Annotation of embedaddon/confuse/support/ltmain.sh, revision 1.1.1.1

1.1       misho       1: # Generated from ltmain.m4sh.
                      2: 
                      3: # ltmain.sh (GNU libtool) 2.2.6b
                      4: # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
                      5: 
                      6: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
                      7: # This is free software; see the source for copying conditions.  There is NO
                      8: # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
                      9: 
                     10: # GNU Libtool is free software; you can redistribute it and/or modify
                     11: # it under the terms of the GNU General Public License as published by
                     12: # the Free Software Foundation; either version 2 of the License, or
                     13: # (at your option) any later version.
                     14: #
                     15: # As a special exception to the GNU General Public License,
                     16: # if you distribute this file as part of a program or library that
                     17: # is built using GNU Libtool, you may include this file under the
                     18: # same distribution terms that you use for the rest of that program.
                     19: #
                     20: # GNU Libtool is distributed in the hope that it will be useful, but
                     21: # WITHOUT ANY WARRANTY; without even the implied warranty of
                     22: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
                     23: # General Public License for more details.
                     24: #
                     25: # You should have received a copy of the GNU General Public License
                     26: # along with GNU Libtool; see the file COPYING.  If not, a copy
                     27: # can be downloaded from http://www.gnu.org/licenses/gpl.html,
                     28: # or obtained by writing to the Free Software Foundation, Inc.,
                     29: # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
                     30: 
                     31: # Usage: $progname [OPTION]... [MODE-ARG]...
                     32: #
                     33: # Provide generalized library-building support services.
                     34: #
                     35: #     --config             show all configuration variables
                     36: #     --debug              enable verbose shell tracing
                     37: # -n, --dry-run            display commands without modifying any files
                     38: #     --features           display basic configuration information and exit
                     39: #     --mode=MODE          use operation mode MODE
                     40: #     --preserve-dup-deps  don't remove duplicate dependency libraries
                     41: #     --quiet, --silent    don't print informational messages
                     42: #     --tag=TAG            use configuration variables from tag TAG
                     43: # -v, --verbose            print informational messages (default)
                     44: #     --version            print version information
                     45: # -h, --help               print short or long help message
                     46: #
                     47: # MODE must be one of the following:
                     48: #
                     49: #       clean              remove files from the build directory
                     50: #       compile            compile a source file into a libtool object
                     51: #       execute            automatically set library path, then run a program
                     52: #       finish             complete the installation of libtool libraries
                     53: #       install            install libraries or executables
                     54: #       link               create a library or an executable
                     55: #       uninstall          remove libraries from an installed directory
                     56: #
                     57: # MODE-ARGS vary depending on the MODE.
                     58: # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
                     59: #
                     60: # When reporting a bug, please describe a test case to reproduce it and
                     61: # include the following information:
                     62: #
                     63: #       host-triplet:  $host
                     64: #       shell:         $SHELL
                     65: #       compiler:              $LTCC
                     66: #       compiler flags:                $LTCFLAGS
                     67: #       linker:                $LD (gnu? $with_gnu_ld)
                     68: #       $progname:             (GNU libtool) 2.2.6b
                     69: #       automake:              $automake_version
                     70: #       autoconf:              $autoconf_version
                     71: #
                     72: # Report bugs to <bug-libtool@gnu.org>.
                     73: 
                     74: PROGRAM=ltmain.sh
                     75: PACKAGE=libtool
                     76: VERSION=2.2.6b
                     77: TIMESTAMP=""
                     78: package_revision=1.3017
                     79: 
                     80: # Be Bourne compatible
                     81: if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
                     82:   emulate sh
                     83:   NULLCMD=:
                     84:   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
                     85:   # is contrary to our usage.  Disable this feature.
                     86:   alias -g '${1+"$@"}'='"$@"'
                     87:   setopt NO_GLOB_SUBST
                     88: else
                     89:   case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
                     90: fi
                     91: BIN_SH=xpg4; export BIN_SH # for Tru64
                     92: DUALCASE=1; export DUALCASE # for MKS sh
                     93: 
                     94: # NLS nuisances: We save the old values to restore during execute mode.
                     95: # Only set LANG and LC_ALL to C if already set.
                     96: # These must not be set unconditionally because not all systems understand
                     97: # e.g. LANG=C (notably SCO).
                     98: lt_user_locale=
                     99: lt_safe_locale=
                    100: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
                    101: do
                    102:   eval "if test \"\${$lt_var+set}\" = set; then
                    103:           save_$lt_var=\$$lt_var
                    104:           $lt_var=C
                    105:          export $lt_var
                    106:          lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
                    107:          lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
                    108:        fi"
                    109: done
                    110: 
                    111: $lt_unset CDPATH
                    112: 
                    113: 
                    114: 
                    115: 
                    116: 
                    117: : ${CP="cp -f"}
                    118: : ${ECHO="echo"}
                    119: : ${EGREP="/bin/grep -E"}
                    120: : ${FGREP="/bin/grep -F"}
                    121: : ${GREP="/bin/grep"}
                    122: : ${LN_S="ln -s"}
                    123: : ${MAKE="make"}
                    124: : ${MKDIR="mkdir"}
                    125: : ${MV="mv -f"}
                    126: : ${RM="rm -f"}
                    127: : ${SED="/bin/sed"}
                    128: : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
                    129: : ${Xsed="$SED -e 1s/^X//"}
                    130: 
                    131: # Global variables:
                    132: EXIT_SUCCESS=0
                    133: EXIT_FAILURE=1
                    134: EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
                    135: EXIT_SKIP=77     # $? = 77 is used to indicate a skipped test to automake.
                    136: 
                    137: exit_status=$EXIT_SUCCESS
                    138: 
                    139: # Make sure IFS has a sensible default
                    140: lt_nl='
                    141: '
                    142: IFS="  $lt_nl"
                    143: 
                    144: dirname="s,/[^/]*$,,"
                    145: basename="s,^.*/,,"
                    146: 
                    147: # func_dirname_and_basename file append nondir_replacement
                    148: # perform func_basename and func_dirname in a single function
                    149: # call:
                    150: #   dirname:  Compute the dirname of FILE.  If nonempty,
                    151: #             add APPEND to the result, otherwise set result
                    152: #             to NONDIR_REPLACEMENT.
                    153: #             value returned in "$func_dirname_result"
                    154: #   basename: Compute filename of FILE.
                    155: #             value retuned in "$func_basename_result"
                    156: # Implementation must be kept synchronized with func_dirname
                    157: # and func_basename. For efficiency, we do not delegate to
                    158: # those functions but instead duplicate the functionality here.
                    159: func_dirname_and_basename ()
                    160: {
                    161:   # Extract subdirectory from the argument.
                    162:   func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
                    163:   if test "X$func_dirname_result" = "X${1}"; then
                    164:     func_dirname_result="${3}"
                    165:   else
                    166:     func_dirname_result="$func_dirname_result${2}"
                    167:   fi
                    168:   func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
                    169: }
                    170: 
                    171: # Generated shell functions inserted here.
                    172: 
                    173: # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
                    174: # is ksh but when the shell is invoked as "sh" and the current value of
                    175: # the _XPG environment variable is not equal to 1 (one), the special
                    176: # positional parameter $0, within a function call, is the name of the
                    177: # function.
                    178: progpath="$0"
                    179: 
                    180: # The name of this program:
                    181: # In the unlikely event $progname began with a '-', it would play havoc with
                    182: # func_echo (imagine progname=-n), so we prepend ./ in that case:
                    183: func_dirname_and_basename "$progpath"
                    184: progname=$func_basename_result
                    185: case $progname in
                    186:   -*) progname=./$progname ;;
                    187: esac
                    188: 
                    189: # Make sure we have an absolute path for reexecution:
                    190: case $progpath in
                    191:   [\\/]*|[A-Za-z]:\\*) ;;
                    192:   *[\\/]*)
                    193:      progdir=$func_dirname_result
                    194:      progdir=`cd "$progdir" && pwd`
                    195:      progpath="$progdir/$progname"
                    196:      ;;
                    197:   *)
                    198:      save_IFS="$IFS"
                    199:      IFS=:
                    200:      for progdir in $PATH; do
                    201:        IFS="$save_IFS"
                    202:        test -x "$progdir/$progname" && break
                    203:      done
                    204:      IFS="$save_IFS"
                    205:      test -n "$progdir" || progdir=`pwd`
                    206:      progpath="$progdir/$progname"
                    207:      ;;
                    208: esac
                    209: 
                    210: # Sed substitution that helps us do robust quoting.  It backslashifies
                    211: # metacharacters that are still active within double-quoted strings.
                    212: Xsed="${SED}"' -e 1s/^X//'
                    213: sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
                    214: 
                    215: # Same as above, but do not quote variable references.
                    216: double_quote_subst='s/\(["`\\]\)/\\\1/g'
                    217: 
                    218: # Re-`\' parameter expansions in output of double_quote_subst that were
                    219: # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
                    220: # in input to double_quote_subst, that '$' was protected from expansion.
                    221: # Since each input `\' is now two `\'s, look for any number of runs of
                    222: # four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
                    223: bs='\\'
                    224: bs2='\\\\'
                    225: bs4='\\\\\\\\'
                    226: dollar='\$'
                    227: sed_double_backslash="\
                    228:   s/$bs4/&\\
                    229: /g
                    230:   s/^$bs2$dollar/$bs&/
                    231:   s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
                    232:   s/\n//g"
                    233: 
                    234: # Standard options:
                    235: opt_dry_run=false
                    236: opt_help=false
                    237: opt_quiet=false
                    238: opt_verbose=false
                    239: opt_warning=:
                    240: 
                    241: # func_echo arg...
                    242: # Echo program name prefixed message, along with the current mode
                    243: # name if it has been set yet.
                    244: func_echo ()
                    245: {
                    246:     $ECHO "$progname${mode+: }$mode: $*"
                    247: }
                    248: 
                    249: # func_verbose arg...
                    250: # Echo program name prefixed message in verbose mode only.
                    251: func_verbose ()
                    252: {
                    253:     $opt_verbose && func_echo ${1+"$@"}
                    254: 
                    255:     # A bug in bash halts the script if the last line of a function
                    256:     # fails when set -e is in force, so we need another command to
                    257:     # work around that:
                    258:     :
                    259: }
                    260: 
                    261: # func_error arg...
                    262: # Echo program name prefixed message to standard error.
                    263: func_error ()
                    264: {
                    265:     $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
                    266: }
                    267: 
                    268: # func_warning arg...
                    269: # Echo program name prefixed warning message to standard error.
                    270: func_warning ()
                    271: {
                    272:     $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
                    273: 
                    274:     # bash bug again:
                    275:     :
                    276: }
                    277: 
                    278: # func_fatal_error arg...
                    279: # Echo program name prefixed message to standard error, and exit.
                    280: func_fatal_error ()
                    281: {
                    282:     func_error ${1+"$@"}
                    283:     exit $EXIT_FAILURE
                    284: }
                    285: 
                    286: # func_fatal_help arg...
                    287: # Echo program name prefixed message to standard error, followed by
                    288: # a help hint, and exit.
                    289: func_fatal_help ()
                    290: {
                    291:     func_error ${1+"$@"}
                    292:     func_fatal_error "$help"
                    293: }
                    294: help="Try \`$progname --help' for more information."  ## default
                    295: 
                    296: 
                    297: # func_grep expression filename
                    298: # Check whether EXPRESSION matches any line of FILENAME, without output.
                    299: func_grep ()
                    300: {
                    301:     $GREP "$1" "$2" >/dev/null 2>&1
                    302: }
                    303: 
                    304: 
                    305: # func_mkdir_p directory-path
                    306: # Make sure the entire path to DIRECTORY-PATH is available.
                    307: func_mkdir_p ()
                    308: {
                    309:     my_directory_path="$1"
                    310:     my_dir_list=
                    311: 
                    312:     if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
                    313: 
                    314:       # Protect directory names starting with `-'
                    315:       case $my_directory_path in
                    316:         -*) my_directory_path="./$my_directory_path" ;;
                    317:       esac
                    318: 
                    319:       # While some portion of DIR does not yet exist...
                    320:       while test ! -d "$my_directory_path"; do
                    321:         # ...make a list in topmost first order.  Use a colon delimited
                    322:        # list incase some portion of path contains whitespace.
                    323:         my_dir_list="$my_directory_path:$my_dir_list"
                    324: 
                    325:         # If the last portion added has no slash in it, the list is done
                    326:         case $my_directory_path in */*) ;; *) break ;; esac
                    327: 
                    328:         # ...otherwise throw away the child directory and loop
                    329:         my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
                    330:       done
                    331:       my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
                    332: 
                    333:       save_mkdir_p_IFS="$IFS"; IFS=':'
                    334:       for my_dir in $my_dir_list; do
                    335:        IFS="$save_mkdir_p_IFS"
                    336:         # mkdir can fail with a `File exist' error if two processes
                    337:         # try to create one of the directories concurrently.  Don't
                    338:         # stop in that case!
                    339:         $MKDIR "$my_dir" 2>/dev/null || :
                    340:       done
                    341:       IFS="$save_mkdir_p_IFS"
                    342: 
                    343:       # Bail out if we (or some other process) failed to create a directory.
                    344:       test -d "$my_directory_path" || \
                    345:         func_fatal_error "Failed to create \`$1'"
                    346:     fi
                    347: }
                    348: 
                    349: 
                    350: # func_mktempdir [string]
                    351: # Make a temporary directory that won't clash with other running
                    352: # libtool processes, and avoids race conditions if possible.  If
                    353: # given, STRING is the basename for that directory.
                    354: func_mktempdir ()
                    355: {
                    356:     my_template="${TMPDIR-/tmp}/${1-$progname}"
                    357: 
                    358:     if test "$opt_dry_run" = ":"; then
                    359:       # Return a directory name, but don't create it in dry-run mode
                    360:       my_tmpdir="${my_template}-$$"
                    361:     else
                    362: 
                    363:       # If mktemp works, use that first and foremost
                    364:       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
                    365: 
                    366:       if test ! -d "$my_tmpdir"; then
                    367:         # Failing that, at least try and use $RANDOM to avoid a race
                    368:         my_tmpdir="${my_template}-${RANDOM-0}$$"
                    369: 
                    370:         save_mktempdir_umask=`umask`
                    371:         umask 0077
                    372:         $MKDIR "$my_tmpdir"
                    373:         umask $save_mktempdir_umask
                    374:       fi
                    375: 
                    376:       # If we're not in dry-run mode, bomb out on failure
                    377:       test -d "$my_tmpdir" || \
                    378:         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
                    379:     fi
                    380: 
                    381:     $ECHO "X$my_tmpdir" | $Xsed
                    382: }
                    383: 
                    384: 
                    385: # func_quote_for_eval arg
                    386: # Aesthetically quote ARG to be evaled later.
                    387: # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
                    388: # is double-quoted, suitable for a subsequent eval, whereas
                    389: # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
                    390: # which are still active within double quotes backslashified.
                    391: func_quote_for_eval ()
                    392: {
                    393:     case $1 in
                    394:       *[\\\`\"\$]*)
                    395:        func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
                    396:       *)
                    397:         func_quote_for_eval_unquoted_result="$1" ;;
                    398:     esac
                    399: 
                    400:     case $func_quote_for_eval_unquoted_result in
                    401:       # Double-quote args containing shell metacharacters to delay
                    402:       # word splitting, command substitution and and variable
                    403:       # expansion for a subsequent eval.
                    404:       # Many Bourne shells cannot handle close brackets correctly
                    405:       # in scan sets, so we specify it separately.
                    406:       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
                    407:         func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
                    408:         ;;
                    409:       *)
                    410:         func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
                    411:     esac
                    412: }
                    413: 
                    414: 
                    415: # func_quote_for_expand arg
                    416: # Aesthetically quote ARG to be evaled later; same as above,
                    417: # but do not quote variable references.
                    418: func_quote_for_expand ()
                    419: {
                    420:     case $1 in
                    421:       *[\\\`\"]*)
                    422:        my_arg=`$ECHO "X$1" | $Xsed \
                    423:            -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
                    424:       *)
                    425:         my_arg="$1" ;;
                    426:     esac
                    427: 
                    428:     case $my_arg in
                    429:       # Double-quote args containing shell metacharacters to delay
                    430:       # word splitting and command substitution for a subsequent eval.
                    431:       # Many Bourne shells cannot handle close brackets correctly
                    432:       # in scan sets, so we specify it separately.
                    433:       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
                    434:         my_arg="\"$my_arg\""
                    435:         ;;
                    436:     esac
                    437: 
                    438:     func_quote_for_expand_result="$my_arg"
                    439: }
                    440: 
                    441: 
                    442: # func_show_eval cmd [fail_exp]
                    443: # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
                    444: # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
                    445: # is given, then evaluate it.
                    446: func_show_eval ()
                    447: {
                    448:     my_cmd="$1"
                    449:     my_fail_exp="${2-:}"
                    450: 
                    451:     ${opt_silent-false} || {
                    452:       func_quote_for_expand "$my_cmd"
                    453:       eval "func_echo $func_quote_for_expand_result"
                    454:     }
                    455: 
                    456:     if ${opt_dry_run-false}; then :; else
                    457:       eval "$my_cmd"
                    458:       my_status=$?
                    459:       if test "$my_status" -eq 0; then :; else
                    460:        eval "(exit $my_status); $my_fail_exp"
                    461:       fi
                    462:     fi
                    463: }
                    464: 
                    465: 
                    466: # func_show_eval_locale cmd [fail_exp]
                    467: # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
                    468: # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
                    469: # is given, then evaluate it.  Use the saved locale for evaluation.
                    470: func_show_eval_locale ()
                    471: {
                    472:     my_cmd="$1"
                    473:     my_fail_exp="${2-:}"
                    474: 
                    475:     ${opt_silent-false} || {
                    476:       func_quote_for_expand "$my_cmd"
                    477:       eval "func_echo $func_quote_for_expand_result"
                    478:     }
                    479: 
                    480:     if ${opt_dry_run-false}; then :; else
                    481:       eval "$lt_user_locale
                    482:            $my_cmd"
                    483:       my_status=$?
                    484:       eval "$lt_safe_locale"
                    485:       if test "$my_status" -eq 0; then :; else
                    486:        eval "(exit $my_status); $my_fail_exp"
                    487:       fi
                    488:     fi
                    489: }
                    490: 
                    491: 
                    492: 
                    493: 
                    494: 
                    495: # func_version
                    496: # Echo version message to standard output and exit.
                    497: func_version ()
                    498: {
                    499:     $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
                    500:         s/^# //
                    501:        s/^# *$//
                    502:         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
                    503:         p
                    504:      }' < "$progpath"
                    505:      exit $?
                    506: }
                    507: 
                    508: # func_usage
                    509: # Echo short help message to standard output and exit.
                    510: func_usage ()
                    511: {
                    512:     $SED -n '/^# Usage:/,/# -h/ {
                    513:         s/^# //
                    514:        s/^# *$//
                    515:        s/\$progname/'$progname'/
                    516:        p
                    517:     }' < "$progpath"
                    518:     $ECHO
                    519:     $ECHO "run \`$progname --help | more' for full usage"
                    520:     exit $?
                    521: }
                    522: 
                    523: # func_help
                    524: # Echo long help message to standard output and exit.
                    525: func_help ()
                    526: {
                    527:     $SED -n '/^# Usage:/,/# Report bugs to/ {
                    528:         s/^# //
                    529:        s/^# *$//
                    530:        s*\$progname*'$progname'*
                    531:        s*\$host*'"$host"'*
                    532:        s*\$SHELL*'"$SHELL"'*
                    533:        s*\$LTCC*'"$LTCC"'*
                    534:        s*\$LTCFLAGS*'"$LTCFLAGS"'*
                    535:        s*\$LD*'"$LD"'*
                    536:        s/\$with_gnu_ld/'"$with_gnu_ld"'/
                    537:        s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
                    538:        s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
                    539:        p
                    540:      }' < "$progpath"
                    541:     exit $?
                    542: }
                    543: 
                    544: # func_missing_arg argname
                    545: # Echo program name prefixed message to standard error and set global
                    546: # exit_cmd.
                    547: func_missing_arg ()
                    548: {
                    549:     func_error "missing argument for $1"
                    550:     exit_cmd=exit
                    551: }
                    552: 
                    553: exit_cmd=:
                    554: 
                    555: 
                    556: 
                    557: 
                    558: 
                    559: # Check that we have a working $ECHO.
                    560: if test "X$1" = X--no-reexec; then
                    561:   # Discard the --no-reexec flag, and continue.
                    562:   shift
                    563: elif test "X$1" = X--fallback-echo; then
                    564:   # Avoid inline document here, it may be left over
                    565:   :
                    566: elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
                    567:   # Yippee, $ECHO works!
                    568:   :
                    569: else
                    570:   # Restart under the correct shell, and then maybe $ECHO will work.
                    571:   exec $SHELL "$progpath" --no-reexec ${1+"$@"}
                    572: fi
                    573: 
                    574: if test "X$1" = X--fallback-echo; then
                    575:   # used as fallback echo
                    576:   shift
                    577:   cat <<EOF
                    578: $*
                    579: EOF
                    580:   exit $EXIT_SUCCESS
                    581: fi
                    582: 
                    583: magic="%%%MAGIC variable%%%"
                    584: magic_exe="%%%MAGIC EXE variable%%%"
                    585: 
                    586: # Global variables.
                    587: # $mode is unset
                    588: nonopt=
                    589: execute_dlfiles=
                    590: preserve_args=
                    591: lo2o="s/\\.lo\$/.${objext}/"
                    592: o2lo="s/\\.${objext}\$/.lo/"
                    593: extracted_archives=
                    594: extracted_serial=0
                    595: 
                    596: opt_dry_run=false
                    597: opt_duplicate_deps=false
                    598: opt_silent=false
                    599: opt_debug=:
                    600: 
                    601: # If this variable is set in any of the actions, the command in it
                    602: # will be execed at the end.  This prevents here-documents from being
                    603: # left over by shells.
                    604: exec_cmd=
                    605: 
                    606: # func_fatal_configuration arg...
                    607: # Echo program name prefixed message to standard error, followed by
                    608: # a configuration failure hint, and exit.
                    609: func_fatal_configuration ()
                    610: {
                    611:     func_error ${1+"$@"}
                    612:     func_error "See the $PACKAGE documentation for more information."
                    613:     func_fatal_error "Fatal configuration error."
                    614: }
                    615: 
                    616: 
                    617: # func_config
                    618: # Display the configuration for all the tags in this script.
                    619: func_config ()
                    620: {
                    621:     re_begincf='^# ### BEGIN LIBTOOL'
                    622:     re_endcf='^# ### END LIBTOOL'
                    623: 
                    624:     # Default configuration.
                    625:     $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
                    626: 
                    627:     # Now print the configurations for the tags.
                    628:     for tagname in $taglist; do
                    629:       $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
                    630:     done
                    631: 
                    632:     exit $?
                    633: }
                    634: 
                    635: # func_features
                    636: # Display the features supported by this script.
                    637: func_features ()
                    638: {
                    639:     $ECHO "host: $host"
                    640:     if test "$build_libtool_libs" = yes; then
                    641:       $ECHO "enable shared libraries"
                    642:     else
                    643:       $ECHO "disable shared libraries"
                    644:     fi
                    645:     if test "$build_old_libs" = yes; then
                    646:       $ECHO "enable static libraries"
                    647:     else
                    648:       $ECHO "disable static libraries"
                    649:     fi
                    650: 
                    651:     exit $?
                    652: }
                    653: 
                    654: # func_enable_tag tagname
                    655: # Verify that TAGNAME is valid, and either flag an error and exit, or
                    656: # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
                    657: # variable here.
                    658: func_enable_tag ()
                    659: {
                    660:   # Global variable:
                    661:   tagname="$1"
                    662: 
                    663:   re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
                    664:   re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
                    665:   sed_extractcf="/$re_begincf/,/$re_endcf/p"
                    666: 
                    667:   # Validate tagname.
                    668:   case $tagname in
                    669:     *[!-_A-Za-z0-9,/]*)
                    670:       func_fatal_error "invalid tag name: $tagname"
                    671:       ;;
                    672:   esac
                    673: 
                    674:   # Don't test for the "default" C tag, as we know it's
                    675:   # there but not specially marked.
                    676:   case $tagname in
                    677:     CC) ;;
                    678:     *)
                    679:       if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
                    680:        taglist="$taglist $tagname"
                    681: 
                    682:        # Evaluate the configuration.  Be careful to quote the path
                    683:        # and the sed script, to avoid splitting on whitespace, but
                    684:        # also don't use non-portable quotes within backquotes within
                    685:        # quotes we have to do it in 2 steps:
                    686:        extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
                    687:        eval "$extractedcf"
                    688:       else
                    689:        func_error "ignoring unknown tag $tagname"
                    690:       fi
                    691:       ;;
                    692:   esac
                    693: }
                    694: 
                    695: # Parse options once, thoroughly.  This comes as soon as possible in
                    696: # the script to make things like `libtool --version' happen quickly.
                    697: {
                    698: 
                    699:   # Shorthand for --mode=foo, only valid as the first argument
                    700:   case $1 in
                    701:   clean|clea|cle|cl)
                    702:     shift; set dummy --mode clean ${1+"$@"}; shift
                    703:     ;;
                    704:   compile|compil|compi|comp|com|co|c)
                    705:     shift; set dummy --mode compile ${1+"$@"}; shift
                    706:     ;;
                    707:   execute|execut|execu|exec|exe|ex|e)
                    708:     shift; set dummy --mode execute ${1+"$@"}; shift
                    709:     ;;
                    710:   finish|finis|fini|fin|fi|f)
                    711:     shift; set dummy --mode finish ${1+"$@"}; shift
                    712:     ;;
                    713:   install|instal|insta|inst|ins|in|i)
                    714:     shift; set dummy --mode install ${1+"$@"}; shift
                    715:     ;;
                    716:   link|lin|li|l)
                    717:     shift; set dummy --mode link ${1+"$@"}; shift
                    718:     ;;
                    719:   uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
                    720:     shift; set dummy --mode uninstall ${1+"$@"}; shift
                    721:     ;;
                    722:   esac
                    723: 
                    724:   # Parse non-mode specific arguments:
                    725:   while test "$#" -gt 0; do
                    726:     opt="$1"
                    727:     shift
                    728: 
                    729:     case $opt in
                    730:       --config)                func_config                                     ;;
                    731: 
                    732:       --debug)         preserve_args="$preserve_args $opt"
                    733:                        func_echo "enabling shell trace mode"
                    734:                        opt_debug='set -x'
                    735:                        $opt_debug
                    736:                        ;;
                    737: 
                    738:       -dlopen)         test "$#" -eq 0 && func_missing_arg "$opt" && break
                    739:                        execute_dlfiles="$execute_dlfiles $1"
                    740:                        shift
                    741:                        ;;
                    742: 
                    743:       --dry-run | -n)  opt_dry_run=:                                   ;;
                    744:       --features)       func_features                                  ;;
                    745:       --finish)                mode="finish"                                   ;;
                    746: 
                    747:       --mode)          test "$#" -eq 0 && func_missing_arg "$opt" && break
                    748:                        case $1 in
                    749:                          # Valid mode arguments:
                    750:                          clean)        ;;
                    751:                          compile)      ;;
                    752:                          execute)      ;;
                    753:                          finish)       ;;
                    754:                          install)      ;;
                    755:                          link)         ;;
                    756:                          relink)       ;;
                    757:                          uninstall)    ;;
                    758: 
                    759:                          # Catch anything else as an error
                    760:                          *) func_error "invalid argument for $opt"
                    761:                             exit_cmd=exit
                    762:                             break
                    763:                             ;;
                    764:                        esac
                    765: 
                    766:                        mode="$1"
                    767:                        shift
                    768:                        ;;
                    769: 
                    770:       --preserve-dup-deps)
                    771:                        opt_duplicate_deps=:                            ;;
                    772: 
                    773:       --quiet|--silent)        preserve_args="$preserve_args $opt"
                    774:                        opt_silent=:
                    775:                        ;;
                    776: 
                    777:       --verbose| -v)   preserve_args="$preserve_args $opt"
                    778:                        opt_silent=false
                    779:                        ;;
                    780: 
                    781:       --tag)           test "$#" -eq 0 && func_missing_arg "$opt" && break
                    782:                        preserve_args="$preserve_args $opt $1"
                    783:                        func_enable_tag "$1"    # tagname is set here
                    784:                        shift
                    785:                        ;;
                    786: 
                    787:       # Separate optargs to long options:
                    788:       -dlopen=*|--mode=*|--tag=*)
                    789:                        func_opt_split "$opt"
                    790:                        set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
                    791:                        shift
                    792:                        ;;
                    793: 
                    794:       -\?|-h)          func_usage                                      ;;
                    795:       --help)          opt_help=:                                      ;;
                    796:       --version)       func_version                                    ;;
                    797: 
                    798:       -*)              func_fatal_help "unrecognized option \`$opt'"   ;;
                    799: 
                    800:       *)               nonopt="$opt"
                    801:                        break
                    802:                        ;;
                    803:     esac
                    804:   done
                    805: 
                    806: 
                    807:   case $host in
                    808:     *cygwin* | *mingw* | *pw32* | *cegcc*)
                    809:       # don't eliminate duplications in $postdeps and $predeps
                    810:       opt_duplicate_compiler_generated_deps=:
                    811:       ;;
                    812:     *)
                    813:       opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
                    814:       ;;
                    815:   esac
                    816: 
                    817:   # Having warned about all mis-specified options, bail out if
                    818:   # anything was wrong.
                    819:   $exit_cmd $EXIT_FAILURE
                    820: }
                    821: 
                    822: # func_check_version_match
                    823: # Ensure that we are using m4 macros, and libtool script from the same
                    824: # release of libtool.
                    825: func_check_version_match ()
                    826: {
                    827:   if test "$package_revision" != "$macro_revision"; then
                    828:     if test "$VERSION" != "$macro_version"; then
                    829:       if test -z "$macro_version"; then
                    830:         cat >&2 <<_LT_EOF
                    831: $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
                    832: $progname: definition of this LT_INIT comes from an older release.
                    833: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
                    834: $progname: and run autoconf again.
                    835: _LT_EOF
                    836:       else
                    837:         cat >&2 <<_LT_EOF
                    838: $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
                    839: $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
                    840: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
                    841: $progname: and run autoconf again.
                    842: _LT_EOF
                    843:       fi
                    844:     else
                    845:       cat >&2 <<_LT_EOF
                    846: $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
                    847: $progname: but the definition of this LT_INIT comes from revision $macro_revision.
                    848: $progname: You should recreate aclocal.m4 with macros from revision $package_revision
                    849: $progname: of $PACKAGE $VERSION and run autoconf again.
                    850: _LT_EOF
                    851:     fi
                    852: 
                    853:     exit $EXIT_MISMATCH
                    854:   fi
                    855: }
                    856: 
                    857: 
                    858: ## ----------- ##
                    859: ##    Main.    ##
                    860: ## ----------- ##
                    861: 
                    862: $opt_help || {
                    863:   # Sanity checks first:
                    864:   func_check_version_match
                    865: 
                    866:   if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
                    867:     func_fatal_configuration "not configured to build any kind of library"
                    868:   fi
                    869: 
                    870:   test -z "$mode" && func_fatal_error "error: you must specify a MODE."
                    871: 
                    872: 
                    873:   # Darwin sucks
                    874:   eval std_shrext=\"$shrext_cmds\"
                    875: 
                    876: 
                    877:   # Only execute mode is allowed to have -dlopen flags.
                    878:   if test -n "$execute_dlfiles" && test "$mode" != execute; then
                    879:     func_error "unrecognized option \`-dlopen'"
                    880:     $ECHO "$help" 1>&2
                    881:     exit $EXIT_FAILURE
                    882:   fi
                    883: 
                    884:   # Change the help message to a mode-specific one.
                    885:   generic_help="$help"
                    886:   help="Try \`$progname --help --mode=$mode' for more information."
                    887: }
                    888: 
                    889: 
                    890: # func_lalib_p file
                    891: # True iff FILE is a libtool `.la' library or `.lo' object file.
                    892: # This function is only a basic sanity check; it will hardly flush out
                    893: # determined imposters.
                    894: func_lalib_p ()
                    895: {
                    896:     test -f "$1" &&
                    897:       $SED -e 4q "$1" 2>/dev/null \
                    898:         | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
                    899: }
                    900: 
                    901: # func_lalib_unsafe_p file
                    902: # True iff FILE is a libtool `.la' library or `.lo' object file.
                    903: # This function implements the same check as func_lalib_p without
                    904: # resorting to external programs.  To this end, it redirects stdin and
                    905: # closes it afterwards, without saving the original file descriptor.
                    906: # As a safety measure, use it only where a negative result would be
                    907: # fatal anyway.  Works if `file' does not exist.
                    908: func_lalib_unsafe_p ()
                    909: {
                    910:     lalib_p=no
                    911:     if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
                    912:        for lalib_p_l in 1 2 3 4
                    913:        do
                    914:            read lalib_p_line
                    915:            case "$lalib_p_line" in
                    916:                \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
                    917:            esac
                    918:        done
                    919:        exec 0<&5 5<&-
                    920:     fi
                    921:     test "$lalib_p" = yes
                    922: }
                    923: 
                    924: # func_ltwrapper_script_p file
                    925: # True iff FILE is a libtool wrapper script
                    926: # This function is only a basic sanity check; it will hardly flush out
                    927: # determined imposters.
                    928: func_ltwrapper_script_p ()
                    929: {
                    930:     func_lalib_p "$1"
                    931: }
                    932: 
                    933: # func_ltwrapper_executable_p file
                    934: # True iff FILE is a libtool wrapper executable
                    935: # This function is only a basic sanity check; it will hardly flush out
                    936: # determined imposters.
                    937: func_ltwrapper_executable_p ()
                    938: {
                    939:     func_ltwrapper_exec_suffix=
                    940:     case $1 in
                    941:     *.exe) ;;
                    942:     *) func_ltwrapper_exec_suffix=.exe ;;
                    943:     esac
                    944:     $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
                    945: }
                    946: 
                    947: # func_ltwrapper_scriptname file
                    948: # Assumes file is an ltwrapper_executable
                    949: # uses $file to determine the appropriate filename for a
                    950: # temporary ltwrapper_script.
                    951: func_ltwrapper_scriptname ()
                    952: {
                    953:     func_ltwrapper_scriptname_result=""
                    954:     if func_ltwrapper_executable_p "$1"; then
                    955:        func_dirname_and_basename "$1" "" "."
                    956:        func_stripname '' '.exe' "$func_basename_result"
                    957:        func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
                    958:     fi
                    959: }
                    960: 
                    961: # func_ltwrapper_p file
                    962: # True iff FILE is a libtool wrapper script or wrapper executable
                    963: # This function is only a basic sanity check; it will hardly flush out
                    964: # determined imposters.
                    965: func_ltwrapper_p ()
                    966: {
                    967:     func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
                    968: }
                    969: 
                    970: 
                    971: # func_execute_cmds commands fail_cmd
                    972: # Execute tilde-delimited COMMANDS.
                    973: # If FAIL_CMD is given, eval that upon failure.
                    974: # FAIL_CMD may read-access the current command in variable CMD!
                    975: func_execute_cmds ()
                    976: {
                    977:     $opt_debug
                    978:     save_ifs=$IFS; IFS='~'
                    979:     for cmd in $1; do
                    980:       IFS=$save_ifs
                    981:       eval cmd=\"$cmd\"
                    982:       func_show_eval "$cmd" "${2-:}"
                    983:     done
                    984:     IFS=$save_ifs
                    985: }
                    986: 
                    987: 
                    988: # func_source file
                    989: # Source FILE, adding directory component if necessary.
                    990: # Note that it is not necessary on cygwin/mingw to append a dot to
                    991: # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
                    992: # behavior happens only for exec(3), not for open(2)!  Also, sourcing
                    993: # `FILE.' does not work on cygwin managed mounts.
                    994: func_source ()
                    995: {
                    996:     $opt_debug
                    997:     case $1 in
                    998:     */* | *\\*)        . "$1" ;;
                    999:     *)         . "./$1" ;;
                   1000:     esac
                   1001: }
                   1002: 
                   1003: 
                   1004: # func_infer_tag arg
                   1005: # Infer tagged configuration to use if any are available and
                   1006: # if one wasn't chosen via the "--tag" command line option.
                   1007: # Only attempt this if the compiler in the base compile
                   1008: # command doesn't match the default compiler.
                   1009: # arg is usually of the form 'gcc ...'
                   1010: func_infer_tag ()
                   1011: {
                   1012:     $opt_debug
                   1013:     if test -n "$available_tags" && test -z "$tagname"; then
                   1014:       CC_quoted=
                   1015:       for arg in $CC; do
                   1016:         func_quote_for_eval "$arg"
                   1017:        CC_quoted="$CC_quoted $func_quote_for_eval_result"
                   1018:       done
                   1019:       case $@ in
                   1020:       # Blanks in the command may have been stripped by the calling shell,
                   1021:       # but not from the CC environment variable when configure was run.
                   1022:       " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
                   1023:       # Blanks at the start of $base_compile will cause this to fail
                   1024:       # if we don't check for them as well.
                   1025:       *)
                   1026:        for z in $available_tags; do
                   1027:          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
                   1028:            # Evaluate the configuration.
                   1029:            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
                   1030:            CC_quoted=
                   1031:            for arg in $CC; do
                   1032:              # Double-quote args containing other shell metacharacters.
                   1033:              func_quote_for_eval "$arg"
                   1034:              CC_quoted="$CC_quoted $func_quote_for_eval_result"
                   1035:            done
                   1036:            case "$@ " in
                   1037:              " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
                   1038:              # The compiler in the base compile command matches
                   1039:              # the one in the tagged configuration.
                   1040:              # Assume this is the tagged configuration we want.
                   1041:              tagname=$z
                   1042:              break
                   1043:              ;;
                   1044:            esac
                   1045:          fi
                   1046:        done
                   1047:        # If $tagname still isn't set, then no tagged configuration
                   1048:        # was found and let the user know that the "--tag" command
                   1049:        # line option must be used.
                   1050:        if test -z "$tagname"; then
                   1051:          func_echo "unable to infer tagged configuration"
                   1052:          func_fatal_error "specify a tag with \`--tag'"
                   1053: #      else
                   1054: #        func_verbose "using $tagname tagged configuration"
                   1055:        fi
                   1056:        ;;
                   1057:       esac
                   1058:     fi
                   1059: }
                   1060: 
                   1061: 
                   1062: 
                   1063: # func_write_libtool_object output_name pic_name nonpic_name
                   1064: # Create a libtool object file (analogous to a ".la" file),
                   1065: # but don't create it if we're doing a dry run.
                   1066: func_write_libtool_object ()
                   1067: {
                   1068:     write_libobj=${1}
                   1069:     if test "$build_libtool_libs" = yes; then
                   1070:       write_lobj=\'${2}\'
                   1071:     else
                   1072:       write_lobj=none
                   1073:     fi
                   1074: 
                   1075:     if test "$build_old_libs" = yes; then
                   1076:       write_oldobj=\'${3}\'
                   1077:     else
                   1078:       write_oldobj=none
                   1079:     fi
                   1080: 
                   1081:     $opt_dry_run || {
                   1082:       cat >${write_libobj}T <<EOF
                   1083: # $write_libobj - a libtool object file
                   1084: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
                   1085: #
                   1086: # Please DO NOT delete this file!
                   1087: # It is necessary for linking the library.
                   1088: 
                   1089: # Name of the PIC object.
                   1090: pic_object=$write_lobj
                   1091: 
                   1092: # Name of the non-PIC object
                   1093: non_pic_object=$write_oldobj
                   1094: 
                   1095: EOF
                   1096:       $MV "${write_libobj}T" "${write_libobj}"
                   1097:     }
                   1098: }
                   1099: 
                   1100: # func_mode_compile arg...
