[BACK]Return to ltmain.sh CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / expat / conftools

Diff for /embedaddon/expat/conftools/ltmain.sh between versions 1.1.1.1 and 1.1.1.2

version 1.1.1.1, 2012/02/21 23:00:54 version 1.1.1.2, 2014/06/15 16:09:42
Line 1 Line 1
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.# libtool (GNU libtool) 2.4
## Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
## This is free software; see the source for copying conditions.  There is NO
# This program is free software; you can redistribute it and/or modify# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
 # GNU Libtool is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by  # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or  # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.  # (at your option) any later version.
 #  #
# This program is distributed in the hope that it will be useful, but# As a special exception to the GNU General Public License,
 # if you distribute this file as part of a program or library that
 # is built using GNU Libtool, you may include this file under the
 # same distribution terms that you use for the rest of that program.
 #
 # GNU Libtool is distributed in the hope that it will be useful, but
 # WITHOUT ANY WARRANTY; without even the implied warranty of  # WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU  # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 # General Public License for more details.  # General Public License for more details.
 #  #
 # You should have received a copy of the GNU General Public License  # You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software# along with GNU Libtool; see the file COPYING.  If not, a copy
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.# can be downloaded from http://www.gnu.org/licenses/gpl.html,
 # or obtained by writing to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
 # Usage: $progname [OPTION]... [MODE-ARG]...
 #  #
# As a special exception to the GNU General Public License, if you# Provide generalized library-building support services.
# distribute this file as part of a program that contains a#
# configuration script generated by Autoconf, you may include it under#       --config             show all configuration variables
# the same distribution terms that you use for the rest of that program.#       --debug              enable verbose shell tracing
 #   -n, --dry-run            display commands without modifying any files
 #       --features           display basic configuration information and exit
 #       --mode=MODE          use operation mode MODE
 #       --preserve-dup-deps  don't remove duplicate dependency libraries
 #       --quiet, --silent    don't print informational messages
 #       --no-quiet, --no-silent
 #                            print informational messages (default)
 #       --tag=TAG            use configuration variables from tag TAG
 #   -v, --verbose            print more informational messages than default
 #       --no-verbose         don't print the extra informational messages
 #       --version            print version information
 #   -h, --help, --help-all   print short, long, or detailed help message
 #
 # MODE must be one of the following:
 #
 #         clean              remove files from the build directory
 #         compile            compile a source file into a libtool object
 #         execute            automatically set library path, then run a program
 #         finish             complete the installation of libtool libraries
 #         install            install libraries or executables
 #         link               create a library or an executable
 #         uninstall          remove libraries from an installed directory
 #
 # MODE-ARGS vary depending on the MODE.  When passed as first option,
 # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #
 #         host-triplet: $host
 #         shell:                $SHELL
 #         compiler:             $LTCC
 #         compiler flags:               $LTCFLAGS
 #         linker:               $LD (gnu? $with_gnu_ld)
 #         $progname:   (GNU libtool) 2.4 Debian-2.4-2ubuntu1
 #         automake:     $automake_version
 #         autoconf:     $autoconf_version
 #
 # Report bugs to <bug-libtool@gnu.org>.
 # GNU libtool home page: <http://www.gnu.org/software/libtool/>.
 # General help using GNU software: <http://www.gnu.org/gethelp/>.
   
basename="s,^.*/,,g"PROGRAM=libtool
 PACKAGE=libtool
 VERSION="2.4 Debian-2.4-2ubuntu1"
 TIMESTAMP=""
 package_revision=1.3293
   
   # Be Bourne compatible
   if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
     emulate sh
     NULLCMD=:
     # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
     # is contrary to our usage.  Disable this feature.
     alias -g '${1+"$@"}'='"$@"'
     setopt NO_GLOB_SUBST
   else
     case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
   fi
   BIN_SH=xpg4; export BIN_SH # for Tru64
   DUALCASE=1; export DUALCASE # for MKS sh
   
   # A function that is used when there is no print builtin or printf.
   func_fallback_echo ()
   {
     eval 'cat <<_LTECHO_EOF
   $1
   _LTECHO_EOF'
   }
   
   # NLS nuisances: We save the old values to restore during execute mode.
   lt_user_locale=
   lt_safe_locale=
   for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
   do
     eval "if test \"\${$lt_var+set}\" = set; then
             save_$lt_var=\$$lt_var
             $lt_var=C
             export $lt_var
             lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
             lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
           fi"
   done
   LC_ALL=C
   LANGUAGE=C
   export LANGUAGE LC_ALL
   
   $lt_unset CDPATH
   
   
 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh  # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 # is ksh but when the shell is invoked as "sh" and the current value of  # is ksh but when the shell is invoked as "sh" and the current value of
 # the _XPG environment variable is not equal to 1 (one), the special  # the _XPG environment variable is not equal to 1 (one), the special
Line 33  basename="s,^.*/,,g" Line 132  basename="s,^.*/,,g"
 # function.  # function.
 progpath="$0"  progpath="$0"
   
 # The name of this program:  
 progname=`echo "$progpath" | $SED $basename`  
 modename="$progname"  
   
   
   : ${CP="cp -f"}
   test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
   : ${EGREP="/bin/grep -E"}
   : ${FGREP="/bin/grep -F"}
   : ${GREP="/bin/grep"}
   : ${LN_S="ln -s"}
   : ${MAKE="make"}
   : ${MKDIR="mkdir"}
   : ${MV="mv -f"}
   : ${RM="rm -f"}
   : ${SED="/bin/sed"}
   : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
   : ${Xsed="$SED -e 1s/^X//"}
   
 # Global variables:  # Global variables:
 EXIT_SUCCESS=0  EXIT_SUCCESS=0
 EXIT_FAILURE=1  EXIT_FAILURE=1
   EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
   EXIT_SKIP=77      # $? = 77 is used to indicate a skipped test to automake.
   
PROGRAM=ltmain.shexit_status=$EXIT_SUCCESS
PACKAGE=libtool 
VERSION=1.5.22 
TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" 
   
# See if we are running on zsh, and set the options which allow our# Make sure IFS has a sensible default
# commands through without removal of \ escapes.lt_nl='
if test -n "${ZSH_VERSION+set}" ; then'
  setopt NO_GLOB_SUBSTIFS="   $lt_nl"
fi 
   
# Check that we have a working $echo.dirname="s,/[^/]*$,,"
if test "X$1" = X--no-reexec; thenbasename="s,^.*/,,"
  # Discard the --no-reexec flag, and continue. 
  shift 
elif test "X$1" = X--fallback-echo; then 
  # Avoid inline document here, it may be left over 
  : 
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then 
  # Yippee, $echo works! 
  : 
else 
  # Restart under the correct shell, and then maybe $echo will work. 
  exec $SHELL "$progpath" --no-reexec ${1+"$@"} 
fi 
   
if test "X$1" = X--fallback-echo; then# func_dirname file append nondir_replacement
  # used as fallback echo# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
  shift# otherwise set result to NONDIR_REPLACEMENT.
  cat <<EOFfunc_dirname ()
$*{
EOF    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
  exit $EXIT_SUCCESS    if test "X$func_dirname_result" = "X${1}"; then
fi      func_dirname_result="${3}"
     else
       func_dirname_result="$func_dirname_result${2}"
     fi
 } # func_dirname may be replaced by extended shell implementation
   
 default_mode=  
 help="Try \`$progname --help' for more information."  
 magic="%%%MAGIC variable%%%"  
 mkdir="mkdir"  
 mv="mv -f"  
 rm="rm -f"  
   
   # func_basename file
   func_basename ()
   {
       func_basename_result=`$ECHO "${1}" | $SED "$basename"`
   } # func_basename may be replaced by extended shell implementation
   
   
   # func_dirname_and_basename file append nondir_replacement
   # perform func_basename and func_dirname in a single function
   # call:
   #   dirname:  Compute the dirname of FILE.  If nonempty,
   #             add APPEND to the result, otherwise set result
   #             to NONDIR_REPLACEMENT.
   #             value returned in "$func_dirname_result"
   #   basename: Compute filename of FILE.
   #             value retuned in "$func_basename_result"
   # Implementation must be kept synchronized with func_dirname
   # and func_basename. For efficiency, we do not delegate to
   # those functions but instead duplicate the functionality here.
   func_dirname_and_basename ()
   {
       # Extract subdirectory from the argument.
       func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
       if test "X$func_dirname_result" = "X${1}"; then
         func_dirname_result="${3}"
       else
         func_dirname_result="$func_dirname_result${2}"
       fi
       func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
   } # func_dirname_and_basename may be replaced by extended shell implementation
   
   
   # func_stripname prefix suffix name
   # strip PREFIX and SUFFIX off of NAME.
   # PREFIX and SUFFIX must not contain globbing or regex special
   # characters, hashes, percent signs, but SUFFIX may contain a leading
   # dot (in which case that matches only a dot).
   # func_strip_suffix prefix name
   func_stripname ()
   {
       case ${2} in
         .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
         *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
       esac
   } # func_stripname may be replaced by extended shell implementation
   
   
   # These SED scripts presuppose an absolute path with a trailing slash.
   pathcar='s,^/\([^/]*\).*$,\1,'
   pathcdr='s,^/[^/]*,,'
   removedotparts=':dotsl
                   s@/\./@/@g
                   t dotsl
                   s,/\.$,/,'
   collapseslashes='s@/\{1,\}@/@g'
   finalslash='s,/*$,/,'
   
   # func_normal_abspath PATH
   # Remove doubled-up and trailing slashes, "." path components,
   # and cancel out any ".." path components in PATH after making
   # it an absolute path.
   #             value returned in "$func_normal_abspath_result"
   func_normal_abspath ()
   {
     # Start from root dir and reassemble the path.
     func_normal_abspath_result=
     func_normal_abspath_tpath=$1
     func_normal_abspath_altnamespace=
     case $func_normal_abspath_tpath in
       "")
         # Empty path, that just means $cwd.
         func_stripname '' '/' "`pwd`"
         func_normal_abspath_result=$func_stripname_result
         return
       ;;
       # The next three entries are used to spot a run of precisely
       # two leading slashes without using negated character classes;
       # we take advantage of case's first-match behaviour.
       ///*)
         # Unusual form of absolute path, do nothing.
       ;;
       //*)
         # Not necessarily an ordinary path; POSIX reserves leading '//'
         # and for example Cygwin uses it to access remote file shares
         # over CIFS/SMB, so we conserve a leading double slash if found.
         func_normal_abspath_altnamespace=/
       ;;
       /*)
         # Absolute path, do nothing.
       ;;
       *)
         # Relative path, prepend $cwd.
         func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
       ;;
     esac
     # Cancel out all the simple stuff to save iterations.  We also want
     # the path to end with a slash for ease of parsing, so make sure
     # there is one (and only one) here.
     func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
           -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
     while :; do
       # Processed it all yet?
       if test "$func_normal_abspath_tpath" = / ; then
         # If we ascended to the root using ".." the result may be empty now.
         if test -z "$func_normal_abspath_result" ; then
           func_normal_abspath_result=/
         fi
         break
       fi
       func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
           -e "$pathcar"`
       func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
           -e "$pathcdr"`
       # Figure out what to do with it
       case $func_normal_abspath_tcomponent in
         "")
           # Trailing empty path component, ignore it.
         ;;
         ..)
           # Parent dir; strip last assembled component from result.
           func_dirname "$func_normal_abspath_result"
           func_normal_abspath_result=$func_dirname_result
         ;;
         *)
           # Actual path component, append it.
           func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
         ;;
       esac
     done
     # Restore leading double-slash if one was found on entry.
     func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
   }
   
   # func_relative_path SRCDIR DSTDIR
   # generates a relative path from SRCDIR to DSTDIR, with a trailing
   # slash if non-empty, suitable for immediately appending a filename
   # without needing to append a separator.
   #             value returned in "$func_relative_path_result"
   func_relative_path ()
   {
     func_relative_path_result=
     func_normal_abspath "$1"
     func_relative_path_tlibdir=$func_normal_abspath_result
     func_normal_abspath "$2"
     func_relative_path_tbindir=$func_normal_abspath_result
   
     # Ascend the tree starting from libdir
     while :; do
       # check if we have found a prefix of bindir
       case $func_relative_path_tbindir in
         $func_relative_path_tlibdir)
           # found an exact match
           func_relative_path_tcancelled=
           break
           ;;
         $func_relative_path_tlibdir*)
           # found a matching prefix
           func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
           func_relative_path_tcancelled=$func_stripname_result
           if test -z "$func_relative_path_result"; then
             func_relative_path_result=.
           fi
           break
           ;;
         *)
           func_dirname $func_relative_path_tlibdir
           func_relative_path_tlibdir=${func_dirname_result}
           if test "x$func_relative_path_tlibdir" = x ; then
             # Have to descend all the way to the root!
             func_relative_path_result=../$func_relative_path_result
             func_relative_path_tcancelled=$func_relative_path_tbindir
             break
           fi
           func_relative_path_result=../$func_relative_path_result
           ;;
       esac
     done
   
     # Now calculate path; take care to avoid doubling-up slashes.
     func_stripname '' '/' "$func_relative_path_result"
     func_relative_path_result=$func_stripname_result
     func_stripname '/' '/' "$func_relative_path_tcancelled"
     if test "x$func_stripname_result" != x ; then
       func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
     fi
   
     # Normalisation. If bindir is libdir, return empty string,
     # else relative path ending with a slash; either way, target
     # file name can be directly appended.
     if test ! -z "$func_relative_path_result"; then
       func_stripname './' '' "$func_relative_path_result/"
       func_relative_path_result=$func_stripname_result
     fi
   }
   
   # The name of this program:
   func_dirname_and_basename "$progpath"
   progname=$func_basename_result
   
   # Make sure we have an absolute path for reexecution:
   case $progpath in
     [\\/]*|[A-Za-z]:\\*) ;;
     *[\\/]*)
        progdir=$func_dirname_result
        progdir=`cd "$progdir" && pwd`
        progpath="$progdir/$progname"
        ;;
     *)
        save_IFS="$IFS"
        IFS=:
        for progdir in $PATH; do
          IFS="$save_IFS"
          test -x "$progdir/$progname" && break
        done
        IFS="$save_IFS"
        test -n "$progdir" || progdir=`pwd`
        progpath="$progdir/$progname"
        ;;
   esac
   
 # Sed substitution that helps us do robust quoting.  It backslashifies  # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.  # metacharacters that are still active within double-quoted strings.
 Xsed="${SED}"' -e 1s/^X//'  Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
# test EBCDIC or ASCII 
case `echo X|tr X '\101'` in 
 A) # ASCII based system 
    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr 
  SP2NL='tr \040 \012' 
  NL2SP='tr \015\012 \040\040' 
  ;; 
 *) # EBCDIC based system 
  SP2NL='tr \100 \n' 
  NL2SP='tr \r\n \100\100' 
  ;; 
esac 
   
# NLS nuisances.# Same as above, but do not quote variable references.
# Only set LANG and LC_ALL to C if already set.double_quote_subst='s/\(["`\\]\)/\\\1/g'
# These must not be set unconditionally because not all systems understand 
# e.g. LANG=C (notably SCO). 
# We save the old values to restore during execute mode. 
if test "${LC_ALL+set}" = set; then 
  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL 
fi 
if test "${LANG+set}" = set; then 
  save_LANG="$LANG"; LANG=C; export LANG 
fi 
   
# Make sure IFS has a sensible default# Sed substitution that turns a string into a regex matching for the
lt_nl='# string literally.
'sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
IFS="   $lt_nl" 
   
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then# Sed substitution that converts a w32 file name or path
  $echo "$modename: not configured to build any kind of library" 1>&2# which contains forward slashes, into one that contains
  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2# (escaped) backslashes.  A very naive implementation.
  exit $EXIT_FAILURElt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
fi 
   
# Global variables.# Re-`\' parameter expansions in output of double_quote_subst that were
mode=$default_mode# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
nonopt=# in input to double_quote_subst, that '$' was protected from expansion.
prev=# Since each input `\' is now two `\'s, look for any number of runs of
prevopt=# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
run=bs='\\'
show="$echo"bs2='\\\\'
show_help=bs4='\\\\\\\\'
execute_dlfiles=dollar='\$'
duplicate_deps=nosed_double_backslash="\
preserve_args=  s/$bs4/&\\
lo2o="s/\\.lo\$/.${objext}/"/g
o2lo="s/\\.${objext}\$/.lo/"  s/^$bs2$dollar/$bs&/
   s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
   s/\n//g"
   
###################################### Standard options:
# Shell function definitions:opt_dry_run=false
# This seems to be the best place for themopt_help=false
 opt_quiet=false
 opt_verbose=false
 opt_warning=:
   
   # func_echo arg...
   # Echo program name prefixed message, along with the current mode
   # name if it has been set yet.
   func_echo ()
   {
       $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
   }
   
   # func_verbose arg...
   # Echo program name prefixed message in verbose mode only.
   func_verbose ()
   {
       $opt_verbose && func_echo ${1+"$@"}
   
       # A bug in bash halts the script if the last line of a function
       # fails when set -e is in force, so we need another command to
       # work around that:
       :
   }
   
   # func_echo_all arg...
   # Invoke $ECHO with all args, space-separated.
   func_echo_all ()
   {
       $ECHO "$*"
   }
   
   # func_error arg...
   # Echo program name prefixed message to standard error.
   func_error ()
   {
       $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
   }
   
   # func_warning arg...
   # Echo program name prefixed warning message to standard error.
   func_warning ()
   {
       $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
   
       # bash bug again:
       :
   }
   
   # func_fatal_error arg...
   # Echo program name prefixed message to standard error, and exit.
   func_fatal_error ()
   {
       func_error ${1+"$@"}
       exit $EXIT_FAILURE
   }
   
   # func_fatal_help arg...
   # Echo program name prefixed message to standard error, followed by
   # a help hint, and exit.
   func_fatal_help ()
   {
       func_error ${1+"$@"}
       func_fatal_error "$help"
   }
   help="Try \`$progname --help' for more information."  ## default
   
   
   # func_grep expression filename
   # Check whether EXPRESSION matches any line of FILENAME, without output.
   func_grep ()
   {
       $GREP "$1" "$2" >/dev/null 2>&1
   }
   
   
   # func_mkdir_p directory-path
   # Make sure the entire path to DIRECTORY-PATH is available.
   func_mkdir_p ()
   {
       my_directory_path="$1"
       my_dir_list=
   
       if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
   
         # Protect directory names starting with `-'
         case $my_directory_path in
           -*) my_directory_path="./$my_directory_path" ;;
         esac
   
         # While some portion of DIR does not yet exist...
         while test ! -d "$my_directory_path"; do
           # ...make a list in topmost first order.  Use a colon delimited
           # list incase some portion of path contains whitespace.
           my_dir_list="$my_directory_path:$my_dir_list"
   
           # If the last portion added has no slash in it, the list is done
           case $my_directory_path in */*) ;; *) break ;; esac
   
           # ...otherwise throw away the child directory and loop
           my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
         done
         my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
   
         save_mkdir_p_IFS="$IFS"; IFS=':'
         for my_dir in $my_dir_list; do
           IFS="$save_mkdir_p_IFS"
           # mkdir can fail with a `File exist' error if two processes
           # try to create one of the directories concurrently.  Don't
           # stop in that case!
           $MKDIR "$my_dir" 2>/dev/null || :
         done
         IFS="$save_mkdir_p_IFS"
   
         # Bail out if we (or some other process) failed to create a directory.
         test -d "$my_directory_path" || \
           func_fatal_error "Failed to create \`$1'"
       fi
   }
   
   
 # func_mktempdir [string]  # func_mktempdir [string]
 # Make a temporary directory that won't clash with other running  # Make a temporary directory that won't clash with other running
 # libtool processes, and avoids race conditions if possible.  If  # libtool processes, and avoids race conditions if possible.  If
Line 149  func_mktempdir () Line 562  func_mktempdir ()
 {  {
     my_template="${TMPDIR-/tmp}/${1-$progname}"      my_template="${TMPDIR-/tmp}/${1-$progname}"
   
    if test "$run" = ":"; then    if test "$opt_dry_run" = ":"; then
       # Return a directory name, but don't create it in dry-run mode        # Return a directory name, but don't create it in dry-run mode
       my_tmpdir="${my_template}-$$"        my_tmpdir="${my_template}-$$"
     else      else
Line 158  func_mktempdir () Line 571  func_mktempdir ()
       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`        my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
   
       if test ! -d "$my_tmpdir"; then        if test ! -d "$my_tmpdir"; then
        # Failing that, at least try and use $RANDOM to avoid a race        # Failing that, at least try and use $RANDOM to avoid a race
        my_tmpdir="${my_template}-${RANDOM-0}$$"        my_tmpdir="${my_template}-${RANDOM-0}$$"
   
        save_mktempdir_umask=`umask`        save_mktempdir_umask=`umask`
        umask 0077        umask 0077
        $mkdir "$my_tmpdir"        $MKDIR "$my_tmpdir"
        umask $save_mktempdir_umask        umask $save_mktempdir_umask
       fi        fi
   
       # If we're not in dry-run mode, bomb out on failure        # If we're not in dry-run mode, bomb out on failure
      test -d "$my_tmpdir" || {      test -d "$my_tmpdir" || \
        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
        exit $EXIT_FAILURE 
      } 
     fi      fi
   
    $echo "X$my_tmpdir" | $Xsed    $ECHO "$my_tmpdir"
 }  }
   
   
# func_win32_libid arg# func_quote_for_eval arg
# return the library type of file 'arg'# Aesthetically quote ARG to be evaled later.
## This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
# Need a lot of goo to handle *both* DLLs and import libs# is double-quoted, suitable for a subsequent eval, whereas
# Has to be a shell function in order to 'eat' the argument# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
# that is supplied when $file_magic_command is called.# which are still active within double quotes backslashified.
func_win32_libid ()func_quote_for_eval ()
 {  {
  win32_libid_type="unknown"    case $1 in
  win32_fileres=`file -L $1 2>/dev/null`      *[\\\`\"\$]*)
  case $win32_fileres in        func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
  *ar\ archive\ import\ library*) # definitely import      *)
    win32_libid_type="x86 archive import"        func_quote_for_eval_unquoted_result="$1" ;;
    ;;    esac
  *ar\ archive*) # could be an import, or static
    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \    case $func_quote_for_eval_unquoted_result in
      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then      # Double-quote args containing shell metacharacters to delay
      win32_nmres=`eval $NM -f posix -A $1 | \      # word splitting, command substitution and and variable
        $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`      # expansion for a subsequent eval.
      case $win32_nmres in      # Many Bourne shells cannot handle close brackets correctly
      import*)  win32_libid_type="x86 archive import";;      # in scan sets, so we specify it separately.
      *)        win32_libid_type="x86 archive static";;      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
      esac        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
         ;;
       *)
         func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
     esac
 }
 
 
 # func_quote_for_expand arg
 # Aesthetically quote ARG to be evaled later; same as above,
 # but do not quote variable references.
 func_quote_for_expand ()
 {
     case $1 in
       *[\\\`\"]*)
         my_arg=`$ECHO "$1" | $SED \
             -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
         my_arg="$1" ;;
     esac
 
     case $my_arg in
       # Double-quote args containing shell metacharacters to delay
       # word splitting and command substitution for a subsequent eval.
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
         my_arg="\"$my_arg\""
         ;;
     esac
 
     func_quote_for_expand_result="$my_arg"
 }
 
 
 # func_show_eval cmd [fail_exp]
 # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.
 func_show_eval ()
 {
     my_cmd="$1"
     my_fail_exp="${2-:}"
 
     ${opt_silent-false} || {
       func_quote_for_expand "$my_cmd"
       eval "func_echo $func_quote_for_expand_result"
     }
 
     if ${opt_dry_run-false}; then :; else
       eval "$my_cmd"
       my_status=$?
       if test "$my_status" -eq 0; then :; else
         eval "(exit $my_status); $my_fail_exp"
       fi
     fi      fi
   }
   
   
   # func_show_eval_locale cmd [fail_exp]
   # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
   # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
   # is given, then evaluate it.  Use the saved locale for evaluation.
   func_show_eval_locale ()
   {
       my_cmd="$1"
       my_fail_exp="${2-:}"
   
       ${opt_silent-false} || {
         func_quote_for_expand "$my_cmd"
         eval "func_echo $func_quote_for_expand_result"
       }
   
       if ${opt_dry_run-false}; then :; else
         eval "$lt_user_locale
               $my_cmd"
         my_status=$?
         eval "$lt_safe_locale"
         if test "$my_status" -eq 0; then :; else
           eval "(exit $my_status); $my_fail_exp"
         fi
       fi
   }
   
   # func_tr_sh
   # Turn $1 into a string suitable for a shell variable name.
   # Result is stored in $func_tr_sh_result.  All characters
   # not in the set a-zA-Z0-9_ are replaced with '_'. Further,
   # if $1 begins with a digit, a '_' is prepended as well.
   func_tr_sh ()
   {
     case $1 in
     [0-9]* | *[!a-zA-Z0-9_]*)
       func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
     ;;      ;;
  *DLL*)  * )
    win32_libid_type="x86 DLL"    func_tr_sh_result=$1
     ;;      ;;
  *executable*) # but shell scripts are "executable" too...  esac
    case $win32_fileres in}
    *MS\ Windows\ PE\ Intel*)
      win32_libid_type="x86 DLL"
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {
     $opt_debug
 
     $SED -n '/(C)/!b go
         :more
         /\./!{
           N
           s/\n# / /
           b more
         }
         :go
         /^# '$PROGRAM' (GNU /,/# warranty; / {
         s/^# //
         s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
         p
      }' < "$progpath"
      exit $?
 }
 
 # func_usage
 # Echo short help message to standard output and exit.
 func_usage ()
 {
     $opt_debug
 
     $SED -n '/^# Usage:/,/^#  *.*--help/ {
         s/^# //
         s/^# *$//
         s/\$progname/'$progname'/
         p
     }' < "$progpath"
     echo
     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 
 # func_help [NOEXIT]
 # Echo long help message to standard output and exit,
 # unless 'noexit' is passed as argument.
 func_help ()
 {
     $opt_debug
 
     $SED -n '/^# Usage:/,/# Report bugs to/ {
         :print
         s/^# //
         s/^# *$//
         s*\$progname*'$progname'*
         s*\$host*'"$host"'*
         s*\$SHELL*'"$SHELL"'*
         s*\$LTCC*'"$LTCC"'*
         s*\$LTCFLAGS*'"$LTCFLAGS"'*
         s*\$LD*'"$LD"'*
         s/\$with_gnu_ld/'"$with_gnu_ld"'/
         s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
         s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
         p
         d
      }
      /^# .* home page:/b print
      /^# General help using/b print
      ' < "$progpath"
     ret=$?
     if test -z "$1"; then
       exit $ret
     fi
 }
 
 # func_missing_arg argname
 # Echo program name prefixed message to standard error and set global
 # exit_cmd.
 func_missing_arg ()
 {
     $opt_debug
 
     func_error "missing argument for $1."
     exit_cmd=exit
 }
 
 
 # func_split_short_opt shortopt
 # Set func_split_short_opt_name and func_split_short_opt_arg shell
 # variables after splitting SHORTOPT after the 2nd character.
 func_split_short_opt ()
 {
     my_sed_short_opt='1s/^\(..\).*$/\1/;q'
     my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
 
     func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
     func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
 } # func_split_short_opt may be replaced by extended shell implementation
 
 
 # func_split_long_opt longopt
 # Set func_split_long_opt_name and func_split_long_opt_arg shell
 # variables after splitting LONGOPT at the `=' sign.
 func_split_long_opt ()
 {
     my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
     my_sed_long_arg='1s/^--[^=]*=//'
 
     func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
     func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
 } # func_split_long_opt may be replaced by extended shell implementation
 
 exit_cmd=:
 
 
 
 
 
 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"
 
 # Global variables.
 nonopt=
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
 extracted_archives=
 extracted_serial=0
 
 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
 exec_cmd=
 
 # func_append var value
 # Append VALUE to the end of shell variable VAR.
 func_append ()
 {
     eval "${1}=\$${1}\${2}"
 } # func_append may be replaced by extended shell implementation
 
 # func_append_quoted var value
 # Quote VALUE and append to the end of shell variable VAR, separated
 # by a space.
 func_append_quoted ()
 {
     func_quote_for_eval "${2}"
     eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
 } # func_append_quoted may be replaced by extended shell implementation
 
 
 # func_arith arithmetic-term...
 func_arith ()
 {
     func_arith_result=`expr "${@}"`
 } # func_arith may be replaced by extended shell implementation
 
 
 # func_len string
 # STRING may not start with a hyphen.
 func_len ()
 {
     func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
 } # func_len may be replaced by extended shell implementation
 
 
 # func_lo2o object
 func_lo2o ()
 {
     func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
 } # func_lo2o may be replaced by extended shell implementation
 
 
 # func_xform libobj-or-source
 func_xform ()
 {
     func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
 } # func_xform may be replaced by extended shell implementation
 
 
 # func_fatal_configuration arg...
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
 func_fatal_configuration ()
 {
     func_error ${1+"$@"}
     func_error "See the $PACKAGE documentation for more information."
     func_fatal_error "Fatal configuration error."
 }
 
 
 # func_config
 # Display the configuration for all the tags in this script.
 func_config ()
 {
     re_begincf='^# ### BEGIN LIBTOOL'
     re_endcf='^# ### END LIBTOOL'
 
     # Default configuration.
     $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
 
     # Now print the configurations for the tags.
     for tagname in $taglist; do
       $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
     done
 
     exit $?
 }
 
 # func_features
 # Display the features supported by this script.
 func_features ()
 {
     echo "host: $host"
     if test "$build_libtool_libs" = yes; then
       echo "enable shared libraries"
     else
       echo "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
       echo "enable static libraries"
     else
       echo "disable static libraries"
     fi
 
     exit $?
 }
 
 # func_enable_tag tagname
 # Verify that TAGNAME is valid, and either flag an error and exit, or
 # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
 # variable here.
 func_enable_tag ()
 {
   # Global variable:
   tagname="$1"
 
   re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
   re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
   sed_extractcf="/$re_begincf/,/$re_endcf/p"
 
   # Validate tagname.
   case $tagname in
     *[!-_A-Za-z0-9,/]*)
       func_fatal_error "invalid tag name: $tagname"
       ;;        ;;
     esac
   
     # Don't test for the "default" C tag, as we know it's
     # there but not specially marked.
     case $tagname in
       CC) ;;
       *)
         if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
           taglist="$taglist $tagname"
   
           # Evaluate the configuration.  Be careful to quote the path
           # and the sed script, to avoid splitting on whitespace, but
           # also don't use non-portable quotes within backquotes within
           # quotes we have to do it in 2 steps:
           extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
           eval "$extractedcf"
         else
           func_error "ignoring unknown tag $tagname"
         fi
         ;;
     esac
   }
   
   # func_check_version_match
   # Ensure that we are using m4 macros, and libtool script from the same
   # release of libtool.
   func_check_version_match ()
   {
     if test "$package_revision" != "$macro_revision"; then
       if test "$VERSION" != "$macro_version"; then
         if test -z "$macro_version"; then
           cat >&2 <<_LT_EOF
   $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
   $progname: definition of this LT_INIT comes from an older release.
   $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
   $progname: and run autoconf again.
   _LT_EOF
         else
           cat >&2 <<_LT_EOF
   $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
   $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
   $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
   $progname: and run autoconf again.
   _LT_EOF
         fi
       else
         cat >&2 <<_LT_EOF
   $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
   $progname: but the definition of this LT_INIT comes from revision $macro_revision.
   $progname: You should recreate aclocal.m4 with macros from revision $package_revision
   $progname: of $PACKAGE $VERSION and run autoconf again.
   _LT_EOF
       fi
   
       exit $EXIT_MISMATCH
     fi
   }
   
   
   # Shorthand for --mode=foo, only valid as the first argument
   case $1 in
   clean|clea|cle|cl)
     shift; set dummy --mode clean ${1+"$@"}; shift
     ;;
   compile|compil|compi|comp|com|co|c)
     shift; set dummy --mode compile ${1+"$@"}; shift
     ;;
   execute|execut|execu|exec|exe|ex|e)
     shift; set dummy --mode execute ${1+"$@"}; shift
     ;;
   finish|finis|fini|fin|fi|f)
     shift; set dummy --mode finish ${1+"$@"}; shift
     ;;
   install|instal|insta|inst|ins|in|i)
     shift; set dummy --mode install ${1+"$@"}; shift
     ;;
   link|lin|li|l)
     shift; set dummy --mode link ${1+"$@"}; shift
     ;;
   uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
     shift; set dummy --mode uninstall ${1+"$@"}; shift
     ;;
   esac
   
   
   
   # Option defaults:
   opt_debug=:
   opt_dry_run=false
   opt_config=false
   opt_preserve_dup_deps=false
   opt_features=false
   opt_finish=false
   opt_help=false
   opt_help_all=false
   opt_silent=:
   opt_verbose=:
   opt_silent=false
   opt_verbose=false
   
   
   # Parse options once, thoroughly.  This comes as soon as possible in the
   # script to make things like `--version' happen as quickly as we can.
   {
     # this just eases exit handling
     while test $# -gt 0; do
       opt="$1"
       shift
       case $opt in
         --debug|-x)       opt_debug='set -x'
                           func_echo "enabling shell trace mode"
                           $opt_debug
                           ;;
         --dry-run|--dryrun|-n)
                           opt_dry_run=:
                           ;;
         --config)
                           opt_config=:
   func_config
                           ;;
         --dlopen|-dlopen)
                           optarg="$1"
                           opt_dlopen="${opt_dlopen+$opt_dlopen
   }$optarg"
                           shift
                           ;;
         --preserve-dup-deps)
                           opt_preserve_dup_deps=:
                           ;;
         --features)
                           opt_features=:
   func_features
                           ;;
         --finish)
                           opt_finish=:
   set dummy --mode finish ${1+"$@"}; shift
                           ;;
         --help)
                           opt_help=:
                           ;;
         --help-all)
                           opt_help_all=:
   opt_help=': help-all'
                           ;;
         --mode)
                           test $# = 0 && func_missing_arg $opt && break
                           optarg="$1"
                           opt_mode="$optarg"
   case $optarg in
     # Valid mode arguments:
     clean|compile|execute|finish|install|link|relink|uninstall) ;;
   
     # Catch anything else as an error
     *) func_error "invalid argument for $opt"
        exit_cmd=exit
        break
        ;;
   esac
                           shift
                           ;;
         --no-silent|--no-quiet)
                           opt_silent=false
   func_append preserve_args " $opt"
                           ;;
         --no-verbose)
                           opt_verbose=false
   func_append preserve_args " $opt"
                           ;;
         --silent|--quiet)
                           opt_silent=:
   func_append preserve_args " $opt"
           opt_verbose=false
                           ;;
         --verbose|-v)
                           opt_verbose=:
   func_append preserve_args " $opt"
   opt_silent=false
                           ;;
         --tag)
                           test $# = 0 && func_missing_arg $opt && break
                           optarg="$1"
                           opt_tag="$optarg"
   func_append preserve_args " $opt $optarg"
   func_enable_tag "$optarg"
                           shift
                           ;;
   
         -\?|-h)           func_usage                              ;;
         --help)           func_help                               ;;
         --version)        func_version                            ;;
   
         # Separate optargs to long options:
         --*=*)
                           func_split_long_opt "$opt"
                           set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
                           shift
                           ;;
   
         # Separate non-argument short options:
         -\?*|-h*|-n*|-v*)
                           func_split_short_opt "$opt"
                           set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
                           shift
                           ;;
   
         --)               break                                   ;;
         -*)               func_fatal_help "unrecognized option \`$opt'" ;;
         *)                set dummy "$opt" ${1+"$@"};     shift; break  ;;
     esac      esac
     done
   
     # Validate options:
   
     # save first non-option argument
     if test "$#" -gt 0; then
       nonopt="$opt"
       shift
     fi
   
     # preserve --debug
     test "$opt_debug" = : || func_append preserve_args " --debug"
   
     case $host in
       *cygwin* | *mingw* | *pw32* | *cegcc*)
         # don't eliminate duplications in $postdeps and $predeps
         opt_duplicate_compiler_generated_deps=:
         ;;
       *)
         opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
         ;;
     esac
   
     $opt_help || {
       # Sanity checks first:
       func_check_version_match
   
       if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
         func_fatal_configuration "not configured to build any kind of library"
       fi
   
       # Darwin sucks
       eval std_shrext=\"$shrext_cmds\"
   
       # Only execute mode is allowed to have -dlopen flags.
       if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
         func_error "unrecognized option \`-dlopen'"
         $ECHO "$help" 1>&2
         exit $EXIT_FAILURE
       fi
   
       # Change the help message to a mode-specific one.
       generic_help="$help"
       help="Try \`$progname --help --mode=$opt_mode' for more information."
     }
   
   
     # Bail if the options were screwed
     $exit_cmd $EXIT_FAILURE
   }
   
   
   
   
   ## ----------- ##
   ##    Main.    ##
   ## ----------- ##
   
   # func_lalib_p file
   # True iff FILE is a libtool `.la' library or `.lo' object file.
   # This function is only a basic sanity check; it will hardly flush out
   # determined imposters.
   func_lalib_p ()
   {
       test -f "$1" &&
         $SED -e 4q "$1" 2>/dev/null \
           | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
   }
   
   # func_lalib_unsafe_p file
   # True iff FILE is a libtool `.la' library or `.lo' object file.
   # This function implements the same check as func_lalib_p without
   # resorting to external programs.  To this end, it redirects stdin and
   # closes it afterwards, without saving the original file descriptor.
   # As a safety measure, use it only where a negative result would be
   # fatal anyway.  Works if `file' does not exist.
   func_lalib_unsafe_p ()
   {
       lalib_p=no
       if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
           for lalib_p_l in 1 2 3 4
           do
               read lalib_p_line
               case "$lalib_p_line" in
                   \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
               esac
           done
           exec 0<&5 5<&-
       fi
       test "$lalib_p" = yes
   }
   
   # func_ltwrapper_script_p file
   # True iff FILE is a libtool wrapper script
   # This function is only a basic sanity check; it will hardly flush out
   # determined imposters.
   func_ltwrapper_script_p ()
   {
       func_lalib_p "$1"
   }
   
   # func_ltwrapper_executable_p file
   # True iff FILE is a libtool wrapper executable
   # This function is only a basic sanity check; it will hardly flush out
   # determined imposters.
   func_ltwrapper_executable_p ()
   {
       func_ltwrapper_exec_suffix=
       case $1 in
       *.exe) ;;
       *) func_ltwrapper_exec_suffix=.exe ;;
       esac
       $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
   }
   
   # func_ltwrapper_scriptname file
   # Assumes file is an ltwrapper_executable
   # uses $file to determine the appropriate filename for a
   # temporary ltwrapper_script.
   func_ltwrapper_scriptname ()
   {
       func_dirname_and_basename "$1" "" "."
       func_stripname '' '.exe' "$func_basename_result"
       func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
   }
   
   # func_ltwrapper_p file
   # True iff FILE is a libtool wrapper script or wrapper executable
   # This function is only a basic sanity check; it will hardly flush out
   # determined imposters.
   func_ltwrapper_p ()
   {
       func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
   }
   
   
   # func_execute_cmds commands fail_cmd
   # Execute tilde-delimited COMMANDS.
   # If FAIL_CMD is given, eval that upon failure.
   # FAIL_CMD may read-access the current command in variable CMD!
   func_execute_cmds ()
   {
       $opt_debug
       save_ifs=$IFS; IFS='~'
       for cmd in $1; do
         IFS=$save_ifs
         eval cmd=\"$cmd\"
         func_show_eval "$cmd" "${2-:}"
       done
       IFS=$save_ifs
   }
   
   
   # func_source file
   # Source FILE, adding directory component if necessary.
   # Note that it is not necessary on cygwin/mingw to append a dot to
   # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
   # behavior happens only for exec(3), not for open(2)!  Also, sourcing
   # `FILE.' does not work on cygwin managed mounts.
   func_source ()
   {
       $opt_debug
       case $1 in
       */* | *\\*) . "$1" ;;
       *)          . "./$1" ;;
       esac
   }
   
   
   # func_resolve_sysroot PATH
   # Replace a leading = in PATH with a sysroot.  Store the result into
   # func_resolve_sysroot_result
   func_resolve_sysroot ()
   {
     func_resolve_sysroot_result=$1
     case $func_resolve_sysroot_result in
     =*)
       func_stripname '=' '' "$func_resolve_sysroot_result"
       func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
     ;;      ;;
   esac    esac
   $echo $win32_libid_type  
 }  }
   
   # func_replace_sysroot PATH
   # If PATH begins with the sysroot, replace it with = and
   # store the result into func_replace_sysroot_result.
   func_replace_sysroot ()
   {
     case "$lt_sysroot:$1" in
     ?*:"$lt_sysroot"*)
       func_stripname "$lt_sysroot" '' "$1"
       func_replace_sysroot_result="=$func_stripname_result"
       ;;
     *)
       # Including no sysroot.
       func_replace_sysroot_result=$1
       ;;
     esac
   }
   
 # func_infer_tag arg  # func_infer_tag arg
 # Infer tagged configuration to use if any are available and  # Infer tagged configuration to use if any are available and
Line 226  func_win32_libid () Line 1373  func_win32_libid ()
 # arg is usually of the form 'gcc ...'  # arg is usually of the form 'gcc ...'
 func_infer_tag ()  func_infer_tag ()
 {  {
       $opt_debug
     if test -n "$available_tags" && test -z "$tagname"; then      if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=        CC_quoted=
       for arg in $CC; do        for arg in $CC; do
        case $arg in        func_append_quoted CC_quoted "$arg"
          *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") 
          arg="\"$arg\"" 
          ;; 
        esac 
        CC_quoted="$CC_quoted $arg" 
       done        done
         CC_expanded=`func_echo_all $CC`
         CC_quoted_expanded=`func_echo_all $CC_quoted`
       case $@ in        case $@ in
       # Blanks in the command may have been stripped by the calling shell,        # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.        # but not from the CC environment variable when configure was run.
      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
       " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
       # Blanks at the start of $base_compile will cause this to fail        # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.        # if we don't check for them as well.
       *)        *)
         for z in $available_tags; do          for z in $available_tags; do
          if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
             # Evaluate the configuration.              # Evaluate the configuration.
             eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"              eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
             CC_quoted=              CC_quoted=
             for arg in $CC; do              for arg in $CC; do
            # Double-quote args containing other shell metacharacters.              # Double-quote args containing other shell metacharacters.
            case $arg in              func_append_quoted CC_quoted "$arg"
              *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")            done
              arg="\"$arg\""            CC_expanded=`func_echo_all $CC`
              ;;            CC_quoted_expanded=`func_echo_all $CC_quoted`
            esac 
            CC_quoted="$CC_quoted $arg" 
          done 
             case "$@ " in              case "$@ " in
              " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)            " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
             " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
               # The compiler in the base compile command matches                # The compiler in the base compile command matches
               # the one in the tagged configuration.                # the one in the tagged configuration.
               # Assume this is the tagged configuration we want.                # Assume this is the tagged configuration we want.
Line 272  func_infer_tag () Line 1416  func_infer_tag ()
         # was found and let the user know that the "--tag" command          # was found and let the user know that the "--tag" command
         # line option must be used.          # line option must be used.
         if test -z "$tagname"; then          if test -z "$tagname"; then
          $echo "$modename: unable to infer tagged configuration"          func_echo "unable to infer tagged configuration"
          $echo "$modename: specify a tag with \`--tag'" 1>&2          func_fatal_error "specify a tag with \`--tag'"
          exit $EXIT_FAILURE#        else
#        else#         func_verbose "using $tagname tagged configuration"
#          $echo "$modename: using $tagname tagged configuration" 
         fi          fi
         ;;          ;;
       esac        esac
Line 284  func_infer_tag () Line 1427  func_infer_tag ()
 }  }
   
   
# func_extract_an_archive dir oldlib
func_extract_an_archive ()# func_write_libtool_object output_name pic_name nonpic_name
 # Create a libtool object file (analogous to a ".la" file),
 # but don't create it if we're doing a dry run.
 func_write_libtool_object ()
 {  {
    f_ex_an_ar_dir="$1"; shift    write_libobj=${1}
    f_ex_an_ar_oldlib="$1"    if test "$build_libtool_libs" = yes; then
       write_lobj=\'${2}\'
     else
       write_lobj=none
     fi
   
    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"    if test "$build_old_libs" = yes; then
    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?      write_oldobj=\'${3}\'
    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then 
     : 
     else      else
      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2      write_oldobj=none
      exit $EXIT_FAILURE 
     fi      fi
   
       $opt_dry_run || {
         cat >${write_libobj}T <<EOF
   # $write_libobj - a libtool object file
   # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
   #
   # Please DO NOT delete this file!
   # It is necessary for linking the library.
   
