Annotation of embedaddon/coova-chilli/aclocal.m4, revision 1.1
1.1 ! misho 1: # generated automatically by aclocal 1.9.6 -*- Autoconf -*-
! 2:
! 3: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
! 4: # 2005 Free Software Foundation, Inc.
! 5: # This file is free software; the Free Software Foundation
! 6: # gives unlimited permission to copy and/or distribute it,
! 7: # with or without modifications, as long as this notice is preserved.
! 8:
! 9: # This program is distributed in the hope that it will be useful,
! 10: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 11: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 12: # PARTICULAR PURPOSE.
! 13:
! 14: # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
! 15:
! 16: # serial 48 AC_PROG_LIBTOOL
! 17:
! 18:
! 19: # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
! 20: # -----------------------------------------------------------
! 21: # If this macro is not defined by Autoconf, define it here.
! 22: m4_ifdef([AC_PROVIDE_IFELSE],
! 23: [],
! 24: [m4_define([AC_PROVIDE_IFELSE],
! 25: [m4_ifdef([AC_PROVIDE_$1],
! 26: [$2], [$3])])])
! 27:
! 28:
! 29: # AC_PROG_LIBTOOL
! 30: # ---------------
! 31: AC_DEFUN([AC_PROG_LIBTOOL],
! 32: [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
! 33: dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
! 34: dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
! 35: AC_PROVIDE_IFELSE([AC_PROG_CXX],
! 36: [AC_LIBTOOL_CXX],
! 37: [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
! 38: ])])
! 39: dnl And a similar setup for Fortran 77 support
! 40: AC_PROVIDE_IFELSE([AC_PROG_F77],
! 41: [AC_LIBTOOL_F77],
! 42: [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
! 43: ])])
! 44:
! 45: dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
! 46: dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
! 47: dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
! 48: AC_PROVIDE_IFELSE([AC_PROG_GCJ],
! 49: [AC_LIBTOOL_GCJ],
! 50: [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
! 51: [AC_LIBTOOL_GCJ],
! 52: [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
! 53: [AC_LIBTOOL_GCJ],
! 54: [ifdef([AC_PROG_GCJ],
! 55: [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
! 56: ifdef([A][M_PROG_GCJ],
! 57: [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
! 58: ifdef([LT_AC_PROG_GCJ],
! 59: [define([LT_AC_PROG_GCJ],
! 60: defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
! 61: ])])# AC_PROG_LIBTOOL
! 62:
! 63:
! 64: # _AC_PROG_LIBTOOL
! 65: # ----------------
! 66: AC_DEFUN([_AC_PROG_LIBTOOL],
! 67: [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
! 68: AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
! 69: AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
! 70: AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
! 71:
! 72: # This can be used to rebuild libtool when needed
! 73: LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
! 74:
! 75: # Always use our own libtool.
! 76: LIBTOOL='$(SHELL) $(top_builddir)/libtool'
! 77: AC_SUBST(LIBTOOL)dnl
! 78:
! 79: # Prevent multiple expansion
! 80: define([AC_PROG_LIBTOOL], [])
! 81: ])# _AC_PROG_LIBTOOL
! 82:
! 83:
! 84: # AC_LIBTOOL_SETUP
! 85: # ----------------
! 86: AC_DEFUN([AC_LIBTOOL_SETUP],
! 87: [AC_PREREQ(2.50)dnl
! 88: AC_REQUIRE([AC_ENABLE_SHARED])dnl
! 89: AC_REQUIRE([AC_ENABLE_STATIC])dnl
! 90: AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
! 91: AC_REQUIRE([AC_CANONICAL_HOST])dnl
! 92: AC_REQUIRE([AC_CANONICAL_BUILD])dnl
! 93: AC_REQUIRE([AC_PROG_CC])dnl
! 94: AC_REQUIRE([AC_PROG_LD])dnl
! 95: AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
! 96: AC_REQUIRE([AC_PROG_NM])dnl
! 97:
! 98: AC_REQUIRE([AC_PROG_LN_S])dnl
! 99: AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
! 100: # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
! 101: AC_REQUIRE([AC_OBJEXT])dnl
! 102: AC_REQUIRE([AC_EXEEXT])dnl
! 103: dnl
! 104:
! 105: AC_LIBTOOL_SYS_MAX_CMD_LEN
! 106: AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
! 107: AC_LIBTOOL_OBJDIR
! 108:
! 109: AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
! 110: _LT_AC_PROG_ECHO_BACKSLASH
! 111:
! 112: case $host_os in
! 113: aix3*)
! 114: # AIX sometimes has problems with the GCC collect2 program. For some
! 115: # reason, if we set the COLLECT_NAMES environment variable, the problems
! 116: # vanish in a puff of smoke.
! 117: if test "X${COLLECT_NAMES+set}" != Xset; then
! 118: COLLECT_NAMES=
! 119: export COLLECT_NAMES
! 120: fi
! 121: ;;
! 122: esac
! 123:
! 124: # Sed substitution that helps us do robust quoting. It backslashifies
! 125: # metacharacters that are still active within double-quoted strings.
! 126: Xsed='sed -e 1s/^X//'
! 127: [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
! 128:
! 129: # Same as above, but do not quote variable references.
! 130: [double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
! 131:
! 132: # Sed substitution to delay expansion of an escaped shell variable in a
! 133: # double_quote_subst'ed string.
! 134: delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
! 135:
! 136: # Sed substitution to avoid accidental globbing in evaled expressions
! 137: no_glob_subst='s/\*/\\\*/g'
! 138:
! 139: # Constants:
! 140: rm="rm -f"
! 141:
! 142: # Global variables:
! 143: default_ofile=libtool
! 144: can_build_shared=yes
! 145:
! 146: # All known linkers require a `.a' archive for static linking (except MSVC,
! 147: # which needs '.lib').
! 148: libext=a
! 149: ltmain="$ac_aux_dir/ltmain.sh"
! 150: ofile="$default_ofile"
! 151: with_gnu_ld="$lt_cv_prog_gnu_ld"
! 152:
! 153: AC_CHECK_TOOL(AR, ar, false)
! 154: AC_CHECK_TOOL(RANLIB, ranlib, :)
! 155: AC_CHECK_TOOL(STRIP, strip, :)
! 156:
! 157: old_CC="$CC"
! 158: old_CFLAGS="$CFLAGS"
! 159:
! 160: # Set sane defaults for various variables
! 161: test -z "$AR" && AR=ar
! 162: test -z "$AR_FLAGS" && AR_FLAGS=cru
! 163: test -z "$AS" && AS=as
! 164: test -z "$CC" && CC=cc
! 165: test -z "$LTCC" && LTCC=$CC
! 166: test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
! 167: test -z "$DLLTOOL" && DLLTOOL=dlltool
! 168: test -z "$LD" && LD=ld
! 169: test -z "$LN_S" && LN_S="ln -s"
! 170: test -z "$MAGIC_CMD" && MAGIC_CMD=file
! 171: test -z "$NM" && NM=nm
! 172: test -z "$SED" && SED=sed
! 173: test -z "$OBJDUMP" && OBJDUMP=objdump
! 174: test -z "$RANLIB" && RANLIB=:
! 175: test -z "$STRIP" && STRIP=:
! 176: test -z "$ac_objext" && ac_objext=o
! 177:
! 178: # Determine commands to create old-style static archives.
! 179: old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
! 180: old_postinstall_cmds='chmod 644 $oldlib'
! 181: old_postuninstall_cmds=
! 182:
! 183: if test -n "$RANLIB"; then
! 184: case $host_os in
! 185: openbsd*)
! 186: old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
! 187: ;;
! 188: *)
! 189: old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
! 190: ;;
! 191: esac
! 192: old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
! 193: fi
! 194:
! 195: _LT_CC_BASENAME([$compiler])
! 196:
! 197: # Only perform the check for file, if the check method requires it
! 198: case $deplibs_check_method in
! 199: file_magic*)
! 200: if test "$file_magic_cmd" = '$MAGIC_CMD'; then
! 201: AC_PATH_MAGIC
! 202: fi
! 203: ;;
! 204: esac
! 205:
! 206: AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
! 207: AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
! 208: enable_win32_dll=yes, enable_win32_dll=no)
! 209:
! 210: AC_ARG_ENABLE([libtool-lock],
! 211: [AC_HELP_STRING([--disable-libtool-lock],
! 212: [avoid locking (might break parallel builds)])])
! 213: test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
! 214:
! 215: AC_ARG_WITH([pic],
! 216: [AC_HELP_STRING([--with-pic],
! 217: [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
! 218: [pic_mode="$withval"],
! 219: [pic_mode=default])
! 220: test -z "$pic_mode" && pic_mode=default
! 221:
! 222: # Use C for the default configuration in the libtool script
! 223: tagname=
! 224: AC_LIBTOOL_LANG_C_CONFIG
! 225: _LT_AC_TAGCONFIG
! 226: ])# AC_LIBTOOL_SETUP
! 227:
! 228:
! 229: # _LT_AC_SYS_COMPILER
! 230: # -------------------
! 231: AC_DEFUN([_LT_AC_SYS_COMPILER],
! 232: [AC_REQUIRE([AC_PROG_CC])dnl
! 233:
! 234: # If no C compiler was specified, use CC.
! 235: LTCC=${LTCC-"$CC"}
! 236:
! 237: # If no C compiler flags were specified, use CFLAGS.
! 238: LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
! 239:
! 240: # Allow CC to be a program name with arguments.
! 241: compiler=$CC
! 242: ])# _LT_AC_SYS_COMPILER
! 243:
! 244:
! 245: # _LT_CC_BASENAME(CC)
! 246: # -------------------
! 247: # Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
! 248: AC_DEFUN([_LT_CC_BASENAME],
! 249: [for cc_temp in $1""; do
! 250: case $cc_temp in
! 251: compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
! 252: distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
! 253: \-*) ;;
! 254: *) break;;
! 255: esac
! 256: done
! 257: cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
! 258: ])
! 259:
! 260:
! 261: # _LT_COMPILER_BOILERPLATE
! 262: # ------------------------
! 263: # Check for compiler boilerplate output or warnings with
! 264: # the simple compiler test code.
! 265: AC_DEFUN([_LT_COMPILER_BOILERPLATE],
! 266: [ac_outfile=conftest.$ac_objext
! 267: printf "$lt_simple_compile_test_code" >conftest.$ac_ext
! 268: eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
! 269: _lt_compiler_boilerplate=`cat conftest.err`
! 270: $rm conftest*
! 271: ])# _LT_COMPILER_BOILERPLATE
! 272:
! 273:
! 274: # _LT_LINKER_BOILERPLATE
! 275: # ----------------------
! 276: # Check for linker boilerplate output or warnings with
! 277: # the simple link test code.
! 278: AC_DEFUN([_LT_LINKER_BOILERPLATE],
! 279: [ac_outfile=conftest.$ac_objext
! 280: printf "$lt_simple_link_test_code" >conftest.$ac_ext
! 281: eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
! 282: _lt_linker_boilerplate=`cat conftest.err`
! 283: $rm conftest*
! 284: ])# _LT_LINKER_BOILERPLATE
! 285:
! 286:
! 287: # _LT_AC_SYS_LIBPATH_AIX
! 288: # ----------------------
! 289: # Links a minimal program and checks the executable
! 290: # for the system default hardcoded library path. In most cases,
! 291: # this is /usr/lib:/lib, but when the MPI compilers are used
! 292: # the location of the communication and MPI libs are included too.
! 293: # If we don't find anything, use the default library path according
! 294: # to the aix ld manual.
! 295: AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
! 296: [AC_LINK_IFELSE(AC_LANG_PROGRAM,[
! 297: aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
! 298: }'`
! 299: # Check for a 64-bit object if we didn't find anything.
! 300: if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
! 301: }'`; fi],[])
! 302: if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
! 303: ])# _LT_AC_SYS_LIBPATH_AIX
! 304:
! 305:
! 306: # _LT_AC_SHELL_INIT(ARG)
! 307: # ----------------------
! 308: AC_DEFUN([_LT_AC_SHELL_INIT],
! 309: [ifdef([AC_DIVERSION_NOTICE],
! 310: [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
! 311: [AC_DIVERT_PUSH(NOTICE)])
! 312: $1
! 313: AC_DIVERT_POP
! 314: ])# _LT_AC_SHELL_INIT
! 315:
! 316:
! 317: # _LT_AC_PROG_ECHO_BACKSLASH
! 318: # --------------------------
! 319: # Add some code to the start of the generated configure script which
! 320: # will find an echo command which doesn't interpret backslashes.
! 321: AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
! 322: [_LT_AC_SHELL_INIT([
! 323: # Check that we are running under the correct shell.
! 324: SHELL=${CONFIG_SHELL-/bin/sh}
! 325:
! 326: case X$ECHO in
! 327: X*--fallback-echo)
! 328: # Remove one level of quotation (which was required for Make).
! 329: ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
! 330: ;;
! 331: esac
! 332:
! 333: echo=${ECHO-echo}
! 334: if test "X[$]1" = X--no-reexec; then
! 335: # Discard the --no-reexec flag, and continue.
! 336: shift
! 337: elif test "X[$]1" = X--fallback-echo; then
! 338: # Avoid inline document here, it may be left over
! 339: :
! 340: elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
! 341: # Yippee, $echo works!
! 342: :
! 343: else
! 344: # Restart under the correct shell.
! 345: exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
! 346: fi
! 347:
! 348: if test "X[$]1" = X--fallback-echo; then
! 349: # used as fallback echo
! 350: shift
! 351: cat <<EOF
! 352: [$]*
! 353: EOF
! 354: exit 0
! 355: fi
! 356:
! 357: # The HP-UX ksh and POSIX shell print the target directory to stdout
! 358: # if CDPATH is set.
! 359: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
! 360:
! 361: if test -z "$ECHO"; then
! 362: if test "X${echo_test_string+set}" != Xset; then
! 363: # find a string as large as possible, as long as the shell can cope with it
! 364: for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
! 365: # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
! 366: if (echo_test_string=`eval $cmd`) 2>/dev/null &&
! 367: echo_test_string=`eval $cmd` &&
! 368: (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
! 369: then
! 370: break
! 371: fi
! 372: done
! 373: fi
! 374:
! 375: if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
! 376: echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
! 377: test "X$echo_testing_string" = "X$echo_test_string"; then
! 378: :
! 379: else
! 380: # The Solaris, AIX, and Digital Unix default echo programs unquote
! 381: # backslashes. This makes it impossible to quote backslashes using
! 382: # echo "$something" | sed 's/\\/\\\\/g'
! 383: #
! 384: # So, first we look for a working echo in the user's PATH.
! 385:
! 386: lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
! 387: for dir in $PATH /usr/ucb; do
! 388: IFS="$lt_save_ifs"
! 389: if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
! 390: test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
! 391: echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
! 392: test "X$echo_testing_string" = "X$echo_test_string"; then
! 393: echo="$dir/echo"
! 394: break
! 395: fi
! 396: done
! 397: IFS="$lt_save_ifs"
! 398:
! 399: if test "X$echo" = Xecho; then
! 400: # We didn't find a better echo, so look for alternatives.
! 401: if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
! 402: echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
! 403: test "X$echo_testing_string" = "X$echo_test_string"; then
! 404: # This shell has a builtin print -r that does the trick.
! 405: echo='print -r'
! 406: elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
! 407: test "X$CONFIG_SHELL" != X/bin/ksh; then
! 408: # If we have ksh, try running configure again with it.
! 409: ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
! 410: export ORIGINAL_CONFIG_SHELL
! 411: CONFIG_SHELL=/bin/ksh
! 412: export CONFIG_SHELL
! 413: exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
! 414: else
! 415: # Try using printf.
! 416: echo='printf %s\n'
! 417: if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
! 418: echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
! 419: test "X$echo_testing_string" = "X$echo_test_string"; then
! 420: # Cool, printf works
! 421: :
! 422: elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
! 423: test "X$echo_testing_string" = 'X\t' &&
! 424: echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
! 425: test "X$echo_testing_string" = "X$echo_test_string"; then
! 426: CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
! 427: export CONFIG_SHELL
! 428: SHELL="$CONFIG_SHELL"
! 429: export SHELL
! 430: echo="$CONFIG_SHELL [$]0 --fallback-echo"
! 431: elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
! 432: test "X$echo_testing_string" = 'X\t' &&
! 433: echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
! 434: test "X$echo_testing_string" = "X$echo_test_string"; then
! 435: echo="$CONFIG_SHELL [$]0 --fallback-echo"
! 436: else
! 437: # maybe with a smaller string...
! 438: prev=:
! 439:
! 440: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
! 441: if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
! 442: then
! 443: break
! 444: fi
! 445: prev="$cmd"
! 446: done
! 447:
! 448: if test "$prev" != 'sed 50q "[$]0"'; then
! 449: echo_test_string=`eval $prev`
! 450: export echo_test_string
! 451: exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
! 452: else
! 453: # Oops. We lost completely, so just stick with echo.
! 454: echo=echo
! 455: fi
! 456: fi
! 457: fi
! 458: fi
! 459: fi
! 460: fi
! 461:
! 462: # Copy echo and quote the copy suitably for passing to libtool from
! 463: # the Makefile, instead of quoting the original, which is used later.
! 464: ECHO=$echo
! 465: if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
! 466: ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
! 467: fi
! 468:
! 469: AC_SUBST(ECHO)
! 470: ])])# _LT_AC_PROG_ECHO_BACKSLASH
! 471:
! 472:
! 473: # _LT_AC_LOCK
! 474: # -----------
! 475: AC_DEFUN([_LT_AC_LOCK],
! 476: [AC_ARG_ENABLE([libtool-lock],
! 477: [AC_HELP_STRING([--disable-libtool-lock],
! 478: [avoid locking (might break parallel builds)])])
! 479: test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
! 480:
! 481: # Some flags need to be propagated to the compiler or linker for good
! 482: # libtool support.
! 483: case $host in
! 484: ia64-*-hpux*)
! 485: # Find out which ABI we are using.
! 486: echo 'int i;' > conftest.$ac_ext
! 487: if AC_TRY_EVAL(ac_compile); then
! 488: case `/usr/bin/file conftest.$ac_objext` in
! 489: *ELF-32*)
! 490: HPUX_IA64_MODE="32"
! 491: ;;
! 492: *ELF-64*)
! 493: HPUX_IA64_MODE="64"
! 494: ;;
! 495: esac
! 496: fi
! 497: rm -rf conftest*
! 498: ;;
! 499: *-*-irix6*)
! 500: # Find out which ABI we are using.
! 501: echo '[#]line __oline__ "configure"' > conftest.$ac_ext
! 502: if AC_TRY_EVAL(ac_compile); then
! 503: if test "$lt_cv_prog_gnu_ld" = yes; then
! 504: case `/usr/bin/file conftest.$ac_objext` in
! 505: *32-bit*)
! 506: LD="${LD-ld} -melf32bsmip"
! 507: ;;
! 508: *N32*)
! 509: LD="${LD-ld} -melf32bmipn32"
! 510: ;;
! 511: *64-bit*)
! 512: LD="${LD-ld} -melf64bmip"
! 513: ;;
! 514: esac
! 515: else
! 516: case `/usr/bin/file conftest.$ac_objext` in
! 517: *32-bit*)
! 518: LD="${LD-ld} -32"
! 519: ;;
! 520: *N32*)
! 521: LD="${LD-ld} -n32"
! 522: ;;
! 523: *64-bit*)
! 524: LD="${LD-ld} -64"
! 525: ;;
! 526: esac
! 527: fi
! 528: fi
! 529: rm -rf conftest*
! 530: ;;
! 531:
! 532: x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
! 533: # Find out which ABI we are using.
! 534: echo 'int i;' > conftest.$ac_ext
! 535: if AC_TRY_EVAL(ac_compile); then
! 536: case `/usr/bin/file conftest.o` in
! 537: *32-bit*)
! 538: case $host in
! 539: x86_64-*linux*)
! 540: LD="${LD-ld} -m elf_i386"
! 541: ;;
! 542: ppc64-*linux*|powerpc64-*linux*)
! 543: LD="${LD-ld} -m elf32ppclinux"
! 544: ;;
! 545: s390x-*linux*)
! 546: LD="${LD-ld} -m elf_s390"
! 547: ;;
! 548: sparc64-*linux*)
! 549: LD="${LD-ld} -m elf32_sparc"
! 550: ;;
! 551: esac
! 552: ;;
! 553: *64-bit*)
! 554: case $host in
! 555: x86_64-*linux*)
! 556: LD="${LD-ld} -m elf_x86_64"
! 557: ;;
! 558: ppc*-*linux*|powerpc*-*linux*)
! 559: LD="${LD-ld} -m elf64ppc"
! 560: ;;
! 561: s390*-*linux*)
! 562: LD="${LD-ld} -m elf64_s390"
! 563: ;;
! 564: sparc*-*linux*)
! 565: LD="${LD-ld} -m elf64_sparc"
! 566: ;;
! 567: esac
! 568: ;;
! 569: esac
! 570: fi
! 571: rm -rf conftest*
! 572: ;;
! 573:
! 574: *-*-sco3.2v5*)
! 575: # On SCO OpenServer 5, we need -belf to get full-featured binaries.
! 576: SAVE_CFLAGS="$CFLAGS"
! 577: CFLAGS="$CFLAGS -belf"
! 578: AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
! 579: [AC_LANG_PUSH(C)
! 580: AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
! 581: AC_LANG_POP])
! 582: if test x"$lt_cv_cc_needs_belf" != x"yes"; then
! 583: # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
! 584: CFLAGS="$SAVE_CFLAGS"
! 585: fi
! 586: ;;
! 587: sparc*-*solaris*)
! 588: # Find out which ABI we are using.
! 589: echo 'int i;' > conftest.$ac_ext
! 590: if AC_TRY_EVAL(ac_compile); then
! 591: case `/usr/bin/file conftest.o` in
! 592: *64-bit*)
! 593: case $lt_cv_prog_gnu_ld in
! 594: yes*) LD="${LD-ld} -m elf64_sparc" ;;
! 595: *) LD="${LD-ld} -64" ;;
! 596: esac
! 597: ;;
! 598: esac
! 599: fi
! 600: rm -rf conftest*
! 601: ;;
! 602:
! 603: AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
! 604: [*-*-cygwin* | *-*-mingw* | *-*-pw32*)
! 605: AC_CHECK_TOOL(DLLTOOL, dlltool, false)
! 606: AC_CHECK_TOOL(AS, as, false)
! 607: AC_CHECK_TOOL(OBJDUMP, objdump, false)
! 608: ;;
! 609: ])
! 610: esac
! 611:
! 612: need_locks="$enable_libtool_lock"
! 613:
! 614: ])# _LT_AC_LOCK
! 615:
! 616:
! 617: # AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
! 618: # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
! 619: # ----------------------------------------------------------------
! 620: # Check whether the given compiler option works
! 621: AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
! 622: [AC_REQUIRE([LT_AC_PROG_SED])
! 623: AC_CACHE_CHECK([$1], [$2],
! 624: [$2=no
! 625: ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
! 626: printf "$lt_simple_compile_test_code" > conftest.$ac_ext
! 627: lt_compiler_flag="$3"
! 628: # Insert the option either (1) after the last *FLAGS variable, or
! 629: # (2) before a word containing "conftest.", or (3) at the end.
! 630: # Note that $ac_compile itself does not contain backslashes and begins
! 631: # with a dollar sign (not a hyphen), so the echo should work correctly.
! 632: # The option is referenced via a variable to avoid confusing sed.
! 633: lt_compile=`echo "$ac_compile" | $SED \
! 634: -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
! 635: -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
! 636: -e 's:$: $lt_compiler_flag:'`
! 637: (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
! 638: (eval "$lt_compile" 2>conftest.err)
! 639: ac_status=$?
! 640: cat conftest.err >&AS_MESSAGE_LOG_FD
! 641: echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
! 642: if (exit $ac_status) && test -s "$ac_outfile"; then
! 643: # The compiler can only warn and ignore the option if not recognized
! 644: # So say no if there are warnings other than the usual output.
! 645: $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
! 646: $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
! 647: if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
! 648: $2=yes
! 649: fi
! 650: fi
! 651: $rm conftest*
! 652: ])
! 653:
! 654: if test x"[$]$2" = xyes; then
! 655: ifelse([$5], , :, [$5])
! 656: else
! 657: ifelse([$6], , :, [$6])
! 658: fi
! 659: ])# AC_LIBTOOL_COMPILER_OPTION
! 660:
! 661:
! 662: # AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
! 663: # [ACTION-SUCCESS], [ACTION-FAILURE])
! 664: # ------------------------------------------------------------
! 665: # Check whether the given compiler option works
! 666: AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
! 667: [AC_CACHE_CHECK([$1], [$2],
! 668: [$2=no
! 669: save_LDFLAGS="$LDFLAGS"
! 670: LDFLAGS="$LDFLAGS $3"
! 671: printf "$lt_simple_link_test_code" > conftest.$ac_ext
! 672: if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
! 673: # The linker can only warn and ignore the option if not recognized
! 674: # So say no if there are warnings
! 675: if test -s conftest.err; then
! 676: # Append any errors to the config.log.
! 677: cat conftest.err 1>&AS_MESSAGE_LOG_FD
! 678: $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
! 679: $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
! 680: if diff conftest.exp conftest.er2 >/dev/null; then
! 681: $2=yes
! 682: fi
! 683: else
! 684: $2=yes
! 685: fi
! 686: fi
! 687: $rm conftest*
! 688: LDFLAGS="$save_LDFLAGS"
! 689: ])
! 690:
! 691: if test x"[$]$2" = xyes; then
! 692: ifelse([$4], , :, [$4])
! 693: else
! 694: ifelse([$5], , :, [$5])
! 695: fi
! 696: ])# AC_LIBTOOL_LINKER_OPTION
! 697:
! 698:
! 699: # AC_LIBTOOL_SYS_MAX_CMD_LEN
! 700: # --------------------------
! 701: AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
! 702: [# find the maximum length of command line arguments
! 703: AC_MSG_CHECKING([the maximum length of command line arguments])
! 704: AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
! 705: i=0
! 706: teststring="ABCD"
! 707:
! 708: case $build_os in
! 709: msdosdjgpp*)
! 710: # On DJGPP, this test can blow up pretty badly due to problems in libc
! 711: # (any single argument exceeding 2000 bytes causes a buffer overrun
! 712: # during glob expansion). Even if it were fixed, the result of this
! 713: # check would be larger than it should be.
! 714: lt_cv_sys_max_cmd_len=12288; # 12K is about right
! 715: ;;
! 716:
! 717: gnu*)
! 718: # Under GNU Hurd, this test is not required because there is
! 719: # no limit to the length of command line arguments.
! 720: # Libtool will interpret -1 as no limit whatsoever
! 721: lt_cv_sys_max_cmd_len=-1;
! 722: ;;
! 723:
! 724: cygwin* | mingw*)
! 725: # On Win9x/ME, this test blows up -- it succeeds, but takes
! 726: # about 5 minutes as the teststring grows exponentially.
! 727: # Worse, since 9x/ME are not pre-emptively multitasking,
! 728: # you end up with a "frozen" computer, even though with patience
! 729: # the test eventually succeeds (with a max line length of 256k).
! 730: # Instead, let's just punt: use the minimum linelength reported by
! 731: # all of the supported platforms: 8192 (on NT/2K/XP).
! 732: lt_cv_sys_max_cmd_len=8192;
! 733: ;;
! 734:
! 735: amigaos*)
! 736: # On AmigaOS with pdksh, this test takes hours, literally.
! 737: # So we just punt and use a minimum line length of 8192.
! 738: lt_cv_sys_max_cmd_len=8192;
! 739: ;;
! 740:
! 741: netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
! 742: # This has been around since 386BSD, at least. Likely further.
! 743: if test -x /sbin/sysctl; then
! 744: lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
! 745: elif test -x /usr/sbin/sysctl; then
! 746: lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
! 747: else
! 748: lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
! 749: fi
! 750: # And add a safety zone
! 751: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
! 752: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
! 753: ;;
! 754:
! 755: interix*)
! 756: # We know the value 262144 and hardcode it with a safety zone (like BSD)
! 757: lt_cv_sys_max_cmd_len=196608
! 758: ;;
! 759:
! 760: osf*)
! 761: # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
! 762: # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
! 763: # nice to cause kernel panics so lets avoid the loop below.
! 764: # First set a reasonable default.
! 765: lt_cv_sys_max_cmd_len=16384
! 766: #
! 767: if test -x /sbin/sysconfig; then
! 768: case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
! 769: *1*) lt_cv_sys_max_cmd_len=-1 ;;
! 770: esac
! 771: fi
! 772: ;;
! 773: sco3.2v5*)
! 774: lt_cv_sys_max_cmd_len=102400
! 775: ;;
! 776: sysv5* | sco5v6* | sysv4.2uw2*)
! 777: kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
! 778: if test -n "$kargmax"; then
! 779: lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
! 780: else
! 781: lt_cv_sys_max_cmd_len=32768
! 782: fi
! 783: ;;
! 784: *)
! 785: # If test is not a shell built-in, we'll probably end up computing a
! 786: # maximum length that is only half of the actual maximum length, but
! 787: # we can't tell.
! 788: SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
! 789: while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
! 790: = "XX$teststring") >/dev/null 2>&1 &&
! 791: new_result=`expr "X$teststring" : ".*" 2>&1` &&
! 792: lt_cv_sys_max_cmd_len=$new_result &&
! 793: test $i != 17 # 1/2 MB should be enough
! 794: do
! 795: i=`expr $i + 1`
! 796: teststring=$teststring$teststring
! 797: done
! 798: teststring=
! 799: # Add a significant safety factor because C++ compilers can tack on massive
! 800: # amounts of additional arguments before passing them to the linker.
! 801: # It appears as though 1/2 is a usable value.
! 802: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
! 803: ;;
! 804: esac
! 805: ])
! 806: if test -n $lt_cv_sys_max_cmd_len ; then
! 807: AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
! 808: else
! 809: AC_MSG_RESULT(none)
! 810: fi
! 811: ])# AC_LIBTOOL_SYS_MAX_CMD_LEN
! 812:
! 813:
! 814: # _LT_AC_CHECK_DLFCN
! 815: # ------------------
! 816: AC_DEFUN([_LT_AC_CHECK_DLFCN],
! 817: [AC_CHECK_HEADERS(dlfcn.h)dnl
! 818: ])# _LT_AC_CHECK_DLFCN
! 819:
! 820:
! 821: # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
! 822: # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
! 823: # ---------------------------------------------------------------------
! 824: AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
! 825: [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
! 826: if test "$cross_compiling" = yes; then :
! 827: [$4]
! 828: else
! 829: lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
! 830: lt_status=$lt_dlunknown
! 831: cat > conftest.$ac_ext <<EOF
! 832: [#line __oline__ "configure"
! 833: #include "confdefs.h"
! 834:
! 835: #if HAVE_DLFCN_H
! 836: #include <dlfcn.h>
! 837: #endif
! 838:
! 839: #include <stdio.h>
! 840:
! 841: #ifdef RTLD_GLOBAL
! 842: # define LT_DLGLOBAL RTLD_GLOBAL
! 843: #else
! 844: # ifdef DL_GLOBAL
! 845: # define LT_DLGLOBAL DL_GLOBAL
! 846: # else
! 847: # define LT_DLGLOBAL 0
! 848: # endif
! 849: #endif
! 850:
! 851: /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
! 852: find out it does not work in some platform. */
! 853: #ifndef LT_DLLAZY_OR_NOW
! 854: # ifdef RTLD_LAZY
! 855: # define LT_DLLAZY_OR_NOW RTLD_LAZY
! 856: # else
! 857: # ifdef DL_LAZY
! 858: # define LT_DLLAZY_OR_NOW DL_LAZY
! 859: # else
! 860: # ifdef RTLD_NOW
! 861: # define LT_DLLAZY_OR_NOW RTLD_NOW
! 862: # else
! 863: # ifdef DL_NOW
! 864: # define LT_DLLAZY_OR_NOW DL_NOW
! 865: # else
! 866: # define LT_DLLAZY_OR_NOW 0
! 867: # endif
! 868: # endif
! 869: # endif
! 870: # endif
! 871: #endif
! 872:
! 873: #ifdef __cplusplus
! 874: extern "C" void exit (int);
! 875: #endif
! 876:
! 877: void fnord() { int i=42;}
! 878: int main ()
! 879: {
! 880: void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
! 881: int status = $lt_dlunknown;
! 882:
! 883: if (self)
! 884: {
! 885: if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
! 886: else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
! 887: /* dlclose (self); */
! 888: }
! 889: else
! 890: puts (dlerror ());
! 891:
! 892: exit (status);
! 893: }]
! 894: EOF
! 895: if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
! 896: (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
! 897: lt_status=$?
