Annotation of embedaddon/curl/docs/libcurl/opts/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.16.2 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994-2020 Free Software Foundation, Inc.
! 5:
! 6: # This Makefile.in is free software; the Free Software Foundation
! 7: # gives unlimited permission to copy and/or distribute it,
! 8: # with or without modifications, as long as this notice is preserved.
! 9:
! 10: # This program is distributed in the hope that it will be useful,
! 11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 13: # PARTICULAR PURPOSE.
! 14:
! 15: @SET_MAKE@
! 16:
! 17: #***************************************************************************
! 18: # _ _ ____ _
! 19: # Project ___| | | | _ \| |
! 20: # / __| | | | |_) | |
! 21: # | (__| |_| | _ <| |___
! 22: # \___|\___/|_| \_\_____|
! 23: #
! 24: # Copyright (C) 1998 - 2017, Daniel Stenberg, <daniel@haxx.se>, et al.
! 25: #
! 26: # This software is licensed as described in the file COPYING, which
! 27: # you should have received as part of this distribution. The terms
! 28: # are also available at https://curl.haxx.se/docs/copyright.html.
! 29: #
! 30: # You may opt to use, copy, modify, merge, publish, distribute and/or sell
! 31: # copies of the Software, and permit persons to whom the Software is
! 32: # furnished to do so, under the terms of the COPYING file.
! 33: #
! 34: # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
! 35: # KIND, either express or implied.
! 36: #
! 37: ###########################################################################
! 38:
! 39: #***************************************************************************
! 40: # _ _ ____ _
! 41: # Project ___| | | | _ \| |
! 42: # / __| | | | |_) | |
! 43: # | (__| |_| | _ <| |___
! 44: # \___|\___/|_| \_\_____|
! 45: #
! 46: # Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al.
! 47: #
! 48: # This software is licensed as described in the file COPYING, which
! 49: # you should have received as part of this distribution. The terms
! 50: # are also available at https://curl.haxx.se/docs/copyright.html.
! 51: #
! 52: # You may opt to use, copy, modify, merge, publish, distribute and/or sell
! 53: # copies of the Software, and permit persons to whom the Software is
! 54: # furnished to do so, under the terms of the COPYING file.
! 55: #
! 56: # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
! 57: # KIND, either express or implied.
! 58: #
! 59: ###########################################################################
! 60: # Shared between Makefile.am and CMakeLists.txt
! 61: VPATH = @srcdir@
! 62: am__is_gnu_make = { \
! 63: if test -z '$(MAKELEVEL)'; then \
! 64: false; \
! 65: elif test -n '$(MAKE_HOST)'; then \
! 66: true; \
! 67: elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
! 68: true; \
! 69: else \
! 70: false; \
! 71: fi; \
! 72: }
! 73: am__make_running_with_option = \
! 74: case $${target_option-} in \
! 75: ?) ;; \
! 76: *) echo "am__make_running_with_option: internal error: invalid" \
! 77: "target option '$${target_option-}' specified" >&2; \
! 78: exit 1;; \
! 79: esac; \
! 80: has_opt=no; \
! 81: sane_makeflags=$$MAKEFLAGS; \
! 82: if $(am__is_gnu_make); then \
! 83: sane_makeflags=$$MFLAGS; \
! 84: else \
! 85: case $$MAKEFLAGS in \
! 86: *\\[\ \ ]*) \
! 87: bs=\\; \
! 88: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
! 89: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
! 90: esac; \
! 91: fi; \
! 92: skip_next=no; \
! 93: strip_trailopt () \
! 94: { \
! 95: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
! 96: }; \
! 97: for flg in $$sane_makeflags; do \
! 98: test $$skip_next = yes && { skip_next=no; continue; }; \
! 99: case $$flg in \
! 100: *=*|--*) continue;; \
! 101: -*I) strip_trailopt 'I'; skip_next=yes;; \
! 102: -*I?*) strip_trailopt 'I';; \
! 103: -*O) strip_trailopt 'O'; skip_next=yes;; \
! 104: -*O?*) strip_trailopt 'O';; \
! 105: -*l) strip_trailopt 'l'; skip_next=yes;; \
! 106: -*l?*) strip_trailopt 'l';; \
! 107: -[dEDm]) skip_next=yes;; \
! 108: -[JT]) skip_next=yes;; \
! 109: esac; \
! 110: case $$flg in \
! 111: *$$target_option*) has_opt=yes; break;; \
! 112: esac; \
! 113: done; \
! 114: test $$has_opt = yes
! 115: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
! 116: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
! 117: pkgdatadir = $(datadir)/@PACKAGE@
! 118: pkgincludedir = $(includedir)/@PACKAGE@
! 119: pkglibdir = $(libdir)/@PACKAGE@
! 120: pkglibexecdir = $(libexecdir)/@PACKAGE@
! 121: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 122: install_sh_DATA = $(install_sh) -c -m 644
! 123: install_sh_PROGRAM = $(install_sh) -c
! 124: install_sh_SCRIPT = $(install_sh) -c
! 125: INSTALL_HEADER = $(INSTALL_DATA)
! 126: transform = $(program_transform_name)
! 127: NORMAL_INSTALL = :
! 128: PRE_INSTALL = :
! 129: POST_INSTALL = :
! 130: NORMAL_UNINSTALL = :
! 131: PRE_UNINSTALL = :
! 132: POST_UNINSTALL = :
! 133: build_triplet = @build@
! 134: host_triplet = @host@
! 135: subdir = docs/libcurl/opts
! 136: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 137: am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compile_check_sizeof.m4 \
! 138: $(top_srcdir)/m4/curl-compilers.m4 \
! 139: $(top_srcdir)/m4/curl-confopts.m4 \
! 140: $(top_srcdir)/m4/curl-functions.m4 \
! 141: $(top_srcdir)/m4/curl-openssl.m4 \
! 142: $(top_srcdir)/m4/curl-override.m4 \
! 143: $(top_srcdir)/m4/curl-reentrant.m4 $(top_srcdir)/m4/libtool.m4 \
! 144: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
! 145: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
! 146: $(top_srcdir)/m4/xc-am-iface.m4 \
! 147: $(top_srcdir)/m4/xc-cc-check.m4 \
! 148: $(top_srcdir)/m4/xc-lt-iface.m4 \
! 149: $(top_srcdir)/m4/xc-translit.m4 \
! 150: $(top_srcdir)/m4/xc-val-flgs.m4 \
! 151: $(top_srcdir)/m4/zz40-xc-ovr.m4 \
! 152: $(top_srcdir)/m4/zz50-xc-ovr.m4 \
! 153: $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
! 154: $(top_srcdir)/configure.ac
! 155: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 156: $(ACLOCAL_M4)
! 157: DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
! 158: mkinstalldirs = $(install_sh) -d
! 159: CONFIG_HEADER = $(top_builddir)/lib/curl_config.h
! 160: CONFIG_CLEAN_FILES =
! 161: CONFIG_CLEAN_VPATH_FILES =
! 162: AM_V_P = $(am__v_P_@AM_V@)
! 163: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
! 164: am__v_P_0 = false
! 165: am__v_P_1 = :
! 166: AM_V_GEN = $(am__v_GEN_@AM_V@)
! 167: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
! 168: am__v_GEN_0 = @echo " GEN " $@;
! 169: am__v_GEN_1 =
! 170: AM_V_at = $(am__v_at_@AM_V@)
! 171: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
! 172: am__v_at_0 = @
! 173: am__v_at_1 =
! 174: depcomp =
! 175: am__maybe_remake_depfiles =
! 176: SOURCES =
! 177: DIST_SOURCES =
! 178: am__can_run_installinfo = \
! 179: case $$AM_UPDATE_INFO_DIR in \
! 180: n|no|NO) false;; \
! 181: *) (install-info --version) >/dev/null 2>&1;; \
! 182: esac
! 183: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
! 184: am__vpath_adj = case $$p in \
! 185: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
! 186: *) f=$$p;; \
! 187: esac;
! 188: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
! 189: am__install_max = 40
! 190: am__nobase_strip_setup = \
! 191: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
! 192: am__nobase_strip = \
! 193: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
! 194: am__nobase_list = $(am__nobase_strip_setup); \
! 195: for p in $$list; do echo "$$p $$p"; done | \
! 196: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
! 197: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
! 198: if (++n[$$2] == $(am__install_max)) \
! 199: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
! 200: END { for (dir in files) print dir, files[dir] }'
! 201: am__base_list = \
! 202: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
! 203: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
! 204: am__uninstall_files_from_dir = { \
! 205: test -z "$$files" \
! 206: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
! 207: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
! 208: $(am__cd) "$$dir" && rm -f $$files; }; \
! 209: }
! 210: man3dir = $(mandir)/man3
! 211: am__installdirs = "$(DESTDIR)$(man3dir)"
! 212: MANS = $(man_MANS)
! 213: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
! 214: am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.inc
! 215: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 216: ACLOCAL = @ACLOCAL@
! 217: AMTAR = @AMTAR@
! 218: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
! 219: AR = @AR@
! 220: AR_FLAGS = @AR_FLAGS@
! 221: AS = @AS@
! 222: AUTOCONF = @AUTOCONF@
! 223: AUTOHEADER = @AUTOHEADER@
! 224: AUTOMAKE = @AUTOMAKE@
! 225: AWK = @AWK@
! 226: BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
! 227: CC = @CC@
! 228: CCDEPMODE = @CCDEPMODE@
! 229: CFLAGS = @CFLAGS@
! 230: CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
! 231: CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
! 232: CPP = @CPP@
! 233: CPPFLAGS = @CPPFLAGS@
! 234: CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
! 235: CURLVERSION = @CURLVERSION@
! 236: CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
! 237: CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
! 238: CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
