            69: #       automake:              $automake_version
        !            70: #       autoconf:              $autoconf_version
        !            71: #
        !            72: # Report bugs to <bug-libtool@gnu.org>.
        !            73: 
        !            74: PROGRAM=ltmain.sh
        !            75: PACKAGE=libtool
        !            76: VERSION=2.2.6b
        !            77: TIMESTAMP=""
        !            78: package_revision=1.3017
        !            79: 
        !            80: # Be Bourne compatible
        !            81: if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
        !            82:   emulate sh
        !            83:   NULLCMD=:
        !            84:   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
        !            85:   # is contrary to our usage.  Disable this feature.
        !            86:   alias -g '${1+"$@"}'='"$@"'
        !            87:   setopt NO_GLOB_SUBST
        !            88: else
        !            89:   case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
        !            90: fi
        !            91: BIN_SH=xpg4; export BIN_SH # for Tru64
        !            92: DUALCASE=1; export DUALCASE # for MKS sh
        !            93: 
        !            94: # NLS nuisances: We save the old values to restore during execute mode.
        !            95: # Only set LANG and LC_ALL to C if already set.
        !            96: # These must not be set unconditionally because not all systems understand
        !            97: # e.g. LANG=C (notably SCO).
        !            98: lt_user_locale=
        !            99: lt_safe_locale=
        !           100: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
        !           101: do
        !           102:   eval "if test \"\${$lt_var+set}\" = set; then
        !           103:           save_$lt_var=\$$lt_var
        !           104:           $lt_var=C
        !           105:          export $lt_var
        !           106:          lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
        !           107:          lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
        !           108:        fi"
        !           109: done
        !           110: 
        !           111: $lt_unset CDPATH
        !           112: 
        !           113: 
        !           114: 
        !           115: 
        !           116: 
        !           117: : ${CP="cp -f"}
        !           118: : ${ECHO="echo"}
        !           119: : ${EGREP="/bin/grep -E"}
        !           120: : ${FGREP="/bin/grep -F"}
        !           121: : ${GREP="/bin/grep"}
        !           122: : ${LN_S="ln -s"}
        !           123: : ${MAKE="make"}
        !           124: : ${MKDIR="mkdir"}
        !           125: : ${MV="mv -f"}
        !           126: : ${RM="rm -f"}
        !           127: : ${SED="/bin/sed"}
        !           128: : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
        !           129: : ${Xsed="$SED -e 1s/^X//"}
        !           130: 
        !           131: # Global variables:
        !           132: EXIT_SUCCESS=0
        !           133: EXIT_FAILURE=1
        !           134: EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
        !           135: EXIT_SKIP=77     # $? = 77 is used to indicate a skipped test to automake.
        !           136: 
        !           137: exit_status=$EXIT_SUCCESS
        !           138: 
        !           139: # Make sure IFS has a sensible default
        !           140: lt_nl='
        !           141: '
        !           142: IFS="  $lt_nl"
        !           143: 
        !           144: dirname="s,/[^/]*$,,"
        !           145: basename="s,^.*/,,"
        !           146: 
        !           147: # func_dirname_and_basename file append nondir_replacement
        !           148: # perform func_basename and func_dirname in a single function
        !           149: # call:
        !           150: #   dirname:  Compute the dirname of FILE.  If nonempty,
        !           151: #             add APPEND to the result, otherwise set result
        !           152: #             to NONDIR_REPLACEMENT.
        !           153: #             value returned in "$func_dirname_result"
        !           154: #   basename: Compute filename of FILE.
        !           155: #             value retuned in "$func_basename_result"
        !           156: # Implementation must be kept synchronized with func_dirname
        !           157: # and func_basename. For efficiency, we do not delegate to
        !           158: # those functions but instead duplicate the functionality here.
        !           159: func_dirname_and_basename ()
        !           160: {
        !           161:   # Extract subdirectory from the argument.
        !           162:   func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
        !           163:   if test "X$func_dirname_result" = "X${1}"; then
        !           164:     func_dirname_result="${3}"
        !           165:   else
        !           166:     func_dirname_result="$func_dirname_result${2}"
        !           167:   fi
        !           168:   func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
        !           169: }
        !           170: 
        !           171: # Generated shell functions inserted here.
        !           172: 
        !           173: # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
        !           174: # is ksh but when the shell is invoked as "sh" and the current value of
        !           175: # the _XPG environment variable is not equal to 1 (one), the special
        !           176: # positional parameter $0, within a function call, is the name of the
        !           177: # function.
        !           178: progpath="$0"
        !           179: 
        !           180: # The name of this program:
        !           181: # In the unlikely event $progname began with a '-', it would play havoc with
        !           182: # func_echo (imagine progname=-n), so we prepend ./ in that case:
        !           183: func_dirname_and_basename "$progpath"
        !           184: progname=$func_basename_result
        !           185: case $progname in
        !           186:   -*) progname=./$progname ;;
        !           187: esac
        !           188: 
        !           189: # Make sure we have an absolute path for reexecution:
        !           190: case $progpath in
        !           191:   [\\/]*|[A-Za-z]:\\*) ;;
        !           192:   *[\\/]*)
        !           193:      progdir=$func_dirname_result
        !           194:      progdir=`cd "$progdir" && pwd`
        !           195:      progpath="$progdir/$progname"
        !           196:      ;;
        !           197:   *)
        !           198:      save_IFS="$IFS"
        !           199:      IFS=:
        !           200:      for progdir in $PATH; do
        !           201:        IFS="$save_IFS"
        !           202:        test -x "$progdir/$progname" && break
        !           203:      done
        !           204:      IFS="$save_IFS"
        !           205:      test -n "$progdir" || progdir=`pwd`
        !           206:      progpath="$progdir/$progname"
        !           207:      ;;
        !           208: esac
        !           209: 
        !           210: # Sed substitution that helps us do robust quoting.  It backslashifies
        !           211: # metacharacters that are still active within double-quoted strings.
        !           212: Xsed="${SED}"' -e 1s/^X//'
        !           213: sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
        !           214: 
        !           215: # Same as above, but do not quote variable references.
        !           216: double_quote_subst='s/\(["`\\]\)/\\\1/g'
        !           217: 
        !           218: # Re-`\' parameter expansions in output of double_quote_subst that were
        !           219: # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
        !           220: # in input to double_quote_subst, that '$' was protected from expansion.
        !           221: # Since each input `\' is now two `\'s, look for any number of runs of
        !           222: # four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
        !           223: bs='\\'
        !           224: bs2='\\\\'
        !           225: bs4='\\\\\\\\'
        !           226: dollar='\$'
        !           227: sed_double_backslash="\
        !           228:   s/$bs4/&\\
        !           229: /g
        !           230:   s/^$bs2$dollar/$bs&/
        !           231:   s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
        !           232:   s/\n//g"
        !           233: 
        !           234: # Standard options:
        !           235: opt_dry_run=false
        !           236: opt_help=false
        !           237: opt_quiet=false
        !           238: opt_verbose=false
        !           239: opt_warning=:
        !           240: 
        !           241: # func_echo arg...
        !           242: # Echo program name prefixed message, along with the current mode
        !           243: # name if it has been set yet.
        !           244: func_echo ()
        !           245: {
        !           246:     $ECHO "$progname${mode+: }$mode: $*"
        !           247: }
        !           248: 
        !           249: # func_verbose arg...
        !           250: # Echo program name prefixed message in verbose mode only.
        !           251: func_verbose ()
        !           252: {
        !           253:     $opt_verbose && func_echo ${1+"$@"}
        !           254: 
        !           255:     # A bug in bash halts the script if the last line of a function
        !           256:     # fails when set -e is in force, so we need another command to
        !           257:     # work around that:
        !           258:     :
        !           259: }
        !           260: 
        !           261: # func_error arg...
        !           262: # Echo program name prefixed message to standard error.
        !           263: func_error ()
        !           264: {
        !           265:     $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
        !           266: }
        !           267: 
        !           268: # func_warning arg...
        !           269: # Echo program name prefixed warning message to standard error.
        !           270: func_warning ()
        !           271: {
        !           272:     $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
        !           273: 
        !           274:     # bash bug again:
        !           275:     :
        !           276: }
        !           277: 
        !           278: # func_fatal_error arg...
        !           279: # Echo program name prefixed message to standard error, and exit.
        !           280: func_fatal_error ()
        !           281: {
        !           282:     func_error ${1+"$@"}
        !           283:     exit $EXIT_FAILURE
        !           284: }
        !           285: 
        !           286: # func_fatal_help arg...
        !           287: # Echo program name prefixed message to standard error, followed by
        !           288: # a help hint, and exit.
        !           289: func_fatal_help ()
        !           290: {
        !           291:     func_error ${1+"$@"}
        !           292:     func_fatal_error "$help"
        !           293: }
        !           294: help="Try \`$progname --help' for more information."  ## default
        !           295: 
        !           296: 
        !           297: # func_grep expression filename
        !           298: # Check whether EXPRESSION matches any line of FILENAME, without output.
        !           299: func_grep ()
        !           300: {
        !           301:     $GREP "$1" "$2" >/dev/null 2>&1
        !           302: }
        !           303: 
        !           304: 
        !           305: # func_mkdir_p directory-path
        !           306: # Make sure the entire path to DIRECTORY-PATH is available.
        !           307: func_mkdir_p ()
        !           308: {
        !           309:     my_directory_path="$1"
        !           310:     my_dir_list=
        !           311: 
        !           312:     if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
        !           313: 
        !           314:       # Protect directory names starting with `-'
        !           315:       case $my_directory_path in
        !           316:         -*) my_directory_path="./$my_directory_path" ;;
        !           317:       esac
        !           318: 
        !           319:       # While some portion of DIR does not yet exist...
        !           320:       while test ! -d "$my_directory_path"; do
        !           321:         # ...make a list in topmost first order.  Use a colon delimited
        !           322:        # list incase some portion of path contains whitespace.
        !           323:         my_dir_list="$my_directory_path:$my_dir_list"
        !           324: 
        !           325:         # If the last portion added has no slash in it, the list is done
        !           326:         case $my_directory_path in */*) ;; *) break ;; esac
        !           327: 
        !           328:         # ...otherwise throw away the child directory and loop
        !           329:         my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
        !           330:       done
        !           331:       my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
        !           332: 
        !           333:       save_mkdir_p_IFS="$IFS"; IFS=':'
        !           334:       for my_dir in $my_dir_list; do
        !           335:        IFS="$save_mkdir_p_IFS"
        !           336:         # mkdir can fail with a `File exist' error if two processes
        !           337:         # try to create one of the directories concurrently.  Don't
        !           338:         # stop in that case!
        !           339:         $MKDIR "$my_dir" 2>/dev/null || :
        !           340:       done
        !           341:       IFS="$save_mkdir_p_IFS"
        !           342: 
        !           343:       # Bail out if we (or some other process) failed to create a directory.
        !           344:       test -d "$my_directory_path" || \
        !           345:         func_fatal_error "Failed to create \`$1'"
        !           346:     fi
        !           347: }
        !           348: 
        !           349: 
        !           350: # func_mktempdir [string]
        !           351: # Make a temporary directory that won't clash with other running
        !           352: # libtool processes, and avoids race conditions if possible.  If
        !           353: # given, STRING is the basename for that directory.
        !           354: func_mktempdir ()
        !           355: {
        !           356:     my_template="${TMPDIR-/tmp}/${1-$progname}"
        !           357: 
        !           358:     if test "$opt_dry_run" = ":"; then
        !           359:       # Return a directory name, but don't create it in dry-run mode
        !           360:       my_tmpdir="${my_template}-$$"
        !           361:     else
        !           362: 
        !           363:       # If mktemp works, use that first and foremost
        !           364:       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
        !           365: 
        !           366:       if test ! -d "$my_tmpdir"; then
        !           367:         # Failing that, at least try and use $RANDOM to avoid a race
        !           368:         my_tmpdir="${my_template}-${RANDOM-0}$$"
        !           369: 
        !           370:         save_mktempdir_umask=`umask`
        !           371:         umask 0077
        !           372:         $MKDIR "$my_tmpdir"
        !           373:         umask $save_mktempdir_umask
        !           374:       fi
        !           375: 
        !           376:       # If we're not in dry-run mode, bomb out on failure
        !           377:       test -d "$my_tmpdir" || \
        !           378:         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
        !           379:     fi
        !           380: 
        !           381:     $ECHO "X$my_tmpdir" | $Xsed
        !           382: }
        !           383: 
        !           384: 
        !           385: # func_quote_for_eval arg
        !           386: # Aesthetically quote ARG to be evaled later.
        !           387: # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
        !           388: # is double-quoted, suitable for a subsequent eval, whereas
        !           389: # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
        !           390: # which are still active within double quotes backslashified.
        !           391: func_quote_for_eval ()
        !           392: {
        !           393:     case $1 in
        !           394:       *[\\\`\"\$]*)
        !           395:        func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
        !           396:       *)
        !           397:         func_quote_for_eval_unquoted_result="$1" ;;
        !           398:     esac
        !           399: 
        !           400:     case $func_quote_for_eval_unquoted_result in
        !           401:       # Double-quote args containing shell metacharacters to delay
        !           402:       # word splitting, command substitution and and variable
        !           403:       # expansion for a subsequent eval.
        !           404:       # Many Bourne shells cannot handle close brackets correctly
        !           405:       # in scan sets, so we specify it separately.
        !           406:       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
        !           407:         func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
        !           408:         ;;
        !           409:       *)
        !           410:         func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
        !           411:     esac
        !           412: }
        !           413: 
        !           414: 
        !           415: # func_quote_for_expand arg
        !           416: # Aesthetically quote ARG to be evaled later; same as above,
        !           417: # but do not quote variable references.
        !           418: func_quote_for_expand ()
        !           419: {
        !           420:     case $1 in
        !           421:       *[\\\`\"]*)
        !           422:        my_arg=`$ECHO "X$1" | $Xsed \
        !           423:            -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
        !           424:       *)
        !           425:         my_arg="$1" ;;
        !           426:     esac
        !           427: 
        !           428:     case $my_arg in
        !           429:       # Double-quote args containing shell metacharacters to delay
        !           430:       # word splitting and command substitution for a subsequent eval.
        !           431:       # Many Bourne shells cannot handle close brackets correctly
        !           432:       # in scan sets, so we specify it separately.
        !           433:       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
        !           434:         my_arg="\"$my_arg\""
        !           435:         ;;
        !           436:     esac
        !           437: 
        !           438:     func_quote_for_expand_result="$my_arg"
        !           439: }
        !           440: 
        !           441: 
        !           442: # func_show_eval cmd [fail_exp]
        !           443: # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
        !           444: # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
        !           445: # is given, then evaluate it.
        !           446: func_show_eval ()
        !           447: {
        !           448:     my_cmd="$1"
        !           449:     my_fail_exp="${2-:}"
        !           450: 
        !           451:     ${opt_silent-false} || {
        !           452:       func_quote_for_expand "$my_cmd"
        !           453:       eval "func_echo $func_quote_for_expand_result"
        !           454:     }
        !           455: 
        !           456:     if ${opt_dry_run-false}; then :; else
        !           457:       eval "$my_cmd"
        !           458:       my_status=$?
        !           459:       if test "$my_status" -eq 0; then :; else
        !           460:        eval "(exit $my_status); $my_fail_exp"
        !           461:       fi
        !           462:     fi
        !           463: }
        !           464: 
        !           465: 
        !           466: # func_show_eval_locale cmd [fail_exp]
        !           467: # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
        !           468: # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
        !           469: # is given, then evaluate it.  Use the saved locale for evaluation.
        !           470: func_show_eval_locale ()
        !           471: {
        !           472:     my_cmd="$1"
        !           473:     my_fail_exp="${2-:}"
        !           474: 
        !           475:     ${opt_silent-false} || {
        !           476:       func_quote_for_expand "$my_cmd"
        !           477:       eval "func_echo $func_quote_for_expand_result"
        !           478:     }
        !           479: 
        !           480:     if ${opt_dry_run-false}; then :; else
        !           481:       eval "$lt_user_locale
        !           482:            $my_cmd"
        !           483:       my_status=$?
        !           484:       eval "$lt_safe_locale"
        !           485:       if test "$my_status" -eq 0; then :; else
        !           486:        eval "(exit $my_status); $my_fail_exp"
        !           487:       fi
        !           488:     fi
        !           489: }
        !           490: 
        !           491: 
        !           492: 
        !           493: 
        !           494: 
        !           495: # func_version
        !           496: # Echo version message to standard output and exit.
        !           497: func_version ()
        !           498: {
        !           499:     $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
        !           500:         s/^# //
        !           501:        s/^# *$//
        !           502:         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
        !           503:         p
        !           504:      }' < "$progpath"
        !           505:      exit $?
        !           506: }
        !           507: 
        !           508: # func_usage
        !           509: # Echo short help message to standard output and exit.
        !           510: func_usage ()
        !           511: {
        !           512:     $SED -n '/^# Usage:/,/# -h/ {
        !           513:         s/^# //
        !           514:        s/^# *$//
        !           515:        s/\$progname/'$progname'/
        !           516:        p
        !           517:     }' < "$progpath"
        !           518:     $ECHO
        !           519:     $ECHO "run \`$progname --help | more' for full usage"
        !           520:     exit $?
        !           521: }
        !           522: 
        !           523: # func_help
        !           524: # Echo long help message to standard output and exit.
        !           525: func_help ()
        !           526: {
        !           527:     $SED -n '/^# Usage:/,/# Report bugs to/ {
        !           528:         s/^# //
        !           529:        s/^# *$//
        !           530:        s*\$progname*'$progname'*
        !           531:        s*\$host*'"$host"'*
        !           532:        s*\$SHELL*'"$SHELL"'*
        !           533:        s*\$LTCC*'"$LTCC"'*
        !           534:        s*\$LTCFLAGS*'"$LTCFLAGS"'*
        !           535:        s*\$LD*'"$LD"'*
        !           536:        s/\$with_gnu_ld/'"$with_gnu_ld"'/
        !           537:        s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
        !           538:        s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
        !           539:        p
        !           540:      }' < "$progpath"
        !           541:     exit $?
        !           542: }
        !           543: 
        !           544: # func_missing_arg argname
        !           545: # Echo program name prefixed message to standard error and set global
        !           546: # exit_cmd.
        !           547: func_missing_arg ()
        !           548: {
        !           549:     func_error "missing argument for $1"
        !           550:     exit_cmd=exit
        !           551: }
        !           552: 
        !           553: exit_cmd=:
        !           554: 
        !           555: 
        !           556: 
        !           557: 
        !           558: 
        !           559: # Check that we have a working $ECHO.
        !           560: if test "X$1" = X--no-reexec; then
        !           561:   # Discard the --no-reexec flag, and continue.
        !           562:   shift
        !           563: elif test "X$1" = X--fallback-echo; then
        !           564:   # Avoid inline document here, it may be left over
        !           565:   :
        !           566: elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
        !           567:   # Yippee, $ECHO works!
        !           568:   :
        !           569: else
        !           570:   # Restart under the correct shell, and then maybe $ECHO will work.
        !           571:   exec $SHELL "$progpath" --no-reexec ${1+"$@"}
        !           572: fi
        !           573: 
        !           574: if test "X$1" = X--fallback-echo; then
        !           575:   # used as fallback echo
        !           576:   shift
        !           577:   cat <<EOF
        !           578: $*
        !           579: EOF
        !           580:   exit $EXIT_SUCCESS
        !           581: fi
        !           582: 
        !           583: magic="%%%MAGIC variable%%%"
        !           584: magic_exe="%%%MAGIC EXE variable%%%"
        !           585: 
        !           586: # Global variables.
        !           587: # $mode is unset
        !           588: nonopt=
        !           589: execute_dlfiles=
        !           590: preserve_args=
        !           591: lo2o="s/\\.lo\$/.${objext}/"
        !           592: o2lo="s/\\.${objext}\$/.lo/"
        !           593: extracted_archives=
        !           594: extracted_serial=0
        !           595: 
        !           596: opt_dry_run=false
        !           597: opt_duplicate_deps=false
        !           598: opt_silent=false
        !           599: opt_debug=:
        !           600: 
        !           601: # If this variable is set in any of the actions, the command in it
        !           602: # will be execed at the end.  This prevents here-documents from being
        !           603: # left over by shells.
        !           604: exec_cmd=
        !           605: 
        !           606: # func_fatal_configuration arg...
        !           607: # Echo program name prefixed message to standard error, followed by
        !           608: # a configuration failure hint, and exit.
        !           609: func_fatal_configuration ()
        !           610: {
        !           611:     func_error ${1+"$@"}
        !           612:     func_error "See the $PACKAGE documentation for more information."
        !           613:     func_fatal_error "Fatal configuration error."
        !           614: }
        !           615: 
        !           616: 
        !           617: # func_config
        !           618: # Display the configuration for all the tags in this script.
        !           619: func_config ()
        !           620: {
        !           621:     re_begincf='^# ### BEGIN LIBTOOL'
        !           622:     re_endcf='^# ### END LIBTOOL'
        !           623: 
        !           624:     # Default configuration.
        !           625:     $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
        !           626: 
        !           627:     # Now print the configurations for the tags.
        !           628:     for tagname in $taglist; do
        !           629:       $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
        !           630:     done
        !           631: 
        !           632:     exit $?
        !           633: }
        !           634: 
        !           635: # func_features
        !           636: # Display the features supported by this script.
        !           637: func_features ()
        !           638: {
        !           639:     $ECHO "host: $host"
        !           640:     if test "$build_libtool_libs" = yes; then
        !           641:       $ECHO "enable shared libraries"
        !           642:     else
        !           643:       $ECHO "disable shared libraries"
        !           644:     fi
        !           645:     if test "$build_old_libs" = yes; then
        !           646:       $ECHO "enable static libraries"
        !           647:     else
        !           648:       $ECHO "disable static libraries"
        !           649:     fi
        !           650: 
        !           651:     exit $?
        !           652: }
        !           653: 
        !           654: # func_enable_tag tagname
        !           655: # Verify that TAGNAME is valid, and either flag an error and exit, or
        !           656: # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
        !           657: # variable here.
        !           658: func_enable_tag ()
        !           659: {
        !           660:   # Global variable:
        !           661:   tagname="$1"
        !           662: 
        !           663:   re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
        !           664:   re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
        !           665:   sed_extractcf="/$re_begincf/,/$re_endcf/p"
        !           666: 
        !           667:   # Validate tagname.
        !           668:   case $tagname in
        !           669:     *[!-_A-Za-z0-9,/]*)
        !           670:       func_fatal_error "invalid tag name: $tagname"
        !           671:       ;;
        !           672:   esac
        !           673: 
        !           674:   # Don't test for the "default" C tag, as we know it's
        !           675:   # there but not specially marked.
        !           676:   case $tagname in
        !           677:     CC) ;;
        !           678:     *)
        !           679:       if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
        !           680:        taglist="$taglist $tagname"
        !           681: 
        !           682:        # Evaluate the configuration.  Be careful to quote the path
        !           683:        # and the sed script, to avoid splitting on whitespace, but
        !           684:        # also don't use non-portable quotes within backquotes within
        !           685:        # quotes we have to do it in 2 steps:
        !           686:        extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
        !           687:        eval "$extractedcf"
        !           688:       else
        !           689:        func_error "ignoring unknown tag $tagname"
        !           690:       fi
        !           691:       ;;
        !           692:   esac
        !           693: }
        !           694: 
        !           695: # Parse options once, thoroughly.  This comes as soon as possible in
        !           696: # the script to make things like `libtool --version' happen quickly.
        !           697: {
        !           698: 
        !           699:   # Shorthand for --mode=foo, only valid as the first argument
        !           700:   case $1 in
        !           701:   clean|clea|cle|cl)
        !           702:     shift; set dummy --mode clean ${1+"$@"}; shift
        !           703:     ;;
        !           704:   compile|compil|compi|comp|com|co|c)
        !           705:     shift; set dummy --mode compile ${1+"$@"}; shift
        !           706:     ;;
        !           707:   execute|execut|execu|exec|exe|ex|e)
        !           708:     shift; set dummy --mode execute ${1+"$@"}; shift
        !           709:     ;;
        !           710:   finish|finis|fini|fin|fi|f)
        !           711:     shift; set dummy --mode finish ${1+"$@"}; shift
        !           712:     ;;
        !           713:   install|instal|insta|inst|ins|in|i)
        !           714:     shift; set dummy --mode install ${1+"$@"}; shift
        !           715:     ;;
        !           716:   link|lin|li|l)
        !           717:     shift; set dummy --mode link ${1+"$@"}; shift
        !           718:     ;;
        !           719:   uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
        !           720:     shift; set dummy --mode uninstall ${1+"$@"}; shift
        !           721:     ;;
        !           722:   esac
        !           723: 
        !           724:   # Parse non-mode specific arguments:
        !           725:   while test "$#" -gt 0; do
        !           726:     opt="$1"
        !           727:     shift
        !           728: 
        !           729:     case $opt in
        !           730:       --config)                func_config                                     ;;
        !           731: 
        !           732:       --debug)         preserve_args="$preserve_args $opt"
        !           733:                        func_echo "enabling shell trace mode"
        !           734:                        opt_debug='set -x'
        !           735:                        $opt_debug
        !           736:                        ;;
        !           737: 
        !           738:       -dlopen)         test "$#" -eq 0 && func_missing_arg "$opt" && break
        !           739:                        execute_dlfiles="$execute_dlfiles $1"
        !           740:                        shift
        !           741:                        ;;
        !           742: 
        !           743:       --dry-run | -n)  opt_dry_run=:                                   ;;
        !           744:       --features)       func_features                                  ;;
        !           745:       --finish)                mode="finish"                                   ;;
        !           746: 
        !           747:       --mode)          test "$#" -eq 0 && func_missing_arg "$opt" && break
        !           748:                        case $1 in
        !           749:                          # Valid mode arguments:
        !           750:                          clean)        ;;
        !           751:                          compile)      ;;
        !           752:                          execute)      ;;
        !           753:                          finish)       ;;
        !           754:                          install)      ;;
        !           755:                          link)         ;;
        !           756:                          relink)       ;;
        !           757:                          uninstall)    ;;
        !           758: 
        !           759:                          # Catch anything else as an error
        !           760:                          *) func_error "invalid argument for $opt"
        !           761:                             exit_cmd=exit
        !           762:                             break
        !           763:                             ;;
        !           764:                        esac
        !           765: 
        !           766:                        mode="$1"
        !           767:                        shift
        !           768:                        ;;
        !           769: 
        !           770:       --preserve-dup-deps)
        !           771:                        opt_duplicate_deps=:                            ;;
        !           772: 
        !           773:       --quiet|--silent)        preserve_args="$preserve_args $opt"
        !           774:                        opt_silent=:
        !           775:                        ;;
        !           776: 
        !           777:       --verbose| -v)   preserve_args="$preserve_args $opt"
        !           778:                        opt_silent=false
        !           779:                        ;;
        !           780: 
        !           781:       --tag)           test "$#" -eq 0 && func_missing_arg "$opt" && break
        !           782:                        preserve_args="$preserve_args $opt $1"
        !           783:                        func_enable_tag "$1"    # tagname is set here
        !           784:                        shift
        !           785:                        ;;
        !           786: 
        !           787:       # Separate optargs to long options:
        !           788:       -dlopen=*|--mode=*|--tag=*)
        !           789:                        func_opt_split "$opt"
        !           790:                        set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
        !           791:                        shift
        !           792:                        ;;
        !           793: 
        !           794:       -\?|-h)          func_usage                                      ;;
        !           795:       --help)          opt_help=:                                      ;;
        !           796:       --version)       func_version                                    ;;
        !           797: 
        !           798:       -*)              func_fatal_help "unrecognized option \`$opt'"   ;;
        !           799: 
        !           800:       *)               nonopt="$opt"
        !           801:                        break
        !           802:                        ;;
        !           803:     esac
        !           804:   done
        !           805: 
        !           806: 
        !           807:   case $host in
        !           808:     *cygwin* | *mingw* | *pw32* | *cegcc*)
        !           809:       # don't eliminate duplications in $postdeps and $predeps
        !           810:       opt_duplicate_compiler_generated_deps=:
        !           811:       ;;
        !           812:     *)
        !           813:       opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
        !           814:       ;;
        !           815:   esac
        !           816: 
        !           817:   # Having warned about all mis-specified options, bail out if
        !           818:   # anything was wrong.
        !           819:   $exit_cmd $EXIT_FAILURE
        !           820: }
        !           821: 
        !           822: # func_check_version_match
        !           823: # Ensure that we are using m4 macros, and libtool script from the same
        !           824: # release of libtool.
        !           825: func_check_version_match ()
        !           826: {
        !           827:   if test "$package_revision" != "$macro_revision"; then
        !           828:     if test "$VERSION" != "$macro_version"; then
        !           829:       if test -z "$macro_version"; then
        !           830:         cat >&2 <<_LT_EOF
        !           831: $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
        !           832: $progname: definition of this LT_INIT comes from an older release.
        !           833: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
        !           834: $progname: and run autoconf again.
        !           835: _LT_EOF
        !           836:       else
        !           837:         cat >&2 <<_LT_EOF
        !           838: $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
        !           839: $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
        !           840: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
        !           841: $progname: and run autoconf again.
        !           842: _LT_EOF
        !           843:       fi
        !           844:     else
        !           845:       cat >&2 <<_LT_EOF
        !           846: $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
        !           847: $progname: but the definition of this LT_INIT comes from revision $macro_revision.
        !           848: $progname: You should recreate aclocal.m4 with macros from revision $package_revision
        !           849: $progname: of $PACKAGE $VERSION and run autoconf again.
        !           850: _LT_EOF
        !           851:     fi
        !           852: 
        !           853:     exit $EXIT_MISMATCH
        !           854:   fi
        !           855: }
        !           856: 
        !           857: 
        !           858: ## ----------- ##
        !           859: ##    Main.    ##
        !           860: ## ----------- ##
        !           861: 
        !           862: $opt_help || {
        !           863:   # Sanity checks first:
        !           864:   func_check_version_match
        !           865: 
        !           866:   if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
        !           867:     func_fatal_configuration "not configured to build any kind of library"
        !           868:   fi
        !           869: 
        !           870:   test -z "$mode" && func_fatal_error "error: you must specify a MODE."
        !           871: 
        !           872: 
        !           873:   # Darwin sucks
        !           874:   eval std_shrext=\"$shrext_cmds\"
        !           875: 
        !           876: 
        !           877:   # Only execute mode is allowed to have -dlopen flags.
        !           878:   if test -n "$execute_dlfiles" && test "$mode" != execute; then
        !           879:     func_error "unrecognized option \`-dlopen'"
        !           880:     $ECHO "$help" 1>&2
        !           881:     exit $EXIT_FAILURE
        !           882:   fi
        !           883: 
        !           884:   # Change the help message to a mode-specific one.
        !           885:   generic_help="$help"
        !           886:   help="Try \`$progname --help --mode=$mode' for more information."
        !           887: }
        !           888: 
        !           889: 
        !           890: # func_lalib_p file
        !           891: # True iff FILE is a libtool `.la' library or `.lo' object file.
        !           892: # This function is only a basic sanity check; it will hardly flush out
        !           893: # determined imposters.
        !           894: func_lalib_p ()
        !           895: {
        !           896:     test -f "$1" &&
        !           897:       $SED -e 4q "$1" 2>/dev/null \
        !           898:         | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
        !           899: }
        !           900: 
        !           901: # func_lalib_unsafe_p file
        !           902: # True iff FILE is a libtool `.la' library or `.lo' object file.
        !           903: # This function implements the same check as func_lalib_p without
        !           904: # resorting to external programs.  To this end, it redirects stdin and
        !           905: # closes it afterwards, without saving the original file descriptor.
        !           906: # As a safety measure, use it only where a negative result would be
        !           907: # fatal anyway.  Works if `file' does not exist.
        !           908: func_lalib_unsafe_p ()
        !           909: {
        !           910:     lalib_p=no
        !           911:     if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
        !           912:        for lalib_p_l in 1 2 3 4
        !           913:        do
        !           914:            read lalib_p_line
        !           915:            case "$lalib_p_line" in
        !           916:                \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
        !           917:            esac
        !           918:        done
        !           919:        exec 0<&5 5<&-
        !           920:     fi
        !           921:     test "$lalib_p" = yes
        !           922: }
        !           923: 
        !           924: # func_ltwrapper_script_p file
        !           925: # True iff FILE is a libtool wrapper script
        !           926: # This function is only a basic sanity check; it will hardly flush out
        !           927: # determined imposters.
        !           928: func_ltwrapper_script_p ()
        !           929: {
        !           930:     func_lalib_p "$1"
        !           931: }
        !           932: 
        !           933: # func_ltwrapper_executable_p file
        !           934: # True iff FILE is a libtool wrapper executable
        !           935: # This function is only a basic sanity check; it will hardly flush out
        !           936: # determined imposters.
        !           937: func_ltwrapper_executable_p ()
        !           938: {
        !           939:     func_ltwrapper_exec_suffix=
        !           940:     case $1 in
        !           941:     *.exe) ;;
        !           942:     *) func_ltwrapper_exec_suffix=.exe ;;
        !           943:     esac
        !           944:     $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
        !           945: }
        !           946: 
        !           947: # func_ltwrapper_scriptname file
        !           948: # Assumes file is an ltwrapper_executable
        !           949: # uses $file to determine the appropriate filename for a
        !           950: # temporary ltwrapper_script.
        !           951: func_ltwrapper_scriptname ()
        !           952: {
        !           953:     func_ltwrapper_scriptname_result=""
        !           954:     if func_ltwrapper_executable_p "$1"; then
        !           955:        func_dirname_and_basename "$1" "" "."
        !           956:        func_stripname '' '.exe' "$func_basename_result"
        !           957:        func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
        !           958:     fi
        !           959: }
        !           960: 
        !           961: # func_ltwrapper_p file
        !           962: # True iff FILE is a libtool wrapper script or wrapper executable
        !           963: # This function is only a basic sanity check; it will hardly flush out
        !           964: # determined imposters.
        !           965: func_ltwrapper_p ()
        !           966: {
        !           967:     func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
        !           968: }
        !           969: 
        !           970: 
        !           971: # func_execute_cmds commands fail_cmd
        !           972: # Execute tilde-delimited COMMANDS.
        !           973: # If FAIL_CMD is given, eval that upon failure.
        !           974: # FAIL_CMD may read-access the current command in variable CMD!
        !           975: func_execute_cmds ()
        !           976: {
        !           977:     $opt_debug
        !           978:     save_ifs=$IFS; IFS='~'
        !           979:     for cmd in $1; do
        !           980:       IFS=$save_ifs
        !           981:       eval cmd=\"$cmd\"
        !           982:       func_show_eval "$cmd" "${2-:}"
        !           983:     done
        !           984:     IFS=$save_ifs
        !           985: }
        !           986: 
        !           987: 
        !           988: # func_source file
        !           989: # Source FILE, adding directory component if necessary.
        !           990: # Note that it is not necessary on cygwin/mingw to append a dot to
        !           991: # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
        !           992: # behavior happens only for exec(3), not for open(2)!  Also, sourcing
        !           993: # `FILE.' does not work on cygwin managed mounts.
        !           994: func_source ()
        !           995: {
        !           996:     $opt_debug
        !           997:     case $1 in
        !           998:     */* | *\\*)        . "$1" ;;
        !           999:     *)         . "./$1" ;;
        !          1000:     esac
        !          1001: }
        !          1002: 
        !          1003: 
        !          1004: # func_infer_tag arg
        !          1005: # Infer tagged configuration to use if any are available and
        !          1006: # if one wasn't chosen via the "--tag" command line option.
        !          1007: # Only attempt this if the compiler in the base compile
        !          1008: # command doesn't match the default compiler.
        !          1009: # arg is usually of the form 'gcc ...'
        !          1010: func_infer_tag ()
        !          1011: {
        !          1012:     $opt_debug
        !          1013:     if test -n "$available_tags" && test -z "$tagname"; then
        !          1014:       CC_quoted=
        !          1015:       for arg in $CC; do
        !          1016:         func_quote_for_eval "$arg"
        !          1017:        CC_quoted="$CC_quoted $func_quote_for_eval_result"
        !          1018:       done
        !          1019:       case $@ in
        !          1020:       # Blanks in the command may have been stripped by the calling shell,
        !          1021:       # but not from the CC environment variable when configure was run.
        !          1022:       " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
        !          1023:       # Blanks at the start of $base_compile will cause this to fail
        !          1024:       # if we don't check for them as well.
        !          1025:       *)
        !          1026:        for z in $available_tags; do
        !          1027:          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
        !          1028:            # Evaluate the configuration.
        !          1029:            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
        !          1030:            CC_quoted=
        !          1031:            for arg in $CC; do
        !          1032:              # Double-quote args containing other shell metacharacters.
        !          1033:              func_quote_for_eval "$arg"
        !          1034:              CC_quoted="$CC_quoted $func_quote_for_eval_result"
        !          1035:            done
        !          1036:            case "$@ " in
        !          1037:              " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
        !          1038:              # The compiler in the base compile command matches
        !          1039:              # the one in the tagged configuration.
        !          1040:              # Assume this is the tagged configuration we want.
        !          1041:              tagname=$z
        !          1042:              break
        !          1043:              ;;
        !          1044:            esac
        !          1045:          fi
        !          1046:        done
        !          1047:        # If $tagname still isn't set, then no tagged configuration
        !          1048:        # was found and let the user know that the "--tag" command
        !          1049:        # line option must be used.
        !          1050:        if test -z "$tagname"; then
        !          1051:          func_echo "unable to infer tagged configuration"
        !          1052:          func_fatal_error "specify a tag with \`--tag'"
        !          1053: #      else
        !          1054: #        func_verbose "using $tagname tagged configuration"
        !          1055:        fi
        !          1056:        ;;
        !          1057:       esac
        !          1058:     fi
        !          1059: }
        !          1060: 
        !          1061: 
        !          1062: 
        !          1063: # func_write_libtool_object output_name pic_name nonpic_name
        !          1064: # Create a libtool object file (analogous to a ".la" file),
        !          1065: # but don't create it if we're doing a dry run.
        !          1066: func_write_libtool_object ()
        !          1067: {
        !          1068:     write_libobj=${1}
        !          1069:     if test "$build_libtool_libs" = yes; then
        !          1070:       write_lobj=\'${2}\'
        !          1071:     else
        !          1072:       write_lobj=none
        !          1073:     fi
        !          1074: 
        !          1075:     if test "$build_old_libs" = yes; then
        !          1076:       write_oldobj=\'${3}\'
        !          1077:     else
        !          1078:       write_oldobj=none
        !          1079:     fi
        !          1080: 
        !          1081:     $opt_dry_run || {
        !          1082:       cat >${write_libobj}T <<EOF
        !          1083: # $write_libobj - a libtool object file
        !          1084: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
        !          1085: #
        !          1086: # Please DO NOT delete this file!
        !          1087: # It is necessary for linking the library.
        !          1088: 
        !          1089: # Name of the PIC object.
        !          1090: pic_object=$write_lobj
        !          1091: 
        !          1092: # Name of the non-PIC object
        !          1093: non_pic_object=$write_oldobj
        !          1094: 
        !          1095: EOF
        !          1096:       $MV "${write_libobj}T" "${write_libobj}"
        !          1097:     }
        !          1098: }
        !          1099: 
        !          1100: # func_mode_compile arg...
        !          1101: func_mode_compile ()
        !          1102: {
        !          1103:     $opt_debug
        !          1104:     # Get the compilation command and the source file.
        !          1105:     base_compile=
        !          1106:     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
        !          1107:     suppress_opt=yes
        !          1108:     suppress_output=
        !          1109:     arg_mode=normal
        !          1110:     libobj=
        !          1111:     later=
        !          1112:     pie_flag=
        !          1113: 
        !          1114:     for arg
        !          1115:     do
        !          1116:       case $arg_mode in
        !          1117:       arg  )
        !          1118:        # do not "continue".  Instead, add this to base_compile
        !          1119:        lastarg="$arg"
        !          1120:        arg_mode=normal
        !          1121:        ;;
        !          1122: 
        !          1123:       target )
        !          1124:        libobj="$arg"
        !          1125:        arg_mode=normal
        !          1126:        continue
        !          1127:        ;;
        !          1128: 
        !          1129:       normal )
        !          1130:        # Accept any command-line options.
        !          1131:        case $arg in
        !          1132:        -o)
        !          1133:          test -n "$libobj" && \
        !          1134:            func_fatal_error "you cannot specify \`-o' more than once"
        !          1135:          arg_mode=target
        !          1136:          continue
        !          1137:          ;;
        !          1138: 
        !          1139:        -pie | -fpie | -fPIE)
        !          1140:           pie_flag="$pie_flag $arg"
        !          1141:          continue
        !          1142:          ;;
        !          1143: 
        !          1144:        -shared | -static | -prefer-pic | -prefer-non-pic)
        !          1145:          later="$later $arg"
        !          1146:          continue
        !          1147:          ;;
        !          1148: 
        !          1149:        -no-suppress)
        !          1150:          suppress_opt=no
        !          1151:          continue
        !          1152:          ;;
        !          1153: 
        !          1154:        -Xcompiler)
        !          1155:          arg_mode=arg  #  the next one goes into the "base_compile" arg list
        !          1156:          continue      #  The current "srcfile" will either be retained or
        !          1157:          ;;            #  replaced later.  I would guess that would be a bug.
        !          1158: 
        !          1159:        -Wc,*)
        !          1160:          func_stripname '-Wc,' '' "$arg"
        !          1161:          args=$func_stripname_result
        !          1162:          lastarg=
        !          1163:          save_ifs="$IFS"; IFS=','
        !          1164:          for arg in $args; do
        !          1165:            IFS="$save_ifs"
        !          1166:            func_quote_for_eval "$arg"
        !          1167:            lastarg="$lastarg $func_quote_for_eval_result"
        !          1168:          done
        !          1169:          IFS="$save_ifs"
        !          1170:          func_stripname ' ' '' "$lastarg"
        !          1171:          lastarg=$func_stripname_result
        !          1172: 
        !          1173:          # Add the arguments to base_compile.