                   1101: func_mode_compile ()
                   1102: {
                   1103:     $opt_debug
                   1104:     # Get the compilation command and the source file.
                   1105:     base_compile=
                   1106:     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
                   1107:     suppress_opt=yes
                   1108:     suppress_output=
                   1109:     arg_mode=normal
                   1110:     libobj=
                   1111:     later=
                   1112:     pie_flag=
                   1113: 
                   1114:     for arg
                   1115:     do
                   1116:       case $arg_mode in
                   1117:       arg  )
                   1118:        # do not "continue".  Instead, add this to base_compile
                   1119:        lastarg="$arg"
                   1120:        arg_mode=normal
                   1121:        ;;
                   1122: 
                   1123:       target )
                   1124:        libobj="$arg"
                   1125:        arg_mode=normal
                   1126:        continue
                   1127:        ;;
                   1128: 
                   1129:       normal )
                   1130:        # Accept any command-line options.
                   1131:        case $arg in
                   1132:        -o)
                   1133:          test -n "$libobj" && \
                   1134:            func_fatal_error "you cannot specify \`-o' more than once"
                   1135:          arg_mode=target
                   1136:          continue
                   1137:          ;;
                   1138: 
                   1139:        -pie | -fpie | -fPIE)
                   1140:           pie_flag="$pie_flag $arg"
                   1141:          continue
                   1142:          ;;
                   1143: 
                   1144:        -shared | -static | -prefer-pic | -prefer-non-pic)
                   1145:          later="$later $arg"
                   1146:          continue
                   1147:          ;;
                   1148: 
                   1149:        -no-suppress)
                   1150:          suppress_opt=no
                   1151:          continue
                   1152:          ;;
                   1153: 
                   1154:        -Xcompiler)
                   1155:          arg_mode=arg  #  the next one goes into the "base_compile" arg list
                   1156:          continue      #  The current "srcfile" will either be retained or
                   1157:          ;;            #  replaced later.  I would guess that would be a bug.
                   1158: 
                   1159:        -Wc,*)
                   1160:          func_stripname '-Wc,' '' "$arg"
                   1161:          args=$func_stripname_result
                   1162:          lastarg=
                   1163:          save_ifs="$IFS"; IFS=','
                   1164:          for arg in $args; do
                   1165:            IFS="$save_ifs"
                   1166:            func_quote_for_eval "$arg"
                   1167:            lastarg="$lastarg $func_quote_for_eval_result"
                   1168:          done
                   1169:          IFS="$save_ifs"
                   1170:          func_stripname ' ' '' "$lastarg"
                   1171:          lastarg=$func_stripname_result
                   1172: 
                   1173:          # Add the arguments to base_compile.
                   1174:          base_compile="$base_compile $lastarg"
                   1175:          continue
                   1176:          ;;
                   1177: 
                   1178:        *)
                   1179:          # Accept the current argument as the source file.
                   1180:          # The previous "srcfile" becomes the current argument.
                   1181:          #
                   1182:          lastarg="$srcfile"
                   1183:          srcfile="$arg"
                   1184:          ;;
                   1185:        esac  #  case $arg
                   1186:        ;;
                   1187:       esac    #  case $arg_mode
                   1188: 
                   1189:       # Aesthetically quote the previous argument.
                   1190:       func_quote_for_eval "$lastarg"
                   1191:       base_compile="$base_compile $func_quote_for_eval_result"
                   1192:     done # for arg
                   1193: 
                   1194:     case $arg_mode in
                   1195:     arg)
                   1196:       func_fatal_error "you must specify an argument for -Xcompile"
                   1197:       ;;
                   1198:     target)
                   1199:       func_fatal_error "you must specify a target with \`-o'"
                   1200:       ;;
                   1201:     *)
                   1202:       # Get the name of the library object.
                   1203:       test -z "$libobj" && {
                   1204:        func_basename "$srcfile"
                   1205:        libobj="$func_basename_result"
                   1206:       }
                   1207:       ;;
                   1208:     esac
                   1209: 
                   1210:     # Recognize several different file suffixes.
                   1211:     # If the user specifies -o file.o, it is replaced with file.lo
                   1212:     case $libobj in
                   1213:     *.[cCFSifmso] | \
                   1214:     *.ada | *.adb | *.ads | *.asm | \
                   1215:     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
                   1216:     *.[fF][09]? | *.for | *.java | *.obj | *.sx)
                   1217:       func_xform "$libobj"
                   1218:       libobj=$func_xform_result
                   1219:       ;;
                   1220:     esac
                   1221: 
                   1222:     case $libobj in
                   1223:     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
                   1224:     *)
                   1225:       func_fatal_error "cannot determine name of library object from \`$libobj'"
                   1226:       ;;
                   1227:     esac
                   1228: 
                   1229:     func_infer_tag $base_compile
                   1230: 
                   1231:     for arg in $later; do
                   1232:       case $arg in
                   1233:       -shared)
                   1234:        test "$build_libtool_libs" != yes && \
                   1235:          func_fatal_configuration "can not build a shared library"
                   1236:        build_old_libs=no
                   1237:        continue
                   1238:        ;;
                   1239: 
                   1240:       -static)
                   1241:        build_libtool_libs=no
                   1242:        build_old_libs=yes
                   1243:        continue
                   1244:        ;;
                   1245: 
                   1246:       -prefer-pic)
                   1247:        pic_mode=yes
                   1248:        continue
                   1249:        ;;
                   1250: 
                   1251:       -prefer-non-pic)
                   1252:        pic_mode=no
                   1253:        continue
                   1254:        ;;
                   1255:       esac
                   1256:     done
                   1257: 
                   1258:     func_quote_for_eval "$libobj"
                   1259:     test "X$libobj" != "X$func_quote_for_eval_result" \
                   1260:       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'   &()|`$[]' \
                   1261:       && func_warning "libobj name \`$libobj' may not contain shell special characters."
                   1262:     func_dirname_and_basename "$obj" "/" ""
                   1263:     objname="$func_basename_result"
                   1264:     xdir="$func_dirname_result"
                   1265:     lobj=${xdir}$objdir/$objname
                   1266: 
                   1267:     test -z "$base_compile" && \
                   1268:       func_fatal_help "you must specify a compilation command"
                   1269: 
                   1270:     # Delete any leftover library objects.
                   1271:     if test "$build_old_libs" = yes; then
                   1272:       removelist="$obj $lobj $libobj ${libobj}T"
                   1273:     else
                   1274:       removelist="$lobj $libobj ${libobj}T"
                   1275:     fi
                   1276: 
                   1277:     # On Cygwin there's no "real" PIC flag so we must build both object types
                   1278:     case $host_os in
                   1279:     cygwin* | mingw* | pw32* | os2* | cegcc*)
                   1280:       pic_mode=default
                   1281:       ;;
                   1282:     esac
                   1283:     if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
                   1284:       # non-PIC code in shared libraries is not supported
                   1285:       pic_mode=default
                   1286:     fi
                   1287: 
                   1288:     # Calculate the filename of the output object if compiler does
                   1289:     # not support -o with -c
                   1290:     if test "$compiler_c_o" = no; then
                   1291:       output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
                   1292:       lockfile="$output_obj.lock"
                   1293:     else
                   1294:       output_obj=
                   1295:       need_locks=no
                   1296:       lockfile=
                   1297:     fi
                   1298: 
                   1299:     # Lock this critical section if it is needed
                   1300:     # We use this script file to make the link, it avoids creating a new file
                   1301:     if test "$need_locks" = yes; then
                   1302:       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
                   1303:        func_echo "Waiting for $lockfile to be removed"
                   1304:        sleep 2
                   1305:       done
                   1306:     elif test "$need_locks" = warn; then
                   1307:       if test -f "$lockfile"; then
                   1308:        $ECHO "\
                   1309: *** ERROR, $lockfile exists and contains:
                   1310: `cat $lockfile 2>/dev/null`
                   1311: 
                   1312: This indicates that another process is trying to use the same
                   1313: temporary object file, and libtool could not work around it because
                   1314: your compiler does not support \`-c' and \`-o' together.  If you
                   1315: repeat this compilation, it may succeed, by chance, but you had better
                   1316: avoid parallel builds (make -j) in this platform, or get a better
                   1317: compiler."
                   1318: 
                   1319:        $opt_dry_run || $RM $removelist
                   1320:        exit $EXIT_FAILURE
                   1321:       fi
                   1322:       removelist="$removelist $output_obj"
                   1323:       $ECHO "$srcfile" > "$lockfile"
                   1324:     fi
                   1325: 
                   1326:     $opt_dry_run || $RM $removelist
                   1327:     removelist="$removelist $lockfile"
                   1328:     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
                   1329: 
                   1330:     if test -n "$fix_srcfile_path"; then
                   1331:       eval srcfile=\"$fix_srcfile_path\"
                   1332:     fi
                   1333:     func_quote_for_eval "$srcfile"
                   1334:     qsrcfile=$func_quote_for_eval_result
                   1335: 
                   1336:     # Only build a PIC object if we are building libtool libraries.
                   1337:     if test "$build_libtool_libs" = yes; then
                   1338:       # Without this assignment, base_compile gets emptied.
                   1339:       fbsd_hideous_sh_bug=$base_compile
                   1340: 
                   1341:       if test "$pic_mode" != no; then
                   1342:        command="$base_compile $qsrcfile $pic_flag"
                   1343:       else
                   1344:        # Don't build PIC code
                   1345:        command="$base_compile $qsrcfile"
                   1346:       fi
                   1347: 
                   1348:       func_mkdir_p "$xdir$objdir"
                   1349: 
                   1350:       if test -z "$output_obj"; then
                   1351:        # Place PIC objects in $objdir
                   1352:        command="$command -o $lobj"
                   1353:       fi
                   1354: 
                   1355:       func_show_eval_locale "$command" \
                   1356:           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
                   1357: 
                   1358:       if test "$need_locks" = warn &&
                   1359:         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
                   1360:        $ECHO "\
                   1361: *** ERROR, $lockfile contains:
                   1362: `cat $lockfile 2>/dev/null`
                   1363: 
                   1364: but it should contain:
                   1365: $srcfile
                   1366: 
                   1367: This indicates that another process is trying to use the same
                   1368: temporary object file, and libtool could not work around it because
                   1369: your compiler does not support \`-c' and \`-o' together.  If you
                   1370: repeat this compilation, it may succeed, by chance, but you had better
                   1371: avoid parallel builds (make -j) in this platform, or get a better
                   1372: compiler."
                   1373: 
                   1374:        $opt_dry_run || $RM $removelist
                   1375:        exit $EXIT_FAILURE
                   1376:       fi
                   1377: 
                   1378:       # Just move the object if needed, then go on to compile the next one
                   1379:       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
                   1380:        func_show_eval '$MV "$output_obj" "$lobj"' \
                   1381:          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
                   1382:       fi
                   1383: 
                   1384:       # Allow error messages only from the first compilation.
                   1385:       if test "$suppress_opt" = yes; then
                   1386:        suppress_output=' >/dev/null 2>&1'
                   1387:       fi
                   1388:     fi
                   1389: 
                   1390:     # Only build a position-dependent object if we build old libraries.
                   1391:     if test "$build_old_libs" = yes; then
                   1392:       if test "$pic_mode" != yes; then
                   1393:        # Don't build PIC code
                   1394:        command="$base_compile $qsrcfile$pie_flag"
                   1395:       else
                   1396:        command="$base_compile $qsrcfile $pic_flag"
                   1397:       fi
                   1398:       if test "$compiler_c_o" = yes; then
                   1399:        command="$command -o $obj"
                   1400:       fi
                   1401: 
                   1402:       # Suppress compiler output if we already did a PIC compilation.
                   1403:       command="$command$suppress_output"
                   1404:       func_show_eval_locale "$command" \
                   1405:         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
                   1406: 
                   1407:       if test "$need_locks" = warn &&
                   1408:         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
                   1409:        $ECHO "\
                   1410: *** ERROR, $lockfile contains:
                   1411: `cat $lockfile 2>/dev/null`
                   1412: 
                   1413: but it should contain:
                   1414: $srcfile
                   1415: 
                   1416: This indicates that another process is trying to use the same
                   1417: temporary object file, and libtool could not work around it because
                   1418: your compiler does not support \`-c' and \`-o' together.  If you
                   1419: repeat this compilation, it may succeed, by chance, but you had better
                   1420: avoid parallel builds (make -j) in this platform, or get a better
                   1421: compiler."
                   1422: 
                   1423:        $opt_dry_run || $RM $removelist
                   1424:        exit $EXIT_FAILURE
                   1425:       fi
                   1426: 
                   1427:       # Just move the object if needed
                   1428:       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
                   1429:        func_show_eval '$MV "$output_obj" "$obj"' \
                   1430:          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
                   1431:       fi
                   1432:     fi
                   1433: 
                   1434:     $opt_dry_run || {
                   1435:       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
                   1436: 
                   1437:       # Unlock the critical section if it was locked
                   1438:       if test "$need_locks" != no; then
                   1439:        removelist=$lockfile
                   1440:         $RM "$lockfile"
                   1441:       fi
                   1442:     }
                   1443: 
                   1444:     exit $EXIT_SUCCESS
                   1445: }
                   1446: 
                   1447: $opt_help || {
                   1448: test "$mode" = compile && func_mode_compile ${1+"$@"}
                   1449: }
                   1450: 
                   1451: func_mode_help ()
                   1452: {
                   1453:     # We need to display help for each of the modes.
                   1454:     case $mode in
                   1455:       "")
                   1456:         # Generic help is extracted from the usage comments
                   1457:         # at the start of this file.
                   1458:         func_help
                   1459:         ;;
                   1460: 
                   1461:       clean)
                   1462:         $ECHO \
                   1463: "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
                   1464: 
                   1465: Remove files from the build directory.
                   1466: 
                   1467: RM is the name of the program to use to delete files associated with each FILE
                   1468: (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
                   1469: to RM.
                   1470: 
                   1471: If FILE is a libtool library, object or program, all the files associated
                   1472: with it are deleted. Otherwise, only FILE itself is deleted using RM."
                   1473:         ;;
                   1474: 
                   1475:       compile)
                   1476:       $ECHO \
                   1477: "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
                   1478: 
                   1479: Compile a source file into a libtool library object.
                   1480: 
                   1481: This mode accepts the following additional options:
                   1482: 
                   1483:   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
                   1484:   -no-suppress      do not suppress compiler output for multiple passes
                   1485:   -prefer-pic       try to building PIC objects only
                   1486:   -prefer-non-pic   try to building non-PIC objects only
                   1487:   -shared           do not build a \`.o' file suitable for static linking
                   1488:   -static           only build a \`.o' file suitable for static linking
                   1489: 
                   1490: COMPILE-COMMAND is a command to be used in creating a \`standard' object file
                   1491: from the given SOURCEFILE.
                   1492: 
                   1493: The output file name is determined by removing the directory component from
                   1494: SOURCEFILE, then substituting the C source code suffix \`.c' with the
                   1495: library object suffix, \`.lo'."
                   1496:         ;;
                   1497: 
                   1498:       execute)
                   1499:         $ECHO \
                   1500: "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
                   1501: 
                   1502: Automatically set library path, then run a program.
                   1503: 
                   1504: This mode accepts the following additional options:
                   1505: 
                   1506:   -dlopen FILE      add the directory containing FILE to the library path
                   1507: 
                   1508: This mode sets the library path environment variable according to \`-dlopen'
                   1509: flags.
                   1510: 
                   1511: If any of the ARGS are libtool executable wrappers, then they are translated
                   1512: into their corresponding uninstalled binary, and any of their required library
                   1513: directories are added to the library path.
                   1514: 
                   1515: Then, COMMAND is executed, with ARGS as arguments."
                   1516:         ;;
                   1517: 
                   1518:       finish)
                   1519:         $ECHO \
                   1520: "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
                   1521: 
                   1522: Complete the installation of libtool libraries.
                   1523: 
                   1524: Each LIBDIR is a directory that contains libtool libraries.
                   1525: 
                   1526: The commands that this mode executes may require superuser privileges.  Use
                   1527: the \`--dry-run' option if you just want to see what would be executed."
                   1528:         ;;
                   1529: 
                   1530:       install)
                   1531:         $ECHO \
                   1532: "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
                   1533: 
                   1534: Install executables or libraries.
                   1535: 
                   1536: INSTALL-COMMAND is the installation command.  The first component should be
                   1537: either the \`install' or \`cp' program.
                   1538: 
                   1539: The following components of INSTALL-COMMAND are treated specially:
                   1540: 
                   1541:   -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
                   1542: 
                   1543: The rest of the components are interpreted as arguments to that command (only
                   1544: BSD-compatible install options are recognized)."
                   1545:         ;;
                   1546: 
                   1547:       link)
                   1548:         $ECHO \
                   1549: "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
                   1550: 
                   1551: Link object files or libraries together to form another library, or to
                   1552: create an executable program.
                   1553: 
                   1554: LINK-COMMAND is a command using the C compiler that you would use to create
                   1555: a program from several object files.
                   1556: 
                   1557: The following components of LINK-COMMAND are treated specially:
                   1558: 
                   1559:   -all-static       do not do any dynamic linking at all
                   1560:   -avoid-version    do not add a version suffix if possible
                   1561:   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
                   1562:   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
                   1563:   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
                   1564:   -export-symbols SYMFILE
                   1565:                     try to export only the symbols listed in SYMFILE
                   1566:   -export-symbols-regex REGEX
                   1567:                     try to export only the symbols matching REGEX
                   1568:   -LLIBDIR          search LIBDIR for required installed libraries
                   1569:   -lNAME            OUTPUT-FILE requires the installed library libNAME
                   1570:   -module           build a library that can dlopened
                   1571:   -no-fast-install  disable the fast-install mode
                   1572:   -no-install       link a not-installable executable
                   1573:   -no-undefined     declare that a library does not refer to external symbols
                   1574:   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
                   1575:   -objectlist FILE  Use a list of object files found in FILE to specify objects
                   1576:   -precious-files-regex REGEX
                   1577:                     don't remove output files matching REGEX
                   1578:   -release RELEASE  specify package release information
                   1579:   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
                   1580:   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
                   1581:   -shared           only do dynamic linking of libtool libraries
                   1582:   -shrext SUFFIX    override the standard shared library file extension
                   1583:   -static           do not do any dynamic linking of uninstalled libtool libraries
                   1584:   -static-libtool-libs
                   1585:                     do not do any dynamic linking of libtool libraries
                   1586:   -version-info CURRENT[:REVISION[:AGE]]
                   1587:                     specify library version info [each variable defaults to 0]
                   1588:   -weak LIBNAME     declare that the target provides the LIBNAME interface
                   1589: 
                   1590: All other options (arguments beginning with \`-') are ignored.
                   1591: 
                   1592: Every other argument is treated as a filename.  Files ending in \`.la' are
                   1593: treated as uninstalled libtool libraries, other files are standard or library
                   1594: object files.
                   1595: 
                   1596: If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
                   1597: only library objects (\`.lo' files) may be specified, and \`-rpath' is
                   1598: required, except when creating a convenience library.
                   1599: 
                   1600: If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
                   1601: using \`ar' and \`ranlib', or on Windows using \`lib'.
                   1602: 
                   1603: If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
                   1604: is created, otherwise an executable program is created."
                   1605:         ;;
                   1606: 
                   1607:       uninstall)
                   1608:         $ECHO \
                   1609: "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
                   1610: 
                   1611: Remove libraries from an installation directory.
                   1612: 
                   1613: RM is the name of the program to use to delete files associated with each FILE
                   1614: (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
                   1615: to RM.
                   1616: 
                   1617: If FILE is a libtool library, all the files associated with it are deleted.
                   1618: Otherwise, only FILE itself is deleted using RM."
                   1619:         ;;
                   1620: 
                   1621:       *)
                   1622:         func_fatal_help "invalid operation mode \`$mode'"
                   1623:         ;;
                   1624:     esac
                   1625: 
                   1626:     $ECHO
                   1627:     $ECHO "Try \`$progname --help' for more information about other modes."
                   1628: 
                   1629:     exit $?
                   1630: }
                   1631: 
                   1632:   # Now that we've collected a possible --mode arg, show help if necessary
                   1633:   $opt_help && func_mode_help
                   1634: 
                   1635: 
                   1636: # func_mode_execute arg...
                   1637: func_mode_execute ()
                   1638: {
                   1639:     $opt_debug
                   1640:     # The first argument is the command name.
                   1641:     cmd="$nonopt"
                   1642:     test -z "$cmd" && \
                   1643:       func_fatal_help "you must specify a COMMAND"
                   1644: 
                   1645:     # Handle -dlopen flags immediately.
                   1646:     for file in $execute_dlfiles; do
                   1647:       test -f "$file" \
                   1648:        || func_fatal_help "\`$file' is not a file"
                   1649: 
                   1650:       dir=
                   1651:       case $file in
                   1652:       *.la)
                   1653:        # Check to see that this really is a libtool archive.
                   1654:        func_lalib_unsafe_p "$file" \
                   1655:          || func_fatal_help "\`$lib' is not a valid libtool archive"
                   1656: 
                   1657:        # Read the libtool library.
                   1658:        dlname=
                   1659:        library_names=
                   1660:        func_source "$file"
                   1661: 
                   1662:        # Skip this library if it cannot be dlopened.
                   1663:        if test -z "$dlname"; then
                   1664:          # Warn if it was a shared library.
                   1665:          test -n "$library_names" && \
                   1666:            func_warning "\`$file' was not linked with \`-export-dynamic'"
                   1667:          continue
                   1668:        fi
                   1669: 
                   1670:        func_dirname "$file" "" "."
                   1671:        dir="$func_dirname_result"
                   1672: 
                   1673:        if test -f "$dir/$objdir/$dlname"; then
                   1674:          dir="$dir/$objdir"
                   1675:        else
                   1676:          if test ! -f "$dir/$dlname"; then
                   1677:            func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
                   1678:          fi
                   1679:        fi
                   1680:        ;;
                   1681: 
                   1682:       *.lo)
                   1683:        # Just add the directory containing the .lo file.
                   1684:        func_dirname "$file" "" "."
                   1685:        dir="$func_dirname_result"
                   1686:        ;;
                   1687: 
                   1688:       *)
                   1689:        func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
                   1690:        continue
                   1691:        ;;
                   1692:       esac
                   1693: 
                   1694:       # Get the absolute pathname.
                   1695:       absdir=`cd "$dir" && pwd`
                   1696:       test -n "$absdir" && dir="$absdir"
                   1697: 
                   1698:       # Now add the directory to shlibpath_var.
                   1699:       if eval "test -z \"\$$shlibpath_var\""; then
                   1700:        eval "$shlibpath_var=\"\$dir\""
                   1701:       else
                   1702:        eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
                   1703:       fi
                   1704:     done
                   1705: 
                   1706:     # This variable tells wrapper scripts just to set shlibpath_var
                   1707:     # rather than running their programs.
                   1708:     libtool_execute_magic="$magic"
                   1709: 
                   1710:     # Check if any of the arguments is a wrapper script.
                   1711:     args=
                   1712:     for file
                   1713:     do
                   1714:       case $file in
                   1715:       -*) ;;
                   1716:       *)
                   1717:        # Do a test to see if this is really a libtool program.
                   1718:        if func_ltwrapper_script_p "$file"; then
                   1719:          func_source "$file"
                   1720:          # Transform arg to wrapped name.
                   1721:          file="$progdir/$program"
                   1722:        elif func_ltwrapper_executable_p "$file"; then
                   1723:          func_ltwrapper_scriptname "$file"
                   1724:          func_source "$func_ltwrapper_scriptname_result"
                   1725:          # Transform arg to wrapped name.
                   1726:          file="$progdir/$program"
                   1727:        fi
                   1728:        ;;
                   1729:       esac
                   1730:       # Quote arguments (to preserve shell metacharacters).
                   1731:       func_quote_for_eval "$file"
                   1732:       args="$args $func_quote_for_eval_result"
                   1733:     done
                   1734: 
                   1735:     if test "X$opt_dry_run" = Xfalse; then
                   1736:       if test -n "$shlibpath_var"; then
                   1737:        # Export the shlibpath_var.
                   1738:        eval "export $shlibpath_var"
                   1739:       fi
                   1740: 
                   1741:       # Restore saved environment variables
                   1742:       for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
                   1743:       do
                   1744:        eval "if test \"\${save_$lt_var+set}\" = set; then
                   1745:                 $lt_var=\$save_$lt_var; export $lt_var
                   1746:              else
                   1747:                $lt_unset $lt_var
                   1748:              fi"
                   1749:       done
                   1750: 
                   1751:       # Now prepare to actually exec the command.
                   1752:       exec_cmd="\$cmd$args"
                   1753:     else
                   1754:       # Display what would be done.
                   1755:       if test -n "$shlibpath_var"; then
                   1756:        eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
                   1757:        $ECHO "export $shlibpath_var"
                   1758:       fi
                   1759:       $ECHO "$cmd$args"
                   1760:       exit $EXIT_SUCCESS
                   1761:     fi
                   1762: }
                   1763: 
                   1764: test "$mode" = execute && func_mode_execute ${1+"$@"}
                   1765: 
                   1766: 
                   1767: # func_mode_finish arg...
                   1768: func_mode_finish ()
                   1769: {
                   1770:     $opt_debug
                   1771:     libdirs="$nonopt"
                   1772:     admincmds=
                   1773: 
                   1774:     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
                   1775:       for dir
                   1776:       do
                   1777:        libdirs="$libdirs $dir"
                   1778:       done
                   1779: 
                   1780:       for libdir in $libdirs; do
                   1781:        if test -n "$finish_cmds"; then
                   1782:          # Do each command in the finish commands.
                   1783:          func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
                   1784: '"$cmd"'"'
                   1785:        fi
                   1786:        if test -n "$finish_eval"; then
                   1787:          # Do the single finish_eval.
                   1788:          eval cmds=\"$finish_eval\"
                   1789:          $opt_dry_run || eval "$cmds" || admincmds="$admincmds
                   1790:        $cmds"
                   1791:        fi
                   1792:       done
                   1793:     fi
                   1794: 
                   1795:     # Exit here if they wanted silent mode.
                   1796:     $opt_silent && exit $EXIT_SUCCESS
                   1797: 
                   1798:     $ECHO "X----------------------------------------------------------------------" | $Xsed
                   1799:     $ECHO "Libraries have been installed in:"
                   1800:     for libdir in $libdirs; do
                   1801:       $ECHO "   $libdir"
                   1802:     done
                   1803:     $ECHO
                   1804:     $ECHO "If you ever happen to want to link against installed libraries"
                   1805:     $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
                   1806:     $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
                   1807:     $ECHO "flag during linking and do at least one of the following:"
                   1808:     if test -n "$shlibpath_var"; then
                   1809:       $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
                   1810:       $ECHO "     during execution"
                   1811:     fi
                   1812:     if test -n "$runpath_var"; then
                   1813:       $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
                   1814:       $ECHO "     during linking"
                   1815:     fi
                   1816:     if test -n "$hardcode_libdir_flag_spec"; then
                   1817:       libdir=LIBDIR
                   1818:       eval flag=\"$hardcode_libdir_flag_spec\"
                   1819: 
                   1820:       $ECHO "   - use the \`$flag' linker flag"
                   1821:     fi
                   1822:     if test -n "$admincmds"; then
                   1823:       $ECHO "   - have your system administrator run these commands:$admincmds"
                   1824:     fi
                   1825:     if test -f /etc/ld.so.conf; then
                   1826:       $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
                   1827:     fi
                   1828:     $ECHO
                   1829: 
                   1830:     $ECHO "See any operating system documentation about shared libraries for"
                   1831:     case $host in
                   1832:       solaris2.[6789]|solaris2.1[0-9])
                   1833:         $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
                   1834:        $ECHO "pages."
                   1835:        ;;
                   1836:       *)
                   1837:         $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
                   1838:         ;;
                   1839:     esac
                   1840:     $ECHO "X----------------------------------------------------------------------" | $Xsed
                   1841:     exit $EXIT_SUCCESS
                   1842: }
                   1843: 
                   1844: test "$mode" = finish && func_mode_finish ${1+"$@"}
                   1845: 
                   1846: 
                   1847: # func_mode_install arg...
                   1848: func_mode_install ()
                   1849: {
                   1850:     $opt_debug
                   1851:     # There may be an optional sh(1) argument at the beginning of
                   1852:     # install_prog (especially on Windows NT).
                   1853:     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
                   1854:        # Allow the use of GNU shtool's install command.
                   1855:        $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
                   1856:       # Aesthetically quote it.
                   1857:       func_quote_for_eval "$nonopt"
                   1858:       install_prog="$func_quote_for_eval_result "
                   1859:       arg=$1
                   1860:       shift
                   1861:     else
                   1862:       install_prog=
                   1863:       arg=$nonopt
                   1864:     fi
                   1865: 
                   1866:     # The real first argument should be the name of the installation program.
                   1867:     # Aesthetically quote it.
                   1868:     func_quote_for_eval "$arg"
                   1869:     install_prog="$install_prog$func_quote_for_eval_result"
                   1870: 
                   1871:     # We need to accept at least all the BSD install flags.
                   1872:     dest=
                   1873:     files=
                   1874:     opts=
                   1875:     prev=
                   1876:     install_type=
                   1877:     isdir=no
                   1878:     stripme=
                   1879:     for arg
                   1880:     do
                   1881:       if test -n "$dest"; then
                   1882:        files="$files $dest"
                   1883:        dest=$arg
                   1884:        continue
                   1885:       fi
                   1886: 
                   1887:       case $arg in
                   1888:       -d) isdir=yes ;;
                   1889:       -f)
                   1890:        case " $install_prog " in
                   1891:        *[\\\ /]cp\ *) ;;
                   1892:        *) prev=$arg ;;
                   1893:        esac
                   1894:        ;;
                   1895:       -g | -m | -o)
                   1896:        prev=$arg
                   1897:        ;;
                   1898:       -s)
                   1899:        stripme=" -s"
                   1900:        continue
                   1901:        ;;
                   1902:       -*)
                   1903:        ;;
                   1904:       *)
                   1905:        # If the previous option needed an argument, then skip it.
                   1906:        if test -n "$prev"; then
                   1907:          prev=
                   1908:        else
                   1909:          dest=$arg
                   1910:          continue
                   1911:        fi
                   1912:        ;;
                   1913:       esac
                   1914: 
                   1915:       # Aesthetically quote the argument.
                   1916:       func_quote_for_eval "$arg"
                   1917:       install_prog="$install_prog $func_quote_for_eval_result"
                   1918:     done
                   1919: 
                   1920:     test -z "$install_prog" && \
                   1921:       func_fatal_help "you must specify an install program"
                   1922: 
                   1923:     test -n "$prev" && \
                   1924:       func_fatal_help "the \`$prev' option requires an argument"
                   1925: 
                   1926:     if test -z "$files"; then
                   1927:       if test -z "$dest"; then
                   1928:        func_fatal_help "no file or destination specified"
                   1929:       else
                   1930:        func_fatal_help "you must specify a destination"
                   1931:       fi
                   1932:     fi
                   1933: 
                   1934:     # Strip any trailing slash from the destination.
                   1935:     func_stripname '' '/' "$dest"
                   1936:     dest=$func_stripname_result
                   1937: 
                   1938:     # Check to see that the destination is a directory.
                   1939:     test -d "$dest" && isdir=yes
                   1940:     if test "$isdir" = yes; then
                   1941:       destdir="$dest"
                   1942:       destname=
                   1943:     else
                   1944:       func_dirname_and_basename "$dest" "" "."
                   1945:       destdir="$func_dirname_result"
                   1946:       destname="$func_basename_result"
                   1947: 
                   1948:       # Not a directory, so check to see that there is only one file specified.
                   1949:       set dummy $files; shift
                   1950:       test "$#" -gt 1 && \
                   1951:        func_fatal_help "\`$dest' is not a directory"
                   1952:     fi
                   1953:     case $destdir in
                   1954:     [\\/]* | [A-Za-z]:[\\/]*) ;;
                   1955:     *)
                   1956:       for file in $files; do
                   1957:        case $file in
                   1958:        *.lo) ;;
                   1959:        *)
                   1960:          func_fatal_help "\`$destdir' must be an absolute directory name"
                   1961:          ;;
                   1962:        esac
                   1963:       done
                   1964:       ;;
                   1965:     esac
                   1966: 
                   1967:     # This variable tells wrapper scripts just to set variables rather
                   1968:     # than running their programs.
                   1969:     libtool_install_magic="$magic"
                   1970: 
                   1971:     staticlibs=
                   1972:     future_libdirs=
                   1973:     current_libdirs=
                   1974:     for file in $files; do
                   1975: 
                   1976:       # Do each installation.
                   1977:       case $file in
                   1978:       *.$libext)
                   1979:        # Do the static libraries later.
                   1980:        staticlibs="$staticlibs $file"
                   1981:        ;;
                   1982: 
                   1983:       *.la)
                   1984:        # Check to see that this really is a libtool archive.
                   1985:        func_lalib_unsafe_p "$file" \
                   1986:          || func_fatal_help "\`$file' is not a valid libtool archive"
                   1987: 
                   1988:        library_names=
                   1989:        old_library=
                   1990:        relink_command=
                   1991:        func_source "$file"
                   1992: 
                   1993:        # Add the libdir to current_libdirs if it is the destination.
                   1994:        if test "X$destdir" = "X$libdir"; then
                   1995:          case "$current_libdirs " in
                   1996:          *" $libdir "*) ;;
                   1997:          *) current_libdirs="$current_libdirs $libdir" ;;
                   1998:          esac
                   1999:        else
                   2000:          # Note the libdir as a future libdir.
                   2001:          case "$future_libdirs " in
                   2002:          *" $libdir "*) ;;
                   2003:          *) future_libdirs="$future_libdirs $libdir" ;;
                   2004:          esac
                   2005:        fi
                   2006: 
                   2007:        func_dirname "$file" "/" ""
                   2008:        dir="$func_dirname_result"
                   2009:        dir="$dir$objdir"
                   2010: 
                   2011:        if test -n "$relink_command"; then
                   2012:          # Determine the prefix the user has applied to our future dir.
                   2013:          inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
                   2014: 
                   2015:          # Don't allow the user to place us outside of our expected
                   2016:          # location b/c this prevents finding dependent libraries that
                   2017:          # are installed to the same prefix.
                   2018:          # At present, this check doesn't affect windows .dll's that
                   2019:          # are installed into $libdir/../bin (currently, that works fine)
                   2020:          # but it's something to keep an eye on.
                   2021:          test "$inst_prefix_dir" = "$destdir" && \
                   2022:            func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
                   2023: 
                   2024:          if test -n "$inst_prefix_dir"; then
                   2025:            # Stick the inst_prefix_dir data into the link command.
                   2026:            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
                   2027:          else
                   2028:            relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
                   2029:          fi
                   2030: 
                   2031:          func_warning "relinking \`$file'"
                   2032:          func_show_eval "$relink_command" \
                   2033:            'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
                   2034:        fi
                   2035: 
                   2036:        # See the names of the shared library.
                   2037:        set dummy $library_names; shift
                   2038:        if test -n "$1"; then
                   2039:          realname="$1"
                   2040:          shift
                   2041: 
                   2042:          srcname="$realname"
                   2043:          test -n "$relink_command" && srcname="$realname"T
                   2044: 
                   2045:          # Install the shared library and build the symlinks.
                   2046:          func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
                   2047:              'exit $?'
                   2048:          tstripme="$stripme"
                   2049:          case $host_os in
                   2050:          cygwin* | mingw* | pw32* | cegcc*)
                   2051:            case $realname in
                   2052:            *.dll.a)
                   2053:              tstripme=""
                   2054:              ;;
                   2055:            esac
                   2056:            ;;
                   2057:          esac
                   2058:          if test -n "$tstripme" && test -n "$striplib"; then
                   2059:            func_show_eval "$striplib $destdir/$realname" 'exit $?'
                   2060:          fi
                   2061: 
                   2062:          if test "$#" -gt 0; then
                   2063:            # Delete the old symlinks, and create new ones.
                   2064:            # Try `ln -sf' first, because the `ln' binary might depend on
                   2065:            # the symlink we replace!  Solaris /bin/ln does not understand -f,
                   2066:            # so we also need to try rm && ln -s.
                   2067:            for linkname
                   2068:            do
                   2069:              test "$linkname" != "$realname" \
                   2070:                && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
                   2071:            done
                   2072:          fi
                   2073: 
                   2074:          # Do each command in the postinstall commands.
                   2075:          lib="$destdir/$realname"
                   2076:          func_execute_cmds "$postinstall_cmds" 'exit $?'
                   2077:        fi
                   2078: 
                   2079:        # Install the pseudo-library for information purposes.
                   2080:        func_basename "$file"
                   2081:        name="$func_basename_result"
                   2082:        instname="$dir/$name"i
                   2083:        func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
                   2084: 
                   2085:        # Maybe install the static library, too.
                   2086:        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
                   2087:        ;;
                   2088: 
                   2089:       *.lo)
                   2090:        # Install (i.e. copy) a libtool object.
                   2091: 
                   2092:        # Figure out destination file name, if it wasn't already specified.
                   2093:        if test -n "$destname"; then
                   2094:          destfile="$destdir/$destname"
                   2095:        else
                   2096:          func_basename "$file"
                   2097:          destfile="$func_basename_result"
                   2098:          destfile="$destdir/$destfile"
                   2099:        fi
                   2100: 
                   2101:        # Deduce the name of the destination old-style object file.
                   2102:        case $destfile in
                   2103:        *.lo)
                   2104:          func_lo2o "$destfile"
                   2105:          staticdest=$func_lo2o_result
                   2106:          ;;
                   2107:        *.$objext)
                   2108:          staticdest="$destfile"
                   2109:          destfile=
                   2110:          ;;
                   2111:        *)
                   2112:          func_fatal_help "cannot copy a libtool object to \`$destfile'"
                   2113:          ;;
                   2114:        esac
                   2115: 
                   2116:        # Install the libtool object if requested.
                   2117:        test -n "$destfile" && \
                   2118:          func_show_eval "$install_prog $file $destfile" 'exit $?'
                   2119: 
                   2120:        # Install the old object if enabled.
                   2121:        if test "$build_old_libs" = yes; then
                   2122:          # Deduce the name of the old-style object file.
                   2123:          func_lo2o "$file"
                   2124:          staticobj=$func_lo2o_result
                   2125:          func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
                   2126:        fi
                   2127:        exit $EXIT_SUCCESS
                   2128:        ;;
                   2129: 
                   2130:       *)
                   2131:        # Figure out destination file name, if it wasn't already specified.
                   2132:        if test -n "$destname"; then
                   2133:          destfile="$destdir/$destname"
                   2134:        else
                   2135:          func_basename "$file"
                   2136:          destfile="$func_basename_result"
                   2137:          destfile="$destdir/$destfile"
                   2138:        fi
                   2139: 
                   2140:        # If the file is missing, and there is a .exe on the end, strip it
                   2141:        # because it is most likely a libtool script we actually want to
                   2142:        # install
                   2143:        stripped_ext=""
                   2144:        case $file in
                   2145:          *.exe)
                   2146:            if test ! -f "$file"; then
                   2147:              func_stripname '' '.exe' "$file"
                   2148:              file=$func_stripname_result
                   2149:              stripped_ext=".exe"
                   2150:            fi
                   2151:            ;;
                   2152:        esac
                   2153: 
                   2154:        # Do a test to see if this is really a libtool program.
                   2155:        case $host in
                   2156:        *cygwin* | *mingw*)
                   2157:            if func_ltwrapper_executable_p "$file"; then
                   2158:              func_ltwrapper_scriptname "$file"
                   2159:              wrapper=$func_ltwrapper_scriptname_result
                   2160:            else
                   2161:              func_stripname '' '.exe' "$file"
                   2162:              wrapper=$func_stripname_result
                   2163:            fi
                   2164:            ;;
                   2165:        *)
                   2166:            wrapper=$file
                   2167:            ;;
                   2168:        esac
                   2169:        if func_ltwrapper_script_p "$wrapper"; then
                   2170:          notinst_deplibs=
                   2171:          relink_command=
                   2172: 
                   2173:          func_source "$wrapper"
                   2174: 
                   2175:          # Check the variables that should have been set.
