Annotation of embedaddon/curl/docs/libcurl/opts/Makefile.in, revision 1.1.1.1
1.1 misho 1: # Makefile.in generated by automake 1.16.2 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994-2020 Free Software Foundation, Inc.
5:
6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
14:
15: @SET_MAKE@
16:
17: #***************************************************************************
18: # _ _ ____ _
19: # Project ___| | | | _ \| |
20: # / __| | | | |_) | |
21: # | (__| |_| | _ <| |___
22: # \___|\___/|_| \_\_____|
23: #
24: # Copyright (C) 1998 - 2017, Daniel Stenberg, <daniel@haxx.se>, et al.
25: #
26: # This software is licensed as described in the file COPYING, which
27: # you should have received as part of this distribution. The terms
28: # are also available at https://curl.haxx.se/docs/copyright.html.
29: #
30: # You may opt to use, copy, modify, merge, publish, distribute and/or sell
31: # copies of the Software, and permit persons to whom the Software is
32: # furnished to do so, under the terms of the COPYING file.
33: #
34: # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
35: # KIND, either express or implied.
36: #
37: ###########################################################################
38:
39: #***************************************************************************
40: # _ _ ____ _
41: # Project ___| | | | _ \| |
42: # / __| | | | |_) | |
43: # | (__| |_| | _ <| |___
44: # \___|\___/|_| \_\_____|
45: #
46: # Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al.
47: #
48: # This software is licensed as described in the file COPYING, which
49: # you should have received as part of this distribution. The terms
50: # are also available at https://curl.haxx.se/docs/copyright.html.
51: #
52: # You may opt to use, copy, modify, merge, publish, distribute and/or sell
53: # copies of the Software, and permit persons to whom the Software is
54: # furnished to do so, under the terms of the COPYING file.
55: #
56: # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
57: # KIND, either express or implied.
58: #
59: ###########################################################################
60: # Shared between Makefile.am and CMakeLists.txt
61: VPATH = @srcdir@
62: am__is_gnu_make = { \
63: if test -z '$(MAKELEVEL)'; then \
64: false; \
65: elif test -n '$(MAKE_HOST)'; then \
66: true; \
67: elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
68: true; \
69: else \
70: false; \
71: fi; \
72: }
73: am__make_running_with_option = \
74: case $${target_option-} in \
75: ?) ;; \
76: *) echo "am__make_running_with_option: internal error: invalid" \
77: "target option '$${target_option-}' specified" >&2; \
78: exit 1;; \
79: esac; \
80: has_opt=no; \
81: sane_makeflags=$$MAKEFLAGS; \
82: if $(am__is_gnu_make); then \
83: sane_makeflags=$$MFLAGS; \
84: else \
85: case $$MAKEFLAGS in \
86: *\\[\ \ ]*) \
87: bs=\\; \
88: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
89: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
90: esac; \
91: fi; \
92: skip_next=no; \
93: strip_trailopt () \
94: { \
95: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
96: }; \
97: for flg in $$sane_makeflags; do \
98: test $$skip_next = yes && { skip_next=no; continue; }; \
99: case $$flg in \
100: *=*|--*) continue;; \
101: -*I) strip_trailopt 'I'; skip_next=yes;; \
102: -*I?*) strip_trailopt 'I';; \
103: -*O) strip_trailopt 'O'; skip_next=yes;; \
104: -*O?*) strip_trailopt 'O';; \
105: -*l) strip_trailopt 'l'; skip_next=yes;; \
106: -*l?*) strip_trailopt 'l';; \
107: -[dEDm]) skip_next=yes;; \
108: -[JT]) skip_next=yes;; \
109: esac; \
110: case $$flg in \
111: *$$target_option*) has_opt=yes; break;; \
112: esac; \
113: done; \
114: test $$has_opt = yes
115: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
116: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
117: pkgdatadir = $(datadir)/@PACKAGE@
118: pkgincludedir = $(includedir)/@PACKAGE@
119: pkglibdir = $(libdir)/@PACKAGE@
120: pkglibexecdir = $(libexecdir)/@PACKAGE@
121: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
122: install_sh_DATA = $(install_sh) -c -m 644
123: install_sh_PROGRAM = $(install_sh) -c
124: install_sh_SCRIPT = $(install_sh) -c
125: INSTALL_HEADER = $(INSTALL_DATA)
126: transform = $(program_transform_name)
127: NORMAL_INSTALL = :
128: PRE_INSTALL = :
129: POST_INSTALL = :
130: NORMAL_UNINSTALL = :
131: PRE_UNINSTALL = :