        !          1174:          base_compile="$base_compile $lastarg"
        !          1175:          continue
        !          1176:          ;;
        !          1177: 
        !          1178:        *)
        !          1179:          # Accept the current argument as the source file.
        !          1180:          # The previous "srcfile" becomes the current argument.
        !          1181:          #
        !          1182:          lastarg="$srcfile"
        !          1183:          srcfile="$arg"
        !          1184:          ;;
        !          1185:        esac  #  case $arg
        !          1186:        ;;
        !          1187:       esac    #  case $arg_mode
        !          1188: 
        !          1189:       # Aesthetically quote the previous argument.
        !          1190:       func_quote_for_eval "$lastarg"
        !          1191:       base_compile="$base_compile $func_quote_for_eval_result"
        !          1192:     done # for arg
        !          1193: 
        !          1194:     case $arg_mode in
        !          1195:     arg)
        !          1196:       func_fatal_error "you must specify an argument for -Xcompile"
        !          1197:       ;;
        !          1198:     target)
        !          1199:       func_fatal_error "you must specify a target with \`-o'"
        !          1200:       ;;
        !          1201:     *)
        !          1202:       # Get the name of the library object.
        !          1203:       test -z "$libobj" && {
        !          1204:        func_basename "$srcfile"
        !          1205:        libobj="$func_basename_result"
        !          1206:       }
        !          1207:       ;;
        !          1208:     esac
        !          1209: 
        !          1210:     # Recognize several different file suffixes.
        !          1211:     # If the user specifies -o file.o, it is replaced with file.lo
        !          1212:     case $libobj in
        !          1213:     *.[cCFSifmso] | \
        !          1214:     *.ada | *.adb | *.ads | *.asm | \
        !          1215:     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
        !          1216:     *.[fF][09]? | *.for | *.java | *.obj | *.sx)
        !          1217:       func_xform "$libobj"
        !          1218:       libobj=$func_xform_result
        !          1219:       ;;
        !          1220:     esac
        !          1221: 
        !          1222:     case $libobj in
        !          1223:     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
        !          1224:     *)
        !          1225:       func_fatal_error "cannot determine name of library object from \`$libobj'"
        !          1226:       ;;
        !          1227:     esac
        !          1228: 
        !          1229:     func_infer_tag $base_compile
        !          1230: 
        !          1231:     for arg in $later; do
        !          1232:       case $arg in
        !          1233:       -shared)
        !          1234:        test "$build_libtool_libs" != yes && \
        !          1235:          func_fatal_configuration "can not build a shared library"
        !          1236:        build_old_libs=no
        !          1237:        continue
        !          1238:        ;;
        !          1239: 
        !          1240:       -static)
        !          1241:        build_libtool_libs=no
        !          1242:        build_old_libs=yes
        !          1243:        continue
        !          1244:        ;;
        !          1245: 
        !          1246:       -prefer-pic)
        !          1247:        pic_mode=yes
        !          1248:        continue
        !          1249:        ;;
        !          1250: 
        !          1251:       -prefer-non-pic)
        !          1252:        pic_mode=no
        !          1253:        continue
        !          1254:        ;;
        !          1255:       esac
        !          1256:     done
        !          1257: 
        !          1258:     func_quote_for_eval "$libobj"
        !          1259:     test "X$libobj" != "X$func_quote_for_eval_result" \
        !          1260:       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'   &()|`$[]' \
        !          1261:       && func_warning "libobj name \`$libobj' may not contain shell special characters."
        !          1262:     func_dirname_and_basename "$obj" "/" ""
        !          1263:     objname="$func_basename_result"
        !          1264:     xdir="$func_dirname_result"
        !          1265:     lobj=${xdir}$objdir/$objname
        !          1266: 
        !          1267:     test -z "$base_compile" && \
        !          1268:       func_fatal_help "you must specify a compilation command"
        !          1269: 
        !          1270:     # Delete any leftover library objects.
        !          1271:     if test "$build_old_libs" = yes; then
        !          1272:       removelist="$obj $lobj $libobj ${libobj}T"
        !          1273:     else
        !          1274:       removelist="$lobj $libobj ${libobj}T"
        !          1275:     fi
        !          1276: 
        !          1277:     # On Cygwin there's no "real" PIC flag so we must build both object types
        !          1278:     case $host_os in
        !          1279:     cygwin* | mingw* | pw32* | os2* | cegcc*)
        !          1280:       pic_mode=default
        !          1281:       ;;
        !          1282:     esac
        !          1283:     if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
        !          1284:       # non-PIC code in shared libraries is not supported
        !          1285:       pic_mode=default
        !          1286:     fi
        !          1287: 
        !          1288:     # Calculate the filename of the output object if compiler does
        !          1289:     # not support -o with -c
        !          1290:     if test "$compiler_c_o" = no; then
        !          1291:       output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
        !          1292:       lockfile="$output_obj.lock"
        !          1293:     else
        !          1294:       output_obj=
        !          1295:       need_locks=no
        !          1296:       lockfile=
        !          1297:     fi
        !          1298: 
        !          1299:     # Lock this critical section if it is needed
        !          1300:     # We use this script file to make the link, it avoids creating a new file
        !          1301:     if test "$need_locks" = yes; then
        !          1302:       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
        !          1303:        func_echo "Waiting for $lockfile to be removed"
        !          1304:        sleep 2
        !          1305:       done
        !          1306:     elif test "$need_locks" = warn; then
        !          1307:       if test -f "$lockfile"; then
        !          1308:        $ECHO "\
        !          1309: *** ERROR, $lockfile exists and contains:
        !          1310: `cat $lockfile 2>/dev/null`
        !          1311: 
        !          1312: This indicates that another process is trying to use the same
        !          1313: temporary object file, and libtool could not work around it because
        !          1314: your compiler does not support \`-c' and \`-o' together.  If you
        !          1315: repeat this compilation, it may succeed, by chance, but you had better
        !          1316: avoid parallel builds (make -j) in this platform, or get a better
        !          1317: compiler."
        !          1318: 
        !          1319:        $opt_dry_run || $RM $removelist
        !          1320:        exit $EXIT_FAILURE
        !          1321:       fi
        !          1322:       removelist="$removelist $output_obj"
        !          1323:       $ECHO "$srcfile" > "$lockfile"
        !          1324:     fi
        !          1325: 
        !          1326:     $opt_dry_run || $RM $removelist
        !          1327:     removelist="$removelist $lockfile"
        !          1328:     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
        !          1329: 
        !          1330:     if test -n "$fix_srcfile_path"; then
        !          1331:       eval srcfile=\"$fix_srcfile_path\"
        !          1332:     fi
        !          1333:     func_quote_for_eval "$srcfile"
        !          1334:     qsrcfile=$func_quote_for_eval_result
        !          1335: 
        !          1336:     # Only build a PIC object if we are building libtool libraries.
        !          1337:     if test "$build_libtool_libs" = yes; then
        !          1338:       # Without this assignment, base_compile gets emptied.
        !          1339:       fbsd_hideous_sh_bug=$base_compile
        !          1340: 
        !          1341:       if test "$pic_mode" != no; then
        !          1342:        command="$base_compile $qsrcfile $pic_flag"
        !          1343:       else
        !          1344:        # Don't build PIC code
        !          1345:        command="$base_compile $qsrcfile"
        !          1346:       fi
        !          1347: 
        !          1348:       func_mkdir_p "$xdir$objdir"
        !          1349: 
        !          1350:       if test -z "$output_obj"; then
        !          1351:        # Place PIC objects in $objdir
        !          1352:        command="$command -o $lobj"
        !          1353:       fi
        !          1354: 
        !          1355:       func_show_eval_locale "$command" \
        !          1356:           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
        !          1357: 
        !          1358:       if test "$need_locks" = warn &&
        !          1359:         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        !          1360:        $ECHO "\
        !          1361: *** ERROR, $lockfile contains:
        !          1362: `cat $lockfile 2>/dev/null`
        !          1363: 
        !          1364: but it should contain:
        !          1365: $srcfile
        !          1366: 
        !          1367: This indicates that another process is trying to use the same
        !          1368: temporary object file, and libtool could not work around it because
        !          1369: your compiler does not support \`-c' and \`-o' together.  If you
        !          1370: repeat this compilation, it may succeed, by chance, but you had better
        !          1371: avoid parallel builds (make -j) in this platform, or get a better
        !          1372: compiler."
        !          1373: 
        !          1374:        $opt_dry_run || $RM $removelist
        !          1375:        exit $EXIT_FAILURE
        !          1376:       fi
        !          1377: 
        !          1378:       # Just move the object if needed, then go on to compile the next one
        !          1379:       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
        !          1380:        func_show_eval '$MV "$output_obj" "$lobj"' \
        !          1381:          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
        !          1382:       fi
        !          1383: 
        !          1384:       # Allow error messages only from the first compilation.
        !          1385:       if test "$suppress_opt" = yes; then
        !          1386:        suppress_output=' >/dev/null 2>&1'
        !          1387:       fi
        !          1388:     fi
        !          1389: 
        !          1390:     # Only build a position-dependent object if we build old libraries.
        !          1391:     if test "$build_old_libs" = yes; then
        !          1392:       if test "$pic_mode" != yes; then
        !          1393:        # Don't build PIC code
        !          1394:        command="$base_compile $qsrcfile$pie_flag"
        !          1395:       else
        !          1396:        command="$base_compile $qsrcfile $pic_flag"
        !          1397:       fi
        !          1398:       if test "$compiler_c_o" = yes; then
        !          1399:        command="$command -o $obj"
        !          1400:       fi
        !          1401: 
        !          1402:       # Suppress compiler output if we already did a PIC compilation.
        !          1403:       command="$command$suppress_output"
        !          1404:       func_show_eval_locale "$command" \
        !          1405:         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
        !          1406: 
        !          1407:       if test "$need_locks" = warn &&
        !          1408:         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        !          1409:        $ECHO "\
        !          1410: *** ERROR, $lockfile contains:
        !          1411: `cat $lockfile 2>/dev/null`
        !          1412: 
        !          1413: but it should contain:
        !          1414: $srcfile
        !          1415: 
        !          1416: This indicates that another process is trying to use the same
        !          1417: temporary object file, and libtool could not work around it because
        !          1418: your compiler does not support \`-c' and \`-o' together.  If you
        !          1419: repeat this compilation, it may succeed, by chance, but you had better
        !          1420: avoid parallel builds (make -j) in this platform, or get a better
        !          1421: compiler."
        !          1422: 
        !          1423:        $opt_dry_run || $RM $removelist
        !          1424:        exit $EXIT_FAILURE
        !          1425:       fi
        !          1426: 
        !          1427:       # Just move the object if needed
        !          1428:       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
        !          1429:        func_show_eval '$MV "$output_obj" "$obj"' \
        !          1430:          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
        !          1431:       fi
        !          1432:     fi
        !          1433: 
        !          1434:     $opt_dry_run || {
        !          1435:       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
        !          1436: 
        !          1437:       # Unlock the critical section if it was locked
        !          1438:       if test "$need_locks" != no; then
        !          1439:        removelist=$lockfile
        !          1440:         $RM "$lockfile"
        !          1441:       fi
        !          1442:     }
        !          1443: 
        !          1444:     exit $EXIT_SUCCESS
        !          1445: }
        !          1446: 
        !          1447: $opt_help || {
        !          1448: test "$mode" = compile && func_mode_compile ${1+"$@"}
        !          1449: }
        !          1450: 
        !          1451: func_mode_help ()
        !          1452: {
        !          1453:     # We need to display help for each of the modes.
        !          1454:     case $mode in
        !          1455:       "")
        !          1456:         # Generic help is extracted from the usage comments
        !          1457:         # at the start of this file.
        !          1458:         func_help
        !          1459:         ;;
        !          1460: 
        !          1461:       clean)
        !          1462:         $ECHO \
        !          1463: "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
        !          1464: 
        !          1465: Remove files from the build directory.
        !          1466: 
        !          1467: RM is the name of the program to use to delete files associated with each FILE
        !          1468: (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
        !          1469: to RM.
        !          1470: 
        !          1471: If FILE is a libtool library, object or program, all the files associated
        !          1472: with it are deleted. Otherwise, only FILE itself is deleted using RM."
        !          1473:         ;;
        !          1474: 
        !          1475:       compile)
        !          1476:       $ECHO \
        !          1477: "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
        !          1478: 
        !          1479: Compile a source file into a libtool library object.
        !          1480: 
        !          1481: This mode accepts the following additional options:
        !          1482: 
        !          1483:   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
        !          1484:   -no-suppress      do not suppress compiler output for multiple passes
        !          1485:   -prefer-pic       try to building PIC objects only
        !          1486:   -prefer-non-pic   try to building non-PIC objects only
        !          1487:   -shared           do not build a \`.o' file suitable for static linking
        !          1488:   -static           only build a \`.o' file suitable for static linking
        !          1489: 
        !          1490: COMPILE-COMMAND is a command to be used in creating a \`standard' object file
        !          1491: from the given SOURCEFILE.
        !          1492: 
        !          1493: The output file name is determined by removing the directory component from
        !          1494: SOURCEFILE, then substituting the C source code suffix \`.c' with the
        !          1495: library object suffix, \`.lo'."
        !          1496:         ;;
        !          1497: 
        !          1498:       execute)
        !          1499:         $ECHO \
        !          1500: "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
        !          1501: 
        !          1502: Automatically set library path, then run a program.
        !          1503: 
        !          1504: This mode accepts the following additional options:
        !          1505: 
        !          1506:   -dlopen FILE      add the directory containing FILE to the library path
        !          1507: 
        !          1508: This mode sets the library path environment variable according to \`-dlopen'
        !          1509: flags.
        !          1510: 
        !          1511: If any of the ARGS are libtool executable wrappers, then they are translated
        !          1512: into their corresponding uninstalled binary, and any of their required library
        !          1513: directories are added to the library path.
        !          1514: 
        !          1515: Then, COMMAND is executed, with ARGS as arguments."
        !          1516:         ;;
        !          1517: 
        !          1518:       finish)
        !          1519:         $ECHO \
        !          1520: "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
        !          1521: 
        !          1522: Complete the installation of libtool libraries.
        !          1523: 
        !          1524: Each LIBDIR is a directory that contains libtool libraries.
        !          1525: 
        !          1526: The commands that this mode executes may require superuser privileges.  Use
        !          1527: the \`--dry-run' option if you just want to see what would be executed."
        !          1528:         ;;
        !          1529: 
        !          1530:       install)
        !          1531:         $ECHO \
        !          1532: "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
        !          1533: 
        !          1534: Install executables or libraries.
        !          1535: 
        !          1536: INSTALL-COMMAND is the installation command.  The first component should be
        !          1537: either the \`install' or \`cp' program.
        !          1538: 
        !          1539: The following components of INSTALL-COMMAND are treated specially:
        !          1540: 
        !          1541:   -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
        !          1542: 
        !          1543: The rest of the components are interpreted as arguments to that command (only
        !          1544: BSD-compatible install options are recognized)."
        !          1545:         ;;
        !          1546: 
        !          1547:       link)
        !          1548:         $ECHO \
        !          1549: "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
        !          1550: 
        !          1551: Link object files or libraries together to form another library, or to
        !          1552: create an executable program.
        !          1553: 
        !          1554: LINK-COMMAND is a command using the C compiler that you would use to create
        !          1555: a program from several object files.
        !          1556: 
        !          1557: The following components of LINK-COMMAND are treated specially:
        !          1558: 
        !          1559:   -all-static       do not do any dynamic linking at all
        !          1560:   -avoid-version    do not add a version suffix if possible
        !          1561:   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
        !          1562:   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
        !          1563:   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
        !          1564:   -export-symbols SYMFILE
        !          1565:                     try to export only the symbols listed in SYMFILE
        !          1566:   -export-symbols-regex REGEX
        !          1567:                     try to export only the symbols matching REGEX
        !          1568:   -LLIBDIR          search LIBDIR for required installed libraries
        !          1569:   -lNAME            OUTPUT-FILE requires the installed library libNAME
        !          1570:   -module           build a library that can dlopened
        !          1571:   -no-fast-install  disable the fast-install mode
        !          1572:   -no-install       link a not-installable executable
        !          1573:   -no-undefined     declare that a library does not refer to external symbols
        !          1574:   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
        !          1575:   -objectlist FILE  Use a list of object files found in FILE to specify objects
        !          1576:   -precious-files-regex REGEX
        !          1577:                     don't remove output files matching REGEX
        !          1578:   -release RELEASE  specify package release information
        !          1579:   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
        !          1580:   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
        !          1581:   -shared           only do dynamic linking of libtool libraries
        !          1582:   -shrext SUFFIX    override the standard shared library file extension
        !          1583:   -static           do not do any dynamic linking of uninstalled libtool libraries
        !          1584:   -static-libtool-libs
        !          1585:                     do not do any dynamic linking of libtool libraries
        !          1586:   -version-info CURRENT[:REVISION[:AGE]]
        !          1587:                     specify library version info [each variable defaults to 0]
        !          1588:   -weak LIBNAME     declare that the target provides the LIBNAME interface
        !          1589: 
        !          1590: All other options (arguments beginning with \`-') are ignored.
        !          1591: 
        !          1592: Every other argument is treated as a filename.  Files ending in \`.la' are
        !          1593: treated as uninstalled libtool libraries, other files are standard or library
        !          1594: object files.
        !          1595: 
        !          1596: If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
        !          1597: only library objects (\`.lo' files) may be specified, and \`-rpath' is
        !          1598: required, except when creating a convenience library.
        !          1599: 
        !          1600: If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
        !          1601: using \`ar' and \`ranlib', or on Windows using \`lib'.
        !          1602: 
        !          1603: If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
        !          1604: is created, otherwise an executable program is created."
        !          1605:         ;;
        !          1606: 
        !          1607:       uninstall)
        !          1608:         $ECHO \
        !          1609: "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
        !          1610: 
        !          1611: Remove libraries from an installation directory.
        !          1612: 
        !          1613: RM is the name of the program to use to delete files associated with each FILE
        !          1614: (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
        !          1615: to RM.
        !          1616: 
        !          1617: If FILE is a libtool library, all the files associated with it are deleted.
        !          1618: Otherwise, only FILE itself is deleted using RM."
        !          1619:         ;;
        !          1620: 
        !          1621:       *)
        !          1622:         func_fatal_help "invalid operation mode \`$mode'"
        !          1623:         ;;
        !          1624:     esac
        !          1625: 
        !          1626:     $ECHO
        !          1627:     $ECHO "Try \`$progname --help' for more information about other modes."
        !          1628: 
        !          1629:     exit $?
        !          1630: }
        !          1631: 
        !          1632:   # Now that we've collected a possible --mode arg, show help if necessary
        !          1633:   $opt_help && func_mode_help
        !          1634: 
        !          1635: 
        !          1636: # func_mode_execute arg...
        !          1637: func_mode_execute ()
        !          1638: {
        !          1639:     $opt_debug
        !          1640:     # The first argument is the command name.
        !          1641:     cmd="$nonopt"
        !          1642:     test -z "$cmd" && \
        !          1643:       func_fatal_help "you must specify a COMMAND"
        !          1644: 
        !          1645:     # Handle -dlopen flags immediately.
        !          1646:     for file in $execute_dlfiles; do
        !          1647:       test -f "$file" \
        !          1648:        || func_fatal_help "\`$file' is not a file"
        !          1649: 
        !          1650:       dir=
        !          1651:       case $file in
        !          1652:       *.la)
        !          1653:        # Check to see that this really is a libtool archive.
        !          1654:        func_lalib_unsafe_p "$file" \
        !          1655:          || func_fatal_help "\`$lib' is not a valid libtool archive"
        !          1656: 
        !          1657:        # Read the libtool library.
        !          1658:        dlname=
        !          1659:        library_names=
        !          1660:        func_source "$file"
        !          1661: 
        !          1662:        # Skip this library if it cannot be dlopened.
        !          1663:        if test -z "$dlname"; then
        !          1664:          # Warn if it was a shared library.
        !          1665:          test -n "$library_names" && \
        !          1666:            func_warning "\`$file' was not linked with \`-export-dynamic'"
        !          1667:          continue
        !          1668:        fi
        !          1669: 
        !          1670:        func_dirname "$file" "" "."
        !          1671:        dir="$func_dirname_result"
        !          1672: 
        !          1673:        if test -f "$dir/$objdir/$dlname"; then
        !          1674:          dir="$dir/$objdir"
        !          1675:        else
        !          1676:          if test ! -f "$dir/$dlname"; then
        !          1677:            func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
        !          1678:          fi
        !          1679:        fi
        !          1680:        ;;
        !          1681: 
        !          1682:       *.lo)
        !          1683:        # Just add the directory containing the .lo file.
        !          1684:        func_dirname "$file" "" "."
        !          1685:        dir="$func_dirname_result"
        !          1686:        ;;
        !          1687: 
        !          1688:       *)
        !          1689:        func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
        !          1690:        continue
        !          1691:        ;;
        !          1692:       esac
        !          1693: 
        !          1694:       # Get the absolute pathname.
        !          1695:       absdir=`cd "$dir" && pwd`
        !          1696:       test -n "$absdir" && dir="$absdir"
        !          1697: 
        !          1698:       # Now add the directory to shlibpath_var.
        !          1699:       if eval "test -z \"\$$shlibpath_var\""; then
        !          1700:        eval "$shlibpath_var=\"\$dir\""
        !          1701:       else
        !          1702:        eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
        !          1703:       fi
        !          1704:     done
        !          1705: 
        !          1706:     # This variable tells wrapper scripts just to set shlibpath_var
        !          1707:     # rather than running their programs.
        !          1708:     libtool_execute_magic="$magic"
        !          1709: 
        !          1710:     # Check if any of the arguments is a wrapper script.
        !          1711:     args=
        !          1712:     for file
        !          1713:     do
        !          1714:       case $file in
        !          1715:       -*) ;;
        !          1716:       *)
        !          1717:        # Do a test to see if this is really a libtool program.
        !          1718:        if func_ltwrapper_script_p "$file"; then
        !          1719:          func_source "$file"
        !          1720:          # Transform arg to wrapped name.
        !          1721:          file="$progdir/$program"
        !          1722:        elif func_ltwrapper_executable_p "$file"; then
        !          1723:          func_ltwrapper_scriptname "$file"
        !          1724:          func_source "$func_ltwrapper_scriptname_result"
        !          1725:          # Transform arg to wrapped name.
        !          1726:          file="$progdir/$program"
        !          1727:        fi
        !          1728:        ;;
        !          1729:       esac
        !          1730:       # Quote arguments (to preserve shell metacharacters).
        !          1731:       func_quote_for_eval "$file"
        !          1732:       args="$args $func_quote_for_eval_result"
        !          1733:     done
        !          1734: 
        !          1735:     if test "X$opt_dry_run" = Xfalse; then
        !          1736:       if test -n "$shlibpath_var"; then
        !          1737:        # Export the shlibpath_var.
        !          1738:        eval "export $shlibpath_var"
        !          1739:       fi
        !          1740: 
        !          1741:       # Restore saved environment variables
        !          1742:       for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
        !          1743:       do
        !          1744:        eval "if test \"\${save_$lt_var+set}\" = set; then
        !          1745:                 $lt_var=\$save_$lt_var; export $lt_var
        !          1746:              else
        !          1747:                $lt_unset $lt_var
        !          1748:              fi"
        !          1749:       done
        !          1750: 
        !          1751:       # Now prepare to actually exec the command.
        !          1752:       exec_cmd="\$cmd$args"
        !          1753:     else
        !          1754:       # Display what would be done.
        !          1755:       if test -n "$shlibpath_var"; then
        !          1756:        eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
        !          1757:        $ECHO "export $shlibpath_var"
        !          1758:       fi
        !          1759:       $ECHO "$cmd$args"
        !          1760:       exit $EXIT_SUCCESS
        !          1761:     fi
        !          1762: }
        !          1763: 
        !          1764: test "$mode" = execute && func_mode_execute ${1+"$@"}
        !          1765: 
        !          1766: 
        !          1767: # func_mode_finish arg...
        !          1768: func_mode_finish ()
        !          1769: {
        !          1770:     $opt_debug
        !          1771:     libdirs="$nonopt"
        !          1772:     admincmds=
        !          1773: 
        !          1774:     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
        !          1775:       for dir
        !          1776:       do
        !          1777:        libdirs="$libdirs $dir"
        !          1778:       done
        !          1779: 
        !          1780:       for libdir in $libdirs; do
        !          1781:        if test -n "$finish_cmds"; then
        !          1782:          # Do each command in the finish commands.
        !          1783:          func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
        !          1784: '"$cmd"'"'
        !          1785:        fi
        !          1786:        if test -n "$finish_eval"; then
        !          1787:          # Do the single finish_eval.
        !          1788:          eval cmds=\"$finish_eval\"
        !          1789:          $opt_dry_run || eval "$cmds" || admincmds="$admincmds
        !          1790:        $cmds"
        !          1791:        fi
        !          1792:       done
        !          1793:     fi
        !          1794: 
        !          1795:     # Exit here if they wanted silent mode.
        !          1796:     $opt_silent && exit $EXIT_SUCCESS
        !          1797: 
        !          1798:     $ECHO "X----------------------------------------------------------------------" | $Xsed
        !          1799:     $ECHO "Libraries have been installed in:"
        !          1800:     for libdir in $libdirs; do
        !          1801:       $ECHO "   $libdir"
        !          1802:     done
        !          1803:     $ECHO
        !          1804:     $ECHO "If you ever happen to want to link against installed libraries"
        !          1805:     $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
        !          1806:     $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
        !          1807:     $ECHO "flag during linking and do at least one of the following:"
        !          1808:     if test -n "$shlibpath_var"; then
        !          1809:       $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
        !          1810:       $ECHO "     during execution"
        !          1811:     fi
        !          1812:     if test -n "$runpath_var"; then
        !          1813:       $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
        !          1814:       $ECHO "     during linking"
        !          1815:     fi
        !          1816:     if test -n "$hardcode_libdir_flag_spec"; then
        !          1817:       libdir=LIBDIR
        !          1818:       eval flag=\"$hardcode_libdir_flag_spec\"
        !          1819: 
        !          1820:       $ECHO "   - use the \`$flag' linker flag"
        !          1821:     fi
        !          1822:     if test -n "$admincmds"; then
        !          1823:       $ECHO "   - have your system administrator run these commands:$admincmds"
        !          1824:     fi
        !          1825:     if test -f /etc/ld.so.conf; then
        !          1826:       $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
        !          1827:     fi
        !          1828:     $ECHO
        !          1829: 
        !          1830:     $ECHO "See any operating system documentation about shared libraries for"
        !          1831:     case $host in
        !          1832:       solaris2.[6789]|solaris2.1[0-9])
        !          1833:         $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
        !          1834:        $ECHO "pages."
        !          1835:        ;;
        !          1836:       *)
        !          1837:         $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
        !          1838:         ;;
        !          1839:     esac
        !          1840:     $ECHO "X----------------------------------------------------------------------" | $Xsed
        !          1841:     exit $EXIT_SUCCESS
        !          1842: }
        !          1843: 
        !          1844: test "$mode" = finish && func_mode_finish ${1+"$@"}
        !          1845: 
        !          1846: 
        !          1847: # func_mode_install arg...
        !          1848: func_mode_install ()
        !          1849: {
        !          1850:     $opt_debug
        !          1851:     # There may be an optional sh(1) argument at the beginning of
        !          1852:     # install_prog (especially on Windows NT).
        !          1853:     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        !          1854:        # Allow the use of GNU shtool's install command.
        !          1855:        $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
        !          1856:       # Aesthetically quote it.
        !          1857:       func_quote_for_eval "$nonopt"
        !          1858:       install_prog="$func_quote_for_eval_result "
        !          1859:       arg=$1
        !          1860:       shift
        !          1861:     else
        !          1862:       install_prog=
        !          1863:       arg=$nonopt
        !          1864:     fi
        !          1865: 
        !          1866:     # The real first argument should be the name of the installation program.
        !          1867:     # Aesthetically quote it.
        !          1868:     func_quote_for_eval "$arg"
        !          1869:     install_prog="$install_prog$func_quote_for_eval_result"
        !          1870: 
        !          1871:     # We need to accept at least all the BSD install flags.
        !          1872:     dest=
        !          1873:     files=
        !          1874:     opts=
        !          1875:     prev=
        !          1876:     install_type=
        !          1877:     isdir=no
        !          1878:     stripme=
        !          1879:     for arg
        !          1880:     do
        !          1881:       if test -n "$dest"; then
        !          1882:        files="$files $dest"
        !          1883:        dest=$arg
        !          1884:        continue
        !          1885:       fi
        !          1886: 
        !          1887:       case $arg in
        !          1888:       -d) isdir=yes ;;
        !          1889:       -f)
        !          1890:        case " $install_prog " in
        !          1891:        *[\\\ /]cp\ *) ;;
        !          1892:        *) prev=$arg ;;
        !          1893:        esac
        !          1894:        ;;
        !          1895:       -g | -m | -o)
        !          1896:        prev=$arg
        !          1897:        ;;
        !          1898:       -s)
        !          1899:        stripme=" -s"
        !          1900:        continue
        !          1901:        ;;
        !          1902:       -*)
        !          1903:        ;;
        !          1904:       *)
        !          1905:        # If the previous option needed an argument, then skip it.
        !          1906:        if test -n "$prev"; then
        !          1907:          prev=
        !          1908:        else
        !          1909:          dest=$arg
        !          1910:          continue
        !          1911:        fi
        !          1912:        ;;
        !          1913:       esac
        !          1914: 
        !          1915:       # Aesthetically quote the argument.
        !          1916:       func_quote_for_eval "$arg"
        !          1917:       install_prog="$install_prog $func_quote_for_eval_result"
        !          1918:     done
        !          1919: 
        !          1920:     test -z "$install_prog" && \
        !          1921:       func_fatal_help "you must specify an install program"
        !          1922: 
        !          1923:     test -n "$prev" && \
        !          1924:       func_fatal_help "the \`$prev' option requires an argument"
        !          1925: 
        !          1926:     if test -z "$files"; then
        !          1927:       if test -z "$dest"; then
        !          1928:        func_fatal_help "no file or destination specified"
        !          1929:       else
        !          1930:        func_fatal_help "you must specify a destination"
        !          1931:       fi
        !          1932:     fi
        !          1933: 
        !          1934:     # Strip any trailing slash from the destination.
        !          1935:     func_stripname '' '/' "$dest"
        !          1936:     dest=$func_stripname_result
        !          1937: 
        !          1938:     # Check to see that the destination is a directory.
        !          1939:     test -d "$dest" && isdir=yes
        !          1940:     if test "$isdir" = yes; then
        !          1941:       destdir="$dest"
        !          1942:       destname=
        !          1943:     else
        !          1944:       func_dirname_and_basename "$dest" "" "."
        !          1945:       destdir="$func_dirname_result"
        !          1946:       destname="$func_basename_result"
        !          1947: 
        !          1948:       # Not a directory, so check to see that there is only one file specified.
        !          1949:       set dummy $files; shift
        !          1950:       test "$#" -gt 1 && \
        !          1951:        func_fatal_help "\`$dest' is not a directory"
        !          1952:     fi
        !          1953:     case $destdir in
        !          1954:     [\\/]* | [A-Za-z]:[\\/]*) ;;
        !          1955:     *)
        !          1956:       for file in $files; do
        !          1957:        case $file in
        !          1958:        *.lo) ;;
        !          1959:        *)
        !          1960:          func_fatal_help "\`$destdir' must be an absolute directory name"
        !          1961:          ;;
        !          1962:        esac
        !          1963:       done
        !          1964:       ;;
        !          1965:     esac
        !          1966: 
        !          1967:     # This variable tells wrapper scripts just to set variables rather
        !          1968:     # than running their programs.
        !          1969:     libtool_install_magic="$magic"
        !          1970: 
        !          1971:     staticlibs=
        !          1972:     future_libdirs=
        !          1973:     current_libdirs=
        !          1974:     for file in $files; do
        !          1975: 
        !          1976:       # Do each installation.
        !          1977:       case $file in
        !          1978:       *.$libext)
        !          1979:        # Do the static libraries later.
        !          1980:        staticlibs="$staticlibs $file"
        !          1981:        ;;
        !          1982: 
        !          1983:       *.la)
        !          1984:        # Check to see that this really is a libtool archive.
        !          1985:        func_lalib_unsafe_p "$file" \
        !          1986:          || func_fatal_help "\`$file' is not a valid libtool archive"
        !          1987: 
        !          1988:        library_names=
        !          1989:        old_library=
        !          1990:        relink_command=
        !          1991:        func_source "$file"
        !          1992: 
        !          1993:        # Add the libdir to current_libdirs if it is the destination.
        !          1994:        if test "X$destdir" = "X$libdir"; then
        !          1995:          case "$current_libdirs " in
        !          1996:          *" $libdir "*) ;;
        !          1997:          *) current_libdirs="$current_libdirs $libdir" ;;
        !          1998:          esac
        !          1999:        else
        !          2000:          # Note the libdir as a future libdir.
        !          2001:          case "$future_libdirs " in
        !          2002:          *" $libdir "*) ;;
        !          2003:          *) future_libdirs="$future_libdirs $libdir" ;;
        !          2004:          esac
        !          2005:        fi
        !          2006: 
        !          2007:        func_dirname "$file" "/" ""
        !          2008:        dir="$func_dirname_result"
        !          2009:        dir="$dir$objdir"
        !          2010: 
        !          2011:        if test -n "$relink_command"; then
        !          2012:          # Determine the prefix the user has applied to our future dir.
        !          2013:          inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
        !          2014: 
        !          2015:          # Don't allow the user to place us outside of our expected
        !          2016:          # location b/c this prevents finding dependent libraries that
        !          2017:          # are installed to the same prefix.
        !          2018:          # At present, this check doesn't affect windows .dll's that
        !          2019:          # are installed into $libdir/../bin (currently, that works fine)
        !          2020:          # but it's something to keep an eye on.
        !          2021:          test "$inst_prefix_dir" = "$destdir" && \
        !          2022:            func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
        !          2023: 
        !          2024:          if test -n "$inst_prefix_dir"; then
        !          2025:            # Stick the inst_prefix_dir data into the link command.
        !          2026:            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
        !          2027:          else
        !          2028:            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
        !          2029:          fi
        !          2030: 
        !          2031:          func_warning "relinking \`$file'"
        !          2032:          func_show_eval "$relink_command" \
        !          2033:            'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
        !          2034:        fi
        !          2035: 
        !          2036:        # See the names of the shared library.
        !          2037:        set dummy $library_names; shift
        !          2038:        if test -n "$1"; then
        !          2039:          realname="$1"
        !          2040:          shift
        !          2041: 
        !          2042:          srcname="$realname"
        !          2043:          test -n "$relink_command" && srcname="$realname"T
        !          2044: 
        !          2045:          # Install the shared library and build the symlinks.
        !          2046:          func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
        !          2047:              'exit $?'
        !          2048:          tstripme="$stripme"
        !          2049:          case $host_os in
        !          2050:          cygwin* | mingw* | pw32* | cegcc*)
        !          2051:            case $realname in
        !          2052:            *.dll.a)
        !          2053:              tstripme=""
        !          2054:              ;;
        !          2055:            esac
        !          2056:            ;;
        !          2057:          esac
        !          2058:          if test -n "$tstripme" && test -n "$striplib"; then
        !          2059:            func_show_eval "$striplib $destdir/$realname" 'exit $?'
        !          2060:          fi
        !          2061: 
        !          2062:          if test "$#" -gt 0; then
        !          2063:            # Delete the old symlinks, and create new ones.
        !          2064:            # Try `ln -sf' first, because the `ln' binary might depend on
        !          2065:            # the symlink we replace!  Solaris /bin/ln does not understand -f,
        !          2066:            # so we also need to try rm && ln -s.
        !          2067:            for linkname
        !          2068:            do
        !          2069:              test "$linkname" != "$realname" \
        !          2070:                && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
        !          2071:            done
        !          2072:          fi
        !          2073: 
        !          2074:          # Do each command in the postinstall commands.
        !          2075:          lib="$destdir/$realname"
        !          2076:          func_execute_cmds "$postinstall_cmds" 'exit $?'
        !          2077:        fi
        !          2078: 
        !          2079:        # Install the pseudo-library for information purposes.
        !          2080:        func_basename "$file"
        !          2081:        name="$func_basename_result"
        !          2082:        instname="$dir/$name"i
        !          2083:        func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
        !          2084: 
        !          2085:        # Maybe install the static library, too.
        !          2086:        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
        !          2087:        ;;
        !          2088: 
        !          2089:       *.lo)
        !          2090:        # Install (i.e. copy) a libtool object.
        !          2091: 
        !          2092:        # Figure out destination file name, if it wasn't already specified.
        !          2093:        if test -n "$destname"; then
        !          2094:          destfile="$destdir/$destname"
        !          2095:        else
        !          2096:          func_basename "$file"
        !          2097:          destfile="$func_basename_result"
        !          2098:          destfile="$destdir/$destfile"
        !          2099:        fi
        !          2100: 
        !          2101:        # Deduce the name of the destination old-style object file.
        !          2102:        case $destfile in
        !          2103:        *.lo)
        !          2104:          func_lo2o "$destfile"
        !          2105:          staticdest=$func_lo2o_result
        !          2106:          ;;
        !          2107:        *.$objext)
        !          2108:          staticdest="$destfile"
        !          2109:          destfile=
        !          2110:          ;;
        !          2111:        *)
        !          2112:          func_fatal_help "cannot copy a libtool object to \`$destfile'"
        !          2113:          ;;
        !          2114:        esac
        !          2115: 
        !          2116:        # Install the libtool object if requested.
        !          2117:        test -n "$destfile" && \
        !          2118:          func_show_eval "$install_prog $file $destfile" 'exit $?'
        !          2119: 
        !          2120:        # Install the old object if enabled.
        !          2121:        if test "$build_old_libs" = yes; then
        !          2122:          # Deduce the name of the old-style object file.
        !          2123:          func_lo2o "$file"
        !          2124:          staticobj=$func_lo2o_result
        !          2125:          func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
        !          2126:        fi
        !          2127:        exit $EXIT_SUCCESS
        !          2128:        ;;
        !          2129: 
        !          2130:       *)
        !          2131:        # Figure out destination file name, if it wasn't already specified.
        !          2132:        if test -n "$destname"; then
        !          2133:          destfile="$destdir/$destname"
        !          2134:        else
        !          2135:          func_basename "$file"
        !          2136:          destfile="$func_basename_result"
        !          2137:          destfile="$destdir/$destfile"
        !          2138:        fi
        !          2139: 
        !          2140:        # If the file is missing, and there is a .exe on the end, strip it
        !          2141:        # because it is most likely a libtool script we actually want to
        !          2142:        # install
        !          2143:        stripped_ext=""
        !          2144:        case $file in
        !          2145:          *.exe)
        !          2146:            if test ! -f "$file"; then
        !          2147:              func_stripname '' '.exe' "$file"
        !          2148:              file=$func_stripname_result
        !          2149:              stripped_ext=".exe"
        !          2150:            fi
        !          2151:            ;;
        !          2152:        esac
        !          2153: 
        !          2154:        # Do a test to see if this is really a libtool program.
        !          2155:        case $host in
        !          2156:        *cygwin* | *mingw*)
        !          2157:            if func_ltwrapper_executable_p "$file"; then
        !          2158:              func_ltwrapper_scriptname "$file"
        !          2159:              wrapper=$func_ltwrapper_scriptname_result
        !          2160:            else
        !          2161:              func_stripname '' '.exe' "$file"
        !          2162:              wrapper=$func_stripname_result
        !          2163:            fi
        !          2164:            ;;
        !          2165:        *)
        !          2166:            wrapper=$file
        !          2167:            ;;
        !          2168:        esac
        !          2169:        if func_ltwrapper_script_p "$wrapper"; then
        !          2170:          notinst_deplibs=
        !          2171:          relink_command=
        !          2172: 
        !          2173:          func_source "$wrapper"
        !          2174: 
        !          2175:          # Check the variables that should have been set.
        !          2176:          test -z "$generated_by_libtool_version" && \
        !          2177:            func_fatal_error "invalid libtool wrapper script \`$wrapper'"
        !          2178: 
        !          2179:          finalize=yes
        !          2180:          for lib in $notinst_deplibs; do
        !          2181:            # Check to see that each library is installed.
        !          2182:            libdir=
        !          2183:            if test -f "$lib"; then
        !          2184:              func_source "$lib"
        !          2185:            fi
        !          2186:            libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
        !          2187:            if test -n "$libdir" && test ! -f "$libfile"; then
        !          2188:              func_warning "\`$lib' has not been installed in \`$libdir'"
        !          2189:              finalize=no
        !          2190:            fi
        !          2191:          done
        !          2192: 
        !          2193:          relink_command=
        !          2194:          func_source "$wrapper"
        !          2195: 
        !          2196:          outputname=
        !          2197:          if test "$fast_install" = no && test -n "$relink_command"; then
        !          2198:            $opt_dry_run || {
        !          2199:              if test "$finalize" = yes; then
        !          2200:                tmpdir=`func_mktempdir`
        !          2201:                func_basename "$file$stripped_ext"
        !          2202:                file="$func_basename_result"
        !          2203:                outputname="$tmpdir/$file"
        !          2204:                # Replace the output file specification.
        !          2205:                relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
        !          2206: 
        !          2207:                $opt_silent || {
        !          2208:                  func_quote_for_expand "$relink_command"
        !          2209:                  eval "func_echo $func_quote_for_expand_result"
        !          2210:                }
        !          2211:                if eval "$relink_command"; then :
        !          2212:                  else
        !          2213:                  func_error "error: relink \`$file' with the above command before installing it"
        !          2214:                  $opt_dry_run || ${RM}r "$tmpdir"
        !          2215:                  continue
        !          2216:                fi
        !          2217:                file="$outputname"
        !          2218:              else
        !          2219:                func_warning "cannot relink \`$file'"
        !          2220:              fi
        !          2221:            }
        !          2222:          else
        !          2223:            # Install the binary that we compiled earlier.