   # Name of the PIC object.
   pic_object=$write_lobj
   
   # Name of the non-PIC object
   non_pic_object=$write_oldobj
   
   EOF
         $MV "${write_libobj}T" "${write_libobj}"
       }
 }  }
   
 # func_extract_archives gentop oldlib ...  
 func_extract_archives ()  
 {  
     my_gentop="$1"; shift  
     my_oldlibs=${1+"$@"}  
     my_oldobjs=""  
     my_xlib=""  
     my_xabs=""  
     my_xdir=""  
     my_status=""  
   
    $show "${rm}r $my_gentop"##################################################
    $run ${rm}r "$my_gentop"# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
    $show "$mkdir $my_gentop"##################################################
    $run $mkdir "$my_gentop"
    my_status=$?# func_convert_core_file_wine_to_w32 ARG
    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then# Helper function used by file name conversion functions when $build is *nix,
      exit $my_status# and $host is mingw, cygwin, or some other w32 environment. Relies on a
 # correctly configured wine environment available, with the winepath program
 # in $build's $PATH.
 #
 # ARG is the $build file name to be converted to w32 format.
 # Result is available in $func_convert_core_file_wine_to_w32_result, and will
 # be empty on error (or when ARG is empty)
 func_convert_core_file_wine_to_w32 ()
 {
   $opt_debug
   func_convert_core_file_wine_to_w32_result="$1"
   if test -n "$1"; then
     # Unfortunately, winepath does not exit with a non-zero error code, so we
     # are forced to check the contents of stdout. On the other hand, if the
     # command is not found, the shell will set an exit code of 127 and print
     # *an error message* to stdout. So we must check for both error code of
     # zero AND non-empty stdout, which explains the odd construction:
     func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
     if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
       func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
         $SED -e "$lt_sed_naive_backslashify"`
     else
       func_convert_core_file_wine_to_w32_result=
     fi      fi
     fi
   }
   # end: func_convert_core_file_wine_to_w32
   
     for my_xlib in $my_oldlibs; do  
       # Extract the objects.  
       case $my_xlib in  
         [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;  
         *) my_xabs=`pwd`"/$my_xlib" ;;  
       esac  
       my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`  
       my_xdir="$my_gentop/$my_xlib"  
   
      $show "${rm}r $my_xdir"# func_convert_core_path_wine_to_w32 ARG
      $run ${rm}r "$my_xdir"# Helper function used by path conversion functions when $build is *nix, and
      $show "$mkdir $my_xdir"# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
      $run $mkdir "$my_xdir"# configured wine environment available, with the winepath program in $build's
      exit_status=$?# $PATH. Assumes ARG has no leading or trailing path separator characters.
      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then#
        exit $exit_status# ARG is path to be converted from $build format to win32.
 # Result is available in $func_convert_core_path_wine_to_w32_result.
 # Unconvertible file (directory) names in ARG are skipped; if no directory names
 # are convertible, then the result may be empty.
 func_convert_core_path_wine_to_w32 ()
 {
   $opt_debug
   # unfortunately, winepath doesn't convert paths, only file names
   func_convert_core_path_wine_to_w32_result=""
   if test -n "$1"; then
     oldIFS=$IFS
     IFS=:
     for func_convert_core_path_wine_to_w32_f in $1; do
       IFS=$oldIFS
       func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
       if test -n "$func_convert_core_file_wine_to_w32_result" ; then
         if test -z "$func_convert_core_path_wine_to_w32_result"; then
           func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
         else
           func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
         fi
       fi        fi
       case $host in  
       *-darwin*)  
         $show "Extracting $my_xabs"  
         # Do not bother doing anything if just a dry run  
         if test -z "$run"; then  
           darwin_orig_dir=`pwd`  
           cd $my_xdir || exit $?  
           darwin_archive=$my_xabs  
           darwin_curdir=`pwd`  
           darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`  
           darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`  
           if test -n "$darwin_arches"; then   
             darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`  
             darwin_arch=  
             $show "$darwin_base_archive has multiple architectures $darwin_arches"  
             for darwin_arch in  $darwin_arches ; do  
               mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"  
               lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"  
               cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"  
               func_extract_an_archive "`pwd`" "${darwin_base_archive}"  
               cd "$darwin_curdir"  
               $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"  
             done # $darwin_arches  
       ## Okay now we have a bunch of thin objects, gotta fatten them up :)  
             darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`  
             darwin_file=  
             darwin_files=  
             for darwin_file in $darwin_filelist; do  
               darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`  
               lipo -create -output "$darwin_file" $darwin_files  
             done # $darwin_filelist  
             ${rm}r unfat-$$  
             cd "$darwin_orig_dir"  
           else  
             cd "$darwin_orig_dir"  
             func_extract_an_archive "$my_xdir" "$my_xabs"  
           fi # $darwin_arches  
         fi # $run  
         ;;  
       *)  
         func_extract_an_archive "$my_xdir" "$my_xabs"  
         ;;  
       esac  
       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`  
     done      done
    func_extract_archives_result="$my_oldobjs"    IFS=$oldIFS
   fi
 }  }
# End of Shell function definitions# end: func_convert_core_path_wine_to_w32
##################################### 
   
 # Darwin sucks  
 eval std_shrext=\"$shrext_cmds\"  
   
disable_libs=no# func_cygpath ARGS...
 # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
 # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
 # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
 # (2), returns the Cygwin file name or path in func_cygpath_result (input
 # file name or path is assumed to be in w32 format, as previously converted
 # from $build's *nix or MSYS format). In case (3), returns the w32 file name
 # or path in func_cygpath_result (input file name or path is assumed to be in
 # Cygwin format). Returns an empty string on error.
 #
 # ARGS are passed to cygpath, with the last one being the file name or path to
 # be converted.
 #
 # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
 # environment variable; do not put it in $PATH.
 func_cygpath ()
 {
   $opt_debug
   if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
     func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
     if test "$?" -ne 0; then
       # on failure, ensure result is empty
       func_cygpath_result=
     fi
   else
     func_cygpath_result=
     func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
   fi
 }
 #end: func_cygpath
   
 # Parse our command line options once, thoroughly.  
 while test "$#" -gt 0  
 do  
   arg="$1"  
   shift  
   
  case $arg in# func_convert_core_msys_to_w32 ARG
  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;# Convert file name or path ARG from MSYS format to w32 format.  Return
  *) optarg= ;;# result in func_convert_core_msys_to_w32_result.
 func_convert_core_msys_to_w32 ()
 {
   $opt_debug
   # awkward: cmd appends spaces to result
   func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
     $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
 }
 #end: func_convert_core_msys_to_w32
 
 
 # func_convert_file_check ARG1 ARG2
 # Verify that ARG1 (a file name in $build format) was converted to $host
 # format in ARG2. Otherwise, emit an error message, but continue (resetting
 # func_to_host_file_result to ARG1).
 func_convert_file_check ()
 {
   $opt_debug
   if test -z "$2" && test -n "$1" ; then
     func_error "Could not determine host file name corresponding to"
     func_error "  \`$1'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback:
     func_to_host_file_result="$1"
   fi
 }
 # end func_convert_file_check
 
 
 # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
 # Verify that FROM_PATH (a path in $build format) was converted to $host
 # format in TO_PATH. Otherwise, emit an error message, but continue, resetting
 # func_to_host_file_result to a simplistic fallback value (see below).
 func_convert_path_check ()
 {
   $opt_debug
   if test -z "$4" && test -n "$3"; then
     func_error "Could not determine the host path corresponding to"
     func_error "  \`$3'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback.  This is a deliberately simplistic "conversion" and
     # should not be "improved".  See libtool.info.
     if test "x$1" != "x$2"; then
       lt_replace_pathsep_chars="s|$1|$2|g"
       func_to_host_path_result=`echo "$3" |
         $SED -e "$lt_replace_pathsep_chars"`
     else
       func_to_host_path_result="$3"
     fi
   fi
 }
 # end func_convert_path_check
 
 
 # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
 # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
 # and appending REPL if ORIG matches BACKPAT.
 func_convert_path_front_back_pathsep ()
 {
   $opt_debug
   case $4 in
   $1 ) func_to_host_path_result="$3$func_to_host_path_result"
     ;;
   esac    esac
     case $4 in
     $2 ) func_append func_to_host_path_result "$3"
       ;;
     esac
   }
   # end func_convert_path_front_back_pathsep
   
   # If the previous option needs an argument, assign it.  
   if test -n "$prev"; then  
     case $prev in  
     execute_dlfiles)  
       execute_dlfiles="$execute_dlfiles $arg"  
       ;;  
     tag)  
       tagname="$arg"  
       preserve_args="${preserve_args}=$arg"  
   
      # Check whether tagname contains only valid characters##################################################
      case $tagname in# $build to $host FILE NAME CONVERSION FUNCTIONS #
      *[!-_A-Za-z0-9,/]*)##################################################
        $echo "$progname: invalid tag name: $tagname" 1>&2# invoked via `$to_host_file_cmd ARG'
        exit $EXIT_FAILURE#
        ;;# In each case, ARG is the path to be converted from $build to $host format.
      esac# Result will be available in $func_to_host_file_result.
   
      case $tagname in
      CC)# func_to_host_file ARG
        # Don't test for the "default" C tag, as we know, it's there, but# Converts the file name ARG from $build format to $host format. Return result
        # not specially marked.# in func_to_host_file_result.
        ;;func_to_host_file ()
      *){
        if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then  $opt_debug
          taglist="$taglist $tagname"  $to_host_file_cmd "$1"
          # Evaluate the configuration.}
          eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"# end func_to_host_file
        else
          $echo "$progname: ignoring unknown tag $tagname" 1>&2
        fi# func_to_tool_file ARG LAZY
        ;;# converts the file name ARG from $build format to toolchain format. Return
      esac# result in func_to_tool_file_result.  If the conversion in use is listed
 # in (the comma separated) LAZY, no conversion takes place.
 func_to_tool_file ()
 {
   $opt_debug
   case ,$2, in
     *,"$to_tool_file_cmd",*)
       func_to_tool_file_result=$1
       ;;        ;;
     *)      *)
      eval "$prev=\$arg"      $to_tool_file_cmd "$1"
       func_to_tool_file_result=$func_to_host_file_result
       ;;        ;;
    esac  esac
 }
 # end func_to_tool_file
   
    prev=
    prevopt=# func_convert_file_noop ARG
    continue# Copy ARG to func_to_host_file_result.
 func_convert_file_noop ()
 {
   func_to_host_file_result="$1"
 }
 # end func_convert_file_noop
 
 
 # func_convert_file_msys_to_w32 ARG
 # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
 # conversion to w32 is not available inside the cwrapper.  Returns result in
 # func_to_host_file_result.
 func_convert_file_msys_to_w32 ()
 {
   $opt_debug
   func_to_host_file_result="$1"
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
     func_to_host_file_result="$func_convert_core_msys_to_w32_result"
   fi    fi
     func_convert_file_check "$1" "$func_to_host_file_result"
   }
   # end func_convert_file_msys_to_w32
   
   # Have we seen a non-optional argument yet?  
   case $arg in  
   --help)  
     show_help=yes  
     ;;  
   
  --version)# func_convert_file_cygwin_to_w32 ARG
    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"# Convert file name ARG from Cygwin to w32 format.  Returns result in
    $echo# func_to_host_file_result.
    $echo "Copyright (C) 2005  Free Software Foundation, Inc."func_convert_file_cygwin_to_w32 ()
    $echo "This is free software; see the source for copying conditions.  There is NO"{
    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."  $opt_debug
    exit $?  func_to_host_file_result="$1"
    ;;  if test -n "$1"; then
     # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
     # LT_CYGPATH in this case.
     func_to_host_file_result=`cygpath -m "$1"`
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
 # end func_convert_file_cygwin_to_w32
   
   --config)  
     ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath  
     # Now print the configurations for the tags.  
     for tagname in $taglist; do  
       ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"  
     done  
     exit $?  
     ;;  
   
  --debug)# func_convert_file_nix_to_w32 ARG
    $echo "$progname: enabling shell trace mode"# Convert file name ARG from *nix to w32 format.  Requires a wine environment
    set -x# and a working winepath. Returns result in func_to_host_file_result.
    preserve_args="$preserve_args $arg"func_convert_file_nix_to_w32 ()
    ;;{
   $opt_debug
   func_to_host_file_result="$1"
   if test -n "$1"; then
     func_convert_core_file_wine_to_w32 "$1"
     func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
 # end func_convert_file_nix_to_w32
   
   --dry-run | -n)  
     run=:  
     ;;  
   
  --features)# func_convert_file_msys_to_cygwin ARG
    $echo "host: $host"# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
    if test "$build_libtool_libs" = yes; then# Returns result in func_to_host_file_result.
      $echo "enable shared libraries"func_convert_file_msys_to_cygwin ()
    else{
      $echo "disable shared libraries"  $opt_debug
    fi  func_to_host_file_result="$1"
    if test "$build_old_libs" = yes; then  if test -n "$1"; then
      $echo "enable static libraries"    func_convert_core_msys_to_w32 "$1"
    else    func_cygpath -u "$func_convert_core_msys_to_w32_result"
      $echo "disable static libraries"    func_to_host_file_result="$func_cygpath_result"
    fi  fi
    exit $?  func_convert_file_check "$1" "$func_to_host_file_result"
    ;;}
 # end func_convert_file_msys_to_cygwin
   
   --finish) mode="finish" ;;  
   
  --mode) prevopt="--mode" prev=mode ;;# func_convert_file_nix_to_cygwin ARG
  --mode=*) mode="$optarg" ;;# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
 # in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
 # in func_to_host_file_result.
 func_convert_file_nix_to_cygwin ()
 {
   $opt_debug
   func_to_host_file_result="$1"
   if test -n "$1"; then
     # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
     func_convert_core_file_wine_to_w32 "$1"
     func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
     func_to_host_file_result="$func_cygpath_result"
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
 # end func_convert_file_nix_to_cygwin
   
   --preserve-dup-deps) duplicate_deps="yes" ;;  
   
  --quiet | --silent)#############################################
    show=:# $build to $host PATH CONVERSION FUNCTIONS #
    preserve_args="$preserve_args $arg"#############################################
    ;;# invoked via `$to_host_path_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # The result will be available in $func_to_host_path_result.
 #
 # Path separators are also converted from $build format to $host format.  If
 # ARG begins or ends with a path separator character, it is preserved (but
 # converted to $host format) on output.
 #
 # All path conversion functions are named using the following convention:
 #   file name conversion function    : func_convert_file_X_to_Y ()
 #   path conversion function         : func_convert_path_X_to_Y ()
 # where, for any given $build/$host combination the 'X_to_Y' value is the
 # same.  If conversion functions are added for new $build/$host combinations,
 # the two new functions must follow this pattern, or func_init_to_host_path_cmd
 # will break.
   
   --tag)  
     prevopt="--tag"  
     prev=tag  
     preserve_args="$preserve_args --tag"  
     ;;  
   --tag=*)  
     set tag "$optarg" ${1+"$@"}  
     shift  
     prev=tag  
     preserve_args="$preserve_args --tag"  
     ;;  
   
  -dlopen)# func_init_to_host_path_cmd
    prevopt="-dlopen"# Ensures that function "pointer" variable $to_host_path_cmd is set to the
    prev=execute_dlfiles# appropriate value, based on the value of $to_host_file_cmd.
    ;;to_host_path_cmd=
 func_init_to_host_path_cmd ()
 {
   $opt_debug
   if test -z "$to_host_path_cmd"; then
     func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
     to_host_path_cmd="func_convert_path_${func_stripname_result}"
   fi
 }
   
   -*)  
     $echo "$modename: unrecognized option \`$arg'" 1>&2  
     $echo "$help" 1>&2  
     exit $EXIT_FAILURE  
     ;;  
   
  *)# func_to_host_path ARG
    nonopt="$arg"# Converts the path ARG from $build format to $host format. Return result
    break# in func_to_host_path_result.
    ;;func_to_host_path ()
  esac{
done  $opt_debug
   func_init_to_host_path_cmd
   $to_host_path_cmd "$1"
 }
 # end func_to_host_path
   
 if test -n "$prevopt"; then  
   $echo "$modename: option \`$prevopt' requires an argument" 1>&2  
   $echo "$help" 1>&2  
   exit $EXIT_FAILURE  
 fi  
   
case $disable_libs in# func_convert_path_noop ARG
no) # Copy ARG to func_to_host_path_result.
  ;;func_convert_path_noop ()
shared){
  build_libtool_libs=no  func_to_host_path_result="$1"
  build_old_libs=yes}
  ;;# end func_convert_path_noop
static) 
  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` 
  ;; 
esac 
   
 # If this variable is set in any of the actions, the command in it  
 # will be execed at the end.  This prevents here-documents from being  
 # left over by shells.  
 exec_cmd=  
   
if test -z "$show_help"; then# func_convert_path_msys_to_w32 ARG
 # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
 # conversion to w32 is not available inside the cwrapper.  Returns result in
 # func_to_host_path_result.
 func_convert_path_msys_to_w32 ()
 {
   $opt_debug
   func_to_host_path_result="$1"
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from ARG.  MSYS
     # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
     # and winepath ignores them completely.
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
     func_to_host_path_result="$func_convert_core_msys_to_w32_result"
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
   fi
 }
 # end func_convert_path_msys_to_w32
   
   # Infer the operation mode.  
   if test -z "$mode"; then  
     $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2  
     $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2  
     case $nonopt in  
     *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)  
       mode=link  
       for arg  
       do  
         case $arg in  
         -c)  
            mode=compile  
            break  
            ;;  
         esac  
       done  
       ;;  
     *db | *dbx | *strace | *truss)  
       mode=execute  
       ;;  
     *install*|cp|mv)  
       mode=install  
       ;;  
     *rm)  
       mode=uninstall  
       ;;  
     *)  
       # If we have no mode, but dlfiles were specified, then do execute mode.  
       test -n "$execute_dlfiles" && mode=execute  
   
      # Just use the default operation mode.# func_convert_path_cygwin_to_w32 ARG
      if test -z "$mode"; then# Convert path ARG from Cygwin to w32 format.  Returns result in
        if test -n "$nonopt"; then# func_to_host_file_result.
          $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2func_convert_path_cygwin_to_w32 ()
        else{
          $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2  $opt_debug
        fi  func_to_host_path_result="$1"
      fi  if test -n "$1"; then
      ;;    # See func_convert_path_msys_to_w32:
    esac    func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
   fi    fi
   }
   # end func_convert_path_cygwin_to_w32
   
  # Only execute mode is allowed to have -dlopen flags.
  if test -n "$execute_dlfiles" && test "$mode" != execute; then# func_convert_path_nix_to_w32 ARG
    $echo "$modename: unrecognized option \`-dlopen'" 1>&2# Convert path ARG from *nix to w32 format.  Requires a wine environment and
    $echo "$help" 1>&2# a working winepath.  Returns result in func_to_host_file_result.
    exit $EXIT_FAILUREfunc_convert_path_nix_to_w32 ()
 {
   $opt_debug
   func_to_host_path_result="$1"
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
     func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
   fi    fi
   }
   # end func_convert_path_nix_to_w32
   
   # Change the help message to a mode-specific one.  
   generic_help="$help"  
   help="Try \`$modename --help --mode=$mode' for more information."  
   
  # These modes are in order of execution frequency so that they run quickly.# func_convert_path_msys_to_cygwin ARG
  case $mode in# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
  # libtool compile mode# Returns result in func_to_host_file_result.
  compile)func_convert_path_msys_to_cygwin ()
    modename="$modename: compile"{
   $opt_debug
   func_to_host_path_result="$1"
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
     func_to_host_path_result="$func_cygpath_result"
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
   fi
 }
 # end func_convert_path_msys_to_cygwin
 
 
 # func_convert_path_nix_to_cygwin ARG
 # Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
 # a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
 # func_to_host_file_result.
 func_convert_path_nix_to_cygwin ()
 {
   $opt_debug
   func_to_host_path_result="$1"
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from
     # ARG. msys behavior is inconsistent here, cygpath turns them
     # into '.;' and ';.', and winepath ignores them completely.
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
     func_to_host_path_result="$func_cygpath_result"
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
   fi
 }
 # end func_convert_path_nix_to_cygwin
 
 
 # func_mode_compile arg...
 func_mode_compile ()
 {
     $opt_debug
     # Get the compilation command and the source file.      # Get the compilation command and the source file.
     base_compile=      base_compile=
     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"      srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
Line 629  if test -z "$show_help"; then Line 1957  if test -z "$show_help"; then
     arg_mode=normal      arg_mode=normal
     libobj=      libobj=
     later=      later=
       pie_flag=
   
     for arg      for arg
     do      do
Line 649  if test -z "$show_help"; then Line 1978  if test -z "$show_help"; then
         # Accept any command-line options.          # Accept any command-line options.
         case $arg in          case $arg in
         -o)          -o)
          if test -n "$libobj" ; then          test -n "$libobj" && \
            $echo "$modename: you cannot specify \`-o' more than once" 1>&2            func_fatal_error "you cannot specify \`-o' more than once"
            exit $EXIT_FAILURE 
          fi 
           arg_mode=target            arg_mode=target
           continue            continue
           ;;            ;;
   
        -static | -prefer-pic | -prefer-non-pic)        -pie | -fpie | -fPIE)
          later="$later $arg"          func_append pie_flag " $arg"
           continue            continue
           ;;            ;;
   
           -shared | -static | -prefer-pic | -prefer-non-pic)
             func_append later " $arg"
             continue
             ;;
   
         -no-suppress)          -no-suppress)
           suppress_opt=no            suppress_opt=no
           continue            continue
Line 673  if test -z "$show_help"; then Line 2005  if test -z "$show_help"; then
           ;;            #  replaced later.  I would guess that would be a bug.            ;;            #  replaced later.  I would guess that would be a bug.
   
         -Wc,*)          -Wc,*)
          args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`          func_stripname '-Wc,' '' "$arg"
           args=$func_stripname_result
           lastarg=            lastarg=
           save_ifs="$IFS"; IFS=','            save_ifs="$IFS"; IFS=','
          for arg in $args; do          for arg in $args; do
             IFS="$save_ifs"              IFS="$save_ifs"
            func_append_quoted lastarg "$arg"
            # Double-quote args containing other shell metacharacters. 
            # Many Bourne shells cannot handle close brackets correctly 
            # in scan sets, so we specify it separately. 
            case $arg in 
              *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"") 
              arg="\"$arg\"" 
              ;; 
            esac 
            lastarg="$lastarg $arg" 
           done            done
           IFS="$save_ifs"            IFS="$save_ifs"
          lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`          func_stripname ' ' '' "$lastarg"
           lastarg=$func_stripname_result
   
           # Add the arguments to base_compile.            # Add the arguments to base_compile.
          base_compile="$base_compile $lastarg"          func_append base_compile " $lastarg"
           continue            continue
           ;;            ;;
   
        * )        *)
           # Accept the current argument as the source file.            # Accept the current argument as the source file.
           # The previous "srcfile" becomes the current argument.            # The previous "srcfile" becomes the current argument.
           #            #
Line 709  if test -z "$show_help"; then Line 2034  if test -z "$show_help"; then
       esac    #  case $arg_mode        esac    #  case $arg_mode
   
       # Aesthetically quote the previous argument.        # Aesthetically quote the previous argument.
      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`      func_append_quoted base_compile "$lastarg"
 
      case $lastarg in 
      # Double-quote args containing other shell metacharacters. 
      # Many Bourne shells cannot handle close brackets correctly 
      # in scan sets, and some SunOS ksh mistreat backslash-escaping 
      # in scan sets (worked around with variable expansion), 
      # and furthermore cannot handle '|' '&' '(' ')' in scan sets  
      # at all, so we specify them separately. 
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"") 
        lastarg="\"$lastarg\"" 
        ;; 
      esac 
 
      base_compile="$base_compile $lastarg" 
     done # for arg      done # for arg
   
     case $arg_mode in      case $arg_mode in
     arg)      arg)
      $echo "$modename: you must specify an argument for -Xcompile"      func_fatal_error "you must specify an argument for -Xcompile"
      exit $EXIT_FAILURE 
       ;;        ;;
     target)      target)
      $echo "$modename: you must specify a target with \`-o'" 1>&2      func_fatal_error "you must specify a target with \`-o'"
      exit $EXIT_FAILURE 
       ;;        ;;
     *)      *)
       # Get the name of the library object.        # Get the name of the library object.
      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`      test -z "$libobj" && {
         func_basename "$srcfile"
         libobj="$func_basename_result"
       }
       ;;        ;;
     esac      esac
   
     # Recognize several different file suffixes.      # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo      # If the user specifies -o file.o, it is replaced with file.lo
     xform='[cCFSifmso]'  
     case $libobj in      case $libobj in
    *.ada) xform=ada ;;    *.[cCFSifmso] | \
    *.adb) xform=adb ;;    *.ada | *.adb | *.ads | *.asm | \
    *.ads) xform=ads ;;    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
    *.asm) xform=asm ;;    *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
    *.c++) xform=c++ ;;      func_xform "$libobj"
    *.cc) xform=cc ;;      libobj=$func_xform_result
    *.ii) xform=ii ;;      ;;
    *.class) xform=class ;; 
    *.cpp) xform=cpp ;; 
    *.cxx) xform=cxx ;; 
    *.f90) xform=f90 ;; 
    *.for) xform=for ;; 
    *.java) xform=java ;; 
     esac      esac
   
     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`  
   
     case $libobj in      case $libobj in
    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)      *)
      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2      func_fatal_error "cannot determine name of library object from \`$libobj'"
      exit $EXIT_FAILURE 
       ;;        ;;
     esac      esac
   
Line 774  if test -z "$show_help"; then Line 2076  if test -z "$show_help"; then
   
     for arg in $later; do      for arg in $later; do
       case $arg in        case $arg in
         -shared)
           test "$build_libtool_libs" != yes && \
             func_fatal_configuration "can not build a shared library"
           build_old_libs=no
           continue
           ;;
   
       -static)        -static)
           build_libtool_libs=no
         build_old_libs=yes          build_old_libs=yes
         continue          continue
         ;;          ;;
Line 791  if test -z "$show_help"; then Line 2101  if test -z "$show_help"; then
       esac        esac
     done      done
   
    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`    func_quote_for_eval "$libobj"
    case $qlibobj in    test "X$libobj" != "X$func_quote_for_eval_result" \
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'     &()|`$[]' \
        qlibobj="\"$qlibobj\"" ;;      && func_warning "libobj name \`$libobj' may not contain shell special characters."
    esac    func_dirname_and_basename "$obj" "/" ""
    test "X$libobj" != "X$qlibobj" \    objname="$func_basename_result"
        && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"'    &()|`$[]' \    xdir="$func_dirname_result"
        && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." 
    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` 
    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` 
    if test "X$xdir" = "X$obj"; then 
      xdir= 
    else 
      xdir=$xdir/ 
    fi 
     lobj=${xdir}$objdir/$objname      lobj=${xdir}$objdir/$objname
   
    if test -z "$base_compile"; then    test -z "$base_compile" && \
      $echo "$modename: you must specify a compilation command" 1>&2      func_fatal_help "you must specify a compilation command"
      $echo "$help" 1>&2 
      exit $EXIT_FAILURE 
    fi 
   
     # Delete any leftover library objects.      # Delete any leftover library objects.
     if test "$build_old_libs" = yes; then      if test "$build_old_libs" = yes; then
Line 821  if test -z "$show_help"; then Line 2120  if test -z "$show_help"; then
       removelist="$lobj $libobj ${libobj}T"        removelist="$lobj $libobj ${libobj}T"
     fi      fi
   
     $run $rm $removelist  
     trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15  
   
     # On Cygwin there's no "real" PIC flag so we must build both object types      # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in      case $host_os in
    cygwin* | mingw* | pw32* | os2*)    cygwin* | mingw* | pw32* | os2* | cegcc*)
       pic_mode=default        pic_mode=default
       ;;        ;;
     esac      esac
Line 838  if test -z "$show_help"; then Line 2134  if test -z "$show_help"; then
     # Calculate the filename of the output object if compiler does      # Calculate the filename of the output object if compiler does
     # not support -o with -c      # not support -o with -c
     if test "$compiler_c_o" = no; then      if test "$compiler_c_o" = no; then
      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"        lockfile="$output_obj.lock"
       removelist="$removelist $output_obj $lockfile"  
       trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15  
     else      else
       output_obj=        output_obj=
       need_locks=no        need_locks=no
Line 851  if test -z "$show_help"; then Line 2145  if test -z "$show_help"; then
     # Lock this critical section if it is needed      # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file      # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then      if test "$need_locks" = yes; then
      until $run ln "$progpath" "$lockfile" 2>/dev/null; do      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
        $show "Waiting for $lockfile to be removed"        func_echo "Waiting for $lockfile to be removed"
         sleep 2          sleep 2
       done        done
     elif test "$need_locks" = warn; then      elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then        if test -f "$lockfile"; then
        $echo "\        $ECHO "\
 *** ERROR, $lockfile exists and contains:  *** ERROR, $lockfile exists and contains:
 `cat $lockfile 2>/dev/null`  `cat $lockfile 2>/dev/null`
   
Line 868  repeat this compilation, it may succeed, by chance, bu Line 2162  repeat this compilation, it may succeed, by chance, bu
 avoid parallel builds (make -j) in this platform, or get a better  avoid parallel builds (make -j) in this platform, or get a better
 compiler."  compiler."
   
        $run $rm $removelist        $opt_dry_run || $RM $removelist
         exit $EXIT_FAILURE          exit $EXIT_FAILURE
       fi        fi
      $echo "$srcfile" > "$lockfile"      func_append removelist " $output_obj"
       $ECHO "$srcfile" > "$lockfile"
     fi      fi
   
    if test -n "$fix_srcfile_path"; then    $opt_dry_run || $RM $removelist
      eval srcfile=\"$fix_srcfile_path\"    func_append removelist " $lockfile"
    fi    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` 
    case $qsrcfile in 
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"") 
      qsrcfile="\"$qsrcfile\"" ;; 
    esac 
   
    $run $rm "$libobj" "${libobj}T"    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
     srcfile=$func_to_tool_file_result
     func_quote_for_eval "$srcfile"
     qsrcfile=$func_quote_for_eval_result
   
     # Create a libtool object file (analogous to a ".la" file),  
     # but don't create it if we're doing a dry run.  
     test -z "$run" && cat > ${libobj}T <<EOF  
 # $libobj - a libtool object file  
 # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP  
 #  
 # Please DO NOT delete this file!  
 # It is necessary for linking the library.  
   
 # Name of the PIC object.  
 EOF  
   
     # Only build a PIC object if we are building libtool libraries.      # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then      if test "$build_libtool_libs" = yes; then
       # Without this assignment, base_compile gets emptied.        # Without this assignment, base_compile gets emptied.
Line 909  EOF Line 2190  EOF
         command="$base_compile $qsrcfile"          command="$base_compile $qsrcfile"
       fi        fi
   
      if test ! -d "${xdir}$objdir"; then      func_mkdir_p "$xdir$objdir"
        $show "$mkdir ${xdir}$objdir" 
        $run $mkdir ${xdir}$objdir 
        exit_status=$? 
        if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then 
          exit $exit_status 
        fi 
      fi 
   
       if test -z "$output_obj"; then        if test -z "$output_obj"; then
         # Place PIC objects in $objdir          # Place PIC objects in $objdir
        command="$command -o $lobj"        func_append command " -o $lobj"
       fi        fi
   
      $run $rm "$lobj" "$output_obj"      func_show_eval_locale "$command"  \
           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
   
       $show "$command"  
       if $run eval "$command"; then :  
       else  
         test -n "$output_obj" && $run $rm $removelist  
         exit $EXIT_FAILURE  
       fi  
   
       if test "$need_locks" = warn &&        if test "$need_locks" = warn &&
          test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then           test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        $echo "\        $ECHO "\
 *** ERROR, $lockfile contains:  *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`  `cat $lockfile 2>/dev/null`
   
Line 948  repeat this compilation, it may succeed, by chance, bu Line 2216  repeat this compilation, it may succeed, by chance, bu
 avoid parallel builds (make -j) in this platform, or get a better  avoid parallel builds (make -j) in this platform, or get a better
 compiler."  compiler."
   
        $run $rm $removelist        $opt_dry_run || $RM $removelist
         exit $EXIT_FAILURE          exit $EXIT_FAILURE
       fi        fi
   
       # Just move the object if needed, then go on to compile the next one        # Just move the object if needed, then go on to compile the next one
       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then        if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
        $show "$mv $output_obj $lobj"        func_show_eval '$MV "$output_obj" "$lobj"' \
        if $run $mv $output_obj $lobj; then :          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
        else 
          error=$? 
          $run $rm $removelist 
          exit $error 
        fi 
       fi        fi
   
       # Append the name of the PIC object to the libtool object file.  
       test -z "$run" && cat >> ${libobj}T <<EOF  
 pic_object='$objdir/$objname'  
   
 EOF  
   
       # Allow error messages only from the first compilation.        # Allow error messages only from the first compilation.
       if test "$suppress_opt" = yes; then        if test "$suppress_opt" = yes; then
        suppress_output=' >/dev/null 2>&1'        suppress_output=' >/dev/null 2>&1'
       fi        fi
     else  
       # No PIC object so indicate it doesn't exist in the libtool  
       # object file.  
       test -z "$run" && cat >> ${libobj}T <<EOF  
 pic_object=none  
   
 EOF  
     fi      fi
   
     # Only build a position-dependent object if we build old libraries.      # Only build a position-dependent object if we build old libraries.
     if test "$build_old_libs" = yes; then      if test "$build_old_libs" = yes; then
       if test "$pic_mode" != yes; then        if test "$pic_mode" != yes; then
         # Don't build PIC code          # Don't build PIC code
        command="$base_compile $qsrcfile"        command="$base_compile $qsrcfile$pie_flag"
       else        else
         command="$base_compile $qsrcfile $pic_flag"          command="$base_compile $qsrcfile $pic_flag"
       fi        fi
       if test "$compiler_c_o" = yes; then        if test "$compiler_c_o" = yes; then
        command="$command -o $obj"        func_append command " -o $obj"
       fi        fi
   
       # Suppress compiler output if we already did a PIC compilation.        # Suppress compiler output if we already did a PIC compilation.
      command="$command$suppress_output"      func_append command "$suppress_output"
      $run $rm "$obj" "$output_obj"      func_show_eval_locale "$command" \
      $show "$command"        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
      if $run eval "$command"; then : 
      else 
        $run $rm $removelist 
        exit $EXIT_FAILURE 
      fi 
   
       if test "$need_locks" = warn &&        if test "$need_locks" = warn &&
          test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then           test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        $echo "\        $ECHO "\
 *** ERROR, $lockfile contains:  *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`  `cat $lockfile 2>/dev/null`
   
Line 1020  repeat this compilation, it may succeed, by chance, bu Line 2265  repeat this compilation, it may succeed, by chance, bu
 avoid parallel builds (make -j) in this platform, or get a better  avoid parallel builds (make -j) in this platform, or get a better
 compiler."  compiler."
   
        $run $rm $removelist        $opt_dry_run || $RM $removelist
         exit $EXIT_FAILURE          exit $EXIT_FAILURE
       fi        fi
   
       # Just move the object if needed        # Just move the object if needed
       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then        if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
        $show "$mv $output_obj $obj"        func_show_eval '$MV "$output_obj" "$obj"' \
        if $run $mv $output_obj $obj; then :          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
       fi
     fi
 
     $opt_dry_run || {
       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
       # Unlock the critical section if it was locked
       if test "$need_locks" != no; then
         removelist=$lockfile
         $RM "$lockfile"
       fi
     }
 
     exit $EXIT_SUCCESS
 }
 
 $opt_help || {
   test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
 {
     # We need to display help for each of the modes.
     case $opt_mode in
       "")
         # Generic help is extracted from the usage comments
         # at the start of this file.
         func_help
         ;;
 
       clean)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
 
 Remove files from the build directory.
 
 RM is the name of the program to use to delete files associated with each FILE
 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 to RM.
 
 If FILE is a libtool library, object or program, all the files associated
 with it are deleted. Otherwise, only FILE itself is deleted using RM."
         ;;
 
       compile)
       $ECHO \
 "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
 
 Compile a source file into a libtool library object.
 
 This mode accepts the following additional options:
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes
   -prefer-pic       try to build PIC objects only
   -prefer-non-pic   try to build non-PIC objects only
   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking
   -Wc,FLAG          pass FLAG directly to the compiler
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
 
 The output file name is determined by removing the directory component from
 SOURCEFILE, then substituting the C source code suffix \`.c' with the
 library object suffix, \`.lo'."
         ;;
 
       execute)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
 
 Automatically set library path, then run a program.
 
 This mode accepts the following additional options:
 
   -dlopen FILE      add the directory containing FILE to the library path
 
 This mode sets the library path environment variable according to \`-dlopen'
 flags.
 
 If any of the ARGS are libtool executable wrappers, then they are translated
 into their corresponding uninstalled binary, and any of their required library
 directories are added to the library path.
 
 Then, COMMAND is executed, with ARGS as arguments."
         ;;
 
       finish)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
 
 Complete the installation of libtool libraries.
 
 Each LIBDIR is a directory that contains libtool libraries.
 
 The commands that this mode executes may require superuser privileges.  Use
 the \`--dry-run' option if you just want to see what would be executed."
         ;;
 
       install)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
 
 Install executables or libraries.
 
 INSTALL-COMMAND is the installation command.  The first component should be
 either the \`install' or \`cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
   -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
         ;;
 
       link)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
 
 Link object files or libraries together to form another library, or to
 create an executable program.
 
 LINK-COMMAND is a command using the C compiler that you would use to create
 a program from several object files.
 
 The following components of LINK-COMMAND are treated specially:
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible
   -bindir BINDIR    specify path to binaries directory (for systems where
                     libraries must be found in the PATH setting at runtime)
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
                     try to export only the symbols listed in SYMFILE
   -export-symbols-regex REGEX
                     try to export only the symbols matching REGEX
   -LLIBDIR          search LIBDIR for required installed libraries
   -lNAME            OUTPUT-FILE requires the installed library libNAME
   -module           build a library that can dlopened
   -no-fast-install  disable the fast-install mode
   -no-install       link a not-installable executable
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
   -objectlist FILE  Use a list of object files found in FILE to specify objects
   -precious-files-regex REGEX
                     don't remove output files matching REGEX
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
   -shared           only do dynamic linking of libtool libraries
   -shrext SUFFIX    override the standard shared library file extension
   -static           do not do any dynamic linking of uninstalled libtool libraries
   -static-libtool-libs
                     do not do any dynamic linking of libtool libraries
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface
   -Wc,FLAG
   -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
   -Wl,FLAG
   -Xlinker FLAG     pass linker-specific FLAG directly to the linker
   -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
 All other options (arguments beginning with \`-') are ignored.
 
 Every other argument is treated as a filename.  Files ending in \`.la' are
 treated as uninstalled libtool libraries, other files are standard or library
 object files.
 
 If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
 only library objects (\`.lo' files) may be specified, and \`-rpath' is
 required, except when creating a convenience library.
 
 If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
 using \`ar' and \`ranlib', or on Windows using \`lib'.
 
 If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
 is created, otherwise an executable program is created."
         ;;
 
       uninstall)
         $ECHO \
 "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
 
 Remove libraries from an installation directory.
 
 RM is the name of the program to use to delete files associated with each FILE
 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
 to RM.
 
 If FILE is a libtool library, all the files associated with it are deleted.
 Otherwise, only FILE itself is deleted using RM."
         ;;
 
       *)
         func_fatal_help "invalid operation mode \`$opt_mode'"
         ;;
     esac
 
     echo
     $ECHO "Try \`$progname --help' for more information about other modes."
 }
 
 # Now that we've collected a possible --mode arg, show help if necessary
 if $opt_help; then
   if test "$opt_help" = :; then
     func_mode_help
   else
     {
       func_help noexit
       for opt_mode in compile link execute install finish uninstall clean; do
         func_mode_help
       done
     } | sed -n '1p; 2,$s/^Usage:/  or: /p'
     {
       func_help noexit
       for opt_mode in compile link execute install finish uninstall clean; do
         echo
         func_mode_help
       done
     } |
     sed '1d
       /^When reporting/,/^Report/{
         H
         d
       }
       $x
       /information about other modes/d
       /more detailed .*MODE/d
       s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
   fi
   exit $?
 fi
 
 
 # func_mode_execute arg...
 func_mode_execute ()
 {
     $opt_debug
     # The first argument is the command name.
     cmd="$nonopt"
     test -z "$cmd" && \
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
     for file in $opt_dlopen; do
       test -f "$file" \
         || func_fatal_help "\`$file' is not a file"
 
       dir=
       case $file in
       *.la)
         func_resolve_sysroot "$file"
         file=$func_resolve_sysroot_result
 
         # Check to see that this really is a libtool archive.
         func_lalib_unsafe_p "$file" \
           || func_fatal_help "\`$lib' is not a valid libtool archive"
 
         # Read the libtool library.
         dlname=
         library_names=
         func_source "$file"
 
         # Skip this library if it cannot be dlopened.
         if test -z "$dlname"; then
           # Warn if it was a shared library.
           test -n "$library_names" && \
             func_warning "\`$file' was not linked with \`-export-dynamic'"
           continue
         fi
 
         func_dirname "$file" "" "."
         dir="$func_dirname_result"
 
         if test -f "$dir/$objdir/$dlname"; then
           func_append dir "/$objdir"
         else          else
          error=$?          if test ! -f "$dir/$dlname"; then
          $run $rm $removelist            func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
          exit $error          fi
         fi          fi
           ;;
   
         *.lo)
           # Just add the directory containing the .lo file.
           func_dirname "$file" "" "."
           dir="$func_dirname_result"
           ;;
   
         *)
           func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
           continue
           ;;
         esac
   
         # Get the absolute pathname.
         absdir=`cd "$dir" && pwd`
         test -n "$absdir" && dir="$absdir"
   
         # Now add the directory to shlibpath_var.
         if eval "test -z \"\$$shlibpath_var\""; then
           eval "$shlibpath_var=\"\$dir\""
         else
           eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
       fi        fi
       done
   
      # Append the name of the non-PIC object the libtool object file.    # This variable tells wrapper scripts just to set shlibpath_var
      # Only append if the libtool object file exists.    # rather than running their programs.
      test -z "$run" && cat >> ${libobj}T <<EOF    libtool_execute_magic="$magic"
# Name of the non-PIC object. 
non_pic_object='$objname' 
   
EOF    # Check if any of the arguments is a wrapper script.
    else    args=
      # Append the name of the non-PIC object the libtool object file.    for file
      # Only append if the libtool object file exists.    do
      test -z "$run" && cat >> ${libobj}T <<EOF      case $file in
# Name of the non-PIC object.      -* | *.la | *.lo ) ;;
non_pic_object=none      *)
         # Do a test to see if this is really a libtool program.
         if func_ltwrapper_script_p "$file"; then
           func_source "$file"
           # Transform arg to wrapped name.
           file="$progdir/$program"
         elif func_ltwrapper_executable_p "$file"; then
           func_ltwrapper_scriptname "$file"
           func_source "$func_ltwrapper_scriptname_result"
           # Transform arg to wrapped name.
           file="$progdir/$program"
         fi
         ;;
       esac
       # Quote arguments (to preserve shell metacharacters).
       func_append_quoted args "$file"
     done
   
EOF    if test "X$opt_dry_run" = Xfalse; then
       if test -n "$shlibpath_var"; then
         # Export the shlibpath_var.
         eval "export $shlibpath_var"
       fi
 
       # Restore saved environment variables
       for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
       do
         eval "if test \"\${save_$lt_var+set}\" = set; then
                 $lt_var=\$save_$lt_var; export $lt_var
               else
                 $lt_unset $lt_var
               fi"
       done
 
       # Now prepare to actually exec the command.
       exec_cmd="\$cmd$args"
     else
       # Display what would be done.
       if test -n "$shlibpath_var"; then
         eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
         echo "export $shlibpath_var"
       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
     fi      fi
   }
   
    $run $mv "${libobj}T" "${libobj}"test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
   
    # Unlock the critical section if it was locked
    if test "$need_locks" != no; then# func_mode_finish arg...
      $run $rm "$lockfile"func_mode_finish ()
 {
     $opt_debug
     libs=
     libdirs=
     admincmds=
 
     for opt in "$nonopt" ${1+"$@"}
     do
       if test -d "$opt"; then
         func_append libdirs " $opt"
 
       elif test -f "$opt"; then
         if func_lalib_unsafe_p "$opt"; then
           func_append libs " $opt"
         else
           func_warning "\`$opt' is not a valid libtool archive"
         fi
 
       else
         func_fatal_error "invalid argument \`$opt'"
       fi
     done
 
     if test -n "$libs"; then
       if test -n "$lt_sysroot"; then
         sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
         sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
       else
         sysroot_cmd=
       fi
 
       # Remove sysroot references
       if $opt_dry_run; then
         for lib in $libs; do
           echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
         done
       else
         tmpdir=`func_mktempdir`
         for lib in $libs; do
           sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
             > $tmpdir/tmp-la
           mv -f $tmpdir/tmp-la $lib
         done
         ${RM}r "$tmpdir"
       fi
     fi      fi
   
       if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
         for libdir in $libdirs; do
           if test -n "$finish_cmds"; then
             # Do each command in the finish commands.
             func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
   '"$cmd"'"'
           fi
           if test -n "$finish_eval"; then
             # Do the single finish_eval.
             eval cmds=\"$finish_eval\"
             $opt_dry_run || eval "$cmds" || func_append admincmds "
          $cmds"
           fi
         done
       fi
   
       # Exit here if they wanted silent mode.
       $opt_silent && exit $EXIT_SUCCESS
   
       if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
         echo "----------------------------------------------------------------------"
         echo "Libraries have been installed in:"
         for libdir in $libdirs; do
           $ECHO "   $libdir"
         done
         echo
         echo "If you ever happen to want to link against installed libraries"
         echo "in a given directory, LIBDIR, you must either use libtool, and"
         echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
         echo "flag during linking and do at least one of the following:"
         if test -n "$shlibpath_var"; then
           echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
           echo "     during execution"
         fi
         if test -n "$runpath_var"; then
           echo "   - add LIBDIR to the \`$runpath_var' environment variable"
           echo "     during linking"
         fi
         if test -n "$hardcode_libdir_flag_spec"; then
           libdir=LIBDIR
           eval flag=\"$hardcode_libdir_flag_spec\"
   
           $ECHO "   - use the \`$flag' linker flag"
         fi
         if test -n "$admincmds"; then
           $ECHO "   - have your system administrator run these commands:$admincmds"
         fi
         if test -f /etc/ld.so.conf; then
           echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
         fi
         echo
   
         echo "See any operating system documentation about shared libraries for"
         case $host in
           solaris2.[6789]|solaris2.1[0-9])
             echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
             echo "pages."
             ;;
           *)
             echo "more information, such as the ld(1) and ld.so(8) manual pages."
             ;;
         esac
         echo "----------------------------------------------------------------------"
       fi
     exit $EXIT_SUCCESS      exit $EXIT_SUCCESS
   }
   
   test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
   
   
   # func_mode_install arg...
   func_mode_install ()
   {
       $opt_debug
       # There may be an optional sh(1) argument at the beginning of
       # install_prog (especially on Windows NT).
       if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
          # Allow the use of GNU shtool's install command.
          case $nonopt in *shtool*) :;; *) false;; esac; then
         # Aesthetically quote it.
         func_quote_for_eval "$nonopt"
         install_prog="$func_quote_for_eval_result "
         arg=$1
         shift
       else
         install_prog=
         arg=$nonopt
       fi
   
       # The real first argument should be the name of the installation program.
       # Aesthetically quote it.
       func_quote_for_eval "$arg"
       func_append install_prog "$func_quote_for_eval_result"
       install_shared_prog=$install_prog
       case " $install_prog " in
         *[\\\ /]cp\ *) install_cp=: ;;
         *) install_cp=false ;;
       esac
   
       # We need to accept at least all the BSD install flags.
       dest=
       files=
       opts=
       prev=
       install_type=
       isdir=no
       stripme=
       no_mode=:
       for arg
       do
         arg2=
         if test -n "$dest"; then
           func_append files " $dest"
           dest=$arg
           continue
         fi
   
         case $arg in
         -d) isdir=yes ;;
         -f)
           if $install_cp; then :; else
             prev=$arg
           fi
           ;;
         -g | -m | -o)
           prev=$arg
           ;;
         -s)
           stripme=" -s"
           continue
           ;;
         -*)
           ;;
         *)
           # If the previous option needed an argument, then skip it.
           if test -n "$prev"; then
             if test "x$prev" = x-m && test -n "$install_override_mode"; then
               arg2=$install_override_mode
               no_mode=false
             fi
             prev=
           else
             dest=$arg
             continue
           fi
           ;;
         esac
   
         # Aesthetically quote the argument.
         func_quote_for_eval "$arg"
         func_append install_prog " $func_quote_for_eval_result"
         if test -n "$arg2"; then
           func_quote_for_eval "$arg2"
         fi
         func_append install_shared_prog " $func_quote_for_eval_result"
       done
   
       test -z "$install_prog" && \
         func_fatal_help "you must specify an install program"
   
       test -n "$prev" && \
         func_fatal_help "the \`$prev' option requires an argument"
   
       if test -n "$install_override_mode" && $no_mode; then
         if $install_cp; then :; else
           func_quote_for_eval "$install_override_mode"
           func_append install_shared_prog " -m $func_quote_for_eval_result"
         fi
       fi
   
       if test -z "$files"; then
         if test -z "$dest"; then
           func_fatal_help "no file or destination specified"
         else
           func_fatal_help "you must specify a destination"
         fi
       fi
   
       # Strip any trailing slash from the destination.
       func_stripname '' '/' "$dest"
       dest=$func_stripname_result
   
       # Check to see that the destination is a directory.
       test -d "$dest" && isdir=yes
       if test "$isdir" = yes; then
         destdir="$dest"
         destname=
       else
         func_dirname_and_basename "$dest" "" "."
         destdir="$func_dirname_result"
         destname="$func_basename_result"
   
         # Not a directory, so check to see that there is only one file specified.
         set dummy $files; shift
         test "$#" -gt 1 && \
           func_fatal_help "\`$dest' is not a directory"
       fi
       case $destdir in
       [\\/]* | [A-Za-z]:[\\/]*) ;;
       *)
         for file in $files; do
           case $file in
           *.lo) ;;
           *)
             func_fatal_help "\`$destdir' must be an absolute directory name"
             ;;
           esac
         done
         ;;
       esac
   
       # This variable tells wrapper scripts just to set variables rather
       # than running their programs.
       libtool_install_magic="$magic"
   
       staticlibs=
       future_libdirs=
       current_libdirs=
       for file in $files; do
   
         # Do each installation.
         case $file in
         *.$libext)
           # Do the static libraries later.
           func_append staticlibs " $file"
           ;;
   
         *.la)
           func_resolve_sysroot "$file"
           file=$func_resolve_sysroot_result
   
           # Check to see that this really is a libtool archive.
           func_lalib_unsafe_p "$file" \
             || func_fatal_help "\`$file' is not a valid libtool archive"
   
           library_names=
           old_library=
           relink_command=
           func_source "$file"
   
           # Add the libdir to current_libdirs if it is the destination.
           if test "X$destdir" = "X$libdir"; then
             case "$current_libdirs " in
             *" $libdir "*) ;;
             *) func_append current_libdirs " $libdir" ;;
             esac
           else
             # Note the libdir as a future libdir.
             case "$future_libdirs " in
             *" $libdir "*) ;;
             *) func_append future_libdirs " $libdir" ;;
             esac
           fi
   
           func_dirname "$file" "/" ""
           dir="$func_dirname_result"
           func_append dir "$objdir"
   
           if test -n "$relink_command"; then
             # Determine the prefix the user has applied to our future dir.
             inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
   
             # Don't allow the user to place us outside of our expected
             # location b/c this prevents finding dependent libraries that
             # are installed to the same prefix.
             # At present, this check doesn't affect windows .dll's that
             # are installed into $libdir/../bin (currently, that works fine)
             # but it's something to keep an eye on.
             test "$inst_prefix_dir" = "$destdir" && \
               func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
   
             if test -n "$inst_prefix_dir"; then
               # Stick the inst_prefix_dir data into the link command.
               relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
             else
               relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
             fi
   
             func_warning "relinking \`$file'"
             func_show_eval "$relink_command" \
               'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
           fi
   
           # See the names of the shared library.
           set dummy $library_names; shift
           if test -n "$1"; then
             realname="$1"
             shift
   
             srcname="$realname"
             test -n "$relink_command" && srcname="$realname"T
   
             # Install the shared library and build the symlinks.
             func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
                 'exit $?'
             tstripme="$stripme"
             case $host_os in
             cygwin* | mingw* | pw32* | cegcc*)
               case $realname in
               *.dll.a)
                 tstripme=""
                 ;;
               esac
               ;;
             esac
             if test -n "$tstripme" && test -n "$striplib"; then
               func_show_eval "$striplib $destdir/$realname" 'exit $?'
             fi
   
             if test "$#" -gt 0; then
               # Delete the old symlinks, and create new ones.
               # Try `ln -sf' first, because the `ln' binary might depend on
               # the symlink we replace!  Solaris /bin/ln does not understand -f,
               # so we also need to try rm && ln -s.
               for linkname
               do
                 test "$linkname" != "$realname" \
                   && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
               done
             fi
   
             # Do each command in the postinstall commands.
             lib="$destdir/$realname"
             func_execute_cmds "$postinstall_cmds" 'exit $?'
           fi
   
           # Install the pseudo-library for information purposes.
           func_basename "$file"
           name="$func_basename_result"
           instname="$dir/$name"i
           func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
   
           # Maybe install the static library, too.
           test -n "$old_library" && func_append staticlibs " $dir/$old_library"
           ;;
   
         *.lo)
           # Install (i.e. copy) a libtool object.
   
