Annotation of embedaddon/expat/conftools/ltmain.sh, revision 1.1.1.2

1.1.1.2 ! misho       1: 
        !             2: # libtool (GNU libtool) 2.4
        !             3: # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
        !             4: 
        !             5: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
        !             6: # 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
        !             7: # This is free software; see the source for copying conditions.  There is NO
        !             8: # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
        !             9: 
        !            10: # GNU Libtool is free software; you can redistribute it and/or modify
1.1       misho      11: # it under the terms of the GNU General Public License as published by
                     12: # the Free Software Foundation; either version 2 of the License, or
                     13: # (at your option) any later version.
                     14: #
1.1.1.2 ! misho      15: # As a special exception to the GNU General Public License,
        !            16: # if you distribute this file as part of a program or library that
        !            17: # is built using GNU Libtool, you may include this file under the
        !            18: # same distribution terms that you use for the rest of that program.
        !            19: #
        !            20: # GNU Libtool is distributed in the hope that it will be useful, but
1.1       misho      21: # WITHOUT ANY WARRANTY; without even the implied warranty of
                     22: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
                     23: # General Public License for more details.
                     24: #
                     25: # You should have received a copy of the GNU General Public License
1.1.1.2 ! misho      26: # along with GNU Libtool; see the file COPYING.  If not, a copy
        !            27: # can be downloaded from http://www.gnu.org/licenses/gpl.html,
        !            28: # or obtained by writing to the Free Software Foundation, Inc.,
        !            29: # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
        !            30: 
        !            31: # Usage: $progname [OPTION]... [MODE-ARG]...
        !            32: #
        !            33: # Provide generalized library-building support services.
1.1       misho      34: #
1.1.1.2 ! misho      35: #       --config             show all configuration variables
        !            36: #       --debug              enable verbose shell tracing
        !            37: #   -n, --dry-run            display commands without modifying any files
        !            38: #       --features           display basic configuration information and exit
        !            39: #       --mode=MODE          use operation mode MODE
        !            40: #       --preserve-dup-deps  don't remove duplicate dependency libraries
        !            41: #       --quiet, --silent    don't print informational messages
        !            42: #       --no-quiet, --no-silent
        !            43: #                            print informational messages (default)
        !            44: #       --tag=TAG            use configuration variables from tag TAG
        !            45: #   -v, --verbose            print more informational messages than default
        !            46: #       --no-verbose         don't print the extra informational messages
        !            47: #       --version            print version information
        !            48: #   -h, --help, --help-all   print short, long, or detailed help message
        !            49: #
        !            50: # MODE must be one of the following:
        !            51: #
        !            52: #         clean              remove files from the build directory
        !            53: #         compile            compile a source file into a libtool object
        !            54: #         execute            automatically set library path, then run a program
        !            55: #         finish             complete the installation of libtool libraries
        !            56: #         install            install libraries or executables
        !            57: #         link               create a library or an executable
        !            58: #         uninstall          remove libraries from an installed directory
        !            59: #
        !            60: # MODE-ARGS vary depending on the MODE.  When passed as first option,
        !            61: # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
        !            62: # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
        !            63: #
        !            64: # When reporting a bug, please describe a test case to reproduce it and
        !            65: # include the following information:
        !            66: #
        !            67: #         host-triplet:        $host
        !            68: #         shell:               $SHELL
        !            69: #         compiler:            $LTCC
        !            70: #         compiler flags:              $LTCFLAGS
        !            71: #         linker:              $LD (gnu? $with_gnu_ld)
        !            72: #         $progname:   (GNU libtool) 2.4 Debian-2.4-2ubuntu1
        !            73: #         automake:    $automake_version
        !            74: #         autoconf:    $autoconf_version
        !            75: #
        !            76: # Report bugs to <bug-libtool@gnu.org>.
        !            77: # GNU libtool home page: <http://www.gnu.org/software/libtool/>.
        !            78: # General help using GNU software: <http://www.gnu.org/gethelp/>.
        !            79: 
        !            80: PROGRAM=libtool
        !            81: PACKAGE=libtool
        !            82: VERSION="2.4 Debian-2.4-2ubuntu1"
        !            83: TIMESTAMP=""
        !            84: package_revision=1.3293
        !            85: 
        !            86: # Be Bourne compatible
        !            87: if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
        !            88:   emulate sh
        !            89:   NULLCMD=:
        !            90:   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
        !            91:   # is contrary to our usage.  Disable this feature.
        !            92:   alias -g '${1+"$@"}'='"$@"'
        !            93:   setopt NO_GLOB_SUBST
        !            94: else
        !            95:   case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
        !            96: fi
        !            97: BIN_SH=xpg4; export BIN_SH # for Tru64
        !            98: DUALCASE=1; export DUALCASE # for MKS sh
        !            99: 
        !           100: # A function that is used when there is no print builtin or printf.
        !           101: func_fallback_echo ()
        !           102: {
        !           103:   eval 'cat <<_LTECHO_EOF
        !           104: $1
        !           105: _LTECHO_EOF'
        !           106: }
        !           107: 
        !           108: # NLS nuisances: We save the old values to restore during execute mode.
        !           109: lt_user_locale=
        !           110: lt_safe_locale=
        !           111: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
        !           112: do
        !           113:   eval "if test \"\${$lt_var+set}\" = set; then
        !           114:           save_$lt_var=\$$lt_var
        !           115:           $lt_var=C
        !           116:          export $lt_var
        !           117:          lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
        !           118:          lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
        !           119:        fi"
        !           120: done
        !           121: LC_ALL=C
        !           122: LANGUAGE=C
        !           123: export LANGUAGE LC_ALL
        !           124: 
        !           125: $lt_unset CDPATH
1.1       misho     126: 
                    127: 
                    128: # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
                    129: # is ksh but when the shell is invoked as "sh" and the current value of
                    130: # the _XPG environment variable is not equal to 1 (one), the special
                    131: # positional parameter $0, within a function call, is the name of the
                    132: # function.
                    133: progpath="$0"
                    134: 
1.1.1.2 ! misho     135: 
        !           136: 
        !           137: : ${CP="cp -f"}
        !           138: test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
        !           139: : ${EGREP="/bin/grep -E"}
        !           140: : ${FGREP="/bin/grep -F"}
        !           141: : ${GREP="/bin/grep"}
        !           142: : ${LN_S="ln -s"}
        !           143: : ${MAKE="make"}
        !           144: : ${MKDIR="mkdir"}
        !           145: : ${MV="mv -f"}
        !           146: : ${RM="rm -f"}
        !           147: : ${SED="/bin/sed"}
        !           148: : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
        !           149: : ${Xsed="$SED -e 1s/^X//"}
1.1       misho     150: 
                    151: # Global variables:
                    152: EXIT_SUCCESS=0
                    153: EXIT_FAILURE=1
1.1.1.2 ! misho     154: EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
        !           155: EXIT_SKIP=77     # $? = 77 is used to indicate a skipped test to automake.
1.1       misho     156: 
1.1.1.2 ! misho     157: exit_status=$EXIT_SUCCESS
1.1       misho     158: 
1.1.1.2 ! misho     159: # Make sure IFS has a sensible default
        !           160: lt_nl='
        !           161: '
        !           162: IFS="  $lt_nl"
1.1       misho     163: 
1.1.1.2 ! misho     164: dirname="s,/[^/]*$,,"
        !           165: basename="s,^.*/,,"
1.1       misho     166: 
1.1.1.2 ! misho     167: # func_dirname file append nondir_replacement
        !           168: # Compute the dirname of FILE.  If nonempty, add APPEND to the result,
        !           169: # otherwise set result to NONDIR_REPLACEMENT.
        !           170: func_dirname ()
        !           171: {
        !           172:     func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
        !           173:     if test "X$func_dirname_result" = "X${1}"; then
        !           174:       func_dirname_result="${3}"
        !           175:     else
        !           176:       func_dirname_result="$func_dirname_result${2}"
        !           177:     fi
        !           178: } # func_dirname may be replaced by extended shell implementation
1.1       misho     179: 
1.1.1.2 ! misho     180: 
        !           181: # func_basename file
        !           182: func_basename ()
        !           183: {
        !           184:     func_basename_result=`$ECHO "${1}" | $SED "$basename"`
        !           185: } # func_basename may be replaced by extended shell implementation
        !           186: 
        !           187: 
        !           188: # func_dirname_and_basename file append nondir_replacement
        !           189: # perform func_basename and func_dirname in a single function
        !           190: # call:
        !           191: #   dirname:  Compute the dirname of FILE.  If nonempty,
        !           192: #             add APPEND to the result, otherwise set result
        !           193: #             to NONDIR_REPLACEMENT.
        !           194: #             value returned in "$func_dirname_result"
        !           195: #   basename: Compute filename of FILE.
        !           196: #             value retuned in "$func_basename_result"
        !           197: # Implementation must be kept synchronized with func_dirname
        !           198: # and func_basename. For efficiency, we do not delegate to
        !           199: # those functions but instead duplicate the functionality here.
        !           200: func_dirname_and_basename ()
        !           201: {
        !           202:     # Extract subdirectory from the argument.
        !           203:     func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
        !           204:     if test "X$func_dirname_result" = "X${1}"; then
        !           205:       func_dirname_result="${3}"
        !           206:     else
        !           207:       func_dirname_result="$func_dirname_result${2}"
        !           208:     fi
        !           209:     func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
        !           210: } # func_dirname_and_basename may be replaced by extended shell implementation
        !           211: 
        !           212: 
        !           213: # func_stripname prefix suffix name
        !           214: # strip PREFIX and SUFFIX off of NAME.
        !           215: # PREFIX and SUFFIX must not contain globbing or regex special
        !           216: # characters, hashes, percent signs, but SUFFIX may contain a leading
        !           217: # dot (in which case that matches only a dot).
        !           218: # func_strip_suffix prefix name
        !           219: func_stripname ()
        !           220: {
        !           221:     case ${2} in
        !           222:       .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
        !           223:       *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
        !           224:     esac
        !           225: } # func_stripname may be replaced by extended shell implementation
        !           226: 
        !           227: 
        !           228: # These SED scripts presuppose an absolute path with a trailing slash.
        !           229: pathcar='s,^/\([^/]*\).*$,\1,'
        !           230: pathcdr='s,^/[^/]*,,'
        !           231: removedotparts=':dotsl
        !           232:                s@/\./@/@g
        !           233:                t dotsl
        !           234:                s,/\.$,/,'
        !           235: collapseslashes='s@/\{1,\}@/@g'
        !           236: finalslash='s,/*$,/,'
        !           237: 
        !           238: # func_normal_abspath PATH
        !           239: # Remove doubled-up and trailing slashes, "." path components,
        !           240: # and cancel out any ".." path components in PATH after making
        !           241: # it an absolute path.
        !           242: #             value returned in "$func_normal_abspath_result"
        !           243: func_normal_abspath ()
        !           244: {
        !           245:   # Start from root dir and reassemble the path.
        !           246:   func_normal_abspath_result=
        !           247:   func_normal_abspath_tpath=$1
        !           248:   func_normal_abspath_altnamespace=
        !           249:   case $func_normal_abspath_tpath in
        !           250:     "")
        !           251:       # Empty path, that just means $cwd.
        !           252:       func_stripname '' '/' "`pwd`"
        !           253:       func_normal_abspath_result=$func_stripname_result
        !           254:       return
        !           255:     ;;
        !           256:     # The next three entries are used to spot a run of precisely
        !           257:     # two leading slashes without using negated character classes;
        !           258:     # we take advantage of case's first-match behaviour.
        !           259:     ///*)
        !           260:       # Unusual form of absolute path, do nothing.
        !           261:     ;;
        !           262:     //*)
        !           263:       # Not necessarily an ordinary path; POSIX reserves leading '//'
        !           264:       # and for example Cygwin uses it to access remote file shares
        !           265:       # over CIFS/SMB, so we conserve a leading double slash if found.
        !           266:       func_normal_abspath_altnamespace=/
        !           267:     ;;
        !           268:     /*)
        !           269:       # Absolute path, do nothing.
        !           270:     ;;
        !           271:     *)
        !           272:       # Relative path, prepend $cwd.
        !           273:       func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
        !           274:     ;;
        !           275:   esac
        !           276:   # Cancel out all the simple stuff to save iterations.  We also want
        !           277:   # the path to end with a slash for ease of parsing, so make sure
        !           278:   # there is one (and only one) here.
        !           279:   func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
        !           280:         -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
        !           281:   while :; do
        !           282:     # Processed it all yet?
        !           283:     if test "$func_normal_abspath_tpath" = / ; then
        !           284:       # If we ascended to the root using ".." the result may be empty now.
        !           285:       if test -z "$func_normal_abspath_result" ; then
        !           286:         func_normal_abspath_result=/
        !           287:       fi
        !           288:       break
        !           289:     fi
        !           290:     func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
        !           291:         -e "$pathcar"`
        !           292:     func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
        !           293:         -e "$pathcdr"`
        !           294:     # Figure out what to do with it
        !           295:     case $func_normal_abspath_tcomponent in
        !           296:       "")
        !           297:         # Trailing empty path component, ignore it.
        !           298:       ;;
        !           299:       ..)
        !           300:         # Parent dir; strip last assembled component from result.
        !           301:         func_dirname "$func_normal_abspath_result"
        !           302:         func_normal_abspath_result=$func_dirname_result
        !           303:       ;;
        !           304:       *)
        !           305:         # Actual path component, append it.
        !           306:         func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
        !           307:       ;;
        !           308:     esac
        !           309:   done
        !           310:   # Restore leading double-slash if one was found on entry.
        !           311:   func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
        !           312: }
        !           313: 
        !           314: # func_relative_path SRCDIR DSTDIR
        !           315: # generates a relative path from SRCDIR to DSTDIR, with a trailing
        !           316: # slash if non-empty, suitable for immediately appending a filename
        !           317: # without needing to append a separator.
        !           318: #             value returned in "$func_relative_path_result"
        !           319: func_relative_path ()
        !           320: {
        !           321:   func_relative_path_result=
        !           322:   func_normal_abspath "$1"
        !           323:   func_relative_path_tlibdir=$func_normal_abspath_result
        !           324:   func_normal_abspath "$2"
        !           325:   func_relative_path_tbindir=$func_normal_abspath_result
        !           326: 
        !           327:   # Ascend the tree starting from libdir
        !           328:   while :; do
        !           329:     # check if we have found a prefix of bindir
        !           330:     case $func_relative_path_tbindir in
        !           331:       $func_relative_path_tlibdir)
        !           332:         # found an exact match
        !           333:         func_relative_path_tcancelled=
        !           334:         break
        !           335:         ;;
        !           336:       $func_relative_path_tlibdir*)
        !           337:         # found a matching prefix
        !           338:         func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
        !           339:         func_relative_path_tcancelled=$func_stripname_result
        !           340:         if test -z "$func_relative_path_result"; then
        !           341:           func_relative_path_result=.
        !           342:         fi
        !           343:         break
        !           344:         ;;
        !           345:       *)
        !           346:         func_dirname $func_relative_path_tlibdir
        !           347:         func_relative_path_tlibdir=${func_dirname_result}
        !           348:         if test "x$func_relative_path_tlibdir" = x ; then
        !           349:           # Have to descend all the way to the root!
        !           350:           func_relative_path_result=../$func_relative_path_result
        !           351:           func_relative_path_tcancelled=$func_relative_path_tbindir
        !           352:           break
        !           353:         fi
        !           354:         func_relative_path_result=../$func_relative_path_result
        !           355:         ;;
        !           356:     esac
        !           357:   done
        !           358: 
        !           359:   # Now calculate path; take care to avoid doubling-up slashes.
        !           360:   func_stripname '' '/' "$func_relative_path_result"
        !           361:   func_relative_path_result=$func_stripname_result
        !           362:   func_stripname '/' '/' "$func_relative_path_tcancelled"
        !           363:   if test "x$func_stripname_result" != x ; then
        !           364:     func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
        !           365:   fi
        !           366: 
        !           367:   # Normalisation. If bindir is libdir, return empty string,
        !           368:   # else relative path ending with a slash; either way, target
        !           369:   # file name can be directly appended.
        !           370:   if test ! -z "$func_relative_path_result"; then
        !           371:     func_stripname './' '' "$func_relative_path_result/"
        !           372:     func_relative_path_result=$func_stripname_result
        !           373:   fi
        !           374: }
        !           375: 
        !           376: # The name of this program:
        !           377: func_dirname_and_basename "$progpath"
        !           378: progname=$func_basename_result
        !           379: 
        !           380: # Make sure we have an absolute path for reexecution:
        !           381: case $progpath in
        !           382:   [\\/]*|[A-Za-z]:\\*) ;;
        !           383:   *[\\/]*)
        !           384:      progdir=$func_dirname_result
        !           385:      progdir=`cd "$progdir" && pwd`
        !           386:      progpath="$progdir/$progname"
        !           387:      ;;
        !           388:   *)
        !           389:      save_IFS="$IFS"
        !           390:      IFS=:
        !           391:      for progdir in $PATH; do
        !           392:        IFS="$save_IFS"
        !           393:        test -x "$progdir/$progname" && break
        !           394:      done
        !           395:      IFS="$save_IFS"
        !           396:      test -n "$progdir" || progdir=`pwd`
        !           397:      progpath="$progdir/$progname"
        !           398:      ;;
        !           399: esac
1.1       misho     400: 
                    401: # Sed substitution that helps us do robust quoting.  It backslashifies
                    402: # metacharacters that are still active within double-quoted strings.
                    403: Xsed="${SED}"' -e 1s/^X//'
1.1.1.2 ! misho     404: sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
1.1       misho     405: 
1.1.1.2 ! misho     406: # Same as above, but do not quote variable references.
        !           407: double_quote_subst='s/\(["`\\]\)/\\\1/g'
1.1       misho     408: 
1.1.1.2 ! misho     409: # Sed substitution that turns a string into a regex matching for the
        !           410: # string literally.
        !           411: sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
        !           412: 
        !           413: # Sed substitution that converts a w32 file name or path
        !           414: # which contains forward slashes, into one that contains
        !           415: # (escaped) backslashes.  A very naive implementation.
        !           416: lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
        !           417: 
        !           418: # Re-`\' parameter expansions in output of double_quote_subst that were
        !           419: # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
        !           420: # in input to double_quote_subst, that '$' was protected from expansion.
        !           421: # Since each input `\' is now two `\'s, look for any number of runs of
        !           422: # four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
        !           423: bs='\\'
        !           424: bs2='\\\\'
        !           425: bs4='\\\\\\\\'
        !           426: dollar='\$'
        !           427: sed_double_backslash="\
        !           428:   s/$bs4/&\\
        !           429: /g
        !           430:   s/^$bs2$dollar/$bs&/
        !           431:   s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
        !           432:   s/\n//g"
        !           433: 
        !           434: # Standard options:
        !           435: opt_dry_run=false
        !           436: opt_help=false
        !           437: opt_quiet=false
        !           438: opt_verbose=false
        !           439: opt_warning=:
        !           440: 
        !           441: # func_echo arg...
        !           442: # Echo program name prefixed message, along with the current mode
        !           443: # name if it has been set yet.
        !           444: func_echo ()
        !           445: {
        !           446:     $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
        !           447: }
1.1       misho     448: 
1.1.1.2 ! misho     449: # func_verbose arg...
        !           450: # Echo program name prefixed message in verbose mode only.
        !           451: func_verbose ()
        !           452: {
        !           453:     $opt_verbose && func_echo ${1+"$@"}
1.1       misho     454: 
1.1.1.2 ! misho     455:     # A bug in bash halts the script if the last line of a function
        !           456:     # fails when set -e is in force, so we need another command to
        !           457:     # work around that:
        !           458:     :
        !           459: }
        !           460: 
        !           461: # func_echo_all arg...
        !           462: # Invoke $ECHO with all args, space-separated.
        !           463: func_echo_all ()
        !           464: {
        !           465:     $ECHO "$*"
        !           466: }
        !           467: 
        !           468: # func_error arg...
        !           469: # Echo program name prefixed message to standard error.
        !           470: func_error ()
        !           471: {
        !           472:     $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
        !           473: }
        !           474: 
        !           475: # func_warning arg...
        !           476: # Echo program name prefixed warning message to standard error.
        !           477: func_warning ()
        !           478: {
        !           479:     $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
        !           480: 
        !           481:     # bash bug again:
        !           482:     :
        !           483: }
        !           484: 
        !           485: # func_fatal_error arg...
        !           486: # Echo program name prefixed message to standard error, and exit.
        !           487: func_fatal_error ()
        !           488: {
        !           489:     func_error ${1+"$@"}
        !           490:     exit $EXIT_FAILURE
        !           491: }
        !           492: 
        !           493: # func_fatal_help arg...
        !           494: # Echo program name prefixed message to standard error, followed by
        !           495: # a help hint, and exit.
        !           496: func_fatal_help ()
        !           497: {
        !           498:     func_error ${1+"$@"}
        !           499:     func_fatal_error "$help"
        !           500: }
        !           501: help="Try \`$progname --help' for more information."  ## default
        !           502: 
        !           503: 
        !           504: # func_grep expression filename
        !           505: # Check whether EXPRESSION matches any line of FILENAME, without output.
        !           506: func_grep ()
        !           507: {
        !           508:     $GREP "$1" "$2" >/dev/null 2>&1
        !           509: }
        !           510: 
        !           511: 
        !           512: # func_mkdir_p directory-path
        !           513: # Make sure the entire path to DIRECTORY-PATH is available.
        !           514: func_mkdir_p ()
        !           515: {
        !           516:     my_directory_path="$1"
        !           517:     my_dir_list=
        !           518: 
        !           519:     if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
        !           520: 
        !           521:       # Protect directory names starting with `-'
        !           522:       case $my_directory_path in
        !           523:         -*) my_directory_path="./$my_directory_path" ;;
        !           524:       esac
        !           525: 
        !           526:       # While some portion of DIR does not yet exist...
        !           527:       while test ! -d "$my_directory_path"; do
        !           528:         # ...make a list in topmost first order.  Use a colon delimited
        !           529:        # list incase some portion of path contains whitespace.
        !           530:         my_dir_list="$my_directory_path:$my_dir_list"
        !           531: 
        !           532:         # If the last portion added has no slash in it, the list is done
        !           533:         case $my_directory_path in */*) ;; *) break ;; esac
        !           534: 
        !           535:         # ...otherwise throw away the child directory and loop
        !           536:         my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
        !           537:       done
        !           538:       my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
        !           539: 
        !           540:       save_mkdir_p_IFS="$IFS"; IFS=':'
        !           541:       for my_dir in $my_dir_list; do
        !           542:        IFS="$save_mkdir_p_IFS"
        !           543:         # mkdir can fail with a `File exist' error if two processes
        !           544:         # try to create one of the directories concurrently.  Don't
        !           545:         # stop in that case!
        !           546:         $MKDIR "$my_dir" 2>/dev/null || :
        !           547:       done
        !           548:       IFS="$save_mkdir_p_IFS"
        !           549: 
        !           550:       # Bail out if we (or some other process) failed to create a directory.
        !           551:       test -d "$my_directory_path" || \
        !           552:         func_fatal_error "Failed to create \`$1'"
        !           553:     fi
        !           554: }
1.1       misho     555: 
                    556: 
                    557: # func_mktempdir [string]
                    558: # Make a temporary directory that won't clash with other running
                    559: # libtool processes, and avoids race conditions if possible.  If
                    560: # given, STRING is the basename for that directory.
                    561: func_mktempdir ()
                    562: {
                    563:     my_template="${TMPDIR-/tmp}/${1-$progname}"
                    564: 
1.1.1.2 ! misho     565:     if test "$opt_dry_run" = ":"; then
1.1       misho     566:       # Return a directory name, but don't create it in dry-run mode
                    567:       my_tmpdir="${my_template}-$$"
                    568:     else
                    569: 
                    570:       # If mktemp works, use that first and foremost
                    571:       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
                    572: 
                    573:       if test ! -d "$my_tmpdir"; then
1.1.1.2 ! misho     574:         # Failing that, at least try and use $RANDOM to avoid a race
        !           575:         my_tmpdir="${my_template}-${RANDOM-0}$$"
1.1       misho     576: 
1.1.1.2 ! misho     577:         save_mktempdir_umask=`umask`
        !           578:         umask 0077
        !           579:         $MKDIR "$my_tmpdir"
        !           580:         umask $save_mktempdir_umask
1.1       misho     581:       fi
                    582: 
                    583:       # If we're not in dry-run mode, bomb out on failure
1.1.1.2 ! misho     584:       test -d "$my_tmpdir" || \
        !           585:         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
1.1       misho     586:     fi
                    587: 
1.1.1.2 ! misho     588:     $ECHO "$my_tmpdir"
1.1       misho     589: }
                    590: 
                    591: 
1.1.1.2 ! misho     592: # func_quote_for_eval arg
        !           593: # Aesthetically quote ARG to be evaled later.
        !           594: # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
        !           595: # is double-quoted, suitable for a subsequent eval, whereas
        !           596: # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
        !           597: # which are still active within double quotes backslashified.
        !           598: func_quote_for_eval ()
1.1       misho     599: {
1.1.1.2 ! misho     600:     case $1 in
        !           601:       *[\\\`\"\$]*)
        !           602:        func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
        !           603:       *)
        !           604:         func_quote_for_eval_unquoted_result="$1" ;;
        !           605:     esac
        !           606: 
        !           607:     case $func_quote_for_eval_unquoted_result in
        !           608:       # Double-quote args containing shell metacharacters to delay
        !           609:       # word splitting, command substitution and and variable
        !           610:       # expansion for a subsequent eval.
        !           611:       # Many Bourne shells cannot handle close brackets correctly
        !           612:       # in scan sets, so we specify it separately.
        !           613:       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
        !           614:         func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
        !           615:         ;;
        !           616:       *)
        !           617:         func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
1.1       misho     618:     esac
                    619: }
                    620: 
                    621: 
1.1.1.2 ! misho     622: # func_quote_for_expand arg
        !           623: # Aesthetically quote ARG to be evaled later; same as above,
        !           624: # but do not quote variable references.
        !           625: func_quote_for_expand ()
1.1       misho     626: {
1.1.1.2 ! misho     627:     case $1 in
        !           628:       *[\\\`\"]*)
        !           629:        my_arg=`$ECHO "$1" | $SED \
        !           630:            -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
1.1       misho     631:       *)
1.1.1.2 ! misho     632:         my_arg="$1" ;;
        !           633:     esac
        !           634: 
        !           635:     case $my_arg in
        !           636:       # Double-quote args containing shell metacharacters to delay
        !           637:       # word splitting and command substitution for a subsequent eval.
        !           638:       # Many Bourne shells cannot handle close brackets correctly
        !           639:       # in scan sets, so we specify it separately.
        !           640:       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
        !           641:         my_arg="\"$my_arg\""
        !           642:         ;;
        !           643:     esac
        !           644: 
        !           645:     func_quote_for_expand_result="$my_arg"
1.1       misho     646: }
                    647: 
                    648: 
1.1.1.2 ! misho     649: # func_show_eval cmd [fail_exp]
        !           650: # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
        !           651: # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
        !           652: # is given, then evaluate it.
        !           653: func_show_eval ()
1.1       misho     654: {
1.1.1.2 ! misho     655:     my_cmd="$1"
        !           656:     my_fail_exp="${2-:}"
1.1       misho     657: 
1.1.1.2 ! misho     658:     ${opt_silent-false} || {
        !           659:       func_quote_for_expand "$my_cmd"
        !           660:       eval "func_echo $func_quote_for_expand_result"
        !           661:     }
        !           662: 
        !           663:     if ${opt_dry_run-false}; then :; else
        !           664:       eval "$my_cmd"
        !           665:       my_status=$?
        !           666:       if test "$my_status" -eq 0; then :; else
        !           667:        eval "(exit $my_status); $my_fail_exp"
        !           668:       fi
1.1       misho     669:     fi
                    670: }
                    671: 
1.1.1.2 ! misho     672: 
        !           673: # func_show_eval_locale cmd [fail_exp]
        !           674: # Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
        !           675: # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
        !           676: # is given, then evaluate it.  Use the saved locale for evaluation.
        !           677: func_show_eval_locale ()
1.1       misho     678: {
1.1.1.2 ! misho     679:     my_cmd="$1"
        !           680:     my_fail_exp="${2-:}"
1.1       misho     681: 
1.1.1.2 ! misho     682:     ${opt_silent-false} || {
        !           683:       func_quote_for_expand "$my_cmd"
        !           684:       eval "func_echo $func_quote_for_expand_result"
        !           685:     }
1.1       misho     686: 
1.1.1.2 ! misho     687:     if ${opt_dry_run-false}; then :; else
        !           688:       eval "$lt_user_locale
        !           689:            $my_cmd"
        !           690:       my_status=$?
        !           691:       eval "$lt_safe_locale"
        !           692:       if test "$my_status" -eq 0; then :; else
        !           693:        eval "(exit $my_status); $my_fail_exp"
1.1       misho     694:       fi
1.1.1.2 ! misho     695:     fi
1.1       misho     696: }
                    697: 
1.1.1.2 ! misho     698: # func_tr_sh
        !           699: # Turn $1 into a string suitable for a shell variable name.
        !           700: # Result is stored in $func_tr_sh_result.  All characters
        !           701: # not in the set a-zA-Z0-9_ are replaced with '_'. Further,
        !           702: # if $1 begins with a digit, a '_' is prepended as well.
        !           703: func_tr_sh ()
        !           704: {
        !           705:   case $1 in
        !           706:   [0-9]* | *[!a-zA-Z0-9_]*)
        !           707:     func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
        !           708:     ;;
        !           709:   * )
        !           710:     func_tr_sh_result=$1
        !           711:     ;;
        !           712:   esac
        !           713: }
1.1       misho     714: 
                    715: 
1.1.1.2 ! misho     716: # func_version
        !           717: # Echo version message to standard output and exit.