! 898: case x$lt_status in
! 899: x$lt_dlno_uscore) $1 ;;
! 900: x$lt_dlneed_uscore) $2 ;;
! 901: x$lt_dlunknown|x*) $3 ;;
! 902: esac
! 903: else :
! 904: # compilation failed
! 905: $3
! 906: fi
! 907: fi
! 908: rm -fr conftest*
! 909: ])# _LT_AC_TRY_DLOPEN_SELF
! 910:
! 911:
! 912: # AC_LIBTOOL_DLOPEN_SELF
! 913: # ----------------------
! 914: AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
! 915: [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
! 916: if test "x$enable_dlopen" != xyes; then
! 917: enable_dlopen=unknown
! 918: enable_dlopen_self=unknown
! 919: enable_dlopen_self_static=unknown
! 920: else
! 921: lt_cv_dlopen=no
! 922: lt_cv_dlopen_libs=
! 923:
! 924: case $host_os in
! 925: beos*)
! 926: lt_cv_dlopen="load_add_on"
! 927: lt_cv_dlopen_libs=
! 928: lt_cv_dlopen_self=yes
! 929: ;;
! 930:
! 931: mingw* | pw32*)
! 932: lt_cv_dlopen="LoadLibrary"
! 933: lt_cv_dlopen_libs=
! 934: ;;
! 935:
! 936: cygwin*)
! 937: lt_cv_dlopen="dlopen"
! 938: lt_cv_dlopen_libs=
! 939: ;;
! 940:
! 941: darwin*)
! 942: # if libdl is installed we need to link against it
! 943: AC_CHECK_LIB([dl], [dlopen],
! 944: [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
! 945: lt_cv_dlopen="dyld"
! 946: lt_cv_dlopen_libs=
! 947: lt_cv_dlopen_self=yes
! 948: ])
! 949: ;;
! 950:
! 951: *)
! 952: AC_CHECK_FUNC([shl_load],
! 953: [lt_cv_dlopen="shl_load"],
! 954: [AC_CHECK_LIB([dld], [shl_load],
! 955: [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
! 956: [AC_CHECK_FUNC([dlopen],
! 957: [lt_cv_dlopen="dlopen"],
! 958: [AC_CHECK_LIB([dl], [dlopen],
! 959: [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
! 960: [AC_CHECK_LIB([svld], [dlopen],
! 961: [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
! 962: [AC_CHECK_LIB([dld], [dld_link],
! 963: [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
! 964: ])
! 965: ])
! 966: ])
! 967: ])
! 968: ])
! 969: ;;
! 970: esac
! 971:
! 972: if test "x$lt_cv_dlopen" != xno; then
! 973: enable_dlopen=yes
! 974: else
! 975: enable_dlopen=no
! 976: fi
! 977:
! 978: case $lt_cv_dlopen in
! 979: dlopen)
! 980: save_CPPFLAGS="$CPPFLAGS"
! 981: test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
! 982:
! 983: save_LDFLAGS="$LDFLAGS"
! 984: wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
! 985:
! 986: save_LIBS="$LIBS"
! 987: LIBS="$lt_cv_dlopen_libs $LIBS"
! 988:
! 989: AC_CACHE_CHECK([whether a program can dlopen itself],
! 990: lt_cv_dlopen_self, [dnl
! 991: _LT_AC_TRY_DLOPEN_SELF(
! 992: lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
! 993: lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
! 994: ])
! 995:
! 996: if test "x$lt_cv_dlopen_self" = xyes; then
! 997: wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
! 998: AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
! 999: lt_cv_dlopen_self_static, [dnl
! 1000: _LT_AC_TRY_DLOPEN_SELF(
! 1001: lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
! 1002: lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
! 1003: ])
! 1004: fi
! 1005:
! 1006: CPPFLAGS="$save_CPPFLAGS"
! 1007: LDFLAGS="$save_LDFLAGS"
! 1008: LIBS="$save_LIBS"
! 1009: ;;
! 1010: esac
! 1011:
! 1012: case $lt_cv_dlopen_self in
! 1013: yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
! 1014: *) enable_dlopen_self=unknown ;;
! 1015: esac
! 1016:
! 1017: case $lt_cv_dlopen_self_static in
! 1018: yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
! 1019: *) enable_dlopen_self_static=unknown ;;
! 1020: esac
! 1021: fi
! 1022: ])# AC_LIBTOOL_DLOPEN_SELF
! 1023:
! 1024:
! 1025: # AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
! 1026: # ---------------------------------
! 1027: # Check to see if options -c and -o are simultaneously supported by compiler
! 1028: AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
! 1029: [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
! 1030: AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
! 1031: [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
! 1032: [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
! 1033: $rm -r conftest 2>/dev/null
! 1034: mkdir conftest
! 1035: cd conftest
! 1036: mkdir out
! 1037: printf "$lt_simple_compile_test_code" > conftest.$ac_ext
! 1038:
! 1039: lt_compiler_flag="-o out/conftest2.$ac_objext"
! 1040: # Insert the option either (1) after the last *FLAGS variable, or
! 1041: # (2) before a word containing "conftest.", or (3) at the end.
! 1042: # Note that $ac_compile itself does not contain backslashes and begins
! 1043: # with a dollar sign (not a hyphen), so the echo should work correctly.
! 1044: lt_compile=`echo "$ac_compile" | $SED \
! 1045: -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
! 1046: -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
! 1047: -e 's:$: $lt_compiler_flag:'`
! 1048: (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
! 1049: (eval "$lt_compile" 2>out/conftest.err)
! 1050: ac_status=$?
! 1051: cat out/conftest.err >&AS_MESSAGE_LOG_FD
! 1052: echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
! 1053: if (exit $ac_status) && test -s out/conftest2.$ac_objext
! 1054: then
! 1055: # The compiler can only warn and ignore the option if not recognized
! 1056: # So say no if there are warnings
! 1057: $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
! 1058: $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
! 1059: if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
! 1060: _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
! 1061: fi
! 1062: fi
! 1063: chmod u+w . 2>&AS_MESSAGE_LOG_FD
! 1064: $rm conftest*
! 1065: # SGI C++ compiler will create directory out/ii_files/ for
! 1066: # template instantiation
! 1067: test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
! 1068: $rm out/* && rmdir out
! 1069: cd ..
! 1070: rmdir conftest
! 1071: $rm conftest*
! 1072: ])
! 1073: ])# AC_LIBTOOL_PROG_CC_C_O
! 1074:
! 1075:
! 1076: # AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
! 1077: # -----------------------------------------
! 1078: # Check to see if we can do hard links to lock some files if needed
! 1079: AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
! 1080: [AC_REQUIRE([_LT_AC_LOCK])dnl
! 1081:
! 1082: hard_links="nottested"
! 1083: if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
! 1084: # do not overwrite the value of need_locks provided by the user
! 1085: AC_MSG_CHECKING([if we can lock with hard links])
! 1086: hard_links=yes
! 1087: $rm conftest*
! 1088: ln conftest.a conftest.b 2>/dev/null && hard_links=no
! 1089: touch conftest.a
! 1090: ln conftest.a conftest.b 2>&5 || hard_links=no
! 1091: ln conftest.a conftest.b 2>/dev/null && hard_links=no
! 1092: AC_MSG_RESULT([$hard_links])
! 1093: if test "$hard_links" = no; then
! 1094: AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
! 1095: need_locks=warn
! 1096: fi
! 1097: else
! 1098: need_locks=no
! 1099: fi
! 1100: ])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
! 1101:
! 1102:
! 1103: # AC_LIBTOOL_OBJDIR
! 1104: # -----------------
! 1105: AC_DEFUN([AC_LIBTOOL_OBJDIR],
! 1106: [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
! 1107: [rm -f .libs 2>/dev/null
! 1108: mkdir .libs 2>/dev/null
! 1109: if test -d .libs; then
! 1110: lt_cv_objdir=.libs
! 1111: else
! 1112: # MS-DOS does not allow filenames that begin with a dot.
! 1113: lt_cv_objdir=_libs
! 1114: fi
! 1115: rmdir .libs 2>/dev/null])
! 1116: objdir=$lt_cv_objdir
! 1117: ])# AC_LIBTOOL_OBJDIR
! 1118:
! 1119:
! 1120: # AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
! 1121: # ----------------------------------------------
! 1122: # Check hardcoding attributes.
! 1123: AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
! 1124: [AC_MSG_CHECKING([how to hardcode library paths into programs])
! 1125: _LT_AC_TAGVAR(hardcode_action, $1)=
! 1126: if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
! 1127: test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
! 1128: test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
! 1129:
! 1130: # We can hardcode non-existant directories.
! 1131: if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
! 1132: # If the only mechanism to avoid hardcoding is shlibpath_var, we
! 1133: # have to relink, otherwise we might link with an installed library
! 1134: # when we should be linking with a yet-to-be-installed one
! 1135: ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
! 1136: test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
! 1137: # Linking always hardcodes the temporary library directory.
! 1138: _LT_AC_TAGVAR(hardcode_action, $1)=relink
! 1139: else
! 1140: # We can link without hardcoding, and we can hardcode nonexisting dirs.
! 1141: _LT_AC_TAGVAR(hardcode_action, $1)=immediate
! 1142: fi
! 1143: else
! 1144: # We cannot hardcode anything, or else we can only hardcode existing
! 1145: # directories.
! 1146: _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
! 1147: fi
! 1148: AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
! 1149:
! 1150: if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
! 1151: # Fast installation is not supported
! 1152: enable_fast_install=no
! 1153: elif test "$shlibpath_overrides_runpath" = yes ||
! 1154: test "$enable_shared" = no; then
! 1155: # Fast installation is not necessary
! 1156: enable_fast_install=needless
! 1157: fi
! 1158: ])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
! 1159:
! 1160:
! 1161: # AC_LIBTOOL_SYS_LIB_STRIP
! 1162: # ------------------------
! 1163: AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
! 1164: [striplib=
! 1165: old_striplib=
! 1166: AC_MSG_CHECKING([whether stripping libraries is possible])
! 1167: if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
! 1168: test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
! 1169: test -z "$striplib" && striplib="$STRIP --strip-unneeded"
! 1170: AC_MSG_RESULT([yes])
! 1171: else
! 1172: # FIXME - insert some real tests, host_os isn't really good enough
! 1173: case $host_os in
! 1174: darwin*)
! 1175: if test -n "$STRIP" ; then
! 1176: striplib="$STRIP -x"
! 1177: AC_MSG_RESULT([yes])
! 1178: else
! 1179: AC_MSG_RESULT([no])
! 1180: fi
! 1181: ;;
! 1182: *)
! 1183: AC_MSG_RESULT([no])
! 1184: ;;
! 1185: esac
! 1186: fi
! 1187: ])# AC_LIBTOOL_SYS_LIB_STRIP
! 1188:
! 1189:
! 1190: # AC_LIBTOOL_SYS_DYNAMIC_LINKER
! 1191: # -----------------------------
! 1192: # PORTME Fill in your ld.so characteristics
! 1193: AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
! 1194: [AC_MSG_CHECKING([dynamic linker characteristics])
! 1195: library_names_spec=
! 1196: libname_spec='lib$name'
! 1197: soname_spec=
! 1198: shrext_cmds=".so"
! 1199: postinstall_cmds=
! 1200: postuninstall_cmds=
! 1201: finish_cmds=
! 1202: finish_eval=
! 1203: shlibpath_var=
! 1204: shlibpath_overrides_runpath=unknown
! 1205: version_type=none
! 1206: dynamic_linker="$host_os ld.so"
! 1207: sys_lib_dlsearch_path_spec="/lib /usr/lib"
! 1208: if test "$GCC" = yes; then
! 1209: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
! 1210: if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
! 1211: # if the path contains ";" then we assume it to be the separator
! 1212: # otherwise default to the standard path separator (i.e. ":") - it is
! 1213: # assumed that no part of a normal pathname contains ";" but that should
! 1214: # okay in the real world where ";" in dirpaths is itself problematic.
! 1215: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
! 1216: else
! 1217: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
! 1218: fi
! 1219: else
! 1220: sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
! 1221: fi
! 1222: need_lib_prefix=unknown
! 1223: hardcode_into_libs=no
! 1224:
! 1225: # when you set need_version to no, make sure it does not cause -set_version
! 1226: # flags to be left without arguments
! 1227: need_version=unknown
! 1228:
! 1229: case $host_os in
! 1230: aix3*)
! 1231: version_type=linux
! 1232: library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
! 1233: shlibpath_var=LIBPATH
! 1234:
! 1235: # AIX 3 has no versioning support, so we append a major version to the name.
! 1236: soname_spec='${libname}${release}${shared_ext}$major'
! 1237: ;;
! 1238:
! 1239: aix4* | aix5*)
! 1240: version_type=linux
! 1241: need_lib_prefix=no
! 1242: need_version=no
! 1243: hardcode_into_libs=yes
! 1244: if test "$host_cpu" = ia64; then
! 1245: # AIX 5 supports IA64
! 1246: library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
! 1247: shlibpath_var=LD_LIBRARY_PATH
! 1248: else
! 1249: # With GCC up to 2.95.x, collect2 would create an import file
! 1250: # for dependence libraries. The import file would start with
! 1251: # the line `#! .'. This would cause the generated library to
! 1252: # depend on `.', always an invalid library. This was fixed in
! 1253: # development snapshots of GCC prior to 3.0.
! 1254: case $host_os in
! 1255: aix4 | aix4.[[01]] | aix4.[[01]].*)
! 1256: if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
! 1257: echo ' yes '
! 1258: echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
! 1259: :
! 1260: else
! 1261: can_build_shared=no
! 1262: fi
! 1263: ;;
! 1264: esac
! 1265: # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
! 1266: # soname into executable. Probably we can add versioning support to
! 1267: # collect2, so additional links can be useful in future.
! 1268: if test "$aix_use_runtimelinking" = yes; then
! 1269: # If using run time linking (on AIX 4.2 or later) use lib<name>.so
! 1270: # instead of lib<name>.a to let people know that these are not
! 1271: # typical AIX shared libraries.
! 1272: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1273: else
! 1274: # We preserve .a as extension for shared libraries through AIX4.2
! 1275: # and later when we are not doing run time linking.
! 1276: library_names_spec='${libname}${release}.a $libname.a'
! 1277: soname_spec='${libname}${release}${shared_ext}$major'
! 1278: fi
! 1279: shlibpath_var=LIBPATH
! 1280: fi
! 1281: ;;
! 1282:
! 1283: amigaos*)
! 1284: library_names_spec='$libname.ixlibrary $libname.a'
! 1285: # Create ${libname}_ixlibrary.a entries in /sys/libs.
! 1286: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
! 1287: ;;
! 1288:
! 1289: beos*)
! 1290: library_names_spec='${libname}${shared_ext}'
! 1291: dynamic_linker="$host_os ld.so"
! 1292: shlibpath_var=LIBRARY_PATH
! 1293: ;;
! 1294:
! 1295: bsdi[[45]]*)
! 1296: version_type=linux
! 1297: need_version=no
! 1298: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1299: soname_spec='${libname}${release}${shared_ext}$major'
! 1300: finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
! 1301: shlibpath_var=LD_LIBRARY_PATH
! 1302: sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
! 1303: sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
! 1304: # the default ld.so.conf also contains /usr/contrib/lib and
! 1305: # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
! 1306: # libtool to hard-code these into programs
! 1307: ;;
! 1308:
! 1309: cygwin* | mingw* | pw32*)
! 1310: version_type=windows
! 1311: shrext_cmds=".dll"
! 1312: need_version=no
! 1313: need_lib_prefix=no
! 1314:
! 1315: case $GCC,$host_os in
! 1316: yes,cygwin* | yes,mingw* | yes,pw32*)
! 1317: library_names_spec='$libname.dll.a'
! 1318: # DLL is installed to $(libdir)/../bin by postinstall_cmds
! 1319: postinstall_cmds='base_file=`basename \${file}`~
! 1320: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
! 1321: dldir=$destdir/`dirname \$dlpath`~
! 1322: test -d \$dldir || mkdir -p \$dldir~
! 1323: $install_prog $dir/$dlname \$dldir/$dlname~
! 1324: chmod a+x \$dldir/$dlname'
! 1325: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
! 1326: dlpath=$dir/\$dldll~
! 1327: $rm \$dlpath'
! 1328: shlibpath_overrides_runpath=yes
! 1329:
! 1330: case $host_os in
! 1331: cygwin*)
! 1332: # Cygwin DLLs use 'cyg' prefix rather than 'lib'
! 1333: soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
! 1334: sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
! 1335: ;;
! 1336: mingw*)
! 1337: # MinGW DLLs use traditional 'lib' prefix
! 1338: soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
! 1339: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
! 1340: if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
! 1341: # It is most probably a Windows format PATH printed by
! 1342: # mingw gcc, but we are running on Cygwin. Gcc prints its search
! 1343: # path with ; separators, and with drive letters. We can handle the
! 1344: # drive letters (cygwin fileutils understands them), so leave them,
! 1345: # especially as we might pass files found there to a mingw objdump,
! 1346: # which wouldn't understand a cygwinified path. Ahh.
! 1347: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
! 1348: else
! 1349: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
! 1350: fi
! 1351: ;;
! 1352: pw32*)
! 1353: # pw32 DLLs use 'pw' prefix rather than 'lib'
! 1354: library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
! 1355: ;;
! 1356: esac
! 1357: ;;
! 1358:
! 1359: *)
! 1360: library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
! 1361: ;;
! 1362: esac
! 1363: dynamic_linker='Win32 ld.exe'
! 1364: # FIXME: first we should search . and the directory the executable is in
! 1365: shlibpath_var=PATH
! 1366: ;;
! 1367:
! 1368: darwin* | rhapsody*)
! 1369: dynamic_linker="$host_os dyld"
! 1370: version_type=darwin
! 1371: need_lib_prefix=no
! 1372: need_version=no
! 1373: library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
! 1374: soname_spec='${libname}${release}${major}$shared_ext'
! 1375: shlibpath_overrides_runpath=yes
! 1376: shlibpath_var=DYLD_LIBRARY_PATH
! 1377: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
! 1378: # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
! 1379: if test "$GCC" = yes; then
! 1380: sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
! 1381: else
! 1382: sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
! 1383: fi
! 1384: sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
! 1385: ;;
! 1386:
! 1387: dgux*)
! 1388: version_type=linux
! 1389: need_lib_prefix=no
! 1390: need_version=no
! 1391: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
! 1392: soname_spec='${libname}${release}${shared_ext}$major'
! 1393: shlibpath_var=LD_LIBRARY_PATH
! 1394: ;;
! 1395:
! 1396: freebsd1*)
! 1397: dynamic_linker=no
! 1398: ;;
! 1399:
! 1400: kfreebsd*-gnu)
! 1401: version_type=linux
! 1402: need_lib_prefix=no
! 1403: need_version=no
! 1404: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
! 1405: soname_spec='${libname}${release}${shared_ext}$major'
! 1406: shlibpath_var=LD_LIBRARY_PATH
! 1407: shlibpath_overrides_runpath=no
! 1408: hardcode_into_libs=yes
! 1409: dynamic_linker='GNU ld.so'
! 1410: ;;
! 1411:
! 1412: freebsd* | dragonfly*)
! 1413: # DragonFly does not have aout. When/if they implement a new
! 1414: # versioning mechanism, adjust this.
! 1415: if test -x /usr/bin/objformat; then
! 1416: objformat=`/usr/bin/objformat`
! 1417: else
! 1418: case $host_os in
! 1419: freebsd[[123]]*) objformat=aout ;;
! 1420: *) objformat=elf ;;
! 1421: esac
! 1422: fi
! 1423: version_type=freebsd-$objformat
! 1424: case $version_type in
! 1425: freebsd-elf*)
! 1426: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
! 1427: need_version=no
! 1428: need_lib_prefix=no
! 1429: ;;
! 1430: freebsd-*)
! 1431: library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
! 1432: need_version=yes
! 1433: ;;
! 1434: esac
! 1435: shlibpath_var=LD_LIBRARY_PATH
! 1436: case $host_os in
! 1437: freebsd2*)
! 1438: shlibpath_overrides_runpath=yes
! 1439: ;;
! 1440: freebsd3.[[01]]* | freebsdelf3.[[01]]*)
! 1441: shlibpath_overrides_runpath=yes
! 1442: hardcode_into_libs=yes
! 1443: ;;
! 1444: freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
! 1445: freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
! 1446: shlibpath_overrides_runpath=no
! 1447: hardcode_into_libs=yes
! 1448: ;;
! 1449: freebsd*) # from 4.6 on
! 1450: shlibpath_overrides_runpath=yes
! 1451: hardcode_into_libs=yes
! 1452: ;;
! 1453: esac
! 1454: ;;
! 1455:
! 1456: gnu*)
! 1457: version_type=linux
! 1458: need_lib_prefix=no
! 1459: need_version=no
! 1460: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
! 1461: soname_spec='${libname}${release}${shared_ext}$major'
! 1462: shlibpath_var=LD_LIBRARY_PATH
! 1463: hardcode_into_libs=yes
! 1464: ;;
! 1465:
! 1466: hpux9* | hpux10* | hpux11*)
! 1467: # Give a soname corresponding to the major version so that dld.sl refuses to
! 1468: # link against other versions.
! 1469: version_type=sunos
! 1470: need_lib_prefix=no
! 1471: need_version=no
! 1472: case $host_cpu in
! 1473: ia64*)
! 1474: shrext_cmds='.so'
! 1475: hardcode_into_libs=yes
! 1476: dynamic_linker="$host_os dld.so"
! 1477: shlibpath_var=LD_LIBRARY_PATH
! 1478: shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
! 1479: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1480: soname_spec='${libname}${release}${shared_ext}$major'
! 1481: if test "X$HPUX_IA64_MODE" = X32; then
! 1482: sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
! 1483: else
! 1484: sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
! 1485: fi
! 1486: sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
! 1487: ;;
! 1488: hppa*64*)
! 1489: shrext_cmds='.sl'
! 1490: hardcode_into_libs=yes
! 1491: dynamic_linker="$host_os dld.sl"
! 1492: shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
! 1493: shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
! 1494: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1495: soname_spec='${libname}${release}${shared_ext}$major'
! 1496: sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
! 1497: sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
! 1498: ;;
! 1499: *)
! 1500: shrext_cmds='.sl'
! 1501: dynamic_linker="$host_os dld.sl"
! 1502: shlibpath_var=SHLIB_PATH
! 1503: shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
! 1504: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1505: soname_spec='${libname}${release}${shared_ext}$major'
! 1506: ;;
! 1507: esac
! 1508: # HP-UX runs *really* slowly unless shared libraries are mode 555.
! 1509: postinstall_cmds='chmod 555 $lib'
! 1510: ;;
! 1511:
! 1512: interix3*)
! 1513: version_type=linux
! 1514: need_lib_prefix=no
! 1515: need_version=no
! 1516: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
! 1517: soname_spec='${libname}${release}${shared_ext}$major'
! 1518: dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
! 1519: shlibpath_var=LD_LIBRARY_PATH
! 1520: shlibpath_overrides_runpath=no
! 1521: hardcode_into_libs=yes
! 1522: ;;
! 1523:
! 1524: irix5* | irix6* | nonstopux*)
! 1525: case $host_os in
! 1526: nonstopux*) version_type=nonstopux ;;
! 1527: *)
! 1528: if test "$lt_cv_prog_gnu_ld" = yes; then
! 1529: version_type=linux
! 1530: else
! 1531: version_type=irix
! 1532: fi ;;
! 1533: esac
! 1534: need_lib_prefix=no
! 1535: need_version=no
! 1536: soname_spec='${libname}${release}${shared_ext}$major'
! 1537: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
! 1538: case $host_os in
! 1539: irix5* | nonstopux*)
! 1540: libsuff= shlibsuff=
! 1541: ;;
! 1542: *)
! 1543: case $LD in # libtool.m4 will add one of these switches to LD
! 1544: *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
! 1545: libsuff= shlibsuff= libmagic=32-bit;;
! 1546: *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
! 1547: libsuff=32 shlibsuff=N32 libmagic=N32;;
! 1548: *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
! 1549: libsuff=64 shlibsuff=64 libmagic=64-bit;;
! 1550: *) libsuff= shlibsuff= libmagic=never-match;;
! 1551: esac
! 1552: ;;
! 1553: esac
! 1554: shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
! 1555: shlibpath_overrides_runpath=no
! 1556: sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
! 1557: sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
! 1558: hardcode_into_libs=yes
! 1559: ;;
! 1560:
! 1561: # No shared lib support for Linux oldld, aout, or coff.
! 1562: linux*oldld* | linux*aout* | linux*coff*)
! 1563: dynamic_linker=no
! 1564: ;;
! 1565:
! 1566: # This must be Linux ELF.
! 1567: linux*)
! 1568: version_type=linux
! 1569: need_lib_prefix=no
! 1570: need_version=no
! 1571: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1572: soname_spec='${libname}${release}${shared_ext}$major'
! 1573: finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
! 1574: shlibpath_var=LD_LIBRARY_PATH
! 1575: shlibpath_overrides_runpath=no
! 1576: # This implies no fast_install, which is unacceptable.
! 1577: # Some rework will be needed to allow for fast_install
! 1578: # before this can be enabled.
! 1579: hardcode_into_libs=yes
! 1580:
! 1581: # find out which ABI we are using
! 1582: libsuff=
! 1583: case "$host_cpu" in
! 1584: x86_64*|s390x*|powerpc64*)
! 1585: echo '[#]line __oline__ "configure"' > conftest.$ac_ext
! 1586: if AC_TRY_EVAL(ac_compile); then
! 1587: case `/usr/bin/file conftest.$ac_objext` in
! 1588: *64-bit*)
! 1589: libsuff=64
! 1590: sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
! 1591: ;;
! 1592: esac
! 1593: fi
! 1594: rm -rf conftest*
! 1595: ;;
! 1596: esac
! 1597:
! 1598: # Append ld.so.conf contents to the search path
! 1599: if test -f /etc/ld.so.conf; then
! 1600: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
! 1601: sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
! 1602: fi
! 1603:
! 1604: # We used to test for /lib/ld.so.1 and disable shared libraries on
! 1605: # powerpc, because MkLinux only supported shared libraries with the
! 1606: # GNU dynamic linker. Since this was broken with cross compilers,
! 1607: # most powerpc-linux boxes support dynamic linking these days and
! 1608: # people can always --disable-shared, the test was removed, and we
! 1609: # assume the GNU/Linux dynamic linker is in use.
! 1610: dynamic_linker='GNU/Linux ld.so'
! 1611: ;;
! 1612:
! 1613: knetbsd*-gnu)
! 1614: version_type=linux
! 1615: need_lib_prefix=no
! 1616: need_version=no
! 1617: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
! 1618: soname_spec='${libname}${release}${shared_ext}$major'
! 1619: shlibpath_var=LD_LIBRARY_PATH
! 1620: shlibpath_overrides_runpath=no
! 1621: hardcode_into_libs=yes
! 1622: dynamic_linker='GNU ld.so'
! 1623: ;;
! 1624:
! 1625: netbsd*)
! 1626: version_type=sunos
! 1627: need_lib_prefix=no
! 1628: need_version=no
! 1629: if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
! 1630: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
! 1631: finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
! 1632: dynamic_linker='NetBSD (a.out) ld.so'
! 1633: else
! 1634: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
! 1635: soname_spec='${libname}${release}${shared_ext}$major'
! 1636: dynamic_linker='NetBSD ld.elf_so'
! 1637: fi
! 1638: shlibpath_var=LD_LIBRARY_PATH
! 1639: shlibpath_overrides_runpath=yes
! 1640: hardcode_into_libs=yes
! 1641: ;;
! 1642:
! 1643: newsos6)
! 1644: version_type=linux
! 1645: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1646: shlibpath_var=LD_LIBRARY_PATH
! 1647: shlibpath_overrides_runpath=yes
! 1648: ;;
! 1649:
! 1650: nto-qnx*)
! 1651: version_type=linux
! 1652: need_lib_prefix=no
! 1653: need_version=no
! 1654: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1655: soname_spec='${libname}${release}${shared_ext}$major'
! 1656: shlibpath_var=LD_LIBRARY_PATH
! 1657: shlibpath_overrides_runpath=yes
! 1658: ;;
! 1659:
! 1660: openbsd*)
! 1661: version_type=sunos
! 1662: sys_lib_dlsearch_path_spec="/usr/lib"
! 1663: need_lib_prefix=no
! 1664: # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
! 1665: case $host_os in
! 1666: openbsd3.3 | openbsd3.3.*) need_version=yes ;;
! 1667: *) need_version=no ;;
! 1668: esac
! 1669: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
! 1670: finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
! 1671: shlibpath_var=LD_LIBRARY_PATH
! 1672: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
! 1673: case $host_os in
! 1674: openbsd2.[[89]] | openbsd2.[[89]].*)
! 1675: shlibpath_overrides_runpath=no
! 1676: ;;
! 1677: *)
! 1678: shlibpath_overrides_runpath=yes
! 1679: ;;
! 1680: esac
! 1681: else
! 1682: shlibpath_overrides_runpath=yes
! 1683: fi
! 1684: ;;
! 1685:
! 1686: os2*)
! 1687: libname_spec='$name'
! 1688: shrext_cmds=".dll"
! 1689: need_lib_prefix=no
! 1690: library_names_spec='$libname${shared_ext} $libname.a'
! 1691: dynamic_linker='OS/2 ld.exe'
! 1692: shlibpath_var=LIBPATH
! 1693: ;;
! 1694:
! 1695: osf3* | osf4* | osf5*)
! 1696: version_type=osf
! 1697: need_lib_prefix=no
! 1698: need_version=no
! 1699: soname_spec='${libname}${release}${shared_ext}$major'
! 1700: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1701: shlibpath_var=LD_LIBRARY_PATH
! 1702: sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
! 1703: sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
! 1704: ;;
! 1705:
! 1706: solaris*)
! 1707: version_type=linux
! 1708: need_lib_prefix=no
! 1709: need_version=no
! 1710: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1711: soname_spec='${libname}${release}${shared_ext}$major'
! 1712: shlibpath_var=LD_LIBRARY_PATH
! 1713: shlibpath_overrides_runpath=yes
! 1714: hardcode_into_libs=yes
! 1715: # ldd complains unless libraries are executable
! 1716: postinstall_cmds='chmod +x $lib'
! 1717: ;;
! 1718:
! 1719: sunos4*)
! 1720: version_type=sunos
! 1721: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
! 1722: finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
! 1723: shlibpath_var=LD_LIBRARY_PATH
! 1724: shlibpath_overrides_runpath=yes
! 1725: if test "$with_gnu_ld" = yes; then
! 1726: need_lib_prefix=no
! 1727: fi
! 1728: need_version=yes
! 1729: ;;
! 1730:
! 1731: sysv4 | sysv4.3*)
! 1732: version_type=linux
! 1733: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1734: soname_spec='${libname}${release}${shared_ext}$major'
! 1735: shlibpath_var=LD_LIBRARY_PATH
! 1736: case $host_vendor in
! 1737: sni)
! 1738: shlibpath_overrides_runpath=no
! 1739: need_lib_prefix=no
! 1740: export_dynamic_flag_spec='${wl}-Blargedynsym'
! 1741: runpath_var=LD_RUN_PATH
! 1742: ;;
! 1743: siemens)
! 1744: need_lib_prefix=no
! 1745: ;;
! 1746: motorola)
! 1747: need_lib_prefix=no
! 1748: need_version=no
! 1749: shlibpath_overrides_runpath=no
! 1750: sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
! 1751: ;;
! 1752: esac
! 1753: ;;
! 1754:
! 1755: sysv4*MP*)
! 1756: if test -d /usr/nec ;then
! 1757: version_type=linux
! 1758: library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
! 1759: soname_spec='$libname${shared_ext}.$major'
! 1760: shlibpath_var=LD_LIBRARY_PATH
! 1761: fi
! 1762: ;;
! 1763:
! 1764: sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
! 1765: version_type=freebsd-elf
! 1766: need_lib_prefix=no
! 1767: need_version=no
! 1768: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
! 1769: soname_spec='${libname}${release}${shared_ext}$major'
! 1770: shlibpath_var=LD_LIBRARY_PATH
! 1771: hardcode_into_libs=yes
! 1772: if test "$with_gnu_ld" = yes; then
! 1773: sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
! 1774: shlibpath_overrides_runpath=no
! 1775: else
! 1776: sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
! 1777: shlibpath_overrides_runpath=yes
! 1778: case $host_os in
! 1779: sco3.2v5*)
! 1780: sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
! 1781: ;;
! 1782: esac
! 1783: fi
! 1784: sys_lib_dlsearch_path_spec='/usr/lib'
! 1785: ;;
! 1786:
! 1787: uts4*)
! 1788: version_type=linux
! 1789: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1790: soname_spec='${libname}${release}${shared_ext}$major'
! 1791: shlibpath_var=LD_LIBRARY_PATH
! 1792: ;;
! 1793:
! 1794: *)
! 1795: dynamic_linker=no
! 1796: ;;
! 1797: esac
! 1798: AC_MSG_RESULT([$dynamic_linker])
! 1799: test "$dynamic_linker" = no && can_build_shared=no
! 1800:
! 1801: variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
! 1802: if test "$GCC" = yes; then
! 1803: variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
! 1804: fi
! 1805: ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
! 1806:
! 1807:
! 1808: # _LT_AC_TAGCONFIG
! 1809: # ----------------
! 1810: AC_DEFUN([_LT_AC_TAGCONFIG],
! 1811: [AC_ARG_WITH([tags],
! 1812: [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
! 1813: [include additional configurations @<:@automatic@:>@])],
! 1814: [tagnames="$withval"])
! 1815:
! 1816: if test -f "$ltmain" && test -n "$tagnames"; then
! 1817: if test ! -f "${ofile}"; then
! 1818: AC_MSG_WARN([output file `$ofile' does not exist])
! 1819: fi
! 1820:
! 1821: if test -z "$LTCC"; then
! 1822: eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
! 1823: if test -z "$LTCC"; then
! 1824: AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
! 1825: else
! 1826: AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
! 1827: fi
! 1828: fi
! 1829: if test -z "$LTCFLAGS"; then
! 1830: eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
! 1831: fi
! 1832:
! 1833: # Extract list of available tagged configurations in $ofile.
