Annotation of embedaddon/coova-chilli/missing, revision 1.1
1.1 ! misho 1: #! /bin/sh
! 2: # Common stub for a few missing GNU programs while installing.
! 3: # Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
! 4: # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
! 5:
! 6: # This program is free software; you can redistribute it and/or modify
! 7: # it under the terms of the GNU General Public License as published by
! 8: # the Free Software Foundation; either version 2, or (at your option)
! 9: # any later version.
! 10:
! 11: # This program is distributed in the hope that it will be useful,
! 12: # but WITHOUT ANY WARRANTY; without even the implied warranty of
! 13: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! 14: # GNU General Public License for more details.
! 15:
! 16: # You should have received a copy of the GNU General Public License
! 17: # along with this program; if not, write to the Free Software
! 18: # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
! 19: # 02111-1307, USA.
! 20:
! 21: # As a special exception to the GNU General Public License, if you
! 22: # distribute this file as part of a program that contains a
! 23: # configuration script generated by Autoconf, you may include it under
! 24: # the same distribution terms that you use for the rest of that program.
! 25:
! 26: if test $# -eq 0; then
! 27: echo 1>&2 "Try \`$0 --help' for more information"
! 28: exit 1
! 29: fi
! 30:
! 31: run=:
! 32:
! 33: # In the cases where this matters, `missing' is being run in the
! 34: # srcdir already.
! 35: if test -f configure.ac; then
! 36: configure_ac=configure.ac
! 37: else
! 38: configure_ac=configure.in
! 39: fi
! 40:
! 41: case "$1" in
! 42: --run)
! 43: # Try to run requested program, and just exit if it succeeds.
! 44: run=
! 45: shift
! 46: "$@" && exit 0
! 47: ;;
! 48: esac
! 49:
! 50: # If it does not exist, or fails to run (possibly an outdated version),
! 51: # try to emulate it.
! 52: case "$1" in
! 53:
! 54: -h|--h|--he|--hel|--help)
! 55: echo "\
! 56: $0 [OPTION]... PROGRAM [ARGUMENT]...
! 57:
! 58: Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
! 59: error status if there is no known handling for PROGRAM.
! 60:
! 61: Options:
! 62: -h, --help display this help and exit
! 63: -v, --version output version information and exit
! 64: --run try to run the given command, and emulate it if it fails
! 65:
! 66: Supported PROGRAM values:
! 67: aclocal touch file \`aclocal.m4'
! 68: autoconf touch file \`configure'
! 69: autoheader touch file \`config.h.in'
! 70: automake touch all \`Makefile.in' files
! 71: bison create \`y.tab.[ch]', if possible, from existing .[ch]
! 72: flex create \`lex.yy.c', if possible, from existing .c
! 73: help2man touch the output file
! 74: lex create \`lex.yy.c', if possible, from existing .c
! 75: makeinfo touch the output file
! 76: tar try tar, gnutar, gtar, then tar without non-portable flags
! 77: yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
! 78: ;;
! 79:
! 80: -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
! 81: echo "missing 0.4 - GNU automake"
! 82: ;;
! 83:
! 84: -*)
! 85: echo 1>&2 "$0: Unknown \`$1' option"
! 86: echo 1>&2 "Try \`$0 --help' for more information"
! 87: exit 1
! 88: ;;
! 89:
! 90: aclocal*)
! 91: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 92: # We have it, but it failed.
! 93: exit 1
! 94: fi
! 95:
! 96: echo 1>&2 "\
! 97: WARNING: \`$1' is missing on your system. You should only need it if
! 98: you modified \`acinclude.m4' or \`${configure_ac}'. You might want
! 99: to install the \`Automake' and \`Perl' packages. Grab them from
! 100: any GNU archive site."
! 101: touch aclocal.m4
! 102: ;;
! 103:
! 104: autoconf)
! 105: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 106: # We have it, but it failed.
! 107: exit 1
! 108: fi
! 109:
! 110: echo 1>&2 "\
! 111: WARNING: \`$1' is missing on your system. You should only need it if
! 112: you modified \`${configure_ac}'. You might want to install the
! 113: \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
! 114: archive site."