                   2176:          test -z "$generated_by_libtool_version" && \
                   2177:            func_fatal_error "invalid libtool wrapper script \`$wrapper'"
                   2178: 
                   2179:          finalize=yes
                   2180:          for lib in $notinst_deplibs; do
                   2181:            # Check to see that each library is installed.
                   2182:            libdir=
                   2183:            if test -f "$lib"; then
                   2184:              func_source "$lib"
                   2185:            fi
                   2186:            libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
                   2187:            if test -n "$libdir" && test ! -f "$libfile"; then
                   2188:              func_warning "\`$lib' has not been installed in \`$libdir'"
                   2189:              finalize=no
                   2190:            fi
                   2191:          done
                   2192: 
                   2193:          relink_command=
                   2194:          func_source "$wrapper"
                   2195: 
                   2196:          outputname=
                   2197:          if test "$fast_install" = no && test -n "$relink_command"; then
                   2198:            $opt_dry_run || {
                   2199:              if test "$finalize" = yes; then
                   2200:                tmpdir=`func_mktempdir`
                   2201:                func_basename "$file$stripped_ext"
                   2202:                file="$func_basename_result"
                   2203:                outputname="$tmpdir/$file"
                   2204:                # Replace the output file specification.
                   2205:                relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
                   2206: 
                   2207:                $opt_silent || {
                   2208:                  func_quote_for_expand "$relink_command"
                   2209:                  eval "func_echo $func_quote_for_expand_result"
                   2210:                }
                   2211:                if eval "$relink_command"; then :
                   2212:                  else
                   2213:                  func_error "error: relink \`$file' with the above command before installing it"
                   2214:                  $opt_dry_run || ${RM}r "$tmpdir"
                   2215:                  continue
                   2216:                fi
                   2217:                file="$outputname"
                   2218:              else
                   2219:                func_warning "cannot relink \`$file'"
                   2220:              fi
                   2221:            }
                   2222:          else
                   2223:            # Install the binary that we compiled earlier.
                   2224:            file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
                   2225:          fi
                   2226:        fi
                   2227: 
                   2228:        # remove .exe since cygwin /usr/bin/install will append another
                   2229:        # one anyway
                   2230:        case $install_prog,$host in
                   2231:        */usr/bin/install*,*cygwin*)
                   2232:          case $file:$destfile in
                   2233:          *.exe:*.exe)
                   2234:            # this is ok
                   2235:            ;;
                   2236:          *.exe:*)
                   2237:            destfile=$destfile.exe
                   2238:            ;;
                   2239:          *:*.exe)
                   2240:            func_stripname '' '.exe' "$destfile"
                   2241:            destfile=$func_stripname_result
                   2242:            ;;
                   2243:          esac
                   2244:          ;;
                   2245:        esac
                   2246:        func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
                   2247:        $opt_dry_run || if test -n "$outputname"; then
                   2248:          ${RM}r "$tmpdir"
                   2249:        fi
                   2250:        ;;
                   2251:       esac
                   2252:     done
                   2253: 
                   2254:     for file in $staticlibs; do
                   2255:       func_basename "$file"
                   2256:       name="$func_basename_result"
                   2257: 
                   2258:       # Set up the ranlib parameters.
                   2259:       oldlib="$destdir/$name"
                   2260: 
                   2261:       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
                   2262: 
                   2263:       if test -n "$stripme" && test -n "$old_striplib"; then
                   2264:        func_show_eval "$old_striplib $oldlib" 'exit $?'
                   2265:       fi
                   2266: 
                   2267:       # Do each command in the postinstall commands.
                   2268:       func_execute_cmds "$old_postinstall_cmds" 'exit $?'
                   2269:     done
                   2270: 
                   2271:     test -n "$future_libdirs" && \
                   2272:       func_warning "remember to run \`$progname --finish$future_libdirs'"
                   2273: 
                   2274:     if test -n "$current_libdirs"; then
                   2275:       # Maybe just do a dry run.
                   2276:       $opt_dry_run && current_libdirs=" -n$current_libdirs"
                   2277:       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
                   2278:     else
                   2279:       exit $EXIT_SUCCESS
                   2280:     fi
                   2281: }
                   2282: 
                   2283: test "$mode" = install && func_mode_install ${1+"$@"}
                   2284: 
                   2285: 
                   2286: # func_generate_dlsyms outputname originator pic_p
                   2287: # Extract symbols from dlprefiles and create ${outputname}S.o with
                   2288: # a dlpreopen symbol table.
                   2289: func_generate_dlsyms ()
                   2290: {
                   2291:     $opt_debug
                   2292:     my_outputname="$1"
                   2293:     my_originator="$2"
                   2294:     my_pic_p="${3-no}"
                   2295:     my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
                   2296:     my_dlsyms=
                   2297: 
                   2298:     if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
                   2299:       if test -n "$NM" && test -n "$global_symbol_pipe"; then
                   2300:        my_dlsyms="${my_outputname}S.c"
                   2301:       else
                   2302:        func_error "not configured to extract global symbols from dlpreopened files"
                   2303:       fi
                   2304:     fi
                   2305: 
                   2306:     if test -n "$my_dlsyms"; then
                   2307:       case $my_dlsyms in
                   2308:       "") ;;
                   2309:       *.c)
                   2310:        # Discover the nlist of each of the dlfiles.
                   2311:        nlist="$output_objdir/${my_outputname}.nm"
                   2312: 
                   2313:        func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
                   2314: 
                   2315:        # Parse the name list into a source file.
                   2316:        func_verbose "creating $output_objdir/$my_dlsyms"
                   2317: 
                   2318:        $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
                   2319: /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
                   2320: /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
                   2321: 
                   2322: #ifdef __cplusplus
                   2323: extern \"C\" {
                   2324: #endif
                   2325: 
                   2326: /* External symbol declarations for the compiler. */\
                   2327: "
                   2328: 
                   2329:        if test "$dlself" = yes; then
                   2330:          func_verbose "generating symbol list for \`$output'"
                   2331: 
                   2332:          $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
                   2333: 
                   2334:          # Add our own program objects to the symbol list.
                   2335:          progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
                   2336:          for progfile in $progfiles; do
                   2337:            func_verbose "extracting global C symbols from \`$progfile'"
                   2338:            $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
                   2339:          done
                   2340: 
                   2341:          if test -n "$exclude_expsyms"; then
                   2342:            $opt_dry_run || {
                   2343:              eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
                   2344:              eval '$MV "$nlist"T "$nlist"'
                   2345:            }
                   2346:          fi
                   2347: 
                   2348:          if test -n "$export_symbols_regex"; then
                   2349:            $opt_dry_run || {
                   2350:              eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
                   2351:              eval '$MV "$nlist"T "$nlist"'
                   2352:            }
                   2353:          fi
                   2354: 
                   2355:          # Prepare the list of exported symbols
                   2356:          if test -z "$export_symbols"; then
                   2357:            export_symbols="$output_objdir/$outputname.exp"
                   2358:            $opt_dry_run || {
                   2359:              $RM $export_symbols
                   2360:              eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
                   2361:              case $host in
                   2362:              *cygwin* | *mingw* | *cegcc* )
                   2363:                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                   2364:                 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
                   2365:                ;;
                   2366:              esac
                   2367:            }
                   2368:          else
                   2369:            $opt_dry_run || {
                   2370:              eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
                   2371:              eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
                   2372:              eval '$MV "$nlist"T "$nlist"'
                   2373:              case $host in
                   2374:                *cygwin | *mingw* | *cegcc* )
                   2375:                  eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                   2376:                  eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
                   2377:                  ;;
                   2378:              esac
                   2379:            }
                   2380:          fi
                   2381:        fi
                   2382: 
                   2383:        for dlprefile in $dlprefiles; do
                   2384:          func_verbose "extracting global C symbols from \`$dlprefile'"
                   2385:          func_basename "$dlprefile"
                   2386:          name="$func_basename_result"
                   2387:          $opt_dry_run || {
                   2388:            eval '$ECHO ": $name " >> "$nlist"'
                   2389:            eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
                   2390:          }
                   2391:        done
                   2392: 
                   2393:        $opt_dry_run || {
                   2394:          # Make sure we have at least an empty file.
                   2395:          test -f "$nlist" || : > "$nlist"
                   2396: 
                   2397:          if test -n "$exclude_expsyms"; then
                   2398:            $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
                   2399:            $MV "$nlist"T "$nlist"
                   2400:          fi
                   2401: 
                   2402:          # Try sorting and uniquifying the output.
                   2403:          if $GREP -v "^: " < "$nlist" |
                   2404:              if sort -k 3 </dev/null >/dev/null 2>&1; then
                   2405:                sort -k 3
                   2406:              else
                   2407:                sort +2
                   2408:              fi |
                   2409:              uniq > "$nlist"S; then
                   2410:            :
                   2411:          else
                   2412:            $GREP -v "^: " < "$nlist" > "$nlist"S
                   2413:          fi
                   2414: 
                   2415:          if test -f "$nlist"S; then
                   2416:            eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
                   2417:          else
                   2418:            $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
                   2419:          fi
                   2420: 
                   2421:          $ECHO >> "$output_objdir/$my_dlsyms" "\
                   2422: 
                   2423: /* The mapping between symbol names and symbols.  */
                   2424: typedef struct {
                   2425:   const char *name;
                   2426:   void *address;
                   2427: } lt_dlsymlist;
                   2428: "
                   2429:          case $host in
                   2430:          *cygwin* | *mingw* | *cegcc* )
                   2431:            $ECHO >> "$output_objdir/$my_dlsyms" "\
                   2432: /* DATA imports from DLLs on WIN32 con't be const, because
                   2433:    runtime relocations are performed -- see ld's documentation
                   2434:    on pseudo-relocs.  */"
                   2435:            lt_dlsym_const= ;;
                   2436:          *osf5*)
                   2437:            echo >> "$output_objdir/$my_dlsyms" "\
                   2438: /* This system does not cope well with relocations in const data */"
                   2439:            lt_dlsym_const= ;;
                   2440:          *)
                   2441:            lt_dlsym_const=const ;;
                   2442:          esac
                   2443: 
                   2444:          $ECHO >> "$output_objdir/$my_dlsyms" "\
                   2445: extern $lt_dlsym_const lt_dlsymlist
                   2446: lt_${my_prefix}_LTX_preloaded_symbols[];
                   2447: $lt_dlsym_const lt_dlsymlist
                   2448: lt_${my_prefix}_LTX_preloaded_symbols[] =
                   2449: {\
                   2450:   { \"$my_originator\", (void *) 0 },"
                   2451: 
                   2452:          case $need_lib_prefix in
                   2453:          no)
                   2454:            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
                   2455:            ;;
                   2456:          *)
                   2457:            eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
                   2458:            ;;
                   2459:          esac
                   2460:          $ECHO >> "$output_objdir/$my_dlsyms" "\
                   2461:   {0, (void *) 0}
                   2462: };
                   2463: 
                   2464: /* This works around a problem in FreeBSD linker */
                   2465: #ifdef FREEBSD_WORKAROUND
                   2466: static const void *lt_preloaded_setup() {
                   2467:   return lt_${my_prefix}_LTX_preloaded_symbols;
                   2468: }
                   2469: #endif
                   2470: 
                   2471: #ifdef __cplusplus
                   2472: }
                   2473: #endif\
                   2474: "
                   2475:        } # !$opt_dry_run
                   2476: 
                   2477:        pic_flag_for_symtable=
                   2478:        case "$compile_command " in
                   2479:        *" -static "*) ;;
                   2480:        *)
                   2481:          case $host in
                   2482:          # compiling the symbol table file with pic_flag works around
                   2483:          # a FreeBSD bug that causes programs to crash when -lm is
                   2484:          # linked before any other PIC object.  But we must not use
                   2485:          # pic_flag when linking with -static.  The problem exists in
                   2486:          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
                   2487:          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
                   2488:            pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
                   2489:          *-*-hpux*)
                   2490:            pic_flag_for_symtable=" $pic_flag"  ;;
                   2491:          *)
                   2492:            if test "X$my_pic_p" != Xno; then
                   2493:              pic_flag_for_symtable=" $pic_flag"
                   2494:            fi
                   2495:            ;;
                   2496:          esac
                   2497:          ;;
                   2498:        esac
                   2499:        symtab_cflags=
                   2500:        for arg in $LTCFLAGS; do
                   2501:          case $arg in
                   2502:          -pie | -fpie | -fPIE) ;;
                   2503:          *) symtab_cflags="$symtab_cflags $arg" ;;
                   2504:          esac
                   2505:        done
                   2506: 
                   2507:        # Now compile the dynamic symbol file.
                   2508:        func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
                   2509: 
                   2510:        # Clean up the generated files.
                   2511:        func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
                   2512: 
                   2513:        # Transform the symbol file into the correct name.
                   2514:        symfileobj="$output_objdir/${my_outputname}S.$objext"
                   2515:        case $host in
                   2516:        *cygwin* | *mingw* | *cegcc* )
                   2517:          if test -f "$output_objdir/$my_outputname.def"; then
                   2518:            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
                   2519:            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
                   2520:          else
                   2521:            compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
                   2522:            finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
                   2523:          fi
                   2524:          ;;
                   2525:        *)
                   2526:          compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
                   2527:          finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
                   2528:          ;;
                   2529:        esac
                   2530:        ;;
                   2531:       *)
                   2532:        func_fatal_error "unknown suffix for \`$my_dlsyms'"
                   2533:        ;;
                   2534:       esac
                   2535:     else
                   2536:       # We keep going just in case the user didn't refer to
                   2537:       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
                   2538:       # really was required.
                   2539: 
                   2540:       # Nullify the symbol file.
                   2541:       compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
                   2542:       finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
                   2543:     fi
                   2544: }
                   2545: 
                   2546: # func_win32_libid arg
                   2547: # return the library type of file 'arg'
                   2548: #
                   2549: # Need a lot of goo to handle *both* DLLs and import libs
                   2550: # Has to be a shell function in order to 'eat' the argument
                   2551: # that is supplied when $file_magic_command is called.
                   2552: func_win32_libid ()
                   2553: {
                   2554:   $opt_debug
                   2555:   win32_libid_type="unknown"
                   2556:   win32_fileres=`file -L $1 2>/dev/null`
                   2557:   case $win32_fileres in
                   2558:   *ar\ archive\ import\ library*) # definitely import
                   2559:     win32_libid_type="x86 archive import"
                   2560:     ;;
                   2561:   *ar\ archive*) # could be an import, or static
                   2562:     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
                   2563:        $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
                   2564:       win32_nmres=`eval $NM -f posix -A $1 |
                   2565:        $SED -n -e '
                   2566:            1,100{
                   2567:                / I /{
                   2568:                    s,.*,import,
                   2569:                    p
                   2570:                    q
                   2571:                }
                   2572:            }'`
                   2573:       case $win32_nmres in
                   2574:       import*)  win32_libid_type="x86 archive import";;
                   2575:       *)        win32_libid_type="x86 archive static";;
                   2576:       esac
                   2577:     fi
                   2578:     ;;
                   2579:   *DLL*)
                   2580:     win32_libid_type="x86 DLL"
                   2581:     ;;
                   2582:   *executable*) # but shell scripts are "executable" too...
                   2583:     case $win32_fileres in
                   2584:     *MS\ Windows\ PE\ Intel*)
                   2585:       win32_libid_type="x86 DLL"
                   2586:       ;;
                   2587:     esac
                   2588:     ;;
                   2589:   esac
                   2590:   $ECHO "$win32_libid_type"
                   2591: }
                   2592: 
                   2593: 
                   2594: 
                   2595: # func_extract_an_archive dir oldlib
                   2596: func_extract_an_archive ()
                   2597: {
                   2598:     $opt_debug
                   2599:     f_ex_an_ar_dir="$1"; shift
                   2600:     f_ex_an_ar_oldlib="$1"
                   2601:     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
                   2602:     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
                   2603:      :
                   2604:     else
                   2605:       func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
                   2606:     fi
                   2607: }
                   2608: 
                   2609: 
                   2610: # func_extract_archives gentop oldlib ...
                   2611: func_extract_archives ()
                   2612: {
                   2613:     $opt_debug
                   2614:     my_gentop="$1"; shift
                   2615:     my_oldlibs=${1+"$@"}
                   2616:     my_oldobjs=""
                   2617:     my_xlib=""
                   2618:     my_xabs=""
                   2619:     my_xdir=""
                   2620: 
                   2621:     for my_xlib in $my_oldlibs; do
                   2622:       # Extract the objects.
                   2623:       case $my_xlib in
                   2624:        [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
                   2625:        *) my_xabs=`pwd`"/$my_xlib" ;;
                   2626:       esac
                   2627:       func_basename "$my_xlib"
                   2628:       my_xlib="$func_basename_result"
                   2629:       my_xlib_u=$my_xlib
                   2630:       while :; do
                   2631:         case " $extracted_archives " in
                   2632:        *" $my_xlib_u "*)
                   2633:          func_arith $extracted_serial + 1
                   2634:          extracted_serial=$func_arith_result
                   2635:          my_xlib_u=lt$extracted_serial-$my_xlib ;;
                   2636:        *) break ;;
                   2637:        esac
                   2638:       done
                   2639:       extracted_archives="$extracted_archives $my_xlib_u"
                   2640:       my_xdir="$my_gentop/$my_xlib_u"
                   2641: 
                   2642:       func_mkdir_p "$my_xdir"
                   2643: 
                   2644:       case $host in
                   2645:       *-darwin*)
                   2646:        func_verbose "Extracting $my_xabs"
                   2647:        # Do not bother doing anything if just a dry run
                   2648:        $opt_dry_run || {
                   2649:          darwin_orig_dir=`pwd`
                   2650:          cd $my_xdir || exit $?
                   2651:          darwin_archive=$my_xabs
                   2652:          darwin_curdir=`pwd`
                   2653:          darwin_base_archive=`basename "$darwin_archive"`
                   2654:          darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
                   2655:          if test -n "$darwin_arches"; then
                   2656:            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
                   2657:            darwin_arch=
                   2658:            func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
                   2659:            for darwin_arch in  $darwin_arches ; do
                   2660:              func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
                   2661:              $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
                   2662:              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
                   2663:              func_extract_an_archive "`pwd`" "${darwin_base_archive}"
                   2664:              cd "$darwin_curdir"
                   2665:              $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
                   2666:            done # $darwin_arches
                   2667:             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
                   2668:            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
                   2669:            darwin_file=
                   2670:            darwin_files=
                   2671:            for darwin_file in $darwin_filelist; do
                   2672:              darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
                   2673:              $LIPO -create -output "$darwin_file" $darwin_files
                   2674:            done # $darwin_filelist
                   2675:            $RM -rf unfat-$$
                   2676:            cd "$darwin_orig_dir"
                   2677:          else
                   2678:            cd $darwin_orig_dir
                   2679:            func_extract_an_archive "$my_xdir" "$my_xabs"
                   2680:          fi # $darwin_arches
                   2681:        } # !$opt_dry_run
                   2682:        ;;
                   2683:       *)
                   2684:         func_extract_an_archive "$my_xdir" "$my_xabs"
                   2685:        ;;
                   2686:       esac
                   2687:       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
                   2688:     done
                   2689: 
                   2690:     func_extract_archives_result="$my_oldobjs"
                   2691: }
                   2692: 
                   2693: 
                   2694: 
                   2695: # func_emit_wrapper_part1 [arg=no]
                   2696: #
                   2697: # Emit the first part of a libtool wrapper script on stdout.
                   2698: # For more information, see the description associated with
                   2699: # func_emit_wrapper(), below.
                   2700: func_emit_wrapper_part1 ()
                   2701: {
                   2702:        func_emit_wrapper_part1_arg1=no
                   2703:        if test -n "$1" ; then
                   2704:          func_emit_wrapper_part1_arg1=$1
                   2705:        fi
                   2706: 
                   2707:        $ECHO "\
                   2708: #! $SHELL
                   2709: 
                   2710: # $output - temporary wrapper script for $objdir/$outputname
                   2711: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
                   2712: #
                   2713: # The $output program cannot be directly executed until all the libtool
                   2714: # libraries that it depends on are installed.
                   2715: #
                   2716: # This wrapper script should never be moved out of the build directory.
                   2717: # If it is, it will not operate correctly.
                   2718: 
                   2719: # Sed substitution that helps us do robust quoting.  It backslashifies
                   2720: # metacharacters that are still active within double-quoted strings.
                   2721: Xsed='${SED} -e 1s/^X//'
                   2722: sed_quote_subst='$sed_quote_subst'
                   2723: 
                   2724: # Be Bourne compatible
                   2725: if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
                   2726:   emulate sh
                   2727:   NULLCMD=:
                   2728:   # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
                   2729:   # is contrary to our usage.  Disable this feature.
                   2730:   alias -g '\${1+\"\$@\"}'='\"\$@\"'
                   2731:   setopt NO_GLOB_SUBST
                   2732: else
                   2733:   case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
                   2734: fi
                   2735: BIN_SH=xpg4; export BIN_SH # for Tru64
                   2736: DUALCASE=1; export DUALCASE # for MKS sh
                   2737: 
                   2738: # The HP-UX ksh and POSIX shell print the target directory to stdout
                   2739: # if CDPATH is set.
                   2740: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
                   2741: 
                   2742: relink_command=\"$relink_command\"
                   2743: 
                   2744: # This environment variable determines our operation mode.
                   2745: if test \"\$libtool_install_magic\" = \"$magic\"; then
                   2746:   # install mode needs the following variables:
                   2747:   generated_by_libtool_version='$macro_version'
                   2748:   notinst_deplibs='$notinst_deplibs'
                   2749: else
                   2750:   # When we are sourced in execute mode, \$file and \$ECHO are already set.
                   2751:   if test \"\$libtool_execute_magic\" != \"$magic\"; then
                   2752:     ECHO=\"$qecho\"
                   2753:     file=\"\$0\"
                   2754:     # Make sure echo works.
                   2755:     if test \"X\$1\" = X--no-reexec; then
                   2756:       # Discard the --no-reexec flag, and continue.
                   2757:       shift
                   2758:     elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
                   2759:       # Yippee, \$ECHO works!
                   2760:       :
                   2761:     else
                   2762:       # Restart under the correct shell, and then maybe \$ECHO will work.
                   2763:       exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
                   2764:     fi
                   2765:   fi\
                   2766: "
                   2767:        $ECHO "\
                   2768: 
                   2769:   # Find the directory that this script lives in.
                   2770:   thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
                   2771:   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
                   2772: 
                   2773:   # Follow symbolic links until we get to the real thisdir.
                   2774:   file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
                   2775:   while test -n \"\$file\"; do
                   2776:     destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
                   2777: 
                   2778:     # If there was a directory component, then change thisdir.
                   2779:     if test \"x\$destdir\" != \"x\$file\"; then
                   2780:       case \"\$destdir\" in
                   2781:       [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
                   2782:       *) thisdir=\"\$thisdir/\$destdir\" ;;
                   2783:       esac
                   2784:     fi
                   2785: 
                   2786:     file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
                   2787:     file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
                   2788:   done
                   2789: "
                   2790: }
                   2791: # end: func_emit_wrapper_part1
                   2792: 
                   2793: # func_emit_wrapper_part2 [arg=no]
                   2794: #
                   2795: # Emit the second part of a libtool wrapper script on stdout.
                   2796: # For more information, see the description associated with
                   2797: # func_emit_wrapper(), below.
                   2798: func_emit_wrapper_part2 ()
                   2799: {
                   2800:        func_emit_wrapper_part2_arg1=no
                   2801:        if test -n "$1" ; then
                   2802:          func_emit_wrapper_part2_arg1=$1
                   2803:        fi
                   2804: 
                   2805:        $ECHO "\
                   2806: 
                   2807:   # Usually 'no', except on cygwin/mingw when embedded into
                   2808:   # the cwrapper.
                   2809:   WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
                   2810:   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
                   2811:     # special case for '.'
                   2812:     if test \"\$thisdir\" = \".\"; then
                   2813:       thisdir=\`pwd\`
                   2814:     fi
                   2815:     # remove .libs from thisdir
                   2816:     case \"\$thisdir\" in
                   2817:     *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
                   2818:     $objdir )   thisdir=. ;;
                   2819:     esac
                   2820:   fi
                   2821: 
                   2822:   # Try to get the absolute directory name.
                   2823:   absdir=\`cd \"\$thisdir\" && pwd\`
                   2824:   test -n \"\$absdir\" && thisdir=\"\$absdir\"
                   2825: "
                   2826: 
                   2827:        if test "$fast_install" = yes; then
                   2828:          $ECHO "\
                   2829:   program=lt-'$outputname'$exeext
                   2830:   progdir=\"\$thisdir/$objdir\"
                   2831: 
                   2832:   if test ! -f \"\$progdir/\$program\" ||
                   2833:      { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
                   2834:        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
                   2835: 
                   2836:     file=\"\$\$-\$program\"
                   2837: 
                   2838:     if test ! -d \"\$progdir\"; then
                   2839:       $MKDIR \"\$progdir\"
                   2840:     else
                   2841:       $RM \"\$progdir/\$file\"
                   2842:     fi"
                   2843: 
                   2844:          $ECHO "\
                   2845: 
                   2846:     # relink executable if necessary
                   2847:     if test -n \"\$relink_command\"; then
                   2848:       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
                   2849:       else
                   2850:        $ECHO \"\$relink_command_output\" >&2
                   2851:        $RM \"\$progdir/\$file\"
                   2852:        exit 1
                   2853:       fi
                   2854:     fi
                   2855: 
                   2856:     $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
                   2857:     { $RM \"\$progdir/\$program\";
                   2858:       $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
                   2859:     $RM \"\$progdir/\$file\"
                   2860:   fi"
                   2861:        else
                   2862:          $ECHO "\
                   2863:   program='$outputname'
                   2864:   progdir=\"\$thisdir/$objdir\"
                   2865: "
                   2866:        fi
                   2867: 
                   2868:        $ECHO "\
                   2869: 
                   2870:   if test -f \"\$progdir/\$program\"; then"
                   2871: 
                   2872:        # Export our shlibpath_var if we have one.
                   2873:        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
                   2874:          $ECHO "\
                   2875:     # Add our own library path to $shlibpath_var
                   2876:     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
                   2877: 
                   2878:     # Some systems cannot cope with colon-terminated $shlibpath_var
                   2879:     # The second colon is a workaround for a bug in BeOS R4 sed
                   2880:     $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
                   2881: 
                   2882:     export $shlibpath_var
                   2883: "
                   2884:        fi
                   2885: 
                   2886:        # fixup the dll searchpath if we need to.
                   2887:        if test -n "$dllsearchpath"; then
                   2888:          $ECHO "\
                   2889:     # Add the dll search path components to the executable PATH
                   2890:     PATH=$dllsearchpath:\$PATH
                   2891: "
                   2892:        fi
                   2893: 
                   2894:        $ECHO "\
                   2895:     if test \"\$libtool_execute_magic\" != \"$magic\"; then
                   2896:       # Run the actual program with our arguments.
                   2897: "
                   2898:        case $host in
                   2899:        # Backslashes separate directories on plain windows
                   2900:        *-*-mingw | *-*-os2* | *-cegcc*)
                   2901:          $ECHO "\
                   2902:       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
                   2903: "
                   2904:          ;;
                   2905: 
                   2906:        *)
                   2907:          $ECHO "\
                   2908:       exec \"\$progdir/\$program\" \${1+\"\$@\"}
                   2909: "
                   2910:          ;;
                   2911:        esac
                   2912:        $ECHO "\
                   2913:       \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
                   2914:       exit 1
                   2915:     fi
                   2916:   else
                   2917:     # The program doesn't exist.
                   2918:     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
                   2919:     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
                   2920:     $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
                   2921:     exit 1
                   2922:   fi
                   2923: fi\
                   2924: "
                   2925: }
                   2926: # end: func_emit_wrapper_part2
                   2927: 
                   2928: 
                   2929: # func_emit_wrapper [arg=no]
                   2930: #
                   2931: # Emit a libtool wrapper script on stdout.
                   2932: # Don't directly open a file because we may want to
                   2933: # incorporate the script contents within a cygwin/mingw
                   2934: # wrapper executable.  Must ONLY be called from within
                   2935: # func_mode_link because it depends on a number of variables
                   2936: # set therein.
                   2937: #
                   2938: # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
                   2939: # variable will take.  If 'yes', then the emitted script
                   2940: # will assume that the directory in which it is stored is
                   2941: # the $objdir directory.  This is a cygwin/mingw-specific
                   2942: # behavior.
                   2943: func_emit_wrapper ()
                   2944: {
                   2945:        func_emit_wrapper_arg1=no
                   2946:        if test -n "$1" ; then
                   2947:          func_emit_wrapper_arg1=$1
                   2948:        fi
                   2949: 
                   2950:        # split this up so that func_emit_cwrapperexe_src
                   2951:        # can call each part independently.
                   2952:        func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
                   2953:        func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
                   2954: }
                   2955: 
                   2956: 
                   2957: # func_to_host_path arg
                   2958: #
                   2959: # Convert paths to host format when used with build tools.
                   2960: # Intended for use with "native" mingw (where libtool itself
                   2961: # is running under the msys shell), or in the following cross-
                   2962: # build environments:
                   2963: #    $build          $host
                   2964: #    mingw (msys)    mingw  [e.g. native]
                   2965: #    cygwin          mingw
                   2966: #    *nix + wine     mingw
                   2967: # where wine is equipped with the `winepath' executable.
                   2968: # In the native mingw case, the (msys) shell automatically
                   2969: # converts paths for any non-msys applications it launches,
                   2970: # but that facility isn't available from inside the cwrapper.
                   2971: # Similar accommodations are necessary for $host mingw and
                   2972: # $build cygwin.  Calling this function does no harm for other
                   2973: # $host/$build combinations not listed above.
                   2974: #
                   2975: # ARG is the path (on $build) that should be converted to
                   2976: # the proper representation for $host. The result is stored
                   2977: # in $func_to_host_path_result.
                   2978: func_to_host_path ()
                   2979: {
                   2980:   func_to_host_path_result="$1"
                   2981:   if test -n "$1" ; then
                   2982:     case $host in
                   2983:       *mingw* )
                   2984:         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
                   2985:         case $build in
                   2986:           *mingw* ) # actually, msys
                   2987:             # awkward: cmd appends spaces to result
                   2988:             lt_sed_strip_trailing_spaces="s/[ ]*\$//"
                   2989:             func_to_host_path_tmp1=`( cmd //c echo "$1" |\
                   2990:               $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
                   2991:             func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
                   2992:               $SED -e "$lt_sed_naive_backslashify"`
                   2993:             ;;
                   2994:           *cygwin* )
                   2995:             func_to_host_path_tmp1=`cygpath -w "$1"`
                   2996:             func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
                   2997:               $SED -e "$lt_sed_naive_backslashify"`
                   2998:             ;;
                   2999:           * )
                   3000:             # Unfortunately, winepath does not exit with a non-zero
                   3001:             # error code, so we are forced to check the contents of
                   3002:             # stdout. On the other hand, if the command is not
                   3003:             # found, the shell will set an exit code of 127 and print
                   3004:             # *an error message* to stdout. So we must check for both
                   3005:             # error code of zero AND non-empty stdout, which explains
                   3006:             # the odd construction:
                   3007:             func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
                   3008:             if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
                   3009:               func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
                   3010:                 $SED -e "$lt_sed_naive_backslashify"`
                   3011:             else
                   3012:               # Allow warning below.
                   3013:               func_to_host_path_result=""
                   3014:             fi
                   3015:             ;;
                   3016:         esac
                   3017:         if test -z "$func_to_host_path_result" ; then
                   3018:           func_error "Could not determine host path corresponding to"
                   3019:           func_error "  '$1'"
                   3020:           func_error "Continuing, but uninstalled executables may not work."
                   3021:           # Fallback:
                   3022:           func_to_host_path_result="$1"
                   3023:         fi
                   3024:         ;;
                   3025:     esac
                   3026:   fi
                   3027: }
                   3028: # end: func_to_host_path
                   3029: 
                   3030: # func_to_host_pathlist arg
                   3031: #
                   3032: # Convert pathlists to host format when used with build tools.
                   3033: # See func_to_host_path(), above. This function supports the
                   3034: # following $build/$host combinations (but does no harm for
                   3035: # combinations not listed here):
                   3036: #    $build          $host
                   3037: #    mingw (msys)    mingw  [e.g. native]
                   3038: #    cygwin          mingw
                   3039: #    *nix + wine     mingw
                   3040: #
                   3041: # Path separators are also converted from $build format to
                   3042: # $host format. If ARG begins or ends with a path separator
                   3043: # character, it is preserved (but converted to $host format)
                   3044: # on output.
                   3045: #
                   3046: # ARG is a pathlist (on $build) that should be converted to
                   3047: # the proper representation on $host. The result is stored
                   3048: # in $func_to_host_pathlist_result.
                   3049: func_to_host_pathlist ()
                   3050: {
                   3051:   func_to_host_pathlist_result="$1"
                   3052:   if test -n "$1" ; then
                   3053:     case $host in
                   3054:       *mingw* )
                   3055:         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
                   3056:         # Remove leading and trailing path separator characters from
                   3057:         # ARG. msys behavior is inconsistent here, cygpath turns them
                   3058:         # into '.;' and ';.', and winepath ignores them completely.
                   3059:         func_to_host_pathlist_tmp2="$1"
                   3060:         # Once set for this call, this variable should not be
                   3061:         # reassigned. It is used in tha fallback case.
                   3062:         func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
                   3063:           $SED -e 's|^:*||' -e 's|:*$||'`
                   3064:         case $build in
                   3065:           *mingw* ) # Actually, msys.
                   3066:             # Awkward: cmd appends spaces to result.
                   3067:             lt_sed_strip_trailing_spaces="s/[ ]*\$//"
                   3068:             func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
                   3069:               $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
                   3070:             func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
                   3071:               $SED -e "$lt_sed_naive_backslashify"`
                   3072:             ;;
                   3073:           *cygwin* )
                   3074:             func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
                   3075:             func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
                   3076:               $SED -e "$lt_sed_naive_backslashify"`
                   3077:             ;;
                   3078:           * )
                   3079:             # unfortunately, winepath doesn't convert pathlists
                   3080:             func_to_host_pathlist_result=""
                   3081:             func_to_host_pathlist_oldIFS=$IFS
                   3082:             IFS=:
                   3083:             for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
                   3084:               IFS=$func_to_host_pathlist_oldIFS
                   3085:               if test -n "$func_to_host_pathlist_f" ; then
                   3086:                 func_to_host_path "$func_to_host_pathlist_f"
                   3087:                 if test -n "$func_to_host_path_result" ; then
                   3088:                   if test -z "$func_to_host_pathlist_result" ; then
                   3089:                     func_to_host_pathlist_result="$func_to_host_path_result"
                   3090:                   else
                   3091:                     func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
                   3092:                   fi
                   3093:                 fi
                   3094:               fi
                   3095:               IFS=:
                   3096:             done
                   3097:             IFS=$func_to_host_pathlist_oldIFS
                   3098:             ;;
                   3099:         esac
                   3100:         if test -z "$func_to_host_pathlist_result" ; then
                   3101:           func_error "Could not determine the host path(s) corresponding to"
                   3102:           func_error "  '$1'"
                   3103:           func_error "Continuing, but uninstalled executables may not work."
                   3104:           # Fallback. This may break if $1 contains DOS-style drive
                   3105:           # specifications. The fix is not to complicate the expression
                   3106:           # below, but for the user to provide a working wine installation
                   3107:           # with winepath so that path translation in the cross-to-mingw
                   3108:           # case works properly.
                   3109:           lt_replace_pathsep_nix_to_dos="s|:|;|g"
                   3110:           func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
                   3111:             $SED -e "$lt_replace_pathsep_nix_to_dos"`
                   3112:         fi
                   3113:         # Now, add the leading and trailing path separators back
                   3114:         case "$1" in
                   3115:           :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
                   3116:             ;;
                   3117:         esac
                   3118:         case "$1" in
                   3119:           *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
                   3120:             ;;
                   3121:         esac
                   3122:         ;;
                   3123:     esac
                   3124:   fi
                   3125: }
                   3126: # end: func_to_host_pathlist
                   3127: 
                   3128: # func_emit_cwrapperexe_src
                   3129: # emit the source code for a wrapper executable on stdout
                   3130: # Must ONLY be called from within func_mode_link because
                   3131: # it depends on a number of variable set therein.
                   3132: func_emit_cwrapperexe_src ()
                   3133: {
                   3134:        cat <<EOF
                   3135: 
                   3136: /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
                   3137:    Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
                   3138: 
                   3139:    The $output program cannot be directly executed until all the libtool
                   3140:    libraries that it depends on are installed.
                   3141: 
                   3142:    This wrapper executable should never be moved out of the build directory.
                   3143:    If it is, it will not operate correctly.
                   3144: 
                   3145:    Currently, it simply execs the wrapper *script* "$SHELL $output",
                   3146:    but could eventually absorb all of the scripts functionality and
                   3147:    exec $objdir/$outputname directly.
                   3148: */
                   3149: EOF
                   3150:            cat <<"EOF"
                   3151: #include <stdio.h>
                   3152: #include <stdlib.h>
                   3153: #ifdef _MSC_VER
                   3154: # include <direct.h>
                   3155: # include <process.h>
                   3156: # include <io.h>
                   3157: # define setmode _setmode
                   3158: #else
                   3159: # include <unistd.h>
                   3160: # include <stdint.h>
                   3161: # ifdef __CYGWIN__
                   3162: #  include <io.h>
                   3163: #  define HAVE_SETENV
                   3164: #  ifdef __STRICT_ANSI__
                   3165: char *realpath (const char *, char *);
                   3166: int putenv (char *);
                   3167: int setenv (const char *, const char *, int);
                   3168: #  endif
                   3169: # endif
                   3170: #endif
                   3171: #include <malloc.h>
                   3172: #include <stdarg.h>
                   3173: #include <assert.h>
                   3174: #include <string.h>
                   3175: #include <ctype.h>
                   3176: #include <errno.h>
                   3177: #include <fcntl.h>
                   3178: #include <sys/stat.h>
                   3179: 
                   3180: #if defined(PATH_MAX)
                   3181: # define LT_PATHMAX PATH_MAX
                   3182: #elif defined(MAXPATHLEN)
                   3183: # define LT_PATHMAX MAXPATHLEN
                   3184: #else
                   3185: # define LT_PATHMAX 1024
                   3186: #endif
                   3187: 
                   3188: #ifndef S_IXOTH
                   3189: # define S_IXOTH 0
                   3190: #endif
                   3191: #ifndef S_IXGRP
                   3192: # define S_IXGRP 0
                   3193: #endif
                   3194: 
                   3195: #ifdef _MSC_VER
                   3196: # define S_IXUSR _S_IEXEC
                   3197: # define stat _stat
                   3198: # ifndef _INTPTR_T_DEFINED
                   3199: #  define intptr_t int
                   3200: # endif
                   3201: #endif
                   3202: 
                   3203: #ifndef DIR_SEPARATOR
                   3204: # define DIR_SEPARATOR '/'
                   3205: # define PATH_SEPARATOR ':'
                   3206: #endif
                   3207: 
                   3208: #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
                   3209:   defined (__OS2__)
                   3210: # define HAVE_DOS_BASED_FILE_SYSTEM
                   3211: # define FOPEN_WB "wb"
                   3212: # ifndef DIR_SEPARATOR_2
                   3213: #  define DIR_SEPARATOR_2 '\\'
                   3214: # endif
                   3215: # ifndef PATH_SEPARATOR_2
                   3216: #  define PATH_SEPARATOR_2 ';'
                   3217: # endif
                   3218: #endif
                   3219: 
                   3220: #ifndef DIR_SEPARATOR_2
                   3221: # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
                   3222: #else /* DIR_SEPARATOR_2 */
                   3223: # define IS_DIR_SEPARATOR(ch) \
                   3224:        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
                   3225: #endif /* DIR_SEPARATOR_2 */
                   3226: 
                   3227: #ifndef PATH_SEPARATOR_2
                   3228: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
                   3229: #else /* PATH_SEPARATOR_2 */
                   3230: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
                   3231: #endif /* PATH_SEPARATOR_2 */
                   3232: 
                   3233: #ifdef __CYGWIN__
                   3234: # define FOPEN_WB "wb"
                   3235: #endif
                   3236: 
                   3237: #ifndef FOPEN_WB
                   3238: # define FOPEN_WB "w"
                   3239: #endif
                   3240: #ifndef _O_BINARY
                   3241: # define _O_BINARY 0
                   3242: #endif
                   3243: 
                   3244: #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
                   3245: #define XFREE(stale) do { \
                   3246:   if (stale) { free ((void *) stale); stale = 0; } \
                   3247: } while (0)
                   3248: 
                   3249: #undef LTWRAPPER_DEBUGPRINTF
                   3250: #if defined DEBUGWRAPPER
                   3251: # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
                   3252: static void
                   3253: ltwrapper_debugprintf (const char *fmt, ...)