           # Figure out destination file name, if it wasn't already specified.
           if test -n "$destname"; then
             destfile="$destdir/$destname"
           else
             func_basename "$file"
             destfile="$func_basename_result"
             destfile="$destdir/$destfile"
           fi
   
           # Deduce the name of the destination old-style object file.
           case $destfile in
           *.lo)
             func_lo2o "$destfile"
             staticdest=$func_lo2o_result
             ;;
           *.$objext)
             staticdest="$destfile"
             destfile=
             ;;
           *)
             func_fatal_help "cannot copy a libtool object to \`$destfile'"
             ;;
           esac
   
           # Install the libtool object if requested.
           test -n "$destfile" && \
             func_show_eval "$install_prog $file $destfile" 'exit $?'
   
           # Install the old object if enabled.
           if test "$build_old_libs" = yes; then
             # Deduce the name of the old-style object file.
             func_lo2o "$file"
             staticobj=$func_lo2o_result
             func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
           fi
           exit $EXIT_SUCCESS
           ;;
   
         *)
           # Figure out destination file name, if it wasn't already specified.
           if test -n "$destname"; then
             destfile="$destdir/$destname"
           else
             func_basename "$file"
             destfile="$func_basename_result"
             destfile="$destdir/$destfile"
           fi
   
           # If the file is missing, and there is a .exe on the end, strip it
           # because it is most likely a libtool script we actually want to
           # install
           stripped_ext=""
           case $file in
             *.exe)
               if test ! -f "$file"; then
                 func_stripname '' '.exe' "$file"
                 file=$func_stripname_result
                 stripped_ext=".exe"
               fi
               ;;
           esac
   
           # Do a test to see if this is really a libtool program.
           case $host in
           *cygwin* | *mingw*)
               if func_ltwrapper_executable_p "$file"; then
                 func_ltwrapper_scriptname "$file"
                 wrapper=$func_ltwrapper_scriptname_result
               else
                 func_stripname '' '.exe' "$file"
                 wrapper=$func_stripname_result
               fi
               ;;
           *)
               wrapper=$file
               ;;
           esac
           if func_ltwrapper_script_p "$wrapper"; then
             notinst_deplibs=
             relink_command=
   
             func_source "$wrapper"
   
             # Check the variables that should have been set.
             test -z "$generated_by_libtool_version" && \
               func_fatal_error "invalid libtool wrapper script \`$wrapper'"
   
             finalize=yes
             for lib in $notinst_deplibs; do
               # Check to see that each library is installed.
               libdir=
               if test -f "$lib"; then
                 func_source "$lib"
               fi
               libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
               if test -n "$libdir" && test ! -f "$libfile"; then
                 func_warning "\`$lib' has not been installed in \`$libdir'"
                 finalize=no
               fi
             done
   
             relink_command=
             func_source "$wrapper"
   
             outputname=
             if test "$fast_install" = no && test -n "$relink_command"; then
               $opt_dry_run || {
                 if test "$finalize" = yes; then
                   tmpdir=`func_mktempdir`
                   func_basename "$file$stripped_ext"
                   file="$func_basename_result"
                   outputname="$tmpdir/$file"
                   # Replace the output file specification.
                   relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
   
                   $opt_silent || {
                     func_quote_for_expand "$relink_command"
                     eval "func_echo $func_quote_for_expand_result"
                   }
                   if eval "$relink_command"; then :
                     else
                     func_error "error: relink \`$file' with the above command before installing it"
                     $opt_dry_run || ${RM}r "$tmpdir"
                     continue
                   fi
                   file="$outputname"
                 else
                   func_warning "cannot relink \`$file'"
                 fi
               }
             else
               # Install the binary that we compiled earlier.
               file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
             fi
           fi
   
           # remove .exe since cygwin /usr/bin/install will append another
           # one anyway
           case $install_prog,$host in
           */usr/bin/install*,*cygwin*)
             case $file:$destfile in
             *.exe:*.exe)
               # this is ok
               ;;
             *.exe:*)
               destfile=$destfile.exe
               ;;
             *:*.exe)
               func_stripname '' '.exe' "$destfile"
               destfile=$func_stripname_result
               ;;
             esac
             ;;
           esac
           func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
           $opt_dry_run || if test -n "$outputname"; then
             ${RM}r "$tmpdir"
           fi
           ;;
         esac
       done
   
       for file in $staticlibs; do
         func_basename "$file"
         name="$func_basename_result"
   
         # Set up the ranlib parameters.
         oldlib="$destdir/$name"
   
         func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
   
         if test -n "$stripme" && test -n "$old_striplib"; then
           func_show_eval "$old_striplib $oldlib" 'exit $?'
         fi
   
         # Do each command in the postinstall commands.
         func_execute_cmds "$old_postinstall_cmds" 'exit $?'
       done
   
       test -n "$future_libdirs" && \
         func_warning "remember to run \`$progname --finish$future_libdirs'"
   
       if test -n "$current_libdirs"; then
         # Maybe just do a dry run.
         $opt_dry_run && current_libdirs=" -n$current_libdirs"
         exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
       else
         exit $EXIT_SUCCESS
       fi
   }
   
   test "$opt_mode" = install && func_mode_install ${1+"$@"}
   
   
   # func_generate_dlsyms outputname originator pic_p
   # Extract symbols from dlprefiles and create ${outputname}S.o with
   # a dlpreopen symbol table.
   func_generate_dlsyms ()
   {
       $opt_debug
       my_outputname="$1"
       my_originator="$2"
       my_pic_p="${3-no}"
       my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
       my_dlsyms=
   
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
         if test -n "$NM" && test -n "$global_symbol_pipe"; then
           my_dlsyms="${my_outputname}S.c"
         else
           func_error "not configured to extract global symbols from dlpreopened files"
         fi
       fi
   
       if test -n "$my_dlsyms"; then
         case $my_dlsyms in
         "") ;;
         *.c)
           # Discover the nlist of each of the dlfiles.
           nlist="$output_objdir/${my_outputname}.nm"
   
           func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
   
           # Parse the name list into a source file.
           func_verbose "creating $output_objdir/$my_dlsyms"
   
           $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
   /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
   /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
   
   #ifdef __cplusplus
   extern \"C\" {
   #endif
   
   #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
   #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
   #endif
   
   /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
   #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
   /* DATA imports from DLLs on WIN32 con't be const, because runtime
      relocations are performed -- see ld's documentation on pseudo-relocs.  */
   # define LT_DLSYM_CONST
   #elif defined(__osf__)
   /* This system does not cope well with relocations in const data.  */
   # define LT_DLSYM_CONST
   #else
   # define LT_DLSYM_CONST const
   #endif
   
   /* External symbol declarations for the compiler. */\
   "
   
           if test "$dlself" = yes; then
             func_verbose "generating symbol list for \`$output'"
   
             $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
   
             # Add our own program objects to the symbol list.
             progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
             for progfile in $progfiles; do
               func_to_tool_file "$progfile" func_convert_file_msys_to_w32
               func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
               $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
             done
   
             if test -n "$exclude_expsyms"; then
               $opt_dry_run || {
                 eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
                 eval '$MV "$nlist"T "$nlist"'
               }
             fi
   
             if test -n "$export_symbols_regex"; then
               $opt_dry_run || {
                 eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
                 eval '$MV "$nlist"T "$nlist"'
               }
             fi
   
             # Prepare the list of exported symbols
             if test -z "$export_symbols"; then
               export_symbols="$output_objdir/$outputname.exp"
               $opt_dry_run || {
                 $RM $export_symbols
                 eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
                 case $host in
                 *cygwin* | *mingw* | *cegcc* )
                   eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                   eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
                   ;;
                 esac
               }
             else
               $opt_dry_run || {
                 eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
                 eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
                 eval '$MV "$nlist"T "$nlist"'
                 case $host in
                   *cygwin* | *mingw* | *cegcc* )
                     eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                     eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
                     ;;
                 esac
               }
             fi
           fi
   
           for dlprefile in $dlprefiles; do
             func_verbose "extracting global C symbols from \`$dlprefile'"
             func_basename "$dlprefile"
             name="$func_basename_result"
             case $host in
               *cygwin* | *mingw* | *cegcc* )
                 # if an import library, we need to obtain dlname
                 if func_win32_import_lib_p "$dlprefile"; then
                   func_tr_sh "$dlprefile"
                   eval "curr_lafile=\$libfile_$func_tr_sh_result"
                   dlprefile_dlbasename=""
                   if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
                     # Use subshell, to avoid clobbering current variable values
                     dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
                     if test -n "$dlprefile_dlname" ; then
                       func_basename "$dlprefile_dlname"
                       dlprefile_dlbasename="$func_basename_result"
                     else
                       # no lafile. user explicitly requested -dlpreopen <import library>.
                       $sharedlib_from_linklib_cmd "$dlprefile"
                       dlprefile_dlbasename=$sharedlib_from_linklib_result
                     fi
                   fi
                   $opt_dry_run || {
                     if test -n "$dlprefile_dlbasename" ; then
                       eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
                     else
                       func_warning "Could not compute DLL name from $name"
                       eval '$ECHO ": $name " >> "$nlist"'
                     fi
                     func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
                     eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
                       $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
                   }
                 else # not an import lib
                   $opt_dry_run || {
                     eval '$ECHO ": $name " >> "$nlist"'
                     func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
                     eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
                   }
                 fi
               ;;
               *)
                 $opt_dry_run || {
                   eval '$ECHO ": $name " >> "$nlist"'
                   func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
                   eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
                 }
               ;;
             esac
           done
   
           $opt_dry_run || {
             # Make sure we have at least an empty file.
             test -f "$nlist" || : > "$nlist"
   
             if test -n "$exclude_expsyms"; then
               $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
               $MV "$nlist"T "$nlist"
             fi
   
             # Try sorting and uniquifying the output.
             if $GREP -v "^: " < "$nlist" |
                 if sort -k 3 </dev/null >/dev/null 2>&1; then
                   sort -k 3
                 else
                   sort +2
                 fi |
                 uniq > "$nlist"S; then
               :
             else
               $GREP -v "^: " < "$nlist" > "$nlist"S
             fi
   
             if test -f "$nlist"S; then
               eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
             else
               echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
             fi
   
             echo >> "$output_objdir/$my_dlsyms" "\
   
   /* The mapping between symbol names and symbols.  */
   typedef struct {
     const char *name;
     void *address;
   } lt_dlsymlist;
   extern LT_DLSYM_CONST lt_dlsymlist
   lt_${my_prefix}_LTX_preloaded_symbols[];
   LT_DLSYM_CONST lt_dlsymlist
   lt_${my_prefix}_LTX_preloaded_symbols[] =
   {\
     { \"$my_originator\", (void *) 0 },"
   
             case $need_lib_prefix in
             no)
               eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
               ;;
             *)
               eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
               ;;
             esac
             echo >> "$output_objdir/$my_dlsyms" "\
     {0, (void *) 0}
   };
   
   /* This works around a problem in FreeBSD linker */
   #ifdef FREEBSD_WORKAROUND
   static const void *lt_preloaded_setup() {
     return lt_${my_prefix}_LTX_preloaded_symbols;
   }
   #endif
   
   #ifdef __cplusplus
   }
   #endif\
   "
           } # !$opt_dry_run
   
           pic_flag_for_symtable=
           case "$compile_command " in
           *" -static "*) ;;
           *)
             case $host in
             # compiling the symbol table file with pic_flag works around
             # a FreeBSD bug that causes programs to crash when -lm is
             # linked before any other PIC object.  But we must not use
             # pic_flag when linking with -static.  The problem exists in
             # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
             *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
               pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
             *-*-hpux*)
               pic_flag_for_symtable=" $pic_flag"  ;;
             *)
               if test "X$my_pic_p" != Xno; then
                 pic_flag_for_symtable=" $pic_flag"
               fi
               ;;
             esac
             ;;
           esac
           symtab_cflags=
           for arg in $LTCFLAGS; do
             case $arg in
             -pie | -fpie | -fPIE) ;;
             *) func_append symtab_cflags " $arg" ;;
             esac
           done
   
           # Now compile the dynamic symbol file.
           func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
   
           # Clean up the generated files.
           func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
   
           # Transform the symbol file into the correct name.
           symfileobj="$output_objdir/${my_outputname}S.$objext"
           case $host in
           *cygwin* | *mingw* | *cegcc* )
             if test -f "$output_objdir/$my_outputname.def"; then
               compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
               finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
             else
               compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
               finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
             fi
             ;;
           *)
             compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
             finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
             ;;
           esac
           ;;
         *)
           func_fatal_error "unknown suffix for \`$my_dlsyms'"
           ;;
         esac
       else
         # We keep going just in case the user didn't refer to
         # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
         # really was required.
   
         # Nullify the symbol file.
         compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
         finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
       fi
   }
   
   # func_win32_libid arg
   # return the library type of file 'arg'
   #
   # Need a lot of goo to handle *both* DLLs and import libs
   # Has to be a shell function in order to 'eat' the argument
   # that is supplied when $file_magic_command is called.
   # Despite the name, also deal with 64 bit binaries.
   func_win32_libid ()
   {
     $opt_debug
     win32_libid_type="unknown"
     win32_fileres=`file -L $1 2>/dev/null`
     case $win32_fileres in
     *ar\ archive\ import\ library*) # definitely import
       win32_libid_type="x86 archive import"
     ;;      ;;
     *ar\ archive*) # could be an import, or static
       # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
       if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
          $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
         func_to_tool_file "$1" func_convert_file_msys_to_w32
         win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
           $SED -n -e '
               1,100{
                   / I /{
                       s,.*,import,
                       p
                       q
                   }
               }'`
         case $win32_nmres in
         import*)  win32_libid_type="x86 archive import";;
         *)        win32_libid_type="x86 archive static";;
         esac
       fi
       ;;
     *DLL*)
       win32_libid_type="x86 DLL"
       ;;
     *executable*) # but shell scripts are "executable" too...
       case $win32_fileres in
       *MS\ Windows\ PE\ Intel*)
         win32_libid_type="x86 DLL"
         ;;
       esac
       ;;
     esac
     $ECHO "$win32_libid_type"
   }
   
  # libtool link mode# func_cygming_dll_for_implib ARG
  link | relink)#
    modename="$modename: link"# Platform-specific function to extract the
 # name of the DLL associated with the specified
 # import library ARG.
 # Invoked by eval'ing the libtool variable
 #    $sharedlib_from_linklib_cmd
 # Result is available in the variable
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib ()
 {
   $opt_debug
   sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
 }
 
 # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
 #
 # The is the core of a fallback implementation of a
 # platform-specific function to extract the name of the
 # DLL associated with the specified import library LIBNAME.
 #
 # SECTION_NAME is either .idata$6 or .idata$7, depending
 # on the platform and compiler that created the implib.
 #
 # Echos the name of the DLL associated with the
 # specified import library.
 func_cygming_dll_for_implib_fallback_core ()
 {
   $opt_debug
   match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
   $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
     $SED '/^Contents of section '"$match_literal"':/{
       # Place marker at beginning of archive member dllname section
       s/.*/====MARK====/
       p
       d
     }
     # These lines can sometimes be longer than 43 characters, but
     # are always uninteresting
     /:[  ]*file format pe[i]\{,1\}-/d
     /^In archive [^:]*:/d
     # Ensure marker is printed
     /^====MARK====/p
     # Remove all lines with less than 43 characters
     /^.\{43\}/!d
     # From remaining lines, remove first 43 characters
     s/^.\{43\}//' |
     $SED -n '
       # Join marker and all lines until next marker into a single line
       /^====MARK====/ b para
       H
       $ b para
       b
       :para
       x
       s/\n//g
       # Remove the marker
       s/^====MARK====//
       # Remove trailing dots and whitespace
       s/[\. \t]*$//
       # Print
       /./p' |
     # we now have a list, one entry per line, of the stringified
     # contents of the appropriate section of all members of the
     # archive which possess that section. Heuristic: eliminate
     # all those which have a first or second character that is
     # a '.' (that is, objdump's representation of an unprintable
     # character.) This should work for all archives with less than
     # 0x302f exports -- but will fail for DLLs whose name actually
     # begins with a literal '.' or a single character followed by
     # a '.'.
     #
     # Of those that remain, print the first one.
     $SED -e '/^\./d;/^.\./d;q'
 }
 
 # func_cygming_gnu_implib_p ARG
 # This predicate returns with zero status (TRUE) if
 # ARG is a GNU/binutils-style import library. Returns
 # with nonzero status (FALSE) otherwise.
 func_cygming_gnu_implib_p ()
 {
   $opt_debug
   func_to_tool_file "$1" func_convert_file_msys_to_w32
   func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
   test -n "$func_cygming_gnu_implib_tmp"
 }
 
 # func_cygming_ms_implib_p ARG
 # This predicate returns with zero status (TRUE) if
 # ARG is an MS-style import library. Returns
 # with nonzero status (FALSE) otherwise.
 func_cygming_ms_implib_p ()
 {
   $opt_debug
   func_to_tool_file "$1" func_convert_file_msys_to_w32
   func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
   test -n "$func_cygming_ms_implib_tmp"
 }
 
 # func_cygming_dll_for_implib_fallback ARG
 # Platform-specific function to extract the
 # name of the DLL associated with the specified
 # import library ARG.
 #
 # This fallback implementation is for use when $DLLTOOL
 # does not support the --identify-strict option.
 # Invoked by eval'ing the libtool variable
 #    $sharedlib_from_linklib_cmd
 # Result is available in the variable
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib_fallback ()
 {
   $opt_debug
   if func_cygming_gnu_implib_p "$1" ; then
     # binutils import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
   elif func_cygming_ms_implib_p "$1" ; then
     # ms-generated import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
   else
     # unknown
     sharedlib_from_linklib_result=""
   fi
 }
 
 
 # func_extract_an_archive dir oldlib
 func_extract_an_archive ()
 {
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"
     if test "$lock_old_archive_extraction" = yes; then
       lockfile=$f_ex_an_ar_oldlib.lock
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
         func_echo "Waiting for $lockfile to be removed"
         sleep 2
       done
     fi
     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
                    'stat=$?; rm -f "$lockfile"; exit $stat'
     if test "$lock_old_archive_extraction" = yes; then
       $opt_dry_run || rm -f "$lockfile"
     fi
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
       func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
     fi
 }
 
 
 # func_extract_archives gentop oldlib ...
 func_extract_archives ()
 {
     $opt_debug
     my_gentop="$1"; shift
     my_oldlibs=${1+"$@"}
     my_oldobjs=""
     my_xlib=""
     my_xabs=""
     my_xdir=""
 
     for my_xlib in $my_oldlibs; do
       # Extract the objects.
       case $my_xlib in
         [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
         *) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       func_basename "$my_xlib"
       my_xlib="$func_basename_result"
       my_xlib_u=$my_xlib
       while :; do
         case " $extracted_archives " in
         *" $my_xlib_u "*)
           func_arith $extracted_serial + 1
           extracted_serial=$func_arith_result
           my_xlib_u=lt$extracted_serial-$my_xlib ;;
         *) break ;;
         esac
       done
       extracted_archives="$extracted_archives $my_xlib_u"
       my_xdir="$my_gentop/$my_xlib_u"
 
       func_mkdir_p "$my_xdir"
 
       case $host in
       *-darwin*)
         func_verbose "Extracting $my_xabs"
         # Do not bother doing anything if just a dry run
         $opt_dry_run || {
           darwin_orig_dir=`pwd`
           cd $my_xdir || exit $?
           darwin_archive=$my_xabs
           darwin_curdir=`pwd`
           darwin_base_archive=`basename "$darwin_archive"`
           darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
           if test -n "$darwin_arches"; then
             darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
             darwin_arch=
             func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
             for darwin_arch in  $darwin_arches ; do
               func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
               $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
               cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
               func_extract_an_archive "`pwd`" "${darwin_base_archive}"
               cd "$darwin_curdir"
               $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
             done # $darwin_arches
             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
             darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
             darwin_file=
             darwin_files=
             for darwin_file in $darwin_filelist; do
               darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
               $LIPO -create -output "$darwin_file" $darwin_files
             done # $darwin_filelist
             $RM -rf unfat-$$
             cd "$darwin_orig_dir"
           else
             cd $darwin_orig_dir
             func_extract_an_archive "$my_xdir" "$my_xabs"
           fi # $darwin_arches
         } # !$opt_dry_run
         ;;
       *)
         func_extract_an_archive "$my_xdir" "$my_xabs"
         ;;
       esac
       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 
 # func_emit_wrapper [arg=no]
 #
 # Emit a libtool wrapper script on stdout.
 # Don't directly open a file because we may want to
 # incorporate the script contents within a cygwin/mingw
 # wrapper executable.  Must ONLY be called from within
 # func_mode_link because it depends on a number of variables
 # set therein.
 #
 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
 # variable will take.  If 'yes', then the emitted script
 # will assume that the directory in which it is stored is
 # the $objdir directory.  This is a cygwin/mingw-specific
 # behavior.
 func_emit_wrapper ()
 {
         func_emit_wrapper_arg1=${1-no}
 
         $ECHO "\
 #! $SHELL
 
 # $output - temporary wrapper script for $objdir/$outputname
 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # The $output program cannot be directly executed until all the libtool
 # libraries that it depends on are installed.
 #
 # This wrapper script should never be moved out of the build directory.
 # If it is, it will not operate correctly.
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
 if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '\${1+\"\$@\"}'='\"\$@\"'
   setopt NO_GLOB_SUBST
 else
   case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
 fi
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 relink_command=\"$relink_command\"
 
 # This environment variable determines our operation mode.
 if test \"\$libtool_install_magic\" = \"$magic\"; then
   # install mode needs the following variables:
   generated_by_libtool_version='$macro_version'
   notinst_deplibs='$notinst_deplibs'
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
     file=\"\$0\""
 
     qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
     $ECHO "\
 
 # A function that is used when there is no print builtin or printf.
 func_fallback_echo ()
 {
   eval 'cat <<_LTECHO_EOF
 \$1
 _LTECHO_EOF'
 }
     ECHO=\"$qECHO\"
   fi
 
 # Very basic option parsing. These options are (a) specific to
 # the libtool wrapper, (b) are identical between the wrapper
 # /script/ and the wrapper /executable/ which is used only on
 # windows platforms, and (c) all begin with the string "--lt-"
 # (application programs are unlikely to have options which match
 # this pattern).
 #
 # There are only two supported options: --lt-debug and
 # --lt-dump-script. There is, deliberately, no --lt-help.
 #
 # The first argument to this parsing function should be the
 # script's $0 value, followed by "$@".
 lt_option_debug=
 func_parse_lt_options ()
 {
   lt_script_arg0=\$0
   shift
   for lt_opt
   do
     case \"\$lt_opt\" in
     --lt-debug) lt_option_debug=1 ;;
     --lt-dump-script)
         lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
         test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
         lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
         cat \"\$lt_dump_D/\$lt_dump_F\"
         exit 0
       ;;
     --lt-*)
         \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
         exit 1
       ;;
     esac
   done
 
   # Print the debug banner immediately:
   if test -n \"\$lt_option_debug\"; then
     echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
   fi
 }
 
 # Used when --lt-debug. Prints its arguments to stdout
 # (redirection is the responsibility of the caller)
 func_lt_dump_args ()
 {
   lt_dump_args_N=1;
   for lt_arg
   do
     \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
     lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
   done
 }
 
 # Core function for launching the target application
 func_exec_program_core ()
 {
 "
   case $host in
   # Backslashes separate directories on plain windows
   *-*-mingw | *-*-os2* | *-cegcc*)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
         \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 "
     ;;
 
   *)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
         \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir/\$program\" \${1+\"\$@\"}
 "
     ;;
   esac
   $ECHO "\
       \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
       exit 1
 }
 
 # A function to encapsulate launching the target application
 # Strips options in the --lt-* namespace from \$@ and
 # launches target application with the remaining arguments.
 func_exec_program ()
 {
   for lt_wr_arg
   do
     case \$lt_wr_arg in
     --lt-*) ;;
     *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
     esac
     shift
   done
   func_exec_program_core \${1+\"\$@\"}
 }
 
   # Parse options
   func_parse_lt_options \"\$0\" \${1+\"\$@\"}
 
   # Find the directory that this script lives in.
   thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
   file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
     destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
       case \"\$destdir\" in
       [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
       *) thisdir=\"\$thisdir/\$destdir\" ;;
       esac
     fi
 
     file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
     file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
   done
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
   WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
       thisdir=\`pwd\`
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in
     *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
     $objdir )   thisdir=. ;;
     esac
   fi
 
   # Try to get the absolute directory name.
   absdir=\`cd \"\$thisdir\" && pwd\`
   test -n \"\$absdir\" && thisdir=\"\$absdir\"
 "
 
         if test "$fast_install" = yes; then
           $ECHO "\
   program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
 
   if test ! -f \"\$progdir/\$program\" ||
      { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
     file=\"\$\$-\$program\"
 
     if test ! -d \"\$progdir\"; then
       $MKDIR \"\$progdir\"
     else
       $RM \"\$progdir/\$file\"
     fi"
 
           $ECHO "\
 
     # relink executable if necessary
     if test -n \"\$relink_command\"; then
       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
       else
         $ECHO \"\$relink_command_output\" >&2
         $RM \"\$progdir/\$file\"
         exit 1
       fi
     fi
 
     $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
     { $RM \"\$progdir/\$program\";
       $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
     $RM \"\$progdir/\$file\"
   fi"
         else
           $ECHO "\
   program='$outputname'
   progdir=\"\$thisdir/$objdir\"
 "
         fi
 
         $ECHO "\
 
   if test -f \"\$progdir/\$program\"; then"
 
         # fixup the dll searchpath if we need to.
         #
         # Fix the DLL searchpath if we need to.  Do this before prepending
         # to shlibpath, because on Windows, both are PATH and uninstalled
         # libraries must come first.
         if test -n "$dllsearchpath"; then
           $ECHO "\
     # Add the dll search path components to the executable PATH
     PATH=$dllsearchpath:\$PATH
 "
         fi
 
         # Export our shlibpath_var if we have one.
         if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
           $ECHO "\
     # Add our own library path to $shlibpath_var
     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed
     $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
 
     export $shlibpath_var
 "
         fi
 
         $ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
       func_exec_program \${1+\"\$@\"}
     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
     \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
   fi
 fi\
 "
 }
 
 
 # func_emit_cwrapperexe_src
 # emit the source code for a wrapper executable on stdout
 # Must ONLY be called from within func_mode_link because
 # it depends on a number of variable set therein.
 func_emit_cwrapperexe_src ()
 {
         cat <<EOF
 
 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
    Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
    The $output program cannot be directly executed until all the libtool
    libraries that it depends on are installed.
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
 */
 EOF
             cat <<"EOF"
 #ifdef _MSC_VER
 # define _CRT_SECURE_NO_DEPRECATE 1
 #endif
 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
 # endif
 #endif
 #include <malloc.h>
 #include <stdarg.h>
 #include <assert.h>
 #include <string.h>
 #include <ctype.h>
 #include <errno.h>
 #include <fcntl.h>
 #include <sys/stat.h>
 
 /* declarations of non-ANSI functions */
 #if defined(__MINGW32__)
 # ifdef __STRICT_ANSI__
 int _putenv (const char *);
 # endif
 #elif defined(__CYGWIN__)
 # ifdef __STRICT_ANSI__
 char *realpath (const char *, char *);
 int putenv (char *);
 int setenv (const char *, const char *, int);
 # endif
 /* #elif defined (other platforms) ... */
 #endif
 
 /* portability defines, excluding path handling macros */
 #if defined(_MSC_VER)
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
 # define S_IXUSR _S_IEXEC
 # ifndef _INTPTR_T_DEFINED
 #  define _INTPTR_T_DEFINED
 #  define intptr_t int
 # endif
 #elif defined(__MINGW32__)
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
 #elif defined(__CYGWIN__)
 # define HAVE_SETENV
 # define FOPEN_WB "wb"
 /* #elif defined (other platforms) ... */
 #endif
 
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
 # define LT_PATHMAX MAXPATHLEN
 #else
 # define LT_PATHMAX 1024
 #endif
 
 #ifndef S_IXOTH
 # define S_IXOTH 0
 #endif
 #ifndef S_IXGRP
 # define S_IXGRP 0
 #endif
 
 /* path handling portability macros */
 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
 #endif
 
 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
   defined (__OS2__)
 # define HAVE_DOS_BASED_FILE_SYSTEM
 # define FOPEN_WB "wb"
 # ifndef DIR_SEPARATOR_2
 #  define DIR_SEPARATOR_2 '\\'
 # endif
 # ifndef PATH_SEPARATOR_2
 #  define PATH_SEPARATOR_2 ';'
 # endif
 #endif
 
 #ifndef DIR_SEPARATOR_2
 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
 #else /* DIR_SEPARATOR_2 */
 # define IS_DIR_SEPARATOR(ch) \
         (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
 #endif /* DIR_SEPARATOR_2 */
 
 #ifndef PATH_SEPARATOR_2
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
 #else /* PATH_SEPARATOR_2 */
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
 #ifndef _O_BINARY
 # define _O_BINARY 0
 #endif
 
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
 #if defined(LT_DEBUGWRAPPER)
 static int lt_debug = 1;
 #else
 static int lt_debug = 0;
 #endif
 
 const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
 const char *base_name (const char *name);
 char *find_executable (const char *wrapper);
 char *chase_symlinks (const char *pathspec);
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
 void lt_debugprintf (const char *file, int line, const char *fmt, ...);
 void lt_fatal (const char *file, int line, const char *message, ...);
 static const char *nonnull (const char *s);
 static const char *nonempty (const char *s);
 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);
 char **prepare_spawn (char **argv);
 void lt_dump_script (FILE *f);
 EOF
 
             cat <<EOF
 volatile const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
             if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
               func_to_host_path "$temp_rpath"
               cat <<EOF
 const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
 EOF
             else
               cat <<"EOF"
 const char * LIB_PATH_VALUE   = "";
 EOF
             fi
 
             if test -n "$dllsearchpath"; then
               func_to_host_path "$dllsearchpath:"
               cat <<EOF
 const char * EXE_PATH_VARNAME = "PATH";
 const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
 EOF
             else
               cat <<"EOF"
 const char * EXE_PATH_VARNAME = "";
 const char * EXE_PATH_VALUE   = "";
 EOF
             fi
 
             if test "$fast_install" = yes; then
               cat <<EOF
 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
 EOF
             else
               cat <<EOF
 const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
 EOF
             fi
 
 
             cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
 
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
 static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
 
 int
 main (int argc, char *argv[])
 {
   char **newargz;
   int  newargc;
   char *tmp_pathspec;
   char *actual_cwrapper_path;
   char *actual_cwrapper_name;
   char *target_name;
   char *lt_argv_zero;
   intptr_t rval = 127;
 
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
   newargz = XMALLOC (char *, argc + 1);
 
   /* very simple arg parsing; don't want to rely on getopt
    * also, copy all non cwrapper options to newargz, except
    * argz[0], which is handled differently
    */
   newargc=0;
   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
         {
 EOF
             case "$host" in
               *mingw* | *cygwin* )
                 # make stdout use "unix" line endings
                 echo "          setmode(1,_O_BINARY);"
                 ;;
               esac
 
             cat <<"EOF"
           lt_dump_script (stdout);
           return 0;
         }
       if (strcmp (argv[i], debug_opt) == 0)
         {
           lt_debug = 1;
           continue;
         }
       if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
         {
           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
              namespace, but it is not one of the ones we know about and
              have already dealt with, above (inluding dump-script), then
              report an error. Otherwise, targets might begin to believe
              they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
              namespace. The first time any user complains about this, we'll
              need to make LTWRAPPER_OPTION_PREFIX a configure-time option
              or a configure.ac-settable value.
            */
           lt_fatal (__FILE__, __LINE__,
                     "unrecognized %s option: '%s'",
                     ltwrapper_option_prefix, argv[i]);
         }
       /* otherwise ... */
       newargz[++newargc] = xstrdup (argv[i]);
     }
   newargz[++newargc] = NULL;
 
 EOF
             cat <<EOF
   /* The GNU banner must be the first non-error debug message */
   lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
 EOF
             cat <<"EOF"
   lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
   lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
 
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
     lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
   lt_debugprintf (__FILE__, __LINE__,
                   "(main) found exe (before symlink chase) at: %s\n",
                   tmp_pathspec);
 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
   lt_debugprintf (__FILE__, __LINE__,
                   "(main) found exe (after symlink chase) at: %s\n",
                   actual_cwrapper_path);
   XFREE (tmp_pathspec);
 
   actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
   strendzap (actual_cwrapper_name, ".exe");
   tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
   XFREE (actual_cwrapper_name);
   actual_cwrapper_name = tmp_pathspec;
   tmp_pathspec = 0;
 
   /* target_name transforms -- use actual target program name; might have lt- prefix */
   target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
   strendzap (target_name, ".exe");
   tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
   XFREE (target_name);
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 
   lt_debugprintf (__FILE__, __LINE__,
                   "(main) libtool target name: %s\n",
                   target_name);
 EOF
 
             cat <<EOF
   newargz[0] =
     XMALLOC (char, (strlen (actual_cwrapper_path) +
                     strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
   strcpy (newargz[0], actual_cwrapper_path);
   strcat (newargz[0], "$objdir");
   strcat (newargz[0], "/");
 EOF
 
             cat <<"EOF"
   /* stop here, and copy so we don't have to do this twice */
   tmp_pathspec = xstrdup (newargz[0]);
 
   /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
   strcat (newargz[0], actual_cwrapper_name);
 
   /* DO want the lt- prefix here if it exists, so use target_name */
   lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
   XFREE (tmp_pathspec);
   tmp_pathspec = NULL;
 EOF
 
             case $host_os in
               mingw*)
             cat <<"EOF"
   {
     char* p;
     while ((p = strchr (newargz[0], '\\')) != NULL)
       {
         *p = '/';
       }
     while ((p = strchr (lt_argv_zero, '\\')) != NULL)
       {
         *p = '/';
       }
   }
 EOF
             ;;
             esac
 
             cat <<"EOF"
   XFREE (target_name);
   XFREE (actual_cwrapper_path);
   XFREE (actual_cwrapper_name);
 
   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
   /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
      be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
      because on Windows, both *_VARNAMEs are PATH but uninstalled
      libraries must come first. */
   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
 
   lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
                   nonnull (lt_argv_zero));
   for (i = 0; i < newargc; i++)
     {
       lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
                       i, nonnull (newargz[i]));
     }
 
 EOF
 
             case $host_os in
               mingw*)
                 cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
   newargz = prepare_spawn (newargz);
   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
       lt_debugprintf (__FILE__, __LINE__,
                       "(main) failed to launch target \"%s\": %s\n",
                       lt_argv_zero, nonnull (strerror (errno)));
       return 127;
     }
   return rval;
 EOF
                 ;;
               *)
                 cat <<"EOF"
   execv (lt_argv_zero, newargz);
   return rval; /* =127, but avoids unused variable warning */
 EOF
                 ;;
             esac
 
             cat <<"EOF"
 }
 
 void *
 xmalloc (size_t num)
 {
   void *p = (void *) malloc (num);
   if (!p)
     lt_fatal (__FILE__, __LINE__, "memory exhausted");
 
   return p;
 }
 
 char *
 xstrdup (const char *string)
 {
   return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
                           string) : NULL;
 }
 
 const char *
 base_name (const char *name)
 {
   const char *base;
 
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   /* Skip over the disk name in MSDOS pathnames. */
   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
     name += 2;
 #endif
 
   for (base = name; *name; name++)
     if (IS_DIR_SEPARATOR (*name))
       base = name + 1;
   return base;
 }
 
 int
 check_executable (const char *path)
 {
   struct stat st;
 
   lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
                   nonempty (path));
   if ((!path) || (!*path))
     return 0;
 
   if ((stat (path, &st) >= 0)
       && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
     return 1;
   else
     return 0;
 }
 
 int
 make_executable (const char *path)
 {
   int rval = 0;
   struct stat st;
 
   lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
                   nonempty (path));
   if ((!path) || (!*path))
     return 0;
 
   if (stat (path, &st) >= 0)
     {
       rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
     }
   return rval;
 }
 
 /* Searches for the full path of the wrapper.  Returns
    newly allocated full path name if found, NULL otherwise
    Does not chase symlinks, even on platforms that support them.
 */
 char *
 find_executable (const char *wrapper)
 {
   int has_slash = 0;
   const char *p;
   const char *p_next;
   /* static buffer for getcwd */
   char tmp[LT_PATHMAX + 1];
   int tmp_len;
   char *concat_name;
 
   lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
                   nonempty (wrapper));
 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
 
   /* Absolute path? */
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
     {
       concat_name = xstrdup (wrapper);
       if (check_executable (concat_name))
         return concat_name;
       XFREE (concat_name);
     }
   else
     {
 #endif
       if (IS_DIR_SEPARATOR (wrapper[0]))
         {
           concat_name = xstrdup (wrapper);
           if (check_executable (concat_name))
             return concat_name;
           XFREE (concat_name);
         }
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
     }
 #endif
 
   for (p = wrapper; *p; p++)
     if (*p == '/')
       {
         has_slash = 1;
         break;
       }
   if (!has_slash)
     {
       /* no slashes; search PATH */
       const char *path = getenv ("PATH");
       if (path != NULL)
         {
           for (p = path; *p; p = p_next)
             {
               const char *q;
               size_t p_len;
               for (q = p; *q; q++)
                 if (IS_PATH_SEPARATOR (*q))
                   break;
               p_len = q - p;
               p_next = (*q == '\0' ? q : q + 1);
               if (p_len == 0)
                 {
                   /* empty path: current directory */
                   if (getcwd (tmp, LT_PATHMAX) == NULL)
                     lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
                               nonnull (strerror (errno)));
                   tmp_len = strlen (tmp);
                   concat_name =
                     XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
                   memcpy (concat_name, tmp, tmp_len);
                   concat_name[tmp_len] = '/';
                   strcpy (concat_name + tmp_len + 1, wrapper);
                 }
               else
                 {
                   concat_name =
                     XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
                   memcpy (concat_name, p, p_len);
                   concat_name[p_len] = '/';
                   strcpy (concat_name + p_len + 1, wrapper);
                 }
               if (check_executable (concat_name))
                 return concat_name;
               XFREE (concat_name);
             }
         }
       /* not found in PATH; assume curdir */
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
     lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
               nonnull (strerror (errno)));
   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
   concat_name[tmp_len] = '/';
   strcpy (concat_name + tmp_len + 1, wrapper);
 
   if (check_executable (concat_name))
     return concat_name;
   XFREE (concat_name);
   return NULL;
 }
 
 char *
 chase_symlinks (const char *pathspec)
 {
 #ifndef S_ISLNK
   return xstrdup (pathspec);
 #else
   char buf[LT_PATHMAX];
   struct stat s;
   char *tmp_pathspec = xstrdup (pathspec);
   char *p;
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {
       lt_debugprintf (__FILE__, __LINE__,
                       "checking path component for symlinks: %s\n",
                       tmp_pathspec);
       if (lstat (tmp_pathspec, &s) == 0)
         {
           if (S_ISLNK (s.st_mode) != 0)
             {
               has_symlinks = 1;
               break;
             }
 
           /* search backwards for last DIR_SEPARATOR */
           p = tmp_pathspec + strlen (tmp_pathspec) - 1;
           while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
             p--;
           if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
             {
               /* no more DIR_SEPARATORS left */
               break;
             }
           *p = '\0';
         }
       else
         {
           lt_fatal (__FILE__, __LINE__,
                     "error accessing file \"%s\": %s",
                     tmp_pathspec, nonnull (strerror (errno)));
         }
     }
   XFREE (tmp_pathspec);
 
   if (!has_symlinks)
     {
       return xstrdup (pathspec);
     }
 
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {
       lt_fatal (__FILE__, __LINE__,
                 "could not follow symlinks for %s", pathspec);
     }
   return xstrdup (tmp_pathspec);
 #endif
 }
 
 char *
 strendzap (char *str, const char *pat)
 {
   size_t len, patlen;
 
   assert (str != NULL);
   assert (pat != NULL);
 
   len = strlen (str);
   patlen = strlen (pat);
 
   if (patlen <= len)
     {
       str += len - patlen;
       if (strcmp (str, pat) == 0)
         *str = '\0';
     }
   return str;
 }
 
 void
 lt_debugprintf (const char *file, int line, const char *fmt, ...)
 {
   va_list args;
   if (lt_debug)
     {
       (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
       va_start (args, fmt);
       (void) vfprintf (stderr, fmt, args);
       va_end (args);
     }
 }
 
 static void
 lt_error_core (int exit_status, const char *file,
                int line, const char *mode,
                const char *message, va_list ap)
 {
   fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
   if (exit_status >= 0)
     exit (exit_status);
 }
 
 void
 lt_fatal (const char *file, int line, const char *message, ...)
 {
   va_list ap;
   va_start (ap, message);
   lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
   va_end (ap);
 }
 
 static const char *
 nonnull (const char *s)
 {
   return s ? s : "(null)";
 }
 
 static const char *
 nonempty (const char *s)
 {
   return (s && !*s) ? "(empty)" : nonnull (s);
 }
 
 void
 lt_setenv (const char *name, const char *value)
 {
   lt_debugprintf (__FILE__, __LINE__,
                   "(lt_setenv) setting '%s' to '%s'\n",
                   nonnull (name), nonnull (value));
   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
     char *str = xstrdup (value);
     setenv (name, str, 1);
 #else
     int len = strlen (name) + 1 + strlen (value) + 1;
     char *str = XMALLOC (char, len);
     sprintf (str, "%s=%s", name, value);
     if (putenv (str) != EXIT_SUCCESS)
       {
         XFREE (str);
       }
 #endif
   }
 }
 
 char *
 lt_extend_str (const char *orig_value, const char *add, int to_end)
 {
   char *new_value;
   if (orig_value && *orig_value)
     {
       int orig_value_len = strlen (orig_value);
       int add_len = strlen (add);
       new_value = XMALLOC (char, add_len + orig_value_len + 1);
       if (to_end)
         {
           strcpy (new_value, orig_value);
           strcpy (new_value + orig_value_len, add);
         }
       else
         {
           strcpy (new_value, add);
           strcpy (new_value + add_len, orig_value);
         }
     }
   else
     {
       new_value = xstrdup (add);
     }
   return new_value;
 }
 
 void
 lt_update_exe_path (const char *name, const char *value)
 {
   lt_debugprintf (__FILE__, __LINE__,
                   "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
                   nonnull (name), nonnull (value));
 
   if (name && *name && value && *value)
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       /* some systems can't cope with a ':'-terminated path #' */
       int len = strlen (new_value);
       while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
         {
           new_value[len-1] = '\0';
         }
       lt_setenv (name, new_value);
       XFREE (new_value);
     }
 }
 
 void
 lt_update_lib_path (const char *name, const char *value)
 {
   lt_debugprintf (__FILE__, __LINE__,
                   "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
                   nonnull (name), nonnull (value));
 
   if (name && *name && value && *value)
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       lt_setenv (name, new_value);
       XFREE (new_value);
     }
 }
 
 EOF
             case $host_os in
               mingw*)
                 cat <<"EOF"
 
 /* Prepares an argument vector before calling spawn().
    Note that spawn() does not by itself call the command interpreter
      (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
       ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
          GetVersionEx(&v);
          v.dwPlatformId == VER_PLATFORM_WIN32_NT;
       }) ? "cmd.exe" : "command.com").
    Instead it simply concatenates the arguments, separated by ' ', and calls
    CreateProcess().  We must quote the arguments since Win32 CreateProcess()
    interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
    special way:
    - Space and tab are interpreted as delimiters. They are not treated as
      delimiters if they are surrounded by double quotes: "...".
    - Unescaped double quotes are removed from the input. Their only effect is
      that within double quotes, space and tab are treated like normal
      characters.
    - Backslashes not followed by double quotes are not special.
    - But 2*n+1 backslashes followed by a double quote become
      n backslashes followed by a double quote (n >= 0):
        \" -> "
        \\\" -> \"
        \\\\\" -> \\"
  */
 #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
 #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
 char **
 prepare_spawn (char **argv)
 {
   size_t argc;
   char **new_argv;
   size_t i;
 
   /* Count number of arguments.  */
   for (argc = 0; argv[argc] != NULL; argc++)
     ;
 
   /* Allocate new argument vector.  */
   new_argv = XMALLOC (char *, argc + 1);
 