! 239: CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
! 240: CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
! 241: CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
! 242: CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
! 243: CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
! 244: CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
! 245: CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
! 246: CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
! 247: CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
! 248: CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
! 249: CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
! 250: CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
! 251: CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
! 252: CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
! 253: CURL_ENABLE_MQTT = @CURL_ENABLE_MQTT@
! 254: CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
! 255: CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
! 256: CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
! 257: CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@
! 258: CYGPATH_W = @CYGPATH_W@
! 259: DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@
! 260: DEFS = @DEFS@
! 261: DEPDIR = @DEPDIR@
! 262: DLLTOOL = @DLLTOOL@
! 263: DSYMUTIL = @DSYMUTIL@
! 264: DUMPBIN = @DUMPBIN@
! 265: ECHO_C = @ECHO_C@
! 266: ECHO_N = @ECHO_N@
! 267: ECHO_T = @ECHO_T@
! 268: EGREP = @EGREP@
! 269: ENABLE_SHARED = @ENABLE_SHARED@
! 270: ENABLE_STATIC = @ENABLE_STATIC@
! 271: EXEEXT = @EXEEXT@
! 272: FGREP = @FGREP@
! 273: FISH_FUNCTIONS_DIR = @FISH_FUNCTIONS_DIR@
! 274: GCOV = @GCOV@
! 275: GREP = @GREP@
! 276: HAVE_BROTLI = @HAVE_BROTLI@
! 277: HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
! 278: HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
! 279: HAVE_LIBZ = @HAVE_LIBZ@
! 280: HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
! 281: HAVE_PROTO_BSDSOCKET_H = @HAVE_PROTO_BSDSOCKET_H@
! 282: IDN_ENABLED = @IDN_ENABLED@
! 283: INSTALL = @INSTALL@
! 284: INSTALL_DATA = @INSTALL_DATA@
! 285: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 286: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 287: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 288: IPV6_ENABLED = @IPV6_ENABLED@
! 289: LCOV = @LCOV@
! 290: LD = @LD@
! 291: LDFLAGS = @LDFLAGS@
! 292: LIBCURL_LIBS = @LIBCURL_LIBS@
! 293: LIBMETALINK_CPPFLAGS = @LIBMETALINK_CPPFLAGS@
! 294: LIBMETALINK_LDFLAGS = @LIBMETALINK_LDFLAGS@
! 295: LIBMETALINK_LIBS = @LIBMETALINK_LIBS@
! 296: LIBOBJS = @LIBOBJS@
! 297: LIBS = @LIBS@
! 298: LIBTOOL = @LIBTOOL@
! 299: LIPO = @LIPO@
! 300: LN_S = @LN_S@
! 301: LTLIBOBJS = @LTLIBOBJS@
! 302: LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
! 303: MAINT = @MAINT@
! 304: MAKEINFO = @MAKEINFO@
! 305: MANIFEST_TOOL = @MANIFEST_TOOL@
! 306: MANOPT = @MANOPT@
! 307: MKDIR_P = @MKDIR_P@
! 308: NM = @NM@
! 309: NMEDIT = @NMEDIT@
! 310: NROFF = @NROFF@
! 311: NSS_LIBS = @NSS_LIBS@
! 312: OBJDUMP = @OBJDUMP@
! 313: OBJEXT = @OBJEXT@
! 314: OTOOL = @OTOOL@
! 315: OTOOL64 = @OTOOL64@
! 316: PACKAGE = @PACKAGE@
! 317: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 318: PACKAGE_NAME = @PACKAGE_NAME@
! 319: PACKAGE_STRING = @PACKAGE_STRING@
! 320: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 321: PACKAGE_URL = @PACKAGE_URL@
! 322: PACKAGE_VERSION = @PACKAGE_VERSION@
! 323: PATH_SEPARATOR = @PATH_SEPARATOR@
! 324: PERL = @PERL@
! 325: PKGADD_NAME = @PKGADD_NAME@
! 326: PKGADD_PKG = @PKGADD_PKG@
! 327: PKGADD_VENDOR = @PKGADD_VENDOR@
! 328: PKGCONFIG = @PKGCONFIG@
! 329: RANDOM_FILE = @RANDOM_FILE@
! 330: RANLIB = @RANLIB@
! 331: REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
! 332: SED = @SED@
! 333: SET_MAKE = @SET_MAKE@
! 334: SHELL = @SHELL@
! 335: SSL_BACKENDS = @SSL_BACKENDS@
! 336: SSL_ENABLED = @SSL_ENABLED@
! 337: SSL_LIBS = @SSL_LIBS@
! 338: STRIP = @STRIP@
! 339: SUPPORT_FEATURES = @SUPPORT_FEATURES@
! 340: SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
! 341: USE_ARES = @USE_ARES@
! 342: USE_BEARSSL = @USE_BEARSSL@
! 343: USE_GNUTLS = @USE_GNUTLS@
! 344: USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
! 345: USE_LIBRTMP = @USE_LIBRTMP@
! 346: USE_LIBSSH = @USE_LIBSSH@
! 347: USE_LIBSSH2 = @USE_LIBSSH2@
! 348: USE_MBEDTLS = @USE_MBEDTLS@
! 349: USE_MESALINK = @USE_MESALINK@
! 350: USE_NGHTTP2 = @USE_NGHTTP2@
! 351: USE_NGHTTP3 = @USE_NGHTTP3@
! 352: USE_NGTCP2 = @USE_NGTCP2@
! 353: USE_NGTCP2_CRYPTO_GNUTLS = @USE_NGTCP2_CRYPTO_GNUTLS@
! 354: USE_NGTCP2_CRYPTO_OPENSSL = @USE_NGTCP2_CRYPTO_OPENSSL@
! 355: USE_NSS = @USE_NSS@
! 356: USE_OPENLDAP = @USE_OPENLDAP@
! 357: USE_QUICHE = @USE_QUICHE@