! 115: touch configure
! 116: ;;
! 117:
! 118: autoheader)
! 119: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 120: # We have it, but it failed.
! 121: exit 1
! 122: fi
! 123:
! 124: echo 1>&2 "\
! 125: WARNING: \`$1' is missing on your system. You should only need it if
! 126: you modified \`acconfig.h' or \`${configure_ac}'. You might want
! 127: to install the \`Autoconf' and \`GNU m4' packages. Grab them
! 128: from any GNU archive site."
! 129: files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
! 130: test -z "$files" && files="config.h"
! 131: touch_files=
! 132: for f in $files; do
! 133: case "$f" in
! 134: *:*) touch_files="$touch_files "`echo "$f" |
! 135: sed -e 's/^[^:]*://' -e 's/:.*//'`;;
! 136: *) touch_files="$touch_files $f.in";;
! 137: esac
! 138: done
! 139: touch $touch_files
! 140: ;;
! 141:
! 142: automake*)
! 143: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 144: # We have it, but it failed.
! 145: exit 1
! 146: fi
! 147:
! 148: echo 1>&2 "\
! 149: WARNING: \`$1' is missing on your system. You should only need it if
! 150: you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
! 151: You might want to install the \`Automake' and \`Perl' packages.
! 152: Grab them from any GNU archive site."
! 153: find . -type f -name Makefile.am -print |
! 154: sed 's/\.am$/.in/' |
! 155: while read f; do touch "$f"; done
! 156: ;;
! 157:
! 158: autom4te)
! 159: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 160: # We have it, but it failed.
! 161: exit 1
! 162: fi
! 163:
! 164: echo 1>&2 "\
! 165: WARNING: \`$1' is needed, and you do not seem to have it handy on your
! 166: system. You might have modified some files without having the
! 167: proper tools for further handling them.
! 168: You can get \`$1Help2man' as part of \`Autoconf' from any GNU
! 169: archive site."
! 170:
! 171: file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
! 172: test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
! 173: if test -f "$file"; then
! 174: touch $file
! 175: else
! 176: test -z "$file" || exec >$file
! 177: echo "#! /bin/sh"
! 178: echo "# Created by GNU Automake missing as a replacement of"
! 179: echo "# $ $@"
! 180: echo "exit 0"
! 181: chmod +x $file
! 182: exit 1
! 183: fi
! 184: ;;
! 185:
! 186: bison|yacc)
! 187: echo 1>&2 "\
! 188: WARNING: \`$1' is missing on your system. You should only need it if
! 189: you modified a \`.y' file. You may need the \`Bison' package
! 190: in order for those modifications to take effect. You can get
! 191: \`Bison' from any GNU archive site."
! 192: rm -f y.tab.c y.tab.h
! 193: if [ $# -ne 1 ]; then
! 194: eval LASTARG="\${$#}"
! 195: case "$LASTARG" in
! 196: *.y)
! 197: SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
! 198: if [ -f "$SRCFILE" ]; then
! 199: cp "$SRCFILE" y.tab.c
! 200: fi
! 201: SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
! 202: if [ -f "$SRCFILE" ]; then
! 203: cp "$SRCFILE" y.tab.h
! 204: fi
! 205: ;;
! 206: esac
! 207: fi
! 208: if [ ! -f y.tab.h ]; then
! 209: echo >y.tab.h
! 210: fi
! 211: if [ ! -f y.tab.c ]; then
! 212: echo 'main() { return 0; }' >y.tab.c
! 213: fi
! 214: ;;
! 215:
! 216: lex|flex)
! 217: echo 1>&2 "\
! 218: WARNING: \`$1' is missing on your system. You should only need it if
! 219: you modified a \`.l' file. You may need the \`Flex' package
! 220: in order for those modifications to take effect. You can get
! 221: \`Flex' from any GNU archive site."