   /* Put quoted arguments into the new argument vector.  */
   for (i = 0; i < argc; i++)
     {
       const char *string = argv[i];
 
       if (string[0] == '\0')
         new_argv[i] = xstrdup ("\"\"");
       else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
         {
           int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
           size_t length;
           unsigned int backslashes;
           const char *s;
           char *quoted_string;
           char *p;
 
           length = 0;
           backslashes = 0;
           if (quote_around)
             length++;
           for (s = string; *s != '\0'; s++)
             {
               char c = *s;
               if (c == '"')
                 length += backslashes + 1;
               length++;
               if (c == '\\')
                 backslashes++;
               else
                 backslashes = 0;
             }
           if (quote_around)
             length += backslashes + 1;
 
           quoted_string = XMALLOC (char, length + 1);
 
           p = quoted_string;
           backslashes = 0;
           if (quote_around)
             *p++ = '"';
           for (s = string; *s != '\0'; s++)
             {
               char c = *s;
               if (c == '"')
                 {
                   unsigned int j;
                   for (j = backslashes + 1; j > 0; j--)
                     *p++ = '\\';
                 }
               *p++ = c;
               if (c == '\\')
                 backslashes++;
               else
                 backslashes = 0;
             }
           if (quote_around)
             {
               unsigned int j;
               for (j = backslashes; j > 0; j--)
                 *p++ = '\\';
               *p++ = '"';
             }
           *p = '\0';
 
           new_argv[i] = quoted_string;
         }
       else
         new_argv[i] = (char *) string;
     }
   new_argv[argc] = NULL;
 
   return new_argv;
 }
 EOF
                 ;;
             esac
 
             cat <<"EOF"
 void lt_dump_script (FILE* f)
 {
 EOF
             func_emit_wrapper yes |
               $SED -e 's/\([\\"]\)/\\\1/g' \
                    -e 's/^/  fputs ("/' -e 's/$/\\n", f);/'
 
             cat <<"EOF"
 }
 EOF
 }
 # end: func_emit_cwrapperexe_src
 
 # func_win32_import_lib_p ARG
 # True if ARG is an import lib, as indicated by $file_magic_cmd
 func_win32_import_lib_p ()
 {
     $opt_debug
     case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
     *import*) : ;;
     *) false ;;
     esac
 }
 
 # func_mode_link arg...
 func_mode_link ()
 {
     $opt_debug
     case $host in      case $host in
    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and        # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out        # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra        # which system we are compiling for in order to pass an extra
Line 1084  EOF Line 5100  EOF
       allow_undefined=yes        allow_undefined=yes
       ;;        ;;
     esac      esac
    libtool_args="$nonopt"    libtool_args=$nonopt
     base_compile="$nonopt $@"      base_compile="$nonopt $@"
    compile_command="$nonopt"    compile_command=$nonopt
    finalize_command="$nonopt"    finalize_command=$nonopt
   
     compile_rpath=      compile_rpath=
     finalize_rpath=      finalize_rpath=
Line 1102  EOF Line 5118  EOF
     dllsearchpath=      dllsearchpath=
     lib_search_path=`pwd`      lib_search_path=`pwd`
     inst_prefix_dir=      inst_prefix_dir=
       new_inherited_linker_flags=
   
     avoid_version=no      avoid_version=no
       bindir=
     dlfiles=      dlfiles=
     dlprefiles=      dlprefiles=
     dlself=no      dlself=no
Line 1117  EOF Line 5135  EOF
     no_install=no      no_install=no
     objs=      objs=
     non_pic_objects=      non_pic_objects=
     notinst_path= # paths that contain not-installed libtool libraries  
     precious_files_regex=      precious_files_regex=
     prefer_static_libs=no      prefer_static_libs=no
     preload=no      preload=no
Line 1131  EOF Line 5148  EOF
     thread_safe=no      thread_safe=no
     vinfo=      vinfo=
     vinfo_number=no      vinfo_number=no
    weak_libs=
     single_module="${wl}-single_module"
     func_infer_tag $base_compile      func_infer_tag $base_compile
   
     # We need to know -static, to get the right output filenames.      # We need to know -static, to get the right output filenames.
     for arg      for arg
     do      do
       case $arg in        case $arg in
      -all-static | -static)      -shared)
        if test "X$arg" = "X-all-static"; then        test "$build_libtool_libs" != yes && \
           func_fatal_configuration "can not build a shared library"
         build_old_libs=no
         break
         ;;
       -all-static | -static | -static-libtool-libs)
         case $arg in
         -all-static)
           if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then            if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
            $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2            func_warning "complete static linking is impossible in this configuration"
           fi            fi
           if test -n "$link_static_flag"; then            if test -n "$link_static_flag"; then
             dlopen_self=$dlopen_self_static              dlopen_self=$dlopen_self_static
           fi            fi
           prefer_static_libs=yes            prefer_static_libs=yes
        else          ;;
         -static)
           if test -z "$pic_flag" && test -n "$link_static_flag"; then            if test -z "$pic_flag" && test -n "$link_static_flag"; then
             dlopen_self=$dlopen_self_static              dlopen_self=$dlopen_self_static
           fi            fi
           prefer_static_libs=built            prefer_static_libs=built
        fi          ;;
         -static-libtool-libs)
           if test -z "$pic_flag" && test -n "$link_static_flag"; then
             dlopen_self=$dlopen_self_static
           fi
           prefer_static_libs=yes
           ;;
         esac
         build_libtool_libs=no          build_libtool_libs=no
         build_old_libs=yes          build_old_libs=yes
         break          break
Line 1167  EOF Line 5200  EOF
     while test "$#" -gt 0; do      while test "$#" -gt 0; do
       arg="$1"        arg="$1"
       shift        shift
      case $arg in      func_quote_for_eval "$arg"
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")      qarg=$func_quote_for_eval_unquoted_result
        qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test      func_append libtool_args " $func_quote_for_eval_result"
        ;; 
      *) qarg=$arg ;; 
      esac 
      libtool_args="$libtool_args $qarg" 
   
       # If the previous option needs an argument, assign it.        # If the previous option needs an argument, assign it.
       if test -n "$prev"; then        if test -n "$prev"; then
         case $prev in          case $prev in
         output)          output)
          compile_command="$compile_command @OUTPUT@"          func_append compile_command " @OUTPUT@"
          finalize_command="$finalize_command @OUTPUT@"          func_append finalize_command " @OUTPUT@"
           ;;            ;;
         esac          esac
   
         case $prev in          case $prev in
           bindir)
             bindir="$arg"
             prev=
             continue
             ;;
         dlfiles|dlprefiles)          dlfiles|dlprefiles)
           if test "$preload" = no; then            if test "$preload" = no; then
             # Add the symbol object into the linking commands.              # Add the symbol object into the linking commands.
            compile_command="$compile_command @SYMFILE@"            func_append compile_command " @SYMFILE@"
            finalize_command="$finalize_command @SYMFILE@"            func_append finalize_command " @SYMFILE@"
             preload=yes              preload=yes
           fi            fi
           case $arg in            case $arg in
Line 1216  EOF Line 5250  EOF
             ;;              ;;
           *)            *)
             if test "$prev" = dlfiles; then              if test "$prev" = dlfiles; then
              dlfiles="$dlfiles $arg"              func_append dlfiles " $arg"
             else              else
              dlprefiles="$dlprefiles $arg"              func_append dlprefiles " $arg"
             fi              fi
             prev=              prev=
             continue              continue
Line 1227  EOF Line 5261  EOF
           ;;            ;;
         expsyms)          expsyms)
           export_symbols="$arg"            export_symbols="$arg"
          if test ! -f "$arg"; then          test -f "$arg" \
            $echo "$modename: symbol file \`$arg' does not exist"            || func_fatal_error "symbol file \`$arg' does not exist"
            exit $EXIT_FAILURE 
          fi 
           prev=            prev=
           continue            continue
           ;;            ;;
Line 1239  EOF Line 5271  EOF
           prev=            prev=
           continue            continue
           ;;            ;;
        inst_prefix)        framework)
          inst_prefix_dir="$arg"          case $host in
             *-*-darwin*)
               case "$deplibs " in
                 *" $qarg.ltframework "*) ;;
                 *) func_append deplibs " $qarg.ltframework" # this is fixed later
                    ;;
               esac
               ;;
           esac
           prev=            prev=
           continue            continue
           ;;            ;;
        precious_regex)        inst_prefix)
          precious_files_regex="$arg"          inst_prefix_dir="$arg"
           prev=            prev=
           continue            continue
           ;;            ;;
         release)  
           release="-$arg"  
           prev=  
           continue  
           ;;  
         objectlist)          objectlist)
           if test -f "$arg"; then            if test -f "$arg"; then
             save_arg=$arg              save_arg=$arg
             moreargs=              moreargs=
            for fil in `cat $save_arg`            for fil in `cat "$save_arg"`
             do              do
#             moreargs="$moreargs $fil"#             func_append moreargs " $fil"
               arg=$fil                arg=$fil
               # A libtool-controlled object.                # A libtool-controlled object.
   
               # Check to see that this really is a libtool object.                # Check to see that this really is a libtool object.
              if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then              if func_lalib_unsafe_p "$arg"; then
                 pic_object=                  pic_object=
                 non_pic_object=                  non_pic_object=
   
                 # Read the .lo file                  # Read the .lo file
                # If there is no directory component, then add one.                func_source "$arg"
                case $arg in 
                */* | *\\*) . $arg ;; 
                *) . ./$arg ;; 
                esac 
   
                if test -z "$pic_object" || \                if test -z "$pic_object" ||
                    test -z "$non_pic_object" ||                     test -z "$non_pic_object" ||
                   test "$pic_object" = none && \                   test "$pic_object" = none &&
                    test "$non_pic_object" = none; then                     test "$non_pic_object" = none; then
                  $echo "$modename: cannot find name of object for \`$arg'" 1>&2                  func_fatal_error "cannot find name of object for \`$arg'"
                  exit $EXIT_FAILURE 
                 fi                  fi
   
                 # Extract subdirectory from the argument.                  # Extract subdirectory from the argument.
                xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`                func_dirname "$arg" "/" ""
                if test "X$xdir" = "X$arg"; then                xdir="$func_dirname_result"
                  xdir= 
                else 
                  xdir="$xdir/" 
                fi 
   
                 if test "$pic_object" != none; then                  if test "$pic_object" != none; then
                   # Prepend the subdirectory the object is found in.                    # Prepend the subdirectory the object is found in.
Line 1298  EOF Line 5324  EOF
   
                   if test "$prev" = dlfiles; then                    if test "$prev" = dlfiles; then
                     if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then                      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
                      dlfiles="$dlfiles $pic_object"                      func_append dlfiles " $pic_object"
                       prev=                        prev=
                       continue                        continue
                     else                      else
Line 1310  EOF Line 5336  EOF
                   # CHECK ME:  I think I busted this.  -Ossama                    # CHECK ME:  I think I busted this.  -Ossama
                   if test "$prev" = dlprefiles; then                    if test "$prev" = dlprefiles; then
                     # Preload the old-style object.                      # Preload the old-style object.
                    dlprefiles="$dlprefiles $pic_object"                    func_append dlprefiles " $pic_object"
                     prev=                      prev=
                   fi                    fi
   
                   # A PIC object.                    # A PIC object.
                  libobjs="$libobjs $pic_object"                  func_append libobjs " $pic_object"
                   arg="$pic_object"                    arg="$pic_object"
                 fi                  fi
   
Line 1325  EOF Line 5351  EOF
                   non_pic_object="$xdir$non_pic_object"                    non_pic_object="$xdir$non_pic_object"
   
                   # A standard non-PIC object                    # A standard non-PIC object
                  non_pic_objects="$non_pic_objects $non_pic_object"                  func_append non_pic_objects " $non_pic_object"
                   if test -z "$pic_object" || test "$pic_object" = none ; then                    if test -z "$pic_object" || test "$pic_object" = none ; then
                     arg="$non_pic_object"                      arg="$non_pic_object"
                   fi                    fi
Line 1333  EOF Line 5359  EOF
                   # If the PIC object exists, use it instead.                    # If the PIC object exists, use it instead.
                   # $xdir was prepended to $pic_object above.                    # $xdir was prepended to $pic_object above.
                   non_pic_object="$pic_object"                    non_pic_object="$pic_object"
                  non_pic_objects="$non_pic_objects $non_pic_object"                  func_append non_pic_objects " $non_pic_object"
                 fi                  fi
               else                else
                 # Only an error if not doing a dry-run.                  # Only an error if not doing a dry-run.
                if test -z "$run"; then                if $opt_dry_run; then
                  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 
                  exit $EXIT_FAILURE 
                else 
                  # Dry-run case. 
 
                   # Extract subdirectory from the argument.                    # Extract subdirectory from the argument.
                  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`                  func_dirname "$arg" "/" ""
                  if test "X$xdir" = "X$arg"; then                  xdir="$func_dirname_result"
                    xdir= 
                  else 
                    xdir="$xdir/" 
                  fi 
   
                  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`                  func_lo2o "$arg"
                  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`                  pic_object=$xdir$objdir/$func_lo2o_result
                  libobjs="$libobjs $pic_object"                  non_pic_object=$xdir$func_lo2o_result
                  non_pic_objects="$non_pic_objects $non_pic_object"                  func_append libobjs " $pic_object"
                   func_append non_pic_objects " $non_pic_object"
                 else
                   func_fatal_error "\`$arg' is not a valid libtool object"
                 fi                  fi
               fi                fi
             done              done
           else            else
            $echo "$modename: link input file \`$save_arg' does not exist"            func_fatal_error "link input file \`$arg' does not exist"
            exit $EXIT_FAILURE 
           fi            fi
           arg=$save_arg            arg=$save_arg
           prev=            prev=
           continue            continue
           ;;            ;;
           precious_regex)
             precious_files_regex="$arg"
             prev=
             continue
             ;;
           release)
             release="-$arg"
             prev=
             continue
             ;;
         rpath | xrpath)          rpath | xrpath)
           # We need an absolute path.            # We need an absolute path.
           case $arg in            case $arg in
           [\\/]* | [A-Za-z]:[\\/]*) ;;            [\\/]* | [A-Za-z]:[\\/]*) ;;
           *)            *)
            $echo "$modename: only absolute run-paths are allowed" 1>&2            func_fatal_error "only absolute run-paths are allowed"
            exit $EXIT_FAILURE 
             ;;              ;;
           esac            esac
           if test "$prev" = rpath; then            if test "$prev" = rpath; then
             case "$rpath " in              case "$rpath " in
             *" $arg "*) ;;              *" $arg "*) ;;
            *) rpath="$rpath $arg" ;;            *) func_append rpath " $arg" ;;
             esac              esac
           else            else
             case "$xrpath " in              case "$xrpath " in
             *" $arg "*) ;;              *" $arg "*) ;;
            *) xrpath="$xrpath $arg" ;;            *) func_append xrpath " $arg" ;;
             esac              esac
           fi            fi
           prev=            prev=
           continue            continue
           ;;            ;;
        xcompiler)        shrext)
          compiler_flags="$compiler_flags $qarg"          shrext_cmds="$arg"
           prev=            prev=
           compile_command="$compile_command $qarg"  
           finalize_command="$finalize_command $qarg"  
           continue            continue
           ;;            ;;
        xlinker)        weak)
          linker_flags="$linker_flags $qarg"          func_append weak_libs " $arg"
          compiler_flags="$compiler_flags $wl$qarg" 
           prev=            prev=
           compile_command="$compile_command $wl$qarg"  
           finalize_command="$finalize_command $wl$qarg"  
           continue            continue
           ;;            ;;
         xcclinker)          xcclinker)
          linker_flags="$linker_flags $qarg"          func_append linker_flags " $qarg"
          compiler_flags="$compiler_flags $qarg"          func_append compiler_flags " $qarg"
           prev=            prev=
          compile_command="$compile_command $qarg"          func_append compile_command " $qarg"
          finalize_command="$finalize_command $qarg"          func_append finalize_command " $qarg"
           continue            continue
           ;;            ;;
        shrext)        xcompiler)
          shrext_cmds="$arg"          func_append compiler_flags " $qarg"
           prev=            prev=
             func_append compile_command " $qarg"
             func_append finalize_command " $qarg"
           continue            continue
           ;;            ;;
        darwin_framework|darwin_framework_skip)        xlinker)
          test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"          func_append linker_flags " $qarg"
          compile_command="$compile_command $arg"          func_append compiler_flags " $wl$qarg"
          finalize_command="$finalize_command $arg" 
           prev=            prev=
             func_append compile_command " $wl$qarg"
             func_append finalize_command " $wl$qarg"
           continue            continue
           ;;            ;;
         *)          *)
Line 1437  EOF Line 5463  EOF
       case $arg in        case $arg in
       -all-static)        -all-static)
         if test -n "$link_static_flag"; then          if test -n "$link_static_flag"; then
          compile_command="$compile_command $link_static_flag"          # See comment for -static flag below, for more details.
          finalize_command="$finalize_command $link_static_flag"          func_append compile_command " $link_static_flag"
           func_append finalize_command " $link_static_flag"
         fi          fi
         continue          continue
         ;;          ;;
   
       -allow-undefined)        -allow-undefined)
         # FIXME: remove this flag sometime in the future.          # FIXME: remove this flag sometime in the future.
        $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2        func_fatal_error "\`-allow-undefined' must not be used because it is the default"
        continue 
         ;;          ;;
   
       -avoid-version)        -avoid-version)
Line 1454  EOF Line 5480  EOF
         continue          continue
         ;;          ;;
   
         -bindir)
           prev=bindir
           continue
           ;;
   
       -dlopen)        -dlopen)
         prev=dlfiles          prev=dlfiles
         continue          continue
Line 1471  EOF Line 5502  EOF
   
       -export-symbols | -export-symbols-regex)        -export-symbols | -export-symbols-regex)
         if test -n "$export_symbols" || test -n "$export_symbols_regex"; then          if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
          $echo "$modename: more than one -exported-symbols argument is not allowed"          func_fatal_error "more than one -exported-symbols argument is not allowed"
          exit $EXIT_FAILURE 
         fi          fi
         if test "X$arg" = "X-export-symbols"; then          if test "X$arg" = "X-export-symbols"; then
           prev=expsyms            prev=expsyms
Line 1482  EOF Line 5512  EOF
         continue          continue
         ;;          ;;
   
      -framework|-arch|-isysroot)      -framework)
        case " $CC " in        prev=framework
          *" ${arg} ${1} "* | *" ${arg} ${1} "*)  
                prev=darwin_framework_skip ;; 
          *) compiler_flags="$compiler_flags $arg" 
             prev=darwin_framework ;; 
        esac 
        compile_command="$compile_command $arg" 
        finalize_command="$finalize_command $arg" 
         continue          continue
         ;;          ;;
   
Line 1504  EOF Line 5527  EOF
       -L[A-Z][A-Z]*:*)        -L[A-Z][A-Z]*:*)
         case $with_gcc/$host in          case $with_gcc/$host in
         no/*-*-irix* | /*-*-irix*)          no/*-*-irix* | /*-*-irix*)
          compile_command="$compile_command $arg"          func_append compile_command " $arg"
          finalize_command="$finalize_command $arg"          func_append finalize_command " $arg"
           ;;            ;;
         esac          esac
         continue          continue
         ;;          ;;
   
       -L*)        -L*)
        dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`        func_stripname "-L" '' "$arg"
         if test -z "$func_stripname_result"; then
           if test "$#" -gt 0; then
             func_fatal_error "require no space between \`-L' and \`$1'"
           else
             func_fatal_error "need path for \`-L' option"
           fi
         fi
         func_resolve_sysroot "$func_stripname_result"
         dir=$func_resolve_sysroot_result
         # We need an absolute path.          # We need an absolute path.
         case $dir in          case $dir in
         [\\/]* | [A-Za-z]:[\\/]*) ;;          [\\/]* | [A-Za-z]:[\\/]*) ;;
         *)          *)
           absdir=`cd "$dir" && pwd`            absdir=`cd "$dir" && pwd`
          if test -z "$absdir"; then          test -z "$absdir" && \
            $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2            func_fatal_error "cannot determine absolute directory name of \`$dir'"
            absdir="$dir" 
            notinst_path="$notinst_path $dir" 
          fi 
           dir="$absdir"            dir="$absdir"
           ;;            ;;
         esac          esac
         case "$deplibs " in          case "$deplibs " in
        *" -L$dir "*) ;;        *" -L$dir "* | *" $arg "*)
           # Will only happen for absolute or sysroot arguments
           ;;
         *)          *)
          deplibs="$deplibs -L$dir"          # Preserve sysroot, but never include relative directories
          lib_search_path="$lib_search_path $dir"          case $dir in
             [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
             *) func_append deplibs " -L$dir" ;;
           esac
           func_append lib_search_path " $dir"
           ;;            ;;
         esac          esac
         case $host in          case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
          testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`          testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
           case :$dllsearchpath: in            case :$dllsearchpath: in
           *":$dir:"*) ;;            *":$dir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$dir";;          ::) dllsearchpath=$dir;;
           *) func_append dllsearchpath ":$dir";;
           esac            esac
           case :$dllsearchpath: in            case :$dllsearchpath: in
           *":$testbindir:"*) ;;            *":$testbindir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$testbindir";;          ::) dllsearchpath=$testbindir;;
           *) func_append dllsearchpath ":$testbindir";;
           esac            esac
           ;;            ;;
         esac          esac
Line 1552  EOF Line 5589  EOF
       -l*)        -l*)
         if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then          if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
           case $host in            case $host in
          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
             # These systems don't actually have a C or math library (as such)              # These systems don't actually have a C or math library (as such)
             continue              continue
             ;;              ;;
Line 1566  EOF Line 5603  EOF
             ;;              ;;
           *-*-rhapsody* | *-*-darwin1.[012])            *-*-rhapsody* | *-*-darwin1.[012])
             # Rhapsody C and math libraries are in the System framework              # Rhapsody C and math libraries are in the System framework
            deplibs="$deplibs -framework System"            func_append deplibs " System.ltframework"
             continue              continue
             ;;              ;;
           *-*-sco3.2v5* | *-*-sco5v6*)            *-*-sco3.2v5* | *-*-sco5v6*)
Line 1586  EOF Line 5623  EOF
            ;;             ;;
          esac           esac
         fi          fi
        deplibs="$deplibs $arg"        func_append deplibs " $arg"
         continue          continue
         ;;          ;;
   
         -module)
           module=yes
           continue
           ;;
   
       # Tru64 UNIX uses -model [arg] to determine the layout of C++        # Tru64 UNIX uses -model [arg] to determine the layout of C++
       # classes, name mangling, and exception handling.        # classes, name mangling, and exception handling.
      -model)      # Darwin uses the -arch flag to determine output architecture.
        compile_command="$compile_command $arg"      -model|-arch|-isysroot|--sysroot)
        compiler_flags="$compiler_flags $arg"        func_append compiler_flags " $arg"
        finalize_command="$finalize_command $arg"        func_append compile_command " $arg"
         func_append finalize_command " $arg"
         prev=xcompiler          prev=xcompiler
         continue          continue
         ;;          ;;
   
     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
        compiler_flags="$compiler_flags $arg"        func_append compiler_flags " $arg"
        compile_command="$compile_command $arg"        func_append compile_command " $arg"
        finalize_command="$finalize_command $arg"        func_append finalize_command " $arg"
         case "$new_inherited_linker_flags " in
             *" $arg "*) ;;
             * ) func_append new_inherited_linker_flags " $arg" ;;
         esac
         continue          continue
         ;;          ;;
   
      -module)      -multi_module)
        module=yes        single_module="${wl}-multi_module"
         continue          continue
         ;;          ;;
   
       # -64, -mips[0-9] enable 64-bit mode on the SGI compiler  
       # -r[0-9][0-9]* specifies the processor on the SGI compiler  
       # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler  
       # +DA*, +DD* enable 64-bit mode on the HP compiler  
       # -q* pass through compiler args for the IBM compiler  
       # -m* pass through architecture-specific compiler args for GCC  
       # -m*, -t[45]*, -txscale* pass through architecture-specific  
       # compiler args for GCC  
       # -pg pass through profiling flag for GCC  
       # @file GCC response files  
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \  
       -t[45]*|-txscale*|@*)  
   
         # Unknown arguments in both finalize_command and compile_command need  
         # to be aesthetically quoted because they are evaled later.  
         arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`  
         case $arg in  
         *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")  
           arg="\"$arg\""  
           ;;  
         esac  
         compile_command="$compile_command $arg"  
         finalize_command="$finalize_command $arg"  
         compiler_flags="$compiler_flags $arg"  
         continue  
         ;;  
   
       -shrext)  
         prev=shrext  
         continue  
         ;;  
   
       -no-fast-install)        -no-fast-install)
         fast_install=no          fast_install=no
         continue          continue
Line 1651  EOF Line 5666  EOF
   
       -no-install)        -no-install)
         case $host in          case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
           # The PATH hackery in wrapper scripts is required on Windows            # The PATH hackery in wrapper scripts is required on Windows
          # in order for the loader to find any dlls it needs.          # and Darwin in order for the loader to find any dlls it needs.
          $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2          func_warning "\`-no-install' is ignored for $host"
          $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2          func_warning "assuming \`-no-fast-install' instead"
           fast_install=no            fast_install=no
           ;;            ;;
         *) no_install=yes ;;          *) no_install=yes ;;
Line 1696  EOF Line 5711  EOF
         ;;          ;;
   
       -R*)        -R*)
        dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`        func_stripname '-R' '' "$arg"
         dir=$func_stripname_result
         # We need an absolute path.          # We need an absolute path.
         case $dir in          case $dir in
         [\\/]* | [A-Za-z]:[\\/]*) ;;          [\\/]* | [A-Za-z]:[\\/]*) ;;
           =*)
             func_stripname '=' '' "$dir"
             dir=$lt_sysroot$func_stripname_result
             ;;
         *)          *)
          $echo "$modename: only absolute run-paths are allowed" 1>&2          func_fatal_error "only absolute run-paths are allowed"
          exit $EXIT_FAILURE 
           ;;            ;;
         esac          esac
         case "$xrpath " in          case "$xrpath " in
         *" $dir "*) ;;          *" $dir "*) ;;
        *) xrpath="$xrpath $dir" ;;        *) func_append xrpath " $dir" ;;
         esac          esac
         continue          continue
         ;;          ;;
   
      -static)      -shared)
         # The effects of -shared are defined in a previous loop.
         continue
         ;;
 
       -shrext)
         prev=shrext
         continue
         ;;
 
       -static | -static-libtool-libs)
         # The effects of -static are defined in a previous loop.          # The effects of -static are defined in a previous loop.
         # We used to do the same as -all-static on platforms that          # We used to do the same as -all-static on platforms that
         # didn't have a PIC flag, but the assumption that the effects          # didn't have a PIC flag, but the assumption that the effects
Line 1730  EOF Line 5759  EOF
         prev=vinfo          prev=vinfo
         continue          continue
         ;;          ;;
   
       -version-number)        -version-number)
         prev=vinfo          prev=vinfo
         vinfo_number=yes          vinfo_number=yes
         continue          continue
         ;;          ;;
   
         -weak)
           prev=weak
           continue
           ;;
   
       -Wc,*)        -Wc,*)
        args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`        func_stripname '-Wc,' '' "$arg"
         args=$func_stripname_result
         arg=          arg=
         save_ifs="$IFS"; IFS=','          save_ifs="$IFS"; IFS=','
         for flag in $args; do          for flag in $args; do
           IFS="$save_ifs"            IFS="$save_ifs"
          case $flag in          func_quote_for_eval "$flag"
            *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")          func_append arg " $func_quote_for_eval_result"
            flag="\"$flag\""          func_append compiler_flags " $func_quote_for_eval_result"
            ;; 
          esac 
          arg="$arg $wl$flag" 
          compiler_flags="$compiler_flags $flag" 
         done          done
         IFS="$save_ifs"          IFS="$save_ifs"
        arg=`$echo "X$arg" | $Xsed -e "s/^ //"`        func_stripname ' ' '' "$arg"
         arg=$func_stripname_result
         ;;          ;;
   
       -Wl,*)        -Wl,*)
        args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`        func_stripname '-Wl,' '' "$arg"
         args=$func_stripname_result
         arg=          arg=
         save_ifs="$IFS"; IFS=','          save_ifs="$IFS"; IFS=','
         for flag in $args; do          for flag in $args; do
           IFS="$save_ifs"            IFS="$save_ifs"
          case $flag in          func_quote_for_eval "$flag"
            *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")          func_append arg " $wl$func_quote_for_eval_result"
            flag="\"$flag\""          func_append compiler_flags " $wl$func_quote_for_eval_result"
            ;;          func_append linker_flags " $func_quote_for_eval_result"
          esac 
          arg="$arg $wl$flag" 
          compiler_flags="$compiler_flags $wl$flag" 
          linker_flags="$linker_flags $flag" 
         done          done
         IFS="$save_ifs"          IFS="$save_ifs"
        arg=`$echo "X$arg" | $Xsed -e "s/^ //"`        func_stripname ' ' '' "$arg"
         arg=$func_stripname_result
         ;;          ;;
   
       -Xcompiler)        -Xcompiler)
Line 1788  EOF Line 5819  EOF
         continue          continue
         ;;          ;;
   
         # -msg_* for osf cc
         -msg_*)
           func_quote_for_eval "$arg"
           arg="$func_quote_for_eval_result"
           ;;
   
         # Flags to be passed through unchanged, with rationale:
         # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
         # -r[0-9][0-9]*        specify processor for the SGI compiler
         # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
         # +DA*, +DD*           enable 64-bit mode for the HP compiler
         # -q*                  compiler args for the IBM compiler
         # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
         # -F/path              path to uninstalled frameworks, gcc on darwin
         # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
         # @file                GCC response files
         # -tp=*                Portland pgcc target processor selection
         # --sysroot=*          for sysroot support
         # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
         -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
         -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
         -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
           func_quote_for_eval "$arg"
           arg="$func_quote_for_eval_result"
           func_append compile_command " $arg"
           func_append finalize_command " $arg"
           func_append compiler_flags " $arg"
           continue
           ;;
   
       # Some other compiler flag.        # Some other compiler flag.
       -* | +*)        -* | +*)
        # Unknown arguments in both finalize_command and compile_command need        func_quote_for_eval "$arg"
        # to be aesthetically quoted because they are evaled later.        arg="$func_quote_for_eval_result"
        arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` 
        case $arg in 
        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"") 
          arg="\"$arg\"" 
          ;; 
        esac 
         ;;          ;;
   
       *.$objext)        *.$objext)
         # A standard object.          # A standard object.
        objs="$objs $arg"        func_append objs " $arg"
         ;;          ;;
   
       *.lo)        *.lo)
         # A libtool-controlled object.          # A libtool-controlled object.
   
         # Check to see that this really is a libtool object.          # Check to see that this really is a libtool object.
        if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then        if func_lalib_unsafe_p "$arg"; then
           pic_object=            pic_object=
           non_pic_object=            non_pic_object=
   
           # Read the .lo file            # Read the .lo file
          # If there is no directory component, then add one.          func_source "$arg"
          case $arg in 
          */* | *\\*) . $arg ;; 
          *) . ./$arg ;; 
          esac 
   
          if test -z "$pic_object" || \          if test -z "$pic_object" ||
              test -z "$non_pic_object" ||               test -z "$non_pic_object" ||
             test "$pic_object" = none && \             test "$pic_object" = none &&
              test "$non_pic_object" = none; then               test "$non_pic_object" = none; then
            $echo "$modename: cannot find name of object for \`$arg'" 1>&2            func_fatal_error "cannot find name of object for \`$arg'"
            exit $EXIT_FAILURE 
           fi            fi
   
           # Extract subdirectory from the argument.            # Extract subdirectory from the argument.
          xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`          func_dirname "$arg" "/" ""
          if test "X$xdir" = "X$arg"; then          xdir="$func_dirname_result"
            xdir= 
          else 
            xdir="$xdir/" 
          fi 
   
           if test "$pic_object" != none; then            if test "$pic_object" != none; then
             # Prepend the subdirectory the object is found in.              # Prepend the subdirectory the object is found in.
Line 1842  EOF Line 5888  EOF
   
             if test "$prev" = dlfiles; then              if test "$prev" = dlfiles; then
               if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then                if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
                dlfiles="$dlfiles $pic_object"                func_append dlfiles " $pic_object"
                 prev=                  prev=
                 continue                  continue
               else                else
Line 1854  EOF Line 5900  EOF
             # CHECK ME:  I think I busted this.  -Ossama              # CHECK ME:  I think I busted this.  -Ossama
             if test "$prev" = dlprefiles; then              if test "$prev" = dlprefiles; then
               # Preload the old-style object.                # Preload the old-style object.
              dlprefiles="$dlprefiles $pic_object"              func_append dlprefiles " $pic_object"
               prev=                prev=
             fi              fi
   
             # A PIC object.              # A PIC object.
            libobjs="$libobjs $pic_object"            func_append libobjs " $pic_object"
             arg="$pic_object"              arg="$pic_object"
           fi            fi
   
Line 1869  EOF Line 5915  EOF
             non_pic_object="$xdir$non_pic_object"              non_pic_object="$xdir$non_pic_object"
   
             # A standard non-PIC object              # A standard non-PIC object
            non_pic_objects="$non_pic_objects $non_pic_object"            func_append non_pic_objects " $non_pic_object"
             if test -z "$pic_object" || test "$pic_object" = none ; then              if test -z "$pic_object" || test "$pic_object" = none ; then
               arg="$non_pic_object"                arg="$non_pic_object"
             fi              fi
Line 1877  EOF Line 5923  EOF
             # If the PIC object exists, use it instead.              # If the PIC object exists, use it instead.
             # $xdir was prepended to $pic_object above.              # $xdir was prepended to $pic_object above.
             non_pic_object="$pic_object"              non_pic_object="$pic_object"
            non_pic_objects="$non_pic_objects $non_pic_object"            func_append non_pic_objects " $non_pic_object"
           fi            fi
         else          else
           # Only an error if not doing a dry-run.            # Only an error if not doing a dry-run.
          if test -z "$run"; then          if $opt_dry_run; then
            $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 
            exit $EXIT_FAILURE 
          else 
            # Dry-run case. 
 
             # Extract subdirectory from the argument.              # Extract subdirectory from the argument.
            xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`            func_dirname "$arg" "/" ""
            if test "X$xdir" = "X$arg"; then            xdir="$func_dirname_result"
              xdir= 
            else 
              xdir="$xdir/" 
            fi 
   
            pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`            func_lo2o "$arg"
            non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`            pic_object=$xdir$objdir/$func_lo2o_result
            libobjs="$libobjs $pic_object"            non_pic_object=$xdir$func_lo2o_result
            non_pic_objects="$non_pic_objects $non_pic_object"            func_append libobjs " $pic_object"
             func_append non_pic_objects " $non_pic_object"
           else
             func_fatal_error "\`$arg' is not a valid libtool object"
           fi            fi
         fi          fi
         ;;          ;;
   
       *.$libext)        *.$libext)
         # An archive.          # An archive.
        deplibs="$deplibs $arg"        func_append deplibs " $arg"
        old_deplibs="$old_deplibs $arg"        func_append old_deplibs " $arg"
         continue          continue
         ;;          ;;
   
       *.la)        *.la)
         # A libtool-controlled library.          # A libtool-controlled library.
   
           func_resolve_sysroot "$arg"
         if test "$prev" = dlfiles; then          if test "$prev" = dlfiles; then
           # This library was specified with -dlopen.            # This library was specified with -dlopen.
          dlfiles="$dlfiles $arg"          func_append dlfiles " $func_resolve_sysroot_result"
           prev=            prev=
         elif test "$prev" = dlprefiles; then          elif test "$prev" = dlprefiles; then
           # The library was specified with -dlpreopen.            # The library was specified with -dlpreopen.
          dlprefiles="$dlprefiles $arg"          func_append dlprefiles " $func_resolve_sysroot_result"
           prev=            prev=
         else          else
          deplibs="$deplibs $arg"          func_append deplibs " $func_resolve_sysroot_result"
         fi          fi
         continue          continue
         ;;          ;;
Line 1931  EOF Line 5972  EOF
       *)        *)
         # Unknown arguments in both finalize_command and compile_command need          # Unknown arguments in both finalize_command and compile_command need
         # to be aesthetically quoted because they are evaled later.          # to be aesthetically quoted because they are evaled later.
        arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`        func_quote_for_eval "$arg"
        case $arg in        arg="$func_quote_for_eval_result"
        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"") 
          arg="\"$arg\"" 
          ;; 
        esac 
         ;;          ;;
       esac # arg        esac # arg
   
       # Now actually substitute the argument into the commands.        # Now actually substitute the argument into the commands.
       if test -n "$arg"; then        if test -n "$arg"; then
        compile_command="$compile_command $arg"        func_append compile_command " $arg"
        finalize_command="$finalize_command $arg"        func_append finalize_command " $arg"
       fi        fi
     done # argument parsing loop      done # argument parsing loop
   
    if test -n "$prev"; then    test -n "$prev" && \
      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2      func_fatal_help "the \`$prevarg' option requires an argument"
      $echo "$help" 1>&2 
      exit $EXIT_FAILURE 
    fi 
   
     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then      if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"        eval arg=\"$export_dynamic_flag_spec\"
      compile_command="$compile_command $arg"      func_append compile_command " $arg"
      finalize_command="$finalize_command $arg"      func_append finalize_command " $arg"
     fi      fi
   
     oldlibs=      oldlibs=
     # calculate the name of the file, without its directory      # calculate the name of the file, without its directory
    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`    func_basename "$output"
     outputname="$func_basename_result"
     libobjs_save="$libobjs"      libobjs_save="$libobjs"
   
     if test -n "$shlibpath_var"; then      if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var        # get the directories listed in $shlibpath_var
      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
     else      else
       shlib_search_path=        shlib_search_path=
     fi      fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"      eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"      eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
   
    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`    func_dirname "$output" "/" ""
    if test "X$output_objdir" = "X$output"; then    output_objdir="$func_dirname_result$objdir"
      output_objdir="$objdir"    func_to_tool_file "$output_objdir/"
    else    tool_output_objdir=$func_to_tool_file_result
      output_objdir="$output_objdir/$objdir" 
    fi 
     # Create the object directory.      # Create the object directory.
    if test ! -d "$output_objdir"; then    func_mkdir_p "$output_objdir"
      $show "$mkdir $output_objdir" 
      $run $mkdir $output_objdir 
      exit_status=$? 
      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then 
        exit $exit_status 
      fi 
    fi 
   
     # Determine the type of output      # Determine the type of output
     case $output in      case $output in
     "")      "")
      $echo "$modename: you must specify an output file" 1>&2      func_fatal_help "you must specify an output file"
      $echo "$help" 1>&2 
      exit $EXIT_FAILURE 
       ;;        ;;
     *.$libext) linkmode=oldlib ;;      *.$libext) linkmode=oldlib ;;
     *.lo | *.$objext) linkmode=obj ;;      *.lo | *.$objext) linkmode=obj ;;
Line 2002  EOF Line 6026  EOF
     *) linkmode=prog ;; # Anything else should be a program.      *) linkmode=prog ;; # Anything else should be a program.
     esac      esac
   
     case $host in  
     *cygwin* | *mingw* | *pw32*)  
       # don't eliminate duplications in $postdeps and $predeps  
       duplicate_compiler_generated_deps=yes  
       ;;  
     *)  
       duplicate_compiler_generated_deps=$duplicate_deps  
       ;;  
     esac  
     specialdeplibs=      specialdeplibs=
   
     libs=      libs=
     # Find all interdependent deplibs by searching for libraries      # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)      # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do      for deplib in $deplibs; do
      if test "X$duplicate_deps" = "Xyes" ; then      if $opt_preserve_dup_deps ; then
         case "$libs " in          case "$libs " in
        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;        *" $deplib "*) func_append specialdeplibs " $deplib" ;;
         esac          esac
       fi        fi
      libs="$libs $deplib"      func_append libs " $deplib"
     done      done
   
     if test "$linkmode" = lib; then      if test "$linkmode" = lib; then
Line 2032  EOF Line 6047  EOF
       # $postdeps and mark them as special (i.e., whose duplicates are        # $postdeps and mark them as special (i.e., whose duplicates are
       # not to be eliminated).        # not to be eliminated).
       pre_post_deps=        pre_post_deps=
      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then      if $opt_duplicate_compiler_generated_deps; then
         for pre_post_dep in $predeps $postdeps; do          for pre_post_dep in $predeps $postdeps; do
           case "$pre_post_deps " in            case "$pre_post_deps " in
          *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;          *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
           esac            esac
          pre_post_deps="$pre_post_deps $pre_post_dep"          func_append pre_post_deps " $pre_post_dep"
         done          done
       fi        fi
       pre_post_deps=        pre_post_deps=
Line 2048  EOF Line 6063  EOF
     newlib_search_path=      newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries      need_relink=no # whether we're linking any uninstalled libtool libraries
     notinst_deplibs= # not-installed libtool libraries      notinst_deplibs= # not-installed libtool libraries
       notinst_path= # paths that contain not-installed libtool libraries
   
     case $linkmode in      case $linkmode in
     lib)      lib)
        passes="conv link"        passes="conv dlpreopen link"
         for file in $dlfiles $dlprefiles; do          for file in $dlfiles $dlprefiles; do
           case $file in            case $file in
           *.la) ;;            *.la) ;;
           *)            *)
            $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2            func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
            exit $EXIT_FAILURE 
             ;;              ;;
           esac            esac
         done          done
Line 2072  EOF Line 6088  EOF
     *)  passes="conv"      *)  passes="conv"
         ;;          ;;
     esac      esac
   
     for pass in $passes; do      for pass in $passes; do
         # The preopen pass in lib mode reverses $deplibs; put it back here
         # so that -L comes before libs that need it for instance...
         if test "$linkmode,$pass" = "lib,link"; then
           ## FIXME: Find the place where the list is rebuilt in the wrong
           ##        order, and fix it there properly
           tmp_deplibs=
           for deplib in $deplibs; do
             tmp_deplibs="$deplib $tmp_deplibs"
           done
           deplibs="$tmp_deplibs"
         fi
   
       if test "$linkmode,$pass" = "lib,link" ||        if test "$linkmode,$pass" = "lib,link" ||
          test "$linkmode,$pass" = "prog,scan"; then           test "$linkmode,$pass" = "prog,scan"; then
         libs="$deplibs"          libs="$deplibs"
Line 2082  EOF Line 6111  EOF
         case $pass in          case $pass in
         dlopen) libs="$dlfiles" ;;          dlopen) libs="$dlfiles" ;;
         dlpreopen) libs="$dlprefiles" ;;          dlpreopen) libs="$dlprefiles" ;;
        link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;        link)
           libs="$deplibs %DEPLIBS%"
           test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
           ;;
         esac          esac
       fi        fi
         if test "$linkmode,$pass" = "lib,dlpreopen"; then
           # Collect and forward deplibs of preopened libtool libs
           for lib in $dlprefiles; do
             # Ignore non-libtool-libs
             dependency_libs=
             func_resolve_sysroot "$lib"
             case $lib in
             *.la) func_source "$func_resolve_sysroot_result" ;;
             esac
   
             # Collect preopened libtool deplibs, except any this library
             # has declared as weak libs
             for deplib in $dependency_libs; do
               func_basename "$deplib"
               deplib_base=$func_basename_result
               case " $weak_libs " in
               *" $deplib_base "*) ;;
               *) func_append deplibs " $deplib" ;;
               esac
             done
           done
           libs="$dlprefiles"
         fi
       if test "$pass" = dlopen; then        if test "$pass" = dlopen; then
         # Collect dlpreopened libraries          # Collect dlpreopened libraries
         save_deplibs="$deplibs"          save_deplibs="$deplibs"
         deplibs=          deplibs=
       fi        fi
   
       for deplib in $libs; do        for deplib in $libs; do
         lib=          lib=
         found=no          found=no
         case $deplib in          case $deplib in
        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
           if test "$linkmode,$pass" = "prog,link"; then            if test "$linkmode,$pass" = "prog,link"; then
             compile_deplibs="$deplib $compile_deplibs"              compile_deplibs="$deplib $compile_deplibs"
             finalize_deplibs="$deplib $finalize_deplibs"              finalize_deplibs="$deplib $finalize_deplibs"
           else            else
            compiler_flags="$compiler_flags $deplib"            func_append compiler_flags " $deplib"
             if test "$linkmode" = lib ; then
                 case "$new_inherited_linker_flags " in
                     *" $deplib "*) ;;
                     * ) func_append new_inherited_linker_flags " $deplib" ;;
                 esac
             fi
           fi            fi
           continue            continue
           ;;            ;;
         -l*)          -l*)
           if test "$linkmode" != lib && test "$linkmode" != prog; then            if test "$linkmode" != lib && test "$linkmode" != prog; then
            $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2            func_warning "\`-l' is ignored for archives/objects"
             continue              continue
           fi            fi
          name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`          func_stripname '-l' '' "$deplib"
          for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do          name=$func_stripname_result
           if test "$linkmode" = lib; then
             searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
           else
             searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
           fi
           for searchdir in $searchdirs; do
             for search_ext in .la $std_shrext .so .a; do              for search_ext in .la $std_shrext .so .a; do
               # Search the libtool library                # Search the libtool library
               lib="$searchdir/lib${name}${search_ext}"                lib="$searchdir/lib${name}${search_ext}"
Line 2139  EOF Line 6207  EOF
             if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
               case " $predeps $postdeps " in                case " $predeps $postdeps " in
               *" $deplib "*)                *" $deplib "*)
                if (${SED} -e '2q' $lib |                if func_lalib_p "$lib"; then
                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then 
                   library_names=                    library_names=
                   old_library=                    old_library=
                  case $lib in                  func_source "$lib"
                  */* | *\\*) . $lib ;; 
                  *) . ./$lib ;; 
                  esac 
                   for l in $old_library $library_names; do                    for l in $old_library $library_names; do
                     ll="$l"                      ll="$l"
                   done                    done
                   if test "X$ll" = "X$old_library" ; then # only static version available                    if test "X$ll" = "X$old_library" ; then # only static version available
                     found=no                      found=no
                    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`                    func_dirname "$lib" "" "."
                    test "X$ladir" = "X$lib" && ladir="."                    ladir="$func_dirname_result"
                     lib=$ladir/$old_library                      lib=$ladir/$old_library
                     if test "$linkmode,$pass" = "prog,link"; then                      if test "$linkmode,$pass" = "prog,link"; then
                       compile_deplibs="$deplib $compile_deplibs"                        compile_deplibs="$deplib $compile_deplibs"
Line 2165  EOF Line 6229  EOF
                     continue                      continue
                   fi                    fi
                 fi                  fi
                ;;                ;;
               *) ;;                *) ;;
               esac                esac
             fi              fi
           fi            fi
           ;; # -l            ;; # -l
           *.ltframework)
             if test "$linkmode,$pass" = "prog,link"; then
               compile_deplibs="$deplib $compile_deplibs"
               finalize_deplibs="$deplib $finalize_deplibs"
             else
               deplibs="$deplib $deplibs"
               if test "$linkmode" = lib ; then
                   case "$new_inherited_linker_flags " in
                       *" $deplib "*) ;;
                       * ) func_append new_inherited_linker_flags " $deplib" ;;
                   esac
               fi
             fi
             continue
             ;;
         -L*)          -L*)
           case $linkmode in            case $linkmode in
           lib)            lib)
             deplibs="$deplib $deplibs"              deplibs="$deplib $deplibs"
             test "$pass" = conv && continue              test "$pass" = conv && continue
             newdependency_libs="$deplib $newdependency_libs"              newdependency_libs="$deplib $newdependency_libs"
            newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`            func_stripname '-L' '' "$deplib"
             func_resolve_sysroot "$func_stripname_result"
             func_append newlib_search_path " $func_resolve_sysroot_result"
             ;;              ;;
           prog)            prog)
             if test "$pass" = conv; then              if test "$pass" = conv; then
Line 2190  EOF Line 6271  EOF
               compile_deplibs="$deplib $compile_deplibs"                compile_deplibs="$deplib $compile_deplibs"
               finalize_deplibs="$deplib $finalize_deplibs"                finalize_deplibs="$deplib $finalize_deplibs"
             fi              fi
            newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`            func_stripname '-L' '' "$deplib"
             func_resolve_sysroot "$func_stripname_result"
             func_append newlib_search_path " $func_resolve_sysroot_result"
             ;;              ;;
           *)            *)
            $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2            func_warning "\`-L' is ignored for archives/objects"
             ;;              ;;
           esac # linkmode            esac # linkmode
           continue            continue
           ;; # -L            ;; # -L
         -R*)          -R*)
           if test "$pass" = link; then            if test "$pass" = link; then
            dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`            func_stripname '-R' '' "$deplib"
             func_resolve_sysroot "$func_stripname_result"
             dir=$func_resolve_sysroot_result
             # Make sure the xrpath contains only unique directories.              # Make sure the xrpath contains only unique directories.
             case "$xrpath " in              case "$xrpath " in
             *" $dir "*) ;;              *" $dir "*) ;;
            *) xrpath="$xrpath $dir" ;;            *) func_append xrpath " $dir" ;;
             esac              esac
           fi            fi
           deplibs="$deplib $deplibs"            deplibs="$deplib $deplibs"
           continue            continue
           ;;            ;;
        *.la) lib="$deplib" ;;        *.la)
           func_resolve_sysroot "$deplib"
           lib=$func_resolve_sysroot_result
           ;;
         *.$libext)          *.$libext)
           if test "$pass" = conv; then            if test "$pass" = conv; then
             deplibs="$deplib $deplibs"              deplibs="$deplib $deplibs"
Line 2218  EOF Line 6306  EOF
           fi            fi
           case $linkmode in            case $linkmode in
           lib)            lib)
            valid_a_lib=no            # Linking convenience modules into shared libraries is allowed,
            case $deplibs_check_method in            # but linking other static libraries is non-portable.
              match_pattern*)            case " $dlpreconveniencelibs " in
                set dummy $deplibs_check_method            *" $deplib "*) ;;
                match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`            *)
                if eval $echo \"$deplib\" 2>/dev/null \              valid_a_lib=no
                    | $SED 10q \              case $deplibs_check_method in
                 match_pattern*)
                   set dummy $deplibs_check_method; shift
                   match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
                   if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
                     | $EGREP "$match_pattern_regex" > /dev/null; then                      | $EGREP "$match_pattern_regex" > /dev/null; then
                       valid_a_lib=yes
                     fi
                   ;;
                   pass_all)
                   valid_a_lib=yes                    valid_a_lib=yes
                 fi  
                 ;;                  ;;
              pass_all)              esac
                valid_a_lib=yes              if test "$valid_a_lib" != yes; then
                ;;                echo
            esac                $ECHO "*** Warning: Trying to link with static lib archive $deplib."
            if test "$valid_a_lib" != yes; then                echo "*** I have the capability to make that library automatically link in when"
              $echo                echo "*** you link to this library.  But I can only do this if you have a"
              $echo "*** Warning: Trying to link with static lib archive $deplib."                echo "*** shared version of the library, which you do not appear to have"
              $echo "*** I have the capability to make that library automatically link in when"                echo "*** because the file extensions .$libext of this argument makes me believe"
              $echo "*** you link to this library.  But I can only do this if you have a"                echo "*** that it is just a static archive that I should not use here."
              $echo "*** shared version of the library, which you do not appear to have"              else
              $echo "*** because the file extensions .$libext of this argument makes me believe"                echo
              $echo "*** that it is just a static archive that I should not used here."                $ECHO "*** Warning: Linking the shared library $output against the"
            else                $ECHO "*** static library $deplib is not portable!"
              $echo                deplibs="$deplib $deplibs"
              $echo "*** Warning: Linking the shared library $output against the"              fi
              $echo "*** static library $deplib is not portable!"              ;;
              deplibs="$deplib $deplibs"            esac
            fi 
             continue              continue
             ;;              ;;
           prog)            prog)
Line 2267  EOF Line 6361  EOF
             if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then              if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
               # If there is no dlopen support or we're linking statically,                # If there is no dlopen support or we're linking statically,
               # we need to preload.                # we need to preload.
              newdlprefiles="$newdlprefiles $deplib"              func_append newdlprefiles " $deplib"
               compile_deplibs="$deplib $compile_deplibs"                compile_deplibs="$deplib $compile_deplibs"
               finalize_deplibs="$deplib $finalize_deplibs"                finalize_deplibs="$deplib $finalize_deplibs"
             else              else
              newdlfiles="$newdlfiles $deplib"              func_append newdlfiles " $deplib"
             fi              fi
           fi            fi
           continue            continue
Line 2281  EOF Line 6375  EOF
           continue            continue
           ;;            ;;
         esac # case $deplib          esac # case $deplib
   
         if test "$found" = yes || test -f "$lib"; then :          if test "$found" = yes || test -f "$lib"; then :
         else          else
          $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2          func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
          exit $EXIT_FAILURE 
         fi          fi
   
