Annotation of embedaddon/dhcdrop/man/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.10.2 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
! 5: # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
! 6: # This Makefile.in is free software; the Free Software Foundation
! 7: # gives unlimited permission to copy and/or distribute it,
! 8: # with or without modifications, as long as this notice is preserved.
! 9:
! 10: # This program is distributed in the hope that it will be useful,
! 11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 13: # PARTICULAR PURPOSE.
! 14:
! 15: @SET_MAKE@
! 16: VPATH = @srcdir@
! 17: pkgdatadir = $(datadir)/@PACKAGE@
! 18: pkglibdir = $(libdir)/@PACKAGE@
! 19: pkgincludedir = $(includedir)/@PACKAGE@
! 20: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 21: install_sh_DATA = $(install_sh) -c -m 644
! 22: install_sh_PROGRAM = $(install_sh) -c
! 23: install_sh_SCRIPT = $(install_sh) -c
! 24: INSTALL_HEADER = $(INSTALL_DATA)
! 25: transform = $(program_transform_name)
! 26: NORMAL_INSTALL = :
! 27: PRE_INSTALL = :
! 28: POST_INSTALL = :
! 29: NORMAL_UNINSTALL = :
! 30: PRE_UNINSTALL = :
! 31: POST_UNINSTALL = :
! 32: build_triplet = @build@
! 33: host_triplet = @host@
! 34: target_triplet = @target@
! 35: subdir = man
! 36: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
! 37: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 38: am__aclocal_m4_deps = $(top_srcdir)/configure.ac
! 39: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 40: $(ACLOCAL_M4)
! 41: mkinstalldirs = $(install_sh) -d
! 42: CONFIG_HEADER = $(top_builddir)/config.h
! 43: CONFIG_CLEAN_FILES =
! 44: SOURCES =
! 45: DIST_SOURCES =
! 46: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
! 47: html-recursive info-recursive install-data-recursive \
! 48: install-dvi-recursive install-exec-recursive \
! 49: install-html-recursive install-info-recursive \
! 50: install-pdf-recursive install-ps-recursive install-recursive \
! 51: installcheck-recursive installdirs-recursive pdf-recursive \
! 52: ps-recursive uninstall-recursive
! 53: man8dir = $(mandir)/man8
! 54: am__installdirs = "$(DESTDIR)$(man8dir)"
! 55: NROFF = nroff
! 56: MANS = $(man_MANS)
! 57: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
! 58: distclean-recursive maintainer-clean-recursive
! 59: ETAGS = etags
! 60: CTAGS = ctags
! 61: DIST_SUBDIRS = $(SUBDIRS)
! 62: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 63: ACLOCAL = @ACLOCAL@
! 64: AMTAR = @AMTAR@
! 65: AR = @AR@
! 66: AUTOCONF = @AUTOCONF@
! 67: AUTOHEADER = @AUTOHEADER@
! 68: AUTOMAKE = @AUTOMAKE@
! 69: AWK = @AWK@
! 70: CC = @CC@
! 71: CCDEPMODE = @CCDEPMODE@
! 72: CFLAGS = @CFLAGS@
! 73: CPP = @CPP@
! 74: CPPFLAGS = @CPPFLAGS@
! 75: CXX = @CXX@
! 76: CXXCPP = @CXXCPP@
! 77: CXXDEPMODE = @CXXDEPMODE@
! 78: CXXFLAGS = @CXXFLAGS@
! 79: CYGPATH_W = @CYGPATH_W@
! 80: DEFS = @DEFS@
! 81: DEPDIR = @DEPDIR@
! 82: DSYMUTIL = @DSYMUTIL@
! 83: ECHO = @ECHO@
! 84: ECHO_C = @ECHO_C@
! 85: ECHO_N = @ECHO_N@
! 86: ECHO_T = @ECHO_T@
! 87: EGREP = @EGREP@
! 88: EXEEXT = @EXEEXT@
! 89: F77 = @F77@
! 90: FFLAGS = @FFLAGS@