! 1834: # Note that this assumes the entire list is on one line.
! 1835: available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
! 1836:
! 1837: lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
! 1838: for tagname in $tagnames; do
! 1839: IFS="$lt_save_ifs"
! 1840: # Check whether tagname contains only valid characters
! 1841: case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
! 1842: "") ;;
! 1843: *) AC_MSG_ERROR([invalid tag name: $tagname])
! 1844: ;;
! 1845: esac
! 1846:
! 1847: if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
! 1848: then
! 1849: AC_MSG_ERROR([tag name \"$tagname\" already exists])
! 1850: fi
! 1851:
! 1852: # Update the list of available tags.
! 1853: if test -n "$tagname"; then
! 1854: echo appending configuration tag \"$tagname\" to $ofile
! 1855:
! 1856: case $tagname in
! 1857: CXX)
! 1858: if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
! 1859: ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
! 1860: (test "X$CXX" != "Xg++"))) ; then
! 1861: AC_LIBTOOL_LANG_CXX_CONFIG
! 1862: else
! 1863: tagname=""
! 1864: fi
! 1865: ;;
! 1866:
! 1867: F77)
! 1868: if test -n "$F77" && test "X$F77" != "Xno"; then
! 1869: AC_LIBTOOL_LANG_F77_CONFIG
! 1870: else
! 1871: tagname=""
! 1872: fi
! 1873: ;;
! 1874:
! 1875: GCJ)
! 1876: if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
! 1877: AC_LIBTOOL_LANG_GCJ_CONFIG
! 1878: else
! 1879: tagname=""
! 1880: fi
! 1881: ;;
! 1882:
! 1883: RC)
! 1884: AC_LIBTOOL_LANG_RC_CONFIG
! 1885: ;;
! 1886:
! 1887: *)
! 1888: AC_MSG_ERROR([Unsupported tag name: $tagname])
! 1889: ;;
! 1890: esac
! 1891:
! 1892: # Append the new tag name to the list of available tags.
! 1893: if test -n "$tagname" ; then
! 1894: available_tags="$available_tags $tagname"
! 1895: fi
! 1896: fi
! 1897: done
! 1898: IFS="$lt_save_ifs"
! 1899:
! 1900: # Now substitute the updated list of available tags.
! 1901: if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
! 1902: mv "${ofile}T" "$ofile"
! 1903: chmod +x "$ofile"
! 1904: else
! 1905: rm -f "${ofile}T"
! 1906: AC_MSG_ERROR([unable to update list of available tagged configurations.])
! 1907: fi
! 1908: fi
! 1909: ])# _LT_AC_TAGCONFIG
! 1910:
! 1911:
! 1912: # AC_LIBTOOL_DLOPEN
! 1913: # -----------------
! 1914: # enable checks for dlopen support
! 1915: AC_DEFUN([AC_LIBTOOL_DLOPEN],
! 1916: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
! 1917: ])# AC_LIBTOOL_DLOPEN
! 1918:
! 1919:
! 1920: # AC_LIBTOOL_WIN32_DLL
! 1921: # --------------------
! 1922: # declare package support for building win32 DLLs
! 1923: AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
! 1924: [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
! 1925: ])# AC_LIBTOOL_WIN32_DLL
! 1926:
! 1927:
! 1928: # AC_ENABLE_SHARED([DEFAULT])
! 1929: # ---------------------------
! 1930: # implement the --enable-shared flag
! 1931: # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
! 1932: AC_DEFUN([AC_ENABLE_SHARED],
! 1933: [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
! 1934: AC_ARG_ENABLE([shared],
! 1935: [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
! 1936: [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
! 1937: [p=${PACKAGE-default}
! 1938: case $enableval in
! 1939: yes) enable_shared=yes ;;
! 1940: no) enable_shared=no ;;
! 1941: *)
! 1942: enable_shared=no
! 1943: # Look at the argument we got. We use all the common list separators.
! 1944: lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
! 1945: for pkg in $enableval; do
! 1946: IFS="$lt_save_ifs"
! 1947: if test "X$pkg" = "X$p"; then
! 1948: enable_shared=yes
! 1949: fi
! 1950: done
! 1951: IFS="$lt_save_ifs"
! 1952: ;;
! 1953: esac],
! 1954: [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
! 1955: ])# AC_ENABLE_SHARED
! 1956:
! 1957:
! 1958: # AC_DISABLE_SHARED
! 1959: # -----------------
! 1960: # set the default shared flag to --disable-shared
! 1961: AC_DEFUN([AC_DISABLE_SHARED],
! 1962: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 1963: AC_ENABLE_SHARED(no)
! 1964: ])# AC_DISABLE_SHARED
! 1965:
! 1966:
! 1967: # AC_ENABLE_STATIC([DEFAULT])
! 1968: # ---------------------------
! 1969: # implement the --enable-static flag
! 1970: # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
! 1971: AC_DEFUN([AC_ENABLE_STATIC],
! 1972: [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
! 1973: AC_ARG_ENABLE([static],
! 1974: [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
! 1975: [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
! 1976: [p=${PACKAGE-default}
! 1977: case $enableval in
! 1978: yes) enable_static=yes ;;
! 1979: no) enable_static=no ;;
! 1980: *)
! 1981: enable_static=no
! 1982: # Look at the argument we got. We use all the common list separators.
! 1983: lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
! 1984: for pkg in $enableval; do
! 1985: IFS="$lt_save_ifs"
! 1986: if test "X$pkg" = "X$p"; then
! 1987: enable_static=yes
! 1988: fi
! 1989: done
! 1990: IFS="$lt_save_ifs"
! 1991: ;;
! 1992: esac],
! 1993: [enable_static=]AC_ENABLE_STATIC_DEFAULT)
! 1994: ])# AC_ENABLE_STATIC
! 1995:
! 1996:
! 1997: # AC_DISABLE_STATIC
! 1998: # -----------------
! 1999: # set the default static flag to --disable-static
! 2000: AC_DEFUN([AC_DISABLE_STATIC],
! 2001: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 2002: AC_ENABLE_STATIC(no)
! 2003: ])# AC_DISABLE_STATIC
! 2004:
! 2005:
! 2006: # AC_ENABLE_FAST_INSTALL([DEFAULT])
! 2007: # ---------------------------------
! 2008: # implement the --enable-fast-install flag
! 2009: # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
! 2010: AC_DEFUN([AC_ENABLE_FAST_INSTALL],
! 2011: [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
! 2012: AC_ARG_ENABLE([fast-install],
! 2013: [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
! 2014: [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
! 2015: [p=${PACKAGE-default}
! 2016: case $enableval in
! 2017: yes) enable_fast_install=yes ;;
! 2018: no) enable_fast_install=no ;;
! 2019: *)
! 2020: enable_fast_install=no
! 2021: # Look at the argument we got. We use all the common list separators.
! 2022: lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
! 2023: for pkg in $enableval; do
! 2024: IFS="$lt_save_ifs"
! 2025: if test "X$pkg" = "X$p"; then
! 2026: enable_fast_install=yes
! 2027: fi
! 2028: done
! 2029: IFS="$lt_save_ifs"
! 2030: ;;
! 2031: esac],
! 2032: [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
! 2033: ])# AC_ENABLE_FAST_INSTALL
! 2034:
! 2035:
! 2036: # AC_DISABLE_FAST_INSTALL
! 2037: # -----------------------
! 2038: # set the default to --disable-fast-install
! 2039: AC_DEFUN([AC_DISABLE_FAST_INSTALL],
! 2040: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 2041: AC_ENABLE_FAST_INSTALL(no)
! 2042: ])# AC_DISABLE_FAST_INSTALL
! 2043:
! 2044:
! 2045: # AC_LIBTOOL_PICMODE([MODE])
! 2046: # --------------------------
! 2047: # implement the --with-pic flag
! 2048: # MODE is either `yes' or `no'. If omitted, it defaults to `both'.
! 2049: AC_DEFUN([AC_LIBTOOL_PICMODE],
! 2050: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 2051: pic_mode=ifelse($#,1,$1,default)
! 2052: ])# AC_LIBTOOL_PICMODE
! 2053:
! 2054:
! 2055: # AC_PROG_EGREP
! 2056: # -------------
! 2057: # This is predefined starting with Autoconf 2.54, so this conditional
! 2058: # definition can be removed once we require Autoconf 2.54 or later.
! 2059: m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
! 2060: [AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
! 2061: [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
! 2062: then ac_cv_prog_egrep='grep -E'
! 2063: else ac_cv_prog_egrep='egrep'
! 2064: fi])
! 2065: EGREP=$ac_cv_prog_egrep
! 2066: AC_SUBST([EGREP])
! 2067: ])])
! 2068:
! 2069:
! 2070: # AC_PATH_TOOL_PREFIX
! 2071: # -------------------
! 2072: # find a file program which can recognise shared library
! 2073: AC_DEFUN([AC_PATH_TOOL_PREFIX],
! 2074: [AC_REQUIRE([AC_PROG_EGREP])dnl
! 2075: AC_MSG_CHECKING([for $1])
! 2076: AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
! 2077: [case $MAGIC_CMD in
! 2078: [[\\/*] | ?:[\\/]*])
! 2079: lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
! 2080: ;;
! 2081: *)
! 2082: lt_save_MAGIC_CMD="$MAGIC_CMD"
! 2083: lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
! 2084: dnl $ac_dummy forces splitting on constant user-supplied paths.
! 2085: dnl POSIX.2 word splitting is done only on the output of word expansions,
! 2086: dnl not every word. This closes a longstanding sh security hole.
! 2087: ac_dummy="ifelse([$2], , $PATH, [$2])"
! 2088: for ac_dir in $ac_dummy; do
! 2089: IFS="$lt_save_ifs"
! 2090: test -z "$ac_dir" && ac_dir=.
! 2091: if test -f $ac_dir/$1; then
! 2092: lt_cv_path_MAGIC_CMD="$ac_dir/$1"
! 2093: if test -n "$file_magic_test_file"; then
! 2094: case $deplibs_check_method in
! 2095: "file_magic "*)
! 2096: file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
! 2097: MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
! 2098: if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
! 2099: $EGREP "$file_magic_regex" > /dev/null; then
! 2100: :
! 2101: else
! 2102: cat <<EOF 1>&2
! 2103:
! 2104: *** Warning: the command libtool uses to detect shared libraries,
! 2105: *** $file_magic_cmd, produces output that libtool cannot recognize.
! 2106: *** The result is that libtool may fail to recognize shared libraries
! 2107: *** as such. This will affect the creation of libtool libraries that
! 2108: *** depend on shared libraries, but programs linked with such libtool
! 2109: *** libraries will work regardless of this problem. Nevertheless, you
! 2110: *** may want to report the problem to your system manager and/or to
! 2111: *** bug-libtool@gnu.org
! 2112:
! 2113: EOF
! 2114: fi ;;
! 2115: esac
! 2116: fi
! 2117: break
! 2118: fi
! 2119: done
! 2120: IFS="$lt_save_ifs"
! 2121: MAGIC_CMD="$lt_save_MAGIC_CMD"
! 2122: ;;
! 2123: esac])
! 2124: MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
! 2125: if test -n "$MAGIC_CMD"; then
! 2126: AC_MSG_RESULT($MAGIC_CMD)
! 2127: else
! 2128: AC_MSG_RESULT(no)
! 2129: fi
! 2130: ])# AC_PATH_TOOL_PREFIX
! 2131:
! 2132:
! 2133: # AC_PATH_MAGIC
! 2134: # -------------
! 2135: # find a file program which can recognise a shared library
! 2136: AC_DEFUN([AC_PATH_MAGIC],
! 2137: [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
! 2138: if test -z "$lt_cv_path_MAGIC_CMD"; then
! 2139: if test -n "$ac_tool_prefix"; then
! 2140: AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
! 2141: else
! 2142: MAGIC_CMD=:
! 2143: fi
! 2144: fi
! 2145: ])# AC_PATH_MAGIC
! 2146:
! 2147:
! 2148: # AC_PROG_LD
! 2149: # ----------
! 2150: # find the pathname to the GNU or non-GNU linker
! 2151: AC_DEFUN([AC_PROG_LD],
! 2152: [AC_ARG_WITH([gnu-ld],
! 2153: [AC_HELP_STRING([--with-gnu-ld],
! 2154: [assume the C compiler uses GNU ld @<:@default=no@:>@])],
! 2155: [test "$withval" = no || with_gnu_ld=yes],
! 2156: [with_gnu_ld=no])
! 2157: AC_REQUIRE([LT_AC_PROG_SED])dnl
! 2158: AC_REQUIRE([AC_PROG_CC])dnl
! 2159: AC_REQUIRE([AC_CANONICAL_HOST])dnl
! 2160: AC_REQUIRE([AC_CANONICAL_BUILD])dnl
! 2161: ac_prog=ld
! 2162: if test "$GCC" = yes; then
! 2163: # Check if gcc -print-prog-name=ld gives a path.
! 2164: AC_MSG_CHECKING([for ld used by $CC])
! 2165: case $host in
! 2166: *-*-mingw*)
! 2167: # gcc leaves a trailing carriage return which upsets mingw
! 2168: ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
! 2169: *)
! 2170: ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
! 2171: esac
! 2172: case $ac_prog in
! 2173: # Accept absolute paths.
! 2174: [[\\/]]* | ?:[[\\/]]*)
! 2175: re_direlt='/[[^/]][[^/]]*/\.\./'
! 2176: # Canonicalize the pathname of ld
! 2177: ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
! 2178: while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
! 2179: ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
! 2180: done
! 2181: test -z "$LD" && LD="$ac_prog"
! 2182: ;;
! 2183: "")
! 2184: # If it fails, then pretend we aren't using GCC.
! 2185: ac_prog=ld
! 2186: ;;
! 2187: *)
! 2188: # If it is relative, then search for the first ld in PATH.
! 2189: with_gnu_ld=unknown
! 2190: ;;
! 2191: esac
! 2192: elif test "$with_gnu_ld" = yes; then
! 2193: AC_MSG_CHECKING([for GNU ld])
! 2194: else
! 2195: AC_MSG_CHECKING([for non-GNU ld])
! 2196: fi
! 2197: AC_CACHE_VAL(lt_cv_path_LD,
! 2198: [if test -z "$LD"; then
! 2199: lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
! 2200: for ac_dir in $PATH; do
! 2201: IFS="$lt_save_ifs"
! 2202: test -z "$ac_dir" && ac_dir=.
! 2203: if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
! 2204: lt_cv_path_LD="$ac_dir/$ac_prog"
! 2205: # Check to see if the program is GNU ld. I'd rather use --version,
! 2206: # but apparently some variants of GNU ld only accept -v.
! 2207: # Break only if it was the GNU/non-GNU ld that we prefer.
! 2208: case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
! 2209: *GNU* | *'with BFD'*)
! 2210: test "$with_gnu_ld" != no && break
! 2211: ;;
! 2212: *)
! 2213: test "$with_gnu_ld" != yes && break
! 2214: ;;
! 2215: esac
! 2216: fi
! 2217: done
! 2218: IFS="$lt_save_ifs"
! 2219: else
! 2220: lt_cv_path_LD="$LD" # Let the user override the test with a path.
! 2221: fi])
! 2222: LD="$lt_cv_path_LD"
! 2223: if test -n "$LD"; then
! 2224: AC_MSG_RESULT($LD)
! 2225: else
! 2226: AC_MSG_RESULT(no)
! 2227: fi
! 2228: test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
! 2229: AC_PROG_LD_GNU
! 2230: ])# AC_PROG_LD
! 2231:
! 2232:
! 2233: # AC_PROG_LD_GNU
! 2234: # --------------
! 2235: AC_DEFUN([AC_PROG_LD_GNU],
! 2236: [AC_REQUIRE([AC_PROG_EGREP])dnl
! 2237: AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
! 2238: [# I'd rather use --version here, but apparently some GNU lds only accept -v.
! 2239: case `$LD -v 2>&1 </dev/null` in
! 2240: *GNU* | *'with BFD'*)
! 2241: lt_cv_prog_gnu_ld=yes
! 2242: ;;
! 2243: *)
! 2244: lt_cv_prog_gnu_ld=no
! 2245: ;;
! 2246: esac])
! 2247: with_gnu_ld=$lt_cv_prog_gnu_ld
! 2248: ])# AC_PROG_LD_GNU
! 2249:
! 2250:
! 2251: # AC_PROG_LD_RELOAD_FLAG
! 2252: # ----------------------
! 2253: # find reload flag for linker
! 2254: # -- PORTME Some linkers may need a different reload flag.
! 2255: AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
! 2256: [AC_CACHE_CHECK([for $LD option to reload object files],
! 2257: lt_cv_ld_reload_flag,
! 2258: [lt_cv_ld_reload_flag='-r'])
! 2259: reload_flag=$lt_cv_ld_reload_flag
! 2260: case $reload_flag in
! 2261: "" | " "*) ;;
! 2262: *) reload_flag=" $reload_flag" ;;
! 2263: esac
! 2264: reload_cmds='$LD$reload_flag -o $output$reload_objs'
! 2265: case $host_os in
! 2266: darwin*)
! 2267: if test "$GCC" = yes; then
! 2268: reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
! 2269: else
! 2270: reload_cmds='$LD$reload_flag -o $output$reload_objs'
! 2271: fi
! 2272: ;;
! 2273: esac
! 2274: ])# AC_PROG_LD_RELOAD_FLAG
! 2275:
! 2276:
! 2277: # AC_DEPLIBS_CHECK_METHOD
! 2278: # -----------------------
! 2279: # how to check for library dependencies
! 2280: # -- PORTME fill in with the dynamic library characteristics
! 2281: AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
! 2282: [AC_CACHE_CHECK([how to recognise dependent libraries],
! 2283: lt_cv_deplibs_check_method,
! 2284: [lt_cv_file_magic_cmd='$MAGIC_CMD'
! 2285: lt_cv_file_magic_test_file=
! 2286: lt_cv_deplibs_check_method='unknown'
! 2287: # Need to set the preceding variable on all platforms that support
! 2288: # interlibrary dependencies.
! 2289: # 'none' -- dependencies not supported.
! 2290: # `unknown' -- same as none, but documents that we really don't know.
! 2291: # 'pass_all' -- all dependencies passed with no checks.
! 2292: # 'test_compile' -- check by making test program.
! 2293: # 'file_magic [[regex]]' -- check by looking for files in library path
! 2294: # which responds to the $file_magic_cmd with a given extended regex.
! 2295: # If you have `file' or equivalent on your system and you're not sure
! 2296: # whether `pass_all' will *always* work, you probably want this one.
! 2297:
! 2298: case $host_os in
! 2299: aix4* | aix5*)
! 2300: lt_cv_deplibs_check_method=pass_all
! 2301: ;;
! 2302:
! 2303: beos*)
! 2304: lt_cv_deplibs_check_method=pass_all
! 2305: ;;
! 2306:
! 2307: bsdi[[45]]*)
! 2308: lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
! 2309: lt_cv_file_magic_cmd='/usr/bin/file -L'
! 2310: lt_cv_file_magic_test_file=/shlib/libc.so
! 2311: ;;
! 2312:
! 2313: cygwin*)
! 2314: # func_win32_libid is a shell function defined in ltmain.sh
! 2315: lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
! 2316: lt_cv_file_magic_cmd='func_win32_libid'
! 2317: ;;
! 2318:
! 2319: mingw* | pw32*)
! 2320: # Base MSYS/MinGW do not provide the 'file' command needed by
! 2321: # func_win32_libid shell function, so use a weaker test based on 'objdump'.
! 2322: lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
! 2323: lt_cv_file_magic_cmd='$OBJDUMP -f'
! 2324: ;;
! 2325:
! 2326: darwin* | rhapsody*)
! 2327: lt_cv_deplibs_check_method=pass_all
! 2328: ;;
! 2329:
! 2330: freebsd* | kfreebsd*-gnu | dragonfly*)
! 2331: if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
! 2332: case $host_cpu in
! 2333: i*86 )
! 2334: # Not sure whether the presence of OpenBSD here was a mistake.
! 2335: # Let's accept both of them until this is cleared up.
! 2336: lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
! 2337: lt_cv_file_magic_cmd=/usr/bin/file
! 2338: lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
! 2339: ;;
! 2340: esac
! 2341: else
! 2342: lt_cv_deplibs_check_method=pass_all
! 2343: fi
! 2344: ;;
! 2345:
! 2346: gnu*)
! 2347: lt_cv_deplibs_check_method=pass_all
! 2348: ;;
! 2349:
! 2350: hpux10.20* | hpux11*)
! 2351: lt_cv_file_magic_cmd=/usr/bin/file
! 2352: case $host_cpu in
! 2353: ia64*)
! 2354: lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
! 2355: lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
! 2356: ;;
! 2357: hppa*64*)
! 2358: [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
! 2359: lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
! 2360: ;;
! 2361: *)
! 2362: lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
! 2363: lt_cv_file_magic_test_file=/usr/lib/libc.sl
! 2364: ;;
! 2365: esac
! 2366: ;;
! 2367:
! 2368: interix3*)
! 2369: # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
! 2370: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
! 2371: ;;
! 2372:
! 2373: irix5* | irix6* | nonstopux*)
! 2374: case $LD in
! 2375: *-32|*"-32 ") libmagic=32-bit;;
! 2376: *-n32|*"-n32 ") libmagic=N32;;
! 2377: *-64|*"-64 ") libmagic=64-bit;;
! 2378: *) libmagic=never-match;;
! 2379: esac
! 2380: lt_cv_deplibs_check_method=pass_all
! 2381: ;;
! 2382:
! 2383: # This must be Linux ELF.
! 2384: linux*)
! 2385: lt_cv_deplibs_check_method=pass_all
! 2386: ;;
! 2387:
! 2388: netbsd*)
! 2389: if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
! 2390: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
! 2391: else
! 2392: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
! 2393: fi
! 2394: ;;
! 2395:
! 2396: newos6*)
! 2397: lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
! 2398: lt_cv_file_magic_cmd=/usr/bin/file
! 2399: lt_cv_file_magic_test_file=/usr/lib/libnls.so
! 2400: ;;
! 2401:
! 2402: nto-qnx*)
! 2403: lt_cv_deplibs_check_method=unknown
! 2404: ;;
! 2405:
! 2406: openbsd*)
! 2407: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
! 2408: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
! 2409: else
! 2410: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
! 2411: fi
! 2412: ;;
! 2413:
! 2414: osf3* | osf4* | osf5*)
! 2415: lt_cv_deplibs_check_method=pass_all
! 2416: ;;
! 2417:
! 2418: solaris*)
! 2419: lt_cv_deplibs_check_method=pass_all
! 2420: ;;
! 2421:
! 2422: sysv4 | sysv4.3*)
! 2423: case $host_vendor in
! 2424: motorola)
! 2425: lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
! 2426: lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
! 2427: ;;
! 2428: ncr)
! 2429: lt_cv_deplibs_check_method=pass_all
! 2430: ;;
! 2431: sequent)
! 2432: lt_cv_file_magic_cmd='/bin/file'
! 2433: lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
! 2434: ;;
! 2435: sni)
! 2436: lt_cv_file_magic_cmd='/bin/file'
! 2437: lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
! 2438: lt_cv_file_magic_test_file=/lib/libc.so
! 2439: ;;
! 2440: siemens)
! 2441: lt_cv_deplibs_check_method=pass_all
! 2442: ;;
! 2443: pc)
! 2444: lt_cv_deplibs_check_method=pass_all
! 2445: ;;
! 2446: esac
! 2447: ;;
! 2448:
! 2449: sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
! 2450: lt_cv_deplibs_check_method=pass_all
! 2451: ;;
! 2452: esac
! 2453: ])
! 2454: file_magic_cmd=$lt_cv_file_magic_cmd
! 2455: deplibs_check_method=$lt_cv_deplibs_check_method
! 2456: test -z "$deplibs_check_method" && deplibs_check_method=unknown
! 2457: ])# AC_DEPLIBS_CHECK_METHOD
! 2458:
! 2459:
! 2460: # AC_PROG_NM
! 2461: # ----------
! 2462: # find the pathname to a BSD-compatible name lister
! 2463: AC_DEFUN([AC_PROG_NM],
! 2464: [AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
! 2465: [if test -n "$NM"; then
! 2466: # Let the user override the test.
! 2467: lt_cv_path_NM="$NM"
! 2468: else
! 2469: lt_nm_to_check="${ac_tool_prefix}nm"
! 2470: if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
! 2471: lt_nm_to_check="$lt_nm_to_check nm"
! 2472: fi
! 2473: for lt_tmp_nm in $lt_nm_to_check; do
! 2474: lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
! 2475: for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
! 2476: IFS="$lt_save_ifs"
! 2477: test -z "$ac_dir" && ac_dir=.
! 2478: tmp_nm="$ac_dir/$lt_tmp_nm"
! 2479: if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
! 2480: # Check to see if the nm accepts a BSD-compat flag.
! 2481: # Adding the `sed 1q' prevents false positives on HP-UX, which says:
! 2482: # nm: unknown option "B" ignored
! 2483: # Tru64's nm complains that /dev/null is an invalid object file
! 2484: case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
! 2485: */dev/null* | *'Invalid file or object type'*)
! 2486: lt_cv_path_NM="$tmp_nm -B"
! 2487: break
! 2488: ;;
! 2489: *)
! 2490: case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
! 2491: */dev/null*)
! 2492: lt_cv_path_NM="$tmp_nm -p"
! 2493: break
! 2494: ;;
! 2495: *)
! 2496: lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
! 2497: continue # so that we can try to find one that supports BSD flags
! 2498: ;;
! 2499: esac
! 2500: ;;
! 2501: esac
! 2502: fi
! 2503: done
! 2504: IFS="$lt_save_ifs"
! 2505: done
! 2506: test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
! 2507: fi])
! 2508: NM="$lt_cv_path_NM"
! 2509: ])# AC_PROG_NM
! 2510:
! 2511:
! 2512: # AC_CHECK_LIBM
! 2513: # -------------
! 2514: # check for math library
! 2515: AC_DEFUN([AC_CHECK_LIBM],
! 2516: [AC_REQUIRE([AC_CANONICAL_HOST])dnl
! 2517: LIBM=
! 2518: case $host in
! 2519: *-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
! 2520: # These system don't have libm, or don't need it
! 2521: ;;
! 2522: *-ncr-sysv4.3*)
! 2523: AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
! 2524: AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
! 2525: ;;
! 2526: *)
! 2527: AC_CHECK_LIB(m, cos, LIBM="-lm")
! 2528: ;;
! 2529: esac
! 2530: ])# AC_CHECK_LIBM
! 2531:
! 2532:
! 2533: # AC_LIBLTDL_CONVENIENCE([DIRECTORY])
! 2534: # -----------------------------------
! 2535: # sets LIBLTDL to the link flags for the libltdl convenience library and
! 2536: # LTDLINCL to the include flags for the libltdl header and adds
! 2537: # --enable-ltdl-convenience to the configure arguments. Note that
! 2538: # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
! 2539: # it is assumed to be `libltdl'. LIBLTDL will be prefixed with
! 2540: # '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
! 2541: # (note the single quotes!). If your package is not flat and you're not
! 2542: # using automake, define top_builddir and top_srcdir appropriately in
! 2543: # the Makefiles.
! 2544: AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
! 2545: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 2546: case $enable_ltdl_convenience in
! 2547: no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
! 2548: "") enable_ltdl_convenience=yes
! 2549: ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
! 2550: esac
! 2551: LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
! 2552: LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
! 2553: # For backwards non-gettext consistent compatibility...
! 2554: INCLTDL="$LTDLINCL"
! 2555: ])# AC_LIBLTDL_CONVENIENCE
! 2556:
! 2557:
! 2558: # AC_LIBLTDL_INSTALLABLE([DIRECTORY])
! 2559: # -----------------------------------
! 2560: # sets LIBLTDL to the link flags for the libltdl installable library and
! 2561: # LTDLINCL to the include flags for the libltdl header and adds
! 2562: # --enable-ltdl-install to the configure arguments. Note that
! 2563: # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
! 2564: # and an installed libltdl is not found, it is assumed to be `libltdl'.
! 2565: # LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
! 2566: # '${top_srcdir}/' (note the single quotes!). If your package is not
! 2567: # flat and you're not using automake, define top_builddir and top_srcdir
! 2568: # appropriately in the Makefiles.
! 2569: # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
! 2570: AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
! 2571: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 2572: AC_CHECK_LIB(ltdl, lt_dlinit,
! 2573: [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
! 2574: [if test x"$enable_ltdl_install" = xno; then
! 2575: AC_MSG_WARN([libltdl not installed, but installation disabled])
! 2576: else
! 2577: enable_ltdl_install=yes
! 2578: fi
! 2579: ])
! 2580: if test x"$enable_ltdl_install" = x"yes"; then
! 2581: ac_configure_args="$ac_configure_args --enable-ltdl-install"
! 2582: LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
! 2583: LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
! 2584: else
! 2585: ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
! 2586: LIBLTDL="-lltdl"
! 2587: LTDLINCL=
! 2588: fi
! 2589: # For backwards non-gettext consistent compatibility...
