Annotation of embedaddon/dhcdrop/man/Makefile.in, revision 1.1.1.1
1.1 misho 1: # Makefile.in generated by automake 1.10.2 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
14:
15: @SET_MAKE@
16: VPATH = @srcdir@
17: pkgdatadir = $(datadir)/@PACKAGE@
18: pkglibdir = $(libdir)/@PACKAGE@
19: pkgincludedir = $(includedir)/@PACKAGE@
20: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
21: install_sh_DATA = $(install_sh) -c -m 644
22: install_sh_PROGRAM = $(install_sh) -c
23: install_sh_SCRIPT = $(install_sh) -c
24: INSTALL_HEADER = $(INSTALL_DATA)
25: transform = $(program_transform_name)
26: NORMAL_INSTALL = :
27: PRE_INSTALL = :
28: POST_INSTALL = :
29: NORMAL_UNINSTALL = :
30: PRE_UNINSTALL = :
31: POST_UNINSTALL = :
32: build_triplet = @build@
33: host_triplet = @host@
34: target_triplet = @target@
35: subdir = man
36: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
37: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
38: am__aclocal_m4_deps = $(top_srcdir)/configure.ac
39: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
40: $(ACLOCAL_M4)
41: mkinstalldirs = $(install_sh) -d
42: CONFIG_HEADER = $(top_builddir)/config.h
43: CONFIG_CLEAN_FILES =
44: SOURCES =
45: DIST_SOURCES =
46: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
47: html-recursive info-recursive install-data-recursive \
48: install-dvi-recursive install-exec-recursive \
49: install-html-recursive install-info-recursive \
50: install-pdf-recursive install-ps-recursive install-recursive \
51: installcheck-recursive installdirs-recursive pdf-recursive \
52: ps-recursive uninstall-recursive
53: man8dir = $(mandir)/man8
54: am__installdirs = "$(DESTDIR)$(man8dir)"
55: NROFF = nroff
56: MANS = $(man_MANS)
57: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
58: distclean-recursive maintainer-clean-recursive
59: ETAGS = etags
60: CTAGS = ctags
61: DIST_SUBDIRS = $(SUBDIRS)
62: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
63: ACLOCAL = @ACLOCAL@
64: AMTAR = @AMTAR@
65: AR = @AR@
66: AUTOCONF = @AUTOCONF@
67: AUTOHEADER = @AUTOHEADER@
68: AUTOMAKE = @AUTOMAKE@
69: AWK = @AWK@
70: CC = @CC@
71: CCDEPMODE = @CCDEPMODE@
72: CFLAGS = @CFLAGS@
73: CPP = @CPP@
74: CPPFLAGS = @CPPFLAGS@
75: CXX = @CXX@
76: CXXCPP = @CXXCPP@
77: CXXDEPMODE = @CXXDEPMODE@
78: CXXFLAGS = @CXXFLAGS@
79: CYGPATH_W = @CYGPATH_W@
80: DEFS = @DEFS@
81: DEPDIR = @DEPDIR@
82: DSYMUTIL = @DSYMUTIL@
83: ECHO = @ECHO@
84: ECHO_C = @ECHO_C@
85: ECHO_N = @ECHO_N@
86: ECHO_T = @ECHO_T@
87: EGREP = @EGREP@
88: EXEEXT = @EXEEXT@
89: F77 = @F77@
90: FFLAGS = @FFLAGS@
91: GREP = @GREP@
92: INSTALL = @INSTALL@
93: INSTALL_DATA = @INSTALL_DATA@
94: INSTALL_PROGRAM = @INSTALL_PROGRAM@
95: INSTALL_SCRIPT = @INSTALL_SCRIPT@
96: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
97: LDFLAGS = @LDFLAGS@
98: LIBOBJS = @LIBOBJS@
99: LIBS = @LIBS@
100: LIBTOOL = @LIBTOOL@
101: LN_S = @LN_S@
102: LTLIBOBJS = @LTLIBOBJS@
103: MAKEINFO = @MAKEINFO@
104: MKDIR_P = @MKDIR_P@
105: NMEDIT = @NMEDIT@
106: OBJEXT = @OBJEXT@
107: PACKAGE = @PACKAGE@
108: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
109: PACKAGE_NAME = @PACKAGE_NAME@
110: PACKAGE_STRING = @PACKAGE_STRING@
111: PACKAGE_TARNAME = @PACKAGE_TARNAME@
112: PACKAGE_VERSION = @PACKAGE_VERSION@
113: PATH_SEPARATOR = @PATH_SEPARATOR@
114: RANLIB = @RANLIB@
115: SED = @SED@
116: SET_MAKE = @SET_MAKE@
117: SHELL = @SHELL@
118: STRIP = @STRIP@
119: VERSION = @VERSION@
120: abs_builddir = @abs_builddir@
121: abs_srcdir = @abs_srcdir@
122: abs_top_builddir = @abs_top_builddir@
123: abs_top_srcdir = @abs_top_srcdir@
124: ac_ct_CC = @ac_ct_CC@
125: ac_ct_CXX = @ac_ct_CXX@
126: ac_ct_F77 = @ac_ct_F77@
127: am__include = @am__include@
128: am__leading_dot = @am__leading_dot@
129: am__quote = @am__quote@
130: am__tar = @am__tar@
131: am__untar = @am__untar@
132: bindir = @bindir@
133: build = @build@
134: build_alias = @build_alias@
135: build_cpu = @build_cpu@
136: build_os = @build_os@
137: build_vendor = @build_vendor@
138: builddir = @builddir@
139: datadir = @datadir@
140: datarootdir = @datarootdir@