        !           718: func_version ()
        !           719: {
        !           720:     $opt_debug
1.1       misho     721: 
1.1.1.2 ! misho     722:     $SED -n '/(C)/!b go
        !           723:        :more
        !           724:        /\./!{
        !           725:          N
        !           726:          s/\n# / /
        !           727:          b more
        !           728:        }
        !           729:        :go
        !           730:        /^# '$PROGRAM' (GNU /,/# warranty; / {
        !           731:         s/^# //
        !           732:        s/^# *$//
        !           733:         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
        !           734:         p
        !           735:      }' < "$progpath"
        !           736:      exit $?
        !           737: }
1.1       misho     738: 
1.1.1.2 ! misho     739: # func_usage
        !           740: # Echo short help message to standard output and exit.
        !           741: func_usage ()
        !           742: {
        !           743:     $opt_debug
1.1       misho     744: 
1.1.1.2 ! misho     745:     $SED -n '/^# Usage:/,/^#  *.*--help/ {
        !           746:         s/^# //
        !           747:        s/^# *$//
        !           748:        s/\$progname/'$progname'/
        !           749:        p
        !           750:     }' < "$progpath"
        !           751:     echo
        !           752:     $ECHO "run \`$progname --help | more' for full usage"
        !           753:     exit $?
        !           754: }
1.1       misho     755: 
1.1.1.2 ! misho     756: # func_help [NOEXIT]
        !           757: # Echo long help message to standard output and exit,
        !           758: # unless 'noexit' is passed as argument.
        !           759: func_help ()
        !           760: {
        !           761:     $opt_debug
1.1       misho     762: 
1.1.1.2 ! misho     763:     $SED -n '/^# Usage:/,/# Report bugs to/ {
        !           764:        :print
        !           765:         s/^# //
        !           766:        s/^# *$//
        !           767:        s*\$progname*'$progname'*
        !           768:        s*\$host*'"$host"'*
        !           769:        s*\$SHELL*'"$SHELL"'*
        !           770:        s*\$LTCC*'"$LTCC"'*
        !           771:        s*\$LTCFLAGS*'"$LTCFLAGS"'*
        !           772:        s*\$LD*'"$LD"'*
        !           773:        s/\$with_gnu_ld/'"$with_gnu_ld"'/
        !           774:        s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
        !           775:        s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
        !           776:        p
        !           777:        d
        !           778:      }
        !           779:      /^# .* home page:/b print
        !           780:      /^# General help using/b print
        !           781:      ' < "$progpath"
        !           782:     ret=$?
        !           783:     if test -z "$1"; then
        !           784:       exit $ret
        !           785:     fi
        !           786: }
1.1       misho     787: 
1.1.1.2 ! misho     788: # func_missing_arg argname
        !           789: # Echo program name prefixed message to standard error and set global
        !           790: # exit_cmd.
        !           791: func_missing_arg ()
        !           792: {
        !           793:     $opt_debug
1.1       misho     794: 
1.1.1.2 ! misho     795:     func_error "missing argument for $1."
        !           796:     exit_cmd=exit
        !           797: }
1.1       misho     798: 
                    799: 
1.1.1.2 ! misho     800: # func_split_short_opt shortopt
        !           801: # Set func_split_short_opt_name and func_split_short_opt_arg shell
        !           802: # variables after splitting SHORTOPT after the 2nd character.
        !           803: func_split_short_opt ()
        !           804: {
        !           805:     my_sed_short_opt='1s/^\(..\).*$/\1/;q'
        !           806:     my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
1.1       misho     807: 
1.1.1.2 ! misho     808:     func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
        !           809:     func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
        !           810: } # func_split_short_opt may be replaced by extended shell implementation
1.1       misho     811: 
                    812: 
1.1.1.2 ! misho     813: # func_split_long_opt longopt
        !           814: # Set func_split_long_opt_name and func_split_long_opt_arg shell
        !           815: # variables after splitting LONGOPT at the `=' sign.
        !           816: func_split_long_opt ()
        !           817: {
        !           818:     my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
        !           819:     my_sed_long_arg='1s/^--[^=]*=//'
1.1       misho     820: 
1.1.1.2 ! misho     821:     func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
        !           822:     func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
        !           823: } # func_split_long_opt may be replaced by extended shell implementation
1.1       misho     824: 
1.1.1.2 ! misho     825: exit_cmd=:
1.1       misho     826: 
                    827: 
                    828: 
                    829: 
                    830: 
1.1.1.2 ! misho     831: magic="%%%MAGIC variable%%%"
        !           832: magic_exe="%%%MAGIC EXE variable%%%"
1.1       misho     833: 
1.1.1.2 ! misho     834: # Global variables.
        !           835: nonopt=
        !           836: preserve_args=
        !           837: lo2o="s/\\.lo\$/.${objext}/"
        !           838: o2lo="s/\\.${objext}\$/.lo/"
        !           839: extracted_archives=
        !           840: extracted_serial=0
1.1       misho     841: 
                    842: # If this variable is set in any of the actions, the command in it
                    843: # will be execed at the end.  This prevents here-documents from being
                    844: # left over by shells.
                    845: exec_cmd=
                    846: 
1.1.1.2 ! misho     847: # func_append var value
        !           848: # Append VALUE to the end of shell variable VAR.
        !           849: func_append ()
        !           850: {
        !           851:     eval "${1}=\$${1}\${2}"
        !           852: } # func_append may be replaced by extended shell implementation
1.1       misho     853: 
1.1.1.2 ! misho     854: # func_append_quoted var value
        !           855: # Quote VALUE and append to the end of shell variable VAR, separated
        !           856: # by a space.
        !           857: func_append_quoted ()
        !           858: {
        !           859:     func_quote_for_eval "${2}"
        !           860:     eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
        !           861: } # func_append_quoted may be replaced by extended shell implementation
1.1       misho     862: 
                    863: 
1.1.1.2 ! misho     864: # func_arith arithmetic-term...
        !           865: func_arith ()
        !           866: {
        !           867:     func_arith_result=`expr "${@}"`
        !           868: } # func_arith may be replaced by extended shell implementation
1.1       misho     869: 
                    870: 
1.1.1.2 ! misho     871: # func_len string
        !           872: # STRING may not start with a hyphen.
        !           873: func_len ()
        !           874: {
        !           875:     func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
        !           876: } # func_len may be replaced by extended shell implementation
1.1       misho     877: 
                    878: 
1.1.1.2 ! misho     879: # func_lo2o object
        !           880: func_lo2o ()
        !           881: {
        !           882:     func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
        !           883: } # func_lo2o may be replaced by extended shell implementation
1.1       misho     884: 
                    885: 
1.1.1.2 ! misho     886: # func_xform libobj-or-source
        !           887: func_xform ()
        !           888: {
        !           889:     func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
        !           890: } # func_xform may be replaced by extended shell implementation
1.1       misho     891: 
                    892: 
1.1.1.2 ! misho     893: # func_fatal_configuration arg...
        !           894: # Echo program name prefixed message to standard error, followed by
        !           895: # a configuration failure hint, and exit.
        !           896: func_fatal_configuration ()
        !           897: {
        !           898:     func_error ${1+"$@"}
        !           899:     func_error "See the $PACKAGE documentation for more information."
        !           900:     func_fatal_error "Fatal configuration error."
        !           901: }
1.1       misho     902: 
                    903: 
1.1.1.2 ! misho     904: # func_config
        !           905: # Display the configuration for all the tags in this script.
        !           906: func_config ()
        !           907: {
        !           908:     re_begincf='^# ### BEGIN LIBTOOL'
        !           909:     re_endcf='^# ### END LIBTOOL'
1.1       misho     910: 
1.1.1.2 ! misho     911:     # Default configuration.
        !           912:     $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
1.1       misho     913: 
1.1.1.2 ! misho     914:     # Now print the configurations for the tags.
        !           915:     for tagname in $taglist; do
        !           916:       $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
        !           917:     done
1.1       misho     918: 
1.1.1.2 ! misho     919:     exit $?
        !           920: }
1.1       misho     921: 
1.1.1.2 ! misho     922: # func_features
        !           923: # Display the features supported by this script.
        !           924: func_features ()
        !           925: {
        !           926:     echo "host: $host"
        !           927:     if test "$build_libtool_libs" = yes; then
        !           928:       echo "enable shared libraries"
        !           929:     else
        !           930:       echo "disable shared libraries"
        !           931:     fi
        !           932:     if test "$build_old_libs" = yes; then
        !           933:       echo "enable static libraries"
        !           934:     else
        !           935:       echo "disable static libraries"
        !           936:     fi
1.1       misho     937: 
1.1.1.2 ! misho     938:     exit $?
        !           939: }
1.1       misho     940: 
1.1.1.2 ! misho     941: # func_enable_tag tagname
        !           942: # Verify that TAGNAME is valid, and either flag an error and exit, or
        !           943: # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
        !           944: # variable here.
        !           945: func_enable_tag ()
        !           946: {
        !           947:   # Global variable:
        !           948:   tagname="$1"
1.1       misho     949: 
1.1.1.2 ! misho     950:   re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
        !           951:   re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
        !           952:   sed_extractcf="/$re_begincf/,/$re_endcf/p"
        !           953: 
        !           954:   # Validate tagname.
        !           955:   case $tagname in
        !           956:     *[!-_A-Za-z0-9,/]*)
        !           957:       func_fatal_error "invalid tag name: $tagname"
        !           958:       ;;
        !           959:   esac
1.1       misho     960: 
1.1.1.2 ! misho     961:   # Don't test for the "default" C tag, as we know it's
        !           962:   # there but not specially marked.
        !           963:   case $tagname in
        !           964:     CC) ;;
1.1       misho     965:     *)
1.1.1.2 ! misho     966:       if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
        !           967:        taglist="$taglist $tagname"
1.1       misho     968: 
1.1.1.2 ! misho     969:        # Evaluate the configuration.  Be careful to quote the path
        !           970:        # and the sed script, to avoid splitting on whitespace, but
        !           971:        # also don't use non-portable quotes within backquotes within
        !           972:        # quotes we have to do it in 2 steps:
        !           973:        extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
        !           974:        eval "$extractedcf"
        !           975:       else
        !           976:        func_error "ignoring unknown tag $tagname"
        !           977:       fi
        !           978:       ;;
        !           979:   esac
        !           980: }
1.1       misho     981: 
1.1.1.2 ! misho     982: # func_check_version_match
        !           983: # Ensure that we are using m4 macros, and libtool script from the same
        !           984: # release of libtool.
        !           985: func_check_version_match ()
        !           986: {
        !           987:   if test "$package_revision" != "$macro_revision"; then
        !           988:     if test "$VERSION" != "$macro_version"; then
        !           989:       if test -z "$macro_version"; then
        !           990:         cat >&2 <<_LT_EOF
        !           991: $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
        !           992: $progname: definition of this LT_INIT comes from an older release.
        !           993: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
        !           994: $progname: and run autoconf again.
        !           995: _LT_EOF
        !           996:       else
        !           997:         cat >&2 <<_LT_EOF
        !           998: $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
        !           999: $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
        !          1000: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
        !          1001: $progname: and run autoconf again.
        !          1002: _LT_EOF
        !          1003:       fi
1.1       misho    1004:     else
1.1.1.2 ! misho    1005:       cat >&2 <<_LT_EOF
        !          1006: $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
        !          1007: $progname: but the definition of this LT_INIT comes from revision $macro_revision.
        !          1008: $progname: You should recreate aclocal.m4 with macros from revision $package_revision
        !          1009: $progname: of $PACKAGE $VERSION and run autoconf again.
        !          1010: _LT_EOF
1.1       misho    1011:     fi
                   1012: 
1.1.1.2 ! misho    1013:     exit $EXIT_MISMATCH
        !          1014:   fi
        !          1015: }
1.1       misho    1016: 
                   1017: 
1.1.1.2 ! misho    1018: # Shorthand for --mode=foo, only valid as the first argument
        !          1019: case $1 in
        !          1020: clean|clea|cle|cl)
        !          1021:   shift; set dummy --mode clean ${1+"$@"}; shift
        !          1022:   ;;
        !          1023: compile|compil|compi|comp|com|co|c)
        !          1024:   shift; set dummy --mode compile ${1+"$@"}; shift
        !          1025:   ;;
        !          1026: execute|execut|execu|exec|exe|ex|e)
        !          1027:   shift; set dummy --mode execute ${1+"$@"}; shift
        !          1028:   ;;
        !          1029: finish|finis|fini|fin|fi|f)
        !          1030:   shift; set dummy --mode finish ${1+"$@"}; shift
        !          1031:   ;;
        !          1032: install|instal|insta|inst|ins|in|i)
        !          1033:   shift; set dummy --mode install ${1+"$@"}; shift
        !          1034:   ;;
        !          1035: link|lin|li|l)
        !          1036:   shift; set dummy --mode link ${1+"$@"}; shift
        !          1037:   ;;
        !          1038: uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
        !          1039:   shift; set dummy --mode uninstall ${1+"$@"}; shift
        !          1040:   ;;
        !          1041: esac
1.1       misho    1042: 
                   1043: 
                   1044: 
1.1.1.2 ! misho    1045: # Option defaults:
        !          1046: opt_debug=:
        !          1047: opt_dry_run=false
        !          1048: opt_config=false
        !          1049: opt_preserve_dup_deps=false
        !          1050: opt_features=false
        !          1051: opt_finish=false
        !          1052: opt_help=false
        !          1053: opt_help_all=false
        !          1054: opt_silent=:
        !          1055: opt_verbose=:
        !          1056: opt_silent=false
        !          1057: opt_verbose=false
1.1       misho    1058: 
                   1059: 
1.1.1.2 ! misho    1060: # Parse options once, thoroughly.  This comes as soon as possible in the
        !          1061: # script to make things like `--version' happen as quickly as we can.
        !          1062: {
        !          1063:   # this just eases exit handling
        !          1064:   while test $# -gt 0; do
        !          1065:     opt="$1"
        !          1066:     shift
        !          1067:     case $opt in
        !          1068:       --debug|-x)      opt_debug='set -x'
        !          1069:                        func_echo "enabling shell trace mode"
        !          1070:                        $opt_debug
        !          1071:                        ;;
        !          1072:       --dry-run|--dryrun|-n)
        !          1073:                        opt_dry_run=:
        !          1074:                        ;;
        !          1075:       --config)
        !          1076:                        opt_config=:
        !          1077: func_config
        !          1078:                        ;;
        !          1079:       --dlopen|-dlopen)
        !          1080:                        optarg="$1"
        !          1081:                        opt_dlopen="${opt_dlopen+$opt_dlopen
        !          1082: }$optarg"
        !          1083:                        shift
        !          1084:                        ;;
        !          1085:       --preserve-dup-deps)
        !          1086:                        opt_preserve_dup_deps=:
        !          1087:                        ;;
        !          1088:       --features)
        !          1089:                        opt_features=:
        !          1090: func_features
        !          1091:                        ;;
        !          1092:       --finish)
        !          1093:                        opt_finish=:
        !          1094: set dummy --mode finish ${1+"$@"}; shift
        !          1095:                        ;;
        !          1096:       --help)
        !          1097:                        opt_help=:
        !          1098:                        ;;
        !          1099:       --help-all)
        !          1100:                        opt_help_all=:
        !          1101: opt_help=': help-all'
        !          1102:                        ;;
        !          1103:       --mode)
        !          1104:                        test $# = 0 && func_missing_arg $opt && break
        !          1105:                        optarg="$1"
        !          1106:                        opt_mode="$optarg"
        !          1107: case $optarg in
        !          1108:   # Valid mode arguments:
        !          1109:   clean|compile|execute|finish|install|link|relink|uninstall) ;;
        !          1110: 
        !          1111:   # Catch anything else as an error
        !          1112:   *) func_error "invalid argument for $opt"
        !          1113:      exit_cmd=exit
        !          1114:      break
        !          1115:      ;;
        !          1116: esac
        !          1117:                        shift
        !          1118:                        ;;
        !          1119:       --no-silent|--no-quiet)
        !          1120:                        opt_silent=false
        !          1121: func_append preserve_args " $opt"
        !          1122:                        ;;
        !          1123:       --no-verbose)
        !          1124:                        opt_verbose=false
        !          1125: func_append preserve_args " $opt"
        !          1126:                        ;;
        !          1127:       --silent|--quiet)
        !          1128:                        opt_silent=:
        !          1129: func_append preserve_args " $opt"
        !          1130:         opt_verbose=false
        !          1131:                        ;;
        !          1132:       --verbose|-v)
        !          1133:                        opt_verbose=:
        !          1134: func_append preserve_args " $opt"
        !          1135: opt_silent=false
        !          1136:                        ;;
        !          1137:       --tag)
        !          1138:                        test $# = 0 && func_missing_arg $opt && break
        !          1139:                        optarg="$1"
        !          1140:                        opt_tag="$optarg"
        !          1141: func_append preserve_args " $opt $optarg"
        !          1142: func_enable_tag "$optarg"
        !          1143:                        shift
        !          1144:                        ;;
1.1       misho    1145: 
1.1.1.2 ! misho    1146:       -\?|-h)          func_usage                              ;;
        !          1147:       --help)          func_help                               ;;
        !          1148:       --version)       func_version                            ;;
        !          1149: 
        !          1150:       # Separate optargs to long options:
        !          1151:       --*=*)
        !          1152:                        func_split_long_opt "$opt"
        !          1153:                        set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
        !          1154:                        shift
        !          1155:                        ;;
1.1       misho    1156: 
1.1.1.2 ! misho    1157:       # Separate non-argument short options:
        !          1158:       -\?*|-h*|-n*|-v*)
        !          1159:                        func_split_short_opt "$opt"
        !          1160:                        set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
        !          1161:                        shift
        !          1162:                        ;;
1.1       misho    1163: 
1.1.1.2 ! misho    1164:       --)              break                                   ;;
        !          1165:       -*)              func_fatal_help "unrecognized option \`$opt'" ;;
        !          1166:       *)               set dummy "$opt" ${1+"$@"};     shift; break  ;;
        !          1167:     esac
        !          1168:   done
1.1       misho    1169: 
1.1.1.2 ! misho    1170:   # Validate options:
1.1       misho    1171: 
1.1.1.2 ! misho    1172:   # save first non-option argument
        !          1173:   if test "$#" -gt 0; then
        !          1174:     nonopt="$opt"
        !          1175:     shift
        !          1176:   fi
1.1       misho    1177: 
1.1.1.2 ! misho    1178:   # preserve --debug
        !          1179:   test "$opt_debug" = : || func_append preserve_args " --debug"
1.1       misho    1180: 
1.1.1.2 ! misho    1181:   case $host in
        !          1182:     *cygwin* | *mingw* | *pw32* | *cegcc*)
        !          1183:       # don't eliminate duplications in $postdeps and $predeps
        !          1184:       opt_duplicate_compiler_generated_deps=:
        !          1185:       ;;
        !          1186:     *)
        !          1187:       opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
        !          1188:       ;;
        !          1189:   esac
1.1       misho    1190: 
1.1.1.2 ! misho    1191:   $opt_help || {
        !          1192:     # Sanity checks first:
        !          1193:     func_check_version_match
1.1       misho    1194: 
1.1.1.2 ! misho    1195:     if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
        !          1196:       func_fatal_configuration "not configured to build any kind of library"
        !          1197:     fi
1.1       misho    1198: 
1.1.1.2 ! misho    1199:     # Darwin sucks
        !          1200:     eval std_shrext=\"$shrext_cmds\"
1.1       misho    1201: 
1.1.1.2 ! misho    1202:     # Only execute mode is allowed to have -dlopen flags.
        !          1203:     if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
        !          1204:       func_error "unrecognized option \`-dlopen'"
        !          1205:       $ECHO "$help" 1>&2
        !          1206:       exit $EXIT_FAILURE
        !          1207:     fi
1.1       misho    1208: 
1.1.1.2 ! misho    1209:     # Change the help message to a mode-specific one.
        !          1210:     generic_help="$help"
        !          1211:     help="Try \`$progname --help --mode=$opt_mode' for more information."
        !          1212:   }
1.1       misho    1213: 
                   1214: 
1.1.1.2 ! misho    1215:   # Bail if the options were screwed
        !          1216:   $exit_cmd $EXIT_FAILURE
        !          1217: }
1.1       misho    1218: 
                   1219: 
                   1220: 
                   1221: 
1.1.1.2 ! misho    1222: ## ----------- ##
        !          1223: ##    Main.    ##
        !          1224: ## ----------- ##
        !          1225: 
        !          1226: # func_lalib_p file
        !          1227: # True iff FILE is a libtool `.la' library or `.lo' object file.
        !          1228: # This function is only a basic sanity check; it will hardly flush out
        !          1229: # determined imposters.
        !          1230: func_lalib_p ()
        !          1231: {
        !          1232:     test -f "$1" &&
        !          1233:       $SED -e 4q "$1" 2>/dev/null \
        !          1234:         | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
        !          1235: }
1.1       misho    1236: 
1.1.1.2 ! misho    1237: # func_lalib_unsafe_p file
        !          1238: # True iff FILE is a libtool `.la' library or `.lo' object file.
        !          1239: # This function implements the same check as func_lalib_p without
        !          1240: # resorting to external programs.  To this end, it redirects stdin and
        !          1241: # closes it afterwards, without saving the original file descriptor.
        !          1242: # As a safety measure, use it only where a negative result would be
        !          1243: # fatal anyway.  Works if `file' does not exist.
        !          1244: func_lalib_unsafe_p ()
        !          1245: {
        !          1246:     lalib_p=no
        !          1247:     if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
        !          1248:        for lalib_p_l in 1 2 3 4
        !          1249:        do
        !          1250:            read lalib_p_line
        !          1251:            case "$lalib_p_line" in
        !          1252:                \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
        !          1253:            esac
        !          1254:        done
        !          1255:        exec 0<&5 5<&-
1.1       misho    1256:     fi
1.1.1.2 ! misho    1257:     test "$lalib_p" = yes
        !          1258: }
1.1       misho    1259: 
1.1.1.2 ! misho    1260: # func_ltwrapper_script_p file
        !          1261: # True iff FILE is a libtool wrapper script
        !          1262: # This function is only a basic sanity check; it will hardly flush out
        !          1263: # determined imposters.
        !          1264: func_ltwrapper_script_p ()
        !          1265: {
        !          1266:     func_lalib_p "$1"
        !          1267: }
1.1       misho    1268: 
1.1.1.2 ! misho    1269: # func_ltwrapper_executable_p file
        !          1270: # True iff FILE is a libtool wrapper executable
        !          1271: # This function is only a basic sanity check; it will hardly flush out
        !          1272: # determined imposters.
        !          1273: func_ltwrapper_executable_p ()
        !          1274: {
        !          1275:     func_ltwrapper_exec_suffix=
        !          1276:     case $1 in
        !          1277:     *.exe) ;;
        !          1278:     *) func_ltwrapper_exec_suffix=.exe ;;
        !          1279:     esac
        !          1280:     $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
        !          1281: }
1.1       misho    1282: 
1.1.1.2 ! misho    1283: # func_ltwrapper_scriptname file
        !          1284: # Assumes file is an ltwrapper_executable
        !          1285: # uses $file to determine the appropriate filename for a
        !          1286: # temporary ltwrapper_script.
        !          1287: func_ltwrapper_scriptname ()
        !          1288: {
        !          1289:     func_dirname_and_basename "$1" "" "."
        !          1290:     func_stripname '' '.exe' "$func_basename_result"
        !          1291:     func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
        !          1292: }
1.1       misho    1293: 
1.1.1.2 ! misho    1294: # func_ltwrapper_p file
        !          1295: # True iff FILE is a libtool wrapper script or wrapper executable
        !          1296: # This function is only a basic sanity check; it will hardly flush out
        !          1297: # determined imposters.
        !          1298: func_ltwrapper_p ()
        !          1299: {
        !          1300:     func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
        !          1301: }
1.1       misho    1302: 
                   1303: 
1.1.1.2 ! misho    1304: # func_execute_cmds commands fail_cmd
        !          1305: # Execute tilde-delimited COMMANDS.
        !          1306: # If FAIL_CMD is given, eval that upon failure.
        !          1307: # FAIL_CMD may read-access the current command in variable CMD!
        !          1308: func_execute_cmds ()
        !          1309: {
        !          1310:     $opt_debug
        !          1311:     save_ifs=$IFS; IFS='~'
        !          1312:     for cmd in $1; do
        !          1313:       IFS=$save_ifs
        !          1314:       eval cmd=\"$cmd\"
        !          1315:       func_show_eval "$cmd" "${2-:}"
        !          1316:     done
        !          1317:     IFS=$save_ifs
        !          1318: }
1.1       misho    1319: 
                   1320: 
1.1.1.2 ! misho    1321: # func_source file
        !          1322: # Source FILE, adding directory component if necessary.
        !          1323: # Note that it is not necessary on cygwin/mingw to append a dot to
        !          1324: # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
        !          1325: # behavior happens only for exec(3), not for open(2)!  Also, sourcing
        !          1326: # `FILE.' does not work on cygwin managed mounts.
        !          1327: func_source ()
        !          1328: {
        !          1329:     $opt_debug
        !          1330:     case $1 in
        !          1331:     */* | *\\*)        . "$1" ;;
        !          1332:     *)         . "./$1" ;;
        !          1333:     esac
        !          1334: }
1.1       misho    1335: 
                   1336: 
1.1.1.2 ! misho    1337: # func_resolve_sysroot PATH
        !          1338: # Replace a leading = in PATH with a sysroot.  Store the result into
        !          1339: # func_resolve_sysroot_result
        !          1340: func_resolve_sysroot ()
        !          1341: {
        !          1342:   func_resolve_sysroot_result=$1
        !          1343:   case $func_resolve_sysroot_result in
        !          1344:   =*)
        !          1345:     func_stripname '=' '' "$func_resolve_sysroot_result"
        !          1346:     func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
1.1       misho    1347:     ;;
1.1.1.2 ! misho    1348:   esac
        !          1349: }
1.1       misho    1350: 
1.1.1.2 ! misho    1351: # func_replace_sysroot PATH
        !          1352: # If PATH begins with the sysroot, replace it with = and
        !          1353: # store the result into func_replace_sysroot_result.
        !          1354: func_replace_sysroot ()
        !          1355: {
        !          1356:   case "$lt_sysroot:$1" in
        !          1357:   ?*:"$lt_sysroot"*)
        !          1358:     func_stripname "$lt_sysroot" '' "$1"
        !          1359:     func_replace_sysroot_result="=$func_stripname_result"
        !          1360:     ;;
        !          1361:   *)
        !          1362:     # Including no sysroot.
        !          1363:     func_replace_sysroot_result=$1
        !          1364:     ;;
        !          1365:   esac
        !          1366: }
1.1       misho    1367: 
1.1.1.2 ! misho    1368: # func_infer_tag arg
        !          1369: # Infer tagged configuration to use if any are available and
        !          1370: # if one wasn't chosen via the "--tag" command line option.
        !          1371: # Only attempt this if the compiler in the base compile
        !          1372: # command doesn't match the default compiler.
        !          1373: # arg is usually of the form 'gcc ...'
        !          1374: func_infer_tag ()
        !          1375: {
        !          1376:     $opt_debug
        !          1377:     if test -n "$available_tags" && test -z "$tagname"; then
        !          1378:       CC_quoted=
        !          1379:       for arg in $CC; do
        !          1380:        func_append_quoted CC_quoted "$arg"
        !          1381:       done
        !          1382:       CC_expanded=`func_echo_all $CC`
        !          1383:       CC_quoted_expanded=`func_echo_all $CC_quoted`
        !          1384:       case $@ in
        !          1385:       # Blanks in the command may have been stripped by the calling shell,
        !          1386:       # but not from the CC environment variable when configure was run.
        !          1387:       " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
        !          1388:       " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
        !          1389:       # Blanks at the start of $base_compile will cause this to fail
        !          1390:       # if we don't check for them as well.
        !          1391:       *)
        !          1392:        for z in $available_tags; do
        !          1393:          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
        !          1394:            # Evaluate the configuration.
        !          1395:            eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
        !          1396:            CC_quoted=
        !          1397:            for arg in $CC; do
        !          1398:              # Double-quote args containing other shell metacharacters.
        !          1399:              func_append_quoted CC_quoted "$arg"
        !          1400:            done
        !          1401:            CC_expanded=`func_echo_all $CC`
        !          1402:            CC_quoted_expanded=`func_echo_all $CC_quoted`
        !          1403:            case "$@ " in
        !          1404:            " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
        !          1405:            " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
        !          1406:              # The compiler in the base compile command matches
        !          1407:              # the one in the tagged configuration.
        !          1408:              # Assume this is the tagged configuration we want.
        !          1409:              tagname=$z
        !          1410:              break
        !          1411:              ;;
        !          1412:            esac
1.1       misho    1413:          fi
1.1.1.2 ! misho    1414:        done
        !          1415:        # If $tagname still isn't set, then no tagged configuration
        !          1416:        # was found and let the user know that the "--tag" command
        !          1417:        # line option must be used.
        !          1418:        if test -z "$tagname"; then
        !          1419:          func_echo "unable to infer tagged configuration"
        !          1420:          func_fatal_error "specify a tag with \`--tag'"
        !          1421: #      else
        !          1422: #        func_verbose "using $tagname tagged configuration"
1.1       misho    1423:        fi
                   1424:        ;;
                   1425:       esac
1.1.1.2 ! misho    1426:     fi
        !          1427: }
1.1       misho    1428: 
                   1429: 
                   1430: 
1.1.1.2 ! misho    1431: # func_write_libtool_object output_name pic_name nonpic_name
        !          1432: # Create a libtool object file (analogous to a ".la" file),
        !          1433: # but don't create it if we're doing a dry run.
        !          1434: func_write_libtool_object ()
        !          1435: {
        !          1436:     write_libobj=${1}
        !          1437:     if test "$build_libtool_libs" = yes; then
        !          1438:       write_lobj=\'${2}\'
        !          1439:     else
        !          1440:       write_lobj=none
        !          1441:     fi
1.1       misho    1442: 
1.1.1.2 ! misho    1443:     if test "$build_old_libs" = yes; then
        !          1444:       write_oldobj=\'${3}\'
        !          1445:     else
        !          1446:       write_oldobj=none
        !          1447:     fi
1.1       misho    1448: 
1.1.1.2 ! misho    1449:     $opt_dry_run || {
        !          1450:       cat >${write_libobj}T <<EOF
        !          1451: # $write_libobj - a libtool object file
        !          1452: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
        !          1453: #
        !          1454: # Please DO NOT delete this file!