! 2590: INCLTDL="$LTDLINCL"
! 2591: ])# AC_LIBLTDL_INSTALLABLE
! 2592:
! 2593:
! 2594: # AC_LIBTOOL_CXX
! 2595: # --------------
! 2596: # enable support for C++ libraries
! 2597: AC_DEFUN([AC_LIBTOOL_CXX],
! 2598: [AC_REQUIRE([_LT_AC_LANG_CXX])
! 2599: ])# AC_LIBTOOL_CXX
! 2600:
! 2601:
! 2602: # _LT_AC_LANG_CXX
! 2603: # ---------------
! 2604: AC_DEFUN([_LT_AC_LANG_CXX],
! 2605: [AC_REQUIRE([AC_PROG_CXX])
! 2606: AC_REQUIRE([_LT_AC_PROG_CXXCPP])
! 2607: _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
! 2608: ])# _LT_AC_LANG_CXX
! 2609:
! 2610: # _LT_AC_PROG_CXXCPP
! 2611: # ------------------
! 2612: AC_DEFUN([_LT_AC_PROG_CXXCPP],
! 2613: [
! 2614: AC_REQUIRE([AC_PROG_CXX])
! 2615: if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
! 2616: ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
! 2617: (test "X$CXX" != "Xg++"))) ; then
! 2618: AC_PROG_CXXCPP
! 2619: fi
! 2620: ])# _LT_AC_PROG_CXXCPP
! 2621:
! 2622: # AC_LIBTOOL_F77
! 2623: # --------------
! 2624: # enable support for Fortran 77 libraries
! 2625: AC_DEFUN([AC_LIBTOOL_F77],
! 2626: [AC_REQUIRE([_LT_AC_LANG_F77])
! 2627: ])# AC_LIBTOOL_F77
! 2628:
! 2629:
! 2630: # _LT_AC_LANG_F77
! 2631: # ---------------
! 2632: AC_DEFUN([_LT_AC_LANG_F77],
! 2633: [AC_REQUIRE([AC_PROG_F77])
! 2634: _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
! 2635: ])# _LT_AC_LANG_F77
! 2636:
! 2637:
! 2638: # AC_LIBTOOL_GCJ
! 2639: # --------------
! 2640: # enable support for GCJ libraries
! 2641: AC_DEFUN([AC_LIBTOOL_GCJ],
! 2642: [AC_REQUIRE([_LT_AC_LANG_GCJ])
! 2643: ])# AC_LIBTOOL_GCJ
! 2644:
! 2645:
! 2646: # _LT_AC_LANG_GCJ
! 2647: # ---------------
! 2648: AC_DEFUN([_LT_AC_LANG_GCJ],
! 2649: [AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
! 2650: [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
! 2651: [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
! 2652: [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
! 2653: [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
! 2654: [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
! 2655: _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
! 2656: ])# _LT_AC_LANG_GCJ
! 2657:
! 2658:
! 2659: # AC_LIBTOOL_RC
! 2660: # -------------
! 2661: # enable support for Windows resource files
! 2662: AC_DEFUN([AC_LIBTOOL_RC],
! 2663: [AC_REQUIRE([LT_AC_PROG_RC])
! 2664: _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
! 2665: ])# AC_LIBTOOL_RC
! 2666:
! 2667:
! 2668: # AC_LIBTOOL_LANG_C_CONFIG
! 2669: # ------------------------
! 2670: # Ensure that the configuration vars for the C compiler are
! 2671: # suitably defined. Those variables are subsequently used by
! 2672: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 2673: AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
! 2674: AC_DEFUN([_LT_AC_LANG_C_CONFIG],
! 2675: [lt_save_CC="$CC"
! 2676: AC_LANG_PUSH(C)
! 2677:
! 2678: # Source file extension for C test sources.
! 2679: ac_ext=c
! 2680:
! 2681: # Object file extension for compiled C test sources.
! 2682: objext=o
! 2683: _LT_AC_TAGVAR(objext, $1)=$objext
! 2684:
! 2685: # Code to be used in simple compile tests
! 2686: lt_simple_compile_test_code="int some_variable = 0;\n"
! 2687:
! 2688: # Code to be used in simple link tests
! 2689: lt_simple_link_test_code='int main(){return(0);}\n'
! 2690:
! 2691: _LT_AC_SYS_COMPILER
! 2692:
! 2693: # save warnings/boilerplate of simple test code
! 2694: _LT_COMPILER_BOILERPLATE
! 2695: _LT_LINKER_BOILERPLATE
! 2696:
! 2697: AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
! 2698: AC_LIBTOOL_PROG_COMPILER_PIC($1)
! 2699: AC_LIBTOOL_PROG_CC_C_O($1)
! 2700: AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
! 2701: AC_LIBTOOL_PROG_LD_SHLIBS($1)
! 2702: AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
! 2703: AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
! 2704: AC_LIBTOOL_SYS_LIB_STRIP
! 2705: AC_LIBTOOL_DLOPEN_SELF
! 2706:
! 2707: # Report which library types will actually be built
! 2708: AC_MSG_CHECKING([if libtool supports shared libraries])
! 2709: AC_MSG_RESULT([$can_build_shared])
! 2710:
! 2711: AC_MSG_CHECKING([whether to build shared libraries])
! 2712: test "$can_build_shared" = "no" && enable_shared=no
! 2713:
! 2714: # On AIX, shared libraries and static libraries use the same namespace, and
! 2715: # are all built from PIC.
! 2716: case $host_os in
! 2717: aix3*)
! 2718: test "$enable_shared" = yes && enable_static=no
! 2719: if test -n "$RANLIB"; then
! 2720: archive_cmds="$archive_cmds~\$RANLIB \$lib"
! 2721: postinstall_cmds='$RANLIB $lib'
! 2722: fi
! 2723: ;;
! 2724:
! 2725: aix4* | aix5*)
! 2726: if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
! 2727: test "$enable_shared" = yes && enable_static=no
! 2728: fi
! 2729: ;;
! 2730: esac
! 2731: AC_MSG_RESULT([$enable_shared])
! 2732:
! 2733: AC_MSG_CHECKING([whether to build static libraries])
! 2734: # Make sure either enable_shared or enable_static is yes.
! 2735: test "$enable_shared" = yes || enable_static=yes
! 2736: AC_MSG_RESULT([$enable_static])
! 2737:
! 2738: AC_LIBTOOL_CONFIG($1)
! 2739:
! 2740: AC_LANG_POP
! 2741: CC="$lt_save_CC"
! 2742: ])# AC_LIBTOOL_LANG_C_CONFIG
! 2743:
! 2744:
! 2745: # AC_LIBTOOL_LANG_CXX_CONFIG
! 2746: # --------------------------
! 2747: # Ensure that the configuration vars for the C compiler are
! 2748: # suitably defined. Those variables are subsequently used by
! 2749: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 2750: AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
! 2751: AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
! 2752: [AC_LANG_PUSH(C++)
! 2753: AC_REQUIRE([AC_PROG_CXX])
! 2754: AC_REQUIRE([_LT_AC_PROG_CXXCPP])
! 2755:
! 2756: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 2757: _LT_AC_TAGVAR(allow_undefined_flag, $1)=
! 2758: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 2759: _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
! 2760: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
! 2761: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 2762: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
! 2763: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
! 2764: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 2765: _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
! 2766: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
! 2767: _LT_AC_TAGVAR(hardcode_automatic, $1)=no
! 2768: _LT_AC_TAGVAR(module_cmds, $1)=
! 2769: _LT_AC_TAGVAR(module_expsym_cmds, $1)=
! 2770: _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
! 2771: _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
! 2772: _LT_AC_TAGVAR(no_undefined_flag, $1)=
! 2773: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 2774: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
! 2775:
! 2776: # Dependencies to place before and after the object being linked:
! 2777: _LT_AC_TAGVAR(predep_objects, $1)=
! 2778: _LT_AC_TAGVAR(postdep_objects, $1)=
! 2779: _LT_AC_TAGVAR(predeps, $1)=
! 2780: _LT_AC_TAGVAR(postdeps, $1)=
! 2781: _LT_AC_TAGVAR(compiler_lib_search_path, $1)=
! 2782:
! 2783: # Source file extension for C++ test sources.
! 2784: ac_ext=cpp
! 2785:
! 2786: # Object file extension for compiled C++ test sources.
! 2787: objext=o
! 2788: _LT_AC_TAGVAR(objext, $1)=$objext
! 2789:
! 2790: # Code to be used in simple compile tests
! 2791: lt_simple_compile_test_code="int some_variable = 0;\n"
! 2792:
! 2793: # Code to be used in simple link tests
! 2794: lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
! 2795:
! 2796: # ltmain only uses $CC for tagged configurations so make sure $CC is set.
! 2797: _LT_AC_SYS_COMPILER
! 2798:
! 2799: # save warnings/boilerplate of simple test code
! 2800: _LT_COMPILER_BOILERPLATE
! 2801: _LT_LINKER_BOILERPLATE
! 2802:
! 2803: # Allow CC to be a program name with arguments.
! 2804: lt_save_CC=$CC
! 2805: lt_save_LD=$LD
! 2806: lt_save_GCC=$GCC
! 2807: GCC=$GXX
! 2808: lt_save_with_gnu_ld=$with_gnu_ld
! 2809: lt_save_path_LD=$lt_cv_path_LD
! 2810: if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
! 2811: lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
! 2812: else
! 2813: $as_unset lt_cv_prog_gnu_ld
! 2814: fi
! 2815: if test -n "${lt_cv_path_LDCXX+set}"; then
! 2816: lt_cv_path_LD=$lt_cv_path_LDCXX
! 2817: else
! 2818: $as_unset lt_cv_path_LD
! 2819: fi
! 2820: test -z "${LDCXX+set}" || LD=$LDCXX
! 2821: CC=${CXX-"c++"}
! 2822: compiler=$CC
! 2823: _LT_AC_TAGVAR(compiler, $1)=$CC
! 2824: _LT_CC_BASENAME([$compiler])
! 2825:
! 2826: # We don't want -fno-exception wen compiling C++ code, so set the
! 2827: # no_builtin_flag separately
! 2828: if test "$GXX" = yes; then
! 2829: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
! 2830: else
! 2831: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
! 2832: fi
! 2833:
! 2834: if test "$GXX" = yes; then
! 2835: # Set up default GNU C++ configuration
! 2836:
! 2837: AC_PROG_LD
! 2838:
! 2839: # Check if GNU C++ uses GNU ld as the underlying linker, since the
! 2840: # archiving commands below assume that GNU ld is being used.
! 2841: if test "$with_gnu_ld" = yes; then
! 2842: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 2843: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 2844:
! 2845: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
! 2846: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 2847:
! 2848: # If archive_cmds runs LD, not CC, wlarc should be empty
! 2849: # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
! 2850: # investigate it a little bit more. (MM)
! 2851: wlarc='${wl}'
! 2852:
! 2853: # ancient GNU ld didn't support --whole-archive et. al.
! 2854: if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
! 2855: grep 'no-whole-archive' > /dev/null; then
! 2856: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
! 2857: else
! 2858: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 2859: fi
! 2860: else
! 2861: with_gnu_ld=no
! 2862: wlarc=
! 2863:
! 2864: # A generic and very simple default shared library creation
! 2865: # command for GNU C++ for the case where it uses the native
! 2866: # linker, instead of GNU ld. If possible, this setting should
! 2867: # overridden to take advantage of the native linker features on
! 2868: # the platform it is being used on.
! 2869: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
! 2870: fi
! 2871:
! 2872: # Commands to make compiler produce verbose output that lists
! 2873: # what "hidden" libraries, object files and flags are used when
! 2874: # linking a shared library.
! 2875: output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
! 2876:
! 2877: else
! 2878: GXX=no
! 2879: with_gnu_ld=no
! 2880: wlarc=
! 2881: fi
! 2882:
! 2883: # PORTME: fill in a description of your system's C++ link characteristics
! 2884: AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
! 2885: _LT_AC_TAGVAR(ld_shlibs, $1)=yes
! 2886: case $host_os in
! 2887: aix3*)
! 2888: # FIXME: insert proper C++ library support
! 2889: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 2890: ;;
! 2891: aix4* | aix5*)
! 2892: if test "$host_cpu" = ia64; then
! 2893: # On IA64, the linker does run time linking by default, so we don't
! 2894: # have to do anything special.
! 2895: aix_use_runtimelinking=no
! 2896: exp_sym_flag='-Bexport'
! 2897: no_entry_flag=""
! 2898: else
! 2899: aix_use_runtimelinking=no
! 2900:
! 2901: # Test if we are trying to use run time linking or normal
! 2902: # AIX style linking. If -brtl is somewhere in LDFLAGS, we
! 2903: # need to do runtime linking.
! 2904: case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
! 2905: for ld_flag in $LDFLAGS; do
! 2906: case $ld_flag in
! 2907: *-brtl*)
! 2908: aix_use_runtimelinking=yes
! 2909: break
! 2910: ;;
! 2911: esac
! 2912: done
! 2913: ;;
! 2914: esac
! 2915:
! 2916: exp_sym_flag='-bexport'
! 2917: no_entry_flag='-bnoentry'
! 2918: fi
! 2919:
! 2920: # When large executables or shared objects are built, AIX ld can
! 2921: # have problems creating the table of contents. If linking a library
! 2922: # or program results in "error TOC overflow" add -mminimal-toc to
! 2923: # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
! 2924: # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
! 2925:
! 2926: _LT_AC_TAGVAR(archive_cmds, $1)=''
! 2927: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 2928: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
! 2929: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 2930:
! 2931: if test "$GXX" = yes; then
! 2932: case $host_os in aix4.[[012]]|aix4.[[012]].*)
! 2933: # We only want to do this on AIX 4.2 and lower, the check
! 2934: # below for broken collect2 doesn't work under 4.3+
! 2935: collect2name=`${CC} -print-prog-name=collect2`
! 2936: if test -f "$collect2name" && \
! 2937: strings "$collect2name" | grep resolve_lib_name >/dev/null
! 2938: then
! 2939: # We have reworked collect2
! 2940: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 2941: else
! 2942: # We have old collect2
! 2943: _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
! 2944: # It fails to find uninstalled libraries when the uninstalled
! 2945: # path is not listed in the libpath. Setting hardcode_minus_L
! 2946: # to unsupported forces relinking
! 2947: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 2948: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 2949: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 2950: fi
! 2951: ;;
! 2952: esac
! 2953: shared_flag='-shared'
! 2954: if test "$aix_use_runtimelinking" = yes; then
! 2955: shared_flag="$shared_flag "'${wl}-G'
! 2956: fi
! 2957: else
! 2958: # not using gcc
! 2959: if test "$host_cpu" = ia64; then
! 2960: # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
! 2961: # chokes on -Wl,-G. The following line is correct:
! 2962: shared_flag='-G'
! 2963: else
! 2964: if test "$aix_use_runtimelinking" = yes; then
! 2965: shared_flag='${wl}-G'
! 2966: else
! 2967: shared_flag='${wl}-bM:SRE'
! 2968: fi
! 2969: fi
! 2970: fi
! 2971:
! 2972: # It seems that -bexpall does not export symbols beginning with
! 2973: # underscore (_), so it is better to generate a list of symbols to export.
! 2974: _LT_AC_TAGVAR(always_export_symbols, $1)=yes
! 2975: if test "$aix_use_runtimelinking" = yes; then
! 2976: # Warning - without using the other runtime loading flags (-brtl),
! 2977: # -berok will link without error, but may produce a broken library.
! 2978: _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
! 2979: # Determine the default libpath from the value encoded in an empty executable.
! 2980: _LT_AC_SYS_LIBPATH_AIX
! 2981: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
! 2982:
! 2983: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
! 2984: else
! 2985: if test "$host_cpu" = ia64; then
! 2986: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
! 2987: _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
! 2988: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
! 2989: else
! 2990: # Determine the default libpath from the value encoded in an empty executable.
! 2991: _LT_AC_SYS_LIBPATH_AIX
! 2992: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
! 2993: # Warning - without using the other run time loading flags,
! 2994: # -berok will link without error, but may produce a broken library.
! 2995: _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
! 2996: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
! 2997: # Exported symbols can be pulled into shared objects from archives
! 2998: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
! 2999: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
! 3000: # This is similar to how AIX traditionally builds its shared libraries.
! 3001: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
! 3002: fi
! 3003: fi
! 3004: ;;
! 3005:
! 3006: beos*)
! 3007: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 3008: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 3009: # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
! 3010: # support --undefined. This deserves some investigation. FIXME
! 3011: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 3012: else
! 3013: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3014: fi
! 3015: ;;
! 3016:
! 3017: chorus*)
! 3018: case $cc_basename in
! 3019: *)
! 3020: # FIXME: insert proper C++ library support
! 3021: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3022: ;;
! 3023: esac
! 3024: ;;
! 3025:
! 3026: cygwin* | mingw* | pw32*)
! 3027: # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
! 3028: # as there is no search path for DLLs.
! 3029: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 3030: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 3031: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 3032: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
! 3033:
! 3034: if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
! 3035: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
! 3036: # If the export-symbols file already is a .def file (1st line
! 3037: # is EXPORTS), use it as is; otherwise, prepend...
! 3038: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
! 3039: cp $export_symbols $output_objdir/$soname.def;
! 3040: else
! 3041: echo EXPORTS > $output_objdir/$soname.def;
! 3042: cat $export_symbols >> $output_objdir/$soname.def;
! 3043: fi~
! 3044: $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
! 3045: else
! 3046: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3047: fi
! 3048: ;;
! 3049: darwin* | rhapsody*)
! 3050: case $host_os in
! 3051: rhapsody* | darwin1.[[012]])
! 3052: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
! 3053: ;;
! 3054: *) # Darwin 1.3 on
! 3055: if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
! 3056: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
! 3057: else
! 3058: case ${MACOSX_DEPLOYMENT_TARGET} in
! 3059: 10.[[012]])
! 3060: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
! 3061: ;;
! 3062: 10.*)
! 3063: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
! 3064: ;;
! 3065: esac
! 3066: fi
! 3067: ;;
! 3068: esac
! 3069: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3070: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 3071: _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
! 3072: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
! 3073: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
! 3074: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 3075:
! 3076: if test "$GXX" = yes ; then
! 3077: lt_int_apple_cc_single_mod=no
! 3078: output_verbose_link_cmd='echo'
! 3079: if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
! 3080: lt_int_apple_cc_single_mod=yes
! 3081: fi
! 3082: if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
! 3083: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
! 3084: else
! 3085: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
! 3086: fi
! 3087: _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
! 3088: # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
! 3089: if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
! 3090: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3091: else
! 3092: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3093: fi
! 3094: _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3095: else
! 3096: case $cc_basename in
! 3097: xlc*)
! 3098: output_verbose_link_cmd='echo'
! 3099: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
! 3100: _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
! 3101: # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
! 3102: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3103: _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3104: ;;
! 3105: *)
! 3106: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3107: ;;
! 3108: esac
! 3109: fi
! 3110: ;;
! 3111:
! 3112: dgux*)
! 3113: case $cc_basename in
! 3114: ec++*)
! 3115: # FIXME: insert proper C++ library support
! 3116: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3117: ;;
! 3118: ghcx*)
! 3119: # Green Hills C++ Compiler
! 3120: # FIXME: insert proper C++ library support
! 3121: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3122: ;;
! 3123: *)
! 3124: # FIXME: insert proper C++ library support
! 3125: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3126: ;;
! 3127: esac
! 3128: ;;
! 3129: freebsd[[12]]*)
! 3130: # C++ shared libraries reported to be fairly broken before switch to ELF
! 3131: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3132: ;;
! 3133: freebsd-elf*)
! 3134: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3135: ;;
! 3136: freebsd* | kfreebsd*-gnu | dragonfly*)
! 3137: # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
! 3138: # conventions
! 3139: _LT_AC_TAGVAR(ld_shlibs, $1)=yes
! 3140: ;;
! 3141: gnu*)
! 3142: ;;
! 3143: hpux9*)
! 3144: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 3145: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3146: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 3147: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 3148: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
! 3149: # but as the default
! 3150: # location of the library.
! 3151:
! 3152: case $cc_basename in
! 3153: CC*)
! 3154: # FIXME: insert proper C++ library support
! 3155: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3156: ;;
! 3157: aCC*)
! 3158: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
! 3159: # Commands to make compiler produce verbose output that lists
! 3160: # what "hidden" libraries, object files and flags are used when
! 3161: # linking a shared library.
! 3162: #
! 3163: # There doesn't appear to be a way to prevent this compiler from
! 3164: # explicitly linking system object files so we need to strip them
! 3165: # from the output so that they don't get included in the library
! 3166: # dependencies.
! 3167: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3168: ;;
! 3169: *)
! 3170: if test "$GXX" = yes; then
! 3171: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
! 3172: else
! 3173: # FIXME: insert proper C++ library support
! 3174: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3175: fi
! 3176: ;;
! 3177: esac
! 3178: ;;
! 3179: hpux10*|hpux11*)
! 3180: if test $with_gnu_ld = no; then
! 3181: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 3182: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3183:
! 3184: case $host_cpu in
! 3185: hppa*64*|ia64*)
! 3186: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
! 3187: ;;
! 3188: *)
! 3189: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 3190: ;;
! 3191: esac
! 3192: fi
! 3193: case $host_cpu in
! 3194: hppa*64*|ia64*)
! 3195: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 3196: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3197: ;;
! 3198: *)
! 3199: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 3200: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
! 3201: # but as the default
! 3202: # location of the library.
! 3203: ;;
! 3204: esac
! 3205:
! 3206: case $cc_basename in
! 3207: CC*)
! 3208: # FIXME: insert proper C++ library support
! 3209: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3210: ;;
! 3211: aCC*)
! 3212: case $host_cpu in
! 3213: hppa*64*)
! 3214: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3215: ;;
! 3216: ia64*)
! 3217: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3218: ;;
! 3219: *)
! 3220: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3221: ;;
! 3222: esac
! 3223: # Commands to make compiler produce verbose output that lists
! 3224: # what "hidden" libraries, object files and flags are used when
! 3225: # linking a shared library.
! 3226: #
! 3227: # There doesn't appear to be a way to prevent this compiler from
! 3228: # explicitly linking system object files so we need to strip them
! 3229: # from the output so that they don't get included in the library
! 3230: # dependencies.
! 3231: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3232: ;;
! 3233: *)
! 3234: if test "$GXX" = yes; then
! 3235: if test $with_gnu_ld = no; then
! 3236: case $host_cpu in
! 3237: hppa*64*)
! 3238: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3239: ;;
! 3240: ia64*)
! 3241: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3242: ;;
! 3243: *)
! 3244: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3245: ;;
! 3246: esac
! 3247: fi
! 3248: else
! 3249: # FIXME: insert proper C++ library support
! 3250: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3251: fi
! 3252: ;;
! 3253: esac
! 3254: ;;
! 3255: interix3*)
! 3256: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 3257: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3258: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3259: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 3260: # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
! 3261: # Instead, shared libraries are loaded at an image base (0x10000000 by
! 3262: # default) and relocated if they conflict, which is a slow very memory
! 3263: # consuming and fragmenting process. To avoid this, we pick a random,
! 3264: # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
! 3265: # time. Moving up from 0x10000000 also allows more sbrk(2) space.
! 3266: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
! 3267: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
! 3268: ;;
! 3269: irix5* | irix6*)
! 3270: case $cc_basename in
! 3271: CC*)
! 3272: # SGI C++
! 3273: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 3274:
! 3275: # Archives containing C++ object files must be created using
! 3276: # "CC -ar", where "CC" is the IRIX C++ compiler. This is
! 3277: # necessary to make sure instantiated templates are included
! 3278: # in the archive.
! 3279: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
! 3280: ;;
! 3281: *)
! 3282: if test "$GXX" = yes; then
! 3283: if test "$with_gnu_ld" = no; then
! 3284: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 3285: else
! 3286: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
! 3287: fi
! 3288: fi
! 3289: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 3290: ;;
! 3291: esac
! 3292: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 3293: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3294: ;;
! 3295: linux*)
! 3296: case $cc_basename in
! 3297: KCC*)
! 3298: # Kuck and Associates, Inc. (KAI) C++ Compiler
! 3299:
! 3300: # KCC will only create a shared library if the output file
! 3301: # ends with ".so" (or ".sl" for HP-UX), so rename the library
! 3302: # to its proper name (with version) after linking.
! 3303: _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
! 3304: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
! 3305: # Commands to make compiler produce verbose output that lists
! 3306: # what "hidden" libraries, object files and flags are used when
! 3307: # linking a shared library.
! 3308: #
! 3309: # There doesn't appear to be a way to prevent this compiler from
! 3310: # explicitly linking system object files so we need to strip them
! 3311: # from the output so that they don't get included in the library
! 3312: # dependencies.
! 3313: output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3314:
! 3315: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
! 3316: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 3317:
! 3318: # Archives containing C++ object files must be created using
! 3319: # "CC -Bstatic", where "CC" is the KAI C++ compiler.
! 3320: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
! 3321: ;;
! 3322: icpc*)
! 3323: # Intel C++
! 3324: with_gnu_ld=yes
! 3325: # version 8.0 and above of icpc choke on multiply defined symbols
! 3326: # if we add $predep_objects and $postdep_objects, however 7.1 and
! 3327: # earlier do not add the objects themselves.
! 3328: case `$CC -V 2>&1` in
! 3329: *"Version 7."*)
! 3330: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 3331: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 3332: ;;
! 3333: *) # Version 8.0 or newer
! 3334: tmp_idyn=
! 3335: case $host_cpu in
! 3336: ia64*) tmp_idyn=' -i_dynamic';;
! 3337: esac
! 3338: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 3339: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 3340: ;;
! 3341: esac
! 3342: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3343: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3344: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 3345: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
! 3346: ;;
! 3347: pgCC*)
! 3348: # Portland Group C++ compiler
! 3349: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
! 3350: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
! 3351:
! 3352: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
! 3353: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 3354: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
! 3355: ;;
! 3356: cxx*)
! 3357: # Compaq C++
! 3358: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 3359: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
! 3360:
! 3361: runpath_var=LD_RUN_PATH
! 3362: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
! 3363: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3364:
! 3365: # Commands to make compiler produce verbose output that lists
! 3366: # what "hidden" libraries, object files and flags are used when
! 3367: # linking a shared library.
! 3368: #
! 3369: # There doesn't appear to be a way to prevent this compiler from
! 3370: # explicitly linking system object files so we need to strip them
! 3371: # from the output so that they don't get included in the library
! 3372: # dependencies.
! 3373: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3374: ;;
! 3375: esac
! 3376: ;;
! 3377: lynxos*)
! 3378: # FIXME: insert proper C++ library support
! 3379: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3380: ;;
! 3381: m88k*)
! 3382: # FIXME: insert proper C++ library support
! 3383: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3384: ;;
! 3385: mvs*)
! 3386: case $cc_basename in
! 3387: cxx*)
! 3388: # FIXME: insert proper C++ library support
! 3389: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3390: ;;
! 3391: *)
! 3392: # FIXME: insert proper C++ library support
! 3393: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3394: ;;
! 3395: esac
! 3396: ;;
! 3397: netbsd*)
! 3398: if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
! 3399: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
! 3400: wlarc=
! 3401: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 3402: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 3403: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3404: fi
! 3405: # Workaround some broken pre-1.5 toolchains
! 3406: output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
! 3407: ;;
! 3408: openbsd2*)
! 3409: # C++ shared libraries are fairly broken
! 3410: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3411: ;;
! 3412: openbsd*)
! 3413: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 3414: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3415: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
! 3416: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3417: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
! 3418: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
! 3419: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 3420: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
! 3421: fi
! 3422: output_verbose_link_cmd='echo'
! 3423: ;;
! 3424: osf3*)
! 3425: case $cc_basename in
! 3426: KCC*)
! 3427: # Kuck and Associates, Inc. (KAI) C++ Compiler
! 3428:
! 3429: # KCC will only create a shared library if the output file
! 3430: # ends with ".so" (or ".sl" for HP-UX), so rename the library
! 3431: # to its proper name (with version) after linking.
! 3432: _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
! 3433:
! 3434: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3435: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3436:
! 3437: # Archives containing C++ object files must be created using
! 3438: # "CC -Bstatic", where "CC" is the KAI C++ compiler.
! 3439: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
! 3440:
! 3441: ;;
! 3442: RCC*)
! 3443: # Rational C++ 2.4.1
! 3444: # FIXME: insert proper C++ library support
! 3445: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3446: ;;
! 3447: cxx*)
! 3448: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 3449: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 3450:
! 3451: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 3452: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3453:
! 3454: # Commands to make compiler produce verbose output that lists
! 3455: # what "hidden" libraries, object files and flags are used when
! 3456: # linking a shared library.
! 3457: #
! 3458: # There doesn't appear to be a way to prevent this compiler from
! 3459: # explicitly linking system object files so we need to strip them
! 3460: # from the output so that they don't get included in the library
! 3461: # dependencies.
! 3462: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3463: ;;
! 3464: *)
! 3465: if test "$GXX" = yes && test "$with_gnu_ld" = no; then
! 3466: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 3467: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 3468:
! 3469: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 3470: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3471:
! 3472: # Commands to make compiler produce verbose output that lists
! 3473: # what "hidden" libraries, object files and flags are used when
! 3474: # linking a shared library.
! 3475: output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
! 3476:
! 3477: else
! 3478: # FIXME: insert proper C++ library support
! 3479: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3480: fi
! 3481: ;;
! 3482: esac
! 3483: ;;
! 3484: osf4* | osf5*)
! 3485: case $cc_basename in
! 3486: KCC*)
! 3487: # Kuck and Associates, Inc. (KAI) C++ Compiler
! 3488:
! 3489: # KCC will only create a shared library if the output file
! 3490: # ends with ".so" (or ".sl" for HP-UX), so rename the library
! 3491: # to its proper name (with version) after linking.
! 3492: _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
! 3493:
! 3494: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3495: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3496:
! 3497: # Archives containing C++ object files must be created using
! 3498: # the KAI C++ compiler.
! 3499: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
! 3500: ;;
! 3501: RCC*)
! 3502: # Rational C++ 2.4.1
! 3503: # FIXME: insert proper C++ library support
! 3504: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3505: ;;
! 3506: cxx*)
! 3507: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
! 3508: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 3509: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
! 3510: echo "-hidden">> $lib.exp~
! 3511: $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
! 3512: $rm $lib.exp'
! 3513:
! 3514: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
! 3515: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3516:
! 3517: # Commands to make compiler produce verbose output that lists
! 3518: # what "hidden" libraries, object files and flags are used when
! 3519: # linking a shared library.
! 3520: #
! 3521: # There doesn't appear to be a way to prevent this compiler from
! 3522: # explicitly linking system object files so we need to strip them
! 3523: # from the output so that they don't get included in the library
! 3524: # dependencies.
! 3525: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3526: ;;
! 3527: *)
! 3528: if test "$GXX" = yes && test "$with_gnu_ld" = no; then
! 3529: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 3530: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 3531:
! 3532: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 3533: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3534:
! 3535: # Commands to make compiler produce verbose output that lists
! 3536: # what "hidden" libraries, object files and flags are used when
! 3537: # linking a shared library.
! 3538: output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
! 3539:
! 3540: else
! 3541: # FIXME: insert proper C++ library support
! 3542: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3543: fi
! 3544: ;;
! 3545: esac
! 3546: ;;
! 3547: psos*)
! 3548: # FIXME: insert proper C++ library support
! 3549: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3550: ;;
! 3551: sunos4*)
! 3552: case $cc_basename in
! 3553: CC*)
! 3554: # Sun C++ 4.x
! 3555: # FIXME: insert proper C++ library support
! 3556: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3557: ;;
! 3558: lcc*)
! 3559: # Lucid
! 3560: # FIXME: insert proper C++ library support
! 3561: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3562: ;;
! 3563: *)
! 3564: # FIXME: insert proper C++ library support
! 3565: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3566: ;;
! 3567: esac
! 3568: ;;
! 3569: solaris*)
! 3570: case $cc_basename in
! 3571: CC*)
! 3572: # Sun C++ 4.2, 5.x and Centerline C++
! 3573: _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
! 3574: _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
! 3575: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3576: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 3577: $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
! 3578:
! 3579: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 3580: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3581: case $host_os in
! 3582: solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
! 3583: *)
! 3584: # The C++ compiler is used as linker so we must use $wl
! 3585: # flag to pass the commands to the underlying system
! 3586: # linker. We must also pass each convience library through
! 3587: # to the system linker between allextract/defaultextract.