! 358: USE_SCHANNEL = @USE_SCHANNEL@
! 359: USE_SECTRANSP = @USE_SECTRANSP@
! 360: USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
! 361: USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
! 362: USE_WOLFSSH = @USE_WOLFSSH@
! 363: USE_WOLFSSL = @USE_WOLFSSL@
! 364: VERSION = @VERSION@
! 365: VERSIONNUM = @VERSIONNUM@
! 366: ZLIB_LIBS = @ZLIB_LIBS@
! 367: ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
! 368: abs_builddir = @abs_builddir@
! 369: abs_srcdir = @abs_srcdir@
! 370: abs_top_builddir = @abs_top_builddir@
! 371: abs_top_srcdir = @abs_top_srcdir@
! 372: ac_ct_AR = @ac_ct_AR@
! 373: ac_ct_CC = @ac_ct_CC@
! 374: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
! 375: am__include = @am__include@
! 376: am__leading_dot = @am__leading_dot@
! 377: am__quote = @am__quote@
! 378: am__tar = @am__tar@
! 379: am__untar = @am__untar@
! 380: bindir = @bindir@
! 381: build = @build@
! 382: build_alias = @build_alias@
! 383: build_cpu = @build_cpu@
! 384: build_os = @build_os@
! 385: build_vendor = @build_vendor@
! 386: builddir = @builddir@
! 387: datadir = @datadir@
! 388: datarootdir = @datarootdir@
! 389: docdir = @docdir@
! 390: dvidir = @dvidir@
! 391: exec_prefix = @exec_prefix@
! 392: host = @host@
! 393: host_alias = @host_alias@
! 394: host_cpu = @host_cpu@
! 395: host_os = @host_os@
! 396: host_vendor = @host_vendor@
! 397: htmldir = @htmldir@
! 398: includedir = @includedir@
! 399: infodir = @infodir@
! 400: install_sh = @install_sh@
! 401: libdir = @libdir@
! 402: libexecdir = @libexecdir@
! 403: libext = @libext@
! 404: localedir = @localedir@
! 405: localstatedir = @localstatedir@
! 406: mandir = @mandir@
! 407: mkdir_p = @mkdir_p@
! 408: oldincludedir = @oldincludedir@
! 409: pdfdir = @pdfdir@
! 410: prefix = @prefix@
! 411: program_transform_name = @program_transform_name@
! 412: psdir = @psdir@
! 413: runstatedir = @runstatedir@
! 414: sbindir = @sbindir@
! 415: sharedstatedir = @sharedstatedir@
! 416: srcdir = @srcdir@
! 417: subdirs = @subdirs@
! 418: sysconfdir = @sysconfdir@
! 419: target_alias = @target_alias@
! 420: top_build_prefix = @top_build_prefix@
! 421: top_builddir = @top_builddir@
! 422: top_srcdir = @top_srcdir@
! 423: AUTOMAKE_OPTIONS = foreign no-dependencies
! 424: man_MANS = \
! 425: CURLINFO_ACTIVESOCKET.3 \
! 426: CURLINFO_APPCONNECT_TIME.3 \
! 427: CURLINFO_APPCONNECT_TIME_T.3 \
! 428: CURLINFO_CERTINFO.3 \
! 429: CURLINFO_CONDITION_UNMET.3 \
! 430: CURLINFO_CONNECT_TIME.3 \
! 431: CURLINFO_CONNECT_TIME_T.3 \
! 432: CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 \
! 433: CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 \
! 434: CURLINFO_CONTENT_LENGTH_UPLOAD.3 \
! 435: CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 \
! 436: CURLINFO_CONTENT_TYPE.3 \
! 437: CURLINFO_COOKIELIST.3 \
! 438: CURLINFO_EFFECTIVE_URL.3 \
! 439: CURLINFO_FILETIME.3 \
! 440: CURLINFO_FILETIME_T.3 \
! 441: CURLINFO_FTP_ENTRY_PATH.3 \
! 442: CURLINFO_HEADER_SIZE.3 \
! 443: CURLINFO_HTTPAUTH_AVAIL.3 \
! 444: CURLINFO_HTTP_CONNECTCODE.3 \
! 445: CURLINFO_HTTP_VERSION.3 \
! 446: CURLINFO_LASTSOCKET.3 \
! 447: CURLINFO_LOCAL_IP.3 \
! 448: CURLINFO_LOCAL_PORT.3 \
! 449: CURLINFO_NAMELOOKUP_TIME.3 \
! 450: CURLINFO_NAMELOOKUP_TIME_T.3 \
! 451: CURLINFO_NUM_CONNECTS.3 \
! 452: CURLINFO_OS_ERRNO.3 \
! 453: CURLINFO_PRETRANSFER_TIME.3 \
! 454: CURLINFO_PRETRANSFER_TIME_T.3 \
! 455: CURLINFO_PRIMARY_IP.3 \
! 456: CURLINFO_PRIMARY_PORT.3 \
! 457: CURLINFO_PRIVATE.3 \
! 458: CURLINFO_PROTOCOL.3 \
! 459: CURLINFO_PROXYAUTH_AVAIL.3 \
! 460: CURLINFO_PROXY_SSL_VERIFYRESULT.3 \
! 461: CURLINFO_REDIRECT_COUNT.3 \
! 462: CURLINFO_REDIRECT_TIME.3 \
! 463: CURLINFO_REDIRECT_TIME_T.3 \
! 464: CURLINFO_REDIRECT_URL.3 \
! 465: CURLINFO_REQUEST_SIZE.3 \
! 466: CURLINFO_RESPONSE_CODE.3 \
! 467: CURLINFO_RETRY_AFTER.3 \
! 468: CURLINFO_RTSP_CLIENT_CSEQ.3 \
! 469: CURLINFO_RTSP_CSEQ_RECV.3 \
! 470: CURLINFO_RTSP_SERVER_CSEQ.3 \
! 471: CURLINFO_RTSP_SESSION_ID.3 \
! 472: CURLINFO_SCHEME.3 \
! 473: CURLINFO_SIZE_DOWNLOAD.3 \
! 474: CURLINFO_SIZE_DOWNLOAD_T.3 \
! 475: CURLINFO_SIZE_UPLOAD.3 \
! 476: CURLINFO_SIZE_UPLOAD_T.3 \
! 477: CURLINFO_SPEED_DOWNLOAD.3 \
! 478: CURLINFO_SPEED_DOWNLOAD_T.3 \
! 479: CURLINFO_SPEED_UPLOAD.3 \
! 480: CURLINFO_SPEED_UPLOAD_T.3 \
! 481: CURLINFO_SSL_ENGINES.3 \
! 482: CURLINFO_SSL_VERIFYRESULT.3 \
! 483: CURLINFO_STARTTRANSFER_TIME.3 \
! 484: CURLINFO_STARTTRANSFER_TIME_T.3 \
! 485: CURLINFO_TLS_SESSION.3 \
! 486: CURLINFO_TLS_SSL_PTR.3 \
! 487: CURLINFO_TOTAL_TIME.3 \
! 488: CURLINFO_TOTAL_TIME_T.3 \
! 489: CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE.3 \
! 490: CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE.3 \