        !          1455: # It is necessary for linking the library.
1.1       misho    1456: 
1.1.1.2 ! misho    1457: # Name of the PIC object.
        !          1458: pic_object=$write_lobj
1.1       misho    1459: 
1.1.1.2 ! misho    1460: # Name of the non-PIC object
        !          1461: non_pic_object=$write_oldobj
1.1       misho    1462: 
1.1.1.2 ! misho    1463: EOF
        !          1464:       $MV "${write_libobj}T" "${write_libobj}"
        !          1465:     }
        !          1466: }
1.1       misho    1467: 
                   1468: 
1.1.1.2 ! misho    1469: ##################################################
        !          1470: # FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
        !          1471: ##################################################
        !          1472: 
        !          1473: # func_convert_core_file_wine_to_w32 ARG
        !          1474: # Helper function used by file name conversion functions when $build is *nix,
        !          1475: # and $host is mingw, cygwin, or some other w32 environment. Relies on a
        !          1476: # correctly configured wine environment available, with the winepath program
        !          1477: # in $build's $PATH.
        !          1478: #
        !          1479: # ARG is the $build file name to be converted to w32 format.
        !          1480: # Result is available in $func_convert_core_file_wine_to_w32_result, and will
        !          1481: # be empty on error (or when ARG is empty)
        !          1482: func_convert_core_file_wine_to_w32 ()
        !          1483: {
        !          1484:   $opt_debug
        !          1485:   func_convert_core_file_wine_to_w32_result="$1"
        !          1486:   if test -n "$1"; then
        !          1487:     # Unfortunately, winepath does not exit with a non-zero error code, so we
        !          1488:     # are forced to check the contents of stdout. On the other hand, if the
        !          1489:     # command is not found, the shell will set an exit code of 127 and print
        !          1490:     # *an error message* to stdout. So we must check for both error code of
        !          1491:     # zero AND non-empty stdout, which explains the odd construction:
        !          1492:     func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
        !          1493:     if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
        !          1494:       func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
        !          1495:         $SED -e "$lt_sed_naive_backslashify"`
        !          1496:     else
        !          1497:       func_convert_core_file_wine_to_w32_result=
        !          1498:     fi
        !          1499:   fi
        !          1500: }
        !          1501: # end: func_convert_core_file_wine_to_w32
1.1       misho    1502: 
                   1503: 
1.1.1.2 ! misho    1504: # func_convert_core_path_wine_to_w32 ARG
        !          1505: # Helper function used by path conversion functions when $build is *nix, and
        !          1506: # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
        !          1507: # configured wine environment available, with the winepath program in $build's
        !          1508: # $PATH. Assumes ARG has no leading or trailing path separator characters.
        !          1509: #
        !          1510: # ARG is path to be converted from $build format to win32.
        !          1511: # Result is available in $func_convert_core_path_wine_to_w32_result.
        !          1512: # Unconvertible file (directory) names in ARG are skipped; if no directory names
        !          1513: # are convertible, then the result may be empty.
        !          1514: func_convert_core_path_wine_to_w32 ()
        !          1515: {
        !          1516:   $opt_debug
        !          1517:   # unfortunately, winepath doesn't convert paths, only file names
        !          1518:   func_convert_core_path_wine_to_w32_result=""
        !          1519:   if test -n "$1"; then
        !          1520:     oldIFS=$IFS
        !          1521:     IFS=:
        !          1522:     for func_convert_core_path_wine_to_w32_f in $1; do
        !          1523:       IFS=$oldIFS
        !          1524:       func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
        !          1525:       if test -n "$func_convert_core_file_wine_to_w32_result" ; then
        !          1526:         if test -z "$func_convert_core_path_wine_to_w32_result"; then
        !          1527:           func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
        !          1528:         else
        !          1529:           func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
        !          1530:         fi
        !          1531:       fi
        !          1532:     done
        !          1533:     IFS=$oldIFS
        !          1534:   fi
        !          1535: }
        !          1536: # end: func_convert_core_path_wine_to_w32
1.1       misho    1537: 
                   1538: 
1.1.1.2 ! misho    1539: # func_cygpath ARGS...
        !          1540: # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
        !          1541: # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
        !          1542: # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
        !          1543: # (2), returns the Cygwin file name or path in func_cygpath_result (input
        !          1544: # file name or path is assumed to be in w32 format, as previously converted
        !          1545: # from $build's *nix or MSYS format). In case (3), returns the w32 file name
        !          1546: # or path in func_cygpath_result (input file name or path is assumed to be in
        !          1547: # Cygwin format). Returns an empty string on error.
        !          1548: #
        !          1549: # ARGS are passed to cygpath, with the last one being the file name or path to
        !          1550: # be converted.
        !          1551: #
        !          1552: # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
        !          1553: # environment variable; do not put it in $PATH.
        !          1554: func_cygpath ()
        !          1555: {
        !          1556:   $opt_debug
        !          1557:   if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
        !          1558:     func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
        !          1559:     if test "$?" -ne 0; then
        !          1560:       # on failure, ensure result is empty
        !          1561:       func_cygpath_result=
        !          1562:     fi
        !          1563:   else
        !          1564:     func_cygpath_result=
        !          1565:     func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
        !          1566:   fi
        !          1567: }
        !          1568: #end: func_cygpath
1.1       misho    1569: 
                   1570: 
1.1.1.2 ! misho    1571: # func_convert_core_msys_to_w32 ARG
        !          1572: # Convert file name or path ARG from MSYS format to w32 format.  Return
        !          1573: # result in func_convert_core_msys_to_w32_result.
        !          1574: func_convert_core_msys_to_w32 ()
        !          1575: {
        !          1576:   $opt_debug
        !          1577:   # awkward: cmd appends spaces to result
        !          1578:   func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
        !          1579:     $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
        !          1580: }
        !          1581: #end: func_convert_core_msys_to_w32
1.1       misho    1582: 
                   1583: 
1.1.1.2 ! misho    1584: # func_convert_file_check ARG1 ARG2
        !          1585: # Verify that ARG1 (a file name in $build format) was converted to $host
        !          1586: # format in ARG2. Otherwise, emit an error message, but continue (resetting
        !          1587: # func_to_host_file_result to ARG1).
        !          1588: func_convert_file_check ()
        !          1589: {
        !          1590:   $opt_debug
        !          1591:   if test -z "$2" && test -n "$1" ; then
        !          1592:     func_error "Could not determine host file name corresponding to"
        !          1593:     func_error "  \`$1'"
        !          1594:     func_error "Continuing, but uninstalled executables may not work."
        !          1595:     # Fallback:
        !          1596:     func_to_host_file_result="$1"
        !          1597:   fi
        !          1598: }
        !          1599: # end func_convert_file_check
1.1       misho    1600: 
                   1601: 
1.1.1.2 ! misho    1602: # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
        !          1603: # Verify that FROM_PATH (a path in $build format) was converted to $host
        !          1604: # format in TO_PATH. Otherwise, emit an error message, but continue, resetting
        !          1605: # func_to_host_file_result to a simplistic fallback value (see below).
        !          1606: func_convert_path_check ()
        !          1607: {
        !          1608:   $opt_debug
        !          1609:   if test -z "$4" && test -n "$3"; then
        !          1610:     func_error "Could not determine the host path corresponding to"
        !          1611:     func_error "  \`$3'"
        !          1612:     func_error "Continuing, but uninstalled executables may not work."
        !          1613:     # Fallback.  This is a deliberately simplistic "conversion" and
        !          1614:     # should not be "improved".  See libtool.info.
        !          1615:     if test "x$1" != "x$2"; then
        !          1616:       lt_replace_pathsep_chars="s|$1|$2|g"
        !          1617:       func_to_host_path_result=`echo "$3" |
        !          1618:         $SED -e "$lt_replace_pathsep_chars"`
        !          1619:     else
        !          1620:       func_to_host_path_result="$3"
        !          1621:     fi
        !          1622:   fi
        !          1623: }
        !          1624: # end func_convert_path_check
1.1       misho    1625: 
                   1626: 
1.1.1.2 ! misho    1627: # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
        !          1628: # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
        !          1629: # and appending REPL if ORIG matches BACKPAT.
        !          1630: func_convert_path_front_back_pathsep ()
        !          1631: {
        !          1632:   $opt_debug
        !          1633:   case $4 in
        !          1634:   $1 ) func_to_host_path_result="$3$func_to_host_path_result"
        !          1635:     ;;
        !          1636:   esac
        !          1637:   case $4 in
        !          1638:   $2 ) func_append func_to_host_path_result "$3"
        !          1639:     ;;
        !          1640:   esac
        !          1641: }
        !          1642: # end func_convert_path_front_back_pathsep
1.1       misho    1643: 
                   1644: 
1.1.1.2 ! misho    1645: ##################################################
        !          1646: # $build to $host FILE NAME CONVERSION FUNCTIONS #
        !          1647: ##################################################
        !          1648: # invoked via `$to_host_file_cmd ARG'
        !          1649: #
        !          1650: # In each case, ARG is the path to be converted from $build to $host format.
        !          1651: # Result will be available in $func_to_host_file_result.
1.1       misho    1652: 
                   1653: 
1.1.1.2 ! misho    1654: # func_to_host_file ARG
        !          1655: # Converts the file name ARG from $build format to $host format. Return result
        !          1656: # in func_to_host_file_result.
        !          1657: func_to_host_file ()
        !          1658: {
        !          1659:   $opt_debug
        !          1660:   $to_host_file_cmd "$1"
        !          1661: }
        !          1662: # end func_to_host_file
1.1       misho    1663: 
                   1664: 
1.1.1.2 ! misho    1665: # func_to_tool_file ARG LAZY
        !          1666: # converts the file name ARG from $build format to toolchain format. Return
        !          1667: # result in func_to_tool_file_result.  If the conversion in use is listed
        !          1668: # in (the comma separated) LAZY, no conversion takes place.
        !          1669: func_to_tool_file ()
        !          1670: {
        !          1671:   $opt_debug
        !          1672:   case ,$2, in
        !          1673:     *,"$to_tool_file_cmd",*)
        !          1674:       func_to_tool_file_result=$1
        !          1675:       ;;
        !          1676:     *)
        !          1677:       $to_tool_file_cmd "$1"
        !          1678:       func_to_tool_file_result=$func_to_host_file_result
        !          1679:       ;;
        !          1680:   esac
        !          1681: }
        !          1682: # end func_to_tool_file
1.1       misho    1683: 
                   1684: 
1.1.1.2 ! misho    1685: # func_convert_file_noop ARG
        !          1686: # Copy ARG to func_to_host_file_result.
        !          1687: func_convert_file_noop ()
        !          1688: {
        !          1689:   func_to_host_file_result="$1"
        !          1690: }
        !          1691: # end func_convert_file_noop
1.1       misho    1692: 
                   1693: 
1.1.1.2 ! misho    1694: # func_convert_file_msys_to_w32 ARG
        !          1695: # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
        !          1696: # conversion to w32 is not available inside the cwrapper.  Returns result in
        !          1697: # func_to_host_file_result.
        !          1698: func_convert_file_msys_to_w32 ()
        !          1699: {
        !          1700:   $opt_debug
        !          1701:   func_to_host_file_result="$1"
        !          1702:   if test -n "$1"; then
        !          1703:     func_convert_core_msys_to_w32 "$1"
        !          1704:     func_to_host_file_result="$func_convert_core_msys_to_w32_result"
        !          1705:   fi
        !          1706:   func_convert_file_check "$1" "$func_to_host_file_result"
        !          1707: }
        !          1708: # end func_convert_file_msys_to_w32
1.1       misho    1709: 
                   1710: 
1.1.1.2 ! misho    1711: # func_convert_file_cygwin_to_w32 ARG
        !          1712: # Convert file name ARG from Cygwin to w32 format.  Returns result in
        !          1713: # func_to_host_file_result.
        !          1714: func_convert_file_cygwin_to_w32 ()
        !          1715: {
        !          1716:   $opt_debug
        !          1717:   func_to_host_file_result="$1"
        !          1718:   if test -n "$1"; then
        !          1719:     # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
        !          1720:     # LT_CYGPATH in this case.
        !          1721:     func_to_host_file_result=`cygpath -m "$1"`
        !          1722:   fi
        !          1723:   func_convert_file_check "$1" "$func_to_host_file_result"
        !          1724: }
        !          1725: # end func_convert_file_cygwin_to_w32
1.1       misho    1726: 
                   1727: 
1.1.1.2 ! misho    1728: # func_convert_file_nix_to_w32 ARG
        !          1729: # Convert file name ARG from *nix to w32 format.  Requires a wine environment
        !          1730: # and a working winepath. Returns result in func_to_host_file_result.
        !          1731: func_convert_file_nix_to_w32 ()
        !          1732: {
        !          1733:   $opt_debug
        !          1734:   func_to_host_file_result="$1"
        !          1735:   if test -n "$1"; then
        !          1736:     func_convert_core_file_wine_to_w32 "$1"
        !          1737:     func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
        !          1738:   fi
        !          1739:   func_convert_file_check "$1" "$func_to_host_file_result"
        !          1740: }
        !          1741: # end func_convert_file_nix_to_w32
1.1       misho    1742: 
                   1743: 
1.1.1.2 ! misho    1744: # func_convert_file_msys_to_cygwin ARG
        !          1745: # Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
        !          1746: # Returns result in func_to_host_file_result.
        !          1747: func_convert_file_msys_to_cygwin ()
        !          1748: {
        !          1749:   $opt_debug
        !          1750:   func_to_host_file_result="$1"
        !          1751:   if test -n "$1"; then
        !          1752:     func_convert_core_msys_to_w32 "$1"
        !          1753:     func_cygpath -u "$func_convert_core_msys_to_w32_result"
        !          1754:     func_to_host_file_result="$func_cygpath_result"
        !          1755:   fi
        !          1756:   func_convert_file_check "$1" "$func_to_host_file_result"
        !          1757: }
        !          1758: # end func_convert_file_msys_to_cygwin
1.1       misho    1759: 
                   1760: 
1.1.1.2 ! misho    1761: # func_convert_file_nix_to_cygwin ARG
        !          1762: # Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
        !          1763: # in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
        !          1764: # in func_to_host_file_result.
        !          1765: func_convert_file_nix_to_cygwin ()
        !          1766: {
        !          1767:   $opt_debug
        !          1768:   func_to_host_file_result="$1"
        !          1769:   if test -n "$1"; then
        !          1770:     # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
        !          1771:     func_convert_core_file_wine_to_w32 "$1"
        !          1772:     func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
        !          1773:     func_to_host_file_result="$func_cygpath_result"
        !          1774:   fi
        !          1775:   func_convert_file_check "$1" "$func_to_host_file_result"
        !          1776: }
        !          1777: # end func_convert_file_nix_to_cygwin
1.1       misho    1778: 
                   1779: 
1.1.1.2 ! misho    1780: #############################################
        !          1781: # $build to $host PATH CONVERSION FUNCTIONS #
        !          1782: #############################################
        !          1783: # invoked via `$to_host_path_cmd ARG'
        !          1784: #
        !          1785: # In each case, ARG is the path to be converted from $build to $host format.
        !          1786: # The result will be available in $func_to_host_path_result.
        !          1787: #
        !          1788: # Path separators are also converted from $build format to $host format.  If
        !          1789: # ARG begins or ends with a path separator character, it is preserved (but
        !          1790: # converted to $host format) on output.
        !          1791: #
        !          1792: # All path conversion functions are named using the following convention:
        !          1793: #   file name conversion function    : func_convert_file_X_to_Y ()
        !          1794: #   path conversion function         : func_convert_path_X_to_Y ()
        !          1795: # where, for any given $build/$host combination the 'X_to_Y' value is the
        !          1796: # same.  If conversion functions are added for new $build/$host combinations,
        !          1797: # the two new functions must follow this pattern, or func_init_to_host_path_cmd
        !          1798: # will break.
1.1       misho    1799: 
                   1800: 
1.1.1.2 ! misho    1801: # func_init_to_host_path_cmd
        !          1802: # Ensures that function "pointer" variable $to_host_path_cmd is set to the
        !          1803: # appropriate value, based on the value of $to_host_file_cmd.
        !          1804: to_host_path_cmd=
        !          1805: func_init_to_host_path_cmd ()
        !          1806: {
        !          1807:   $opt_debug
        !          1808:   if test -z "$to_host_path_cmd"; then
        !          1809:     func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
        !          1810:     to_host_path_cmd="func_convert_path_${func_stripname_result}"
        !          1811:   fi
        !          1812: }
1.1       misho    1813: 
                   1814: 
1.1.1.2 ! misho    1815: # func_to_host_path ARG
        !          1816: # Converts the path ARG from $build format to $host format. Return result
        !          1817: # in func_to_host_path_result.
        !          1818: func_to_host_path ()
        !          1819: {
        !          1820:   $opt_debug
        !          1821:   func_init_to_host_path_cmd
        !          1822:   $to_host_path_cmd "$1"
        !          1823: }
        !          1824: # end func_to_host_path
1.1       misho    1825: 
                   1826: 
1.1.1.2 ! misho    1827: # func_convert_path_noop ARG
        !          1828: # Copy ARG to func_to_host_path_result.
        !          1829: func_convert_path_noop ()
        !          1830: {
        !          1831:   func_to_host_path_result="$1"
        !          1832: }
        !          1833: # end func_convert_path_noop
1.1       misho    1834: 
                   1835: 
1.1.1.2 ! misho    1836: # func_convert_path_msys_to_w32 ARG
        !          1837: # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
        !          1838: # conversion to w32 is not available inside the cwrapper.  Returns result in
        !          1839: # func_to_host_path_result.
        !          1840: func_convert_path_msys_to_w32 ()
        !          1841: {
        !          1842:   $opt_debug
        !          1843:   func_to_host_path_result="$1"
        !          1844:   if test -n "$1"; then
        !          1845:     # Remove leading and trailing path separator characters from ARG.  MSYS
        !          1846:     # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
        !          1847:     # and winepath ignores them completely.
        !          1848:     func_stripname : : "$1"
        !          1849:     func_to_host_path_tmp1=$func_stripname_result
        !          1850:     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
        !          1851:     func_to_host_path_result="$func_convert_core_msys_to_w32_result"
        !          1852:     func_convert_path_check : ";" \
        !          1853:       "$func_to_host_path_tmp1" "$func_to_host_path_result"
        !          1854:     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
        !          1855:   fi
        !          1856: }
        !          1857: # end func_convert_path_msys_to_w32
1.1       misho    1858: 
                   1859: 
1.1.1.2 ! misho    1860: # func_convert_path_cygwin_to_w32 ARG
        !          1861: # Convert path ARG from Cygwin to w32 format.  Returns result in
        !          1862: # func_to_host_file_result.
        !          1863: func_convert_path_cygwin_to_w32 ()
        !          1864: {
        !          1865:   $opt_debug
        !          1866:   func_to_host_path_result="$1"
        !          1867:   if test -n "$1"; then
        !          1868:     # See func_convert_path_msys_to_w32:
        !          1869:     func_stripname : : "$1"
        !          1870:     func_to_host_path_tmp1=$func_stripname_result
        !          1871:     func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
        !          1872:     func_convert_path_check : ";" \
        !          1873:       "$func_to_host_path_tmp1" "$func_to_host_path_result"
        !          1874:     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
        !          1875:   fi
        !          1876: }
        !          1877: # end func_convert_path_cygwin_to_w32
1.1       misho    1878: 
                   1879: 
1.1.1.2 ! misho    1880: # func_convert_path_nix_to_w32 ARG
        !          1881: # Convert path ARG from *nix to w32 format.  Requires a wine environment and
        !          1882: # a working winepath.  Returns result in func_to_host_file_result.
        !          1883: func_convert_path_nix_to_w32 ()
        !          1884: {
        !          1885:   $opt_debug
        !          1886:   func_to_host_path_result="$1"
        !          1887:   if test -n "$1"; then
        !          1888:     # See func_convert_path_msys_to_w32:
        !          1889:     func_stripname : : "$1"
        !          1890:     func_to_host_path_tmp1=$func_stripname_result
        !          1891:     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
        !          1892:     func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
        !          1893:     func_convert_path_check : ";" \
        !          1894:       "$func_to_host_path_tmp1" "$func_to_host_path_result"
        !          1895:     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
        !          1896:   fi
        !          1897: }
        !          1898: # end func_convert_path_nix_to_w32
1.1       misho    1899: 
                   1900: 
1.1.1.2 ! misho    1901: # func_convert_path_msys_to_cygwin ARG
        !          1902: # Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
        !          1903: # Returns result in func_to_host_file_result.
        !          1904: func_convert_path_msys_to_cygwin ()
        !          1905: {
        !          1906:   $opt_debug
        !          1907:   func_to_host_path_result="$1"
        !          1908:   if test -n "$1"; then
        !          1909:     # See func_convert_path_msys_to_w32:
        !          1910:     func_stripname : : "$1"
        !          1911:     func_to_host_path_tmp1=$func_stripname_result
        !          1912:     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
        !          1913:     func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
        !          1914:     func_to_host_path_result="$func_cygpath_result"
        !          1915:     func_convert_path_check : : \
        !          1916:       "$func_to_host_path_tmp1" "$func_to_host_path_result"
        !          1917:     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
        !          1918:   fi
        !          1919: }
        !          1920: # end func_convert_path_msys_to_cygwin
1.1       misho    1921: 
                   1922: 
1.1.1.2 ! misho    1923: # func_convert_path_nix_to_cygwin ARG
        !          1924: # Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
        !          1925: # a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
        !          1926: # func_to_host_file_result.
        !          1927: func_convert_path_nix_to_cygwin ()
        !          1928: {
        !          1929:   $opt_debug
        !          1930:   func_to_host_path_result="$1"
        !          1931:   if test -n "$1"; then
        !          1932:     # Remove leading and trailing path separator characters from
        !          1933:     # ARG. msys behavior is inconsistent here, cygpath turns them
        !          1934:     # into '.;' and ';.', and winepath ignores them completely.
        !          1935:     func_stripname : : "$1"
        !          1936:     func_to_host_path_tmp1=$func_stripname_result
        !          1937:     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
        !          1938:     func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
        !          1939:     func_to_host_path_result="$func_cygpath_result"
        !          1940:     func_convert_path_check : : \
        !          1941:       "$func_to_host_path_tmp1" "$func_to_host_path_result"
        !          1942:     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
        !          1943:   fi
        !          1944: }
        !          1945: # end func_convert_path_nix_to_cygwin
1.1       misho    1946: 
                   1947: 
1.1.1.2 ! misho    1948: # func_mode_compile arg...
        !          1949: func_mode_compile ()
        !          1950: {
        !          1951:     $opt_debug
        !          1952:     # Get the compilation command and the source file.
        !          1953:     base_compile=
        !          1954:     srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
        !          1955:     suppress_opt=yes
        !          1956:     suppress_output=
        !          1957:     arg_mode=normal
        !          1958:     libobj=
        !          1959:     later=
        !          1960:     pie_flag=
1.1       misho    1961: 
1.1.1.2 ! misho    1962:     for arg
        !          1963:     do
        !          1964:       case $arg_mode in
        !          1965:       arg  )
        !          1966:        # do not "continue".  Instead, add this to base_compile
        !          1967:        lastarg="$arg"
        !          1968:        arg_mode=normal
        !          1969:        ;;
1.1       misho    1970: 
1.1.1.2 ! misho    1971:       target )
        !          1972:        libobj="$arg"
        !          1973:        arg_mode=normal
        !          1974:        continue
        !          1975:        ;;
1.1       misho    1976: 
1.1.1.2 ! misho    1977:       normal )
        !          1978:        # Accept any command-line options.
        !          1979:        case $arg in
        !          1980:        -o)
        !          1981:          test -n "$libobj" && \
        !          1982:            func_fatal_error "you cannot specify \`-o' more than once"
        !          1983:          arg_mode=target
        !          1984:          continue
        !          1985:          ;;
1.1       misho    1986: 
1.1.1.2 ! misho    1987:        -pie | -fpie | -fPIE)
        !          1988:           func_append pie_flag " $arg"
        !          1989:          continue
        !          1990:          ;;
1.1       misho    1991: 
1.1.1.2 ! misho    1992:        -shared | -static | -prefer-pic | -prefer-non-pic)
        !          1993:          func_append later " $arg"
        !          1994:          continue
        !          1995:          ;;
1.1       misho    1996: 
1.1.1.2 ! misho    1997:        -no-suppress)
        !          1998:          suppress_opt=no
        !          1999:          continue
        !          2000:          ;;
1.1       misho    2001: 
1.1.1.2 ! misho    2002:        -Xcompiler)
        !          2003:          arg_mode=arg  #  the next one goes into the "base_compile" arg list
        !          2004:          continue      #  The current "srcfile" will either be retained or
        !          2005:          ;;            #  replaced later.  I would guess that would be a bug.
1.1       misho    2006: 
1.1.1.2 ! misho    2007:        -Wc,*)
        !          2008:          func_stripname '-Wc,' '' "$arg"
        !          2009:          args=$func_stripname_result
        !          2010:          lastarg=
        !          2011:          save_ifs="$IFS"; IFS=','
        !          2012:          for arg in $args; do
        !          2013:            IFS="$save_ifs"
        !          2014:            func_append_quoted lastarg "$arg"
        !          2015:          done
        !          2016:          IFS="$save_ifs"
        !          2017:          func_stripname ' ' '' "$lastarg"
        !          2018:          lastarg=$func_stripname_result
1.1       misho    2019: 
1.1.1.2 ! misho    2020:          # Add the arguments to base_compile.
        !          2021:          func_append base_compile " $lastarg"
        !          2022:          continue
        !          2023:          ;;
        !          2024: 
        !          2025:        *)
        !          2026:          # Accept the current argument as the source file.
        !          2027:          # The previous "srcfile" becomes the current argument.
        !          2028:          #
        !          2029:          lastarg="$srcfile"
        !          2030:          srcfile="$arg"
        !          2031:          ;;
        !          2032:        esac  #  case $arg
1.1       misho    2033:        ;;
1.1.1.2 ! misho    2034:       esac    #  case $arg_mode
1.1       misho    2035: 
1.1.1.2 ! misho    2036:       # Aesthetically quote the previous argument.
        !          2037:       func_append_quoted base_compile "$lastarg"
        !          2038:     done # for arg
1.1       misho    2039: 
1.1.1.2 ! misho    2040:     case $arg_mode in
        !          2041:     arg)
        !          2042:       func_fatal_error "you must specify an argument for -Xcompile"
        !          2043:       ;;
        !          2044:     target)
        !          2045:       func_fatal_error "you must specify a target with \`-o'"
        !          2046:       ;;
        !          2047:     *)
        !          2048:       # Get the name of the library object.
        !          2049:       test -z "$libobj" && {
        !          2050:        func_basename "$srcfile"
        !          2051:        libobj="$func_basename_result"
        !          2052:       }
        !          2053:       ;;
        !          2054:     esac
        !          2055: 
        !          2056:     # Recognize several different file suffixes.
        !          2057:     # If the user specifies -o file.o, it is replaced with file.lo
        !          2058:     case $libobj in
        !          2059:     *.[cCFSifmso] | \
        !          2060:     *.ada | *.adb | *.ads | *.asm | \
        !          2061:     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
        !          2062:     *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
        !          2063:       func_xform "$libobj"
        !          2064:       libobj=$func_xform_result
        !          2065:       ;;
        !          2066:     esac
        !          2067: 
        !          2068:     case $libobj in
        !          2069:     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
        !          2070:     *)
        !          2071:       func_fatal_error "cannot determine name of library object from \`$libobj'"
        !          2072:       ;;
        !          2073:     esac
        !          2074: 
        !          2075:     func_infer_tag $base_compile
        !          2076: 
        !          2077:     for arg in $later; do
        !          2078:       case $arg in
        !          2079:       -shared)
        !          2080:        test "$build_libtool_libs" != yes && \
        !          2081:          func_fatal_configuration "can not build a shared library"
        !          2082:        build_old_libs=no
1.1       misho    2083:        continue
                   2084:        ;;
                   2085: 
1.1.1.2 ! misho    2086:       -static)
        !          2087:        build_libtool_libs=no
        !          2088:        build_old_libs=yes
        !          2089:        continue
1.1       misho    2090:        ;;
                   2091: 
1.1.1.2 ! misho    2092:       -prefer-pic)
        !          2093:        pic_mode=yes
        !          2094:        continue
        !          2095:        ;;
1.1       misho    2096: 
1.1.1.2 ! misho    2097:       -prefer-non-pic)
        !          2098:        pic_mode=no
        !          2099:        continue
        !          2100:        ;;
        !          2101:       esac
        !          2102:     done
1.1       misho    2103: 
1.1.1.2 ! misho    2104:     func_quote_for_eval "$libobj"
        !          2105:     test "X$libobj" != "X$func_quote_for_eval_result" \
        !          2106:       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'   &()|`$[]' \
        !          2107:       && func_warning "libobj name \`$libobj' may not contain shell special characters."
        !          2108:     func_dirname_and_basename "$obj" "/" ""
        !          2109:     objname="$func_basename_result"
        !          2110:     xdir="$func_dirname_result"
        !          2111:     lobj=${xdir}$objdir/$objname
1.1       misho    2112: 
1.1.1.2 ! misho    2113:     test -z "$base_compile" && \
        !          2114:       func_fatal_help "you must specify a compilation command"
1.1       misho    2115: 
1.1.1.2 ! misho    2116:     # Delete any leftover library objects.