! 3588: # The C++ compiler will combine linker options so we
! 3589: # cannot just pass the convience library names through
! 3590: # without $wl.
! 3591: # Supported since Solaris 2.6 (maybe 2.5.1?)
! 3592: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
! 3593: ;;
! 3594: esac
! 3595: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 3596:
! 3597: output_verbose_link_cmd='echo'
! 3598:
! 3599: # Archives containing C++ object files must be created using
! 3600: # "CC -xar", where "CC" is the Sun C++ compiler. This is
! 3601: # necessary to make sure instantiated templates are included
! 3602: # in the archive.
! 3603: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
! 3604: ;;
! 3605: gcx*)
! 3606: # Green Hills C++ Compiler
! 3607: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
! 3608:
! 3609: # The C++ compiler must be used to create the archive.
! 3610: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
! 3611: ;;
! 3612: *)
! 3613: # GNU C++ compiler with Solaris linker
! 3614: if test "$GXX" = yes && test "$with_gnu_ld" = no; then
! 3615: _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
! 3616: if $CC --version | grep -v '^2\.7' > /dev/null; then
! 3617: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
! 3618: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 3619: $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
! 3620:
! 3621: # Commands to make compiler produce verbose output that lists
! 3622: # what "hidden" libraries, object files and flags are used when
! 3623: # linking a shared library.
! 3624: output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
! 3625: else
! 3626: # g++ 2.7 appears to require `-G' NOT `-shared' on this
! 3627: # platform.
! 3628: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
! 3629: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 3630: $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
! 3631:
! 3632: # Commands to make compiler produce verbose output that lists
! 3633: # what "hidden" libraries, object files and flags are used when
! 3634: # linking a shared library.
! 3635: output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
! 3636: fi
! 3637:
! 3638: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
! 3639: fi
! 3640: ;;
! 3641: esac
! 3642: ;;
! 3643: sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
! 3644: _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
! 3645: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3646: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3647: runpath_var='LD_RUN_PATH'
! 3648:
! 3649: case $cc_basename in
! 3650: CC*)
! 3651: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3652: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3653: ;;
! 3654: *)
! 3655: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3656: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3657: ;;
! 3658: esac
! 3659: ;;
! 3660: sysv5* | sco3.2v5* | sco5v6*)
! 3661: # Note: We can NOT use -z defs as we might desire, because we do not
! 3662: # link with -lc, and that would cause any symbols used from libc to
! 3663: # always be unresolved, which means just about no library would
! 3664: # ever link correctly. If we're not using GNU ld we use -z text
! 3665: # though, which does catch some bad symbols but isn't as heavy-handed
! 3666: # as -z defs.
! 3667: # For security reasons, it is highly recommended that you always
! 3668: # use absolute paths for naming shared libraries, and exclude the
! 3669: # DT_RUNPATH tag from executables and libraries. But doing so
! 3670: # requires that you compile everything twice, which is a pain.
! 3671: # So that behaviour is only enabled if SCOABSPATH is set to a
! 3672: # non-empty value in the environment. Most likely only useful for
! 3673: # creating official distributions of packages.
! 3674: # This is a hack until libtool officially supports absolute path
! 3675: # names for shared libraries.
! 3676: _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
! 3677: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
! 3678: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3679: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3680: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
! 3681: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
! 3682: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 3683: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
! 3684: runpath_var='LD_RUN_PATH'
! 3685:
! 3686: case $cc_basename in
! 3687: CC*)
! 3688: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3689: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3690: ;;
! 3691: *)
! 3692: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3693: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3694: ;;
! 3695: esac
! 3696: ;;
! 3697: tandem*)
! 3698: case $cc_basename in
! 3699: NCC*)
! 3700: # NonStop-UX NCC 3.20
! 3701: # FIXME: insert proper C++ library support
! 3702: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3703: ;;
! 3704: *)
! 3705: # FIXME: insert proper C++ library support
! 3706: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3707: ;;
! 3708: esac
! 3709: ;;
! 3710: vxworks*)
! 3711: # FIXME: insert proper C++ library support
! 3712: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3713: ;;
! 3714: *)
! 3715: # FIXME: insert proper C++ library support
! 3716: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3717: ;;
! 3718: esac
! 3719: AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
! 3720: test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
! 3721:
! 3722: _LT_AC_TAGVAR(GCC, $1)="$GXX"
! 3723: _LT_AC_TAGVAR(LD, $1)="$LD"
! 3724:
! 3725: AC_LIBTOOL_POSTDEP_PREDEP($1)
! 3726: AC_LIBTOOL_PROG_COMPILER_PIC($1)
! 3727: AC_LIBTOOL_PROG_CC_C_O($1)
! 3728: AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
! 3729: AC_LIBTOOL_PROG_LD_SHLIBS($1)
! 3730: AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
! 3731: AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
! 3732:
! 3733: AC_LIBTOOL_CONFIG($1)
! 3734:
! 3735: AC_LANG_POP
! 3736: CC=$lt_save_CC
! 3737: LDCXX=$LD
! 3738: LD=$lt_save_LD
! 3739: GCC=$lt_save_GCC
! 3740: with_gnu_ldcxx=$with_gnu_ld
! 3741: with_gnu_ld=$lt_save_with_gnu_ld
! 3742: lt_cv_path_LDCXX=$lt_cv_path_LD
! 3743: lt_cv_path_LD=$lt_save_path_LD
! 3744: lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
! 3745: lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
! 3746: ])# AC_LIBTOOL_LANG_CXX_CONFIG
! 3747:
! 3748: # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
! 3749: # ------------------------------------
! 3750: # Figure out "hidden" library dependencies from verbose
! 3751: # compiler output when linking a shared library.
! 3752: # Parse the compiler output and extract the necessary
! 3753: # objects, libraries and library flags.
! 3754: AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
! 3755: dnl we can't use the lt_simple_compile_test_code here,
! 3756: dnl because it contains code intended for an executable,
! 3757: dnl not a library. It's possible we should let each
! 3758: dnl tag define a new lt_????_link_test_code variable,
! 3759: dnl but it's only used here...
! 3760: ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
! 3761: int a;
! 3762: void foo (void) { a = 0; }
! 3763: EOF
! 3764: ],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
! 3765: class Foo
! 3766: {
! 3767: public:
! 3768: Foo (void) { a = 0; }
! 3769: private:
! 3770: int a;
! 3771: };
! 3772: EOF
! 3773: ],[$1],[F77],[cat > conftest.$ac_ext <<EOF
! 3774: subroutine foo
! 3775: implicit none
! 3776: integer*4 a
! 3777: a=0
! 3778: return
! 3779: end
! 3780: EOF
! 3781: ],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
! 3782: public class foo {
! 3783: private int a;
! 3784: public void bar (void) {
! 3785: a = 0;
! 3786: }
! 3787: };
! 3788: EOF
! 3789: ])
! 3790: dnl Parse the compiler output and extract the necessary
! 3791: dnl objects, libraries and library flags.
! 3792: if AC_TRY_EVAL(ac_compile); then
! 3793: # Parse the compiler output and extract the necessary
! 3794: # objects, libraries and library flags.
! 3795:
! 3796: # Sentinel used to keep track of whether or not we are before
! 3797: # the conftest object file.
! 3798: pre_test_object_deps_done=no
! 3799:
! 3800: # The `*' in the case matches for architectures that use `case' in
! 3801: # $output_verbose_cmd can trigger glob expansion during the loop
! 3802: # eval without this substitution.
! 3803: output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
! 3804:
! 3805: for p in `eval $output_verbose_link_cmd`; do
! 3806: case $p in
! 3807:
! 3808: -L* | -R* | -l*)
! 3809: # Some compilers place space between "-{L,R}" and the path.
! 3810: # Remove the space.
! 3811: if test $p = "-L" \
! 3812: || test $p = "-R"; then
! 3813: prev=$p
! 3814: continue
! 3815: else
! 3816: prev=
! 3817: fi
! 3818:
! 3819: if test "$pre_test_object_deps_done" = no; then
! 3820: case $p in
! 3821: -L* | -R*)
! 3822: # Internal compiler library paths should come after those
! 3823: # provided the user. The postdeps already come after the
! 3824: # user supplied libs so there is no need to process them.
! 3825: if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
! 3826: _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
! 3827: else
! 3828: _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
! 3829: fi
! 3830: ;;
! 3831: # The "-l" case would never come before the object being
! 3832: # linked, so don't bother handling this case.
! 3833: esac
! 3834: else
! 3835: if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
! 3836: _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
! 3837: else
! 3838: _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
! 3839: fi
! 3840: fi
! 3841: ;;
! 3842:
! 3843: *.$objext)
! 3844: # This assumes that the test object file only shows up
! 3845: # once in the compiler output.
! 3846: if test "$p" = "conftest.$objext"; then
! 3847: pre_test_object_deps_done=yes
! 3848: continue
! 3849: fi
! 3850:
! 3851: if test "$pre_test_object_deps_done" = no; then
! 3852: if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
! 3853: _LT_AC_TAGVAR(predep_objects, $1)="$p"
! 3854: else
! 3855: _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
! 3856: fi
! 3857: else
! 3858: if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
! 3859: _LT_AC_TAGVAR(postdep_objects, $1)="$p"
! 3860: else
! 3861: _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
! 3862: fi
! 3863: fi
! 3864: ;;
! 3865:
! 3866: *) ;; # Ignore the rest.
! 3867:
! 3868: esac
! 3869: done
! 3870:
! 3871: # Clean up.
! 3872: rm -f a.out a.exe
! 3873: else
! 3874: echo "libtool.m4: error: problem compiling $1 test program"
! 3875: fi
! 3876:
! 3877: $rm -f confest.$objext
! 3878:
! 3879: # PORTME: override above test on systems where it is broken
! 3880: ifelse([$1],[CXX],
! 3881: [case $host_os in
! 3882: interix3*)
! 3883: # Interix 3.5 installs completely hosed .la files for C++, so rather than
! 3884: # hack all around it, let's just trust "g++" to DTRT.
! 3885: _LT_AC_TAGVAR(predep_objects,$1)=
! 3886: _LT_AC_TAGVAR(postdep_objects,$1)=
! 3887: _LT_AC_TAGVAR(postdeps,$1)=
! 3888: ;;
! 3889:
! 3890: solaris*)
! 3891: case $cc_basename in
! 3892: CC*)
! 3893: # Adding this requires a known-good setup of shared libraries for
! 3894: # Sun compiler versions before 5.6, else PIC objects from an old
! 3895: # archive will be linked into the output, leading to subtle bugs.
! 3896: _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
! 3897: ;;
! 3898: esac
! 3899: ;;
! 3900: esac
! 3901: ])
! 3902:
! 3903: case " $_LT_AC_TAGVAR(postdeps, $1) " in
! 3904: *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
! 3905: esac
! 3906: ])# AC_LIBTOOL_POSTDEP_PREDEP
! 3907:
! 3908: # AC_LIBTOOL_LANG_F77_CONFIG
! 3909: # --------------------------
! 3910: # Ensure that the configuration vars for the C compiler are
! 3911: # suitably defined. Those variables are subsequently used by
! 3912: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 3913: AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
! 3914: AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
! 3915: [AC_REQUIRE([AC_PROG_F77])
! 3916: AC_LANG_PUSH(Fortran 77)
! 3917:
! 3918: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3919: _LT_AC_TAGVAR(allow_undefined_flag, $1)=
! 3920: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 3921: _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
! 3922: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
! 3923: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 3924: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
! 3925: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
! 3926: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 3927: _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
! 3928: _LT_AC_TAGVAR(hardcode_automatic, $1)=no
! 3929: _LT_AC_TAGVAR(module_cmds, $1)=
! 3930: _LT_AC_TAGVAR(module_expsym_cmds, $1)=
! 3931: _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
! 3932: _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
! 3933: _LT_AC_TAGVAR(no_undefined_flag, $1)=
! 3934: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 3935: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
! 3936:
! 3937: # Source file extension for f77 test sources.
! 3938: ac_ext=f
! 3939:
! 3940: # Object file extension for compiled f77 test sources.
! 3941: objext=o
! 3942: _LT_AC_TAGVAR(objext, $1)=$objext
! 3943:
! 3944: # Code to be used in simple compile tests
! 3945: lt_simple_compile_test_code=" subroutine t\n return\n end\n"
! 3946:
! 3947: # Code to be used in simple link tests
! 3948: lt_simple_link_test_code=" program t\n end\n"
! 3949:
! 3950: # ltmain only uses $CC for tagged configurations so make sure $CC is set.
! 3951: _LT_AC_SYS_COMPILER
! 3952:
! 3953: # save warnings/boilerplate of simple test code
! 3954: _LT_COMPILER_BOILERPLATE
! 3955: _LT_LINKER_BOILERPLATE
! 3956:
! 3957: # Allow CC to be a program name with arguments.
! 3958: lt_save_CC="$CC"
! 3959: CC=${F77-"f77"}
! 3960: compiler=$CC
! 3961: _LT_AC_TAGVAR(compiler, $1)=$CC
! 3962: _LT_CC_BASENAME([$compiler])
! 3963:
! 3964: AC_MSG_CHECKING([if libtool supports shared libraries])
! 3965: AC_MSG_RESULT([$can_build_shared])
! 3966:
! 3967: AC_MSG_CHECKING([whether to build shared libraries])
! 3968: test "$can_build_shared" = "no" && enable_shared=no
! 3969:
! 3970: # On AIX, shared libraries and static libraries use the same namespace, and
! 3971: # are all built from PIC.
! 3972: case $host_os in
! 3973: aix3*)
! 3974: test "$enable_shared" = yes && enable_static=no
! 3975: if test -n "$RANLIB"; then
! 3976: archive_cmds="$archive_cmds~\$RANLIB \$lib"
! 3977: postinstall_cmds='$RANLIB $lib'
! 3978: fi
! 3979: ;;
! 3980: aix4* | aix5*)
! 3981: if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
! 3982: test "$enable_shared" = yes && enable_static=no
! 3983: fi
! 3984: ;;
! 3985: esac
! 3986: AC_MSG_RESULT([$enable_shared])
! 3987:
! 3988: AC_MSG_CHECKING([whether to build static libraries])
! 3989: # Make sure either enable_shared or enable_static is yes.
! 3990: test "$enable_shared" = yes || enable_static=yes
! 3991: AC_MSG_RESULT([$enable_static])
! 3992:
! 3993: _LT_AC_TAGVAR(GCC, $1)="$G77"
! 3994: _LT_AC_TAGVAR(LD, $1)="$LD"
! 3995:
! 3996: AC_LIBTOOL_PROG_COMPILER_PIC($1)
! 3997: AC_LIBTOOL_PROG_CC_C_O($1)
! 3998: AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
! 3999: AC_LIBTOOL_PROG_LD_SHLIBS($1)
! 4000: AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
! 4001: AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
! 4002:
! 4003: AC_LIBTOOL_CONFIG($1)
! 4004:
! 4005: AC_LANG_POP
! 4006: CC="$lt_save_CC"
! 4007: ])# AC_LIBTOOL_LANG_F77_CONFIG
! 4008:
! 4009:
! 4010: # AC_LIBTOOL_LANG_GCJ_CONFIG
! 4011: # --------------------------
! 4012: # Ensure that the configuration vars for the C compiler are
! 4013: # suitably defined. Those variables are subsequently used by
! 4014: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 4015: AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
! 4016: AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
! 4017: [AC_LANG_SAVE
! 4018:
! 4019: # Source file extension for Java test sources.
! 4020: ac_ext=java
! 4021:
! 4022: # Object file extension for compiled Java test sources.
! 4023: objext=o
! 4024: _LT_AC_TAGVAR(objext, $1)=$objext
! 4025:
! 4026: # Code to be used in simple compile tests
! 4027: lt_simple_compile_test_code="class foo {}\n"
! 4028:
! 4029: # Code to be used in simple link tests
! 4030: lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
! 4031:
! 4032: # ltmain only uses $CC for tagged configurations so make sure $CC is set.
! 4033: _LT_AC_SYS_COMPILER
! 4034:
! 4035: # save warnings/boilerplate of simple test code
! 4036: _LT_COMPILER_BOILERPLATE
! 4037: _LT_LINKER_BOILERPLATE
! 4038:
! 4039: # Allow CC to be a program name with arguments.
! 4040: lt_save_CC="$CC"
! 4041: CC=${GCJ-"gcj"}
! 4042: compiler=$CC
! 4043: _LT_AC_TAGVAR(compiler, $1)=$CC
! 4044: _LT_CC_BASENAME([$compiler])
! 4045:
! 4046: # GCJ did not exist at the time GCC didn't implicitly link libc in.
! 4047: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 4048:
! 4049: _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
! 4050:
! 4051: AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
! 4052: AC_LIBTOOL_PROG_COMPILER_PIC($1)
! 4053: AC_LIBTOOL_PROG_CC_C_O($1)
! 4054: AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
! 4055: AC_LIBTOOL_PROG_LD_SHLIBS($1)
! 4056: AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
! 4057: AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
! 4058:
! 4059: AC_LIBTOOL_CONFIG($1)
! 4060:
! 4061: AC_LANG_RESTORE
! 4062: CC="$lt_save_CC"
! 4063: ])# AC_LIBTOOL_LANG_GCJ_CONFIG
! 4064:
! 4065:
! 4066: # AC_LIBTOOL_LANG_RC_CONFIG
! 4067: # -------------------------
! 4068: # Ensure that the configuration vars for the Windows resource compiler are
! 4069: # suitably defined. Those variables are subsequently used by
! 4070: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 4071: AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
! 4072: AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
! 4073: [AC_LANG_SAVE
! 4074:
! 4075: # Source file extension for RC test sources.
! 4076: ac_ext=rc
! 4077:
! 4078: # Object file extension for compiled RC test sources.
! 4079: objext=o
! 4080: _LT_AC_TAGVAR(objext, $1)=$objext
! 4081:
! 4082: # Code to be used in simple compile tests
! 4083: lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
! 4084:
! 4085: # Code to be used in simple link tests
! 4086: lt_simple_link_test_code="$lt_simple_compile_test_code"
! 4087:
! 4088: # ltmain only uses $CC for tagged configurations so make sure $CC is set.
! 4089: _LT_AC_SYS_COMPILER
! 4090:
! 4091: # save warnings/boilerplate of simple test code
! 4092: _LT_COMPILER_BOILERPLATE
! 4093: _LT_LINKER_BOILERPLATE
! 4094:
! 4095: # Allow CC to be a program name with arguments.
! 4096: lt_save_CC="$CC"
! 4097: CC=${RC-"windres"}
! 4098: compiler=$CC
! 4099: _LT_AC_TAGVAR(compiler, $1)=$CC
! 4100: _LT_CC_BASENAME([$compiler])
! 4101: _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
! 4102:
! 4103: AC_LIBTOOL_CONFIG($1)
! 4104:
! 4105: AC_LANG_RESTORE
! 4106: CC="$lt_save_CC"
! 4107: ])# AC_LIBTOOL_LANG_RC_CONFIG
! 4108:
! 4109:
! 4110: # AC_LIBTOOL_CONFIG([TAGNAME])
! 4111: # ----------------------------
! 4112: # If TAGNAME is not passed, then create an initial libtool script
! 4113: # with a default configuration from the untagged config vars. Otherwise
! 4114: # add code to config.status for appending the configuration named by
! 4115: # TAGNAME from the matching tagged config vars.
! 4116: AC_DEFUN([AC_LIBTOOL_CONFIG],
! 4117: [# The else clause should only fire when bootstrapping the
! 4118: # libtool distribution, otherwise you forgot to ship ltmain.sh
! 4119: # with your package, and you will get complaints that there are
! 4120: # no rules to generate ltmain.sh.
! 4121: if test -f "$ltmain"; then
! 4122: # See if we are running on zsh, and set the options which allow our commands through
! 4123: # without removal of \ escapes.
! 4124: if test -n "${ZSH_VERSION+set}" ; then
! 4125: setopt NO_GLOB_SUBST
! 4126: fi
! 4127: # Now quote all the things that may contain metacharacters while being
! 4128: # careful not to overquote the AC_SUBSTed values. We take copies of the
! 4129: # variables and quote the copies for generation of the libtool script.
! 4130: for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
! 4131: SED SHELL STRIP \
! 4132: libname_spec library_names_spec soname_spec extract_expsyms_cmds \
! 4133: old_striplib striplib file_magic_cmd finish_cmds finish_eval \
! 4134: deplibs_check_method reload_flag reload_cmds need_locks \
! 4135: lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
! 4136: lt_cv_sys_global_symbol_to_c_name_address \
! 4137: sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
! 4138: old_postinstall_cmds old_postuninstall_cmds \
! 4139: _LT_AC_TAGVAR(compiler, $1) \
! 4140: _LT_AC_TAGVAR(CC, $1) \
! 4141: _LT_AC_TAGVAR(LD, $1) \
! 4142: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
! 4143: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
! 4144: _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
! 4145: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
! 4146: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
! 4147: _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
! 4148: _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
! 4149: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
! 4150: _LT_AC_TAGVAR(old_archive_cmds, $1) \
! 4151: _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
! 4152: _LT_AC_TAGVAR(predep_objects, $1) \
! 4153: _LT_AC_TAGVAR(postdep_objects, $1) \
! 4154: _LT_AC_TAGVAR(predeps, $1) \
! 4155: _LT_AC_TAGVAR(postdeps, $1) \
! 4156: _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
! 4157: _LT_AC_TAGVAR(archive_cmds, $1) \
! 4158: _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
! 4159: _LT_AC_TAGVAR(postinstall_cmds, $1) \
! 4160: _LT_AC_TAGVAR(postuninstall_cmds, $1) \
! 4161: _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
! 4162: _LT_AC_TAGVAR(allow_undefined_flag, $1) \
! 4163: _LT_AC_TAGVAR(no_undefined_flag, $1) \
! 4164: _LT_AC_TAGVAR(export_symbols_cmds, $1) \
! 4165: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
! 4166: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
! 4167: _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
! 4168: _LT_AC_TAGVAR(hardcode_automatic, $1) \
! 4169: _LT_AC_TAGVAR(module_cmds, $1) \
! 4170: _LT_AC_TAGVAR(module_expsym_cmds, $1) \
! 4171: _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
! 4172: _LT_AC_TAGVAR(exclude_expsyms, $1) \
! 4173: _LT_AC_TAGVAR(include_expsyms, $1); do
! 4174:
! 4175: case $var in
! 4176: _LT_AC_TAGVAR(old_archive_cmds, $1) | \
! 4177: _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
! 4178: _LT_AC_TAGVAR(archive_cmds, $1) | \
! 4179: _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
! 4180: _LT_AC_TAGVAR(module_cmds, $1) | \
! 4181: _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
! 4182: _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
! 4183: _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
! 4184: extract_expsyms_cmds | reload_cmds | finish_cmds | \
! 4185: postinstall_cmds | postuninstall_cmds | \
! 4186: old_postinstall_cmds | old_postuninstall_cmds | \
! 4187: sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
! 4188: # Double-quote double-evaled strings.
! 4189: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
! 4190: ;;
! 4191: *)
! 4192: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
! 4193: ;;
! 4194: esac
! 4195: done
! 4196:
! 4197: case $lt_echo in
! 4198: *'\[$]0 --fallback-echo"')
! 4199: lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
! 4200: ;;
! 4201: esac
! 4202:
! 4203: ifelse([$1], [],
! 4204: [cfgfile="${ofile}T"
! 4205: trap "$rm \"$cfgfile\"; exit 1" 1 2 15
! 4206: $rm -f "$cfgfile"
! 4207: AC_MSG_NOTICE([creating $ofile])],
! 4208: [cfgfile="$ofile"])
! 4209:
! 4210: cat <<__EOF__ >> "$cfgfile"
! 4211: ifelse([$1], [],
! 4212: [#! $SHELL
! 4213:
! 4214: # `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
! 4215: # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
! 4216: # NOTE: Changes made to this file will be lost: look at ltmain.sh.
! 4217: #
! 4218: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
! 4219: # Free Software Foundation, Inc.
! 4220: #
! 4221: # This file is part of GNU Libtool:
! 4222: # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
! 4223: #
! 4224: # This program is free software; you can redistribute it and/or modify
! 4225: # it under the terms of the GNU General Public License as published by
! 4226: # the Free Software Foundation; either version 2 of the License, or
! 4227: # (at your option) any later version.
! 4228: #
! 4229: # This program is distributed in the hope that it will be useful, but
! 4230: # WITHOUT ANY WARRANTY; without even the implied warranty of
! 4231: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! 4232: # General Public License for more details.
! 4233: #
! 4234: # You should have received a copy of the GNU General Public License
! 4235: # along with this program; if not, write to the Free Software
! 4236: # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
! 4237: #
! 4238: # As a special exception to the GNU General Public License, if you
! 4239: # distribute this file as part of a program that contains a
! 4240: # configuration script generated by Autoconf, you may include it under
! 4241: # the same distribution terms that you use for the rest of that program.
! 4242:
! 4243: # A sed program that does not truncate output.
! 4244: SED=$lt_SED
! 4245:
! 4246: # Sed that helps us avoid accidentally triggering echo(1) options like -n.
! 4247: Xsed="$SED -e 1s/^X//"
! 4248:
! 4249: # The HP-UX ksh and POSIX shell print the target directory to stdout
! 4250: # if CDPATH is set.
! 4251: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
! 4252:
! 4253: # The names of the tagged configurations supported by this script.
! 4254: available_tags=
! 4255:
! 4256: # ### BEGIN LIBTOOL CONFIG],
! 4257: [# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
! 4258:
! 4259: # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
! 4260:
! 4261: # Shell to use when invoking shell scripts.
! 4262: SHELL=$lt_SHELL
! 4263:
! 4264: # Whether or not to build shared libraries.
! 4265: build_libtool_libs=$enable_shared
! 4266:
! 4267: # Whether or not to build static libraries.
! 4268: build_old_libs=$enable_static
! 4269:
! 4270: # Whether or not to add -lc for building shared libraries.
! 4271: build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
! 4272:
! 4273: # Whether or not to disallow shared libs when runtime libs are static
! 4274: allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
! 4275:
! 4276: # Whether or not to optimize for fast installation.
! 4277: fast_install=$enable_fast_install
! 4278:
! 4279: # The host system.
! 4280: host_alias=$host_alias
! 4281: host=$host
! 4282: host_os=$host_os
! 4283:
! 4284: # The build system.
! 4285: build_alias=$build_alias
! 4286: build=$build
! 4287: build_os=$build_os
! 4288:
! 4289: # An echo program that does not interpret backslashes.
! 4290: echo=$lt_echo
! 4291:
! 4292: # The archiver.
! 4293: AR=$lt_AR
! 4294: AR_FLAGS=$lt_AR_FLAGS
! 4295:
! 4296: # A C compiler.
! 4297: LTCC=$lt_LTCC
! 4298:
! 4299: # LTCC compiler flags.
! 4300: LTCFLAGS=$lt_LTCFLAGS
! 4301:
! 4302: # A language-specific compiler.
! 4303: CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
! 4304:
! 4305: # Is the compiler the GNU C compiler?
! 4306: with_gcc=$_LT_AC_TAGVAR(GCC, $1)
! 4307:
! 4308: # An ERE matcher.
! 4309: EGREP=$lt_EGREP
! 4310:
! 4311: # The linker used to build libraries.
! 4312: LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
! 4313:
! 4314: # Whether we need hard or soft links.
! 4315: LN_S=$lt_LN_S
! 4316:
! 4317: # A BSD-compatible nm program.
! 4318: NM=$lt_NM
! 4319:
! 4320: # A symbol stripping program
! 4321: STRIP=$lt_STRIP
! 4322:
! 4323: # Used to examine libraries when file_magic_cmd begins "file"
! 4324: MAGIC_CMD=$MAGIC_CMD
! 4325:
! 4326: # Used on cygwin: DLL creation program.
! 4327: DLLTOOL="$DLLTOOL"
! 4328:
! 4329: # Used on cygwin: object dumper.
! 4330: OBJDUMP="$OBJDUMP"
! 4331:
! 4332: # Used on cygwin: assembler.
! 4333: AS="$AS"
! 4334:
! 4335: # The name of the directory that contains temporary libtool files.
! 4336: objdir=$objdir
! 4337:
! 4338: # How to create reloadable object files.
! 4339: reload_flag=$lt_reload_flag
! 4340: reload_cmds=$lt_reload_cmds
! 4341:
! 4342: # How to pass a linker flag through the compiler.
! 4343: wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
! 4344:
! 4345: # Object file suffix (normally "o").
! 4346: objext="$ac_objext"
! 4347:
! 4348: # Old archive suffix (normally "a").
! 4349: libext="$libext"
! 4350:
! 4351: # Shared library suffix (normally ".so").
! 4352: shrext_cmds='$shrext_cmds'
! 4353:
! 4354: # Executable file suffix (normally "").
! 4355: exeext="$exeext"
! 4356:
! 4357: # Additional compiler flags for building library objects.
! 4358: pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
! 4359: pic_mode=$pic_mode
! 4360:
! 4361: # What is the maximum length of a command?
! 4362: max_cmd_len=$lt_cv_sys_max_cmd_len
! 4363:
! 4364: # Does compiler simultaneously support -c and -o options?
! 4365: compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
! 4366:
! 4367: # Must we lock files when doing compilation?
! 4368: need_locks=$lt_need_locks
! 4369:
! 4370: # Do we need the lib prefix for modules?
! 4371: need_lib_prefix=$need_lib_prefix
! 4372:
! 4373: # Do we need a version for libraries?
! 4374: need_version=$need_version
! 4375:
! 4376: # Whether dlopen is supported.
! 4377: dlopen_support=$enable_dlopen
! 4378:
! 4379: # Whether dlopen of programs is supported.
! 4380: dlopen_self=$enable_dlopen_self
! 4381:
! 4382: # Whether dlopen of statically linked programs is supported.
! 4383: dlopen_self_static=$enable_dlopen_self_static
! 4384:
! 4385: # Compiler flag to prevent dynamic linking.
! 4386: link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
! 4387:
! 4388: # Compiler flag to turn off builtin functions.
! 4389: no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
! 4390:
! 4391: # Compiler flag to allow reflexive dlopens.
! 4392: export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
! 4393:
! 4394: # Compiler flag to generate shared objects directly from archives.
! 4395: whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
! 4396:
! 4397: # Compiler flag to generate thread-safe objects.
! 4398: thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
! 4399:
! 4400: # Library versioning type.
! 4401: version_type=$version_type
! 4402:
! 4403: # Format of library name prefix.
! 4404: libname_spec=$lt_libname_spec
! 4405:
! 4406: # List of archive names. First name is the real one, the rest are links.
! 4407: # The last name is the one that the linker finds with -lNAME.
! 4408: library_names_spec=$lt_library_names_spec
! 4409:
! 4410: # The coded name of the library, if different from the real name.
! 4411: soname_spec=$lt_soname_spec
! 4412:
! 4413: # Commands used to build and install an old-style archive.
! 4414: RANLIB=$lt_RANLIB
! 4415: old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
! 4416: old_postinstall_cmds=$lt_old_postinstall_cmds
! 4417: old_postuninstall_cmds=$lt_old_postuninstall_cmds
! 4418:
! 4419: # Create an old-style archive from a shared archive.
! 4420: old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
! 4421:
! 4422: # Create a temporary old-style archive to link instead of a shared archive.
! 4423: old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
! 4424:
! 4425: # Commands used to build and install a shared archive.
! 4426: archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
! 4427: archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
! 4428: postinstall_cmds=$lt_postinstall_cmds
! 4429: postuninstall_cmds=$lt_postuninstall_cmds
! 4430:
! 4431: # Commands used to build a loadable module (assumed same as above if empty)
! 4432: module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
! 4433: module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
! 4434:
! 4435: # Commands to strip libraries.
