Return to portforward CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / dnsmasq / contrib / port-forward

Annotation of embedaddon/dnsmasq/contrib/port-forward/portforward, revision 1.1

1.1     ! misho       1: # This file is read by /usr/sbin/dnsmasq-portforward and used to set up port 
        !             2: # forwarding to hostnames. If the dnsmasq-determined hostname matches the
        !             3: # first column of this file, then a DNAT port-forward will be set up 
        !             4: # to the address which has just been allocated by DHCP . The second field 
        !             5: # is port number(s). If there is only one, then the port-forward goes to 
        !             6: # the same port on the DHCP-client, if there are two seperated with a 
        !             7: # colon, then the second number is the port to which the connection 
        !             8: # is forwarded on the DHCP-client. By default, forwarding is set up 
        !             9: # for TCP, but it can done for UDP instead by prefixing the port to "u". 
        !            10: # To forward both TCP and UDP, two lines are required. 
        !            11: #
        !            12: # eg.
        !            13: # wwwserver 80
        !            14: # will set up a port forward from port 80 on this host to port 80 
        !            15: # at the address allocated to wwwserver whenever wwwserver gets a DHCP lease.
        !            16: #
        !            17: # wwwserver 8080:80
        !            18: # will set up a port forward from port 8080 on this host to port 80
        !            19: # on the DHCP-client.
        !            20: #
        !            21: # dnsserver 53
        !            22: # dnsserver u53
        !            23: # will port forward port 53 UDP and TCP from this host to port 53 on dnsserver.
        !            24: #
        !            25: # Port forwards will recreated when dnsmasq restarts after a reboot, and
        !            26: # removed when DHCP leases expire. After editing this file, send
        !            27: # SIGHUP to dnsmasq to install new iptables entries in the kernel.
        !            28: