Return to defaults.in CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / coova-chilli / conf

coova-chilli

# -*- /bin/sh -*-
#
#   Coova-Chilli Default Configurations. 
#   To customize, copy this file to @ETCCHILLI@/config
#   and edit to your liking. This is included in shell scripts
#   that configure chilli and related programs before file 'config'. 


###
#   Local Network Configurations
# 

# HS_WANIF=eth0            # WAN Interface toward the Internet
HS_LANIF=eth1		   # Subscriber Interface for client devices
HS_NETWORK=10.1.0.0	   # HotSpot Network (must include HS_UAMLISTEN)
HS_NETMASK=255.255.255.0   # HotSpot Network Netmask
HS_UAMLISTEN=10.1.0.1	   # HotSpot IP Address (on subscriber network)
HS_UAMPORT=3990            # HotSpot Port (on subscriber network)

# HS_DYNIP=
# HS_DYNIP_MASK=255.255.255.0
# HS_STATIP=
# HS_STATIP_MASK=255.255.255.0
# HS_DNS_DOMAIN=
# HS_DNS1=
# HS_DNS2=

###
#   HotSpot settings for simple Captive Portal
#
HS_NASID=nas01
HS_UAMSECRET=
HS_RADIUS=rad01.coova.org
HS_RADIUS2=rad01.coova.org
HS_RADSECRET=coova-anonymous
HS_UAMALLOW=coova.org

#   Put entire domains in the walled-garden with DNS inspection
# HS_UAMDOMAINS=".paypal.com,.paypalobjects.com"

#   Optional initial redirect and RADIUS settings
# HS_SSID=<ssid>	   # To send to the captive portal
# HS_NASMAC=<mac address>  # To explicitly set Called-Station-Id
# HS_NASIP=<ip address>    # To explicitly set NAS-IP-Address

#   The server to be used in combination with HS_UAMFORMAT to 
#   create the final chilli 'uamserver' url configuration.
HS_UAMSERVER=coova.org

#   Use HS_UAMFORMAT to define the actual captive portal url.
#   Shell variable replacement takes place when evaluated, so here
#   HS_UAMSERVER is escaped and later replaced by the pre-defined 
#   HS_UAMSERVER to form the actual "--uamserver" option in chilli.
HS_UAMFORMAT=https://\$HS_UAMSERVER/app/uam/chilli

#   Same principal goes for HS_UAMHOMEPAGE.
HS_UAMHOMEPAGE=http://\$HS_UAMLISTEN:\$HS_UAMPORT/www/coova.html

#   This option will be configured to be the WISPr LoginURL as well
#   as provide "uamService" to the ChilliController. The UAM Service is
#   described in: http://coova.org/wiki/index.php/CoovaChilli/UAMService
#
HS_UAMSERVICE=https://coova.org/app/uam/auth


###
#   Features not activated per-default (default to off)
#
# HS_RADCONF=off	   # Get some configurations from RADIUS or a URL ('on' and 'url' respectively)
#
# HS_ANYIP=on		   # Allow any IP address on subscriber LAN
#
# HS_MACAUTH=on		   # To turn on MAC Authentication
#
# HS_MACAUTHDENY=on	   # Put client in 'drop' state on MAC Auth Access-Reject
#
# HS_MACAUTHMODE=local	   # To allow MAC Authentication based on macallowed, not RADIUS
#
# HS_MACALLOWED="..."      # List of MAC addresses to authenticate (comma seperated)
#
# HS_USELOCALUSERS=on      # To use the @ETCCHILLI@/localusers file
#
# HS_OPENIDAUTH=on	   # To inform the RADIUS server to allow OpenID Auth
#
# HS_WPAGUESTS=on	   # To inform the RADIUS server to allow WPA Guests
#
# HS_DNSPARANOIA=on	   # To drop DNS packets containing something other
#			   # than A, CNAME, SOA, or MX records
#
# HS_OPENIDAUTH=on	   # To inform the RADIUS server to allow OpenID Auth
#			   # Will also configure the embedded login forms for OpenID
#
# HS_USE_MAP=on		   # Short hand for allowing the required google
#			   # sites to use Google maps (adds many google sites!)
#
###
#   Other feature settings and their defaults
#
# HS_DEFSESSIONTIMEOUT=0   # Default session-timeout if not defined by RADIUS (0 for unlimited)
#
# HS_DEFIDLETIMEOUT=0	   # Default idle-timeout if not defined by RADIUS (0 for unlimited)
#
# HS_DEFBANDWIDTHMAXDOWN=0   # Default WISPr-Bandwidth-Max-Down if not defined by RADIUS (0 for unlimited)
#
# HS_DEFBANDWIDTHMAXUP=0	   # Default WISPr-Bandwidth-Max-Up if not defined by RADIUS (0 for unlimited)

###
# Centralized configuration options examples
# 
# HS_RADCONF=url	   # requires curl
# HS_RADCONF_URL=https://coova.org/app/ap/config

# HS_RADCONF=on		   # gather the ChilliSpot-Config attributes in
#			   # Administrative-User login
# HS_RADCONF_SERVER=rad01.coova.org		 # RADIUS Server
# HS_RADCONF_SECRET=coova-anonymous		 # RADIUS Shared Secret 
# HS_RADCONF_AUTHPORT=1812			 # Auth port
# HS_RADCONF_USER=chillispot			 # Username
# HS_RADCONF_PWD=chillispot			 # Password


###
#   Standard configurations
#
HS_MODE=hotspot
HS_TYPE=chillispot
# HS_RADAUTH=1812
# HS_RADACCT=1813
# HS_ADMUSR=chillispot
# HS_ADMPWD=chillispot


###
#   Post-Auth proxy settings
#
# HS_POSTAUTH_PROXY=<host or ip>
# HS_POSTAUTH_PROXYPORT=<port>

#   Directory specifying where internal web pages can be served
#   by chilli with url /www/<file name>. Only extentions like .html
#   .jpg, .gif, .png, .js are allowed. See below for using .chi as a
#   CGI extension.
HS_WWWDIR=@ETCCHILLI@/www

#   Using this option assumes 'haserl' is installed per-default
#   but, and CGI type program can ran from wwwsh to process requests
#   to chilli with url /www/filename.chi
HS_WWWBIN=@ETCCHILLI@/wwwsh

#   Some configurations used in certain user interfaces
#
HS_PROVIDER=Coova
HS_PROVIDER_LINK=http://www.coova.org/


###
#   WISPr RADIUS Attribute support
#

HS_LOC_NAME="My HotSpot"	   # WISPr Location Name and used in portal

#   WISPr settings (to form a proper WISPr-Location-Id)
# HS_LOC_NETWORK="My Network"	   # Network name
# HS_LOC_AC=408			   # Phone area code
# HS_LOC_CC=1			   # Phone country code
# HS_LOC_ISOCC=US		   # ISO Country code