! 4436: old_striplib=$lt_old_striplib
! 4437: striplib=$lt_striplib
! 4438:
! 4439: # Dependencies to place before the objects being linked to create a
! 4440: # shared library.
! 4441: predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
! 4442:
! 4443: # Dependencies to place after the objects being linked to create a
! 4444: # shared library.
! 4445: postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
! 4446:
! 4447: # Dependencies to place before the objects being linked to create a
! 4448: # shared library.
! 4449: predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
! 4450:
! 4451: # Dependencies to place after the objects being linked to create a
! 4452: # shared library.
! 4453: postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
! 4454:
! 4455: # The library search path used internally by the compiler when linking
! 4456: # a shared library.
! 4457: compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
! 4458:
! 4459: # Method to check whether dependent libraries are shared objects.
! 4460: deplibs_check_method=$lt_deplibs_check_method
! 4461:
! 4462: # Command to use when deplibs_check_method == file_magic.
! 4463: file_magic_cmd=$lt_file_magic_cmd
! 4464:
! 4465: # Flag that allows shared libraries with undefined symbols to be built.
! 4466: allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
! 4467:
! 4468: # Flag that forces no undefined symbols.
! 4469: no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
! 4470:
! 4471: # Commands used to finish a libtool library installation in a directory.
! 4472: finish_cmds=$lt_finish_cmds
! 4473:
! 4474: # Same as above, but a single script fragment to be evaled but not shown.
! 4475: finish_eval=$lt_finish_eval
! 4476:
! 4477: # Take the output of nm and produce a listing of raw symbols and C names.
! 4478: global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
! 4479:
! 4480: # Transform the output of nm in a proper C declaration
! 4481: global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
! 4482:
! 4483: # Transform the output of nm in a C name address pair
! 4484: global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
! 4485:
! 4486: # This is the shared library runtime path variable.
! 4487: runpath_var=$runpath_var
! 4488:
! 4489: # This is the shared library path variable.
! 4490: shlibpath_var=$shlibpath_var
! 4491:
! 4492: # Is shlibpath searched before the hard-coded library search path?
! 4493: shlibpath_overrides_runpath=$shlibpath_overrides_runpath
! 4494:
! 4495: # How to hardcode a shared library path into an executable.
! 4496: hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
! 4497:
! 4498: # Whether we should hardcode library paths into libraries.
! 4499: hardcode_into_libs=$hardcode_into_libs
! 4500:
! 4501: # Flag to hardcode \$libdir into a binary during linking.
! 4502: # This must work even if \$libdir does not exist.
! 4503: hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
! 4504:
! 4505: # If ld is used when linking, flag to hardcode \$libdir into
! 4506: # a binary during linking. This must work even if \$libdir does
! 4507: # not exist.
! 4508: hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
! 4509:
! 4510: # Whether we need a single -rpath flag with a separated argument.
! 4511: hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
! 4512:
! 4513: # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
! 4514: # resulting binary.
! 4515: hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
! 4516:
! 4517: # Set to yes if using the -LDIR flag during linking hardcodes DIR into the
! 4518: # resulting binary.
! 4519: hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
! 4520:
! 4521: # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
! 4522: # the resulting binary.
! 4523: hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
! 4524:
! 4525: # Set to yes if building a shared library automatically hardcodes DIR into the library
! 4526: # and all subsequent libraries and executables linked against it.
! 4527: hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
! 4528:
! 4529: # Variables whose values should be saved in libtool wrapper scripts and
! 4530: # restored at relink time.
! 4531: variables_saved_for_relink="$variables_saved_for_relink"
! 4532:
! 4533: # Whether libtool must link a program against all its dependency libraries.
! 4534: link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
! 4535:
! 4536: # Compile-time system search path for libraries
! 4537: sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
! 4538:
! 4539: # Run-time system search path for libraries
! 4540: sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
! 4541:
! 4542: # Fix the shell variable \$srcfile for the compiler.
! 4543: fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
! 4544:
! 4545: # Set to yes if exported symbols are required.
! 4546: always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
! 4547:
! 4548: # The commands to list exported symbols.
! 4549: export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
! 4550:
! 4551: # The commands to extract the exported symbol list from a shared archive.
! 4552: extract_expsyms_cmds=$lt_extract_expsyms_cmds
! 4553:
! 4554: # Symbols that should not be listed in the preloaded symbols.
! 4555: exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
! 4556:
! 4557: # Symbols that must always be exported.
! 4558: include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
! 4559:
! 4560: ifelse([$1],[],
! 4561: [# ### END LIBTOOL CONFIG],
! 4562: [# ### END LIBTOOL TAG CONFIG: $tagname])
! 4563:
! 4564: __EOF__
! 4565:
! 4566: ifelse([$1],[], [
! 4567: case $host_os in
! 4568: aix3*)
! 4569: cat <<\EOF >> "$cfgfile"
! 4570:
! 4571: # AIX sometimes has problems with the GCC collect2 program. For some
! 4572: # reason, if we set the COLLECT_NAMES environment variable, the problems
! 4573: # vanish in a puff of smoke.
! 4574: if test "X${COLLECT_NAMES+set}" != Xset; then
! 4575: COLLECT_NAMES=
! 4576: export COLLECT_NAMES
! 4577: fi
! 4578: EOF
! 4579: ;;
! 4580: esac
! 4581:
! 4582: # We use sed instead of cat because bash on DJGPP gets confused if
! 4583: # if finds mixed CR/LF and LF-only lines. Since sed operates in
! 4584: # text mode, it properly converts lines to CR/LF. This bash problem
! 4585: # is reportedly fixed, but why not run on old versions too?
! 4586: sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
! 4587:
! 4588: mv -f "$cfgfile" "$ofile" || \
! 4589: (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
! 4590: chmod +x "$ofile"
! 4591: ])
! 4592: else
! 4593: # If there is no Makefile yet, we rely on a make rule to execute
! 4594: # `config.status --recheck' to rerun these tests and create the
! 4595: # libtool script then.
! 4596: ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
! 4597: if test -f "$ltmain_in"; then
! 4598: test -f Makefile && make "$ltmain"
! 4599: fi
! 4600: fi
! 4601: ])# AC_LIBTOOL_CONFIG
! 4602:
! 4603:
! 4604: # AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
! 4605: # -------------------------------------------
! 4606: AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
! 4607: [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
! 4608:
! 4609: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
! 4610:
! 4611: if test "$GCC" = yes; then
! 4612: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
! 4613:
! 4614: AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
! 4615: lt_cv_prog_compiler_rtti_exceptions,
! 4616: [-fno-rtti -fno-exceptions], [],
! 4617: [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
! 4618: fi
! 4619: ])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
! 4620:
! 4621:
! 4622: # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
! 4623: # ---------------------------------
! 4624: AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
! 4625: [AC_REQUIRE([AC_CANONICAL_HOST])
! 4626: AC_REQUIRE([AC_PROG_NM])
! 4627: AC_REQUIRE([AC_OBJEXT])
! 4628: # Check for command to grab the raw symbol name followed by C symbol from nm.
! 4629: AC_MSG_CHECKING([command to parse $NM output from $compiler object])
! 4630: AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
! 4631: [
! 4632: # These are sane defaults that work on at least a few old systems.
! 4633: # [They come from Ultrix. What could be older than Ultrix?!! ;)]
! 4634:
! 4635: # Character class describing NM global symbol codes.
! 4636: symcode='[[BCDEGRST]]'
! 4637:
! 4638: # Regexp to match symbols that can be accessed directly from C.
! 4639: sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
! 4640:
! 4641: # Transform an extracted symbol line into a proper C declaration
! 4642: lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
! 4643:
! 4644: # Transform an extracted symbol line into symbol name and symbol address
! 4645: lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
! 4646:
! 4647: # Define system-specific variables.
! 4648: case $host_os in
! 4649: aix*)
! 4650: symcode='[[BCDT]]'
! 4651: ;;
! 4652: cygwin* | mingw* | pw32*)
! 4653: symcode='[[ABCDGISTW]]'
! 4654: ;;
! 4655: hpux*) # Its linker distinguishes data from code symbols
! 4656: if test "$host_cpu" = ia64; then
! 4657: symcode='[[ABCDEGRST]]'
! 4658: fi
! 4659: lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
! 4660: lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
! 4661: ;;
! 4662: linux*)
! 4663: if test "$host_cpu" = ia64; then
! 4664: symcode='[[ABCDGIRSTW]]'
! 4665: lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
! 4666: lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
! 4667: fi
! 4668: ;;
! 4669: irix* | nonstopux*)
! 4670: symcode='[[BCDEGRST]]'
! 4671: ;;
! 4672: osf*)
! 4673: symcode='[[BCDEGQRST]]'
! 4674: ;;
! 4675: solaris*)
! 4676: symcode='[[BDRT]]'
! 4677: ;;
! 4678: sco3.2v5*)
! 4679: symcode='[[DT]]'
! 4680: ;;
! 4681: sysv4.2uw2*)
! 4682: symcode='[[DT]]'
! 4683: ;;
! 4684: sysv5* | sco5v6* | unixware* | OpenUNIX*)
! 4685: symcode='[[ABDT]]'
! 4686: ;;
! 4687: sysv4)
! 4688: symcode='[[DFNSTU]]'
! 4689: ;;
! 4690: esac
! 4691:
! 4692: # Handle CRLF in mingw tool chain
! 4693: opt_cr=
! 4694: case $build_os in
! 4695: mingw*)
! 4696: opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
! 4697: ;;
! 4698: esac
! 4699:
! 4700: # If we're using GNU nm, then use its standard symbol codes.
! 4701: case `$NM -V 2>&1` in
! 4702: *GNU* | *'with BFD'*)
! 4703: symcode='[[ABCDGIRSTW]]' ;;
! 4704: esac
! 4705:
! 4706: # Try without a prefix undercore, then with it.
! 4707: for ac_symprfx in "" "_"; do
! 4708:
! 4709: # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
! 4710: symxfrm="\\1 $ac_symprfx\\2 \\2"
! 4711:
! 4712: # Write the raw and C identifiers.
! 4713: lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
! 4714:
! 4715: # Check to see that the pipe works correctly.
! 4716: pipe_works=no
! 4717:
! 4718: rm -f conftest*
! 4719: cat > conftest.$ac_ext <<EOF
! 4720: #ifdef __cplusplus
! 4721: extern "C" {
! 4722: #endif
! 4723: char nm_test_var;
! 4724: void nm_test_func(){}
! 4725: #ifdef __cplusplus
! 4726: }
! 4727: #endif
! 4728: int main(){nm_test_var='a';nm_test_func();return(0);}
! 4729: EOF
! 4730:
! 4731: if AC_TRY_EVAL(ac_compile); then
! 4732: # Now try to grab the symbols.
! 4733: nlist=conftest.nm
! 4734: if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
! 4735: # Try sorting and uniquifying the output.
! 4736: if sort "$nlist" | uniq > "$nlist"T; then
! 4737: mv -f "$nlist"T "$nlist"
! 4738: else
! 4739: rm -f "$nlist"T
! 4740: fi
! 4741:
! 4742: # Make sure that we snagged all the symbols we need.
! 4743: if grep ' nm_test_var$' "$nlist" >/dev/null; then
! 4744: if grep ' nm_test_func$' "$nlist" >/dev/null; then
! 4745: cat <<EOF > conftest.$ac_ext
! 4746: #ifdef __cplusplus
! 4747: extern "C" {
! 4748: #endif
! 4749:
! 4750: EOF
! 4751: # Now generate the symbol file.
! 4752: eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
! 4753:
! 4754: cat <<EOF >> conftest.$ac_ext
! 4755: #if defined (__STDC__) && __STDC__
! 4756: # define lt_ptr_t void *
! 4757: #else
! 4758: # define lt_ptr_t char *
! 4759: # define const
! 4760: #endif
! 4761:
! 4762: /* The mapping between symbol names and symbols. */
! 4763: const struct {
! 4764: const char *name;
! 4765: lt_ptr_t address;
! 4766: }
! 4767: lt_preloaded_symbols[[]] =
! 4768: {
! 4769: EOF
! 4770: $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
! 4771: cat <<\EOF >> conftest.$ac_ext
! 4772: {0, (lt_ptr_t) 0}
! 4773: };
! 4774:
! 4775: #ifdef __cplusplus
! 4776: }
! 4777: #endif
! 4778: EOF
! 4779: # Now try linking the two files.
! 4780: mv conftest.$ac_objext conftstm.$ac_objext
! 4781: lt_save_LIBS="$LIBS"
! 4782: lt_save_CFLAGS="$CFLAGS"
! 4783: LIBS="conftstm.$ac_objext"
! 4784: CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
! 4785: if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
! 4786: pipe_works=yes
! 4787: fi
! 4788: LIBS="$lt_save_LIBS"
! 4789: CFLAGS="$lt_save_CFLAGS"
! 4790: else
! 4791: echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
! 4792: fi
! 4793: else
! 4794: echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
! 4795: fi
! 4796: else
! 4797: echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
! 4798: fi
! 4799: else
! 4800: echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
! 4801: cat conftest.$ac_ext >&5
! 4802: fi
! 4803: rm -f conftest* conftst*
! 4804:
! 4805: # Do not use the global_symbol_pipe unless it works.
! 4806: if test "$pipe_works" = yes; then
! 4807: break
! 4808: else
! 4809: lt_cv_sys_global_symbol_pipe=
! 4810: fi
! 4811: done
! 4812: ])
! 4813: if test -z "$lt_cv_sys_global_symbol_pipe"; then
! 4814: lt_cv_sys_global_symbol_to_cdecl=
! 4815: fi
! 4816: if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
! 4817: AC_MSG_RESULT(failed)
! 4818: else
! 4819: AC_MSG_RESULT(ok)
! 4820: fi
! 4821: ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
! 4822:
! 4823:
! 4824: # AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
! 4825: # ---------------------------------------
! 4826: AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
! 4827: [_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
! 4828: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 4829: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
! 4830:
! 4831: AC_MSG_CHECKING([for $compiler option to produce PIC])
! 4832: ifelse([$1],[CXX],[
! 4833: # C++ specific cases for pic, static, wl, etc.
! 4834: if test "$GXX" = yes; then
! 4835: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4836: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
! 4837:
! 4838: case $host_os in
! 4839: aix*)
! 4840: # All AIX code is PIC.
! 4841: if test "$host_cpu" = ia64; then
! 4842: # AIX 5 now supports IA64 processor
! 4843: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 4844: fi
! 4845: ;;
! 4846: amigaos*)
! 4847: # FIXME: we need at least 68020 code to build shared libraries, but
! 4848: # adding the `-m68020' flag to GCC prevents building anything better,
! 4849: # like `-m68040'.
! 4850: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
! 4851: ;;
! 4852: beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
! 4853: # PIC is the default for these OSes.
! 4854: ;;
! 4855: mingw* | os2* | pw32*)
! 4856: # This hack is so that the source file can tell whether it is being
! 4857: # built for inclusion in a dll (and should export symbols for example).
! 4858: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
! 4859: ;;
! 4860: darwin* | rhapsody*)
! 4861: # PIC is the default on this platform
! 4862: # Common symbols not allowed in MH_DYLIB files
! 4863: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
! 4864: ;;
! 4865: *djgpp*)
! 4866: # DJGPP does not support shared libraries at all
! 4867: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 4868: ;;
! 4869: interix3*)
! 4870: # Interix 3.x gcc -fpic/-fPIC options generate broken code.
! 4871: # Instead, we relocate shared libraries at runtime.
! 4872: ;;
! 4873: sysv4*MP*)
! 4874: if test -d /usr/nec; then
! 4875: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
! 4876: fi
! 4877: ;;
! 4878: hpux*)
! 4879: # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
! 4880: # not for PA HP-UX.
! 4881: case $host_cpu in
! 4882: hppa*64*|ia64*)
! 4883: ;;
! 4884: *)
! 4885: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 4886: ;;
! 4887: esac
! 4888: ;;
! 4889: *)
! 4890: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 4891: ;;
! 4892: esac
! 4893: else
! 4894: case $host_os in
! 4895: aix4* | aix5*)
! 4896: # All AIX code is PIC.
! 4897: if test "$host_cpu" = ia64; then
! 4898: # AIX 5 now supports IA64 processor
! 4899: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 4900: else
! 4901: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
! 4902: fi
! 4903: ;;
! 4904: chorus*)
! 4905: case $cc_basename in
! 4906: cxch68*)
! 4907: # Green Hills C++ Compiler
! 4908: # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
! 4909: ;;
! 4910: esac
! 4911: ;;
! 4912: darwin*)
! 4913: # PIC is the default on this platform
! 4914: # Common symbols not allowed in MH_DYLIB files
! 4915: case $cc_basename in
! 4916: xlc*)
! 4917: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
! 4918: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4919: ;;
! 4920: esac
! 4921: ;;
! 4922: dgux*)
! 4923: case $cc_basename in
! 4924: ec++*)
! 4925: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 4926: ;;
! 4927: ghcx*)
! 4928: # Green Hills C++ Compiler
! 4929: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 4930: ;;
! 4931: *)
! 4932: ;;
! 4933: esac
! 4934: ;;
! 4935: freebsd* | kfreebsd*-gnu | dragonfly*)
! 4936: # FreeBSD uses GNU C++
! 4937: ;;
! 4938: hpux9* | hpux10* | hpux11*)
! 4939: case $cc_basename in
! 4940: CC*)
! 4941: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4942: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
! 4943: if test "$host_cpu" != ia64; then
! 4944: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
! 4945: fi
! 4946: ;;
! 4947: aCC*)
! 4948: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4949: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
! 4950: case $host_cpu in
! 4951: hppa*64*|ia64*)
! 4952: # +Z the default
! 4953: ;;
! 4954: *)
! 4955: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
! 4956: ;;
! 4957: esac
! 4958: ;;
! 4959: *)
! 4960: ;;
! 4961: esac
! 4962: ;;
! 4963: interix*)
! 4964: # This is c89, which is MS Visual C++ (no shared libs)
! 4965: # Anyone wants to do a port?
! 4966: ;;
! 4967: irix5* | irix6* | nonstopux*)
! 4968: case $cc_basename in
! 4969: CC*)
! 4970: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4971: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 4972: # CC pic flag -KPIC is the default.
! 4973: ;;
! 4974: *)
! 4975: ;;
! 4976: esac
! 4977: ;;
! 4978: linux*)
! 4979: case $cc_basename in
! 4980: KCC*)
! 4981: # KAI C++ Compiler
! 4982: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
! 4983: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 4984: ;;
! 4985: icpc* | ecpc*)
! 4986: # Intel C++
! 4987: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4988: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 4989: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
! 4990: ;;
! 4991: pgCC*)
! 4992: # Portland Group C++ compiler.
! 4993: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4994: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
! 4995: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 4996: ;;
! 4997: cxx*)
! 4998: # Compaq C++
! 4999: # Make sure the PIC flag is empty. It appears that all Alpha
! 5000: # Linux and Compaq Tru64 Unix objects are PIC.
! 5001: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 5002: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 5003: ;;
! 5004: *)
! 5005: ;;
! 5006: esac
! 5007: ;;
! 5008: lynxos*)
! 5009: ;;
! 5010: m88k*)
! 5011: ;;
! 5012: mvs*)
! 5013: case $cc_basename in
! 5014: cxx*)
! 5015: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
! 5016: ;;
! 5017: *)
! 5018: ;;
! 5019: esac
! 5020: ;;
! 5021: netbsd*)
! 5022: ;;
! 5023: osf3* | osf4* | osf5*)
! 5024: case $cc_basename in
! 5025: KCC*)
! 5026: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
! 5027: ;;
! 5028: RCC*)
! 5029: # Rational C++ 2.4.1
! 5030: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 5031: ;;
! 5032: cxx*)
! 5033: # Digital/Compaq C++
! 5034: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5035: # Make sure the PIC flag is empty. It appears that all Alpha
! 5036: # Linux and Compaq Tru64 Unix objects are PIC.
! 5037: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 5038: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 5039: ;;
! 5040: *)
! 5041: ;;
! 5042: esac
! 5043: ;;
! 5044: psos*)
! 5045: ;;
! 5046: solaris*)
! 5047: case $cc_basename in
! 5048: CC*)
! 5049: # Sun C++ 4.2, 5.x and Centerline C++
! 5050: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5051: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5052: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
! 5053: ;;
! 5054: gcx*)
! 5055: # Green Hills C++ Compiler
! 5056: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
! 5057: ;;
! 5058: *)
! 5059: ;;
! 5060: esac
! 5061: ;;
! 5062: sunos4*)
! 5063: case $cc_basename in
! 5064: CC*)
! 5065: # Sun C++ 4.x
! 5066: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 5067: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5068: ;;
! 5069: lcc*)
! 5070: # Lucid
! 5071: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 5072: ;;
! 5073: *)
! 5074: ;;
! 5075: esac
! 5076: ;;
! 5077: tandem*)
! 5078: case $cc_basename in
! 5079: NCC*)
! 5080: # NonStop-UX NCC 3.20
! 5081: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5082: ;;
! 5083: *)
! 5084: ;;
! 5085: esac
! 5086: ;;
! 5087: sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
! 5088: case $cc_basename in
! 5089: CC*)
! 5090: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5091: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5092: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5093: ;;
! 5094: esac
! 5095: ;;
! 5096: vxworks*)
! 5097: ;;
! 5098: *)
! 5099: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
! 5100: ;;
! 5101: esac
! 5102: fi
! 5103: ],
! 5104: [
! 5105: if test "$GCC" = yes; then
! 5106: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5107: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
! 5108:
! 5109: case $host_os in
! 5110: aix*)
! 5111: # All AIX code is PIC.
! 5112: if test "$host_cpu" = ia64; then
! 5113: # AIX 5 now supports IA64 processor
! 5114: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5115: fi
! 5116: ;;
! 5117:
! 5118: amigaos*)
! 5119: # FIXME: we need at least 68020 code to build shared libraries, but
! 5120: # adding the `-m68020' flag to GCC prevents building anything better,
! 5121: # like `-m68040'.
! 5122: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
! 5123: ;;
! 5124:
! 5125: beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
! 5126: # PIC is the default for these OSes.
! 5127: ;;
! 5128:
! 5129: mingw* | pw32* | os2*)
! 5130: # This hack is so that the source file can tell whether it is being
! 5131: # built for inclusion in a dll (and should export symbols for example).
! 5132: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
! 5133: ;;
! 5134:
! 5135: darwin* | rhapsody*)
! 5136: # PIC is the default on this platform
! 5137: # Common symbols not allowed in MH_DYLIB files
! 5138: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
! 5139: ;;
! 5140:
! 5141: interix3*)
! 5142: # Interix 3.x gcc -fpic/-fPIC options generate broken code.
! 5143: # Instead, we relocate shared libraries at runtime.
! 5144: ;;
! 5145:
! 5146: msdosdjgpp*)
! 5147: # Just because we use GCC doesn't mean we suddenly get shared libraries
! 5148: # on systems that don't support them.
! 5149: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
! 5150: enable_shared=no
! 5151: ;;
! 5152:
! 5153: sysv4*MP*)
! 5154: if test -d /usr/nec; then
! 5155: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
! 5156: fi
! 5157: ;;
! 5158:
! 5159: hpux*)
! 5160: # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
! 5161: # not for PA HP-UX.
! 5162: case $host_cpu in
! 5163: hppa*64*|ia64*)
! 5164: # +Z the default
! 5165: ;;
! 5166: *)
! 5167: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 5168: ;;
! 5169: esac
! 5170: ;;
! 5171:
! 5172: *)
! 5173: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 5174: ;;
! 5175: esac
! 5176: else
! 5177: # PORTME Check for flag to pass linker flags through the system compiler.
! 5178: case $host_os in
! 5179: aix*)
! 5180: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5181: if test "$host_cpu" = ia64; then
! 5182: # AIX 5 now supports IA64 processor
! 5183: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5184: else
! 5185: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
! 5186: fi
! 5187: ;;
! 5188: darwin*)
! 5189: # PIC is the default on this platform
! 5190: # Common symbols not allowed in MH_DYLIB files
! 5191: case $cc_basename in
! 5192: xlc*)
! 5193: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
! 5194: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5195: ;;
! 5196: esac
! 5197: ;;
! 5198:
! 5199: mingw* | pw32* | os2*)
! 5200: # This hack is so that the source file can tell whether it is being
! 5201: # built for inclusion in a dll (and should export symbols for example).
! 5202: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
! 5203: ;;
! 5204:
! 5205: hpux9* | hpux10* | hpux11*)
! 5206: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5207: # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
! 5208: # not for PA HP-UX.
! 5209: case $host_cpu in
! 5210: hppa*64*|ia64*)
! 5211: # +Z the default
! 5212: ;;
! 5213: *)
! 5214: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
! 5215: ;;
! 5216: esac
! 5217: # Is there a better lt_prog_compiler_static that works with the bundled CC?
! 5218: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
! 5219: ;;
! 5220:
! 5221: irix5* | irix6* | nonstopux*)
! 5222: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5223: # PIC (with -KPIC) is the default.
! 5224: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 5225: ;;
! 5226:
! 5227: newsos6)
! 5228: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5229: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5230: ;;
! 5231:
! 5232: linux*)
! 5233: case $cc_basename in
! 5234: icc* | ecc*)
! 5235: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5236: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5237: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
! 5238: ;;
! 5239: pgcc* | pgf77* | pgf90* | pgf95*)
! 5240: # Portland Group compilers (*not* the Pentium gcc compiler,
! 5241: # which looks to be a dead project)
! 5242: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5243: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
! 5244: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5245: ;;
! 5246: ccc*)
! 5247: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5248: # All Alpha code is PIC.
! 5249: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 5250: ;;
! 5251: esac
! 5252: ;;
! 5253:
! 5254: osf3* | osf4* | osf5*)
! 5255: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5256: # All OSF/1 code is PIC.
! 5257: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 5258: ;;
! 5259:
! 5260: solaris*)
! 5261: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5262: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5263: case $cc_basename in
! 5264: f77* | f90* | f95*)
! 5265: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
! 5266: *)
! 5267: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
! 5268: esac
! 5269: ;;
! 5270:
! 5271: sunos4*)
! 5272: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
! 5273: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
! 5274: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5275: ;;
! 5276:
! 5277: sysv4 | sysv4.2uw2* | sysv4.3*)
! 5278: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5279: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5280: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5281: ;;
! 5282:
! 5283: sysv4*MP*)
! 5284: if test -d /usr/nec ;then
! 5285: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
! 5286: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5287: fi
! 5288: ;;
! 5289:
! 5290: sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
! 5291: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5292: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5293: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5294: ;;
! 5295:
! 5296: unicos*)
! 5297: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5298: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
! 5299: ;;
! 5300:
! 5301: uts4*)
! 5302: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 5303: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5304: ;;
! 5305:
! 5306: *)
! 5307: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
! 5308: ;;
! 5309: esac
! 5310: fi
! 5311: ])
! 5312: AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
! 5313:
! 5314: #
! 5315: # Check to make sure the PIC flag actually works.
! 5316: #
! 5317: if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
! 5318: AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
! 5319: _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
! 5320: [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
! 5321: [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
! 5322: "" | " "*) ;;
! 5323: *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
! 5324: esac],
! 5325: [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 5326: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
! 5327: fi
! 5328: case $host_os in
! 5329: # For platforms which do not support PIC, -DPIC is meaningless:
! 5330: *djgpp*)
! 5331: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 5332: ;;
! 5333: *)
! 5334: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
! 5335: ;;
! 5336: esac
! 5337:
! 5338: #
! 5339: # Check to make sure the static flag actually works.
! 5340: #
! 5341: wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
! 5342: AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
! 5343: _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
! 5344: $lt_tmp_static_flag,
! 5345: [],
! 5346: [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
! 5347: ])
! 5348:
! 5349:
! 5350: # AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
! 5351: # ------------------------------------
! 5352: # See if the linker supports building shared libraries.
! 5353: AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
! 5354: [AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
! 5355: ifelse([$1],[CXX],[
! 5356: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
! 5357: case $host_os in
! 5358: aix4* | aix5*)
! 5359: # If we're using GNU nm, then we don't want the "-C" option.
! 5360: # -C means demangle to AIX nm, but means don't demangle with GNU nm
! 5361: if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
! 5362: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
! 5363: else
! 5364: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
! 5365: fi
! 5366: ;;
! 5367: pw32*)
! 5368: _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
! 5369: ;;
! 5370: cygwin* | mingw*)
! 5371: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
! 5372: ;;
! 5373: *)
! 5374: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
! 5375: ;;
! 5376: esac
! 5377: ],[
! 5378: runpath_var=
! 5379: _LT_AC_TAGVAR(allow_undefined_flag, $1)=
! 5380: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
! 5381: _LT_AC_TAGVAR(archive_cmds, $1)=
! 5382: _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
! 5383: _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
! 5384: _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
! 5385: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
! 5386: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 5387: _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
! 5388: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
! 5389: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
! 5390: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 5391: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 5392: _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
! 5393: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
! 5394: _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
! 5395: _LT_AC_TAGVAR(hardcode_automatic, $1)=no
! 5396: _LT_AC_TAGVAR(module_cmds, $1)=
! 5397: _LT_AC_TAGVAR(module_expsym_cmds, $1)=
! 5398: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 5399: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
! 5400: # include_expsyms should be a list of space-separated symbols to be *always*
! 5401: # included in the symbol list
! 5402: _LT_AC_TAGVAR(include_expsyms, $1)=
! 5403: # exclude_expsyms can be an extended regexp of symbols to exclude
! 5404: # it will be wrapped by ` (' and `)$', so one must not match beginning or
! 5405: # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
! 5406: # as well as any symbol that contains `d'.
! 5407: _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
! 5408: # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
! 5409: # platforms (ab)use it in PIC code, but their linkers get confused if
! 5410: # the symbol is explicitly referenced. Since portable code cannot
! 5411: # rely on this symbol name, it's probably fine to never include it in
! 5412: # preloaded symbol tables.
! 5413: extract_expsyms_cmds=
! 5414: # Just being paranoid about ensuring that cc_basename is set.
! 5415: _LT_CC_BASENAME([$compiler])
! 5416: case $host_os in
! 5417: cygwin* | mingw* | pw32*)
! 5418: # FIXME: the MSVC++ port hasn't been tested in a loooong time
! 5419: # When not using gcc, we currently assume that we are using
! 5420: # Microsoft Visual C++.
! 5421: if test "$GCC" != yes; then
! 5422: with_gnu_ld=no
! 5423: fi
! 5424: ;;
! 5425: interix*)
! 5426: # we just hope/assume this is gcc and not c89 (= MSVC++)
! 5427: with_gnu_ld=yes
! 5428: ;;
! 5429: openbsd*)
! 5430: with_gnu_ld=no
! 5431: ;;
! 5432: esac
! 5433:
! 5434: _LT_AC_TAGVAR(ld_shlibs, $1)=yes
! 5435: if test "$with_gnu_ld" = yes; then
! 5436: # If archive_cmds runs LD, not CC, wlarc should be empty
! 5437: wlarc='${wl}'
! 5438:
! 5439: # Set some defaults for GNU ld with shared library support. These
! 5440: # are reset later if shared libraries are not supported. Putting them
! 5441: # here allows them to be overridden if necessary.
! 5442: runpath_var=LD_RUN_PATH
! 5443: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
! 5444: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 5445: # ancient GNU ld didn't support --whole-archive et. al.
! 5446: if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
! 5447: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
! 5448: else
! 5449: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 5450: fi
! 5451: supports_anon_versioning=no
! 5452: case `$LD -v 2>/dev/null` in
! 5453: *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
! 5454: *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
! 5455: *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
! 5456: *\ 2.11.*) ;; # other 2.11 versions
! 5457: *) supports_anon_versioning=yes ;;
! 5458: esac
! 5459:
! 5460: # See if GNU ld supports shared libraries.