141: docdir = @docdir@
142: dvidir = @dvidir@
143: exec_prefix = @exec_prefix@
144: host = @host@
145: host_alias = @host_alias@
146: host_cpu = @host_cpu@
147: host_os = @host_os@
148: host_vendor = @host_vendor@
149: htmldir = @htmldir@
150: includedir = @includedir@
151: infodir = @infodir@
152: install_sh = @install_sh@
153: libdir = @libdir@
154: libexecdir = @libexecdir@
155: localedir = @localedir@
156: localstatedir = @localstatedir@
157: mandir = @mandir@
158: mkdir_p = @mkdir_p@
159: oldincludedir = @oldincludedir@
160: pdfdir = @pdfdir@
161: prefix = @prefix@
162: program_transform_name = @program_transform_name@
163: psdir = @psdir@
164: sbindir = @sbindir@
165: sharedstatedir = @sharedstatedir@
166: srcdir = @srcdir@
167: sysconfdir = @sysconfdir@
168: target = @target@
169: target_alias = @target_alias@
170: target_cpu = @target_cpu@
171: target_os = @target_os@
172: target_vendor = @target_vendor@
173: top_build_prefix = @top_build_prefix@
174: top_builddir = @top_builddir@
175: top_srcdir = @top_srcdir@
176: man_MANS = dhcdrop.8
177: EXTRA_DIST = $(man_MANS)
178: SUBDIRS = ru
179: all: all-recursive
180:
181: .SUFFIXES:
182: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
183: @for dep in $?; do \
184: case '$(am__configure_deps)' in \
185: *$$dep*) \
186: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
187: && { if test -f $@; then exit 0; else break; fi; }; \
188: exit 1;; \
189: esac; \
190: done; \
191: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
192: cd $(top_srcdir) && \
193: $(AUTOMAKE) --gnu man/Makefile
194: .PRECIOUS: Makefile
195: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
196: @case '$?' in \
197: *config.status*) \
198: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
199: *) \
200: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
201: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
202: esac;
203:
204: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
205: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
206:
207: $(top_srcdir)/configure: $(am__configure_deps)
208: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
209: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
210: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
211:
212: mostlyclean-libtool:
213: -rm -f *.lo
214:
215: clean-libtool:
216: -rm -rf .libs _libs
217: install-man8: $(man8_MANS) $(man_MANS)
218: @$(NORMAL_INSTALL)
219: test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
220: @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
221: l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
222: for i in $$l2; do \
223: case "$$i" in \
224: *.8*) list="$$list $$i" ;; \
225: esac; \
226: done; \
227: for i in $$list; do \
228: if test -f $$i; then file=$$i; \
229: else file=$(srcdir)/$$i; fi; \
230: ext=`echo $$i | sed -e 's/^.*\\.//'`; \
231: case "$$ext" in \
232: 8*) ;; \
233: *) ext='8' ;; \
234: esac; \
235: inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
236: inst=`echo $$inst | sed -e 's/^.*\///'`; \
237: inst=`echo $$inst | sed '$(transform)'`.$$ext; \
238: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
239: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
240: done
241: uninstall-man8:
242: @$(NORMAL_UNINSTALL)
243: @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
244: l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
245: for i in $$l2; do \
246: case "$$i" in \
247: *.8*) list="$$list $$i" ;; \
248: esac; \
249: done; \
250: for i in $$list; do \
251: ext=`echo $$i | sed -e 's/^.*\\.//'`; \
252: case "$$ext" in \
253: 8*) ;; \
254: *) ext='8' ;; \
255: esac; \
256: inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
257: inst=`echo $$inst | sed -e 's/^.*\///'`; \
258: inst=`echo $$inst | sed '$(transform)'`.$$ext; \
259: echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
260: rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
261: done
262:
263: # This directory's subdirectories are mostly independent; you can cd
264: # into them and run `make' without going through this Makefile.