        !          2224:            file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
        !          2225:          fi
        !          2226:        fi
        !          2227: 
        !          2228:        # remove .exe since cygwin /usr/bin/install will append another
        !          2229:        # one anyway
        !          2230:        case $install_prog,$host in
        !          2231:        */usr/bin/install*,*cygwin*)
        !          2232:          case $file:$destfile in
        !          2233:          *.exe:*.exe)
        !          2234:            # this is ok
        !          2235:            ;;
        !          2236:          *.exe:*)
        !          2237:            destfile=$destfile.exe
        !          2238:            ;;
        !          2239:          *:*.exe)
        !          2240:            func_stripname '' '.exe' "$destfile"
        !          2241:            destfile=$func_stripname_result
        !          2242:            ;;
        !          2243:          esac
        !          2244:          ;;
        !          2245:        esac
        !          2246:        func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
        !          2247:        $opt_dry_run || if test -n "$outputname"; then
        !          2248:          ${RM}r "$tmpdir"
        !          2249:        fi
        !          2250:        ;;
        !          2251:       esac
        !          2252:     done
        !          2253: 
        !          2254:     for file in $staticlibs; do
        !          2255:       func_basename "$file"
        !          2256:       name="$func_basename_result"
        !          2257: 
        !          2258:       # Set up the ranlib parameters.
        !          2259:       oldlib="$destdir/$name"
        !          2260: 
        !          2261:       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
        !          2262: 
        !          2263:       if test -n "$stripme" && test -n "$old_striplib"; then
        !          2264:        func_show_eval "$old_striplib $oldlib" 'exit $?'
        !          2265:       fi
        !          2266: 
        !          2267:       # Do each command in the postinstall commands.
        !          2268:       func_execute_cmds "$old_postinstall_cmds" 'exit $?'
        !          2269:     done
        !          2270: 
        !          2271:     test -n "$future_libdirs" && \
        !          2272:       func_warning "remember to run \`$progname --finish$future_libdirs'"
        !          2273: 
        !          2274:     if test -n "$current_libdirs"; then
        !          2275:       # Maybe just do a dry run.
        !          2276:       $opt_dry_run && current_libdirs=" -n$current_libdirs"
        !          2277:       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
        !          2278:     else
        !          2279:       exit $EXIT_SUCCESS
        !          2280:     fi
        !          2281: }
        !          2282: 
        !          2283: test "$mode" = install && func_mode_install ${1+"$@"}
        !          2284: 
        !          2285: 
        !          2286: # func_generate_dlsyms outputname originator pic_p
        !          2287: # Extract symbols from dlprefiles and create ${outputname}S.o with
        !          2288: # a dlpreopen symbol table.
        !          2289: func_generate_dlsyms ()
        !          2290: {
        !          2291:     $opt_debug
        !          2292:     my_outputname="$1"
        !          2293:     my_originator="$2"
        !          2294:     my_pic_p="${3-no}"
        !          2295:     my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
        !          2296:     my_dlsyms=
        !          2297: 
        !          2298:     if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        !          2299:       if test -n "$NM" && test -n "$global_symbol_pipe"; then
        !          2300:        my_dlsyms="${my_outputname}S.c"
        !          2301:       else
        !          2302:        func_error "not configured to extract global symbols from dlpreopened files"
        !          2303:       fi
        !          2304:     fi
        !          2305: 
        !          2306:     if test -n "$my_dlsyms"; then
        !          2307:       case $my_dlsyms in
        !          2308:       "") ;;
        !          2309:       *.c)
        !          2310:        # Discover the nlist of each of the dlfiles.
        !          2311:        nlist="$output_objdir/${my_outputname}.nm"
        !          2312: 
        !          2313:        func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
        !          2314: 
        !          2315:        # Parse the name list into a source file.
        !          2316:        func_verbose "creating $output_objdir/$my_dlsyms"
        !          2317: 
        !          2318:        $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
        !          2319: /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
        !          2320: /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
        !          2321: 
        !          2322: #ifdef __cplusplus
        !          2323: extern \"C\" {
        !          2324: #endif
        !          2325: 
        !          2326: /* External symbol declarations for the compiler. */\
        !          2327: "
        !          2328: 
        !          2329:        if test "$dlself" = yes; then
        !          2330:          func_verbose "generating symbol list for \`$output'"
        !          2331: 
        !          2332:          $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
        !          2333: 
        !          2334:          # Add our own program objects to the symbol list.
        !          2335:          progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
        !          2336:          for progfile in $progfiles; do
        !          2337:            func_verbose "extracting global C symbols from \`$progfile'"
        !          2338:            $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
        !          2339:          done
        !          2340: 
        !          2341:          if test -n "$exclude_expsyms"; then
        !          2342:            $opt_dry_run || {
        !          2343:              eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
        !          2344:              eval '$MV "$nlist"T "$nlist"'
        !          2345:            }
        !          2346:          fi
        !          2347: 
        !          2348:          if test -n "$export_symbols_regex"; then
        !          2349:            $opt_dry_run || {
        !          2350:              eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
        !          2351:              eval '$MV "$nlist"T "$nlist"'
        !          2352:            }
        !          2353:          fi
        !          2354: 
        !          2355:          # Prepare the list of exported symbols
        !          2356:          if test -z "$export_symbols"; then
        !          2357:            export_symbols="$output_objdir/$outputname.exp"
        !          2358:            $opt_dry_run || {
        !          2359:              $RM $export_symbols
        !          2360:              eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
        !          2361:              case $host in
        !          2362:              *cygwin* | *mingw* | *cegcc* )
        !          2363:                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
        !          2364:                 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
        !          2365:                ;;
        !          2366:              esac
        !          2367:            }
        !          2368:          else
        !          2369:            $opt_dry_run || {
        !          2370:              eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
        !          2371:              eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
        !          2372:              eval '$MV "$nlist"T "$nlist"'
        !          2373:              case $host in
        !          2374:                *cygwin | *mingw* | *cegcc* )
        !          2375:                  eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
        !          2376:                  eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
        !          2377:                  ;;
        !          2378:              esac
        !          2379:            }
        !          2380:          fi
        !          2381:        fi
        !          2382: 
        !          2383:        for dlprefile in $dlprefiles; do
        !          2384:          func_verbose "extracting global C symbols from \`$dlprefile'"
        !          2385:          func_basename "$dlprefile"
        !          2386:          name="$func_basename_result"
        !          2387:          $opt_dry_run || {
        !          2388:            eval '$ECHO ": $name " >> "$nlist"'
        !          2389:            eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
        !          2390:          }
        !          2391:        done
        !          2392: 
        !          2393:        $opt_dry_run || {
        !          2394:          # Make sure we have at least an empty file.
        !          2395:          test -f "$nlist" || : > "$nlist"
        !          2396: 
        !          2397:          if test -n "$exclude_expsyms"; then
        !          2398:            $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
        !          2399:            $MV "$nlist"T "$nlist"
        !          2400:          fi
        !          2401: 
        !          2402:          # Try sorting and uniquifying the output.
        !          2403:          if $GREP -v "^: " < "$nlist" |
        !          2404:              if sort -k 3 </dev/null >/dev/null 2>&1; then
        !          2405:                sort -k 3
        !          2406:              else
        !          2407:                sort +2
        !          2408:              fi |
        !          2409:              uniq > "$nlist"S; then
        !          2410:            :
        !          2411:          else
        !          2412:            $GREP -v "^: " < "$nlist" > "$nlist"S
        !          2413:          fi
        !          2414: 
        !          2415:          if test -f "$nlist"S; then
        !          2416:            eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
        !          2417:          else
        !          2418:            $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
        !          2419:          fi
        !          2420: 
        !          2421:          $ECHO >> "$output_objdir/$my_dlsyms" "\
        !          2422: 
        !          2423: /* The mapping between symbol names and symbols.  */
        !          2424: typedef struct {
        !          2425:   const char *name;
        !          2426:   void *address;
        !          2427: } lt_dlsymlist;
        !          2428: "
        !          2429:          case $host in
        !          2430:          *cygwin* | *mingw* | *cegcc* )
        !          2431:            $ECHO >> "$output_objdir/$my_dlsyms" "\
        !          2432: /* DATA imports from DLLs on WIN32 con't be const, because
        !          2433:    runtime relocations are performed -- see ld's documentation
        !          2434:    on pseudo-relocs.  */"
        !          2435:            lt_dlsym_const= ;;
        !          2436:          *osf5*)
        !          2437:            echo >> "$output_objdir/$my_dlsyms" "\
        !          2438: /* This system does not cope well with relocations in const data */"
        !          2439:            lt_dlsym_const= ;;
        !          2440:          *)
        !          2441:            lt_dlsym_const=const ;;
        !          2442:          esac
        !          2443: 
        !          2444:          $ECHO >> "$output_objdir/$my_dlsyms" "\
        !          2445: extern $lt_dlsym_const lt_dlsymlist
        !          2446: lt_${my_prefix}_LTX_preloaded_symbols[];
        !          2447: $lt_dlsym_const lt_dlsymlist
        !          2448: lt_${my_prefix}_LTX_preloaded_symbols[] =
        !          2449: {\
        !          2450:   { \"$my_originator\", (void *) 0 },"
        !          2451: 
        !          2452:          case $need_lib_prefix in
        !          2453:          no)
        !          2454:            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
        !          2455:            ;;
        !          2456:          *)
        !          2457:            eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
        !          2458:            ;;
        !          2459:          esac
        !          2460:          $ECHO >> "$output_objdir/$my_dlsyms" "\
        !          2461:   {0, (void *) 0}
        !          2462: };
        !          2463: 
        !          2464: /* This works around a problem in FreeBSD linker */
        !          2465: #ifdef FREEBSD_WORKAROUND
        !          2466: static const void *lt_preloaded_setup() {
        !          2467:   return lt_${my_prefix}_LTX_preloaded_symbols;
        !          2468: }
        !          2469: #endif
        !          2470: 
        !          2471: #ifdef __cplusplus
        !          2472: }
        !          2473: #endif\
        !          2474: "
        !          2475:        } # !$opt_dry_run
        !          2476: 
        !          2477:        pic_flag_for_symtable=
        !          2478:        case "$compile_command " in
        !          2479:        *" -static "*) ;;
        !          2480:        *)
        !          2481:          case $host in
        !          2482:          # compiling the symbol table file with pic_flag works around
        !          2483:          # a FreeBSD bug that causes programs to crash when -lm is
        !          2484:          # linked before any other PIC object.  But we must not use
        !          2485:          # pic_flag when linking with -static.  The problem exists in
        !          2486:          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
        !          2487:          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
        !          2488:            pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
        !          2489:          *-*-hpux*)
        !          2490:            pic_flag_for_symtable=" $pic_flag"  ;;
        !          2491:          *)
        !          2492:            if test "X$my_pic_p" != Xno; then
        !          2493:              pic_flag_for_symtable=" $pic_flag"
        !          2494:            fi
        !          2495:            ;;
        !          2496:          esac
        !          2497:          ;;
        !          2498:        esac
        !          2499:        symtab_cflags=
        !          2500:        for arg in $LTCFLAGS; do
        !          2501:          case $arg in
        !          2502:          -pie | -fpie | -fPIE) ;;
        !          2503:          *) symtab_cflags="$symtab_cflags $arg" ;;
        !          2504:          esac
        !          2505:        done
        !          2506: 
        !          2507:        # Now compile the dynamic symbol file.
        !          2508:        func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
        !          2509: 
        !          2510:        # Clean up the generated files.
        !          2511:        func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
        !          2512: 
        !          2513:        # Transform the symbol file into the correct name.
        !          2514:        symfileobj="$output_objdir/${my_outputname}S.$objext"
        !          2515:        case $host in
        !          2516:        *cygwin* | *mingw* | *cegcc* )
        !          2517:          if test -f "$output_objdir/$my_outputname.def"; then
        !          2518:            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
        !          2519:            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
        !          2520:          else
        !          2521:            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
        !          2522:            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
        !          2523:          fi
        !          2524:          ;;
        !          2525:        *)
        !          2526:          compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
        !          2527:          finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
        !          2528:          ;;
        !          2529:        esac
        !          2530:        ;;
        !          2531:       *)
        !          2532:        func_fatal_error "unknown suffix for \`$my_dlsyms'"
        !          2533:        ;;
        !          2534:       esac
        !          2535:     else
        !          2536:       # We keep going just in case the user didn't refer to
        !          2537:       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
        !          2538:       # really was required.
        !          2539: 
        !          2540:       # Nullify the symbol file.
        !          2541:       compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
        !          2542:       finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
        !          2543:     fi
        !          2544: }
        !          2545: 
        !          2546: # func_win32_libid arg
        !          2547: # return the library type of file 'arg'
        !          2548: #
        !          2549: # Need a lot of goo to handle *both* DLLs and import libs
        !          2550: # Has to be a shell function in order to 'eat' the argument
        !          2551: # that is supplied when $file_magic_command is called.
        !          2552: func_win32_libid ()
        !          2553: {
        !          2554:   $opt_debug
        !          2555:   win32_libid_type="unknown"
        !          2556:   win32_fileres=`file -L $1 2>/dev/null`
        !          2557:   case $win32_fileres in
        !          2558:   *ar\ archive\ import\ library*) # definitely import
        !          2559:     win32_libid_type="x86 archive import"
        !          2560:     ;;
        !          2561:   *ar\ archive*) # could be an import, or static
        !          2562:     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
        !          2563:        $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
        !          2564:       win32_nmres=`eval $NM -f posix -A $1 |
        !          2565:        $SED -n -e '
        !          2566:            1,100{
        !          2567:                / I /{
        !          2568:                    s,.*,import,
        !          2569:                    p
        !          2570:                    q
        !          2571:                }
        !          2572:            }'`
        !          2573:       case $win32_nmres in
        !          2574:       import*)  win32_libid_type="x86 archive import";;
        !          2575:       *)        win32_libid_type="x86 archive static";;
        !          2576:       esac
        !          2577:     fi
        !          2578:     ;;
        !          2579:   *DLL*)
        !          2580:     win32_libid_type="x86 DLL"
        !          2581:     ;;
        !          2582:   *executable*) # but shell scripts are "executable" too...
        !          2583:     case $win32_fileres in
        !          2584:     *MS\ Windows\ PE\ Intel*)
        !          2585:       win32_libid_type="x86 DLL"
        !          2586:       ;;
        !          2587:     esac
        !          2588:     ;;
        !          2589:   esac
        !          2590:   $ECHO "$win32_libid_type"
        !          2591: }
        !          2592: 
        !          2593: 
        !          2594: 
        !          2595: # func_extract_an_archive dir oldlib
        !          2596: func_extract_an_archive ()
        !          2597: {
        !          2598:     $opt_debug
        !          2599:     f_ex_an_ar_dir="$1"; shift
        !          2600:     f_ex_an_ar_oldlib="$1"
        !          2601:     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
        !          2602:     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
        !          2603:      :
        !          2604:     else
        !          2605:       func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
        !          2606:     fi
        !          2607: }
        !          2608: 
        !          2609: 
        !          2610: # func_extract_archives gentop oldlib ...
        !          2611: func_extract_archives ()
        !          2612: {
        !          2613:     $opt_debug
        !          2614:     my_gentop="$1"; shift
        !          2615:     my_oldlibs=${1+"$@"}
        !          2616:     my_oldobjs=""
        !          2617:     my_xlib=""
        !          2618:     my_xabs=""
        !          2619:     my_xdir=""
        !          2620: 
        !          2621:     for my_xlib in $my_oldlibs; do
        !          2622:       # Extract the objects.
        !          2623:       case $my_xlib in
        !          2624:        [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
        !          2625:        *) my_xabs=`pwd`"/$my_xlib" ;;
        !          2626:       esac
        !          2627:       func_basename "$my_xlib"
        !          2628:       my_xlib="$func_basename_result"
        !          2629:       my_xlib_u=$my_xlib
        !          2630:       while :; do
        !          2631:         case " $extracted_archives " in
        !          2632:        *" $my_xlib_u "*)
        !          2633:          func_arith $extracted_serial + 1
        !          2634:          extracted_serial=$func_arith_result
        !          2635:          my_xlib_u=lt$extracted_serial-$my_xlib ;;
        !          2636:        *) break ;;
        !          2637:        esac
        !          2638:       done
        !          2639:       extracted_archives="$extracted_archives $my_xlib_u"
        !          2640:       my_xdir="$my_gentop/$my_xlib_u"
        !          2641: 
        !          2642:       func_mkdir_p "$my_xdir"
        !          2643: 
        !          2644:       case $host in
        !          2645:       *-darwin*)
        !          2646:        func_verbose "Extracting $my_xabs"
        !          2647:        # Do not bother doing anything if just a dry run
        !          2648:        $opt_dry_run || {
        !          2649:          darwin_orig_dir=`pwd`
        !          2650:          cd $my_xdir || exit $?
        !          2651:          darwin_archive=$my_xabs
        !          2652:          darwin_curdir=`pwd`
        !          2653:          darwin_base_archive=`basename "$darwin_archive"`
        !          2654:          darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
        !          2655:          if test -n "$darwin_arches"; then
        !          2656:            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
        !          2657:            darwin_arch=
        !          2658:            func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
        !          2659:            for darwin_arch in  $darwin_arches ; do
        !          2660:              func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
        !          2661:              $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
        !          2662:              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
        !          2663:              func_extract_an_archive "`pwd`" "${darwin_base_archive}"
        !          2664:              cd "$darwin_curdir"
        !          2665:              $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
        !          2666:            done # $darwin_arches
        !          2667:             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
        !          2668:            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
        !          2669:            darwin_file=
        !          2670:            darwin_files=
        !          2671:            for darwin_file in $darwin_filelist; do
        !          2672:              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
        !          2673:              $LIPO -create -output "$darwin_file" $darwin_files
        !          2674:            done # $darwin_filelist
        !          2675:            $RM -rf unfat-$$
        !          2676:            cd "$darwin_orig_dir"
        !          2677:          else
        !          2678:            cd $darwin_orig_dir
        !          2679:            func_extract_an_archive "$my_xdir" "$my_xabs"
        !          2680:          fi # $darwin_arches
        !          2681:        } # !$opt_dry_run
        !          2682:        ;;
        !          2683:       *)
        !          2684:         func_extract_an_archive "$my_xdir" "$my_xabs"
        !          2685:        ;;
        !          2686:       esac
        !          2687:       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
        !          2688:     done
        !          2689: 
        !          2690:     func_extract_archives_result="$my_oldobjs"
        !          2691: }
        !          2692: 
        !          2693: 
        !          2694: 
        !          2695: # func_emit_wrapper_part1 [arg=no]
        !          2696: #
        !          2697: # Emit the first part of a libtool wrapper script on stdout.
        !          2698: # For more information, see the description associated with
        !          2699: # func_emit_wrapper(), below.
        !          2700: func_emit_wrapper_part1 ()
        !          2701: {
        !          2702:        func_emit_wrapper_part1_arg1=no
        !          2703:        if test -n "$1" ; then
        !          2704:          func_emit_wrapper_part1_arg1=$1
        !          2705:        fi
        !          2706: 
        !          2707:        $ECHO "\
        !          2708: #! $SHELL
        !          2709: 
        !          2710: # $output - temporary wrapper script for $objdir/$outputname
        !          2711: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
        !          2712: #
        !          2713: # The $output program cannot be directly executed until all the libtool
        !          2714: # libraries that it depends on are installed.
        !          2715: #
        !          2716: # This wrapper script should never be moved out of the build directory.
        !          2717: # If it is, it will not operate correctly.
        !          2718: 
        !          2719: # Sed substitution that helps us do robust quoting.  It backslashifies
        !          2720: # metacharacters that are still active within double-quoted strings.
        !          2721: Xsed='${SED} -e 1s/^X//'
        !          2722: sed_quote_subst='$sed_quote_subst'
        !          2723: 
        !          2724: # Be Bourne compatible
        !          2725: if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
        !          2726:   emulate sh
        !          2727:   NULLCMD=:
        !          2728:   # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
        !          2729:   # is contrary to our usage.  Disable this feature.
        !          2730:   alias -g '\${1+\"\$@\"}'='\"\$@\"'
        !          2731:   setopt NO_GLOB_SUBST
        !          2732: else
        !          2733:   case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
        !          2734: fi
        !          2735: BIN_SH=xpg4; export BIN_SH # for Tru64
        !          2736: DUALCASE=1; export DUALCASE # for MKS sh
        !          2737: 
        !          2738: # The HP-UX ksh and POSIX shell print the target directory to stdout
        !          2739: # if CDPATH is set.
        !          2740: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
        !          2741: 
        !          2742: relink_command=\"$relink_command\"
        !          2743: 
        !          2744: # This environment variable determines our operation mode.
        !          2745: if test \"\$libtool_install_magic\" = \"$magic\"; then
        !          2746:   # install mode needs the following variables:
        !          2747:   generated_by_libtool_version='$macro_version'
        !          2748:   notinst_deplibs='$notinst_deplibs'
        !          2749: else
        !          2750:   # When we are sourced in execute mode, \$file and \$ECHO are already set.
        !          2751:   if test \"\$libtool_execute_magic\" != \"$magic\"; then
        !          2752:     ECHO=\"$qecho\"
        !          2753:     file=\"\$0\"
        !          2754:     # Make sure echo works.
        !          2755:     if test \"X\$1\" = X--no-reexec; then
        !          2756:       # Discard the --no-reexec flag, and continue.
        !          2757:       shift
        !          2758:     elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
        !          2759:       # Yippee, \$ECHO works!
        !          2760:       :
        !          2761:     else
        !          2762:       # Restart under the correct shell, and then maybe \$ECHO will work.
        !          2763:       exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
        !          2764:     fi
        !          2765:   fi\
        !          2766: "
        !          2767:        $ECHO "\
        !          2768: 
        !          2769:   # Find the directory that this script lives in.
        !          2770:   thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
        !          2771:   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
        !          2772: 
        !          2773:   # Follow symbolic links until we get to the real thisdir.
        !          2774:   file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
        !          2775:   while test -n \"\$file\"; do
        !          2776:     destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
        !          2777: 
        !          2778:     # If there was a directory component, then change thisdir.
        !          2779:     if test \"x\$destdir\" != \"x\$file\"; then
        !          2780:       case \"\$destdir\" in
        !          2781:       [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
        !          2782:       *) thisdir=\"\$thisdir/\$destdir\" ;;
        !          2783:       esac
        !          2784:     fi
        !          2785: 
        !          2786:     file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
        !          2787:     file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
        !          2788:   done
        !          2789: "
        !          2790: }
        !          2791: # end: func_emit_wrapper_part1
        !          2792: 
        !          2793: # func_emit_wrapper_part2 [arg=no]
        !          2794: #
        !          2795: # Emit the second part of a libtool wrapper script on stdout.
        !          2796: # For more information, see the description associated with
        !          2797: # func_emit_wrapper(), below.
        !          2798: func_emit_wrapper_part2 ()
        !          2799: {
        !          2800:        func_emit_wrapper_part2_arg1=no
        !          2801:        if test -n "$1" ; then
        !          2802:          func_emit_wrapper_part2_arg1=$1
        !          2803:        fi
        !          2804: 
        !          2805:        $ECHO "\
        !          2806: 
        !          2807:   # Usually 'no', except on cygwin/mingw when embedded into
        !          2808:   # the cwrapper.
        !          2809:   WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
        !          2810:   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
        !          2811:     # special case for '.'
        !          2812:     if test \"\$thisdir\" = \".\"; then
        !          2813:       thisdir=\`pwd\`
        !          2814:     fi
        !          2815:     # remove .libs from thisdir
        !          2816:     case \"\$thisdir\" in
        !          2817:     *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
        !          2818:     $objdir )   thisdir=. ;;
        !          2819:     esac
        !          2820:   fi
        !          2821: 
        !          2822:   # Try to get the absolute directory name.
        !          2823:   absdir=\`cd \"\$thisdir\" && pwd\`
        !          2824:   test -n \"\$absdir\" && thisdir=\"\$absdir\"
        !          2825: "
        !          2826: 
        !          2827:        if test "$fast_install" = yes; then
        !          2828:          $ECHO "\
        !          2829:   program=lt-'$outputname'$exeext
        !          2830:   progdir=\"\$thisdir/$objdir\"
        !          2831: 
        !          2832:   if test ! -f \"\$progdir/\$program\" ||
        !          2833:      { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
        !          2834:        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
        !          2835: 
        !          2836:     file=\"\$\$-\$program\"
        !          2837: 
        !          2838:     if test ! -d \"\$progdir\"; then
        !          2839:       $MKDIR \"\$progdir\"
        !          2840:     else
        !          2841:       $RM \"\$progdir/\$file\"
        !          2842:     fi"
        !          2843: 
        !          2844:          $ECHO "\
        !          2845: 
        !          2846:     # relink executable if necessary
        !          2847:     if test -n \"\$relink_command\"; then
        !          2848:       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
        !          2849:       else
        !          2850:        $ECHO \"\$relink_command_output\" >&2
        !          2851:        $RM \"\$progdir/\$file\"
        !          2852:        exit 1
        !          2853:       fi
        !          2854:     fi
        !          2855: 
        !          2856:     $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
        !          2857:     { $RM \"\$progdir/\$program\";
        !          2858:       $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
        !          2859:     $RM \"\$progdir/\$file\"
        !          2860:   fi"
        !          2861:        else
        !          2862:          $ECHO "\
        !          2863:   program='$outputname'
        !          2864:   progdir=\"\$thisdir/$objdir\"
        !          2865: "
        !          2866:        fi
        !          2867: 
        !          2868:        $ECHO "\
        !          2869: 
        !          2870:   if test -f \"\$progdir/\$program\"; then"
        !          2871: 
        !          2872:        # Export our shlibpath_var if we have one.
        !          2873:        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
        !          2874:          $ECHO "\
        !          2875:     # Add our own library path to $shlibpath_var
        !          2876:     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
        !          2877: 
        !          2878:     # Some systems cannot cope with colon-terminated $shlibpath_var
        !          2879:     # The second colon is a workaround for a bug in BeOS R4 sed
        !          2880:     $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
        !          2881: 
        !          2882:     export $shlibpath_var
        !          2883: "
        !          2884:        fi
        !          2885: 
        !          2886:        # fixup the dll searchpath if we need to.
        !          2887:        if test -n "$dllsearchpath"; then
        !          2888:          $ECHO "\
        !          2889:     # Add the dll search path components to the executable PATH
        !          2890:     PATH=$dllsearchpath:\$PATH
        !          2891: "
        !          2892:        fi
        !          2893: 
        !          2894:        $ECHO "\
        !          2895:     if test \"\$libtool_execute_magic\" != \"$magic\"; then
        !          2896:       # Run the actual program with our arguments.
        !          2897: "
        !          2898:        case $host in
        !          2899:        # Backslashes separate directories on plain windows
        !          2900:        *-*-mingw | *-*-os2* | *-cegcc*)
        !          2901:          $ECHO "\
        !          2902:       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
        !          2903: "
        !          2904:          ;;
        !          2905: 
        !          2906:        *)
        !          2907:          $ECHO "\
        !          2908:       exec \"\$progdir/\$program\" \${1+\"\$@\"}
        !          2909: "
        !          2910:          ;;
        !          2911:        esac
        !          2912:        $ECHO "\
        !          2913:       \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
        !          2914:       exit 1
        !          2915:     fi
        !          2916:   else
        !          2917:     # The program doesn't exist.
        !          2918:     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
        !          2919:     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
        !          2920:     $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
        !          2921:     exit 1
        !          2922:   fi
        !          2923: fi\
        !          2924: "
        !          2925: }
        !          2926: # end: func_emit_wrapper_part2
        !          2927: 
        !          2928: 
        !          2929: # func_emit_wrapper [arg=no]
        !          2930: #
        !          2931: # Emit a libtool wrapper script on stdout.
        !          2932: # Don't directly open a file because we may want to
        !          2933: # incorporate the script contents within a cygwin/mingw
        !          2934: # wrapper executable.  Must ONLY be called from within
        !          2935: # func_mode_link because it depends on a number of variables
        !          2936: # set therein.
        !          2937: #
        !          2938: # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
        !          2939: # variable will take.  If 'yes', then the emitted script
        !          2940: # will assume that the directory in which it is stored is
        !          2941: # the $objdir directory.  This is a cygwin/mingw-specific
        !          2942: # behavior.
        !          2943: func_emit_wrapper ()
        !          2944: {
        !          2945:        func_emit_wrapper_arg1=no
        !          2946:        if test -n "$1" ; then
        !          2947:          func_emit_wrapper_arg1=$1
        !          2948:        fi
        !          2949: 
        !          2950:        # split this up so that func_emit_cwrapperexe_src
        !          2951:        # can call each part independently.
        !          2952:        func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
        !          2953:        func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
        !          2954: }
        !          2955: 
        !          2956: 
        !          2957: # func_to_host_path arg
        !          2958: #
        !          2959: # Convert paths to host format when used with build tools.
        !          2960: # Intended for use with "native" mingw (where libtool itself
        !          2961: # is running under the msys shell), or in the following cross-
        !          2962: # build environments:
        !          2963: #    $build          $host
        !          2964: #    mingw (msys)    mingw  [e.g. native]
        !          2965: #    cygwin          mingw
        !          2966: #    *nix + wine     mingw
        !          2967: # where wine is equipped with the `winepath' executable.
        !          2968: # In the native mingw case, the (msys) shell automatically
        !          2969: # converts paths for any non-msys applications it launches,
        !          2970: # but that facility isn't available from inside the cwrapper.
        !          2971: # Similar accommodations are necessary for $host mingw and
        !          2972: # $build cygwin.  Calling this function does no harm for other
        !          2973: # $host/$build combinations not listed above.
        !          2974: #
        !          2975: # ARG is the path (on $build) that should be converted to
        !          2976: # the proper representation for $host. The result is stored
        !          2977: # in $func_to_host_path_result.
        !          2978: func_to_host_path ()
        !          2979: {
        !          2980:   func_to_host_path_result="$1"
        !          2981:   if test -n "$1" ; then
        !          2982:     case $host in
        !          2983:       *mingw* )
        !          2984:         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
        !          2985:         case $build in
        !          2986:           *mingw* ) # actually, msys
        !          2987:             # awkward: cmd appends spaces to result
        !          2988:             lt_sed_strip_trailing_spaces="s/[ ]*\$//"
        !          2989:             func_to_host_path_tmp1=`( cmd //c echo "$1" |\
        !          2990:               $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
        !          2991:             func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
        !          2992:               $SED -e "$lt_sed_naive_backslashify"`
        !          2993:             ;;
        !          2994:           *cygwin* )
        !          2995:             func_to_host_path_tmp1=`cygpath -w "$1"`
        !          2996:             func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
        !          2997:               $SED -e "$lt_sed_naive_backslashify"`
        !          2998:             ;;
        !          2999:           * )
        !          3000:             # Unfortunately, winepath does not exit with a non-zero
        !          3001:             # error code, so we are forced to check the contents of
        !          3002:             # stdout. On the other hand, if the command is not
        !          3003:             # found, the shell will set an exit code of 127 and print
        !          3004:             # *an error message* to stdout. So we must check for both
        !          3005:             # error code of zero AND non-empty stdout, which explains
        !          3006:             # the odd construction:
        !          3007:             func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
        !          3008:             if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
        !          3009:               func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
        !          3010:                 $SED -e "$lt_sed_naive_backslashify"`
        !          3011:             else
        !          3012:               # Allow warning below.
        !          3013:               func_to_host_path_result=""
        !          3014:             fi
        !          3015:             ;;
        !          3016:         esac
        !          3017:         if test -z "$func_to_host_path_result" ; then
        !          3018:           func_error "Could not determine host path corresponding to"
        !          3019:           func_error "  '$1'"
        !          3020:           func_error "Continuing, but uninstalled executables may not work."
        !          3021:           # Fallback:
        !          3022:           func_to_host_path_result="$1"
        !          3023:         fi
        !          3024:         ;;
        !          3025:     esac
        !          3026:   fi
        !          3027: }
        !          3028: # end: func_to_host_path
        !          3029: 
        !          3030: # func_to_host_pathlist arg
        !          3031: #
        !          3032: # Convert pathlists to host format when used with build tools.
        !          3033: # See func_to_host_path(), above. This function supports the
        !          3034: # following $build/$host combinations (but does no harm for
        !          3035: # combinations not listed here):
        !          3036: #    $build          $host
        !          3037: #    mingw (msys)    mingw  [e.g. native]
        !          3038: #    cygwin          mingw
        !          3039: #    *nix + wine     mingw
        !          3040: #
        !          3041: # Path separators are also converted from $build format to
        !          3042: # $host format. If ARG begins or ends with a path separator
        !          3043: # character, it is preserved (but converted to $host format)
        !          3044: # on output.
        !          3045: #
        !          3046: # ARG is a pathlist (on $build) that should be converted to
        !          3047: # the proper representation on $host. The result is stored
        !          3048: # in $func_to_host_pathlist_result.
        !          3049: func_to_host_pathlist ()
        !          3050: {
        !          3051:   func_to_host_pathlist_result="$1"
        !          3052:   if test -n "$1" ; then
        !          3053:     case $host in
        !          3054:       *mingw* )
        !          3055:         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
        !          3056:         # Remove leading and trailing path separator characters from
        !          3057:         # ARG. msys behavior is inconsistent here, cygpath turns them
        !          3058:         # into '.;' and ';.', and winepath ignores them completely.
        !          3059:         func_to_host_pathlist_tmp2="$1"
        !          3060:         # Once set for this call, this variable should not be
        !          3061:         # reassigned. It is used in tha fallback case.
        !          3062:         func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
        !          3063:           $SED -e 's|^:*||' -e 's|:*$||'`
        !          3064:         case $build in
        !          3065:           *mingw* ) # Actually, msys.
        !          3066:             # Awkward: cmd appends spaces to result.
        !          3067:             lt_sed_strip_trailing_spaces="s/[ ]*\$//"
        !          3068:             func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
        !          3069:               $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
        !          3070:             func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
        !          3071:               $SED -e "$lt_sed_naive_backslashify"`
        !          3072:             ;;
        !          3073:           *cygwin* )
        !          3074:             func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
        !          3075:             func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
        !          3076:               $SED -e "$lt_sed_naive_backslashify"`
        !          3077:             ;;
        !          3078:           * )
        !          3079:             # unfortunately, winepath doesn't convert pathlists
        !          3080:             func_to_host_pathlist_result=""
        !          3081:             func_to_host_pathlist_oldIFS=$IFS
        !          3082:             IFS=:
        !          3083:             for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
        !          3084:               IFS=$func_to_host_pathlist_oldIFS
        !          3085:               if test -n "$func_to_host_pathlist_f" ; then
        !          3086:                 func_to_host_path "$func_to_host_pathlist_f"
        !          3087:                 if test -n "$func_to_host_path_result" ; then
        !          3088:                   if test -z "$func_to_host_pathlist_result" ; then
        !          3089:                     func_to_host_pathlist_result="$func_to_host_path_result"
        !          3090:                   else
        !          3091:                     func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
        !          3092:                   fi
        !          3093:                 fi
        !          3094:               fi
        !          3095:               IFS=:
        !          3096:             done
        !          3097:             IFS=$func_to_host_pathlist_oldIFS
        !          3098:             ;;
        !          3099:         esac
        !          3100:         if test -z "$func_to_host_pathlist_result" ; then
        !          3101:           func_error "Could not determine the host path(s) corresponding to"
        !          3102:           func_error "  '$1'"
        !          3103:           func_error "Continuing, but uninstalled executables may not work."
        !          3104:           # Fallback. This may break if $1 contains DOS-style drive
        !          3105:           # specifications. The fix is not to complicate the expression
        !          3106:           # below, but for the user to provide a working wine installation
        !          3107:           # with winepath so that path translation in the cross-to-mingw
        !          3108:           # case works properly.
        !          3109:           lt_replace_pathsep_nix_to_dos="s|:|;|g"
        !          3110:           func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
        !          3111:             $SED -e "$lt_replace_pathsep_nix_to_dos"`
        !          3112:         fi
        !          3113:         # Now, add the leading and trailing path separators back
        !          3114:         case "$1" in
        !          3115:           :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
        !          3116:             ;;
        !          3117:         esac
        !          3118:         case "$1" in
        !          3119:           *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
        !          3120:             ;;
        !          3121:         esac
        !          3122:         ;;
        !          3123:     esac
        !          3124:   fi
        !          3125: }
        !          3126: # end: func_to_host_pathlist
        !          3127: 
        !          3128: # func_emit_cwrapperexe_src
        !          3129: # emit the source code for a wrapper executable on stdout
        !          3130: # Must ONLY be called from within func_mode_link because
        !          3131: # it depends on a number of variable set therein.
        !          3132: func_emit_cwrapperexe_src ()
        !          3133: {
        !          3134:        cat <<EOF
        !          3135: 
        !          3136: /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
        !          3137:    Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
        !          3138: 
        !          3139:    The $output program cannot be directly executed until all the libtool
        !          3140:    libraries that it depends on are installed.
        !          3141: 
        !          3142:    This wrapper executable should never be moved out of the build directory.
        !          3143:    If it is, it will not operate correctly.
        !          3144: 
        !          3145:    Currently, it simply execs the wrapper *script* "$SHELL $output",
        !          3146:    but could eventually absorb all of the scripts functionality and
        !          3147:    exec $objdir/$outputname directly.
        !          3148: */
        !          3149: EOF
        !          3150:            cat <<"EOF"
        !          3151: #include <stdio.h>
        !          3152: #include <stdlib.h>
        !          3153: #ifdef _MSC_VER
        !          3154: # include <direct.h>
        !          3155: # include <process.h>
        !          3156: # include <io.h>
        !          3157: # define setmode _setmode
        !          3158: #else
        !          3159: # include <unistd.h>
        !          3160: # include <stdint.h>
        !          3161: # ifdef __CYGWIN__
        !          3162: #  include <io.h>
        !          3163: #  define HAVE_SETENV
        !          3164: #  ifdef __STRICT_ANSI__
        !          3165: char *realpath (const char *, char *);
        !          3166: int putenv (char *);
        !          3167: int setenv (const char *, const char *, int);
        !          3168: #  endif
        !          3169: # endif
        !          3170: #endif
        !          3171: #include <malloc.h>
        !          3172: #include <stdarg.h>
        !          3173: #include <assert.h>
        !          3174: #include <string.h>
        !          3175: #include <ctype.h>
        !          3176: #include <errno.h>
        !          3177: #include <fcntl.h>
        !          3178: #include <sys/stat.h>
        !          3179: 
        !          3180: #if defined(PATH_MAX)
        !          3181: # define LT_PATHMAX PATH_MAX
        !          3182: #elif defined(MAXPATHLEN)
        !          3183: # define LT_PATHMAX MAXPATHLEN
        !          3184: #else
        !          3185: # define LT_PATHMAX 1024
        !          3186: #endif
        !          3187: 
        !          3188: #ifndef S_IXOTH
        !          3189: # define S_IXOTH 0
        !          3190: #endif
        !          3191: #ifndef S_IXGRP
        !          3192: # define S_IXGRP 0
        !          3193: #endif
        !          3194: 
        !          3195: #ifdef _MSC_VER
        !          3196: # define S_IXUSR _S_IEXEC
        !          3197: # define stat _stat
        !          3198: # ifndef _INTPTR_T_DEFINED
        !          3199: #  define intptr_t int
        !          3200: # endif
        !          3201: #endif
        !          3202: 
        !          3203: #ifndef DIR_SEPARATOR
        !          3204: # define DIR_SEPARATOR '/'
        !          3205: # define PATH_SEPARATOR ':'
        !          3206: #endif
        !          3207: 
        !          3208: #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
        !          3209:   defined (__OS2__)
        !          3210: # define HAVE_DOS_BASED_FILE_SYSTEM
        !          3211: # define FOPEN_WB "wb"
        !          3212: # ifndef DIR_SEPARATOR_2
        !          3213: #  define DIR_SEPARATOR_2 '\\'
        !          3214: # endif
        !          3215: # ifndef PATH_SEPARATOR_2
        !          3216: #  define PATH_SEPARATOR_2 ';'
        !          3217: # endif
        !          3218: #endif
        !          3219: 
        !          3220: #ifndef DIR_SEPARATOR_2
        !          3221: # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
        !          3222: #else /* DIR_SEPARATOR_2 */
        !          3223: # define IS_DIR_SEPARATOR(ch) \
        !          3224:        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
        !          3225: #endif /* DIR_SEPARATOR_2 */
        !          3226: 
        !          3227: #ifndef PATH_SEPARATOR_2
        !          3228: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
        !          3229: #else /* PATH_SEPARATOR_2 */
        !          3230: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
        !          3231: #endif /* PATH_SEPARATOR_2 */
        !          3232: 
        !          3233: #ifdef __CYGWIN__
        !          3234: # define FOPEN_WB "wb"
        !          3235: #endif
        !          3236: 
        !          3237: #ifndef FOPEN_WB
        !          3238: # define FOPEN_WB "w"
        !          3239: #endif
        !          3240: #ifndef _O_BINARY
        !          3241: # define _O_BINARY 0
        !          3242: #endif
        !          3243: 
        !          3244: #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
        !          3245: #define XFREE(stale) do { \
        !          3246:   if (stale) { free ((void *) stale); stale = 0; } \
        !          3247: } while (0)
        !          3248: 
        !          3249: #undef LTWRAPPER_DEBUGPRINTF
        !          3250: #if defined DEBUGWRAPPER
        !          3251: # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
        !          3252: static void
        !          3253: ltwrapper_debugprintf (const char *fmt, ...)