! 491: CURLMOPT_MAXCONNECTS.3 \
! 492: CURLMOPT_MAX_CONCURRENT_STREAMS.3 \
! 493: CURLMOPT_MAX_HOST_CONNECTIONS.3 \
! 494: CURLMOPT_MAX_PIPELINE_LENGTH.3 \
! 495: CURLMOPT_MAX_TOTAL_CONNECTIONS.3 \
! 496: CURLMOPT_PIPELINING.3 \
! 497: CURLMOPT_PIPELINING_SERVER_BL.3 \
! 498: CURLMOPT_PIPELINING_SITE_BL.3 \
! 499: CURLMOPT_PUSHDATA.3 \
! 500: CURLMOPT_PUSHFUNCTION.3 \
! 501: CURLMOPT_SOCKETDATA.3 \
! 502: CURLMOPT_SOCKETFUNCTION.3 \
! 503: CURLMOPT_TIMERDATA.3 \
! 504: CURLMOPT_TIMERFUNCTION.3 \
! 505: CURLOPT_ABSTRACT_UNIX_SOCKET.3 \
! 506: CURLOPT_ACCEPTTIMEOUT_MS.3 \
! 507: CURLOPT_ACCEPT_ENCODING.3 \
! 508: CURLOPT_ADDRESS_SCOPE.3 \
! 509: CURLOPT_ALTSVC.3 \
! 510: CURLOPT_ALTSVC_CTRL.3 \
! 511: CURLOPT_APPEND.3 \
! 512: CURLOPT_AUTOREFERER.3 \
! 513: CURLOPT_BUFFERSIZE.3 \
! 514: CURLOPT_CAINFO.3 \
! 515: CURLOPT_CAPATH.3 \
! 516: CURLOPT_CERTINFO.3 \
! 517: CURLOPT_CHUNK_BGN_FUNCTION.3 \
! 518: CURLOPT_CHUNK_DATA.3 \
! 519: CURLOPT_CHUNK_END_FUNCTION.3 \
! 520: CURLOPT_CLOSESOCKETDATA.3 \
! 521: CURLOPT_CLOSESOCKETFUNCTION.3 \
! 522: CURLOPT_CONNECTTIMEOUT.3 \
! 523: CURLOPT_CONNECTTIMEOUT_MS.3 \
! 524: CURLOPT_CONNECT_ONLY.3 \
! 525: CURLOPT_CONNECT_TO.3 \
! 526: CURLOPT_CONV_FROM_NETWORK_FUNCTION.3 \
! 527: CURLOPT_CONV_FROM_UTF8_FUNCTION.3 \
! 528: CURLOPT_CONV_TO_NETWORK_FUNCTION.3 \
! 529: CURLOPT_COOKIE.3 \
! 530: CURLOPT_COOKIEFILE.3 \
! 531: CURLOPT_COOKIEJAR.3 \
! 532: CURLOPT_COOKIELIST.3 \
! 533: CURLOPT_COOKIESESSION.3 \
! 534: CURLOPT_COPYPOSTFIELDS.3 \
! 535: CURLOPT_CRLF.3 \
! 536: CURLOPT_CRLFILE.3 \
! 537: CURLOPT_CURLU.3 \
! 538: CURLOPT_CUSTOMREQUEST.3 \
! 539: CURLOPT_DEBUGDATA.3 \
! 540: CURLOPT_DEBUGFUNCTION.3 \
! 541: CURLOPT_DEFAULT_PROTOCOL.3 \
! 542: CURLOPT_DIRLISTONLY.3 \
! 543: CURLOPT_DISALLOW_USERNAME_IN_URL.3 \
! 544: CURLOPT_DNS_CACHE_TIMEOUT.3 \
! 545: CURLOPT_DNS_INTERFACE.3 \
! 546: CURLOPT_DNS_LOCAL_IP4.3 \
! 547: CURLOPT_DNS_LOCAL_IP6.3 \
! 548: CURLOPT_DNS_SERVERS.3 \
! 549: CURLOPT_DNS_SHUFFLE_ADDRESSES.3 \
! 550: CURLOPT_DNS_USE_GLOBAL_CACHE.3 \
! 551: CURLOPT_DOH_URL.3 \
! 552: CURLOPT_EGDSOCKET.3 \
! 553: CURLOPT_ERRORBUFFER.3 \
! 554: CURLOPT_EXPECT_100_TIMEOUT_MS.3 \
! 555: CURLOPT_FAILONERROR.3 \
! 556: CURLOPT_FILETIME.3 \
! 557: CURLOPT_FNMATCH_DATA.3 \
! 558: CURLOPT_FNMATCH_FUNCTION.3 \
! 559: CURLOPT_FOLLOWLOCATION.3 \
! 560: CURLOPT_FORBID_REUSE.3 \
! 561: CURLOPT_FRESH_CONNECT.3 \
! 562: CURLOPT_FTPPORT.3 \
! 563: CURLOPT_FTPSSLAUTH.3 \
! 564: CURLOPT_FTP_ACCOUNT.3 \
! 565: CURLOPT_FTP_ALTERNATIVE_TO_USER.3 \
! 566: CURLOPT_FTP_CREATE_MISSING_DIRS.3 \
! 567: CURLOPT_FTP_FILEMETHOD.3 \
! 568: CURLOPT_FTP_RESPONSE_TIMEOUT.3 \
! 569: CURLOPT_FTP_SKIP_PASV_IP.3 \
! 570: CURLOPT_FTP_SSL_CCC.3 \
! 571: CURLOPT_FTP_USE_EPRT.3 \
! 572: CURLOPT_FTP_USE_EPSV.3 \
! 573: CURLOPT_FTP_USE_PRET.3 \
! 574: CURLOPT_GSSAPI_DELEGATION.3 \
! 575: CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.3 \
! 576: CURLOPT_HAPROXYPROTOCOL.3 \
! 577: CURLOPT_HEADER.3 \
! 578: CURLOPT_HEADERDATA.3 \
! 579: CURLOPT_HEADERFUNCTION.3 \
! 580: CURLOPT_HEADEROPT.3 \
! 581: CURLOPT_HTTP09_ALLOWED.3 \
! 582: CURLOPT_HTTP200ALIASES.3 \
! 583: CURLOPT_HTTPAUTH.3 \
! 584: CURLOPT_HTTPGET.3 \
! 585: CURLOPT_HTTPHEADER.3 \
! 586: CURLOPT_HTTPPOST.3 \
! 587: CURLOPT_HTTPPROXYTUNNEL.3 \
! 588: CURLOPT_HTTP_CONTENT_DECODING.3 \
! 589: CURLOPT_HTTP_TRANSFER_DECODING.3 \
! 590: CURLOPT_HTTP_VERSION.3 \
! 591: CURLOPT_IGNORE_CONTENT_LENGTH.3 \
! 592: CURLOPT_INFILESIZE.3 \
! 593: CURLOPT_INFILESIZE_LARGE.3 \
! 594: CURLOPT_INTERFACE.3 \
! 595: CURLOPT_INTERLEAVEDATA.3 \
! 596: CURLOPT_INTERLEAVEFUNCTION.3 \
! 597: CURLOPT_IOCTLDATA.3 \
! 598: CURLOPT_IOCTLFUNCTION.3 \
! 599: CURLOPT_IPRESOLVE.3 \
! 600: CURLOPT_ISSUERCERT.3 \
! 601: CURLOPT_KEEP_SENDING_ON_ERROR.3 \
! 602: CURLOPT_KEYPASSWD.3 \
! 603: CURLOPT_KRBLEVEL.3 \
! 604: CURLOPT_LOCALPORT.3 \
! 605: CURLOPT_LOCALPORTRANGE.3 \
! 606: CURLOPT_LOGIN_OPTIONS.3 \
! 607: CURLOPT_LOW_SPEED_LIMIT.3 \
! 608: CURLOPT_LOW_SPEED_TIME.3 \
! 609: CURLOPT_MAIL_AUTH.3 \
! 610: CURLOPT_MAIL_FROM.3 \
! 611: CURLOPT_MAIL_RCPT.3 \
! 612: CURLOPT_MAIL_RCPT_ALLLOWFAILS.3 \
! 613: CURLOPT_MAXAGE_CONN.3 \
! 614: CURLOPT_MAXCONNECTS.3 \
! 615: CURLOPT_MAXFILESIZE.3 \
! 616: CURLOPT_MAXFILESIZE_LARGE.3 \
! 617: CURLOPT_MAXREDIRS.3 \
! 618: CURLOPT_MAX_RECV_SPEED_LARGE.3 \
! 619: CURLOPT_MAX_SEND_SPEED_LARGE.3 \
! 620: CURLOPT_MIMEPOST.3 \
! 621: CURLOPT_NETRC.3 \
! 622: CURLOPT_NETRC_FILE.3 \
! 623: CURLOPT_NEW_DIRECTORY_PERMS.3 \
! 624: CURLOPT_NEW_FILE_PERMS.3 \
! 625: CURLOPT_NOBODY.3 \
! 626: CURLOPT_NOPROGRESS.3 \
! 627: CURLOPT_NOPROXY.3 \
! 628: CURLOPT_NOSIGNAL.3 \
! 629: CURLOPT_OPENSOCKETDATA.3 \
! 630: CURLOPT_OPENSOCKETFUNCTION.3 \
! 631: CURLOPT_PASSWORD.3 \
