Annotation of embedaddon/coova-chilli/INSTALL, revision 1.1

1.1     ! misho       1: Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
        !             2: Foundation, Inc.
        !             3: 
        !             4:    This file is free documentation; the Free Software Foundation gives
        !             5: unlimited permission to copy, distribute and modify it.
        !             6: 
        !             7: Basic Installation
        !             8: ==================
        !             9: 
        !            10:    These are generic installation instructions.
        !            11: 
        !            12:    The `configure' shell script attempts to guess correct values for
        !            13: various system-dependent variables used during compilation.  It uses
        !            14: those values to create a `Makefile' in each directory of the package.
        !            15: It may also create one or more `.h' files containing system-dependent
        !            16: definitions.  Finally, it creates a shell script `config.status' that
        !            17: you can run in the future to recreate the current configuration, and a
        !            18: file `config.log' containing compiler output (useful mainly for
        !            19: debugging `configure').
        !            20: 
        !            21:    It can also use an optional file (typically called `config.cache'
        !            22: and enabled with `--cache-file=config.cache' or simply `-C') that saves
        !            23: the results of its tests to speed up reconfiguring.  (Caching is
        !            24: disabled by default to prevent problems with accidental use of stale
        !            25: cache files.)
        !            26: 
        !            27:    If you need to do unusual things to compile the package, please try
        !            28: to figure out how `configure' could check whether to do them, and mail
        !            29: diffs or instructions to the address given in the `README' so they can
        !            30: be considered for the next release.  If you are using the cache, and at
        !            31: some point `config.cache' contains results you don't want to keep, you
        !            32: may remove or edit it.
        !            33: 
        !            34:    The file `configure.ac' (or `configure.in') is used to create
        !            35: `configure' by a program called `autoconf'.  You only need
        !            36: `configure.ac' if you want to change it or regenerate `configure' using
        !            37: a newer version of `autoconf'.
        !            38: 
        !            39: The simplest way to compile this package is:
        !            40: 
        !            41:   1. `cd' to the directory containing the package's source code and type
        !            42:      `./configure' to configure the package for your system.  If you're
        !            43:      using `csh' on an old version of System V, you might need to type
        !            44:      `sh ./configure' instead to prevent `csh' from trying to execute
        !            45:      `configure' itself.
        !            46: 
        !            47:      Running `configure' takes awhile.  While running, it prints some
        !            48:      messages telling which features it is checking for.
        !            49: 
        !            50:   2. Type `make' to compile the package.
        !            51: 
        !            52:   3. Optionally, type `make check' to run any self-tests that come with
        !            53:      the package.
        !            54: 
        !            55:   4. Type `make install' to install the programs and any data files and
        !            56:      documentation.
        !            57: 
        !            58:   5. You can remove the program binaries and object files from the
        !            59:      source code directory by typing `make clean'.  To also remove the
        !            60:      files that `configure' created (so you can compile the package for
        !            61:      a different kind of computer), type `make distclean'.  There is
        !            62:      also a `make maintainer-clean' target, but that is intended mainly
        !            63:      for the package's developers.  If you use it, you may have to get
        !            64:      all sorts of other programs in order to regenerate files that came
        !            65:      with the distribution.
        !            66: 
        !            67: Compilers and Options
        !            68: =====================
        !            69: 
        !            70:    Some systems require unusual options for compilation or linking that
        !            71: the `configure' script does not know about.  Run `./configure --help'
        !            72: for details on some of the pertinent environment variables.
        !            73: 
        !            74:    You can give `configure' initial values for configuration parameters
        !            75: by setting variables in the command line or in the environment.  Here
        !            76: is an example:
        !            77: 
        !            78:      ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
        !            79: 
        !            80:    *Note Defining Variables::, for more details.
        !            81: 
        !            82: Compiling For Multiple Architectures
        !            83: ====================================
        !            84: 
        !            85:    You can compile the package for more than one kind of computer at the
        !            86: same time, by placing the object files for each architecture in their
        !            87: own directory.  To do this, you must use a version of `make' that
        !            88: supports the `VPATH' variable, such as GNU `make'.  `cd' to the
        !            89: directory where you want the object files and executables to go and run
        !            90: the `configure' script.  `configure' automatically checks for the
        !            91: source code in the directory that `configure' is in and in `..'.
        !            92: 
        !            93:    If you have to use a `make' that does not support the `VPATH'
        !            94: variable, you have to compile the package for one architecture at a
        !            95: time in the source code directory.  After you have installed the
        !            96: package for one architecture, use `make distclean' before reconfiguring
        !            97: for another architecture.
        !            98: 
        !            99: Installation Names
        !           100: ==================
        !           101: 
        !           102:    By default, `make install' will install the package's files in
        !           103: `/usr/local/bin', `/usr/local/man', etc.  You can specify an
        !           104: installation prefix other than `/usr/local' by giving `configure' the
        !           105: option `--prefix=PATH'.
        !           106: 
        !           107:    You can specify separate installation prefixes for
        !           108: architecture-specific files and architecture-independent files.  If you
        !           109: give `configure' the option `--exec-prefix=PATH', the package will use
        !           110: PATH as the prefix for installing programs and libraries.
        !           111: Documentation and other data files will still use the regular prefix.