                   3254: {
                   3255:     va_list args;
                   3256:     va_start (args, fmt);
                   3257:     (void) vfprintf (stderr, fmt, args);
                   3258:     va_end (args);
                   3259: }
                   3260: #else
                   3261: # define LTWRAPPER_DEBUGPRINTF(args)
                   3262: #endif
                   3263: 
                   3264: const char *program_name = NULL;
                   3265: 
                   3266: void *xmalloc (size_t num);
                   3267: char *xstrdup (const char *string);
                   3268: const char *base_name (const char *name);
                   3269: char *find_executable (const char *wrapper);
                   3270: char *chase_symlinks (const char *pathspec);
                   3271: int make_executable (const char *path);
                   3272: int check_executable (const char *path);
                   3273: char *strendzap (char *str, const char *pat);
                   3274: void lt_fatal (const char *message, ...);
                   3275: void lt_setenv (const char *name, const char *value);
                   3276: char *lt_extend_str (const char *orig_value, const char *add, int to_end);
                   3277: void lt_opt_process_env_set (const char *arg);
                   3278: void lt_opt_process_env_prepend (const char *arg);
                   3279: void lt_opt_process_env_append (const char *arg);
                   3280: int lt_split_name_value (const char *arg, char** name, char** value);
                   3281: void lt_update_exe_path (const char *name, const char *value);
                   3282: void lt_update_lib_path (const char *name, const char *value);
                   3283: 
                   3284: static const char *script_text_part1 =
                   3285: EOF
                   3286: 
                   3287:            func_emit_wrapper_part1 yes |
                   3288:                $SED -e 's/\([\\"]\)/\\\1/g' \
                   3289:                     -e 's/^/  "/' -e 's/$/\\n"/'
                   3290:            echo ";"
                   3291:            cat <<EOF
                   3292: 
                   3293: static const char *script_text_part2 =
                   3294: EOF
                   3295:            func_emit_wrapper_part2 yes |
                   3296:                $SED -e 's/\([\\"]\)/\\\1/g' \
                   3297:                     -e 's/^/  "/' -e 's/$/\\n"/'
                   3298:            echo ";"
                   3299: 
                   3300:            cat <<EOF
                   3301: const char * MAGIC_EXE = "$magic_exe";
                   3302: const char * LIB_PATH_VARNAME = "$shlibpath_var";
                   3303: EOF
                   3304: 
                   3305:            if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
                   3306:               func_to_host_pathlist "$temp_rpath"
                   3307:              cat <<EOF
                   3308: const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
                   3309: EOF
                   3310:            else
                   3311:              cat <<"EOF"
                   3312: const char * LIB_PATH_VALUE   = "";
                   3313: EOF
                   3314:            fi
                   3315: 
                   3316:            if test -n "$dllsearchpath"; then
                   3317:               func_to_host_pathlist "$dllsearchpath:"
                   3318:              cat <<EOF
                   3319: const char * EXE_PATH_VARNAME = "PATH";
                   3320: const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
                   3321: EOF
                   3322:            else
                   3323:              cat <<"EOF"
                   3324: const char * EXE_PATH_VARNAME = "";
                   3325: const char * EXE_PATH_VALUE   = "";
                   3326: EOF
                   3327:            fi
                   3328: 
                   3329:            if test "$fast_install" = yes; then
                   3330:              cat <<EOF
                   3331: const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
                   3332: EOF
                   3333:            else
                   3334:              cat <<EOF
                   3335: const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
                   3336: EOF
                   3337:            fi
                   3338: 
                   3339: 
                   3340:            cat <<"EOF"
                   3341: 
                   3342: #define LTWRAPPER_OPTION_PREFIX         "--lt-"
                   3343: #define LTWRAPPER_OPTION_PREFIX_LENGTH  5
                   3344: 
                   3345: static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
                   3346: static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
                   3347: 
                   3348: static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
                   3349: 
                   3350: static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
                   3351: static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
                   3352:   /* argument is putenv-style "foo=bar", value of foo is set to bar */
                   3353: 
                   3354: static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
                   3355: static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
                   3356:   /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
                   3357: 
                   3358: static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
                   3359: static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
                   3360:   /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
                   3361: 
                   3362: int
                   3363: main (int argc, char *argv[])
                   3364: {
                   3365:   char **newargz;
                   3366:   int  newargc;
                   3367:   char *tmp_pathspec;
                   3368:   char *actual_cwrapper_path;
                   3369:   char *actual_cwrapper_name;
                   3370:   char *target_name;
                   3371:   char *lt_argv_zero;
                   3372:   intptr_t rval = 127;
                   3373: 
                   3374:   int i;
                   3375: 
                   3376:   program_name = (char *) xstrdup (base_name (argv[0]));
                   3377:   LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
                   3378:   LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
                   3379: 
                   3380:   /* very simple arg parsing; don't want to rely on getopt */
                   3381:   for (i = 1; i < argc; i++)
                   3382:     {
                   3383:       if (strcmp (argv[i], dumpscript_opt) == 0)
                   3384:        {
                   3385: EOF
                   3386:            case "$host" in
                   3387:              *mingw* | *cygwin* )
                   3388:                # make stdout use "unix" line endings
                   3389:                echo "          setmode(1,_O_BINARY);"
                   3390:                ;;
                   3391:              esac
                   3392: 
                   3393:            cat <<"EOF"
                   3394:          printf ("%s", script_text_part1);
                   3395:          printf ("%s", script_text_part2);
                   3396:          return 0;
                   3397:        }
                   3398:     }
                   3399: 
                   3400:   newargz = XMALLOC (char *, argc + 1);
                   3401:   tmp_pathspec = find_executable (argv[0]);
                   3402:   if (tmp_pathspec == NULL)
                   3403:     lt_fatal ("Couldn't find %s", argv[0]);
                   3404:   LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
                   3405:                          tmp_pathspec));
                   3406: 
                   3407:   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
                   3408:   LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
                   3409:                          actual_cwrapper_path));
                   3410:   XFREE (tmp_pathspec);
                   3411: 
                   3412:   actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
                   3413:   strendzap (actual_cwrapper_path, actual_cwrapper_name);
                   3414: 
                   3415:   /* wrapper name transforms */
                   3416:   strendzap (actual_cwrapper_name, ".exe");
                   3417:   tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
                   3418:   XFREE (actual_cwrapper_name);
                   3419:   actual_cwrapper_name = tmp_pathspec;
                   3420:   tmp_pathspec = 0;
                   3421: 
                   3422:   /* target_name transforms -- use actual target program name; might have lt- prefix */
                   3423:   target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
                   3424:   strendzap (target_name, ".exe");
                   3425:   tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
                   3426:   XFREE (target_name);
                   3427:   target_name = tmp_pathspec;
                   3428:   tmp_pathspec = 0;
                   3429: 
                   3430:   LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
                   3431:                          target_name));
                   3432: EOF
                   3433: 
                   3434:            cat <<EOF
                   3435:   newargz[0] =
                   3436:     XMALLOC (char, (strlen (actual_cwrapper_path) +
                   3437:                    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
                   3438:   strcpy (newargz[0], actual_cwrapper_path);
                   3439:   strcat (newargz[0], "$objdir");
                   3440:   strcat (newargz[0], "/");
                   3441: EOF
                   3442: 
                   3443:            cat <<"EOF"
                   3444:   /* stop here, and copy so we don't have to do this twice */
                   3445:   tmp_pathspec = xstrdup (newargz[0]);
                   3446: 
                   3447:   /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
                   3448:   strcat (newargz[0], actual_cwrapper_name);
                   3449: 
                   3450:   /* DO want the lt- prefix here if it exists, so use target_name */
                   3451:   lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
                   3452:   XFREE (tmp_pathspec);
                   3453:   tmp_pathspec = NULL;
                   3454: EOF
                   3455: 
                   3456:            case $host_os in
                   3457:              mingw*)
                   3458:            cat <<"EOF"
                   3459:   {
                   3460:     char* p;
                   3461:     while ((p = strchr (newargz[0], '\\')) != NULL)
                   3462:       {
                   3463:        *p = '/';
                   3464:       }
                   3465:     while ((p = strchr (lt_argv_zero, '\\')) != NULL)
                   3466:       {
                   3467:        *p = '/';
                   3468:       }
                   3469:   }
                   3470: EOF
                   3471:            ;;
                   3472:            esac
                   3473: 
                   3474:            cat <<"EOF"
                   3475:   XFREE (target_name);
                   3476:   XFREE (actual_cwrapper_path);
                   3477:   XFREE (actual_cwrapper_name);
                   3478: 
                   3479:   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
                   3480:   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
                   3481:   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
                   3482:   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
                   3483: 
                   3484:   newargc=0;
                   3485:   for (i = 1; i < argc; i++)
                   3486:     {
                   3487:       if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
                   3488:         {
                   3489:           if (argv[i][env_set_opt_len] == '=')
                   3490:             {
                   3491:               const char *p = argv[i] + env_set_opt_len + 1;
                   3492:               lt_opt_process_env_set (p);
                   3493:             }
                   3494:           else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
                   3495:             {
                   3496:               lt_opt_process_env_set (argv[++i]); /* don't copy */
                   3497:             }
                   3498:           else
                   3499:             lt_fatal ("%s missing required argument", env_set_opt);
                   3500:           continue;
                   3501:         }
                   3502:       if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
                   3503:         {
                   3504:           if (argv[i][env_prepend_opt_len] == '=')
                   3505:             {
                   3506:               const char *p = argv[i] + env_prepend_opt_len + 1;
                   3507:               lt_opt_process_env_prepend (p);
                   3508:             }
                   3509:           else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
                   3510:             {
                   3511:               lt_opt_process_env_prepend (argv[++i]); /* don't copy */
                   3512:             }
                   3513:           else
                   3514:             lt_fatal ("%s missing required argument", env_prepend_opt);
                   3515:           continue;
                   3516:         }
                   3517:       if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
                   3518:         {
                   3519:           if (argv[i][env_append_opt_len] == '=')
                   3520:             {
                   3521:               const char *p = argv[i] + env_append_opt_len + 1;
                   3522:               lt_opt_process_env_append (p);
                   3523:             }
                   3524:           else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
                   3525:             {
                   3526:               lt_opt_process_env_append (argv[++i]); /* don't copy */
                   3527:             }
                   3528:           else
                   3529:             lt_fatal ("%s missing required argument", env_append_opt);
                   3530:           continue;
                   3531:         }
                   3532:       if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
                   3533:         {
                   3534:           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
                   3535:              namespace, but it is not one of the ones we know about and
                   3536:              have already dealt with, above (inluding dump-script), then
                   3537:              report an error. Otherwise, targets might begin to believe
                   3538:              they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
                   3539:              namespace. The first time any user complains about this, we'll
                   3540:              need to make LTWRAPPER_OPTION_PREFIX a configure-time option
                   3541:              or a configure.ac-settable value.
                   3542:            */
                   3543:           lt_fatal ("Unrecognized option in %s namespace: '%s'",
                   3544:                     ltwrapper_option_prefix, argv[i]);
                   3545:         }
                   3546:       /* otherwise ... */
                   3547:       newargz[++newargc] = xstrdup (argv[i]);
                   3548:     }
                   3549:   newargz[++newargc] = NULL;
                   3550: 
                   3551:   LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
                   3552:   for (i = 0; i < newargc; i++)
                   3553:     {
                   3554:       LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
                   3555:     }
                   3556: 
                   3557: EOF
                   3558: 
                   3559:            case $host_os in
                   3560:              mingw*)
                   3561:                cat <<"EOF"
                   3562:   /* execv doesn't actually work on mingw as expected on unix */
                   3563:   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
                   3564:   if (rval == -1)
                   3565:     {
                   3566:       /* failed to start process */
                   3567:       LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
                   3568:       return 127;
                   3569:     }
                   3570:   return rval;
                   3571: EOF
                   3572:                ;;
                   3573:              *)
                   3574:                cat <<"EOF"
                   3575:   execv (lt_argv_zero, newargz);
                   3576:   return rval; /* =127, but avoids unused variable warning */
                   3577: EOF
                   3578:                ;;
                   3579:            esac
                   3580: 
                   3581:            cat <<"EOF"
                   3582: }
                   3583: 
                   3584: void *
                   3585: xmalloc (size_t num)
                   3586: {
                   3587:   void *p = (void *) malloc (num);
                   3588:   if (!p)
                   3589:     lt_fatal ("Memory exhausted");
                   3590: 
                   3591:   return p;
                   3592: }
                   3593: 
                   3594: char *
                   3595: xstrdup (const char *string)
                   3596: {
                   3597:   return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
                   3598:                          string) : NULL;
                   3599: }
                   3600: 
                   3601: const char *
                   3602: base_name (const char *name)
                   3603: {
                   3604:   const char *base;
                   3605: 
                   3606: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
                   3607:   /* Skip over the disk name in MSDOS pathnames. */
                   3608:   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
                   3609:     name += 2;
                   3610: #endif
                   3611: 
                   3612:   for (base = name; *name; name++)
                   3613:     if (IS_DIR_SEPARATOR (*name))
                   3614:       base = name + 1;
                   3615:   return base;
                   3616: }
                   3617: 
                   3618: int
                   3619: check_executable (const char *path)
                   3620: {
                   3621:   struct stat st;
                   3622: 
                   3623:   LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
                   3624:                          path ? (*path ? path : "EMPTY!") : "NULL!"));
                   3625:   if ((!path) || (!*path))
                   3626:     return 0;
                   3627: 
                   3628:   if ((stat (path, &st) >= 0)
                   3629:       && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
                   3630:     return 1;
                   3631:   else
                   3632:     return 0;
                   3633: }
                   3634: 
                   3635: int
                   3636: make_executable (const char *path)
                   3637: {
                   3638:   int rval = 0;
                   3639:   struct stat st;
                   3640: 
                   3641:   LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
                   3642:                          path ? (*path ? path : "EMPTY!") : "NULL!"));
                   3643:   if ((!path) || (!*path))
                   3644:     return 0;
                   3645: 
                   3646:   if (stat (path, &st) >= 0)
                   3647:     {
                   3648:       rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
                   3649:     }
                   3650:   return rval;
                   3651: }
                   3652: 
                   3653: /* Searches for the full path of the wrapper.  Returns
                   3654:    newly allocated full path name if found, NULL otherwise
                   3655:    Does not chase symlinks, even on platforms that support them.
                   3656: */
                   3657: char *
                   3658: find_executable (const char *wrapper)
                   3659: {
                   3660:   int has_slash = 0;
                   3661:   const char *p;
                   3662:   const char *p_next;
                   3663:   /* static buffer for getcwd */
                   3664:   char tmp[LT_PATHMAX + 1];
                   3665:   int tmp_len;
                   3666:   char *concat_name;
                   3667: 
                   3668:   LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
                   3669:                          wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
                   3670: 
                   3671:   if ((wrapper == NULL) || (*wrapper == '\0'))
                   3672:     return NULL;
                   3673: 
                   3674:   /* Absolute path? */
                   3675: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
                   3676:   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
                   3677:     {
                   3678:       concat_name = xstrdup (wrapper);
                   3679:       if (check_executable (concat_name))
                   3680:        return concat_name;
                   3681:       XFREE (concat_name);
                   3682:     }
                   3683:   else
                   3684:     {
                   3685: #endif
                   3686:       if (IS_DIR_SEPARATOR (wrapper[0]))
                   3687:        {
                   3688:          concat_name = xstrdup (wrapper);
                   3689:          if (check_executable (concat_name))
                   3690:            return concat_name;
                   3691:          XFREE (concat_name);
                   3692:        }
                   3693: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
                   3694:     }
                   3695: #endif
                   3696: 
                   3697:   for (p = wrapper; *p; p++)
                   3698:     if (*p == '/')
                   3699:       {
                   3700:        has_slash = 1;
                   3701:        break;
                   3702:       }
                   3703:   if (!has_slash)
                   3704:     {
                   3705:       /* no slashes; search PATH */
                   3706:       const char *path = getenv ("PATH");
                   3707:       if (path != NULL)
                   3708:        {
                   3709:          for (p = path; *p; p = p_next)
                   3710:            {
                   3711:              const char *q;
                   3712:              size_t p_len;
                   3713:              for (q = p; *q; q++)
                   3714:                if (IS_PATH_SEPARATOR (*q))
                   3715:                  break;
                   3716:              p_len = q - p;
                   3717:              p_next = (*q == '\0' ? q : q + 1);
                   3718:              if (p_len == 0)
                   3719:                {
                   3720:                  /* empty path: current directory */
                   3721:                  if (getcwd (tmp, LT_PATHMAX) == NULL)
                   3722:                    lt_fatal ("getcwd failed");
                   3723:                  tmp_len = strlen (tmp);
                   3724:                  concat_name =
                   3725:                    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
                   3726:                  memcpy (concat_name, tmp, tmp_len);
                   3727:                  concat_name[tmp_len] = '/';
                   3728:                  strcpy (concat_name + tmp_len + 1, wrapper);
                   3729:                }
                   3730:              else
                   3731:                {
                   3732:                  concat_name =
                   3733:                    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
                   3734:                  memcpy (concat_name, p, p_len);
                   3735:                  concat_name[p_len] = '/';
                   3736:                  strcpy (concat_name + p_len + 1, wrapper);
                   3737:                }
                   3738:              if (check_executable (concat_name))
                   3739:                return concat_name;
                   3740:              XFREE (concat_name);
                   3741:            }
                   3742:        }
                   3743:       /* not found in PATH; assume curdir */
                   3744:     }
                   3745:   /* Relative path | not found in path: prepend cwd */
                   3746:   if (getcwd (tmp, LT_PATHMAX) == NULL)
                   3747:     lt_fatal ("getcwd failed");
                   3748:   tmp_len = strlen (tmp);
                   3749:   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
                   3750:   memcpy (concat_name, tmp, tmp_len);
                   3751:   concat_name[tmp_len] = '/';
                   3752:   strcpy (concat_name + tmp_len + 1, wrapper);
                   3753: 
                   3754:   if (check_executable (concat_name))
                   3755:     return concat_name;
                   3756:   XFREE (concat_name);
                   3757:   return NULL;
                   3758: }
                   3759: 
                   3760: char *
                   3761: chase_symlinks (const char *pathspec)
                   3762: {
                   3763: #ifndef S_ISLNK
                   3764:   return xstrdup (pathspec);
                   3765: #else
                   3766:   char buf[LT_PATHMAX];
                   3767:   struct stat s;
                   3768:   char *tmp_pathspec = xstrdup (pathspec);
                   3769:   char *p;
                   3770:   int has_symlinks = 0;
                   3771:   while (strlen (tmp_pathspec) && !has_symlinks)
                   3772:     {
                   3773:       LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
                   3774:                              tmp_pathspec));
                   3775:       if (lstat (tmp_pathspec, &s) == 0)
                   3776:        {
                   3777:          if (S_ISLNK (s.st_mode) != 0)
                   3778:            {
                   3779:              has_symlinks = 1;
                   3780:              break;
                   3781:            }
                   3782: 
                   3783:          /* search backwards for last DIR_SEPARATOR */
                   3784:          p = tmp_pathspec + strlen (tmp_pathspec) - 1;
                   3785:          while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
                   3786:            p--;
                   3787:          if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
                   3788:            {
                   3789:              /* no more DIR_SEPARATORS left */
                   3790:              break;
                   3791:            }
                   3792:          *p = '\0';
                   3793:        }
                   3794:       else
                   3795:        {
                   3796:          char *errstr = strerror (errno);
                   3797:          lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
                   3798:        }
                   3799:     }
                   3800:   XFREE (tmp_pathspec);
                   3801: 
                   3802:   if (!has_symlinks)
                   3803:     {
                   3804:       return xstrdup (pathspec);
                   3805:     }
                   3806: 
                   3807:   tmp_pathspec = realpath (pathspec, buf);
                   3808:   if (tmp_pathspec == 0)
                   3809:     {
                   3810:       lt_fatal ("Could not follow symlinks for %s", pathspec);
                   3811:     }
                   3812:   return xstrdup (tmp_pathspec);
                   3813: #endif
                   3814: }
                   3815: 
                   3816: char *
                   3817: strendzap (char *str, const char *pat)
                   3818: {
                   3819:   size_t len, patlen;
                   3820: 
                   3821:   assert (str != NULL);
                   3822:   assert (pat != NULL);
                   3823: 
                   3824:   len = strlen (str);
                   3825:   patlen = strlen (pat);
                   3826: 
                   3827:   if (patlen <= len)
                   3828:     {
                   3829:       str += len - patlen;
                   3830:       if (strcmp (str, pat) == 0)
                   3831:        *str = '\0';
                   3832:     }
                   3833:   return str;
                   3834: }
                   3835: 
                   3836: static void
                   3837: lt_error_core (int exit_status, const char *mode,
                   3838:               const char *message, va_list ap)
                   3839: {
                   3840:   fprintf (stderr, "%s: %s: ", program_name, mode);
                   3841:   vfprintf (stderr, message, ap);
                   3842:   fprintf (stderr, ".\n");
                   3843: 
                   3844:   if (exit_status >= 0)
                   3845:     exit (exit_status);
                   3846: }
                   3847: 
                   3848: void
                   3849: lt_fatal (const char *message, ...)
                   3850: {
                   3851:   va_list ap;
                   3852:   va_start (ap, message);
                   3853:   lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
                   3854:   va_end (ap);
                   3855: }
                   3856: 
                   3857: void
                   3858: lt_setenv (const char *name, const char *value)
                   3859: {
                   3860:   LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
                   3861:                           (name ? name : "<NULL>"),
                   3862:                           (value ? value : "<NULL>")));
                   3863:   {
                   3864: #ifdef HAVE_SETENV
                   3865:     /* always make a copy, for consistency with !HAVE_SETENV */
                   3866:     char *str = xstrdup (value);
                   3867:     setenv (name, str, 1);
                   3868: #else
                   3869:     int len = strlen (name) + 1 + strlen (value) + 1;
                   3870:     char *str = XMALLOC (char, len);
                   3871:     sprintf (str, "%s=%s", name, value);
                   3872:     if (putenv (str) != EXIT_SUCCESS)
                   3873:       {
                   3874:         XFREE (str);
                   3875:       }
                   3876: #endif
                   3877:   }
                   3878: }
                   3879: 
                   3880: char *
                   3881: lt_extend_str (const char *orig_value, const char *add, int to_end)
                   3882: {
                   3883:   char *new_value;
                   3884:   if (orig_value && *orig_value)
                   3885:     {
                   3886:       int orig_value_len = strlen (orig_value);
                   3887:       int add_len = strlen (add);
                   3888:       new_value = XMALLOC (char, add_len + orig_value_len + 1);
                   3889:       if (to_end)
                   3890:         {
                   3891:           strcpy (new_value, orig_value);
                   3892:           strcpy (new_value + orig_value_len, add);
                   3893:         }
                   3894:       else
                   3895:         {
                   3896:           strcpy (new_value, add);
                   3897:           strcpy (new_value + add_len, orig_value);
                   3898:         }
                   3899:     }
                   3900:   else
                   3901:     {
                   3902:       new_value = xstrdup (add);
                   3903:     }
                   3904:   return new_value;
                   3905: }
                   3906: 
                   3907: int
                   3908: lt_split_name_value (const char *arg, char** name, char** value)
                   3909: {
                   3910:   const char *p;
                   3911:   int len;
                   3912:   if (!arg || !*arg)
                   3913:     return 1;
                   3914: 
                   3915:   p = strchr (arg, (int)'=');
                   3916: 
                   3917:   if (!p)
                   3918:     return 1;
                   3919: 
                   3920:   *value = xstrdup (++p);
                   3921: 
                   3922:   len = strlen (arg) - strlen (*value);
                   3923:   *name = XMALLOC (char, len);
                   3924:   strncpy (*name, arg, len-1);
                   3925:   (*name)[len - 1] = '\0';
                   3926: 
                   3927:   return 0;
                   3928: }
                   3929: 
                   3930: void
                   3931: lt_opt_process_env_set (const char *arg)
                   3932: {
                   3933:   char *name = NULL;
                   3934:   char *value = NULL;
                   3935: 
                   3936:   if (lt_split_name_value (arg, &name, &value) != 0)
                   3937:     {
                   3938:       XFREE (name);
                   3939:       XFREE (value);
                   3940:       lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
                   3941:     }
                   3942: 
                   3943:   lt_setenv (name, value);
                   3944:   XFREE (name);
                   3945:   XFREE (value);
                   3946: }
                   3947: 
                   3948: void
                   3949: lt_opt_process_env_prepend (const char *arg)
                   3950: {
                   3951:   char *name = NULL;
                   3952:   char *value = NULL;
                   3953:   char *new_value = NULL;
                   3954: 
                   3955:   if (lt_split_name_value (arg, &name, &value) != 0)
                   3956:     {
                   3957:       XFREE (name);
                   3958:       XFREE (value);
                   3959:       lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
                   3960:     }
                   3961: 
                   3962:   new_value = lt_extend_str (getenv (name), value, 0);
                   3963:   lt_setenv (name, new_value);
                   3964:   XFREE (new_value);
                   3965:   XFREE (name);
                   3966:   XFREE (value);
                   3967: }
                   3968: 
                   3969: void
                   3970: lt_opt_process_env_append (const char *arg)
                   3971: {
                   3972:   char *name = NULL;
                   3973:   char *value = NULL;
                   3974:   char *new_value = NULL;
                   3975: 
                   3976:   if (lt_split_name_value (arg, &name, &value) != 0)
                   3977:     {
                   3978:       XFREE (name);
                   3979:       XFREE (value);
                   3980:       lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
                   3981:     }
                   3982: 
                   3983:   new_value = lt_extend_str (getenv (name), value, 1);
                   3984:   lt_setenv (name, new_value);
                   3985:   XFREE (new_value);
                   3986:   XFREE (name);
                   3987:   XFREE (value);
                   3988: }
                   3989: 
                   3990: void
                   3991: lt_update_exe_path (const char *name, const char *value)
                   3992: {
                   3993:   LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
                   3994:                           (name ? name : "<NULL>"),
                   3995:                           (value ? value : "<NULL>")));
                   3996: 
                   3997:   if (name && *name && value && *value)
                   3998:     {
                   3999:       char *new_value = lt_extend_str (getenv (name), value, 0);
                   4000:       /* some systems can't cope with a ':'-terminated path #' */
                   4001:       int len = strlen (new_value);
                   4002:       while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
                   4003:         {
                   4004:           new_value[len-1] = '\0';
                   4005:         }
                   4006:       lt_setenv (name, new_value);
                   4007:       XFREE (new_value);
                   4008:     }
                   4009: }
                   4010: 
                   4011: void
                   4012: lt_update_lib_path (const char *name, const char *value)
                   4013: {
                   4014:   LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
                   4015:                           (name ? name : "<NULL>"),
                   4016:                           (value ? value : "<NULL>")));
                   4017: 
                   4018:   if (name && *name && value && *value)
                   4019:     {
                   4020:       char *new_value = lt_extend_str (getenv (name), value, 0);
                   4021:       lt_setenv (name, new_value);
                   4022:       XFREE (new_value);
                   4023:     }
                   4024: }
                   4025: 
                   4026: 
                   4027: EOF
                   4028: }
                   4029: # end: func_emit_cwrapperexe_src
                   4030: 
                   4031: # func_mode_link arg...
                   4032: func_mode_link ()
                   4033: {
                   4034:     $opt_debug
                   4035:     case $host in
                   4036:     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
                   4037:       # It is impossible to link a dll without this setting, and
                   4038:       # we shouldn't force the makefile maintainer to figure out
                   4039:       # which system we are compiling for in order to pass an extra
                   4040:       # flag for every libtool invocation.
                   4041:       # allow_undefined=no
                   4042: 
                   4043:       # FIXME: Unfortunately, there are problems with the above when trying
                   4044:       # to make a dll which has undefined symbols, in which case not
                   4045:       # even a static library is built.  For now, we need to specify
                   4046:       # -no-undefined on the libtool link line when we can be certain
                   4047:       # that all symbols are satisfied, otherwise we get a static library.
                   4048:       allow_undefined=yes
                   4049:       ;;
                   4050:     *)
                   4051:       allow_undefined=yes
                   4052:       ;;
                   4053:     esac
                   4054:     libtool_args=$nonopt
                   4055:     base_compile="$nonopt $@"
                   4056:     compile_command=$nonopt
                   4057:     finalize_command=$nonopt
                   4058: 
                   4059:     compile_rpath=
                   4060:     finalize_rpath=
                   4061:     compile_shlibpath=
                   4062:     finalize_shlibpath=
                   4063:     convenience=
                   4064:     old_convenience=
                   4065:     deplibs=
                   4066:     old_deplibs=
                   4067:     compiler_flags=
                   4068:     linker_flags=
                   4069:     dllsearchpath=
                   4070:     lib_search_path=`pwd`
                   4071:     inst_prefix_dir=
                   4072:     new_inherited_linker_flags=
                   4073: 
                   4074:     avoid_version=no
                   4075:     dlfiles=
                   4076:     dlprefiles=
                   4077:     dlself=no
                   4078:     export_dynamic=no
                   4079:     export_symbols=
                   4080:     export_symbols_regex=
                   4081:     generated=
                   4082:     libobjs=
                   4083:     ltlibs=
                   4084:     module=no
                   4085:     no_install=no
                   4086:     objs=
                   4087:     non_pic_objects=
                   4088:     precious_files_regex=
                   4089:     prefer_static_libs=no
                   4090:     preload=no
                   4091:     prev=
                   4092:     prevarg=
                   4093:     release=
                   4094:     rpath=
                   4095:     xrpath=
                   4096:     perm_rpath=
                   4097:     temp_rpath=
                   4098:     thread_safe=no
                   4099:     vinfo=
                   4100:     vinfo_number=no
                   4101:     weak_libs=
                   4102:     single_module="${wl}-single_module"
                   4103:     func_infer_tag $base_compile
                   4104: 
                   4105:     # We need to know -static, to get the right output filenames.
                   4106:     for arg
                   4107:     do
                   4108:       case $arg in
                   4109:       -shared)
                   4110:        test "$build_libtool_libs" != yes && \
                   4111:          func_fatal_configuration "can not build a shared library"
                   4112:        build_old_libs=no
                   4113:        break
                   4114:        ;;
                   4115:       -all-static | -static | -static-libtool-libs)
                   4116:        case $arg in
                   4117:        -all-static)
                   4118:          if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
                   4119:            func_warning "complete static linking is impossible in this configuration"
                   4120:          fi
                   4121:          if test -n "$link_static_flag"; then
                   4122:            dlopen_self=$dlopen_self_static
                   4123:          fi
                   4124:          prefer_static_libs=yes
                   4125:          ;;
                   4126:        -static)
                   4127:          if test -z "$pic_flag" && test -n "$link_static_flag"; then
                   4128:            dlopen_self=$dlopen_self_static
                   4129:          fi
                   4130:          prefer_static_libs=built
                   4131:          ;;
                   4132:        -static-libtool-libs)
                   4133:          if test -z "$pic_flag" && test -n "$link_static_flag"; then
                   4134:            dlopen_self=$dlopen_self_static
                   4135:          fi
                   4136:          prefer_static_libs=yes
                   4137:          ;;
                   4138:        esac
                   4139:        build_libtool_libs=no
                   4140:        build_old_libs=yes
                   4141:        break
                   4142:        ;;
                   4143:       esac
                   4144:     done
                   4145: 
                   4146:     # See if our shared archives depend on static archives.
                   4147:     test -n "$old_archive_from_new_cmds" && build_old_libs=yes
                   4148: 
                   4149:     # Go through the arguments, transforming them on the way.
                   4150:     while test "$#" -gt 0; do
                   4151:       arg="$1"
                   4152:       shift
                   4153:       func_quote_for_eval "$arg"
                   4154:       qarg=$func_quote_for_eval_unquoted_result
                   4155:       func_append libtool_args " $func_quote_for_eval_result"
                   4156: 
                   4157:       # If the previous option needs an argument, assign it.
                   4158:       if test -n "$prev"; then
                   4159:        case $prev in
                   4160:        output)
                   4161:          func_append compile_command " @OUTPUT@"
                   4162:          func_append finalize_command " @OUTPUT@"
                   4163:          ;;
                   4164:        esac
                   4165: 
                   4166:        case $prev in
                   4167:        dlfiles|dlprefiles)
                   4168:          if test "$preload" = no; then
                   4169:            # Add the symbol object into the linking commands.
                   4170:            func_append compile_command " @SYMFILE@"
                   4171:            func_append finalize_command " @SYMFILE@"
                   4172:            preload=yes
                   4173:          fi
                   4174:          case $arg in
                   4175:          *.la | *.lo) ;;  # We handle these cases below.
                   4176:          force)
                   4177:            if test "$dlself" = no; then
                   4178:              dlself=needless
                   4179:              export_dynamic=yes
                   4180:            fi
                   4181:            prev=
                   4182:            continue
                   4183:            ;;
                   4184:          self)
                   4185:            if test "$prev" = dlprefiles; then
                   4186:              dlself=yes
                   4187:            elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
                   4188:              dlself=yes
                   4189:            else
                   4190:              dlself=needless
                   4191:              export_dynamic=yes
                   4192:            fi
                   4193:            prev=
                   4194:            continue
                   4195:            ;;
                   4196:          *)
                   4197:            if test "$prev" = dlfiles; then
                   4198:              dlfiles="$dlfiles $arg"
                   4199:            else
                   4200:              dlprefiles="$dlprefiles $arg"
                   4201:            fi
                   4202:            prev=
                   4203:            continue
                   4204:            ;;
                   4205:          esac
                   4206:          ;;
                   4207:        expsyms)
                   4208:          export_symbols="$arg"
                   4209:          test -f "$arg" \
                   4210:            || func_fatal_error "symbol file \`$arg' does not exist"
                   4211:          prev=
                   4212:          continue
                   4213:          ;;
                   4214:        expsyms_regex)
                   4215:          export_symbols_regex="$arg"
                   4216:          prev=
                   4217:          continue
                   4218:          ;;
                   4219:        framework)
                   4220:          case $host in
                   4221:            *-*-darwin*)
                   4222:              case "$deplibs " in
                   4223:                *" $qarg.ltframework "*) ;;
                   4224:                *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
                   4225:                   ;;
                   4226:              esac
                   4227:              ;;
                   4228:          esac
                   4229:          prev=
                   4230:          continue
                   4231:          ;;
                   4232:        inst_prefix)
                   4233:          inst_prefix_dir="$arg"
                   4234:          prev=
                   4235:          continue
                   4236:          ;;
                   4237:        objectlist)
                   4238:          if test -f "$arg"; then
                   4239:            save_arg=$arg
                   4240:            moreargs=
                   4241:            for fil in `cat "$save_arg"`
                   4242:            do
                   4243: #            moreargs="$moreargs $fil"
                   4244:              arg=$fil
                   4245:              # A libtool-controlled object.
                   4246: 
                   4247:              # Check to see that this really is a libtool object.
                   4248:              if func_lalib_unsafe_p "$arg"; then
                   4249:                pic_object=
                   4250:                non_pic_object=
                   4251: 
                   4252:                # Read the .lo file
                   4253:                func_source "$arg"
                   4254: 
                   4255:                if test -z "$pic_object" ||
                   4256:                   test -z "$non_pic_object" ||
                   4257:                   test "$pic_object" = none &&
                   4258:                   test "$non_pic_object" = none; then
                   4259:                  func_fatal_error "cannot find name of object for \`$arg'"
                   4260:                fi
                   4261: 
                   4262:                # Extract subdirectory from the argument.
                   4263:                func_dirname "$arg" "/" ""
                   4264:                xdir="$func_dirname_result"
                   4265: 
                   4266:                if test "$pic_object" != none; then
                   4267:                  # Prepend the subdirectory the object is found in.
                   4268:                  pic_object="$xdir$pic_object"
                   4269: 
                   4270:                  if test "$prev" = dlfiles; then
                   4271:                    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
                   4272:                      dlfiles="$dlfiles $pic_object"
                   4273:                      prev=
                   4274:                      continue
                   4275:                    else
                   4276:                      # If libtool objects are unsupported, then we need to preload.
                   4277:                      prev=dlprefiles
                   4278:                    fi
                   4279:                  fi
                   4280: 
                   4281:                  # CHECK ME:  I think I busted this.  -Ossama
                   4282:                  if test "$prev" = dlprefiles; then
                   4283:                    # Preload the old-style object.
                   4284:                    dlprefiles="$dlprefiles $pic_object"
                   4285:                    prev=
                   4286:                  fi
                   4287: 
                   4288:                  # A PIC object.
                   4289:                  func_append libobjs " $pic_object"
                   4290:                  arg="$pic_object"
                   4291:                fi
                   4292: 
                   4293:                # Non-PIC object.
                   4294:                if test "$non_pic_object" != none; then
                   4295:                  # Prepend the subdirectory the object is found in.
                   4296:                  non_pic_object="$xdir$non_pic_object"
                   4297: 
                   4298:                  # A standard non-PIC object
                   4299:                  func_append non_pic_objects " $non_pic_object"
                   4300:                  if test -z "$pic_object" || test "$pic_object" = none ; then
                   4301:                    arg="$non_pic_object"
                   4302:                  fi
                   4303:                else
                   4304:                  # If the PIC object exists, use it instead.
                   4305:                  # $xdir was prepended to $pic_object above.
                   4306:                  non_pic_object="$pic_object"
                   4307:                  func_append non_pic_objects " $non_pic_object"
                   4308:                fi
                   4309:              else
                   4310:                # Only an error if not doing a dry-run.
                   4311:                if $opt_dry_run; then
                   4312:                  # Extract subdirectory from the argument.
                   4313:                  func_dirname "$arg" "/" ""
                   4314:                  xdir="$func_dirname_result"
                   4315: 
                   4316:                  func_lo2o "$arg"
                   4317:                  pic_object=$xdir$objdir/$func_lo2o_result
                   4318:                  non_pic_object=$xdir$func_lo2o_result
                   4319:                  func_append libobjs " $pic_object"
                   4320:                  func_append non_pic_objects " $non_pic_object"
                   4321:                else
                   4322:                  func_fatal_error "\`$arg' is not a valid libtool object"
                   4323:                fi
                   4324:              fi
                   4325:            done
                   4326:          else
                   4327:            func_fatal_error "link input file \`$arg' does not exist"
                   4328:          fi
                   4329:          arg=$save_arg
                   4330:          prev=
                   4331:          continue
                   4332:          ;;
                   4333:        precious_regex)
                   4334:          precious_files_regex="$arg"
                   4335:          prev=
                   4336:          continue
                   4337:          ;;
                   4338:        release)
                   4339:          release="-$arg"
                   4340:          prev=
                   4341:          continue
                   4342:          ;;
                   4343:        rpath | xrpath)
                   4344:          # We need an absolute path.