132: POST_UNINSTALL = :
133: build_triplet = @build@
134: host_triplet = @host@
135: subdir = docs/libcurl/opts
136: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
137: am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compile_check_sizeof.m4 \
138: $(top_srcdir)/m4/curl-compilers.m4 \
139: $(top_srcdir)/m4/curl-confopts.m4 \
140: $(top_srcdir)/m4/curl-functions.m4 \
141: $(top_srcdir)/m4/curl-openssl.m4 \
142: $(top_srcdir)/m4/curl-override.m4 \
143: $(top_srcdir)/m4/curl-reentrant.m4 $(top_srcdir)/m4/libtool.m4 \
144: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
145: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
146: $(top_srcdir)/m4/xc-am-iface.m4 \
147: $(top_srcdir)/m4/xc-cc-check.m4 \
148: $(top_srcdir)/m4/xc-lt-iface.m4 \
149: $(top_srcdir)/m4/xc-translit.m4 \
150: $(top_srcdir)/m4/xc-val-flgs.m4 \
151: $(top_srcdir)/m4/zz40-xc-ovr.m4 \
152: $(top_srcdir)/m4/zz50-xc-ovr.m4 \
153: $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
154: $(top_srcdir)/configure.ac
155: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
156: $(ACLOCAL_M4)
157: DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
158: mkinstalldirs = $(install_sh) -d
159: CONFIG_HEADER = $(top_builddir)/lib/curl_config.h
160: CONFIG_CLEAN_FILES =
161: CONFIG_CLEAN_VPATH_FILES =
162: AM_V_P = $(am__v_P_@AM_V@)
163: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
164: am__v_P_0 = false
165: am__v_P_1 = :
166: AM_V_GEN = $(am__v_GEN_@AM_V@)
167: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
168: am__v_GEN_0 = @echo " GEN " $@;
169: am__v_GEN_1 =
170: AM_V_at = $(am__v_at_@AM_V@)
171: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
172: am__v_at_0 = @
173: am__v_at_1 =
174: depcomp =
175: am__maybe_remake_depfiles =
176: SOURCES =
177: DIST_SOURCES =
178: am__can_run_installinfo = \
179: case $$AM_UPDATE_INFO_DIR in \
180: n|no|NO) false;; \
181: *) (install-info --version) >/dev/null 2>&1;; \
182: esac
183: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
184: am__vpath_adj = case $$p in \
185: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
186: *) f=$$p;; \
187: esac;
188: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
189: am__install_max = 40
190: am__nobase_strip_setup = \
191: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
192: am__nobase_strip = \
193: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
194: am__nobase_list = $(am__nobase_strip_setup); \
195: for p in $$list; do echo "$$p $$p"; done | \
196: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
197: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
198: if (++n[$$2] == $(am__install_max)) \
199: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
200: END { for (dir in files) print dir, files[dir] }'
201: am__base_list = \
202: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
203: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
204: am__uninstall_files_from_dir = { \
205: test -z "$$files" \
206: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
207: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
208: $(am__cd) "$$dir" && rm -f $$files; }; \
209: }
210: man3dir = $(mandir)/man3
211: am__installdirs = "$(DESTDIR)$(man3dir)"
212: MANS = $(man_MANS)
213: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
214: am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.inc
215: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
216: ACLOCAL = @ACLOCAL@
217: AMTAR = @AMTAR@
218: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
219: AR = @AR@
220: AR_FLAGS = @AR_FLAGS@
221: AS = @AS@
222: AUTOCONF = @AUTOCONF@
223: AUTOHEADER = @AUTOHEADER@
224: AUTOMAKE = @AUTOMAKE@
225: AWK = @AWK@
226: BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
227: CC = @CC@
228: CCDEPMODE = @CCDEPMODE@
229: CFLAGS = @CFLAGS@
230: CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
231: CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
232: CPP = @CPP@
233: CPPFLAGS = @CPPFLAGS@
234: CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
235: CURLVERSION = @CURLVERSION@
236: CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
237: CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
238: CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
239: CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
240: CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
241: CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