        !          3254: {
        !          3255:     va_list args;
        !          3256:     va_start (args, fmt);
        !          3257:     (void) vfprintf (stderr, fmt, args);
        !          3258:     va_end (args);
        !          3259: }
        !          3260: #else
        !          3261: # define LTWRAPPER_DEBUGPRINTF(args)
        !          3262: #endif
        !          3263: 
        !          3264: const char *program_name = NULL;
        !          3265: 
        !          3266: void *xmalloc (size_t num);
        !          3267: char *xstrdup (const char *string);
        !          3268: const char *base_name (const char *name);
        !          3269: char *find_executable (const char *wrapper);
        !          3270: char *chase_symlinks (const char *pathspec);
        !          3271: int make_executable (const char *path);
        !          3272: int check_executable (const char *path);
        !          3273: char *strendzap (char *str, const char *pat);
        !          3274: void lt_fatal (const char *message, ...);
        !          3275: void lt_setenv (const char *name, const char *value);
        !          3276: char *lt_extend_str (const char *orig_value, const char *add, int to_end);
        !          3277: void lt_opt_process_env_set (const char *arg);
        !          3278: void lt_opt_process_env_prepend (const char *arg);
        !          3279: void lt_opt_process_env_append (const char *arg);
        !          3280: int lt_split_name_value (const char *arg, char** name, char** value);
        !          3281: void lt_update_exe_path (const char *name, const char *value);
        !          3282: void lt_update_lib_path (const char *name, const char *value);
        !          3283: 
        !          3284: static const char *script_text_part1 =
        !          3285: EOF
        !          3286: 
        !          3287:            func_emit_wrapper_part1 yes |
        !          3288:                $SED -e 's/\([\\"]\)/\\\1/g' \
        !          3289:                     -e 's/^/  "/' -e 's/$/\\n"/'
        !          3290:            echo ";"
        !          3291:            cat <<EOF
        !          3292: 
        !          3293: static const char *script_text_part2 =
        !          3294: EOF
        !          3295:            func_emit_wrapper_part2 yes |
        !          3296:                $SED -e 's/\([\\"]\)/\\\1/g' \
        !          3297:                     -e 's/^/  "/' -e 's/$/\\n"/'
        !          3298:            echo ";"
        !          3299: 
        !          3300:            cat <<EOF
        !          3301: const char * MAGIC_EXE = "$magic_exe";
        !          3302: const char * LIB_PATH_VARNAME = "$shlibpath_var";
        !          3303: EOF
        !          3304: 
        !          3305:            if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
        !          3306:               func_to_host_pathlist "$temp_rpath"
        !          3307:              cat <<EOF
        !          3308: const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
        !          3309: EOF
        !          3310:            else
        !          3311:              cat <<"EOF"
        !          3312: const char * LIB_PATH_VALUE   = "";
        !          3313: EOF
        !          3314:            fi
        !          3315: 
        !          3316:            if test -n "$dllsearchpath"; then
        !          3317:               func_to_host_pathlist "$dllsearchpath:"
        !          3318:              cat <<EOF
        !          3319: const char * EXE_PATH_VARNAME = "PATH";
        !          3320: const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
        !          3321: EOF
        !          3322:            else
        !          3323:              cat <<"EOF"
        !          3324: const char * EXE_PATH_VARNAME = "";
        !          3325: const char * EXE_PATH_VALUE   = "";
        !          3326: EOF
        !          3327:            fi
        !          3328: 
        !          3329:            if test "$fast_install" = yes; then
        !          3330:              cat <<EOF
        !          3331: const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
        !          3332: EOF
        !          3333:            else
        !          3334:              cat <<EOF
        !          3335: const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
        !          3336: EOF
        !          3337:            fi
        !          3338: 
        !          3339: 
        !          3340:            cat <<"EOF"
        !          3341: 
        !          3342: #define LTWRAPPER_OPTION_PREFIX         "--lt-"
        !          3343: #define LTWRAPPER_OPTION_PREFIX_LENGTH  5
        !          3344: 
        !          3345: static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
        !          3346: static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
        !          3347: 
        !          3348: static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
        !          3349: 
        !          3350: static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
        !          3351: static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
        !          3352:   /* argument is putenv-style "foo=bar", value of foo is set to bar */
        !          3353: 
        !          3354: static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
        !          3355: static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
        !          3356:   /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
        !          3357: 
        !          3358: static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
        !          3359: static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
        !          3360:   /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
        !          3361: 
        !          3362: int
        !          3363: main (int argc, char *argv[])
        !          3364: {
        !          3365:   char **newargz;
        !          3366:   int  newargc;
        !          3367:   char *tmp_pathspec;
        !          3368:   char *actual_cwrapper_path;
        !          3369:   char *actual_cwrapper_name;
        !          3370:   char *target_name;
        !          3371:   char *lt_argv_zero;
        !          3372:   intptr_t rval = 127;
        !          3373: 
        !          3374:   int i;
        !          3375: 
        !          3376:   program_name = (char *) xstrdup (base_name (argv[0]));
        !          3377:   LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
        !          3378:   LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
        !          3379: 
        !          3380:   /* very simple arg parsing; don't want to rely on getopt */
        !          3381:   for (i = 1; i < argc; i++)
        !          3382:     {
        !          3383:       if (strcmp (argv[i], dumpscript_opt) == 0)
        !          3384:        {
        !          3385: EOF
        !          3386:            case "$host" in
        !          3387:              *mingw* | *cygwin* )
        !          3388:                # make stdout use "unix" line endings
        !          3389:                echo "          setmode(1,_O_BINARY);"
        !          3390:                ;;
        !          3391:              esac
        !          3392: 
        !          3393:            cat <<"EOF"
        !          3394:          printf ("%s", script_text_part1);
        !          3395:          printf ("%s", script_text_part2);
        !          3396:          return 0;
        !          3397:        }
        !          3398:     }
        !          3399: 
        !          3400:   newargz = XMALLOC (char *, argc + 1);
        !          3401:   tmp_pathspec = find_executable (argv[0]);
        !          3402:   if (tmp_pathspec == NULL)
        !          3403:     lt_fatal ("Couldn't find %s", argv[0]);
        !          3404:   LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
        !          3405:                          tmp_pathspec));
        !          3406: 
        !          3407:   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
        !          3408:   LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
        !          3409:                          actual_cwrapper_path));
        !          3410:   XFREE (tmp_pathspec);
        !          3411: 
        !          3412:   actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
        !          3413:   strendzap (actual_cwrapper_path, actual_cwrapper_name);
        !          3414: 
        !          3415:   /* wrapper name transforms */
        !          3416:   strendzap (actual_cwrapper_name, ".exe");
        !          3417:   tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
        !          3418:   XFREE (actual_cwrapper_name);
        !          3419:   actual_cwrapper_name = tmp_pathspec;
        !          3420:   tmp_pathspec = 0;
        !          3421: 
        !          3422:   /* target_name transforms -- use actual target program name; might have lt- prefix */
        !          3423:   target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
        !          3424:   strendzap (target_name, ".exe");
        !          3425:   tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
        !          3426:   XFREE (target_name);
        !          3427:   target_name = tmp_pathspec;
        !          3428:   tmp_pathspec = 0;
        !          3429: 
        !          3430:   LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
        !          3431:                          target_name));
        !          3432: EOF
        !          3433: 
        !          3434:            cat <<EOF
        !          3435:   newargz[0] =
        !          3436:     XMALLOC (char, (strlen (actual_cwrapper_path) +
        !          3437:                    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
        !          3438:   strcpy (newargz[0], actual_cwrapper_path);
        !          3439:   strcat (newargz[0], "$objdir");
        !          3440:   strcat (newargz[0], "/");
        !          3441: EOF
        !          3442: 
        !          3443:            cat <<"EOF"
        !          3444:   /* stop here, and copy so we don't have to do this twice */
        !          3445:   tmp_pathspec = xstrdup (newargz[0]);
        !          3446: 
        !          3447:   /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
        !          3448:   strcat (newargz[0], actual_cwrapper_name);
        !          3449: 
        !          3450:   /* DO want the lt- prefix here if it exists, so use target_name */
        !          3451:   lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
        !          3452:   XFREE (tmp_pathspec);
        !          3453:   tmp_pathspec = NULL;
        !          3454: EOF
        !          3455: 
        !          3456:            case $host_os in
        !          3457:              mingw*)
        !          3458:            cat <<"EOF"
        !          3459:   {
        !          3460:     char* p;
        !          3461:     while ((p = strchr (newargz[0], '\\')) != NULL)
        !          3462:       {
        !          3463:        *p = '/';
        !          3464:       }
        !          3465:     while ((p = strchr (lt_argv_zero, '\\')) != NULL)
        !          3466:       {
        !          3467:        *p = '/';
        !          3468:       }
        !          3469:   }
        !          3470: EOF
        !          3471:            ;;
        !          3472:            esac
        !          3473: 
        !          3474:            cat <<"EOF"
        !          3475:   XFREE (target_name);
        !          3476:   XFREE (actual_cwrapper_path);
        !          3477:   XFREE (actual_cwrapper_name);
        !          3478: 
        !          3479:   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
        !          3480:   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
        !          3481:   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
        !          3482:   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
        !          3483: 
        !          3484:   newargc=0;
        !          3485:   for (i = 1; i < argc; i++)
        !          3486:     {
        !          3487:       if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
        !          3488:         {
        !          3489:           if (argv[i][env_set_opt_len] == '=')
        !          3490:             {
        !          3491:               const char *p = argv[i] + env_set_opt_len + 1;
        !          3492:               lt_opt_process_env_set (p);
        !          3493:             }
        !          3494:           else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
        !          3495:             {
        !          3496:               lt_opt_process_env_set (argv[++i]); /* don't copy */
        !          3497:             }
        !          3498:           else
        !          3499:             lt_fatal ("%s missing required argument", env_set_opt);
        !          3500:           continue;
        !          3501:         }
        !          3502:       if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
        !          3503:         {
        !          3504:           if (argv[i][env_prepend_opt_len] == '=')
        !          3505:             {
        !          3506:               const char *p = argv[i] + env_prepend_opt_len + 1;
        !          3507:               lt_opt_process_env_prepend (p);
        !          3508:             }
        !          3509:           else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
        !          3510:             {
        !          3511:               lt_opt_process_env_prepend (argv[++i]); /* don't copy */
        !          3512:             }
        !          3513:           else
        !          3514:             lt_fatal ("%s missing required argument", env_prepend_opt);
        !          3515:           continue;
        !          3516:         }
        !          3517:       if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
        !          3518:         {
        !          3519:           if (argv[i][env_append_opt_len] == '=')
        !          3520:             {
        !          3521:               const char *p = argv[i] + env_append_opt_len + 1;
        !          3522:               lt_opt_process_env_append (p);
        !          3523:             }
        !          3524:           else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
        !          3525:             {
        !          3526:               lt_opt_process_env_append (argv[++i]); /* don't copy */
        !          3527:             }
        !          3528:           else
        !          3529:             lt_fatal ("%s missing required argument", env_append_opt);
        !          3530:           continue;
        !          3531:         }
        !          3532:       if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
        !          3533:         {
        !          3534:           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
        !          3535:              namespace, but it is not one of the ones we know about and
        !          3536:              have already dealt with, above (inluding dump-script), then
        !          3537:              report an error. Otherwise, targets might begin to believe
        !          3538:              they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
        !          3539:              namespace. The first time any user complains about this, we'll
        !          3540:              need to make LTWRAPPER_OPTION_PREFIX a configure-time option
        !          3541:              or a configure.ac-settable value.
        !          3542:            */
        !          3543:           lt_fatal ("Unrecognized option in %s namespace: '%s'",
        !          3544:                     ltwrapper_option_prefix, argv[i]);
        !          3545:         }
        !          3546:       /* otherwise ... */
        !          3547:       newargz[++newargc] = xstrdup (argv[i]);
        !          3548:     }
        !          3549:   newargz[++newargc] = NULL;
        !          3550: 
        !          3551:   LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
        !          3552:   for (i = 0; i < newargc; i++)
        !          3553:     {
        !          3554:       LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
        !          3555:     }
        !          3556: 
        !          3557: EOF
        !          3558: 
        !          3559:            case $host_os in
        !          3560:              mingw*)
        !          3561:                cat <<"EOF"
        !          3562:   /* execv doesn't actually work on mingw as expected on unix */
        !          3563:   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
        !          3564:   if (rval == -1)
        !          3565:     {
        !          3566:       /* failed to start process */
        !          3567:       LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
        !          3568:       return 127;
        !          3569:     }
        !          3570:   return rval;
        !          3571: EOF
        !          3572:                ;;
        !          3573:              *)
        !          3574:                cat <<"EOF"
        !          3575:   execv (lt_argv_zero, newargz);
        !          3576:   return rval; /* =127, but avoids unused variable warning */
        !          3577: EOF
        !          3578:                ;;
        !          3579:            esac
        !          3580: 
        !          3581:            cat <<"EOF"
        !          3582: }
        !          3583: 
        !          3584: void *
        !          3585: xmalloc (size_t num)
        !          3586: {
        !          3587:   void *p = (void *) malloc (num);
        !          3588:   if (!p)
        !          3589:     lt_fatal ("Memory exhausted");
        !          3590: 
        !          3591:   return p;
        !          3592: }
        !          3593: 
        !          3594: char *
        !          3595: xstrdup (const char *string)
        !          3596: {
        !          3597:   return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
        !          3598:                          string) : NULL;
        !          3599: }
        !          3600: 
        !          3601: const char *
        !          3602: base_name (const char *name)
        !          3603: {
        !          3604:   const char *base;
        !          3605: 
        !          3606: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
        !          3607:   /* Skip over the disk name in MSDOS pathnames. */
        !          3608:   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
        !          3609:     name += 2;
        !          3610: #endif
        !          3611: 
        !          3612:   for (base = name; *name; name++)
        !          3613:     if (IS_DIR_SEPARATOR (*name))
        !          3614:       base = name + 1;
        !          3615:   return base;
        !          3616: }
        !          3617: 
        !          3618: int
        !          3619: check_executable (const char *path)
        !          3620: {
        !          3621:   struct stat st;
        !          3622: 
        !          3623:   LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
        !          3624:                          path ? (*path ? path : "EMPTY!") : "NULL!"));
        !          3625:   if ((!path) || (!*path))
        !          3626:     return 0;
        !          3627: 
        !          3628:   if ((stat (path, &st) >= 0)
        !          3629:       && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
        !          3630:     return 1;
        !          3631:   else
        !          3632:     return 0;
        !          3633: }
        !          3634: 
        !          3635: int
        !          3636: make_executable (const char *path)
        !          3637: {
        !          3638:   int rval = 0;
        !          3639:   struct stat st;
        !          3640: 
        !          3641:   LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
        !          3642:                          path ? (*path ? path : "EMPTY!") : "NULL!"));
        !          3643:   if ((!path) || (!*path))
        !          3644:     return 0;
        !          3645: 
        !          3646:   if (stat (path, &st) >= 0)
        !          3647:     {
        !          3648:       rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
        !          3649:     }
        !          3650:   return rval;
        !          3651: }
        !          3652: 
        !          3653: /* Searches for the full path of the wrapper.  Returns
        !          3654:    newly allocated full path name if found, NULL otherwise
        !          3655:    Does not chase symlinks, even on platforms that support them.
        !          3656: */
        !          3657: char *
        !          3658: find_executable (const char *wrapper)
        !          3659: {
        !          3660:   int has_slash = 0;
        !          3661:   const char *p;
        !          3662:   const char *p_next;
        !          3663:   /* static buffer for getcwd */
        !          3664:   char tmp[LT_PATHMAX + 1];
        !          3665:   int tmp_len;
        !          3666:   char *concat_name;
        !          3667: 
        !          3668:   LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
        !          3669:                          wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
        !          3670: 
        !          3671:   if ((wrapper == NULL) || (*wrapper == '\0'))
        !          3672:     return NULL;
        !          3673: 
        !          3674:   /* Absolute path? */
        !          3675: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
        !          3676:   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
        !          3677:     {
        !          3678:       concat_name = xstrdup (wrapper);
        !          3679:       if (check_executable (concat_name))
        !          3680:        return concat_name;
        !          3681:       XFREE (concat_name);
        !          3682:     }
        !          3683:   else
        !          3684:     {
        !          3685: #endif
        !          3686:       if (IS_DIR_SEPARATOR (wrapper[0]))
        !          3687:        {
        !          3688:          concat_name = xstrdup (wrapper);
        !          3689:          if (check_executable (concat_name))
        !          3690:            return concat_name;
        !          3691:          XFREE (concat_name);
        !          3692:        }
        !          3693: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
        !          3694:     }
        !          3695: #endif
        !          3696: 
        !          3697:   for (p = wrapper; *p; p++)
        !          3698:     if (*p == '/')
        !          3699:       {
        !          3700:        has_slash = 1;
        !          3701:        break;
        !          3702:       }
        !          3703:   if (!has_slash)
        !          3704:     {
        !          3705:       /* no slashes; search PATH */
        !          3706:       const char *path = getenv ("PATH");
        !          3707:       if (path != NULL)
        !          3708:        {
        !          3709:          for (p = path; *p; p = p_next)
        !          3710:            {
        !          3711:              const char *q;
        !          3712:              size_t p_len;
        !          3713:              for (q = p; *q; q++)
        !          3714:                if (IS_PATH_SEPARATOR (*q))
        !          3715:                  break;
        !          3716:              p_len = q - p;
        !          3717:              p_next = (*q == '\0' ? q : q + 1);
        !          3718:              if (p_len == 0)
        !          3719:                {
        !          3720:                  /* empty path: current directory */
        !          3721:                  if (getcwd (tmp, LT_PATHMAX) == NULL)
        !          3722:                    lt_fatal ("getcwd failed");
        !          3723:                  tmp_len = strlen (tmp);
        !          3724:                  concat_name =
        !          3725:                    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
        !          3726:                  memcpy (concat_name, tmp, tmp_len);
        !          3727:                  concat_name[tmp_len] = '/';
        !          3728:                  strcpy (concat_name + tmp_len + 1, wrapper);
        !          3729:                }
        !          3730:              else
        !          3731:                {
        !          3732:                  concat_name =
        !          3733:                    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
        !          3734:                  memcpy (concat_name, p, p_len);
        !          3735:                  concat_name[p_len] = '/';
        !          3736:                  strcpy (concat_name + p_len + 1, wrapper);
        !          3737:                }
        !          3738:              if (check_executable (concat_name))
        !          3739:                return concat_name;
        !          3740:              XFREE (concat_name);
        !          3741:            }
        !          3742:        }
        !          3743:       /* not found in PATH; assume curdir */
        !          3744:     }
        !          3745:   /* Relative path | not found in path: prepend cwd */
        !          3746:   if (getcwd (tmp, LT_PATHMAX) == NULL)
        !          3747:     lt_fatal ("getcwd failed");
        !          3748:   tmp_len = strlen (tmp);
        !          3749:   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
        !          3750:   memcpy (concat_name, tmp, tmp_len);
        !          3751:   concat_name[tmp_len] = '/';
        !          3752:   strcpy (concat_name + tmp_len + 1, wrapper);
        !          3753: 
        !          3754:   if (check_executable (concat_name))
        !          3755:     return concat_name;
        !          3756:   XFREE (concat_name);
        !          3757:   return NULL;
        !          3758: }
        !          3759: 
        !          3760: char *
        !          3761: chase_symlinks (const char *pathspec)
        !          3762: {
        !          3763: #ifndef S_ISLNK
        !          3764:   return xstrdup (pathspec);
        !          3765: #else
        !          3766:   char buf[LT_PATHMAX];
        !          3767:   struct stat s;
        !          3768:   char *tmp_pathspec = xstrdup (pathspec);
        !          3769:   char *p;
        !          3770:   int has_symlinks = 0;
        !          3771:   while (strlen (tmp_pathspec) && !has_symlinks)
        !          3772:     {
        !          3773:       LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
        !          3774:                              tmp_pathspec));
        !          3775:       if (lstat (tmp_pathspec, &s) == 0)
        !          3776:        {
        !          3777:          if (S_ISLNK (s.st_mode) != 0)
        !          3778:            {
        !          3779:              has_symlinks = 1;
        !          3780:              break;
        !          3781:            }
        !          3782: 
        !          3783:          /* search backwards for last DIR_SEPARATOR */
        !          3784:          p = tmp_pathspec + strlen (tmp_pathspec) - 1;
        !          3785:          while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
        !          3786:            p--;
        !          3787:          if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
        !          3788:            {
        !          3789:              /* no more DIR_SEPARATORS left */
        !          3790:              break;
        !          3791:            }
        !          3792:          *p = '\0';
        !          3793:        }
        !          3794:       else
        !          3795:        {
        !          3796:          char *errstr = strerror (errno);
        !          3797:          lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
        !          3798:        }
        !          3799:     }
        !          3800:   XFREE (tmp_pathspec);
        !          3801: 
        !          3802:   if (!has_symlinks)
        !          3803:     {
        !          3804:       return xstrdup (pathspec);
        !          3805:     }
        !          3806: 
        !          3807:   tmp_pathspec = realpath (pathspec, buf);
        !          3808:   if (tmp_pathspec == 0)
        !          3809:     {
        !          3810:       lt_fatal ("Could not follow symlinks for %s", pathspec);
        !          3811:     }
        !          3812:   return xstrdup (tmp_pathspec);
        !          3813: #endif
        !          3814: }
        !          3815: 
        !          3816: char *
        !          3817: strendzap (char *str, const char *pat)
        !          3818: {
        !          3819:   size_t len, patlen;
        !          3820: 
        !          3821:   assert (str != NULL);
        !          3822:   assert (pat != NULL);
        !          3823: 
        !          3824:   len = strlen (str);
        !          3825:   patlen = strlen (pat);
        !          3826: 
        !          3827:   if (patlen <= len)
        !          3828:     {
        !          3829:       str += len - patlen;
        !          3830:       if (strcmp (str, pat) == 0)
        !          3831:        *str = '\0';
        !          3832:     }
        !          3833:   return str;
        !          3834: }
        !          3835: 
        !          3836: static void
        !          3837: lt_error_core (int exit_status, const char *mode,
        !          3838:               const char *message, va_list ap)
        !          3839: {
        !          3840:   fprintf (stderr, "%s: %s: ", program_name, mode);
        !          3841:   vfprintf (stderr, message, ap);
        !          3842:   fprintf (stderr, ".\n");
        !          3843: 
        !          3844:   if (exit_status >= 0)
        !          3845:     exit (exit_status);
        !          3846: }
        !          3847: 
        !          3848: void
        !          3849: lt_fatal (const char *message, ...)
        !          3850: {
        !          3851:   va_list ap;
        !          3852:   va_start (ap, message);
        !          3853:   lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
        !          3854:   va_end (ap);
        !          3855: }
        !          3856: 
        !          3857: void
        !          3858: lt_setenv (const char *name, const char *value)
        !          3859: {
        !          3860:   LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
        !          3861:                           (name ? name : "<NULL>"),
        !          3862:                           (value ? value : "<NULL>")));
        !          3863:   {
        !          3864: #ifdef HAVE_SETENV
        !          3865:     /* always make a copy, for consistency with !HAVE_SETENV */
        !          3866:     char *str = xstrdup (value);
        !          3867:     setenv (name, str, 1);
        !          3868: #else
        !          3869:     int len = strlen (name) + 1 + strlen (value) + 1;
        !          3870:     char *str = XMALLOC (char, len);
        !          3871:     sprintf (str, "%s=%s", name, value);
        !          3872:     if (putenv (str) != EXIT_SUCCESS)
        !          3873:       {
        !          3874:         XFREE (str);
        !          3875:       }
        !          3876: #endif
        !          3877:   }
        !          3878: }
        !          3879: 
        !          3880: char *
        !          3881: lt_extend_str (const char *orig_value, const char *add, int to_end)
        !          3882: {
        !          3883:   char *new_value;
        !          3884:   if (orig_value && *orig_value)
        !          3885:     {
        !          3886:       int orig_value_len = strlen (orig_value);
        !          3887:       int add_len = strlen (add);
        !          3888:       new_value = XMALLOC (char, add_len + orig_value_len + 1);
        !          3889:       if (to_end)
        !          3890:         {
        !          3891:           strcpy (new_value, orig_value);
        !          3892:           strcpy (new_value + orig_value_len, add);
        !          3893:         }
        !          3894:       else
        !          3895:         {
        !          3896:           strcpy (new_value, add);
        !          3897:           strcpy (new_value + add_len, orig_value);
        !          3898:         }
        !          3899:     }
        !          3900:   else
        !          3901:     {
        !          3902:       new_value = xstrdup (add);
        !          3903:     }
        !          3904:   return new_value;
        !          3905: }
        !          3906: 
        !          3907: int
        !          3908: lt_split_name_value (const char *arg, char** name, char** value)
        !          3909: {
        !          3910:   const char *p;
        !          3911:   int len;
        !          3912:   if (!arg || !*arg)
        !          3913:     return 1;
        !          3914: 
        !          3915:   p = strchr (arg, (int)'=');
        !          3916: 
        !          3917:   if (!p)
        !          3918:     return 1;
        !          3919: 
        !          3920:   *value = xstrdup (++p);
        !          3921: 
        !          3922:   len = strlen (arg) - strlen (*value);
        !          3923:   *name = XMALLOC (char, len);
        !          3924:   strncpy (*name, arg, len-1);
        !          3925:   (*name)[len - 1] = '\0';
        !          3926: 
        !          3927:   return 0;
        !          3928: }
        !          3929: 
        !          3930: void
        !          3931: lt_opt_process_env_set (const char *arg)
        !          3932: {
        !          3933:   char *name = NULL;
        !          3934:   char *value = NULL;
        !          3935: 
        !          3936:   if (lt_split_name_value (arg, &name, &value) != 0)
        !          3937:     {
        !          3938:       XFREE (name);
        !          3939:       XFREE (value);
        !          3940:       lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
        !          3941:     }
        !          3942: 
        !          3943:   lt_setenv (name, value);
        !          3944:   XFREE (name);
        !          3945:   XFREE (value);
        !          3946: }
        !          3947: 
        !          3948: void
        !          3949: lt_opt_process_env_prepend (const char *arg)
        !          3950: {
        !          3951:   char *name = NULL;
        !          3952:   char *value = NULL;
        !          3953:   char *new_value = NULL;
        !          3954: 
        !          3955:   if (lt_split_name_value (arg, &name, &value) != 0)
        !          3956:     {
        !          3957:       XFREE (name);
        !          3958:       XFREE (value);
        !          3959:       lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
        !          3960:     }
        !          3961: 
        !          3962:   new_value = lt_extend_str (getenv (name), value, 0);
        !          3963:   lt_setenv (name, new_value);
        !          3964:   XFREE (new_value);
        !          3965:   XFREE (name);
        !          3966:   XFREE (value);
        !          3967: }
        !          3968: 
        !          3969: void
        !          3970: lt_opt_process_env_append (const char *arg)
        !          3971: {
        !          3972:   char *name = NULL;
        !          3973:   char *value = NULL;
        !          3974:   char *new_value = NULL;
        !          3975: 
        !          3976:   if (lt_split_name_value (arg, &name, &value) != 0)
        !          3977:     {
        !          3978:       XFREE (name);
        !          3979:       XFREE (value);
        !          3980:       lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
        !          3981:     }
        !          3982: 
        !          3983:   new_value = lt_extend_str (getenv (name), value, 1);
        !          3984:   lt_setenv (name, new_value);
        !          3985:   XFREE (new_value);
        !          3986:   XFREE (name);
        !          3987:   XFREE (value);
        !          3988: }
        !          3989: 
        !          3990: void
        !          3991: lt_update_exe_path (const char *name, const char *value)
        !          3992: {
        !          3993:   LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
        !          3994:                           (name ? name : "<NULL>"),
        !          3995:                           (value ? value : "<NULL>")));
        !          3996: 
        !          3997:   if (name && *name && value && *value)
        !          3998:     {
        !          3999:       char *new_value = lt_extend_str (getenv (name), value, 0);
        !          4000:       /* some systems can't cope with a ':'-terminated path #' */
        !          4001:       int len = strlen (new_value);
        !          4002:       while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
        !          4003:         {
        !          4004:           new_value[len-1] = '\0';
        !          4005:         }
        !          4006:       lt_setenv (name, new_value);
        !          4007:       XFREE (new_value);
        !          4008:     }
        !          4009: }
        !          4010: 
        !          4011: void
        !          4012: lt_update_lib_path (const char *name, const char *value)
        !          4013: {
        !          4014:   LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
        !          4015:                           (name ? name : "<NULL>"),
        !          4016:                           (value ? value : "<NULL>")));
        !          4017: 
        !          4018:   if (name && *name && value && *value)
        !          4019:     {
        !          4020:       char *new_value = lt_extend_str (getenv (name), value, 0);
        !          4021:       lt_setenv (name, new_value);
        !          4022:       XFREE (new_value);
        !          4023:     }
        !          4024: }
        !          4025: 
        !          4026: 
        !          4027: EOF
        !          4028: }
        !          4029: # end: func_emit_cwrapperexe_src
        !          4030: 
        !          4031: # func_mode_link arg...
        !          4032: func_mode_link ()
        !          4033: {
        !          4034:     $opt_debug
        !          4035:     case $host in
        !          4036:     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
        !          4037:       # It is impossible to link a dll without this setting, and
        !          4038:       # we shouldn't force the makefile maintainer to figure out
        !          4039:       # which system we are compiling for in order to pass an extra
        !          4040:       # flag for every libtool invocation.
        !          4041:       # allow_undefined=no
        !          4042: 
        !          4043:       # FIXME: Unfortunately, there are problems with the above when trying
        !          4044:       # to make a dll which has undefined symbols, in which case not
        !          4045:       # even a static library is built.  For now, we need to specify
        !          4046:       # -no-undefined on the libtool link line when we can be certain
        !          4047:       # that all symbols are satisfied, otherwise we get a static library.
        !          4048:       allow_undefined=yes
        !          4049:       ;;
        !          4050:     *)
        !          4051:       allow_undefined=yes
        !          4052:       ;;
        !          4053:     esac
        !          4054:     libtool_args=$nonopt
        !          4055:     base_compile="$nonopt $@"
        !          4056:     compile_command=$nonopt
        !          4057:     finalize_command=$nonopt
        !          4058: 
        !          4059:     compile_rpath=
        !          4060:     finalize_rpath=
        !          4061:     compile_shlibpath=
        !          4062:     finalize_shlibpath=
        !          4063:     convenience=
        !          4064:     old_convenience=
        !          4065:     deplibs=
        !          4066:     old_deplibs=
        !          4067:     compiler_flags=
        !          4068:     linker_flags=
        !          4069:     dllsearchpath=
        !          4070:     lib_search_path=`pwd`
        !          4071:     inst_prefix_dir=
        !          4072:     new_inherited_linker_flags=
        !          4073: 
        !          4074:     avoid_version=no
        !          4075:     dlfiles=
        !          4076:     dlprefiles=
        !          4077:     dlself=no
        !          4078:     export_dynamic=no
        !          4079:     export_symbols=
        !          4080:     export_symbols_regex=
        !          4081:     generated=
        !          4082:     libobjs=
        !          4083:     ltlibs=
        !          4084:     module=no
        !          4085:     no_install=no
        !          4086:     objs=
        !          4087:     non_pic_objects=
        !          4088:     precious_files_regex=
        !          4089:     prefer_static_libs=no
        !          4090:     preload=no
        !          4091:     prev=
        !          4092:     prevarg=
        !          4093:     release=
        !          4094:     rpath=
        !          4095:     xrpath=
        !          4096:     perm_rpath=
        !          4097:     temp_rpath=
        !          4098:     thread_safe=no
        !          4099:     vinfo=
        !          4100:     vinfo_number=no
        !          4101:     weak_libs=
        !          4102:     single_module="${wl}-single_module"
        !          4103:     func_infer_tag $base_compile
        !          4104: 
        !          4105:     # We need to know -static, to get the right output filenames.
        !          4106:     for arg
        !          4107:     do
        !          4108:       case $arg in
        !          4109:       -shared)
        !          4110:        test "$build_libtool_libs" != yes && \
        !          4111:          func_fatal_configuration "can not build a shared library"
        !          4112:        build_old_libs=no
        !          4113:        break
        !          4114:        ;;
        !          4115:       -all-static | -static | -static-libtool-libs)
        !          4116:        case $arg in
        !          4117:        -all-static)
        !          4118:          if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
        !          4119:            func_warning "complete static linking is impossible in this configuration"
        !          4120:          fi
        !          4121:          if test -n "$link_static_flag"; then
        !          4122:            dlopen_self=$dlopen_self_static
        !          4123:          fi
        !          4124:          prefer_static_libs=yes
        !          4125:          ;;
        !          4126:        -static)
        !          4127:          if test -z "$pic_flag" && test -n "$link_static_flag"; then
        !          4128:            dlopen_self=$dlopen_self_static
        !          4129:          fi
        !          4130:          prefer_static_libs=built
        !          4131:          ;;
        !          4132:        -static-libtool-libs)
        !          4133:          if test -z "$pic_flag" && test -n "$link_static_flag"; then
        !          4134:            dlopen_self=$dlopen_self_static
        !          4135:          fi
        !          4136:          prefer_static_libs=yes
        !          4137:          ;;
        !          4138:        esac
        !          4139:        build_libtool_libs=no
        !          4140:        build_old_libs=yes
        !          4141:        break
        !          4142:        ;;
        !          4143:       esac
        !          4144:     done
        !          4145: 
        !          4146:     # See if our shared archives depend on static archives.
        !          4147:     test -n "$old_archive_from_new_cmds" && build_old_libs=yes
        !          4148: 
        !          4149:     # Go through the arguments, transforming them on the way.
        !          4150:     while test "$#" -gt 0; do
        !          4151:       arg="$1"
        !          4152:       shift
        !          4153:       func_quote_for_eval "$arg"
        !          4154:       qarg=$func_quote_for_eval_unquoted_result
        !          4155:       func_append libtool_args " $func_quote_for_eval_result"
        !          4156: 
        !          4157:       # If the previous option needs an argument, assign it.
        !          4158:       if test -n "$prev"; then
        !          4159:        case $prev in
        !          4160:        output)
        !          4161:          func_append compile_command " @OUTPUT@"
        !          4162:          func_append finalize_command " @OUTPUT@"
        !          4163:          ;;
        !          4164:        esac
        !          4165: 
        !          4166:        case $prev in
        !          4167:        dlfiles|dlprefiles)
        !          4168:          if test "$preload" = no; then
        !          4169:            # Add the symbol object into the linking commands.
        !          4170:            func_append compile_command " @SYMFILE@"
        !          4171:            func_append finalize_command " @SYMFILE@"
        !          4172:            preload=yes
        !          4173:          fi
        !          4174:          case $arg in
        !          4175:          *.la | *.lo) ;;  # We handle these cases below.
        !          4176:          force)
        !          4177:            if test "$dlself" = no; then
        !          4178:              dlself=needless
        !          4179:              export_dynamic=yes
        !          4180:            fi
        !          4181:            prev=
        !          4182:            continue
        !          4183:            ;;
        !          4184:          self)
        !          4185:            if test "$prev" = dlprefiles; then
        !          4186:              dlself=yes
        !          4187:            elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
        !          4188:              dlself=yes
        !          4189:            else
        !          4190:              dlself=needless
        !          4191:              export_dynamic=yes
        !          4192:            fi
        !          4193:            prev=
        !          4194:            continue
        !          4195:            ;;
        !          4196:          *)
        !          4197:            if test "$prev" = dlfiles; then
        !          4198:              dlfiles="$dlfiles $arg"
        !          4199:            else
        !          4200:              dlprefiles="$dlprefiles $arg"
        !          4201:            fi
        !          4202:            prev=
        !          4203:            continue
        !          4204:            ;;
        !          4205:          esac
        !          4206:          ;;
        !          4207:        expsyms)
        !          4208:          export_symbols="$arg"
        !          4209:          test -f "$arg" \
        !          4210:            || func_fatal_error "symbol file \`$arg' does not exist"
        !          4211:          prev=
        !          4212:          continue
        !          4213:          ;;
        !          4214:        expsyms_regex)
        !          4215:          export_symbols_regex="$arg"
        !          4216:          prev=
        !          4217:          continue
        !          4218:          ;;
        !          4219:        framework)
        !          4220:          case $host in
        !          4221:            *-*-darwin*)
        !          4222:              case "$deplibs " in
        !          4223:                *" $qarg.ltframework "*) ;;
        !          4224:                *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
        !          4225:                   ;;
        !          4226:              esac
        !          4227:              ;;
        !          4228:          esac
        !          4229:          prev=
        !          4230:          continue
        !          4231:          ;;
        !          4232:        inst_prefix)
        !          4233:          inst_prefix_dir="$arg"
        !          4234:          prev=
        !          4235:          continue
        !          4236:          ;;
        !          4237:        objectlist)
        !          4238:          if test -f "$arg"; then
        !          4239:            save_arg=$arg
        !          4240:            moreargs=
        !          4241:            for fil in `cat "$save_arg"`
        !          4242:            do
        !          4243: #            moreargs="$moreargs $fil"
        !          4244:              arg=$fil
        !          4245:              # A libtool-controlled object.
        !          4246: 
        !          4247:              # Check to see that this really is a libtool object.
        !          4248:              if func_lalib_unsafe_p "$arg"; then
        !          4249:                pic_object=
        !          4250:                non_pic_object=
        !          4251: 
        !          4252:                # Read the .lo file
        !          4253:                func_source "$arg"
        !          4254: 
        !          4255:                if test -z "$pic_object" ||
        !          4256:                   test -z "$non_pic_object" ||
        !          4257:                   test "$pic_object" = none &&
        !          4258:                   test "$non_pic_object" = none; then
        !          4259:                  func_fatal_error "cannot find name of object for \`$arg'"
        !          4260:                fi
        !          4261: 
        !          4262:                # Extract subdirectory from the argument.
        !          4263:                func_dirname "$arg" "/" ""
        !          4264:                xdir="$func_dirname_result"
        !          4265: 
        !          4266:                if test "$pic_object" != none; then
        !          4267:                  # Prepend the subdirectory the object is found in.
        !          4268:                  pic_object="$xdir$pic_object"
        !          4269: 
        !          4270:                  if test "$prev" = dlfiles; then
        !          4271:                    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
        !          4272:                      dlfiles="$dlfiles $pic_object"
        !          4273:                      prev=
        !          4274:                      continue
        !          4275:                    else
        !          4276:                      # If libtool objects are unsupported, then we need to preload.
        !          4277:                      prev=dlprefiles
        !          4278:                    fi
        !          4279:                  fi
        !          4280: 
        !          4281:                  # CHECK ME:  I think I busted this.  -Ossama
        !          4282:                  if test "$prev" = dlprefiles; then
        !          4283:                    # Preload the old-style object.
        !          4284:                    dlprefiles="$dlprefiles $pic_object"
        !          4285:                    prev=
        !          4286:                  fi
        !          4287: 
        !          4288:                  # A PIC object.
        !          4289:                  func_append libobjs " $pic_object"
        !          4290:                  arg="$pic_object"
        !          4291:                fi
        !          4292: 
        !          4293:                # Non-PIC object.
        !          4294:                if test "$non_pic_object" != none; then
        !          4295:                  # Prepend the subdirectory the object is found in.
        !          4296:                  non_pic_object="$xdir$non_pic_object"
        !          4297: 
        !          4298:                  # A standard non-PIC object
        !          4299:                  func_append non_pic_objects " $non_pic_object"
        !          4300:                  if test -z "$pic_object" || test "$pic_object" = none ; then
        !          4301:                    arg="$non_pic_object"
        !          4302:                  fi
        !          4303:                else
        !          4304:                  # If the PIC object exists, use it instead.
        !          4305:                  # $xdir was prepended to $pic_object above.
        !          4306:                  non_pic_object="$pic_object"
        !          4307:                  func_append non_pic_objects " $non_pic_object"
        !          4308:                fi
        !          4309:              else
        !          4310:                # Only an error if not doing a dry-run.
        !          4311:                if $opt_dry_run; then
        !          4312:                  # Extract subdirectory from the argument.
        !          4313:                  func_dirname "$arg" "/" ""
        !          4314:                  xdir="$func_dirname_result"
        !          4315: 
        !          4316:                  func_lo2o "$arg"
        !          4317:                  pic_object=$xdir$objdir/$func_lo2o_result
        !          4318:                  non_pic_object=$xdir$func_lo2o_result
        !          4319:                  func_append libobjs " $pic_object"
        !          4320:                  func_append non_pic_objects " $non_pic_object"
        !          4321:                else
        !          4322:                  func_fatal_error "\`$arg' is not a valid libtool object"
        !          4323:                fi
        !          4324:              fi
        !          4325:            done
        !          4326:          else
        !          4327:            func_fatal_error "link input file \`$arg' does not exist"
        !          4328:          fi
        !          4329:          arg=$save_arg
        !          4330:          prev=
        !          4331:          continue
        !          4332:          ;;
        !          4333:        precious_regex)
        !          4334:          precious_files_regex="$arg"
        !          4335:          prev=
        !          4336:          continue
        !          4337:          ;;
        !          4338:        release)
        !          4339:          release="-$arg"
        !          4340:          prev=
        !          4341:          continue
        !          4342:          ;;
        !          4343:        rpath | xrpath)
        !          4344:          # We need an absolute path.