                   4345:          case $arg in
                   4346:          [\\/]* | [A-Za-z]:[\\/]*) ;;
                   4347:          *)
                   4348:            func_fatal_error "only absolute run-paths are allowed"
                   4349:            ;;
                   4350:          esac
                   4351:          if test "$prev" = rpath; then
                   4352:            case "$rpath " in
                   4353:            *" $arg "*) ;;
                   4354:            *) rpath="$rpath $arg" ;;
                   4355:            esac
                   4356:          else
                   4357:            case "$xrpath " in
                   4358:            *" $arg "*) ;;
                   4359:            *) xrpath="$xrpath $arg" ;;
                   4360:            esac
                   4361:          fi
                   4362:          prev=
                   4363:          continue
                   4364:          ;;
                   4365:        shrext)
                   4366:          shrext_cmds="$arg"
                   4367:          prev=
                   4368:          continue
                   4369:          ;;
                   4370:        weak)
                   4371:          weak_libs="$weak_libs $arg"
                   4372:          prev=
                   4373:          continue
                   4374:          ;;
                   4375:        xcclinker)
                   4376:          linker_flags="$linker_flags $qarg"
                   4377:          compiler_flags="$compiler_flags $qarg"
                   4378:          prev=
                   4379:          func_append compile_command " $qarg"
                   4380:          func_append finalize_command " $qarg"
                   4381:          continue
                   4382:          ;;
                   4383:        xcompiler)
                   4384:          compiler_flags="$compiler_flags $qarg"
                   4385:          prev=
                   4386:          func_append compile_command " $qarg"
                   4387:          func_append finalize_command " $qarg"
                   4388:          continue
                   4389:          ;;
                   4390:        xlinker)
                   4391:          linker_flags="$linker_flags $qarg"
                   4392:          compiler_flags="$compiler_flags $wl$qarg"
                   4393:          prev=
                   4394:          func_append compile_command " $wl$qarg"
                   4395:          func_append finalize_command " $wl$qarg"
                   4396:          continue
                   4397:          ;;
                   4398:        *)
                   4399:          eval "$prev=\"\$arg\""
                   4400:          prev=
                   4401:          continue
                   4402:          ;;
                   4403:        esac
                   4404:       fi # test -n "$prev"
                   4405: 
                   4406:       prevarg="$arg"
                   4407: 
                   4408:       case $arg in
                   4409:       -all-static)
                   4410:        if test -n "$link_static_flag"; then
                   4411:          # See comment for -static flag below, for more details.
                   4412:          func_append compile_command " $link_static_flag"
                   4413:          func_append finalize_command " $link_static_flag"
                   4414:        fi
                   4415:        continue
                   4416:        ;;
                   4417: 
                   4418:       -allow-undefined)
                   4419:        # FIXME: remove this flag sometime in the future.
                   4420:        func_fatal_error "\`-allow-undefined' must not be used because it is the default"
                   4421:        ;;
                   4422: 
                   4423:       -avoid-version)
                   4424:        avoid_version=yes
                   4425:        continue
                   4426:        ;;
                   4427: 
                   4428:       -dlopen)
                   4429:        prev=dlfiles
                   4430:        continue
                   4431:        ;;
                   4432: 
                   4433:       -dlpreopen)
                   4434:        prev=dlprefiles
                   4435:        continue
                   4436:        ;;
                   4437: 
                   4438:       -export-dynamic)
                   4439:        export_dynamic=yes
                   4440:        continue
                   4441:        ;;
                   4442: 
                   4443:       -export-symbols | -export-symbols-regex)
                   4444:        if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
                   4445:          func_fatal_error "more than one -exported-symbols argument is not allowed"
                   4446:        fi
                   4447:        if test "X$arg" = "X-export-symbols"; then
                   4448:          prev=expsyms
                   4449:        else
                   4450:          prev=expsyms_regex
                   4451:        fi
                   4452:        continue
                   4453:        ;;
                   4454: 
                   4455:       -framework)
                   4456:        prev=framework
                   4457:        continue
                   4458:        ;;
                   4459: 
                   4460:       -inst-prefix-dir)
                   4461:        prev=inst_prefix
                   4462:        continue
                   4463:        ;;
                   4464: 
                   4465:       # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
                   4466:       # so, if we see these flags be careful not to treat them like -L
                   4467:       -L[A-Z][A-Z]*:*)
                   4468:        case $with_gcc/$host in
                   4469:        no/*-*-irix* | /*-*-irix*)
                   4470:          func_append compile_command " $arg"
                   4471:          func_append finalize_command " $arg"
                   4472:          ;;
                   4473:        esac
                   4474:        continue
                   4475:        ;;
                   4476: 
                   4477:       -L*)
                   4478:        func_stripname '-L' '' "$arg"
                   4479:        dir=$func_stripname_result
                   4480:        if test -z "$dir"; then
                   4481:          if test "$#" -gt 0; then
                   4482:            func_fatal_error "require no space between \`-L' and \`$1'"
                   4483:          else
                   4484:            func_fatal_error "need path for \`-L' option"
                   4485:          fi
                   4486:        fi
                   4487:        # We need an absolute path.
                   4488:        case $dir in
                   4489:        [\\/]* | [A-Za-z]:[\\/]*) ;;
                   4490:        *)
                   4491:          absdir=`cd "$dir" && pwd`
                   4492:          test -z "$absdir" && \
                   4493:            func_fatal_error "cannot determine absolute directory name of \`$dir'"
                   4494:          dir="$absdir"
                   4495:          ;;
                   4496:        esac
                   4497:        case "$deplibs " in
                   4498:        *" -L$dir "*) ;;
                   4499:        *)
                   4500:          deplibs="$deplibs -L$dir"
                   4501:          lib_search_path="$lib_search_path $dir"
                   4502:          ;;
                   4503:        esac
                   4504:        case $host in
                   4505:        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
                   4506:          testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
                   4507:          case :$dllsearchpath: in
                   4508:          *":$dir:"*) ;;
                   4509:          ::) dllsearchpath=$dir;;
                   4510:          *) dllsearchpath="$dllsearchpath:$dir";;
                   4511:          esac
                   4512:          case :$dllsearchpath: in
                   4513:          *":$testbindir:"*) ;;
                   4514:          ::) dllsearchpath=$testbindir;;
                   4515:          *) dllsearchpath="$dllsearchpath:$testbindir";;
                   4516:          esac
                   4517:          ;;
                   4518:        esac
                   4519:        continue
                   4520:        ;;
                   4521: 
                   4522:       -l*)
                   4523:        if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
                   4524:          case $host in
                   4525:          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
                   4526:            # These systems don't actually have a C or math library (as such)
                   4527:            continue
                   4528:            ;;
                   4529:          *-*-os2*)
                   4530:            # These systems don't actually have a C library (as such)
                   4531:            test "X$arg" = "X-lc" && continue
                   4532:            ;;
                   4533:          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
                   4534:            # Do not include libc due to us having libc/libc_r.
                   4535:            test "X$arg" = "X-lc" && continue
                   4536:            ;;
                   4537:          *-*-rhapsody* | *-*-darwin1.[012])
                   4538:            # Rhapsody C and math libraries are in the System framework
                   4539:            deplibs="$deplibs System.ltframework"
                   4540:            continue
                   4541:            ;;
                   4542:          *-*-sco3.2v5* | *-*-sco5v6*)
                   4543:            # Causes problems with __ctype
                   4544:            test "X$arg" = "X-lc" && continue
                   4545:            ;;
                   4546:          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
                   4547:            # Compiler inserts libc in the correct place for threads to work
                   4548:            test "X$arg" = "X-lc" && continue
                   4549:            ;;
                   4550:          esac
                   4551:        elif test "X$arg" = "X-lc_r"; then
                   4552:         case $host in
                   4553:         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
                   4554:           # Do not include libc_r directly, use -pthread flag.
                   4555:           continue
                   4556:           ;;
                   4557:         esac
                   4558:        fi
                   4559:        deplibs="$deplibs $arg"
                   4560:        continue
                   4561:        ;;
                   4562: 
                   4563:       -module)
                   4564:        module=yes
                   4565:        continue
                   4566:        ;;
                   4567: 
                   4568:       # Tru64 UNIX uses -model [arg] to determine the layout of C++
                   4569:       # classes, name mangling, and exception handling.
                   4570:       # Darwin uses the -arch flag to determine output architecture.
                   4571:       -model|-arch|-isysroot)
                   4572:        compiler_flags="$compiler_flags $arg"
                   4573:        func_append compile_command " $arg"
                   4574:        func_append finalize_command " $arg"
                   4575:        prev=xcompiler
                   4576:        continue
                   4577:        ;;
                   4578: 
                   4579:       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
                   4580:        compiler_flags="$compiler_flags $arg"
                   4581:        func_append compile_command " $arg"
                   4582:        func_append finalize_command " $arg"
                   4583:        case "$new_inherited_linker_flags " in
                   4584:            *" $arg "*) ;;
                   4585:            * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
                   4586:        esac
                   4587:        continue
                   4588:        ;;
                   4589: 
                   4590:       -multi_module)
                   4591:        single_module="${wl}-multi_module"
                   4592:        continue
                   4593:        ;;
                   4594: 
                   4595:       -no-fast-install)
                   4596:        fast_install=no
                   4597:        continue
                   4598:        ;;
                   4599: 
                   4600:       -no-install)
                   4601:        case $host in
                   4602:        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
                   4603:          # The PATH hackery in wrapper scripts is required on Windows
                   4604:          # and Darwin in order for the loader to find any dlls it needs.
                   4605:          func_warning "\`-no-install' is ignored for $host"
                   4606:          func_warning "assuming \`-no-fast-install' instead"
                   4607:          fast_install=no
                   4608:          ;;
                   4609:        *) no_install=yes ;;
                   4610:        esac
                   4611:        continue
                   4612:        ;;
                   4613: 
                   4614:       -no-undefined)
                   4615:        allow_undefined=no
                   4616:        continue
                   4617:        ;;
                   4618: 
                   4619:       -objectlist)
                   4620:        prev=objectlist
                   4621:        continue
                   4622:        ;;
                   4623: 
                   4624:       -o) prev=output ;;
                   4625: 
                   4626:       -precious-files-regex)
                   4627:        prev=precious_regex
                   4628:        continue
                   4629:        ;;
                   4630: 
                   4631:       -release)
                   4632:        prev=release
                   4633:        continue
                   4634:        ;;
                   4635: 
                   4636:       -rpath)
                   4637:        prev=rpath
                   4638:        continue
                   4639:        ;;
                   4640: 
                   4641:       -R)
                   4642:        prev=xrpath
                   4643:        continue
                   4644:        ;;
                   4645: 
                   4646:       -R*)
                   4647:        func_stripname '-R' '' "$arg"
                   4648:        dir=$func_stripname_result
                   4649:        # We need an absolute path.
                   4650:        case $dir in
                   4651:        [\\/]* | [A-Za-z]:[\\/]*) ;;
                   4652:        *)
                   4653:          func_fatal_error "only absolute run-paths are allowed"
                   4654:          ;;
                   4655:        esac
                   4656:        case "$xrpath " in
                   4657:        *" $dir "*) ;;
                   4658:        *) xrpath="$xrpath $dir" ;;
                   4659:        esac
                   4660:        continue
                   4661:        ;;
                   4662: 
                   4663:       -shared)
                   4664:        # The effects of -shared are defined in a previous loop.
                   4665:        continue
                   4666:        ;;
                   4667: 
                   4668:       -shrext)
                   4669:        prev=shrext
                   4670:        continue
                   4671:        ;;
                   4672: 
                   4673:       -static | -static-libtool-libs)
                   4674:        # The effects of -static are defined in a previous loop.
                   4675:        # We used to do the same as -all-static on platforms that
                   4676:        # didn't have a PIC flag, but the assumption that the effects
                   4677:        # would be equivalent was wrong.  It would break on at least
                   4678:        # Digital Unix and AIX.
                   4679:        continue
                   4680:        ;;
                   4681: 
                   4682:       -thread-safe)
                   4683:        thread_safe=yes
                   4684:        continue
                   4685:        ;;
                   4686: 
                   4687:       -version-info)
                   4688:        prev=vinfo
                   4689:        continue
                   4690:        ;;
                   4691: 
                   4692:       -version-number)
                   4693:        prev=vinfo
                   4694:        vinfo_number=yes
                   4695:        continue
                   4696:        ;;
                   4697: 
                   4698:       -weak)
                   4699:         prev=weak
                   4700:        continue
                   4701:        ;;
                   4702: 
                   4703:       -Wc,*)
                   4704:        func_stripname '-Wc,' '' "$arg"
                   4705:        args=$func_stripname_result
                   4706:        arg=
                   4707:        save_ifs="$IFS"; IFS=','
                   4708:        for flag in $args; do
                   4709:          IFS="$save_ifs"
                   4710:           func_quote_for_eval "$flag"
                   4711:          arg="$arg $wl$func_quote_for_eval_result"
                   4712:          compiler_flags="$compiler_flags $func_quote_for_eval_result"
                   4713:        done
                   4714:        IFS="$save_ifs"
                   4715:        func_stripname ' ' '' "$arg"
                   4716:        arg=$func_stripname_result
                   4717:        ;;
                   4718: 
                   4719:       -Wl,*)
                   4720:        func_stripname '-Wl,' '' "$arg"
                   4721:        args=$func_stripname_result
                   4722:        arg=
                   4723:        save_ifs="$IFS"; IFS=','
                   4724:        for flag in $args; do
                   4725:          IFS="$save_ifs"
                   4726:           func_quote_for_eval "$flag"
                   4727:          arg="$arg $wl$func_quote_for_eval_result"
                   4728:          compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
                   4729:          linker_flags="$linker_flags $func_quote_for_eval_result"
                   4730:        done
                   4731:        IFS="$save_ifs"
                   4732:        func_stripname ' ' '' "$arg"
                   4733:        arg=$func_stripname_result
                   4734:        ;;
                   4735: 
                   4736:       -Xcompiler)
                   4737:        prev=xcompiler
                   4738:        continue
                   4739:        ;;
                   4740: 
                   4741:       -Xlinker)
                   4742:        prev=xlinker
                   4743:        continue
                   4744:        ;;
                   4745: 
                   4746:       -XCClinker)
                   4747:        prev=xcclinker
                   4748:        continue
                   4749:        ;;
                   4750: 
                   4751:       # -msg_* for osf cc
                   4752:       -msg_*)
                   4753:        func_quote_for_eval "$arg"
                   4754:        arg="$func_quote_for_eval_result"
                   4755:        ;;
                   4756: 
                   4757:       # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
                   4758:       # -r[0-9][0-9]* specifies the processor on the SGI compiler
                   4759:       # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
                   4760:       # +DA*, +DD* enable 64-bit mode on the HP compiler
                   4761:       # -q* pass through compiler args for the IBM compiler
                   4762:       # -m*, -t[45]*, -txscale* pass through architecture-specific
                   4763:       # compiler args for GCC
                   4764:       # -F/path gives path to uninstalled frameworks, gcc on darwin
                   4765:       # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
                   4766:       # @file GCC response files
                   4767:       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
                   4768:       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
                   4769:         func_quote_for_eval "$arg"
                   4770:        arg="$func_quote_for_eval_result"
                   4771:         func_append compile_command " $arg"
                   4772:         func_append finalize_command " $arg"
                   4773:         compiler_flags="$compiler_flags $arg"
                   4774:         continue
                   4775:         ;;
                   4776: 
                   4777:       # Some other compiler flag.
                   4778:       -* | +*)
                   4779:         func_quote_for_eval "$arg"
                   4780:        arg="$func_quote_for_eval_result"
                   4781:        ;;
                   4782: 
                   4783:       *.$objext)
                   4784:        # A standard object.
                   4785:        objs="$objs $arg"
                   4786:        ;;
                   4787: 
                   4788:       *.lo)
                   4789:        # A libtool-controlled object.
                   4790: 
                   4791:        # Check to see that this really is a libtool object.
                   4792:        if func_lalib_unsafe_p "$arg"; then
                   4793:          pic_object=
                   4794:          non_pic_object=
                   4795: 
                   4796:          # Read the .lo file
                   4797:          func_source "$arg"
                   4798: 
                   4799:          if test -z "$pic_object" ||
                   4800:             test -z "$non_pic_object" ||
                   4801:             test "$pic_object" = none &&
                   4802:             test "$non_pic_object" = none; then
                   4803:            func_fatal_error "cannot find name of object for \`$arg'"
                   4804:          fi
                   4805: 
                   4806:          # Extract subdirectory from the argument.
                   4807:          func_dirname "$arg" "/" ""
                   4808:          xdir="$func_dirname_result"
                   4809: 
                   4810:          if test "$pic_object" != none; then
                   4811:            # Prepend the subdirectory the object is found in.
                   4812:            pic_object="$xdir$pic_object"
                   4813: 
                   4814:            if test "$prev" = dlfiles; then
                   4815:              if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
                   4816:                dlfiles="$dlfiles $pic_object"
                   4817:                prev=
                   4818:                continue
                   4819:              else
                   4820:                # If libtool objects are unsupported, then we need to preload.
                   4821:                prev=dlprefiles
                   4822:              fi
                   4823:            fi
                   4824: 
                   4825:            # CHECK ME:  I think I busted this.  -Ossama
                   4826:            if test "$prev" = dlprefiles; then
                   4827:              # Preload the old-style object.
                   4828:              dlprefiles="$dlprefiles $pic_object"
                   4829:              prev=
                   4830:            fi
                   4831: 
                   4832:            # A PIC object.
                   4833:            func_append libobjs " $pic_object"
                   4834:            arg="$pic_object"
                   4835:          fi
                   4836: 
                   4837:          # Non-PIC object.
                   4838:          if test "$non_pic_object" != none; then
                   4839:            # Prepend the subdirectory the object is found in.
                   4840:            non_pic_object="$xdir$non_pic_object"
                   4841: 
                   4842:            # A standard non-PIC object
                   4843:            func_append non_pic_objects " $non_pic_object"
                   4844:            if test -z "$pic_object" || test "$pic_object" = none ; then
                   4845:              arg="$non_pic_object"
                   4846:            fi
                   4847:          else
                   4848:            # If the PIC object exists, use it instead.
                   4849:            # $xdir was prepended to $pic_object above.
                   4850:            non_pic_object="$pic_object"
                   4851:            func_append non_pic_objects " $non_pic_object"
                   4852:          fi
                   4853:        else
                   4854:          # Only an error if not doing a dry-run.
                   4855:          if $opt_dry_run; then
                   4856:            # Extract subdirectory from the argument.
                   4857:            func_dirname "$arg" "/" ""
                   4858:            xdir="$func_dirname_result"
                   4859: 
                   4860:            func_lo2o "$arg"
                   4861:            pic_object=$xdir$objdir/$func_lo2o_result
                   4862:            non_pic_object=$xdir$func_lo2o_result
                   4863:            func_append libobjs " $pic_object"
                   4864:            func_append non_pic_objects " $non_pic_object"
                   4865:          else
                   4866:            func_fatal_error "\`$arg' is not a valid libtool object"
                   4867:          fi
                   4868:        fi
                   4869:        ;;
                   4870: 
                   4871:       *.$libext)
                   4872:        # An archive.
                   4873:        deplibs="$deplibs $arg"
                   4874:        old_deplibs="$old_deplibs $arg"
                   4875:        continue
                   4876:        ;;
                   4877: 
                   4878:       *.la)
                   4879:        # A libtool-controlled library.
                   4880: 
                   4881:        if test "$prev" = dlfiles; then
                   4882:          # This library was specified with -dlopen.
                   4883:          dlfiles="$dlfiles $arg"
                   4884:          prev=
                   4885:        elif test "$prev" = dlprefiles; then
                   4886:          # The library was specified with -dlpreopen.
                   4887:          dlprefiles="$dlprefiles $arg"
                   4888:          prev=
                   4889:        else
                   4890:          deplibs="$deplibs $arg"
                   4891:        fi
                   4892:        continue
                   4893:        ;;
                   4894: 
                   4895:       # Some other compiler argument.
                   4896:       *)
                   4897:        # Unknown arguments in both finalize_command and compile_command need
                   4898:        # to be aesthetically quoted because they are evaled later.
                   4899:        func_quote_for_eval "$arg"
                   4900:        arg="$func_quote_for_eval_result"
                   4901:        ;;
                   4902:       esac # arg
                   4903: 
                   4904:       # Now actually substitute the argument into the commands.
                   4905:       if test -n "$arg"; then
                   4906:        func_append compile_command " $arg"
                   4907:        func_append finalize_command " $arg"
                   4908:       fi
                   4909:     done # argument parsing loop
                   4910: 
                   4911:     test -n "$prev" && \
                   4912:       func_fatal_help "the \`$prevarg' option requires an argument"
                   4913: 
                   4914:     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
                   4915:       eval arg=\"$export_dynamic_flag_spec\"
                   4916:       func_append compile_command " $arg"
                   4917:       func_append finalize_command " $arg"
                   4918:     fi
                   4919: 
                   4920:     oldlibs=
                   4921:     # calculate the name of the file, without its directory
                   4922:     func_basename "$output"
                   4923:     outputname="$func_basename_result"
                   4924:     libobjs_save="$libobjs"
                   4925: 
                   4926:     if test -n "$shlibpath_var"; then
                   4927:       # get the directories listed in $shlibpath_var
                   4928:       eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
                   4929:     else
                   4930:       shlib_search_path=
                   4931:     fi
                   4932:     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
                   4933:     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
                   4934: 
                   4935:     func_dirname "$output" "/" ""
                   4936:     output_objdir="$func_dirname_result$objdir"
                   4937:     # Create the object directory.
                   4938:     func_mkdir_p "$output_objdir"
                   4939: 
                   4940:     # Determine the type of output
                   4941:     case $output in
                   4942:     "")
                   4943:       func_fatal_help "you must specify an output file"
                   4944:       ;;
                   4945:     *.$libext) linkmode=oldlib ;;
                   4946:     *.lo | *.$objext) linkmode=obj ;;
                   4947:     *.la) linkmode=lib ;;
                   4948:     *) linkmode=prog ;; # Anything else should be a program.
                   4949:     esac
                   4950: 
                   4951:     specialdeplibs=
                   4952: 
                   4953:     libs=
                   4954:     # Find all interdependent deplibs by searching for libraries
                   4955:     # that are linked more than once (e.g. -la -lb -la)
                   4956:     for deplib in $deplibs; do
                   4957:       if $opt_duplicate_deps ; then
                   4958:        case "$libs " in
                   4959:        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
                   4960:        esac
                   4961:       fi
                   4962:       libs="$libs $deplib"
                   4963:     done
                   4964: 
                   4965:     if test "$linkmode" = lib; then
                   4966:       libs="$predeps $libs $compiler_lib_search_path $postdeps"
                   4967: 
                   4968:       # Compute libraries that are listed more than once in $predeps
                   4969:       # $postdeps and mark them as special (i.e., whose duplicates are
                   4970:       # not to be eliminated).
                   4971:       pre_post_deps=
                   4972:       if $opt_duplicate_compiler_generated_deps; then
                   4973:        for pre_post_dep in $predeps $postdeps; do
                   4974:          case "$pre_post_deps " in
                   4975:          *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
                   4976:          esac
                   4977:          pre_post_deps="$pre_post_deps $pre_post_dep"
                   4978:        done
                   4979:       fi
                   4980:       pre_post_deps=
                   4981:     fi
                   4982: 
                   4983:     deplibs=
                   4984:     newdependency_libs=
                   4985:     newlib_search_path=
                   4986:     need_relink=no # whether we're linking any uninstalled libtool libraries
                   4987:     notinst_deplibs= # not-installed libtool libraries
                   4988:     notinst_path= # paths that contain not-installed libtool libraries
                   4989: 
                   4990:     case $linkmode in
                   4991:     lib)
                   4992:        passes="conv dlpreopen link"
                   4993:        for file in $dlfiles $dlprefiles; do
                   4994:          case $file in
                   4995:          *.la) ;;
                   4996:          *)
                   4997:            func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
                   4998:            ;;
                   4999:          esac
                   5000:        done
                   5001:        ;;
                   5002:     prog)
                   5003:        compile_deplibs=
                   5004:        finalize_deplibs=
                   5005:        alldeplibs=no
                   5006:        newdlfiles=
                   5007:        newdlprefiles=
                   5008:        passes="conv scan dlopen dlpreopen link"
                   5009:        ;;
                   5010:     *)  passes="conv"
                   5011:        ;;
                   5012:     esac
                   5013: 
                   5014:     for pass in $passes; do
                   5015:       # The preopen pass in lib mode reverses $deplibs; put it back here
                   5016:       # so that -L comes before libs that need it for instance...
                   5017:       if test "$linkmode,$pass" = "lib,link"; then
                   5018:        ## FIXME: Find the place where the list is rebuilt in the wrong
                   5019:        ##        order, and fix it there properly
                   5020:         tmp_deplibs=
                   5021:        for deplib in $deplibs; do
                   5022:          tmp_deplibs="$deplib $tmp_deplibs"
                   5023:        done
                   5024:        deplibs="$tmp_deplibs"
                   5025:       fi
                   5026: 
                   5027:       if test "$linkmode,$pass" = "lib,link" ||
                   5028:         test "$linkmode,$pass" = "prog,scan"; then
                   5029:        libs="$deplibs"
                   5030:        deplibs=
                   5031:       fi
                   5032:       if test "$linkmode" = prog; then
                   5033:        case $pass in
                   5034:        dlopen) libs="$dlfiles" ;;
                   5035:        dlpreopen) libs="$dlprefiles" ;;
                   5036:        link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
                   5037:        esac
                   5038:       fi
                   5039:       if test "$linkmode,$pass" = "lib,dlpreopen"; then
                   5040:        # Collect and forward deplibs of preopened libtool libs
                   5041:        for lib in $dlprefiles; do
                   5042:          # Ignore non-libtool-libs
                   5043:          dependency_libs=
                   5044:          case $lib in
                   5045:          *.la) func_source "$lib" ;;
                   5046:          esac
                   5047: 
                   5048:          # Collect preopened libtool deplibs, except any this library
                   5049:          # has declared as weak libs
                   5050:          for deplib in $dependency_libs; do
                   5051:             deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
                   5052:            case " $weak_libs " in
                   5053:            *" $deplib_base "*) ;;
                   5054:            *) deplibs="$deplibs $deplib" ;;
                   5055:            esac
                   5056:          done
                   5057:        done
                   5058:        libs="$dlprefiles"
                   5059:       fi
                   5060:       if test "$pass" = dlopen; then
                   5061:        # Collect dlpreopened libraries
                   5062:        save_deplibs="$deplibs"
                   5063:        deplibs=
                   5064:       fi
                   5065: 
                   5066:       for deplib in $libs; do
                   5067:        lib=
                   5068:        found=no
                   5069:        case $deplib in
                   5070:        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
                   5071:          if test "$linkmode,$pass" = "prog,link"; then
                   5072:            compile_deplibs="$deplib $compile_deplibs"
                   5073:            finalize_deplibs="$deplib $finalize_deplibs"
                   5074:          else
                   5075:            compiler_flags="$compiler_flags $deplib"
                   5076:            if test "$linkmode" = lib ; then
                   5077:                case "$new_inherited_linker_flags " in
                   5078:                    *" $deplib "*) ;;
                   5079:                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
                   5080:                esac
                   5081:            fi
                   5082:          fi
                   5083:          continue
                   5084:          ;;
                   5085:        -l*)
                   5086:          if test "$linkmode" != lib && test "$linkmode" != prog; then
                   5087:            func_warning "\`-l' is ignored for archives/objects"
                   5088:            continue
                   5089:          fi
                   5090:          func_stripname '-l' '' "$deplib"
                   5091:          name=$func_stripname_result
                   5092:          if test "$linkmode" = lib; then
                   5093:            searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
                   5094:          else
                   5095:            searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
                   5096:          fi
                   5097:          for searchdir in $searchdirs; do
                   5098:            for search_ext in .la $std_shrext .so .a; do
                   5099:              # Search the libtool library
                   5100:              lib="$searchdir/lib${name}${search_ext}"
                   5101:              if test -f "$lib"; then
                   5102:                if test "$search_ext" = ".la"; then
                   5103:                  found=yes
                   5104:                else
                   5105:                  found=no
                   5106:                fi
                   5107:                break 2
                   5108:              fi
                   5109:            done
                   5110:          done
                   5111:          if test "$found" != yes; then
                   5112:            # deplib doesn't seem to be a libtool library
                   5113:            if test "$linkmode,$pass" = "prog,link"; then
                   5114:              compile_deplibs="$deplib $compile_deplibs"
                   5115:              finalize_deplibs="$deplib $finalize_deplibs"
                   5116:            else
                   5117:              deplibs="$deplib $deplibs"
                   5118:              test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
                   5119:            fi
                   5120:            continue
                   5121:          else # deplib is a libtool library
                   5122:            # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
                   5123:            # We need to do some special things here, and not later.
                   5124:            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                   5125:              case " $predeps $postdeps " in
                   5126:              *" $deplib "*)
                   5127:                if func_lalib_p "$lib"; then
                   5128:                  library_names=
                   5129:                  old_library=
                   5130:                  func_source "$lib"
                   5131:                  for l in $old_library $library_names; do
                   5132:                    ll="$l"
                   5133:                  done
                   5134:                  if test "X$ll" = "X$old_library" ; then # only static version available
                   5135:                    found=no
                   5136:                    func_dirname "$lib" "" "."
                   5137:                    ladir="$func_dirname_result"
                   5138:                    lib=$ladir/$old_library
                   5139:                    if test "$linkmode,$pass" = "prog,link"; then
                   5140:                      compile_deplibs="$deplib $compile_deplibs"
                   5141:                      finalize_deplibs="$deplib $finalize_deplibs"
                   5142:                    else
                   5143:                      deplibs="$deplib $deplibs"
                   5144:                      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
                   5145:                    fi
                   5146:                    continue
                   5147:                  fi
                   5148:                fi
                   5149:                ;;
                   5150:              *) ;;
                   5151:              esac
                   5152:            fi
                   5153:          fi
                   5154:          ;; # -l
                   5155:        *.ltframework)
                   5156:          if test "$linkmode,$pass" = "prog,link"; then
                   5157:            compile_deplibs="$deplib $compile_deplibs"
                   5158:            finalize_deplibs="$deplib $finalize_deplibs"
                   5159:          else
                   5160:            deplibs="$deplib $deplibs"
                   5161:            if test "$linkmode" = lib ; then
                   5162:                case "$new_inherited_linker_flags " in
                   5163:                    *" $deplib "*) ;;
                   5164:                    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
                   5165:                esac
                   5166:            fi
                   5167:          fi
                   5168:          continue
                   5169:          ;;
                   5170:        -L*)
                   5171:          case $linkmode in
                   5172:          lib)
                   5173:            deplibs="$deplib $deplibs"
                   5174:            test "$pass" = conv && continue
                   5175:            newdependency_libs="$deplib $newdependency_libs"
                   5176:            func_stripname '-L' '' "$deplib"
                   5177:            newlib_search_path="$newlib_search_path $func_stripname_result"
                   5178:            ;;
                   5179:          prog)
                   5180:            if test "$pass" = conv; then
                   5181:              deplibs="$deplib $deplibs"
                   5182:              continue
                   5183:            fi
                   5184:            if test "$pass" = scan; then
                   5185:              deplibs="$deplib $deplibs"
                   5186:            else
                   5187:              compile_deplibs="$deplib $compile_deplibs"
                   5188:              finalize_deplibs="$deplib $finalize_deplibs"
                   5189:            fi
                   5190:            func_stripname '-L' '' "$deplib"
                   5191:            newlib_search_path="$newlib_search_path $func_stripname_result"
                   5192:            ;;
                   5193:          *)
                   5194:            func_warning "\`-L' is ignored for archives/objects"
                   5195:            ;;
                   5196:          esac # linkmode
                   5197:          continue
                   5198:          ;; # -L
                   5199:        -R*)
                   5200:          if test "$pass" = link; then
                   5201:            func_stripname '-R' '' "$deplib"
                   5202:            dir=$func_stripname_result
                   5203:            # Make sure the xrpath contains only unique directories.
                   5204:            case "$xrpath " in
                   5205:            *" $dir "*) ;;
                   5206:            *) xrpath="$xrpath $dir" ;;
                   5207:            esac
                   5208:          fi
                   5209:          deplibs="$deplib $deplibs"
                   5210:          continue
                   5211:          ;;
                   5212:        *.la) lib="$deplib" ;;
                   5213:        *.$libext)
                   5214:          if test "$pass" = conv; then
                   5215:            deplibs="$deplib $deplibs"
                   5216:            continue
                   5217:          fi
                   5218:          case $linkmode in
                   5219:          lib)
                   5220:            # Linking convenience modules into shared libraries is allowed,
                   5221:            # but linking other static libraries is non-portable.
                   5222:            case " $dlpreconveniencelibs " in
                   5223:            *" $deplib "*) ;;
                   5224:            *)
                   5225:              valid_a_lib=no
                   5226:              case $deplibs_check_method in
                   5227:                match_pattern*)
                   5228:                  set dummy $deplibs_check_method; shift
                   5229:                  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
                   5230:                  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
                   5231:                    | $EGREP "$match_pattern_regex" > /dev/null; then
                   5232:                    valid_a_lib=yes
                   5233:                  fi
                   5234:                ;;
                   5235:                pass_all)
                   5236:                  valid_a_lib=yes
                   5237:                ;;
                   5238:              esac
                   5239:              if test "$valid_a_lib" != yes; then
                   5240:                $ECHO
                   5241:                $ECHO "*** Warning: Trying to link with static lib archive $deplib."
                   5242:                $ECHO "*** I have the capability to make that library automatically link in when"
                   5243:                $ECHO "*** you link to this library.  But I can only do this if you have a"
                   5244:                $ECHO "*** shared version of the library, which you do not appear to have"
                   5245:                $ECHO "*** because the file extensions .$libext of this argument makes me believe"
                   5246:                $ECHO "*** that it is just a static archive that I should not use here."
                   5247:              else
                   5248:                $ECHO
                   5249:                $ECHO "*** Warning: Linking the shared library $output against the"
                   5250:                $ECHO "*** static library $deplib is not portable!"
                   5251:                deplibs="$deplib $deplibs"
                   5252:              fi
                   5253:              ;;
                   5254:            esac
                   5255:            continue
                   5256:            ;;
                   5257:          prog)
                   5258:            if test "$pass" != link; then
                   5259:              deplibs="$deplib $deplibs"
                   5260:            else
                   5261:              compile_deplibs="$deplib $compile_deplibs"
                   5262:              finalize_deplibs="$deplib $finalize_deplibs"
                   5263:            fi
                   5264:            continue
                   5265:            ;;
                   5266:          esac # linkmode
                   5267:          ;; # *.$libext
                   5268:        *.lo | *.$objext)
                   5269:          if test "$pass" = conv; then
                   5270:            deplibs="$deplib $deplibs"
                   5271:          elif test "$linkmode" = prog; then
                   5272:            if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
                   5273:              # If there is no dlopen support or we're linking statically,
                   5274:              # we need to preload.
                   5275:              newdlprefiles="$newdlprefiles $deplib"
                   5276:              compile_deplibs="$deplib $compile_deplibs"
                   5277:              finalize_deplibs="$deplib $finalize_deplibs"
                   5278:            else
                   5279:              newdlfiles="$newdlfiles $deplib"
                   5280:            fi
                   5281:          fi
                   5282:          continue
                   5283:          ;;
                   5284:        %DEPLIBS%)
                   5285:          alldeplibs=yes
                   5286:          continue
                   5287:          ;;
                   5288:        esac # case $deplib
                   5289: 
                   5290:        if test "$found" = yes || test -f "$lib"; then :
                   5291:        else
                   5292:          func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
                   5293:        fi
                   5294: 
                   5295:        # Check to see that this really is a libtool archive.
                   5296:        func_lalib_unsafe_p "$lib" \
                   5297:          || func_fatal_error "\`$lib' is not a valid libtool archive"
                   5298: 
                   5299:        func_dirname "$lib" "" "."
                   5300:        ladir="$func_dirname_result"
                   5301: 
                   5302:        dlname=
                   5303:        dlopen=
                   5304:        dlpreopen=
                   5305:        libdir=
                   5306:        library_names=
                   5307:        old_library=
                   5308:        inherited_linker_flags=
                   5309:        # If the library was installed with an old release of libtool,
                   5310:        # it will not redefine variables installed, or shouldnotlink
                   5311:        installed=yes
                   5312:        shouldnotlink=no
                   5313:        avoidtemprpath=
                   5314: 
                   5315: 
                   5316:        # Read the .la file
                   5317:        func_source "$lib"
                   5318: 
                   5319:        # Convert "-framework foo" to "foo.ltframework"
                   5320:        if test -n "$inherited_linker_flags"; then
                   5321:          tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
                   5322:          for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
                   5323:            case " $new_inherited_linker_flags " in
                   5324:              *" $tmp_inherited_linker_flag "*) ;;
                   5325:              *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
                   5326:            esac
                   5327:          done
                   5328:        fi
                   5329:        dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
                   5330:        if test "$linkmode,$pass" = "lib,link" ||
                   5331:           test "$linkmode,$pass" = "prog,scan" ||
                   5332:           { test "$linkmode" != prog && test "$linkmode" != lib; }; then
                   5333:          test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
                   5334:          test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
                   5335:        fi
                   5336: 
                   5337:        if test "$pass" = conv; then
                   5338:          # Only check for convenience libraries
                   5339:          deplibs="$lib $deplibs"
                   5340:          if test -z "$libdir"; then
                   5341:            if test -z "$old_library"; then
                   5342:              func_fatal_error "cannot find name of link library for \`$lib'"
                   5343:            fi
                   5344:            # It is a libtool convenience library, so add in its objects.
                   5345:            convenience="$convenience $ladir/$objdir/$old_library"
                   5346:            old_convenience="$old_convenience $ladir/$objdir/$old_library"
                   5347:          elif test "$linkmode" != prog && test "$linkmode" != lib; then
                   5348:            func_fatal_error "\`$lib' is not a convenience library"
                   5349:          fi
                   5350:          tmp_libs=
                   5351:          for deplib in $dependency_libs; do
                   5352:            deplibs="$deplib $deplibs"
                   5353:            if $opt_duplicate_deps ; then
                   5354:              case "$tmp_libs " in
                   5355:              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
                   5356:              esac
                   5357:            fi
                   5358:            tmp_libs="$tmp_libs $deplib"
                   5359:          done
                   5360:          continue
                   5361:        fi # $pass = conv
                   5362: 
                   5363: 
                   5364:        # Get the name of the library we link against.
                   5365:        linklib=
                   5366:        for l in $old_library $library_names; do
                   5367:          linklib="$l"
                   5368:        done
                   5369:        if test -z "$linklib"; then
                   5370:          func_fatal_error "cannot find name of link library for \`$lib'"
                   5371:        fi
                   5372: 
                   5373:        # This library was specified with -dlopen.
                   5374:        if test "$pass" = dlopen; then
                   5375:          if test -z "$libdir"; then
                   5376:            func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
                   5377:          fi
                   5378:          if test -z "$dlname" ||
                   5379:             test "$dlopen_support" != yes ||
                   5380:             test "$build_libtool_libs" = no; then
                   5381:            # If there is no dlname, no dlopen support or we're linking
                   5382:            # statically, we need to preload.  We also need to preload any
                   5383:            # dependent libraries so libltdl's deplib preloader doesn't
                   5384:            # bomb out in the load deplibs phase.
                   5385:            dlprefiles="$dlprefiles $lib $dependency_libs"
                   5386:          else
                   5387:            newdlfiles="$newdlfiles $lib"
                   5388:          fi
                   5389:          continue
                   5390:        fi # $pass = dlopen
                   5391: 
                   5392:        # We need an absolute path.