265: # To change the values of `make' variables: instead of editing Makefiles,
266: # (1) if the variable is set in `config.status', edit `config.status'
267: # (which will cause the Makefiles to be regenerated when you run `make');
268: # (2) otherwise, pass the desired values on the `make' command line.
269: $(RECURSIVE_TARGETS):
270: @failcom='exit 1'; \
271: for f in x $$MAKEFLAGS; do \
272: case $$f in \
273: *=* | --[!k]*);; \
274: *k*) failcom='fail=yes';; \
275: esac; \
276: done; \
277: dot_seen=no; \
278: target=`echo $@ | sed s/-recursive//`; \
279: list='$(SUBDIRS)'; for subdir in $$list; do \
280: echo "Making $$target in $$subdir"; \
281: if test "$$subdir" = "."; then \
282: dot_seen=yes; \
283: local_target="$$target-am"; \
284: else \
285: local_target="$$target"; \
286: fi; \
287: (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
288: || eval $$failcom; \
289: done; \
290: if test "$$dot_seen" = "no"; then \
291: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
292: fi; test -z "$$fail"
293:
294: $(RECURSIVE_CLEAN_TARGETS):
295: @failcom='exit 1'; \
296: for f in x $$MAKEFLAGS; do \
297: case $$f in \
298: *=* | --[!k]*);; \
299: *k*) failcom='fail=yes';; \
300: esac; \
301: done; \
302: dot_seen=no; \
303: case "$@" in \
304: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
305: *) list='$(SUBDIRS)' ;; \
306: esac; \
307: rev=''; for subdir in $$list; do \
308: if test "$$subdir" = "."; then :; else \
309: rev="$$subdir $$rev"; \
310: fi; \
311: done; \
312: rev="$$rev ."; \
313: target=`echo $@ | sed s/-recursive//`; \
314: for subdir in $$rev; do \
315: echo "Making $$target in $$subdir"; \
316: if test "$$subdir" = "."; then \
317: local_target="$$target-am"; \
318: else \
319: local_target="$$target"; \
320: fi; \
321: (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
322: || eval $$failcom; \
323: done && test -z "$$fail"
324: tags-recursive:
325: list='$(SUBDIRS)'; for subdir in $$list; do \
326: test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
327: done
328: ctags-recursive:
329: list='$(SUBDIRS)'; for subdir in $$list; do \
330: test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
331: done
332:
333: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
334: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
335: unique=`for i in $$list; do \
336: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
337: done | \
338: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
339: END { if (nonempty) { for (i in files) print i; }; }'`; \
340: mkid -fID $$unique
341: tags: TAGS
342:
343: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
344: $(TAGS_FILES) $(LISP)
345: tags=; \
346: here=`pwd`; \
347: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
348: include_option=--etags-include; \
349: empty_fix=.; \
350: else \
351: include_option=--include; \
352: empty_fix=; \
353: fi; \
354: list='$(SUBDIRS)'; for subdir in $$list; do \
355: if test "$$subdir" = .; then :; else \
356: test ! -f $$subdir/TAGS || \
357: tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
358: fi; \
359: done; \
360: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
361: unique=`for i in $$list; do \
362: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
363: done | \
364: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
365: END { if (nonempty) { for (i in files) print i; }; }'`; \
366: if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
367: test -n "$$unique" || unique=$$empty_fix; \
368: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
369: $$tags $$unique; \
370: fi
371: ctags: CTAGS
372: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
373: $(TAGS_FILES) $(LISP)
374: tags=; \
375: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
376: unique=`for i in $$list; do \
377: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
378: done | \
379: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
380: END { if (nonempty) { for (i in files) print i; }; }'`; \
381: test -z "$(CTAGS_ARGS)$$tags$$unique" \
382: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
383: $$tags $$unique
384:
385: GTAGS:
386: here=`$(am__cd) $(top_builddir) && pwd` \
387: && cd $(top_srcdir) \
388: && gtags -i $(GTAGS_ARGS) $$here
389:
390: distclean-tags:
391: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
392:
393: distdir: $(DISTFILES)
394: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
395: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
396: list='$(DISTFILES)'; \
397: dist_files=`for file in $$list; do echo $$file; done | \
398: sed -e "s|^$$srcdirstrip/||;t" \