! 632: CURLOPT_PATH_AS_IS.3 \
! 633: CURLOPT_PINNEDPUBLICKEY.3 \
! 634: CURLOPT_PIPEWAIT.3 \
! 635: CURLOPT_PORT.3 \
! 636: CURLOPT_POST.3 \
! 637: CURLOPT_POSTFIELDS.3 \
! 638: CURLOPT_POSTFIELDSIZE.3 \
! 639: CURLOPT_POSTFIELDSIZE_LARGE.3 \
! 640: CURLOPT_POSTQUOTE.3 \
! 641: CURLOPT_POSTREDIR.3 \
! 642: CURLOPT_PREQUOTE.3 \
! 643: CURLOPT_PRE_PROXY.3 \
! 644: CURLOPT_PRIVATE.3 \
! 645: CURLOPT_PROGRESSDATA.3 \
! 646: CURLOPT_PROGRESSFUNCTION.3 \
! 647: CURLOPT_PROTOCOLS.3 \
! 648: CURLOPT_PROXY.3 \
! 649: CURLOPT_PROXYAUTH.3 \
! 650: CURLOPT_PROXYHEADER.3 \
! 651: CURLOPT_PROXYPASSWORD.3 \
! 652: CURLOPT_PROXYPORT.3 \
! 653: CURLOPT_PROXYTYPE.3 \
! 654: CURLOPT_PROXYUSERNAME.3 \
! 655: CURLOPT_PROXYUSERPWD.3 \
! 656: CURLOPT_PROXY_CAINFO.3 \
! 657: CURLOPT_PROXY_CAPATH.3 \
! 658: CURLOPT_PROXY_CRLFILE.3 \
! 659: CURLOPT_PROXY_KEYPASSWD.3 \
! 660: CURLOPT_PROXY_PINNEDPUBLICKEY.3 \
! 661: CURLOPT_PROXY_SERVICE_NAME.3 \
! 662: CURLOPT_PROXY_SSLCERT.3 \
! 663: CURLOPT_PROXY_SSLCERTTYPE.3 \
! 664: CURLOPT_PROXY_SSLKEY.3 \
! 665: CURLOPT_PROXY_SSLKEYTYPE.3 \
! 666: CURLOPT_PROXY_SSLVERSION.3 \
! 667: CURLOPT_PROXY_SSL_CIPHER_LIST.3 \
! 668: CURLOPT_PROXY_SSL_OPTIONS.3 \
! 669: CURLOPT_PROXY_SSL_VERIFYHOST.3 \
! 670: CURLOPT_PROXY_SSL_VERIFYPEER.3 \
! 671: CURLOPT_PROXY_TLS13_CIPHERS.3 \
! 672: CURLOPT_PROXY_TLSAUTH_PASSWORD.3 \
! 673: CURLOPT_PROXY_TLSAUTH_TYPE.3 \
! 674: CURLOPT_PROXY_TLSAUTH_USERNAME.3 \
! 675: CURLOPT_PROXY_TRANSFER_MODE.3 \
! 676: CURLOPT_PUT.3 \
! 677: CURLOPT_QUOTE.3 \
! 678: CURLOPT_RANDOM_FILE.3 \
! 679: CURLOPT_RANGE.3 \
! 680: CURLOPT_READDATA.3 \
! 681: CURLOPT_READFUNCTION.3 \
! 682: CURLOPT_REDIR_PROTOCOLS.3 \
! 683: CURLOPT_REFERER.3 \
! 684: CURLOPT_REQUEST_TARGET.3 \
! 685: CURLOPT_RESOLVE.3 \
! 686: CURLOPT_RESOLVER_START_DATA.3 \
! 687: CURLOPT_RESOLVER_START_FUNCTION.3 \
! 688: CURLOPT_RESUME_FROM.3 \
! 689: CURLOPT_RESUME_FROM_LARGE.3 \
! 690: CURLOPT_RTSP_CLIENT_CSEQ.3 \
! 691: CURLOPT_RTSP_REQUEST.3 \
! 692: CURLOPT_RTSP_SERVER_CSEQ.3 \
! 693: CURLOPT_RTSP_SESSION_ID.3 \
! 694: CURLOPT_RTSP_STREAM_URI.3 \
! 695: CURLOPT_RTSP_TRANSPORT.3 \
! 696: CURLOPT_SASL_AUTHZID.3 \
! 697: CURLOPT_SASL_IR.3 \
! 698: CURLOPT_SEEKDATA.3 \
! 699: CURLOPT_SEEKFUNCTION.3 \
! 700: CURLOPT_SERVICE_NAME.3 \
! 701: CURLOPT_SHARE.3 \
! 702: CURLOPT_SOCKOPTDATA.3 \
! 703: CURLOPT_SOCKOPTFUNCTION.3 \
! 704: CURLOPT_SOCKS5_AUTH.3 \
! 705: CURLOPT_SOCKS5_GSSAPI_NEC.3 \
! 706: CURLOPT_SOCKS5_GSSAPI_SERVICE.3 \
! 707: CURLOPT_SSH_AUTH_TYPES.3 \
! 708: CURLOPT_SSH_COMPRESSION.3 \
! 709: CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.3 \
! 710: CURLOPT_SSH_KEYDATA.3 \
! 711: CURLOPT_SSH_KEYFUNCTION.3 \
! 712: CURLOPT_SSH_KNOWNHOSTS.3 \
! 713: CURLOPT_SSH_PRIVATE_KEYFILE.3 \
! 714: CURLOPT_SSH_PUBLIC_KEYFILE.3 \
! 715: CURLOPT_SSLCERT.3 \
! 716: CURLOPT_SSLCERTTYPE.3 \
! 717: CURLOPT_SSLENGINE.3 \
! 718: CURLOPT_SSLENGINE_DEFAULT.3 \
! 719: CURLOPT_SSLKEY.3 \
! 720: CURLOPT_SSLKEYTYPE.3 \
! 721: CURLOPT_SSLVERSION.3 \
! 722: CURLOPT_SSL_CIPHER_LIST.3 \
! 723: CURLOPT_SSL_CTX_DATA.3 \
! 724: CURLOPT_SSL_CTX_FUNCTION.3 \
! 725: CURLOPT_SSL_ENABLE_ALPN.3 \
! 726: CURLOPT_SSL_ENABLE_NPN.3 \
! 727: CURLOPT_SSL_FALSESTART.3 \
! 728: CURLOPT_SSL_OPTIONS.3 \
! 729: CURLOPT_SSL_SESSIONID_CACHE.3 \
! 730: CURLOPT_SSL_VERIFYHOST.3 \
! 731: CURLOPT_SSL_VERIFYPEER.3 \
! 732: CURLOPT_SSL_VERIFYSTATUS.3 \
! 733: CURLOPT_STDERR.3 \
! 734: CURLOPT_STREAM_DEPENDS.3 \
! 735: CURLOPT_STREAM_DEPENDS_E.3 \
! 736: CURLOPT_STREAM_WEIGHT.3 \
! 737: CURLOPT_SUPPRESS_CONNECT_HEADERS.3 \
! 738: CURLOPT_TCP_FASTOPEN.3 \
! 739: CURLOPT_TCP_KEEPALIVE.3 \
! 740: CURLOPT_TCP_KEEPIDLE.3 \
! 741: CURLOPT_TCP_KEEPINTVL.3 \
! 742: CURLOPT_TCP_NODELAY.3 \
! 743: CURLOPT_TELNETOPTIONS.3 \
! 744: CURLOPT_TFTP_BLKSIZE.3 \
! 745: CURLOPT_TFTP_NO_OPTIONS.3 \
! 746: CURLOPT_TIMECONDITION.3 \
! 747: CURLOPT_TIMEOUT.3 \
! 748: CURLOPT_TIMEOUT_MS.3 \
! 749: CURLOPT_TIMEVALUE.3 \
! 750: CURLOPT_TIMEVALUE_LARGE.3 \
! 751: CURLOPT_TLS13_CIPHERS.3 \
! 752: CURLOPT_TLSAUTH_PASSWORD.3 \
! 753: CURLOPT_TLSAUTH_TYPE.3 \
! 754: CURLOPT_TLSAUTH_USERNAME.3 \
! 755: CURLOPT_TRAILERDATA.3 \
! 756: CURLOPT_TRAILERFUNCTION.3 \
! 757: CURLOPT_TRANSFERTEXT.3 \
! 758: CURLOPT_TRANSFER_ENCODING.3 \
! 759: CURLOPT_UNIX_SOCKET_PATH.3 \
! 760: CURLOPT_UNRESTRICTED_AUTH.3 \
! 761: CURLOPT_UPKEEP_INTERVAL_MS.3 \
! 762: CURLOPT_UPLOAD.3 \
! 763: CURLOPT_UPLOAD_BUFFERSIZE.3 \
! 764: CURLOPT_URL.3 \
! 765: CURLOPT_USERAGENT.3 \
! 766: CURLOPT_USERNAME.3 \
! 767: CURLOPT_USERPWD.3 \
! 768: CURLOPT_USE_SSL.3 \
! 769: CURLOPT_VERBOSE.3 \
! 770: CURLOPT_WILDCARDMATCH.3 \
! 771: CURLOPT_WRITEDATA.3 \
! 772: CURLOPT_WRITEFUNCTION.3 \
! 773: CURLOPT_XFERINFODATA.3 \