! 5461: case $host_os in
! 5462: aix3* | aix4* | aix5*)
! 5463: # On AIX/PPC, the GNU linker is very broken
! 5464: if test "$host_cpu" != ia64; then
! 5465: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5466: cat <<EOF 1>&2
! 5467:
! 5468: *** Warning: the GNU linker, at least up to release 2.9.1, is reported
! 5469: *** to be unable to reliably create shared libraries on AIX.
! 5470: *** Therefore, libtool is disabling shared libraries support. If you
! 5471: *** really care for shared libraries, you may want to modify your PATH
! 5472: *** so that a non-GNU linker is found, and then restart.
! 5473:
! 5474: EOF
! 5475: fi
! 5476: ;;
! 5477:
! 5478: amigaos*)
! 5479: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
! 5480: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5481: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5482:
! 5483: # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
! 5484: # that the semantics of dynamic libraries on AmigaOS, at least up
! 5485: # to version 4, is to share data among multiple programs linked
! 5486: # with the same dynamic library. Since this doesn't match the
! 5487: # behavior of shared libraries on other platforms, we can't use
! 5488: # them.
! 5489: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5490: ;;
! 5491:
! 5492: beos*)
! 5493: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5494: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 5495: # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
! 5496: # support --undefined. This deserves some investigation. FIXME
! 5497: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5498: else
! 5499: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5500: fi
! 5501: ;;
! 5502:
! 5503: cygwin* | mingw* | pw32*)
! 5504: # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
! 5505: # as there is no search path for DLLs.
! 5506: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5507: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 5508: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 5509: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
! 5510: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
! 5511:
! 5512: if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
! 5513: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
! 5514: # If the export-symbols file already is a .def file (1st line
! 5515: # is EXPORTS), use it as is; otherwise, prepend...
! 5516: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
! 5517: cp $export_symbols $output_objdir/$soname.def;
! 5518: else
! 5519: echo EXPORTS > $output_objdir/$soname.def;
! 5520: cat $export_symbols >> $output_objdir/$soname.def;
! 5521: fi~
! 5522: $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
! 5523: else
! 5524: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5525: fi
! 5526: ;;
! 5527:
! 5528: interix3*)
! 5529: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 5530: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5531: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 5532: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 5533: # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
! 5534: # Instead, shared libraries are loaded at an image base (0x10000000 by
! 5535: # default) and relocated if they conflict, which is a slow very memory
! 5536: # consuming and fragmenting process. To avoid this, we pick a random,
! 5537: # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
! 5538: # time. Moving up from 0x10000000 also allows more sbrk(2) space.
! 5539: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
! 5540: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
! 5541: ;;
! 5542:
! 5543: linux*)
! 5544: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5545: tmp_addflag=
! 5546: case $cc_basename,$host_cpu in
! 5547: pgcc*) # Portland Group C compiler
! 5548: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
! 5549: tmp_addflag=' $pic_flag'
! 5550: ;;
! 5551: pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
! 5552: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
! 5553: tmp_addflag=' $pic_flag -Mnomain' ;;
! 5554: ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
! 5555: tmp_addflag=' -i_dynamic' ;;
! 5556: efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
! 5557: tmp_addflag=' -i_dynamic -nofor_main' ;;
! 5558: ifc* | ifort*) # Intel Fortran compiler
! 5559: tmp_addflag=' -nofor_main' ;;
! 5560: esac
! 5561: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5562:
! 5563: if test $supports_anon_versioning = yes; then
! 5564: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
! 5565: cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
! 5566: $echo "local: *; };" >> $output_objdir/$libname.ver~
! 5567: $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
! 5568: fi
! 5569: else
! 5570: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5571: fi
! 5572: ;;
! 5573:
! 5574: netbsd*)
! 5575: if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
! 5576: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
! 5577: wlarc=
! 5578: else
! 5579: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5580: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 5581: fi
! 5582: ;;
! 5583:
! 5584: solaris*)
! 5585: if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
! 5586: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5587: cat <<EOF 1>&2
! 5588:
! 5589: *** Warning: The releases 2.8.* of the GNU linker cannot reliably
! 5590: *** create shared libraries on Solaris systems. Therefore, libtool
! 5591: *** is disabling shared libraries support. We urge you to upgrade GNU
! 5592: *** binutils to release 2.9.1 or newer. Another option is to modify
! 5593: *** your PATH or compiler configuration so that the native linker is
! 5594: *** used, and then restart.
! 5595:
! 5596: EOF
! 5597: elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5598: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5599: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 5600: else
! 5601: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5602: fi
! 5603: ;;
! 5604:
! 5605: sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
! 5606: case `$LD -v 2>&1` in
! 5607: *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
! 5608: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5609: cat <<_LT_EOF 1>&2
! 5610:
! 5611: *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
! 5612: *** reliably create shared libraries on SCO systems. Therefore, libtool
! 5613: *** is disabling shared libraries support. We urge you to upgrade GNU
! 5614: *** binutils to release 2.16.91.0.3 or newer. Another option is to modify
! 5615: *** your PATH or compiler configuration so that the native linker is
! 5616: *** used, and then restart.
! 5617:
! 5618: _LT_EOF
! 5619: ;;
! 5620: *)
! 5621: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5622: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
! 5623: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
! 5624: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
! 5625: else
! 5626: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5627: fi
! 5628: ;;
! 5629: esac
! 5630: ;;
! 5631:
! 5632: sunos4*)
! 5633: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
! 5634: wlarc=
! 5635: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5636: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5637: ;;
! 5638:
! 5639: *)
! 5640: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5641: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5642: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 5643: else
! 5644: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5645: fi
! 5646: ;;
! 5647: esac
! 5648:
! 5649: if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
! 5650: runpath_var=
! 5651: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
! 5652: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
! 5653: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 5654: fi
! 5655: else
! 5656: # PORTME fill in a description of your system's linker (not GNU ld)
! 5657: case $host_os in
! 5658: aix3*)
! 5659: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 5660: _LT_AC_TAGVAR(always_export_symbols, $1)=yes
! 5661: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
! 5662: # Note: this linker hardcodes the directories in LIBPATH if there
! 5663: # are no directories specified by -L.
! 5664: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5665: if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
! 5666: # Neither direct hardcoding nor static linking is supported with a
! 5667: # broken collect2.
! 5668: _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
! 5669: fi
! 5670: ;;
! 5671:
! 5672: aix4* | aix5*)
! 5673: if test "$host_cpu" = ia64; then
! 5674: # On IA64, the linker does run time linking by default, so we don't
! 5675: # have to do anything special.
! 5676: aix_use_runtimelinking=no
! 5677: exp_sym_flag='-Bexport'
! 5678: no_entry_flag=""
! 5679: else
! 5680: # If we're using GNU nm, then we don't want the "-C" option.
! 5681: # -C means demangle to AIX nm, but means don't demangle with GNU nm
! 5682: if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
! 5683: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
! 5684: else
! 5685: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
! 5686: fi
! 5687: aix_use_runtimelinking=no
! 5688:
! 5689: # Test if we are trying to use run time linking or normal
! 5690: # AIX style linking. If -brtl is somewhere in LDFLAGS, we
! 5691: # need to do runtime linking.
! 5692: case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
! 5693: for ld_flag in $LDFLAGS; do
! 5694: if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
! 5695: aix_use_runtimelinking=yes
! 5696: break
! 5697: fi
! 5698: done
! 5699: ;;
! 5700: esac
! 5701:
! 5702: exp_sym_flag='-bexport'
! 5703: no_entry_flag='-bnoentry'
! 5704: fi
! 5705:
! 5706: # When large executables or shared objects are built, AIX ld can
! 5707: # have problems creating the table of contents. If linking a library
! 5708: # or program results in "error TOC overflow" add -mminimal-toc to
! 5709: # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
! 5710: # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
! 5711:
! 5712: _LT_AC_TAGVAR(archive_cmds, $1)=''
! 5713: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5714: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
! 5715: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 5716:
! 5717: if test "$GCC" = yes; then
! 5718: case $host_os in aix4.[[012]]|aix4.[[012]].*)
! 5719: # We only want to do this on AIX 4.2 and lower, the check
! 5720: # below for broken collect2 doesn't work under 4.3+
! 5721: collect2name=`${CC} -print-prog-name=collect2`
! 5722: if test -f "$collect2name" && \
! 5723: strings "$collect2name" | grep resolve_lib_name >/dev/null
! 5724: then
! 5725: # We have reworked collect2
! 5726: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5727: else
! 5728: # We have old collect2
! 5729: _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
! 5730: # It fails to find uninstalled libraries when the uninstalled
! 5731: # path is not listed in the libpath. Setting hardcode_minus_L
! 5732: # to unsupported forces relinking
! 5733: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5734: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5735: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 5736: fi
! 5737: ;;
! 5738: esac
! 5739: shared_flag='-shared'
! 5740: if test "$aix_use_runtimelinking" = yes; then
! 5741: shared_flag="$shared_flag "'${wl}-G'
! 5742: fi
! 5743: else
! 5744: # not using gcc
! 5745: if test "$host_cpu" = ia64; then
! 5746: # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
! 5747: # chokes on -Wl,-G. The following line is correct:
! 5748: shared_flag='-G'
! 5749: else
! 5750: if test "$aix_use_runtimelinking" = yes; then
! 5751: shared_flag='${wl}-G'
! 5752: else
! 5753: shared_flag='${wl}-bM:SRE'
! 5754: fi
! 5755: fi
! 5756: fi
! 5757:
! 5758: # It seems that -bexpall does not export symbols beginning with
! 5759: # underscore (_), so it is better to generate a list of symbols to export.
! 5760: _LT_AC_TAGVAR(always_export_symbols, $1)=yes
! 5761: if test "$aix_use_runtimelinking" = yes; then
! 5762: # Warning - without using the other runtime loading flags (-brtl),
! 5763: # -berok will link without error, but may produce a broken library.
! 5764: _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
! 5765: # Determine the default libpath from the value encoded in an empty executable.
! 5766: _LT_AC_SYS_LIBPATH_AIX
! 5767: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
! 5768: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
! 5769: else
! 5770: if test "$host_cpu" = ia64; then
! 5771: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
! 5772: _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
! 5773: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
! 5774: else
! 5775: # Determine the default libpath from the value encoded in an empty executable.
! 5776: _LT_AC_SYS_LIBPATH_AIX
! 5777: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
! 5778: # Warning - without using the other run time loading flags,
! 5779: # -berok will link without error, but may produce a broken library.
! 5780: _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
! 5781: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
! 5782: # Exported symbols can be pulled into shared objects from archives
! 5783: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
! 5784: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
! 5785: # This is similar to how AIX traditionally builds its shared libraries.
! 5786: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
! 5787: fi
! 5788: fi
! 5789: ;;
! 5790:
! 5791: amigaos*)
! 5792: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
! 5793: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5794: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5795: # see comment about different semantics on the GNU ld section
! 5796: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5797: ;;
! 5798:
! 5799: bsdi[[45]]*)
! 5800: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
! 5801: ;;
! 5802:
! 5803: cygwin* | mingw* | pw32*)
! 5804: # When not using gcc, we currently assume that we are using
! 5805: # Microsoft Visual C++.
! 5806: # hardcode_libdir_flag_spec is actually meaningless, as there is
! 5807: # no search path for DLLs.
! 5808: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
! 5809: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 5810: # Tell ltmain to make .lib files, not .a files.
! 5811: libext=lib
! 5812: # Tell ltmain to make .dll files, not .so files.
! 5813: shrext_cmds=".dll"
! 5814: # FIXME: Setting linknames here is a bad hack.
! 5815: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
! 5816: # The linker will automatically build a .lib file if we build a DLL.
! 5817: _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
! 5818: # FIXME: Should let the user specify the lib program.
! 5819: _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
! 5820: _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
! 5821: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
! 5822: ;;
! 5823:
! 5824: darwin* | rhapsody*)
! 5825: case $host_os in
! 5826: rhapsody* | darwin1.[[012]])
! 5827: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
! 5828: ;;
! 5829: *) # Darwin 1.3 on
! 5830: if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
! 5831: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
! 5832: else
! 5833: case ${MACOSX_DEPLOYMENT_TARGET} in
! 5834: 10.[[012]])
! 5835: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
! 5836: ;;
! 5837: 10.*)
! 5838: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
! 5839: ;;
! 5840: esac
! 5841: fi
! 5842: ;;
! 5843: esac
! 5844: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 5845: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 5846: _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
! 5847: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
! 5848: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
! 5849: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 5850: if test "$GCC" = yes ; then
! 5851: output_verbose_link_cmd='echo'
! 5852: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
! 5853: _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
! 5854: # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
! 5855: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 5856: _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 5857: else
! 5858: case $cc_basename in
! 5859: xlc*)
! 5860: output_verbose_link_cmd='echo'
! 5861: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
! 5862: _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
! 5863: # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
! 5864: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 5865: _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 5866: ;;
! 5867: *)
! 5868: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5869: ;;
! 5870: esac
! 5871: fi
! 5872: ;;
! 5873:
! 5874: dgux*)
! 5875: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 5876: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5877: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5878: ;;
! 5879:
! 5880: freebsd1*)
! 5881: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5882: ;;
! 5883:
! 5884: # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
! 5885: # support. Future versions do this automatically, but an explicit c++rt0.o
! 5886: # does not break anything, and helps significantly (at the cost of a little
! 5887: # extra space).
! 5888: freebsd2.2*)
! 5889: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
! 5890: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 5891: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5892: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5893: ;;
! 5894:
! 5895: # Unfortunately, older versions of FreeBSD 2 do not have this feature.
! 5896: freebsd2*)
! 5897: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
! 5898: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5899: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5900: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5901: ;;
! 5902:
! 5903: # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
! 5904: freebsd* | kfreebsd*-gnu | dragonfly*)
! 5905: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
! 5906: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 5907: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5908: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5909: ;;
! 5910:
! 5911: hpux9*)
! 5912: if test "$GCC" = yes; then
! 5913: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
! 5914: else
! 5915: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
! 5916: fi
! 5917: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 5918: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 5919: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5920:
! 5921: # hardcode_minus_L: Not really in the search PATH,
! 5922: # but as the default location of the library.
! 5923: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5924: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 5925: ;;
! 5926:
! 5927: hpux10*)
! 5928: if test "$GCC" = yes -a "$with_gnu_ld" = no; then
! 5929: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
! 5930: else
! 5931: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
! 5932: fi
! 5933: if test "$with_gnu_ld" = no; then
! 5934: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 5935: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 5936:
! 5937: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5938: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 5939:
! 5940: # hardcode_minus_L: Not really in the search PATH,
! 5941: # but as the default location of the library.
! 5942: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5943: fi
! 5944: ;;
! 5945:
! 5946: hpux11*)
! 5947: if test "$GCC" = yes -a "$with_gnu_ld" = no; then
! 5948: case $host_cpu in
! 5949: hppa*64*)
! 5950: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 5951: ;;
! 5952: ia64*)
! 5953: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
! 5954: ;;
! 5955: *)
! 5956: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
! 5957: ;;
! 5958: esac
! 5959: else
! 5960: case $host_cpu in
! 5961: hppa*64*)
! 5962: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 5963: ;;
! 5964: ia64*)
! 5965: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
! 5966: ;;
! 5967: *)
! 5968: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
! 5969: ;;
! 5970: esac
! 5971: fi
! 5972: if test "$with_gnu_ld" = no; then
! 5973: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 5974: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 5975:
! 5976: case $host_cpu in
! 5977: hppa*64*|ia64*)
! 5978: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
! 5979: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 5980: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5981: ;;
! 5982: *)
! 5983: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5984: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 5985:
! 5986: # hardcode_minus_L: Not really in the search PATH,
! 5987: # but as the default location of the library.
! 5988: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5989: ;;
! 5990: esac
! 5991: fi
! 5992: ;;
! 5993:
! 5994: irix5* | irix6* | nonstopux*)
! 5995: if test "$GCC" = yes; then
! 5996: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 5997: else
! 5998: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 5999: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
! 6000: fi
! 6001: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 6002: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 6003: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 6004: ;;
! 6005:
! 6006: netbsd*)
! 6007: if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
! 6008: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
! 6009: else
! 6010: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
! 6011: fi
! 6012: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 6013: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 6014: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6015: ;;
! 6016:
! 6017: newsos6)
! 6018: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6019: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 6020: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 6021: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 6022: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6023: ;;
! 6024:
! 6025: openbsd*)
! 6026: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 6027: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6028: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
! 6029: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
! 6030: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
! 6031: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 6032: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 6033: else
! 6034: case $host_os in
! 6035: openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
! 6036: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
! 6037: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 6038: ;;
! 6039: *)
! 6040: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
! 6041: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 6042: ;;
! 6043: esac
! 6044: fi
! 6045: ;;
! 6046:
! 6047: os2*)
! 6048: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 6049: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 6050: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 6051: _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
! 6052: _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
! 6053: ;;
! 6054:
! 6055: osf3*)
! 6056: if test "$GCC" = yes; then
! 6057: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 6058: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 6059: else
! 6060: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
! 6061: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 6062: fi
! 6063: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 6064: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 6065: ;;
! 6066:
! 6067: osf4* | osf5*) # as osf3* with the addition of -msym flag
! 6068: if test "$GCC" = yes; then
! 6069: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 6070: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 6071: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 6072: else
! 6073: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
! 6074: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 6075: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
! 6076: $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
! 6077:
! 6078: # Both c and cxx compiler support -rpath directly
! 6079: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
! 6080: fi
! 6081: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 6082: ;;
! 6083:
! 6084: solaris*)
! 6085: _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
! 6086: if test "$GCC" = yes; then
! 6087: wlarc='${wl}'
! 6088: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6089: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 6090: $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
! 6091: else
! 6092: wlarc=''
! 6093: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6094: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 6095: $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
! 6096: fi
! 6097: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 6098: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6099: case $host_os in
! 6100: solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
! 6101: *)
! 6102: # The compiler driver will combine linker options so we
! 6103: # cannot just pass the convience library names through
! 6104: # without $wl, iff we do not link with $LD.
! 6105: # Luckily, gcc supports the same syntax we need for Sun Studio.
! 6106: # Supported since Solaris 2.6 (maybe 2.5.1?)
! 6107: case $wlarc in
! 6108: '')
! 6109: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
! 6110: *)
! 6111: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
! 6112: esac ;;
! 6113: esac
! 6114: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 6115: ;;
! 6116:
! 6117: sunos4*)
! 6118: if test "x$host_vendor" = xsequent; then
! 6119: # Use $CC to link under sequent, because it throws in some extra .o
! 6120: # files that make .init and .fini sections work.
! 6121: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
! 6122: else
! 6123: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
! 6124: fi
! 6125: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 6126: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 6127: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 6128: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6129: ;;
! 6130:
! 6131: sysv4)
! 6132: case $host_vendor in
! 6133: sni)
! 6134: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6135: _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
! 6136: ;;
! 6137: siemens)
! 6138: ## LD is ld it makes a PLAMLIB
! 6139: ## CC just makes a GrossModule.
! 6140: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
! 6141: _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
! 6142: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 6143: ;;
! 6144: motorola)
! 6145: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6146: _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
! 6147: ;;
! 6148: esac
! 6149: runpath_var='LD_RUN_PATH'
! 6150: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6151: ;;
! 6152:
! 6153: sysv4.3*)
! 6154: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6155: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6156: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
! 6157: ;;
! 6158:
! 6159: sysv4*MP*)
! 6160: if test -d /usr/nec; then
! 6161: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6162: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6163: runpath_var=LD_RUN_PATH
! 6164: hardcode_runpath_var=yes
! 6165: _LT_AC_TAGVAR(ld_shlibs, $1)=yes
! 6166: fi
! 6167: ;;
! 6168:
! 6169: sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
! 6170: _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
! 6171: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 6172: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6173: runpath_var='LD_RUN_PATH'
! 6174:
! 6175: if test "$GCC" = yes; then
! 6176: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6177: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6178: else
! 6179: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6180: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6181: fi
! 6182: ;;
! 6183:
! 6184: sysv5* | sco3.2v5* | sco5v6*)
! 6185: # Note: We can NOT use -z defs as we might desire, because we do not
! 6186: # link with -lc, and that would cause any symbols used from libc to
! 6187: # always be unresolved, which means just about no library would
! 6188: # ever link correctly. If we're not using GNU ld we use -z text
! 6189: # though, which does catch some bad symbols but isn't as heavy-handed
! 6190: # as -z defs.
! 6191: _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
! 6192: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
! 6193: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 6194: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6195: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
! 6196: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
! 6197: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 6198: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
! 6199: runpath_var='LD_RUN_PATH'
! 6200:
! 6201: if test "$GCC" = yes; then
! 6202: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6203: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6204: else
! 6205: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6206: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6207: fi
! 6208: ;;
! 6209:
! 6210: uts4*)
! 6211: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6212: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 6213: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6214: ;;
! 6215:
! 6216: *)
! 6217: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 6218: ;;
! 6219: esac
! 6220: fi
! 6221: ])
! 6222: AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
! 6223: test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
! 6224:
! 6225: #
! 6226: # Do we need to explicitly link libc?
! 6227: #
! 6228: case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
! 6229: x|xyes)
! 6230: # Assume -lc should be added
! 6231: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
! 6232:
! 6233: if test "$enable_shared" = yes && test "$GCC" = yes; then
! 6234: case $_LT_AC_TAGVAR(archive_cmds, $1) in
! 6235: *'~'*)
! 6236: # FIXME: we may have to deal with multi-command sequences.
! 6237: ;;
! 6238: '$CC '*)
! 6239: # Test whether the compiler implicitly links with -lc since on some
! 6240: # systems, -lgcc has to come before -lc. If gcc already passes -lc
! 6241: # to ld, don't add -lc before -lgcc.
! 6242: AC_MSG_CHECKING([whether -lc should be explicitly linked in])
! 6243: $rm conftest*
! 6244: printf "$lt_simple_compile_test_code" > conftest.$ac_ext
! 6245:
! 6246: if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
! 6247: soname=conftest
! 6248: lib=conftest
! 6249: libobjs=conftest.$ac_objext
! 6250: deplibs=
! 6251: wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
! 6252: pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
! 6253: compiler_flags=-v
! 6254: linker_flags=-v
! 6255: verstring=
! 6256: output_objdir=.
! 6257: libname=conftest
! 6258: lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
! 6259: _LT_AC_TAGVAR(allow_undefined_flag, $1)=
! 6260: if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
! 6261: then
! 6262: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 6263: else
! 6264: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
! 6265: fi
! 6266: _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
! 6267: else
! 6268: cat conftest.err 1>&5
! 6269: fi
! 6270: $rm conftest*
! 6271: AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
! 6272: ;;
! 6273: esac
! 6274: fi
! 6275: ;;
! 6276: esac
! 6277: ])# AC_LIBTOOL_PROG_LD_SHLIBS
! 6278:
! 6279:
! 6280: # _LT_AC_FILE_LTDLL_C
! 6281: # -------------------
! 6282: # Be careful that the start marker always follows a newline.
! 6283: AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
! 6284: # /* ltdll.c starts here */
! 6285: # #define WIN32_LEAN_AND_MEAN
! 6286: # #include <windows.h>
! 6287: # #undef WIN32_LEAN_AND_MEAN
! 6288: # #include <stdio.h>
! 6289: #
! 6290: # #ifndef __CYGWIN__
! 6291: # # ifdef __CYGWIN32__
! 6292: # # define __CYGWIN__ __CYGWIN32__
! 6293: # # endif
! 6294: # #endif
! 6295: #
! 6296: # #ifdef __cplusplus
! 6297: # extern "C" {
! 6298: # #endif
! 6299: # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
! 6300: # #ifdef __cplusplus
! 6301: # }
! 6302: # #endif
! 6303: #
! 6304: # #ifdef __CYGWIN__
! 6305: # #include <cygwin/cygwin_dll.h>
! 6306: # DECLARE_CYGWIN_DLL( DllMain );
! 6307: # #endif
! 6308: # HINSTANCE __hDllInstance_base;
! 6309: #
! 6310: # BOOL APIENTRY
! 6311: # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
! 6312: # {
! 6313: # __hDllInstance_base = hInst;
! 6314: # return TRUE;
! 6315: # }
! 6316: # /* ltdll.c ends here */
! 6317: ])# _LT_AC_FILE_LTDLL_C
! 6318:
! 6319:
! 6320: # _LT_AC_TAGVAR(VARNAME, [TAGNAME])
! 6321: # ---------------------------------
! 6322: AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
! 6323:
! 6324:
! 6325: # old names
! 6326: AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
! 6327: AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
! 6328: AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
! 6329: AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
! 6330: AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
! 6331: AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
! 6332: AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
! 6333:
! 6334: # This is just to silence aclocal about the macro not being used
! 6335: ifelse([AC_DISABLE_FAST_INSTALL])
! 6336:
! 6337: AC_DEFUN([LT_AC_PROG_GCJ],
! 6338: [AC_CHECK_TOOL(GCJ, gcj, no)
! 6339: test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
! 6340: AC_SUBST(GCJFLAGS)
! 6341: ])
! 6342:
! 6343: AC_DEFUN([LT_AC_PROG_RC],
! 6344: [AC_CHECK_TOOL(RC, windres, no)
! 6345: ])
! 6346:
! 6347: # NOTE: This macro has been submitted for inclusion into #
! 6348: # GNU Autoconf as AC_PROG_SED. When it is available in #
! 6349: # a released version of Autoconf we should remove this #
! 6350: # macro and use it instead. #
! 6351: # LT_AC_PROG_SED
! 6352: # --------------
! 6353: # Check for a fully-functional sed program, that truncates
! 6354: # as few characters as possible. Prefer GNU sed if found.
! 6355: AC_DEFUN([LT_AC_PROG_SED],
! 6356: [AC_MSG_CHECKING([for a sed that does not truncate output])
! 6357: AC_CACHE_VAL(lt_cv_path_SED,
! 6358: [# Loop through the user's path and test for sed and gsed.
! 6359: # Then use that list of sed's as ones to test for truncation.
! 6360: as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
! 6361: for as_dir in $PATH
! 6362: do
! 6363: IFS=$as_save_IFS
! 6364: test -z "$as_dir" && as_dir=.
! 6365: for lt_ac_prog in sed gsed; do
! 6366: for ac_exec_ext in '' $ac_executable_extensions; do
! 6367: if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
! 6368: lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
! 6369: fi
! 6370: done
! 6371: done
! 6372: done
! 6373: lt_ac_max=0
! 6374: lt_ac_count=0
! 6375: # Add /usr/xpg4/bin/sed as it is typically found on Solaris
! 6376: # along with /bin/sed that truncates output.
! 6377: for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
! 6378: test ! -f $lt_ac_sed && continue
! 6379: cat /dev/null > conftest.in
! 6380: lt_ac_count=0
! 6381: echo $ECHO_N "0123456789$ECHO_C" >conftest.in
! 6382: # Check for GNU sed and select it if it is found.
! 6383: if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
! 6384: lt_cv_path_SED=$lt_ac_sed
! 6385: break
! 6386: fi
! 6387: while true; do
! 6388: cat conftest.in conftest.in >conftest.tmp
! 6389: mv conftest.tmp conftest.in
! 6390: cp conftest.in conftest.nl
! 6391: echo >>conftest.nl
! 6392: $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
! 6393: cmp -s conftest.out conftest.nl || break
! 6394: # 10000 chars as input seems more than enough
! 6395: test $lt_ac_count -gt 10 && break
! 6396: lt_ac_count=`expr $lt_ac_count + 1`
! 6397: if test $lt_ac_count -gt $lt_ac_max; then
! 6398: lt_ac_max=$lt_ac_count
! 6399: lt_cv_path_SED=$lt_ac_sed
! 6400: fi
! 6401: done
! 6402: done
! 6403: ])
! 6404: SED=$lt_cv_path_SED
! 6405: AC_MSG_RESULT([$SED])
! 6406: ])
! 6407:
! 6408: # Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
! 6409: #
! 6410: # This file is free software; the Free Software Foundation
! 6411: # gives unlimited permission to copy and/or distribute it,
! 6412: # with or without modifications, as long as this notice is preserved.
! 6413:
! 6414: # AM_AUTOMAKE_VERSION(VERSION)
! 6415: # ----------------------------
! 6416: # Automake X.Y traces this macro to ensure aclocal.m4 has been
! 6417: # generated from the m4 files accompanying Automake X.Y.
! 6418: AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
! 6419:
! 6420: # AM_SET_CURRENT_AUTOMAKE_VERSION
! 6421: # -------------------------------
! 6422: # Call AM_AUTOMAKE_VERSION so it can be traced.
! 6423: # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
! 6424: AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
! 6425: [AM_AUTOMAKE_VERSION([1.9.6])])
! 6426:
! 6427: # AM_AUX_DIR_EXPAND -*- Autoconf -*-
! 6428:
! 6429: # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
! 6430: #
! 6431: # This file is free software; the Free Software Foundation
! 6432: # gives unlimited permission to copy and/or distribute it,
! 6433: # with or without modifications, as long as this notice is preserved.
! 6434:
! 6435: # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
! 6436: # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
! 6437: # `$srcdir', `$srcdir/..', or `$srcdir/../..'.
! 6438: #
! 6439: # Of course, Automake must honor this variable whenever it calls a
! 6440: # tool from the auxiliary directory. The problem is that $srcdir (and
! 6441: # therefore $ac_aux_dir as well) can be either absolute or relative,
! 6442: # depending on how configure is run. This is pretty annoying, since
! 6443: # it makes $ac_aux_dir quite unusable in subdirectories: in the top
! 6444: # source directory, any form will work fine, but in subdirectories a
! 6445: # relative path needs to be adjusted first.
! 6446: #
! 6447: # $ac_aux_dir/missing
! 6448: # fails when called from a subdirectory if $ac_aux_dir is relative
! 6449: # $top_srcdir/$ac_aux_dir/missing
! 6450: # fails if $ac_aux_dir is absolute,
! 6451: # fails when called from a subdirectory in a VPATH build with
! 6452: # a relative $ac_aux_dir
! 6453: #
! 6454: # The reason of the latter failure is that $top_srcdir and $ac_aux_dir
! 6455: # are both prefixed by $srcdir. In an in-source build this is usually
! 6456: # harmless because $srcdir is `.', but things will broke when you
! 6457: # start a VPATH build or use an absolute $srcdir.
! 6458: #
! 6459: # So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
! 6460: # iff we strip the leading $srcdir from $ac_aux_dir. That would be:
! 6461: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
! 6462: # and then we would define $MISSING as
! 6463: # MISSING="\${SHELL} $am_aux_dir/missing"
! 6464: # This will work as long as MISSING is not called from configure, because
! 6465: # unfortunately $(top_srcdir) has no meaning in configure.
! 6466: # However there are other variables, like CC, which are often used in
! 6467: # configure, and could therefore not use this "fixed" $ac_aux_dir.
! 6468: #
! 6469: # Another solution, used here, is to always expand $ac_aux_dir to an
! 6470: # absolute PATH. The drawback is that using absolute paths prevent a
! 6471: # configured tree to be moved without reconfiguration.
! 6472:
! 6473: AC_DEFUN([AM_AUX_DIR_EXPAND],
! 6474: [dnl Rely on autoconf to set up CDPATH properly.
! 6475: AC_PREREQ([2.50])dnl
! 6476: # expand $ac_aux_dir to an absolute path
! 6477: am_aux_dir=`cd $ac_aux_dir && pwd`
! 6478: ])
! 6479:
! 6480: # AM_CONDITIONAL -*- Autoconf -*-
! 6481:
! 6482: # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
! 6483: # Free Software Foundation, Inc.
! 6484: #
! 6485: # This file is free software; the Free Software Foundation
! 6486: # gives unlimited permission to copy and/or distribute it,
! 6487: # with or without modifications, as long as this notice is preserved.
! 6488:
! 6489: # serial 7
! 6490:
! 6491: # AM_CONDITIONAL(NAME, SHELL-CONDITION)
! 6492: # -------------------------------------
! 6493: # Define a conditional.