        !          4345:          case $arg in
        !          4346:          [\\/]* | [A-Za-z]:[\\/]*) ;;
        !          4347:          *)
        !          4348:            func_fatal_error "only absolute run-paths are allowed"
        !          4349:            ;;
        !          4350:          esac
        !          4351:          if test "$prev" = rpath; then
        !          4352:            case "$rpath " in
        !          4353:            *" $arg "*) ;;
        !          4354:            *) rpath="$rpath $arg" ;;
        !          4355:            esac
        !          4356:          else
        !          4357:            case "$xrpath " in
        !          4358:            *" $arg "*) ;;
        !          4359:            *) xrpath="$xrpath $arg" ;;
        !          4360:            esac
        !          4361:          fi
        !          4362:          prev=
        !          4363:          continue
        !          4364:          ;;
        !          4365:        shrext)
        !          4366:          shrext_cmds="$arg"
        !          4367:          prev=
        !          4368:          continue
        !          4369:          ;;
        !          4370:        weak)
        !          4371:          weak_libs="$weak_libs $arg"
        !          4372:          prev=
        !          4373:          continue
        !          4374:          ;;
        !          4375:        xcclinker)
        !          4376:          linker_flags="$linker_flags $qarg"
        !          4377:          compiler_flags="$compiler_flags $qarg"
        !          4378:          prev=
        !          4379:          func_append compile_command " $qarg"
        !          4380:          func_append finalize_command " $qarg"
        !          4381:          continue
        !          4382:          ;;
        !          4383:        xcompiler)
        !          4384:          compiler_flags="$compiler_flags $qarg"
        !          4385:          prev=
        !          4386:          func_append compile_command " $qarg"
        !          4387:          func_append finalize_command " $qarg"
        !          4388:          continue
        !          4389:          ;;
        !          4390:        xlinker)
        !          4391:          linker_flags="$linker_flags $qarg"
        !          4392:          compiler_flags="$compiler_flags $wl$qarg"
        !          4393:          prev=
        !          4394:          func_append compile_command " $wl$qarg"
        !          4395:          func_append finalize_command " $wl$qarg"
        !          4396:          continue
        !          4397:          ;;
        !          4398:        *)
        !          4399:          eval "$prev=\"\$arg\""
        !          4400:          prev=
        !          4401:          continue
        !          4402:          ;;
        !          4403:        esac
        !          4404:       fi # test -n "$prev"
        !          4405: 
        !          4406:       prevarg="$arg"
        !          4407: 
        !          4408:       case $arg in
        !          4409:       -all-static)
        !          4410:        if test -n "$link_static_flag"; then
        !          4411:          # See comment for -static flag below, for more details.
        !          4412:          func_append compile_command " $link_static_flag"
        !          4413:          func_append finalize_command " $link_static_flag"
        !          4414:        fi
        !          4415:        continue
        !          4416:        ;;
        !          4417: 
        !          4418:       -allow-undefined)
        !          4419:        # FIXME: remove this flag sometime in the future.
        !          4420:        func_fatal_error "\`-allow-undefined' must not be used because it is the default"
        !          4421:        ;;
        !          4422: 
        !          4423:       -avoid-version)
        !          4424:        avoid_version=yes
        !          4425:        continue
        !          4426:        ;;
        !          4427: 
        !          4428:       -dlopen)
        !          4429:        prev=dlfiles
        !          4430:        continue
        !          4431:        ;;
        !          4432: 
        !          4433:       -dlpreopen)
        !          4434:        prev=dlprefiles
        !          4435:        continue
        !          4436:        ;;
        !          4437: 
        !          4438:       -export-dynamic)
        !          4439:        export_dynamic=yes
        !          4440:        continue
        !          4441:        ;;
        !          4442: 
        !          4443:       -export-symbols | -export-symbols-regex)
        !          4444:        if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
        !          4445:          func_fatal_error "more than one -exported-symbols argument is not allowed"
        !          4446:        fi
        !          4447:        if test "X$arg" = "X-export-symbols"; then
        !          4448:          prev=expsyms
        !          4449:        else
        !          4450:          prev=expsyms_regex
        !          4451:        fi
        !          4452:        continue
        !          4453:        ;;
        !          4454: 
        !          4455:       -framework)
        !          4456:        prev=framework
        !          4457:        continue
        !          4458:        ;;
        !          4459: 
        !          4460:       -inst-prefix-dir)
        !          4461:        prev=inst_prefix
        !          4462:        continue
        !          4463:        ;;
        !          4464: 
        !          4465:       # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
        !          4466:       # so, if we see these flags be careful not to treat them like -L
        !          4467:       -L[A-Z][A-Z]*:*)
        !          4468:        case $with_gcc/$host in
        !          4469:        no/*-*-irix* | /*-*-irix*)
        !          4470:          func_append compile_command " $arg"
        !          4471:          func_append finalize_command " $arg"
        !          4472:          ;;
        !          4473:        esac
        !          4474:        continue
        !          4475:        ;;
        !          4476: 
        !          4477:       -L*)
        !          4478:        func_stripname '-L' '' "$arg"
        !          4479:        dir=$func_stripname_result
        !          4480:        if test -z "$dir"; then
        !          4481:          if test "$#" -gt 0; then
        !          4482:            func_fatal_error "require no space between \`-L' and \`$1'"
        !          4483:          else
        !          4484:            func_fatal_error "need path for \`-L' option"
        !          4485:          fi
        !          4486:        fi
        !          4487:        # We need an absolute path.
        !          4488:        case $dir in
        !          4489:        [\\/]* | [A-Za-z]:[\\/]*) ;;
        !          4490:        *)
        !          4491:          absdir=`cd "$dir" && pwd`
        !          4492:          test -z "$absdir" && \
        !          4493:            func_fatal_error "cannot determine absolute directory name of \`$dir'"
        !          4494:          dir="$absdir"
        !          4495:          ;;
        !          4496:        esac
        !          4497:        case "$deplibs " in
        !          4498:        *" -L$dir "*) ;;
        !          4499:        *)
        !          4500:          deplibs="$deplibs -L$dir"
        !          4501:          lib_search_path="$lib_search_path $dir"
        !          4502:          ;;
        !          4503:        esac
        !          4504:        case $host in
        !          4505:        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
        !          4506:          testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
        !          4507:          case :$dllsearchpath: in
        !          4508:          *":$dir:"*) ;;
        !          4509:          ::) dllsearchpath=$dir;;
        !          4510:          *) dllsearchpath="$dllsearchpath:$dir";;
        !          4511:          esac
        !          4512:          case :$dllsearchpath: in
        !          4513:          *":$testbindir:"*) ;;
        !          4514:          ::) dllsearchpath=$testbindir;;
        !          4515:          *) dllsearchpath="$dllsearchpath:$testbindir";;
        !          4516:          esac
        !          4517:          ;;
        !          4518:        esac
        !          4519:        continue
        !          4520:        ;;
        !          4521: 
        !          4522:       -l*)
        !          4523:        if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
        !          4524:          case $host in
        !          4525:          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
        !          4526:            # These systems don't actually have a C or math library (as such)
        !          4527:            continue
        !          4528:            ;;
        !          4529:          *-*-os2*)
        !          4530:            # These systems don't actually have a C library (as such)
        !          4531:            test "X$arg" = "X-lc" && continue
        !          4532:            ;;
        !          4533:          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
        !          4534:            # Do not include libc due to us having libc/libc_r.
        !          4535:            test "X$arg" = "X-lc" && continue
        !          4536:            ;;
        !          4537:          *-*-rhapsody* | *-*-darwin1.[012])
        !          4538:            # Rhapsody C and math libraries are in the System framework
        !          4539:            deplibs="$deplibs System.ltframework"
        !          4540:            continue
        !          4541:            ;;
        !          4542:          *-*-sco3.2v5* | *-*-sco5v6*)
        !          4543:            # Causes problems with __ctype
        !          4544:            test "X$arg" = "X-lc" && continue
        !          4545:            ;;
        !          4546:          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
        !          4547:            # Compiler inserts libc in the correct place for threads to work
        !          4548:            test "X$arg" = "X-lc" && continue
        !          4549:            ;;
        !          4550:          esac
        !          4551:        elif test "X$arg" = "X-lc_r"; then
        !          4552:         case $host in
        !          4553:         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
        !          4554:           # Do not include libc_r directly, use -pthread flag.
        !          4555:           continue
        !          4556:           ;;
        !          4557:         esac
        !          4558:        fi
        !          4559:        deplibs="$deplibs $arg"
        !          4560:        continue
        !          4561:        ;;
        !          4562: 
        !          4563:       -module)
        !          4564:        module=yes
        !          4565:        continue
        !          4566:        ;;
        !          4567: 
        !          4568:       # Tru64 UNIX uses -model [arg] to determine the layout of C++
        !          4569:       # classes, name mangling, and exception handling.
        !          4570:       # Darwin uses the -arch flag to determine output architecture.
        !          4571:       -model|-arch|-isysroot)
        !          4572:        compiler_flags="$compiler_flags $arg"
        !          4573:        func_append compile_command " $arg"
        !          4574:        func_append finalize_command " $arg"
        !          4575:        prev=xcompiler
        !          4576:        continue
        !          4577:        ;;
        !          4578: 
        !          4579:       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
        !          4580:        compiler_flags="$compiler_flags $arg"
        !          4581:        func_append compile_command " $arg"
        !          4582:        func_append finalize_command " $arg"
        !          4583:        case "$new_inherited_linker_flags " in
        !          4584:            *" $arg "*) ;;
        !          4585:            * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
        !          4586:        esac
        !          4587:        continue
        !          4588:        ;;
        !          4589: 
        !          4590:       -multi_module)
        !          4591:        single_module="${wl}-multi_module"
        !          4592:        continue
        !          4593:        ;;
        !          4594: 
        !          4595:       -no-fast-install)
        !          4596:        fast_install=no
        !          4597:        continue
        !          4598:        ;;
        !          4599: 
        !          4600:       -no-install)
        !          4601:        case $host in
        !          4602:        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
        !          4603:          # The PATH hackery in wrapper scripts is required on Windows
        !          4604:          # and Darwin in order for the loader to find any dlls it needs.
        !          4605:          func_warning "\`-no-install' is ignored for $host"
        !          4606:          func_warning "assuming \`-no-fast-install' instead"
        !          4607:          fast_install=no
        !          4608:          ;;
        !          4609:        *) no_install=yes ;;
        !          4610:        esac
        !          4611:        continue
        !          4612:        ;;
        !          4613: 
        !          4614:       -no-undefined)
        !          4615:        allow_undefined=no
        !          4616:        continue
        !          4617:        ;;
        !          4618: 
        !          4619:       -objectlist)
        !          4620:        prev=objectlist
        !          4621:        continue
        !          4622:        ;;
        !          4623: 
        !          4624:       -o) prev=output ;;
        !          4625: 
        !          4626:       -precious-files-regex)
        !          4627:        prev=precious_regex
        !          4628:        continue
        !          4629:        ;;
        !          4630: 
        !          4631:       -release)
        !          4632:        prev=release
        !          4633:        continue
        !          4634:        ;;
        !          4635: 
        !          4636:       -rpath)
        !          4637:        prev=rpath
        !          4638:        continue
        !          4639:        ;;
        !          4640: 
        !          4641:       -R)
        !          4642:        prev=xrpath
        !          4643:        continue
        !          4644:        ;;
        !          4645: 
        !          4646:       -R*)
        !          4647:        func_stripname '-R' '' "$arg"
        !          4648:        dir=$func_stripname_result
        !          4649:        # We need an absolute path.
        !          4650:        case $dir in
        !          4651:        [\\/]* | [A-Za-z]:[\\/]*) ;;
        !          4652:        *)
        !          4653:          func_fatal_error "only absolute run-paths are allowed"
        !          4654:          ;;
        !          4655:        esac
        !          4656:        case "$xrpath " in
        !          4657:        *" $dir "*) ;;
        !          4658:        *) xrpath="$xrpath $dir" ;;
        !          4659:        esac
        !          4660:        continue
        !          4661:        ;;
        !          4662: 
        !          4663:       -shared)
        !          4664:        # The effects of -shared are defined in a previous loop.
        !          4665:        continue
        !          4666:        ;;
        !          4667: 
        !          4668:       -shrext)
        !          4669:        prev=shrext
        !          4670:        continue
        !          4671:        ;;
        !          4672: 
        !          4673:       -static | -static-libtool-libs)
        !          4674:        # The effects of -static are defined in a previous loop.
        !          4675:        # We used to do the same as -all-static on platforms that
        !          4676:        # didn't have a PIC flag, but the assumption that the effects
        !          4677:        # would be equivalent was wrong.  It would break on at least
        !          4678:        # Digital Unix and AIX.
        !          4679:        continue
        !          4680:        ;;
        !          4681: 
        !          4682:       -thread-safe)
        !          4683:        thread_safe=yes
        !          4684:        continue
        !          4685:        ;;
        !          4686: 
        !          4687:       -version-info)
        !          4688:        prev=vinfo
        !          4689:        continue
        !          4690:        ;;
        !          4691: 
        !          4692:       -version-number)
        !          4693:        prev=vinfo
        !          4694:        vinfo_number=yes
        !          4695:        continue
        !          4696:        ;;
        !          4697: 
        !          4698:       -weak)
        !          4699:         prev=weak
        !          4700:        continue
        !          4701:        ;;
        !          4702: 
        !          4703:       -Wc,*)
        !          4704:        func_stripname '-Wc,' '' "$arg"
        !          4705:        args=$func_stripname_result
        !          4706:        arg=
        !          4707:        save_ifs="$IFS"; IFS=','
        !          4708:        for flag in $args; do
        !          4709:          IFS="$save_ifs"
        !          4710:           func_quote_for_eval "$flag"
        !          4711:          arg="$arg $wl$func_quote_for_eval_result"
        !          4712:          compiler_flags="$compiler_flags $func_quote_for_eval_result"
        !          4713:        done
        !          4714:        IFS="$save_ifs"
        !          4715:        func_stripname ' ' '' "$arg"
        !          4716:        arg=$func_stripname_result
        !          4717:        ;;
        !          4718: 
        !          4719:       -Wl,*)
        !          4720:        func_stripname '-Wl,' '' "$arg"
        !          4721:        args=$func_stripname_result
        !          4722:        arg=
        !          4723:        save_ifs="$IFS"; IFS=','
        !          4724:        for flag in $args; do
        !          4725:          IFS="$save_ifs"
        !          4726:           func_quote_for_eval "$flag"
        !          4727:          arg="$arg $wl$func_quote_for_eval_result"
        !          4728:          compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
        !          4729:          linker_flags="$linker_flags $func_quote_for_eval_result"
        !          4730:        done
        !          4731:        IFS="$save_ifs"
        !          4732:        func_stripname ' ' '' "$arg"
        !          4733:        arg=$func_stripname_result
        !          4734:        ;;
        !          4735: 
        !          4736:       -Xcompiler)
        !          4737:        prev=xcompiler
        !          4738:        continue
        !          4739:        ;;
        !          4740: 
        !          4741:       -Xlinker)
        !          4742:        prev=xlinker
        !          4743:        continue
        !          4744:        ;;
        !          4745: 
        !          4746:       -XCClinker)
        !          4747:        prev=xcclinker
        !          4748:        continue
        !          4749:        ;;
        !          4750: 
        !          4751:       # -msg_* for osf cc
        !          4752:       -msg_*)
        !          4753:        func_quote_for_eval "$arg"
        !          4754:        arg="$func_quote_for_eval_result"
        !          4755:        ;;
        !          4756: 
        !          4757:       # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
        !          4758:       # -r[0-9][0-9]* specifies the processor on the SGI compiler
        !          4759:       # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
        !          4760:       # +DA*, +DD* enable 64-bit mode on the HP compiler
        !          4761:       # -q* pass through compiler args for the IBM compiler
        !          4762:       # -m*, -t[45]*, -txscale* pass through architecture-specific
        !          4763:       # compiler args for GCC
        !          4764:       # -F/path gives path to uninstalled frameworks, gcc on darwin
        !          4765:       # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
        !          4766:       # @file GCC response files
        !          4767:       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
        !          4768:       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
        !          4769:         func_quote_for_eval "$arg"
        !          4770:        arg="$func_quote_for_eval_result"
        !          4771:         func_append compile_command " $arg"
        !          4772:         func_append finalize_command " $arg"
        !          4773:         compiler_flags="$compiler_flags $arg"
        !          4774:         continue
        !          4775:         ;;
        !          4776: 
        !          4777:       # Some other compiler flag.
        !          4778:       -* | +*)
        !          4779:         func_quote_for_eval "$arg"
        !          4780:        arg="$func_quote_for_eval_result"
        !          4781:        ;;
        !          4782: 
        !          4783:       *.$objext)
        !          4784:        # A standard object.
        !          4785:        objs="$objs $arg"
        !          4786:        ;;
        !          4787: 
        !          4788:       *.lo)
        !          4789:        # A libtool-controlled object.
        !          4790: 
        !          4791:        # Check to see that this really is a libtool object.
        !          4792:        if func_lalib_unsafe_p "$arg"; then
        !          4793:          pic_object=
        !          4794:          non_pic_object=
        !          4795: 
        !          4796:          # Read the .lo file
        !          4797:          func_source "$arg"
        !          4798: 
        !          4799:          if test -z "$pic_object" ||
        !          4800:             test -z "$non_pic_object" ||
        !          4801:             test "$pic_object" = none &&
        !          4802:             test "$non_pic_object" = none; then
        !          4803:            func_fatal_error "cannot find name of object for \`$arg'"
        !          4804:          fi
        !          4805: 
        !          4806:          # Extract subdirectory from the argument.
        !          4807:          func_dirname "$arg" "/" ""
        !          4808:          xdir="$func_dirname_result"
        !          4809: 
        !          4810:          if test "$pic_object" != none; then
        !          4811:            # Prepend the subdirectory the object is found in.
        !          4812:            pic_object="$xdir$pic_object"
        !          4813: 
        !          4814:            if test "$prev" = dlfiles; then
        !          4815:              if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
        !          4816:                dlfiles="$dlfiles $pic_object"
        !          4817:                prev=
        !          4818:                continue
        !          4819:              else
        !          4820:                # If libtool objects are unsupported, then we need to preload.
        !          4821:                prev=dlprefiles
        !          4822:              fi
        !          4823:            fi
        !          4824: 
        !          4825:            # CHECK ME:  I think I busted this.  -Ossama
        !          4826:            if test "$prev" = dlprefiles; then
        !          4827:              # Preload the old-style object.
        !          4828:              dlprefiles="$dlprefiles $pic_object"
        !          4829:              prev=
        !          4830:            fi
        !          4831: 
        !          4832:            # A PIC object.
        !          4833:            func_append libobjs " $pic_object"
        !          4834:            arg="$pic_object"
        !          4835:          fi
        !          4836: 
        !          4837:          # Non-PIC object.
        !          4838:          if test "$non_pic_object" != none; then
        !          4839:            # Prepend the subdirectory the object is found in.
        !          4840:            non_pic_object="$xdir$non_pic_object"
        !          4841: 
        !          4842:            # A standard non-PIC object
        !          4843:            func_append non_pic_objects " $non_pic_object"
        !          4844:            if test -z "$pic_object" || test "$pic_object" = none ; then
        !          4845:              arg="$non_pic_object"
        !          4846:            fi
        !          4847:          else
        !          4848:            # If the PIC object exists, use it instead.
        !          4849:            # $xdir was prepended to $pic_object above.
        !          4850:            non_pic_object="$pic_object"
        !          4851:            func_append non_pic_objects " $non_pic_object"
        !          4852:          fi
        !          4853:        else
        !          4854:          # Only an error if not doing a dry-run.
        !          4855:          if $opt_dry_run; then
        !          4856:            # Extract subdirectory from the argument.
        !          4857:            func_dirname "$arg" "/" ""
        !          4858:            xdir="$func_dirname_result"
        !          4859: 
        !          4860:            func_lo2o "$arg"
        !          4861:            pic_object=$xdir$objdir/$func_lo2o_result
        !          4862:            non_pic_object=$xdir$func_lo2o_result
        !          4863:            func_append libobjs " $pic_object"
        !          4864:            func_append non_pic_objects " $non_pic_object"
        !          4865:          else
        !          4866:            func_fatal_error "\`$arg' is not a valid libtool object"
        !          4867:          fi
        !          4868:        fi
        !          4869:        ;;
        !          4870: 
        !          4871:       *.$libext)
        !          4872:        # An archive.
        !          4873:        deplibs="$deplibs $arg"
        !          4874:        old_deplibs="$old_deplibs $arg"
        !          4875:        continue
        !          4876:        ;;
        !          4877: 
        !          4878:       *.la)
        !          4879:        # A libtool-controlled library.
        !          4880: 
        !          4881:        if test "$prev" = dlfiles; then
        !          4882:          # This library was specified with -dlopen.
        !          4883:          dlfiles="$dlfiles $arg"
        !          4884:          prev=
        !          4885:        elif test "$prev" = dlprefiles; then
        !          4886:          # The library was specified with -dlpreopen.
        !          4887:          dlprefiles="$dlprefiles $arg"
        !          4888:          prev=
        !          4889:        else
        !          4890:          deplibs="$deplibs $arg"
        !          4891:        fi
        !          4892:        continue
        !          4893:        ;;
        !          4894: 
        !          4895:       # Some other compiler argument.
        !          4896:       *)
        !          4897:        # Unknown arguments in both finalize_command and compile_command need
        !          4898:        # to be aesthetically quoted because they are evaled later.
        !          4899:        func_quote_for_eval "$arg"
        !          4900:        arg="$func_quote_for_eval_result"
        !          4901:        ;;
        !          4902:       esac # arg
        !          4903: 
        !          4904:       # Now actually substitute the argument into the commands.
        !          4905:       if test -n "$arg"; then
        !          4906:        func_append compile_command " $arg"
        !          4907:        func_append finalize_command " $arg"
        !          4908:       fi
        !          4909:     done # argument parsing loop
        !          4910: 
        !          4911:     test -n "$prev" && \
        !          4912:       func_fatal_help "the \`$prevarg' option requires an argument"
        !          4913: 
        !          4914:     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
        !          4915:       eval arg=\"$export_dynamic_flag_spec\"
        !          4916:       func_append compile_command " $arg"
        !          4917:       func_append finalize_command " $arg"
        !          4918:     fi
        !          4919: 
        !          4920:     oldlibs=
        !          4921:     # calculate the name of the file, without its directory
        !          4922:     func_basename "$output"
        !          4923:     outputname="$func_basename_result"
        !          4924:     libobjs_save="$libobjs"
        !          4925: 
        !          4926:     if test -n "$shlibpath_var"; then
        !          4927:       # get the directories listed in $shlibpath_var
        !          4928:       eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
        !          4929:     else
        !          4930:       shlib_search_path=
        !          4931:     fi
        !          4932:     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
        !          4933:     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
        !          4934: 
        !          4935:     func_dirname "$output" "/" ""
        !          4936:     output_objdir="$func_dirname_result$objdir"
        !          4937:     # Create the object directory.
        !          4938:     func_mkdir_p "$output_objdir"
        !          4939: 
        !          4940:     # Determine the type of output
        !          4941:     case $output in
        !          4942:     "")
        !          4943:       func_fatal_help "you must specify an output file"
        !          4944:       ;;
        !          4945:     *.$libext) linkmode=oldlib ;;
        !          4946:     *.lo | *.$objext) linkmode=obj ;;
        !          4947:     *.la) linkmode=lib ;;
        !          4948:     *) linkmode=prog ;; # Anything else should be a program.
        !          4949:     esac
        !          4950: 
        !          4951:     specialdeplibs=
        !          4952: 
        !          4953:     libs=
        !          4954:     # Find all interdependent deplibs by searching for libraries
        !          4955:     # that are linked more than once (e.g. -la -lb -la)
        !          4956:     for deplib in $deplibs; do
        !          4957:       if $opt_duplicate_deps ; then
        !          4958:        case "$libs " in
        !          4959:        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
        !          4960:        esac
        !          4961:       fi
        !          4962:       libs="$libs $deplib"
        !          4963:     done
        !          4964: 
        !          4965:     if test "$linkmode" = lib; then
        !          4966:       libs="$predeps $libs $compiler_lib_search_path $postdeps"
        !          4967: 
        !          4968:       # Compute libraries that are listed more than once in $predeps
        !          4969:       # $postdeps and mark them as special (i.e., whose duplicates are
        !          4970:       # not to be eliminated).
        !          4971:       pre_post_deps=
        !          4972:       if $opt_duplicate_compiler_generated_deps; then
        !          4973:        for pre_post_dep in $predeps $postdeps; do
        !          4974:          case "$pre_post_deps " in
        !          4975:          *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
        !          4976:          esac
        !          4977:          pre_post_deps="$pre_post_deps $pre_post_dep"
        !          4978:        done
        !          4979:       fi
        !          4980:       pre_post_deps=
        !          4981:     fi
        !          4982: 
        !          4983:     deplibs=
        !          4984:     newdependency_libs=
        !          4985:     newlib_search_path=
        !          4986:     need_relink=no # whether we're linking any uninstalled libtool libraries
        !          4987:     notinst_deplibs= # not-installed libtool libraries
        !          4988:     notinst_path= # paths that contain not-installed libtool libraries
        !          4989: 
        !          4990:     case $linkmode in
        !          4991:     lib)
        !          4992:        passes="conv dlpreopen link"
        !          4993:        for file in $dlfiles $dlprefiles; do
        !          4994:          case $file in
        !          4995:          *.la) ;;
        !          4996:          *)
        !          4997:            func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
        !          4998:            ;;
        !          4999:          esac
        !          5000:        done
        !          5001:        ;;
        !          5002:     prog)
        !          5003:        compile_deplibs=
        !          5004:        finalize_deplibs=
        !          5005:        alldeplibs=no
        !          5006:        newdlfiles=
        !          5007:        newdlprefiles=
        !          5008:        passes="conv scan dlopen dlpreopen link"
        !          5009:        ;;
        !          5010:     *)  passes="conv"
        !          5011:        ;;
        !          5012:     esac
        !          5013: 
        !          5014:     for pass in $passes; do
        !          5015:       # The preopen pass in lib mode reverses $deplibs; put it back here
        !          5016:       # so that -L comes before libs that need it for instance...
        !          5017:       if test "$linkmode,$pass" = "lib,link"; then
        !          5018:        ## FIXME: Find the place where the list is rebuilt in the wrong
        !          5019:        ##        order, and fix it there properly
        !          5020:         tmp_deplibs=
        !          5021:        for deplib in $deplibs; do
        !          5022:          tmp_deplibs="$deplib $tmp_deplibs"
        !          5023:        done
        !          5024:        deplibs="$tmp_deplibs"
        !          5025:       fi
        !          5026: 
        !          5027:       if test "$linkmode,$pass" = "lib,link" ||
        !          5028:         test "$linkmode,$pass" = "prog,scan"; then
        !          5029:        libs="$deplibs"
        !          5030:        deplibs=
        !          5031:       fi
        !          5032:       if test "$linkmode" = prog; then
        !          5033:        case $pass in
        !          5034:        dlopen) libs="$dlfiles" ;;
        !          5035:        dlpreopen) libs="$dlprefiles" ;;
        !          5036:        link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
        !          5037:        esac
        !          5038:       fi
        !          5039:       if test "$linkmode,$pass" = "lib,dlpreopen"; then
        !          5040:        # Collect and forward deplibs of preopened libtool libs
        !          5041:        for lib in $dlprefiles; do
        !          5042:          # Ignore non-libtool-libs
        !          5043:          dependency_libs=
        !          5044:          case $lib in
        !          5045:          *.la) func_source "$lib" ;;
        !          5046:          esac
        !          5047: 
        !          5048:          # Collect preopened libtool deplibs, except any this library
        !          5049:          # has declared as weak libs
        !          5050:          for deplib in $dependency_libs; do
        !          5051:             deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
        !          5052:            case " $weak_libs " in
        !          5053:            *" $deplib_base "*) ;;
        !          5054:            *) deplibs="$deplibs $deplib" ;;
        !          5055:            esac
        !          5056:          done
        !          5057:        done
        !          5058:        libs="$dlprefiles"
        !          5059:       fi
        !          5060:       if test "$pass" = dlopen; then
        !          5061:        # Collect dlpreopened libraries
        !          5062:        save_deplibs="$deplibs"
        !          5063:        deplibs=
        !          5064:       fi
        !          5065: 
        !          5066:       for deplib in $libs; do
        !          5067:        lib=
        !          5068:        found=no
        !          5069:        case $deplib in
        !          5070:        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
        !          5071:          if test "$linkmode,$pass" = "prog,link"; then
        !          5072:            compile_deplibs="$deplib $compile_deplibs"
        !          5073:            finalize_deplibs="$deplib $finalize_deplibs"
        !          5074:          else
        !          5075:            compiler_flags="$compiler_flags $deplib"
        !          5076:            if test "$linkmode" = lib ; then
        !          5077:                case "$new_inherited_linker_flags " in
        !          5078:                    *" $deplib "*) ;;
        !          5079:                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
        !          5080:                esac
        !          5081:            fi
        !          5082:          fi
        !          5083:          continue
        !          5084:          ;;
        !          5085:        -l*)
        !          5086:          if test "$linkmode" != lib && test "$linkmode" != prog; then
        !          5087:            func_warning "\`-l' is ignored for archives/objects"
        !          5088:            continue
        !          5089:          fi
        !          5090:          func_stripname '-l' '' "$deplib"
        !          5091:          name=$func_stripname_result
        !          5092:          if test "$linkmode" = lib; then
        !          5093:            searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
        !          5094:          else
        !          5095:            searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
        !          5096:          fi
        !          5097:          for searchdir in $searchdirs; do
        !          5098:            for search_ext in .la $std_shrext .so .a; do
        !          5099:              # Search the libtool library
        !          5100:              lib="$searchdir/lib${name}${search_ext}"
        !          5101:              if test -f "$lib"; then
        !          5102:                if test "$search_ext" = ".la"; then
        !          5103:                  found=yes
        !          5104:                else
        !          5105:                  found=no
        !          5106:                fi
        !          5107:                break 2
        !          5108:              fi
        !          5109:            done
        !          5110:          done
        !          5111:          if test "$found" != yes; then
        !          5112:            # deplib doesn't seem to be a libtool library
        !          5113:            if test "$linkmode,$pass" = "prog,link"; then
        !          5114:              compile_deplibs="$deplib $compile_deplibs"
        !          5115:              finalize_deplibs="$deplib $finalize_deplibs"
        !          5116:            else
        !          5117:              deplibs="$deplib $deplibs"
        !          5118:              test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
        !          5119:            fi
        !          5120:            continue
        !          5121:          else # deplib is a libtool library
        !          5122:            # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
        !          5123:            # We need to do some special things here, and not later.
        !          5124:            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          5125:              case " $predeps $postdeps " in
        !          5126:              *" $deplib "*)
        !          5127:                if func_lalib_p "$lib"; then
        !          5128:                  library_names=
        !          5129:                  old_library=
        !          5130:                  func_source "$lib"
        !          5131:                  for l in $old_library $library_names; do
        !          5132:                    ll="$l"
        !          5133:                  done
        !          5134:                  if test "X$ll" = "X$old_library" ; then # only static version available
        !          5135:                    found=no
        !          5136:                    func_dirname "$lib" "" "."
        !          5137:                    ladir="$func_dirname_result"
        !          5138:                    lib=$ladir/$old_library
        !          5139:                    if test "$linkmode,$pass" = "prog,link"; then
        !          5140:                      compile_deplibs="$deplib $compile_deplibs"
        !          5141:                      finalize_deplibs="$deplib $finalize_deplibs"
        !          5142:                    else
        !          5143:                      deplibs="$deplib $deplibs"
        !          5144:                      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
        !          5145:                    fi
        !          5146:                    continue
        !          5147:                  fi
        !          5148:                fi
        !          5149:                ;;
        !          5150:              *) ;;
        !          5151:              esac
        !          5152:            fi
        !          5153:          fi
        !          5154:          ;; # -l
        !          5155:        *.ltframework)
        !          5156:          if test "$linkmode,$pass" = "prog,link"; then
        !          5157:            compile_deplibs="$deplib $compile_deplibs"
        !          5158:            finalize_deplibs="$deplib $finalize_deplibs"
        !          5159:          else
        !          5160:            deplibs="$deplib $deplibs"
        !          5161:            if test "$linkmode" = lib ; then
        !          5162:                case "$new_inherited_linker_flags " in
        !          5163:                    *" $deplib "*) ;;
        !          5164:                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
        !          5165:                esac
        !          5166:            fi
        !          5167:          fi
        !          5168:          continue
        !          5169:          ;;
        !          5170:        -L*)
        !          5171:          case $linkmode in
        !          5172:          lib)
        !          5173:            deplibs="$deplib $deplibs"
        !          5174:            test "$pass" = conv && continue
        !          5175:            newdependency_libs="$deplib $newdependency_libs"
        !          5176:            func_stripname '-L' '' "$deplib"
        !          5177:            newlib_search_path="$newlib_search_path $func_stripname_result"
        !          5178:            ;;
        !          5179:          prog)
        !          5180:            if test "$pass" = conv; then
        !          5181:              deplibs="$deplib $deplibs"
        !          5182:              continue
        !          5183:            fi
        !          5184:            if test "$pass" = scan; then
        !          5185:              deplibs="$deplib $deplibs"
        !          5186:            else
        !          5187:              compile_deplibs="$deplib $compile_deplibs"
        !          5188:              finalize_deplibs="$deplib $finalize_deplibs"
        !          5189:            fi
        !          5190:            func_stripname '-L' '' "$deplib"
        !          5191:            newlib_search_path="$newlib_search_path $func_stripname_result"
        !          5192:            ;;
        !          5193:          *)
        !          5194:            func_warning "\`-L' is ignored for archives/objects"
        !          5195:            ;;
        !          5196:          esac # linkmode
        !          5197:          continue
        !          5198:          ;; # -L
        !          5199:        -R*)
        !          5200:          if test "$pass" = link; then
        !          5201:            func_stripname '-R' '' "$deplib"
        !          5202:            dir=$func_stripname_result
        !          5203:            # Make sure the xrpath contains only unique directories.
        !          5204:            case "$xrpath " in
        !          5205:            *" $dir "*) ;;
        !          5206:            *) xrpath="$xrpath $dir" ;;
        !          5207:            esac
        !          5208:          fi
        !          5209:          deplibs="$deplib $deplibs"
        !          5210:          continue
        !          5211:          ;;
        !          5212:        *.la) lib="$deplib" ;;
        !          5213:        *.$libext)
        !          5214:          if test "$pass" = conv; then
        !          5215:            deplibs="$deplib $deplibs"
        !          5216:            continue
        !          5217:          fi
        !          5218:          case $linkmode in
        !          5219:          lib)
        !          5220:            # Linking convenience modules into shared libraries is allowed,
        !          5221:            # but linking other static libraries is non-portable.
        !          5222:            case " $dlpreconveniencelibs " in
        !          5223:            *" $deplib "*) ;;
        !          5224:            *)
        !          5225:              valid_a_lib=no
        !          5226:              case $deplibs_check_method in
        !          5227:                match_pattern*)
        !          5228:                  set dummy $deplibs_check_method; shift
        !          5229:                  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
        !          5230:                  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
        !          5231:                    | $EGREP "$match_pattern_regex" > /dev/null; then
        !          5232:                    valid_a_lib=yes
        !          5233:                  fi
        !          5234:                ;;
        !          5235:                pass_all)
        !          5236:                  valid_a_lib=yes
        !          5237:                ;;
        !          5238:              esac
        !          5239:              if test "$valid_a_lib" != yes; then
        !          5240:                $ECHO
        !          5241:                $ECHO "*** Warning: Trying to link with static lib archive $deplib."
        !          5242:                $ECHO "*** I have the capability to make that library automatically link in when"
        !          5243:                $ECHO "*** you link to this library.  But I can only do this if you have a"
        !          5244:                $ECHO "*** shared version of the library, which you do not appear to have"
        !          5245:                $ECHO "*** because the file extensions .$libext of this argument makes me believe"
        !          5246:                $ECHO "*** that it is just a static archive that I should not use here."
        !          5247:              else
        !          5248:                $ECHO
        !          5249:                $ECHO "*** Warning: Linking the shared library $output against the"
        !          5250:                $ECHO "*** static library $deplib is not portable!"
        !          5251:                deplibs="$deplib $deplibs"
        !          5252:              fi
        !          5253:              ;;
        !          5254:            esac
        !          5255:            continue
        !          5256:            ;;
        !          5257:          prog)
        !          5258:            if test "$pass" != link; then
        !          5259:              deplibs="$deplib $deplibs"
        !          5260:            else
        !          5261:              compile_deplibs="$deplib $compile_deplibs"
        !          5262:              finalize_deplibs="$deplib $finalize_deplibs"
        !          5263:            fi
        !          5264:            continue
        !          5265:            ;;
        !          5266:          esac # linkmode
        !          5267:          ;; # *.$libext
        !          5268:        *.lo | *.$objext)
        !          5269:          if test "$pass" = conv; then
        !          5270:            deplibs="$deplib $deplibs"
        !          5271:          elif test "$linkmode" = prog; then
        !          5272:            if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
        !          5273:              # If there is no dlopen support or we're linking statically,
        !          5274:              # we need to preload.
        !          5275:              newdlprefiles="$newdlprefiles $deplib"
        !          5276:              compile_deplibs="$deplib $compile_deplibs"
        !          5277:              finalize_deplibs="$deplib $finalize_deplibs"
        !          5278:            else
        !          5279:              newdlfiles="$newdlfiles $deplib"
        !          5280:            fi
        !          5281:          fi
        !          5282:          continue
        !          5283:          ;;
        !          5284:        %DEPLIBS%)
        !          5285:          alldeplibs=yes
        !          5286:          continue
        !          5287:          ;;
        !          5288:        esac # case $deplib
        !          5289: 
        !          5290:        if test "$found" = yes || test -f "$lib"; then :
        !          5291:        else
        !          5292:          func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
        !          5293:        fi
        !          5294: 
        !          5295:        # Check to see that this really is a libtool archive.
        !          5296:        func_lalib_unsafe_p "$lib" \
        !          5297:          || func_fatal_error "\`$lib' is not a valid libtool archive"
        !          5298: 
        !          5299:        func_dirname "$lib" "" "."
        !          5300:        ladir="$func_dirname_result"
        !          5301: 
        !          5302:        dlname=
        !          5303:        dlopen=
        !          5304:        dlpreopen=
        !          5305:        libdir=
        !          5306:        library_names=
        !          5307:        old_library=
        !          5308:        inherited_linker_flags=
        !          5309:        # If the library was installed with an old release of libtool,
        !          5310:        # it will not redefine variables installed, or shouldnotlink
        !          5311:        installed=yes
        !          5312:        shouldnotlink=no
        !          5313:        avoidtemprpath=
        !          5314: 
        !          5315: 
        !          5316:        # Read the .la file
        !          5317:        func_source "$lib"
        !          5318: 
        !          5319:        # Convert "-framework foo" to "foo.ltframework"
        !          5320:        if test -n "$inherited_linker_flags"; then
        !          5321:          tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
        !          5322:          for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
        !          5323:            case " $new_inherited_linker_flags " in
        !          5324:              *" $tmp_inherited_linker_flag "*) ;;
        !          5325:              *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
        !          5326:            esac
        !          5327:          done
        !          5328:        fi
        !          5329:        dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          5330:        if test "$linkmode,$pass" = "lib,link" ||
        !          5331:           test "$linkmode,$pass" = "prog,scan" ||
        !          5332:           { test "$linkmode" != prog && test "$linkmode" != lib; }; then
        !          5333:          test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
        !          5334:          test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
        !          5335:        fi
        !          5336: 
        !          5337:        if test "$pass" = conv; then
        !          5338:          # Only check for convenience libraries
        !          5339:          deplibs="$lib $deplibs"
        !          5340:          if test -z "$libdir"; then
        !          5341:            if test -z "$old_library"; then
        !          5342:              func_fatal_error "cannot find name of link library for \`$lib'"
        !          5343:            fi
        !          5344:            # It is a libtool convenience library, so add in its objects.
        !          5345:            convenience="$convenience $ladir/$objdir/$old_library"
        !          5346:            old_convenience="$old_convenience $ladir/$objdir/$old_library"
        !          5347:          elif test "$linkmode" != prog && test "$linkmode" != lib; then
        !          5348:            func_fatal_error "\`$lib' is not a convenience library"
        !          5349:          fi
        !          5350:          tmp_libs=
        !          5351:          for deplib in $dependency_libs; do
        !          5352:            deplibs="$deplib $deplibs"
        !          5353:            if $opt_duplicate_deps ; then
        !          5354:              case "$tmp_libs " in
        !          5355:              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
        !          5356:              esac
        !          5357:            fi
        !          5358:            tmp_libs="$tmp_libs $deplib"
        !          5359:          done
        !          5360:          continue
        !          5361:        fi # $pass = conv
        !          5362: 
        !          5363: 
        !          5364:        # Get the name of the library we link against.
        !          5365:        linklib=
        !          5366:        for l in $old_library $library_names; do
        !          5367:          linklib="$l"
        !          5368:        done
        !          5369:        if test -z "$linklib"; then
        !          5370:          func_fatal_error "cannot find name of link library for \`$lib'"
        !          5371:        fi
        !          5372: 
        !          5373:        # This library was specified with -dlopen.
        !          5374:        if test "$pass" = dlopen; then
        !          5375:          if test -z "$libdir"; then
        !          5376:            func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
        !          5377:          fi
        !          5378:          if test -z "$dlname" ||
        !          5379:             test "$dlopen_support" != yes ||
        !          5380:             test "$build_libtool_libs" = no; then
        !          5381:            # If there is no dlname, no dlopen support or we're linking
        !          5382:            # statically, we need to preload.  We also need to preload any
        !          5383:            # dependent libraries so libltdl's deplib preloader doesn't
        !          5384:            # bomb out in the load deplibs phase.
        !          5385:            dlprefiles="$dlprefiles $lib $dependency_libs"
        !          5386:          else
        !          5387:            newdlfiles="$newdlfiles $lib"
        !          5388:          fi
        !          5389:          continue
        !          5390:        fi # $pass = dlopen
        !          5391: 
        !          5392:        # We need an absolute path.
        !          5393:        case $ladir in
        !          5394:        [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
        !          5395:        *)
        !          5396:          abs_ladir=`cd "$ladir" && pwd`
        !          5397:          if test -z "$abs_ladir"; then
        !          5398:            func_warning "cannot determine absolute directory name of \`$ladir'"
        !          5399:            func_warning "passing it literally to the linker, although it might fail"
        !          5400:            abs_ladir="$ladir"
        !          5401:          fi
        !          5402:          ;;
        !          5403:        esac
        !          5404:        func_basename "$lib"
        !          5405:        laname="$func_basename_result"
        !          5406: 
        !          5407:        # Find the relevant object directory and library name.
        !          5408:        if test "X$installed" = Xyes; then
        !          5409:          if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
        !          5410:            func_warning "library \`$lib' was moved."