! 91: GREP = @GREP@
! 92: INSTALL = @INSTALL@
! 93: INSTALL_DATA = @INSTALL_DATA@
! 94: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 95: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 96: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 97: LDFLAGS = @LDFLAGS@
! 98: LIBOBJS = @LIBOBJS@
! 99: LIBS = @LIBS@
! 100: LIBTOOL = @LIBTOOL@
! 101: LN_S = @LN_S@
! 102: LTLIBOBJS = @LTLIBOBJS@
! 103: MAKEINFO = @MAKEINFO@
! 104: MKDIR_P = @MKDIR_P@
! 105: NMEDIT = @NMEDIT@
! 106: OBJEXT = @OBJEXT@
! 107: PACKAGE = @PACKAGE@
! 108: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 109: PACKAGE_NAME = @PACKAGE_NAME@
! 110: PACKAGE_STRING = @PACKAGE_STRING@
! 111: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 112: PACKAGE_VERSION = @PACKAGE_VERSION@
! 113: PATH_SEPARATOR = @PATH_SEPARATOR@
! 114: RANLIB = @RANLIB@
! 115: SED = @SED@
! 116: SET_MAKE = @SET_MAKE@
! 117: SHELL = @SHELL@
! 118: STRIP = @STRIP@
! 119: VERSION = @VERSION@
! 120: abs_builddir = @abs_builddir@
! 121: abs_srcdir = @abs_srcdir@
! 122: abs_top_builddir = @abs_top_builddir@
! 123: abs_top_srcdir = @abs_top_srcdir@
! 124: ac_ct_CC = @ac_ct_CC@
! 125: ac_ct_CXX = @ac_ct_CXX@
! 126: ac_ct_F77 = @ac_ct_F77@
! 127: am__include = @am__include@
! 128: am__leading_dot = @am__leading_dot@
! 129: am__quote = @am__quote@
! 130: am__tar = @am__tar@
! 131: am__untar = @am__untar@
! 132: bindir = @bindir@
! 133: build = @build@
! 134: build_alias = @build_alias@
! 135: build_cpu = @build_cpu@
! 136: build_os = @build_os@
! 137: build_vendor = @build_vendor@
! 138: builddir = @builddir@
! 139: datadir = @datadir@
! 140: datarootdir = @datarootdir@
! 141: docdir = @docdir@
! 142: dvidir = @dvidir@
! 143: exec_prefix = @exec_prefix@
! 144: host = @host@
! 145: host_alias = @host_alias@
! 146: host_cpu = @host_cpu@
! 147: host_os = @host_os@
! 148: host_vendor = @host_vendor@
! 149: htmldir = @htmldir@
! 150: includedir = @includedir@
! 151: infodir = @infodir@
! 152: install_sh = @install_sh@
! 153: libdir = @libdir@
! 154: libexecdir = @libexecdir@
! 155: localedir = @localedir@
! 156: localstatedir = @localstatedir@
! 157: mandir = @mandir@
! 158: mkdir_p = @mkdir_p@
! 159: oldincludedir = @oldincludedir@
! 160: pdfdir = @pdfdir@
! 161: prefix = @prefix@
! 162: program_transform_name = @program_transform_name@
! 163: psdir = @psdir@
! 164: sbindir = @sbindir@
! 165: sharedstatedir = @sharedstatedir@
! 166: srcdir = @srcdir@
! 167: sysconfdir = @sysconfdir@
! 168: target = @target@
! 169: target_alias = @target_alias@
! 170: target_cpu = @target_cpu@
! 171: target_os = @target_os@
! 172: target_vendor = @target_vendor@
! 173: top_build_prefix = @top_build_prefix@
! 174: top_builddir = @top_builddir@
! 175: top_srcdir = @top_srcdir@
! 176: man_MANS = dhcdrop.8
! 177: EXTRA_DIST = $(man_MANS)
! 178: SUBDIRS = ru
! 179: all: all-recursive
! 180:
! 181: .SUFFIXES:
! 182: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
! 183: @for dep in $?; do \
! 184: case '$(am__configure_deps)' in \
! 185: *$$dep*) \
! 186: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 187: && { if test -f $@; then exit 0; else break; fi; }; \