! 6494: AC_DEFUN([AM_CONDITIONAL],
! 6495: [AC_PREREQ(2.52)dnl
! 6496: ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
! 6497: [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
! 6498: AC_SUBST([$1_TRUE])
! 6499: AC_SUBST([$1_FALSE])
! 6500: if $2; then
! 6501: $1_TRUE=
! 6502: $1_FALSE='#'
! 6503: else
! 6504: $1_TRUE='#'
! 6505: $1_FALSE=
! 6506: fi
! 6507: AC_CONFIG_COMMANDS_PRE(
! 6508: [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
! 6509: AC_MSG_ERROR([[conditional "$1" was never defined.
! 6510: Usually this means the macro was only invoked conditionally.]])
! 6511: fi])])
! 6512:
! 6513:
! 6514: # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
! 6515: # Free Software Foundation, Inc.
! 6516: #
! 6517: # This file is free software; the Free Software Foundation
! 6518: # gives unlimited permission to copy and/or distribute it,
! 6519: # with or without modifications, as long as this notice is preserved.
! 6520:
! 6521: # serial 8
! 6522:
! 6523: # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
! 6524: # written in clear, in which case automake, when reading aclocal.m4,
! 6525: # will think it sees a *use*, and therefore will trigger all it's
! 6526: # C support machinery. Also note that it means that autoscan, seeing
! 6527: # CC etc. in the Makefile, will ask for an AC_PROG_CC use...
! 6528:
! 6529:
! 6530: # _AM_DEPENDENCIES(NAME)
! 6531: # ----------------------
! 6532: # See how the compiler implements dependency checking.
! 6533: # NAME is "CC", "CXX", "GCJ", or "OBJC".
! 6534: # We try a few techniques and use that to set a single cache variable.
! 6535: #
! 6536: # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
! 6537: # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
! 6538: # dependency, and given that the user is not expected to run this macro,
! 6539: # just rely on AC_PROG_CC.
! 6540: AC_DEFUN([_AM_DEPENDENCIES],
! 6541: [AC_REQUIRE([AM_SET_DEPDIR])dnl
! 6542: AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
! 6543: AC_REQUIRE([AM_MAKE_INCLUDE])dnl
! 6544: AC_REQUIRE([AM_DEP_TRACK])dnl
! 6545:
! 6546: ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
! 6547: [$1], CXX, [depcc="$CXX" am_compiler_list=],
! 6548: [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
! 6549: [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
! 6550: [depcc="$$1" am_compiler_list=])
! 6551:
! 6552: AC_CACHE_CHECK([dependency style of $depcc],
! 6553: [am_cv_$1_dependencies_compiler_type],
! 6554: [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
! 6555: # We make a subdir and do the tests there. Otherwise we can end up
! 6556: # making bogus files that we don't know about and never remove. For
! 6557: # instance it was reported that on HP-UX the gcc test will end up
! 6558: # making a dummy file named `D' -- because `-MD' means `put the output
! 6559: # in D'.
! 6560: mkdir conftest.dir
! 6561: # Copy depcomp to subdir because otherwise we won't find it if we're
! 6562: # using a relative directory.
! 6563: cp "$am_depcomp" conftest.dir
! 6564: cd conftest.dir
! 6565: # We will build objects and dependencies in a subdirectory because
! 6566: # it helps to detect inapplicable dependency modes. For instance
! 6567: # both Tru64's cc and ICC support -MD to output dependencies as a
! 6568: # side effect of compilation, but ICC will put the dependencies in
! 6569: # the current directory while Tru64 will put them in the object
! 6570: # directory.
! 6571: mkdir sub
! 6572:
! 6573: am_cv_$1_dependencies_compiler_type=none
! 6574: if test "$am_compiler_list" = ""; then
! 6575: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
! 6576: fi
! 6577: for depmode in $am_compiler_list; do
! 6578: # Setup a source with many dependencies, because some compilers
! 6579: # like to wrap large dependency lists on column 80 (with \), and
! 6580: # we should not choose a depcomp mode which is confused by this.
! 6581: #
! 6582: # We need to recreate these files for each test, as the compiler may
! 6583: # overwrite some of them when testing with obscure command lines.
! 6584: # This happens at least with the AIX C compiler.
! 6585: : > sub/conftest.c
! 6586: for i in 1 2 3 4 5 6; do
! 6587: echo '#include "conftst'$i'.h"' >> sub/conftest.c
! 6588: # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
! 6589: # Solaris 8's {/usr,}/bin/sh.
! 6590: touch sub/conftst$i.h
! 6591: done
! 6592: echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
! 6593:
! 6594: case $depmode in
! 6595: nosideeffect)
! 6596: # after this tag, mechanisms are not by side-effect, so they'll
! 6597: # only be used when explicitly requested
! 6598: if test "x$enable_dependency_tracking" = xyes; then
! 6599: continue
! 6600: else
! 6601: break
! 6602: fi
! 6603: ;;
! 6604: none) break ;;
! 6605: esac
! 6606: # We check with `-c' and `-o' for the sake of the "dashmstdout"
! 6607: # mode. It turns out that the SunPro C++ compiler does not properly
! 6608: # handle `-M -o', and we need to detect this.
! 6609: if depmode=$depmode \
! 6610: source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
! 6611: depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
! 6612: $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
! 6613: >/dev/null 2>conftest.err &&
! 6614: grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
! 6615: grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
! 6616: ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
! 6617: # icc doesn't choke on unknown options, it will just issue warnings
! 6618: # or remarks (even with -Werror). So we grep stderr for any message
! 6619: # that says an option was ignored or not supported.
! 6620: # When given -MP, icc 7.0 and 7.1 complain thusly:
! 6621: # icc: Command line warning: ignoring option '-M'; no argument required
! 6622: # The diagnosis changed in icc 8.0:
! 6623: # icc: Command line remark: option '-MP' not supported
! 6624: if (grep 'ignoring option' conftest.err ||
! 6625: grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
! 6626: am_cv_$1_dependencies_compiler_type=$depmode
! 6627: break
! 6628: fi
! 6629: fi
! 6630: done
! 6631:
! 6632: cd ..
! 6633: rm -rf conftest.dir
! 6634: else
! 6635: am_cv_$1_dependencies_compiler_type=none
! 6636: fi
! 6637: ])
! 6638: AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
! 6639: AM_CONDITIONAL([am__fastdep$1], [
! 6640: test "x$enable_dependency_tracking" != xno \
! 6641: && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
! 6642: ])
! 6643:
! 6644:
! 6645: # AM_SET_DEPDIR
! 6646: # -------------
! 6647: # Choose a directory name for dependency files.
! 6648: # This macro is AC_REQUIREd in _AM_DEPENDENCIES
! 6649: AC_DEFUN([AM_SET_DEPDIR],
! 6650: [AC_REQUIRE([AM_SET_LEADING_DOT])dnl
! 6651: AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
! 6652: ])
! 6653:
! 6654:
! 6655: # AM_DEP_TRACK
! 6656: # ------------
! 6657: AC_DEFUN([AM_DEP_TRACK],
! 6658: [AC_ARG_ENABLE(dependency-tracking,
! 6659: [ --disable-dependency-tracking speeds up one-time build
! 6660: --enable-dependency-tracking do not reject slow dependency extractors])
! 6661: if test "x$enable_dependency_tracking" != xno; then
! 6662: am_depcomp="$ac_aux_dir/depcomp"
! 6663: AMDEPBACKSLASH='\'
! 6664: fi
! 6665: AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
! 6666: AC_SUBST([AMDEPBACKSLASH])
! 6667: ])
! 6668:
! 6669: # Generate code to set up dependency tracking. -*- Autoconf -*-
! 6670:
! 6671: # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
! 6672: # Free Software Foundation, Inc.
! 6673: #
! 6674: # This file is free software; the Free Software Foundation
! 6675: # gives unlimited permission to copy and/or distribute it,
! 6676: # with or without modifications, as long as this notice is preserved.
! 6677:
! 6678: #serial 3
! 6679:
! 6680: # _AM_OUTPUT_DEPENDENCY_COMMANDS
! 6681: # ------------------------------
! 6682: AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
! 6683: [for mf in $CONFIG_FILES; do
! 6684: # Strip MF so we end up with the name of the file.
! 6685: mf=`echo "$mf" | sed -e 's/:.*$//'`
! 6686: # Check whether this is an Automake generated Makefile or not.
! 6687: # We used to match only the files named `Makefile.in', but
! 6688: # some people rename them; so instead we look at the file content.
! 6689: # Grep'ing the first line is not enough: some people post-process
! 6690: # each Makefile.in and add a new line on top of each file to say so.
! 6691: # So let's grep whole file.
! 6692: if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
! 6693: dirpart=`AS_DIRNAME("$mf")`
! 6694: else
! 6695: continue
! 6696: fi
! 6697: # Extract the definition of DEPDIR, am__include, and am__quote
! 6698: # from the Makefile without running `make'.
! 6699: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
! 6700: test -z "$DEPDIR" && continue
! 6701: am__include=`sed -n 's/^am__include = //p' < "$mf"`
! 6702: test -z "am__include" && continue
! 6703: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
! 6704: # When using ansi2knr, U may be empty or an underscore; expand it
! 6705: U=`sed -n 's/^U = //p' < "$mf"`
! 6706: # Find all dependency output files, they are included files with
! 6707: # $(DEPDIR) in their names. We invoke sed twice because it is the
! 6708: # simplest approach to changing $(DEPDIR) to its actual value in the
! 6709: # expansion.
! 6710: for file in `sed -n "
! 6711: s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
! 6712: sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
! 6713: # Make sure the directory exists.
! 6714: test -f "$dirpart/$file" && continue
! 6715: fdir=`AS_DIRNAME(["$file"])`
! 6716: AS_MKDIR_P([$dirpart/$fdir])
! 6717: # echo "creating $dirpart/$file"
! 6718: echo '# dummy' > "$dirpart/$file"
! 6719: done
! 6720: done
! 6721: ])# _AM_OUTPUT_DEPENDENCY_COMMANDS
! 6722:
! 6723:
! 6724: # AM_OUTPUT_DEPENDENCY_COMMANDS
! 6725: # -----------------------------
! 6726: # This macro should only be invoked once -- use via AC_REQUIRE.
! 6727: #
! 6728: # This code is only required when automatic dependency tracking
! 6729: # is enabled. FIXME. This creates each `.P' file that we will
! 6730: # need in order to bootstrap the dependency handling code.
! 6731: AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
! 6732: [AC_CONFIG_COMMANDS([depfiles],
! 6733: [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
! 6734: [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
! 6735: ])
! 6736:
! 6737: # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
! 6738: # Free Software Foundation, Inc.
! 6739: #
! 6740: # This file is free software; the Free Software Foundation
! 6741: # gives unlimited permission to copy and/or distribute it,
! 6742: # with or without modifications, as long as this notice is preserved.
! 6743:
! 6744: # serial 8
! 6745:
! 6746: # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
! 6747: AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
! 6748:
! 6749: # Do all the work for Automake. -*- Autoconf -*-
! 6750:
! 6751: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
! 6752: # Free Software Foundation, Inc.
! 6753: #
! 6754: # This file is free software; the Free Software Foundation
! 6755: # gives unlimited permission to copy and/or distribute it,
! 6756: # with or without modifications, as long as this notice is preserved.
! 6757:
! 6758: # serial 12
! 6759:
! 6760: # This macro actually does too much. Some checks are only needed if
! 6761: # your package does certain things. But this isn't really a big deal.
! 6762:
! 6763: # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
! 6764: # AM_INIT_AUTOMAKE([OPTIONS])
! 6765: # -----------------------------------------------
! 6766: # The call with PACKAGE and VERSION arguments is the old style
! 6767: # call (pre autoconf-2.50), which is being phased out. PACKAGE
! 6768: # and VERSION should now be passed to AC_INIT and removed from
! 6769: # the call to AM_INIT_AUTOMAKE.
! 6770: # We support both call styles for the transition. After
! 6771: # the next Automake release, Autoconf can make the AC_INIT
! 6772: # arguments mandatory, and then we can depend on a new Autoconf
! 6773: # release and drop the old call support.
! 6774: AC_DEFUN([AM_INIT_AUTOMAKE],
! 6775: [AC_PREREQ([2.58])dnl
! 6776: dnl Autoconf wants to disallow AM_ names. We explicitly allow
! 6777: dnl the ones we care about.
! 6778: m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
! 6779: AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
! 6780: AC_REQUIRE([AC_PROG_INSTALL])dnl
! 6781: # test to see if srcdir already configured
! 6782: if test "`cd $srcdir && pwd`" != "`pwd`" &&
! 6783: test -f $srcdir/config.status; then
! 6784: AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
! 6785: fi
! 6786:
! 6787: # test whether we have cygpath
! 6788: if test -z "$CYGPATH_W"; then
! 6789: if (cygpath --version) >/dev/null 2>/dev/null; then
! 6790: CYGPATH_W='cygpath -w'
! 6791: else
! 6792: CYGPATH_W=echo
! 6793: fi
! 6794: fi
! 6795: AC_SUBST([CYGPATH_W])
! 6796:
! 6797: # Define the identity of the package.
! 6798: dnl Distinguish between old-style and new-style calls.
! 6799: m4_ifval([$2],
! 6800: [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
! 6801: AC_SUBST([PACKAGE], [$1])dnl
! 6802: AC_SUBST([VERSION], [$2])],
! 6803: [_AM_SET_OPTIONS([$1])dnl
! 6804: AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
! 6805: AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
! 6806:
! 6807: _AM_IF_OPTION([no-define],,
! 6808: [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
! 6809: AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
! 6810:
! 6811: # Some tools Automake needs.
! 6812: AC_REQUIRE([AM_SANITY_CHECK])dnl
! 6813: AC_REQUIRE([AC_ARG_PROGRAM])dnl
! 6814: AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
! 6815: AM_MISSING_PROG(AUTOCONF, autoconf)
! 6816: AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
! 6817: AM_MISSING_PROG(AUTOHEADER, autoheader)
! 6818: AM_MISSING_PROG(MAKEINFO, makeinfo)
! 6819: AM_PROG_INSTALL_SH
! 6820: AM_PROG_INSTALL_STRIP
! 6821: AC_REQUIRE([AM_PROG_MKDIR_P])dnl
! 6822: # We need awk for the "check" target. The system "awk" is bad on
! 6823: # some platforms.
! 6824: AC_REQUIRE([AC_PROG_AWK])dnl
! 6825: AC_REQUIRE([AC_PROG_MAKE_SET])dnl
! 6826: AC_REQUIRE([AM_SET_LEADING_DOT])dnl
! 6827: _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
! 6828: [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
! 6829: [_AM_PROG_TAR([v7])])])
! 6830: _AM_IF_OPTION([no-dependencies],,
! 6831: [AC_PROVIDE_IFELSE([AC_PROG_CC],
! 6832: [_AM_DEPENDENCIES(CC)],
! 6833: [define([AC_PROG_CC],
! 6834: defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
! 6835: AC_PROVIDE_IFELSE([AC_PROG_CXX],
! 6836: [_AM_DEPENDENCIES(CXX)],
! 6837: [define([AC_PROG_CXX],
! 6838: defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
! 6839: ])
! 6840: ])
! 6841:
! 6842:
! 6843: # When config.status generates a header, we must update the stamp-h file.
! 6844: # This file resides in the same directory as the config header
! 6845: # that is generated. The stamp files are numbered to have different names.
! 6846:
! 6847: # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
! 6848: # loop where config.status creates the headers, so we can generate
! 6849: # our stamp files there.
! 6850: AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
! 6851: [# Compute $1's index in $config_headers.
! 6852: _am_stamp_count=1
! 6853: for _am_header in $config_headers :; do
! 6854: case $_am_header in
! 6855: $1 | $1:* )
! 6856: break ;;
! 6857: * )
! 6858: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
! 6859: esac
! 6860: done
! 6861: echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
! 6862:
! 6863: # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
! 6864: #
! 6865: # This file is free software; the Free Software Foundation
! 6866: # gives unlimited permission to copy and/or distribute it,
! 6867: # with or without modifications, as long as this notice is preserved.
! 6868:
! 6869: # AM_PROG_INSTALL_SH
! 6870: # ------------------
! 6871: # Define $install_sh.
! 6872: AC_DEFUN([AM_PROG_INSTALL_SH],
! 6873: [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
! 6874: install_sh=${install_sh-"$am_aux_dir/install-sh"}
! 6875: AC_SUBST(install_sh)])
! 6876:
! 6877: # Copyright (C) 2003, 2005 Free Software Foundation, Inc.
! 6878: #
! 6879: # This file is free software; the Free Software Foundation
! 6880: # gives unlimited permission to copy and/or distribute it,
! 6881: # with or without modifications, as long as this notice is preserved.
! 6882:
! 6883: # serial 2
! 6884:
! 6885: # Check whether the underlying file-system supports filenames
! 6886: # with a leading dot. For instance MS-DOS doesn't.
! 6887: AC_DEFUN([AM_SET_LEADING_DOT],
! 6888: [rm -rf .tst 2>/dev/null
! 6889: mkdir .tst 2>/dev/null
! 6890: if test -d .tst; then
! 6891: am__leading_dot=.
! 6892: else
! 6893: am__leading_dot=_
! 6894: fi
! 6895: rmdir .tst 2>/dev/null
! 6896: AC_SUBST([am__leading_dot])])
! 6897:
! 6898: # Check to see how 'make' treats includes. -*- Autoconf -*-
! 6899:
! 6900: # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
! 6901: #
! 6902: # This file is free software; the Free Software Foundation
! 6903: # gives unlimited permission to copy and/or distribute it,
! 6904: # with or without modifications, as long as this notice is preserved.
! 6905:
! 6906: # serial 3
! 6907:
! 6908: # AM_MAKE_INCLUDE()
! 6909: # -----------------
! 6910: # Check to see how make treats includes.
! 6911: AC_DEFUN([AM_MAKE_INCLUDE],
! 6912: [am_make=${MAKE-make}
! 6913: cat > confinc << 'END'
! 6914: am__doit:
! 6915: @echo done
! 6916: .PHONY: am__doit
! 6917: END
! 6918: # If we don't find an include directive, just comment out the code.
! 6919: AC_MSG_CHECKING([for style of include used by $am_make])
! 6920: am__include="#"
! 6921: am__quote=
! 6922: _am_result=none
! 6923: # First try GNU make style include.
! 6924: echo "include confinc" > confmf
! 6925: # We grep out `Entering directory' and `Leaving directory'
! 6926: # messages which can occur if `w' ends up in MAKEFLAGS.
! 6927: # In particular we don't look at `^make:' because GNU make might
! 6928: # be invoked under some other name (usually "gmake"), in which
! 6929: # case it prints its new name instead of `make'.
! 6930: if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
! 6931: am__include=include
! 6932: am__quote=
! 6933: _am_result=GNU
! 6934: fi
! 6935: # Now try BSD make style include.
! 6936: if test "$am__include" = "#"; then
! 6937: echo '.include "confinc"' > confmf
! 6938: if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
! 6939: am__include=.include
! 6940: am__quote="\""
! 6941: _am_result=BSD
! 6942: fi
! 6943: fi
! 6944: AC_SUBST([am__include])
! 6945: AC_SUBST([am__quote])
! 6946: AC_MSG_RESULT([$_am_result])
! 6947: rm -f confinc confmf
! 6948: ])
! 6949:
! 6950: # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
! 6951:
! 6952: # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
! 6953: # Free Software Foundation, Inc.
! 6954: #
! 6955: # This file is free software; the Free Software Foundation
! 6956: # gives unlimited permission to copy and/or distribute it,
! 6957: # with or without modifications, as long as this notice is preserved.
! 6958:
! 6959: # serial 4
! 6960:
! 6961: # AM_MISSING_PROG(NAME, PROGRAM)
! 6962: # ------------------------------
! 6963: AC_DEFUN([AM_MISSING_PROG],
! 6964: [AC_REQUIRE([AM_MISSING_HAS_RUN])
! 6965: $1=${$1-"${am_missing_run}$2"}
! 6966: AC_SUBST($1)])
! 6967:
! 6968:
! 6969: # AM_MISSING_HAS_RUN
! 6970: # ------------------
! 6971: # Define MISSING if not defined so far and test if it supports --run.
! 6972: # If it does, set am_missing_run to use it, otherwise, to nothing.
! 6973: AC_DEFUN([AM_MISSING_HAS_RUN],
! 6974: [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
! 6975: test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
! 6976: # Use eval to expand $SHELL
! 6977: if eval "$MISSING --run true"; then
! 6978: am_missing_run="$MISSING --run "
! 6979: else
! 6980: am_missing_run=
! 6981: AC_MSG_WARN([`missing' script is too old or missing])
! 6982: fi
! 6983: ])
! 6984:
! 6985: # Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
! 6986: #
! 6987: # This file is free software; the Free Software Foundation
! 6988: # gives unlimited permission to copy and/or distribute it,
! 6989: # with or without modifications, as long as this notice is preserved.
! 6990:
! 6991: # AM_PROG_MKDIR_P
! 6992: # ---------------
! 6993: # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
! 6994: #
! 6995: # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
! 6996: # created by `make install' are always world readable, even if the
! 6997: # installer happens to have an overly restrictive umask (e.g. 077).
! 6998: # This was a mistake. There are at least two reasons why we must not
! 6999: # use `-m 0755':
! 7000: # - it causes special bits like SGID to be ignored,
! 7001: # - it may be too restrictive (some setups expect 775 directories).
! 7002: #
! 7003: # Do not use -m 0755 and let people choose whatever they expect by
! 7004: # setting umask.
! 7005: #
! 7006: # We cannot accept any implementation of `mkdir' that recognizes `-p'.
! 7007: # Some implementations (such as Solaris 8's) are not thread-safe: if a
! 7008: # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
! 7009: # concurrently, both version can detect that a/ is missing, but only
! 7010: # one can create it and the other will error out. Consequently we
! 7011: # restrict ourselves to GNU make (using the --version option ensures
! 7012: # this.)
! 7013: AC_DEFUN([AM_PROG_MKDIR_P],
! 7014: [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
! 7015: # We used to keeping the `.' as first argument, in order to
! 7016: # allow $(mkdir_p) to be used without argument. As in
! 7017: # $(mkdir_p) $(somedir)
! 7018: # where $(somedir) is conditionally defined. However this is wrong
! 7019: # for two reasons:
! 7020: # 1. if the package is installed by a user who cannot write `.'
! 7021: # make install will fail,
! 7022: # 2. the above comment should most certainly read
! 7023: # $(mkdir_p) $(DESTDIR)$(somedir)
! 7024: # so it does not work when $(somedir) is undefined and
! 7025: # $(DESTDIR) is not.
! 7026: # To support the latter case, we have to write
! 7027: # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
! 7028: # so the `.' trick is pointless.
! 7029: mkdir_p='mkdir -p --'
! 7030: else
! 7031: # On NextStep and OpenStep, the `mkdir' command does not
! 7032: # recognize any option. It will interpret all options as
! 7033: # directories to create, and then abort because `.' already
! 7034: # exists.
! 7035: for d in ./-p ./--version;
! 7036: do
! 7037: test -d $d && rmdir $d
! 7038: done
! 7039: # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
! 7040: if test -f "$ac_aux_dir/mkinstalldirs"; then
! 7041: mkdir_p='$(mkinstalldirs)'
! 7042: else
! 7043: mkdir_p='$(install_sh) -d'
! 7044: fi
! 7045: fi
! 7046: AC_SUBST([mkdir_p])])
! 7047:
! 7048: # Helper functions for option handling. -*- Autoconf -*-
! 7049:
! 7050: # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
! 7051: #
! 7052: # This file is free software; the Free Software Foundation
! 7053: # gives unlimited permission to copy and/or distribute it,
! 7054: # with or without modifications, as long as this notice is preserved.
! 7055:
! 7056: # serial 3
! 7057:
! 7058: # _AM_MANGLE_OPTION(NAME)
! 7059: # -----------------------
! 7060: AC_DEFUN([_AM_MANGLE_OPTION],
! 7061: [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
! 7062:
! 7063: # _AM_SET_OPTION(NAME)
! 7064: # ------------------------------
! 7065: # Set option NAME. Presently that only means defining a flag for this option.
! 7066: AC_DEFUN([_AM_SET_OPTION],
! 7067: [m4_define(_AM_MANGLE_OPTION([$1]), 1)])
! 7068:
! 7069: # _AM_SET_OPTIONS(OPTIONS)
! 7070: # ----------------------------------
! 7071: # OPTIONS is a space-separated list of Automake options.
! 7072: AC_DEFUN([_AM_SET_OPTIONS],
! 7073: [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
! 7074:
! 7075: # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
! 7076: # -------------------------------------------
! 7077: # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
! 7078: AC_DEFUN([_AM_IF_OPTION],
! 7079: [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
! 7080:
! 7081: # Check to make sure that the build environment is sane. -*- Autoconf -*-
! 7082:
! 7083: # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
! 7084: # Free Software Foundation, Inc.
! 7085: #
! 7086: # This file is free software; the Free Software Foundation
! 7087: # gives unlimited permission to copy and/or distribute it,
! 7088: # with or without modifications, as long as this notice is preserved.
! 7089:
! 7090: # serial 4
! 7091:
! 7092: # AM_SANITY_CHECK
! 7093: # ---------------
! 7094: AC_DEFUN([AM_SANITY_CHECK],
! 7095: [AC_MSG_CHECKING([whether build environment is sane])
! 7096: # Just in case
! 7097: sleep 1
! 7098: echo timestamp > conftest.file
! 7099: # Do `set' in a subshell so we don't clobber the current shell's
! 7100: # arguments. Must try -L first in case configure is actually a
! 7101: # symlink; some systems play weird games with the mod time of symlinks
! 7102: # (eg FreeBSD returns the mod time of the symlink's containing
! 7103: # directory).
! 7104: if (
! 7105: set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
! 7106: if test "$[*]" = "X"; then
! 7107: # -L didn't work.
! 7108: set X `ls -t $srcdir/configure conftest.file`
! 7109: fi
! 7110: rm -f conftest.file
! 7111: if test "$[*]" != "X $srcdir/configure conftest.file" \
! 7112: && test "$[*]" != "X conftest.file $srcdir/configure"; then
! 7113:
! 7114: # If neither matched, then we have a broken ls. This can happen
! 7115: # if, for instance, CONFIG_SHELL is bash and it inherits a
! 7116: # broken ls alias from the environment. This has actually
! 7117: # happened. Such a system could not be considered "sane".
! 7118: AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
! 7119: alias in your environment])
! 7120: fi
! 7121:
! 7122: test "$[2]" = conftest.file
! 7123: )
! 7124: then
! 7125: # Ok.
! 7126: :
! 7127: else
! 7128: AC_MSG_ERROR([newly created file is older than distributed files!
! 7129: Check your system clock])
! 7130: fi
! 7131: AC_MSG_RESULT(yes)])
! 7132:
! 7133: # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
! 7134: #
! 7135: # This file is free software; the Free Software Foundation
! 7136: # gives unlimited permission to copy and/or distribute it,
! 7137: # with or without modifications, as long as this notice is preserved.
! 7138:
! 7139: # AM_PROG_INSTALL_STRIP
! 7140: # ---------------------
! 7141: # One issue with vendor `install' (even GNU) is that you can't
! 7142: # specify the program used to strip binaries. This is especially
! 7143: # annoying in cross-compiling environments, where the build's strip
! 7144: # is unlikely to handle the host's binaries.
! 7145: # Fortunately install-sh will honor a STRIPPROG variable, so we
! 7146: # always use install-sh in `make install-strip', and initialize
! 7147: # STRIPPROG with the value of the STRIP variable (set by the user).
! 7148: AC_DEFUN([AM_PROG_INSTALL_STRIP],
! 7149: [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
! 7150: # Installed binaries are usually stripped using `strip' when the user
! 7151: # run `make install-strip'. However `strip' might not be the right
! 7152: # tool to use in cross-compilation environments, therefore Automake
! 7153: # will honor the `STRIP' environment variable to overrule this program.
! 7154: dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
! 7155: if test "$cross_compiling" != no; then
! 7156: AC_CHECK_TOOL([STRIP], [strip], :)
! 7157: fi
! 7158: INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
! 7159: AC_SUBST([INSTALL_STRIP_PROGRAM])])
! 7160:
! 7161: # Check how to create a tarball. -*- Autoconf -*-
! 7162:
! 7163: # Copyright (C) 2004, 2005 Free Software Foundation, Inc.
! 7164: #
! 7165: # This file is free software; the Free Software Foundation
! 7166: # gives unlimited permission to copy and/or distribute it,
! 7167: # with or without modifications, as long as this notice is preserved.
! 7168:
! 7169: # serial 2
! 7170:
! 7171: # _AM_PROG_TAR(FORMAT)
! 7172: # --------------------
! 7173: # Check how to create a tarball in format FORMAT.
! 7174: # FORMAT should be one of `v7', `ustar', or `pax'.
! 7175: #
! 7176: # Substitute a variable $(am__tar) that is a command
! 7177: # writing to stdout a FORMAT-tarball containing the directory
! 7178: # $tardir.
! 7179: # tardir=directory && $(am__tar) > result.tar
! 7180: #
! 7181: # Substitute a variable $(am__untar) that extract such
! 7182: # a tarball read from stdin.
! 7183: # $(am__untar) < result.tar
! 7184: AC_DEFUN([_AM_PROG_TAR],
! 7185: [# Always define AMTAR for backward compatibility.
! 7186: AM_MISSING_PROG([AMTAR], [tar])
! 7187: m4_if([$1], [v7],
! 7188: [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
! 7189: [m4_case([$1], [ustar],, [pax],,
! 7190: [m4_fatal([Unknown tar format])])
! 7191: AC_MSG_CHECKING([how to create a $1 tar archive])
! 7192: # Loop over all known methods to create a tar archive until one works.
! 7193: _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
! 7194: _am_tools=${am_cv_prog_tar_$1-$_am_tools}
! 7195: # Do not fold the above two line into one, because Tru64 sh and
! 7196: # Solaris sh will not grok spaces in the rhs of `-'.
! 7197: for _am_tool in $_am_tools
! 7198: do
! 7199: case $_am_tool in
! 7200: gnutar)
! 7201: for _am_tar in tar gnutar gtar;
! 7202: do
! 7203: AM_RUN_LOG([$_am_tar --version]) && break
! 7204: done
! 7205: am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
! 7206: am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
! 7207: am__untar="$_am_tar -xf -"
! 7208: ;;
! 7209: plaintar)
! 7210: # Must skip GNU tar: if it does not support --format= it doesn't create
! 7211: # ustar tarball either.
! 7212: (tar --version) >/dev/null 2>&1 && continue
! 7213: am__tar='tar chf - "$$tardir"'
! 7214: am__tar_='tar chf - "$tardir"'
! 7215: am__untar='tar xf -'
! 7216: ;;
! 7217: pax)
! 7218: am__tar='pax -L -x $1 -w "$$tardir"'
! 7219: am__tar_='pax -L -x $1 -w "$tardir"'
! 7220: am__untar='pax -r'
! 7221: ;;
! 7222: cpio)
! 7223: am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
! 7224: am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
! 7225: am__untar='cpio -i -H $1 -d'
! 7226: ;;
! 7227: none)
! 7228: am__tar=false
! 7229: am__tar_=false
! 7230: am__untar=false
! 7231: ;;
! 7232: esac
! 7233:
! 7234: # If the value was cached, stop now. We just wanted to have am__tar
! 7235: # and am__untar set.
! 7236: test -n "${am_cv_prog_tar_$1}" && break
! 7237:
! 7238: # tar/untar a dummy directory, and stop if the command works
! 7239: rm -rf conftest.dir
! 7240: mkdir conftest.dir
! 7241: echo GrepMe > conftest.dir/file
! 7242: AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
! 7243: rm -rf conftest.dir
! 7244: if test -s conftest.tar; then
! 7245: AM_RUN_LOG([$am__untar <conftest.tar])
! 7246: grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
! 7247: fi
! 7248: done
! 7249: rm -rf conftest.dir
! 7250:
! 7251: AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
! 7252: AC_MSG_RESULT([$am_cv_prog_tar_$1])])
! 7253: AC_SUBST([am__tar])
! 7254: AC_SUBST([am__untar])
! 7255: ]) # _AM_PROG_TAR
! 7256:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to aclocal.m4 CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / coova-chilli