399: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
400: case $$dist_files in \
401: */*) $(MKDIR_P) `echo "$$dist_files" | \
402: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
403: sort -u` ;; \
404: esac; \
405: for file in $$dist_files; do \
406: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
407: if test -d $$d/$$file; then \
408: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
409: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
410: cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
411: fi; \
412: cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
413: else \
414: test -f $(distdir)/$$file \
415: || cp -p $$d/$$file $(distdir)/$$file \
416: || exit 1; \
417: fi; \
418: done
419: list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
420: if test "$$subdir" = .; then :; else \
421: test -d "$(distdir)/$$subdir" \
422: || $(MKDIR_P) "$(distdir)/$$subdir" \
423: || exit 1; \
424: distdir=`$(am__cd) $(distdir) && pwd`; \
425: top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
426: (cd $$subdir && \
427: $(MAKE) $(AM_MAKEFLAGS) \
428: top_distdir="$$top_distdir" \
429: distdir="$$distdir/$$subdir" \
430: am__remove_distdir=: \
431: am__skip_length_check=: \
432: distdir) \
433: || exit 1; \
434: fi; \
435: done
436: check-am: all-am
437: check: check-recursive
438: all-am: Makefile $(MANS)
439: installdirs: installdirs-recursive
440: installdirs-am:
441: for dir in "$(DESTDIR)$(man8dir)"; do \
442: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
443: done
444: install: install-recursive
445: install-exec: install-exec-recursive
446: install-data: install-data-recursive
447: uninstall: uninstall-recursive
448:
449: install-am: all-am
450: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
451:
452: installcheck: installcheck-recursive
453: install-strip:
454: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
455: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
456: `test -z '$(STRIP)' || \
457: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
458: mostlyclean-generic:
459:
460: clean-generic:
461:
462: distclean-generic:
463: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
464:
465: maintainer-clean-generic:
466: @echo "This command is intended for maintainers to use"
467: @echo "it deletes files that may require special tools to rebuild."
468: clean: clean-recursive
469:
470: clean-am: clean-generic clean-libtool mostlyclean-am
471:
472: distclean: distclean-recursive
473: -rm -f Makefile
474: distclean-am: clean-am distclean-generic distclean-tags
475:
476: dvi: dvi-recursive
477:
478: dvi-am:
479:
480: html: html-recursive
481:
482: info: info-recursive
483:
484: info-am:
485:
486: install-data-am: install-man
487:
488: install-dvi: install-dvi-recursive
489:
490: install-exec-am:
491:
492: install-html: install-html-recursive
493:
494: install-info: install-info-recursive
495:
496: install-man: install-man8
497:
498: install-pdf: install-pdf-recursive
499:
500: install-ps: install-ps-recursive
501:
502: installcheck-am:
503:
504: maintainer-clean: maintainer-clean-recursive
505: -rm -f Makefile
506: maintainer-clean-am: distclean-am maintainer-clean-generic
507:
508: mostlyclean: mostlyclean-recursive
509:
510: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
511:
512: pdf: pdf-recursive
513:
514: pdf-am:
515:
516: ps: ps-recursive
517:
518: ps-am:
519:
520: uninstall-am: uninstall-man
521:
522: uninstall-man: uninstall-man8
523:
524: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
525: install-strip
526:
527: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
528: all all-am check check-am clean clean-generic clean-libtool \
529: ctags ctags-recursive distclean distclean-generic \
530: distclean-libtool distclean-tags distdir dvi dvi-am html \
531: html-am info info-am install install-am install-data \
532: install-data-am install-dvi install-dvi-am install-exec \
533: install-exec-am install-html install-html-am install-info \
534: install-info-am install-man install-man8 install-pdf \
535: install-pdf-am install-ps install-ps-am install-strip \
536: installcheck installcheck-am installdirs installdirs-am \
537: maintainer-clean maintainer-clean-generic mostlyclean \
538: mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
539: tags tags-recursive uninstall uninstall-am uninstall-man \
540: uninstall-man8
541:
542: # Tell versions [3.59,3.63) of GNU make to not export all variables.
543: # Otherwise a system limit (for SysV at least) may be exceeded.
544: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>