        !           112: 
        !           113:    In addition, if you use an unusual directory layout you can give
        !           114: options like `--bindir=PATH' to specify different values for particular
        !           115: kinds of files.  Run `configure --help' for a list of the directories
        !           116: you can set and what kinds of files go in them.
        !           117: 
        !           118:    If the package supports it, you can cause programs to be installed
        !           119: with an extra prefix or suffix on their names by giving `configure' the
        !           120: option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
        !           121: 
        !           122: Optional Features
        !           123: =================
        !           124: 
        !           125:    Some packages pay attention to `--enable-FEATURE' options to
        !           126: `configure', where FEATURE indicates an optional part of the package.
        !           127: They may also pay attention to `--with-PACKAGE' options, where PACKAGE
        !           128: is something like `gnu-as' or `x' (for the X Window System).  The
        !           129: `README' should mention any `--enable-' and `--with-' options that the
        !           130: package recognizes.
        !           131: 
        !           132:    For packages that use the X Window System, `configure' can usually
        !           133: find the X include and library files automatically, but if it doesn't,
        !           134: you can use the `configure' options `--x-includes=DIR' and
        !           135: `--x-libraries=DIR' to specify their locations.
        !           136: 
        !           137: Specifying the System Type
        !           138: ==========================
        !           139: 
        !           140:    There may be some features `configure' cannot figure out
        !           141: automatically, but needs to determine by the type of machine the package
        !           142: will run on.  Usually, assuming the package is built to be run on the
        !           143: _same_ architectures, `configure' can figure that out, but if it prints
        !           144: a message saying it cannot guess the machine type, give it the
        !           145: `--build=TYPE' option.  TYPE can either be a short name for the system
        !           146: type, such as `sun4', or a canonical name which has the form:
        !           147: 
        !           148:      CPU-COMPANY-SYSTEM
        !           149: 
        !           150: where SYSTEM can have one of these forms:
        !           151: 
        !           152:      OS KERNEL-OS
        !           153: 
        !           154:    See the file `config.sub' for the possible values of each field.  If
        !           155: `config.sub' isn't included in this package, then this package doesn't
        !           156: need to know the machine type.
        !           157: 
        !           158:    If you are _building_ compiler tools for cross-compiling, you should
        !           159: use the `--target=TYPE' option to select the type of system they will
        !           160: produce code for.
        !           161: 
        !           162:    If you want to _use_ a cross compiler, that generates code for a
        !           163: platform different from the build platform, you should specify the
        !           164: "host" platform (i.e., that on which the generated programs will
        !           165: eventually be run) with `--host=TYPE'.
        !           166: 
        !           167: Sharing Defaults
        !           168: ================
        !           169: 
        !           170:    If you want to set default values for `configure' scripts to share,
        !           171: you can create a site shell script called `config.site' that gives
        !           172: default values for variables like `CC', `cache_file', and `prefix'.
        !           173: `configure' looks for `PREFIX/share/config.site' if it exists, then
        !           174: `PREFIX/etc/config.site' if it exists.  Or, you can set the
        !           175: `CONFIG_SITE' environment variable to the location of the site script.
        !           176: A warning: not all `configure' scripts look for a site script.
        !           177: 
        !           178: Defining Variables
        !           179: ==================
        !           180: 
        !           181:    Variables not defined in a site shell script can be set in the
        !           182: environment passed to `configure'.  However, some packages may run
        !           183: configure again during the build, and the customized values of these
        !           184: variables may be lost.  In order to avoid this problem, you should set
        !           185: them in the `configure' command line, using `VAR=value'.  For example:
        !           186: 
        !           187:      ./configure CC=/usr/local2/bin/gcc
        !           188: 
        !           189: will cause the specified gcc to be used as the C compiler (unless it is
        !           190: overridden in the site shell script).
        !           191: 
        !           192: `configure' Invocation
        !           193: ======================
        !           194: 
        !           195:    `configure' recognizes the following options to control how it
        !           196: operates.
        !           197: 
        !           198: `--help'
        !           199: `-h'
        !           200:      Print a summary of the options to `configure', and exit.
        !           201: 
        !           202: `--version'
        !           203: `-V'
        !           204:      Print the version of Autoconf used to generate the `configure'
        !           205:      script, and exit.
        !           206: 
        !           207: `--cache-file=FILE'
        !           208:      Enable the cache: use and save the results of the tests in FILE,
        !           209:      traditionally `config.cache'.  FILE defaults to `/dev/null' to
        !           210:      disable caching.
        !           211: 
        !           212: `--config-cache'
        !           213: `-C'
        !           214:      Alias for `--cache-file=config.cache'.
        !           215: 
        !           216: `--quiet'
        !           217: `--silent'
        !           218: `-q'
        !           219:      Do not print messages saying which checks are being made.  To
        !           220:      suppress all normal output, redirect it to `/dev/null' (any error
        !           221:      messages will still be shown).
        !           222: 
        !           223: `--srcdir=DIR'
        !           224:      Look for the package's source code in directory DIR.  Usually
        !           225:      `configure' can determine that directory automatically.
        !           226: 
        !           227: `configure' also accepts some other, not widely useful, options.  Run
        !           228: `configure --help' for more details.
        !           229: 

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>