         # Check to see that this really is a libtool archive.          # Check to see that this really is a libtool archive.
        if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :        func_lalib_unsafe_p "$lib" \
        else          || func_fatal_error "\`$lib' is not a valid libtool archive"
          $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 
          exit $EXIT_FAILURE 
        fi 
   
        ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`        func_dirname "$lib" "" "."
        test "X$ladir" = "X$lib" && ladir="."        ladir="$func_dirname_result"
   
         dlname=          dlname=
         dlopen=          dlopen=
Line 2303  EOF Line 6394  EOF
         libdir=          libdir=
         library_names=          library_names=
         old_library=          old_library=
           inherited_linker_flags=
         # If the library was installed with an old release of libtool,          # If the library was installed with an old release of libtool,
         # it will not redefine variables installed, or shouldnotlink          # it will not redefine variables installed, or shouldnotlink
         installed=yes          installed=yes
Line 2311  EOF Line 6403  EOF
   
   
         # Read the .la file          # Read the .la file
        case $lib in        func_source "$lib"
        */* | *\\*) . $lib ;; 
        *) . ./$lib ;; 
        esac 
   
           # Convert "-framework foo" to "foo.ltframework"
           if test -n "$inherited_linker_flags"; then
             tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
             for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
               case " $new_inherited_linker_flags " in
                 *" $tmp_inherited_linker_flag "*) ;;
                 *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
               esac
             done
           fi
           dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
         if test "$linkmode,$pass" = "lib,link" ||          if test "$linkmode,$pass" = "lib,link" ||
            test "$linkmode,$pass" = "prog,scan" ||             test "$linkmode,$pass" = "prog,scan" ||
            { test "$linkmode" != prog && test "$linkmode" != lib; }; then             { test "$linkmode" != prog && test "$linkmode" != lib; }; then
          test -n "$dlopen" && dlfiles="$dlfiles $dlopen"          test -n "$dlopen" && func_append dlfiles " $dlopen"
          test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"          test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
         fi          fi
   
         if test "$pass" = conv; then          if test "$pass" = conv; then
Line 2328  EOF Line 6428  EOF
           deplibs="$lib $deplibs"            deplibs="$lib $deplibs"
           if test -z "$libdir"; then            if test -z "$libdir"; then
             if test -z "$old_library"; then              if test -z "$old_library"; then
              $echo "$modename: cannot find name of link library for \`$lib'" 1>&2              func_fatal_error "cannot find name of link library for \`$lib'"
              exit $EXIT_FAILURE 
             fi              fi
             # It is a libtool convenience library, so add in its objects.              # It is a libtool convenience library, so add in its objects.
            convenience="$convenience $ladir/$objdir/$old_library"            func_append convenience " $ladir/$objdir/$old_library"
            old_convenience="$old_convenience $ladir/$objdir/$old_library"            func_append old_convenience " $ladir/$objdir/$old_library"
             tmp_libs=              tmp_libs=
             for deplib in $dependency_libs; do              for deplib in $dependency_libs; do
               deplibs="$deplib $deplibs"                deplibs="$deplib $deplibs"
              if test "X$duplicate_deps" = "Xyes" ; then              if $opt_preserve_dup_deps ; then
                case "$tmp_libs " in                case "$tmp_libs " in
                *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;                *" $deplib "*) func_append specialdeplibs " $deplib" ;;
                esac                esac
              fi              fi
              tmp_libs="$tmp_libs $deplib"              func_append tmp_libs " $deplib"
             done              done
           elif test "$linkmode" != prog && test "$linkmode" != lib; then            elif test "$linkmode" != prog && test "$linkmode" != lib; then
            $echo "$modename: \`$lib' is not a convenience library" 1>&2            func_fatal_error "\`$lib' is not a convenience library"
            exit $EXIT_FAILURE 
           fi            fi
           continue            continue
         fi # $pass = conv          fi # $pass = conv
Line 2354  EOF Line 6452  EOF
   
         # Get the name of the library we link against.          # Get the name of the library we link against.
         linklib=          linklib=
        for l in $old_library $library_names; do        if test -n "$old_library" &&
          linklib="$l"           { test "$prefer_static_libs" = yes ||
        done             test "$prefer_static_libs,$installed" = "built,no"; }; then
           linklib=$old_library
         else
           for l in $old_library $library_names; do
             linklib="$l"
           done
         fi
         if test -z "$linklib"; then          if test -z "$linklib"; then
          $echo "$modename: cannot find name of link library for \`$lib'" 1>&2          func_fatal_error "cannot find name of link library for \`$lib'"
          exit $EXIT_FAILURE 
         fi          fi
   
         # This library was specified with -dlopen.          # This library was specified with -dlopen.
         if test "$pass" = dlopen; then          if test "$pass" = dlopen; then
           if test -z "$libdir"; then            if test -z "$libdir"; then
            $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2            func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
            exit $EXIT_FAILURE 
           fi            fi
           if test -z "$dlname" ||            if test -z "$dlname" ||
              test "$dlopen_support" != yes ||               test "$dlopen_support" != yes ||
Line 2375  EOF Line 6477  EOF
             # statically, we need to preload.  We also need to preload any              # statically, we need to preload.  We also need to preload any
             # dependent libraries so libltdl's deplib preloader doesn't              # dependent libraries so libltdl's deplib preloader doesn't
             # bomb out in the load deplibs phase.              # bomb out in the load deplibs phase.
            dlprefiles="$dlprefiles $lib $dependency_libs"            func_append dlprefiles " $lib $dependency_libs"
           else            else
            newdlfiles="$newdlfiles $lib"            func_append newdlfiles " $lib"
           fi            fi
           continue            continue
         fi # $pass = dlopen          fi # $pass = dlopen
Line 2388  EOF Line 6490  EOF
         *)          *)
           abs_ladir=`cd "$ladir" && pwd`            abs_ladir=`cd "$ladir" && pwd`
           if test -z "$abs_ladir"; then            if test -z "$abs_ladir"; then
            $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2            func_warning "cannot determine absolute directory name of \`$ladir'"
            $echo "$modename: passing it literally to the linker, although it might fail" 1>&2            func_warning "passing it literally to the linker, although it might fail"
             abs_ladir="$ladir"              abs_ladir="$ladir"
           fi            fi
           ;;            ;;
         esac          esac
        laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`        func_basename "$lib"
         laname="$func_basename_result"
   
         # Find the relevant object directory and library name.          # Find the relevant object directory and library name.
         if test "X$installed" = Xyes; then          if test "X$installed" = Xyes; then
          if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then          if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
            $echo "$modename: warning: library \`$lib' was moved." 1>&2            func_warning "library \`$lib' was moved."
             dir="$ladir"              dir="$ladir"
             absdir="$abs_ladir"              absdir="$abs_ladir"
             libdir="$abs_ladir"              libdir="$abs_ladir"
           else            else
            dir="$libdir"            dir="$lt_sysroot$libdir"
            absdir="$libdir"            absdir="$lt_sysroot$libdir"
           fi            fi
           test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes            test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
         else          else
Line 2413  EOF Line 6516  EOF
             dir="$ladir"              dir="$ladir"
             absdir="$abs_ladir"              absdir="$abs_ladir"
             # Remove this search path later              # Remove this search path later
            notinst_path="$notinst_path $abs_ladir"            func_append notinst_path " $abs_ladir"
           else            else
             dir="$ladir/$objdir"              dir="$ladir/$objdir"
             absdir="$abs_ladir/$objdir"              absdir="$abs_ladir/$objdir"
             # Remove this search path later              # Remove this search path later
            notinst_path="$notinst_path $abs_ladir"            func_append notinst_path " $abs_ladir"
           fi            fi
         fi # $installed = yes          fi # $installed = yes
        name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`        func_stripname 'lib' '.la' "$laname"
         name=$func_stripname_result
   
         # This library was specified with -dlpreopen.          # This library was specified with -dlpreopen.
         if test "$pass" = dlpreopen; then          if test "$pass" = dlpreopen; then
          if test -z "$libdir"; then          if test -z "$libdir" && test "$linkmode" = prog; then
            $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2            func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
            exit $EXIT_FAILURE 
           fi            fi
          # Prefer using a static library (so that no silly _DYNAMIC symbols          case "$host" in
          # are required to link).            # special handling for platforms with PE-DLLs.
          if test -n "$old_library"; then            *cygwin* | *mingw* | *cegcc* )
            newdlprefiles="$newdlprefiles $dir/$old_library"              # Linker will automatically link against shared library if both
          # Otherwise, use the dlname, so that lt_dlopen finds it.              # static and shared are present.  Therefore, ensure we extract
          elif test -n "$dlname"; then              # symbols from the import library if a shared library is present
            newdlprefiles="$newdlprefiles $dir/$dlname"              # (otherwise, the dlopen module name will be incorrect).  We do
          else              # this by putting the import library name into $newdlprefiles.
            newdlprefiles="$newdlprefiles $dir/$linklib"              # We recover the dlopen module name by 'saving' the la file
          fi              # name in a special purpose variable, and (later) extracting the
               # dlname from the la file.
               if test -n "$dlname"; then
                 func_tr_sh "$dir/$linklib"
                 eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
                 func_append newdlprefiles " $dir/$linklib"
               else
                 func_append newdlprefiles " $dir/$old_library"
                 # Keep a list of preopened convenience libraries to check
                 # that they are being used correctly in the link pass.
                 test -z "$libdir" && \
                   func_append dlpreconveniencelibs " $dir/$old_library"
               fi
             ;;
             * )
               # Prefer using a static library (so that no silly _DYNAMIC symbols
               # are required to link).
               if test -n "$old_library"; then
                 func_append newdlprefiles " $dir/$old_library"
                 # Keep a list of preopened convenience libraries to check
                 # that they are being used correctly in the link pass.
                 test -z "$libdir" && \
                   func_append dlpreconveniencelibs " $dir/$old_library"
               # Otherwise, use the dlname, so that lt_dlopen finds it.
               elif test -n "$dlname"; then
                 func_append newdlprefiles " $dir/$dlname"
               else
                 func_append newdlprefiles " $dir/$linklib"
               fi
             ;;
           esac
         fi # $pass = dlpreopen          fi # $pass = dlpreopen
   
         if test -z "$libdir"; then          if test -z "$libdir"; then
Line 2456  EOF Line 6589  EOF
   
   
         if test "$linkmode" = prog && test "$pass" != link; then          if test "$linkmode" = prog && test "$pass" != link; then
          newlib_search_path="$newlib_search_path $ladir"          func_append newlib_search_path " $ladir"
           deplibs="$lib $deplibs"            deplibs="$lib $deplibs"
   
           linkalldeplibs=no            linkalldeplibs=no
Line 2468  EOF Line 6601  EOF
           tmp_libs=            tmp_libs=
           for deplib in $dependency_libs; do            for deplib in $dependency_libs; do
             case $deplib in              case $deplib in
            -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test            -L*) func_stripname '-L' '' "$deplib"
                  func_resolve_sysroot "$func_stripname_result"
                  func_append newlib_search_path " $func_resolve_sysroot_result"
                  ;;
             esac              esac
             # Need to link against all dependency_libs?              # Need to link against all dependency_libs?
             if test "$linkalldeplibs" = yes; then              if test "$linkalldeplibs" = yes; then
Line 2478  EOF Line 6614  EOF
               # or/and link against static libraries                # or/and link against static libraries
               newdependency_libs="$deplib $newdependency_libs"                newdependency_libs="$deplib $newdependency_libs"
             fi              fi
            if test "X$duplicate_deps" = "Xyes" ; then            if $opt_preserve_dup_deps ; then
               case "$tmp_libs " in                case "$tmp_libs " in
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;              *" $deplib "*) func_append specialdeplibs " $deplib" ;;
               esac                esac
             fi              fi
            tmp_libs="$tmp_libs $deplib"            func_append tmp_libs " $deplib"
           done # for deplib            done # for deplib
           continue            continue
         fi # $linkmode = prog...          fi # $linkmode = prog...
   
         if test "$linkmode,$pass" = "prog,link"; then          if test "$linkmode,$pass" = "prog,link"; then
           if test -n "$library_names" &&            if test -n "$library_names" &&
             { test "$prefer_static_libs" = no || test -z "$old_library"; }; then             { { test "$prefer_static_libs" = no ||
                  test "$prefer_static_libs,$installed" = "built,yes"; } ||
                test -z "$old_library"; }; then
             # We need to hardcode the library path              # We need to hardcode the library path
             if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then              if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
               # Make sure the rpath contains only unique directories.                # Make sure the rpath contains only unique directories.
              case "$temp_rpath " in              case "$temp_rpath:" in
              *" $dir "*) ;;              *"$absdir:"*) ;;
              *" $absdir "*) ;;              *) func_append temp_rpath "$absdir:" ;;
              *) temp_rpath="$temp_rpath $absdir" ;; 
               esac                esac
             fi              fi
   
Line 2509  EOF Line 6646  EOF
             *)              *)
               case "$compile_rpath " in                case "$compile_rpath " in
               *" $absdir "*) ;;                *" $absdir "*) ;;
              *) compile_rpath="$compile_rpath $absdir"              *) func_append compile_rpath " $absdir" ;;
               esac                esac
               ;;                ;;
             esac              esac
Line 2518  EOF Line 6655  EOF
             *)              *)
               case "$finalize_rpath " in                case "$finalize_rpath " in
               *" $libdir "*) ;;                *" $libdir "*) ;;
              *) finalize_rpath="$finalize_rpath $libdir"              *) func_append finalize_rpath " $libdir" ;;
               esac                esac
               ;;                ;;
             esac              esac
Line 2535  EOF Line 6672  EOF
   
         link_static=no # Whether the deplib will be linked statically          link_static=no # Whether the deplib will be linked statically
         use_static_libs=$prefer_static_libs          use_static_libs=$prefer_static_libs
        if test "$use_static_libs" = built && test "$installed" = yes ; then        if test "$use_static_libs" = built && test "$installed" = yes; then
           use_static_libs=no            use_static_libs=no
         fi          fi
         if test -n "$library_names" &&          if test -n "$library_names" &&
            { test "$use_static_libs" = no || test -z "$old_library"; }; then             { test "$use_static_libs" = no || test -z "$old_library"; }; then
          if test "$installed" = no; then          case $host in
            notinst_deplibs="$notinst_deplibs $lib"          *cygwin* | *mingw* | *cegcc*)
            need_relink=yes              # No point in relinking DLLs because paths are not encoded
          fi              func_append notinst_deplibs " $lib"
               need_relink=no
             ;;
           *)
             if test "$installed" = no; then
               func_append notinst_deplibs " $lib"
               need_relink=yes
             fi
             ;;
           esac
           # This is a shared library            # This is a shared library
   
          # Warn about portability, can't link against -module's on          # Warn about portability, can't link against -module's on some
          # some systems (darwin)          # systems (darwin).  Don't bleat about dlopened modules though!
          if test "$shouldnotlink" = yes && test "$pass" = link ; then          dlopenmodule=""
            $echo          for dlpremoduletest in $dlprefiles; do
             if test "X$dlpremoduletest" = "X$lib"; then
               dlopenmodule="$dlpremoduletest"
               break
             fi
           done
           if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
             echo
             if test "$linkmode" = prog; then              if test "$linkmode" = prog; then
              $echo "*** Warning: Linking the executable $output against the loadable module"              $ECHO "*** Warning: Linking the executable $output against the loadable module"
             else              else
              $echo "*** Warning: Linking the shared library $output against the loadable module"              $ECHO "*** Warning: Linking the shared library $output against the loadable module"
             fi              fi
            $echo "*** $linklib is not portable!"            $ECHO "*** $linklib is not portable!"
           fi            fi
           if test "$linkmode" = lib &&            if test "$linkmode" = lib &&
              test "$hardcode_into_libs" = yes; then               test "$hardcode_into_libs" = yes; then
Line 2567  EOF Line 6720  EOF
             *)              *)
               case "$compile_rpath " in                case "$compile_rpath " in
               *" $absdir "*) ;;                *" $absdir "*) ;;
              *) compile_rpath="$compile_rpath $absdir"              *) func_append compile_rpath " $absdir" ;;
               esac                esac
               ;;                ;;
             esac              esac
Line 2576  EOF Line 6729  EOF
             *)              *)
               case "$finalize_rpath " in                case "$finalize_rpath " in
               *" $libdir "*) ;;                *" $libdir "*) ;;
              *) finalize_rpath="$finalize_rpath $libdir"              *) func_append finalize_rpath " $libdir" ;;
               esac                esac
               ;;                ;;
             esac              esac
Line 2585  EOF Line 6738  EOF
           if test -n "$old_archive_from_expsyms_cmds"; then            if test -n "$old_archive_from_expsyms_cmds"; then
             # figure out the soname              # figure out the soname
             set dummy $library_names              set dummy $library_names
            realname="$2"            shift
            shift; shift            realname="$1"
            libname=`eval \\$echo \"$libname_spec\"`            shift
             libname=`eval "\\$ECHO \"$libname_spec\""`
             # use dlname if we got it. it's perfectly good, no?              # use dlname if we got it. it's perfectly good, no?
             if test -n "$dlname"; then              if test -n "$dlname"; then
               soname="$dlname"                soname="$dlname"
             elif test -n "$soname_spec"; then              elif test -n "$soname_spec"; then
               # bleh windows                # bleh windows
               case $host in                case $host in
              *cygwin* | mingw*)              *cygwin* | mingw* | *cegcc*)
                major=`expr $current - $age`                func_arith $current - $age
                 major=$func_arith_result
                 versuffix="-$major"                  versuffix="-$major"
                 ;;                  ;;
               esac                esac
Line 2606  EOF Line 6761  EOF
   
             # Make a new name for the extract_expsyms_cmds to use              # Make a new name for the extract_expsyms_cmds to use
             soroot="$soname"              soroot="$soname"
            soname=`$echo $soroot | ${SED} -e 's/^.*\///'`            func_basename "$soroot"
            newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"            soname="$func_basename_result"
             func_stripname 'lib' '.dll' "$soname"
             newlib=libimp-$func_stripname_result.a
   
             # If the library has no export list, then create one now              # If the library has no export list, then create one now
             if test -f "$output_objdir/$soname-def"; then :              if test -f "$output_objdir/$soname-def"; then :
             else              else
              $show "extracting exported symbol list from \`$soname'"              func_verbose "extracting exported symbol list from \`$soname'"
              save_ifs="$IFS"; IFS='~'              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
              cmds=$extract_expsyms_cmds 
              for cmd in $cmds; do 
                IFS="$save_ifs" 
                eval cmd=\"$cmd\" 
                $show "$cmd" 
                $run eval "$cmd" || exit $? 
              done 
              IFS="$save_ifs" 
             fi              fi
   
             # Create $newlib              # Create $newlib
             if test -f "$output_objdir/$newlib"; then :; else              if test -f "$output_objdir/$newlib"; then :; else
              $show "generating import library for \`$soname'"              func_verbose "generating import library for \`$soname'"
              save_ifs="$IFS"; IFS='~'              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
              cmds=$old_archive_from_expsyms_cmds 
              for cmd in $cmds; do 
                IFS="$save_ifs" 
                eval cmd=\"$cmd\" 
                $show "$cmd" 
                $run eval "$cmd" || exit $? 
              done 
              IFS="$save_ifs" 
             fi              fi
             # make sure the library variables are pointing to the new library              # make sure the library variables are pointing to the new library
             dir=$output_objdir              dir=$output_objdir
             linklib=$newlib              linklib=$newlib
           fi # test -n "$old_archive_from_expsyms_cmds"            fi # test -n "$old_archive_from_expsyms_cmds"
   
          if test "$linkmode" = prog || test "$mode" != relink; then          if test "$linkmode" = prog || test "$opt_mode" != relink; then
             add_shlibpath=              add_shlibpath=
             add_dir=              add_dir=
             add=              add=
Line 2657  EOF Line 6798  EOF
                   *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \                    *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
                     *-*-unixware7*) add_dir="-L$dir" ;;                      *-*-unixware7*) add_dir="-L$dir" ;;
                   *-*-darwin* )                    *-*-darwin* )
                    # if the lib is a module then we can not link against                    # if the lib is a (non-dlopened) module then we can not
                    # it, someone is ignoring the new warnings I added                    # link against it, someone is ignoring the earlier warnings
                     if /usr/bin/file -L $add 2> /dev/null |                      if /usr/bin/file -L $add 2> /dev/null |
                      $EGREP ": [^:]* bundle" >/dev/null ; then                         $GREP ": [^:]* bundle" >/dev/null ; then
                      $echo "** Warning, lib $linklib is a module, not a shared library"                      if test "X$dlopenmodule" != "X$lib"; then
                      if test -z "$old_library" ; then                        $ECHO "*** Warning: lib $linklib is a module, not a shared library"
                        $echo                        if test -z "$old_library" ; then
                        $echo "** And there doesn't seem to be a static archive available"                          echo
                        $echo "** The link will probably fail, sorry"                          echo "*** And there doesn't seem to be a static archive available"
                      else                          echo "*** The link will probably fail, sorry"
                        add="$dir/$old_library"                        else
                           add="$dir/$old_library"
                         fi
                       elif test -n "$old_library"; then
                         add="$dir/$old_library"
                       fi                        fi
                     fi                      fi
                 esac                  esac
Line 2685  EOF Line 6830  EOF
               fi                fi
               ;;                ;;
             relink)              relink)
              if test "$hardcode_direct" = yes; then              if test "$hardcode_direct" = yes &&
                  test "$hardcode_direct_absolute" = no; then
                 add="$dir/$linklib"                  add="$dir/$linklib"
               elif test "$hardcode_minus_L" = yes; then                elif test "$hardcode_minus_L" = yes; then
                 add_dir="-L$dir"                  add_dir="-L$dir"
Line 2693  EOF Line 6839  EOF
                 if test -n "$inst_prefix_dir"; then                  if test -n "$inst_prefix_dir"; then
                   case $libdir in                    case $libdir in
                     [\\/]*)                      [\\/]*)
                      add_dir="$add_dir -L$inst_prefix_dir$libdir"                      func_append add_dir " -L$inst_prefix_dir$libdir"
                       ;;                        ;;
                   esac                    esac
                 fi                  fi
Line 2709  EOF Line 6855  EOF
             esac              esac
   
             if test "$lib_linked" != yes; then              if test "$lib_linked" != yes; then
              $echo "$modename: configuration error: unsupported hardcode properties"              func_fatal_configuration "unsupported hardcode properties"
              exit $EXIT_FAILURE 
             fi              fi
   
             if test -n "$add_shlibpath"; then              if test -n "$add_shlibpath"; then
               case :$compile_shlibpath: in                case :$compile_shlibpath: in
               *":$add_shlibpath:"*) ;;                *":$add_shlibpath:"*) ;;
              *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;              *) func_append compile_shlibpath "$add_shlibpath:" ;;
               esac                esac
             fi              fi
             if test "$linkmode" = prog; then              if test "$linkmode" = prog; then
Line 2725  EOF Line 6870  EOF
             else              else
               test -n "$add_dir" && deplibs="$add_dir $deplibs"                test -n "$add_dir" && deplibs="$add_dir $deplibs"
               test -n "$add" && deplibs="$add $deplibs"                test -n "$add" && deplibs="$add $deplibs"
              if test "$hardcode_direct" != yes && \              if test "$hardcode_direct" != yes &&
                 test "$hardcode_minus_L" != yes && \                 test "$hardcode_minus_L" != yes &&
                  test "$hardcode_shlibpath_var" = yes; then                   test "$hardcode_shlibpath_var" = yes; then
                 case :$finalize_shlibpath: in                  case :$finalize_shlibpath: in
                 *":$libdir:"*) ;;                  *":$libdir:"*) ;;
                *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;                *) func_append finalize_shlibpath "$libdir:" ;;
                 esac                  esac
               fi                fi
             fi              fi
           fi            fi
   
          if test "$linkmode" = prog || test "$mode" = relink; then          if test "$linkmode" = prog || test "$opt_mode" = relink; then
             add_shlibpath=              add_shlibpath=
             add_dir=              add_dir=
             add=              add=
             # Finalize command for both is simple: just hardcode it.              # Finalize command for both is simple: just hardcode it.
            if test "$hardcode_direct" = yes; then            if test "$hardcode_direct" = yes &&
                test "$hardcode_direct_absolute" = no; then
               add="$libdir/$linklib"                add="$libdir/$linklib"
             elif test "$hardcode_minus_L" = yes; then              elif test "$hardcode_minus_L" = yes; then
               add_dir="-L$libdir"                add_dir="-L$libdir"
Line 2749  EOF Line 6895  EOF
             elif test "$hardcode_shlibpath_var" = yes; then              elif test "$hardcode_shlibpath_var" = yes; then
               case :$finalize_shlibpath: in                case :$finalize_shlibpath: in
               *":$libdir:"*) ;;                *":$libdir:"*) ;;
              *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;              *) func_append finalize_shlibpath "$libdir:" ;;
               esac                esac
               add="-l$name"                add="-l$name"
             elif test "$hardcode_automatic" = yes; then              elif test "$hardcode_automatic" = yes; then
               if test -n "$inst_prefix_dir" &&                if test -n "$inst_prefix_dir" &&
                  test -f "$inst_prefix_dir$libdir/$linklib" ; then                   test -f "$inst_prefix_dir$libdir/$linklib" ; then
                add="$inst_prefix_dir$libdir/$linklib"                add="$inst_prefix_dir$libdir/$linklib"
               else                else
                add="$libdir/$linklib"                add="$libdir/$linklib"
               fi                fi
             else              else
               # We cannot seem to hardcode it, guess we'll fake it.                # We cannot seem to hardcode it, guess we'll fake it.
Line 2766  EOF Line 6912  EOF
               if test -n "$inst_prefix_dir"; then                if test -n "$inst_prefix_dir"; then
                 case $libdir in                  case $libdir in
                   [\\/]*)                    [\\/]*)
                    add_dir="$add_dir -L$inst_prefix_dir$libdir"                    func_append add_dir " -L$inst_prefix_dir$libdir"
                     ;;                      ;;
                 esac                  esac
               fi                fi
Line 2801  EOF Line 6947  EOF
   
             # Just print a warning and add the library to dependency_libs so              # Just print a warning and add the library to dependency_libs so
             # that the program can be linked against the static library.              # that the program can be linked against the static library.
            $echo            echo
            $echo "*** Warning: This system can not link to static lib archive $lib."            $ECHO "*** Warning: This system can not link to static lib archive $lib."
            $echo "*** I have the capability to make that library automatically link in when"            echo "*** I have the capability to make that library automatically link in when"
            $echo "*** you link to this library.  But I can only do this if you have a"            echo "*** you link to this library.  But I can only do this if you have a"
            $echo "*** shared version of the library, which you do not appear to have."            echo "*** shared version of the library, which you do not appear to have."
             if test "$module" = yes; then              if test "$module" = yes; then
              $echo "*** But as you try to build a module library, libtool will still create "              echo "*** But as you try to build a module library, libtool will still create "
              $echo "*** a static module, that should work as long as the dlopening application"              echo "*** a static module, that should work as long as the dlopening application"
              $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."              echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
               if test -z "$global_symbol_pipe"; then                if test -z "$global_symbol_pipe"; then
                $echo                echo
                $echo "*** However, this would only work if libtool was able to extract symbol"                echo "*** However, this would only work if libtool was able to extract symbol"
                $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"                echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
                $echo "*** not find such a program.  So, this module is probably useless."                echo "*** not find such a program.  So, this module is probably useless."
                $echo "*** \`nm' from GNU binutils and a full rebuild may help."                echo "*** \`nm' from GNU binutils and a full rebuild may help."
               fi                fi
               if test "$build_old_libs" = no; then                if test "$build_old_libs" = no; then
                 build_libtool_libs=module                  build_libtool_libs=module
Line 2839  EOF Line 6985  EOF
             temp_deplibs=              temp_deplibs=
             for libdir in $dependency_libs; do              for libdir in $dependency_libs; do
               case $libdir in                case $libdir in
              -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`              -R*) func_stripname '-R' '' "$libdir"
                    temp_xrpath=$func_stripname_result
                    case " $xrpath " in                     case " $xrpath " in
                    *" $temp_xrpath "*) ;;                     *" $temp_xrpath "*) ;;
                   *) xrpath="$xrpath $temp_xrpath";;                   *) func_append xrpath " $temp_xrpath";;
                    esac;;                     esac;;
              *) temp_deplibs="$temp_deplibs $libdir";;              *) func_append temp_deplibs " $libdir";;
               esac                esac
             done              done
             dependency_libs="$temp_deplibs"              dependency_libs="$temp_deplibs"
           fi            fi
   
          newlib_search_path="$newlib_search_path $absdir"          func_append newlib_search_path " $absdir"
           # Link against this library            # Link against this library
           test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"            test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
           # ... and its dependency_libs            # ... and its dependency_libs
           tmp_libs=            tmp_libs=
           for deplib in $dependency_libs; do            for deplib in $dependency_libs; do
             newdependency_libs="$deplib $newdependency_libs"              newdependency_libs="$deplib $newdependency_libs"
            if test "X$duplicate_deps" = "Xyes" ; then            case $deplib in
               -L*) func_stripname '-L' '' "$deplib"
                    func_resolve_sysroot "$func_stripname_result";;
               *) func_resolve_sysroot "$deplib" ;;
             esac
             if $opt_preserve_dup_deps ; then
               case "$tmp_libs " in                case "$tmp_libs " in
              *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;              *" $func_resolve_sysroot_result "*)
                 func_append specialdeplibs " $func_resolve_sysroot_result" ;;
               esac                esac
             fi              fi
            tmp_libs="$tmp_libs $deplib"            func_append tmp_libs " $func_resolve_sysroot_result"
           done            done
   
           if test "$link_all_deplibs" != no; then            if test "$link_all_deplibs" != no; then
             # Add the search paths of all dependency libraries              # Add the search paths of all dependency libraries
             for deplib in $dependency_libs; do              for deplib in $dependency_libs; do
                 path=
               case $deplib in                case $deplib in
               -L*) path="$deplib" ;;                -L*) path="$deplib" ;;
               *.la)                *.la)
                dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`                func_resolve_sysroot "$deplib"
                test "X$dir" = "X$deplib" && dir="."                deplib=$func_resolve_sysroot_result
                 func_dirname "$deplib" "" "."
                 dir=$func_dirname_result
                 # We need an absolute path.                  # We need an absolute path.
                 case $dir in                  case $dir in
                 [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;                  [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
                 *)                  *)
                   absdir=`cd "$dir" && pwd`                    absdir=`cd "$dir" && pwd`
                   if test -z "$absdir"; then                    if test -z "$absdir"; then
                    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2                    func_warning "cannot determine absolute directory name of \`$dir'"
                     absdir="$dir"                      absdir="$dir"
                   fi                    fi
                   ;;                    ;;
                 esac                  esac
                if grep "^installed=no" $deplib > /dev/null; then                if $GREP "^installed=no" $deplib > /dev/null; then
                  path="$absdir/$objdir" 
                else 
                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` 
                  if test -z "$libdir"; then 
                    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 
                    exit $EXIT_FAILURE 
                  fi 
                  if test "$absdir" != "$libdir"; then 
                    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 
                  fi 
                  path="$absdir" 
                fi 
                depdepl= 
                 case $host in                  case $host in
                 *-*-darwin*)                  *-*-darwin*)
                  # we do not want to link against static libs,                  depdepl=
                  # but need to link against shared 
                   eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`                    eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
                   if test -n "$deplibrary_names" ; then                    if test -n "$deplibrary_names" ; then
                     for tmp in $deplibrary_names ; do                      for tmp in $deplibrary_names ; do
                       depdepl=$tmp                        depdepl=$tmp
                     done                      done
                    if test -f "$path/$depdepl" ; then                    if test -f "$absdir/$objdir/$depdepl" ; then
                      depdepl="$path/$depdepl"                      depdepl="$absdir/$objdir/$depdepl"
                       darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                       if test -z "$darwin_install_name"; then
                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
                       func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
                       func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
                       path=
                     fi                      fi
                     # do not add paths which are already there  
                     case " $newlib_search_path " in  
                     *" $path "*) ;;  
                     *) newlib_search_path="$newlib_search_path $path";;  
                     esac  
                   fi                    fi
                   path=""  
                   ;;                    ;;
                 *)                  *)
                  path="-L$path"                  path="-L$absdir/$objdir"
                   ;;                    ;;
                 esac                  esac
                   else
                     eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                     test -z "$libdir" && \
                       func_fatal_error "\`$deplib' is not a valid libtool archive"
                     test "$absdir" != "$libdir" && \
                       func_warning "\`$deplib' seems to be moved"
   
                     path="-L$absdir"
                   fi
                 ;;                  ;;
               -l*)  
                 case $host in  
                 *-*-darwin*)  
                   # Again, we only want to link against shared libraries  
                   eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`  
                   for tmp in $newlib_search_path ; do  
                     if test -f "$tmp/lib$tmp_libs.dylib" ; then  
                       eval depdepl="$tmp/lib$tmp_libs.dylib"  
                       break  
                     fi  
                   done  
                   path=""  
                   ;;  
                 *) continue ;;  
                 esac  
                 ;;  
               *) continue ;;  
               esac                esac
               case " $deplibs " in                case " $deplibs " in
               *" $path "*) ;;                *" $path "*) ;;
               *) deplibs="$path $deplibs" ;;                *) deplibs="$path $deplibs" ;;
               esac                esac
               case " $deplibs " in  
               *" $depdepl "*) ;;  
               *) deplibs="$depdepl $deplibs" ;;  
               esac  
             done              done
           fi # link_all_deplibs != no            fi # link_all_deplibs != no
         fi # linkmode = lib          fi # linkmode = lib
       done # for deplib in $libs        done # for deplib in $libs
         if test "$pass" = link; then
           if test "$linkmode" = "prog"; then
             compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
             finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
           else
             compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
           fi
         fi
       dependency_libs="$newdependency_libs"        dependency_libs="$newdependency_libs"
       if test "$pass" = dlpreopen; then        if test "$pass" = dlpreopen; then
         # Link the dlpreopened libraries before other libraries          # Link the dlpreopened libraries before other libraries
Line 2967  EOF Line 7106  EOF
           for dir in $newlib_search_path; do            for dir in $newlib_search_path; do
             case "$lib_search_path " in              case "$lib_search_path " in
             *" $dir "*) ;;              *" $dir "*) ;;
            *) lib_search_path="$lib_search_path $dir" ;;            *) func_append lib_search_path " $dir" ;;
             esac              esac
           done            done
           newlib_search_path=            newlib_search_path=
Line 3025  EOF Line 7164  EOF
             -L*)              -L*)
               case " $tmp_libs " in                case " $tmp_libs " in
               *" $deplib "*) ;;                *" $deplib "*) ;;
              *) tmp_libs="$tmp_libs $deplib" ;;              *) func_append tmp_libs " $deplib" ;;
               esac                esac
               ;;                ;;
            *) tmp_libs="$tmp_libs $deplib" ;;            *) func_append tmp_libs " $deplib" ;;
             esac              esac
           done            done
           eval $var=\"$tmp_libs\"            eval $var=\"$tmp_libs\"
Line 3044  EOF Line 7183  EOF
           ;;            ;;
         esac          esac
         if test -n "$i" ; then          if test -n "$i" ; then
          tmp_libs="$tmp_libs $i"          func_append tmp_libs " $i"
         fi          fi
       done        done
       dependency_libs=$tmp_libs        dependency_libs=$tmp_libs
     done # for pass      done # for pass
     if test "$linkmode" = prog; then      if test "$linkmode" = prog; then
       dlfiles="$newdlfiles"        dlfiles="$newdlfiles"
       fi
       if test "$linkmode" = prog || test "$linkmode" = lib; then
       dlprefiles="$newdlprefiles"        dlprefiles="$newdlprefiles"
     fi      fi
   
     case $linkmode in      case $linkmode in
     oldlib)      oldlib)
       if test -n "$deplibs"; then  
         $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2  
       fi  
   
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then        if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2        func_warning "\`-dlopen' is ignored for archives"
       fi        fi
   
      if test -n "$rpath"; then      case " $deplibs" in
        $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2      *\ -l* | *\ -L*)
      fi        func_warning "\`-l' and \`-L' are ignored for archives" ;;
       esac
   
      if test -n "$xrpath"; then      test -n "$rpath" && \
        $echo "$modename: warning: \`-R' is ignored for archives" 1>&2        func_warning "\`-rpath' is ignored for archives"
      fi 
   
      if test -n "$vinfo"; then      test -n "$xrpath" && \
        $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2        func_warning "\`-R' is ignored for archives"
      fi 
   
      if test -n "$release"; then      test -n "$vinfo" && \
        $echo "$modename: warning: \`-release' is ignored for archives" 1>&2        func_warning "\`-version-info/-version-number' is ignored for archives"
      fi 
   
      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then      test -n "$release" && \
        $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2        func_warning "\`-release' is ignored for archives"
      fi 
   
         test -n "$export_symbols$export_symbols_regex" && \
           func_warning "\`-export-symbols' is ignored for archives"
   
       # Now set the variables for building old libraries.        # Now set the variables for building old libraries.
       build_libtool_libs=no        build_libtool_libs=no
       oldlibs="$output"        oldlibs="$output"
      objs="$objs$old_deplibs"      func_append objs "$old_deplibs"
       ;;        ;;
   
     lib)      lib)
       # Make sure we only generate libraries of the form `libNAME.la'.        # Make sure we only generate libraries of the form `libNAME.la'.
       case $outputname in        case $outputname in
       lib*)        lib*)
        name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`        func_stripname 'lib' '.la' "$outputname"
         name=$func_stripname_result
         eval shared_ext=\"$shrext_cmds\"          eval shared_ext=\"$shrext_cmds\"
         eval libname=\"$libname_spec\"          eval libname=\"$libname_spec\"
         ;;          ;;
       *)        *)
        if test "$module" = no; then        test "$module" = no && \
          $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2          func_fatal_help "libtool library \`$output' must begin with \`lib'"
          $echo "$help" 1>&2
          exit $EXIT_FAILURE 
        fi 
         if test "$need_lib_prefix" != no; then          if test "$need_lib_prefix" != no; then
           # Add the "lib" prefix for modules if required            # Add the "lib" prefix for modules if required
          name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`          func_stripname '' '.la' "$outputname"
           name=$func_stripname_result
           eval shared_ext=\"$shrext_cmds\"            eval shared_ext=\"$shrext_cmds\"
           eval libname=\"$libname_spec\"            eval libname=\"$libname_spec\"
         else          else
          libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`          func_stripname '' '.la' "$outputname"
           libname=$func_stripname_result
         fi          fi
         ;;          ;;
       esac        esac
   
       if test -n "$objs"; then        if test -n "$objs"; then
         if test "$deplibs_check_method" != pass_all; then          if test "$deplibs_check_method" != pass_all; then
          $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1          func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
          exit $EXIT_FAILURE 
         else          else
          $echo          echo
          $echo "*** Warning: Linking the shared library $output against the non-libtool"          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
          $echo "*** objects $objs is not portable!"          $ECHO "*** objects $objs is not portable!"
          libobjs="$libobjs $objs"          func_append libobjs " $objs"
         fi          fi
       fi        fi
   
      if test "$dlself" != no; then      test "$dlself" != no && \
        $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2        func_warning "\`-dlopen self' is ignored for libtool libraries"
      fi 
   
       set dummy $rpath        set dummy $rpath
      if test "$#" -gt 2; then      shift
        $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2      test "$#" -gt 1 && \
      fi        func_warning "ignoring multiple \`-rpath's for a libtool library"
      install_libdir="$2" 
   
         install_libdir="$1"
   
       oldlibs=        oldlibs=
       if test -z "$rpath"; then        if test -z "$rpath"; then
         if test "$build_libtool_libs" = yes; then          if test "$build_libtool_libs" = yes; then
Line 3149  EOF Line 7286  EOF
           build_old_libs=yes            build_old_libs=yes
         fi          fi
   
        if test -n "$vinfo"; then        test -n "$vinfo" && \
          $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2          func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
        fi 
   
        if test -n "$release"; then        test -n "$release" && \
          $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2          func_warning "\`-release' is ignored for convenience libraries"
        fi 
       else        else
   
         # Parse the version information argument.          # Parse the version information argument.
         save_ifs="$IFS"; IFS=':'          save_ifs="$IFS"; IFS=':'
         set dummy $vinfo 0 0 0          set dummy $vinfo 0 0 0
           shift
         IFS="$save_ifs"          IFS="$save_ifs"
   
        if test -n "$8"; then        test -n "$7" && \
          $echo "$modename: too many parameters to \`-version-info'" 1>&2          func_fatal_help "too many parameters to \`-version-info'"
          $echo "$help" 1>&2 
          exit $EXIT_FAILURE 
        fi 
   
         # convert absolute version numbers to libtool ages          # convert absolute version numbers to libtool ages
         # this retains compatibility with .la files and attempts          # this retains compatibility with .la files and attempts
Line 3175  EOF Line 7308  EOF
   
         case $vinfo_number in          case $vinfo_number in
         yes)          yes)
          number_major="$2"          number_major="$1"
          number_minor="$3"          number_minor="$2"
          number_revision="$4"          number_revision="$3"
           #            #
           # There are really only two kinds -- those that            # There are really only two kinds -- those that
           # use the current revision as the major version            # use the current revision as the major version
Line 3186  EOF Line 7319  EOF
           # which has an extra 1 added just for fun            # which has an extra 1 added just for fun
           #            #
           case $version_type in            case $version_type in
          darwin|linux|osf|windows)          darwin|linux|osf|windows|none)
            current=`expr $number_major + $number_minor`            func_arith $number_major + $number_minor
             current=$func_arith_result
             age="$number_minor"              age="$number_minor"
             revision="$number_revision"              revision="$number_revision"
             ;;              ;;
          freebsd-aout|freebsd-elf|sunos)          freebsd-aout|freebsd-elf|qnx|sunos)
             current="$number_major"              current="$number_major"
             revision="$number_minor"              revision="$number_minor"
             age="0"              age="0"
             ;;              ;;
           irix|nonstopux)            irix|nonstopux)
            current=`expr $number_major + $number_minor - 1`            func_arith $number_major + $number_minor
             current=$func_arith_result
             age="$number_minor"              age="$number_minor"
             revision="$number_minor"              revision="$number_minor"
               lt_irix_increment=no
             ;;              ;;
             *)
               func_fatal_configuration "$modename: unknown library version type \`$version_type'"
               ;;
           esac            esac
           ;;            ;;
         no)          no)
          current="$2"          current="$1"
          revision="$3"          revision="$2"
          age="$4"          age="$3"
           ;;            ;;
         esac          esac
   