                   5393:        case $ladir in
                   5394:        [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
                   5395:        *)
                   5396:          abs_ladir=`cd "$ladir" && pwd`
                   5397:          if test -z "$abs_ladir"; then
                   5398:            func_warning "cannot determine absolute directory name of \`$ladir'"
                   5399:            func_warning "passing it literally to the linker, although it might fail"
                   5400:            abs_ladir="$ladir"
                   5401:          fi
                   5402:          ;;
                   5403:        esac
                   5404:        func_basename "$lib"
                   5405:        laname="$func_basename_result"
                   5406: 
                   5407:        # Find the relevant object directory and library name.
                   5408:        if test "X$installed" = Xyes; then
                   5409:          if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
                   5410:            func_warning "library \`$lib' was moved."
                   5411:            dir="$ladir"
                   5412:            absdir="$abs_ladir"
                   5413:            libdir="$abs_ladir"
                   5414:          else
                   5415:            dir="$libdir"
                   5416:            absdir="$libdir"
                   5417:          fi
                   5418:          test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
                   5419:        else
                   5420:          if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
                   5421:            dir="$ladir"
                   5422:            absdir="$abs_ladir"
                   5423:            # Remove this search path later
                   5424:            notinst_path="$notinst_path $abs_ladir"
                   5425:          else
                   5426:            dir="$ladir/$objdir"
                   5427:            absdir="$abs_ladir/$objdir"
                   5428:            # Remove this search path later
                   5429:            notinst_path="$notinst_path $abs_ladir"
                   5430:          fi
                   5431:        fi # $installed = yes
                   5432:        func_stripname 'lib' '.la' "$laname"
                   5433:        name=$func_stripname_result
                   5434: 
                   5435:        # This library was specified with -dlpreopen.
                   5436:        if test "$pass" = dlpreopen; then
                   5437:          if test -z "$libdir" && test "$linkmode" = prog; then
                   5438:            func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
                   5439:          fi
                   5440:          # Prefer using a static library (so that no silly _DYNAMIC symbols
                   5441:          # are required to link).
                   5442:          if test -n "$old_library"; then
                   5443:            newdlprefiles="$newdlprefiles $dir/$old_library"
                   5444:            # Keep a list of preopened convenience libraries to check
                   5445:            # that they are being used correctly in the link pass.
                   5446:            test -z "$libdir" && \
                   5447:                dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
                   5448:          # Otherwise, use the dlname, so that lt_dlopen finds it.
                   5449:          elif test -n "$dlname"; then
                   5450:            newdlprefiles="$newdlprefiles $dir/$dlname"
                   5451:          else
                   5452:            newdlprefiles="$newdlprefiles $dir/$linklib"
                   5453:          fi
                   5454:        fi # $pass = dlpreopen
                   5455: 
                   5456:        if test -z "$libdir"; then
                   5457:          # Link the convenience library
                   5458:          if test "$linkmode" = lib; then
                   5459:            deplibs="$dir/$old_library $deplibs"
                   5460:          elif test "$linkmode,$pass" = "prog,link"; then
                   5461:            compile_deplibs="$dir/$old_library $compile_deplibs"
                   5462:            finalize_deplibs="$dir/$old_library $finalize_deplibs"
                   5463:          else
                   5464:            deplibs="$lib $deplibs" # used for prog,scan pass
                   5465:          fi
                   5466:          continue
                   5467:        fi
                   5468: 
                   5469: 
                   5470:        if test "$linkmode" = prog && test "$pass" != link; then
                   5471:          newlib_search_path="$newlib_search_path $ladir"
                   5472:          deplibs="$lib $deplibs"
                   5473: 
                   5474:          linkalldeplibs=no
                   5475:          if test "$link_all_deplibs" != no || test -z "$library_names" ||
                   5476:             test "$build_libtool_libs" = no; then
                   5477:            linkalldeplibs=yes
                   5478:          fi
                   5479: 
                   5480:          tmp_libs=
                   5481:          for deplib in $dependency_libs; do
                   5482:            case $deplib in
                   5483:            -L*) func_stripname '-L' '' "$deplib"
                   5484:                 newlib_search_path="$newlib_search_path $func_stripname_result"
                   5485:                 ;;
                   5486:            esac
                   5487:            # Need to link against all dependency_libs?
                   5488:            if test "$linkalldeplibs" = yes; then
                   5489:              deplibs="$deplib $deplibs"
                   5490:            else
                   5491:              # Need to hardcode shared library paths
                   5492:              # or/and link against static libraries
                   5493:              newdependency_libs="$deplib $newdependency_libs"
                   5494:            fi
                   5495:            if $opt_duplicate_deps ; then
                   5496:              case "$tmp_libs " in
                   5497:              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
                   5498:              esac
                   5499:            fi
                   5500:            tmp_libs="$tmp_libs $deplib"
                   5501:          done # for deplib
                   5502:          continue
                   5503:        fi # $linkmode = prog...
                   5504: 
                   5505:        if test "$linkmode,$pass" = "prog,link"; then
                   5506:          if test -n "$library_names" &&
                   5507:             { { test "$prefer_static_libs" = no ||
                   5508:                 test "$prefer_static_libs,$installed" = "built,yes"; } ||
                   5509:               test -z "$old_library"; }; then
                   5510:            # We need to hardcode the library path
                   5511:            if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
                   5512:              # Make sure the rpath contains only unique directories.
                   5513:              case "$temp_rpath:" in
                   5514:              *"$absdir:"*) ;;
                   5515:              *) temp_rpath="$temp_rpath$absdir:" ;;
                   5516:              esac
                   5517:            fi
                   5518: 
                   5519:            # Hardcode the library path.
                   5520:            # Skip directories that are in the system default run-time
                   5521:            # search path.
                   5522:            case " $sys_lib_dlsearch_path " in
                   5523:            *" $absdir "*) ;;
                   5524:            *)
                   5525:              case "$compile_rpath " in
                   5526:              *" $absdir "*) ;;
                   5527:              *) compile_rpath="$compile_rpath $absdir"
                   5528:              esac
                   5529:              ;;
                   5530:            esac
                   5531:            case " $sys_lib_dlsearch_path " in
                   5532:            *" $libdir "*) ;;
                   5533:            *)
                   5534:              case "$finalize_rpath " in
                   5535:              *" $libdir "*) ;;
                   5536:              *) finalize_rpath="$finalize_rpath $libdir"
                   5537:              esac
                   5538:              ;;
                   5539:            esac
                   5540:          fi # $linkmode,$pass = prog,link...
                   5541: 
                   5542:          if test "$alldeplibs" = yes &&
                   5543:             { test "$deplibs_check_method" = pass_all ||
                   5544:               { test "$build_libtool_libs" = yes &&
                   5545:                 test -n "$library_names"; }; }; then
                   5546:            # We only need to search for static libraries
                   5547:            continue
                   5548:          fi
                   5549:        fi
                   5550: 
                   5551:        link_static=no # Whether the deplib will be linked statically
                   5552:        use_static_libs=$prefer_static_libs
                   5553:        if test "$use_static_libs" = built && test "$installed" = yes; then
                   5554:          use_static_libs=no
                   5555:        fi
                   5556:        if test -n "$library_names" &&
                   5557:           { test "$use_static_libs" = no || test -z "$old_library"; }; then
                   5558:          case $host in
                   5559:          *cygwin* | *mingw* | *cegcc*)
                   5560:              # No point in relinking DLLs because paths are not encoded
                   5561:              notinst_deplibs="$notinst_deplibs $lib"
                   5562:              need_relink=no
                   5563:            ;;
                   5564:          *)
                   5565:            if test "$installed" = no; then
                   5566:              notinst_deplibs="$notinst_deplibs $lib"
                   5567:              need_relink=yes
                   5568:            fi
                   5569:            ;;
                   5570:          esac
                   5571:          # This is a shared library
                   5572: 
                   5573:          # Warn about portability, can't link against -module's on some
                   5574:          # systems (darwin).  Don't bleat about dlopened modules though!
                   5575:          dlopenmodule=""
                   5576:          for dlpremoduletest in $dlprefiles; do
                   5577:            if test "X$dlpremoduletest" = "X$lib"; then
                   5578:              dlopenmodule="$dlpremoduletest"
                   5579:              break
                   5580:            fi
                   5581:          done
                   5582:          if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
                   5583:            $ECHO
                   5584:            if test "$linkmode" = prog; then
                   5585:              $ECHO "*** Warning: Linking the executable $output against the loadable module"
                   5586:            else
                   5587:              $ECHO "*** Warning: Linking the shared library $output against the loadable module"
                   5588:            fi
                   5589:            $ECHO "*** $linklib is not portable!"
                   5590:          fi
                   5591:          if test "$linkmode" = lib &&
                   5592:             test "$hardcode_into_libs" = yes; then
                   5593:            # Hardcode the library path.
                   5594:            # Skip directories that are in the system default run-time
                   5595:            # search path.
                   5596:            case " $sys_lib_dlsearch_path " in
                   5597:            *" $absdir "*) ;;
                   5598:            *)
                   5599:              case "$compile_rpath " in
                   5600:              *" $absdir "*) ;;
                   5601:              *) compile_rpath="$compile_rpath $absdir"
                   5602:              esac
                   5603:              ;;
                   5604:            esac
                   5605:            case " $sys_lib_dlsearch_path " in
                   5606:            *" $libdir "*) ;;
                   5607:            *)
                   5608:              case "$finalize_rpath " in
                   5609:              *" $libdir "*) ;;
                   5610:              *) finalize_rpath="$finalize_rpath $libdir"
                   5611:              esac
                   5612:              ;;
                   5613:            esac
                   5614:          fi
                   5615: 
                   5616:          if test -n "$old_archive_from_expsyms_cmds"; then
                   5617:            # figure out the soname
                   5618:            set dummy $library_names
                   5619:            shift
                   5620:            realname="$1"
                   5621:            shift
                   5622:            libname=`eval "\\$ECHO \"$libname_spec\""`
                   5623:            # use dlname if we got it. it's perfectly good, no?
                   5624:            if test -n "$dlname"; then
                   5625:              soname="$dlname"
                   5626:            elif test -n "$soname_spec"; then
                   5627:              # bleh windows
                   5628:              case $host in
                   5629:              *cygwin* | mingw* | *cegcc*)
                   5630:                func_arith $current - $age
                   5631:                major=$func_arith_result
                   5632:                versuffix="-$major"
                   5633:                ;;
                   5634:              esac
                   5635:              eval soname=\"$soname_spec\"
                   5636:            else
                   5637:              soname="$realname"
                   5638:            fi
                   5639: 
                   5640:            # Make a new name for the extract_expsyms_cmds to use
                   5641:            soroot="$soname"
                   5642:            func_basename "$soroot"
                   5643:            soname="$func_basename_result"
                   5644:            func_stripname 'lib' '.dll' "$soname"
                   5645:            newlib=libimp-$func_stripname_result.a
                   5646: 
                   5647:            # If the library has no export list, then create one now
                   5648:            if test -f "$output_objdir/$soname-def"; then :
                   5649:            else
                   5650:              func_verbose "extracting exported symbol list from \`$soname'"
                   5651:              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
                   5652:            fi
                   5653: 
                   5654:            # Create $newlib
                   5655:            if test -f "$output_objdir/$newlib"; then :; else
                   5656:              func_verbose "generating import library for \`$soname'"
                   5657:              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
                   5658:            fi
                   5659:            # make sure the library variables are pointing to the new library
                   5660:            dir=$output_objdir
                   5661:            linklib=$newlib
                   5662:          fi # test -n "$old_archive_from_expsyms_cmds"
                   5663: 
                   5664:          if test "$linkmode" = prog || test "$mode" != relink; then
                   5665:            add_shlibpath=
                   5666:            add_dir=
                   5667:            add=
                   5668:            lib_linked=yes
                   5669:            case $hardcode_action in
                   5670:            immediate | unsupported)
                   5671:              if test "$hardcode_direct" = no; then
                   5672:                add="$dir/$linklib"
                   5673:                case $host in
                   5674:                  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
                   5675:                  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
                   5676:                  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
                   5677:                    *-*-unixware7*) add_dir="-L$dir" ;;
                   5678:                  *-*-darwin* )
                   5679:                    # if the lib is a (non-dlopened) module then we can not
                   5680:                    # link against it, someone is ignoring the earlier warnings
                   5681:                    if /usr/bin/file -L $add 2> /dev/null |
                   5682:                         $GREP ": [^:]* bundle" >/dev/null ; then
                   5683:                      if test "X$dlopenmodule" != "X$lib"; then
                   5684:                        $ECHO "*** Warning: lib $linklib is a module, not a shared library"
                   5685:                        if test -z "$old_library" ; then
                   5686:                          $ECHO
                   5687:                          $ECHO "*** And there doesn't seem to be a static archive available"
                   5688:                          $ECHO "*** The link will probably fail, sorry"
                   5689:                        else
                   5690:                          add="$dir/$old_library"
                   5691:                        fi
                   5692:                      elif test -n "$old_library"; then
                   5693:                        add="$dir/$old_library"
                   5694:                      fi
                   5695:                    fi
                   5696:                esac
                   5697:              elif test "$hardcode_minus_L" = no; then
                   5698:                case $host in
                   5699:                *-*-sunos*) add_shlibpath="$dir" ;;
                   5700:                esac
                   5701:                add_dir="-L$dir"
                   5702:                add="-l$name"
                   5703:              elif test "$hardcode_shlibpath_var" = no; then
                   5704:                add_shlibpath="$dir"
                   5705:                add="-l$name"
                   5706:              else
                   5707:                lib_linked=no
                   5708:              fi
                   5709:              ;;
                   5710:            relink)
                   5711:              if test "$hardcode_direct" = yes &&
                   5712:                 test "$hardcode_direct_absolute" = no; then
                   5713:                add="$dir/$linklib"
                   5714:              elif test "$hardcode_minus_L" = yes; then
                   5715:                add_dir="-L$dir"
                   5716:                # Try looking first in the location we're being installed to.
                   5717:                if test -n "$inst_prefix_dir"; then
                   5718:                  case $libdir in
                   5719:                    [\\/]*)
                   5720:                      add_dir="$add_dir -L$inst_prefix_dir$libdir"
                   5721:                      ;;
                   5722:                  esac
                   5723:                fi
                   5724:                add="-l$name"
                   5725:              elif test "$hardcode_shlibpath_var" = yes; then
                   5726:                add_shlibpath="$dir"
                   5727:                add="-l$name"
                   5728:              else
                   5729:                lib_linked=no
                   5730:              fi
                   5731:              ;;
                   5732:            *) lib_linked=no ;;
                   5733:            esac
                   5734: 
                   5735:            if test "$lib_linked" != yes; then
                   5736:              func_fatal_configuration "unsupported hardcode properties"
                   5737:            fi
                   5738: 
                   5739:            if test -n "$add_shlibpath"; then
                   5740:              case :$compile_shlibpath: in
                   5741:              *":$add_shlibpath:"*) ;;
                   5742:              *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
                   5743:              esac
                   5744:            fi
                   5745:            if test "$linkmode" = prog; then
                   5746:              test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
                   5747:              test -n "$add" && compile_deplibs="$add $compile_deplibs"
                   5748:            else
                   5749:              test -n "$add_dir" && deplibs="$add_dir $deplibs"
                   5750:              test -n "$add" && deplibs="$add $deplibs"
                   5751:              if test "$hardcode_direct" != yes &&
                   5752:                 test "$hardcode_minus_L" != yes &&
                   5753:                 test "$hardcode_shlibpath_var" = yes; then
                   5754:                case :$finalize_shlibpath: in
                   5755:                *":$libdir:"*) ;;
                   5756:                *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
                   5757:                esac
                   5758:              fi
                   5759:            fi
                   5760:          fi
                   5761: 
                   5762:          if test "$linkmode" = prog || test "$mode" = relink; then
                   5763:            add_shlibpath=
                   5764:            add_dir=
                   5765:            add=
                   5766:            # Finalize command for both is simple: just hardcode it.
                   5767:            if test "$hardcode_direct" = yes &&
                   5768:               test "$hardcode_direct_absolute" = no; then
                   5769:              add="$libdir/$linklib"
                   5770:            elif test "$hardcode_minus_L" = yes; then
                   5771:              add_dir="-L$libdir"
                   5772:              add="-l$name"
                   5773:            elif test "$hardcode_shlibpath_var" = yes; then
                   5774:              case :$finalize_shlibpath: in
                   5775:              *":$libdir:"*) ;;
                   5776:              *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
                   5777:              esac
                   5778:              add="-l$name"
                   5779:            elif test "$hardcode_automatic" = yes; then
                   5780:              if test -n "$inst_prefix_dir" &&
                   5781:                 test -f "$inst_prefix_dir$libdir/$linklib" ; then
                   5782:                add="$inst_prefix_dir$libdir/$linklib"
                   5783:              else
                   5784:                add="$libdir/$linklib"
                   5785:              fi
                   5786:            else
                   5787:              # We cannot seem to hardcode it, guess we'll fake it.
                   5788:              add_dir="-L$libdir"
                   5789:              # Try looking first in the location we're being installed to.
                   5790:              if test -n "$inst_prefix_dir"; then
                   5791:                case $libdir in
                   5792:                  [\\/]*)
                   5793:                    add_dir="$add_dir -L$inst_prefix_dir$libdir"
                   5794:                    ;;
                   5795:                esac
                   5796:              fi
                   5797:              add="-l$name"
                   5798:            fi
                   5799: 
                   5800:            if test "$linkmode" = prog; then
                   5801:              test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
                   5802:              test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
                   5803:            else
                   5804:              test -n "$add_dir" && deplibs="$add_dir $deplibs"
                   5805:              test -n "$add" && deplibs="$add $deplibs"
                   5806:            fi
                   5807:          fi
                   5808:        elif test "$linkmode" = prog; then
                   5809:          # Here we assume that one of hardcode_direct or hardcode_minus_L
                   5810:          # is not unsupported.  This is valid on all known static and
                   5811:          # shared platforms.
                   5812:          if test "$hardcode_direct" != unsupported; then
                   5813:            test -n "$old_library" && linklib="$old_library"
                   5814:            compile_deplibs="$dir/$linklib $compile_deplibs"
                   5815:            finalize_deplibs="$dir/$linklib $finalize_deplibs"
                   5816:          else
                   5817:            compile_deplibs="-l$name -L$dir $compile_deplibs"
                   5818:            finalize_deplibs="-l$name -L$dir $finalize_deplibs"
                   5819:          fi
                   5820:        elif test "$build_libtool_libs" = yes; then
                   5821:          # Not a shared library
                   5822:          if test "$deplibs_check_method" != pass_all; then
                   5823:            # We're trying link a shared library against a static one
                   5824:            # but the system doesn't support it.
                   5825: 
                   5826:            # Just print a warning and add the library to dependency_libs so
                   5827:            # that the program can be linked against the static library.
                   5828:            $ECHO
                   5829:            $ECHO "*** Warning: This system can not link to static lib archive $lib."
                   5830:            $ECHO "*** I have the capability to make that library automatically link in when"
                   5831:            $ECHO "*** you link to this library.  But I can only do this if you have a"
                   5832:            $ECHO "*** shared version of the library, which you do not appear to have."
                   5833:            if test "$module" = yes; then
                   5834:              $ECHO "*** But as you try to build a module library, libtool will still create "
                   5835:              $ECHO "*** a static module, that should work as long as the dlopening application"
                   5836:              $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
                   5837:              if test -z "$global_symbol_pipe"; then
                   5838:                $ECHO
                   5839:                $ECHO "*** However, this would only work if libtool was able to extract symbol"
                   5840:                $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
                   5841:                $ECHO "*** not find such a program.  So, this module is probably useless."
                   5842:                $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
                   5843:              fi
                   5844:              if test "$build_old_libs" = no; then
                   5845:                build_libtool_libs=module
                   5846:                build_old_libs=yes
                   5847:              else
                   5848:                build_libtool_libs=no
                   5849:              fi
                   5850:            fi
                   5851:          else
                   5852:            deplibs="$dir/$old_library $deplibs"
                   5853:            link_static=yes
                   5854:          fi
                   5855:        fi # link shared/static library?
                   5856: 
                   5857:        if test "$linkmode" = lib; then
                   5858:          if test -n "$dependency_libs" &&
                   5859:             { test "$hardcode_into_libs" != yes ||
                   5860:               test "$build_old_libs" = yes ||
                   5861:               test "$link_static" = yes; }; then
                   5862:            # Extract -R from dependency_libs
                   5863:            temp_deplibs=
                   5864:            for libdir in $dependency_libs; do
                   5865:              case $libdir in
                   5866:              -R*) func_stripname '-R' '' "$libdir"
                   5867:                   temp_xrpath=$func_stripname_result
                   5868:                   case " $xrpath " in
                   5869:                   *" $temp_xrpath "*) ;;
                   5870:                   *) xrpath="$xrpath $temp_xrpath";;
                   5871:                   esac;;
                   5872:              *) temp_deplibs="$temp_deplibs $libdir";;
                   5873:              esac
                   5874:            done
                   5875:            dependency_libs="$temp_deplibs"
                   5876:          fi
                   5877: 
                   5878:          newlib_search_path="$newlib_search_path $absdir"
                   5879:          # Link against this library
                   5880:          test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
                   5881:          # ... and its dependency_libs
                   5882:          tmp_libs=
                   5883:          for deplib in $dependency_libs; do
                   5884:            newdependency_libs="$deplib $newdependency_libs"
                   5885:            if $opt_duplicate_deps ; then
                   5886:              case "$tmp_libs " in
                   5887:              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
                   5888:              esac
                   5889:            fi
                   5890:            tmp_libs="$tmp_libs $deplib"
                   5891:          done
                   5892: 
                   5893:          if test "$link_all_deplibs" != no; then
                   5894:            # Add the search paths of all dependency libraries
                   5895:            for deplib in $dependency_libs; do
                   5896:              case $deplib in
                   5897:              -L*) path="$deplib" ;;
                   5898:              *.la)
                   5899:                func_dirname "$deplib" "" "."
                   5900:                dir="$func_dirname_result"
                   5901:                # We need an absolute path.
                   5902:                case $dir in
                   5903:                [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
                   5904:                *)
                   5905:                  absdir=`cd "$dir" && pwd`
                   5906:                  if test -z "$absdir"; then
                   5907:                    func_warning "cannot determine absolute directory name of \`$dir'"
                   5908:                    absdir="$dir"
                   5909:                  fi
                   5910:                  ;;
                   5911:                esac
                   5912:                if $GREP "^installed=no" $deplib > /dev/null; then
                   5913:                case $host in
                   5914:                *-*-darwin*)
                   5915:                  depdepl=
                   5916:                  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
                   5917:                  if test -n "$deplibrary_names" ; then
                   5918:                    for tmp in $deplibrary_names ; do
                   5919:                      depdepl=$tmp
                   5920:                    done
                   5921:                    if test -f "$absdir/$objdir/$depdepl" ; then
                   5922:                      depdepl="$absdir/$objdir/$depdepl"
                   5923:                      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                   5924:                       if test -z "$darwin_install_name"; then
                   5925:                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                   5926:                       fi
                   5927:                      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
                   5928:                      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
                   5929:                      path=
                   5930:                    fi
                   5931:                  fi
                   5932:                  ;;
                   5933:                *)
                   5934:                  path="-L$absdir/$objdir"
                   5935:                  ;;
                   5936:                esac
                   5937:                else
                   5938:                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                   5939:                  test -z "$libdir" && \
                   5940:                    func_fatal_error "\`$deplib' is not a valid libtool archive"
                   5941:                  test "$absdir" != "$libdir" && \
                   5942:                    func_warning "\`$deplib' seems to be moved"
                   5943: 
                   5944:                  path="-L$absdir"
                   5945:                fi
                   5946:                ;;
                   5947:              esac
                   5948:              case " $deplibs " in
                   5949:              *" $path "*) ;;
                   5950:              *) deplibs="$path $deplibs" ;;
                   5951:              esac
                   5952:            done
                   5953:          fi # link_all_deplibs != no
                   5954:        fi # linkmode = lib
                   5955:       done # for deplib in $libs
                   5956:       if test "$pass" = link; then
                   5957:        if test "$linkmode" = "prog"; then
                   5958:          compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
                   5959:          finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
                   5960:        else
                   5961:          compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
                   5962:        fi
                   5963:       fi
                   5964:       dependency_libs="$newdependency_libs"
                   5965:       if test "$pass" = dlpreopen; then
                   5966:        # Link the dlpreopened libraries before other libraries
                   5967:        for deplib in $save_deplibs; do
                   5968:          deplibs="$deplib $deplibs"
                   5969:        done
                   5970:       fi
                   5971:       if test "$pass" != dlopen; then
                   5972:        if test "$pass" != conv; then
                   5973:          # Make sure lib_search_path contains only unique directories.
                   5974:          lib_search_path=
                   5975:          for dir in $newlib_search_path; do
                   5976:            case "$lib_search_path " in
                   5977:            *" $dir "*) ;;
                   5978:            *) lib_search_path="$lib_search_path $dir" ;;
                   5979:            esac
                   5980:          done
                   5981:          newlib_search_path=
                   5982:        fi
                   5983: 
                   5984:        if test "$linkmode,$pass" != "prog,link"; then
                   5985:          vars="deplibs"
                   5986:        else
                   5987:          vars="compile_deplibs finalize_deplibs"
                   5988:        fi
                   5989:        for var in $vars dependency_libs; do
                   5990:          # Add libraries to $var in reverse order
                   5991:          eval tmp_libs=\"\$$var\"
                   5992:          new_libs=
                   5993:          for deplib in $tmp_libs; do
                   5994:            # FIXME: Pedantically, this is the right thing to do, so
                   5995:            #        that some nasty dependency loop isn't accidentally
                   5996:            #        broken:
                   5997:            #new_libs="$deplib $new_libs"
                   5998:            # Pragmatically, this seems to cause very few problems in
                   5999:            # practice:
                   6000:            case $deplib in
                   6001:            -L*) new_libs="$deplib $new_libs" ;;
                   6002:            -R*) ;;
                   6003:            *)
                   6004:              # And here is the reason: when a library appears more
                   6005:              # than once as an explicit dependence of a library, or
                   6006:              # is implicitly linked in more than once by the
                   6007:              # compiler, it is considered special, and multiple
                   6008:              # occurrences thereof are not removed.  Compare this
                   6009:              # with having the same library being listed as a
                   6010:              # dependency of multiple other libraries: in this case,
                   6011:              # we know (pedantically, we assume) the library does not
                   6012:              # need to be listed more than once, so we keep only the
                   6013:              # last copy.  This is not always right, but it is rare
                   6014:              # enough that we require users that really mean to play
                   6015:              # such unportable linking tricks to link the library
                   6016:              # using -Wl,-lname, so that libtool does not consider it
                   6017:              # for duplicate removal.
                   6018:              case " $specialdeplibs " in
                   6019:              *" $deplib "*) new_libs="$deplib $new_libs" ;;
                   6020:              *)
                   6021:                case " $new_libs " in
                   6022:                *" $deplib "*) ;;
                   6023:                *) new_libs="$deplib $new_libs" ;;
                   6024:                esac
                   6025:                ;;
                   6026:              esac
                   6027:              ;;
                   6028:            esac
                   6029:          done
                   6030:          tmp_libs=
                   6031:          for deplib in $new_libs; do
                   6032:            case $deplib in
                   6033:            -L*)
                   6034:              case " $tmp_libs " in
                   6035:              *" $deplib "*) ;;
                   6036:              *) tmp_libs="$tmp_libs $deplib" ;;
                   6037:              esac
                   6038:              ;;
                   6039:            *) tmp_libs="$tmp_libs $deplib" ;;
                   6040:            esac
                   6041:          done
                   6042:          eval $var=\"$tmp_libs\"
                   6043:        done # for var
                   6044:       fi
                   6045:       # Last step: remove runtime libs from dependency_libs
                   6046:       # (they stay in deplibs)
                   6047:       tmp_libs=
                   6048:       for i in $dependency_libs ; do
                   6049:        case " $predeps $postdeps $compiler_lib_search_path " in
                   6050:        *" $i "*)
                   6051:          i=""
                   6052:          ;;
                   6053:        esac
                   6054:        if test -n "$i" ; then
                   6055:          tmp_libs="$tmp_libs $i"
                   6056:        fi
                   6057:       done
                   6058:       dependency_libs=$tmp_libs
                   6059:     done # for pass
                   6060:     if test "$linkmode" = prog; then
                   6061:       dlfiles="$newdlfiles"
                   6062:     fi
                   6063:     if test "$linkmode" = prog || test "$linkmode" = lib; then
                   6064:       dlprefiles="$newdlprefiles"
                   6065:     fi
                   6066: 
                   6067:     case $linkmode in
                   6068:     oldlib)
                   6069:       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
                   6070:        func_warning "\`-dlopen' is ignored for archives"
                   6071:       fi
                   6072: 
                   6073:       case " $deplibs" in
                   6074:       *\ -l* | *\ -L*)
                   6075:        func_warning "\`-l' and \`-L' are ignored for archives" ;;
                   6076:       esac
                   6077: 
                   6078:       test -n "$rpath" && \
                   6079:        func_warning "\`-rpath' is ignored for archives"
                   6080: 
                   6081:       test -n "$xrpath" && \
                   6082:        func_warning "\`-R' is ignored for archives"
                   6083: 
                   6084:       test -n "$vinfo" && \
                   6085:        func_warning "\`-version-info/-version-number' is ignored for archives"
                   6086: 
                   6087:       test -n "$release" && \
                   6088:        func_warning "\`-release' is ignored for archives"
                   6089: 
                   6090:       test -n "$export_symbols$export_symbols_regex" && \
                   6091:        func_warning "\`-export-symbols' is ignored for archives"
                   6092: 
                   6093:       # Now set the variables for building old libraries.
                   6094:       build_libtool_libs=no
                   6095:       oldlibs="$output"
                   6096:       objs="$objs$old_deplibs"
                   6097:       ;;
                   6098: 
                   6099:     lib)
                   6100:       # Make sure we only generate libraries of the form `libNAME.la'.
                   6101:       case $outputname in
                   6102:       lib*)
                   6103:        func_stripname 'lib' '.la' "$outputname"
                   6104:        name=$func_stripname_result
                   6105:        eval shared_ext=\"$shrext_cmds\"
                   6106:        eval libname=\"$libname_spec\"
                   6107:        ;;
                   6108:       *)
                   6109:        test "$module" = no && \
                   6110:          func_fatal_help "libtool library \`$output' must begin with \`lib'"
                   6111: 
                   6112:        if test "$need_lib_prefix" != no; then
                   6113:          # Add the "lib" prefix for modules if required
                   6114:          func_stripname '' '.la' "$outputname"
                   6115:          name=$func_stripname_result
                   6116:          eval shared_ext=\"$shrext_cmds\"
                   6117:          eval libname=\"$libname_spec\"
                   6118:        else
                   6119:          func_stripname '' '.la' "$outputname"
                   6120:          libname=$func_stripname_result
                   6121:        fi
                   6122:        ;;
                   6123:       esac
                   6124: 
                   6125:       if test -n "$objs"; then
                   6126:        if test "$deplibs_check_method" != pass_all; then
                   6127:          func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
                   6128:        else
                   6129:          $ECHO
                   6130:          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
                   6131:          $ECHO "*** objects $objs is not portable!"
                   6132:          libobjs="$libobjs $objs"
                   6133:        fi
                   6134:       fi
                   6135: 
                   6136:       test "$dlself" != no && \
                   6137:        func_warning "\`-dlopen self' is ignored for libtool libraries"
                   6138: 
                   6139:       set dummy $rpath
                   6140:       shift
                   6141:       test "$#" -gt 1 && \
                   6142:        func_warning "ignoring multiple \`-rpath's for a libtool library"
                   6143: 
                   6144:       install_libdir="$1"
                   6145: 
                   6146:       oldlibs=
                   6147:       if test -z "$rpath"; then
                   6148:        if test "$build_libtool_libs" = yes; then
                   6149:          # Building a libtool convenience library.
                   6150:          # Some compilers have problems with a `.al' extension so
                   6151:          # convenience libraries should have the same extension an
                   6152:          # archive normally would.
                   6153:          oldlibs="$output_objdir/$libname.$libext $oldlibs"
                   6154:          build_libtool_libs=convenience
                   6155:          build_old_libs=yes
                   6156:        fi
                   6157: 
                   6158:        test -n "$vinfo" && \
                   6159:          func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
                   6160: 
                   6161:        test -n "$release" && \
                   6162:          func_warning "\`-release' is ignored for convenience libraries"
                   6163:       else
                   6164: 
                   6165:        # Parse the version information argument.
                   6166:        save_ifs="$IFS"; IFS=':'
                   6167:        set dummy $vinfo 0 0 0
                   6168:        shift
                   6169:        IFS="$save_ifs"
                   6170: 
                   6171:        test -n "$7" && \
                   6172:          func_fatal_help "too many parameters to \`-version-info'"
                   6173: 
                   6174:        # convert absolute version numbers to libtool ages
                   6175:        # this retains compatibility with .la files and attempts
                   6176:        # to make the code below a bit more comprehensible
                   6177: 
                   6178:        case $vinfo_number in
                   6179:        yes)
                   6180:          number_major="$1"
                   6181:          number_minor="$2"
                   6182:          number_revision="$3"
                   6183:          #
                   6184:          # There are really only two kinds -- those that
                   6185:          # use the current revision as the major version
                   6186:          # and those that subtract age and use age as
                   6187:          # a minor version.  But, then there is irix
                   6188:          # which has an extra 1 added just for fun
                   6189:          #
                   6190:          case $version_type in
                   6191:          darwin|linux|osf|windows|none)
                   6192:            func_arith $number_major + $number_minor
                   6193:            current=$func_arith_result
                   6194:            age="$number_minor"
                   6195:            revision="$number_revision"
                   6196:            ;;
                   6197:          freebsd-aout|freebsd-elf|sunos)
                   6198:            current="$number_major"
                   6199:            revision="$number_minor"
                   6200:            age="0"
                   6201:            ;;
                   6202:          irix|nonstopux)
                   6203:            func_arith $number_major + $number_minor
                   6204:            current=$func_arith_result
                   6205:            age="$number_minor"
                   6206:            revision="$number_minor"
                   6207:            lt_irix_increment=no
                   6208:            ;;
                   6209:          esac
                   6210:          ;;
                   6211:        no)
                   6212:          current="$1"
                   6213:          revision="$2"
                   6214:          age="$3"
                   6215:          ;;
                   6216:        esac
                   6217: 
                   6218:        # Check that each of the things are valid numbers.
                   6219:        case $current in
                   6220:        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
                   6221:        *)
                   6222:          func_error "CURRENT \`$current' must be a nonnegative integer"
                   6223:          func_fatal_error "\`$vinfo' is not valid version information"
                   6224:          ;;
                   6225:        esac
                   6226: 
                   6227:        case $revision in
                   6228:        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
                   6229:        *)
                   6230:          func_error "REVISION \`$revision' must be a nonnegative integer"
                   6231:          func_fatal_error "\`$vinfo' is not valid version information"
                   6232:          ;;
                   6233:        esac
                   6234: 
                   6235:        case $age in
                   6236:        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
                   6237:        *)
                   6238:          func_error "AGE \`$age' must be a nonnegative integer"
                   6239:          func_fatal_error "\`$vinfo' is not valid version information"
                   6240:          ;;
                   6241:        esac
                   6242: 
                   6243:        if test "$age" -gt "$current"; then
                   6244:          func_error "AGE \`$age' is greater than the current interface number \`$current'"
                   6245:          func_fatal_error "\`$vinfo' is not valid version information"
                   6246:        fi
                   6247: 
                   6248:        # Calculate the version variables.
                   6249:        major=
                   6250:        versuffix=
                   6251:        verstring=
                   6252:        case $version_type in
                   6253:        none) ;;
                   6254: 
                   6255:        darwin)
                   6256:          # Like Linux, but with the current version available in
                   6257:          # verstring for coding it into the library header
                   6258:          func_arith $current - $age
                   6259:          major=.$func_arith_result
                   6260:          versuffix="$major.$age.$revision"
                   6261:          # Darwin ld doesn't like 0 for these options...
                   6262:          func_arith $current + 1
                   6263:          minor_current=$func_arith_result
                   6264:          xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
                   6265:          verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
                   6266:          ;;
                   6267: 
                   6268:        freebsd-aout)
                   6269:          major=".$current"
                   6270:          versuffix=".$current.$revision";
                   6271:          ;;
                   6272: 
                   6273:        freebsd-elf)
                   6274:          major=".$current"
                   6275:          versuffix=".$current"
                   6276:          ;;
                   6277: 
                   6278:        irix | nonstopux)
                   6279:          if test "X$lt_irix_increment" = "Xno"; then
                   6280:            func_arith $current - $age
                   6281:          else
                   6282:            func_arith $current - $age + 1
                   6283:          fi
                   6284:          major=$func_arith_result
                   6285: 
                   6286:          case $version_type in
                   6287:            nonstopux) verstring_prefix=nonstopux ;;
                   6288:            *)         verstring_prefix=sgi ;;
                   6289:          esac
                   6290:          verstring="$verstring_prefix$major.$revision"
                   6291: 
                   6292:          # Add in all the interfaces that we are compatible with.
                   6293:          loop=$revision
                   6294:          while test "$loop" -ne 0; do
                   6295:            func_arith $revision - $loop
                   6296:            iface=$func_arith_result
                   6297:            func_arith $loop - 1
                   6298:            loop=$func_arith_result
                   6299:            verstring="$verstring_prefix$major.$iface:$verstring"
                   6300:          done
                   6301: 
                   6302:          # Before this point, $major must not contain `.'.
                   6303:          major=.$major
                   6304:          versuffix="$major.$revision"
                   6305:          ;;
                   6306: 
                   6307:        linux)
                   6308:          func_arith $current - $age
                   6309:          major=.$func_arith_result
                   6310:          versuffix="$major.$age.$revision"
                   6311:          ;;
                   6312: 
                   6313:        osf)
                   6314:          func_arith $current - $age
                   6315:          major=.$func_arith_result
                   6316:          versuffix=".$current.$age.$revision"
                   6317:          verstring="$current.$age.$revision"
                   6318: 
                   6319:          # Add in all the interfaces that we are compatible with.
                   6320:          loop=$age
                   6321:          while test "$loop" -ne 0; do
                   6322:            func_arith $current - $loop
                   6323:            iface=$func_arith_result
                   6324:            func_arith $loop - 1
                   6325:            loop=$func_arith_result
                   6326:            verstring="$verstring:${iface}.0"
                   6327:          done
                   6328: 
                   6329:          # Make executables depend on our current version.
                   6330:          verstring="$verstring:${current}.0"
                   6331:          ;;
                   6332: 
                   6333:        qnx)
                   6334:          major=".$current"
                   6335:          versuffix=".$current"
                   6336:          ;;
                   6337: 
                   6338:        sunos)
                   6339:          major=".$current"
                   6340:          versuffix=".$current.$revision"
                   6341:          ;;
                   6342: 
                   6343:        windows)
                   6344:          # Use '-' rather than '.', since we only want one
                   6345:          # extension on DOS 8.3 filesystems.
                   6346:          func_arith $current - $age
                   6347:          major=$func_arith_result
                   6348:          versuffix="-$major"
                   6349:          ;;
                   6350: 
                   6351:        *)
                   6352:          func_fatal_configuration "unknown library version type \`$version_type'"
                   6353:          ;;
                   6354:        esac
                   6355: 
                   6356:        # Clear the version info if we defaulted, and they specified a release.