        !          2117:     if test "$build_old_libs" = yes; then
        !          2118:       removelist="$obj $lobj $libobj ${libobj}T"
1.1       misho    2119:     else
1.1.1.2 ! misho    2120:       removelist="$lobj $libobj ${libobj}T"
        !          2121:     fi
        !          2122: 
        !          2123:     # On Cygwin there's no "real" PIC flag so we must build both object types
        !          2124:     case $host_os in
        !          2125:     cygwin* | mingw* | pw32* | os2* | cegcc*)
        !          2126:       pic_mode=default
        !          2127:       ;;
        !          2128:     esac
        !          2129:     if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
        !          2130:       # non-PIC code in shared libraries is not supported
        !          2131:       pic_mode=default
1.1       misho    2132:     fi
                   2133: 
1.1.1.2 ! misho    2134:     # Calculate the filename of the output object if compiler does
        !          2135:     # not support -o with -c
        !          2136:     if test "$compiler_c_o" = no; then
        !          2137:       output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
        !          2138:       lockfile="$output_obj.lock"
1.1       misho    2139:     else
1.1.1.2 ! misho    2140:       output_obj=
        !          2141:       need_locks=no
        !          2142:       lockfile=
1.1       misho    2143:     fi
1.1.1.2 ! misho    2144: 
        !          2145:     # Lock this critical section if it is needed
        !          2146:     # We use this script file to make the link, it avoids creating a new file
        !          2147:     if test "$need_locks" = yes; then
        !          2148:       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
        !          2149:        func_echo "Waiting for $lockfile to be removed"
        !          2150:        sleep 2
        !          2151:       done
        !          2152:     elif test "$need_locks" = warn; then
        !          2153:       if test -f "$lockfile"; then
        !          2154:        $ECHO "\
        !          2155: *** ERROR, $lockfile exists and contains:
        !          2156: `cat $lockfile 2>/dev/null`
        !          2157: 
        !          2158: This indicates that another process is trying to use the same
        !          2159: temporary object file, and libtool could not work around it because
        !          2160: your compiler does not support \`-c' and \`-o' together.  If you
        !          2161: repeat this compilation, it may succeed, by chance, but you had better
        !          2162: avoid parallel builds (make -j) in this platform, or get a better
        !          2163: compiler."
        !          2164: 
        !          2165:        $opt_dry_run || $RM $removelist
        !          2166:        exit $EXIT_FAILURE
1.1       misho    2167:       fi
1.1.1.2 ! misho    2168:       func_append removelist " $output_obj"
        !          2169:       $ECHO "$srcfile" > "$lockfile"
1.1       misho    2170:     fi
                   2171: 
1.1.1.2 ! misho    2172:     $opt_dry_run || $RM $removelist
        !          2173:     func_append removelist " $lockfile"
        !          2174:     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
        !          2175: 
        !          2176:     func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
        !          2177:     srcfile=$func_to_tool_file_result
        !          2178:     func_quote_for_eval "$srcfile"
        !          2179:     qsrcfile=$func_quote_for_eval_result
1.1       misho    2180: 
1.1.1.2 ! misho    2181:     # Only build a PIC object if we are building libtool libraries.
        !          2182:     if test "$build_libtool_libs" = yes; then
        !          2183:       # Without this assignment, base_compile gets emptied.
        !          2184:       fbsd_hideous_sh_bug=$base_compile
1.1       misho    2185: 
1.1.1.2 ! misho    2186:       if test "$pic_mode" != no; then
        !          2187:        command="$base_compile $qsrcfile $pic_flag"
        !          2188:       else
        !          2189:        # Don't build PIC code
        !          2190:        command="$base_compile $qsrcfile"
1.1       misho    2191:       fi
                   2192: 
1.1.1.2 ! misho    2193:       func_mkdir_p "$xdir$objdir"
1.1       misho    2194: 
1.1.1.2 ! misho    2195:       if test -z "$output_obj"; then
        !          2196:        # Place PIC objects in $objdir
        !          2197:        func_append command " -o $lobj"
        !          2198:       fi
        !          2199: 
        !          2200:       func_show_eval_locale "$command" \
        !          2201:           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
        !          2202: 
        !          2203:       if test "$need_locks" = warn &&
        !          2204:         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        !          2205:        $ECHO "\
        !          2206: *** ERROR, $lockfile contains:
        !          2207: `cat $lockfile 2>/dev/null`
        !          2208: 
        !          2209: but it should contain:
        !          2210: $srcfile
        !          2211: 
        !          2212: This indicates that another process is trying to use the same
        !          2213: temporary object file, and libtool could not work around it because
        !          2214: your compiler does not support \`-c' and \`-o' together.  If you
        !          2215: repeat this compilation, it may succeed, by chance, but you had better
        !          2216: avoid parallel builds (make -j) in this platform, or get a better
        !          2217: compiler."
        !          2218: 
        !          2219:        $opt_dry_run || $RM $removelist
        !          2220:        exit $EXIT_FAILURE
        !          2221:       fi
        !          2222: 
        !          2223:       # Just move the object if needed, then go on to compile the next one
        !          2224:       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
        !          2225:        func_show_eval '$MV "$output_obj" "$lobj"' \
        !          2226:          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
        !          2227:       fi
        !          2228: 
        !          2229:       # Allow error messages only from the first compilation.
        !          2230:       if test "$suppress_opt" = yes; then
        !          2231:        suppress_output=' >/dev/null 2>&1'
1.1       misho    2232:       fi
                   2233:     fi
                   2234: 
1.1.1.2 ! misho    2235:     # Only build a position-dependent object if we build old libraries.
        !          2236:     if test "$build_old_libs" = yes; then
        !          2237:       if test "$pic_mode" != yes; then
        !          2238:        # Don't build PIC code
        !          2239:        command="$base_compile $qsrcfile$pie_flag"
        !          2240:       else
        !          2241:        command="$base_compile $qsrcfile $pic_flag"
1.1       misho    2242:       fi
1.1.1.2 ! misho    2243:       if test "$compiler_c_o" = yes; then
        !          2244:        func_append command " -o $obj"
1.1       misho    2245:       fi
1.1.1.2 ! misho    2246: 
        !          2247:       # Suppress compiler output if we already did a PIC compilation.
        !          2248:       func_append command "$suppress_output"
        !          2249:       func_show_eval_locale "$command" \
        !          2250:         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
        !          2251: 
        !          2252:       if test "$need_locks" = warn &&
        !          2253:         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        !          2254:        $ECHO "\
        !          2255: *** ERROR, $lockfile contains:
        !          2256: `cat $lockfile 2>/dev/null`
        !          2257: 
        !          2258: but it should contain:
        !          2259: $srcfile
        !          2260: 
        !          2261: This indicates that another process is trying to use the same
        !          2262: temporary object file, and libtool could not work around it because
        !          2263: your compiler does not support \`-c' and \`-o' together.  If you
        !          2264: repeat this compilation, it may succeed, by chance, but you had better
        !          2265: avoid parallel builds (make -j) in this platform, or get a better
        !          2266: compiler."
        !          2267: 
        !          2268:        $opt_dry_run || $RM $removelist
        !          2269:        exit $EXIT_FAILURE
1.1       misho    2270:       fi
                   2271: 
1.1.1.2 ! misho    2272:       # Just move the object if needed
        !          2273:       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
        !          2274:        func_show_eval '$MV "$output_obj" "$obj"' \
        !          2275:          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
        !          2276:       fi
        !          2277:     fi
1.1       misho    2278: 
1.1.1.2 ! misho    2279:     $opt_dry_run || {
        !          2280:       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
1.1       misho    2281: 
1.1.1.2 ! misho    2282:       # Unlock the critical section if it was locked
        !          2283:       if test "$need_locks" != no; then
        !          2284:        removelist=$lockfile
        !          2285:         $RM "$lockfile"
        !          2286:       fi
        !          2287:     }
1.1       misho    2288: 
1.1.1.2 ! misho    2289:     exit $EXIT_SUCCESS
        !          2290: }
1.1       misho    2291: 
1.1.1.2 ! misho    2292: $opt_help || {
        !          2293:   test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
        !          2294: }
1.1       misho    2295: 
1.1.1.2 ! misho    2296: func_mode_help ()
        !          2297: {
        !          2298:     # We need to display help for each of the modes.
        !          2299:     case $opt_mode in
        !          2300:       "")
        !          2301:         # Generic help is extracted from the usage comments
        !          2302:         # at the start of this file.
        !          2303:         func_help
        !          2304:         ;;
1.1       misho    2305: 
1.1.1.2 ! misho    2306:       clean)
        !          2307:         $ECHO \
        !          2308: "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
1.1       misho    2309: 
1.1.1.2 ! misho    2310: Remove files from the build directory.
1.1       misho    2311: 
1.1.1.2 ! misho    2312: RM is the name of the program to use to delete files associated with each FILE
        !          2313: (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
        !          2314: to RM.
1.1       misho    2315: 
1.1.1.2 ! misho    2316: If FILE is a libtool library, object or program, all the files associated
        !          2317: with it are deleted. Otherwise, only FILE itself is deleted using RM."
        !          2318:         ;;
1.1       misho    2319: 
1.1.1.2 ! misho    2320:       compile)
        !          2321:       $ECHO \
        !          2322: "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
1.1       misho    2323: 
1.1.1.2 ! misho    2324: Compile a source file into a libtool library object.
1.1       misho    2325: 
1.1.1.2 ! misho    2326: This mode accepts the following additional options:
1.1       misho    2327: 
1.1.1.2 ! misho    2328:   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
        !          2329:   -no-suppress      do not suppress compiler output for multiple passes
        !          2330:   -prefer-pic       try to build PIC objects only
        !          2331:   -prefer-non-pic   try to build non-PIC objects only
        !          2332:   -shared           do not build a \`.o' file suitable for static linking
        !          2333:   -static           only build a \`.o' file suitable for static linking
        !          2334:   -Wc,FLAG          pass FLAG directly to the compiler
1.1       misho    2335: 
1.1.1.2 ! misho    2336: COMPILE-COMMAND is a command to be used in creating a \`standard' object file
        !          2337: from the given SOURCEFILE.
1.1       misho    2338: 
1.1.1.2 ! misho    2339: The output file name is determined by removing the directory component from
        !          2340: SOURCEFILE, then substituting the C source code suffix \`.c' with the
        !          2341: library object suffix, \`.lo'."
        !          2342:         ;;
1.1       misho    2343: 
1.1.1.2 ! misho    2344:       execute)
        !          2345:         $ECHO \
        !          2346: "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
1.1       misho    2347: 
1.1.1.2 ! misho    2348: Automatically set library path, then run a program.
1.1       misho    2349: 
1.1.1.2 ! misho    2350: This mode accepts the following additional options:
1.1       misho    2351: 
1.1.1.2 ! misho    2352:   -dlopen FILE      add the directory containing FILE to the library path
1.1       misho    2353: 
1.1.1.2 ! misho    2354: This mode sets the library path environment variable according to \`-dlopen'
        !          2355: flags.
1.1       misho    2356: 
1.1.1.2 ! misho    2357: If any of the ARGS are libtool executable wrappers, then they are translated
        !          2358: into their corresponding uninstalled binary, and any of their required library
        !          2359: directories are added to the library path.
1.1       misho    2360: 
1.1.1.2 ! misho    2361: Then, COMMAND is executed, with ARGS as arguments."
        !          2362:         ;;
1.1       misho    2363: 
1.1.1.2 ! misho    2364:       finish)
        !          2365:         $ECHO \
        !          2366: "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
1.1       misho    2367: 
1.1.1.2 ! misho    2368: Complete the installation of libtool libraries.
1.1       misho    2369: 
1.1.1.2 ! misho    2370: Each LIBDIR is a directory that contains libtool libraries.
1.1       misho    2371: 
1.1.1.2 ! misho    2372: The commands that this mode executes may require superuser privileges.  Use
        !          2373: the \`--dry-run' option if you just want to see what would be executed."
        !          2374:         ;;
1.1       misho    2375: 
1.1.1.2 ! misho    2376:       install)
        !          2377:         $ECHO \
        !          2378: "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
1.1       misho    2379: 
1.1.1.2 ! misho    2380: Install executables or libraries.
1.1       misho    2381: 
1.1.1.2 ! misho    2382: INSTALL-COMMAND is the installation command.  The first component should be
        !          2383: either the \`install' or \`cp' program.
1.1       misho    2384: 
1.1.1.2 ! misho    2385: The following components of INSTALL-COMMAND are treated specially:
        !          2386: 
        !          2387:   -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
        !          2388: 
        !          2389: The rest of the components are interpreted as arguments to that command (only
        !          2390: BSD-compatible install options are recognized)."
        !          2391:         ;;
        !          2392: 
        !          2393:       link)
        !          2394:         $ECHO \
        !          2395: "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
        !          2396: 
        !          2397: Link object files or libraries together to form another library, or to
        !          2398: create an executable program.
        !          2399: 
        !          2400: LINK-COMMAND is a command using the C compiler that you would use to create
        !          2401: a program from several object files.
        !          2402: 
        !          2403: The following components of LINK-COMMAND are treated specially:
        !          2404: 
        !          2405:   -all-static       do not do any dynamic linking at all
        !          2406:   -avoid-version    do not add a version suffix if possible
        !          2407:   -bindir BINDIR    specify path to binaries directory (for systems where
        !          2408:                     libraries must be found in the PATH setting at runtime)
        !          2409:   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
        !          2410:   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
        !          2411:   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
        !          2412:   -export-symbols SYMFILE
        !          2413:                     try to export only the symbols listed in SYMFILE
        !          2414:   -export-symbols-regex REGEX
        !          2415:                     try to export only the symbols matching REGEX
        !          2416:   -LLIBDIR          search LIBDIR for required installed libraries
        !          2417:   -lNAME            OUTPUT-FILE requires the installed library libNAME
        !          2418:   -module           build a library that can dlopened
        !          2419:   -no-fast-install  disable the fast-install mode
        !          2420:   -no-install       link a not-installable executable
        !          2421:   -no-undefined     declare that a library does not refer to external symbols
        !          2422:   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
        !          2423:   -objectlist FILE  Use a list of object files found in FILE to specify objects
        !          2424:   -precious-files-regex REGEX
        !          2425:                     don't remove output files matching REGEX
        !          2426:   -release RELEASE  specify package release information
        !          2427:   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
        !          2428:   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
        !          2429:   -shared           only do dynamic linking of libtool libraries
        !          2430:   -shrext SUFFIX    override the standard shared library file extension
        !          2431:   -static           do not do any dynamic linking of uninstalled libtool libraries
        !          2432:   -static-libtool-libs
        !          2433:                     do not do any dynamic linking of libtool libraries
        !          2434:   -version-info CURRENT[:REVISION[:AGE]]
        !          2435:                     specify library version info [each variable defaults to 0]
        !          2436:   -weak LIBNAME     declare that the target provides the LIBNAME interface
        !          2437:   -Wc,FLAG
        !          2438:   -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
        !          2439:   -Wl,FLAG
        !          2440:   -Xlinker FLAG     pass linker-specific FLAG directly to the linker
        !          2441:   -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
        !          2442: 
        !          2443: All other options (arguments beginning with \`-') are ignored.
        !          2444: 
        !          2445: Every other argument is treated as a filename.  Files ending in \`.la' are
        !          2446: treated as uninstalled libtool libraries, other files are standard or library
        !          2447: object files.
        !          2448: 
        !          2449: If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
        !          2450: only library objects (\`.lo' files) may be specified, and \`-rpath' is
        !          2451: required, except when creating a convenience library.
        !          2452: 
        !          2453: If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
        !          2454: using \`ar' and \`ranlib', or on Windows using \`lib'.
        !          2455: 
        !          2456: If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
        !          2457: is created, otherwise an executable program is created."
        !          2458:         ;;
        !          2459: 
        !          2460:       uninstall)
        !          2461:         $ECHO \
        !          2462: "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
        !          2463: 
        !          2464: Remove libraries from an installation directory.
        !          2465: 
        !          2466: RM is the name of the program to use to delete files associated with each FILE
        !          2467: (typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
        !          2468: to RM.
        !          2469: 
        !          2470: If FILE is a libtool library, all the files associated with it are deleted.
        !          2471: Otherwise, only FILE itself is deleted using RM."
        !          2472:         ;;
        !          2473: 
        !          2474:       *)
        !          2475:         func_fatal_help "invalid operation mode \`$opt_mode'"
        !          2476:         ;;
        !          2477:     esac
        !          2478: 
        !          2479:     echo
        !          2480:     $ECHO "Try \`$progname --help' for more information about other modes."
        !          2481: }
        !          2482: 
        !          2483: # Now that we've collected a possible --mode arg, show help if necessary
        !          2484: if $opt_help; then
        !          2485:   if test "$opt_help" = :; then
        !          2486:     func_mode_help
        !          2487:   else
        !          2488:     {
        !          2489:       func_help noexit
        !          2490:       for opt_mode in compile link execute install finish uninstall clean; do
        !          2491:        func_mode_help
        !          2492:       done
        !          2493:     } | sed -n '1p; 2,$s/^Usage:/  or: /p'
        !          2494:     {
        !          2495:       func_help noexit
        !          2496:       for opt_mode in compile link execute install finish uninstall clean; do
        !          2497:        echo
        !          2498:        func_mode_help
        !          2499:       done
        !          2500:     } |
        !          2501:     sed '1d
        !          2502:       /^When reporting/,/^Report/{
        !          2503:        H
        !          2504:        d
        !          2505:       }
        !          2506:       $x
        !          2507:       /information about other modes/d
        !          2508:       /more detailed .*MODE/d
        !          2509:       s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
        !          2510:   fi
        !          2511:   exit $?
        !          2512: fi
        !          2513: 
        !          2514: 
        !          2515: # func_mode_execute arg...
        !          2516: func_mode_execute ()
        !          2517: {
        !          2518:     $opt_debug
        !          2519:     # The first argument is the command name.
        !          2520:     cmd="$nonopt"
        !          2521:     test -z "$cmd" && \
        !          2522:       func_fatal_help "you must specify a COMMAND"
        !          2523: 
        !          2524:     # Handle -dlopen flags immediately.
        !          2525:     for file in $opt_dlopen; do
        !          2526:       test -f "$file" \
        !          2527:        || func_fatal_help "\`$file' is not a file"
        !          2528: 
        !          2529:       dir=
        !          2530:       case $file in
        !          2531:       *.la)
        !          2532:        func_resolve_sysroot "$file"
        !          2533:        file=$func_resolve_sysroot_result
        !          2534: 
        !          2535:        # Check to see that this really is a libtool archive.
        !          2536:        func_lalib_unsafe_p "$file" \
        !          2537:          || func_fatal_help "\`$lib' is not a valid libtool archive"
        !          2538: 
        !          2539:        # Read the libtool library.
        !          2540:        dlname=
        !          2541:        library_names=
        !          2542:        func_source "$file"
        !          2543: 
        !          2544:        # Skip this library if it cannot be dlopened.
        !          2545:        if test -z "$dlname"; then
        !          2546:          # Warn if it was a shared library.
        !          2547:          test -n "$library_names" && \
        !          2548:            func_warning "\`$file' was not linked with \`-export-dynamic'"
        !          2549:          continue
        !          2550:        fi
        !          2551: 
        !          2552:        func_dirname "$file" "" "."
        !          2553:        dir="$func_dirname_result"
        !          2554: 
        !          2555:        if test -f "$dir/$objdir/$dlname"; then
        !          2556:          func_append dir "/$objdir"
        !          2557:        else
        !          2558:          if test ! -f "$dir/$dlname"; then
        !          2559:            func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
        !          2560:          fi
        !          2561:        fi
        !          2562:        ;;
        !          2563: 
        !          2564:       *.lo)
        !          2565:        # Just add the directory containing the .lo file.
        !          2566:        func_dirname "$file" "" "."
        !          2567:        dir="$func_dirname_result"
        !          2568:        ;;
        !          2569: 
        !          2570:       *)
        !          2571:        func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
        !          2572:        continue
        !          2573:        ;;
        !          2574:       esac
        !          2575: 
        !          2576:       # Get the absolute pathname.
        !          2577:       absdir=`cd "$dir" && pwd`
        !          2578:       test -n "$absdir" && dir="$absdir"
        !          2579: 
        !          2580:       # Now add the directory to shlibpath_var.
        !          2581:       if eval "test -z \"\$$shlibpath_var\""; then
        !          2582:        eval "$shlibpath_var=\"\$dir\""
        !          2583:       else
        !          2584:        eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
        !          2585:       fi
        !          2586:     done
        !          2587: 
        !          2588:     # This variable tells wrapper scripts just to set shlibpath_var
        !          2589:     # rather than running their programs.
        !          2590:     libtool_execute_magic="$magic"
        !          2591: 
        !          2592:     # Check if any of the arguments is a wrapper script.
        !          2593:     args=
        !          2594:     for file
        !          2595:     do
        !          2596:       case $file in
        !          2597:       -* | *.la | *.lo ) ;;
        !          2598:       *)
        !          2599:        # Do a test to see if this is really a libtool program.
        !          2600:        if func_ltwrapper_script_p "$file"; then
        !          2601:          func_source "$file"
        !          2602:          # Transform arg to wrapped name.
        !          2603:          file="$progdir/$program"
        !          2604:        elif func_ltwrapper_executable_p "$file"; then
        !          2605:          func_ltwrapper_scriptname "$file"
        !          2606:          func_source "$func_ltwrapper_scriptname_result"
        !          2607:          # Transform arg to wrapped name.
        !          2608:          file="$progdir/$program"
        !          2609:        fi
        !          2610:        ;;
        !          2611:       esac
        !          2612:       # Quote arguments (to preserve shell metacharacters).
        !          2613:       func_append_quoted args "$file"
        !          2614:     done
        !          2615: 
        !          2616:     if test "X$opt_dry_run" = Xfalse; then
        !          2617:       if test -n "$shlibpath_var"; then
        !          2618:        # Export the shlibpath_var.
        !          2619:        eval "export $shlibpath_var"
        !          2620:       fi
        !          2621: 
        !          2622:       # Restore saved environment variables
        !          2623:       for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
        !          2624:       do
        !          2625:        eval "if test \"\${save_$lt_var+set}\" = set; then
        !          2626:                 $lt_var=\$save_$lt_var; export $lt_var
1.1       misho    2627:              else
1.1.1.2 ! misho    2628:                $lt_unset $lt_var
        !          2629:              fi"
        !          2630:       done
        !          2631: 
        !          2632:       # Now prepare to actually exec the command.
        !          2633:       exec_cmd="\$cmd$args"
        !          2634:     else
        !          2635:       # Display what would be done.
        !          2636:       if test -n "$shlibpath_var"; then
        !          2637:        eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
        !          2638:        echo "export $shlibpath_var"
        !          2639:       fi
        !          2640:       $ECHO "$cmd$args"
        !          2641:       exit $EXIT_SUCCESS
        !          2642:     fi
        !          2643: }
        !          2644: 
        !          2645: test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
        !          2646: 
        !          2647: 
        !          2648: # func_mode_finish arg...
        !          2649: func_mode_finish ()
        !          2650: {
        !          2651:     $opt_debug
        !          2652:     libs=
        !          2653:     libdirs=
        !          2654:     admincmds=
        !          2655: 
        !          2656:     for opt in "$nonopt" ${1+"$@"}
        !          2657:     do
        !          2658:       if test -d "$opt"; then
        !          2659:        func_append libdirs " $opt"
        !          2660: 
        !          2661:       elif test -f "$opt"; then
        !          2662:        if func_lalib_unsafe_p "$opt"; then
        !          2663:          func_append libs " $opt"
        !          2664:        else
        !          2665:          func_warning "\`$opt' is not a valid libtool archive"
        !          2666:        fi
        !          2667: 
        !          2668:       else
        !          2669:        func_fatal_error "invalid argument \`$opt'"
        !          2670:       fi
        !          2671:     done
        !          2672: 
        !          2673:     if test -n "$libs"; then
        !          2674:       if test -n "$lt_sysroot"; then
        !          2675:         sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
        !          2676:         sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
        !          2677:       else
        !          2678:         sysroot_cmd=
        !          2679:       fi
        !          2680: 
        !          2681:       # Remove sysroot references
        !          2682:       if $opt_dry_run; then
        !          2683:         for lib in $libs; do
        !          2684:           echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
        !          2685:         done
        !          2686:       else
        !          2687:         tmpdir=`func_mktempdir`
        !          2688:         for lib in $libs; do
        !          2689:          sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
        !          2690:            > $tmpdir/tmp-la
        !          2691:          mv -f $tmpdir/tmp-la $lib
        !          2692:        done
        !          2693:         ${RM}r "$tmpdir"
        !          2694:       fi
        !          2695:     fi
        !          2696: 
        !          2697:     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
        !          2698:       for libdir in $libdirs; do
        !          2699:        if test -n "$finish_cmds"; then
        !          2700:          # Do each command in the finish commands.
        !          2701:          func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
        !          2702: '"$cmd"'"'
        !          2703:        fi
        !          2704:        if test -n "$finish_eval"; then
        !          2705:          # Do the single finish_eval.
        !          2706:          eval cmds=\"$finish_eval\"
        !          2707:          $opt_dry_run || eval "$cmds" || func_append admincmds "
        !          2708:        $cmds"
        !          2709:        fi
        !          2710:       done
        !          2711:     fi
        !          2712: 
        !          2713:     # Exit here if they wanted silent mode.
        !          2714:     $opt_silent && exit $EXIT_SUCCESS
        !          2715: 
        !          2716:     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
        !          2717:       echo "----------------------------------------------------------------------"
        !          2718:       echo "Libraries have been installed in:"
        !          2719:       for libdir in $libdirs; do
        !          2720:        $ECHO "   $libdir"
        !          2721:       done
        !          2722:       echo
        !          2723:       echo "If you ever happen to want to link against installed libraries"
        !          2724:       echo "in a given directory, LIBDIR, you must either use libtool, and"
        !          2725:       echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
        !          2726:       echo "flag during linking and do at least one of the following:"
        !          2727:       if test -n "$shlibpath_var"; then
        !          2728:        echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
        !          2729:        echo "     during execution"
        !          2730:       fi
        !          2731:       if test -n "$runpath_var"; then
        !          2732:        echo "   - add LIBDIR to the \`$runpath_var' environment variable"
        !          2733:        echo "     during linking"
        !          2734:       fi
        !          2735:       if test -n "$hardcode_libdir_flag_spec"; then
        !          2736:        libdir=LIBDIR
        !          2737:        eval flag=\"$hardcode_libdir_flag_spec\"
        !          2738: 
        !          2739:        $ECHO "   - use the \`$flag' linker flag"
        !          2740:       fi
        !          2741:       if test -n "$admincmds"; then
        !          2742:        $ECHO "   - have your system administrator run these commands:$admincmds"
        !          2743:       fi
        !          2744:       if test -f /etc/ld.so.conf; then
        !          2745:        echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
        !          2746:       fi
        !          2747:       echo
        !          2748: 
        !          2749:       echo "See any operating system documentation about shared libraries for"
        !          2750:       case $host in
        !          2751:        solaris2.[6789]|solaris2.1[0-9])
        !          2752:          echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
        !          2753:          echo "pages."
        !          2754:          ;;
        !          2755:        *)
        !          2756:          echo "more information, such as the ld(1) and ld.so(8) manual pages."
        !          2757:          ;;
        !          2758:       esac
        !          2759:       echo "----------------------------------------------------------------------"
        !          2760:     fi
        !          2761:     exit $EXIT_SUCCESS
        !          2762: }
        !          2763: 
        !          2764: test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
        !          2765: 
        !          2766: 
        !          2767: # func_mode_install arg...
        !          2768: func_mode_install ()
        !          2769: {
        !          2770:     $opt_debug
        !          2771:     # There may be an optional sh(1) argument at the beginning of
        !          2772:     # install_prog (especially on Windows NT).
        !          2773:     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        !          2774:        # Allow the use of GNU shtool's install command.
        !          2775:        case $nonopt in *shtool*) :;; *) false;; esac; then
        !          2776:       # Aesthetically quote it.
        !          2777:       func_quote_for_eval "$nonopt"
        !          2778:       install_prog="$func_quote_for_eval_result "
        !          2779:       arg=$1
        !          2780:       shift
        !          2781:     else
        !          2782:       install_prog=
        !          2783:       arg=$nonopt
        !          2784:     fi
        !          2785: 
        !          2786:     # The real first argument should be the name of the installation program.
        !          2787:     # Aesthetically quote it.
        !          2788:     func_quote_for_eval "$arg"
        !          2789:     func_append install_prog "$func_quote_for_eval_result"
        !          2790:     install_shared_prog=$install_prog
        !          2791:     case " $install_prog " in
        !          2792:       *[\\\ /]cp\ *) install_cp=: ;;
        !          2793:       *) install_cp=false ;;
        !          2794:     esac
        !          2795: 
        !          2796:     # We need to accept at least all the BSD install flags.
        !          2797:     dest=
        !          2798:     files=
        !          2799:     opts=
        !          2800:     prev=
        !          2801:     install_type=
        !          2802:     isdir=no
        !          2803:     stripme=
        !          2804:     no_mode=:
        !          2805:     for arg
        !          2806:     do
        !          2807:       arg2=
        !          2808:       if test -n "$dest"; then
        !          2809:        func_append files " $dest"
        !          2810:        dest=$arg
        !          2811:        continue
        !          2812:       fi
        !          2813: 
        !          2814:       case $arg in
        !          2815:       -d) isdir=yes ;;
        !          2816:       -f)
        !          2817:        if $install_cp; then :; else
        !          2818:          prev=$arg
        !          2819:        fi
        !          2820:        ;;
        !          2821:       -g | -m | -o)
        !          2822:        prev=$arg
        !          2823:        ;;
        !          2824:       -s)
        !          2825:        stripme=" -s"
        !          2826:        continue
        !          2827:        ;;
        !          2828:       -*)
        !          2829:        ;;
        !          2830:       *)
        !          2831:        # If the previous option needed an argument, then skip it.
        !          2832:        if test -n "$prev"; then
        !          2833:          if test "x$prev" = x-m && test -n "$install_override_mode"; then
        !          2834:            arg2=$install_override_mode
        !          2835:            no_mode=false
        !          2836:          fi
        !          2837:          prev=
        !          2838:        else
        !          2839:          dest=$arg
        !          2840:          continue
        !          2841:        fi
        !          2842:        ;;
        !          2843:       esac
        !          2844: 
        !          2845:       # Aesthetically quote the argument.