242: CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
243: CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
244: CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
245: CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
246: CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
247: CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
248: CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
249: CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
250: CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
251: CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
252: CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
253: CURL_ENABLE_MQTT = @CURL_ENABLE_MQTT@
254: CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
255: CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
256: CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
257: CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@
258: CYGPATH_W = @CYGPATH_W@
259: DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@
260: DEFS = @DEFS@
261: DEPDIR = @DEPDIR@
262: DLLTOOL = @DLLTOOL@
263: DSYMUTIL = @DSYMUTIL@
264: DUMPBIN = @DUMPBIN@
265: ECHO_C = @ECHO_C@
266: ECHO_N = @ECHO_N@
267: ECHO_T = @ECHO_T@
268: EGREP = @EGREP@
269: ENABLE_SHARED = @ENABLE_SHARED@
270: ENABLE_STATIC = @ENABLE_STATIC@
271: EXEEXT = @EXEEXT@
272: FGREP = @FGREP@
273: FISH_FUNCTIONS_DIR = @FISH_FUNCTIONS_DIR@
274: GCOV = @GCOV@
275: GREP = @GREP@
276: HAVE_BROTLI = @HAVE_BROTLI@
277: HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
278: HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
279: HAVE_LIBZ = @HAVE_LIBZ@
280: HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
281: HAVE_PROTO_BSDSOCKET_H = @HAVE_PROTO_BSDSOCKET_H@
282: IDN_ENABLED = @IDN_ENABLED@
283: INSTALL = @INSTALL@
284: INSTALL_DATA = @INSTALL_DATA@
285: INSTALL_PROGRAM = @INSTALL_PROGRAM@
286: INSTALL_SCRIPT = @INSTALL_SCRIPT@
287: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
288: IPV6_ENABLED = @IPV6_ENABLED@
289: LCOV = @LCOV@
290: LD = @LD@
291: LDFLAGS = @LDFLAGS@
292: LIBCURL_LIBS = @LIBCURL_LIBS@
293: LIBMETALINK_CPPFLAGS = @LIBMETALINK_CPPFLAGS@
294: LIBMETALINK_LDFLAGS = @LIBMETALINK_LDFLAGS@
295: LIBMETALINK_LIBS = @LIBMETALINK_LIBS@
296: LIBOBJS = @LIBOBJS@
297: LIBS = @LIBS@
298: LIBTOOL = @LIBTOOL@
299: LIPO = @LIPO@
300: LN_S = @LN_S@
301: LTLIBOBJS = @LTLIBOBJS@
302: LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
303: MAINT = @MAINT@
304: MAKEINFO = @MAKEINFO@
305: MANIFEST_TOOL = @MANIFEST_TOOL@
306: MANOPT = @MANOPT@
307: MKDIR_P = @MKDIR_P@
308: NM = @NM@
309: NMEDIT = @NMEDIT@
310: NROFF = @NROFF@
311: NSS_LIBS = @NSS_LIBS@
312: OBJDUMP = @OBJDUMP@
313: OBJEXT = @OBJEXT@
314: OTOOL = @OTOOL@
315: OTOOL64 = @OTOOL64@
316: PACKAGE = @PACKAGE@
317: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
318: PACKAGE_NAME = @PACKAGE_NAME@
319: PACKAGE_STRING = @PACKAGE_STRING@
320: PACKAGE_TARNAME = @PACKAGE_TARNAME@
321: PACKAGE_URL = @PACKAGE_URL@
322: PACKAGE_VERSION = @PACKAGE_VERSION@
323: PATH_SEPARATOR = @PATH_SEPARATOR@
324: PERL = @PERL@
325: PKGADD_NAME = @PKGADD_NAME@
326: PKGADD_PKG = @PKGADD_PKG@
327: PKGADD_VENDOR = @PKGADD_VENDOR@
328: PKGCONFIG = @PKGCONFIG@
329: RANDOM_FILE = @RANDOM_FILE@
330: RANLIB = @RANLIB@
331: REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
332: SED = @SED@
333: SET_MAKE = @SET_MAKE@
334: SHELL = @SHELL@
335: SSL_BACKENDS = @SSL_BACKENDS@
336: SSL_ENABLED = @SSL_ENABLED@
337: SSL_LIBS = @SSL_LIBS@
338: STRIP = @STRIP@
339: SUPPORT_FEATURES = @SUPPORT_FEATURES@
340: SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
341: USE_ARES = @USE_ARES@
342: USE_BEARSSL = @USE_BEARSSL@
343: USE_GNUTLS = @USE_GNUTLS@
344: USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
345: USE_LIBRTMP = @USE_LIBRTMP@
346: USE_LIBSSH = @USE_LIBSSH@
347: USE_LIBSSH2 = @USE_LIBSSH2@
348: USE_MBEDTLS = @USE_MBEDTLS@
349: USE_MESALINK = @USE_MESALINK@
350: USE_NGHTTP2 = @USE_NGHTTP2@
351: USE_NGHTTP3 = @USE_NGHTTP3@
352: USE_NGTCP2 = @USE_NGTCP2@
353: USE_NGTCP2_CRYPTO_GNUTLS = @USE_NGTCP2_CRYPTO_GNUTLS@
354: USE_NGTCP2_CRYPTO_OPENSSL = @USE_NGTCP2_CRYPTO_OPENSSL@
355: USE_NSS = @USE_NSS@
356: USE_OPENLDAP = @USE_OPENLDAP@
357: USE_QUICHE = @USE_QUICHE@
358: USE_SCHANNEL = @USE_SCHANNEL@
359: USE_SECTRANSP = @USE_SECTRANSP@
360: USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