        !          5411:            dir="$ladir"
        !          5412:            absdir="$abs_ladir"
        !          5413:            libdir="$abs_ladir"
        !          5414:          else
        !          5415:            dir="$libdir"
        !          5416:            absdir="$libdir"
        !          5417:          fi
        !          5418:          test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
        !          5419:        else
        !          5420:          if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
        !          5421:            dir="$ladir"
        !          5422:            absdir="$abs_ladir"
        !          5423:            # Remove this search path later
        !          5424:            notinst_path="$notinst_path $abs_ladir"
        !          5425:          else
        !          5426:            dir="$ladir/$objdir"
        !          5427:            absdir="$abs_ladir/$objdir"
        !          5428:            # Remove this search path later
        !          5429:            notinst_path="$notinst_path $abs_ladir"
        !          5430:          fi
        !          5431:        fi # $installed = yes
        !          5432:        func_stripname 'lib' '.la' "$laname"
        !          5433:        name=$func_stripname_result
        !          5434: 
        !          5435:        # This library was specified with -dlpreopen.
        !          5436:        if test "$pass" = dlpreopen; then
        !          5437:          if test -z "$libdir" && test "$linkmode" = prog; then
        !          5438:            func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
        !          5439:          fi
        !          5440:          # Prefer using a static library (so that no silly _DYNAMIC symbols
        !          5441:          # are required to link).
        !          5442:          if test -n "$old_library"; then
        !          5443:            newdlprefiles="$newdlprefiles $dir/$old_library"
        !          5444:            # Keep a list of preopened convenience libraries to check
        !          5445:            # that they are being used correctly in the link pass.
        !          5446:            test -z "$libdir" && \
        !          5447:                dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
        !          5448:          # Otherwise, use the dlname, so that lt_dlopen finds it.
        !          5449:          elif test -n "$dlname"; then
        !          5450:            newdlprefiles="$newdlprefiles $dir/$dlname"
        !          5451:          else
        !          5452:            newdlprefiles="$newdlprefiles $dir/$linklib"
        !          5453:          fi
        !          5454:        fi # $pass = dlpreopen
        !          5455: 
        !          5456:        if test -z "$libdir"; then
        !          5457:          # Link the convenience library
        !          5458:          if test "$linkmode" = lib; then
        !          5459:            deplibs="$dir/$old_library $deplibs"
        !          5460:          elif test "$linkmode,$pass" = "prog,link"; then
        !          5461:            compile_deplibs="$dir/$old_library $compile_deplibs"
        !          5462:            finalize_deplibs="$dir/$old_library $finalize_deplibs"
        !          5463:          else
        !          5464:            deplibs="$lib $deplibs" # used for prog,scan pass
        !          5465:          fi
        !          5466:          continue
        !          5467:        fi
        !          5468: 
        !          5469: 
        !          5470:        if test "$linkmode" = prog && test "$pass" != link; then
        !          5471:          newlib_search_path="$newlib_search_path $ladir"
        !          5472:          deplibs="$lib $deplibs"
        !          5473: 
        !          5474:          linkalldeplibs=no
        !          5475:          if test "$link_all_deplibs" != no || test -z "$library_names" ||
        !          5476:             test "$build_libtool_libs" = no; then
        !          5477:            linkalldeplibs=yes
        !          5478:          fi
        !          5479: 
        !          5480:          tmp_libs=
        !          5481:          for deplib in $dependency_libs; do
        !          5482:            case $deplib in
        !          5483:            -L*) func_stripname '-L' '' "$deplib"
        !          5484:                 newlib_search_path="$newlib_search_path $func_stripname_result"
        !          5485:                 ;;
        !          5486:            esac
        !          5487:            # Need to link against all dependency_libs?
        !          5488:            if test "$linkalldeplibs" = yes; then
        !          5489:              deplibs="$deplib $deplibs"
        !          5490:            else
        !          5491:              # Need to hardcode shared library paths
        !          5492:              # or/and link against static libraries
        !          5493:              newdependency_libs="$deplib $newdependency_libs"
        !          5494:            fi
        !          5495:            if $opt_duplicate_deps ; then
        !          5496:              case "$tmp_libs " in
        !          5497:              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
        !          5498:              esac
        !          5499:            fi
        !          5500:            tmp_libs="$tmp_libs $deplib"
        !          5501:          done # for deplib
        !          5502:          continue
        !          5503:        fi # $linkmode = prog...
        !          5504: 
        !          5505:        if test "$linkmode,$pass" = "prog,link"; then
        !          5506:          if test -n "$library_names" &&
        !          5507:             { { test "$prefer_static_libs" = no ||
        !          5508:                 test "$prefer_static_libs,$installed" = "built,yes"; } ||
        !          5509:               test -z "$old_library"; }; then
        !          5510:            # We need to hardcode the library path
        !          5511:            if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
        !          5512:              # Make sure the rpath contains only unique directories.
        !          5513:              case "$temp_rpath:" in
        !          5514:              *"$absdir:"*) ;;
        !          5515:              *) temp_rpath="$temp_rpath$absdir:" ;;
        !          5516:              esac
        !          5517:            fi
        !          5518: 
        !          5519:            # Hardcode the library path.
        !          5520:            # Skip directories that are in the system default run-time
        !          5521:            # search path.
        !          5522:            case " $sys_lib_dlsearch_path " in
        !          5523:            *" $absdir "*) ;;
        !          5524:            *)
        !          5525:              case "$compile_rpath " in
        !          5526:              *" $absdir "*) ;;
        !          5527:              *) compile_rpath="$compile_rpath $absdir"
        !          5528:              esac
        !          5529:              ;;
        !          5530:            esac
        !          5531:            case " $sys_lib_dlsearch_path " in
        !          5532:            *" $libdir "*) ;;
        !          5533:            *)
        !          5534:              case "$finalize_rpath " in
        !          5535:              *" $libdir "*) ;;
        !          5536:              *) finalize_rpath="$finalize_rpath $libdir"
        !          5537:              esac
        !          5538:              ;;
        !          5539:            esac
        !          5540:          fi # $linkmode,$pass = prog,link...
        !          5541: 
        !          5542:          if test "$alldeplibs" = yes &&
        !          5543:             { test "$deplibs_check_method" = pass_all ||
        !          5544:               { test "$build_libtool_libs" = yes &&
        !          5545:                 test -n "$library_names"; }; }; then
        !          5546:            # We only need to search for static libraries
        !          5547:            continue
        !          5548:          fi
        !          5549:        fi
        !          5550: 
        !          5551:        link_static=no # Whether the deplib will be linked statically
        !          5552:        use_static_libs=$prefer_static_libs
        !          5553:        if test "$use_static_libs" = built && test "$installed" = yes; then
        !          5554:          use_static_libs=no
        !          5555:        fi
        !          5556:        if test -n "$library_names" &&
        !          5557:           { test "$use_static_libs" = no || test -z "$old_library"; }; then
        !          5558:          case $host in
        !          5559:          *cygwin* | *mingw* | *cegcc*)
        !          5560:              # No point in relinking DLLs because paths are not encoded
        !          5561:              notinst_deplibs="$notinst_deplibs $lib"
        !          5562:              need_relink=no
        !          5563:            ;;
        !          5564:          *)
        !          5565:            if test "$installed" = no; then
        !          5566:              notinst_deplibs="$notinst_deplibs $lib"
        !          5567:              need_relink=yes
        !          5568:            fi
        !          5569:            ;;
        !          5570:          esac
        !          5571:          # This is a shared library
        !          5572: 
        !          5573:          # Warn about portability, can't link against -module's on some
        !          5574:          # systems (darwin).  Don't bleat about dlopened modules though!
        !          5575:          dlopenmodule=""
        !          5576:          for dlpremoduletest in $dlprefiles; do
        !          5577:            if test "X$dlpremoduletest" = "X$lib"; then
        !          5578:              dlopenmodule="$dlpremoduletest"
        !          5579:              break
        !          5580:            fi
        !          5581:          done
        !          5582:          if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
        !          5583:            $ECHO
        !          5584:            if test "$linkmode" = prog; then
        !          5585:              $ECHO "*** Warning: Linking the executable $output against the loadable module"
        !          5586:            else
        !          5587:              $ECHO "*** Warning: Linking the shared library $output against the loadable module"
        !          5588:            fi
        !          5589:            $ECHO "*** $linklib is not portable!"
        !          5590:          fi
        !          5591:          if test "$linkmode" = lib &&
        !          5592:             test "$hardcode_into_libs" = yes; then
        !          5593:            # Hardcode the library path.
        !          5594:            # Skip directories that are in the system default run-time
        !          5595:            # search path.
        !          5596:            case " $sys_lib_dlsearch_path " in
        !          5597:            *" $absdir "*) ;;
        !          5598:            *)
        !          5599:              case "$compile_rpath " in
        !          5600:              *" $absdir "*) ;;
        !          5601:              *) compile_rpath="$compile_rpath $absdir"
        !          5602:              esac
        !          5603:              ;;
        !          5604:            esac
        !          5605:            case " $sys_lib_dlsearch_path " in
        !          5606:            *" $libdir "*) ;;
        !          5607:            *)
        !          5608:              case "$finalize_rpath " in
        !          5609:              *" $libdir "*) ;;
        !          5610:              *) finalize_rpath="$finalize_rpath $libdir"
        !          5611:              esac
        !          5612:              ;;
        !          5613:            esac
        !          5614:          fi
        !          5615: 
        !          5616:          if test -n "$old_archive_from_expsyms_cmds"; then
        !          5617:            # figure out the soname
        !          5618:            set dummy $library_names
        !          5619:            shift
        !          5620:            realname="$1"
        !          5621:            shift
        !          5622:            libname=`eval "\\$ECHO \"$libname_spec\""`
        !          5623:            # use dlname if we got it. it's perfectly good, no?
        !          5624:            if test -n "$dlname"; then
        !          5625:              soname="$dlname"
        !          5626:            elif test -n "$soname_spec"; then
        !          5627:              # bleh windows
        !          5628:              case $host in
        !          5629:              *cygwin* | mingw* | *cegcc*)
        !          5630:                func_arith $current - $age
        !          5631:                major=$func_arith_result
        !          5632:                versuffix="-$major"
        !          5633:                ;;
        !          5634:              esac
        !          5635:              eval soname=\"$soname_spec\"
        !          5636:            else
        !          5637:              soname="$realname"
        !          5638:            fi
        !          5639: 
        !          5640:            # Make a new name for the extract_expsyms_cmds to use
        !          5641:            soroot="$soname"
        !          5642:            func_basename "$soroot"
        !          5643:            soname="$func_basename_result"
        !          5644:            func_stripname 'lib' '.dll' "$soname"
        !          5645:            newlib=libimp-$func_stripname_result.a
        !          5646: 
        !          5647:            # If the library has no export list, then create one now
        !          5648:            if test -f "$output_objdir/$soname-def"; then :
        !          5649:            else
        !          5650:              func_verbose "extracting exported symbol list from \`$soname'"
        !          5651:              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
        !          5652:            fi
        !          5653: 
        !          5654:            # Create $newlib
        !          5655:            if test -f "$output_objdir/$newlib"; then :; else
        !          5656:              func_verbose "generating import library for \`$soname'"
        !          5657:              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
        !          5658:            fi
        !          5659:            # make sure the library variables are pointing to the new library
        !          5660:            dir=$output_objdir
        !          5661:            linklib=$newlib
        !          5662:          fi # test -n "$old_archive_from_expsyms_cmds"
        !          5663: 
        !          5664:          if test "$linkmode" = prog || test "$mode" != relink; then
        !          5665:            add_shlibpath=
        !          5666:            add_dir=
        !          5667:            add=
        !          5668:            lib_linked=yes
        !          5669:            case $hardcode_action in
        !          5670:            immediate | unsupported)
        !          5671:              if test "$hardcode_direct" = no; then
        !          5672:                add="$dir/$linklib"
        !          5673:                case $host in
        !          5674:                  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
        !          5675:                  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
        !          5676:                  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
        !          5677:                    *-*-unixware7*) add_dir="-L$dir" ;;
        !          5678:                  *-*-darwin* )
        !          5679:                    # if the lib is a (non-dlopened) module then we can not
        !          5680:                    # link against it, someone is ignoring the earlier warnings
        !          5681:                    if /usr/bin/file -L $add 2> /dev/null |
        !          5682:                         $GREP ": [^:]* bundle" >/dev/null ; then
        !          5683:                      if test "X$dlopenmodule" != "X$lib"; then
        !          5684:                        $ECHO "*** Warning: lib $linklib is a module, not a shared library"
        !          5685:                        if test -z "$old_library" ; then
        !          5686:                          $ECHO
        !          5687:                          $ECHO "*** And there doesn't seem to be a static archive available"
        !          5688:                          $ECHO "*** The link will probably fail, sorry"
        !          5689:                        else
        !          5690:                          add="$dir/$old_library"
        !          5691:                        fi
        !          5692:                      elif test -n "$old_library"; then
        !          5693:                        add="$dir/$old_library"
        !          5694:                      fi
        !          5695:                    fi
        !          5696:                esac
        !          5697:              elif test "$hardcode_minus_L" = no; then
        !          5698:                case $host in
        !          5699:                *-*-sunos*) add_shlibpath="$dir" ;;
        !          5700:                esac
        !          5701:                add_dir="-L$dir"
        !          5702:                add="-l$name"
        !          5703:              elif test "$hardcode_shlibpath_var" = no; then
        !          5704:                add_shlibpath="$dir"
        !          5705:                add="-l$name"
        !          5706:              else
        !          5707:                lib_linked=no
        !          5708:              fi
        !          5709:              ;;
        !          5710:            relink)
        !          5711:              if test "$hardcode_direct" = yes &&
        !          5712:                 test "$hardcode_direct_absolute" = no; then
        !          5713:                add="$dir/$linklib"
        !          5714:              elif test "$hardcode_minus_L" = yes; then
        !          5715:                add_dir="-L$dir"
        !          5716:                # Try looking first in the location we're being installed to.
        !          5717:                if test -n "$inst_prefix_dir"; then
        !          5718:                  case $libdir in
        !          5719:                    [\\/]*)
        !          5720:                      add_dir="$add_dir -L$inst_prefix_dir$libdir"
        !          5721:                      ;;
        !          5722:                  esac
        !          5723:                fi
        !          5724:                add="-l$name"
        !          5725:              elif test "$hardcode_shlibpath_var" = yes; then
        !          5726:                add_shlibpath="$dir"
        !          5727:                add="-l$name"
        !          5728:              else
        !          5729:                lib_linked=no
        !          5730:              fi
        !          5731:              ;;
        !          5732:            *) lib_linked=no ;;
        !          5733:            esac
        !          5734: 
        !          5735:            if test "$lib_linked" != yes; then
        !          5736:              func_fatal_configuration "unsupported hardcode properties"
        !          5737:            fi
        !          5738: 
        !          5739:            if test -n "$add_shlibpath"; then
        !          5740:              case :$compile_shlibpath: in
        !          5741:              *":$add_shlibpath:"*) ;;
        !          5742:              *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
        !          5743:              esac
        !          5744:            fi
        !          5745:            if test "$linkmode" = prog; then
        !          5746:              test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
        !          5747:              test -n "$add" && compile_deplibs="$add $compile_deplibs"
        !          5748:            else
        !          5749:              test -n "$add_dir" && deplibs="$add_dir $deplibs"
        !          5750:              test -n "$add" && deplibs="$add $deplibs"
        !          5751:              if test "$hardcode_direct" != yes &&
        !          5752:                 test "$hardcode_minus_L" != yes &&
        !          5753:                 test "$hardcode_shlibpath_var" = yes; then
        !          5754:                case :$finalize_shlibpath: in
        !          5755:                *":$libdir:"*) ;;
        !          5756:                *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
        !          5757:                esac
        !          5758:              fi
        !          5759:            fi
        !          5760:          fi
        !          5761: 
        !          5762:          if test "$linkmode" = prog || test "$mode" = relink; then
        !          5763:            add_shlibpath=
        !          5764:            add_dir=
        !          5765:            add=
        !          5766:            # Finalize command for both is simple: just hardcode it.
        !          5767:            if test "$hardcode_direct" = yes &&
        !          5768:               test "$hardcode_direct_absolute" = no; then
        !          5769:              add="$libdir/$linklib"
        !          5770:            elif test "$hardcode_minus_L" = yes; then
        !          5771:              add_dir="-L$libdir"
        !          5772:              add="-l$name"
        !          5773:            elif test "$hardcode_shlibpath_var" = yes; then
        !          5774:              case :$finalize_shlibpath: in
        !          5775:              *":$libdir:"*) ;;
        !          5776:              *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
        !          5777:              esac
        !          5778:              add="-l$name"
        !          5779:            elif test "$hardcode_automatic" = yes; then
        !          5780:              if test -n "$inst_prefix_dir" &&
        !          5781:                 test -f "$inst_prefix_dir$libdir/$linklib" ; then
        !          5782:                add="$inst_prefix_dir$libdir/$linklib"
        !          5783:              else
        !          5784:                add="$libdir/$linklib"
        !          5785:              fi
        !          5786:            else
        !          5787:              # We cannot seem to hardcode it, guess we'll fake it.
        !          5788:              add_dir="-L$libdir"
        !          5789:              # Try looking first in the location we're being installed to.
        !          5790:              if test -n "$inst_prefix_dir"; then
        !          5791:                case $libdir in
        !          5792:                  [\\/]*)
        !          5793:                    add_dir="$add_dir -L$inst_prefix_dir$libdir"
        !          5794:                    ;;
        !          5795:                esac
        !          5796:              fi
        !          5797:              add="-l$name"
        !          5798:            fi
        !          5799: 
        !          5800:            if test "$linkmode" = prog; then
        !          5801:              test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
        !          5802:              test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
        !          5803:            else
        !          5804:              test -n "$add_dir" && deplibs="$add_dir $deplibs"
        !          5805:              test -n "$add" && deplibs="$add $deplibs"
        !          5806:            fi
        !          5807:          fi
        !          5808:        elif test "$linkmode" = prog; then
        !          5809:          # Here we assume that one of hardcode_direct or hardcode_minus_L
        !          5810:          # is not unsupported.  This is valid on all known static and
        !          5811:          # shared platforms.
        !          5812:          if test "$hardcode_direct" != unsupported; then
        !          5813:            test -n "$old_library" && linklib="$old_library"
        !          5814:            compile_deplibs="$dir/$linklib $compile_deplibs"
        !          5815:            finalize_deplibs="$dir/$linklib $finalize_deplibs"
        !          5816:          else
        !          5817:            compile_deplibs="-l$name -L$dir $compile_deplibs"
        !          5818:            finalize_deplibs="-l$name -L$dir $finalize_deplibs"
        !          5819:          fi
        !          5820:        elif test "$build_libtool_libs" = yes; then
        !          5821:          # Not a shared library
        !          5822:          if test "$deplibs_check_method" != pass_all; then
        !          5823:            # We're trying link a shared library against a static one
        !          5824:            # but the system doesn't support it.
        !          5825: 
        !          5826:            # Just print a warning and add the library to dependency_libs so
        !          5827:            # that the program can be linked against the static library.
        !          5828:            $ECHO
        !          5829:            $ECHO "*** Warning: This system can not link to static lib archive $lib."
        !          5830:            $ECHO "*** I have the capability to make that library automatically link in when"
        !          5831:            $ECHO "*** you link to this library.  But I can only do this if you have a"
        !          5832:            $ECHO "*** shared version of the library, which you do not appear to have."
        !          5833:            if test "$module" = yes; then
        !          5834:              $ECHO "*** But as you try to build a module library, libtool will still create "
        !          5835:              $ECHO "*** a static module, that should work as long as the dlopening application"
        !          5836:              $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
        !          5837:              if test -z "$global_symbol_pipe"; then
        !          5838:                $ECHO
        !          5839:                $ECHO "*** However, this would only work if libtool was able to extract symbol"
        !          5840:                $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
        !          5841:                $ECHO "*** not find such a program.  So, this module is probably useless."
        !          5842:                $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
        !          5843:              fi
        !          5844:              if test "$build_old_libs" = no; then
        !          5845:                build_libtool_libs=module
        !          5846:                build_old_libs=yes
        !          5847:              else
        !          5848:                build_libtool_libs=no
        !          5849:              fi
        !          5850:            fi
        !          5851:          else
        !          5852:            deplibs="$dir/$old_library $deplibs"
        !          5853:            link_static=yes
        !          5854:          fi
        !          5855:        fi # link shared/static library?
        !          5856: 
        !          5857:        if test "$linkmode" = lib; then
        !          5858:          if test -n "$dependency_libs" &&
        !          5859:             { test "$hardcode_into_libs" != yes ||
        !          5860:               test "$build_old_libs" = yes ||
        !          5861:               test "$link_static" = yes; }; then
        !          5862:            # Extract -R from dependency_libs
        !          5863:            temp_deplibs=
        !          5864:            for libdir in $dependency_libs; do
        !          5865:              case $libdir in
        !          5866:              -R*) func_stripname '-R' '' "$libdir"
        !          5867:                   temp_xrpath=$func_stripname_result
        !          5868:                   case " $xrpath " in
        !          5869:                   *" $temp_xrpath "*) ;;
        !          5870:                   *) xrpath="$xrpath $temp_xrpath";;
        !          5871:                   esac;;
        !          5872:              *) temp_deplibs="$temp_deplibs $libdir";;
        !          5873:              esac
        !          5874:            done
        !          5875:            dependency_libs="$temp_deplibs"
        !          5876:          fi
        !          5877: 
        !          5878:          newlib_search_path="$newlib_search_path $absdir"
        !          5879:          # Link against this library
        !          5880:          test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
        !          5881:          # ... and its dependency_libs
        !          5882:          tmp_libs=
        !          5883:          for deplib in $dependency_libs; do
        !          5884:            newdependency_libs="$deplib $newdependency_libs"
        !          5885:            if $opt_duplicate_deps ; then
        !          5886:              case "$tmp_libs " in
        !          5887:              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
        !          5888:              esac
        !          5889:            fi
        !          5890:            tmp_libs="$tmp_libs $deplib"
        !          5891:          done
        !          5892: 
        !          5893:          if test "$link_all_deplibs" != no; then
        !          5894:            # Add the search paths of all dependency libraries
        !          5895:            for deplib in $dependency_libs; do
        !          5896:              case $deplib in
        !          5897:              -L*) path="$deplib" ;;
        !          5898:              *.la)
        !          5899:                func_dirname "$deplib" "" "."
        !          5900:                dir="$func_dirname_result"
        !          5901:                # We need an absolute path.
        !          5902:                case $dir in
        !          5903:                [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
        !          5904:                *)
        !          5905:                  absdir=`cd "$dir" && pwd`
        !          5906:                  if test -z "$absdir"; then
        !          5907:                    func_warning "cannot determine absolute directory name of \`$dir'"
        !          5908:                    absdir="$dir"
        !          5909:                  fi
        !          5910:                  ;;
        !          5911:                esac
        !          5912:                if $GREP "^installed=no" $deplib > /dev/null; then
        !          5913:                case $host in
        !          5914:                *-*-darwin*)
        !          5915:                  depdepl=
        !          5916:                  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
        !          5917:                  if test -n "$deplibrary_names" ; then
        !          5918:                    for tmp in $deplibrary_names ; do
        !          5919:                      depdepl=$tmp
        !          5920:                    done
        !          5921:                    if test -f "$absdir/$objdir/$depdepl" ; then
        !          5922:                      depdepl="$absdir/$objdir/$depdepl"
        !          5923:                      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
        !          5924:                       if test -z "$darwin_install_name"; then
        !          5925:                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
        !          5926:                       fi
        !          5927:                      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
        !          5928:                      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
        !          5929:                      path=
        !          5930:                    fi
        !          5931:                  fi
        !          5932:                  ;;
        !          5933:                *)
        !          5934:                  path="-L$absdir/$objdir"
        !          5935:                  ;;
        !          5936:                esac
        !          5937:                else
        !          5938:                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
        !          5939:                  test -z "$libdir" && \
        !          5940:                    func_fatal_error "\`$deplib' is not a valid libtool archive"
        !          5941:                  test "$absdir" != "$libdir" && \
        !          5942:                    func_warning "\`$deplib' seems to be moved"
        !          5943: 
        !          5944:                  path="-L$absdir"
        !          5945:                fi
        !          5946:                ;;
        !          5947:              esac
        !          5948:              case " $deplibs " in
        !          5949:              *" $path "*) ;;
        !          5950:              *) deplibs="$path $deplibs" ;;
        !          5951:              esac
        !          5952:            done
        !          5953:          fi # link_all_deplibs != no
        !          5954:        fi # linkmode = lib
        !          5955:       done # for deplib in $libs
        !          5956:       if test "$pass" = link; then
        !          5957:        if test "$linkmode" = "prog"; then
        !          5958:          compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
        !          5959:          finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
        !          5960:        else
        !          5961:          compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          5962:        fi
        !          5963:       fi
        !          5964:       dependency_libs="$newdependency_libs"
        !          5965:       if test "$pass" = dlpreopen; then
        !          5966:        # Link the dlpreopened libraries before other libraries
        !          5967:        for deplib in $save_deplibs; do
        !          5968:          deplibs="$deplib $deplibs"
        !          5969:        done
        !          5970:       fi
        !          5971:       if test "$pass" != dlopen; then
        !          5972:        if test "$pass" != conv; then
        !          5973:          # Make sure lib_search_path contains only unique directories.
        !          5974:          lib_search_path=
        !          5975:          for dir in $newlib_search_path; do
        !          5976:            case "$lib_search_path " in
        !          5977:            *" $dir "*) ;;
        !          5978:            *) lib_search_path="$lib_search_path $dir" ;;
        !          5979:            esac
        !          5980:          done
        !          5981:          newlib_search_path=
        !          5982:        fi
        !          5983: 
        !          5984:        if test "$linkmode,$pass" != "prog,link"; then
        !          5985:          vars="deplibs"
        !          5986:        else
        !          5987:          vars="compile_deplibs finalize_deplibs"
        !          5988:        fi
        !          5989:        for var in $vars dependency_libs; do
        !          5990:          # Add libraries to $var in reverse order
        !          5991:          eval tmp_libs=\"\$$var\"
        !          5992:          new_libs=
        !          5993:          for deplib in $tmp_libs; do
        !          5994:            # FIXME: Pedantically, this is the right thing to do, so
        !          5995:            #        that some nasty dependency loop isn't accidentally
        !          5996:            #        broken:
        !          5997:            #new_libs="$deplib $new_libs"
        !          5998:            # Pragmatically, this seems to cause very few problems in
        !          5999:            # practice:
        !          6000:            case $deplib in
        !          6001:            -L*) new_libs="$deplib $new_libs" ;;
        !          6002:            -R*) ;;
        !          6003:            *)
        !          6004:              # And here is the reason: when a library appears more
        !          6005:              # than once as an explicit dependence of a library, or
        !          6006:              # is implicitly linked in more than once by the
        !          6007:              # compiler, it is considered special, and multiple
        !          6008:              # occurrences thereof are not removed.  Compare this
        !          6009:              # with having the same library being listed as a
        !          6010:              # dependency of multiple other libraries: in this case,
        !          6011:              # we know (pedantically, we assume) the library does not
        !          6012:              # need to be listed more than once, so we keep only the
        !          6013:              # last copy.  This is not always right, but it is rare
        !          6014:              # enough that we require users that really mean to play
        !          6015:              # such unportable linking tricks to link the library
        !          6016:              # using -Wl,-lname, so that libtool does not consider it
        !          6017:              # for duplicate removal.
        !          6018:              case " $specialdeplibs " in
        !          6019:              *" $deplib "*) new_libs="$deplib $new_libs" ;;
        !          6020:              *)
        !          6021:                case " $new_libs " in
        !          6022:                *" $deplib "*) ;;
        !          6023:                *) new_libs="$deplib $new_libs" ;;
        !          6024:                esac
        !          6025:                ;;
        !          6026:              esac
        !          6027:              ;;
        !          6028:            esac
        !          6029:          done
        !          6030:          tmp_libs=
        !          6031:          for deplib in $new_libs; do
        !          6032:            case $deplib in
        !          6033:            -L*)
        !          6034:              case " $tmp_libs " in
        !          6035:              *" $deplib "*) ;;
        !          6036:              *) tmp_libs="$tmp_libs $deplib" ;;
        !          6037:              esac
        !          6038:              ;;
        !          6039:            *) tmp_libs="$tmp_libs $deplib" ;;
        !          6040:            esac
        !          6041:          done
        !          6042:          eval $var=\"$tmp_libs\"
        !          6043:        done # for var
        !          6044:       fi
        !          6045:       # Last step: remove runtime libs from dependency_libs
        !          6046:       # (they stay in deplibs)
        !          6047:       tmp_libs=
        !          6048:       for i in $dependency_libs ; do
        !          6049:        case " $predeps $postdeps $compiler_lib_search_path " in
        !          6050:        *" $i "*)
        !          6051:          i=""
        !          6052:          ;;
        !          6053:        esac
        !          6054:        if test -n "$i" ; then
        !          6055:          tmp_libs="$tmp_libs $i"
        !          6056:        fi
        !          6057:       done
        !          6058:       dependency_libs=$tmp_libs
        !          6059:     done # for pass
        !          6060:     if test "$linkmode" = prog; then
        !          6061:       dlfiles="$newdlfiles"
        !          6062:     fi
        !          6063:     if test "$linkmode" = prog || test "$linkmode" = lib; then
        !          6064:       dlprefiles="$newdlprefiles"
        !          6065:     fi
        !          6066: 
        !          6067:     case $linkmode in
        !          6068:     oldlib)
        !          6069:       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        !          6070:        func_warning "\`-dlopen' is ignored for archives"
        !          6071:       fi
        !          6072: 
        !          6073:       case " $deplibs" in
        !          6074:       *\ -l* | *\ -L*)
        !          6075:        func_warning "\`-l' and \`-L' are ignored for archives" ;;
        !          6076:       esac
        !          6077: 
        !          6078:       test -n "$rpath" && \
        !          6079:        func_warning "\`-rpath' is ignored for archives"
        !          6080: 
        !          6081:       test -n "$xrpath" && \
        !          6082:        func_warning "\`-R' is ignored for archives"
        !          6083: 
        !          6084:       test -n "$vinfo" && \
        !          6085:        func_warning "\`-version-info/-version-number' is ignored for archives"
        !          6086: 
        !          6087:       test -n "$release" && \
        !          6088:        func_warning "\`-release' is ignored for archives"
        !          6089: 
        !          6090:       test -n "$export_symbols$export_symbols_regex" && \
        !          6091:        func_warning "\`-export-symbols' is ignored for archives"
        !          6092: 
        !          6093:       # Now set the variables for building old libraries.
        !          6094:       build_libtool_libs=no
        !          6095:       oldlibs="$output"
        !          6096:       objs="$objs$old_deplibs"
        !          6097:       ;;
        !          6098: 
        !          6099:     lib)
        !          6100:       # Make sure we only generate libraries of the form `libNAME.la'.
        !          6101:       case $outputname in
        !          6102:       lib*)
        !          6103:        func_stripname 'lib' '.la' "$outputname"
        !          6104:        name=$func_stripname_result
        !          6105:        eval shared_ext=\"$shrext_cmds\"
        !          6106:        eval libname=\"$libname_spec\"
        !          6107:        ;;
        !          6108:       *)
        !          6109:        test "$module" = no && \
        !          6110:          func_fatal_help "libtool library \`$output' must begin with \`lib'"
        !          6111: 
        !          6112:        if test "$need_lib_prefix" != no; then
        !          6113:          # Add the "lib" prefix for modules if required
        !          6114:          func_stripname '' '.la' "$outputname"
        !          6115:          name=$func_stripname_result
        !          6116:          eval shared_ext=\"$shrext_cmds\"
        !          6117:          eval libname=\"$libname_spec\"
        !          6118:        else
        !          6119:          func_stripname '' '.la' "$outputname"
        !          6120:          libname=$func_stripname_result
        !          6121:        fi
        !          6122:        ;;
        !          6123:       esac
        !          6124: 
        !          6125:       if test -n "$objs"; then
        !          6126:        if test "$deplibs_check_method" != pass_all; then
        !          6127:          func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
        !          6128:        else
        !          6129:          $ECHO
        !          6130:          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
        !          6131:          $ECHO "*** objects $objs is not portable!"
        !          6132:          libobjs="$libobjs $objs"
        !          6133:        fi
        !          6134:       fi
        !          6135: 
        !          6136:       test "$dlself" != no && \
        !          6137:        func_warning "\`-dlopen self' is ignored for libtool libraries"
        !          6138: 
        !          6139:       set dummy $rpath
        !          6140:       shift
        !          6141:       test "$#" -gt 1 && \
        !          6142:        func_warning "ignoring multiple \`-rpath's for a libtool library"
        !          6143: 
        !          6144:       install_libdir="$1"
        !          6145: 
        !          6146:       oldlibs=
        !          6147:       if test -z "$rpath"; then
        !          6148:        if test "$build_libtool_libs" = yes; then
        !          6149:          # Building a libtool convenience library.
        !          6150:          # Some compilers have problems with a `.al' extension so
        !          6151:          # convenience libraries should have the same extension an
        !          6152:          # archive normally would.
        !          6153:          oldlibs="$output_objdir/$libname.$libext $oldlibs"
        !          6154:          build_libtool_libs=convenience
        !          6155:          build_old_libs=yes
        !          6156:        fi
        !          6157: 
        !          6158:        test -n "$vinfo" && \
        !          6159:          func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
        !          6160: 
        !          6161:        test -n "$release" && \
        !          6162:          func_warning "\`-release' is ignored for convenience libraries"
        !          6163:       else
        !          6164: 
        !          6165:        # Parse the version information argument.
        !          6166:        save_ifs="$IFS"; IFS=':'
        !          6167:        set dummy $vinfo 0 0 0
        !          6168:        shift
        !          6169:        IFS="$save_ifs"
        !          6170: 
        !          6171:        test -n "$7" && \
        !          6172:          func_fatal_help "too many parameters to \`-version-info'"
        !          6173: 
        !          6174:        # convert absolute version numbers to libtool ages
        !          6175:        # this retains compatibility with .la files and attempts
        !          6176:        # to make the code below a bit more comprehensible
        !          6177: 
        !          6178:        case $vinfo_number in
        !          6179:        yes)
        !          6180:          number_major="$1"
        !          6181:          number_minor="$2"
        !          6182:          number_revision="$3"
        !          6183:          #
        !          6184:          # There are really only two kinds -- those that
        !          6185:          # use the current revision as the major version
        !          6186:          # and those that subtract age and use age as
        !          6187:          # a minor version.  But, then there is irix
        !          6188:          # which has an extra 1 added just for fun
        !          6189:          #
        !          6190:          case $version_type in
        !          6191:          darwin|linux|osf|windows|none)
        !          6192:            func_arith $number_major + $number_minor
        !          6193:            current=$func_arith_result
        !          6194:            age="$number_minor"
        !          6195:            revision="$number_revision"
        !          6196:            ;;
        !          6197:          freebsd-aout|freebsd-elf|sunos)
        !          6198:            current="$number_major"
        !          6199:            revision="$number_minor"
        !          6200:            age="0"
        !          6201:            ;;
        !          6202:          irix|nonstopux)
        !          6203:            func_arith $number_major + $number_minor
        !          6204:            current=$func_arith_result
        !          6205:            age="$number_minor"
        !          6206:            revision="$number_minor"
        !          6207:            lt_irix_increment=no
        !          6208:            ;;
        !          6209:          esac
        !          6210:          ;;
        !          6211:        no)
        !          6212:          current="$1"
        !          6213:          revision="$2"
        !          6214:          age="$3"
        !          6215:          ;;
        !          6216:        esac
        !          6217: 
        !          6218:        # Check that each of the things are valid numbers.
        !          6219:        case $current in
        !          6220:        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        !          6221:        *)
        !          6222:          func_error "CURRENT \`$current' must be a nonnegative integer"
        !          6223:          func_fatal_error "\`$vinfo' is not valid version information"
        !          6224:          ;;
        !          6225:        esac
        !          6226: 
        !          6227:        case $revision in
        !          6228:        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        !          6229:        *)
        !          6230:          func_error "REVISION \`$revision' must be a nonnegative integer"
        !          6231:          func_fatal_error "\`$vinfo' is not valid version information"
        !          6232:          ;;
        !          6233:        esac
        !          6234: 
        !          6235:        case $age in
        !          6236:        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        !          6237:        *)
        !          6238:          func_error "AGE \`$age' must be a nonnegative integer"
        !          6239:          func_fatal_error "\`$vinfo' is not valid version information"
        !          6240:          ;;
        !          6241:        esac
        !          6242: 
        !          6243:        if test "$age" -gt "$current"; then
        !          6244:          func_error "AGE \`$age' is greater than the current interface number \`$current'"
        !          6245:          func_fatal_error "\`$vinfo' is not valid version information"
        !          6246:        fi
        !          6247: 
        !          6248:        # Calculate the version variables.
        !          6249:        major=
        !          6250:        versuffix=
        !          6251:        verstring=
        !          6252:        case $version_type in
        !          6253:        none) ;;
        !          6254: 
        !          6255:        darwin)
        !          6256:          # Like Linux, but with the current version available in
        !          6257:          # verstring for coding it into the library header
        !          6258:          func_arith $current - $age
        !          6259:          major=.$func_arith_result
        !          6260:          versuffix="$major.$age.$revision"
        !          6261:          # Darwin ld doesn't like 0 for these options...
        !          6262:          func_arith $current + 1
        !          6263:          minor_current=$func_arith_result
        !          6264:          xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
        !          6265:          verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
        !          6266:          ;;
        !          6267: 
        !          6268:        freebsd-aout)
        !          6269:          major=".$current"
        !          6270:          versuffix=".$current.$revision";
        !          6271:          ;;
        !          6272: 
        !          6273:        freebsd-elf)
        !          6274:          major=".$current"
        !          6275:          versuffix=".$current"
        !          6276:          ;;
        !          6277: 
        !          6278:        irix | nonstopux)
        !          6279:          if test "X$lt_irix_increment" = "Xno"; then
        !          6280:            func_arith $current - $age
        !          6281:          else
        !          6282:            func_arith $current - $age + 1
        !          6283:          fi
        !          6284:          major=$func_arith_result
        !          6285: 
        !          6286:          case $version_type in
        !          6287:            nonstopux) verstring_prefix=nonstopux ;;
        !          6288:            *)         verstring_prefix=sgi ;;
        !          6289:          esac
        !          6290:          verstring="$verstring_prefix$major.$revision"
        !          6291: 
        !          6292:          # Add in all the interfaces that we are compatible with.
        !          6293:          loop=$revision
        !          6294:          while test "$loop" -ne 0; do
        !          6295:            func_arith $revision - $loop
        !          6296:            iface=$func_arith_result
        !          6297:            func_arith $loop - 1
        !          6298:            loop=$func_arith_result
        !          6299:            verstring="$verstring_prefix$major.$iface:$verstring"
        !          6300:          done
        !          6301: 
        !          6302:          # Before this point, $major must not contain `.'.
        !          6303:          major=.$major
        !          6304:          versuffix="$major.$revision"
        !          6305:          ;;
        !          6306: 
        !          6307:        linux)
        !          6308:          func_arith $current - $age
        !          6309:          major=.$func_arith_result
        !          6310:          versuffix="$major.$age.$revision"
        !          6311:          ;;
        !          6312: 
        !          6313:        osf)
        !          6314:          func_arith $current - $age
        !          6315:          major=.$func_arith_result
        !          6316:          versuffix=".$current.$age.$revision"
        !          6317:          verstring="$current.$age.$revision"
        !          6318: 
        !          6319:          # Add in all the interfaces that we are compatible with.
        !          6320:          loop=$age
        !          6321:          while test "$loop" -ne 0; do
        !          6322:            func_arith $current - $loop
        !          6323:            iface=$func_arith_result
        !          6324:            func_arith $loop - 1
        !          6325:            loop=$func_arith_result
        !          6326:            verstring="$verstring:${iface}.0"
        !          6327:          done
        !          6328: 
        !          6329:          # Make executables depend on our current version.
        !          6330:          verstring="$verstring:${current}.0"
        !          6331:          ;;
        !          6332: 
        !          6333:        qnx)
        !          6334:          major=".$current"
        !          6335:          versuffix=".$current"
        !          6336:          ;;
        !          6337: 
        !          6338:        sunos)
        !          6339:          major=".$current"
        !          6340:          versuffix=".$current.$revision"
        !          6341:          ;;
        !          6342: 
        !          6343:        windows)
        !          6344:          # Use '-' rather than '.', since we only want one
        !          6345:          # extension on DOS 8.3 filesystems.
        !          6346:          func_arith $current - $age
        !          6347:          major=$func_arith_result
        !          6348:          versuffix="-$major"
        !          6349:          ;;
        !          6350: 
        !          6351:        *)
        !          6352:          func_fatal_configuration "unknown library version type \`$version_type'"
        !          6353:          ;;
        !          6354:        esac
        !          6355: 
        !          6356:        # Clear the version info if we defaulted, and they specified a release.
        !          6357:        if test -z "$vinfo" && test -n "$release"; then
        !          6358:          major=
        !          6359:          case $version_type in
        !          6360:          darwin)
        !          6361:            # we can't check for "0.0" in archive_cmds due to quoting
        !          6362:            # problems, so we reset it completely
        !          6363:            verstring=
        !          6364:            ;;
        !          6365:          *)
        !          6366:            verstring="0.0"
        !          6367:            ;;
        !          6368:          esac
        !          6369:          if test "$need_version" = no; then
        !          6370:            versuffix=
        !          6371:          else
        !          6372:            versuffix=".0.0"
        !          6373:          fi
        !          6374:        fi
        !          6375: 
        !          6376:        # Remove version info from name if versioning should be avoided
        !          6377:        if test "$avoid_version" = yes && test "$need_version" = no; then
        !          6378:          major=
        !          6379:          versuffix=
        !          6380:          verstring=""
        !          6381:        fi
        !          6382: 
        !          6383:        # Check to see if the archive will have undefined symbols.