        !          2846:       func_quote_for_eval "$arg"
        !          2847:       func_append install_prog " $func_quote_for_eval_result"
        !          2848:       if test -n "$arg2"; then
        !          2849:        func_quote_for_eval "$arg2"
        !          2850:       fi
        !          2851:       func_append install_shared_prog " $func_quote_for_eval_result"
        !          2852:     done
        !          2853: 
        !          2854:     test -z "$install_prog" && \
        !          2855:       func_fatal_help "you must specify an install program"
        !          2856: 
        !          2857:     test -n "$prev" && \
        !          2858:       func_fatal_help "the \`$prev' option requires an argument"
        !          2859: 
        !          2860:     if test -n "$install_override_mode" && $no_mode; then
        !          2861:       if $install_cp; then :; else
        !          2862:        func_quote_for_eval "$install_override_mode"
        !          2863:        func_append install_shared_prog " -m $func_quote_for_eval_result"
        !          2864:       fi
        !          2865:     fi
        !          2866: 
        !          2867:     if test -z "$files"; then
        !          2868:       if test -z "$dest"; then
        !          2869:        func_fatal_help "no file or destination specified"
        !          2870:       else
        !          2871:        func_fatal_help "you must specify a destination"
        !          2872:       fi
        !          2873:     fi
        !          2874: 
        !          2875:     # Strip any trailing slash from the destination.
        !          2876:     func_stripname '' '/' "$dest"
        !          2877:     dest=$func_stripname_result
        !          2878: 
        !          2879:     # Check to see that the destination is a directory.
        !          2880:     test -d "$dest" && isdir=yes
        !          2881:     if test "$isdir" = yes; then
        !          2882:       destdir="$dest"
        !          2883:       destname=
        !          2884:     else
        !          2885:       func_dirname_and_basename "$dest" "" "."
        !          2886:       destdir="$func_dirname_result"
        !          2887:       destname="$func_basename_result"
        !          2888: 
        !          2889:       # Not a directory, so check to see that there is only one file specified.
        !          2890:       set dummy $files; shift
        !          2891:       test "$#" -gt 1 && \
        !          2892:        func_fatal_help "\`$dest' is not a directory"
        !          2893:     fi
        !          2894:     case $destdir in
        !          2895:     [\\/]* | [A-Za-z]:[\\/]*) ;;
        !          2896:     *)
        !          2897:       for file in $files; do
        !          2898:        case $file in
        !          2899:        *.lo) ;;
        !          2900:        *)
        !          2901:          func_fatal_help "\`$destdir' must be an absolute directory name"
        !          2902:          ;;
        !          2903:        esac
        !          2904:       done
        !          2905:       ;;
        !          2906:     esac
        !          2907: 
        !          2908:     # This variable tells wrapper scripts just to set variables rather
        !          2909:     # than running their programs.
        !          2910:     libtool_install_magic="$magic"
        !          2911: 
        !          2912:     staticlibs=
        !          2913:     future_libdirs=
        !          2914:     current_libdirs=
        !          2915:     for file in $files; do
        !          2916: 
        !          2917:       # Do each installation.
        !          2918:       case $file in
        !          2919:       *.$libext)
        !          2920:        # Do the static libraries later.
        !          2921:        func_append staticlibs " $file"
        !          2922:        ;;
        !          2923: 
        !          2924:       *.la)
        !          2925:        func_resolve_sysroot "$file"
        !          2926:        file=$func_resolve_sysroot_result
        !          2927: 
        !          2928:        # Check to see that this really is a libtool archive.
        !          2929:        func_lalib_unsafe_p "$file" \
        !          2930:          || func_fatal_help "\`$file' is not a valid libtool archive"
        !          2931: 
        !          2932:        library_names=
        !          2933:        old_library=
        !          2934:        relink_command=
        !          2935:        func_source "$file"
        !          2936: 
        !          2937:        # Add the libdir to current_libdirs if it is the destination.
        !          2938:        if test "X$destdir" = "X$libdir"; then
        !          2939:          case "$current_libdirs " in
        !          2940:          *" $libdir "*) ;;
        !          2941:          *) func_append current_libdirs " $libdir" ;;
        !          2942:          esac
        !          2943:        else
        !          2944:          # Note the libdir as a future libdir.
        !          2945:          case "$future_libdirs " in
        !          2946:          *" $libdir "*) ;;
        !          2947:          *) func_append future_libdirs " $libdir" ;;
        !          2948:          esac
        !          2949:        fi
        !          2950: 
        !          2951:        func_dirname "$file" "/" ""
        !          2952:        dir="$func_dirname_result"
        !          2953:        func_append dir "$objdir"
        !          2954: 
        !          2955:        if test -n "$relink_command"; then
        !          2956:          # Determine the prefix the user has applied to our future dir.
        !          2957:          inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
        !          2958: 
        !          2959:          # Don't allow the user to place us outside of our expected
        !          2960:          # location b/c this prevents finding dependent libraries that
        !          2961:          # are installed to the same prefix.
        !          2962:          # At present, this check doesn't affect windows .dll's that
        !          2963:          # are installed into $libdir/../bin (currently, that works fine)
        !          2964:          # but it's something to keep an eye on.
        !          2965:          test "$inst_prefix_dir" = "$destdir" && \
        !          2966:            func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
        !          2967: 
        !          2968:          if test -n "$inst_prefix_dir"; then
        !          2969:            # Stick the inst_prefix_dir data into the link command.
        !          2970:            relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
        !          2971:          else
        !          2972:            relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
        !          2973:          fi
        !          2974: 
        !          2975:          func_warning "relinking \`$file'"
        !          2976:          func_show_eval "$relink_command" \
        !          2977:            'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
        !          2978:        fi
        !          2979: 
        !          2980:        # See the names of the shared library.
        !          2981:        set dummy $library_names; shift
        !          2982:        if test -n "$1"; then
        !          2983:          realname="$1"
        !          2984:          shift
        !          2985: 
        !          2986:          srcname="$realname"
        !          2987:          test -n "$relink_command" && srcname="$realname"T
        !          2988: 
        !          2989:          # Install the shared library and build the symlinks.
        !          2990:          func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
        !          2991:              'exit $?'
        !          2992:          tstripme="$stripme"
        !          2993:          case $host_os in
        !          2994:          cygwin* | mingw* | pw32* | cegcc*)
        !          2995:            case $realname in
        !          2996:            *.dll.a)
        !          2997:              tstripme=""
        !          2998:              ;;
        !          2999:            esac
        !          3000:            ;;
        !          3001:          esac
        !          3002:          if test -n "$tstripme" && test -n "$striplib"; then
        !          3003:            func_show_eval "$striplib $destdir/$realname" 'exit $?'
        !          3004:          fi
        !          3005: 
        !          3006:          if test "$#" -gt 0; then
        !          3007:            # Delete the old symlinks, and create new ones.
        !          3008:            # Try `ln -sf' first, because the `ln' binary might depend on
        !          3009:            # the symlink we replace!  Solaris /bin/ln does not understand -f,
        !          3010:            # so we also need to try rm && ln -s.
        !          3011:            for linkname
        !          3012:            do
        !          3013:              test "$linkname" != "$realname" \
        !          3014:                && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
        !          3015:            done
        !          3016:          fi
        !          3017: 
        !          3018:          # Do each command in the postinstall commands.
        !          3019:          lib="$destdir/$realname"
        !          3020:          func_execute_cmds "$postinstall_cmds" 'exit $?'
        !          3021:        fi
        !          3022: 
        !          3023:        # Install the pseudo-library for information purposes.
        !          3024:        func_basename "$file"
        !          3025:        name="$func_basename_result"
        !          3026:        instname="$dir/$name"i
        !          3027:        func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
        !          3028: 
        !          3029:        # Maybe install the static library, too.
        !          3030:        test -n "$old_library" && func_append staticlibs " $dir/$old_library"
        !          3031:        ;;
        !          3032: 
        !          3033:       *.lo)
        !          3034:        # Install (i.e. copy) a libtool object.
        !          3035: 
        !          3036:        # Figure out destination file name, if it wasn't already specified.
        !          3037:        if test -n "$destname"; then
        !          3038:          destfile="$destdir/$destname"
        !          3039:        else
        !          3040:          func_basename "$file"
        !          3041:          destfile="$func_basename_result"
        !          3042:          destfile="$destdir/$destfile"
        !          3043:        fi
        !          3044: 
        !          3045:        # Deduce the name of the destination old-style object file.
        !          3046:        case $destfile in
        !          3047:        *.lo)
        !          3048:          func_lo2o "$destfile"
        !          3049:          staticdest=$func_lo2o_result
        !          3050:          ;;
        !          3051:        *.$objext)
        !          3052:          staticdest="$destfile"
        !          3053:          destfile=
        !          3054:          ;;
        !          3055:        *)
        !          3056:          func_fatal_help "cannot copy a libtool object to \`$destfile'"
        !          3057:          ;;
        !          3058:        esac
        !          3059: 
        !          3060:        # Install the libtool object if requested.
        !          3061:        test -n "$destfile" && \
        !          3062:          func_show_eval "$install_prog $file $destfile" 'exit $?'
        !          3063: 
        !          3064:        # Install the old object if enabled.
        !          3065:        if test "$build_old_libs" = yes; then
        !          3066:          # Deduce the name of the old-style object file.
        !          3067:          func_lo2o "$file"
        !          3068:          staticobj=$func_lo2o_result
        !          3069:          func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
        !          3070:        fi
        !          3071:        exit $EXIT_SUCCESS
        !          3072:        ;;
        !          3073: 
        !          3074:       *)
        !          3075:        # Figure out destination file name, if it wasn't already specified.
        !          3076:        if test -n "$destname"; then
        !          3077:          destfile="$destdir/$destname"
        !          3078:        else
        !          3079:          func_basename "$file"
        !          3080:          destfile="$func_basename_result"
        !          3081:          destfile="$destdir/$destfile"
        !          3082:        fi
        !          3083: 
        !          3084:        # If the file is missing, and there is a .exe on the end, strip it
        !          3085:        # because it is most likely a libtool script we actually want to
        !          3086:        # install
        !          3087:        stripped_ext=""
        !          3088:        case $file in
        !          3089:          *.exe)
        !          3090:            if test ! -f "$file"; then
        !          3091:              func_stripname '' '.exe' "$file"
        !          3092:              file=$func_stripname_result
        !          3093:              stripped_ext=".exe"
        !          3094:            fi
        !          3095:            ;;
        !          3096:        esac
        !          3097: 
        !          3098:        # Do a test to see if this is really a libtool program.
        !          3099:        case $host in
        !          3100:        *cygwin* | *mingw*)
        !          3101:            if func_ltwrapper_executable_p "$file"; then
        !          3102:              func_ltwrapper_scriptname "$file"
        !          3103:              wrapper=$func_ltwrapper_scriptname_result
        !          3104:            else
        !          3105:              func_stripname '' '.exe' "$file"
        !          3106:              wrapper=$func_stripname_result
        !          3107:            fi
        !          3108:            ;;
        !          3109:        *)
        !          3110:            wrapper=$file
        !          3111:            ;;
        !          3112:        esac
        !          3113:        if func_ltwrapper_script_p "$wrapper"; then
        !          3114:          notinst_deplibs=
        !          3115:          relink_command=
        !          3116: 
        !          3117:          func_source "$wrapper"
        !          3118: 
        !          3119:          # Check the variables that should have been set.
        !          3120:          test -z "$generated_by_libtool_version" && \
        !          3121:            func_fatal_error "invalid libtool wrapper script \`$wrapper'"
        !          3122: 
        !          3123:          finalize=yes
        !          3124:          for lib in $notinst_deplibs; do
        !          3125:            # Check to see that each library is installed.
        !          3126:            libdir=
        !          3127:            if test -f "$lib"; then
        !          3128:              func_source "$lib"
        !          3129:            fi
        !          3130:            libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
        !          3131:            if test -n "$libdir" && test ! -f "$libfile"; then
        !          3132:              func_warning "\`$lib' has not been installed in \`$libdir'"
        !          3133:              finalize=no
        !          3134:            fi
        !          3135:          done
        !          3136: 
        !          3137:          relink_command=
        !          3138:          func_source "$wrapper"
        !          3139: 
        !          3140:          outputname=
        !          3141:          if test "$fast_install" = no && test -n "$relink_command"; then
        !          3142:            $opt_dry_run || {
        !          3143:              if test "$finalize" = yes; then
        !          3144:                tmpdir=`func_mktempdir`
        !          3145:                func_basename "$file$stripped_ext"
        !          3146:                file="$func_basename_result"
        !          3147:                outputname="$tmpdir/$file"
        !          3148:                # Replace the output file specification.
        !          3149:                relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
        !          3150: 
        !          3151:                $opt_silent || {
        !          3152:                  func_quote_for_expand "$relink_command"
        !          3153:                  eval "func_echo $func_quote_for_expand_result"
        !          3154:                }
        !          3155:                if eval "$relink_command"; then :
        !          3156:                  else
        !          3157:                  func_error "error: relink \`$file' with the above command before installing it"
        !          3158:                  $opt_dry_run || ${RM}r "$tmpdir"
        !          3159:                  continue
        !          3160:                fi
        !          3161:                file="$outputname"
        !          3162:              else
        !          3163:                func_warning "cannot relink \`$file'"
        !          3164:              fi
        !          3165:            }
        !          3166:          else
        !          3167:            # Install the binary that we compiled earlier.
        !          3168:            file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
        !          3169:          fi
        !          3170:        fi
        !          3171: 
        !          3172:        # remove .exe since cygwin /usr/bin/install will append another
        !          3173:        # one anyway
        !          3174:        case $install_prog,$host in
        !          3175:        */usr/bin/install*,*cygwin*)
        !          3176:          case $file:$destfile in
        !          3177:          *.exe:*.exe)
        !          3178:            # this is ok
        !          3179:            ;;
        !          3180:          *.exe:*)
        !          3181:            destfile=$destfile.exe
        !          3182:            ;;
        !          3183:          *:*.exe)
        !          3184:            func_stripname '' '.exe' "$destfile"
        !          3185:            destfile=$func_stripname_result
        !          3186:            ;;
        !          3187:          esac
        !          3188:          ;;
        !          3189:        esac
        !          3190:        func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
        !          3191:        $opt_dry_run || if test -n "$outputname"; then
        !          3192:          ${RM}r "$tmpdir"
        !          3193:        fi
        !          3194:        ;;
        !          3195:       esac
        !          3196:     done
        !          3197: 
        !          3198:     for file in $staticlibs; do
        !          3199:       func_basename "$file"
        !          3200:       name="$func_basename_result"
        !          3201: 
        !          3202:       # Set up the ranlib parameters.
        !          3203:       oldlib="$destdir/$name"
        !          3204: 
        !          3205:       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
        !          3206: 
        !          3207:       if test -n "$stripme" && test -n "$old_striplib"; then
        !          3208:        func_show_eval "$old_striplib $oldlib" 'exit $?'
        !          3209:       fi
        !          3210: 
        !          3211:       # Do each command in the postinstall commands.
        !          3212:       func_execute_cmds "$old_postinstall_cmds" 'exit $?'
        !          3213:     done
        !          3214: 
        !          3215:     test -n "$future_libdirs" && \
        !          3216:       func_warning "remember to run \`$progname --finish$future_libdirs'"
        !          3217: 
        !          3218:     if test -n "$current_libdirs"; then
        !          3219:       # Maybe just do a dry run.
        !          3220:       $opt_dry_run && current_libdirs=" -n$current_libdirs"
        !          3221:       exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
        !          3222:     else
        !          3223:       exit $EXIT_SUCCESS
        !          3224:     fi
        !          3225: }
        !          3226: 
        !          3227: test "$opt_mode" = install && func_mode_install ${1+"$@"}
        !          3228: 
        !          3229: 
        !          3230: # func_generate_dlsyms outputname originator pic_p
        !          3231: # Extract symbols from dlprefiles and create ${outputname}S.o with
        !          3232: # a dlpreopen symbol table.
        !          3233: func_generate_dlsyms ()
        !          3234: {
        !          3235:     $opt_debug
        !          3236:     my_outputname="$1"
        !          3237:     my_originator="$2"
        !          3238:     my_pic_p="${3-no}"
        !          3239:     my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
        !          3240:     my_dlsyms=
        !          3241: 
        !          3242:     if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        !          3243:       if test -n "$NM" && test -n "$global_symbol_pipe"; then
        !          3244:        my_dlsyms="${my_outputname}S.c"
        !          3245:       else
        !          3246:        func_error "not configured to extract global symbols from dlpreopened files"
        !          3247:       fi
        !          3248:     fi
        !          3249: 
        !          3250:     if test -n "$my_dlsyms"; then
        !          3251:       case $my_dlsyms in
        !          3252:       "") ;;
        !          3253:       *.c)
        !          3254:        # Discover the nlist of each of the dlfiles.
        !          3255:        nlist="$output_objdir/${my_outputname}.nm"
        !          3256: 
        !          3257:        func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
        !          3258: 
        !          3259:        # Parse the name list into a source file.
        !          3260:        func_verbose "creating $output_objdir/$my_dlsyms"
        !          3261: 
        !          3262:        $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
        !          3263: /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
        !          3264: /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
        !          3265: 
        !          3266: #ifdef __cplusplus
        !          3267: extern \"C\" {
        !          3268: #endif
        !          3269: 
        !          3270: #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
        !          3271: #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
        !          3272: #endif
        !          3273: 
        !          3274: /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
        !          3275: #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
        !          3276: /* DATA imports from DLLs on WIN32 con't be const, because runtime
        !          3277:    relocations are performed -- see ld's documentation on pseudo-relocs.  */
        !          3278: # define LT_DLSYM_CONST
        !          3279: #elif defined(__osf__)
        !          3280: /* This system does not cope well with relocations in const data.  */
        !          3281: # define LT_DLSYM_CONST
        !          3282: #else
        !          3283: # define LT_DLSYM_CONST const
        !          3284: #endif
        !          3285: 
        !          3286: /* External symbol declarations for the compiler. */\
        !          3287: "
        !          3288: 
        !          3289:        if test "$dlself" = yes; then
        !          3290:          func_verbose "generating symbol list for \`$output'"
        !          3291: 
        !          3292:          $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
        !          3293: 
        !          3294:          # Add our own program objects to the symbol list.
        !          3295:          progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
        !          3296:          for progfile in $progfiles; do
        !          3297:            func_to_tool_file "$progfile" func_convert_file_msys_to_w32
        !          3298:            func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
        !          3299:            $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
        !          3300:          done
        !          3301: 
        !          3302:          if test -n "$exclude_expsyms"; then
        !          3303:            $opt_dry_run || {
        !          3304:              eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
        !          3305:              eval '$MV "$nlist"T "$nlist"'
        !          3306:            }
        !          3307:          fi
        !          3308: 
        !          3309:          if test -n "$export_symbols_regex"; then
        !          3310:            $opt_dry_run || {
        !          3311:              eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
        !          3312:              eval '$MV "$nlist"T "$nlist"'
        !          3313:            }
        !          3314:          fi
        !          3315: 
        !          3316:          # Prepare the list of exported symbols
        !          3317:          if test -z "$export_symbols"; then
        !          3318:            export_symbols="$output_objdir/$outputname.exp"
        !          3319:            $opt_dry_run || {
        !          3320:              $RM $export_symbols
        !          3321:              eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
        !          3322:              case $host in
        !          3323:              *cygwin* | *mingw* | *cegcc* )
        !          3324:                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
        !          3325:                 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
        !          3326:                ;;
        !          3327:              esac
        !          3328:            }
        !          3329:          else
        !          3330:            $opt_dry_run || {
        !          3331:              eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
        !          3332:              eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
        !          3333:              eval '$MV "$nlist"T "$nlist"'
        !          3334:              case $host in
        !          3335:                *cygwin* | *mingw* | *cegcc* )
        !          3336:                  eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
        !          3337:                  eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
        !          3338:                  ;;
        !          3339:              esac
        !          3340:            }
        !          3341:          fi
        !          3342:        fi
        !          3343: 
        !          3344:        for dlprefile in $dlprefiles; do
        !          3345:          func_verbose "extracting global C symbols from \`$dlprefile'"
        !          3346:          func_basename "$dlprefile"
        !          3347:          name="$func_basename_result"
        !          3348:           case $host in
        !          3349:            *cygwin* | *mingw* | *cegcc* )
        !          3350:              # if an import library, we need to obtain dlname
        !          3351:              if func_win32_import_lib_p "$dlprefile"; then
        !          3352:                func_tr_sh "$dlprefile"
        !          3353:                eval "curr_lafile=\$libfile_$func_tr_sh_result"
        !          3354:                dlprefile_dlbasename=""
        !          3355:                if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
        !          3356:                  # Use subshell, to avoid clobbering current variable values
        !          3357:                  dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
        !          3358:                  if test -n "$dlprefile_dlname" ; then
        !          3359:                    func_basename "$dlprefile_dlname"
        !          3360:                    dlprefile_dlbasename="$func_basename_result"
        !          3361:                  else
        !          3362:                    # no lafile. user explicitly requested -dlpreopen <import library>.
        !          3363:                    $sharedlib_from_linklib_cmd "$dlprefile"
        !          3364:                    dlprefile_dlbasename=$sharedlib_from_linklib_result
        !          3365:                  fi
        !          3366:                fi
        !          3367:                $opt_dry_run || {
        !          3368:                  if test -n "$dlprefile_dlbasename" ; then
        !          3369:                    eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
        !          3370:                  else
        !          3371:                    func_warning "Could not compute DLL name from $name"
        !          3372:                    eval '$ECHO ": $name " >> "$nlist"'
        !          3373:                  fi
        !          3374:                  func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
        !          3375:                  eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
        !          3376:                    $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
        !          3377:                }
        !          3378:              else # not an import lib
        !          3379:                $opt_dry_run || {
        !          3380:                  eval '$ECHO ": $name " >> "$nlist"'
        !          3381:                  func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
        !          3382:                  eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
        !          3383:                }
        !          3384:              fi
        !          3385:            ;;
        !          3386:            *)
        !          3387:              $opt_dry_run || {
        !          3388:                eval '$ECHO ": $name " >> "$nlist"'
        !          3389:                func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
        !          3390:                eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
        !          3391:              }
        !          3392:            ;;
        !          3393:           esac
        !          3394:        done
        !          3395: 
        !          3396:        $opt_dry_run || {
        !          3397:          # Make sure we have at least an empty file.
        !          3398:          test -f "$nlist" || : > "$nlist"
        !          3399: 
        !          3400:          if test -n "$exclude_expsyms"; then
        !          3401:            $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
        !          3402:            $MV "$nlist"T "$nlist"
        !          3403:          fi
        !          3404: 
        !          3405:          # Try sorting and uniquifying the output.
        !          3406:          if $GREP -v "^: " < "$nlist" |
        !          3407:              if sort -k 3 </dev/null >/dev/null 2>&1; then
        !          3408:                sort -k 3
        !          3409:              else
        !          3410:                sort +2
        !          3411:              fi |
        !          3412:              uniq > "$nlist"S; then
        !          3413:            :
        !          3414:          else
        !          3415:            $GREP -v "^: " < "$nlist" > "$nlist"S
        !          3416:          fi
        !          3417: 
        !          3418:          if test -f "$nlist"S; then
        !          3419:            eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
        !          3420:          else
        !          3421:            echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
        !          3422:          fi
        !          3423: 
        !          3424:          echo >> "$output_objdir/$my_dlsyms" "\
        !          3425: 
        !          3426: /* The mapping between symbol names and symbols.  */
        !          3427: typedef struct {
        !          3428:   const char *name;
        !          3429:   void *address;
        !          3430: } lt_dlsymlist;
        !          3431: extern LT_DLSYM_CONST lt_dlsymlist
        !          3432: lt_${my_prefix}_LTX_preloaded_symbols[];
        !          3433: LT_DLSYM_CONST lt_dlsymlist
        !          3434: lt_${my_prefix}_LTX_preloaded_symbols[] =
        !          3435: {\
        !          3436:   { \"$my_originator\", (void *) 0 },"
        !          3437: 
        !          3438:          case $need_lib_prefix in
        !          3439:          no)
        !          3440:            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
        !          3441:            ;;
        !          3442:          *)
        !          3443:            eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
        !          3444:            ;;
        !          3445:          esac
        !          3446:          echo >> "$output_objdir/$my_dlsyms" "\
        !          3447:   {0, (void *) 0}
        !          3448: };
        !          3449: 
        !          3450: /* This works around a problem in FreeBSD linker */
        !          3451: #ifdef FREEBSD_WORKAROUND
        !          3452: static const void *lt_preloaded_setup() {
        !          3453:   return lt_${my_prefix}_LTX_preloaded_symbols;
        !          3454: }
        !          3455: #endif
        !          3456: 
        !          3457: #ifdef __cplusplus
        !          3458: }
        !          3459: #endif\
        !          3460: "
        !          3461:        } # !$opt_dry_run
        !          3462: 
        !          3463:        pic_flag_for_symtable=
        !          3464:        case "$compile_command " in
        !          3465:        *" -static "*) ;;
        !          3466:        *)
        !          3467:          case $host in
        !          3468:          # compiling the symbol table file with pic_flag works around
        !          3469:          # a FreeBSD bug that causes programs to crash when -lm is
        !          3470:          # linked before any other PIC object.  But we must not use
        !          3471:          # pic_flag when linking with -static.  The problem exists in
        !          3472:          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
        !          3473:          *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
        !          3474:            pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
        !          3475:          *-*-hpux*)
        !          3476:            pic_flag_for_symtable=" $pic_flag"  ;;
        !          3477:          *)
        !          3478:            if test "X$my_pic_p" != Xno; then
        !          3479:              pic_flag_for_symtable=" $pic_flag"
        !          3480:            fi
        !          3481:            ;;
        !          3482:          esac
        !          3483:          ;;
        !          3484:        esac
        !          3485:        symtab_cflags=
        !          3486:        for arg in $LTCFLAGS; do
        !          3487:          case $arg in
        !          3488:          -pie | -fpie | -fPIE) ;;
        !          3489:          *) func_append symtab_cflags " $arg" ;;
        !          3490:          esac
        !          3491:        done
        !          3492: 
        !          3493:        # Now compile the dynamic symbol file.
        !          3494:        func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
        !          3495: 
        !          3496:        # Clean up the generated files.
        !          3497:        func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
        !          3498: 
        !          3499:        # Transform the symbol file into the correct name.
        !          3500:        symfileobj="$output_objdir/${my_outputname}S.$objext"
        !          3501:        case $host in
        !          3502:        *cygwin* | *mingw* | *cegcc* )
        !          3503:          if test -f "$output_objdir/$my_outputname.def"; then
        !          3504:            compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
        !          3505:            finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
        !          3506:          else
        !          3507:            compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
        !          3508:            finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
        !          3509:          fi
        !          3510:          ;;
        !          3511:        *)
        !          3512:          compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
        !          3513:          finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
        !          3514:          ;;
        !          3515:        esac
        !          3516:        ;;
        !          3517:       *)
        !          3518:        func_fatal_error "unknown suffix for \`$my_dlsyms'"
        !          3519:        ;;
        !          3520:       esac
        !          3521:     else
        !          3522:       # We keep going just in case the user didn't refer to
        !          3523:       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
        !          3524:       # really was required.
        !          3525: 
        !          3526:       # Nullify the symbol file.
        !          3527:       compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
        !          3528:       finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
        !          3529:     fi
        !          3530: }
        !          3531: 
        !          3532: # func_win32_libid arg
        !          3533: # return the library type of file 'arg'
        !          3534: #
        !          3535: # Need a lot of goo to handle *both* DLLs and import libs
        !          3536: # Has to be a shell function in order to 'eat' the argument
        !          3537: # that is supplied when $file_magic_command is called.
        !          3538: # Despite the name, also deal with 64 bit binaries.
        !          3539: func_win32_libid ()
        !          3540: {
        !          3541:   $opt_debug
        !          3542:   win32_libid_type="unknown"
        !          3543:   win32_fileres=`file -L $1 2>/dev/null`
        !          3544:   case $win32_fileres in
        !          3545:   *ar\ archive\ import\ library*) # definitely import
        !          3546:     win32_libid_type="x86 archive import"
        !          3547:     ;;
        !          3548:   *ar\ archive*) # could be an import, or static
        !          3549:     # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
        !          3550:     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
        !          3551:        $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
        !          3552:       func_to_tool_file "$1" func_convert_file_msys_to_w32
        !          3553:       win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
        !          3554:        $SED -n -e '
        !          3555:            1,100{
        !          3556:                / I /{
        !          3557:                    s,.*,import,
        !          3558:                    p
        !          3559:                    q
        !          3560:                }
        !          3561:            }'`
        !          3562:       case $win32_nmres in
        !          3563:       import*)  win32_libid_type="x86 archive import";;
        !          3564:       *)        win32_libid_type="x86 archive static";;
        !          3565:       esac
        !          3566:     fi
        !          3567:     ;;
        !          3568:   *DLL*)
        !          3569:     win32_libid_type="x86 DLL"
        !          3570:     ;;
        !          3571:   *executable*) # but shell scripts are "executable" too...
        !          3572:     case $win32_fileres in
        !          3573:     *MS\ Windows\ PE\ Intel*)
        !          3574:       win32_libid_type="x86 DLL"
        !          3575:       ;;
        !          3576:     esac
        !          3577:     ;;
        !          3578:   esac
        !          3579:   $ECHO "$win32_libid_type"
        !          3580: }
        !          3581: 
        !          3582: # func_cygming_dll_for_implib ARG
        !          3583: #
        !          3584: # Platform-specific function to extract the
        !          3585: # name of the DLL associated with the specified
        !          3586: # import library ARG.
        !          3587: # Invoked by eval'ing the libtool variable
        !          3588: #    $sharedlib_from_linklib_cmd
        !          3589: # Result is available in the variable
        !          3590: #    $sharedlib_from_linklib_result
        !          3591: func_cygming_dll_for_implib ()
        !          3592: {
        !          3593:   $opt_debug
        !          3594:   sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
        !          3595: }
        !          3596: 
        !          3597: # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
        !          3598: #
        !          3599: # The is the core of a fallback implementation of a
        !          3600: # platform-specific function to extract the name of the
        !          3601: # DLL associated with the specified import library LIBNAME.