361: USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
362: USE_WOLFSSH = @USE_WOLFSSH@
363: USE_WOLFSSL = @USE_WOLFSSL@
364: VERSION = @VERSION@
365: VERSIONNUM = @VERSIONNUM@
366: ZLIB_LIBS = @ZLIB_LIBS@
367: ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
368: abs_builddir = @abs_builddir@
369: abs_srcdir = @abs_srcdir@
370: abs_top_builddir = @abs_top_builddir@
371: abs_top_srcdir = @abs_top_srcdir@
372: ac_ct_AR = @ac_ct_AR@
373: ac_ct_CC = @ac_ct_CC@
374: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
375: am__include = @am__include@
376: am__leading_dot = @am__leading_dot@
377: am__quote = @am__quote@
378: am__tar = @am__tar@
379: am__untar = @am__untar@
380: bindir = @bindir@
381: build = @build@
382: build_alias = @build_alias@
383: build_cpu = @build_cpu@
384: build_os = @build_os@
385: build_vendor = @build_vendor@
386: builddir = @builddir@
387: datadir = @datadir@
388: datarootdir = @datarootdir@
389: docdir = @docdir@
390: dvidir = @dvidir@
391: exec_prefix = @exec_prefix@
392: host = @host@
393: host_alias = @host_alias@
394: host_cpu = @host_cpu@
395: host_os = @host_os@
396: host_vendor = @host_vendor@
397: htmldir = @htmldir@
398: includedir = @includedir@
399: infodir = @infodir@
400: install_sh = @install_sh@
401: libdir = @libdir@
402: libexecdir = @libexecdir@
403: libext = @libext@
404: localedir = @localedir@
405: localstatedir = @localstatedir@
406: mandir = @mandir@
407: mkdir_p = @mkdir_p@
408: oldincludedir = @oldincludedir@
409: pdfdir = @pdfdir@
410: prefix = @prefix@
411: program_transform_name = @program_transform_name@
412: psdir = @psdir@
413: runstatedir = @runstatedir@
414: sbindir = @sbindir@
415: sharedstatedir = @sharedstatedir@
416: srcdir = @srcdir@
417: subdirs = @subdirs@
418: sysconfdir = @sysconfdir@
419: target_alias = @target_alias@
420: top_build_prefix = @top_build_prefix@
421: top_builddir = @top_builddir@
422: top_srcdir = @top_srcdir@
423: AUTOMAKE_OPTIONS = foreign no-dependencies
424: man_MANS = \
425: CURLINFO_ACTIVESOCKET.3 \
426: CURLINFO_APPCONNECT_TIME.3 \
427: CURLINFO_APPCONNECT_TIME_T.3 \
428: CURLINFO_CERTINFO.3 \
429: CURLINFO_CONDITION_UNMET.3 \
430: CURLINFO_CONNECT_TIME.3 \
431: CURLINFO_CONNECT_TIME_T.3 \
432: CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 \
433: CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 \
434: CURLINFO_CONTENT_LENGTH_UPLOAD.3 \
435: CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 \
436: CURLINFO_CONTENT_TYPE.3 \
437: CURLINFO_COOKIELIST.3 \
438: CURLINFO_EFFECTIVE_URL.3 \
439: CURLINFO_FILETIME.3 \
440: CURLINFO_FILETIME_T.3 \
441: CURLINFO_FTP_ENTRY_PATH.3 \
442: CURLINFO_HEADER_SIZE.3 \
443: CURLINFO_HTTPAUTH_AVAIL.3 \
444: CURLINFO_HTTP_CONNECTCODE.3 \
445: CURLINFO_HTTP_VERSION.3 \
446: CURLINFO_LASTSOCKET.3 \
447: CURLINFO_LOCAL_IP.3 \
448: CURLINFO_LOCAL_PORT.3 \
449: CURLINFO_NAMELOOKUP_TIME.3 \
450: CURLINFO_NAMELOOKUP_TIME_T.3 \
451: CURLINFO_NUM_CONNECTS.3 \
452: CURLINFO_OS_ERRNO.3 \
453: CURLINFO_PRETRANSFER_TIME.3 \
454: CURLINFO_PRETRANSFER_TIME_T.3 \
455: CURLINFO_PRIMARY_IP.3 \
456: CURLINFO_PRIMARY_PORT.3 \
457: CURLINFO_PRIVATE.3 \
458: CURLINFO_PROTOCOL.3 \
459: CURLINFO_PROXYAUTH_AVAIL.3 \
460: CURLINFO_PROXY_SSL_VERIFYRESULT.3 \
461: CURLINFO_REDIRECT_COUNT.3 \
462: CURLINFO_REDIRECT_TIME.3 \
463: CURLINFO_REDIRECT_TIME_T.3 \
464: CURLINFO_REDIRECT_URL.3 \
465: CURLINFO_REQUEST_SIZE.3 \
466: CURLINFO_RESPONSE_CODE.3 \
467: CURLINFO_RETRY_AFTER.3 \
468: CURLINFO_RTSP_CLIENT_CSEQ.3 \
469: CURLINFO_RTSP_CSEQ_RECV.3 \
470: CURLINFO_RTSP_SERVER_CSEQ.3 \
471: CURLINFO_RTSP_SESSION_ID.3 \
472: CURLINFO_SCHEME.3 \
473: CURLINFO_SIZE_DOWNLOAD.3 \
474: CURLINFO_SIZE_DOWNLOAD_T.3 \
475: CURLINFO_SIZE_UPLOAD.3 \
476: CURLINFO_SIZE_UPLOAD_T.3 \
477: CURLINFO_SPEED_DOWNLOAD.3 \
478: CURLINFO_SPEED_DOWNLOAD_T.3 \
479: CURLINFO_SPEED_UPLOAD.3 \
480: CURLINFO_SPEED_UPLOAD_T.3 \
481: CURLINFO_SSL_ENGINES.3 \
482: CURLINFO_SSL_VERIFYRESULT.3 \
483: CURLINFO_STARTTRANSFER_TIME.3 \
484: CURLINFO_STARTTRANSFER_TIME_T.3 \
485: CURLINFO_TLS_SESSION.3 \
486: CURLINFO_TLS_SSL_PTR.3 \
487: CURLINFO_TOTAL_TIME.3 \
488: CURLINFO_TOTAL_TIME_T.3 \
489: CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE.3 \
490: CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE.3 \
491: CURLMOPT_MAXCONNECTS.3 \
492: CURLMOPT_MAX_CONCURRENT_STREAMS.3 \
493: CURLMOPT_MAX_HOST_CONNECTIONS.3 \