! 774: CURLOPT_XFERINFOFUNCTION.3 \
! 775: CURLOPT_XOAUTH2_BEARER.3
! 776:
! 777: man_DISTMANS = $(man_MANS:.3=.3.dist)
! 778: HTMLPAGES = $(man_MANS:.3=.html)
! 779: PDFPAGES = $(man_MANS:.3=.pdf)
! 780: CLEANFILES = $(HTMLPAGES) $(PDFPAGES) $(man_DISTMANS)
! 781: EXTRA_DIST = $(man_MANS) CMakeLists.txt
! 782: MAN2HTML = roffit --mandir=. $< >$@
! 783: SUFFIXES = .3 .html
! 784: all: all-am
! 785:
! 786: .SUFFIXES:
! 787: .SUFFIXES: .3 .html .pdf
! 788: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/Makefile.inc $(am__configure_deps)
! 789: @for dep in $?; do \
! 790: case '$(am__configure_deps)' in \
! 791: *$$dep*) \
! 792: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 793: && { if test -f $@; then exit 0; else break; fi; }; \
! 794: exit 1;; \
! 795: esac; \
! 796: done; \
! 797: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/libcurl/opts/Makefile'; \
! 798: $(am__cd) $(top_srcdir) && \
! 799: $(AUTOMAKE) --foreign docs/libcurl/opts/Makefile
! 800: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 801: @case '$?' in \
! 802: *config.status*) \
! 803: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 804: *) \
! 805: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
! 806: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
! 807: esac;
! 808: $(srcdir)/Makefile.inc $(am__empty):
! 809:
! 810: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 811: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 812:
! 813: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
! 814: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 815: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
! 816: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 817: $(am__aclocal_m4_deps):
! 818:
! 819: mostlyclean-libtool:
! 820: -rm -f *.lo
! 821:
! 822: clean-libtool:
! 823: -rm -rf .libs _libs
! 824: install-man3: $(man_MANS)
! 825: @$(NORMAL_INSTALL)
! 826: @list1=''; \
! 827: list2='$(man_MANS)'; \
! 828: test -n "$(man3dir)" \
! 829: && test -n "`echo $$list1$$list2`" \
! 830: || exit 0; \
! 831: echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
! 832: $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
! 833: { for i in $$list1; do echo "$$i"; done; \
! 834: if test -n "$$list2"; then \
! 835: for i in $$list2; do echo "$$i"; done \
! 836: | sed -n '/\.3[a-z]*$$/p'; \
! 837: fi; \
! 838: } | while read p; do \
! 839: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
! 840: echo "$$d$$p"; echo "$$p"; \
! 841: done | \
! 842: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
! 843: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
! 844: sed 'N;N;s,\n, ,g' | { \
! 845: list=; while read file base inst; do \
! 846: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
! 847: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
! 848: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
! 849: fi; \
! 850: done; \
! 851: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
! 852: while read files; do \
! 853: test -z "$$files" || { \
! 854: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
! 855: $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
! 856: done; }
! 857:
! 858: uninstall-man3:
! 859: @$(NORMAL_UNINSTALL)
! 860: @list=''; test -n "$(man3dir)" || exit 0; \
! 861: files=`{ for i in $$list; do echo "$$i"; done; \
! 862: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
! 863: sed -n '/\.3[a-z]*$$/p'; \
! 864: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
! 865: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
! 866: dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
! 867: tags TAGS:
! 868:
! 869: ctags CTAGS:
! 870:
! 871: cscope cscopelist:
! 872:
! 873:
! 874: distdir: $(BUILT_SOURCES)
! 875: $(MAKE) $(AM_MAKEFLAGS) distdir-am
! 876:
! 877: distdir-am: $(DISTFILES)
! 878: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 879: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 880: list='$(DISTFILES)'; \
! 881: dist_files=`for file in $$list; do echo $$file; done | \
! 882: sed -e "s|^$$srcdirstrip/||;t" \
! 883: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 884: case $$dist_files in \
! 885: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 886: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 887: sort -u` ;; \
! 888: esac; \
! 889: for file in $$dist_files; do \
! 890: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 891: if test -d $$d/$$file; then \
! 892: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 893: if test -d "$(distdir)/$$file"; then \
! 894: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 895: fi; \
! 896: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 897: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 898: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 899: fi; \