        !          3602: #
        !          3603: # SECTION_NAME is either .idata$6 or .idata$7, depending
        !          3604: # on the platform and compiler that created the implib.
        !          3605: #
        !          3606: # Echos the name of the DLL associated with the
        !          3607: # specified import library.
        !          3608: func_cygming_dll_for_implib_fallback_core ()
        !          3609: {
        !          3610:   $opt_debug
        !          3611:   match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
        !          3612:   $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
        !          3613:     $SED '/^Contents of section '"$match_literal"':/{
        !          3614:       # Place marker at beginning of archive member dllname section
        !          3615:       s/.*/====MARK====/
        !          3616:       p
        !          3617:       d
        !          3618:     }
        !          3619:     # These lines can sometimes be longer than 43 characters, but
        !          3620:     # are always uninteresting
        !          3621:     /:[         ]*file format pe[i]\{,1\}-/d
        !          3622:     /^In archive [^:]*:/d
        !          3623:     # Ensure marker is printed
        !          3624:     /^====MARK====/p
        !          3625:     # Remove all lines with less than 43 characters
        !          3626:     /^.\{43\}/!d
        !          3627:     # From remaining lines, remove first 43 characters
        !          3628:     s/^.\{43\}//' |
        !          3629:     $SED -n '
        !          3630:       # Join marker and all lines until next marker into a single line
        !          3631:       /^====MARK====/ b para
        !          3632:       H
        !          3633:       $ b para
        !          3634:       b
        !          3635:       :para
        !          3636:       x
        !          3637:       s/\n//g
        !          3638:       # Remove the marker
        !          3639:       s/^====MARK====//
        !          3640:       # Remove trailing dots and whitespace
        !          3641:       s/[\. \t]*$//
        !          3642:       # Print
        !          3643:       /./p' |
        !          3644:     # we now have a list, one entry per line, of the stringified
        !          3645:     # contents of the appropriate section of all members of the
        !          3646:     # archive which possess that section. Heuristic: eliminate
        !          3647:     # all those which have a first or second character that is
        !          3648:     # a '.' (that is, objdump's representation of an unprintable
        !          3649:     # character.) This should work for all archives with less than
        !          3650:     # 0x302f exports -- but will fail for DLLs whose name actually
        !          3651:     # begins with a literal '.' or a single character followed by
        !          3652:     # a '.'.
        !          3653:     #
        !          3654:     # Of those that remain, print the first one.
        !          3655:     $SED -e '/^\./d;/^.\./d;q'
        !          3656: }
        !          3657: 
        !          3658: # func_cygming_gnu_implib_p ARG
        !          3659: # This predicate returns with zero status (TRUE) if
        !          3660: # ARG is a GNU/binutils-style import library. Returns
        !          3661: # with nonzero status (FALSE) otherwise.
        !          3662: func_cygming_gnu_implib_p ()
        !          3663: {
        !          3664:   $opt_debug
        !          3665:   func_to_tool_file "$1" func_convert_file_msys_to_w32
        !          3666:   func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
        !          3667:   test -n "$func_cygming_gnu_implib_tmp"
        !          3668: }
        !          3669: 
        !          3670: # func_cygming_ms_implib_p ARG
        !          3671: # This predicate returns with zero status (TRUE) if
        !          3672: # ARG is an MS-style import library. Returns
        !          3673: # with nonzero status (FALSE) otherwise.
        !          3674: func_cygming_ms_implib_p ()
        !          3675: {
        !          3676:   $opt_debug
        !          3677:   func_to_tool_file "$1" func_convert_file_msys_to_w32
        !          3678:   func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
        !          3679:   test -n "$func_cygming_ms_implib_tmp"
        !          3680: }
        !          3681: 
        !          3682: # func_cygming_dll_for_implib_fallback ARG
        !          3683: # Platform-specific function to extract the
        !          3684: # name of the DLL associated with the specified
        !          3685: # import library ARG.
        !          3686: #
        !          3687: # This fallback implementation is for use when $DLLTOOL
        !          3688: # does not support the --identify-strict option.
        !          3689: # Invoked by eval'ing the libtool variable
        !          3690: #    $sharedlib_from_linklib_cmd
        !          3691: # Result is available in the variable
        !          3692: #    $sharedlib_from_linklib_result
        !          3693: func_cygming_dll_for_implib_fallback ()
        !          3694: {
        !          3695:   $opt_debug
        !          3696:   if func_cygming_gnu_implib_p "$1" ; then
        !          3697:     # binutils import library
        !          3698:     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
        !          3699:   elif func_cygming_ms_implib_p "$1" ; then
        !          3700:     # ms-generated import library
        !          3701:     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
        !          3702:   else
        !          3703:     # unknown
        !          3704:     sharedlib_from_linklib_result=""
        !          3705:   fi
        !          3706: }
        !          3707: 
        !          3708: 
        !          3709: # func_extract_an_archive dir oldlib
        !          3710: func_extract_an_archive ()
        !          3711: {
        !          3712:     $opt_debug
        !          3713:     f_ex_an_ar_dir="$1"; shift
        !          3714:     f_ex_an_ar_oldlib="$1"
        !          3715:     if test "$lock_old_archive_extraction" = yes; then
        !          3716:       lockfile=$f_ex_an_ar_oldlib.lock
        !          3717:       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
        !          3718:        func_echo "Waiting for $lockfile to be removed"
        !          3719:        sleep 2
        !          3720:       done
        !          3721:     fi
        !          3722:     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
        !          3723:                   'stat=$?; rm -f "$lockfile"; exit $stat'
        !          3724:     if test "$lock_old_archive_extraction" = yes; then
        !          3725:       $opt_dry_run || rm -f "$lockfile"
        !          3726:     fi
        !          3727:     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
        !          3728:      :
        !          3729:     else
        !          3730:       func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
        !          3731:     fi
        !          3732: }
        !          3733: 
        !          3734: 
        !          3735: # func_extract_archives gentop oldlib ...
        !          3736: func_extract_archives ()
        !          3737: {
        !          3738:     $opt_debug
        !          3739:     my_gentop="$1"; shift
        !          3740:     my_oldlibs=${1+"$@"}
        !          3741:     my_oldobjs=""
        !          3742:     my_xlib=""
        !          3743:     my_xabs=""
        !          3744:     my_xdir=""
        !          3745: 
        !          3746:     for my_xlib in $my_oldlibs; do
        !          3747:       # Extract the objects.
        !          3748:       case $my_xlib in
        !          3749:        [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
        !          3750:        *) my_xabs=`pwd`"/$my_xlib" ;;
        !          3751:       esac
        !          3752:       func_basename "$my_xlib"
        !          3753:       my_xlib="$func_basename_result"
        !          3754:       my_xlib_u=$my_xlib
        !          3755:       while :; do
        !          3756:         case " $extracted_archives " in
        !          3757:        *" $my_xlib_u "*)
        !          3758:          func_arith $extracted_serial + 1
        !          3759:          extracted_serial=$func_arith_result
        !          3760:          my_xlib_u=lt$extracted_serial-$my_xlib ;;
        !          3761:        *) break ;;
        !          3762:        esac
        !          3763:       done
        !          3764:       extracted_archives="$extracted_archives $my_xlib_u"
        !          3765:       my_xdir="$my_gentop/$my_xlib_u"
        !          3766: 
        !          3767:       func_mkdir_p "$my_xdir"
        !          3768: 
        !          3769:       case $host in
        !          3770:       *-darwin*)
        !          3771:        func_verbose "Extracting $my_xabs"
        !          3772:        # Do not bother doing anything if just a dry run
        !          3773:        $opt_dry_run || {
        !          3774:          darwin_orig_dir=`pwd`
        !          3775:          cd $my_xdir || exit $?
        !          3776:          darwin_archive=$my_xabs
        !          3777:          darwin_curdir=`pwd`
        !          3778:          darwin_base_archive=`basename "$darwin_archive"`
        !          3779:          darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
        !          3780:          if test -n "$darwin_arches"; then
        !          3781:            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
        !          3782:            darwin_arch=
        !          3783:            func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
        !          3784:            for darwin_arch in  $darwin_arches ; do
        !          3785:              func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
        !          3786:              $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
        !          3787:              cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
        !          3788:              func_extract_an_archive "`pwd`" "${darwin_base_archive}"
        !          3789:              cd "$darwin_curdir"
        !          3790:              $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
        !          3791:            done # $darwin_arches
        !          3792:             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
        !          3793:            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
        !          3794:            darwin_file=
        !          3795:            darwin_files=
        !          3796:            for darwin_file in $darwin_filelist; do
        !          3797:              darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
        !          3798:              $LIPO -create -output "$darwin_file" $darwin_files
        !          3799:            done # $darwin_filelist
        !          3800:            $RM -rf unfat-$$
        !          3801:            cd "$darwin_orig_dir"
        !          3802:          else
        !          3803:            cd $darwin_orig_dir
        !          3804:            func_extract_an_archive "$my_xdir" "$my_xabs"
        !          3805:          fi # $darwin_arches
        !          3806:        } # !$opt_dry_run
        !          3807:        ;;
        !          3808:       *)
        !          3809:         func_extract_an_archive "$my_xdir" "$my_xabs"
        !          3810:        ;;
        !          3811:       esac
        !          3812:       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
        !          3813:     done
        !          3814: 
        !          3815:     func_extract_archives_result="$my_oldobjs"
        !          3816: }
        !          3817: 
        !          3818: 
        !          3819: # func_emit_wrapper [arg=no]
        !          3820: #
        !          3821: # Emit a libtool wrapper script on stdout.
        !          3822: # Don't directly open a file because we may want to
        !          3823: # incorporate the script contents within a cygwin/mingw
        !          3824: # wrapper executable.  Must ONLY be called from within
        !          3825: # func_mode_link because it depends on a number of variables
        !          3826: # set therein.
        !          3827: #
        !          3828: # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
        !          3829: # variable will take.  If 'yes', then the emitted script
        !          3830: # will assume that the directory in which it is stored is
        !          3831: # the $objdir directory.  This is a cygwin/mingw-specific
        !          3832: # behavior.
        !          3833: func_emit_wrapper ()
        !          3834: {
        !          3835:        func_emit_wrapper_arg1=${1-no}
        !          3836: 
        !          3837:        $ECHO "\
        !          3838: #! $SHELL
        !          3839: 
        !          3840: # $output - temporary wrapper script for $objdir/$outputname
        !          3841: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
        !          3842: #
        !          3843: # The $output program cannot be directly executed until all the libtool
        !          3844: # libraries that it depends on are installed.
        !          3845: #
        !          3846: # This wrapper script should never be moved out of the build directory.
        !          3847: # If it is, it will not operate correctly.
        !          3848: 
        !          3849: # Sed substitution that helps us do robust quoting.  It backslashifies
        !          3850: # metacharacters that are still active within double-quoted strings.
        !          3851: sed_quote_subst='$sed_quote_subst'
        !          3852: 
        !          3853: # Be Bourne compatible
        !          3854: if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
        !          3855:   emulate sh
        !          3856:   NULLCMD=:
        !          3857:   # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
        !          3858:   # is contrary to our usage.  Disable this feature.
        !          3859:   alias -g '\${1+\"\$@\"}'='\"\$@\"'
        !          3860:   setopt NO_GLOB_SUBST
        !          3861: else
        !          3862:   case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
        !          3863: fi
        !          3864: BIN_SH=xpg4; export BIN_SH # for Tru64
        !          3865: DUALCASE=1; export DUALCASE # for MKS sh
        !          3866: 
        !          3867: # The HP-UX ksh and POSIX shell print the target directory to stdout
        !          3868: # if CDPATH is set.
        !          3869: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
        !          3870: 
        !          3871: relink_command=\"$relink_command\"
        !          3872: 
        !          3873: # This environment variable determines our operation mode.
        !          3874: if test \"\$libtool_install_magic\" = \"$magic\"; then
        !          3875:   # install mode needs the following variables:
        !          3876:   generated_by_libtool_version='$macro_version'
        !          3877:   notinst_deplibs='$notinst_deplibs'
        !          3878: else
        !          3879:   # When we are sourced in execute mode, \$file and \$ECHO are already set.
        !          3880:   if test \"\$libtool_execute_magic\" != \"$magic\"; then
        !          3881:     file=\"\$0\""
        !          3882: 
        !          3883:     qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
        !          3884:     $ECHO "\
        !          3885: 
        !          3886: # A function that is used when there is no print builtin or printf.
        !          3887: func_fallback_echo ()
        !          3888: {
        !          3889:   eval 'cat <<_LTECHO_EOF
        !          3890: \$1
        !          3891: _LTECHO_EOF'
        !          3892: }
        !          3893:     ECHO=\"$qECHO\"
        !          3894:   fi
        !          3895: 
        !          3896: # Very basic option parsing. These options are (a) specific to
        !          3897: # the libtool wrapper, (b) are identical between the wrapper
        !          3898: # /script/ and the wrapper /executable/ which is used only on
        !          3899: # windows platforms, and (c) all begin with the string "--lt-"
        !          3900: # (application programs are unlikely to have options which match
        !          3901: # this pattern).
        !          3902: #
        !          3903: # There are only two supported options: --lt-debug and
        !          3904: # --lt-dump-script. There is, deliberately, no --lt-help.
        !          3905: #
        !          3906: # The first argument to this parsing function should be the
        !          3907: # script's $0 value, followed by "$@".
        !          3908: lt_option_debug=
        !          3909: func_parse_lt_options ()
        !          3910: {
        !          3911:   lt_script_arg0=\$0
        !          3912:   shift
        !          3913:   for lt_opt
        !          3914:   do
        !          3915:     case \"\$lt_opt\" in
        !          3916:     --lt-debug) lt_option_debug=1 ;;
        !          3917:     --lt-dump-script)
        !          3918:         lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
        !          3919:         test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
        !          3920:         lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
        !          3921:         cat \"\$lt_dump_D/\$lt_dump_F\"
        !          3922:         exit 0
        !          3923:       ;;
        !          3924:     --lt-*)
        !          3925:         \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
        !          3926:         exit 1
        !          3927:       ;;
        !          3928:     esac
        !          3929:   done
        !          3930: 
        !          3931:   # Print the debug banner immediately:
        !          3932:   if test -n \"\$lt_option_debug\"; then
        !          3933:     echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
        !          3934:   fi
        !          3935: }
        !          3936: 
        !          3937: # Used when --lt-debug. Prints its arguments to stdout
        !          3938: # (redirection is the responsibility of the caller)
        !          3939: func_lt_dump_args ()
        !          3940: {
        !          3941:   lt_dump_args_N=1;
        !          3942:   for lt_arg
        !          3943:   do
        !          3944:     \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
        !          3945:     lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
        !          3946:   done
        !          3947: }
        !          3948: 
        !          3949: # Core function for launching the target application
        !          3950: func_exec_program_core ()
        !          3951: {
        !          3952: "
        !          3953:   case $host in
        !          3954:   # Backslashes separate directories on plain windows
        !          3955:   *-*-mingw | *-*-os2* | *-cegcc*)
        !          3956:     $ECHO "\
        !          3957:       if test -n \"\$lt_option_debug\"; then
        !          3958:         \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
        !          3959:         func_lt_dump_args \${1+\"\$@\"} 1>&2
        !          3960:       fi
        !          3961:       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
        !          3962: "
        !          3963:     ;;
        !          3964: 
        !          3965:   *)
        !          3966:     $ECHO "\
        !          3967:       if test -n \"\$lt_option_debug\"; then
        !          3968:         \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
        !          3969:         func_lt_dump_args \${1+\"\$@\"} 1>&2
        !          3970:       fi
        !          3971:       exec \"\$progdir/\$program\" \${1+\"\$@\"}
        !          3972: "
        !          3973:     ;;
        !          3974:   esac
        !          3975:   $ECHO "\
        !          3976:       \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
        !          3977:       exit 1
        !          3978: }
        !          3979: 
        !          3980: # A function to encapsulate launching the target application
        !          3981: # Strips options in the --lt-* namespace from \$@ and
        !          3982: # launches target application with the remaining arguments.
        !          3983: func_exec_program ()
        !          3984: {
        !          3985:   for lt_wr_arg
        !          3986:   do
        !          3987:     case \$lt_wr_arg in
        !          3988:     --lt-*) ;;
        !          3989:     *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
        !          3990:     esac
        !          3991:     shift
        !          3992:   done
        !          3993:   func_exec_program_core \${1+\"\$@\"}
        !          3994: }
        !          3995: 
        !          3996:   # Parse options
        !          3997:   func_parse_lt_options \"\$0\" \${1+\"\$@\"}
        !          3998: 
        !          3999:   # Find the directory that this script lives in.
        !          4000:   thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
        !          4001:   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
        !          4002: 
        !          4003:   # Follow symbolic links until we get to the real thisdir.
        !          4004:   file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
        !          4005:   while test -n \"\$file\"; do
        !          4006:     destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
        !          4007: 
        !          4008:     # If there was a directory component, then change thisdir.
        !          4009:     if test \"x\$destdir\" != \"x\$file\"; then
        !          4010:       case \"\$destdir\" in
        !          4011:       [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
        !          4012:       *) thisdir=\"\$thisdir/\$destdir\" ;;
        !          4013:       esac
        !          4014:     fi
        !          4015: 
        !          4016:     file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
        !          4017:     file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
        !          4018:   done
        !          4019: 
        !          4020:   # Usually 'no', except on cygwin/mingw when embedded into
        !          4021:   # the cwrapper.
        !          4022:   WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
        !          4023:   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
        !          4024:     # special case for '.'
        !          4025:     if test \"\$thisdir\" = \".\"; then
        !          4026:       thisdir=\`pwd\`
        !          4027:     fi
        !          4028:     # remove .libs from thisdir
        !          4029:     case \"\$thisdir\" in
        !          4030:     *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
        !          4031:     $objdir )   thisdir=. ;;
        !          4032:     esac
        !          4033:   fi
        !          4034: 
        !          4035:   # Try to get the absolute directory name.
        !          4036:   absdir=\`cd \"\$thisdir\" && pwd\`
        !          4037:   test -n \"\$absdir\" && thisdir=\"\$absdir\"
        !          4038: "
        !          4039: 
        !          4040:        if test "$fast_install" = yes; then
        !          4041:          $ECHO "\
        !          4042:   program=lt-'$outputname'$exeext
        !          4043:   progdir=\"\$thisdir/$objdir\"
        !          4044: 
        !          4045:   if test ! -f \"\$progdir/\$program\" ||
        !          4046:      { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
        !          4047:        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
        !          4048: 
        !          4049:     file=\"\$\$-\$program\"
        !          4050: 
        !          4051:     if test ! -d \"\$progdir\"; then
        !          4052:       $MKDIR \"\$progdir\"
        !          4053:     else
        !          4054:       $RM \"\$progdir/\$file\"
        !          4055:     fi"
        !          4056: 
        !          4057:          $ECHO "\
        !          4058: 
        !          4059:     # relink executable if necessary
        !          4060:     if test -n \"\$relink_command\"; then
        !          4061:       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
        !          4062:       else
        !          4063:        $ECHO \"\$relink_command_output\" >&2
        !          4064:        $RM \"\$progdir/\$file\"
        !          4065:        exit 1
        !          4066:       fi
        !          4067:     fi
        !          4068: 
        !          4069:     $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
        !          4070:     { $RM \"\$progdir/\$program\";
        !          4071:       $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
        !          4072:     $RM \"\$progdir/\$file\"
        !          4073:   fi"
        !          4074:        else
        !          4075:          $ECHO "\
        !          4076:   program='$outputname'
        !          4077:   progdir=\"\$thisdir/$objdir\"
        !          4078: "
        !          4079:        fi
        !          4080: 
        !          4081:        $ECHO "\
        !          4082: 
        !          4083:   if test -f \"\$progdir/\$program\"; then"
        !          4084: 
        !          4085:        # fixup the dll searchpath if we need to.
        !          4086:        #
        !          4087:        # Fix the DLL searchpath if we need to.  Do this before prepending
        !          4088:        # to shlibpath, because on Windows, both are PATH and uninstalled
        !          4089:        # libraries must come first.
        !          4090:        if test -n "$dllsearchpath"; then
        !          4091:          $ECHO "\
        !          4092:     # Add the dll search path components to the executable PATH
        !          4093:     PATH=$dllsearchpath:\$PATH
        !          4094: "
        !          4095:        fi
        !          4096: 
        !          4097:        # Export our shlibpath_var if we have one.
        !          4098:        if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
        !          4099:          $ECHO "\
        !          4100:     # Add our own library path to $shlibpath_var
        !          4101:     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
        !          4102: 
        !          4103:     # Some systems cannot cope with colon-terminated $shlibpath_var
        !          4104:     # The second colon is a workaround for a bug in BeOS R4 sed
        !          4105:     $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
        !          4106: 
        !          4107:     export $shlibpath_var
        !          4108: "
        !          4109:        fi
        !          4110: 
        !          4111:        $ECHO "\
        !          4112:     if test \"\$libtool_execute_magic\" != \"$magic\"; then
        !          4113:       # Run the actual program with our arguments.
        !          4114:       func_exec_program \${1+\"\$@\"}
        !          4115:     fi
        !          4116:   else
        !          4117:     # The program doesn't exist.
        !          4118:     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
        !          4119:     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
        !          4120:     \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
        !          4121:     exit 1
        !          4122:   fi
        !          4123: fi\
        !          4124: "
        !          4125: }
        !          4126: 
        !          4127: 
        !          4128: # func_emit_cwrapperexe_src
        !          4129: # emit the source code for a wrapper executable on stdout
        !          4130: # Must ONLY be called from within func_mode_link because
        !          4131: # it depends on a number of variable set therein.
        !          4132: func_emit_cwrapperexe_src ()
        !          4133: {
        !          4134:        cat <<EOF
        !          4135: 
        !          4136: /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
        !          4137:    Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
        !          4138: 
        !          4139:    The $output program cannot be directly executed until all the libtool
        !          4140:    libraries that it depends on are installed.
        !          4141: 
        !          4142:    This wrapper executable should never be moved out of the build directory.
        !          4143:    If it is, it will not operate correctly.
        !          4144: */
        !          4145: EOF
        !          4146:            cat <<"EOF"
        !          4147: #ifdef _MSC_VER
        !          4148: # define _CRT_SECURE_NO_DEPRECATE 1
        !          4149: #endif
        !          4150: #include <stdio.h>
        !          4151: #include <stdlib.h>
        !          4152: #ifdef _MSC_VER
        !          4153: # include <direct.h>
        !          4154: # include <process.h>
        !          4155: # include <io.h>
        !          4156: #else
        !          4157: # include <unistd.h>
        !          4158: # include <stdint.h>
        !          4159: # ifdef __CYGWIN__
        !          4160: #  include <io.h>
        !          4161: # endif
        !          4162: #endif
        !          4163: #include <malloc.h>
        !          4164: #include <stdarg.h>
        !          4165: #include <assert.h>
        !          4166: #include <string.h>
        !          4167: #include <ctype.h>
        !          4168: #include <errno.h>
        !          4169: #include <fcntl.h>
        !          4170: #include <sys/stat.h>
        !          4171: 
        !          4172: /* declarations of non-ANSI functions */
        !          4173: #if defined(__MINGW32__)
        !          4174: # ifdef __STRICT_ANSI__
        !          4175: int _putenv (const char *);
        !          4176: # endif
        !          4177: #elif defined(__CYGWIN__)
        !          4178: # ifdef __STRICT_ANSI__
        !          4179: char *realpath (const char *, char *);
        !          4180: int putenv (char *);
        !          4181: int setenv (const char *, const char *, int);
        !          4182: # endif
        !          4183: /* #elif defined (other platforms) ... */
        !          4184: #endif
        !          4185: 
        !          4186: /* portability defines, excluding path handling macros */
        !          4187: #if defined(_MSC_VER)
        !          4188: # define setmode _setmode
        !          4189: # define stat    _stat
        !          4190: # define chmod   _chmod
        !          4191: # define getcwd  _getcwd
        !          4192: # define putenv  _putenv
        !          4193: # define S_IXUSR _S_IEXEC
        !          4194: # ifndef _INTPTR_T_DEFINED
        !          4195: #  define _INTPTR_T_DEFINED
        !          4196: #  define intptr_t int
        !          4197: # endif
        !          4198: #elif defined(__MINGW32__)
        !          4199: # define setmode _setmode
        !          4200: # define stat    _stat
        !          4201: # define chmod   _chmod
        !          4202: # define getcwd  _getcwd
        !          4203: # define putenv  _putenv
        !          4204: #elif defined(__CYGWIN__)
        !          4205: # define HAVE_SETENV
        !          4206: # define FOPEN_WB "wb"
        !          4207: /* #elif defined (other platforms) ... */
        !          4208: #endif
        !          4209: 
        !          4210: #if defined(PATH_MAX)
        !          4211: # define LT_PATHMAX PATH_MAX
        !          4212: #elif defined(MAXPATHLEN)
        !          4213: # define LT_PATHMAX MAXPATHLEN
        !          4214: #else
        !          4215: # define LT_PATHMAX 1024
        !          4216: #endif
        !          4217: 
        !          4218: #ifndef S_IXOTH
        !          4219: # define S_IXOTH 0
        !          4220: #endif
        !          4221: #ifndef S_IXGRP
        !          4222: # define S_IXGRP 0
        !          4223: #endif
        !          4224: 
        !          4225: /* path handling portability macros */
        !          4226: #ifndef DIR_SEPARATOR
        !          4227: # define DIR_SEPARATOR '/'
        !          4228: # define PATH_SEPARATOR ':'
        !          4229: #endif
        !          4230: 
        !          4231: #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
        !          4232:   defined (__OS2__)
        !          4233: # define HAVE_DOS_BASED_FILE_SYSTEM
        !          4234: # define FOPEN_WB "wb"
        !          4235: # ifndef DIR_SEPARATOR_2
        !          4236: #  define DIR_SEPARATOR_2 '\\'
        !          4237: # endif
        !          4238: # ifndef PATH_SEPARATOR_2
        !          4239: #  define PATH_SEPARATOR_2 ';'
        !          4240: # endif
        !          4241: #endif
        !          4242: 
        !          4243: #ifndef DIR_SEPARATOR_2
        !          4244: # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
        !          4245: #else /* DIR_SEPARATOR_2 */
        !          4246: # define IS_DIR_SEPARATOR(ch) \
        !          4247:        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
        !          4248: #endif /* DIR_SEPARATOR_2 */
        !          4249: 
        !          4250: #ifndef PATH_SEPARATOR_2
        !          4251: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
        !          4252: #else /* PATH_SEPARATOR_2 */
        !          4253: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
        !          4254: #endif /* PATH_SEPARATOR_2 */
        !          4255: 
        !          4256: #ifndef FOPEN_WB
        !          4257: # define FOPEN_WB "w"
        !          4258: #endif
        !          4259: #ifndef _O_BINARY
        !          4260: # define _O_BINARY 0
        !          4261: #endif
        !          4262: 
        !          4263: #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
        !          4264: #define XFREE(stale) do { \
        !          4265:   if (stale) { free ((void *) stale); stale = 0; } \
        !          4266: } while (0)
        !          4267: 
        !          4268: #if defined(LT_DEBUGWRAPPER)
        !          4269: static int lt_debug = 1;
        !          4270: #else
        !          4271: static int lt_debug = 0;
        !          4272: #endif
        !          4273: 
        !          4274: const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
        !          4275: 
        !          4276: void *xmalloc (size_t num);
        !          4277: char *xstrdup (const char *string);
        !          4278: const char *base_name (const char *name);
        !          4279: char *find_executable (const char *wrapper);
        !          4280: char *chase_symlinks (const char *pathspec);
        !          4281: int make_executable (const char *path);
        !          4282: int check_executable (const char *path);
        !          4283: char *strendzap (char *str, const char *pat);
        !          4284: void lt_debugprintf (const char *file, int line, const char *fmt, ...);
        !          4285: void lt_fatal (const char *file, int line, const char *message, ...);
        !          4286: static const char *nonnull (const char *s);
        !          4287: static const char *nonempty (const char *s);
        !          4288: void lt_setenv (const char *name, const char *value);
        !          4289: char *lt_extend_str (const char *orig_value, const char *add, int to_end);
        !          4290: void lt_update_exe_path (const char *name, const char *value);
        !          4291: void lt_update_lib_path (const char *name, const char *value);
        !          4292: char **prepare_spawn (char **argv);
        !          4293: void lt_dump_script (FILE *f);
        !          4294: EOF
        !          4295: 
        !          4296:            cat <<EOF
        !          4297: volatile const char * MAGIC_EXE = "$magic_exe";
        !          4298: const char * LIB_PATH_VARNAME = "$shlibpath_var";
        !          4299: EOF
        !          4300: 
        !          4301:            if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
        !          4302:               func_to_host_path "$temp_rpath"
        !          4303:              cat <<EOF
        !          4304: const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
        !          4305: EOF
        !          4306:            else
        !          4307:              cat <<"EOF"
        !          4308: const char * LIB_PATH_VALUE   = "";
        !          4309: EOF
1.1       misho    4310:            fi
                   4311: 
1.1.1.2 ! misho    4312:            if test -n "$dllsearchpath"; then
        !          4313:               func_to_host_path "$dllsearchpath:"
        !          4314:              cat <<EOF
        !          4315: const char * EXE_PATH_VARNAME = "PATH";
        !          4316: const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
        !          4317: EOF
1.1       misho    4318:            else
1.1.1.2 ! misho    4319:              cat <<"EOF"
        !          4320: const char * EXE_PATH_VARNAME = "";
        !          4321: const char * EXE_PATH_VALUE   = "";
        !          4322: EOF
1.1       misho    4323:            fi
                   4324: 
1.1.1.2 ! misho    4325:            if test "$fast_install" = yes; then
        !          4326:              cat <<EOF
        !          4327: const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
        !          4328: EOF
        !          4329:            else
        !          4330:              cat <<EOF
        !          4331: const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
        !          4332: EOF
1.1       misho    4333:            fi
                   4334: 
1.1.1.2 ! misho    4335: 
        !          4336:            cat <<"EOF"
        !          4337: 
        !          4338: #define LTWRAPPER_OPTION_PREFIX         "--lt-"
        !          4339: 
        !          4340: static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
        !          4341: static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
        !          4342: static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
        !          4343: 
        !          4344: int
        !          4345: main (int argc, char *argv[])
        !          4346: {
        !          4347:   char **newargz;
        !          4348:   int  newargc;
        !          4349:   char *tmp_pathspec;
        !          4350:   char *actual_cwrapper_path;
        !          4351:   char *actual_cwrapper_name;
        !          4352:   char *target_name;
        !          4353:   char *lt_argv_zero;
        !          4354:   intptr_t rval = 127;
        !          4355: 
        !          4356:   int i;
        !          4357: 
        !          4358:   program_name = (char *) xstrdup (base_name (argv[0]));
        !          4359:   newargz = XMALLOC (char *, argc + 1);
        !          4360: 
        !          4361:   /* very simple arg parsing; don't want to rely on getopt
        !          4362:    * also, copy all non cwrapper options to newargz, except
        !          4363:    * argz[0], which is handled differently
        !          4364:    */
        !          4365:   newargc=0;
        !          4366:   for (i = 1; i < argc; i++)
        !          4367:     {
        !          4368:       if (strcmp (argv[i], dumpscript_opt) == 0)
        !          4369:        {
        !          4370: EOF
        !          4371:            case "$host" in
        !          4372:              *mingw* | *cygwin* )
        !          4373:                # make stdout use "unix" line endings
        !          4374:                echo "          setmode(1,_O_BINARY);"
        !          4375:                ;;
1.1       misho    4376:              esac
                   4377: 
1.1.1.2 ! misho    4378:            cat <<"EOF"
        !          4379:          lt_dump_script (stdout);
        !          4380:          return 0;
        !          4381:        }
        !          4382:       if (strcmp (argv[i], debug_opt) == 0)
        !          4383:        {
        !          4384:           lt_debug = 1;
        !          4385:           continue;
        !          4386:        }
        !          4387:       if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
        !          4388:         {
        !          4389:           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
        !          4390:              namespace, but it is not one of the ones we know about and
        !          4391:              have already dealt with, above (inluding dump-script), then
        !          4392:              report an error. Otherwise, targets might begin to believe
        !          4393:              they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
        !          4394:              namespace. The first time any user complains about this, we'll
        !          4395:              need to make LTWRAPPER_OPTION_PREFIX a configure-time option
        !          4396:              or a configure.ac-settable value.