! 188: exit 1;; \
! 189: esac; \
! 190: done; \
! 191: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
! 192: cd $(top_srcdir) && \
! 193: $(AUTOMAKE) --gnu man/Makefile
! 194: .PRECIOUS: Makefile
! 195: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 196: @case '$?' in \
! 197: *config.status*) \
! 198: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 199: *) \
! 200: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 201: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 202: esac;
! 203:
! 204: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 205: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 206:
! 207: $(top_srcdir)/configure: $(am__configure_deps)
! 208: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 209: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
! 210: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 211:
! 212: mostlyclean-libtool:
! 213: -rm -f *.lo
! 214:
! 215: clean-libtool:
! 216: -rm -rf .libs _libs
! 217: install-man8: $(man8_MANS) $(man_MANS)
! 218: @$(NORMAL_INSTALL)
! 219: test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
! 220: @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
! 221: l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
! 222: for i in $$l2; do \
! 223: case "$$i" in \
! 224: *.8*) list="$$list $$i" ;; \
! 225: esac; \
! 226: done; \
! 227: for i in $$list; do \
! 228: if test -f $$i; then file=$$i; \
! 229: else file=$(srcdir)/$$i; fi; \
! 230: ext=`echo $$i | sed -e 's/^.*\\.//'`; \
! 231: case "$$ext" in \
! 232: 8*) ;; \
! 233: *) ext='8' ;; \
! 234: esac; \
! 235: inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
! 236: inst=`echo $$inst | sed -e 's/^.*\///'`; \
! 237: inst=`echo $$inst | sed '$(transform)'`.$$ext; \
! 238: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
! 239: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
! 240: done
! 241: uninstall-man8:
! 242: @$(NORMAL_UNINSTALL)
! 243: @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
! 244: l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
! 245: for i in $$l2; do \
! 246: case "$$i" in \
! 247: *.8*) list="$$list $$i" ;; \
! 248: esac; \
! 249: done; \
! 250: for i in $$list; do \
! 251: ext=`echo $$i | sed -e 's/^.*\\.//'`; \
! 252: case "$$ext" in \
! 253: 8*) ;; \
! 254: *) ext='8' ;; \
! 255: esac; \
! 256: inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
! 257: inst=`echo $$inst | sed -e 's/^.*\///'`; \
! 258: inst=`echo $$inst | sed '$(transform)'`.$$ext; \
! 259: echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
! 260: rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
! 261: done
! 262:
! 263: # This directory's subdirectories are mostly independent; you can cd
! 264: # into them and run `make' without going through this Makefile.
! 265: # To change the values of `make' variables: instead of editing Makefiles,
! 266: # (1) if the variable is set in `config.status', edit `config.status'
! 267: # (which will cause the Makefiles to be regenerated when you run `make');
! 268: # (2) otherwise, pass the desired values on the `make' command line.