494: CURLMOPT_MAX_PIPELINE_LENGTH.3 \
495: CURLMOPT_MAX_TOTAL_CONNECTIONS.3 \
496: CURLMOPT_PIPELINING.3 \
497: CURLMOPT_PIPELINING_SERVER_BL.3 \
498: CURLMOPT_PIPELINING_SITE_BL.3 \
499: CURLMOPT_PUSHDATA.3 \
500: CURLMOPT_PUSHFUNCTION.3 \
501: CURLMOPT_SOCKETDATA.3 \
502: CURLMOPT_SOCKETFUNCTION.3 \
503: CURLMOPT_TIMERDATA.3 \
504: CURLMOPT_TIMERFUNCTION.3 \
505: CURLOPT_ABSTRACT_UNIX_SOCKET.3 \
506: CURLOPT_ACCEPTTIMEOUT_MS.3 \
507: CURLOPT_ACCEPT_ENCODING.3 \
508: CURLOPT_ADDRESS_SCOPE.3 \
509: CURLOPT_ALTSVC.3 \
510: CURLOPT_ALTSVC_CTRL.3 \
511: CURLOPT_APPEND.3 \
512: CURLOPT_AUTOREFERER.3 \
513: CURLOPT_BUFFERSIZE.3 \
514: CURLOPT_CAINFO.3 \
515: CURLOPT_CAPATH.3 \
516: CURLOPT_CERTINFO.3 \
517: CURLOPT_CHUNK_BGN_FUNCTION.3 \
518: CURLOPT_CHUNK_DATA.3 \
519: CURLOPT_CHUNK_END_FUNCTION.3 \
520: CURLOPT_CLOSESOCKETDATA.3 \
521: CURLOPT_CLOSESOCKETFUNCTION.3 \
522: CURLOPT_CONNECTTIMEOUT.3 \
523: CURLOPT_CONNECTTIMEOUT_MS.3 \
524: CURLOPT_CONNECT_ONLY.3 \
525: CURLOPT_CONNECT_TO.3 \
526: CURLOPT_CONV_FROM_NETWORK_FUNCTION.3 \
527: CURLOPT_CONV_FROM_UTF8_FUNCTION.3 \
528: CURLOPT_CONV_TO_NETWORK_FUNCTION.3 \
529: CURLOPT_COOKIE.3 \
530: CURLOPT_COOKIEFILE.3 \
531: CURLOPT_COOKIEJAR.3 \
532: CURLOPT_COOKIELIST.3 \
533: CURLOPT_COOKIESESSION.3 \
534: CURLOPT_COPYPOSTFIELDS.3 \
535: CURLOPT_CRLF.3 \
536: CURLOPT_CRLFILE.3 \
537: CURLOPT_CURLU.3 \
538: CURLOPT_CUSTOMREQUEST.3 \
539: CURLOPT_DEBUGDATA.3 \
540: CURLOPT_DEBUGFUNCTION.3 \
541: CURLOPT_DEFAULT_PROTOCOL.3 \
542: CURLOPT_DIRLISTONLY.3 \
543: CURLOPT_DISALLOW_USERNAME_IN_URL.3 \
544: CURLOPT_DNS_CACHE_TIMEOUT.3 \
545: CURLOPT_DNS_INTERFACE.3 \
546: CURLOPT_DNS_LOCAL_IP4.3 \
547: CURLOPT_DNS_LOCAL_IP6.3 \
548: CURLOPT_DNS_SERVERS.3 \
549: CURLOPT_DNS_SHUFFLE_ADDRESSES.3 \
550: CURLOPT_DNS_USE_GLOBAL_CACHE.3 \
551: CURLOPT_DOH_URL.3 \
552: CURLOPT_EGDSOCKET.3 \
553: CURLOPT_ERRORBUFFER.3 \
554: CURLOPT_EXPECT_100_TIMEOUT_MS.3 \
555: CURLOPT_FAILONERROR.3 \
556: CURLOPT_FILETIME.3 \
557: CURLOPT_FNMATCH_DATA.3 \
558: CURLOPT_FNMATCH_FUNCTION.3 \
559: CURLOPT_FOLLOWLOCATION.3 \
560: CURLOPT_FORBID_REUSE.3 \
561: CURLOPT_FRESH_CONNECT.3 \
562: CURLOPT_FTPPORT.3 \
563: CURLOPT_FTPSSLAUTH.3 \
564: CURLOPT_FTP_ACCOUNT.3 \
565: CURLOPT_FTP_ALTERNATIVE_TO_USER.3 \
566: CURLOPT_FTP_CREATE_MISSING_DIRS.3 \
567: CURLOPT_FTP_FILEMETHOD.3 \
568: CURLOPT_FTP_RESPONSE_TIMEOUT.3 \
569: CURLOPT_FTP_SKIP_PASV_IP.3 \
570: CURLOPT_FTP_SSL_CCC.3 \
571: CURLOPT_FTP_USE_EPRT.3 \
572: CURLOPT_FTP_USE_EPSV.3 \
573: CURLOPT_FTP_USE_PRET.3 \
574: CURLOPT_GSSAPI_DELEGATION.3 \
575: CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.3 \
576: CURLOPT_HAPROXYPROTOCOL.3 \
577: CURLOPT_HEADER.3 \
578: CURLOPT_HEADERDATA.3 \
579: CURLOPT_HEADERFUNCTION.3 \
580: CURLOPT_HEADEROPT.3 \
581: CURLOPT_HTTP09_ALLOWED.3 \
582: CURLOPT_HTTP200ALIASES.3 \
583: CURLOPT_HTTPAUTH.3 \
584: CURLOPT_HTTPGET.3 \
585: CURLOPT_HTTPHEADER.3 \
586: CURLOPT_HTTPPOST.3 \
587: CURLOPT_HTTPPROXYTUNNEL.3 \
588: CURLOPT_HTTP_CONTENT_DECODING.3 \
589: CURLOPT_HTTP_TRANSFER_DECODING.3 \
590: CURLOPT_HTTP_VERSION.3 \
591: CURLOPT_IGNORE_CONTENT_LENGTH.3 \
592: CURLOPT_INFILESIZE.3 \
593: CURLOPT_INFILESIZE_LARGE.3 \
594: CURLOPT_INTERFACE.3 \
595: CURLOPT_INTERLEAVEDATA.3 \
596: CURLOPT_INTERLEAVEFUNCTION.3 \
597: CURLOPT_IOCTLDATA.3 \
598: CURLOPT_IOCTLFUNCTION.3 \
599: CURLOPT_IPRESOLVE.3 \
600: CURLOPT_ISSUERCERT.3 \
601: CURLOPT_KEEP_SENDING_ON_ERROR.3 \
602: CURLOPT_KEYPASSWD.3 \
603: CURLOPT_KRBLEVEL.3 \
604: CURLOPT_LOCALPORT.3 \
605: CURLOPT_LOCALPORTRANGE.3 \
606: CURLOPT_LOGIN_OPTIONS.3 \
607: CURLOPT_LOW_SPEED_LIMIT.3 \
608: CURLOPT_LOW_SPEED_TIME.3 \
609: CURLOPT_MAIL_AUTH.3 \
610: CURLOPT_MAIL_FROM.3 \
611: CURLOPT_MAIL_RCPT.3 \
612: CURLOPT_MAIL_RCPT_ALLLOWFAILS.3 \
613: CURLOPT_MAXAGE_CONN.3 \
614: CURLOPT_MAXCONNECTS.3 \
615: CURLOPT_MAXFILESIZE.3 \
616: CURLOPT_MAXFILESIZE_LARGE.3 \
617: CURLOPT_MAXREDIRS.3 \
618: CURLOPT_MAX_RECV_SPEED_LARGE.3 \
619: CURLOPT_MAX_SEND_SPEED_LARGE.3 \
620: CURLOPT_MIMEPOST.3 \
621: CURLOPT_NETRC.3 \
622: CURLOPT_NETRC_FILE.3 \
623: CURLOPT_NEW_DIRECTORY_PERMS.3 \
624: CURLOPT_NEW_FILE_PERMS.3 \
625: CURLOPT_NOBODY.3 \
626: CURLOPT_NOPROGRESS.3 \
627: CURLOPT_NOPROXY.3 \
628: CURLOPT_NOSIGNAL.3 \
629: CURLOPT_OPENSOCKETDATA.3 \
630: CURLOPT_OPENSOCKETFUNCTION.3 \
631: CURLOPT_PASSWORD.3 \
632: CURLOPT_PATH_AS_IS.3 \
633: CURLOPT_PINNEDPUBLICKEY.3 \
634: CURLOPT_PIPEWAIT.3 \
635: CURLOPT_PORT.3 \
636: CURLOPT_POST.3 \
637: CURLOPT_POSTFIELDS.3 \
638: CURLOPT_POSTFIELDSIZE.3 \
639: CURLOPT_POSTFIELDSIZE_LARGE.3 \
640: CURLOPT_POSTQUOTE.3 \
641: CURLOPT_POSTREDIR.3 \
642: CURLOPT_PREQUOTE.3 \
643: CURLOPT_PRE_PROXY.3 \
644: CURLOPT_PRIVATE.3 \
645: CURLOPT_PROGRESSDATA.3 \
646: CURLOPT_PROGRESSFUNCTION.3 \
647: CURLOPT_PROTOCOLS.3 \
648: CURLOPT_PROXY.3 \
649: CURLOPT_PROXYAUTH.3 \
650: CURLOPT_PROXYHEADER.3 \
651: CURLOPT_PROXYPASSWORD.3 \
652: CURLOPT_PROXYPORT.3 \
653: CURLOPT_PROXYTYPE.3 \
654: CURLOPT_PROXYUSERNAME.3 \
655: CURLOPT_PROXYUSERPWD.3 \
656: CURLOPT_PROXY_CAINFO.3 \
657: CURLOPT_PROXY_CAPATH.3 \
658: CURLOPT_PROXY_CRLFILE.3 \
659: CURLOPT_PROXY_KEYPASSWD.3 \
660: CURLOPT_PROXY_PINNEDPUBLICKEY.3 \
661: CURLOPT_PROXY_SERVICE_NAME.3 \
662: CURLOPT_PROXY_SSLCERT.3 \
663: CURLOPT_PROXY_SSLCERTTYPE.3 \
664: CURLOPT_PROXY_SSLKEY.3 \
665: CURLOPT_PROXY_SSLKEYTYPE.3 \
666: CURLOPT_PROXY_SSLVERSION.3 \
667: CURLOPT_PROXY_SSL_CIPHER_LIST.3 \
668: CURLOPT_PROXY_SSL_OPTIONS.3 \
669: CURLOPT_PROXY_SSL_VERIFYHOST.3 \
670: CURLOPT_PROXY_SSL_VERIFYPEER.3 \
671: CURLOPT_PROXY_TLS13_CIPHERS.3 \
672: CURLOPT_PROXY_TLSAUTH_PASSWORD.3 \
673: CURLOPT_PROXY_TLSAUTH_TYPE.3 \
674: CURLOPT_PROXY_TLSAUTH_USERNAME.3 \
675: CURLOPT_PROXY_TRANSFER_MODE.3 \
676: CURLOPT_PUT.3 \
677: CURLOPT_QUOTE.3 \
678: CURLOPT_RANDOM_FILE.3 \
679: CURLOPT_RANGE.3 \
680: CURLOPT_READDATA.3 \
681: CURLOPT_READFUNCTION.3 \
682: CURLOPT_REDIR_PROTOCOLS.3 \
683: CURLOPT_REFERER.3 \
684: CURLOPT_REQUEST_TARGET.3 \
685: CURLOPT_RESOLVE.3 \
686: CURLOPT_RESOLVER_START_DATA.3 \
687: CURLOPT_RESOLVER_START_FUNCTION.3 \
688: CURLOPT_RESUME_FROM.3 \
689: CURLOPT_RESUME_FROM_LARGE.3 \
690: CURLOPT_RTSP_CLIENT_CSEQ.3 \
691: CURLOPT_RTSP_REQUEST.3 \
692: CURLOPT_RTSP_SERVER_CSEQ.3 \
693: CURLOPT_RTSP_SESSION_ID.3 \
694: CURLOPT_RTSP_STREAM_URI.3 \
695: CURLOPT_RTSP_TRANSPORT.3 \
696: CURLOPT_SASL_AUTHZID.3 \
697: CURLOPT_SASL_IR.3 \
698: CURLOPT_SEEKDATA.3 \
699: CURLOPT_SEEKFUNCTION.3 \
700: CURLOPT_SERVICE_NAME.3 \
701: CURLOPT_SHARE.3 \
702: CURLOPT_SOCKOPTDATA.3 \
703: CURLOPT_SOCKOPTFUNCTION.3 \
704: CURLOPT_SOCKS5_AUTH.3 \
705: CURLOPT_SOCKS5_GSSAPI_NEC.3 \
706: CURLOPT_SOCKS5_GSSAPI_SERVICE.3 \
707: CURLOPT_SSH_AUTH_TYPES.3 \
708: CURLOPT_SSH_COMPRESSION.3 \
709: CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.3 \
710: CURLOPT_SSH_KEYDATA.3 \
711: CURLOPT_SSH_KEYFUNCTION.3 \
712: CURLOPT_SSH_KNOWNHOSTS.3 \
713: CURLOPT_SSH_PRIVATE_KEYFILE.3 \
714: CURLOPT_SSH_PUBLIC_KEYFILE.3 \
715: CURLOPT_SSLCERT.3 \
716: CURLOPT_SSLCERTTYPE.3 \
717: CURLOPT_SSLENGINE.3 \
718: CURLOPT_SSLENGINE_DEFAULT.3 \
719: CURLOPT_SSLKEY.3 \
720: CURLOPT_SSLKEYTYPE.3 \
721: CURLOPT_SSLVERSION.3 \
722: CURLOPT_SSL_CIPHER_LIST.3 \
723: CURLOPT_SSL_CTX_DATA.3 \
724: CURLOPT_SSL_CTX_FUNCTION.3 \
725: CURLOPT_SSL_ENABLE_ALPN.3 \
726: CURLOPT_SSL_ENABLE_NPN.3 \
727: CURLOPT_SSL_FALSESTART.3 \
728: CURLOPT_SSL_OPTIONS.3 \
729: CURLOPT_SSL_SESSIONID_CACHE.3 \
730: CURLOPT_SSL_VERIFYHOST.3 \
731: CURLOPT_SSL_VERIFYPEER.3 \
732: CURLOPT_SSL_VERIFYSTATUS.3 \
733: CURLOPT_STDERR.3 \
734: CURLOPT_STREAM_DEPENDS.3 \
735: CURLOPT_STREAM_DEPENDS_E.3 \
736: CURLOPT_STREAM_WEIGHT.3 \
737: CURLOPT_SUPPRESS_CONNECT_HEADERS.3 \
738: CURLOPT_TCP_FASTOPEN.3 \
739: CURLOPT_TCP_KEEPALIVE.3 \
740: CURLOPT_TCP_KEEPIDLE.3 \
741: CURLOPT_TCP_KEEPINTVL.3 \
742: CURLOPT_TCP_NODELAY.3 \
743: CURLOPT_TELNETOPTIONS.3 \
744: CURLOPT_TFTP_BLKSIZE.3 \
745: CURLOPT_TFTP_NO_OPTIONS.3 \
746: CURLOPT_TIMECONDITION.3 \
747: CURLOPT_TIMEOUT.3 \
748: CURLOPT_TIMEOUT_MS.3 \
749: CURLOPT_TIMEVALUE.3 \
750: CURLOPT_TIMEVALUE_LARGE.3 \
751: CURLOPT_TLS13_CIPHERS.3 \
752: CURLOPT_TLSAUTH_PASSWORD.3 \
753: CURLOPT_TLSAUTH_TYPE.3 \
754: CURLOPT_TLSAUTH_USERNAME.3 \
755: CURLOPT_TRAILERDATA.3 \
756: CURLOPT_TRAILERFUNCTION.3 \
757: CURLOPT_TRANSFERTEXT.3 \
758: CURLOPT_TRANSFER_ENCODING.3 \
759: CURLOPT_UNIX_SOCKET_PATH.3 \
760: CURLOPT_UNRESTRICTED_AUTH.3 \
761: CURLOPT_UPKEEP_INTERVAL_MS.3 \
762: CURLOPT_UPLOAD.3 \
763: CURLOPT_UPLOAD_BUFFERSIZE.3 \
764: CURLOPT_URL.3 \
765: CURLOPT_USERAGENT.3 \
766: CURLOPT_USERNAME.3 \
767: CURLOPT_USERPWD.3 \
768: CURLOPT_USE_SSL.3 \
769: CURLOPT_VERBOSE.3 \
770: CURLOPT_WILDCARDMATCH.3 \
771: CURLOPT_WRITEDATA.3 \
772: CURLOPT_WRITEFUNCTION.3 \
773: CURLOPT_XFERINFODATA.3 \
774: CURLOPT_XFERINFOFUNCTION.3 \
775: CURLOPT_XOAUTH2_BEARER.3
776:
777: man_DISTMANS = $(man_MANS:.3=.3.dist)