        !          4397:            */
        !          4398:           lt_fatal (__FILE__, __LINE__,
        !          4399:                    "unrecognized %s option: '%s'",
        !          4400:                     ltwrapper_option_prefix, argv[i]);
        !          4401:         }
        !          4402:       /* otherwise ... */
        !          4403:       newargz[++newargc] = xstrdup (argv[i]);
        !          4404:     }
        !          4405:   newargz[++newargc] = NULL;
        !          4406: 
        !          4407: EOF
        !          4408:            cat <<EOF
        !          4409:   /* The GNU banner must be the first non-error debug message */
        !          4410:   lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
        !          4411: EOF
        !          4412:            cat <<"EOF"
        !          4413:   lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
        !          4414:   lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
        !          4415: 
        !          4416:   tmp_pathspec = find_executable (argv[0]);
        !          4417:   if (tmp_pathspec == NULL)
        !          4418:     lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
        !          4419:   lt_debugprintf (__FILE__, __LINE__,
        !          4420:                   "(main) found exe (before symlink chase) at: %s\n",
        !          4421:                  tmp_pathspec);
        !          4422: 
        !          4423:   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
        !          4424:   lt_debugprintf (__FILE__, __LINE__,
        !          4425:                   "(main) found exe (after symlink chase) at: %s\n",
        !          4426:                  actual_cwrapper_path);
        !          4427:   XFREE (tmp_pathspec);
        !          4428: 
        !          4429:   actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
        !          4430:   strendzap (actual_cwrapper_path, actual_cwrapper_name);
        !          4431: 
        !          4432:   /* wrapper name transforms */
        !          4433:   strendzap (actual_cwrapper_name, ".exe");
        !          4434:   tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
        !          4435:   XFREE (actual_cwrapper_name);
        !          4436:   actual_cwrapper_name = tmp_pathspec;
        !          4437:   tmp_pathspec = 0;
        !          4438: 
        !          4439:   /* target_name transforms -- use actual target program name; might have lt- prefix */
        !          4440:   target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
        !          4441:   strendzap (target_name, ".exe");
        !          4442:   tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
        !          4443:   XFREE (target_name);
        !          4444:   target_name = tmp_pathspec;
        !          4445:   tmp_pathspec = 0;
        !          4446: 
        !          4447:   lt_debugprintf (__FILE__, __LINE__,
        !          4448:                  "(main) libtool target name: %s\n",
        !          4449:                  target_name);
        !          4450: EOF
        !          4451: 
        !          4452:            cat <<EOF
        !          4453:   newargz[0] =
        !          4454:     XMALLOC (char, (strlen (actual_cwrapper_path) +
        !          4455:                    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
        !          4456:   strcpy (newargz[0], actual_cwrapper_path);
        !          4457:   strcat (newargz[0], "$objdir");
        !          4458:   strcat (newargz[0], "/");
        !          4459: EOF
        !          4460: 
        !          4461:            cat <<"EOF"
        !          4462:   /* stop here, and copy so we don't have to do this twice */
        !          4463:   tmp_pathspec = xstrdup (newargz[0]);
        !          4464: 
        !          4465:   /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
        !          4466:   strcat (newargz[0], actual_cwrapper_name);
        !          4467: 
        !          4468:   /* DO want the lt- prefix here if it exists, so use target_name */
        !          4469:   lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
        !          4470:   XFREE (tmp_pathspec);
        !          4471:   tmp_pathspec = NULL;
        !          4472: EOF
        !          4473: 
        !          4474:            case $host_os in
        !          4475:              mingw*)
        !          4476:            cat <<"EOF"
        !          4477:   {
        !          4478:     char* p;
        !          4479:     while ((p = strchr (newargz[0], '\\')) != NULL)
        !          4480:       {
        !          4481:        *p = '/';
        !          4482:       }
        !          4483:     while ((p = strchr (lt_argv_zero, '\\')) != NULL)
        !          4484:       {
        !          4485:        *p = '/';
        !          4486:       }
        !          4487:   }
        !          4488: EOF
        !          4489:            ;;
        !          4490:            esac
        !          4491: 
        !          4492:            cat <<"EOF"
        !          4493:   XFREE (target_name);
        !          4494:   XFREE (actual_cwrapper_path);
        !          4495:   XFREE (actual_cwrapper_name);
        !          4496: 
        !          4497:   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
        !          4498:   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
        !          4499:   /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
        !          4500:      be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
        !          4501:      because on Windows, both *_VARNAMEs are PATH but uninstalled
        !          4502:      libraries must come first. */
        !          4503:   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
        !          4504:   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
        !          4505: 
        !          4506:   lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
        !          4507:                  nonnull (lt_argv_zero));
        !          4508:   for (i = 0; i < newargc; i++)
        !          4509:     {
        !          4510:       lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
        !          4511:                      i, nonnull (newargz[i]));
        !          4512:     }
        !          4513: 
        !          4514: EOF
        !          4515: 
        !          4516:            case $host_os in
        !          4517:              mingw*)
        !          4518:                cat <<"EOF"
        !          4519:   /* execv doesn't actually work on mingw as expected on unix */
        !          4520:   newargz = prepare_spawn (newargz);
        !          4521:   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
        !          4522:   if (rval == -1)
        !          4523:     {
        !          4524:       /* failed to start process */
        !          4525:       lt_debugprintf (__FILE__, __LINE__,
        !          4526:                      "(main) failed to launch target \"%s\": %s\n",
        !          4527:                      lt_argv_zero, nonnull (strerror (errno)));
        !          4528:       return 127;
        !          4529:     }
        !          4530:   return rval;
        !          4531: EOF
        !          4532:                ;;
        !          4533:              *)
        !          4534:                cat <<"EOF"
        !          4535:   execv (lt_argv_zero, newargz);
        !          4536:   return rval; /* =127, but avoids unused variable warning */
        !          4537: EOF
        !          4538:                ;;
        !          4539:            esac
        !          4540: 
        !          4541:            cat <<"EOF"
        !          4542: }
        !          4543: 
        !          4544: void *
        !          4545: xmalloc (size_t num)
        !          4546: {
        !          4547:   void *p = (void *) malloc (num);
        !          4548:   if (!p)
        !          4549:     lt_fatal (__FILE__, __LINE__, "memory exhausted");
        !          4550: 
        !          4551:   return p;
        !          4552: }
        !          4553: 
        !          4554: char *
        !          4555: xstrdup (const char *string)
        !          4556: {
        !          4557:   return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
        !          4558:                          string) : NULL;
        !          4559: }
        !          4560: 
        !          4561: const char *
        !          4562: base_name (const char *name)
        !          4563: {
        !          4564:   const char *base;
        !          4565: 
        !          4566: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
        !          4567:   /* Skip over the disk name in MSDOS pathnames. */
        !          4568:   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
        !          4569:     name += 2;
        !          4570: #endif
        !          4571: 
        !          4572:   for (base = name; *name; name++)
        !          4573:     if (IS_DIR_SEPARATOR (*name))
        !          4574:       base = name + 1;
        !          4575:   return base;
        !          4576: }
        !          4577: 
        !          4578: int
        !          4579: check_executable (const char *path)
        !          4580: {
        !          4581:   struct stat st;
        !          4582: 
        !          4583:   lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
        !          4584:                   nonempty (path));
        !          4585:   if ((!path) || (!*path))
        !          4586:     return 0;
        !          4587: 
        !          4588:   if ((stat (path, &st) >= 0)
        !          4589:       && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
        !          4590:     return 1;
        !          4591:   else
        !          4592:     return 0;
        !          4593: }
        !          4594: 
        !          4595: int
        !          4596: make_executable (const char *path)
        !          4597: {
        !          4598:   int rval = 0;
        !          4599:   struct stat st;
        !          4600: 
        !          4601:   lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
        !          4602:                   nonempty (path));
        !          4603:   if ((!path) || (!*path))
        !          4604:     return 0;
        !          4605: 
        !          4606:   if (stat (path, &st) >= 0)
        !          4607:     {
        !          4608:       rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
        !          4609:     }
        !          4610:   return rval;
        !          4611: }
        !          4612: 
        !          4613: /* Searches for the full path of the wrapper.  Returns
        !          4614:    newly allocated full path name if found, NULL otherwise
        !          4615:    Does not chase symlinks, even on platforms that support them.
        !          4616: */
        !          4617: char *
        !          4618: find_executable (const char *wrapper)
        !          4619: {
        !          4620:   int has_slash = 0;
        !          4621:   const char *p;
        !          4622:   const char *p_next;
        !          4623:   /* static buffer for getcwd */
        !          4624:   char tmp[LT_PATHMAX + 1];
        !          4625:   int tmp_len;
        !          4626:   char *concat_name;
        !          4627: 
        !          4628:   lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
        !          4629:                   nonempty (wrapper));
        !          4630: 
        !          4631:   if ((wrapper == NULL) || (*wrapper == '\0'))
        !          4632:     return NULL;
        !          4633: 
        !          4634:   /* Absolute path? */
        !          4635: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
        !          4636:   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
        !          4637:     {
        !          4638:       concat_name = xstrdup (wrapper);
        !          4639:       if (check_executable (concat_name))
        !          4640:        return concat_name;
        !          4641:       XFREE (concat_name);
        !          4642:     }
        !          4643:   else
        !          4644:     {
        !          4645: #endif
        !          4646:       if (IS_DIR_SEPARATOR (wrapper[0]))
        !          4647:        {
        !          4648:          concat_name = xstrdup (wrapper);
        !          4649:          if (check_executable (concat_name))
        !          4650:            return concat_name;
        !          4651:          XFREE (concat_name);
        !          4652:        }
        !          4653: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
        !          4654:     }
        !          4655: #endif
        !          4656: 
        !          4657:   for (p = wrapper; *p; p++)
        !          4658:     if (*p == '/')
        !          4659:       {
        !          4660:        has_slash = 1;
        !          4661:        break;
        !          4662:       }
        !          4663:   if (!has_slash)
        !          4664:     {
        !          4665:       /* no slashes; search PATH */
        !          4666:       const char *path = getenv ("PATH");
        !          4667:       if (path != NULL)
        !          4668:        {
        !          4669:          for (p = path; *p; p = p_next)
        !          4670:            {
        !          4671:              const char *q;
        !          4672:              size_t p_len;
        !          4673:              for (q = p; *q; q++)
        !          4674:                if (IS_PATH_SEPARATOR (*q))
        !          4675:                  break;
        !          4676:              p_len = q - p;
        !          4677:              p_next = (*q == '\0' ? q : q + 1);
        !          4678:              if (p_len == 0)
        !          4679:                {
        !          4680:                  /* empty path: current directory */
        !          4681:                  if (getcwd (tmp, LT_PATHMAX) == NULL)
        !          4682:                    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
        !          4683:                               nonnull (strerror (errno)));
        !          4684:                  tmp_len = strlen (tmp);
        !          4685:                  concat_name =
        !          4686:                    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
        !          4687:                  memcpy (concat_name, tmp, tmp_len);
        !          4688:                  concat_name[tmp_len] = '/';
        !          4689:                  strcpy (concat_name + tmp_len + 1, wrapper);
        !          4690:                }
        !          4691:              else
        !          4692:                {
        !          4693:                  concat_name =
        !          4694:                    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
        !          4695:                  memcpy (concat_name, p, p_len);
        !          4696:                  concat_name[p_len] = '/';
        !          4697:                  strcpy (concat_name + p_len + 1, wrapper);
        !          4698:                }
        !          4699:              if (check_executable (concat_name))
        !          4700:                return concat_name;
        !          4701:              XFREE (concat_name);
        !          4702:            }
        !          4703:        }
        !          4704:       /* not found in PATH; assume curdir */
        !          4705:     }
        !          4706:   /* Relative path | not found in path: prepend cwd */
        !          4707:   if (getcwd (tmp, LT_PATHMAX) == NULL)
        !          4708:     lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
        !          4709:               nonnull (strerror (errno)));
        !          4710:   tmp_len = strlen (tmp);
        !          4711:   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
        !          4712:   memcpy (concat_name, tmp, tmp_len);
        !          4713:   concat_name[tmp_len] = '/';
        !          4714:   strcpy (concat_name + tmp_len + 1, wrapper);
        !          4715: 
        !          4716:   if (check_executable (concat_name))
        !          4717:     return concat_name;
        !          4718:   XFREE (concat_name);
        !          4719:   return NULL;
        !          4720: }
        !          4721: 
        !          4722: char *
        !          4723: chase_symlinks (const char *pathspec)
        !          4724: {
        !          4725: #ifndef S_ISLNK
        !          4726:   return xstrdup (pathspec);
        !          4727: #else
        !          4728:   char buf[LT_PATHMAX];
        !          4729:   struct stat s;
        !          4730:   char *tmp_pathspec = xstrdup (pathspec);
        !          4731:   char *p;
        !          4732:   int has_symlinks = 0;
        !          4733:   while (strlen (tmp_pathspec) && !has_symlinks)
        !          4734:     {
        !          4735:       lt_debugprintf (__FILE__, __LINE__,
        !          4736:                      "checking path component for symlinks: %s\n",
        !          4737:                      tmp_pathspec);
        !          4738:       if (lstat (tmp_pathspec, &s) == 0)
        !          4739:        {
        !          4740:          if (S_ISLNK (s.st_mode) != 0)
        !          4741:            {
        !          4742:              has_symlinks = 1;
        !          4743:              break;
        !          4744:            }
        !          4745: 
        !          4746:          /* search backwards for last DIR_SEPARATOR */
        !          4747:          p = tmp_pathspec + strlen (tmp_pathspec) - 1;
        !          4748:          while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
        !          4749:            p--;
        !          4750:          if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
        !          4751:            {
        !          4752:              /* no more DIR_SEPARATORS left */
        !          4753:              break;
        !          4754:            }
        !          4755:          *p = '\0';
        !          4756:        }
        !          4757:       else
        !          4758:        {
        !          4759:          lt_fatal (__FILE__, __LINE__,
        !          4760:                    "error accessing file \"%s\": %s",
        !          4761:                    tmp_pathspec, nonnull (strerror (errno)));
        !          4762:        }
        !          4763:     }
        !          4764:   XFREE (tmp_pathspec);
        !          4765: 
        !          4766:   if (!has_symlinks)
        !          4767:     {
        !          4768:       return xstrdup (pathspec);
        !          4769:     }
        !          4770: 
        !          4771:   tmp_pathspec = realpath (pathspec, buf);
        !          4772:   if (tmp_pathspec == 0)
        !          4773:     {
        !          4774:       lt_fatal (__FILE__, __LINE__,
        !          4775:                "could not follow symlinks for %s", pathspec);
        !          4776:     }
        !          4777:   return xstrdup (tmp_pathspec);
        !          4778: #endif
        !          4779: }
        !          4780: 
        !          4781: char *
        !          4782: strendzap (char *str, const char *pat)
        !          4783: {
        !          4784:   size_t len, patlen;
        !          4785: 
        !          4786:   assert (str != NULL);
        !          4787:   assert (pat != NULL);
        !          4788: 
        !          4789:   len = strlen (str);
        !          4790:   patlen = strlen (pat);
        !          4791: 
        !          4792:   if (patlen <= len)
        !          4793:     {
        !          4794:       str += len - patlen;
        !          4795:       if (strcmp (str, pat) == 0)
        !          4796:        *str = '\0';
        !          4797:     }
        !          4798:   return str;
        !          4799: }
        !          4800: 
        !          4801: void
        !          4802: lt_debugprintf (const char *file, int line, const char *fmt, ...)
        !          4803: {
        !          4804:   va_list args;
        !          4805:   if (lt_debug)
        !          4806:     {
        !          4807:       (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
        !          4808:       va_start (args, fmt);
        !          4809:       (void) vfprintf (stderr, fmt, args);
        !          4810:       va_end (args);
        !          4811:     }
        !          4812: }
        !          4813: 
        !          4814: static void
        !          4815: lt_error_core (int exit_status, const char *file,
        !          4816:               int line, const char *mode,
        !          4817:               const char *message, va_list ap)
        !          4818: {
        !          4819:   fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
        !          4820:   vfprintf (stderr, message, ap);
        !          4821:   fprintf (stderr, ".\n");
        !          4822: 
        !          4823:   if (exit_status >= 0)
        !          4824:     exit (exit_status);
        !          4825: }
1.1       misho    4826: 
1.1.1.2 ! misho    4827: void
        !          4828: lt_fatal (const char *file, int line, const char *message, ...)
        !          4829: {
        !          4830:   va_list ap;
        !          4831:   va_start (ap, message);
        !          4832:   lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
        !          4833:   va_end (ap);
        !          4834: }
1.1       misho    4835: 
1.1.1.2 ! misho    4836: static const char *
        !          4837: nonnull (const char *s)
        !          4838: {
        !          4839:   return s ? s : "(null)";
        !          4840: }
1.1       misho    4841: 
1.1.1.2 ! misho    4842: static const char *
        !          4843: nonempty (const char *s)
        !          4844: {
        !          4845:   return (s && !*s) ? "(empty)" : nonnull (s);
        !          4846: }
1.1       misho    4847: 
1.1.1.2 ! misho    4848: void
        !          4849: lt_setenv (const char *name, const char *value)
        !          4850: {
        !          4851:   lt_debugprintf (__FILE__, __LINE__,
        !          4852:                  "(lt_setenv) setting '%s' to '%s'\n",
        !          4853:                   nonnull (name), nonnull (value));
        !          4854:   {
        !          4855: #ifdef HAVE_SETENV
        !          4856:     /* always make a copy, for consistency with !HAVE_SETENV */
        !          4857:     char *str = xstrdup (value);
        !          4858:     setenv (name, str, 1);
        !          4859: #else
        !          4860:     int len = strlen (name) + 1 + strlen (value) + 1;
        !          4861:     char *str = XMALLOC (char, len);
        !          4862:     sprintf (str, "%s=%s", name, value);
        !          4863:     if (putenv (str) != EXIT_SUCCESS)
        !          4864:       {
        !          4865:         XFREE (str);
        !          4866:       }
        !          4867: #endif
        !          4868:   }
        !          4869: }
1.1       misho    4870: 
1.1.1.2 ! misho    4871: char *
        !          4872: lt_extend_str (const char *orig_value, const char *add, int to_end)
        !          4873: {
        !          4874:   char *new_value;
        !          4875:   if (orig_value && *orig_value)
        !          4876:     {
        !          4877:       int orig_value_len = strlen (orig_value);
        !          4878:       int add_len = strlen (add);
        !          4879:       new_value = XMALLOC (char, add_len + orig_value_len + 1);
        !          4880:       if (to_end)
        !          4881:         {
        !          4882:           strcpy (new_value, orig_value);
        !          4883:           strcpy (new_value + orig_value_len, add);
        !          4884:         }
        !          4885:       else
        !          4886:         {
        !          4887:           strcpy (new_value, add);
        !          4888:           strcpy (new_value + add_len, orig_value);
        !          4889:         }
        !          4890:     }
        !          4891:   else
        !          4892:     {
        !          4893:       new_value = xstrdup (add);
        !          4894:     }
        !          4895:   return new_value;
        !          4896: }
1.1       misho    4897: 
1.1.1.2 ! misho    4898: void
        !          4899: lt_update_exe_path (const char *name, const char *value)
        !          4900: {
        !          4901:   lt_debugprintf (__FILE__, __LINE__,
        !          4902:                  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
        !          4903:                   nonnull (name), nonnull (value));
1.1       misho    4904: 
1.1.1.2 ! misho    4905:   if (name && *name && value && *value)
        !          4906:     {
        !          4907:       char *new_value = lt_extend_str (getenv (name), value, 0);
        !          4908:       /* some systems can't cope with a ':'-terminated path #' */
        !          4909:       int len = strlen (new_value);
        !          4910:       while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
        !          4911:         {
        !          4912:           new_value[len-1] = '\0';
        !          4913:         }
        !          4914:       lt_setenv (name, new_value);
        !          4915:       XFREE (new_value);
        !          4916:     }
        !          4917: }
1.1       misho    4918: 
1.1.1.2 ! misho    4919: void
        !          4920: lt_update_lib_path (const char *name, const char *value)
        !          4921: {
        !          4922:   lt_debugprintf (__FILE__, __LINE__,
        !          4923:                  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
        !          4924:                   nonnull (name), nonnull (value));
1.1       misho    4925: 
1.1.1.2 ! misho    4926:   if (name && *name && value && *value)
        !          4927:     {
        !          4928:       char *new_value = lt_extend_str (getenv (name), value, 0);
        !          4929:       lt_setenv (name, new_value);
        !          4930:       XFREE (new_value);
        !          4931:     }
        !          4932: }
1.1       misho    4933: 
1.1.1.2 ! misho    4934: EOF
        !          4935:            case $host_os in
        !          4936:              mingw*)
        !          4937:                cat <<"EOF"
        !          4938: 
        !          4939: /* Prepares an argument vector before calling spawn().
        !          4940:    Note that spawn() does not by itself call the command interpreter
        !          4941:      (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
        !          4942:       ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
        !          4943:          GetVersionEx(&v);
        !          4944:          v.dwPlatformId == VER_PLATFORM_WIN32_NT;
        !          4945:       }) ? "cmd.exe" : "command.com").
        !          4946:    Instead it simply concatenates the arguments, separated by ' ', and calls
        !          4947:    CreateProcess().  We must quote the arguments since Win32 CreateProcess()
        !          4948:    interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
        !          4949:    special way:
        !          4950:    - Space and tab are interpreted as delimiters. They are not treated as
        !          4951:      delimiters if they are surrounded by double quotes: "...".
        !          4952:    - Unescaped double quotes are removed from the input. Their only effect is
        !          4953:      that within double quotes, space and tab are treated like normal
        !          4954:      characters.
        !          4955:    - Backslashes not followed by double quotes are not special.
        !          4956:    - But 2*n+1 backslashes followed by a double quote become
        !          4957:      n backslashes followed by a double quote (n >= 0):
        !          4958:        \" -> "
        !          4959:        \\\" -> \"
        !          4960:        \\\\\" -> \\"
        !          4961:  */
        !          4962: #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
        !          4963: #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
        !          4964: char **
        !          4965: prepare_spawn (char **argv)
        !          4966: {
        !          4967:   size_t argc;
        !          4968:   char **new_argv;
        !          4969:   size_t i;
1.1       misho    4970: 
1.1.1.2 ! misho    4971:   /* Count number of arguments.  */
        !          4972:   for (argc = 0; argv[argc] != NULL; argc++)
        !          4973:     ;
1.1       misho    4974: 
1.1.1.2 ! misho    4975:   /* Allocate new argument vector.  */
        !          4976:   new_argv = XMALLOC (char *, argc + 1);
        !          4977: 
        !          4978:   /* Put quoted arguments into the new argument vector.  */
        !          4979:   for (i = 0; i < argc; i++)
        !          4980:     {
        !          4981:       const char *string = argv[i];
        !          4982: 
        !          4983:       if (string[0] == '\0')
        !          4984:        new_argv[i] = xstrdup ("\"\"");
        !          4985:       else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
        !          4986:        {
        !          4987:          int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
        !          4988:          size_t length;
        !          4989:          unsigned int backslashes;
        !          4990:          const char *s;
        !          4991:          char *quoted_string;
        !          4992:          char *p;
        !          4993: 
        !          4994:          length = 0;
        !          4995:          backslashes = 0;
        !          4996:          if (quote_around)
        !          4997:            length++;
        !          4998:          for (s = string; *s != '\0'; s++)
        !          4999:            {
        !          5000:              char c = *s;
        !          5001:              if (c == '"')
        !          5002:                length += backslashes + 1;
        !          5003:              length++;
        !          5004:              if (c == '\\')
        !          5005:                backslashes++;
        !          5006:              else
        !          5007:                backslashes = 0;
        !          5008:            }
        !          5009:          if (quote_around)
        !          5010:            length += backslashes + 1;
        !          5011: 
        !          5012:          quoted_string = XMALLOC (char, length + 1);
        !          5013: 
        !          5014:          p = quoted_string;
        !          5015:          backslashes = 0;
        !          5016:          if (quote_around)
        !          5017:            *p++ = '"';
        !          5018:          for (s = string; *s != '\0'; s++)
        !          5019:            {
        !          5020:              char c = *s;
        !          5021:              if (c == '"')
        !          5022:                {
        !          5023:                  unsigned int j;
        !          5024:                  for (j = backslashes + 1; j > 0; j--)
        !          5025:                    *p++ = '\\';
        !          5026:                }
        !          5027:              *p++ = c;
        !          5028:              if (c == '\\')
        !          5029:                backslashes++;
        !          5030:              else
        !          5031:                backslashes = 0;
        !          5032:            }
        !          5033:          if (quote_around)
        !          5034:            {
        !          5035:              unsigned int j;
        !          5036:              for (j = backslashes; j > 0; j--)
        !          5037:                *p++ = '\\';
        !          5038:              *p++ = '"';
        !          5039:            }
        !          5040:          *p = '\0';
1.1       misho    5041: 
1.1.1.2 ! misho    5042:          new_argv[i] = quoted_string;
        !          5043:        }
        !          5044:       else
        !          5045:        new_argv[i] = (char *) string;
        !          5046:     }
        !          5047:   new_argv[argc] = NULL;
1.1       misho    5048: 
1.1.1.2 ! misho    5049:   return new_argv;
        !          5050: }
        !          5051: EOF
        !          5052:                ;;
        !          5053:            esac
1.1       misho    5054: 
1.1.1.2 ! misho    5055:             cat <<"EOF"
        !          5056: void lt_dump_script (FILE* f)
        !          5057: {
        !          5058: EOF
        !          5059:            func_emit_wrapper yes |
        !          5060:               $SED -e 's/\([\\"]\)/\\\1/g' \
        !          5061:                   -e 's/^/  fputs ("/' -e 's/$/\\n", f);/'
1.1       misho    5062: 
1.1.1.2 ! misho    5063:             cat <<"EOF"
        !          5064: }
        !          5065: EOF
        !          5066: }
        !          5067: # end: func_emit_cwrapperexe_src
1.1       misho    5068: 
1.1.1.2 ! misho    5069: # func_win32_import_lib_p ARG
        !          5070: # True if ARG is an import lib, as indicated by $file_magic_cmd
        !          5071: func_win32_import_lib_p ()
        !          5072: {
        !          5073:     $opt_debug
        !          5074:     case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
        !          5075:     *import*) : ;;
        !          5076:     *) false ;;
        !          5077:     esac
        !          5078: }
1.1       misho    5079: 
1.1.1.2 ! misho    5080: # func_mode_link arg...
        !          5081: func_mode_link ()
        !          5082: {
        !          5083:     $opt_debug
        !          5084:     case $host in
        !          5085:     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
        !          5086:       # It is impossible to link a dll without this setting, and
        !          5087:       # we shouldn't force the makefile maintainer to figure out
        !          5088:       # which system we are compiling for in order to pass an extra
        !          5089:       # flag for every libtool invocation.
        !          5090:       # allow_undefined=no
1.1       misho    5091: 
1.1.1.2 ! misho    5092:       # FIXME: Unfortunately, there are problems with the above when trying
        !          5093:       # to make a dll which has undefined symbols, in which case not
        !          5094:       # even a static library is built.  For now, we need to specify
        !          5095:       # -no-undefined on the libtool link line when we can be certain
        !          5096:       # that all symbols are satisfied, otherwise we get a static library.