! 900: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 901: else \
! 902: test -f "$(distdir)/$$file" \
! 903: || cp -p $$d/$$file "$(distdir)/$$file" \
! 904: || exit 1; \
! 905: fi; \
! 906: done
! 907: check-am: all-am
! 908: check: check-am
! 909: all-am: Makefile $(MANS)
! 910: installdirs:
! 911: for dir in "$(DESTDIR)$(man3dir)"; do \
! 912: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
! 913: done
! 914: install: install-am
! 915: install-exec: install-exec-am
! 916: install-data: install-data-am
! 917: uninstall: uninstall-am
! 918:
! 919: install-am: all-am
! 920: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 921:
! 922: installcheck: installcheck-am
! 923: install-strip:
! 924: if test -z '$(STRIP)'; then \
! 925: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 926: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 927: install; \
! 928: else \
! 929: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 930: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 931: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
! 932: fi
! 933: mostlyclean-generic:
! 934:
! 935: clean-generic:
! 936: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
! 937:
! 938: distclean-generic:
! 939: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 940: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
! 941:
! 942: maintainer-clean-generic:
! 943: @echo "This command is intended for maintainers to use"
! 944: @echo "it deletes files that may require special tools to rebuild."
! 945: clean: clean-am
! 946:
! 947: clean-am: clean-generic clean-libtool mostlyclean-am
! 948:
! 949: distclean: distclean-am
! 950: -rm -f Makefile
! 951: distclean-am: clean-am distclean-generic
! 952:
! 953: dvi: dvi-am
! 954:
! 955: dvi-am:
! 956:
! 957: html-am:
! 958:
! 959: info: info-am
! 960:
! 961: info-am:
! 962:
! 963: install-data-am: install-man
! 964:
! 965: install-dvi: install-dvi-am
! 966:
! 967: install-dvi-am:
! 968:
! 969: install-exec-am:
! 970:
! 971: install-html: install-html-am
! 972:
! 973: install-html-am:
! 974:
! 975: install-info: install-info-am
! 976:
! 977: install-info-am:
! 978:
! 979: install-man: install-man3
! 980:
! 981: install-pdf: install-pdf-am
! 982:
! 983: install-pdf-am:
! 984:
! 985: install-ps: install-ps-am
! 986:
! 987: install-ps-am:
! 988:
! 989: installcheck-am:
! 990:
! 991: maintainer-clean: maintainer-clean-am
! 992: -rm -f Makefile
! 993: maintainer-clean-am: distclean-am maintainer-clean-generic
! 994:
! 995: mostlyclean: mostlyclean-am
! 996:
! 997: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 998:
! 999: pdf-am:
! 1000:
! 1001: ps: ps-am
! 1002:
! 1003: ps-am:
! 1004:
! 1005: uninstall-am: uninstall-man
! 1006:
! 1007: uninstall-man: uninstall-man3
! 1008:
! 1009: .MAKE: install-am install-strip
! 1010:
! 1011: .PHONY: all all-am check check-am clean clean-generic clean-libtool \
! 1012: cscopelist-am ctags-am distclean distclean-generic \
! 1013: distclean-libtool distdir dvi dvi-am html html-am info info-am \
! 1014: install install-am install-data install-data-am install-dvi \
! 1015: install-dvi-am install-exec install-exec-am install-html \
! 1016: install-html-am install-info install-info-am install-man \
! 1017: install-man3 install-pdf install-pdf-am install-ps \
! 1018: install-ps-am install-strip installcheck installcheck-am \
! 1019: installdirs maintainer-clean maintainer-clean-generic \
! 1020: mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
! 1021: ps ps-am tags-am uninstall uninstall-am uninstall-man \
! 1022: uninstall-man3
! 1023:
! 1024: .PRECIOUS: Makefile
! 1025:
! 1026:
! 1027: html: $(HTMLPAGES)
! 1028:
! 1029: .3.html:
! 1030: $(MAN2HTML)
! 1031:
! 1032: pdf: $(PDFPAGES)
! 1033:
! 1034: .3.pdf:
! 1035: @(foo=`echo $@ | sed -e 's/\.[0-9]$$//g'`; \
! 1036: groff -Tps -man $< >$$foo.ps; \
! 1037: ps2pdf $$foo.ps $@; \
! 1038: rm $$foo.ps; \
! 1039: echo "converted $< to $@")
! 1040:
! 1041: mancheck:
! 1042: @cd $(top_srcdir)/docs/libcurl/opts && ls `awk -F, '!/OBSOLETE/ && /^ CINIT/ { a=substr($$1, 9); print "CURLOPT_" a ".3"}' $(top_srcdir)/include/curl/curl.h`
! 1043: rm -f in_temp
! 1044: @(for a in $(man_MANS); do echo $$a >>in_temp; done)
! 1045: sort in_temp > in_makefile
! 1046: ls CURL*.3 > in_directory
! 1047: -diff -u in_makefile in_directory
! 1048: rm in_temp in_directory in_makefile
! 1049:
! 1050: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 1051: # Otherwise a system limit (for SysV at least) may be exceeded.
! 1052: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / curl / docs / libcurl / opts