Line 3214  EOF Line 7353  EOF
         case $current in          case $current in
         0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;          0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
         *)          *)
          $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2          func_error "CURRENT \`$current' must be a nonnegative integer"
          $echo "$modename: \`$vinfo' is not valid version information" 1>&2          func_fatal_error "\`$vinfo' is not valid version information"
          exit $EXIT_FAILURE 
           ;;            ;;
         esac          esac
   
         case $revision in          case $revision in
         0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;          0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
         *)          *)
          $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2          func_error "REVISION \`$revision' must be a nonnegative integer"
          $echo "$modename: \`$vinfo' is not valid version information" 1>&2          func_fatal_error "\`$vinfo' is not valid version information"
          exit $EXIT_FAILURE 
           ;;            ;;
         esac          esac
   
         case $age in          case $age in
         0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;          0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
         *)          *)
          $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2          func_error "AGE \`$age' must be a nonnegative integer"
          $echo "$modename: \`$vinfo' is not valid version information" 1>&2          func_fatal_error "\`$vinfo' is not valid version information"
          exit $EXIT_FAILURE 
           ;;            ;;
         esac          esac
   
         if test "$age" -gt "$current"; then          if test "$age" -gt "$current"; then
          $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2          func_error "AGE \`$age' is greater than the current interface number \`$current'"
          $echo "$modename: \`$vinfo' is not valid version information" 1>&2          func_fatal_error "\`$vinfo' is not valid version information"
          exit $EXIT_FAILURE 
         fi          fi
   
         # Calculate the version variables.          # Calculate the version variables.
Line 3254  EOF Line 7389  EOF
         darwin)          darwin)
           # Like Linux, but with the current version available in            # Like Linux, but with the current version available in
           # verstring for coding it into the library header            # verstring for coding it into the library header
          major=.`expr $current - $age`          func_arith $current - $age
           major=.$func_arith_result
           versuffix="$major.$age.$revision"            versuffix="$major.$age.$revision"
           # Darwin ld doesn't like 0 for these options...            # Darwin ld doesn't like 0 for these options...
          minor_current=`expr $current + 1`          func_arith $current + 1
          verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"          minor_current=$func_arith_result
           xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
           verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
           ;;            ;;
   
         freebsd-aout)          freebsd-aout)
Line 3268  EOF Line 7406  EOF
   
         freebsd-elf)          freebsd-elf)
           major=".$current"            major=".$current"
          versuffix=".$current";          versuffix=".$current"
           ;;            ;;
   
         irix | nonstopux)          irix | nonstopux)
          major=`expr $current - $age + 1`          if test "X$lt_irix_increment" = "Xno"; then
             func_arith $current - $age
           else
             func_arith $current - $age + 1
           fi
           major=$func_arith_result
   
           case $version_type in            case $version_type in
             nonstopux) verstring_prefix=nonstopux ;;              nonstopux) verstring_prefix=nonstopux ;;
Line 3283  EOF Line 7426  EOF
           # Add in all the interfaces that we are compatible with.            # Add in all the interfaces that we are compatible with.
           loop=$revision            loop=$revision
           while test "$loop" -ne 0; do            while test "$loop" -ne 0; do
            iface=`expr $revision - $loop`            func_arith $revision - $loop
            loop=`expr $loop - 1`            iface=$func_arith_result
             func_arith $loop - 1
             loop=$func_arith_result
             verstring="$verstring_prefix$major.$iface:$verstring"              verstring="$verstring_prefix$major.$iface:$verstring"
           done            done
   
Line 3294  EOF Line 7439  EOF
           ;;            ;;
   
         linux)          linux)
          major=.`expr $current - $age`          func_arith $current - $age
           major=.$func_arith_result
           versuffix="$major.$age.$revision"            versuffix="$major.$age.$revision"
           ;;            ;;
   
         osf)          osf)
          major=.`expr $current - $age`          func_arith $current - $age
           major=.$func_arith_result
           versuffix=".$current.$age.$revision"            versuffix=".$current.$age.$revision"
           verstring="$current.$age.$revision"            verstring="$current.$age.$revision"
   
           # Add in all the interfaces that we are compatible with.            # Add in all the interfaces that we are compatible with.
           loop=$age            loop=$age
           while test "$loop" -ne 0; do            while test "$loop" -ne 0; do
            iface=`expr $current - $loop`            func_arith $current - $loop
            loop=`expr $loop - 1`            iface=$func_arith_result
             func_arith $loop - 1
             loop=$func_arith_result
             verstring="$verstring:${iface}.0"              verstring="$verstring:${iface}.0"
           done            done
   
           # Make executables depend on our current version.            # Make executables depend on our current version.
          verstring="$verstring:${current}.0"          func_append verstring ":${current}.0"
           ;;            ;;
   
           qnx)
             major=".$current"
             versuffix=".$current"
             ;;
   
         sunos)          sunos)
           major=".$current"            major=".$current"
           versuffix=".$current.$revision"            versuffix=".$current.$revision"
Line 3323  EOF Line 7477  EOF
         windows)          windows)
           # Use '-' rather than '.', since we only want one            # Use '-' rather than '.', since we only want one
           # extension on DOS 8.3 filesystems.            # extension on DOS 8.3 filesystems.
          major=`expr $current - $age`          func_arith $current - $age
           major=$func_arith_result
           versuffix="-$major"            versuffix="-$major"
           ;;            ;;
   
         *)          *)
          $echo "$modename: unknown library version type \`$version_type'" 1>&2          func_fatal_configuration "unknown library version type \`$version_type'"
          $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2 
          exit $EXIT_FAILURE 
           ;;            ;;
         esac          esac
   
Line 3364  EOF Line 7517  EOF
         # Check to see if the archive will have undefined symbols.          # Check to see if the archive will have undefined symbols.
         if test "$allow_undefined" = yes; then          if test "$allow_undefined" = yes; then
           if test "$allow_undefined_flag" = unsupported; then            if test "$allow_undefined_flag" = unsupported; then
            $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2            func_warning "undefined symbols not allowed in $host shared libraries"
             build_libtool_libs=no              build_libtool_libs=no
             build_old_libs=yes              build_old_libs=yes
           fi            fi
Line 3372  EOF Line 7525  EOF
           # Don't allow undefined symbols.            # Don't allow undefined symbols.
           allow_undefined_flag="$no_undefined_flag"            allow_undefined_flag="$no_undefined_flag"
         fi          fi
   
       fi        fi
   
      if test "$mode" != relink; then      func_generate_dlsyms "$libname" "$libname" "yes"
       func_append libobjs " $symfileobj"
       test "X$libobjs" = "X " && libobjs=
 
       if test "$opt_mode" != relink; then
         # Remove our outputs, but don't remove object files since they          # Remove our outputs, but don't remove object files since they
         # may have been created when compiling PIC objects.          # may have been created when compiling PIC objects.
         removelist=          removelist=
        tempremovelist=`$echo "$output_objdir/*"`        tempremovelist=`$ECHO "$output_objdir/*"`
         for p in $tempremovelist; do          for p in $tempremovelist; do
           case $p in            case $p in
            *.$objext)            *.$objext | *.gcno)
                ;;                 ;;
             $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)              $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
                if test "X$precious_files_regex" != "X"; then                 if test "X$precious_files_regex" != "X"; then
                 if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
                 then                 then
                    continue                     continue
                  fi                   fi
                fi                 fi
               removelist="$removelist $p"               func_append removelist " $p"
                ;;                 ;;
             *) ;;              *) ;;
           esac            esac
         done          done
        if test -n "$removelist"; then        test -n "$removelist" && \
          $show "${rm}r $removelist"          func_show_eval "${RM}r \$removelist"
          $run ${rm}r $removelist 
        fi 
       fi        fi
   
       # Now set the variables for building old libraries.        # Now set the variables for building old libraries.
       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then        if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
        oldlibs="$oldlibs $output_objdir/$libname.$libext"        func_append oldlibs " $output_objdir/$libname.$libext"
   
         # Transform .lo files to .o files.          # Transform .lo files to .o files.
        oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`        oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
       fi        fi
   
       # Eliminate all temporary directories.        # Eliminate all temporary directories.
      for path in $notinst_path; do      #for path in $notinst_path; do
        lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`      #        lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
        deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`      #        deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
        dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`      #        dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
      done      #done
   
       if test -n "$xrpath"; then        if test -n "$xrpath"; then
         # If the user specified any rpath flags, then add them.          # If the user specified any rpath flags, then add them.
         temp_xrpath=          temp_xrpath=
         for libdir in $xrpath; do          for libdir in $xrpath; do
          temp_xrpath="$temp_xrpath -R$libdir"          func_replace_sysroot "$libdir"
           func_append temp_xrpath " -R$func_replace_sysroot_result"
           case "$finalize_rpath " in            case "$finalize_rpath " in
           *" $libdir "*) ;;            *" $libdir "*) ;;
          *) finalize_rpath="$finalize_rpath $libdir" ;;          *) func_append finalize_rpath " $libdir" ;;
           esac            esac
         done          done
         if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then          if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
Line 3437  EOF Line 7594  EOF
       for lib in $old_dlfiles; do        for lib in $old_dlfiles; do
         case " $dlprefiles $dlfiles " in          case " $dlprefiles $dlfiles " in
         *" $lib "*) ;;          *" $lib "*) ;;
        *) dlfiles="$dlfiles $lib" ;;        *) func_append dlfiles " $lib" ;;
         esac          esac
       done        done
   
Line 3447  EOF Line 7604  EOF
       for lib in $old_dlprefiles; do        for lib in $old_dlprefiles; do
         case "$dlprefiles " in          case "$dlprefiles " in
         *" $lib "*) ;;          *" $lib "*) ;;
        *) dlprefiles="$dlprefiles $lib" ;;        *) func_append dlprefiles " $lib" ;;
         esac          esac
       done        done
   
       if test "$build_libtool_libs" = yes; then        if test "$build_libtool_libs" = yes; then
         if test -n "$rpath"; then          if test -n "$rpath"; then
           case $host in            case $host in
          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
             # these systems don't actually have a c library (as such)!              # these systems don't actually have a c library (as such)!
             ;;              ;;
           *-*-rhapsody* | *-*-darwin1.[012])            *-*-rhapsody* | *-*-darwin1.[012])
             # Rhapsody C library is in the System framework              # Rhapsody C library is in the System framework
            deplibs="$deplibs -framework System"            func_append deplibs " System.ltframework"
             ;;              ;;
           *-*-netbsd*)            *-*-netbsd*)
             # Don't link with libc until the a.out ld.so is fixed.              # Don't link with libc until the a.out ld.so is fixed.
Line 3473  EOF Line 7630  EOF
           *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)            *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
             # Compiler inserts libc in the correct place for threads to work              # Compiler inserts libc in the correct place for threads to work
             ;;              ;;
          *)          *)
             # Add libc to deplibs on all other systems if necessary.              # Add libc to deplibs on all other systems if necessary.
             if test "$build_libtool_need_lc" = "yes"; then              if test "$build_libtool_need_lc" = "yes"; then
              deplibs="$deplibs -lc"              func_append deplibs " -lc"
             fi              fi
             ;;              ;;
           esac            esac
Line 3510  EOF Line 7667  EOF
           # limits. Maybe even breaks it.  We compile a program, linking it            # limits. Maybe even breaks it.  We compile a program, linking it
           # against the deplibs as a proxy for the library.  Then we can check            # against the deplibs as a proxy for the library.  Then we can check
           # whether they linked in statically or dynamically with ldd.            # whether they linked in statically or dynamically with ldd.
          $rm conftest.c          $opt_dry_run || $RM conftest.c
           cat > conftest.c <<EOF            cat > conftest.c <<EOF
           int main() { return 0; }            int main() { return 0; }
 EOF  EOF
          $rm conftest          $opt_dry_run || $RM conftest
          $LTCC $LTCFLAGS -o conftest conftest.c $deplibs          if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
          if test "$?" -eq 0 ; then 
             ldd_output=`ldd conftest`              ldd_output=`ldd conftest`
             for i in $deplibs; do              for i in $deplibs; do
              name=`expr $i : '-l\(.*\)'`              case $i in
              # If $name is empty we are operating on a -L argument.              -l*)
              if test "$name" != "" && test "$name" -ne "0"; then                func_stripname -l '' "$i"
                 name=$func_stripname_result
                 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                   case " $predeps $postdeps " in                    case " $predeps $postdeps " in
                   *" $i "*)                    *" $i "*)
                    newdeplibs="$newdeplibs $i"                    func_append newdeplibs " $i"
                     i=""                      i=""
                     ;;                      ;;
                   esac                    esac
                fi                fi
                 if test -n "$i" ; then                  if test -n "$i" ; then
                  libname=`eval \\$echo \"$libname_spec\"`                  libname=`eval "\\$ECHO \"$libname_spec\""`
                  deplib_matches=`eval \\$echo \"$library_names_spec\"`                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                  set dummy $deplib_matches                  set dummy $deplib_matches; shift
                  deplib_match=$2                  deplib_match=$1
                   if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                    newdeplibs="$newdeplibs $i"                    func_append newdeplibs " $i"
                   else                    else
                     droppeddeps=yes                      droppeddeps=yes
                    $echo                    echo
                    $echo "*** Warning: dynamic linker does not accept needed library $i."                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
                    $echo "*** I have the capability to make that library automatically link in when"                    echo "*** I have the capability to make that library automatically link in when"
                    $echo "*** you link to this library.  But I can only do this if you have a"                    echo "*** you link to this library.  But I can only do this if you have a"
                    $echo "*** shared version of the library, which I believe you do not have"                    echo "*** shared version of the library, which I believe you do not have"
                    $echo "*** because a test_compile did reveal that the linker did not use it for"                    echo "*** because a test_compile did reveal that the linker did not use it for"
                    $echo "*** its dynamic dependency list that programs get resolved with at runtime."                    echo "*** its dynamic dependency list that programs get resolved with at runtime."
                   fi                    fi
                 fi                  fi
              else                ;;
                newdeplibs="$newdeplibs $i"              *)
              fi                func_append newdeplibs " $i"
                 ;;
               esac
             done              done
           else            else
             # Error occurred in the first compile.  Let's try to salvage              # Error occurred in the first compile.  Let's try to salvage
             # the situation: Compile a separate program for each library.              # the situation: Compile a separate program for each library.
             for i in $deplibs; do              for i in $deplibs; do
              name=`expr $i : '-l\(.*\)'`              case $i in
              # If $name is empty we are operating on a -L argument.              -l*)
              if test "$name" != "" && test "$name" != "0"; then                func_stripname -l '' "$i"
                $rm conftest                name=$func_stripname_result
                $LTCC $LTCFLAGS -o conftest conftest.c $i                $opt_dry_run || $RM conftest
                # Did it work?                if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
                if test "$?" -eq 0 ; then 
                   ldd_output=`ldd conftest`                    ldd_output=`ldd conftest`
                   if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then                    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                     case " $predeps $postdeps " in                      case " $predeps $postdeps " in
                     *" $i "*)                      *" $i "*)
                      newdeplibs="$newdeplibs $i"                      func_append newdeplibs " $i"
                       i=""                        i=""
                       ;;                        ;;
                     esac                      esac
                   fi                    fi
                   if test -n "$i" ; then                    if test -n "$i" ; then
                    libname=`eval \\$echo \"$libname_spec\"`                    libname=`eval "\\$ECHO \"$libname_spec\""`
                    deplib_matches=`eval \\$echo \"$library_names_spec\"`                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                    set dummy $deplib_matches                    set dummy $deplib_matches; shift
                    deplib_match=$2                    deplib_match=$1
                     if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then                      if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
                      newdeplibs="$newdeplibs $i"                      func_append newdeplibs " $i"
                     else                      else
                       droppeddeps=yes                        droppeddeps=yes
                      $echo                      echo
                      $echo "*** Warning: dynamic linker does not accept needed library $i."                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
                      $echo "*** I have the capability to make that library automatically link in when"                      echo "*** I have the capability to make that library automatically link in when"
                      $echo "*** you link to this library.  But I can only do this if you have a"                      echo "*** you link to this library.  But I can only do this if you have a"
                      $echo "*** shared version of the library, which you do not appear to have"                      echo "*** shared version of the library, which you do not appear to have"
                      $echo "*** because a test_compile did reveal that the linker did not use this one"                      echo "*** because a test_compile did reveal that the linker did not use this one"
                      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."                      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
                     fi                      fi
                   fi                    fi
                 else                  else
                   droppeddeps=yes                    droppeddeps=yes
                  $echo                  echo
                  $echo "*** Warning!  Library $i is needed by this library but I was not able to"                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
                  $echo "***  make it link in!  You will probably need to install it or some"                  echo "*** make it link in!  You will probably need to install it or some"
                  $echo "*** library that it depends on before this library will be fully"                  echo "*** library that it depends on before this library will be fully"
                  $echo "*** functional.  Installing it before continuing would be even better."                  echo "*** functional.  Installing it before continuing would be even better."
                 fi                  fi
              else                ;;
                newdeplibs="$newdeplibs $i"              *)
              fi                func_append newdeplibs " $i"
                 ;;
               esac
             done              done
           fi            fi
           ;;            ;;
         file_magic*)          file_magic*)
          set dummy $deplibs_check_method          set dummy $deplibs_check_method; shift
          file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
           for a_deplib in $deplibs; do            for a_deplib in $deplibs; do
            name=`expr $a_deplib : '-l\(.*\)'`            case $a_deplib in
            # If $name is empty we are operating on a -L argument.            -l*)
            if test "$name" != "" && test  "$name" != "0"; then              func_stripname -l '' "$a_deplib"
               name=$func_stripname_result
               if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                 case " $predeps $postdeps " in                  case " $predeps $postdeps " in
                 *" $a_deplib "*)                  *" $a_deplib "*)
                  newdeplibs="$newdeplibs $a_deplib"                  func_append newdeplibs " $a_deplib"
                   a_deplib=""                    a_deplib=""
                   ;;                    ;;
                 esac                  esac
               fi                fi
               if test -n "$a_deplib" ; then                if test -n "$a_deplib" ; then
                libname=`eval \\$echo \"$libname_spec\"`                libname=`eval "\\$ECHO \"$libname_spec\""`
                 if test -n "$file_magic_glob"; then
                   libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
                 else
                   libnameglob=$libname
                 fi
                 test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
                 for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do                  for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`                  if test "$want_nocaseglob" = yes; then
                     shopt -s nocaseglob
                     potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
                     $nocaseglob
                   else
                     potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
                   fi
                   for potent_lib in $potential_libs; do                    for potent_lib in $potential_libs; do
                       # Follow soft links.                        # Follow soft links.
                      if ls -lLd "$potent_lib" 2>/dev/null \                      if ls -lLd "$potent_lib" 2>/dev/null |
                         | grep " -> " >/dev/null; then                         $GREP " -> " >/dev/null; then
                         continue                          continue
                       fi                        fi
                       # The statement above tries to avoid entering an                        # The statement above tries to avoid entering an
Line 3639  EOF Line 7812  EOF
                         potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`                          potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
                         case $potliblink in                          case $potliblink in
                         [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;                          [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
                        *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;                        *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
                         esac                          esac
                       done                        done
                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
                         | ${SED} 10q \                         $SED -e 10q |
                         | $EGREP "$file_magic_regex" > /dev/null; then                         $EGREP "$file_magic_regex" > /dev/null; then
                        newdeplibs="$newdeplibs $a_deplib"                        func_append newdeplibs " $a_deplib"
                         a_deplib=""                          a_deplib=""
                         break 2                          break 2
                       fi                        fi
Line 3654  EOF Line 7827  EOF
               fi                fi
               if test -n "$a_deplib" ; then                if test -n "$a_deplib" ; then
                 droppeddeps=yes                  droppeddeps=yes
                $echo                echo
                $echo "*** Warning: linker path does not have real file for library $a_deplib."                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
                $echo "*** I have the capability to make that library automatically link in when"                echo "*** I have the capability to make that library automatically link in when"
                $echo "*** you link to this library.  But I can only do this if you have a"                echo "*** you link to this library.  But I can only do this if you have a"
                $echo "*** shared version of the library, which you do not appear to have"                echo "*** shared version of the library, which you do not appear to have"
                $echo "*** because I did check the linker path looking for a file starting"                echo "*** because I did check the linker path looking for a file starting"
                 if test -z "$potlib" ; then                  if test -z "$potlib" ; then
                  $echo "*** with $libname but no candidates were found. (...for file magic test)"                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
                 else                  else
                  $echo "*** with $libname and none of the candidates passed a file format test"                  $ECHO "*** with $libname and none of the candidates passed a file format test"
                  $echo "*** using a file magic. Last file checked: $potlib"                  $ECHO "*** using a file magic. Last file checked: $potlib"
                 fi                  fi
               fi                fi
            else              ;;
             *)
               # Add a -L argument.                # Add a -L argument.
              newdeplibs="$newdeplibs $a_deplib"              func_append newdeplibs " $a_deplib"
            fi              ;;
             esac
           done # Gone through all deplibs.            done # Gone through all deplibs.
           ;;            ;;
         match_pattern*)          match_pattern*)
          set dummy $deplibs_check_method          set dummy $deplibs_check_method; shift
          match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
           for a_deplib in $deplibs; do            for a_deplib in $deplibs; do
            name=`expr $a_deplib : '-l\(.*\)'`            case $a_deplib in
            # If $name is empty we are operating on a -L argument.            -l*)
            if test -n "$name" && test "$name" != "0"; then              func_stripname -l '' "$a_deplib"
               name=$func_stripname_result
               if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
                 case " $predeps $postdeps " in                  case " $predeps $postdeps " in
                 *" $a_deplib "*)                  *" $a_deplib "*)
                  newdeplibs="$newdeplibs $a_deplib"                  func_append newdeplibs " $a_deplib"
                   a_deplib=""                    a_deplib=""
                   ;;                    ;;
                 esac                  esac
               fi                fi
               if test -n "$a_deplib" ; then                if test -n "$a_deplib" ; then
                libname=`eval \\$echo \"$libname_spec\"`                libname=`eval "\\$ECHO \"$libname_spec\""`
                 for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do                  for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                   potential_libs=`ls $i/$libname[.-]* 2>/dev/null`                    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                   for potent_lib in $potential_libs; do                    for potent_lib in $potential_libs; do
                     potlib="$potent_lib" # see symlink-check above in file_magic test                      potlib="$potent_lib" # see symlink-check above in file_magic test
                    if eval $echo \"$potent_lib\" 2>/dev/null \                    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
                        | ${SED} 10q \                       $EGREP "$match_pattern_regex" > /dev/null; then
                        | $EGREP "$match_pattern_regex" > /dev/null; then                      func_append newdeplibs " $a_deplib"
                      newdeplibs="$newdeplibs $a_deplib" 
                       a_deplib=""                        a_deplib=""
                       break 2                        break 2
                     fi                      fi
Line 3706  EOF Line 7881  EOF
               fi                fi
               if test -n "$a_deplib" ; then                if test -n "$a_deplib" ; then
                 droppeddeps=yes                  droppeddeps=yes
                $echo                echo
                $echo "*** Warning: linker path does not have real file for library $a_deplib."                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
                $echo "*** I have the capability to make that library automatically link in when"                echo "*** I have the capability to make that library automatically link in when"
                $echo "*** you link to this library.  But I can only do this if you have a"                echo "*** you link to this library.  But I can only do this if you have a"
                $echo "*** shared version of the library, which you do not appear to have"                echo "*** shared version of the library, which you do not appear to have"
                $echo "*** because I did check the linker path looking for a file starting"                echo "*** because I did check the linker path looking for a file starting"
                 if test -z "$potlib" ; then                  if test -z "$potlib" ; then
                  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
                 else                  else
                  $echo "*** with $libname and none of the candidates passed a file format test"                  $ECHO "*** with $libname and none of the candidates passed a file format test"
                  $echo "*** using a regex pattern. Last file checked: $potlib"                  $ECHO "*** using a regex pattern. Last file checked: $potlib"
                 fi                  fi
               fi                fi
            else              ;;
             *)
               # Add a -L argument.                # Add a -L argument.
              newdeplibs="$newdeplibs $a_deplib"              func_append newdeplibs " $a_deplib"
            fi              ;;
             esac
           done # Gone through all deplibs.            done # Gone through all deplibs.
           ;;            ;;
         none | unknown | *)          none | unknown | *)
           newdeplibs=""            newdeplibs=""
          tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \          tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
            -e 's/ -[LR][^ ]*//g'` 
           if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
             for i in $predeps $postdeps ; do              for i in $predeps $postdeps ; do
               # can't use Xsed below, because $i might contain '/'                # can't use Xsed below, because $i might contain '/'
              tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`              tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
             done              done
           fi            fi
          if $echo "X $tmp_deplibs" | $Xsed -e 's/[       ]//g' \          case $tmp_deplibs in
            | grep . >/dev/null; then          *[!\  \ ]*)
            $echo            echo
             if test "X$deplibs_check_method" = "Xnone"; then              if test "X$deplibs_check_method" = "Xnone"; then
              $echo "*** Warning: inter-library dependencies are not supported in this platform."              echo "*** Warning: inter-library dependencies are not supported in this platform."
             else              else
              $echo "*** Warning: inter-library dependencies are not known to be supported."              echo "*** Warning: inter-library dependencies are not known to be supported."
             fi              fi
            $echo "*** All declared inter-library dependencies are being dropped."            echo "*** All declared inter-library dependencies are being dropped."
             droppeddeps=yes              droppeddeps=yes
          fi            ;;
           esac
           ;;            ;;
         esac          esac
         versuffix=$versuffix_save          versuffix=$versuffix_save
Line 3756  EOF Line 7933  EOF
   
         case $host in          case $host in
         *-*-rhapsody* | *-*-darwin1.[012])          *-*-rhapsody* | *-*-darwin1.[012])
          # On Rhapsody replace the C library is the System framework          # On Rhapsody replace the C library with the System framework
          newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`          newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
           ;;            ;;
         esac          esac
   
         if test "$droppeddeps" = yes; then          if test "$droppeddeps" = yes; then
           if test "$module" = yes; then            if test "$module" = yes; then
            $echo            echo
            $echo "*** Warning: libtool could not satisfy all declared inter-library"            echo "*** Warning: libtool could not satisfy all declared inter-library"
            $echo "*** dependencies of module $libname.  Therefore, libtool will create"            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
            $echo "*** a static module, that should work as long as the dlopening"            echo "*** a static module, that should work as long as the dlopening"
            $echo "*** application is linked with the -dlopen flag."            echo "*** application is linked with the -dlopen flag."
             if test -z "$global_symbol_pipe"; then              if test -z "$global_symbol_pipe"; then
              $echo              echo
              $echo "*** However, this would only work if libtool was able to extract symbol"              echo "*** However, this would only work if libtool was able to extract symbol"
              $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"              echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
              $echo "*** not find such a program.  So, this module is probably useless."              echo "*** not find such a program.  So, this module is probably useless."
              $echo "*** \`nm' from GNU binutils and a full rebuild may help."              echo "*** \`nm' from GNU binutils and a full rebuild may help."
             fi              fi
             if test "$build_old_libs" = no; then              if test "$build_old_libs" = no; then
               oldlibs="$output_objdir/$libname.$libext"                oldlibs="$output_objdir/$libname.$libext"
Line 3783  EOF Line 7960  EOF
               build_libtool_libs=no                build_libtool_libs=no
             fi              fi
           else            else
            $echo "*** The inter-library dependencies that have been dropped here will be"            echo "*** The inter-library dependencies that have been dropped here will be"
            $echo "*** automatically added whenever a program is linked with this library"            echo "*** automatically added whenever a program is linked with this library"
            $echo "*** or is declared to -dlopen it."            echo "*** or is declared to -dlopen it."
   
             if test "$allow_undefined" = no; then              if test "$allow_undefined" = no; then
              $echo              echo
              $echo "*** Since this library must not contain undefined symbols,"              echo "*** Since this library must not contain undefined symbols,"
              $echo "*** because either the platform does not support them or"              echo "*** because either the platform does not support them or"
              $echo "*** it was explicitly requested with -no-undefined,"              echo "*** it was explicitly requested with -no-undefined,"
              $echo "*** libtool will only create a static version of it."              echo "*** libtool will only create a static version of it."
               if test "$build_old_libs" = no; then                if test "$build_old_libs" = no; then
                 oldlibs="$output_objdir/$libname.$libext"                  oldlibs="$output_objdir/$libname.$libext"
                 build_libtool_libs=module                  build_libtool_libs=module
Line 3806  EOF Line 7983  EOF
         # Done checking deplibs!          # Done checking deplibs!
         deplibs=$newdeplibs          deplibs=$newdeplibs
       fi        fi
         # Time to change all our "foo.ltframework" stuff back to "-framework foo"
         case $host in
           *-*-darwin*)
             newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
             new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
             deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
             ;;
         esac
   
   
       # move library search paths that coincide with paths to not yet        # move library search paths that coincide with paths to not yet
       # installed libraries to the beginning of the library search list        # installed libraries to the beginning of the library search list
       new_libs=        new_libs=
Line 3817  EOF Line 8001  EOF
         *)          *)
           case " $deplibs " in            case " $deplibs " in
           *" -L$path/$objdir "*)            *" -L$path/$objdir "*)
            new_libs="$new_libs -L$path/$objdir" ;;            func_append new_libs " -L$path/$objdir" ;;
           esac            esac
           ;;            ;;
         esac          esac
Line 3827  EOF Line 8011  EOF
         -L*)          -L*)
           case " $new_libs " in            case " $new_libs " in
           *" $deplib "*) ;;            *" $deplib "*) ;;
          *) new_libs="$new_libs $deplib" ;;          *) func_append new_libs " $deplib" ;;
           esac            esac
           ;;            ;;
        *) new_libs="$new_libs $deplib" ;;        *) func_append new_libs " $deplib" ;;
         esac          esac
       done        done
       deplibs="$new_libs"        deplibs="$new_libs"
   
   
       # All the library-specific variables (install_libdir is set above).        # All the library-specific variables (install_libdir is set above).
       library_names=        library_names=
       old_library=        old_library=
Line 3848  EOF Line 8031  EOF
           hardcode_libdirs=            hardcode_libdirs=
           dep_rpath=            dep_rpath=
           rpath="$finalize_rpath"            rpath="$finalize_rpath"
          test "$mode" != relink && rpath="$compile_rpath$rpath"          test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
           for libdir in $rpath; do            for libdir in $rpath; do
             if test -n "$hardcode_libdir_flag_spec"; then              if test -n "$hardcode_libdir_flag_spec"; then
               if test -n "$hardcode_libdir_separator"; then                if test -n "$hardcode_libdir_separator"; then
                   func_replace_sysroot "$libdir"
                   libdir=$func_replace_sysroot_result
                 if test -z "$hardcode_libdirs"; then                  if test -z "$hardcode_libdirs"; then
                   hardcode_libdirs="$libdir"                    hardcode_libdirs="$libdir"
                 else                  else
Line 3860  EOF Line 8045  EOF
                   *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)                    *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                     ;;                      ;;
                   *)                    *)
                    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"                    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
                     ;;                      ;;
                   esac                    esac
                 fi                  fi
               else                else
                 eval flag=\"$hardcode_libdir_flag_spec\"                  eval flag=\"$hardcode_libdir_flag_spec\"
                dep_rpath="$dep_rpath $flag"                func_append dep_rpath " $flag"
               fi                fi
             elif test -n "$runpath_var"; then              elif test -n "$runpath_var"; then
               case "$perm_rpath " in                case "$perm_rpath " in
               *" $libdir "*) ;;                *" $libdir "*) ;;
              *) perm_rpath="$perm_rpath $libdir" ;;              *) func_apped perm_rpath " $libdir" ;;
               esac                esac
             fi              fi
           done            done
Line 3889  EOF Line 8074  EOF
             # We should set the runpath_var.              # We should set the runpath_var.
             rpath=              rpath=
             for dir in $perm_rpath; do              for dir in $perm_rpath; do
              rpath="$rpath$dir:"              func_append rpath "$dir:"
             done              done
             eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"              eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
           fi            fi
Line 3897  EOF Line 8082  EOF
         fi          fi
   
         shlibpath="$finalize_shlibpath"          shlibpath="$finalize_shlibpath"
        test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"        test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
         if test -n "$shlibpath"; then          if test -n "$shlibpath"; then
           eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"            eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
         fi          fi
Line 3906  EOF Line 8091  EOF
         eval shared_ext=\"$shrext_cmds\"          eval shared_ext=\"$shrext_cmds\"
         eval library_names=\"$library_names_spec\"          eval library_names=\"$library_names_spec\"
         set dummy $library_names          set dummy $library_names
        realname="$2"        shift
        shift; shift        realname="$1"
         shift
   
         if test -n "$soname_spec"; then          if test -n "$soname_spec"; then
           eval soname=\"$soname_spec\"            eval soname=\"$soname_spec\"
Line 3922  EOF Line 8108  EOF
         linknames=          linknames=
         for link          for link
         do          do
          linknames="$linknames $link"          func_append linknames " $link"
         done          done
   
         # Use standard objects if they are pic          # Use standard objects if they are pic
        test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`        test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
         test "X$libobjs" = "X " && libobjs=
   
           delfiles=
           if test -n "$export_symbols" && test -n "$include_expsyms"; then
             $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
             export_symbols="$output_objdir/$libname.uexp"
             func_append delfiles " $export_symbols"
           fi
   
           orig_export_symbols=
           case $host_os in
           cygwin* | mingw* | cegcc*)
             if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
               # exporting using user supplied symfile
               if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
                 # and it's NOT already a .def file. Must figure out
                 # which of the given symbols are data symbols and tag
                 # them as such. So, trigger use of export_symbols_cmds.
                 # export_symbols gets reassigned inside the "prepare
                 # the list of exported symbols" if statement, so the
                 # include_expsyms logic still works.
                 orig_export_symbols="$export_symbols"
                 export_symbols=
                 always_export_symbols=yes
               fi
             fi
             ;;
           esac
   
         # Prepare the list of exported symbols          # Prepare the list of exported symbols
         if test -z "$export_symbols"; then          if test -z "$export_symbols"; then
           if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then            if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
            $show "generating symbol list for \`$libname.la'"            func_verbose "generating symbol list for \`$libname.la'"
             export_symbols="$output_objdir/$libname.exp"              export_symbols="$output_objdir/$libname.exp"
            $run $rm $export_symbols            $opt_dry_run || $RM $export_symbols
             cmds=$export_symbols_cmds              cmds=$export_symbols_cmds
             save_ifs="$IFS"; IFS='~'              save_ifs="$IFS"; IFS='~'
            for cmd in $cmds; do            for cmd1 in $cmds; do
               IFS="$save_ifs"                IFS="$save_ifs"
              eval cmd=\"$cmd\"              # Take the normal branch if the nm_file_list_spec branch
              if len=`expr "X$cmd" : ".*"` &&              # doesn't work or if tool conversion is not needed.
               test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then              case $nm_file_list_spec~$to_tool_file_cmd in
                $show "$cmd"                *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
                $run eval "$cmd" || exit $?                  try_normal_branch=yes
                skipped_export=false                  eval cmd=\"$cmd1\"
                   func_len " $cmd"
                   len=$func_len_result
                   ;;
                 *)
                   try_normal_branch=no
                   ;;
               esac
               if test "$try_normal_branch" = yes \
                  && { test "$len" -lt "$max_cmd_len" \
                       || test "$max_cmd_len" -le -1; }
               then
                 func_show_eval "$cmd" 'exit $?'
                 skipped_export=false
               elif test -n "$nm_file_list_spec"; then
                 func_basename "$output"
                 output_la=$func_basename_result
                 save_libobjs=$libobjs
                 save_output=$output
                 output=${output_objdir}/${output_la}.nm
                 func_to_tool_file "$output"
                 libobjs=$nm_file_list_spec$func_to_tool_file_result
                 func_append delfiles " $output"
                 func_verbose "creating $NM input file list: $output"
                 for obj in $save_libobjs; do
                   func_to_tool_file "$obj"
                   $ECHO "$func_to_tool_file_result"
                 done > "$output"
                 eval cmd=\"$cmd1\"
                 func_show_eval "$cmd" 'exit $?'
                 output=$save_output
                 libobjs=$save_libobjs
                 skipped_export=false
               else                else
                # The command line is too long to execute in one step.                # The command line is too long to execute in one step.
                $show "using reloadable object file for export list..."                func_verbose "using reloadable object file for export list..."
                skipped_export=:                skipped_export=:
                 # Break out early, otherwise skipped_export may be                  # Break out early, otherwise skipped_export may be
                 # set to false by a later but shorter cmd.                  # set to false by a later but shorter cmd.
                 break                  break
               fi                fi
             done              done
             IFS="$save_ifs"              IFS="$save_ifs"
            if test -n "$export_symbols_regex"; then            if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
              $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
              $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
              $show "$mv \"${export_symbols}T\" \"$export_symbols\"" 
              $run eval '$mv "${export_symbols}T" "$export_symbols"' 
             fi              fi
           fi            fi
         fi          fi
   
         if test -n "$export_symbols" && test -n "$include_expsyms"; then          if test -n "$export_symbols" && test -n "$include_expsyms"; then
          $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'          tmp_export_symbols="$export_symbols"
           test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
           $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
         fi          fi
   
           if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
             # The given exports_symbols file has to be filtered, so filter it.
             func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
             # FIXME: $output_objdir/$libname.filter potentially contains lots of
             # 's' commands which not all seds can handle. GNU sed should be fine
             # though. Also, the filter scales superlinearly with the number of
             # global variables. join(1) would be nice here, but unfortunately
             # isn't a blessed tool.
             $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
             func_append delfiles " $export_symbols $output_objdir/$libname.filter"
             export_symbols=$output_objdir/$libname.def
             $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
           fi
   
         tmp_deplibs=          tmp_deplibs=
         for test_deplib in $deplibs; do          for test_deplib in $deplibs; do
                case " $convenience " in          case " $convenience " in
                *" $test_deplib "*) ;;          *" $test_deplib "*) ;;
                *)          *)
                        tmp_deplibs="$tmp_deplibs $test_deplib"            func_append tmp_deplibs " $test_deplib"
                        ;;            ;;
                esac          esac
         done          done
         deplibs="$tmp_deplibs"          deplibs="$tmp_deplibs"
   
         if test -n "$convenience"; then          if test -n "$convenience"; then
             if test -n "$whole_archive_flag_spec" &&
               test "$compiler_needs_object" = yes &&
               test -z "$libobjs"; then
               # extract the archives, so we have objects to list.
               # TODO: could optimize this to just extract one archive.
               whole_archive_flag_spec=
             fi
           if test -n "$whole_archive_flag_spec"; then            if test -n "$whole_archive_flag_spec"; then
             save_libobjs=$libobjs              save_libobjs=$libobjs
             eval libobjs=\"\$libobjs $whole_archive_flag_spec\"              eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
               test "X$libobjs" = "X " && libobjs=
           else            else
             gentop="$output_objdir/${outputname}x"              gentop="$output_objdir/${outputname}x"
            generated="$generated $gentop"            func_append generated " $gentop"
   
             func_extract_archives $gentop $convenience              func_extract_archives $gentop $convenience
            libobjs="$libobjs $func_extract_archives_result"            func_append libobjs " $func_extract_archives_result"
             test "X$libobjs" = "X " && libobjs=
           fi            fi
         fi          fi
        
         if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then          if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
           eval flag=\"$thread_safe_flag_spec\"            eval flag=\"$thread_safe_flag_spec\"
          linker_flags="$linker_flags $flag"          func_append linker_flags " $flag"
         fi          fi
   
         # Make a backup of the uninstalled library when relinking          # Make a backup of the uninstalled library when relinking
        if test "$mode" = relink; then        if test "$opt_mode" = relink; then
          $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
         fi          fi
   
         # Do each of the archive commands.          # Do each of the archive commands.
Line 4011  EOF Line 8280  EOF
             cmds=$module_cmds              cmds=$module_cmds
           fi            fi
         else          else
        if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
          eval test_cmds=\"$archive_expsym_cmds\"            eval test_cmds=\"$archive_expsym_cmds\"
          cmds=$archive_expsym_cmds            cmds=$archive_expsym_cmds
        else          else
          eval test_cmds=\"$archive_cmds\"            eval test_cmds=\"$archive_cmds\"
          cmds=$archive_cmds            cmds=$archive_cmds
           fi            fi
         fi          fi
   
         if test "X$skipped_export" != "X:" &&          if test "X$skipped_export" != "X:" &&
           len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&           func_len " $test_cmds" &&
           test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then           len=$func_len_result &&
            test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
           :            :
         else          else
          # The command line is too long to link in one step, link piecewise.          # The command line is too long to link in one step, link piecewise
          $echo "creating reloadable object files..."          # or, if using GNU ld and skipped_export is not :, use a linker
           # script.
   
           # Save the value of $output and $libobjs because we want to            # Save the value of $output and $libobjs because we want to
           # use them later.  If we have whole_archive_flag_spec, we            # use them later.  If we have whole_archive_flag_spec, we
Line 4040  EOF Line 8311  EOF
             save_libobjs=$libobjs              save_libobjs=$libobjs
           fi            fi
           save_output=$output            save_output=$output
          output_la=`$echo "X$output" | $Xsed -e "$basename"`          func_basename "$output"
           output_la=$func_basename_result
   
           # Clear the reloadable object creation command queue and            # Clear the reloadable object creation command queue and
           # initialize k to one.            # initialize k to one.
           test_cmds=            test_cmds=
           concat_cmds=            concat_cmds=
           objlist=            objlist=
           delfiles=  
           last_robj=            last_robj=
           k=1            k=1
          output=$output_objdir/$output_la-${k}.$objext
          # Loop over the list of objects to be linked.          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
          for obj in $save_libobjs            output=${output_objdir}/${output_la}.lnkscript
          do            func_verbose "creating GNU ld script: $output"
            eval test_cmds=\"$reload_cmds $objlist $last_robj\"            echo 'INPUT (' > $output
            if test "X$objlist" = X ||            for obj in $save_libobjs
               { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&            do
                 test "$len" -le "$max_cmd_len"; }; then              func_to_tool_file "$obj"
              objlist="$objlist $obj"              $ECHO "$func_to_tool_file_result" >> $output
             done
             echo ')' >> $output
             func_append delfiles " $output"
             func_to_tool_file "$output"
             output=$func_to_tool_file_result
           elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
             output=${output_objdir}/${output_la}.lnk
             func_verbose "creating linker input file list: $output"
             : > $output
             set x $save_libobjs
             shift
             firstobj=
             if test "$compiler_needs_object" = yes; then
               firstobj="$1 "
               shift
             fi
             for obj
             do
               func_to_tool_file "$obj"
               $ECHO "$func_to_tool_file_result" >> $output
             done
             func_append delfiles " $output"
             func_to_tool_file "$output"
             output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
           else
             if test -n "$save_libobjs"; then
               func_verbose "creating reloadable object files..."
               output=$output_objdir/$output_la-${k}.$objext
               eval test_cmds=\"$reload_cmds\"
               func_len " $test_cmds"
               len0=$func_len_result
               len=$len0
 
               # Loop over the list of objects to be linked.
               for obj in $save_libobjs
               do
                 func_len " $obj"
                 func_arith $len + $func_len_result
                 len=$func_arith_result
                 if test "X$objlist" = X ||
                    test "$len" -lt "$max_cmd_len"; then
                   func_append objlist " $obj"
                 else
                   # The command $test_cmds is almost too long, add a
                   # command to the queue.
                   if test "$k" -eq 1 ; then
                     # The first file doesn't have a previous command to add.
                     reload_objs=$objlist
                     eval concat_cmds=\"$reload_cmds\"
                   else
                     # All subsequent reloadable object files will link in
                     # the last one created.
                     reload_objs="$objlist $last_robj"
                     eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
                   fi
                   last_robj=$output_objdir/$output_la-${k}.$objext
                   func_arith $k + 1
                   k=$func_arith_result
                   output=$output_objdir/$output_la-${k}.$objext
                   objlist=" $obj"
                   func_len " $last_robj"
                   func_arith $len0 + $func_len_result
                   len=$func_arith_result
                 fi
               done
               # Handle the remaining objects by creating one last
               # reloadable object file.  All subsequent reloadable object
               # files will link in the last one created.
               test -z "$concat_cmds" || concat_cmds=$concat_cmds~
               reload_objs="$objlist $last_robj"
               eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
               if test -n "$last_robj"; then
                 eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
               fi
               func_append delfiles " $output"
 
             else              else
              # The command $test_cmds is almost too long, add a              output=
              # command to the queue.            fi
              if test "$k" -eq 1 ; then
                # The first file doesn't have a previous command to add.            if ${skipped_export-false}; then
                eval concat_cmds=\"$reload_cmds $objlist $last_robj\"              func_verbose "generating symbol list for \`$libname.la'"
              else              export_symbols="$output_objdir/$libname.exp"
                # All subsequent reloadable object files will link in              $opt_dry_run || $RM $export_symbols
                # the last one created.              libobjs=$output
                eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"              # Append the command to create the export file.
               test -z "$concat_cmds" || concat_cmds=$concat_cmds~
               eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
               if test -n "$last_robj"; then
                 eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
               fi                fi
               last_robj=$output_objdir/$output_la-${k}.$objext  
               k=`expr $k + 1`  
               output=$output_objdir/$output_la-${k}.$objext  
               objlist=$obj  
               len=1  
             fi              fi
           done  
           # Handle the remaining objects by creating one last  
           # reloadable object file.  All subsequent reloadable object  
           # files will link in the last one created.  
           test -z "$concat_cmds" || concat_cmds=$concat_cmds~  
           eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"  
   
          if ${skipped_export-false}; then            test -n "$save_libobjs" &&
            $show "generating symbol list for \`$libname.la'"              func_verbose "creating a temporary reloadable object file: $output"
            export_symbols="$output_objdir/$libname.exp" 
            $run $rm $export_symbols 
            libobjs=$output 
            # Append the command to create the export file. 
            eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" 
          fi 
   
          # Set up a command to remove the reloadable object files            # Loop through the commands generated above and execute them.
          # after they are used.            save_ifs="$IFS"; IFS='~'
          i=0            for cmd in $concat_cmds; do
          while test "$i" -lt "$k"              IFS="$save_ifs"
          do              $opt_silent || {
            i=`expr $i + 1`                  func_quote_for_expand "$cmd"
            delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"                  eval "func_echo $func_quote_for_expand_result"
          done              }
               $opt_dry_run || eval "$cmd" || {
                 lt_exit=$?
   
          $echo "creating a temporary reloadable object file: $output"                # Restore the uninstalled library and exit
                 if test "$opt_mode" = relink; then
                   ( cd "$output_objdir" && \
                     $RM "${realname}T" && \
                     $MV "${realname}U" "$realname" )
                 fi
   
          # Loop through the commands generated above and execute them.                exit $lt_exit
          save_ifs="$IFS"; IFS='~'              }
          for cmd in $concat_cmds; do            done
             IFS="$save_ifs"              IFS="$save_ifs"
             $show "$cmd"  
             $run eval "$cmd" || exit $?  
           done  
           IFS="$save_ifs"  
   
               if test -n "$export_symbols_regex" && ${skipped_export-false}; then
                 func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
                 func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
               fi
             fi
   
             if ${skipped_export-false}; then
               if test -n "$export_symbols" && test -n "$include_expsyms"; then
                 tmp_export_symbols="$export_symbols"
                 test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
                 $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
               fi
   
               if test -n "$orig_export_symbols"; then
                 # The given exports_symbols file has to be filtered, so filter it.
                 func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
                 # FIXME: $output_objdir/$libname.filter potentially contains lots of
                 # 's' commands which not all seds can handle. GNU sed should be fine
                 # though. Also, the filter scales superlinearly with the number of
                 # global variables. join(1) would be nice here, but unfortunately
                 # isn't a blessed tool.
                 $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
                 func_append delfiles " $export_symbols $output_objdir/$libname.filter"
                 export_symbols=$output_objdir/$libname.def
                 $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
               fi
             fi
   
           libobjs=$output            libobjs=$output
           # Restore the value of output.            # Restore the value of output.
           output=$save_output            output=$save_output
   
           if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then            if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
             eval libobjs=\"\$libobjs $whole_archive_flag_spec\"              eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
               test "X$libobjs" = "X " && libobjs=
           fi            fi
           # Expand the library linking commands again to reset the            # Expand the library linking commands again to reset the
           # value of $libobjs for piecewise linking.            # value of $libobjs for piecewise linking.
Line 4130  EOF Line 8496  EOF
               cmds=$module_cmds                cmds=$module_cmds
             fi              fi
           else            else
          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
            cmds=$archive_expsym_cmds              cmds=$archive_expsym_cmds
          else            else
            cmds=$archive_cmds              cmds=$archive_cmds
             fi              fi
           fi            fi
           fi
   
          # Append the command to remove the reloadable object files        if test -n "$delfiles"; then
          # to the just-reset $cmds.          # Append the command to remove temporary files to $cmds.
          eval cmds=\"\$cmds~\$rm $delfiles\"          eval cmds=\"\$cmds~\$RM $delfiles\"
         fi          fi
   
           # Add any objects from preloaded convenience libraries
           if test -n "$dlprefiles"; then
             gentop="$output_objdir/${outputname}x"
             func_append generated " $gentop"
   
             func_extract_archives $gentop $dlprefiles
             func_append libobjs " $func_extract_archives_result"
             test "X$libobjs" = "X " && libobjs=
           fi
   
         save_ifs="$IFS"; IFS='~'          save_ifs="$IFS"; IFS='~'
         for cmd in $cmds; do          for cmd in $cmds; do
           IFS="$save_ifs"            IFS="$save_ifs"
           eval cmd=\"$cmd\"            eval cmd=\"$cmd\"
          $show "$cmd"          $opt_silent || {
          $run eval "$cmd" || {            func_quote_for_expand "$cmd"
             eval "func_echo $func_quote_for_expand_result"
           }
           $opt_dry_run || eval "$cmd" || {
             lt_exit=$?              lt_exit=$?
   