778: HTMLPAGES = $(man_MANS:.3=.html)
779: PDFPAGES = $(man_MANS:.3=.pdf)
780: CLEANFILES = $(HTMLPAGES) $(PDFPAGES) $(man_DISTMANS)
781: EXTRA_DIST = $(man_MANS) CMakeLists.txt
782: MAN2HTML = roffit --mandir=. $< >$@
783: SUFFIXES = .3 .html
784: all: all-am
785:
786: .SUFFIXES:
787: .SUFFIXES: .3 .html .pdf
788: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/Makefile.inc $(am__configure_deps)
789: @for dep in $?; do \
790: case '$(am__configure_deps)' in \
791: *$$dep*) \
792: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
793: && { if test -f $@; then exit 0; else break; fi; }; \
794: exit 1;; \
795: esac; \
796: done; \
797: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/libcurl/opts/Makefile'; \
798: $(am__cd) $(top_srcdir) && \
799: $(AUTOMAKE) --foreign docs/libcurl/opts/Makefile
800: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
801: @case '$?' in \
802: *config.status*) \
803: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
804: *) \
805: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
806: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
807: esac;
808: $(srcdir)/Makefile.inc $(am__empty):
809:
810: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
811: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
812:
813: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
814: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
815: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
816: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
817: $(am__aclocal_m4_deps):
818:
819: mostlyclean-libtool:
820: -rm -f *.lo
821:
822: clean-libtool:
823: -rm -rf .libs _libs
824: install-man3: $(man_MANS)
825: @$(NORMAL_INSTALL)
826: @list1=''; \
827: list2='$(man_MANS)'; \
828: test -n "$(man3dir)" \
829: && test -n "`echo $$list1$$list2`" \
830: || exit 0; \
831: echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
832: $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
833: { for i in $$list1; do echo "$$i"; done; \
834: if test -n "$$list2"; then \
835: for i in $$list2; do echo "$$i"; done \
836: | sed -n '/\.3[a-z]*$$/p'; \
837: fi; \
838: } | while read p; do \
839: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
840: echo "$$d$$p"; echo "$$p"; \
841: done | \
842: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
843: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
844: sed 'N;N;s,\n, ,g' | { \
845: list=; while read file base inst; do \
846: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
847: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
848: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
849: fi; \
850: done; \
851: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
852: while read files; do \
853: test -z "$$files" || { \
854: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
855: $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
856: done; }
857:
858: uninstall-man3:
859: @$(NORMAL_UNINSTALL)
860: @list=''; test -n "$(man3dir)" || exit 0; \
861: files=`{ for i in $$list; do echo "$$i"; done; \
862: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
863: sed -n '/\.3[a-z]*$$/p'; \
864: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
865: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
866: dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
867: tags TAGS:
868:
869: ctags CTAGS:
870:
871: cscope cscopelist:
872:
873:
874: distdir: $(BUILT_SOURCES)
875: $(MAKE) $(AM_MAKEFLAGS) distdir-am
876:
877: distdir-am: $(DISTFILES)
878: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
879: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
880: list='$(DISTFILES)'; \
881: dist_files=`for file in $$list; do echo $$file; done | \
882: sed -e "s|^$$srcdirstrip/||;t" \
883: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
884: case $$dist_files in \
885: */*) $(MKDIR_P) `echo "$$dist_files" | \
886: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
887: sort -u` ;; \
888: esac; \
889: for file in $$dist_files; do \
890: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
891: if test -d $$d/$$file; then \
892: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
893: if test -d "$(distdir)/$$file"; then \
894: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
895: fi; \
896: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
897: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