                   6357:        if test -z "$vinfo" && test -n "$release"; then
                   6358:          major=
                   6359:          case $version_type in
                   6360:          darwin)
                   6361:            # we can't check for "0.0" in archive_cmds due to quoting
                   6362:            # problems, so we reset it completely
                   6363:            verstring=
                   6364:            ;;
                   6365:          *)
                   6366:            verstring="0.0"
                   6367:            ;;
                   6368:          esac
                   6369:          if test "$need_version" = no; then
                   6370:            versuffix=
                   6371:          else
                   6372:            versuffix=".0.0"
                   6373:          fi
                   6374:        fi
                   6375: 
                   6376:        # Remove version info from name if versioning should be avoided
                   6377:        if test "$avoid_version" = yes && test "$need_version" = no; then
                   6378:          major=
                   6379:          versuffix=
                   6380:          verstring=""
                   6381:        fi
                   6382: 
                   6383:        # Check to see if the archive will have undefined symbols.
                   6384:        if test "$allow_undefined" = yes; then
                   6385:          if test "$allow_undefined_flag" = unsupported; then
                   6386:            func_warning "undefined symbols not allowed in $host shared libraries"
                   6387:            build_libtool_libs=no
                   6388:            build_old_libs=yes
                   6389:          fi
                   6390:        else
                   6391:          # Don't allow undefined symbols.
                   6392:          allow_undefined_flag="$no_undefined_flag"
                   6393:        fi
                   6394: 
                   6395:       fi
                   6396: 
                   6397:       func_generate_dlsyms "$libname" "$libname" "yes"
                   6398:       libobjs="$libobjs $symfileobj"
                   6399:       test "X$libobjs" = "X " && libobjs=
                   6400: 
                   6401:       if test "$mode" != relink; then
                   6402:        # Remove our outputs, but don't remove object files since they
                   6403:        # may have been created when compiling PIC objects.
                   6404:        removelist=
                   6405:        tempremovelist=`$ECHO "$output_objdir/*"`
                   6406:        for p in $tempremovelist; do
                   6407:          case $p in
                   6408:            *.$objext | *.gcno)
                   6409:               ;;
                   6410:            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
                   6411:               if test "X$precious_files_regex" != "X"; then
                   6412:                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
                   6413:                 then
                   6414:                   continue
                   6415:                 fi
                   6416:               fi
                   6417:               removelist="$removelist $p"
                   6418:               ;;
                   6419:            *) ;;
                   6420:          esac
                   6421:        done
                   6422:        test -n "$removelist" && \
                   6423:          func_show_eval "${RM}r \$removelist"
                   6424:       fi
                   6425: 
                   6426:       # Now set the variables for building old libraries.
                   6427:       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
                   6428:        oldlibs="$oldlibs $output_objdir/$libname.$libext"
                   6429: 
                   6430:        # Transform .lo files to .o files.
                   6431:        oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
                   6432:       fi
                   6433: 
                   6434:       # Eliminate all temporary directories.
                   6435:       #for path in $notinst_path; do
                   6436:       #        lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
                   6437:       #        deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
                   6438:       #        dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
                   6439:       #done
                   6440: 
                   6441:       if test -n "$xrpath"; then
                   6442:        # If the user specified any rpath flags, then add them.
                   6443:        temp_xrpath=
                   6444:        for libdir in $xrpath; do
                   6445:          temp_xrpath="$temp_xrpath -R$libdir"
                   6446:          case "$finalize_rpath " in
                   6447:          *" $libdir "*) ;;
                   6448:          *) finalize_rpath="$finalize_rpath $libdir" ;;
                   6449:          esac
                   6450:        done
                   6451:        if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
                   6452:          dependency_libs="$temp_xrpath $dependency_libs"
                   6453:        fi
                   6454:       fi
                   6455: 
                   6456:       # Make sure dlfiles contains only unique files that won't be dlpreopened
                   6457:       old_dlfiles="$dlfiles"
                   6458:       dlfiles=
                   6459:       for lib in $old_dlfiles; do
                   6460:        case " $dlprefiles $dlfiles " in
                   6461:        *" $lib "*) ;;
                   6462:        *) dlfiles="$dlfiles $lib" ;;
                   6463:        esac
                   6464:       done
                   6465: 
                   6466:       # Make sure dlprefiles contains only unique files
                   6467:       old_dlprefiles="$dlprefiles"
                   6468:       dlprefiles=
                   6469:       for lib in $old_dlprefiles; do
                   6470:        case "$dlprefiles " in
                   6471:        *" $lib "*) ;;
                   6472:        *) dlprefiles="$dlprefiles $lib" ;;
                   6473:        esac
                   6474:       done
                   6475: 
                   6476:       if test "$build_libtool_libs" = yes; then
                   6477:        if test -n "$rpath"; then
                   6478:          case $host in
                   6479:          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
                   6480:            # these systems don't actually have a c library (as such)!
                   6481:            ;;
                   6482:          *-*-rhapsody* | *-*-darwin1.[012])
                   6483:            # Rhapsody C library is in the System framework
                   6484:            deplibs="$deplibs System.ltframework"
                   6485:            ;;
                   6486:          *-*-netbsd*)
                   6487:            # Don't link with libc until the a.out ld.so is fixed.
                   6488:            ;;
                   6489:          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
                   6490:            # Do not include libc due to us having libc/libc_r.
                   6491:            ;;
                   6492:          *-*-sco3.2v5* | *-*-sco5v6*)
                   6493:            # Causes problems with __ctype
                   6494:            ;;
                   6495:          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
                   6496:            # Compiler inserts libc in the correct place for threads to work
                   6497:            ;;
                   6498:          *)
                   6499:            # Add libc to deplibs on all other systems if necessary.
                   6500:            if test "$build_libtool_need_lc" = "yes"; then
                   6501:              deplibs="$deplibs -lc"
                   6502:            fi
                   6503:            ;;
                   6504:          esac
                   6505:        fi
                   6506: 
                   6507:        # Transform deplibs into only deplibs that can be linked in shared.
                   6508:        name_save=$name
                   6509:        libname_save=$libname
                   6510:        release_save=$release
                   6511:        versuffix_save=$versuffix
                   6512:        major_save=$major
                   6513:        # I'm not sure if I'm treating the release correctly.  I think
                   6514:        # release should show up in the -l (ie -lgmp5) so we don't want to
                   6515:        # add it in twice.  Is that correct?
                   6516:        release=""
                   6517:        versuffix=""
                   6518:        major=""
                   6519:        newdeplibs=
                   6520:        droppeddeps=no
                   6521:        case $deplibs_check_method in
                   6522:        pass_all)
                   6523:          # Don't check for shared/static.  Everything works.
                   6524:          # This might be a little naive.  We might want to check
                   6525:          # whether the library exists or not.  But this is on
                   6526:          # osf3 & osf4 and I'm not really sure... Just
                   6527:          # implementing what was already the behavior.
                   6528:          newdeplibs=$deplibs
                   6529:          ;;
                   6530:        test_compile)
                   6531:          # This code stresses the "libraries are programs" paradigm to its
                   6532:          # limits. Maybe even breaks it.  We compile a program, linking it
                   6533:          # against the deplibs as a proxy for the library.  Then we can check
                   6534:          # whether they linked in statically or dynamically with ldd.
                   6535:          $opt_dry_run || $RM conftest.c
                   6536:          cat > conftest.c <<EOF
                   6537:          int main() { return 0; }
                   6538: EOF
                   6539:          $opt_dry_run || $RM conftest
                   6540:          if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
                   6541:            ldd_output=`ldd conftest`
                   6542:            for i in $deplibs; do
                   6543:              case $i in
                   6544:              -l*)
                   6545:                func_stripname -l '' "$i"
                   6546:                name=$func_stripname_result
                   6547:                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                   6548:                  case " $predeps $postdeps " in
                   6549:                  *" $i "*)
                   6550:                    newdeplibs="$newdeplibs $i"
                   6551:                    i=""
                   6552:                    ;;
                   6553:                  esac
                   6554:                fi
                   6555:                if test -n "$i" ; then
                   6556:                  libname=`eval "\\$ECHO \"$libname_spec\""`
                   6557:                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                   6558:                  set dummy $deplib_matches; shift
                   6559:                  deplib_match=$1
                   6560:                  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                   6561:                    newdeplibs="$newdeplibs $i"
                   6562:                  else
                   6563:                    droppeddeps=yes
                   6564:                    $ECHO
                   6565:                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
                   6566:                    $ECHO "*** I have the capability to make that library automatically link in when"
                   6567:                    $ECHO "*** you link to this library.  But I can only do this if you have a"
                   6568:                    $ECHO "*** shared version of the library, which I believe you do not have"
                   6569:                    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
                   6570:                    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
                   6571:                  fi
                   6572:                fi
                   6573:                ;;
                   6574:              *)
                   6575:                newdeplibs="$newdeplibs $i"
                   6576:                ;;
                   6577:              esac
                   6578:            done
                   6579:          else
                   6580:            # Error occurred in the first compile.  Let's try to salvage
                   6581:            # the situation: Compile a separate program for each library.
                   6582:            for i in $deplibs; do
                   6583:              case $i in
                   6584:              -l*)
                   6585:                func_stripname -l '' "$i"
                   6586:                name=$func_stripname_result
                   6587:                $opt_dry_run || $RM conftest
                   6588:                if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
                   6589:                  ldd_output=`ldd conftest`
                   6590:                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                   6591:                    case " $predeps $postdeps " in
                   6592:                    *" $i "*)
                   6593:                      newdeplibs="$newdeplibs $i"
                   6594:                      i=""
                   6595:                      ;;
                   6596:                    esac
                   6597:                  fi
                   6598:                  if test -n "$i" ; then
                   6599:                    libname=`eval "\\$ECHO \"$libname_spec\""`
                   6600:                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                   6601:                    set dummy $deplib_matches; shift
                   6602:                    deplib_match=$1
                   6603:                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                   6604:                      newdeplibs="$newdeplibs $i"
                   6605:                    else
                   6606:                      droppeddeps=yes
                   6607:                      $ECHO
                   6608:                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
                   6609:                      $ECHO "*** I have the capability to make that library automatically link in when"
                   6610:                      $ECHO "*** you link to this library.  But I can only do this if you have a"
                   6611:                      $ECHO "*** shared version of the library, which you do not appear to have"
                   6612:                      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
                   6613:                      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
                   6614:                    fi
                   6615:                  fi
                   6616:                else
                   6617:                  droppeddeps=yes
                   6618:                  $ECHO
                   6619:                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
                   6620:                  $ECHO "*** make it link in!  You will probably need to install it or some"
                   6621:                  $ECHO "*** library that it depends on before this library will be fully"
                   6622:                  $ECHO "*** functional.  Installing it before continuing would be even better."
                   6623:                fi
                   6624:                ;;
                   6625:              *)
                   6626:                newdeplibs="$newdeplibs $i"
                   6627:                ;;
                   6628:              esac
                   6629:            done
                   6630:          fi
                   6631:          ;;
                   6632:        file_magic*)
                   6633:          set dummy $deplibs_check_method; shift
                   6634:          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
                   6635:          for a_deplib in $deplibs; do
                   6636:            case $a_deplib in
                   6637:            -l*)
                   6638:              func_stripname -l '' "$a_deplib"
                   6639:              name=$func_stripname_result
                   6640:              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                   6641:                case " $predeps $postdeps " in
                   6642:                *" $a_deplib "*)
                   6643:                  newdeplibs="$newdeplibs $a_deplib"
                   6644:                  a_deplib=""
                   6645:                  ;;
                   6646:                esac
                   6647:              fi
                   6648:              if test -n "$a_deplib" ; then
                   6649:                libname=`eval "\\$ECHO \"$libname_spec\""`
                   6650:                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                   6651:                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                   6652:                  for potent_lib in $potential_libs; do
                   6653:                      # Follow soft links.
                   6654:                      if ls -lLd "$potent_lib" 2>/dev/null |
                   6655:                         $GREP " -> " >/dev/null; then
                   6656:                        continue
                   6657:                      fi
                   6658:                      # The statement above tries to avoid entering an
                   6659:                      # endless loop below, in case of cyclic links.
                   6660:                      # We might still enter an endless loop, since a link
                   6661:                      # loop can be closed while we follow links,
                   6662:                      # but so what?
                   6663:                      potlib="$potent_lib"
                   6664:                      while test -h "$potlib" 2>/dev/null; do
                   6665:                        potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
                   6666:                        case $potliblink in
                   6667:                        [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
                   6668:                        *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
                   6669:                        esac
                   6670:                      done
                   6671:                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
                   6672:                         $SED -e 10q |
                   6673:                         $EGREP "$file_magic_regex" > /dev/null; then
                   6674:                        newdeplibs="$newdeplibs $a_deplib"
                   6675:                        a_deplib=""
                   6676:                        break 2
                   6677:                      fi
                   6678:                  done
                   6679:                done
                   6680:              fi
                   6681:              if test -n "$a_deplib" ; then
                   6682:                droppeddeps=yes
                   6683:                $ECHO
                   6684:                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
                   6685:                $ECHO "*** I have the capability to make that library automatically link in when"
                   6686:                $ECHO "*** you link to this library.  But I can only do this if you have a"
                   6687:                $ECHO "*** shared version of the library, which you do not appear to have"
                   6688:                $ECHO "*** because I did check the linker path looking for a file starting"
                   6689:                if test -z "$potlib" ; then
                   6690:                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
                   6691:                else
                   6692:                  $ECHO "*** with $libname and none of the candidates passed a file format test"
                   6693:                  $ECHO "*** using a file magic. Last file checked: $potlib"
                   6694:                fi
                   6695:              fi
                   6696:              ;;
                   6697:            *)
                   6698:              # Add a -L argument.
                   6699:              newdeplibs="$newdeplibs $a_deplib"
                   6700:              ;;
                   6701:            esac
                   6702:          done # Gone through all deplibs.
                   6703:          ;;
                   6704:        match_pattern*)
                   6705:          set dummy $deplibs_check_method; shift
                   6706:          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
                   6707:          for a_deplib in $deplibs; do
                   6708:            case $a_deplib in
                   6709:            -l*)
                   6710:              func_stripname -l '' "$a_deplib"
                   6711:              name=$func_stripname_result
                   6712:              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                   6713:                case " $predeps $postdeps " in
                   6714:                *" $a_deplib "*)
                   6715:                  newdeplibs="$newdeplibs $a_deplib"
                   6716:                  a_deplib=""
                   6717:                  ;;
                   6718:                esac
                   6719:              fi
                   6720:              if test -n "$a_deplib" ; then
                   6721:                libname=`eval "\\$ECHO \"$libname_spec\""`
                   6722:                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                   6723:                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                   6724:                  for potent_lib in $potential_libs; do
                   6725:                    potlib="$potent_lib" # see symlink-check above in file_magic test
                   6726:                    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
                   6727:                       $EGREP "$match_pattern_regex" > /dev/null; then
                   6728:                      newdeplibs="$newdeplibs $a_deplib"
                   6729:                      a_deplib=""
                   6730:                      break 2
                   6731:                    fi
                   6732:                  done
                   6733:                done
                   6734:              fi
                   6735:              if test -n "$a_deplib" ; then
                   6736:                droppeddeps=yes
                   6737:                $ECHO
                   6738:                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
                   6739:                $ECHO "*** I have the capability to make that library automatically link in when"
                   6740:                $ECHO "*** you link to this library.  But I can only do this if you have a"
                   6741:                $ECHO "*** shared version of the library, which you do not appear to have"
                   6742:                $ECHO "*** because I did check the linker path looking for a file starting"
                   6743:                if test -z "$potlib" ; then
                   6744:                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
                   6745:                else
                   6746:                  $ECHO "*** with $libname and none of the candidates passed a file format test"
                   6747:                  $ECHO "*** using a regex pattern. Last file checked: $potlib"
                   6748:                fi
                   6749:              fi
                   6750:              ;;
                   6751:            *)
                   6752:              # Add a -L argument.
                   6753:              newdeplibs="$newdeplibs $a_deplib"
                   6754:              ;;
                   6755:            esac
                   6756:          done # Gone through all deplibs.
                   6757:          ;;
                   6758:        none | unknown | *)
                   6759:          newdeplibs=""
                   6760:          tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
                   6761:              -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
                   6762:          if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                   6763:            for i in $predeps $postdeps ; do
                   6764:              # can't use Xsed below, because $i might contain '/'
                   6765:              tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
                   6766:            done
                   6767:          fi
                   6768:          if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[      ]//g' |
                   6769:             $GREP . >/dev/null; then
                   6770:            $ECHO
                   6771:            if test "X$deplibs_check_method" = "Xnone"; then
                   6772:              $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
                   6773:            else
                   6774:              $ECHO "*** Warning: inter-library dependencies are not known to be supported."
                   6775:            fi
                   6776:            $ECHO "*** All declared inter-library dependencies are being dropped."
                   6777:            droppeddeps=yes
                   6778:          fi
                   6779:          ;;
                   6780:        esac
                   6781:        versuffix=$versuffix_save
                   6782:        major=$major_save
                   6783:        release=$release_save
                   6784:        libname=$libname_save
                   6785:        name=$name_save
                   6786: 
                   6787:        case $host in
                   6788:        *-*-rhapsody* | *-*-darwin1.[012])
                   6789:          # On Rhapsody replace the C library with the System framework
                   6790:          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
                   6791:          ;;
                   6792:        esac
                   6793: 
                   6794:        if test "$droppeddeps" = yes; then
                   6795:          if test "$module" = yes; then
                   6796:            $ECHO
                   6797:            $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
                   6798:            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
                   6799:            $ECHO "*** a static module, that should work as long as the dlopening"
                   6800:            $ECHO "*** application is linked with the -dlopen flag."
                   6801:            if test -z "$global_symbol_pipe"; then
                   6802:              $ECHO
                   6803:              $ECHO "*** However, this would only work if libtool was able to extract symbol"
                   6804:              $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
                   6805:              $ECHO "*** not find such a program.  So, this module is probably useless."
                   6806:              $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
                   6807:            fi
                   6808:            if test "$build_old_libs" = no; then
                   6809:              oldlibs="$output_objdir/$libname.$libext"
                   6810:              build_libtool_libs=module
                   6811:              build_old_libs=yes
                   6812:            else
                   6813:              build_libtool_libs=no
                   6814:            fi
                   6815:          else
                   6816:            $ECHO "*** The inter-library dependencies that have been dropped here will be"
                   6817:            $ECHO "*** automatically added whenever a program is linked with this library"
                   6818:            $ECHO "*** or is declared to -dlopen it."
                   6819: 
                   6820:            if test "$allow_undefined" = no; then
                   6821:              $ECHO
                   6822:              $ECHO "*** Since this library must not contain undefined symbols,"
                   6823:              $ECHO "*** because either the platform does not support them or"
                   6824:              $ECHO "*** it was explicitly requested with -no-undefined,"
                   6825:              $ECHO "*** libtool will only create a static version of it."
                   6826:              if test "$build_old_libs" = no; then
                   6827:                oldlibs="$output_objdir/$libname.$libext"
                   6828:                build_libtool_libs=module
                   6829:                build_old_libs=yes
                   6830:              else
                   6831:                build_libtool_libs=no
                   6832:              fi
                   6833:            fi
                   6834:          fi
                   6835:        fi
                   6836:        # Done checking deplibs!
                   6837:        deplibs=$newdeplibs
                   6838:       fi
                   6839:       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
                   6840:       case $host in
                   6841:        *-*-darwin*)
                   6842:          newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
                   6843:          new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
                   6844:          deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
                   6845:          ;;
                   6846:       esac
                   6847: 
                   6848:       # move library search paths that coincide with paths to not yet
                   6849:       # installed libraries to the beginning of the library search list
                   6850:       new_libs=
                   6851:       for path in $notinst_path; do
                   6852:        case " $new_libs " in
                   6853:        *" -L$path/$objdir "*) ;;
                   6854:        *)
                   6855:          case " $deplibs " in
                   6856:          *" -L$path/$objdir "*)
                   6857:            new_libs="$new_libs -L$path/$objdir" ;;
                   6858:          esac
                   6859:          ;;
                   6860:        esac
                   6861:       done
                   6862:       for deplib in $deplibs; do
                   6863:        case $deplib in
                   6864:        -L*)
                   6865:          case " $new_libs " in
                   6866:          *" $deplib "*) ;;
                   6867:          *) new_libs="$new_libs $deplib" ;;
                   6868:          esac
                   6869:          ;;
                   6870:        *) new_libs="$new_libs $deplib" ;;
                   6871:        esac
                   6872:       done
                   6873:       deplibs="$new_libs"
                   6874: 
                   6875:       # All the library-specific variables (install_libdir is set above).
                   6876:       library_names=
                   6877:       old_library=
                   6878:       dlname=
                   6879: 
                   6880:       # Test again, we may have decided not to build it any more
                   6881:       if test "$build_libtool_libs" = yes; then
                   6882:        if test "$hardcode_into_libs" = yes; then
                   6883:          # Hardcode the library paths
                   6884:          hardcode_libdirs=
                   6885:          dep_rpath=
                   6886:          rpath="$finalize_rpath"
                   6887:          test "$mode" != relink && rpath="$compile_rpath$rpath"
                   6888:          for libdir in $rpath; do
                   6889:            if test -n "$hardcode_libdir_flag_spec"; then
                   6890:              if test -n "$hardcode_libdir_separator"; then
                   6891:                if test -z "$hardcode_libdirs"; then
                   6892:                  hardcode_libdirs="$libdir"
                   6893:                else
                   6894:                  # Just accumulate the unique libdirs.
                   6895:                  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
                   6896:                  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                   6897:                    ;;
                   6898:                  *)
                   6899:                    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                   6900:                    ;;
                   6901:                  esac
                   6902:                fi
                   6903:              else
                   6904:                eval flag=\"$hardcode_libdir_flag_spec\"
                   6905:                dep_rpath="$dep_rpath $flag"
                   6906:              fi
                   6907:            elif test -n "$runpath_var"; then
                   6908:              case "$perm_rpath " in
                   6909:              *" $libdir "*) ;;
                   6910:              *) perm_rpath="$perm_rpath $libdir" ;;
                   6911:              esac
                   6912:            fi
                   6913:          done
                   6914:          # Substitute the hardcoded libdirs into the rpath.
                   6915:          if test -n "$hardcode_libdir_separator" &&
                   6916:             test -n "$hardcode_libdirs"; then
                   6917:            libdir="$hardcode_libdirs"
                   6918:            if test -n "$hardcode_libdir_flag_spec_ld"; then
                   6919:              eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
                   6920:            else
                   6921:              eval dep_rpath=\"$hardcode_libdir_flag_spec\"
                   6922:            fi
                   6923:          fi
                   6924:          if test -n "$runpath_var" && test -n "$perm_rpath"; then
                   6925:            # We should set the runpath_var.
                   6926:            rpath=
                   6927:            for dir in $perm_rpath; do
                   6928:              rpath="$rpath$dir:"
                   6929:            done
                   6930:            eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
                   6931:          fi
                   6932:          test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
                   6933:        fi
                   6934: 
                   6935:        shlibpath="$finalize_shlibpath"
                   6936:        test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
                   6937:        if test -n "$shlibpath"; then
                   6938:          eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
                   6939:        fi
                   6940: 
                   6941:        # Get the real and link names of the library.
                   6942:        eval shared_ext=\"$shrext_cmds\"
                   6943:        eval library_names=\"$library_names_spec\"
                   6944:        set dummy $library_names
                   6945:        shift
                   6946:        realname="$1"
                   6947:        shift
                   6948: 
                   6949:        if test -n "$soname_spec"; then
                   6950:          eval soname=\"$soname_spec\"
                   6951:        else
                   6952:          soname="$realname"
                   6953:        fi
                   6954:        if test -z "$dlname"; then
                   6955:          dlname=$soname
                   6956:        fi
                   6957: 
                   6958:        lib="$output_objdir/$realname"
                   6959:        linknames=
                   6960:        for link
                   6961:        do
                   6962:          linknames="$linknames $link"
                   6963:        done
                   6964: 
                   6965:        # Use standard objects if they are pic
                   6966:        test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
                   6967:        test "X$libobjs" = "X " && libobjs=
                   6968: 
                   6969:        delfiles=
                   6970:        if test -n "$export_symbols" && test -n "$include_expsyms"; then
                   6971:          $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
                   6972:          export_symbols="$output_objdir/$libname.uexp"
                   6973:          delfiles="$delfiles $export_symbols"
                   6974:        fi
                   6975: 
                   6976:        orig_export_symbols=
                   6977:        case $host_os in
                   6978:        cygwin* | mingw* | cegcc*)
                   6979:          if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
                   6980:            # exporting using user supplied symfile
                   6981:            if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
                   6982:              # and it's NOT already a .def file. Must figure out
                   6983:              # which of the given symbols are data symbols and tag
                   6984:              # them as such. So, trigger use of export_symbols_cmds.
                   6985:              # export_symbols gets reassigned inside the "prepare
                   6986:              # the list of exported symbols" if statement, so the
                   6987:              # include_expsyms logic still works.
                   6988:              orig_export_symbols="$export_symbols"
                   6989:              export_symbols=
                   6990:              always_export_symbols=yes
                   6991:            fi
                   6992:          fi
                   6993:          ;;
                   6994:        esac
                   6995: 
                   6996:        # Prepare the list of exported symbols
                   6997:        if test -z "$export_symbols"; then
                   6998:          if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
                   6999:            func_verbose "generating symbol list for \`$libname.la'"
                   7000:            export_symbols="$output_objdir/$libname.exp"
                   7001:            $opt_dry_run || $RM $export_symbols
                   7002:            cmds=$export_symbols_cmds
                   7003:            save_ifs="$IFS"; IFS='~'
                   7004:            for cmd in $cmds; do
                   7005:              IFS="$save_ifs"
                   7006:              eval cmd=\"$cmd\"
                   7007:              func_len " $cmd"
                   7008:              len=$func_len_result
                   7009:              if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
                   7010:                func_show_eval "$cmd" 'exit $?'
                   7011:                skipped_export=false
                   7012:              else
                   7013:                # The command line is too long to execute in one step.
                   7014:                func_verbose "using reloadable object file for export list..."
                   7015:                skipped_export=:
                   7016:                # Break out early, otherwise skipped_export may be
                   7017:                # set to false by a later but shorter cmd.
                   7018:                break
                   7019:              fi
                   7020:            done
                   7021:            IFS="$save_ifs"
                   7022:            if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
                   7023:              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
                   7024:              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
                   7025:            fi
                   7026:          fi
                   7027:        fi
                   7028: 
                   7029:        if test -n "$export_symbols" && test -n "$include_expsyms"; then
                   7030:          tmp_export_symbols="$export_symbols"
                   7031:          test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
                   7032:          $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
                   7033:        fi
                   7034: 
                   7035:        if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
                   7036:          # The given exports_symbols file has to be filtered, so filter it.
                   7037:          func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
                   7038:          # FIXME: $output_objdir/$libname.filter potentially contains lots of
                   7039:          # 's' commands which not all seds can handle. GNU sed should be fine
                   7040:          # though. Also, the filter scales superlinearly with the number of
                   7041:          # global variables. join(1) would be nice here, but unfortunately
                   7042:          # isn't a blessed tool.
                   7043:          $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
                   7044:          delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
                   7045:          export_symbols=$output_objdir/$libname.def
                   7046:          $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
                   7047:        fi
                   7048: 
                   7049:        tmp_deplibs=
                   7050:        for test_deplib in $deplibs; do
                   7051:          case " $convenience " in
                   7052:          *" $test_deplib "*) ;;
                   7053:          *)
                   7054:            tmp_deplibs="$tmp_deplibs $test_deplib"
                   7055:            ;;
                   7056:          esac
                   7057:        done
                   7058:        deplibs="$tmp_deplibs"
                   7059: 
                   7060:        if test -n "$convenience"; then
                   7061:          if test -n "$whole_archive_flag_spec" &&
                   7062:            test "$compiler_needs_object" = yes &&
                   7063:            test -z "$libobjs"; then
                   7064:            # extract the archives, so we have objects to list.
                   7065:            # TODO: could optimize this to just extract one archive.
                   7066:            whole_archive_flag_spec=
                   7067:          fi
                   7068:          if test -n "$whole_archive_flag_spec"; then
                   7069:            save_libobjs=$libobjs
                   7070:            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
                   7071:            test "X$libobjs" = "X " && libobjs=
                   7072:          else
                   7073:            gentop="$output_objdir/${outputname}x"
                   7074:            generated="$generated $gentop"
                   7075: 
                   7076:            func_extract_archives $gentop $convenience
                   7077:            libobjs="$libobjs $func_extract_archives_result"
                   7078:            test "X$libobjs" = "X " && libobjs=
                   7079:          fi
                   7080:        fi
                   7081: 
                   7082:        if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
                   7083:          eval flag=\"$thread_safe_flag_spec\"
                   7084:          linker_flags="$linker_flags $flag"
                   7085:        fi
                   7086: 
                   7087:        # Make a backup of the uninstalled library when relinking
                   7088:        if test "$mode" = relink; then
                   7089:          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
                   7090:        fi
                   7091: 
                   7092:        # Do each of the archive commands.
                   7093:        if test "$module" = yes && test -n "$module_cmds" ; then
                   7094:          if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
                   7095:            eval test_cmds=\"$module_expsym_cmds\"
                   7096:            cmds=$module_expsym_cmds
                   7097:          else
                   7098:            eval test_cmds=\"$module_cmds\"
                   7099:            cmds=$module_cmds
                   7100:          fi
                   7101:        else
                   7102:          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
                   7103:            eval test_cmds=\"$archive_expsym_cmds\"
                   7104:            cmds=$archive_expsym_cmds
                   7105:          else
                   7106:            eval test_cmds=\"$archive_cmds\"
                   7107:            cmds=$archive_cmds
                   7108:          fi
                   7109:        fi
                   7110: 
                   7111:        if test "X$skipped_export" != "X:" &&
                   7112:           func_len " $test_cmds" &&
                   7113:           len=$func_len_result &&
                   7114:           test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
                   7115:          :
                   7116:        else
                   7117:          # The command line is too long to link in one step, link piecewise
                   7118:          # or, if using GNU ld and skipped_export is not :, use a linker
                   7119:          # script.
                   7120: 
                   7121:          # Save the value of $output and $libobjs because we want to
                   7122:          # use them later.  If we have whole_archive_flag_spec, we
                   7123:          # want to use save_libobjs as it was before
                   7124:          # whole_archive_flag_spec was expanded, because we can't
                   7125:          # assume the linker understands whole_archive_flag_spec.
                   7126:          # This may have to be revisited, in case too many
                   7127:          # convenience libraries get linked in and end up exceeding
                   7128:          # the spec.
                   7129:          if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
                   7130:            save_libobjs=$libobjs
                   7131:          fi
                   7132:          save_output=$output
                   7133:          output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
                   7134: 
                   7135:          # Clear the reloadable object creation command queue and
                   7136:          # initialize k to one.
                   7137:          test_cmds=
                   7138:          concat_cmds=
                   7139:          objlist=
                   7140:          last_robj=
                   7141:          k=1
                   7142: 
                   7143:          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
                   7144:            output=${output_objdir}/${output_la}.lnkscript
                   7145:            func_verbose "creating GNU ld script: $output"
                   7146:            $ECHO 'INPUT (' > $output
                   7147:            for obj in $save_libobjs
                   7148:            do
                   7149:              $ECHO "$obj" >> $output
                   7150:            done
                   7151:            $ECHO ')' >> $output
                   7152:            delfiles="$delfiles $output"
                   7153:          elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
                   7154:            output=${output_objdir}/${output_la}.lnk
                   7155:            func_verbose "creating linker input file list: $output"
                   7156:            : > $output
                   7157:            set x $save_libobjs
                   7158:            shift
                   7159:            firstobj=
                   7160:            if test "$compiler_needs_object" = yes; then
                   7161:              firstobj="$1 "
                   7162:              shift
                   7163:            fi
                   7164:            for obj
                   7165:            do
                   7166:              $ECHO "$obj" >> $output
                   7167:            done
                   7168:            delfiles="$delfiles $output"
                   7169:            output=$firstobj\"$file_list_spec$output\"
                   7170:          else
                   7171:            if test -n "$save_libobjs"; then
                   7172:              func_verbose "creating reloadable object files..."
                   7173:              output=$output_objdir/$output_la-${k}.$objext
                   7174:              eval test_cmds=\"$reload_cmds\"
                   7175:              func_len " $test_cmds"
                   7176:              len0=$func_len_result
                   7177:              len=$len0
                   7178: 
                   7179:              # Loop over the list of objects to be linked.
                   7180:              for obj in $save_libobjs
                   7181:              do
                   7182:                func_len " $obj"
                   7183:                func_arith $len + $func_len_result
                   7184:                len=$func_arith_result
                   7185:                if test "X$objlist" = X ||
                   7186:                   test "$len" -lt "$max_cmd_len"; then
                   7187:                  func_append objlist " $obj"
                   7188:                else
                   7189:                  # The command $test_cmds is almost too long, add a
                   7190:                  # command to the queue.
                   7191:                  if test "$k" -eq 1 ; then
                   7192:                    # The first file doesn't have a previous command to add.
                   7193:                    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
                   7194:                  else
                   7195:                    # All subsequent reloadable object files will link in
                   7196:                    # the last one created.
                   7197:                    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
                   7198:                  fi
                   7199:                  last_robj=$output_objdir/$output_la-${k}.$objext
                   7200:                  func_arith $k + 1
                   7201:                  k=$func_arith_result
                   7202:                  output=$output_objdir/$output_la-${k}.$objext
                   7203:                  objlist=$obj
                   7204:                  func_len " $last_robj"
                   7205:                  func_arith $len0 + $func_len_result
                   7206:                  len=$func_arith_result
                   7207:                fi
                   7208:              done
                   7209:              # Handle the remaining objects by creating one last
                   7210:              # reloadable object file.  All subsequent reloadable object
                   7211:              # files will link in the last one created.
                   7212:              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
                   7213:              eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
                   7214:              if test -n "$last_robj"; then
                   7215:                eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
                   7216:              fi
                   7217:              delfiles="$delfiles $output"
                   7218: 
                   7219:            else
                   7220:              output=
                   7221:            fi
                   7222: 
                   7223:            if ${skipped_export-false}; then
                   7224:              func_verbose "generating symbol list for \`$libname.la'"
                   7225:              export_symbols="$output_objdir/$libname.exp"
                   7226:              $opt_dry_run || $RM $export_symbols
                   7227:              libobjs=$output
                   7228:              # Append the command to create the export file.
                   7229:              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
                   7230:              eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
                   7231:              if test -n "$last_robj"; then
                   7232:                eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
                   7233:              fi
                   7234:            fi
                   7235: 
                   7236:            test -n "$save_libobjs" &&
                   7237:              func_verbose "creating a temporary reloadable object file: $output"
                   7238: 
                   7239:            # Loop through the commands generated above and execute them.
                   7240:            save_ifs="$IFS"; IFS='~'
                   7241:            for cmd in $concat_cmds; do
                   7242:              IFS="$save_ifs"
                   7243:              $opt_silent || {
                   7244:                  func_quote_for_expand "$cmd"
                   7245:                  eval "func_echo $func_quote_for_expand_result"
                   7246:              }
                   7247:              $opt_dry_run || eval "$cmd" || {
                   7248:                lt_exit=$?
                   7249: 
                   7250:                # Restore the uninstalled library and exit
                   7251:                if test "$mode" = relink; then
                   7252:                  ( cd "$output_objdir" && \
                   7253:                    $RM "${realname}T" && \
                   7254:                    $MV "${realname}U" "$realname" )
                   7255:                fi
                   7256: 
                   7257:                exit $lt_exit
                   7258:              }
                   7259:            done
                   7260:            IFS="$save_ifs"
                   7261: 
                   7262:            if test -n "$export_symbols_regex" && ${skipped_export-false}; then
                   7263:              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
                   7264:              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
                   7265:            fi
                   7266:          fi
                   7267: 
                   7268:           if ${skipped_export-false}; then
                   7269:            if test -n "$export_symbols" && test -n "$include_expsyms"; then
                   7270:              tmp_export_symbols="$export_symbols"
                   7271:              test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
                   7272:              $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
                   7273:            fi
                   7274: 
                   7275:            if test -n "$orig_export_symbols"; then
                   7276:              # The given exports_symbols file has to be filtered, so filter it.
                   7277:              func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
                   7278:              # FIXME: $output_objdir/$libname.filter potentially contains lots of
                   7279:              # 's' commands which not all seds can handle. GNU sed should be fine
                   7280:              # though. Also, the filter scales superlinearly with the number of
                   7281:              # global variables. join(1) would be nice here, but unfortunately
                   7282:              # isn't a blessed tool.
                   7283:              $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
                   7284:              delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
                   7285:              export_symbols=$output_objdir/$libname.def
                   7286:              $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
                   7287:            fi
                   7288:          fi
                   7289: 
                   7290:          libobjs=$output
                   7291:          # Restore the value of output.
                   7292:          output=$save_output
                   7293: 
                   7294:          if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
                   7295:            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
                   7296:            test "X$libobjs" = "X " && libobjs=
                   7297:          fi
                   7298:          # Expand the library linking commands again to reset the
                   7299:          # value of $libobjs for piecewise linking.
                   7300: 
                   7301:          # Do each of the archive commands.
                   7302:          if test "$module" = yes && test -n "$module_cmds" ; then
                   7303:            if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
                   7304:              cmds=$module_expsym_cmds
                   7305:            else
                   7306:              cmds=$module_cmds
                   7307:            fi
                   7308:          else
                   7309:            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
                   7310:              cmds=$archive_expsym_cmds
                   7311:            else
                   7312:              cmds=$archive_cmds
                   7313:            fi
                   7314:          fi
                   7315:        fi
                   7316: 
                   7317:        if test -n "$delfiles"; then
                   7318:          # Append the command to remove temporary files to $cmds.
                   7319:          eval cmds=\"\$cmds~\$RM $delfiles\"
                   7320:        fi
                   7321: 
                   7322:        # Add any objects from preloaded convenience libraries
                   7323:        if test -n "$dlprefiles"; then
                   7324:          gentop="$output_objdir/${outputname}x"
                   7325:          generated="$generated $gentop"
                   7326: 
                   7327:          func_extract_archives $gentop $dlprefiles
                   7328:          libobjs="$libobjs $func_extract_archives_result"
                   7329:          test "X$libobjs" = "X " && libobjs=
                   7330:        fi
                   7331: 
                   7332:        save_ifs="$IFS"; IFS='~'
                   7333:        for cmd in $cmds; do
                   7334:          IFS="$save_ifs"
                   7335:          eval cmd=\"$cmd\"
                   7336:          $opt_silent || {
                   7337:            func_quote_for_expand "$cmd"
                   7338:            eval "func_echo $func_quote_for_expand_result"
                   7339:          }
                   7340:          $opt_dry_run || eval "$cmd" || {
                   7341:            lt_exit=$?
                   7342: 
                   7343:            # Restore the uninstalled library and exit
                   7344:            if test "$mode" = relink; then
                   7345:              ( cd "$output_objdir" && \
                   7346:                $RM "${realname}T" && \
                   7347:                $MV "${realname}U" "$realname" )
                   7348:            fi
                   7349: 
                   7350:            exit $lt_exit
                   7351:          }
                   7352:        done
                   7353:        IFS="$save_ifs"
                   7354: 
                   7355:        # Restore the uninstalled library and exit
                   7356:        if test "$mode" = relink; then
                   7357:          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
                   7358: 
                   7359:          if test -n "$convenience"; then
                   7360:            if test -z "$whole_archive_flag_spec"; then
                   7361:              func_show_eval '${RM}r "$gentop"'
                   7362:            fi
                   7363:          fi
                   7364: 
                   7365:          exit $EXIT_SUCCESS
                   7366:        fi
                   7367: 
                   7368:        # Create links to the real library.
                   7369:        for linkname in $linknames; do
                   7370:          if test "$realname" != "$linkname"; then
                   7371:            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
                   7372:          fi
                   7373:        done
                   7374: 
                   7375:        # If -module or -export-dynamic was specified, set the dlname.
                   7376:        if test "$module" = yes || test "$export_dynamic" = yes; then
                   7377:          # On all known operating systems, these are identical.