             # Restore the uninstalled library and exit              # Restore the uninstalled library and exit
            if test "$mode" = relink; then            if test "$opt_mode" = relink; then
              $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'              ( cd "$output_objdir" && \
                 $RM "${realname}T" && \
                 $MV "${realname}U" "$realname" )
             fi              fi
   
             exit $lt_exit              exit $lt_exit
Line 4160  EOF Line 8543  EOF
         IFS="$save_ifs"          IFS="$save_ifs"
   
         # Restore the uninstalled library and exit          # Restore the uninstalled library and exit
        if test "$mode" = relink; then        if test "$opt_mode" = relink; then
          $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
   
           if test -n "$convenience"; then            if test -n "$convenience"; then
             if test -z "$whole_archive_flag_spec"; then              if test -z "$whole_archive_flag_spec"; then
              $show "${rm}r $gentop"              func_show_eval '${RM}r "$gentop"'
              $run ${rm}r "$gentop" 
             fi              fi
           fi            fi
   
Line 4176  EOF Line 8558  EOF
         # Create links to the real library.          # Create links to the real library.
         for linkname in $linknames; do          for linkname in $linknames; do
           if test "$realname" != "$linkname"; then            if test "$realname" != "$linkname"; then
            $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
            $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? 
           fi            fi
         done          done
   
Line 4190  EOF Line 8571  EOF
       ;;        ;;
   
     obj)      obj)
       if test -n "$deplibs"; then  
         $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2  
       fi  
   
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then        if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2        func_warning "\`-dlopen' is ignored for objects"
       fi        fi
   
      if test -n "$rpath"; then      case " $deplibs" in
        $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2      *\ -l* | *\ -L*)
      fi        func_warning "\`-l' and \`-L' are ignored for objects" ;;
       esac
   
      if test -n "$xrpath"; then      test -n "$rpath" && \
        $echo "$modename: warning: \`-R' is ignored for objects" 1>&2        func_warning "\`-rpath' is ignored for objects"
      fi 
   
      if test -n "$vinfo"; then      test -n "$xrpath" && \
        $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2        func_warning "\`-R' is ignored for objects"
      fi 
   
      if test -n "$release"; then      test -n "$vinfo" && \
        $echo "$modename: warning: \`-release' is ignored for objects" 1>&2        func_warning "\`-version-info' is ignored for objects"
      fi 
   
         test -n "$release" && \
           func_warning "\`-release' is ignored for objects"
   
       case $output in        case $output in
       *.lo)        *.lo)
        if test -n "$objs$old_deplibs"; then        test -n "$objs$old_deplibs" && \
          $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2          func_fatal_error "cannot build library object \`$output' from non-libtool objects"
          exit $EXIT_FAILURE
        fi        libobj=$output
        libobj="$output"        func_lo2o "$libobj"
        obj=`$echo "X$output" | $Xsed -e "$lo2o"`        obj=$func_lo2o_result
         ;;          ;;
       *)        *)
         libobj=          libobj=
Line 4230  EOF Line 8608  EOF
       esac        esac
   
       # Delete the old objects.        # Delete the old objects.
      $run $rm $obj $libobj      $opt_dry_run || $RM $obj $libobj
   
       # Objects from convenience libraries.  This assumes        # Objects from convenience libraries.  This assumes
       # single-version convenience libraries.  Whenever we create        # single-version convenience libraries.  Whenever we create
Line 4239  EOF Line 8617  EOF
       reload_conv_objs=        reload_conv_objs=
       gentop=        gentop=
       # reload_cmds runs $LD directly, so let us get rid of        # reload_cmds runs $LD directly, so let us get rid of
      # -Wl from whole_archive_flag_spec      # -Wl from whole_archive_flag_spec and hope we can get by with
       # turning comma into space..
       wl=        wl=
   
       if test -n "$convenience"; then        if test -n "$convenience"; then
         if test -n "$whole_archive_flag_spec"; then          if test -n "$whole_archive_flag_spec"; then
          eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"          eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
           reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
         else          else
           gentop="$output_objdir/${obj}x"            gentop="$output_objdir/${obj}x"
          generated="$generated $gentop"          func_append generated " $gentop"
   
           func_extract_archives $gentop $convenience            func_extract_archives $gentop $convenience
           reload_conv_objs="$reload_objs $func_extract_archives_result"            reload_conv_objs="$reload_objs $func_extract_archives_result"
         fi          fi
       fi        fi
   
         # If we're not building shared, we need to use non_pic_objs
         test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
   
       # Create the old-style object.        # Create the old-style object.
      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
   
       output="$obj"        output="$obj"
      cmds=$reload_cmds      func_execute_cmds "$reload_cmds" 'exit $?'
      save_ifs="$IFS"; IFS='~' 
      for cmd in $cmds; do 
        IFS="$save_ifs" 
        eval cmd=\"$cmd\" 
        $show "$cmd" 
        $run eval "$cmd" || exit $? 
      done 
      IFS="$save_ifs" 
   
       # Exit if we aren't doing a library object file.        # Exit if we aren't doing a library object file.
       if test -z "$libobj"; then        if test -z "$libobj"; then
         if test -n "$gentop"; then          if test -n "$gentop"; then
          $show "${rm}r $gentop"          func_show_eval '${RM}r "$gentop"'
          $run ${rm}r $gentop 
         fi          fi
   
         exit $EXIT_SUCCESS          exit $EXIT_SUCCESS
Line 4280  EOF Line 8654  EOF
   
       if test "$build_libtool_libs" != yes; then        if test "$build_libtool_libs" != yes; then
         if test -n "$gentop"; then          if test -n "$gentop"; then
          $show "${rm}r $gentop"          func_show_eval '${RM}r "$gentop"'
          $run ${rm}r $gentop 
         fi          fi
   
         # Create an invalid libtool object if no PIC, so that we don't          # Create an invalid libtool object if no PIC, so that we don't
         # accidentally link it into a program.          # accidentally link it into a program.
         # $show "echo timestamp > $libobj"          # $show "echo timestamp > $libobj"
        # $run eval "echo timestamp > $libobj" || exit $?        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
         exit $EXIT_SUCCESS          exit $EXIT_SUCCESS
       fi        fi
   
Line 4295  EOF Line 8668  EOF
         # Only do commands if we really have different PIC objects.          # Only do commands if we really have different PIC objects.
         reload_objs="$libobjs $reload_conv_objs"          reload_objs="$libobjs $reload_conv_objs"
         output="$libobj"          output="$libobj"
        cmds=$reload_cmds        func_execute_cmds "$reload_cmds" 'exit $?'
        save_ifs="$IFS"; IFS='~' 
        for cmd in $cmds; do 
          IFS="$save_ifs" 
          eval cmd=\"$cmd\" 
          $show "$cmd" 
          $run eval "$cmd" || exit $? 
        done 
        IFS="$save_ifs" 
       fi        fi
   
       if test -n "$gentop"; then        if test -n "$gentop"; then
        $show "${rm}r $gentop"        func_show_eval '${RM}r "$gentop"'
        $run ${rm}r $gentop 
       fi        fi
   
       exit $EXIT_SUCCESS        exit $EXIT_SUCCESS
Line 4316  EOF Line 8680  EOF
   
     prog)      prog)
       case $host in        case $host in
        *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;        *cygwin*) func_stripname '' '.exe' "$output"
                   output=$func_stripname_result.exe;;
       esac        esac
      if test -n "$vinfo"; then      test -n "$vinfo" && \
        $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2        func_warning "\`-version-info' is ignored for programs"
      fi 
   
      if test -n "$release"; then      test -n "$release" && \
        $echo "$modename: warning: \`-release' is ignored for programs" 1>&2        func_warning "\`-release' is ignored for programs"
      fi 
   
      if test "$preload" = yes; then      test "$preload" = yes \
        if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&        && test "$dlopen_support" = unknown \
           test "$dlopen_self_static" = unknown; then        && test "$dlopen_self" = unknown \
          $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."        && test "$dlopen_self_static" = unknown && \
        fi          func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
      fi 
   
       case $host in        case $host in
       *-*-rhapsody* | *-*-darwin1.[012])        *-*-rhapsody* | *-*-darwin1.[012])
         # On Rhapsody replace the C library is the System framework          # On Rhapsody replace the C library is the System framework
        compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`        compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
        finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`        finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
         ;;          ;;
       esac        esac
   
       case $host in        case $host in
      *darwin*)      *-*-darwin*)
        # Don't allow lazy linking, it breaks C++ global constructors        # Don't allow lazy linking, it breaks C++ global constructors
        if test "$tagname" = CXX ; then        # But is supposedly fixed on 10.4 or later (yay!).
        compile_command="$compile_command ${wl}-bind_at_load"        if test "$tagname" = CXX ; then
        finalize_command="$finalize_command ${wl}-bind_at_load"          case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
        fi            10.[0123])
        ;;              func_append compile_command " ${wl}-bind_at_load"
               func_append finalize_command " ${wl}-bind_at_load"
             ;;
           esac
         fi
         # Time to change all our "foo.ltframework" stuff back to "-framework foo"
         compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
         finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
         ;;
       esac        esac
   
   
Line 4361  EOF Line 8731  EOF
         *)          *)
           case " $compile_deplibs " in            case " $compile_deplibs " in
           *" -L$path/$objdir "*)            *" -L$path/$objdir "*)
            new_libs="$new_libs -L$path/$objdir" ;;            func_append new_libs " -L$path/$objdir" ;;
           esac            esac
           ;;            ;;
         esac          esac
Line 4371  EOF Line 8741  EOF
         -L*)          -L*)
           case " $new_libs " in            case " $new_libs " in
           *" $deplib "*) ;;            *" $deplib "*) ;;
          *) new_libs="$new_libs $deplib" ;;          *) func_append new_libs " $deplib" ;;
           esac            esac
           ;;            ;;
        *) new_libs="$new_libs $deplib" ;;        *) func_append new_libs " $deplib" ;;
         esac          esac
       done        done
       compile_deplibs="$new_libs"        compile_deplibs="$new_libs"
   
   
      compile_command="$compile_command $compile_deplibs"      func_append compile_command " $compile_deplibs"
      finalize_command="$finalize_command $finalize_deplibs"      func_append finalize_command " $finalize_deplibs"
   
       if test -n "$rpath$xrpath"; then        if test -n "$rpath$xrpath"; then
         # If the user specified any rpath flags, then add them.          # If the user specified any rpath flags, then add them.
Line 4389  EOF Line 8759  EOF
           # This is the magic to use -rpath.            # This is the magic to use -rpath.
           case "$finalize_rpath " in            case "$finalize_rpath " in
           *" $libdir "*) ;;            *" $libdir "*) ;;
          *) finalize_rpath="$finalize_rpath $libdir" ;;          *) func_append finalize_rpath " $libdir" ;;
           esac            esac
         done          done
       fi        fi
Line 4408  EOF Line 8778  EOF
               *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)                *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                 ;;                  ;;
               *)                *)
                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"                func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
                 ;;                  ;;
               esac                esac
             fi              fi
           else            else
             eval flag=\"$hardcode_libdir_flag_spec\"              eval flag=\"$hardcode_libdir_flag_spec\"
            rpath="$rpath $flag"            func_append rpath " $flag"
           fi            fi
         elif test -n "$runpath_var"; then          elif test -n "$runpath_var"; then
           case "$perm_rpath " in            case "$perm_rpath " in
           *" $libdir "*) ;;            *" $libdir "*) ;;
          *) perm_rpath="$perm_rpath $libdir" ;;          *) func_append perm_rpath " $libdir" ;;
           esac            esac
         fi          fi
         case $host in          case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
          testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`          testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
           case :$dllsearchpath: in            case :$dllsearchpath: in
           *":$libdir:"*) ;;            *":$libdir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$libdir";;          ::) dllsearchpath=$libdir;;
           *) func_append dllsearchpath ":$libdir";;
           esac            esac
           case :$dllsearchpath: in            case :$dllsearchpath: in
           *":$testbindir:"*) ;;            *":$testbindir:"*) ;;
          *) dllsearchpath="$dllsearchpath:$testbindir";;          ::) dllsearchpath=$testbindir;;
           *) func_append dllsearchpath ":$testbindir";;
           esac            esac
           ;;            ;;
         esac          esac
Line 4457  EOF Line 8829  EOF
               *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)                *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                 ;;                  ;;
               *)                *)
                hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"                func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
                 ;;                  ;;
               esac                esac
             fi              fi
           else            else
             eval flag=\"$hardcode_libdir_flag_spec\"              eval flag=\"$hardcode_libdir_flag_spec\"
            rpath="$rpath $flag"            func_append rpath " $flag"
           fi            fi
         elif test -n "$runpath_var"; then          elif test -n "$runpath_var"; then
           case "$finalize_perm_rpath " in            case "$finalize_perm_rpath " in
           *" $libdir "*) ;;            *" $libdir "*) ;;
          *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;          *) func_append finalize_perm_rpath " $libdir" ;;
           esac            esac
         fi          fi
       done        done
Line 4482  EOF Line 8854  EOF
   
       if test -n "$libobjs" && test "$build_old_libs" = yes; then        if test -n "$libobjs" && test "$build_old_libs" = yes; then
         # Transform all the library objects into standard objects.          # Transform all the library objects into standard objects.
        compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`        compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
        finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`        finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
       fi        fi
   
      dlsyms=      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then 
        if test -n "$NM" && test -n "$global_symbol_pipe"; then 
          dlsyms="${outputname}S.c" 
        else 
          $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 
        fi 
      fi 
   
      if test -n "$dlsyms"; then      # template prelinking step
        case $dlsyms in      if test -n "$prelink_cmds"; then
        "") ;;        func_execute_cmds "$prelink_cmds" 'exit $?'
        *.c) 
          # Discover the nlist of each of the dlfiles. 
          nlist="$output_objdir/${outputname}.nm" 
 
          $show "$rm $nlist ${nlist}S ${nlist}T" 
          $run $rm "$nlist" "${nlist}S" "${nlist}T" 
 
          # Parse the name list into a source file. 
          $show "creating $output_objdir/$dlsyms" 
 
          test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ 
/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ 
/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ 
 
#ifdef __cplusplus 
extern \"C\" { 
#endif 
 
/* Prevent the only kind of declaration conflicts we can make. */ 
#define lt_preloaded_symbols some_other_symbol 
 
/* External symbol declarations for the compiler. */\ 
" 
 
          if test "$dlself" = yes; then 
            $show "generating symbol list for \`$output'" 
 
            test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" 
 
            # Add our own program objects to the symbol list. 
            progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` 
            for arg in $progfiles; do 
              $show "extracting global C symbols from \`$arg'" 
              $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" 
            done 
 
            if test -n "$exclude_expsyms"; then 
              $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' 
              $run eval '$mv "$nlist"T "$nlist"' 
            fi 
 
            if test -n "$export_symbols_regex"; then 
              $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' 
              $run eval '$mv "$nlist"T "$nlist"' 
            fi 
 
            # Prepare the list of exported symbols 
            if test -z "$export_symbols"; then 
              export_symbols="$output_objdir/$outputname.exp" 
              $run $rm $export_symbols 
              $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' 
              case $host in 
              *cygwin* | *mingw* ) 
                $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' 
                $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' 
                ;; 
              esac 
            else 
              $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' 
              $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' 
              $run eval 'mv "$nlist"T "$nlist"' 
              case $host in 
              *cygwin* | *mingw* ) 
                $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' 
                $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' 
                ;; 
              esac 
            fi 
          fi 
 
          for arg in $dlprefiles; do 
            $show "extracting global C symbols from \`$arg'" 
            name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` 
            $run eval '$echo ": $name " >> "$nlist"' 
            $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" 
          done 
 
          if test -z "$run"; then 
            # Make sure we have at least an empty file. 
            test -f "$nlist" || : > "$nlist" 
 
            if test -n "$exclude_expsyms"; then 
              $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T 
              $mv "$nlist"T "$nlist" 
            fi 
 
            # Try sorting and uniquifying the output. 
            if grep -v "^: " < "$nlist" | 
                if sort -k 3 </dev/null >/dev/null 2>&1; then 
                  sort -k 3 
                else 
                  sort +2 
                fi | 
                uniq > "$nlist"S; then 
              : 
            else 
              grep -v "^: " < "$nlist" > "$nlist"S 
            fi 
 
            if test -f "$nlist"S; then 
              eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' 
            else 
              $echo '/* NONE */' >> "$output_objdir/$dlsyms" 
            fi 
 
            $echo >> "$output_objdir/$dlsyms" "\ 
 
#undef lt_preloaded_symbols 
 
#if defined (__STDC__) && __STDC__ 
# define lt_ptr void * 
#else 
# define lt_ptr char * 
# define const 
#endif 
 
/* The mapping between symbol names and symbols. */ 
" 
 
            case $host in 
            *cygwin* | *mingw* ) 
          $echo >> "$output_objdir/$dlsyms" "\ 
/* DATA imports from DLLs on WIN32 can't be const, because 
   runtime relocations are performed -- see ld's documentation 
   on pseudo-relocs */ 
struct { 
" 
              ;; 
            * ) 
          $echo >> "$output_objdir/$dlsyms" "\ 
const struct { 
" 
              ;; 
            esac 
 
 
          $echo >> "$output_objdir/$dlsyms" "\ 
  const char *name; 
  lt_ptr address; 
} 
lt_preloaded_symbols[] = 
{\ 
" 
 
            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" 
 
            $echo >> "$output_objdir/$dlsyms" "\ 
  {0, (lt_ptr) 0} 
}; 
 
/* This works around a problem in FreeBSD linker */ 
#ifdef FREEBSD_WORKAROUND 
static const void *lt_preloaded_setup() { 
  return lt_preloaded_symbols; 
} 
#endif 
 
#ifdef __cplusplus 
} 
#endif\ 
" 
          fi 
 
          pic_flag_for_symtable= 
          case $host in 
          # compiling the symbol table file with pic_flag works around 
          # a FreeBSD bug that causes programs to crash when -lm is 
          # linked before any other PIC object.  But we must not use 
          # pic_flag when linking with -static.  The problem exists in 
          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. 
          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) 
            case "$compile_command " in 
            *" -static "*) ;; 
            *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; 
            esac;; 
          *-*-hpux*) 
            case "$compile_command " in 
            *" -static "*) ;; 
            *) pic_flag_for_symtable=" $pic_flag";; 
            esac 
          esac 
 
          # Now compile the dynamic symbol file. 
          $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" 
          $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? 
 
          # Clean up the generated files. 
          $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" 
          $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" 
 
          # Transform the symbol file into the correct name. 
          case $host in 
          *cygwin* | *mingw* ) 
            if test -f "$output_objdir/${outputname}.def" ; then 
              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` 
              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` 
            else 
              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` 
              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` 
             fi 
            ;; 
          * ) 
            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` 
            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` 
            ;; 
          esac 
          ;; 
        *) 
          $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 
          exit $EXIT_FAILURE 
          ;; 
        esac 
      else 
        # We keep going just in case the user didn't refer to 
        # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe 
        # really was required. 
 
        # Nullify the symbol file. 
        compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` 
        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` 
       fi        fi
   
      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then      wrappers_required=yes
       case $host in
       *cegcc* | *mingw32ce*)
         # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
         wrappers_required=no
         ;;
       *cygwin* | *mingw* )
         if test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
       esac
       if test "$wrappers_required" = no; then
         # Replace the output file specification.          # Replace the output file specification.
        compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`        compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
         link_command="$compile_command$compile_rpath"          link_command="$compile_command$compile_rpath"
   
         # We have no uninstalled library dependencies, so finalize right now.          # We have no uninstalled library dependencies, so finalize right now.
        $show "$link_command"        exit_status=0
        $run eval "$link_command"        func_show_eval "$link_command" 'exit_status=$?'
        exit_status=$? 
   
           if test -n "$postlink_cmds"; then
             func_to_tool_file "$output"
             postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
             func_execute_cmds "$postlink_cmds" 'exit $?'
           fi
   
         # Delete the generated files.          # Delete the generated files.
        if test -n "$dlsyms"; then        if test -f "$output_objdir/${outputname}S.${objext}"; then
          $show "$rm $output_objdir/${outputname}S.${objext}"          func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
          $run $rm "$output_objdir/${outputname}S.${objext}" 
         fi          fi
   
         exit $exit_status          exit $exit_status
       fi        fi
   
       if test -n "$shlibpath_var"; then  
         # We should set the shlibpath_var  
         rpath=  
         for dir in $temp_rpath; do  
           case $dir in  
           [\\/]* | [A-Za-z]:[\\/]*)  
             # Absolute path.  
             rpath="$rpath$dir:"  
             ;;  
           *)  
             # Relative path: add a thisdir entry.  
             rpath="$rpath\$thisdir/$dir:"  
             ;;  
           esac  
         done  
         temp_rpath="$rpath"  
       fi  
   
       if test -n "$compile_shlibpath$finalize_shlibpath"; then        if test -n "$compile_shlibpath$finalize_shlibpath"; then
         compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"          compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
       fi        fi
Line 4771  static const void *lt_preloaded_setup() { Line 8919  static const void *lt_preloaded_setup() {
           # We should set the runpath_var.            # We should set the runpath_var.
           rpath=            rpath=
           for dir in $perm_rpath; do            for dir in $perm_rpath; do
            rpath="$rpath$dir:"            func_append rpath "$dir:"
           done            done
           compile_var="$runpath_var=\"$rpath\$$runpath_var\" "            compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
         fi          fi
Line 4779  static const void *lt_preloaded_setup() { Line 8927  static const void *lt_preloaded_setup() {
           # We should set the runpath_var.            # We should set the runpath_var.
           rpath=            rpath=
           for dir in $finalize_perm_rpath; do            for dir in $finalize_perm_rpath; do
            rpath="$rpath$dir:"            func_append rpath "$dir:"
           done            done
           finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "            finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
         fi          fi
Line 4789  static const void *lt_preloaded_setup() { Line 8937  static const void *lt_preloaded_setup() {
         # We don't need to create a wrapper script.          # We don't need to create a wrapper script.
         link_command="$compile_var$compile_command$compile_rpath"          link_command="$compile_var$compile_command$compile_rpath"
         # Replace the output file specification.          # Replace the output file specification.
        link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`        link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
         # Delete the old output file.          # Delete the old output file.
        $run $rm $output        $opt_dry_run || $RM $output
         # Link the executable and exit          # Link the executable and exit
        $show "$link_command"        func_show_eval "$link_command" 'exit $?'
        $run eval "$link_command" || exit $?
         if test -n "$postlink_cmds"; then
           func_to_tool_file "$output"
           postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
           func_execute_cmds "$postlink_cmds" 'exit $?'
         fi
 
         exit $EXIT_SUCCESS          exit $EXIT_SUCCESS
       fi        fi
   
Line 4803  static const void *lt_preloaded_setup() { Line 8957  static const void *lt_preloaded_setup() {
         link_command="$compile_var$compile_command$compile_rpath"          link_command="$compile_var$compile_command$compile_rpath"
         relink_command="$finalize_var$finalize_command$finalize_rpath"          relink_command="$finalize_var$finalize_command$finalize_rpath"
   
        $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2        func_warning "this platform does not like uninstalled shared libraries"
        $echo "$modename: \`$output' will be relinked during installation" 1>&2        func_warning "\`$output' will be relinked during installation"
       else        else
         if test "$fast_install" != no; then          if test "$fast_install" != no; then
           link_command="$finalize_var$compile_command$finalize_rpath"            link_command="$finalize_var$compile_command$finalize_rpath"
           if test "$fast_install" = yes; then            if test "$fast_install" = yes; then
            relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`            relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
           else            else
             # fast_install is set to needless              # fast_install is set to needless
             relink_command=              relink_command=
Line 4821  static const void *lt_preloaded_setup() { Line 8975  static const void *lt_preloaded_setup() {
       fi        fi
   
       # Replace the output file specification.        # Replace the output file specification.
      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
   
       # Delete the old output files.        # Delete the old output files.
      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
   
      $show "$link_command"      func_show_eval "$link_command" 'exit $?'
      $run eval "$link_command" || exit $? 
   
         if test -n "$postlink_cmds"; then
           func_to_tool_file "$output_objdir/$outputname"
           postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
           func_execute_cmds "$postlink_cmds" 'exit $?'
         fi
   
       # Now create the wrapper script.        # Now create the wrapper script.
      $show "creating $output"      func_verbose "creating $output"
   
       # Quote the relink command for shipping.        # Quote the relink command for shipping.
       if test -n "$relink_command"; then        if test -n "$relink_command"; then
         # Preserve any variables that may affect compiler behavior          # Preserve any variables that may affect compiler behavior
         for var in $variables_saved_for_relink; do          for var in $variables_saved_for_relink; do
           if eval test -z \"\${$var+set}\"; then            if eval test -z \"\${$var+set}\"; then
            relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
           elif eval var_value=\$$var; test -z "$var_value"; then            elif eval var_value=\$$var; test -z "$var_value"; then
             relink_command="$var=; export $var; $relink_command"              relink_command="$var=; export $var; $relink_command"
           else            else
            var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`            func_quote_for_eval "$var_value"
            relink_command="$var=\"$var_value\"; export $var; $relink_command"            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
           fi            fi
         done          done
         relink_command="(cd `pwd`; $relink_command)"          relink_command="(cd `pwd`; $relink_command)"
        relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`        relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
       fi        fi
   
      # Quote $echo for shipping.      # Only actually do things if not in dry run mode.
      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then      $opt_dry_run || {
        case $progpath in 
        [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; 
        *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; 
        esac 
        qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` 
      else 
        qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` 
      fi 
 
      # Only actually do things if our run command is non-null. 
      if test -z "$run"; then 
         # win32 will think the script is a binary if it has          # win32 will think the script is a binary if it has
         # a .exe suffix, so we strip it off here.          # a .exe suffix, so we strip it off here.
         case $output in          case $output in
          *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;          *.exe) func_stripname '' '.exe' "$output"
                  output=$func_stripname_result ;;
         esac          esac
         # test for cygwin because mv fails w/o .exe extensions          # test for cygwin because mv fails w/o .exe extensions
         case $host in          case $host in
           *cygwin*)            *cygwin*)
             exeext=.exe              exeext=.exe
            outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;            func_stripname '' '.exe' "$outputname"
             outputname=$func_stripname_result ;;
           *) exeext= ;;            *) exeext= ;;
         esac          esac
         case $host in          case $host in
           *cygwin* | *mingw* )            *cygwin* | *mingw* )
            output_name=`basename $output`            func_dirname_and_basename "$output" "" "."
            output_path=`dirname $output`            output_name=$func_basename_result
            cwrappersource="$output_path/$objdir/lt-$output_name.c"            output_path=$func_dirname_result
            cwrapper="$output_path/$output_name.exe"            cwrappersource="$output_path/$objdir/lt-$output_name.c"
            $rm $cwrappersource $cwrapper            cwrapper="$output_path/$output_name.exe"
            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15            $RM $cwrappersource $cwrapper
             trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
   
            cat > $cwrappersource <<EOF            func_emit_cwrapperexe_src > $cwrappersource
   
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname            # The wrapper executable is built using the $host compiler,
   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP            # because it contains $host paths and files. If cross-
             # compiling, it, like the target executable, must be
             # executed on the $host or under an emulation environment.
             $opt_dry_run || {
               $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
               $STRIP $cwrapper
             }
   
   The $output program cannot be directly executed until all the libtool            # Now, create the wrapper script for func_source use:
   libraries that it depends on are installed.            func_ltwrapper_scriptname $cwrapper
            $RM $func_ltwrapper_scriptname_result
   This wrapper executable should never be moved out of the build directory.            trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
   If it is, it will not operate correctly.            $opt_dry_run || {
              # note: this script will not be executed, so do not chmod.
   Currently, it simply execs the wrapper *script* "/bin/sh $output",              if test "x$build" = "x$host" ; then
   but could eventually absorb all of the scripts functionality and                $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
   exec $objdir/$outputname directly.              else
*/                func_emit_wrapper no > $func_ltwrapper_scriptname_result
EOF              fi
            cat >> $cwrappersource<<"EOF"            }
#include <stdio.h> 
#include <stdlib.h> 
#include <unistd.h> 
#include <malloc.h> 
#include <stdarg.h> 
#include <assert.h> 
#include <string.h> 
#include <ctype.h> 
#include <sys/stat.h> 
 
#if defined(PATH_MAX) 
# define LT_PATHMAX PATH_MAX 
#elif defined(MAXPATHLEN) 
# define LT_PATHMAX MAXPATHLEN 
#else 
# define LT_PATHMAX 1024 
#endif 
 
#ifndef DIR_SEPARATOR 
# define DIR_SEPARATOR '/' 
# define PATH_SEPARATOR ':' 
#endif 
 
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ 
  defined (__OS2__) 
# define HAVE_DOS_BASED_FILE_SYSTEM 
# ifndef DIR_SEPARATOR_2 
#  define DIR_SEPARATOR_2 '\\' 
# endif 
# ifndef PATH_SEPARATOR_2 
#  define PATH_SEPARATOR_2 ';' 
# endif 
#endif 
 
#ifndef DIR_SEPARATOR_2 
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) 
#else /* DIR_SEPARATOR_2 */ 
# define IS_DIR_SEPARATOR(ch) \ 
        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) 
#endif /* DIR_SEPARATOR_2 */ 
 
#ifndef PATH_SEPARATOR_2 
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) 
#else /* PATH_SEPARATOR_2 */ 
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) 
#endif /* PATH_SEPARATOR_2 */ 
 
#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type))) 
#define XFREE(stale) do { \ 
  if (stale) { free ((void *) stale); stale = 0; } \ 
} while (0) 
 
/* -DDEBUG is fairly common in CFLAGS.  */ 
#undef DEBUG 
#if defined DEBUGWRAPPER 
# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) 
#else 
# define DEBUG(format, ...) 
#endif 
 
const char *program_name = NULL; 
 
void * xmalloc (size_t num); 
char * xstrdup (const char *string); 
const char * base_name (const char *name); 
char * find_executable(const char *wrapper); 
int    check_executable(const char *path); 
char * strendzap(char *str, const char *pat); 
void lt_fatal (const char *message, ...); 
 
int 
main (int argc, char *argv[]) 
{ 
  char **newargz; 
  int i; 
 
  program_name = (char *) xstrdup (base_name (argv[0])); 
  DEBUG("(main) argv[0]      : %s\n",argv[0]); 
  DEBUG("(main) program_name : %s\n",program_name); 
  newargz = XMALLOC(char *, argc+2); 
EOF 
 
            cat >> $cwrappersource <<EOF 
  newargz[0] = (char *) xstrdup("$SHELL"); 
EOF 
 
            cat >> $cwrappersource <<"EOF" 
  newargz[1] = find_executable(argv[0]); 
  if (newargz[1] == NULL) 
    lt_fatal("Couldn't find %s", argv[0]); 
  DEBUG("(main) found exe at : %s\n",newargz[1]); 
  /* we know the script has the same name, without the .exe */ 
  /* so make sure newargz[1] doesn't end in .exe */ 
  strendzap(newargz[1],".exe"); 
  for (i = 1; i < argc; i++) 
    newargz[i+1] = xstrdup(argv[i]); 
  newargz[argc+1] = NULL; 
 
  for (i=0; i<argc+1; i++) 
  { 
    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]); 
    ; 
  } 
 
EOF 
 
            case $host_os in 
              mingw*) 
                cat >> $cwrappersource <<EOF 
  execv("$SHELL",(char const **)newargz); 
EOF 
              ;; 
              *) 
                cat >> $cwrappersource <<EOF 
  execv("$SHELL",newargz); 
EOF 
              ;; 
            esac 
 
            cat >> $cwrappersource <<"EOF" 
  return 127; 
} 
 
void * 
xmalloc (size_t num) 
{ 
  void * p = (void *) malloc (num); 
  if (!p) 
    lt_fatal ("Memory exhausted"); 
 
  return p; 
} 
 
char * 
xstrdup (const char *string) 
{ 
  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL 
; 
} 
 
const char * 
base_name (const char *name) 
{ 
  const char *base; 
 
#if defined (HAVE_DOS_BASED_FILE_SYSTEM) 
  /* Skip over the disk name in MSDOS pathnames. */ 
  if (isalpha ((unsigned char)name[0]) && name[1] == ':') 
    name += 2; 
#endif 
 
  for (base = name; *name; name++) 
    if (IS_DIR_SEPARATOR (*name)) 
      base = name + 1; 
  return base; 
} 
 
int 
check_executable(const char * path) 
{ 
  struct stat st; 
 
  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); 
  if ((!path) || (!*path)) 
    return 0; 
 
  if ((stat (path, &st) >= 0) && 
      ( 
        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ 
#if defined (S_IXOTH) 
       ((st.st_mode & S_IXOTH) == S_IXOTH) || 
#endif 
#if defined (S_IXGRP) 
       ((st.st_mode & S_IXGRP) == S_IXGRP) || 
#endif 
       ((st.st_mode & S_IXUSR) == S_IXUSR)) 
      ) 
    return 1; 
  else 
    return 0; 
} 
 
/* Searches for the full path of the wrapper.  Returns 
   newly allocated full path name if found, NULL otherwise */ 
char * 
find_executable (const char* wrapper) 
{ 
  int has_slash = 0; 
  const char* p; 
  const char* p_next; 
  /* static buffer for getcwd */ 
  char tmp[LT_PATHMAX + 1]; 
  int tmp_len; 
  char* concat_name; 
 
  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); 
 
  if ((wrapper == NULL) || (*wrapper == '\0')) 
    return NULL; 
 
  /* Absolute path? */ 
#if defined (HAVE_DOS_BASED_FILE_SYSTEM) 
  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') 
  { 
    concat_name = xstrdup (wrapper); 
    if (check_executable(concat_name)) 
      return concat_name; 
    XFREE(concat_name); 
  } 
  else 
  { 
#endif 
    if (IS_DIR_SEPARATOR (wrapper[0])) 
    { 
      concat_name = xstrdup (wrapper); 
      if (check_executable(concat_name)) 
        return concat_name; 
      XFREE(concat_name); 
    } 
#if defined (HAVE_DOS_BASED_FILE_SYSTEM) 
  } 
#endif 
 
  for (p = wrapper; *p; p++) 
    if (*p == '/') 
    { 
      has_slash = 1; 
      break; 
    } 
  if (!has_slash) 
  { 
    /* no slashes; search PATH */ 
    const char* path = getenv ("PATH"); 
    if (path != NULL) 
    { 
      for (p = path; *p; p = p_next) 
      { 
        const char* q; 
        size_t p_len; 
        for (q = p; *q; q++) 
          if (IS_PATH_SEPARATOR(*q)) 
            break; 
        p_len = q - p; 
        p_next = (*q == '\0' ? q : q + 1); 
        if (p_len == 0) 
        { 
          /* empty path: current directory */ 
          if (getcwd (tmp, LT_PATHMAX) == NULL) 
            lt_fatal ("getcwd failed"); 
          tmp_len = strlen(tmp); 
          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); 
          memcpy (concat_name, tmp, tmp_len); 
          concat_name[tmp_len] = '/'; 
          strcpy (concat_name + tmp_len + 1, wrapper); 
        } 
        else 
        { 
          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); 
          memcpy (concat_name, p, p_len); 
          concat_name[p_len] = '/'; 
          strcpy (concat_name + p_len + 1, wrapper); 
        } 
        if (check_executable(concat_name)) 
          return concat_name; 
        XFREE(concat_name); 
      } 
    } 
    /* not found in PATH; assume curdir */ 
  } 
  /* Relative path | not found in path: prepend cwd */ 
  if (getcwd (tmp, LT_PATHMAX) == NULL) 
    lt_fatal ("getcwd failed"); 
  tmp_len = strlen(tmp); 
  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); 
  memcpy (concat_name, tmp, tmp_len); 
  concat_name[tmp_len] = '/'; 
  strcpy (concat_name + tmp_len + 1, wrapper); 
 
  if (check_executable(concat_name)) 
    return concat_name; 
  XFREE(concat_name); 
  return NULL; 
} 
 
char * 
strendzap(char *str, const char *pat) 
{ 
  size_t len, patlen; 
 
  assert(str != NULL); 
  assert(pat != NULL); 
 
  len = strlen(str); 
  patlen = strlen(pat); 
 
  if (patlen <= len) 
  { 
    str += len - patlen; 
    if (strcmp(str, pat) == 0) 
      *str = '\0'; 
  } 
  return str; 
} 
 
static void 
lt_error_core (int exit_status, const char * mode, 
          const char * message, va_list ap) 
{ 
  fprintf (stderr, "%s: %s: ", program_name, mode); 
  vfprintf (stderr, message, ap); 
  fprintf (stderr, ".\n"); 
 
  if (exit_status >= 0) 
    exit (exit_status); 
} 
 
void 
lt_fatal (const char *message, ...) 
{ 
  va_list ap; 
  va_start (ap, message); 
  lt_error_core (EXIT_FAILURE, "FATAL", message, ap); 
  va_end (ap); 
} 
EOF 
          # we should really use a build-platform specific compiler 
          # here, but OTOH, the wrappers (shell script and this C one) 
          # are only useful if you want to execute the "real" binary. 
          # Since the "real" binary is built for $host, then this 
          # wrapper might as well be built for $host, too. 
          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource 
          ;; 
        esac 
        $rm $output 
        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 
 
        $echo > $output "\ 
#! $SHELL 
 
# $output - temporary wrapper script for $objdir/$outputname 
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP 
# 
# The $output program cannot be directly executed until all the libtool 
# libraries that it depends on are installed. 
# 
# This wrapper script should never be moved out of the build directory. 
# If it is, it will not operate correctly. 
 
# Sed substitution that helps us do robust quoting.  It backslashifies 
# metacharacters that are still active within double-quoted strings. 
Xsed='${SED} -e 1s/^X//' 
sed_quote_subst='$sed_quote_subst' 
 
# The HP-UX ksh and POSIX shell print the target directory to stdout 
# if CDPATH is set. 
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH 
 
relink_command=\"$relink_command\" 
 
# This environment variable determines our operation mode. 
if test \"\$libtool_install_magic\" = \"$magic\"; then 
  # install mode needs the following variable: 
  notinst_deplibs='$notinst_deplibs' 
else 
  # When we are sourced in execute mode, \$file and \$echo are already set. 
  if test \"\$libtool_execute_magic\" != \"$magic\"; then 
    echo=\"$qecho\" 
    file=\"\$0\" 
    # Make sure echo works. 
    if test \"X\$1\" = X--no-reexec; then 
      # Discard the --no-reexec flag, and continue. 
      shift 
    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then 
      # Yippee, \$echo works! 
      : 
    else 
      # Restart under the correct shell, and then maybe \$echo will work. 
      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} 
    fi 
  fi\ 
" 
        $echo >> $output "\ 
 
  # Find the directory that this script lives in. 
  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` 
  test \"x\$thisdir\" = \"x\$file\" && thisdir=. 
 
  # Follow symbolic links until we get to the real thisdir. 
  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` 
  while test -n \"\$file\"; do 
    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` 
 
    # If there was a directory component, then change thisdir. 
    if test \"x\$destdir\" != \"x\$file\"; then 
      case \"\$destdir\" in 
      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; 
      *) thisdir=\"\$thisdir/\$destdir\" ;; 
      esac 
    fi 
 
    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` 
    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` 
  done 
 
  # Try to get the absolute directory name. 
  absdir=\`cd \"\$thisdir\" && pwd\` 
  test -n \"\$absdir\" && thisdir=\"\$absdir\" 
" 
 
        if test "$fast_install" = yes; then 
          $echo >> $output "\ 
  program=lt-'$outputname'$exeext 
  progdir=\"\$thisdir/$objdir\" 
 
  if test ! -f \"\$progdir/\$program\" || \\ 
     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ 
       test \"X\$file\" != \"X\$progdir/\$program\"; }; then 
 
    file=\"\$\$-\$program\" 
 
    if test ! -d \"\$progdir\"; then 
      $mkdir \"\$progdir\" 
    else 
      $rm \"\$progdir/\$file\" 
    fi" 
 
          $echo >> $output "\ 
 
    # relink executable if necessary 
    if test -n \"\$relink_command\"; then 
      if relink_command_output=\`eval \$relink_command 2>&1\`; then : 
      else 
        $echo \"\$relink_command_output\" >&2 
        $rm \"\$progdir/\$file\" 
        exit $EXIT_FAILURE 
      fi 
    fi 
 
    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || 
    { $rm \"\$progdir/\$program\"; 
      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } 
    $rm \"\$progdir/\$file\" 
  fi" 
        else 
          $echo >> $output "\ 
  program='$outputname' 
  progdir=\"\$thisdir/$objdir\" 
" 
        fi 
 
        $echo >> $output "\ 
 
  if test -f \"\$progdir/\$program\"; then" 
 
        # Export our shlibpath_var if we have one. 
        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then 
          $echo >> $output "\ 
    # Add our own library path to $shlibpath_var 
    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" 
 
    # Some systems cannot cope with colon-terminated $shlibpath_var 
    # The second colon is a workaround for a bug in BeOS R4 sed 
    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` 
 
    export $shlibpath_var 
" 
        fi 
 
        # fixup the dll searchpath if we need to. 
        if test -n "$dllsearchpath"; then 
          $echo >> $output "\ 
    # Add the dll search path components to the executable PATH 
    PATH=$dllsearchpath:\$PATH 
" 
        fi 
 
        $echo >> $output "\ 
    if test \"\$libtool_execute_magic\" != \"$magic\"; then 
      # Run the actual program with our arguments. 
" 
        case $host in 
        # Backslashes separate directories on plain windows 
        *-*-mingw | *-*-os2*) 
          $echo >> $output "\ 
      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} 
" 
           ;;            ;;
             * )
               $RM $output
               trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
   
        *)            func_emit_wrapper no > $output
          $echo >> $output "\            chmod +x $output
      exec \"\$progdir/\$program\" \${1+\"\$@\"} 
" 
           ;;            ;;
         esac          esac
        $echo >> $output "\      }
      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" 
      exit $EXIT_FAILURE 
    fi 
  else 
    # The program doesn't exist. 
    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 
    \$echo \"This script is just a wrapper for \$program.\" 1>&2 
    $echo \"See the $PACKAGE documentation for more information.\" 1>&2 
    exit $EXIT_FAILURE 
  fi 
fi\ 
" 
        chmod +x $output 
      fi 
       exit $EXIT_SUCCESS        exit $EXIT_SUCCESS
       ;;        ;;
     esac      esac
Line 5417  fi\ Line 9075  fi\
     for oldlib in $oldlibs; do      for oldlib in $oldlibs; do
   
       if test "$build_libtool_libs" = convenience; then        if test "$build_libtool_libs" = convenience; then
        oldobjs="$libobjs_save"        oldobjs="$libobjs_save $symfileobj"
         addlibs="$convenience"          addlibs="$convenience"
         build_libtool_libs=no          build_libtool_libs=no
       else        else
Line 5426  fi\ Line 9084  fi\
           build_libtool_libs=no            build_libtool_libs=no
         else          else
           oldobjs="$old_deplibs $non_pic_objects"            oldobjs="$old_deplibs $non_pic_objects"
             if test "$preload" = yes && test -f "$symfileobj"; then
               func_append oldobjs " $symfileobj"
             fi
         fi          fi
         addlibs="$old_convenience"          addlibs="$old_convenience"
       fi        fi
   
       if test -n "$addlibs"; then        if test -n "$addlibs"; then
         gentop="$output_objdir/${outputname}x"          gentop="$output_objdir/${outputname}x"
        generated="$generated $gentop"        func_append generated " $gentop"
   
         func_extract_archives $gentop $addlibs          func_extract_archives $gentop $addlibs
        oldobjs="$oldobjs $func_extract_archives_result"        func_append oldobjs " $func_extract_archives_result"
       fi        fi
   
       # Do each command in the archive commands.        # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then        if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
       cmds=$old_archive_from_new_cmds        cmds=$old_archive_from_new_cmds
       else        else
   
           # Add any objects from preloaded convenience libraries
           if test -n "$dlprefiles"; then
             gentop="$output_objdir/${outputname}x"
             func_append generated " $gentop"
   
             func_extract_archives $gentop $dlprefiles
             func_append oldobjs " $func_extract_archives_result"
           fi
   
         # POSIX demands no paths to be encoded in archives.  We have          # POSIX demands no paths to be encoded in archives.  We have
         # to avoid creating archives with duplicate basenames if we          # to avoid creating archives with duplicate basenames if we
         # might have to extract them afterwards, e.g., when creating a          # might have to extract them afterwards, e.g., when creating a
Line 5450  fi\ Line 9121  fi\
         # not supported by libtool).          # not supported by libtool).
         if (for obj in $oldobjs          if (for obj in $oldobjs
             do              do
              $echo "X$obj" | $Xsed -e 's%^.*/%%'              func_basename "$obj"
               $ECHO "$func_basename_result"
             done | sort | sort -uc >/dev/null 2>&1); then              done | sort | sort -uc >/dev/null 2>&1); then
           :            :
         else          else
          $echo "copying selected object files to avoid basename conflicts..."          echo "copying selected object files to avoid basename conflicts..."
          gentop="$output_objdir/${outputname}x"
          if test -z "$gentop"; then          func_append generated " $gentop"
            gentop="$output_objdir/${outputname}x"          func_mkdir_p "$gentop"
            generated="$generated $gentop" 
 