! 269: $(RECURSIVE_TARGETS):
! 270: @failcom='exit 1'; \
! 271: for f in x $$MAKEFLAGS; do \
! 272: case $$f in \
! 273: *=* | --[!k]*);; \
! 274: *k*) failcom='fail=yes';; \
! 275: esac; \
! 276: done; \
! 277: dot_seen=no; \
! 278: target=`echo $@ | sed s/-recursive//`; \
! 279: list='$(SUBDIRS)'; for subdir in $$list; do \
! 280: echo "Making $$target in $$subdir"; \
! 281: if test "$$subdir" = "."; then \
! 282: dot_seen=yes; \
! 283: local_target="$$target-am"; \
! 284: else \
! 285: local_target="$$target"; \
! 286: fi; \
! 287: (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 288: || eval $$failcom; \
! 289: done; \
! 290: if test "$$dot_seen" = "no"; then \
! 291: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
! 292: fi; test -z "$$fail"
! 293:
! 294: $(RECURSIVE_CLEAN_TARGETS):
! 295: @failcom='exit 1'; \
! 296: for f in x $$MAKEFLAGS; do \
! 297: case $$f in \
! 298: *=* | --[!k]*);; \
! 299: *k*) failcom='fail=yes';; \
! 300: esac; \
! 301: done; \
! 302: dot_seen=no; \
! 303: case "$@" in \
! 304: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! 305: *) list='$(SUBDIRS)' ;; \
! 306: esac; \
! 307: rev=''; for subdir in $$list; do \
! 308: if test "$$subdir" = "."; then :; else \
! 309: rev="$$subdir $$rev"; \
! 310: fi; \
! 311: done; \
! 312: rev="$$rev ."; \
! 313: target=`echo $@ | sed s/-recursive//`; \
! 314: for subdir in $$rev; do \
! 315: echo "Making $$target in $$subdir"; \
! 316: if test "$$subdir" = "."; then \
! 317: local_target="$$target-am"; \
! 318: else \
! 319: local_target="$$target"; \
! 320: fi; \
! 321: (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 322: || eval $$failcom; \
! 323: done && test -z "$$fail"
! 324: tags-recursive:
! 325: list='$(SUBDIRS)'; for subdir in $$list; do \
! 326: test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
! 327: done
! 328: ctags-recursive:
! 329: list='$(SUBDIRS)'; for subdir in $$list; do \
! 330: test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
! 331: done
! 332:
! 333: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
! 334: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 335: unique=`for i in $$list; do \
! 336: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 337: done | \
! 338: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 339: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 340: mkid -fID $$unique
! 341: tags: TAGS
! 342:
! 343: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! 344: $(TAGS_FILES) $(LISP)
! 345: tags=; \
! 346: here=`pwd`; \
! 347: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
! 348: include_option=--etags-include; \
! 349: empty_fix=.; \
! 350: else \
! 351: include_option=--include; \
! 352: empty_fix=; \
! 353: fi; \
! 354: list='$(SUBDIRS)'; for subdir in $$list; do \
! 355: if test "$$subdir" = .; then :; else \
! 356: test ! -f $$subdir/TAGS || \
! 357: tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
! 358: fi; \
! 359: done; \
! 360: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 361: unique=`for i in $$list; do \
! 362: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 363: done | \
! 364: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 365: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 366: if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
! 367: test -n "$$unique" || unique=$$empty_fix; \
! 368: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 369: $$tags $$unique; \
! 370: fi
! 371: ctags: CTAGS
! 372: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! 373: $(TAGS_FILES) $(LISP)
! 374: tags=; \
! 375: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 376: unique=`for i in $$list; do \
! 377: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 378: done | \
! 379: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 380: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 381: test -z "$(CTAGS_ARGS)$$tags$$unique" \
! 382: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
! 383: $$tags $$unique
! 384:
! 385: GTAGS:
! 386: here=`$(am__cd) $(top_builddir) && pwd` \
! 387: && cd $(top_srcdir) \
! 388: && gtags -i $(GTAGS_ARGS) $$here
! 389:
! 390: distclean-tags:
! 391: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
! 392:
! 393: distdir: $(DISTFILES)
! 394: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 395: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 396: list='$(DISTFILES)'; \
! 397: dist_files=`for file in $$list; do echo $$file; done | \
! 398: sed -e "s|^$$srcdirstrip/||;t" \
! 399: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 400: case $$dist_files in \
! 401: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 402: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 403: sort -u` ;; \