                   7378:          dlname="$soname"
                   7379:        fi
                   7380:       fi
                   7381:       ;;
                   7382: 
                   7383:     obj)
                   7384:       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
                   7385:        func_warning "\`-dlopen' is ignored for objects"
                   7386:       fi
                   7387: 
                   7388:       case " $deplibs" in
                   7389:       *\ -l* | *\ -L*)
                   7390:        func_warning "\`-l' and \`-L' are ignored for objects" ;;
                   7391:       esac
                   7392: 
                   7393:       test -n "$rpath" && \
                   7394:        func_warning "\`-rpath' is ignored for objects"
                   7395: 
                   7396:       test -n "$xrpath" && \
                   7397:        func_warning "\`-R' is ignored for objects"
                   7398: 
                   7399:       test -n "$vinfo" && \
                   7400:        func_warning "\`-version-info' is ignored for objects"
                   7401: 
                   7402:       test -n "$release" && \
                   7403:        func_warning "\`-release' is ignored for objects"
                   7404: 
                   7405:       case $output in
                   7406:       *.lo)
                   7407:        test -n "$objs$old_deplibs" && \
                   7408:          func_fatal_error "cannot build library object \`$output' from non-libtool objects"
                   7409: 
                   7410:        libobj=$output
                   7411:        func_lo2o "$libobj"
                   7412:        obj=$func_lo2o_result
                   7413:        ;;
                   7414:       *)
                   7415:        libobj=
                   7416:        obj="$output"
                   7417:        ;;
                   7418:       esac
                   7419: 
                   7420:       # Delete the old objects.
                   7421:       $opt_dry_run || $RM $obj $libobj
                   7422: 
                   7423:       # Objects from convenience libraries.  This assumes
                   7424:       # single-version convenience libraries.  Whenever we create
                   7425:       # different ones for PIC/non-PIC, this we'll have to duplicate
                   7426:       # the extraction.
                   7427:       reload_conv_objs=
                   7428:       gentop=
                   7429:       # reload_cmds runs $LD directly, so let us get rid of
                   7430:       # -Wl from whole_archive_flag_spec and hope we can get by with
                   7431:       # turning comma into space..
                   7432:       wl=
                   7433: 
                   7434:       if test -n "$convenience"; then
                   7435:        if test -n "$whole_archive_flag_spec"; then
                   7436:          eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
                   7437:          reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
                   7438:        else
                   7439:          gentop="$output_objdir/${obj}x"
                   7440:          generated="$generated $gentop"
                   7441: 
                   7442:          func_extract_archives $gentop $convenience
                   7443:          reload_conv_objs="$reload_objs $func_extract_archives_result"
                   7444:        fi
                   7445:       fi
                   7446: 
                   7447:       # Create the old-style object.
                   7448:       reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
                   7449: 
                   7450:       output="$obj"
                   7451:       func_execute_cmds "$reload_cmds" 'exit $?'
                   7452: 
                   7453:       # Exit if we aren't doing a library object file.
                   7454:       if test -z "$libobj"; then
                   7455:        if test -n "$gentop"; then
                   7456:          func_show_eval '${RM}r "$gentop"'
                   7457:        fi
                   7458: 
                   7459:        exit $EXIT_SUCCESS
                   7460:       fi
                   7461: 
                   7462:       if test "$build_libtool_libs" != yes; then
                   7463:        if test -n "$gentop"; then
                   7464:          func_show_eval '${RM}r "$gentop"'
                   7465:        fi
                   7466: 
                   7467:        # Create an invalid libtool object if no PIC, so that we don't
                   7468:        # accidentally link it into a program.
                   7469:        # $show "echo timestamp > $libobj"
                   7470:        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
                   7471:        exit $EXIT_SUCCESS
                   7472:       fi
                   7473: 
                   7474:       if test -n "$pic_flag" || test "$pic_mode" != default; then
                   7475:        # Only do commands if we really have different PIC objects.
                   7476:        reload_objs="$libobjs $reload_conv_objs"
                   7477:        output="$libobj"
                   7478:        func_execute_cmds "$reload_cmds" 'exit $?'
                   7479:       fi
                   7480: 
                   7481:       if test -n "$gentop"; then
                   7482:        func_show_eval '${RM}r "$gentop"'
                   7483:       fi
                   7484: 
                   7485:       exit $EXIT_SUCCESS
                   7486:       ;;
                   7487: 
                   7488:     prog)
                   7489:       case $host in
                   7490:        *cygwin*) func_stripname '' '.exe' "$output"
                   7491:                  output=$func_stripname_result.exe;;
                   7492:       esac
                   7493:       test -n "$vinfo" && \
                   7494:        func_warning "\`-version-info' is ignored for programs"
                   7495: 
                   7496:       test -n "$release" && \
                   7497:        func_warning "\`-release' is ignored for programs"
                   7498: 
                   7499:       test "$preload" = yes \
                   7500:         && test "$dlopen_support" = unknown \
                   7501:        && test "$dlopen_self" = unknown \
                   7502:        && test "$dlopen_self_static" = unknown && \
                   7503:          func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
                   7504: 
                   7505:       case $host in
                   7506:       *-*-rhapsody* | *-*-darwin1.[012])
                   7507:        # On Rhapsody replace the C library is the System framework
                   7508:        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
                   7509:        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
                   7510:        ;;
                   7511:       esac
                   7512: 
                   7513:       case $host in
                   7514:       *-*-darwin*)
                   7515:        # Don't allow lazy linking, it breaks C++ global constructors
                   7516:        # But is supposedly fixed on 10.4 or later (yay!).
                   7517:        if test "$tagname" = CXX ; then
                   7518:          case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
                   7519:            10.[0123])
                   7520:              compile_command="$compile_command ${wl}-bind_at_load"
                   7521:              finalize_command="$finalize_command ${wl}-bind_at_load"
                   7522:            ;;
                   7523:          esac
                   7524:        fi
                   7525:        # Time to change all our "foo.ltframework" stuff back to "-framework foo"
                   7526:        compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
                   7527:        finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
                   7528:        ;;
                   7529:       esac
                   7530: 
                   7531: 
                   7532:       # move library search paths that coincide with paths to not yet
                   7533:       # installed libraries to the beginning of the library search list
                   7534:       new_libs=
                   7535:       for path in $notinst_path; do
                   7536:        case " $new_libs " in
                   7537:        *" -L$path/$objdir "*) ;;
                   7538:        *)
                   7539:          case " $compile_deplibs " in
                   7540:          *" -L$path/$objdir "*)
                   7541:            new_libs="$new_libs -L$path/$objdir" ;;
                   7542:          esac
                   7543:          ;;
                   7544:        esac
                   7545:       done
                   7546:       for deplib in $compile_deplibs; do
                   7547:        case $deplib in
                   7548:        -L*)
                   7549:          case " $new_libs " in
                   7550:          *" $deplib "*) ;;
                   7551:          *) new_libs="$new_libs $deplib" ;;
                   7552:          esac
                   7553:          ;;
                   7554:        *) new_libs="$new_libs $deplib" ;;
                   7555:        esac
                   7556:       done
                   7557:       compile_deplibs="$new_libs"
                   7558: 
                   7559: 
                   7560:       compile_command="$compile_command $compile_deplibs"
                   7561:       finalize_command="$finalize_command $finalize_deplibs"
                   7562: 
                   7563:       if test -n "$rpath$xrpath"; then
                   7564:        # If the user specified any rpath flags, then add them.
                   7565:        for libdir in $rpath $xrpath; do
                   7566:          # This is the magic to use -rpath.
                   7567:          case "$finalize_rpath " in
                   7568:          *" $libdir "*) ;;
                   7569:          *) finalize_rpath="$finalize_rpath $libdir" ;;
                   7570:          esac
                   7571:        done
                   7572:       fi
                   7573: 
                   7574:       # Now hardcode the library paths
                   7575:       rpath=
                   7576:       hardcode_libdirs=
                   7577:       for libdir in $compile_rpath $finalize_rpath; do
                   7578:        if test -n "$hardcode_libdir_flag_spec"; then
                   7579:          if test -n "$hardcode_libdir_separator"; then
                   7580:            if test -z "$hardcode_libdirs"; then
                   7581:              hardcode_libdirs="$libdir"
                   7582:            else
                   7583:              # Just accumulate the unique libdirs.
                   7584:              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
                   7585:              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                   7586:                ;;
                   7587:              *)
                   7588:                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                   7589:                ;;
                   7590:              esac
                   7591:            fi
                   7592:          else
                   7593:            eval flag=\"$hardcode_libdir_flag_spec\"
                   7594:            rpath="$rpath $flag"
                   7595:          fi
                   7596:        elif test -n "$runpath_var"; then
                   7597:          case "$perm_rpath " in
                   7598:          *" $libdir "*) ;;
                   7599:          *) perm_rpath="$perm_rpath $libdir" ;;
                   7600:          esac
                   7601:        fi
                   7602:        case $host in
                   7603:        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
                   7604:          testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
                   7605:          case :$dllsearchpath: in
                   7606:          *":$libdir:"*) ;;
                   7607:          ::) dllsearchpath=$libdir;;
                   7608:          *) dllsearchpath="$dllsearchpath:$libdir";;
                   7609:          esac
                   7610:          case :$dllsearchpath: in
                   7611:          *":$testbindir:"*) ;;
                   7612:          ::) dllsearchpath=$testbindir;;
                   7613:          *) dllsearchpath="$dllsearchpath:$testbindir";;
                   7614:          esac
                   7615:          ;;
                   7616:        esac
                   7617:       done
                   7618:       # Substitute the hardcoded libdirs into the rpath.
                   7619:       if test -n "$hardcode_libdir_separator" &&
                   7620:         test -n "$hardcode_libdirs"; then
                   7621:        libdir="$hardcode_libdirs"
                   7622:        eval rpath=\" $hardcode_libdir_flag_spec\"
                   7623:       fi
                   7624:       compile_rpath="$rpath"
                   7625: 
                   7626:       rpath=
                   7627:       hardcode_libdirs=
                   7628:       for libdir in $finalize_rpath; do
                   7629:        if test -n "$hardcode_libdir_flag_spec"; then
                   7630:          if test -n "$hardcode_libdir_separator"; then
                   7631:            if test -z "$hardcode_libdirs"; then
                   7632:              hardcode_libdirs="$libdir"
                   7633:            else
                   7634:              # Just accumulate the unique libdirs.
                   7635:              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
                   7636:              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                   7637:                ;;
                   7638:              *)
                   7639:                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
                   7640:                ;;
                   7641:              esac
                   7642:            fi
                   7643:          else
                   7644:            eval flag=\"$hardcode_libdir_flag_spec\"
                   7645:            rpath="$rpath $flag"
                   7646:          fi
                   7647:        elif test -n "$runpath_var"; then
                   7648:          case "$finalize_perm_rpath " in
                   7649:          *" $libdir "*) ;;
                   7650:          *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
                   7651:          esac
                   7652:        fi
                   7653:       done
                   7654:       # Substitute the hardcoded libdirs into the rpath.
                   7655:       if test -n "$hardcode_libdir_separator" &&
                   7656:         test -n "$hardcode_libdirs"; then
                   7657:        libdir="$hardcode_libdirs"
                   7658:        eval rpath=\" $hardcode_libdir_flag_spec\"
                   7659:       fi
                   7660:       finalize_rpath="$rpath"
                   7661: 
                   7662:       if test -n "$libobjs" && test "$build_old_libs" = yes; then
                   7663:        # Transform all the library objects into standard objects.
                   7664:        compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
                   7665:        finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
                   7666:       fi
                   7667: 
                   7668:       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
                   7669: 
                   7670:       # template prelinking step
                   7671:       if test -n "$prelink_cmds"; then
                   7672:        func_execute_cmds "$prelink_cmds" 'exit $?'
                   7673:       fi
                   7674: 
                   7675:       wrappers_required=yes
                   7676:       case $host in
                   7677:       *cygwin* | *mingw* )
                   7678:         if test "$build_libtool_libs" != yes; then
                   7679:           wrappers_required=no
                   7680:         fi
                   7681:         ;;
                   7682:       *cegcc)
                   7683:         # Disable wrappers for cegcc, we are cross compiling anyway.
                   7684:         wrappers_required=no
                   7685:         ;;
                   7686:       *)
                   7687:         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
                   7688:           wrappers_required=no
                   7689:         fi
                   7690:         ;;
                   7691:       esac
                   7692:       if test "$wrappers_required" = no; then
                   7693:        # Replace the output file specification.
                   7694:        compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
                   7695:        link_command="$compile_command$compile_rpath"
                   7696: 
                   7697:        # We have no uninstalled library dependencies, so finalize right now.
                   7698:        exit_status=0
                   7699:        func_show_eval "$link_command" 'exit_status=$?'
                   7700: 
                   7701:        # Delete the generated files.
                   7702:        if test -f "$output_objdir/${outputname}S.${objext}"; then
                   7703:          func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
                   7704:        fi
                   7705: 
                   7706:        exit $exit_status
                   7707:       fi
                   7708: 
                   7709:       if test -n "$compile_shlibpath$finalize_shlibpath"; then
                   7710:        compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
                   7711:       fi
                   7712:       if test -n "$finalize_shlibpath"; then
                   7713:        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
                   7714:       fi
                   7715: 
                   7716:       compile_var=
                   7717:       finalize_var=
                   7718:       if test -n "$runpath_var"; then
                   7719:        if test -n "$perm_rpath"; then
                   7720:          # We should set the runpath_var.
                   7721:          rpath=
                   7722:          for dir in $perm_rpath; do
                   7723:            rpath="$rpath$dir:"
                   7724:          done
                   7725:          compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
                   7726:        fi
                   7727:        if test -n "$finalize_perm_rpath"; then
                   7728:          # We should set the runpath_var.
                   7729:          rpath=
                   7730:          for dir in $finalize_perm_rpath; do
                   7731:            rpath="$rpath$dir:"
                   7732:          done
                   7733:          finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
                   7734:        fi
                   7735:       fi
                   7736: 
                   7737:       if test "$no_install" = yes; then
                   7738:        # We don't need to create a wrapper script.
                   7739:        link_command="$compile_var$compile_command$compile_rpath"
                   7740:        # Replace the output file specification.
                   7741:        link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
                   7742:        # Delete the old output file.
                   7743:        $opt_dry_run || $RM $output
                   7744:        # Link the executable and exit
                   7745:        func_show_eval "$link_command" 'exit $?'
                   7746:        exit $EXIT_SUCCESS
                   7747:       fi
                   7748: 
                   7749:       if test "$hardcode_action" = relink; then
                   7750:        # Fast installation is not supported
                   7751:        link_command="$compile_var$compile_command$compile_rpath"
                   7752:        relink_command="$finalize_var$finalize_command$finalize_rpath"
                   7753: 
                   7754:        func_warning "this platform does not like uninstalled shared libraries"
                   7755:        func_warning "\`$output' will be relinked during installation"
                   7756:       else
                   7757:        if test "$fast_install" != no; then
                   7758:          link_command="$finalize_var$compile_command$finalize_rpath"
                   7759:          if test "$fast_install" = yes; then
                   7760:            relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
                   7761:          else
                   7762:            # fast_install is set to needless
                   7763:            relink_command=
                   7764:          fi
                   7765:        else
                   7766:          link_command="$compile_var$compile_command$compile_rpath"
                   7767:          relink_command="$finalize_var$finalize_command$finalize_rpath"
                   7768:        fi
                   7769:       fi
                   7770: 
                   7771:       # Replace the output file specification.
                   7772:       link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
                   7773: 
                   7774:       # Delete the old output files.
                   7775:       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
                   7776: 
                   7777:       func_show_eval "$link_command" 'exit $?'
                   7778: 
                   7779:       # Now create the wrapper script.
                   7780:       func_verbose "creating $output"
                   7781: 
                   7782:       # Quote the relink command for shipping.
                   7783:       if test -n "$relink_command"; then
                   7784:        # Preserve any variables that may affect compiler behavior
                   7785:        for var in $variables_saved_for_relink; do
                   7786:          if eval test -z \"\${$var+set}\"; then
                   7787:            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
                   7788:          elif eval var_value=\$$var; test -z "$var_value"; then
                   7789:            relink_command="$var=; export $var; $relink_command"
                   7790:          else
                   7791:            func_quote_for_eval "$var_value"
                   7792:            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
                   7793:          fi
                   7794:        done
                   7795:        relink_command="(cd `pwd`; $relink_command)"
                   7796:        relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
                   7797:       fi
                   7798: 
                   7799:       # Quote $ECHO for shipping.
                   7800:       if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
                   7801:        case $progpath in
                   7802:        [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
                   7803:        *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
                   7804:        esac
                   7805:        qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
                   7806:       else
                   7807:        qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
                   7808:       fi
                   7809: 
                   7810:       # Only actually do things if not in dry run mode.
                   7811:       $opt_dry_run || {
                   7812:        # win32 will think the script is a binary if it has
                   7813:        # a .exe suffix, so we strip it off here.
                   7814:        case $output in
                   7815:          *.exe) func_stripname '' '.exe' "$output"
                   7816:                 output=$func_stripname_result ;;
                   7817:        esac
                   7818:        # test for cygwin because mv fails w/o .exe extensions
                   7819:        case $host in
                   7820:          *cygwin*)
                   7821:            exeext=.exe
                   7822:            func_stripname '' '.exe' "$outputname"
                   7823:            outputname=$func_stripname_result ;;
                   7824:          *) exeext= ;;
                   7825:        esac
                   7826:        case $host in
                   7827:          *cygwin* | *mingw* )
                   7828:            func_dirname_and_basename "$output" "" "."
                   7829:            output_name=$func_basename_result
                   7830:            output_path=$func_dirname_result
                   7831:            cwrappersource="$output_path/$objdir/lt-$output_name.c"
                   7832:            cwrapper="$output_path/$output_name.exe"
                   7833:            $RM $cwrappersource $cwrapper
                   7834:            trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
                   7835: 
                   7836:            func_emit_cwrapperexe_src > $cwrappersource
                   7837: 
                   7838:            # The wrapper executable is built using the $host compiler,
                   7839:            # because it contains $host paths and files. If cross-
                   7840:            # compiling, it, like the target executable, must be
                   7841:            # executed on the $host or under an emulation environment.
                   7842:            $opt_dry_run || {
                   7843:              $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
                   7844:              $STRIP $cwrapper
                   7845:            }
                   7846: 
                   7847:            # Now, create the wrapper script for func_source use:
                   7848:            func_ltwrapper_scriptname $cwrapper
                   7849:            $RM $func_ltwrapper_scriptname_result
                   7850:            trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
                   7851:            $opt_dry_run || {
                   7852:              # note: this script will not be executed, so do not chmod.
                   7853:              if test "x$build" = "x$host" ; then
                   7854:                $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
                   7855:              else
                   7856:                func_emit_wrapper no > $func_ltwrapper_scriptname_result
                   7857:              fi
                   7858:            }
                   7859:          ;;
                   7860:          * )
                   7861:            $RM $output
                   7862:            trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
                   7863: 
                   7864:            func_emit_wrapper no > $output
                   7865:            chmod +x $output
                   7866:          ;;
                   7867:        esac
                   7868:       }
                   7869:       exit $EXIT_SUCCESS
                   7870:       ;;
                   7871:     esac
                   7872: 
                   7873:     # See if we need to build an old-fashioned archive.
                   7874:     for oldlib in $oldlibs; do
                   7875: 
                   7876:       if test "$build_libtool_libs" = convenience; then
                   7877:        oldobjs="$libobjs_save $symfileobj"
                   7878:        addlibs="$convenience"
                   7879:        build_libtool_libs=no
                   7880:       else
                   7881:        if test "$build_libtool_libs" = module; then
                   7882:          oldobjs="$libobjs_save"
                   7883:          build_libtool_libs=no
                   7884:        else
                   7885:          oldobjs="$old_deplibs $non_pic_objects"
                   7886:          if test "$preload" = yes && test -f "$symfileobj"; then
                   7887:            oldobjs="$oldobjs $symfileobj"
                   7888:          fi
                   7889:        fi
                   7890:        addlibs="$old_convenience"
                   7891:       fi
                   7892: 
                   7893:       if test -n "$addlibs"; then
                   7894:        gentop="$output_objdir/${outputname}x"
                   7895:        generated="$generated $gentop"
                   7896: 
                   7897:        func_extract_archives $gentop $addlibs
                   7898:        oldobjs="$oldobjs $func_extract_archives_result"
                   7899:       fi
                   7900: 
                   7901:       # Do each command in the archive commands.
                   7902:       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
                   7903:        cmds=$old_archive_from_new_cmds
                   7904:       else
                   7905: 
                   7906:        # Add any objects from preloaded convenience libraries
                   7907:        if test -n "$dlprefiles"; then
                   7908:          gentop="$output_objdir/${outputname}x"
                   7909:          generated="$generated $gentop"
                   7910: 
                   7911:          func_extract_archives $gentop $dlprefiles
                   7912:          oldobjs="$oldobjs $func_extract_archives_result"
                   7913:        fi
                   7914: 
                   7915:        # POSIX demands no paths to be encoded in archives.  We have
                   7916:        # to avoid creating archives with duplicate basenames if we
                   7917:        # might have to extract them afterwards, e.g., when creating a
                   7918:        # static archive out of a convenience library, or when linking
                   7919:        # the entirety of a libtool archive into another (currently
                   7920:        # not supported by libtool).
                   7921:        if (for obj in $oldobjs
                   7922:            do
                   7923:              func_basename "$obj"
                   7924:              $ECHO "$func_basename_result"
                   7925:            done | sort | sort -uc >/dev/null 2>&1); then
                   7926:          :
                   7927:        else
                   7928:          $ECHO "copying selected object files to avoid basename conflicts..."
                   7929:          gentop="$output_objdir/${outputname}x"
                   7930:          generated="$generated $gentop"
                   7931:          func_mkdir_p "$gentop"
                   7932:          save_oldobjs=$oldobjs
                   7933:          oldobjs=
                   7934:          counter=1
                   7935:          for obj in $save_oldobjs
                   7936:          do
                   7937:            func_basename "$obj"
                   7938:            objbase="$func_basename_result"
                   7939:            case " $oldobjs " in
                   7940:            " ") oldobjs=$obj ;;
                   7941:            *[\ /]"$objbase "*)
                   7942:              while :; do
                   7943:                # Make sure we don't pick an alternate name that also
                   7944:                # overlaps.
                   7945:                newobj=lt$counter-$objbase
                   7946:                func_arith $counter + 1
                   7947:                counter=$func_arith_result
                   7948:                case " $oldobjs " in
                   7949:                *[\ /]"$newobj "*) ;;
                   7950:                *) if test ! -f "$gentop/$newobj"; then break; fi ;;
                   7951:                esac
                   7952:              done
                   7953:              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
                   7954:              oldobjs="$oldobjs $gentop/$newobj"
                   7955:              ;;
                   7956:            *) oldobjs="$oldobjs $obj" ;;
                   7957:            esac
                   7958:          done
                   7959:        fi
                   7960:        eval cmds=\"$old_archive_cmds\"
                   7961: 
                   7962:        func_len " $cmds"
                   7963:        len=$func_len_result
                   7964:        if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
                   7965:          cmds=$old_archive_cmds
                   7966:        else
                   7967:          # the command line is too long to link in one step, link in parts
                   7968:          func_verbose "using piecewise archive linking..."
                   7969:          save_RANLIB=$RANLIB
                   7970:          RANLIB=:
                   7971:          objlist=
                   7972:          concat_cmds=
                   7973:          save_oldobjs=$oldobjs
                   7974:          oldobjs=
                   7975:          # Is there a better way of finding the last object in the list?
                   7976:          for obj in $save_oldobjs
                   7977:          do
                   7978:            last_oldobj=$obj
                   7979:          done
                   7980:          eval test_cmds=\"$old_archive_cmds\"
                   7981:          func_len " $test_cmds"
                   7982:          len0=$func_len_result
                   7983:          len=$len0
                   7984:          for obj in $save_oldobjs
                   7985:          do
                   7986:            func_len " $obj"
                   7987:            func_arith $len + $func_len_result
                   7988:            len=$func_arith_result
                   7989:            func_append objlist " $obj"
                   7990:            if test "$len" -lt "$max_cmd_len"; then
                   7991:              :
                   7992:            else
                   7993:              # the above command should be used before it gets too long
                   7994:              oldobjs=$objlist
                   7995:              if test "$obj" = "$last_oldobj" ; then
                   7996:                RANLIB=$save_RANLIB
                   7997:              fi
                   7998:              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
                   7999:              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
                   8000:              objlist=
                   8001:              len=$len0
                   8002:            fi
                   8003:          done
                   8004:          RANLIB=$save_RANLIB
                   8005:          oldobjs=$objlist
                   8006:          if test "X$oldobjs" = "X" ; then
                   8007:            eval cmds=\"\$concat_cmds\"
                   8008:          else
                   8009:            eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
                   8010:          fi
                   8011:        fi
                   8012:       fi
                   8013:       func_execute_cmds "$cmds" 'exit $?'
                   8014:     done
                   8015: 
                   8016:     test -n "$generated" && \
                   8017:       func_show_eval "${RM}r$generated"
                   8018: 
                   8019:     # Now create the libtool archive.
                   8020:     case $output in
                   8021:     *.la)
                   8022:       old_library=
                   8023:       test "$build_old_libs" = yes && old_library="$libname.$libext"
                   8024:       func_verbose "creating $output"
                   8025: 
                   8026:       # Preserve any variables that may affect compiler behavior
                   8027:       for var in $variables_saved_for_relink; do
                   8028:        if eval test -z \"\${$var+set}\"; then
                   8029:          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
                   8030:        elif eval var_value=\$$var; test -z "$var_value"; then
                   8031:          relink_command="$var=; export $var; $relink_command"
                   8032:        else
                   8033:          func_quote_for_eval "$var_value"
                   8034:          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
                   8035:        fi
                   8036:       done
                   8037:       # Quote the link command for shipping.
                   8038:       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
                   8039:       relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
                   8040:       if test "$hardcode_automatic" = yes ; then
                   8041:        relink_command=
                   8042:       fi
                   8043: 
                   8044:       # Only create the output if not a dry run.
                   8045:       $opt_dry_run || {
                   8046:        for installed in no yes; do
                   8047:          if test "$installed" = yes; then
                   8048:            if test -z "$install_libdir"; then
                   8049:              break
                   8050:            fi
                   8051:            output="$output_objdir/$outputname"i
                   8052:            # Replace all uninstalled libtool libraries with the installed ones
                   8053:            newdependency_libs=
                   8054:            for deplib in $dependency_libs; do
                   8055:              case $deplib in
                   8056:              *.la)
                   8057:                func_basename "$deplib"
                   8058:                name="$func_basename_result"
                   8059:                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                   8060:                test -z "$libdir" && \
                   8061:                  func_fatal_error "\`$deplib' is not a valid libtool archive"
                   8062:                newdependency_libs="$newdependency_libs $libdir/$name"
                   8063:                ;;
                   8064:              *) newdependency_libs="$newdependency_libs $deplib" ;;
                   8065:              esac
                   8066:            done
                   8067:            dependency_libs="$newdependency_libs"
                   8068:            newdlfiles=
                   8069: 
                   8070:            for lib in $dlfiles; do
                   8071:              case $lib in
                   8072:              *.la)
                   8073:                func_basename "$lib"
                   8074:                name="$func_basename_result"
                   8075:                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
                   8076:                test -z "$libdir" && \
                   8077:                  func_fatal_error "\`$lib' is not a valid libtool archive"
                   8078:                newdlfiles="$newdlfiles $libdir/$name"
                   8079:                ;;
                   8080:              *) newdlfiles="$newdlfiles $lib" ;;
                   8081:              esac
                   8082:            done
                   8083:            dlfiles="$newdlfiles"
                   8084:            newdlprefiles=
                   8085:            for lib in $dlprefiles; do
                   8086:              case $lib in
                   8087:              *.la)
                   8088:                # Only pass preopened files to the pseudo-archive (for
                   8089:                # eventual linking with the app. that links it) if we
                   8090:                # didn't already link the preopened objects directly into
                   8091:                # the library:
                   8092:                func_basename "$lib"
                   8093:                name="$func_basename_result"
                   8094:                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
                   8095:                test -z "$libdir" && \
                   8096:                  func_fatal_error "\`$lib' is not a valid libtool archive"
                   8097:                newdlprefiles="$newdlprefiles $libdir/$name"
                   8098:                ;;
                   8099:              esac
                   8100:            done
                   8101:            dlprefiles="$newdlprefiles"
                   8102:          else
                   8103:            newdlfiles=
                   8104:            for lib in $dlfiles; do
                   8105:              case $lib in
                   8106:                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                   8107:                *) abs=`pwd`"/$lib" ;;
                   8108:              esac
                   8109:              newdlfiles="$newdlfiles $abs"
                   8110:            done
                   8111:            dlfiles="$newdlfiles"
                   8112:            newdlprefiles=
                   8113:            for lib in $dlprefiles; do
                   8114:              case $lib in
                   8115:                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                   8116:                *) abs=`pwd`"/$lib" ;;
                   8117:              esac
                   8118:              newdlprefiles="$newdlprefiles $abs"
                   8119:            done
                   8120:            dlprefiles="$newdlprefiles"
                   8121:          fi
                   8122:          $RM $output
                   8123:          # place dlname in correct position for cygwin
                   8124:          tdlname=$dlname
                   8125:          case $host,$output,$installed,$module,$dlname in
                   8126:            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
                   8127:          esac
                   8128:          $ECHO > $output "\
                   8129: # $outputname - a libtool library file
                   8130: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
                   8131: #
                   8132: # Please DO NOT delete this file!
                   8133: # It is necessary for linking the library.
                   8134: 
                   8135: # The name that we can dlopen(3).
                   8136: dlname='$tdlname'
                   8137: 
                   8138: # Names of this library.
                   8139: library_names='$library_names'
                   8140: 
                   8141: # The name of the static archive.
                   8142: old_library='$old_library'
                   8143: 
                   8144: # Linker flags that can not go in dependency_libs.
                   8145: inherited_linker_flags='$new_inherited_linker_flags'
                   8146: 
                   8147: # Libraries that this one depends upon.
                   8148: dependency_libs='$dependency_libs'
                   8149: 
                   8150: # Names of additional weak libraries provided by this library
                   8151: weak_library_names='$weak_libs'
                   8152: 
                   8153: # Version information for $libname.
                   8154: current=$current
                   8155: age=$age
                   8156: revision=$revision
                   8157: 
                   8158: # Is this an already installed library?
                   8159: installed=$installed
                   8160: 
                   8161: # Should we warn about portability when linking against -modules?
                   8162: shouldnotlink=$module
                   8163: 
                   8164: # Files to dlopen/dlpreopen
                   8165: dlopen='$dlfiles'
                   8166: dlpreopen='$dlprefiles'
                   8167: 
                   8168: # Directory that this library needs to be installed in:
                   8169: libdir='$install_libdir'"
                   8170:          if test "$installed" = no && test "$need_relink" = yes; then
                   8171:            $ECHO >> $output "\
                   8172: relink_command=\"$relink_command\""
                   8173:          fi
                   8174:        done
                   8175:       }
                   8176: 
                   8177:       # Do a symbolic link so that the libtool archive can be found in
                   8178:       # LD_LIBRARY_PATH before the program is installed.
                   8179:       func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
                   8180:       ;;
                   8181:     esac
                   8182:     exit $EXIT_SUCCESS
                   8183: }
                   8184: 
                   8185: { test "$mode" = link || test "$mode" = relink; } &&
                   8186:     func_mode_link ${1+"$@"}
                   8187: 
                   8188: 
                   8189: # func_mode_uninstall arg...
                   8190: func_mode_uninstall ()
                   8191: {
                   8192:     $opt_debug
                   8193:     RM="$nonopt"
                   8194:     files=
                   8195:     rmforce=
                   8196:     exit_status=0
                   8197: 
                   8198:     # This variable tells wrapper scripts just to set variables rather
                   8199:     # than running their programs.
                   8200:     libtool_install_magic="$magic"
                   8201: 
                   8202:     for arg
                   8203:     do
                   8204:       case $arg in
                   8205:       -f) RM="$RM $arg"; rmforce=yes ;;
                   8206:       -*) RM="$RM $arg" ;;
                   8207:       *) files="$files $arg" ;;
                   8208:       esac
                   8209:     done
                   8210: 
                   8211:     test -z "$RM" && \
                   8212:       func_fatal_help "you must specify an RM program"
                   8213: 
                   8214:     rmdirs=
                   8215: 
                   8216:     origobjdir="$objdir"
                   8217:     for file in $files; do
                   8218:       func_dirname "$file" "" "."
                   8219:       dir="$func_dirname_result"
                   8220:       if test "X$dir" = X.; then
                   8221:        objdir="$origobjdir"
                   8222:       else
                   8223:        objdir="$dir/$origobjdir"
                   8224:       fi
                   8225:       func_basename "$file"
                   8226:       name="$func_basename_result"
                   8227:       test "$mode" = uninstall && objdir="$dir"
                   8228: 
                   8229:       # Remember objdir for removal later, being careful to avoid duplicates
                   8230:       if test "$mode" = clean; then
                   8231:        case " $rmdirs " in
                   8232:          *" $objdir "*) ;;
                   8233:          *) rmdirs="$rmdirs $objdir" ;;
                   8234:        esac
                   8235:       fi
                   8236: 
                   8237:       # Don't error if the file doesn't exist and rm -f was used.
                   8238:       if { test -L "$file"; } >/dev/null 2>&1 ||
                   8239:         { test -h "$file"; } >/dev/null 2>&1 ||
                   8240:         test -f "$file"; then
                   8241:        :
                   8242:       elif test -d "$file"; then
                   8243:        exit_status=1
                   8244:        continue
                   8245:       elif test "$rmforce" = yes; then
                   8246:        continue
                   8247:       fi
                   8248: 
                   8249:       rmfiles="$file"
                   8250: 
                   8251:       case $name in
                   8252:       *.la)
                   8253:        # Possibly a libtool archive, so verify it.
                   8254:        if func_lalib_p "$file"; then
                   8255:          func_source $dir/$name
                   8256: 
                   8257:          # Delete the libtool libraries and symlinks.
                   8258:          for n in $library_names; do
                   8259:            rmfiles="$rmfiles $objdir/$n"
                   8260:          done
                   8261:          test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
                   8262: 
                   8263:          case "$mode" in
                   8264:          clean)
                   8265:            case "  $library_names " in
                   8266:            # "  " in the beginning catches empty $dlname
                   8267:            *" $dlname "*) ;;
                   8268:            *) rmfiles="$rmfiles $objdir/$dlname" ;;
                   8269:            esac
                   8270:            test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
                   8271:            ;;
                   8272:          uninstall)
                   8273:            if test -n "$library_names"; then
                   8274:              # Do each command in the postuninstall commands.
                   8275:              func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
                   8276:            fi
                   8277: 
                   8278:            if test -n "$old_library"; then
                   8279:              # Do each command in the old_postuninstall commands.
                   8280:              func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
                   8281:            fi
                   8282:            # FIXME: should reinstall the best remaining shared library.
                   8283:            ;;
                   8284:          esac
                   8285:        fi
                   8286:        ;;
                   8287: 
                   8288:       *.lo)
                   8289:        # Possibly a libtool object, so verify it.
                   8290:        if func_lalib_p "$file"; then
                   8291: 
                   8292:          # Read the .lo file
                   8293:          func_source $dir/$name
                   8294: 
                   8295:          # Add PIC object to the list of files to remove.
                   8296:          if test -n "$pic_object" &&
                   8297:             test "$pic_object" != none; then
                   8298:            rmfiles="$rmfiles $dir/$pic_object"
                   8299:          fi
                   8300: 
                   8301:          # Add non-PIC object to the list of files to remove.
                   8302:          if test -n "$non_pic_object" &&
                   8303:             test "$non_pic_object" != none; then
                   8304:            rmfiles="$rmfiles $dir/$non_pic_object"
                   8305:          fi
                   8306:        fi
                   8307:        ;;
                   8308: 
                   8309:       *)
                   8310:        if test "$mode" = clean ; then
                   8311:          noexename=$name
                   8312:          case $file in
                   8313:          *.exe)
                   8314:            func_stripname '' '.exe' "$file"
                   8315:            file=$func_stripname_result
                   8316:            func_stripname '' '.exe' "$name"
                   8317:            noexename=$func_stripname_result
                   8318:            # $file with .exe has already been added to rmfiles,
                   8319:            # add $file without .exe
                   8320:            rmfiles="$rmfiles $file"
                   8321:            ;;
                   8322:          esac
                   8323:          # Do a test to see if this is a libtool program.
                   8324:          if func_ltwrapper_p "$file"; then
                   8325:            if func_ltwrapper_executable_p "$file"; then
                   8326:              func_ltwrapper_scriptname "$file"
                   8327:              relink_command=
                   8328:              func_source $func_ltwrapper_scriptname_result
                   8329:              rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
                   8330:            else
                   8331:              relink_command=
                   8332:              func_source $dir/$noexename
                   8333:            fi
                   8334: 
                   8335:            # note $name still contains .exe if it was in $file originally
                   8336:            # as does the version of $file that was added into $rmfiles
                   8337:            rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
                   8338:            if test "$fast_install" = yes && test -n "$relink_command"; then
                   8339:              rmfiles="$rmfiles $objdir/lt-$name"
                   8340:            fi
                   8341:            if test "X$noexename" != "X$name" ; then
                   8342:              rmfiles="$rmfiles $objdir/lt-${noexename}.c"
                   8343:            fi
                   8344:          fi
                   8345:        fi
                   8346:        ;;
                   8347:       esac
                   8348:       func_show_eval "$RM $rmfiles" 'exit_status=1'
                   8349:     done
                   8350:     objdir="$origobjdir"
                   8351: 
                   8352:     # Try to remove the ${objdir}s in the directories where we deleted files
                   8353:     for dir in $rmdirs; do
                   8354:       if test -d "$dir"; then
                   8355:        func_show_eval "rmdir $dir >/dev/null 2>&1"
                   8356:       fi
                   8357:     done
                   8358: 
                   8359:     exit $exit_status
                   8360: }
                   8361: 
                   8362: { test "$mode" = uninstall || test "$mode" = clean; } &&
                   8363:     func_mode_uninstall ${1+"$@"}
                   8364: 
                   8365: test -z "$mode" && {
                   8366:   help="$generic_help"
                   8367:   func_fatal_help "you must specify a MODE"
                   8368: }
                   8369: 
                   8370: test -z "$exec_cmd" && \
                   8371:   func_fatal_help "invalid operation mode \`$mode'"
                   8372: 
                   8373: if test -n "$exec_cmd"; then
                   8374:   eval exec "$exec_cmd"
                   8375:   exit $EXIT_FAILURE
                   8376: fi
                   8377: 
                   8378: exit $exit_status
                   8379: 
                   8380: 
                   8381: # The TAGs below are defined such that we never get into a situation
                   8382: # in which we disable both kinds of libraries.  Given conflicting
                   8383: # choices, we go for a static library, that is the most portable,
                   8384: # since we can't tell whether shared libraries were disabled because
                   8385: # the user asked for that or because the platform doesn't support
                   8386: # them.  This is particularly important on AIX, because we don't
                   8387: # support having both static and shared libraries enabled at the same
                   8388: # time on that platform, so we default to a shared-only configuration.
                   8389: # If a disable-shared tag is given, we'll fallback to a static-only
                   8390: # configuration.  But we'll never go from static-only to shared-only.
                   8391: 
                   8392: # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
                   8393: build_libtool_libs=no
                   8394: build_old_libs=yes
                   8395: # ### END LIBTOOL TAG CONFIG: disable-shared
                   8396: 
                   8397: # ### BEGIN LIBTOOL TAG CONFIG: disable-static
                   8398: build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
                   8399: # ### END LIBTOOL TAG CONFIG: disable-static
                   8400: 
                   8401: # Local Variables:
                   8402: # mode:shell-script
                   8403: # sh-indentation:2
                   8404: # End:
                   8405: # vi:sw=2
                   8406: 

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>