        !          6384:        if test "$allow_undefined" = yes; then
        !          6385:          if test "$allow_undefined_flag" = unsupported; then
        !          6386:            func_warning "undefined symbols not allowed in $host shared libraries"
        !          6387:            build_libtool_libs=no
        !          6388:            build_old_libs=yes
        !          6389:          fi
        !          6390:        else
        !          6391:          # Don't allow undefined symbols.
        !          6392:          allow_undefined_flag="$no_undefined_flag"
        !          6393:        fi
        !          6394: 
        !          6395:       fi
        !          6396: 
        !          6397:       func_generate_dlsyms "$libname" "$libname" "yes"
        !          6398:       libobjs="$libobjs $symfileobj"
        !          6399:       test "X$libobjs" = "X " && libobjs=
        !          6400: 
        !          6401:       if test "$mode" != relink; then
        !          6402:        # Remove our outputs, but don't remove object files since they
        !          6403:        # may have been created when compiling PIC objects.
        !          6404:        removelist=
        !          6405:        tempremovelist=`$ECHO "$output_objdir/*"`
        !          6406:        for p in $tempremovelist; do
        !          6407:          case $p in
        !          6408:            *.$objext | *.gcno)
        !          6409:               ;;
        !          6410:            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
        !          6411:               if test "X$precious_files_regex" != "X"; then
        !          6412:                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
        !          6413:                 then
        !          6414:                   continue
        !          6415:                 fi
        !          6416:               fi
        !          6417:               removelist="$removelist $p"
        !          6418:               ;;
        !          6419:            *) ;;
        !          6420:          esac
        !          6421:        done
        !          6422:        test -n "$removelist" && \
        !          6423:          func_show_eval "${RM}r \$removelist"
        !          6424:       fi
        !          6425: 
        !          6426:       # Now set the variables for building old libraries.
        !          6427:       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
        !          6428:        oldlibs="$oldlibs $output_objdir/$libname.$libext"
        !          6429: 
        !          6430:        # Transform .lo files to .o files.
        !          6431:        oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
        !          6432:       fi
        !          6433: 
        !          6434:       # Eliminate all temporary directories.
        !          6435:       #for path in $notinst_path; do
        !          6436:       #        lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
        !          6437:       #        deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
        !          6438:       #        dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
        !          6439:       #done
        !          6440: 
        !          6441:       if test -n "$xrpath"; then
        !          6442:        # If the user specified any rpath flags, then add them.
        !          6443:        temp_xrpath=
        !          6444:        for libdir in $xrpath; do
        !          6445:          temp_xrpath="$temp_xrpath -R$libdir"
        !          6446:          case "$finalize_rpath " in
        !          6447:          *" $libdir "*) ;;
        !          6448:          *) finalize_rpath="$finalize_rpath $libdir" ;;
        !          6449:          esac
        !          6450:        done
        !          6451:        if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
        !          6452:          dependency_libs="$temp_xrpath $dependency_libs"
        !          6453:        fi
        !          6454:       fi
        !          6455: 
        !          6456:       # Make sure dlfiles contains only unique files that won't be dlpreopened
        !          6457:       old_dlfiles="$dlfiles"
        !          6458:       dlfiles=
        !          6459:       for lib in $old_dlfiles; do
        !          6460:        case " $dlprefiles $dlfiles " in
        !          6461:        *" $lib "*) ;;
        !          6462:        *) dlfiles="$dlfiles $lib" ;;
        !          6463:        esac
        !          6464:       done
        !          6465: 
        !          6466:       # Make sure dlprefiles contains only unique files
        !          6467:       old_dlprefiles="$dlprefiles"
        !          6468:       dlprefiles=
        !          6469:       for lib in $old_dlprefiles; do
        !          6470:        case "$dlprefiles " in
        !          6471:        *" $lib "*) ;;
        !          6472:        *) dlprefiles="$dlprefiles $lib" ;;
        !          6473:        esac
        !          6474:       done
        !          6475: 
        !          6476:       if test "$build_libtool_libs" = yes; then
        !          6477:        if test -n "$rpath"; then
        !          6478:          case $host in
        !          6479:          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
        !          6480:            # these systems don't actually have a c library (as such)!
        !          6481:            ;;
        !          6482:          *-*-rhapsody* | *-*-darwin1.[012])
        !          6483:            # Rhapsody C library is in the System framework
        !          6484:            deplibs="$deplibs System.ltframework"
        !          6485:            ;;
        !          6486:          *-*-netbsd*)
        !          6487:            # Don't link with libc until the a.out ld.so is fixed.
        !          6488:            ;;
        !          6489:          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
        !          6490:            # Do not include libc due to us having libc/libc_r.
        !          6491:            ;;
        !          6492:          *-*-sco3.2v5* | *-*-sco5v6*)
        !          6493:            # Causes problems with __ctype
        !          6494:            ;;
        !          6495:          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
        !          6496:            # Compiler inserts libc in the correct place for threads to work
        !          6497:            ;;
        !          6498:          *)
        !          6499:            # Add libc to deplibs on all other systems if necessary.
        !          6500:            if test "$build_libtool_need_lc" = "yes"; then
        !          6501:              deplibs="$deplibs -lc"
        !          6502:            fi
        !          6503:            ;;
        !          6504:          esac
        !          6505:        fi
        !          6506: 
        !          6507:        # Transform deplibs into only deplibs that can be linked in shared.
        !          6508:        name_save=$name
        !          6509:        libname_save=$libname
        !          6510:        release_save=$release
        !          6511:        versuffix_save=$versuffix
        !          6512:        major_save=$major
        !          6513:        # I'm not sure if I'm treating the release correctly.  I think
        !          6514:        # release should show up in the -l (ie -lgmp5) so we don't want to
        !          6515:        # add it in twice.  Is that correct?
        !          6516:        release=""
        !          6517:        versuffix=""
        !          6518:        major=""
        !          6519:        newdeplibs=
        !          6520:        droppeddeps=no
        !          6521:        case $deplibs_check_method in
        !          6522:        pass_all)
        !          6523:          # Don't check for shared/static.  Everything works.
        !          6524:          # This might be a little naive.  We might want to check
        !          6525:          # whether the library exists or not.  But this is on
        !          6526:          # osf3 & osf4 and I'm not really sure... Just
        !          6527:          # implementing what was already the behavior.
        !          6528:          newdeplibs=$deplibs
        !          6529:          ;;
        !          6530:        test_compile)
        !          6531:          # This code stresses the "libraries are programs" paradigm to its
        !          6532:          # limits. Maybe even breaks it.  We compile a program, linking it
        !          6533:          # against the deplibs as a proxy for the library.  Then we can check
        !          6534:          # whether they linked in statically or dynamically with ldd.
        !          6535:          $opt_dry_run || $RM conftest.c
        !          6536:          cat > conftest.c <<EOF
        !          6537:          int main() { return 0; }
        !          6538: EOF
        !          6539:          $opt_dry_run || $RM conftest
        !          6540:          if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
        !          6541:            ldd_output=`ldd conftest`
        !          6542:            for i in $deplibs; do
        !          6543:              case $i in
        !          6544:              -l*)
        !          6545:                func_stripname -l '' "$i"
        !          6546:                name=$func_stripname_result
        !          6547:                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          6548:                  case " $predeps $postdeps " in
        !          6549:                  *" $i "*)
        !          6550:                    newdeplibs="$newdeplibs $i"
        !          6551:                    i=""
        !          6552:                    ;;
        !          6553:                  esac
        !          6554:                fi
        !          6555:                if test -n "$i" ; then
        !          6556:                  libname=`eval "\\$ECHO \"$libname_spec\""`
        !          6557:                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
        !          6558:                  set dummy $deplib_matches; shift
        !          6559:                  deplib_match=$1
        !          6560:                  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
        !          6561:                    newdeplibs="$newdeplibs $i"
        !          6562:                  else
        !          6563:                    droppeddeps=yes
        !          6564:                    $ECHO
        !          6565:                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
        !          6566:                    $ECHO "*** I have the capability to make that library automatically link in when"
        !          6567:                    $ECHO "*** you link to this library.  But I can only do this if you have a"
        !          6568:                    $ECHO "*** shared version of the library, which I believe you do not have"
        !          6569:                    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
        !          6570:                    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
        !          6571:                  fi
        !          6572:                fi
        !          6573:                ;;
        !          6574:              *)
        !          6575:                newdeplibs="$newdeplibs $i"
        !          6576:                ;;
        !          6577:              esac
        !          6578:            done
        !          6579:          else
        !          6580:            # Error occurred in the first compile.  Let's try to salvage
        !          6581:            # the situation: Compile a separate program for each library.
        !          6582:            for i in $deplibs; do
        !          6583:              case $i in
        !          6584:              -l*)
        !          6585:                func_stripname -l '' "$i"
        !          6586:                name=$func_stripname_result
        !          6587:                $opt_dry_run || $RM conftest
        !          6588:                if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
        !          6589:                  ldd_output=`ldd conftest`
        !          6590:                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          6591:                    case " $predeps $postdeps " in
        !          6592:                    *" $i "*)
        !          6593:                      newdeplibs="$newdeplibs $i"
        !          6594:                      i=""
        !          6595:                      ;;
        !          6596:                    esac
        !          6597:                  fi
        !          6598:                  if test -n "$i" ; then
        !          6599:                    libname=`eval "\\$ECHO \"$libname_spec\""`
        !          6600:                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
        !          6601:                    set dummy $deplib_matches; shift
        !          6602:                    deplib_match=$1
        !          6603:                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
        !          6604:                      newdeplibs="$newdeplibs $i"
        !          6605:                    else
        !          6606:                      droppeddeps=yes
        !          6607:                      $ECHO
        !          6608:                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
        !          6609:                      $ECHO "*** I have the capability to make that library automatically link in when"
        !          6610:                      $ECHO "*** you link to this library.  But I can only do this if you have a"
        !          6611:                      $ECHO "*** shared version of the library, which you do not appear to have"
        !          6612:                      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
        !          6613:                      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
        !          6614:                    fi
        !          6615:                  fi
        !          6616:                else
        !          6617:                  droppeddeps=yes
        !          6618:                  $ECHO
        !          6619:                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
        !          6620:                  $ECHO "*** make it link in!  You will probably need to install it or some"
        !          6621:                  $ECHO "*** library that it depends on before this library will be fully"
        !          6622:                  $ECHO "*** functional.  Installing it before continuing would be even better."
        !          6623:                fi
        !          6624:                ;;
        !          6625:              *)
        !          6626:                newdeplibs="$newdeplibs $i"
        !          6627:                ;;
        !          6628:              esac
        !          6629:            done
        !          6630:          fi
        !          6631:          ;;
        !          6632:        file_magic*)
        !          6633:          set dummy $deplibs_check_method; shift
        !          6634:          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
        !          6635:          for a_deplib in $deplibs; do
        !          6636:            case $a_deplib in
        !          6637:            -l*)
        !          6638:              func_stripname -l '' "$a_deplib"
        !          6639:              name=$func_stripname_result
        !          6640:              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          6641:                case " $predeps $postdeps " in
        !          6642:                *" $a_deplib "*)
        !          6643:                  newdeplibs="$newdeplibs $a_deplib"
        !          6644:                  a_deplib=""
        !          6645:                  ;;
        !          6646:                esac
        !          6647:              fi
        !          6648:              if test -n "$a_deplib" ; then
        !          6649:                libname=`eval "\\$ECHO \"$libname_spec\""`
        !          6650:                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
        !          6651:                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
        !          6652:                  for potent_lib in $potential_libs; do
        !          6653:                      # Follow soft links.
        !          6654:                      if ls -lLd "$potent_lib" 2>/dev/null |
        !          6655:                         $GREP " -> " >/dev/null; then
        !          6656:                        continue
        !          6657:                      fi
        !          6658:                      # The statement above tries to avoid entering an
        !          6659:                      # endless loop below, in case of cyclic links.
        !          6660:                      # We might still enter an endless loop, since a link
        !          6661:                      # loop can be closed while we follow links,
        !          6662:                      # but so what?
        !          6663:                      potlib="$potent_lib"
        !          6664:                      while test -h "$potlib" 2>/dev/null; do
        !          6665:                        potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
        !          6666:                        case $potliblink in
        !          6667:                        [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
        !          6668:                        *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
        !          6669:                        esac
        !          6670:                      done
        !          6671:                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
        !          6672:                         $SED -e 10q |
        !          6673:                         $EGREP "$file_magic_regex" > /dev/null; then
        !          6674:                        newdeplibs="$newdeplibs $a_deplib"
        !          6675:                        a_deplib=""
        !          6676:                        break 2
        !          6677:                      fi
        !          6678:                  done
        !          6679:                done
        !          6680:              fi
        !          6681:              if test -n "$a_deplib" ; then
        !          6682:                droppeddeps=yes
        !          6683:                $ECHO
        !          6684:                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
        !          6685:                $ECHO "*** I have the capability to make that library automatically link in when"
        !          6686:                $ECHO "*** you link to this library.  But I can only do this if you have a"
        !          6687:                $ECHO "*** shared version of the library, which you do not appear to have"
        !          6688:                $ECHO "*** because I did check the linker path looking for a file starting"
        !          6689:                if test -z "$potlib" ; then
        !          6690:                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
        !          6691:                else
        !          6692:                  $ECHO "*** with $libname and none of the candidates passed a file format test"
        !          6693:                  $ECHO "*** using a file magic. Last file checked: $potlib"
        !          6694:                fi
        !          6695:              fi
        !          6696:              ;;
        !          6697:            *)
        !          6698:              # Add a -L argument.
        !          6699:              newdeplibs="$newdeplibs $a_deplib"
        !          6700:              ;;
        !          6701:            esac
        !          6702:          done # Gone through all deplibs.
        !          6703:          ;;
        !          6704:        match_pattern*)
        !          6705:          set dummy $deplibs_check_method; shift
        !          6706:          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
        !          6707:          for a_deplib in $deplibs; do
        !          6708:            case $a_deplib in
        !          6709:            -l*)
        !          6710:              func_stripname -l '' "$a_deplib"
        !          6711:              name=$func_stripname_result
        !          6712:              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          6713:                case " $predeps $postdeps " in
        !          6714:                *" $a_deplib "*)
        !          6715:                  newdeplibs="$newdeplibs $a_deplib"
        !          6716:                  a_deplib=""
        !          6717:                  ;;
        !          6718:                esac
        !          6719:              fi
        !          6720:              if test -n "$a_deplib" ; then
        !          6721:                libname=`eval "\\$ECHO \"$libname_spec\""`
        !          6722:                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
        !          6723:                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
        !          6724:                  for potent_lib in $potential_libs; do
        !          6725:                    potlib="$potent_lib" # see symlink-check above in file_magic test
        !          6726:                    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
        !          6727:                       $EGREP "$match_pattern_regex" > /dev/null; then
        !          6728:                      newdeplibs="$newdeplibs $a_deplib"
        !          6729:                      a_deplib=""
        !          6730:                      break 2
        !          6731:                    fi
        !          6732:                  done
        !          6733:                done
        !          6734:              fi
        !          6735:              if test -n "$a_deplib" ; then
        !          6736:                droppeddeps=yes
        !          6737:                $ECHO
        !          6738:                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
        !          6739:                $ECHO "*** I have the capability to make that library automatically link in when"
        !          6740:                $ECHO "*** you link to this library.  But I can only do this if you have a"
        !          6741:                $ECHO "*** shared version of the library, which you do not appear to have"
        !          6742:                $ECHO "*** because I did check the linker path looking for a file starting"
        !          6743:                if test -z "$potlib" ; then
        !          6744:                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
        !          6745:                else
        !          6746:                  $ECHO "*** with $libname and none of the candidates passed a file format test"
        !          6747:                  $ECHO "*** using a regex pattern. Last file checked: $potlib"
        !          6748:                fi
        !          6749:              fi
        !          6750:              ;;
        !          6751:            *)
        !          6752:              # Add a -L argument.
        !          6753:              newdeplibs="$newdeplibs $a_deplib"
        !          6754:              ;;
        !          6755:            esac
        !          6756:          done # Gone through all deplibs.
        !          6757:          ;;
        !          6758:        none | unknown | *)
        !          6759:          newdeplibs=""
        !          6760:          tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
        !          6761:              -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
        !          6762:          if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          6763:            for i in $predeps $postdeps ; do
        !          6764:              # can't use Xsed below, because $i might contain '/'
        !          6765:              tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
        !          6766:            done
        !          6767:          fi
        !          6768:          if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[      ]//g' |
        !          6769:             $GREP . >/dev/null; then
        !          6770:            $ECHO
        !          6771:            if test "X$deplibs_check_method" = "Xnone"; then
        !          6772:              $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
        !          6773:            else
        !          6774:              $ECHO "*** Warning: inter-library dependencies are not known to be supported."
        !          6775:            fi
        !          6776:            $ECHO "*** All declared inter-library dependencies are being dropped."
        !          6777:            droppeddeps=yes
        !          6778:          fi
        !          6779:          ;;
        !          6780:        esac
        !          6781:        versuffix=$versuffix_save
        !          6782:        major=$major_save
        !          6783:        release=$release_save
        !          6784:        libname=$libname_save
        !          6785:        name=$name_save
        !          6786: 
        !          6787:        case $host in
        !          6788:        *-*-rhapsody* | *-*-darwin1.[012])
        !          6789:          # On Rhapsody replace the C library with the System framework
        !          6790:          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
        !          6791:          ;;
        !          6792:        esac
        !          6793: 
        !          6794:        if test "$droppeddeps" = yes; then
        !          6795:          if test "$module" = yes; then
        !          6796:            $ECHO
        !          6797:            $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
        !          6798:            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
        !          6799:            $ECHO "*** a static module, that should work as long as the dlopening"
        !          6800:            $ECHO "*** application is linked with the -dlopen flag."
        !          6801:            if test -z "$global_symbol_pipe"; then
        !          6802:              $ECHO
        !          6803:              $ECHO "*** However, this would only work if libtool was able to extract symbol"
        !          6804:              $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
        !          6805:              $ECHO "*** not find such a program.  So, this module is probably useless."
        !          6806:              $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
        !          6807:            fi
        !          6808:            if test "$build_old_libs" = no; then
        !          6809:              oldlibs="$output_objdir/$libname.$libext"
        !          6810:              build_libtool_libs=module
        !          6811:              build_old_libs=yes
        !          6812:            else
        !          6813:              build_libtool_libs=no
        !          6814:            fi
        !          6815:          else
        !          6816:            $ECHO "*** The inter-library dependencies that have been dropped here will be"
        !          6817:            $ECHO "*** automatically added whenever a program is linked with this library"
        !          6818:            $ECHO "*** or is declared to -dlopen it."
        !          6819: 
        !          6820:            if test "$allow_undefined" = no; then
        !          6821:              $ECHO
        !          6822:              $ECHO "*** Since this library must not contain undefined symbols,"
        !          6823:              $ECHO "*** because either the platform does not support them or"
        !          6824:              $ECHO "*** it was explicitly requested with -no-undefined,"
        !          6825:              $ECHO "*** libtool will only create a static version of it."
        !          6826:              if test "$build_old_libs" = no; then
        !          6827:                oldlibs="$output_objdir/$libname.$libext"
        !          6828:                build_libtool_libs=module
        !          6829:                build_old_libs=yes
        !          6830:              else
        !          6831:                build_libtool_libs=no
        !          6832:              fi
        !          6833:            fi
        !          6834:          fi
        !          6835:        fi
        !          6836:        # Done checking deplibs!
        !          6837:        deplibs=$newdeplibs
        !          6838:       fi
        !          6839:       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
        !          6840:       case $host in
        !          6841:        *-*-darwin*)
        !          6842:          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          6843:          new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          6844:          deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          6845:          ;;
        !          6846:       esac
        !          6847: 
        !          6848:       # move library search paths that coincide with paths to not yet
        !          6849:       # installed libraries to the beginning of the library search list
        !          6850:       new_libs=
        !          6851:       for path in $notinst_path; do
        !          6852:        case " $new_libs " in
        !          6853:        *" -L$path/$objdir "*) ;;
        !          6854:        *)
        !          6855:          case " $deplibs " in
        !          6856:          *" -L$path/$objdir "*)
        !          6857:            new_libs="$new_libs -L$path/$objdir" ;;
        !          6858:          esac
        !          6859:          ;;
        !          6860:        esac
        !          6861:       done
        !          6862:       for deplib in $deplibs; do
        !          6863:        case $deplib in
        !          6864:        -L*)
        !          6865:          case " $new_libs " in
        !          6866:          *" $deplib "*) ;;
        !          6867:          *) new_libs="$new_libs $deplib" ;;
        !          6868:          esac
        !          6869:          ;;
        !          6870:        *) new_libs="$new_libs $deplib" ;;
        !          6871:        esac
        !          6872:       done
        !          6873:       deplibs="$new_libs"
        !          6874: 
        !          6875:       # All the library-specific variables (install_libdir is set above).
        !          6876:       library_names=
        !          6877:       old_library=
        !          6878:       dlname=
        !          6879: 
        !          6880:       # Test again, we may have decided not to build it any more
        !          6881:       if test "$build_libtool_libs" = yes; then
        !          6882:        if test "$hardcode_into_libs" = yes; then
        !          6883:          # Hardcode the library paths
        !          6884:          hardcode_libdirs=
        !          6885:          dep_rpath=
        !          6886:          rpath="$finalize_rpath"
        !          6887:          test "$mode" != relink && rpath="$compile_rpath$rpath"
        !          6888:          for libdir in $rpath; do
        !          6889:            if test -n "$hardcode_libdir_flag_spec"; then
        !          6890:              if test -n "$hardcode_libdir_separator"; then
        !          6891:                if test -z "$hardcode_libdirs"; then
        !          6892:                  hardcode_libdirs="$libdir"
        !          6893:                else
        !          6894:                  # Just accumulate the unique libdirs.
        !          6895:                  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
        !          6896:                  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
        !          6897:                    ;;
        !          6898:                  *)
        !          6899:                    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
        !          6900:                    ;;
        !          6901:                  esac
        !          6902:                fi
        !          6903:              else
        !          6904:                eval flag=\"$hardcode_libdir_flag_spec\"
        !          6905:                dep_rpath="$dep_rpath $flag"
        !          6906:              fi
        !          6907:            elif test -n "$runpath_var"; then
        !          6908:              case "$perm_rpath " in
        !          6909:              *" $libdir "*) ;;
        !          6910:              *) perm_rpath="$perm_rpath $libdir" ;;
        !          6911:              esac
        !          6912:            fi
        !          6913:          done
        !          6914:          # Substitute the hardcoded libdirs into the rpath.
        !          6915:          if test -n "$hardcode_libdir_separator" &&
        !          6916:             test -n "$hardcode_libdirs"; then
        !          6917:            libdir="$hardcode_libdirs"
        !          6918:            if test -n "$hardcode_libdir_flag_spec_ld"; then
        !          6919:              eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
        !          6920:            else
        !          6921:              eval dep_rpath=\"$hardcode_libdir_flag_spec\"
        !          6922:            fi
        !          6923:          fi
        !          6924:          if test -n "$runpath_var" && test -n "$perm_rpath"; then
        !          6925:            # We should set the runpath_var.
        !          6926:            rpath=
        !          6927:            for dir in $perm_rpath; do
        !          6928:              rpath="$rpath$dir:"
        !          6929:            done
        !          6930:            eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
        !          6931:          fi
        !          6932:          test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
        !          6933:        fi
        !          6934: 
        !          6935:        shlibpath="$finalize_shlibpath"
        !          6936:        test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
        !          6937:        if test -n "$shlibpath"; then
        !          6938:          eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
        !          6939:        fi
        !          6940: 
        !          6941:        # Get the real and link names of the library.
        !          6942:        eval shared_ext=\"$shrext_cmds\"
        !          6943:        eval library_names=\"$library_names_spec\"
        !          6944:        set dummy $library_names
        !          6945:        shift
        !          6946:        realname="$1"
        !          6947:        shift
        !          6948: 
        !          6949:        if test -n "$soname_spec"; then
        !          6950:          eval soname=\"$soname_spec\"
        !          6951:        else
        !          6952:          soname="$realname"
        !          6953:        fi
        !          6954:        if test -z "$dlname"; then
        !          6955:          dlname=$soname
        !          6956:        fi
        !          6957: 
        !          6958:        lib="$output_objdir/$realname"
        !          6959:        linknames=
        !          6960:        for link
        !          6961:        do
        !          6962:          linknames="$linknames $link"
        !          6963:        done
        !          6964: 
        !          6965:        # Use standard objects if they are pic
        !          6966:        test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
        !          6967:        test "X$libobjs" = "X " && libobjs=
        !          6968: 
        !          6969:        delfiles=
        !          6970:        if test -n "$export_symbols" && test -n "$include_expsyms"; then
        !          6971:          $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
        !          6972:          export_symbols="$output_objdir/$libname.uexp"
        !          6973:          delfiles="$delfiles $export_symbols"
        !          6974:        fi
        !          6975: 
        !          6976:        orig_export_symbols=
        !          6977:        case $host_os in
        !          6978:        cygwin* | mingw* | cegcc*)
        !          6979:          if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
        !          6980:            # exporting using user supplied symfile
        !          6981:            if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
        !          6982:              # and it's NOT already a .def file. Must figure out
        !          6983:              # which of the given symbols are data symbols and tag
        !          6984:              # them as such. So, trigger use of export_symbols_cmds.
        !          6985:              # export_symbols gets reassigned inside the "prepare
        !          6986:              # the list of exported symbols" if statement, so the
        !          6987:              # include_expsyms logic still works.
        !          6988:              orig_export_symbols="$export_symbols"
        !          6989:              export_symbols=
        !          6990:              always_export_symbols=yes
        !          6991:            fi
        !          6992:          fi
        !          6993:          ;;
        !          6994:        esac
        !          6995: 
        !          6996:        # Prepare the list of exported symbols
        !          6997:        if test -z "$export_symbols"; then
        !          6998:          if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
        !          6999:            func_verbose "generating symbol list for \`$libname.la'"
        !          7000:            export_symbols="$output_objdir/$libname.exp"
        !          7001:            $opt_dry_run || $RM $export_symbols
        !          7002:            cmds=$export_symbols_cmds
        !          7003:            save_ifs="$IFS"; IFS='~'
        !          7004:            for cmd in $cmds; do
        !          7005:              IFS="$save_ifs"
        !          7006:              eval cmd=\"$cmd\"
        !          7007:              func_len " $cmd"
        !          7008:              len=$func_len_result
        !          7009:              if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
        !          7010:                func_show_eval "$cmd" 'exit $?'
        !          7011:                skipped_export=false
        !          7012:              else
        !          7013:                # The command line is too long to execute in one step.
        !          7014:                func_verbose "using reloadable object file for export list..."
        !          7015:                skipped_export=:
        !          7016:                # Break out early, otherwise skipped_export may be
        !          7017:                # set to false by a later but shorter cmd.
        !          7018:                break
        !          7019:              fi
        !          7020:            done
        !          7021:            IFS="$save_ifs"
        !          7022:            if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
        !          7023:              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
        !          7024:              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
        !          7025:            fi
        !          7026:          fi
        !          7027:        fi
        !          7028: 
        !          7029:        if test -n "$export_symbols" && test -n "$include_expsyms"; then
        !          7030:          tmp_export_symbols="$export_symbols"
        !          7031:          test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
        !          7032:          $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
        !          7033:        fi
        !          7034: 
        !          7035:        if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
        !          7036:          # The given exports_symbols file has to be filtered, so filter it.
        !          7037:          func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
        !          7038:          # FIXME: $output_objdir/$libname.filter potentially contains lots of
        !          7039:          # 's' commands which not all seds can handle. GNU sed should be fine
        !          7040:          # though. Also, the filter scales superlinearly with the number of
        !          7041:          # global variables. join(1) would be nice here, but unfortunately
        !          7042:          # isn't a blessed tool.
        !          7043:          $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
        !          7044:          delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
        !          7045:          export_symbols=$output_objdir/$libname.def
        !          7046:          $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
        !          7047:        fi
        !          7048: 
        !          7049:        tmp_deplibs=
        !          7050:        for test_deplib in $deplibs; do
        !          7051:          case " $convenience " in
        !          7052:          *" $test_deplib "*) ;;
        !          7053:          *)
        !          7054:            tmp_deplibs="$tmp_deplibs $test_deplib"
        !          7055:            ;;
        !          7056:          esac
        !          7057:        done
        !          7058:        deplibs="$tmp_deplibs"
        !          7059: 
        !          7060:        if test -n "$convenience"; then
        !          7061:          if test -n "$whole_archive_flag_spec" &&
        !          7062:            test "$compiler_needs_object" = yes &&
        !          7063:            test -z "$libobjs"; then
        !          7064:            # extract the archives, so we have objects to list.
        !          7065:            # TODO: could optimize this to just extract one archive.
        !          7066:            whole_archive_flag_spec=
        !          7067:          fi
        !          7068:          if test -n "$whole_archive_flag_spec"; then
        !          7069:            save_libobjs=$libobjs
        !          7070:            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
        !          7071:            test "X$libobjs" = "X " && libobjs=
        !          7072:          else
        !          7073:            gentop="$output_objdir/${outputname}x"
        !          7074:            generated="$generated $gentop"
        !          7075: 
        !          7076:            func_extract_archives $gentop $convenience
        !          7077:            libobjs="$libobjs $func_extract_archives_result"
        !          7078:            test "X$libobjs" = "X " && libobjs=
        !          7079:          fi
        !          7080:        fi
        !          7081: 
        !          7082:        if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
        !          7083:          eval flag=\"$thread_safe_flag_spec\"
        !          7084:          linker_flags="$linker_flags $flag"
        !          7085:        fi
        !          7086: 
        !          7087:        # Make a backup of the uninstalled library when relinking
        !          7088:        if test "$mode" = relink; then
        !          7089:          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
        !          7090:        fi
        !          7091: 
        !          7092:        # Do each of the archive commands.
        !          7093:        if test "$module" = yes && test -n "$module_cmds" ; then
        !          7094:          if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
        !          7095:            eval test_cmds=\"$module_expsym_cmds\"
        !          7096:            cmds=$module_expsym_cmds
        !          7097:          else
        !          7098:            eval test_cmds=\"$module_cmds\"
        !          7099:            cmds=$module_cmds
        !          7100:          fi
        !          7101:        else
        !          7102:          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
        !          7103:            eval test_cmds=\"$archive_expsym_cmds\"
        !          7104:            cmds=$archive_expsym_cmds
        !          7105:          else
        !          7106:            eval test_cmds=\"$archive_cmds\"
        !          7107:            cmds=$archive_cmds
        !          7108:          fi
        !          7109:        fi
        !          7110: 
        !          7111:        if test "X$skipped_export" != "X:" &&
        !          7112:           func_len " $test_cmds" &&
        !          7113:           len=$func_len_result &&
        !          7114:           test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
        !          7115:          :
        !          7116:        else
        !          7117:          # The command line is too long to link in one step, link piecewise
        !          7118:          # or, if using GNU ld and skipped_export is not :, use a linker
        !          7119:          # script.
        !          7120: 
        !          7121:          # Save the value of $output and $libobjs because we want to
        !          7122:          # use them later.  If we have whole_archive_flag_spec, we
        !          7123:          # want to use save_libobjs as it was before
        !          7124:          # whole_archive_flag_spec was expanded, because we can't
        !          7125:          # assume the linker understands whole_archive_flag_spec.
        !          7126:          # This may have to be revisited, in case too many
        !          7127:          # convenience libraries get linked in and end up exceeding
        !          7128:          # the spec.
        !          7129:          if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
        !          7130:            save_libobjs=$libobjs
        !          7131:          fi
        !          7132:          save_output=$output
        !          7133:          output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
        !          7134: 
        !          7135:          # Clear the reloadable object creation command queue and
        !          7136:          # initialize k to one.
        !          7137:          test_cmds=
        !          7138:          concat_cmds=
        !          7139:          objlist=
        !          7140:          last_robj=
        !          7141:          k=1
        !          7142: 
        !          7143:          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
        !          7144:            output=${output_objdir}/${output_la}.lnkscript
        !          7145:            func_verbose "creating GNU ld script: $output"
        !          7146:            $ECHO 'INPUT (' > $output
        !          7147:            for obj in $save_libobjs
        !          7148:            do
        !          7149:              $ECHO "$obj" >> $output
        !          7150:            done
        !          7151:            $ECHO ')' >> $output
        !          7152:            delfiles="$delfiles $output"
        !          7153:          elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
        !          7154:            output=${output_objdir}/${output_la}.lnk
        !          7155:            func_verbose "creating linker input file list: $output"
        !          7156:            : > $output
        !          7157:            set x $save_libobjs
        !          7158:            shift
        !          7159:            firstobj=
        !          7160:            if test "$compiler_needs_object" = yes; then
        !          7161:              firstobj="$1 "
        !          7162:              shift
        !          7163:            fi
        !          7164:            for obj
        !          7165:            do
        !          7166:              $ECHO "$obj" >> $output
        !          7167:            done
        !          7168:            delfiles="$delfiles $output"
        !          7169:            output=$firstobj\"$file_list_spec$output\"
        !          7170:          else
        !          7171:            if test -n "$save_libobjs"; then
        !          7172:              func_verbose "creating reloadable object files..."
        !          7173:              output=$output_objdir/$output_la-${k}.$objext
        !          7174:              eval test_cmds=\"$reload_cmds\"
        !          7175:              func_len " $test_cmds"
        !          7176:              len0=$func_len_result
        !          7177:              len=$len0
        !          7178: 
        !          7179:              # Loop over the list of objects to be linked.
        !          7180:              for obj in $save_libobjs
        !          7181:              do
        !          7182:                func_len " $obj"
        !          7183:                func_arith $len + $func_len_result
        !          7184:                len=$func_arith_result
        !          7185:                if test "X$objlist" = X ||
        !          7186:                   test "$len" -lt "$max_cmd_len"; then
        !          7187:                  func_append objlist " $obj"
        !          7188:                else
        !          7189:                  # The command $test_cmds is almost too long, add a
        !          7190:                  # command to the queue.
        !          7191:                  if test "$k" -eq 1 ; then
        !          7192:                    # The first file doesn't have a previous command to add.
        !          7193:                    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
        !          7194:                  else
        !          7195:                    # All subsequent reloadable object files will link in
        !          7196:                    # the last one created.
        !          7197:                    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
        !          7198:                  fi
        !          7199:                  last_robj=$output_objdir/$output_la-${k}.$objext
        !          7200:                  func_arith $k + 1
        !          7201:                  k=$func_arith_result
        !          7202:                  output=$output_objdir/$output_la-${k}.$objext
        !          7203:                  objlist=$obj
        !          7204:                  func_len " $last_robj"
        !          7205:                  func_arith $len0 + $func_len_result
        !          7206:                  len=$func_arith_result
        !          7207:                fi
        !          7208:              done
        !          7209:              # Handle the remaining objects by creating one last
        !          7210:              # reloadable object file.  All subsequent reloadable object
        !          7211:              # files will link in the last one created.
        !          7212:              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
        !          7213:              eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
        !          7214:              if test -n "$last_robj"; then
        !          7215:                eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
        !          7216:              fi
        !          7217:              delfiles="$delfiles $output"
        !          7218: 
        !          7219:            else
        !          7220:              output=
        !          7221:            fi
        !          7222: 
        !          7223:            if ${skipped_export-false}; then
        !          7224:              func_verbose "generating symbol list for \`$libname.la'"
        !          7225:              export_symbols="$output_objdir/$libname.exp"
        !          7226:              $opt_dry_run || $RM $export_symbols
        !          7227:              libobjs=$output
        !          7228:              # Append the command to create the export file.
        !          7229:              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
        !          7230:              eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
        !          7231:              if test -n "$last_robj"; then
        !          7232:                eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
        !          7233:              fi
        !          7234:            fi
        !          7235: 
        !          7236:            test -n "$save_libobjs" &&
        !          7237:              func_verbose "creating a temporary reloadable object file: $output"
        !          7238: 
        !          7239:            # Loop through the commands generated above and execute them.
        !          7240:            save_ifs="$IFS"; IFS='~'
        !          7241:            for cmd in $concat_cmds; do
        !          7242:              IFS="$save_ifs"
        !          7243:              $opt_silent || {
        !          7244:                  func_quote_for_expand "$cmd"
        !          7245:                  eval "func_echo $func_quote_for_expand_result"
        !          7246:              }
        !          7247:              $opt_dry_run || eval "$cmd" || {
        !          7248:                lt_exit=$?
        !          7249: 
        !          7250:                # Restore the uninstalled library and exit
        !          7251:                if test "$mode" = relink; then
        !          7252:                  ( cd "$output_objdir" && \
        !          7253:                    $RM "${realname}T" && \
        !          7254:                    $MV "${realname}U" "$realname" )
        !          7255:                fi
        !          7256: 
        !          7257:                exit $lt_exit
        !          7258:              }
        !          7259:            done
        !          7260:            IFS="$save_ifs"
        !          7261: 
        !          7262:            if test -n "$export_symbols_regex" && ${skipped_export-false}; then
        !          7263:              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
        !          7264:              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
        !          7265:            fi
        !          7266:          fi
        !          7267: 
        !          7268:           if ${skipped_export-false}; then
        !          7269:            if test -n "$export_symbols" && test -n "$include_expsyms"; then
        !          7270:              tmp_export_symbols="$export_symbols"
        !          7271:              test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
        !          7272:              $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
        !          7273:            fi
        !          7274: 
        !          7275:            if test -n "$orig_export_symbols"; then
        !          7276:              # The given exports_symbols file has to be filtered, so filter it.
        !          7277:              func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
        !          7278:              # FIXME: $output_objdir/$libname.filter potentially contains lots of
        !          7279:              # 's' commands which not all seds can handle. GNU sed should be fine
        !          7280:              # though. Also, the filter scales superlinearly with the number of
        !          7281:              # global variables. join(1) would be nice here, but unfortunately
        !          7282:              # isn't a blessed tool.
        !          7283:              $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
        !          7284:              delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
        !          7285:              export_symbols=$output_objdir/$libname.def
        !          7286:              $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
        !          7287:            fi
        !          7288:          fi
        !          7289: 
        !          7290:          libobjs=$output
        !          7291:          # Restore the value of output.
        !          7292:          output=$save_output
        !          7293: 
        !          7294:          if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
        !          7295:            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
        !          7296:            test "X$libobjs" = "X " && libobjs=
        !          7297:          fi
        !          7298:          # Expand the library linking commands again to reset the
        !          7299:          # value of $libobjs for piecewise linking.
        !          7300: 
        !          7301:          # Do each of the archive commands.
        !          7302:          if test "$module" = yes && test -n "$module_cmds" ; then
        !          7303:            if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
        !          7304:              cmds=$module_expsym_cmds
        !          7305:            else
        !          7306:              cmds=$module_cmds
        !          7307:            fi
        !          7308:          else
        !          7309:            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
        !          7310:              cmds=$archive_expsym_cmds
        !          7311:            else
        !          7312:              cmds=$archive_cmds
        !          7313:            fi
        !          7314:          fi
        !          7315:        fi
        !          7316: 
        !          7317:        if test -n "$delfiles"; then
        !          7318:          # Append the command to remove temporary files to $cmds.
        !          7319:          eval cmds=\"\$cmds~\$RM $delfiles\"
        !          7320:        fi
        !          7321: 
        !          7322:        # Add any objects from preloaded convenience libraries
        !          7323:        if test -n "$dlprefiles"; then
        !          7324:          gentop="$output_objdir/${outputname}x"
        !          7325:          generated="$generated $gentop"
        !          7326: 
        !          7327:          func_extract_archives $gentop $dlprefiles
        !          7328:          libobjs="$libobjs $func_extract_archives_result"
        !          7329:          test "X$libobjs" = "X " && libobjs=
        !          7330:        fi
        !          7331: 
        !          7332:        save_ifs="$IFS"; IFS='~'
        !          7333:        for cmd in $cmds; do
        !          7334:          IFS="$save_ifs"
        !          7335:          eval cmd=\"$cmd\"
        !          7336:          $opt_silent || {
        !          7337:            func_quote_for_expand "$cmd"
        !          7338:            eval "func_echo $func_quote_for_expand_result"
        !          7339:          }
        !          7340:          $opt_dry_run || eval "$cmd" || {
        !          7341:            lt_exit=$?
        !          7342: 
        !          7343:            # Restore the uninstalled library and exit
        !          7344:            if test "$mode" = relink; then
        !          7345:              ( cd "$output_objdir" && \
        !          7346:                $RM "${realname}T" && \
        !          7347:                $MV "${realname}U" "$realname" )
        !          7348:            fi
        !          7349: 
        !          7350:            exit $lt_exit
        !          7351:          }
        !          7352:        done
        !          7353:        IFS="$save_ifs"
        !          7354: 
        !          7355:        # Restore the uninstalled library and exit
        !          7356:        if test "$mode" = relink; then
        !          7357:          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
        !          7358: 
        !          7359:          if test -n "$convenience"; then
        !          7360:            if test -z "$whole_archive_flag_spec"; then
        !          7361:              func_show_eval '${RM}r "$gentop"'
        !          7362:            fi
        !          7363:          fi
        !          7364: 
        !          7365:          exit $EXIT_SUCCESS
        !          7366:        fi
        !          7367: 
        !          7368:        # Create links to the real library.
        !          7369:        for linkname in $linknames; do
        !          7370:          if test "$realname" != "$linkname"; then
        !          7371:            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
        !          7372:          fi
        !          7373:        done
        !          7374: 
        !          7375:        # If -module or -export-dynamic was specified, set the dlname.
        !          7376:        if test "$module" = yes || test "$export_dynamic" = yes; then
        !          7377:          # On all known operating systems, these are identical.