! 404: esac; \
! 405: for file in $$dist_files; do \
! 406: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 407: if test -d $$d/$$file; then \
! 408: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 409: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 410: cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
! 411: fi; \
! 412: cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
! 413: else \
! 414: test -f $(distdir)/$$file \
! 415: || cp -p $$d/$$file $(distdir)/$$file \
! 416: || exit 1; \
! 417: fi; \
! 418: done
! 419: list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 420: if test "$$subdir" = .; then :; else \
! 421: test -d "$(distdir)/$$subdir" \
! 422: || $(MKDIR_P) "$(distdir)/$$subdir" \
! 423: || exit 1; \
! 424: distdir=`$(am__cd) $(distdir) && pwd`; \
! 425: top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
! 426: (cd $$subdir && \
! 427: $(MAKE) $(AM_MAKEFLAGS) \
! 428: top_distdir="$$top_distdir" \
! 429: distdir="$$distdir/$$subdir" \
! 430: am__remove_distdir=: \
! 431: am__skip_length_check=: \
! 432: distdir) \
! 433: || exit 1; \
! 434: fi; \
! 435: done
! 436: check-am: all-am
! 437: check: check-recursive
! 438: all-am: Makefile $(MANS)
! 439: installdirs: installdirs-recursive
! 440: installdirs-am:
! 441: for dir in "$(DESTDIR)$(man8dir)"; do \
! 442: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
! 443: done
! 444: install: install-recursive
! 445: install-exec: install-exec-recursive
! 446: install-data: install-data-recursive
! 447: uninstall: uninstall-recursive
! 448:
! 449: install-am: all-am
! 450: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 451:
! 452: installcheck: installcheck-recursive
! 453: install-strip:
! 454: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 455: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 456: `test -z '$(STRIP)' || \
! 457: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
! 458: mostlyclean-generic:
! 459:
! 460: clean-generic:
! 461:
! 462: distclean-generic:
! 463: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 464:
! 465: maintainer-clean-generic:
! 466: @echo "This command is intended for maintainers to use"
! 467: @echo "it deletes files that may require special tools to rebuild."
! 468: clean: clean-recursive
! 469:
! 470: clean-am: clean-generic clean-libtool mostlyclean-am
! 471:
! 472: distclean: distclean-recursive
! 473: -rm -f Makefile
! 474: distclean-am: clean-am distclean-generic distclean-tags
! 475:
! 476: dvi: dvi-recursive
! 477:
! 478: dvi-am:
! 479:
! 480: html: html-recursive
! 481:
! 482: info: info-recursive
! 483:
! 484: info-am:
! 485:
! 486: install-data-am: install-man
! 487:
! 488: install-dvi: install-dvi-recursive
! 489:
! 490: install-exec-am:
! 491:
! 492: install-html: install-html-recursive
! 493:
! 494: install-info: install-info-recursive
! 495:
! 496: install-man: install-man8
! 497:
! 498: install-pdf: install-pdf-recursive
! 499:
! 500: install-ps: install-ps-recursive
! 501:
! 502: installcheck-am:
! 503:
! 504: maintainer-clean: maintainer-clean-recursive
! 505: -rm -f Makefile
! 506: maintainer-clean-am: distclean-am maintainer-clean-generic
! 507:
! 508: mostlyclean: mostlyclean-recursive
! 509:
! 510: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 511:
! 512: pdf: pdf-recursive
! 513:
! 514: pdf-am:
! 515:
! 516: ps: ps-recursive
! 517:
! 518: ps-am:
! 519:
! 520: uninstall-am: uninstall-man
! 521:
! 522: uninstall-man: uninstall-man8
! 523:
! 524: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
! 525: install-strip
! 526:
! 527: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
! 528: all all-am check check-am clean clean-generic clean-libtool \
! 529: ctags ctags-recursive distclean distclean-generic \
! 530: distclean-libtool distclean-tags distdir dvi dvi-am html \
! 531: html-am info info-am install install-am install-data \
! 532: install-data-am install-dvi install-dvi-am install-exec \
! 533: install-exec-am install-html install-html-am install-info \
! 534: install-info-am install-man install-man8 install-pdf \
! 535: install-pdf-am install-ps install-ps-am install-strip \
! 536: installcheck installcheck-am installdirs installdirs-am \
! 537: maintainer-clean maintainer-clean-generic mostlyclean \
! 538: mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
! 539: tags tags-recursive uninstall uninstall-am uninstall-man \
! 540: uninstall-man8
! 541:
! 542: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 543: # Otherwise a system limit (for SysV at least) may be exceeded.
! 544: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>