1: #! /usr/bin/perl -w
2:
3: # Copyright (c) 2007,2009 by Internet Systems Consortium, Inc. ("ISC")
4: #
5: # Permission to use, copy, modify, and distribute this software for any
6: # purpose with or without fee is hereby granted, provided that the above
7: # copyright notice and this permission notice appear in all copies.
8: #
9: # THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES
10: # WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11: # MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR
12: # ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13: # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14: # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
15: # OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16: #
17: # Internet Systems Consortium, Inc.
18: # 950 Charter Street
19: # Redwood City, CA 94063
20: # <info@isc.org>
21: # https://www.isc.org/
22:
23: use strict;
24: use English;
25: use Time::HiRes qw( sleep );
26: use Socket;
27: use Socket6;
28: use IO::Select;
29:
30: use dhcp_client;
31:
32: # XXX: for debugging
33: use Data::Dumper;
34:
35: # not-yet-standard options
36: my $OPT_TIME_SERVERS = 40;
37: my $OPT_TIME_OFFSET = 41;
38:
39: # DOCSIS sub-options
40: my $DOCSIS_OPT_ORO = 1;
41: # 2 to 31 are reserved
42: my $DOCSIS_OPT_TFTP_SERVERS = 32;
43: my $DOCSIS_OPT_CONFIG_FILE_NAME = 33;
44: my $DOCSIS_OPT_SYSLOG_SERVERS = 34;
45: my $DOCSIS_OPT_TLV5 = 35;
46: my $DOCSIS_OPT_DEVICE_ID = 36;
47: my $DOCSIS_OPT_CCC = 37;
48: my $DOCSIS_OPT_VERS = 38;
49:
50: # well-known addresses
51: my $All_DHCP_Relay_Agents_and_Servers = "ff02::1:2";
52: my $All_DHCP_Servers = "ff05::1:3";
53:
54: # ports
55: my $client_port = 546;
56: my $server_port = 547;
57:
58: # create a new Solicit message
59: my $msg = dhcp_client::msg->new($MSG_DECLINE);
60:
61: # add the Client Identifier (required by DOCSIS and RFC 3315)
62: $msg->add_option($OPT_CLIENTID, dhcp_client::duid());
63:
64: # add the Server identifier (required by RFC 3315)
65: $msg->add_option($OPT_SERVERID, "InfiniteEntropy");
66:
67: # add Elapsed Time, set to 0 on first packet (required by RFC 3315)
68: $msg->add_option($OPT_ELAPSED_TIME, "\x00\x00");
69:
70: # add IA_NA for each interface (required by DOCSIS and RFC 3315)
71: # XXX: should this be a single interface only?
72: my $iaid = 0;
73: foreach my $iface (dhcp_client::iface()) {
74: my $option_data = pack("NNN", ++$iaid, 0, 0);
75: $msg->add_option($OPT_IA_NA, $option_data);
76: }
77:
78: # timeout parameters, from DOCSIS
79: my $IRT = $SOL_TIMEOUT;
80: my $MRT = $SOL_MAX_RT;
81: my $MRC = 4; # DOCSIS says 4, RFC 3315 says it SHOULD be 0
82: my $MRD = 0;
83:
84: # sleep a random amount of time between 0 and 1 second, required by RFC 3315
85: # XXX: this seems pretty stupid
86: sleep(rand($SOL_MAX_DELAY));
87:
88: my $RT;
89: my $count = 0;
90: my $mrd_end_time;
91: if ($MRD != 0) {
92: $mrd_end_time = time() + $MRD;
93: }
94: my $reply_msg;
95: do {
96: # create our socket, and send our Solicit
97: socket(SOCK, PF_INET6, SOCK_DGRAM, getprotobyname('udp')) || die;
98: my $addr = inet_pton(AF_INET6, $All_DHCP_Servers);
99: my $packet = $msg->packet();
100: my $send_ret = send(SOCK, $packet, 0,
101: pack_sockaddr_in6($server_port, $addr));
102: if (not defined($send_ret)) {
103: printf STDERR
104: "Error \%d sending DHCPv6 Solicit message;\n\%s\n",
105: 0+$ERRNO, $ERRNO;
106: exit(1);
107: } elsif ($send_ret != length($packet)) {
108: print STDERR "Unable to send entire DHCPv6 Solicit message.\n";
109: exit(1);
110: }
111: $count++;
112:
113: my $RAND = rand(0.2) - 0.1;
114: if (defined $RT) {
115: $RT = 2*$RT + $RAND*$RT;
116: if (($RT > $MRT) && ($MRT != 0)) {
117: $RT = $MRT + $RAND*$RT;
118: }
119: } else {
120: $RT = $IRT + $RAND*$IRT;
121: }
122:
123: my $rt_end_time = time() + $RT;
124: if (defined($mrd_end_time) && ($mrd_end_time > $rt_end_time)) {
125: $rt_end_time = $mrd_end_time;
126: }
127:
128: for (;;) {
129: my $timeout = $rt_end_time - time();
130: if ($timeout < 0) {
131: # print STDERR "Timeout waiting for DHCPv6 Advertise ",
132: # "or Reply message.\n";
133: last;
134: }
135:
136: my @ready = IO::Select->new(\*SOCK)->can_read($timeout);
137:
138: if (@ready) {
139: my $reply;
140: my $recv_ret;
141:
142: $recv_ret = recv(SOCK, $reply, 1500, 0);
143: if (not defined $recv_ret) {
144: printf STDERR
145: "Error \%d receiving DHCPv6 " .
146: "message;\n\%s\n",
147: 0+$ERRNO, $ERRNO;
148: exit(1);
149: }
150:
151: $reply_msg = dhcp_client::msg::decode($reply, 1);
152: if (($reply_msg->{msg_type} == $MSG_ADVERTISE) ||
153: ($reply_msg->{msg_type} == $MSG_REPLY)) {
154: last;
155: }
156: }
157: }
158:
159: } until ($reply_msg ||
160: (($MRC != 0) && ($count > $MRC)) ||
161: (defined($mrd_end_time) && ($mrd_end_time > time())));
162:
163: unless ($reply_msg) {
164: if (($MRC != 0) && ($count >= $MRC)) {
165: print STDERR
166: "No reply after maximum retransmission count.\n";
167: } else {
168: print STDERR
169: "No reply after maximum retransmission duration.\n";
170: }
171: }
172:
173: if ($reply_msg && ($reply_msg->{msg_type} == $MSG_REPLY)) {
174: print "Got DHCPv6 Reply message.\n";
175: exit(0);
176: }
177:
178: #$Data::Dumper::Useqq = 1;
179: #print Dumper($msg), "\n";
180: #print Dumper($msg->packet()), "\n";
181: #
182: #print "packet length: ", length($msg->packet()), "\n";
183:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to 292-decline-no-address.pl CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / dhcp / tests / DHCPv6