        !          7378:          dlname="$soname"
        !          7379:        fi
        !          7380:       fi
        !          7381:       ;;
        !          7382: 
        !          7383:     obj)
        !          7384:       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        !          7385:        func_warning "\`-dlopen' is ignored for objects"
        !          7386:       fi
        !          7387: 
        !          7388:       case " $deplibs" in
        !          7389:       *\ -l* | *\ -L*)
        !          7390:        func_warning "\`-l' and \`-L' are ignored for objects" ;;
        !          7391:       esac
        !          7392: 
        !          7393:       test -n "$rpath" && \
        !          7394:        func_warning "\`-rpath' is ignored for objects"
        !          7395: 
        !          7396:       test -n "$xrpath" && \
        !          7397:        func_warning "\`-R' is ignored for objects"
        !          7398: 
        !          7399:       test -n "$vinfo" && \
        !          7400:        func_warning "\`-version-info' is ignored for objects"
        !          7401: 
        !          7402:       test -n "$release" && \
        !          7403:        func_warning "\`-release' is ignored for objects"
        !          7404: 
        !          7405:       case $output in
        !          7406:       *.lo)
        !          7407:        test -n "$objs$old_deplibs" && \
        !          7408:          func_fatal_error "cannot build library object \`$output' from non-libtool objects"
        !          7409: 
        !          7410:        libobj=$output
        !          7411:        func_lo2o "$libobj"
        !          7412:        obj=$func_lo2o_result
        !          7413:        ;;
        !          7414:       *)
        !          7415:        libobj=
        !          7416:        obj="$output"
        !          7417:        ;;
        !          7418:       esac
        !          7419: 
        !          7420:       # Delete the old objects.
        !          7421:       $opt_dry_run || $RM $obj $libobj
        !          7422: 
        !          7423:       # Objects from convenience libraries.  This assumes
        !          7424:       # single-version convenience libraries.  Whenever we create
        !          7425:       # different ones for PIC/non-PIC, this we'll have to duplicate
        !          7426:       # the extraction.
        !          7427:       reload_conv_objs=
        !          7428:       gentop=
        !          7429:       # reload_cmds runs $LD directly, so let us get rid of
        !          7430:       # -Wl from whole_archive_flag_spec and hope we can get by with
        !          7431:       # turning comma into space..
        !          7432:       wl=
        !          7433: 
        !          7434:       if test -n "$convenience"; then
        !          7435:        if test -n "$whole_archive_flag_spec"; then
        !          7436:          eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
        !          7437:          reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
        !          7438:        else
        !          7439:          gentop="$output_objdir/${obj}x"
        !          7440:          generated="$generated $gentop"
        !          7441: 
        !          7442:          func_extract_archives $gentop $convenience
        !          7443:          reload_conv_objs="$reload_objs $func_extract_archives_result"
        !          7444:        fi
        !          7445:       fi
        !          7446: 
        !          7447:       # Create the old-style object.
        !          7448:       reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
        !          7449: 
        !          7450:       output="$obj"
        !          7451:       func_execute_cmds "$reload_cmds" 'exit $?'
        !          7452: 
        !          7453:       # Exit if we aren't doing a library object file.
        !          7454:       if test -z "$libobj"; then
        !          7455:        if test -n "$gentop"; then
        !          7456:          func_show_eval '${RM}r "$gentop"'
        !          7457:        fi
        !          7458: 
        !          7459:        exit $EXIT_SUCCESS
        !          7460:       fi
        !          7461: 
        !          7462:       if test "$build_libtool_libs" != yes; then
        !          7463:        if test -n "$gentop"; then
        !          7464:          func_show_eval '${RM}r "$gentop"'
        !          7465:        fi
        !          7466: 
        !          7467:        # Create an invalid libtool object if no PIC, so that we don't
        !          7468:        # accidentally link it into a program.
        !          7469:        # $show "echo timestamp > $libobj"
        !          7470:        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
        !          7471:        exit $EXIT_SUCCESS
        !          7472:       fi
        !          7473: 
        !          7474:       if test -n "$pic_flag" || test "$pic_mode" != default; then
        !          7475:        # Only do commands if we really have different PIC objects.
        !          7476:        reload_objs="$libobjs $reload_conv_objs"
        !          7477:        output="$libobj"
        !          7478:        func_execute_cmds "$reload_cmds" 'exit $?'
        !          7479:       fi
        !          7480: 
        !          7481:       if test -n "$gentop"; then
        !          7482:        func_show_eval '${RM}r "$gentop"'
        !          7483:       fi
        !          7484: 
        !          7485:       exit $EXIT_SUCCESS
        !          7486:       ;;
        !          7487: 
        !          7488:     prog)
        !          7489:       case $host in
        !          7490:        *cygwin*) func_stripname '' '.exe' "$output"
        !          7491:                  output=$func_stripname_result.exe;;
        !          7492:       esac
        !          7493:       test -n "$vinfo" && \
        !          7494:        func_warning "\`-version-info' is ignored for programs"
        !          7495: 
        !          7496:       test -n "$release" && \
        !          7497:        func_warning "\`-release' is ignored for programs"
        !          7498: 
        !          7499:       test "$preload" = yes \
        !          7500:         && test "$dlopen_support" = unknown \
        !          7501:        && test "$dlopen_self" = unknown \
        !          7502:        && test "$dlopen_self_static" = unknown && \
        !          7503:          func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
        !          7504: 
        !          7505:       case $host in
        !          7506:       *-*-rhapsody* | *-*-darwin1.[012])
        !          7507:        # On Rhapsody replace the C library is the System framework
        !          7508:        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
        !          7509:        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
        !          7510:        ;;
        !          7511:       esac
        !          7512: 
        !          7513:       case $host in
        !          7514:       *-*-darwin*)
        !          7515:        # Don't allow lazy linking, it breaks C++ global constructors
        !          7516:        # But is supposedly fixed on 10.4 or later (yay!).
        !          7517:        if test "$tagname" = CXX ; then
        !          7518:          case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
        !          7519:            10.[0123])
        !          7520:              compile_command="$compile_command ${wl}-bind_at_load"
        !          7521:              finalize_command="$finalize_command ${wl}-bind_at_load"
        !          7522:            ;;
        !          7523:          esac
        !          7524:        fi
        !          7525:        # Time to change all our "foo.ltframework" stuff back to "-framework foo"
        !          7526:        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          7527:        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          7528:        ;;
        !          7529:       esac
        !          7530: 
        !          7531: 
        !          7532:       # move library search paths that coincide with paths to not yet
        !          7533:       # installed libraries to the beginning of the library search list
        !          7534:       new_libs=
        !          7535:       for path in $notinst_path; do
        !          7536:        case " $new_libs " in
        !          7537:        *" -L$path/$objdir "*) ;;
        !          7538:        *)
        !          7539:          case " $compile_deplibs " in
        !          7540:          *" -L$path/$objdir "*)
        !          7541:            new_libs="$new_libs -L$path/$objdir" ;;
        !          7542:          esac
        !          7543:          ;;
        !          7544:        esac
        !          7545:       done
        !          7546:       for deplib in $compile_deplibs; do
        !          7547:        case $deplib in
        !          7548:        -L*)
        !          7549:          case " $new_libs " in
        !          7550:          *" $deplib "*) ;;
        !          7551:          *) new_libs="$new_libs $deplib" ;;
        !          7552:          esac
        !          7553:          ;;
        !          7554:        *) new_libs="$new_libs $deplib" ;;
        !          7555:        esac
        !          7556:       done
        !          7557:       compile_deplibs="$new_libs"
        !          7558: 
        !          7559: 
        !          7560:       compile_command="$compile_command $compile_deplibs"
        !          7561:       finalize_command="$finalize_command $finalize_deplibs"
        !          7562: 
        !          7563:       if test -n "$rpath$xrpath"; then
        !          7564:        # If the user specified any rpath flags, then add them.
        !          7565:        for libdir in $rpath $xrpath; do
        !          7566:          # This is the magic to use -rpath.
        !          7567:          case "$finalize_rpath " in
        !          7568:          *" $libdir "*) ;;
        !          7569:          *) finalize_rpath="$finalize_rpath $libdir" ;;
        !          7570:          esac
        !          7571:        done
        !          7572:       fi
        !          7573: 
        !          7574:       # Now hardcode the library paths
        !          7575:       rpath=
        !          7576:       hardcode_libdirs=
        !          7577:       for libdir in $compile_rpath $finalize_rpath; do
        !          7578:        if test -n "$hardcode_libdir_flag_spec"; then
        !          7579:          if test -n "$hardcode_libdir_separator"; then
        !          7580:            if test -z "$hardcode_libdirs"; then
        !          7581:              hardcode_libdirs="$libdir"
        !          7582:            else
        !          7583:              # Just accumulate the unique libdirs.
        !          7584:              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
        !          7585:              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
        !          7586:                ;;
        !          7587:              *)
        !          7588:                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
        !          7589:                ;;
        !          7590:              esac
        !          7591:            fi
        !          7592:          else
        !          7593:            eval flag=\"$hardcode_libdir_flag_spec\"
        !          7594:            rpath="$rpath $flag"
        !          7595:          fi
        !          7596:        elif test -n "$runpath_var"; then
        !          7597:          case "$perm_rpath " in
        !          7598:          *" $libdir "*) ;;
        !          7599:          *) perm_rpath="$perm_rpath $libdir" ;;
        !          7600:          esac
        !          7601:        fi
        !          7602:        case $host in
        !          7603:        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
        !          7604:          testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
        !          7605:          case :$dllsearchpath: in
        !          7606:          *":$libdir:"*) ;;
        !          7607:          ::) dllsearchpath=$libdir;;
        !          7608:          *) dllsearchpath="$dllsearchpath:$libdir";;
        !          7609:          esac
        !          7610:          case :$dllsearchpath: in
        !          7611:          *":$testbindir:"*) ;;
        !          7612:          ::) dllsearchpath=$testbindir;;
        !          7613:          *) dllsearchpath="$dllsearchpath:$testbindir";;
        !          7614:          esac
        !          7615:          ;;
        !          7616:        esac
        !          7617:       done
        !          7618:       # Substitute the hardcoded libdirs into the rpath.
        !          7619:       if test -n "$hardcode_libdir_separator" &&
        !          7620:         test -n "$hardcode_libdirs"; then
        !          7621:        libdir="$hardcode_libdirs"
        !          7622:        eval rpath=\" $hardcode_libdir_flag_spec\"
        !          7623:       fi
        !          7624:       compile_rpath="$rpath"
        !          7625: 
        !          7626:       rpath=
        !          7627:       hardcode_libdirs=
        !          7628:       for libdir in $finalize_rpath; do
        !          7629:        if test -n "$hardcode_libdir_flag_spec"; then
        !          7630:          if test -n "$hardcode_libdir_separator"; then
        !          7631:            if test -z "$hardcode_libdirs"; then
        !          7632:              hardcode_libdirs="$libdir"
        !          7633:            else
        !          7634:              # Just accumulate the unique libdirs.
        !          7635:              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
        !          7636:              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
        !          7637:                ;;
        !          7638:              *)
        !          7639:                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
        !          7640:                ;;
        !          7641:              esac
        !          7642:            fi
        !          7643:          else
        !          7644:            eval flag=\"$hardcode_libdir_flag_spec\"
        !          7645:            rpath="$rpath $flag"
        !          7646:          fi
        !          7647:        elif test -n "$runpath_var"; then
        !          7648:          case "$finalize_perm_rpath " in
        !          7649:          *" $libdir "*) ;;
        !          7650:          *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
        !          7651:          esac
        !          7652:        fi
        !          7653:       done
        !          7654:       # Substitute the hardcoded libdirs into the rpath.
        !          7655:       if test -n "$hardcode_libdir_separator" &&
        !          7656:         test -n "$hardcode_libdirs"; then
        !          7657:        libdir="$hardcode_libdirs"
        !          7658:        eval rpath=\" $hardcode_libdir_flag_spec\"
        !          7659:       fi
        !          7660:       finalize_rpath="$rpath"
        !          7661: 
        !          7662:       if test -n "$libobjs" && test "$build_old_libs" = yes; then
        !          7663:        # Transform all the library objects into standard objects.
        !          7664:        compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
        !          7665:        finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
        !          7666:       fi
        !          7667: 
        !          7668:       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
        !          7669: 
        !          7670:       # template prelinking step
        !          7671:       if test -n "$prelink_cmds"; then
        !          7672:        func_execute_cmds "$prelink_cmds" 'exit $?'
        !          7673:       fi
        !          7674: 
        !          7675:       wrappers_required=yes
        !          7676:       case $host in
        !          7677:       *cygwin* | *mingw* )
        !          7678:         if test "$build_libtool_libs" != yes; then
        !          7679:           wrappers_required=no
        !          7680:         fi
        !          7681:         ;;
        !          7682:       *cegcc)
        !          7683:         # Disable wrappers for cegcc, we are cross compiling anyway.
        !          7684:         wrappers_required=no
        !          7685:         ;;
        !          7686:       *)
        !          7687:         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
        !          7688:           wrappers_required=no
        !          7689:         fi
        !          7690:         ;;
        !          7691:       esac
        !          7692:       if test "$wrappers_required" = no; then
        !          7693:        # Replace the output file specification.
        !          7694:        compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
        !          7695:        link_command="$compile_command$compile_rpath"
        !          7696: 
        !          7697:        # We have no uninstalled library dependencies, so finalize right now.
        !          7698:        exit_status=0
        !          7699:        func_show_eval "$link_command" 'exit_status=$?'
        !          7700: 
        !          7701:        # Delete the generated files.
        !          7702:        if test -f "$output_objdir/${outputname}S.${objext}"; then
        !          7703:          func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
        !          7704:        fi
        !          7705: 
        !          7706:        exit $exit_status
        !          7707:       fi
        !          7708: 
        !          7709:       if test -n "$compile_shlibpath$finalize_shlibpath"; then
        !          7710:        compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
        !          7711:       fi
        !          7712:       if test -n "$finalize_shlibpath"; then
        !          7713:        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
        !          7714:       fi
        !          7715: 
        !          7716:       compile_var=
        !          7717:       finalize_var=
        !          7718:       if test -n "$runpath_var"; then
        !          7719:        if test -n "$perm_rpath"; then
        !          7720:          # We should set the runpath_var.
        !          7721:          rpath=
        !          7722:          for dir in $perm_rpath; do
        !          7723:            rpath="$rpath$dir:"
        !          7724:          done
        !          7725:          compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
        !          7726:        fi
        !          7727:        if test -n "$finalize_perm_rpath"; then
        !          7728:          # We should set the runpath_var.
        !          7729:          rpath=
        !          7730:          for dir in $finalize_perm_rpath; do
        !          7731:            rpath="$rpath$dir:"
        !          7732:          done
        !          7733:          finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
        !          7734:        fi
        !          7735:       fi
        !          7736: 
        !          7737:       if test "$no_install" = yes; then
        !          7738:        # We don't need to create a wrapper script.
        !          7739:        link_command="$compile_var$compile_command$compile_rpath"
        !          7740:        # Replace the output file specification.
        !          7741:        link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
        !          7742:        # Delete the old output file.
        !          7743:        $opt_dry_run || $RM $output
        !          7744:        # Link the executable and exit
        !          7745:        func_show_eval "$link_command" 'exit $?'
        !          7746:        exit $EXIT_SUCCESS
        !          7747:       fi
        !          7748: 
        !          7749:       if test "$hardcode_action" = relink; then
        !          7750:        # Fast installation is not supported
        !          7751:        link_command="$compile_var$compile_command$compile_rpath"
        !          7752:        relink_command="$finalize_var$finalize_command$finalize_rpath"
        !          7753: 
        !          7754:        func_warning "this platform does not like uninstalled shared libraries"
        !          7755:        func_warning "\`$output' will be relinked during installation"
        !          7756:       else
        !          7757:        if test "$fast_install" != no; then
        !          7758:          link_command="$finalize_var$compile_command$finalize_rpath"
        !          7759:          if test "$fast_install" = yes; then
        !          7760:            relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
        !          7761:          else
        !          7762:            # fast_install is set to needless
        !          7763:            relink_command=
        !          7764:          fi
        !          7765:        else
        !          7766:          link_command="$compile_var$compile_command$compile_rpath"
        !          7767:          relink_command="$finalize_var$finalize_command$finalize_rpath"
        !          7768:        fi
        !          7769:       fi
        !          7770: 
        !          7771:       # Replace the output file specification.
        !          7772:       link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
        !          7773: 
        !          7774:       # Delete the old output files.
        !          7775:       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
        !          7776: 
        !          7777:       func_show_eval "$link_command" 'exit $?'
        !          7778: 
        !          7779:       # Now create the wrapper script.
        !          7780:       func_verbose "creating $output"
        !          7781: 
        !          7782:       # Quote the relink command for shipping.
        !          7783:       if test -n "$relink_command"; then
        !          7784:        # Preserve any variables that may affect compiler behavior
        !          7785:        for var in $variables_saved_for_relink; do
        !          7786:          if eval test -z \"\${$var+set}\"; then
        !          7787:            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
        !          7788:          elif eval var_value=\$$var; test -z "$var_value"; then
        !          7789:            relink_command="$var=; export $var; $relink_command"
        !          7790:          else
        !          7791:            func_quote_for_eval "$var_value"
        !          7792:            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
        !          7793:          fi
        !          7794:        done
        !          7795:        relink_command="(cd `pwd`; $relink_command)"
        !          7796:        relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
        !          7797:       fi
        !          7798: 
        !          7799:       # Quote $ECHO for shipping.
        !          7800:       if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
        !          7801:        case $progpath in
        !          7802:        [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
        !          7803:        *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
        !          7804:        esac
        !          7805:        qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
        !          7806:       else
        !          7807:        qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
        !          7808:       fi
        !          7809: 
        !          7810:       # Only actually do things if not in dry run mode.
        !          7811:       $opt_dry_run || {
        !          7812:        # win32 will think the script is a binary if it has
        !          7813:        # a .exe suffix, so we strip it off here.
        !          7814:        case $output in
        !          7815:          *.exe) func_stripname '' '.exe' "$output"
        !          7816:                 output=$func_stripname_result ;;
        !          7817:        esac
        !          7818:        # test for cygwin because mv fails w/o .exe extensions
        !          7819:        case $host in
        !          7820:          *cygwin*)
        !          7821:            exeext=.exe
        !          7822:            func_stripname '' '.exe' "$outputname"
        !          7823:            outputname=$func_stripname_result ;;
        !          7824:          *) exeext= ;;
        !          7825:        esac
        !          7826:        case $host in
        !          7827:          *cygwin* | *mingw* )
        !          7828:            func_dirname_and_basename "$output" "" "."
        !          7829:            output_name=$func_basename_result
        !          7830:            output_path=$func_dirname_result
        !          7831:            cwrappersource="$output_path/$objdir/lt-$output_name.c"
        !          7832:            cwrapper="$output_path/$output_name.exe"
        !          7833:            $RM $cwrappersource $cwrapper
        !          7834:            trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
        !          7835: 
        !          7836:            func_emit_cwrapperexe_src > $cwrappersource
        !          7837: 
        !          7838:            # The wrapper executable is built using the $host compiler,
        !          7839:            # because it contains $host paths and files. If cross-
        !          7840:            # compiling, it, like the target executable, must be
        !          7841:            # executed on the $host or under an emulation environment.
        !          7842:            $opt_dry_run || {
        !          7843:              $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
        !          7844:              $STRIP $cwrapper
        !          7845:            }
        !          7846: 
        !          7847:            # Now, create the wrapper script for func_source use:
        !          7848:            func_ltwrapper_scriptname $cwrapper
        !          7849:            $RM $func_ltwrapper_scriptname_result
        !          7850:            trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
        !          7851:            $opt_dry_run || {
        !          7852:              # note: this script will not be executed, so do not chmod.
        !          7853:              if test "x$build" = "x$host" ; then
        !          7854:                $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
        !          7855:              else
        !          7856:                func_emit_wrapper no > $func_ltwrapper_scriptname_result
        !          7857:              fi
        !          7858:            }
        !          7859:          ;;
        !          7860:          * )
        !          7861:            $RM $output
        !          7862:            trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
        !          7863: 
        !          7864:            func_emit_wrapper no > $output
        !          7865:            chmod +x $output
        !          7866:          ;;
        !          7867:        esac
        !          7868:       }
        !          7869:       exit $EXIT_SUCCESS
        !          7870:       ;;
        !          7871:     esac
        !          7872: 
        !          7873:     # See if we need to build an old-fashioned archive.
        !          7874:     for oldlib in $oldlibs; do
        !          7875: 
        !          7876:       if test "$build_libtool_libs" = convenience; then
        !          7877:        oldobjs="$libobjs_save $symfileobj"
        !          7878:        addlibs="$convenience"
        !          7879:        build_libtool_libs=no
        !          7880:       else
        !          7881:        if test "$build_libtool_libs" = module; then
        !          7882:          oldobjs="$libobjs_save"
        !          7883:          build_libtool_libs=no
        !          7884:        else
        !          7885:          oldobjs="$old_deplibs $non_pic_objects"
        !          7886:          if test "$preload" = yes && test -f "$symfileobj"; then
        !          7887:            oldobjs="$oldobjs $symfileobj"
        !          7888:          fi
        !          7889:        fi
        !          7890:        addlibs="$old_convenience"
        !          7891:       fi
        !          7892: 
        !          7893:       if test -n "$addlibs"; then
        !          7894:        gentop="$output_objdir/${outputname}x"
        !          7895:        generated="$generated $gentop"
        !          7896: 
        !          7897:        func_extract_archives $gentop $addlibs
        !          7898:        oldobjs="$oldobjs $func_extract_archives_result"
        !          7899:       fi
        !          7900: 
        !          7901:       # Do each command in the archive commands.
        !          7902:       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
        !          7903:        cmds=$old_archive_from_new_cmds
        !          7904:       else
        !          7905: 
        !          7906:        # Add any objects from preloaded convenience libraries
        !          7907:        if test -n "$dlprefiles"; then
        !          7908:          gentop="$output_objdir/${outputname}x"
        !          7909:          generated="$generated $gentop"
        !          7910: 
        !          7911:          func_extract_archives $gentop $dlprefiles
        !          7912:          oldobjs="$oldobjs $func_extract_archives_result"
        !          7913:        fi
        !          7914: 
        !          7915:        # POSIX demands no paths to be encoded in archives.  We have
        !          7916:        # to avoid creating archives with duplicate basenames if we
        !          7917:        # might have to extract them afterwards, e.g., when creating a
        !          7918:        # static archive out of a convenience library, or when linking
        !          7919:        # the entirety of a libtool archive into another (currently
        !          7920:        # not supported by libtool).
        !          7921:        if (for obj in $oldobjs
        !          7922:            do
        !          7923:              func_basename "$obj"
        !          7924:              $ECHO "$func_basename_result"
        !          7925:            done | sort | sort -uc >/dev/null 2>&1); then
        !          7926:          :
        !          7927:        else
        !          7928:          $ECHO "copying selected object files to avoid basename conflicts..."
        !          7929:          gentop="$output_objdir/${outputname}x"
        !          7930:          generated="$generated $gentop"
        !          7931:          func_mkdir_p "$gentop"
        !          7932:          save_oldobjs=$oldobjs
        !          7933:          oldobjs=
        !          7934:          counter=1
        !          7935:          for obj in $save_oldobjs
        !          7936:          do
        !          7937:            func_basename "$obj"
        !          7938:            objbase="$func_basename_result"
        !          7939:            case " $oldobjs " in
        !          7940:            " ") oldobjs=$obj ;;
        !          7941:            *[\ /]"$objbase "*)
        !          7942:              while :; do
        !          7943:                # Make sure we don't pick an alternate name that also
        !          7944:                # overlaps.
        !          7945:                newobj=lt$counter-$objbase
        !          7946:                func_arith $counter + 1
        !          7947:                counter=$func_arith_result
        !          7948:                case " $oldobjs " in
        !          7949:                *[\ /]"$newobj "*) ;;
        !          7950:                *) if test ! -f "$gentop/$newobj"; then break; fi ;;
        !          7951:                esac
        !          7952:              done
        !          7953:              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
        !          7954:              oldobjs="$oldobjs $gentop/$newobj"
        !          7955:              ;;
        !          7956:            *) oldobjs="$oldobjs $obj" ;;
        !          7957:            esac
        !          7958:          done
        !          7959:        fi
        !          7960:        eval cmds=\"$old_archive_cmds\"
        !          7961: 
        !          7962:        func_len " $cmds"
        !          7963:        len=$func_len_result
        !          7964:        if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
        !          7965:          cmds=$old_archive_cmds
        !          7966:        else
        !          7967:          # the command line is too long to link in one step, link in parts
        !          7968:          func_verbose "using piecewise archive linking..."
        !          7969:          save_RANLIB=$RANLIB
        !          7970:          RANLIB=:
        !          7971:          objlist=
        !          7972:          concat_cmds=
        !          7973:          save_oldobjs=$oldobjs
        !          7974:          oldobjs=
        !          7975:          # Is there a better way of finding the last object in the list?
        !          7976:          for obj in $save_oldobjs
        !          7977:          do
        !          7978:            last_oldobj=$obj
        !          7979:          done
        !          7980:          eval test_cmds=\"$old_archive_cmds\"
        !          7981:          func_len " $test_cmds"
        !          7982:          len0=$func_len_result
        !          7983:          len=$len0
        !          7984:          for obj in $save_oldobjs
        !          7985:          do
        !          7986:            func_len " $obj"
        !          7987:            func_arith $len + $func_len_result
        !          7988:            len=$func_arith_result
        !          7989:            func_append objlist " $obj"
        !          7990:            if test "$len" -lt "$max_cmd_len"; then
        !          7991:              :
        !          7992:            else
        !          7993:              # the above command should be used before it gets too long
        !          7994:              oldobjs=$objlist
        !          7995:              if test "$obj" = "$last_oldobj" ; then
        !          7996:                RANLIB=$save_RANLIB
        !          7997:              fi
        !          7998:              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
        !          7999:              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
        !          8000:              objlist=
        !          8001:              len=$len0
        !          8002:            fi
        !          8003:          done
        !          8004:          RANLIB=$save_RANLIB
        !          8005:          oldobjs=$objlist
        !          8006:          if test "X$oldobjs" = "X" ; then
        !          8007:            eval cmds=\"\$concat_cmds\"
        !          8008:          else
        !          8009:            eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
        !          8010:          fi
        !          8011:        fi
        !          8012:       fi
        !          8013:       func_execute_cmds "$cmds" 'exit $?'
        !          8014:     done
        !          8015: 
        !          8016:     test -n "$generated" && \
        !          8017:       func_show_eval "${RM}r$generated"
        !          8018: 
        !          8019:     # Now create the libtool archive.
        !          8020:     case $output in
        !          8021:     *.la)
        !          8022:       old_library=
        !          8023:       test "$build_old_libs" = yes && old_library="$libname.$libext"
        !          8024:       func_verbose "creating $output"
        !          8025: 
        !          8026:       # Preserve any variables that may affect compiler behavior
        !          8027:       for var in $variables_saved_for_relink; do
        !          8028:        if eval test -z \"\${$var+set}\"; then
        !          8029:          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
        !          8030:        elif eval var_value=\$$var; test -z "$var_value"; then
        !          8031:          relink_command="$var=; export $var; $relink_command"
        !          8032:        else
        !          8033:          func_quote_for_eval "$var_value"
        !          8034:          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
        !          8035:        fi
        !          8036:       done
        !          8037:       # Quote the link command for shipping.
        !          8038:       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
        !          8039:       relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
        !          8040:       if test "$hardcode_automatic" = yes ; then
        !          8041:        relink_command=
        !          8042:       fi
        !          8043: 
        !          8044:       # Only create the output if not a dry run.
        !          8045:       $opt_dry_run || {
        !          8046:        for installed in no yes; do
        !          8047:          if test "$installed" = yes; then
        !          8048:            if test -z "$install_libdir"; then
        !          8049:              break
        !          8050:            fi
        !          8051:            output="$output_objdir/$outputname"i
        !          8052:            # Replace all uninstalled libtool libraries with the installed ones
        !          8053:            newdependency_libs=
        !          8054:            for deplib in $dependency_libs; do
        !          8055:              case $deplib in
        !          8056:              *.la)
        !          8057:                func_basename "$deplib"
        !          8058:                name="$func_basename_result"
        !          8059:                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
        !          8060:                test -z "$libdir" && \
        !          8061:                  func_fatal_error "\`$deplib' is not a valid libtool archive"
        !          8062:                newdependency_libs="$newdependency_libs $libdir/$name"
        !          8063:                ;;
        !          8064:              *) newdependency_libs="$newdependency_libs $deplib" ;;
        !          8065:              esac
        !          8066:            done
        !          8067:            dependency_libs="$newdependency_libs"
        !          8068:            newdlfiles=
        !          8069: 
        !          8070:            for lib in $dlfiles; do
        !          8071:              case $lib in
        !          8072:              *.la)
        !          8073:                func_basename "$lib"
        !          8074:                name="$func_basename_result"
        !          8075:                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
        !          8076:                test -z "$libdir" && \
        !          8077:                  func_fatal_error "\`$lib' is not a valid libtool archive"
        !          8078:                newdlfiles="$newdlfiles $libdir/$name"
        !          8079:                ;;
        !          8080:              *) newdlfiles="$newdlfiles $lib" ;;
        !          8081:              esac
        !          8082:            done
        !          8083:            dlfiles="$newdlfiles"
        !          8084:            newdlprefiles=
        !          8085:            for lib in $dlprefiles; do
        !          8086:              case $lib in
        !          8087:              *.la)
        !          8088:                # Only pass preopened files to the pseudo-archive (for
        !          8089:                # eventual linking with the app. that links it) if we
        !          8090:                # didn't already link the preopened objects directly into
        !          8091:                # the library:
        !          8092:                func_basename "$lib"
        !          8093:                name="$func_basename_result"
        !          8094:                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
        !          8095:                test -z "$libdir" && \
        !          8096:                  func_fatal_error "\`$lib' is not a valid libtool archive"
        !          8097:                newdlprefiles="$newdlprefiles $libdir/$name"
        !          8098:                ;;
        !          8099:              esac
        !          8100:            done
        !          8101:            dlprefiles="$newdlprefiles"
        !          8102:          else
        !          8103:            newdlfiles=
        !          8104:            for lib in $dlfiles; do
        !          8105:              case $lib in
        !          8106:                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
        !          8107:                *) abs=`pwd`"/$lib" ;;
        !          8108:              esac
        !          8109:              newdlfiles="$newdlfiles $abs"
        !          8110:            done
        !          8111:            dlfiles="$newdlfiles"
        !          8112:            newdlprefiles=
        !          8113:            for lib in $dlprefiles; do
        !          8114:              case $lib in
        !          8115:                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
        !          8116:                *) abs=`pwd`"/$lib" ;;
        !          8117:              esac
        !          8118:              newdlprefiles="$newdlprefiles $abs"
        !          8119:            done
        !          8120:            dlprefiles="$newdlprefiles"
        !          8121:          fi
        !          8122:          $RM $output
        !          8123:          # place dlname in correct position for cygwin
        !          8124:          tdlname=$dlname
        !          8125:          case $host,$output,$installed,$module,$dlname in
        !          8126:            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
        !          8127:          esac
        !          8128:          $ECHO > $output "\
        !          8129: # $outputname - a libtool library file
        !          8130: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
        !          8131: #
        !          8132: # Please DO NOT delete this file!
        !          8133: # It is necessary for linking the library.
        !          8134: 
        !          8135: # The name that we can dlopen(3).
        !          8136: dlname='$tdlname'
        !          8137: 
        !          8138: # Names of this library.
        !          8139: library_names='$library_names'
        !          8140: 
        !          8141: # The name of the static archive.
        !          8142: old_library='$old_library'
        !          8143: 
        !          8144: # Linker flags that can not go in dependency_libs.
        !          8145: inherited_linker_flags='$new_inherited_linker_flags'
        !          8146: 
        !          8147: # Libraries that this one depends upon.
        !          8148: dependency_libs='$dependency_libs'
        !          8149: 
        !          8150: # Names of additional weak libraries provided by this library
        !          8151: weak_library_names='$weak_libs'
        !          8152: 
        !          8153: # Version information for $libname.
        !          8154: current=$current
        !          8155: age=$age
        !          8156: revision=$revision
        !          8157: 
        !          8158: # Is this an already installed library?
        !          8159: installed=$installed
        !          8160: 
        !          8161: # Should we warn about portability when linking against -modules?
        !          8162: shouldnotlink=$module
        !          8163: 
        !          8164: # Files to dlopen/dlpreopen
        !          8165: dlopen='$dlfiles'
        !          8166: dlpreopen='$dlprefiles'
        !          8167: 
        !          8168: # Directory that this library needs to be installed in:
        !          8169: libdir='$install_libdir'"
        !          8170:          if test "$installed" = no && test "$need_relink" = yes; then
        !          8171:            $ECHO >> $output "\
        !          8172: relink_command=\"$relink_command\""
        !          8173:          fi
        !          8174:        done
        !          8175:       }
        !          8176: 
        !          8177:       # Do a symbolic link so that the libtool archive can be found in
        !          8178:       # LD_LIBRARY_PATH before the program is installed.
        !          8179:       func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
        !          8180:       ;;
        !          8181:     esac
        !          8182:     exit $EXIT_SUCCESS
        !          8183: }
        !          8184: 
        !          8185: { test "$mode" = link || test "$mode" = relink; } &&
        !          8186:     func_mode_link ${1+"$@"}
        !          8187: 
        !          8188: 
        !          8189: # func_mode_uninstall arg...
        !          8190: func_mode_uninstall ()
        !          8191: {
        !          8192:     $opt_debug
        !          8193:     RM="$nonopt"
        !          8194:     files=
        !          8195:     rmforce=
        !          8196:     exit_status=0
        !          8197: 
        !          8198:     # This variable tells wrapper scripts just to set variables rather
        !          8199:     # than running their programs.
        !          8200:     libtool_install_magic="$magic"
        !          8201: 
        !          8202:     for arg
        !          8203:     do
        !          8204:       case $arg in
        !          8205:       -f) RM="$RM $arg"; rmforce=yes ;;
        !          8206:       -*) RM="$RM $arg" ;;
        !          8207:       *) files="$files $arg" ;;
        !          8208:       esac
        !          8209:     done
        !          8210: 
        !          8211:     test -z "$RM" && \
        !          8212:       func_fatal_help "you must specify an RM program"
        !          8213: 
        !          8214:     rmdirs=
        !          8215: 
        !          8216:     origobjdir="$objdir"
        !          8217:     for file in $files; do
        !          8218:       func_dirname "$file" "" "."
        !          8219:       dir="$func_dirname_result"
        !          8220:       if test "X$dir" = X.; then
        !          8221:        objdir="$origobjdir"
        !          8222:       else
        !          8223:        objdir="$dir/$origobjdir"
        !          8224:       fi
        !          8225:       func_basename "$file"
        !          8226:       name="$func_basename_result"
        !          8227:       test "$mode" = uninstall && objdir="$dir"
        !          8228: 
        !          8229:       # Remember objdir for removal later, being careful to avoid duplicates
        !          8230:       if test "$mode" = clean; then
        !          8231:        case " $rmdirs " in
        !          8232:          *" $objdir "*) ;;
        !          8233:          *) rmdirs="$rmdirs $objdir" ;;
        !          8234:        esac
        !          8235:       fi
        !          8236: 
        !          8237:       # Don't error if the file doesn't exist and rm -f was used.
        !          8238:       if { test -L "$file"; } >/dev/null 2>&1 ||
        !          8239:         { test -h "$file"; } >/dev/null 2>&1 ||
        !          8240:         test -f "$file"; then
        !          8241:        :
        !          8242:       elif test -d "$file"; then
        !          8243:        exit_status=1
        !          8244:        continue
        !          8245:       elif test "$rmforce" = yes; then
        !          8246:        continue
        !          8247:       fi
        !          8248: 
        !          8249:       rmfiles="$file"
        !          8250: 
        !          8251:       case $name in
        !          8252:       *.la)
        !          8253:        # Possibly a libtool archive, so verify it.
        !          8254:        if func_lalib_p "$file"; then
        !          8255:          func_source $dir/$name
        !          8256: 
        !          8257:          # Delete the libtool libraries and symlinks.
        !          8258:          for n in $library_names; do
        !          8259:            rmfiles="$rmfiles $objdir/$n"
        !          8260:          done
        !          8261:          test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
        !          8262: 
        !          8263:          case "$mode" in
        !          8264:          clean)
        !          8265:            case "  $library_names " in
        !          8266:            # "  " in the beginning catches empty $dlname
        !          8267:            *" $dlname "*) ;;
        !          8268:            *) rmfiles="$rmfiles $objdir/$dlname" ;;
        !          8269:            esac
        !          8270:            test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
        !          8271:            ;;
        !          8272:          uninstall)
        !          8273:            if test -n "$library_names"; then
        !          8274:              # Do each command in the postuninstall commands.
        !          8275:              func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
        !          8276:            fi
        !          8277: 
        !          8278:            if test -n "$old_library"; then
        !          8279:              # Do each command in the old_postuninstall commands.
        !          8280:              func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
        !          8281:            fi
        !          8282:            # FIXME: should reinstall the best remaining shared library.
        !          8283:            ;;
        !          8284:          esac
        !          8285:        fi
        !          8286:        ;;
        !          8287: 
        !          8288:       *.lo)
        !          8289:        # Possibly a libtool object, so verify it.
        !          8290:        if func_lalib_p "$file"; then
        !          8291: 
        !          8292:          # Read the .lo file
        !          8293:          func_source $dir/$name
        !          8294: 
        !          8295:          # Add PIC object to the list of files to remove.
        !          8296:          if test -n "$pic_object" &&
        !          8297:             test "$pic_object" != none; then
        !          8298:            rmfiles="$rmfiles $dir/$pic_object"
        !          8299:          fi
        !          8300: 
        !          8301:          # Add non-PIC object to the list of files to remove.
        !          8302:          if test -n "$non_pic_object" &&
        !          8303:             test "$non_pic_object" != none; then
        !          8304:            rmfiles="$rmfiles $dir/$non_pic_object"
        !          8305:          fi
        !          8306:        fi
        !          8307:        ;;
        !          8308: 
        !          8309:       *)
        !          8310:        if test "$mode" = clean ; then
        !          8311:          noexename=$name
        !          8312:          case $file in
        !          8313:          *.exe)
        !          8314:            func_stripname '' '.exe' "$file"
        !          8315:            file=$func_stripname_result
        !          8316:            func_stripname '' '.exe' "$name"
        !          8317:            noexename=$func_stripname_result
        !          8318:            # $file with .exe has already been added to rmfiles,
        !          8319:            # add $file without .exe
        !          8320:            rmfiles="$rmfiles $file"
        !          8321:            ;;
        !          8322:          esac
        !          8323:          # Do a test to see if this is a libtool program.
        !          8324:          if func_ltwrapper_p "$file"; then
        !          8325:            if func_ltwrapper_executable_p "$file"; then
        !          8326:              func_ltwrapper_scriptname "$file"
        !          8327:              relink_command=
        !          8328:              func_source $func_ltwrapper_scriptname_result
        !          8329:              rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
        !          8330:            else
        !          8331:              relink_command=
        !          8332:              func_source $dir/$noexename
        !          8333:            fi
        !          8334: 
        !          8335:            # note $name still contains .exe if it was in $file originally
        !          8336:            # as does the version of $file that was added into $rmfiles
        !          8337:            rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
        !          8338:            if test "$fast_install" = yes && test -n "$relink_command"; then
        !          8339:              rmfiles="$rmfiles $objdir/lt-$name"
        !          8340:            fi
        !          8341:            if test "X$noexename" != "X$name" ; then
        !          8342:              rmfiles="$rmfiles $objdir/lt-${noexename}.c"
        !          8343:            fi
        !          8344:          fi
        !          8345:        fi
        !          8346:        ;;
        !          8347:       esac
        !          8348:       func_show_eval "$RM $rmfiles" 'exit_status=1'
        !          8349:     done
        !          8350:     objdir="$origobjdir"
        !          8351: 
        !          8352:     # Try to remove the ${objdir}s in the directories where we deleted files
        !          8353:     for dir in $rmdirs; do
        !          8354:       if test -d "$dir"; then
        !          8355:        func_show_eval "rmdir $dir >/dev/null 2>&1"
        !          8356:       fi
        !          8357:     done
        !          8358: 
        !          8359:     exit $exit_status
        !          8360: }
        !          8361: 
        !          8362: { test "$mode" = uninstall || test "$mode" = clean; } &&
        !          8363:     func_mode_uninstall ${1+"$@"}
        !          8364: 
        !          8365: test -z "$mode" && {
        !          8366:   help="$generic_help"
        !          8367:   func_fatal_help "you must specify a MODE"
        !          8368: }
        !          8369: 
        !          8370: test -z "$exec_cmd" && \
        !          8371:   func_fatal_help "invalid operation mode \`$mode'"
        !          8372: 
        !          8373: if test -n "$exec_cmd"; then
        !          8374:   eval exec "$exec_cmd"
        !          8375:   exit $EXIT_FAILURE
        !          8376: fi
        !          8377: 
        !          8378: exit $exit_status
        !          8379: 
        !          8380: 
        !          8381: # The TAGs below are defined such that we never get into a situation
        !          8382: # in which we disable both kinds of libraries.  Given conflicting
        !          8383: # choices, we go for a static library, that is the most portable,
        !          8384: # since we can't tell whether shared libraries were disabled because
        !          8385: # the user asked for that or because the platform doesn't support
        !          8386: # them.  This is particularly important on AIX, because we don't
        !          8387: # support having both static and shared libraries enabled at the same
        !          8388: # time on that platform, so we default to a shared-only configuration.
        !          8389: # If a disable-shared tag is given, we'll fallback to a static-only
        !          8390: # configuration.  But we'll never go from static-only to shared-only.
        !          8391: 
        !          8392: # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
        !          8393: build_libtool_libs=no
        !          8394: build_old_libs=yes
        !          8395: # ### END LIBTOOL TAG CONFIG: disable-shared
        !          8396: 
        !          8397: # ### BEGIN LIBTOOL TAG CONFIG: disable-static
        !          8398: build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
        !          8399: # ### END LIBTOOL TAG CONFIG: disable-static
        !          8400: 
        !          8401: # Local Variables:
        !          8402: # mode:shell-script
        !          8403: # sh-indentation:2
        !          8404: # End:
        !          8405: # vi:sw=2
        !          8406: 

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>