            $show "${rm}r $gentop" 
            $run ${rm}r "$gentop" 
            $show "$mkdir $gentop" 
            $run $mkdir "$gentop" 
            exit_status=$? 
            if test "$exit_status" -ne 0 && test ! -d "$gentop"; then 
              exit $exit_status 
            fi 
          fi 
 
           save_oldobjs=$oldobjs            save_oldobjs=$oldobjs
           oldobjs=            oldobjs=
           counter=1            counter=1
           for obj in $save_oldobjs            for obj in $save_oldobjs
           do            do
            objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`            func_basename "$obj"
             objbase="$func_basename_result"
             case " $oldobjs " in              case " $oldobjs " in
             " ") oldobjs=$obj ;;              " ") oldobjs=$obj ;;
             *[\ /]"$objbase "*)              *[\ /]"$objbase "*)
Line 5483  fi\ Line 9144  fi\
                 # Make sure we don't pick an alternate name that also                  # Make sure we don't pick an alternate name that also
                 # overlaps.                  # overlaps.
                 newobj=lt$counter-$objbase                  newobj=lt$counter-$objbase
                counter=`expr $counter + 1`                func_arith $counter + 1
                 counter=$func_arith_result
                 case " $oldobjs " in                  case " $oldobjs " in
                 *[\ /]"$newobj "*) ;;                  *[\ /]"$newobj "*) ;;
                 *) if test ! -f "$gentop/$newobj"; then break; fi ;;                  *) if test ! -f "$gentop/$newobj"; then break; fi ;;
                 esac                  esac
               done                done
              $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
              $run ln "$obj" "$gentop/$newobj" ||              func_append oldobjs " $gentop/$newobj"
              $run cp "$obj" "$gentop/$newobj" 
              oldobjs="$oldobjs $gentop/$newobj" 
               ;;                ;;
            *) oldobjs="$oldobjs $obj" ;;            *) func_append oldobjs " $obj" ;;
             esac              esac
           done            done
         fi          fi
   
         eval cmds=\"$old_archive_cmds\"          eval cmds=\"$old_archive_cmds\"
   
        if len=`expr "X$cmds" : ".*"` &&        func_len " $cmds"
             test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then        len=$func_len_result
         if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
           cmds=$old_archive_cmds            cmds=$old_archive_cmds
           elif test -n "$archiver_list_spec"; then
             func_verbose "using command file archive linking..."
             for obj in $oldobjs
             do
               func_to_tool_file "$obj"
               $ECHO "$func_to_tool_file_result"
             done > $output_objdir/$libname.libcmd
             func_to_tool_file "$output_objdir/$libname.libcmd"
             oldobjs=" $archiver_list_spec$func_to_tool_file_result"
             cmds=$old_archive_cmds
         else          else
           # the command line is too long to link in one step, link in parts            # the command line is too long to link in one step, link in parts
          $echo "using piecewise archive linking..."          func_verbose "using piecewise archive linking..."
           save_RANLIB=$RANLIB            save_RANLIB=$RANLIB
           RANLIB=:            RANLIB=:
           objlist=            objlist=
           concat_cmds=            concat_cmds=
           save_oldobjs=$oldobjs            save_oldobjs=$oldobjs
          oldobjs=
           # Is there a better way of finding the last object in the list?            # Is there a better way of finding the last object in the list?
           for obj in $save_oldobjs            for obj in $save_oldobjs
           do            do
             last_oldobj=$obj              last_oldobj=$obj
           done            done
             eval test_cmds=\"$old_archive_cmds\"
             func_len " $test_cmds"
             len0=$func_len_result
             len=$len0
           for obj in $save_oldobjs            for obj in $save_oldobjs
           do            do
            oldobjs="$objlist $obj"            func_len " $obj"
            objlist="$objlist $obj"            func_arith $len + $func_len_result
            eval test_cmds=\"$old_archive_cmds\"            len=$func_arith_result
            if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&            func_append objlist " $obj"
               test "$len" -le "$max_cmd_len"; then            if test "$len" -lt "$max_cmd_len"; then
               :                :
             else              else
               # the above command should be used before it gets too long                # the above command should be used before it gets too long
               oldobjs=$objlist                oldobjs=$objlist
               if test "$obj" = "$last_oldobj" ; then                if test "$obj" = "$last_oldobj" ; then
                RANLIB=$save_RANLIB                RANLIB=$save_RANLIB
               fi                fi
               test -z "$concat_cmds" || concat_cmds=$concat_cmds~                test -z "$concat_cmds" || concat_cmds=$concat_cmds~
               eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"                eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
               objlist=                objlist=
                 len=$len0
             fi              fi
           done            done
           RANLIB=$save_RANLIB            RANLIB=$save_RANLIB
Line 5546  fi\ Line 9221  fi\
           fi            fi
         fi          fi
       fi        fi
      save_ifs="$IFS"; IFS='~'      func_execute_cmds "$cmds" 'exit $?'
      for cmd in $cmds; do 
        eval cmd=\"$cmd\" 
        IFS="$save_ifs" 
        $show "$cmd" 
        $run eval "$cmd" || exit $? 
      done 
      IFS="$save_ifs" 
     done      done
   
    if test -n "$generated"; then    test -n "$generated" && \
      $show "${rm}r$generated"      func_show_eval "${RM}r$generated"
      $run ${rm}r$generated 
    fi 
   
     # Now create the libtool archive.      # Now create the libtool archive.
     case $output in      case $output in
     *.la)      *.la)
       old_library=        old_library=
       test "$build_old_libs" = yes && old_library="$libname.$libext"        test "$build_old_libs" = yes && old_library="$libname.$libext"
      $show "creating $output"      func_verbose "creating $output"
   
       # Preserve any variables that may affect compiler behavior        # Preserve any variables that may affect compiler behavior
       for var in $variables_saved_for_relink; do        for var in $variables_saved_for_relink; do
         if eval test -z \"\${$var+set}\"; then          if eval test -z \"\${$var+set}\"; then
          relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
         elif eval var_value=\$$var; test -z "$var_value"; then          elif eval var_value=\$$var; test -z "$var_value"; then
           relink_command="$var=; export $var; $relink_command"            relink_command="$var=; export $var; $relink_command"
         else          else
          var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`          func_quote_for_eval "$var_value"
          relink_command="$var=\"$var_value\"; export $var; $relink_command"          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
         fi          fi
       done        done
       # Quote the link command for shipping.        # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"        relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then        if test "$hardcode_automatic" = yes ; then
         relink_command=          relink_command=
       fi        fi
   
   
       # Only create the output if not a dry run.        # Only create the output if not a dry run.
      if test -z "$run"; then      $opt_dry_run || {
         for installed in no yes; do          for installed in no yes; do
           if test "$installed" = yes; then            if test "$installed" = yes; then
             if test -z "$install_libdir"; then              if test -z "$install_libdir"; then
Line 5600  fi\ Line 9265  fi\
             for deplib in $dependency_libs; do              for deplib in $dependency_libs; do
               case $deplib in                case $deplib in
               *.la)                *.la)
                name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`                func_basename "$deplib"
                 name="$func_basename_result"
                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                if test -z "$libdir"; then                test -z "$libdir" && \
                  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2                  func_fatal_error "\`$deplib' is not a valid libtool archive"
                  exit $EXIT_FAILURE                func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
                fi 
                newdependency_libs="$newdependency_libs $libdir/$name" 
                 ;;                  ;;
              *) newdependency_libs="$newdependency_libs $deplib" ;;              -L*)
                 func_stripname -L '' "$deplib"
                 func_replace_sysroot "$func_stripname_result"
                 func_append newdependency_libs " -L$func_replace_sysroot_result"
                 ;;
               -R*)
                 func_stripname -R '' "$deplib"
                 func_replace_sysroot "$func_stripname_result"
                 func_append newdependency_libs " -R$func_replace_sysroot_result"
                 ;;
               *) func_append newdependency_libs " $deplib" ;;
               esac                esac
             done              done
             dependency_libs="$newdependency_libs"              dependency_libs="$newdependency_libs"
             newdlfiles=              newdlfiles=
   
             for lib in $dlfiles; do              for lib in $dlfiles; do
              name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`              case $lib in
              eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`              *.la)
              if test -z "$libdir"; then                func_basename "$lib"
                $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2                name="$func_basename_result"
                exit $EXIT_FAILURE                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
              fi                test -z "$libdir" && \
              newdlfiles="$newdlfiles $libdir/$name"                  func_fatal_error "\`$lib' is not a valid libtool archive"
                 func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
                 ;;
               *) func_append newdlfiles " $lib" ;;
               esac
             done              done
             dlfiles="$newdlfiles"              dlfiles="$newdlfiles"
             newdlprefiles=              newdlprefiles=
             for lib in $dlprefiles; do              for lib in $dlprefiles; do
              name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`              case $lib in
              eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`              *.la)
              if test -z "$libdir"; then                # Only pass preopened files to the pseudo-archive (for
                $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2                # eventual linking with the app. that links it) if we
                exit $EXIT_FAILURE                # didn't already link the preopened objects directly into
              fi                # the library:
              newdlprefiles="$newdlprefiles $libdir/$name"                func_basename "$lib"
                 name="$func_basename_result"
                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
                 test -z "$libdir" && \
                   func_fatal_error "\`$lib' is not a valid libtool archive"
                 func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
                 ;;
               esac
             done              done
             dlprefiles="$newdlprefiles"              dlprefiles="$newdlprefiles"
           else            else
Line 5641  fi\ Line 9327  fi\
                 [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;                  [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                 *) abs=`pwd`"/$lib" ;;                  *) abs=`pwd`"/$lib" ;;
               esac                esac
              newdlfiles="$newdlfiles $abs"              func_append newdlfiles " $abs"
             done              done
             dlfiles="$newdlfiles"              dlfiles="$newdlfiles"
             newdlprefiles=              newdlprefiles=
Line 5650  fi\ Line 9336  fi\
                 [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;                  [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
                 *) abs=`pwd`"/$lib" ;;                  *) abs=`pwd`"/$lib" ;;
               esac                esac
              newdlprefiles="$newdlprefiles $abs"              func_append newdlprefiles " $abs"
             done              done
             dlprefiles="$newdlprefiles"              dlprefiles="$newdlprefiles"
           fi            fi
          $rm $output          $RM $output
           # place dlname in correct position for cygwin            # place dlname in correct position for cygwin
             # In fact, it would be nice if we could use this code for all target
             # systems that can't hard-code library paths into their executables
             # and that have no shared library path variable independent of PATH,
             # but it turns out we can't easily determine that from inspecting
             # libtool variables, so we have to hard-code the OSs to which it
             # applies here; at the moment, that means platforms that use the PE
             # object format with DLL files.  See the long comment at the top of
             # tests/bindir.at for full details.
           tdlname=$dlname            tdlname=$dlname
           case $host,$output,$installed,$module,$dlname in            case $host,$output,$installed,$module,$dlname in
            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
               # If a -bindir argument was supplied, place the dll there.
               if test "x$bindir" != x ;
               then
                 func_relative_path "$install_libdir" "$bindir"
                 tdlname=$func_relative_path_result$dlname
               else
                 # Otherwise fall back on heuristic.
                 tdlname=../bin/$dlname
               fi
               ;;
           esac            esac
          $echo > $output "\          $ECHO > $output "\
 # $outputname - a libtool library file  # $outputname - a libtool library file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #  #
 # Please DO NOT delete this file!  # Please DO NOT delete this file!
 # It is necessary for linking the library.  # It is necessary for linking the library.
Line 5676  library_names='$library_names' Line 9380  library_names='$library_names'
 # The name of the static archive.  # The name of the static archive.
 old_library='$old_library'  old_library='$old_library'
   
   # Linker flags that can not go in dependency_libs.
   inherited_linker_flags='$new_inherited_linker_flags'
   
 # Libraries that this one depends upon.  # Libraries that this one depends upon.
 dependency_libs='$dependency_libs'  dependency_libs='$dependency_libs'
   
   # Names of additional weak libraries provided by this library
   weak_library_names='$weak_libs'
   
 # Version information for $libname.  # Version information for $libname.
 current=$current  current=$current
 age=$age  age=$age
Line 5697  dlpreopen='$dlprefiles' Line 9407  dlpreopen='$dlprefiles'
 # Directory that this library needs to be installed in:  # Directory that this library needs to be installed in:
 libdir='$install_libdir'"  libdir='$install_libdir'"
           if test "$installed" = no && test "$need_relink" = yes; then            if test "$installed" = no && test "$need_relink" = yes; then
            $echo >> $output "\            $ECHO >> $output "\
 relink_command=\"$relink_command\""  relink_command=\"$relink_command\""
           fi            fi
         done          done
      fi      }
   
       # Do a symbolic link so that the libtool archive can be found in        # Do a symbolic link so that the libtool archive can be found in
       # LD_LIBRARY_PATH before the program is installed.        # LD_LIBRARY_PATH before the program is installed.
      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? 
       ;;        ;;
     esac      esac
     exit $EXIT_SUCCESS      exit $EXIT_SUCCESS
    ;;}
   
  # libtool install mode{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
  install)    func_mode_link ${1+"$@"}
    modename="$modename: install" 
   
     # There may be an optional sh(1) argument at the beginning of  
     # install_prog (especially on Windows NT).  
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||  
        # Allow the use of GNU shtool's install command.  
        $echo "X$nonopt" | grep shtool > /dev/null; then  
       # Aesthetically quote it.  
       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`  
       case $arg in  
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")  
         arg="\"$arg\""  
         ;;  
       esac  
       install_prog="$arg "  
       arg="$1"  
       shift  
     else  
       install_prog=  
       arg=$nonopt  
     fi  
   
    # The real first argument should be the name of the installation program.# func_mode_uninstall arg...
    # Aesthetically quote it.func_mode_uninstall ()
    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`{
    case $arg in    $opt_debug
    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")    RM="$nonopt"
      arg="\"$arg\"" 
      ;; 
    esac 
    install_prog="$install_prog$arg" 
 
    # We need to accept at least all the BSD install flags. 
    dest= 
     files=      files=
     opts=  
     prev=  
     install_type=  
     isdir=no  
     stripme=  
     for arg  
     do  
       if test -n "$dest"; then  
         files="$files $dest"  
         dest=$arg  
         continue  
       fi  
   
       case $arg in  
       -d) isdir=yes ;;  
       -f)   
         case " $install_prog " in  
         *[\\\ /]cp\ *) ;;  
         *) prev=$arg ;;  
         esac  
         ;;  
       -g | -m | -o) prev=$arg ;;  
       -s)  
         stripme=" -s"  
         continue  
         ;;  
       -*)  
         ;;  
       *)  
         # If the previous option needed an argument, then skip it.  
         if test -n "$prev"; then  
           prev=  
         else  
           dest=$arg  
           continue  
         fi  
         ;;  
       esac  
   
       # Aesthetically quote the argument.  
       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`  
       case $arg in  
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")  
         arg="\"$arg\""  
         ;;  
       esac  
       install_prog="$install_prog $arg"  
     done  
   
     if test -z "$install_prog"; then  
       $echo "$modename: you must specify an install program" 1>&2  
       $echo "$help" 1>&2  
       exit $EXIT_FAILURE  
     fi  
   
     if test -n "$prev"; then  
       $echo "$modename: the \`$prev' option requires an argument" 1>&2  
       $echo "$help" 1>&2  
       exit $EXIT_FAILURE  
     fi  
   
     if test -z "$files"; then  
       if test -z "$dest"; then  
         $echo "$modename: no file or destination specified" 1>&2  
       else  
         $echo "$modename: you must specify a destination" 1>&2  
       fi  
       $echo "$help" 1>&2  
       exit $EXIT_FAILURE  
     fi  
   
     # Strip any trailing slash from the destination.  
     dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`  
   
     # Check to see that the destination is a directory.  
     test -d "$dest" && isdir=yes  
     if test "$isdir" = yes; then  
       destdir="$dest"  
       destname=  
     else  
       destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`  
       test "X$destdir" = "X$dest" && destdir=.  
       destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`  
   
       # Not a directory, so check to see that there is only one file specified.  
       set dummy $files  
       if test "$#" -gt 2; then  
         $echo "$modename: \`$dest' is not a directory" 1>&2  
         $echo "$help" 1>&2  
         exit $EXIT_FAILURE  
       fi  
     fi  
     case $destdir in  
     [\\/]* | [A-Za-z]:[\\/]*) ;;  
     *)  
       for file in $files; do  
         case $file in  
         *.lo) ;;  
         *)  
           $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2  
           $echo "$help" 1>&2  
           exit $EXIT_FAILURE  
           ;;  
         esac  
       done  
       ;;  
     esac  
   
     # This variable tells wrapper scripts just to set variables rather  
     # than running their programs.  
     libtool_install_magic="$magic"  
   
     staticlibs=  
     future_libdirs=  
     current_libdirs=  
     for file in $files; do  
   
       # Do each installation.  
       case $file in  
       *.$libext)  
         # Do the static libraries later.  
         staticlibs="$staticlibs $file"  
         ;;  
   
       *.la)  
         # Check to see that this really is a libtool archive.  
         if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :  
         else  
           $echo "$modename: \`$file' is not a valid libtool archive" 1>&2  
           $echo "$help" 1>&2  
           exit $EXIT_FAILURE  
         fi  
   
         library_names=  
         old_library=  
         relink_command=  
         # If there is no directory component, then add one.  
         case $file in  
         */* | *\\*) . $file ;;  
         *) . ./$file ;;  
         esac  
   
         # Add the libdir to current_libdirs if it is the destination.  
         if test "X$destdir" = "X$libdir"; then  
           case "$current_libdirs " in  
           *" $libdir "*) ;;  
           *) current_libdirs="$current_libdirs $libdir" ;;  
           esac  
         else  
           # Note the libdir as a future libdir.  
           case "$future_libdirs " in  
           *" $libdir "*) ;;  
           *) future_libdirs="$future_libdirs $libdir" ;;  
           esac  
         fi  
   
         dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/  
         test "X$dir" = "X$file/" && dir=  
         dir="$dir$objdir"  
   
         if test -n "$relink_command"; then  
           # Determine the prefix the user has applied to our future dir.  
           inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`  
   
           # Don't allow the user to place us outside of our expected  
           # location b/c this prevents finding dependent libraries that  
           # are installed to the same prefix.  
           # At present, this check doesn't affect windows .dll's that  
           # are installed into $libdir/../bin (currently, that works fine)  
           # but it's something to keep an eye on.  
           if test "$inst_prefix_dir" = "$destdir"; then  
             $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2  
             exit $EXIT_FAILURE  
           fi  
   
           if test -n "$inst_prefix_dir"; then  
             # Stick the inst_prefix_dir data into the link command.  
             relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`  
           else  
             relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`  
           fi  
   
           $echo "$modename: warning: relinking \`$file'" 1>&2  
           $show "$relink_command"  
           if $run eval "$relink_command"; then :  
           else  
             $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2  
             exit $EXIT_FAILURE  
           fi  
         fi  
   
         # See the names of the shared library.  
         set dummy $library_names  
         if test -n "$2"; then  
           realname="$2"  
           shift  
           shift  
   
           srcname="$realname"  
           test -n "$relink_command" && srcname="$realname"T  
   
           # Install the shared library and build the symlinks.  
           $show "$install_prog $dir/$srcname $destdir/$realname"  
           $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?  
           if test -n "$stripme" && test -n "$striplib"; then  
             $show "$striplib $destdir/$realname"  
             $run eval "$striplib $destdir/$realname" || exit $?  
           fi  
   
           if test "$#" -gt 0; then  
             # Delete the old symlinks, and create new ones.  
             # Try `ln -sf' first, because the `ln' binary might depend on  
             # the symlink we replace!  Solaris /bin/ln does not understand -f,  
             # so we also need to try rm && ln -s.  
             for linkname  
             do  
               if test "$linkname" != "$realname"; then  
                 $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"  
                 $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"  
               fi  
             done  
           fi  
   
           # Do each command in the postinstall commands.  
           lib="$destdir/$realname"  
           cmds=$postinstall_cmds  
           save_ifs="$IFS"; IFS='~'  
           for cmd in $cmds; do  
             IFS="$save_ifs"  
             eval cmd=\"$cmd\"  
             $show "$cmd"  
             $run eval "$cmd" || {  
               lt_exit=$?  
   
               # Restore the uninstalled library and exit  
               if test "$mode" = relink; then  
                 $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'  
               fi  
   
               exit $lt_exit  
             }  
           done  
           IFS="$save_ifs"  
         fi  
   
         # Install the pseudo-library for information purposes.  
         name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`  
         instname="$dir/$name"i  
         $show "$install_prog $instname $destdir/$name"  
         $run eval "$install_prog $instname $destdir/$name" || exit $?  
   
         # Maybe install the static library, too.  
         test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"  
         ;;  
   
       *.lo)  
         # Install (i.e. copy) a libtool object.  
   
         # Figure out destination file name, if it wasn't already specified.  
         if test -n "$destname"; then  
           destfile="$destdir/$destname"  
         else  
           destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`  
           destfile="$destdir/$destfile"  
         fi  
   
         # Deduce the name of the destination old-style object file.  
         case $destfile in  
         *.lo)  
           staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`  
           ;;  
         *.$objext)  
           staticdest="$destfile"  
           destfile=  
           ;;  
         *)  
           $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2  
           $echo "$help" 1>&2  
           exit $EXIT_FAILURE  
           ;;  
         esac  
   
         # Install the libtool object if requested.  
         if test -n "$destfile"; then  
           $show "$install_prog $file $destfile"  
           $run eval "$install_prog $file $destfile" || exit $?  
         fi  
   
         # Install the old object if enabled.  
         if test "$build_old_libs" = yes; then  
           # Deduce the name of the old-style object file.  
           staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`  
   
           $show "$install_prog $staticobj $staticdest"  
           $run eval "$install_prog \$staticobj \$staticdest" || exit $?  
         fi  
         exit $EXIT_SUCCESS  
         ;;  
   
       *)  
         # Figure out destination file name, if it wasn't already specified.  
         if test -n "$destname"; then  
           destfile="$destdir/$destname"  
         else  
           destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`  
           destfile="$destdir/$destfile"  
         fi  
   
         # If the file is missing, and there is a .exe on the end, strip it  
         # because it is most likely a libtool script we actually want to  
         # install  
         stripped_ext=""  
         case $file in  
           *.exe)  
             if test ! -f "$file"; then  
               file=`$echo $file|${SED} 's,.exe$,,'`  
               stripped_ext=".exe"  
             fi  
             ;;  
         esac  
   
         # Do a test to see if this is really a libtool program.  
         case $host in  
         *cygwin*|*mingw*)  
             wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`  
             ;;  
         *)  
             wrapper=$file  
             ;;  
         esac  
         if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then  
           notinst_deplibs=  
           relink_command=  
   
           # Note that it is not necessary on cygwin/mingw to append a dot to  
           # foo even if both foo and FILE.exe exist: automatic-append-.exe  
           # behavior happens only for exec(3), not for open(2)!  Also, sourcing  
           # `FILE.' does not work on cygwin managed mounts.  
           #  
           # If there is no directory component, then add one.  
           case $wrapper in  
           */* | *\\*) . ${wrapper} ;;  
           *) . ./${wrapper} ;;  
           esac  
   
           # Check the variables that should have been set.  
           if test -z "$notinst_deplibs"; then  
             $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2  
             exit $EXIT_FAILURE  
           fi  
   
           finalize=yes  
           for lib in $notinst_deplibs; do  
             # Check to see that each library is installed.  
             libdir=  
             if test -f "$lib"; then  
               # If there is no directory component, then add one.  
               case $lib in  
               */* | *\\*) . $lib ;;  
               *) . ./$lib ;;  
               esac  
             fi  
             libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test  
             if test -n "$libdir" && test ! -f "$libfile"; then  
               $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2  
               finalize=no  
             fi  
           done  
   
           relink_command=  
           # Note that it is not necessary on cygwin/mingw to append a dot to  
           # foo even if both foo and FILE.exe exist: automatic-append-.exe  
           # behavior happens only for exec(3), not for open(2)!  Also, sourcing  
           # `FILE.' does not work on cygwin managed mounts.  
           #  
           # If there is no directory component, then add one.  
           case $wrapper in  
           */* | *\\*) . ${wrapper} ;;  
           *) . ./${wrapper} ;;  
           esac  
   
           outputname=  
           if test "$fast_install" = no && test -n "$relink_command"; then  
             if test "$finalize" = yes && test -z "$run"; then  
               tmpdir=`func_mktempdir`  
               file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`  
               outputname="$tmpdir/$file"  
               # Replace the output file specification.  
               relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`  
   
               $show "$relink_command"  
               if $run eval "$relink_command"; then :  
               else  
                 $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2  
                 ${rm}r "$tmpdir"  
                 continue  
               fi  
               file="$outputname"  
             else  
               $echo "$modename: warning: cannot relink \`$file'" 1>&2  
             fi  
           else  
             # Install the binary that we compiled earlier.  
             file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`  
           fi  
         fi  
   
         # remove .exe since cygwin /usr/bin/install will append another  
         # one anyway   
         case $install_prog,$host in  
         */usr/bin/install*,*cygwin*)  
           case $file:$destfile in  
           *.exe:*.exe)  
             # this is ok  
             ;;  
           *.exe:*)  
             destfile=$destfile.exe  
             ;;  
           *:*.exe)  
             destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`  
             ;;  
           esac  
           ;;  
         esac  
         $show "$install_prog$stripme $file $destfile"  
         $run eval "$install_prog\$stripme \$file \$destfile" || exit $?  
         test -n "$outputname" && ${rm}r "$tmpdir"  
         ;;  
       esac  
     done  
   
     for file in $staticlibs; do  
       name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`  
   
       # Set up the ranlib parameters.  
       oldlib="$destdir/$name"  
   
       $show "$install_prog $file $oldlib"  
       $run eval "$install_prog \$file \$oldlib" || exit $?  
   
       if test -n "$stripme" && test -n "$old_striplib"; then  
         $show "$old_striplib $oldlib"  
         $run eval "$old_striplib $oldlib" || exit $?  
       fi  
   
       # Do each command in the postinstall commands.  
       cmds=$old_postinstall_cmds  
       save_ifs="$IFS"; IFS='~'  
       for cmd in $cmds; do  
         IFS="$save_ifs"  
         eval cmd=\"$cmd\"  
         $show "$cmd"  
         $run eval "$cmd" || exit $?  
       done  
       IFS="$save_ifs"  
     done  
   
     if test -n "$future_libdirs"; then  
       $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2  
     fi  
   
     if test -n "$current_libdirs"; then  
       # Maybe just do a dry run.  
       test -n "$run" && current_libdirs=" -n$current_libdirs"  
       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'  
     else  
       exit $EXIT_SUCCESS  
     fi  
     ;;  
   
   # libtool finish mode  
   finish)  
     modename="$modename: finish"  
     libdirs="$nonopt"  
     admincmds=  
   
     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then  
       for dir  
       do  
         libdirs="$libdirs $dir"  
       done  
   
       for libdir in $libdirs; do  
         if test -n "$finish_cmds"; then  
           # Do each command in the finish commands.  
           cmds=$finish_cmds  
           save_ifs="$IFS"; IFS='~'  
           for cmd in $cmds; do  
             IFS="$save_ifs"  
             eval cmd=\"$cmd\"  
             $show "$cmd"  
             $run eval "$cmd" || admincmds="$admincmds  
        $cmd"  
           done  
           IFS="$save_ifs"  
         fi  
         if test -n "$finish_eval"; then  
           # Do the single finish_eval.  
           eval cmds=\"$finish_eval\"  
           $run eval "$cmds" || admincmds="$admincmds  
        $cmds"  
         fi  
       done  
     fi  
   
     # Exit here if they wanted silent mode.  
     test "$show" = : && exit $EXIT_SUCCESS  
   
     $echo "X----------------------------------------------------------------------" | $Xsed  
     $echo "Libraries have been installed in:"  
     for libdir in $libdirs; do  
       $echo "   $libdir"  
     done  
     $echo  
     $echo "If you ever happen to want to link against installed libraries"  
     $echo "in a given directory, LIBDIR, you must either use libtool, and"  
     $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"  
     $echo "flag during linking and do at least one of the following:"  
     if test -n "$shlibpath_var"; then  
       $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"  
       $echo "     during execution"  
     fi  
     if test -n "$runpath_var"; then  
       $echo "   - add LIBDIR to the \`$runpath_var' environment variable"  
       $echo "     during linking"  
     fi  
     if test -n "$hardcode_libdir_flag_spec"; then  
       libdir=LIBDIR  
       eval flag=\"$hardcode_libdir_flag_spec\"  
   
       $echo "   - use the \`$flag' linker flag"  
     fi  
     if test -n "$admincmds"; then  
       $echo "   - have your system administrator run these commands:$admincmds"  
     fi  
     if test -f /etc/ld.so.conf; then  
       $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"  
     fi  
     $echo  
     $echo "See any operating system documentation about shared libraries for"  
     $echo "more information, such as the ld(1) and ld.so(8) manual pages."  
     $echo "X----------------------------------------------------------------------" | $Xsed  
     exit $EXIT_SUCCESS  
     ;;  
   
   # libtool execute mode  
   execute)  
     modename="$modename: execute"  
   
     # The first argument is the command name.  
     cmd="$nonopt"  
     if test -z "$cmd"; then  
       $echo "$modename: you must specify a COMMAND" 1>&2  
       $echo "$help"  
       exit $EXIT_FAILURE  
     fi  
   
     # Handle -dlopen flags immediately.  
     for file in $execute_dlfiles; do  
       if test ! -f "$file"; then  
         $echo "$modename: \`$file' is not a file" 1>&2  
         $echo "$help" 1>&2  
         exit $EXIT_FAILURE  
       fi  
   
       dir=  
       case $file in  
       *.la)  
         # Check to see that this really is a libtool archive.  
         if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :  
         else  
           $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2  
           $echo "$help" 1>&2  
           exit $EXIT_FAILURE  
         fi  
   
         # Read the libtool library.  
         dlname=  
         library_names=  
   
         # If there is no directory component, then add one.  
         case $file in  
         */* | *\\*) . $file ;;  
         *) . ./$file ;;  
         esac  
   
         # Skip this library if it cannot be dlopened.  
         if test -z "$dlname"; then  
           # Warn if it was a shared library.  
           test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"  
           continue  
         fi  
   
         dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`  
         test "X$dir" = "X$file" && dir=.  
   
         if test -f "$dir/$objdir/$dlname"; then  
           dir="$dir/$objdir"  
         else  
           $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2  
           exit $EXIT_FAILURE  
         fi  
         ;;  
   
       *.lo)  
         # Just add the directory containing the .lo file.  
         dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`  
         test "X$dir" = "X$file" && dir=.  
         ;;  
   
       *)  
         $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2  
         continue  
         ;;  
       esac  
   
       # Get the absolute pathname.  
       absdir=`cd "$dir" && pwd`  
       test -n "$absdir" && dir="$absdir"  
   
       # Now add the directory to shlibpath_var.  
       if eval "test -z \"\$$shlibpath_var\""; then  
         eval "$shlibpath_var=\"\$dir\""  
       else  
         eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""  
       fi  
     done  
   
     # This variable tells wrapper scripts just to set shlibpath_var  
     # rather than running their programs.  
     libtool_execute_magic="$magic"  
   
     # Check if any of the arguments is a wrapper script.  
     args=  
     for file  
     do  
       case $file in  
       -*) ;;  
       *)  
         # Do a test to see if this is really a libtool program.  
         if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then  
           # If there is no directory component, then add one.  
           case $file in  
           */* | *\\*) . $file ;;  
           *) . ./$file ;;  
           esac  
   
           # Transform arg to wrapped name.  
           file="$progdir/$program"  
         fi  
         ;;  
       esac  
       # Quote arguments (to preserve shell metacharacters).  
       file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`  
       args="$args \"$file\""  
     done  
   
     if test -z "$run"; then  
       if test -n "$shlibpath_var"; then  
         # Export the shlibpath_var.  
         eval "export $shlibpath_var"  
       fi  
   
       # Restore saved environment variables  
       if test "${save_LC_ALL+set}" = set; then  
         LC_ALL="$save_LC_ALL"; export LC_ALL  
       fi  
       if test "${save_LANG+set}" = set; then  
         LANG="$save_LANG"; export LANG  
       fi  
   
       # Now prepare to actually exec the command.  
       exec_cmd="\$cmd$args"  
     else  
       # Display what would be done.  
       if test -n "$shlibpath_var"; then  
         eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""  
         $echo "export $shlibpath_var"  
       fi  
       $echo "$cmd$args"  
       exit $EXIT_SUCCESS  
     fi  
     ;;  
   
   # libtool clean and uninstall mode  
   clean | uninstall)  
     modename="$modename: $mode"  
     rm="$nonopt"  
     files=  
     rmforce=      rmforce=
     exit_status=0      exit_status=0
   
Line 6448  relink_command=\"$relink_command\"" Line 9441  relink_command=\"$relink_command\""
     for arg      for arg
     do      do
       case $arg in        case $arg in
      -f) rm="$rm $arg"; rmforce=yes ;;      -f) func_append RM " $arg"; rmforce=yes ;;
      -*) rm="$rm $arg" ;;      -*) func_append RM " $arg" ;;
      *) files="$files $arg" ;;      *) func_append files " $arg" ;;
       esac        esac
     done      done
   
    if test -z "$rm"; then    test -z "$RM" && \
      $echo "$modename: you must specify an RM program" 1>&2      func_fatal_help "you must specify an RM program"
      $echo "$help" 1>&2 
      exit $EXIT_FAILURE 
    fi 
   
     rmdirs=      rmdirs=
   
     origobjdir="$objdir"  
     for file in $files; do      for file in $files; do
      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`      func_dirname "$file" "" "."
      if test "X$dir" = "X$file"; then      dir="$func_dirname_result"
        dir=.      if test "X$dir" = X.; then
        objdir="$origobjdir"        odir="$objdir"
       else        else
        objdir="$dir/$origobjdir"        odir="$dir/$objdir"
       fi        fi
      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`      func_basename "$file"
      test "$mode" = uninstall && objdir="$dir"      name="$func_basename_result"
       test "$opt_mode" = uninstall && odir="$dir"
   
      # Remember objdir for removal later, being careful to avoid duplicates      # Remember odir for removal later, being careful to avoid duplicates
      if test "$mode" = clean; then      if test "$opt_mode" = clean; then
         case " $rmdirs " in          case " $rmdirs " in
          *" $objdir "*) ;;          *" $odir "*) ;;
          *) rmdirs="$rmdirs $objdir" ;;          *) func_append rmdirs " $odir" ;;
         esac          esac
       fi        fi
   
       # Don't error if the file doesn't exist and rm -f was used.        # Don't error if the file doesn't exist and rm -f was used.
      if (test -L "$file") >/dev/null 2>&1 \      if { test -L "$file"; } >/dev/null 2>&1 ||
        || (test -h "$file") >/dev/null 2>&1 \         { test -h "$file"; } >/dev/null 2>&1 ||
        || test -f "$file"; then         test -f "$file"; then
         :          :
       elif test -d "$file"; then        elif test -d "$file"; then
         exit_status=1          exit_status=1
Line 6499  relink_command=\"$relink_command\"" Line 9489  relink_command=\"$relink_command\""
       case $name in        case $name in
       *.la)        *.la)
         # Possibly a libtool archive, so verify it.          # Possibly a libtool archive, so verify it.
        if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then        if func_lalib_p "$file"; then
          . $dir/$name          func_source $dir/$name
   
           # Delete the libtool libraries and symlinks.            # Delete the libtool libraries and symlinks.
           for n in $library_names; do            for n in $library_names; do
            rmfiles="$rmfiles $objdir/$n"            func_append rmfiles " $odir/$n"
           done            done
          test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"          test -n "$old_library" && func_append rmfiles " $odir/$old_library"
   
          case "$mode" in          case "$opt_mode" in
           clean)            clean)
            case "  $library_names " in            case " $library_names " in
            # "  " in the beginning catches empty $dlname 
             *" $dlname "*) ;;              *" $dlname "*) ;;
            *) rmfiles="$rmfiles $objdir/$dlname" ;;            *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
             esac              esac
             test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"            test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
             ;;              ;;
           uninstall)            uninstall)
             if test -n "$library_names"; then              if test -n "$library_names"; then
               # Do each command in the postuninstall commands.                # Do each command in the postuninstall commands.
              cmds=$postuninstall_cmds              func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
              save_ifs="$IFS"; IFS='~' 
              for cmd in $cmds; do 
                IFS="$save_ifs" 
                eval cmd=\"$cmd\" 
                $show "$cmd" 
                $run eval "$cmd" 
                if test "$?" -ne 0 && test "$rmforce" != yes; then 
                  exit_status=1 
                fi 
              done 
              IFS="$save_ifs" 
             fi              fi
   
             if test -n "$old_library"; then              if test -n "$old_library"; then
               # Do each command in the old_postuninstall commands.                # Do each command in the old_postuninstall commands.
              cmds=$old_postuninstall_cmds              func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
              save_ifs="$IFS"; IFS='~' 
              for cmd in $cmds; do 
                IFS="$save_ifs" 
                eval cmd=\"$cmd\" 
                $show "$cmd" 
                $run eval "$cmd" 
                if test "$?" -ne 0 && test "$rmforce" != yes; then 
                  exit_status=1 
                fi 
              done 
              IFS="$save_ifs" 
             fi              fi
             # FIXME: should reinstall the best remaining shared library.              # FIXME: should reinstall the best remaining shared library.
             ;;              ;;
Line 6557  relink_command=\"$relink_command\"" Line 9524  relink_command=\"$relink_command\""
   
       *.lo)        *.lo)
         # Possibly a libtool object, so verify it.          # Possibly a libtool object, so verify it.
        if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then        if func_lalib_p "$file"; then
   
           # Read the .lo file            # Read the .lo file
          . $dir/$name          func_source $dir/$name
   
           # Add PIC object to the list of files to remove.            # Add PIC object to the list of files to remove.
          if test -n "$pic_object" \          if test -n "$pic_object" &&
             && test "$pic_object" != none; then             test "$pic_object" != none; then
            rmfiles="$rmfiles $dir/$pic_object"            func_append rmfiles " $dir/$pic_object"
           fi            fi
   
           # Add non-PIC object to the list of files to remove.            # Add non-PIC object to the list of files to remove.
          if test -n "$non_pic_object" \          if test -n "$non_pic_object" &&
             && test "$non_pic_object" != none; then             test "$non_pic_object" != none; then
            rmfiles="$rmfiles $dir/$non_pic_object"            func_append rmfiles " $dir/$non_pic_object"
           fi            fi
         fi          fi
         ;;          ;;
   
       *)        *)
        if test "$mode" = clean ; then        if test "$opt_mode" = clean ; then
           noexename=$name            noexename=$name
           case $file in            case $file in
           *.exe)            *.exe)
            file=`$echo $file|${SED} 's,.exe$,,'`            func_stripname '' '.exe' "$file"
            noexename=`$echo $name|${SED} 's,.exe$,,'`            file=$func_stripname_result
             func_stripname '' '.exe' "$name"
             noexename=$func_stripname_result
             # $file with .exe has already been added to rmfiles,              # $file with .exe has already been added to rmfiles,
             # add $file without .exe              # add $file without .exe
            rmfiles="$rmfiles $file"            func_append rmfiles " $file"
             ;;              ;;
           esac            esac
           # Do a test to see if this is a libtool program.            # Do a test to see if this is a libtool program.
          if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then          if func_ltwrapper_p "$file"; then
            relink_command=            if func_ltwrapper_executable_p "$file"; then
            . $dir/$noexename              func_ltwrapper_scriptname "$file"
               relink_command=
               func_source $func_ltwrapper_scriptname_result
               func_append rmfiles " $func_ltwrapper_scriptname_result"
             else
               relink_command=
               func_source $dir/$noexename
             fi
   
             # note $name still contains .exe if it was in $file originally              # note $name still contains .exe if it was in $file originally
             # as does the version of $file that was added into $rmfiles              # as does the version of $file that was added into $rmfiles
            rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"            func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
             if test "$fast_install" = yes && test -n "$relink_command"; then              if test "$fast_install" = yes && test -n "$relink_command"; then
              rmfiles="$rmfiles $objdir/lt-$name"              func_append rmfiles " $odir/lt-$name"
             fi              fi
             if test "X$noexename" != "X$name" ; then              if test "X$noexename" != "X$name" ; then
              rmfiles="$rmfiles $objdir/lt-${noexename}.c"              func_append rmfiles " $odir/lt-${noexename}.c"
             fi              fi
           fi            fi
         fi          fi
         ;;          ;;
       esac        esac
      $show "$rm $rmfiles"      func_show_eval "$RM $rmfiles" 'exit_status=1'
      $run $rm $rmfiles || exit_status=1 
     done      done
     objdir="$origobjdir"  
   
     # Try to remove the ${objdir}s in the directories where we deleted files      # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do      for dir in $rmdirs; do
       if test -d "$dir"; then        if test -d "$dir"; then
        $show "rmdir $dir"        func_show_eval "rmdir $dir >/dev/null 2>&1"
        $run rmdir $dir >/dev/null 2>&1 
       fi        fi
     done      done
   
     exit $exit_status      exit $exit_status
    ;;}
   
  ""){ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
    $echo "$modename: you must specify a MODE" 1>&2    func_mode_uninstall ${1+"$@"}
    $echo "$generic_help" 1>&2 
    exit $EXIT_FAILURE 
    ;; 
  esac 
   
  if test -z "$exec_cmd"; thentest -z "$opt_mode" && {
    $echo "$modename: invalid operation mode \`$mode'" 1>&2  help="$generic_help"
    $echo "$generic_help" 1>&2  func_fatal_help "you must specify a MODE"
    exit $EXIT_FAILURE}
  fi 
fi # test -z "$show_help" 
   
   test -z "$exec_cmd" && \
     func_fatal_help "invalid operation mode \`$opt_mode'"
   
 if test -n "$exec_cmd"; then  if test -n "$exec_cmd"; then
  eval exec $exec_cmd  eval exec "$exec_cmd"
   exit $EXIT_FAILURE    exit $EXIT_FAILURE
 fi  fi
   
# We need to display help for each of the modes.exit $exit_status
case $mode in 
"") $echo \ 
"Usage: $modename [OPTION]... [MODE-ARG]... 
   
 Provide generalized library-building support services.  
   
     --config          show all configuration variables  
     --debug           enable verbose shell tracing  
 -n, --dry-run         display commands without modifying any files  
     --features        display basic configuration information and exit  
     --finish          same as \`--mode=finish'  
     --help            display this help message and exit  
     --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]  
     --quiet           same as \`--silent'  
     --silent          don't print informational messages  
     --tag=TAG         use configuration variables from tag TAG  
     --version         print version information  
   
 MODE must be one of the following:  
   
       clean           remove files from the build directory  
       compile         compile a source file into a libtool object  
       execute         automatically set library path, then run a program  
       finish          complete the installation of libtool libraries  
       install         install libraries or executables  
       link            create a library or an executable  
       uninstall       remove libraries from an installed directory  
   
 MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for  
 a more detailed description of MODE.  
   
 Report bugs to <bug-libtool@gnu.org>."  
   exit $EXIT_SUCCESS  
   ;;  
   
 clean)  
   $echo \  
 "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...  
   
 Remove files from the build directory.  
   
 RM is the name of the program to use to delete files associated with each FILE  
 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed  
 to RM.  
   
 If FILE is a libtool library, object or program, all the files associated  
 with it are deleted. Otherwise, only FILE itself is deleted using RM."  
   ;;  
   
 compile)  
   $echo \  
 "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE  
   
 Compile a source file into a libtool library object.  
   
 This mode accepts the following additional options:  
   
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE  
   -prefer-pic       try to building PIC objects only  
   -prefer-non-pic   try to building non-PIC objects only  
   -static           always build a \`.o' file suitable for static linking  
   
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file  
 from the given SOURCEFILE.  
   
 The output file name is determined by removing the directory component from  
 SOURCEFILE, then substituting the C source code suffix \`.c' with the  
 library object suffix, \`.lo'."  
   ;;  
   
 execute)  
   $echo \  
 "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...  
   
 Automatically set library path, then run a program.  
   
 This mode accepts the following additional options:  
   
   -dlopen FILE      add the directory containing FILE to the library path  
   
 This mode sets the library path environment variable according to \`-dlopen'  
 flags.  
   
 If any of the ARGS are libtool executable wrappers, then they are translated  
 into their corresponding uninstalled binary, and any of their required library  
 directories are added to the library path.  
   
 Then, COMMAND is executed, with ARGS as arguments."  
   ;;  
   
 finish)  
   $echo \  
 "Usage: $modename [OPTION]... --mode=finish [LIBDIR]...  
   
 Complete the installation of libtool libraries.  
   
 Each LIBDIR is a directory that contains libtool libraries.  
   
 The commands that this mode executes may require superuser privileges.  Use  
 the \`--dry-run' option if you just want to see what would be executed."  
   ;;  
   
 install)  
   $echo \  
 "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...  
   
 Install executables or libraries.  
   
 INSTALL-COMMAND is the installation command.  The first component should be  
 either the \`install' or \`cp' program.  
   
 The rest of the components are interpreted as arguments to that command (only  
 BSD-compatible install options are recognized)."  
   ;;  
   
 link)  
   $echo \  
 "Usage: $modename [OPTION]... --mode=link LINK-COMMAND...  
   
 Link object files or libraries together to form another library, or to  
 create an executable program.  
   
 LINK-COMMAND is a command using the C compiler that you would use to create  
 a program from several object files.  
   
 The following components of LINK-COMMAND are treated specially:  
   
   -all-static       do not do any dynamic linking at all  
   -avoid-version    do not add a version suffix if possible  
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime  
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols  
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)  
   -export-symbols SYMFILE  
                     try to export only the symbols listed in SYMFILE  
   -export-symbols-regex REGEX  
                     try to export only the symbols matching REGEX  
   -LLIBDIR          search LIBDIR for required installed libraries  
   -lNAME            OUTPUT-FILE requires the installed library libNAME  
   -module           build a library that can dlopened  
   -no-fast-install  disable the fast-install mode  
   -no-install       link a not-installable executable  
   -no-undefined     declare that a library does not refer to external symbols  
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects  
   -objectlist FILE  Use a list of object files found in FILE to specify objects  
   -precious-files-regex REGEX  
                     don't remove output files matching REGEX  
   -release RELEASE  specify package release information  
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR  
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries  
   -static           do not do any dynamic linking of libtool libraries  
   -version-info CURRENT[:REVISION[:AGE]]  
                     specify library version info [each variable defaults to 0]  
   
 All other options (arguments beginning with \`-') are ignored.  
   
 Every other argument is treated as a filename.  Files ending in \`.la' are  
 treated as uninstalled libtool libraries, other files are standard or library  
 object files.  
   
 If the OUTPUT-FILE ends in \`.la', then a libtool library is created,  
 only library objects (\`.lo' files) may be specified, and \`-rpath' is  
 required, except when creating a convenience library.  
   
 If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created  
 using \`ar' and \`ranlib', or on Windows using \`lib'.  
   
 If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file  
 is created, otherwise an executable program is created."  
   ;;  
   
 uninstall)  
   $echo \  
 "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...  
   
 Remove libraries from an installation directory.  
   
 RM is the name of the program to use to delete files associated with each FILE  
 (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed  
 to RM.  
   
 If FILE is a libtool library, all the files associated with it are deleted.  
 Otherwise, only FILE itself is deleted using RM."  
   ;;  
   
 *)  
   $echo "$modename: invalid operation mode \`$mode'" 1>&2  
   $echo "$help" 1>&2  
   exit $EXIT_FAILURE  
   ;;  
 esac  
   
 $echo  
 $echo "Try \`$modename --help' for more information about other modes."  
   
 exit $?  
   
 # The TAGs below are defined such that we never get into a situation  # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting  # in which we disable both kinds of libraries.  Given conflicting
 # choices, we go for a static library, that is the most portable,  # choices, we go for a static library, that is the most portable,
Line 6850  exit $? Line 9626  exit $?
 # configuration.  But we'll never go from static-only to shared-only.  # configuration.  But we'll never go from static-only to shared-only.
   
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared  # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
disable_libs=sharedbuild_libtool_libs=no
 build_old_libs=yes
 # ### END LIBTOOL TAG CONFIG: disable-shared  # ### END LIBTOOL TAG CONFIG: disable-shared
   
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static  # ### BEGIN LIBTOOL TAG CONFIG: disable-static
disable_libs=staticbuild_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
 # ### END LIBTOOL TAG CONFIG: disable-static  # ### END LIBTOOL TAG CONFIG: disable-static
   
 # Local Variables:  # Local Variables:
 # mode:shell-script  # mode:shell-script
 # sh-indentation:2  # sh-indentation:2
 # End:  # End:
   # vi:sw=2
   
Removed from v.1.1.1.1  
changed lines
  Added in v.1.1.1.2

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>