! 222: rm -f lex.yy.c
! 223: if [ $# -ne 1 ]; then
! 224: eval LASTARG="\${$#}"
! 225: case "$LASTARG" in
! 226: *.l)
! 227: SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
! 228: if [ -f "$SRCFILE" ]; then
! 229: cp "$SRCFILE" lex.yy.c
! 230: fi
! 231: ;;
! 232: esac
! 233: fi
! 234: if [ ! -f lex.yy.c ]; then
! 235: echo 'main() { return 0; }' >lex.yy.c
! 236: fi
! 237: ;;
! 238:
! 239: help2man)
! 240: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 241: # We have it, but it failed.
! 242: exit 1
! 243: fi
! 244:
! 245: echo 1>&2 "\
! 246: WARNING: \`$1' is missing on your system. You should only need it if
! 247: you modified a dependency of a manual page. You may need the
! 248: \`Help2man' package in order for those modifications to take
! 249: effect. You can get \`Help2man' from any GNU archive site."
! 250:
! 251: file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
! 252: if test -z "$file"; then
! 253: file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
! 254: fi
! 255: if [ -f "$file" ]; then
! 256: touch $file
! 257: else
! 258: test -z "$file" || exec >$file
! 259: echo ".ab help2man is required to generate this page"
! 260: exit 1
! 261: fi
! 262: ;;
! 263:
! 264: makeinfo)
! 265: if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
! 266: # We have makeinfo, but it failed.
! 267: exit 1
! 268: fi
! 269:
! 270: echo 1>&2 "\
! 271: WARNING: \`$1' is missing on your system. You should only need it if
! 272: you modified a \`.texi' or \`.texinfo' file, or any other file
! 273: indirectly affecting the aspect of the manual. The spurious
! 274: call might also be the consequence of using a buggy \`make' (AIX,
! 275: DU, IRIX). You might want to install the \`Texinfo' package or
! 276: the \`GNU make' package. Grab either from any GNU archive site."
! 277: file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
! 278: if test -z "$file"; then
! 279: file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
! 280: file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
! 281: fi
! 282: touch $file
! 283: ;;
! 284:
! 285: tar)
! 286: shift
! 287: if test -n "$run"; then
! 288: echo 1>&2 "ERROR: \`tar' requires --run"
! 289: exit 1
! 290: fi
! 291:
! 292: # We have already tried tar in the generic part.
! 293: # Look for gnutar/gtar before invocation to avoid ugly error
! 294: # messages.
! 295: if (gnutar --version > /dev/null 2>&1); then
! 296: gnutar "$@" && exit 0
! 297: fi
! 298: if (gtar --version > /dev/null 2>&1); then
! 299: gtar "$@" && exit 0
! 300: fi
! 301: firstarg="$1"
! 302: if shift; then
! 303: case "$firstarg" in
! 304: *o*)
! 305: firstarg=`echo "$firstarg" | sed s/o//`
! 306: tar "$firstarg" "$@" && exit 0
! 307: ;;
! 308: esac
! 309: case "$firstarg" in
! 310: *h*)
! 311: firstarg=`echo "$firstarg" | sed s/h//`
! 312: tar "$firstarg" "$@" && exit 0
! 313: ;;
! 314: esac
! 315: fi
! 316:
! 317: echo 1>&2 "\
! 318: WARNING: I can't seem to be able to run \`tar' with the given arguments.
! 319: You may want to install GNU tar or Free paxutils, or check the
! 320: command line arguments."
! 321: exit 1
! 322: ;;
! 323:
! 324: *)
! 325: echo 1>&2 "\
! 326: WARNING: \`$1' is needed, and you do not seem to have it handy on your
! 327: system. You might have modified some files without having the
! 328: proper tools for further handling them. Check the \`README' file,
! 329: it often tells you about the needed prerequirements for installing
! 330: this package. You may also peek at any GNU archive site, in case
! 331: some other package would contain this missing \`$1' program."
! 332: exit 1
! 333: ;;
! 334: esac
! 335:
! 336: exit 0
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to missing CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / coova-chilli