898: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
899: fi; \
900: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
901: else \
902: test -f "$(distdir)/$$file" \
903: || cp -p $$d/$$file "$(distdir)/$$file" \
904: || exit 1; \
905: fi; \
906: done
907: check-am: all-am
908: check: check-am
909: all-am: Makefile $(MANS)
910: installdirs:
911: for dir in "$(DESTDIR)$(man3dir)"; do \
912: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
913: done
914: install: install-am
915: install-exec: install-exec-am
916: install-data: install-data-am
917: uninstall: uninstall-am
918:
919: install-am: all-am
920: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
921:
922: installcheck: installcheck-am
923: install-strip:
924: if test -z '$(STRIP)'; then \
925: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
926: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
927: install; \
928: else \
929: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
930: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
931: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
932: fi
933: mostlyclean-generic:
934:
935: clean-generic:
936: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
937:
938: distclean-generic:
939: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
940: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
941:
942: maintainer-clean-generic:
943: @echo "This command is intended for maintainers to use"
944: @echo "it deletes files that may require special tools to rebuild."
945: clean: clean-am
946:
947: clean-am: clean-generic clean-libtool mostlyclean-am
948:
949: distclean: distclean-am
950: -rm -f Makefile
951: distclean-am: clean-am distclean-generic
952:
953: dvi: dvi-am
954:
955: dvi-am:
956:
957: html-am:
958:
959: info: info-am
960:
961: info-am:
962:
963: install-data-am: install-man
964:
965: install-dvi: install-dvi-am
966:
967: install-dvi-am:
968:
969: install-exec-am:
970:
971: install-html: install-html-am
972:
973: install-html-am:
974:
975: install-info: install-info-am
976:
977: install-info-am:
978:
979: install-man: install-man3
980:
981: install-pdf: install-pdf-am
982:
983: install-pdf-am:
984:
985: install-ps: install-ps-am
986:
987: install-ps-am:
988:
989: installcheck-am:
990:
991: maintainer-clean: maintainer-clean-am
992: -rm -f Makefile
993: maintainer-clean-am: distclean-am maintainer-clean-generic
994:
995: mostlyclean: mostlyclean-am
996:
997: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
998:
999: pdf-am:
1000:
1001: ps: ps-am
1002:
1003: ps-am:
1004:
1005: uninstall-am: uninstall-man
1006:
1007: uninstall-man: uninstall-man3
1008:
1009: .MAKE: install-am install-strip
1010:
1011: .PHONY: all all-am check check-am clean clean-generic clean-libtool \
1012: cscopelist-am ctags-am distclean distclean-generic \
1013: distclean-libtool distdir dvi dvi-am html html-am info info-am \
1014: install install-am install-data install-data-am install-dvi \
1015: install-dvi-am install-exec install-exec-am install-html \
1016: install-html-am install-info install-info-am install-man \
1017: install-man3 install-pdf install-pdf-am install-ps \
1018: install-ps-am install-strip installcheck installcheck-am \
1019: installdirs maintainer-clean maintainer-clean-generic \
1020: mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
1021: ps ps-am tags-am uninstall uninstall-am uninstall-man \
1022: uninstall-man3
1023:
1024: .PRECIOUS: Makefile
1025:
1026:
1027: html: $(HTMLPAGES)
1028:
1029: .3.html:
1030: $(MAN2HTML)
1031:
1032: pdf: $(PDFPAGES)
1033:
1034: .3.pdf:
1035: @(foo=`echo $@ | sed -e 's/\.[0-9]$$//g'`; \
1036: groff -Tps -man $< >$$foo.ps; \
1037: ps2pdf $$foo.ps $@; \
1038: rm $$foo.ps; \
1039: echo "converted $< to $@")
1040:
1041: mancheck:
1042: @cd $(top_srcdir)/docs/libcurl/opts && ls `awk -F, '!/OBSOLETE/ && /^ CINIT/ { a=substr($$1, 9); print "CURLOPT_" a ".3"}' $(top_srcdir)/include/curl/curl.h`
1043: rm -f in_temp
1044: @(for a in $(man_MANS); do echo $$a >>in_temp; done)
1045: sort in_temp > in_makefile
1046: ls CURL*.3 > in_directory
1047: -diff -u in_makefile in_directory
1048: rm in_temp in_directory in_makefile
1049:
1050: # Tell versions [3.59,3.63) of GNU make to not export all variables.
1051: # Otherwise a system limit (for SysV at least) may be exceeded.
1052: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / curl / docs / libcurl / opts