        !          5097:       allow_undefined=yes
        !          5098:       ;;
        !          5099:     *)
        !          5100:       allow_undefined=yes
        !          5101:       ;;
        !          5102:     esac
        !          5103:     libtool_args=$nonopt
        !          5104:     base_compile="$nonopt $@"
        !          5105:     compile_command=$nonopt
        !          5106:     finalize_command=$nonopt
1.1       misho    5107: 
1.1.1.2 ! misho    5108:     compile_rpath=
        !          5109:     finalize_rpath=
        !          5110:     compile_shlibpath=
        !          5111:     finalize_shlibpath=
        !          5112:     convenience=
        !          5113:     old_convenience=
        !          5114:     deplibs=
        !          5115:     old_deplibs=
        !          5116:     compiler_flags=
        !          5117:     linker_flags=
        !          5118:     dllsearchpath=
        !          5119:     lib_search_path=`pwd`
        !          5120:     inst_prefix_dir=
        !          5121:     new_inherited_linker_flags=
1.1       misho    5122: 
1.1.1.2 ! misho    5123:     avoid_version=no
        !          5124:     bindir=
        !          5125:     dlfiles=
        !          5126:     dlprefiles=
        !          5127:     dlself=no
        !          5128:     export_dynamic=no
        !          5129:     export_symbols=
        !          5130:     export_symbols_regex=
        !          5131:     generated=
        !          5132:     libobjs=
        !          5133:     ltlibs=
        !          5134:     module=no
        !          5135:     no_install=no
        !          5136:     objs=
        !          5137:     non_pic_objects=
        !          5138:     precious_files_regex=
        !          5139:     prefer_static_libs=no
        !          5140:     preload=no
        !          5141:     prev=
        !          5142:     prevarg=
        !          5143:     release=
        !          5144:     rpath=
        !          5145:     xrpath=
        !          5146:     perm_rpath=
        !          5147:     temp_rpath=
        !          5148:     thread_safe=no
        !          5149:     vinfo=
        !          5150:     vinfo_number=no
        !          5151:     weak_libs=
        !          5152:     single_module="${wl}-single_module"
        !          5153:     func_infer_tag $base_compile
        !          5154: 
        !          5155:     # We need to know -static, to get the right output filenames.
        !          5156:     for arg
        !          5157:     do
        !          5158:       case $arg in
        !          5159:       -shared)
        !          5160:        test "$build_libtool_libs" != yes && \
        !          5161:          func_fatal_configuration "can not build a shared library"
        !          5162:        build_old_libs=no
        !          5163:        break
        !          5164:        ;;
        !          5165:       -all-static | -static | -static-libtool-libs)
        !          5166:        case $arg in
        !          5167:        -all-static)
        !          5168:          if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
        !          5169:            func_warning "complete static linking is impossible in this configuration"
        !          5170:          fi
        !          5171:          if test -n "$link_static_flag"; then
        !          5172:            dlopen_self=$dlopen_self_static
        !          5173:          fi
        !          5174:          prefer_static_libs=yes
1.1       misho    5175:          ;;
1.1.1.2 ! misho    5176:        -static)
        !          5177:          if test -z "$pic_flag" && test -n "$link_static_flag"; then
        !          5178:            dlopen_self=$dlopen_self_static
        !          5179:          fi
        !          5180:          prefer_static_libs=built
1.1       misho    5181:          ;;
1.1.1.2 ! misho    5182:        -static-libtool-libs)
        !          5183:          if test -z "$pic_flag" && test -n "$link_static_flag"; then
        !          5184:            dlopen_self=$dlopen_self_static
        !          5185:          fi
        !          5186:          prefer_static_libs=yes
1.1       misho    5187:          ;;
                   5188:        esac
1.1.1.2 ! misho    5189:        build_libtool_libs=no
        !          5190:        build_old_libs=yes
        !          5191:        break
        !          5192:        ;;
        !          5193:       esac
        !          5194:     done
1.1       misho    5195: 
1.1.1.2 ! misho    5196:     # See if our shared archives depend on static archives.
        !          5197:     test -n "$old_archive_from_new_cmds" && build_old_libs=yes
1.1       misho    5198: 
1.1.1.2 ! misho    5199:     # Go through the arguments, transforming them on the way.
        !          5200:     while test "$#" -gt 0; do
        !          5201:       arg="$1"
        !          5202:       shift
        !          5203:       func_quote_for_eval "$arg"
        !          5204:       qarg=$func_quote_for_eval_unquoted_result
        !          5205:       func_append libtool_args " $func_quote_for_eval_result"
        !          5206: 
        !          5207:       # If the previous option needs an argument, assign it.
        !          5208:       if test -n "$prev"; then
        !          5209:        case $prev in
        !          5210:        output)
        !          5211:          func_append compile_command " @OUTPUT@"
        !          5212:          func_append finalize_command " @OUTPUT@"
1.1       misho    5213:          ;;
                   5214:        esac
                   5215: 
1.1.1.2 ! misho    5216:        case $prev in
        !          5217:        bindir)
        !          5218:          bindir="$arg"
        !          5219:          prev=
        !          5220:          continue
        !          5221:          ;;
        !          5222:        dlfiles|dlprefiles)
        !          5223:          if test "$preload" = no; then
        !          5224:            # Add the symbol object into the linking commands.
        !          5225:            func_append compile_command " @SYMFILE@"
        !          5226:            func_append finalize_command " @SYMFILE@"
        !          5227:            preload=yes
        !          5228:          fi
        !          5229:          case $arg in
        !          5230:          *.la | *.lo) ;;  # We handle these cases below.
        !          5231:          force)
        !          5232:            if test "$dlself" = no; then
        !          5233:              dlself=needless
        !          5234:              export_dynamic=yes
        !          5235:            fi
        !          5236:            prev=
        !          5237:            continue
        !          5238:            ;;
        !          5239:          self)
        !          5240:            if test "$prev" = dlprefiles; then
        !          5241:              dlself=yes
        !          5242:            elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
        !          5243:              dlself=yes
        !          5244:            else
        !          5245:              dlself=needless
        !          5246:              export_dynamic=yes
        !          5247:            fi
        !          5248:            prev=
        !          5249:            continue
        !          5250:            ;;
        !          5251:          *)
        !          5252:            if test "$prev" = dlfiles; then
        !          5253:              func_append dlfiles " $arg"
        !          5254:            else
        !          5255:              func_append dlprefiles " $arg"
        !          5256:            fi
        !          5257:            prev=
        !          5258:            continue
        !          5259:            ;;
        !          5260:          esac
        !          5261:          ;;
        !          5262:        expsyms)
        !          5263:          export_symbols="$arg"
        !          5264:          test -f "$arg" \
        !          5265:            || func_fatal_error "symbol file \`$arg' does not exist"
        !          5266:          prev=
        !          5267:          continue
        !          5268:          ;;
        !          5269:        expsyms_regex)
        !          5270:          export_symbols_regex="$arg"
        !          5271:          prev=
        !          5272:          continue
1.1       misho    5273:          ;;
1.1.1.2 ! misho    5274:        framework)
        !          5275:          case $host in
        !          5276:            *-*-darwin*)
        !          5277:              case "$deplibs " in
        !          5278:                *" $qarg.ltframework "*) ;;
        !          5279:                *) func_append deplibs " $qarg.ltframework" # this is fixed later
        !          5280:                   ;;
        !          5281:              esac
        !          5282:              ;;
        !          5283:          esac
        !          5284:          prev=
        !          5285:          continue
        !          5286:          ;;
        !          5287:        inst_prefix)
        !          5288:          inst_prefix_dir="$arg"
        !          5289:          prev=
        !          5290:          continue
        !          5291:          ;;
        !          5292:        objectlist)
        !          5293:          if test -f "$arg"; then
        !          5294:            save_arg=$arg
        !          5295:            moreargs=
        !          5296:            for fil in `cat "$save_arg"`
        !          5297:            do
        !          5298: #            func_append moreargs " $fil"
        !          5299:              arg=$fil
        !          5300:              # A libtool-controlled object.
1.1       misho    5301: 
1.1.1.2 ! misho    5302:              # Check to see that this really is a libtool object.
        !          5303:              if func_lalib_unsafe_p "$arg"; then
        !          5304:                pic_object=
        !          5305:                non_pic_object=
1.1       misho    5306: 
1.1.1.2 ! misho    5307:                # Read the .lo file
        !          5308:                func_source "$arg"
1.1       misho    5309: 
1.1.1.2 ! misho    5310:                if test -z "$pic_object" ||
        !          5311:                   test -z "$non_pic_object" ||
        !          5312:                   test "$pic_object" = none &&
        !          5313:                   test "$non_pic_object" = none; then
        !          5314:                  func_fatal_error "cannot find name of object for \`$arg'"
        !          5315:                fi
1.1       misho    5316: 
1.1.1.2 ! misho    5317:                # Extract subdirectory from the argument.
        !          5318:                func_dirname "$arg" "/" ""
        !          5319:                xdir="$func_dirname_result"
1.1       misho    5320: 
1.1.1.2 ! misho    5321:                if test "$pic_object" != none; then
        !          5322:                  # Prepend the subdirectory the object is found in.
        !          5323:                  pic_object="$xdir$pic_object"
1.1       misho    5324: 
1.1.1.2 ! misho    5325:                  if test "$prev" = dlfiles; then
        !          5326:                    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
        !          5327:                      func_append dlfiles " $pic_object"
        !          5328:                      prev=
        !          5329:                      continue
        !          5330:                    else
        !          5331:                      # If libtool objects are unsupported, then we need to preload.
        !          5332:                      prev=dlprefiles
        !          5333:                    fi
        !          5334:                  fi
1.1       misho    5335: 
1.1.1.2 ! misho    5336:                  # CHECK ME:  I think I busted this.  -Ossama
        !          5337:                  if test "$prev" = dlprefiles; then
        !          5338:                    # Preload the old-style object.
        !          5339:                    func_append dlprefiles " $pic_object"
        !          5340:                    prev=
        !          5341:                  fi
1.1       misho    5342: 
1.1.1.2 ! misho    5343:                  # A PIC object.
        !          5344:                  func_append libobjs " $pic_object"
        !          5345:                  arg="$pic_object"
        !          5346:                fi
1.1       misho    5347: 
1.1.1.2 ! misho    5348:                # Non-PIC object.
        !          5349:                if test "$non_pic_object" != none; then
        !          5350:                  # Prepend the subdirectory the object is found in.
        !          5351:                  non_pic_object="$xdir$non_pic_object"
1.1       misho    5352: 
1.1.1.2 ! misho    5353:                  # A standard non-PIC object
        !          5354:                  func_append non_pic_objects " $non_pic_object"
        !          5355:                  if test -z "$pic_object" || test "$pic_object" = none ; then
        !          5356:                    arg="$non_pic_object"
        !          5357:                  fi
        !          5358:                else
        !          5359:                  # If the PIC object exists, use it instead.
        !          5360:                  # $xdir was prepended to $pic_object above.
        !          5361:                  non_pic_object="$pic_object"
        !          5362:                  func_append non_pic_objects " $non_pic_object"
        !          5363:                fi
        !          5364:              else
        !          5365:                # Only an error if not doing a dry-run.
        !          5366:                if $opt_dry_run; then
        !          5367:                  # Extract subdirectory from the argument.
        !          5368:                  func_dirname "$arg" "/" ""
        !          5369:                  xdir="$func_dirname_result"
1.1       misho    5370: 
1.1.1.2 ! misho    5371:                  func_lo2o "$arg"
        !          5372:                  pic_object=$xdir$objdir/$func_lo2o_result
        !          5373:                  non_pic_object=$xdir$func_lo2o_result
        !          5374:                  func_append libobjs " $pic_object"
        !          5375:                  func_append non_pic_objects " $non_pic_object"
        !          5376:                else
        !          5377:                  func_fatal_error "\`$arg' is not a valid libtool object"
        !          5378:                fi
        !          5379:              fi
        !          5380:            done
        !          5381:          else
        !          5382:            func_fatal_error "link input file \`$arg' does not exist"
        !          5383:          fi
        !          5384:          arg=$save_arg
        !          5385:          prev=
        !          5386:          continue
1.1       misho    5387:          ;;
1.1.1.2 ! misho    5388:        precious_regex)
        !          5389:          precious_files_regex="$arg"
        !          5390:          prev=
        !          5391:          continue
1.1       misho    5392:          ;;
1.1.1.2 ! misho    5393:        release)
        !          5394:          release="-$arg"
        !          5395:          prev=
        !          5396:          continue
1.1       misho    5397:          ;;
1.1.1.2 ! misho    5398:        rpath | xrpath)
        !          5399:          # We need an absolute path.
        !          5400:          case $arg in
        !          5401:          [\\/]* | [A-Za-z]:[\\/]*) ;;
1.1       misho    5402:          *)
1.1.1.2 ! misho    5403:            func_fatal_error "only absolute run-paths are allowed"
1.1       misho    5404:            ;;
                   5405:          esac
1.1.1.2 ! misho    5406:          if test "$prev" = rpath; then
        !          5407:            case "$rpath " in
        !          5408:            *" $arg "*) ;;
        !          5409:            *) func_append rpath " $arg" ;;
        !          5410:            esac
1.1       misho    5411:          else
1.1.1.2 ! misho    5412:            case "$xrpath " in
        !          5413:            *" $arg "*) ;;
        !          5414:            *) func_append xrpath " $arg" ;;
        !          5415:            esac
1.1       misho    5416:          fi
1.1.1.2 ! misho    5417:          prev=
        !          5418:          continue
        !          5419:          ;;
        !          5420:        shrext)
        !          5421:          shrext_cmds="$arg"
        !          5422:          prev=
        !          5423:          continue
        !          5424:          ;;
        !          5425:        weak)
        !          5426:          func_append weak_libs " $arg"
        !          5427:          prev=
        !          5428:          continue
        !          5429:          ;;
        !          5430:        xcclinker)
        !          5431:          func_append linker_flags " $qarg"
        !          5432:          func_append compiler_flags " $qarg"
        !          5433:          prev=
        !          5434:          func_append compile_command " $qarg"
        !          5435:          func_append finalize_command " $qarg"
        !          5436:          continue
        !          5437:          ;;
        !          5438:        xcompiler)
        !          5439:          func_append compiler_flags " $qarg"
        !          5440:          prev=
        !          5441:          func_append compile_command " $qarg"
        !          5442:          func_append finalize_command " $qarg"
        !          5443:          continue
        !          5444:          ;;
        !          5445:        xlinker)
        !          5446:          func_append linker_flags " $qarg"
        !          5447:          func_append compiler_flags " $wl$qarg"
        !          5448:          prev=
        !          5449:          func_append compile_command " $wl$qarg"
        !          5450:          func_append finalize_command " $wl$qarg"
        !          5451:          continue
        !          5452:          ;;
        !          5453:        *)
        !          5454:          eval "$prev=\"\$arg\""
        !          5455:          prev=
        !          5456:          continue
        !          5457:          ;;
        !          5458:        esac
        !          5459:       fi # test -n "$prev"
1.1       misho    5460: 
1.1.1.2 ! misho    5461:       prevarg="$arg"
1.1       misho    5462: 
1.1.1.2 ! misho    5463:       case $arg in
        !          5464:       -all-static)
        !          5465:        if test -n "$link_static_flag"; then
        !          5466:          # See comment for -static flag below, for more details.
        !          5467:          func_append compile_command " $link_static_flag"
        !          5468:          func_append finalize_command " $link_static_flag"
1.1       misho    5469:        fi
1.1.1.2 ! misho    5470:        continue
        !          5471:        ;;
1.1       misho    5472: 
1.1.1.2 ! misho    5473:       -allow-undefined)
        !          5474:        # FIXME: remove this flag sometime in the future.
        !          5475:        func_fatal_error "\`-allow-undefined' must not be used because it is the default"
        !          5476:        ;;
1.1       misho    5477: 
1.1.1.2 ! misho    5478:       -avoid-version)
        !          5479:        avoid_version=yes
        !          5480:        continue
        !          5481:        ;;
1.1       misho    5482: 
1.1.1.2 ! misho    5483:       -bindir)
        !          5484:        prev=bindir
        !          5485:        continue
        !          5486:        ;;
1.1       misho    5487: 
1.1.1.2 ! misho    5488:       -dlopen)
        !          5489:        prev=dlfiles
        !          5490:        continue
        !          5491:        ;;
1.1       misho    5492: 
1.1.1.2 ! misho    5493:       -dlpreopen)
        !          5494:        prev=dlprefiles
        !          5495:        continue
        !          5496:        ;;
        !          5497: 
        !          5498:       -export-dynamic)
        !          5499:        export_dynamic=yes
        !          5500:        continue
        !          5501:        ;;
        !          5502: 
        !          5503:       -export-symbols | -export-symbols-regex)
        !          5504:        if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
        !          5505:          func_fatal_error "more than one -exported-symbols argument is not allowed"
1.1       misho    5506:        fi
1.1.1.2 ! misho    5507:        if test "X$arg" = "X-export-symbols"; then
        !          5508:          prev=expsyms
        !          5509:        else
        !          5510:          prev=expsyms_regex
        !          5511:        fi
        !          5512:        continue
        !          5513:        ;;
        !          5514: 
        !          5515:       -framework)
        !          5516:        prev=framework
        !          5517:        continue
        !          5518:        ;;
1.1       misho    5519: 
1.1.1.2 ! misho    5520:       -inst-prefix-dir)
        !          5521:        prev=inst_prefix
        !          5522:        continue
        !          5523:        ;;
        !          5524: 
        !          5525:       # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
        !          5526:       # so, if we see these flags be careful not to treat them like -L
        !          5527:       -L[A-Z][A-Z]*:*)
        !          5528:        case $with_gcc/$host in
        !          5529:        no/*-*-irix* | /*-*-irix*)
        !          5530:          func_append compile_command " $arg"
        !          5531:          func_append finalize_command " $arg"
        !          5532:          ;;
1.1       misho    5533:        esac
1.1.1.2 ! misho    5534:        continue
        !          5535:        ;;
1.1       misho    5536: 
1.1.1.2 ! misho    5537:       -L*)
        !          5538:        func_stripname "-L" '' "$arg"
        !          5539:        if test -z "$func_stripname_result"; then
        !          5540:          if test "$#" -gt 0; then
        !          5541:            func_fatal_error "require no space between \`-L' and \`$1'"
        !          5542:          else
        !          5543:            func_fatal_error "need path for \`-L' option"
        !          5544:          fi
        !          5545:        fi
        !          5546:        func_resolve_sysroot "$func_stripname_result"
        !          5547:        dir=$func_resolve_sysroot_result
        !          5548:        # We need an absolute path.
        !          5549:        case $dir in
        !          5550:        [\\/]* | [A-Za-z]:[\\/]*) ;;
        !          5551:        *)
        !          5552:          absdir=`cd "$dir" && pwd`
        !          5553:          test -z "$absdir" && \
        !          5554:            func_fatal_error "cannot determine absolute directory name of \`$dir'"
        !          5555:          dir="$absdir"
        !          5556:          ;;
1.1       misho    5557:        esac
1.1.1.2 ! misho    5558:        case "$deplibs " in
        !          5559:        *" -L$dir "* | *" $arg "*)
        !          5560:          # Will only happen for absolute or sysroot arguments
        !          5561:          ;;
        !          5562:        *)
        !          5563:          # Preserve sysroot, but never include relative directories
        !          5564:          case $dir in
        !          5565:            [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
        !          5566:            *) func_append deplibs " -L$dir" ;;
        !          5567:          esac
        !          5568:          func_append lib_search_path " $dir"
        !          5569:          ;;
        !          5570:        esac
        !          5571:        case $host in
        !          5572:        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
        !          5573:          testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
        !          5574:          case :$dllsearchpath: in
        !          5575:          *":$dir:"*) ;;
        !          5576:          ::) dllsearchpath=$dir;;
        !          5577:          *) func_append dllsearchpath ":$dir";;
        !          5578:          esac
        !          5579:          case :$dllsearchpath: in
        !          5580:          *":$testbindir:"*) ;;
        !          5581:          ::) dllsearchpath=$testbindir;;
        !          5582:          *) func_append dllsearchpath ":$testbindir";;
        !          5583:          esac
        !          5584:          ;;
        !          5585:        esac
        !          5586:        continue
        !          5587:        ;;
1.1       misho    5588: 
1.1.1.2 ! misho    5589:       -l*)
        !          5590:        if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
1.1       misho    5591:          case $host in
1.1.1.2 ! misho    5592:          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
        !          5593:            # These systems don't actually have a C or math library (as such)
        !          5594:            continue
1.1       misho    5595:            ;;
1.1.1.2 ! misho    5596:          *-*-os2*)
        !          5597:            # These systems don't actually have a C library (as such)
        !          5598:            test "X$arg" = "X-lc" && continue
1.1       misho    5599:            ;;
                   5600:          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
                   5601:            # Do not include libc due to us having libc/libc_r.
1.1.1.2 ! misho    5602:            test "X$arg" = "X-lc" && continue
        !          5603:            ;;
        !          5604:          *-*-rhapsody* | *-*-darwin1.[012])
        !          5605:            # Rhapsody C and math libraries are in the System framework
        !          5606:            func_append deplibs " System.ltframework"
        !          5607:            continue
1.1       misho    5608:            ;;
                   5609:          *-*-sco3.2v5* | *-*-sco5v6*)
                   5610:            # Causes problems with __ctype
1.1.1.2 ! misho    5611:            test "X$arg" = "X-lc" && continue
1.1       misho    5612:            ;;
                   5613:          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
                   5614:            # Compiler inserts libc in the correct place for threads to work
1.1.1.2 ! misho    5615:            test "X$arg" = "X-lc" && continue
1.1       misho    5616:            ;;
                   5617:          esac
1.1.1.2 ! misho    5618:        elif test "X$arg" = "X-lc_r"; then
        !          5619:         case $host in
        !          5620:         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
        !          5621:           # Do not include libc_r directly, use -pthread flag.
        !          5622:           continue
        !          5623:           ;;
        !          5624:         esac
1.1       misho    5625:        fi
1.1.1.2 ! misho    5626:        func_append deplibs " $arg"
        !          5627:        continue
        !          5628:        ;;
1.1       misho    5629: 
1.1.1.2 ! misho    5630:       -module)
        !          5631:        module=yes
        !          5632:        continue
        !          5633:        ;;
        !          5634: 
        !          5635:       # Tru64 UNIX uses -model [arg] to determine the layout of C++
        !          5636:       # classes, name mangling, and exception handling.
        !          5637:       # Darwin uses the -arch flag to determine output architecture.
        !          5638:       -model|-arch|-isysroot|--sysroot)
        !          5639:        func_append compiler_flags " $arg"
        !          5640:        func_append compile_command " $arg"
        !          5641:        func_append finalize_command " $arg"
        !          5642:        prev=xcompiler
        !          5643:        continue
        !          5644:        ;;
        !          5645: 
        !          5646:       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
        !          5647:        func_append compiler_flags " $arg"
        !          5648:        func_append compile_command " $arg"
        !          5649:        func_append finalize_command " $arg"
        !          5650:        case "$new_inherited_linker_flags " in
        !          5651:            *" $arg "*) ;;
        !          5652:            * ) func_append new_inherited_linker_flags " $arg" ;;
1.1       misho    5653:        esac
1.1.1.2 ! misho    5654:        continue
        !          5655:        ;;
        !          5656: 
        !          5657:       -multi_module)
        !          5658:        single_module="${wl}-multi_module"
        !          5659:        continue
        !          5660:        ;;
        !          5661: 
        !          5662:       -no-fast-install)
        !          5663:        fast_install=no
        !          5664:        continue
        !          5665:        ;;
1.1       misho    5666: 
1.1.1.2 ! misho    5667:       -no-install)
1.1       misho    5668:        case $host in
1.1.1.2 ! misho    5669:        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
        !          5670:          # The PATH hackery in wrapper scripts is required on Windows
        !          5671:          # and Darwin in order for the loader to find any dlls it needs.
        !          5672:          func_warning "\`-no-install' is ignored for $host"
        !          5673:          func_warning "assuming \`-no-fast-install' instead"
        !          5674:          fast_install=no
1.1       misho    5675:          ;;
1.1.1.2 ! misho    5676:        *) no_install=yes ;;
1.1       misho    5677:        esac
1.1.1.2 ! misho    5678:        continue
        !          5679:        ;;
1.1       misho    5680: 
1.1.1.2 ! misho    5681:       -no-undefined)
        !          5682:        allow_undefined=no
        !          5683:        continue
        !          5684:        ;;
1.1       misho    5685: 
1.1.1.2 ! misho    5686:       -objectlist)
        !          5687:        prev=objectlist
        !          5688:        continue
        !          5689:        ;;
1.1       misho    5690: 
1.1.1.2 ! misho    5691:       -o) prev=output ;;
1.1       misho    5692: 
1.1.1.2 ! misho    5693:       -precious-files-regex)
        !          5694:        prev=precious_regex
        !          5695:        continue
        !          5696:        ;;
        !          5697: 
        !          5698:       -release)
        !          5699:        prev=release
        !          5700:        continue
        !          5701:        ;;
        !          5702: 
        !          5703:       -rpath)
        !          5704:        prev=rpath
        !          5705:        continue
        !          5706:        ;;
        !          5707: 
        !          5708:       -R)
        !          5709:        prev=xrpath
        !          5710:        continue
        !          5711:        ;;
        !          5712: 
        !          5713:       -R*)
        !          5714:        func_stripname '-R' '' "$arg"
        !          5715:        dir=$func_stripname_result
        !          5716:        # We need an absolute path.
        !          5717:        case $dir in
        !          5718:        [\\/]* | [A-Za-z]:[\\/]*) ;;
        !          5719:        =*)
        !          5720:          func_stripname '=' '' "$dir"
        !          5721:          dir=$lt_sysroot$func_stripname_result
        !          5722:          ;;
1.1       misho    5723:        *)
1.1.1.2 ! misho    5724:          func_fatal_error "only absolute run-paths are allowed"
1.1       misho    5725:          ;;
                   5726:        esac
1.1.1.2 ! misho    5727:        case "$xrpath " in
        !          5728:        *" $dir "*) ;;
        !          5729:        *) func_append xrpath " $dir" ;;
1.1       misho    5730:        esac
1.1.1.2 ! misho    5731:        continue
        !          5732:        ;;
1.1       misho    5733: 
1.1.1.2 ! misho    5734:       -shared)
        !          5735:        # The effects of -shared are defined in a previous loop.
        !          5736:        continue
        !          5737:        ;;
1.1       misho    5738: 
1.1.1.2 ! misho    5739:       -shrext)
        !          5740:        prev=shrext
        !          5741:        continue
        !          5742:        ;;
1.1       misho    5743: 
1.1.1.2 ! misho    5744:       -static | -static-libtool-libs)
        !          5745:        # The effects of -static are defined in a previous loop.
        !          5746:        # We used to do the same as -all-static on platforms that
        !          5747:        # didn't have a PIC flag, but the assumption that the effects
        !          5748:        # would be equivalent was wrong.  It would break on at least
        !          5749:        # Digital Unix and AIX.
        !          5750:        continue
        !          5751:        ;;
1.1       misho    5752: 
1.1.1.2 ! misho    5753:       -thread-safe)
        !          5754:        thread_safe=yes
        !          5755:        continue
        !          5756:        ;;
        !          5757: 
        !          5758:       -version-info)
        !          5759:        prev=vinfo
        !          5760:        continue
        !          5761:        ;;
        !          5762: 
        !          5763:       -version-number)
        !          5764:        prev=vinfo
        !          5765:        vinfo_number=yes
        !          5766:        continue
        !          5767:        ;;
        !          5768: 
        !          5769:       -weak)
        !          5770:         prev=weak
        !          5771:        continue
        !          5772:        ;;
        !          5773: 
        !          5774:       -Wc,*)
        !          5775:        func_stripname '-Wc,' '' "$arg"
        !          5776:        args=$func_stripname_result
        !          5777:        arg=
        !          5778:        save_ifs="$IFS"; IFS=','
        !          5779:        for flag in $args; do
        !          5780:          IFS="$save_ifs"
        !          5781:           func_quote_for_eval "$flag"
        !          5782:          func_append arg " $func_quote_for_eval_result"
        !          5783:          func_append compiler_flags " $func_quote_for_eval_result"
        !          5784:        done
        !          5785:        IFS="$save_ifs"
        !          5786:        func_stripname ' ' '' "$arg"
        !          5787:        arg=$func_stripname_result
        !          5788:        ;;
        !          5789: 
        !          5790:       -Wl,*)
        !          5791:        func_stripname '-Wl,' '' "$arg"
        !          5792:        args=$func_stripname_result
        !          5793:        arg=
        !          5794:        save_ifs="$IFS"; IFS=','
        !          5795:        for flag in $args; do
        !          5796:          IFS="$save_ifs"
        !          5797:           func_quote_for_eval "$flag"
        !          5798:          func_append arg " $wl$func_quote_for_eval_result"
        !          5799:          func_append compiler_flags " $wl$func_quote_for_eval_result"
        !          5800:          func_append linker_flags " $func_quote_for_eval_result"
        !          5801:        done
        !          5802:        IFS="$save_ifs"
        !          5803:        func_stripname ' ' '' "$arg"
        !          5804:        arg=$func_stripname_result
        !          5805:        ;;
        !          5806: 
        !          5807:       -Xcompiler)
        !          5808:        prev=xcompiler
        !          5809:        continue
        !          5810:        ;;
        !          5811: 
        !          5812:       -Xlinker)
        !          5813:        prev=xlinker
        !          5814:        continue
        !          5815:        ;;
        !          5816: 
        !          5817:       -XCClinker)
        !          5818:        prev=xcclinker
        !          5819:        continue
        !          5820:        ;;
        !          5821: 
        !          5822:       # -msg_* for osf cc
        !          5823:       -msg_*)
        !          5824:        func_quote_for_eval "$arg"
        !          5825:        arg="$func_quote_for_eval_result"
        !          5826:        ;;
        !          5827: 
        !          5828:       # Flags to be passed through unchanged, with rationale:
        !          5829:       # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
        !          5830:       # -r[0-9][0-9]*        specify processor for the SGI compiler
        !          5831:       # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
        !          5832:       # +DA*, +DD*           enable 64-bit mode for the HP compiler
        !          5833:       # -q*                  compiler args for the IBM compiler
        !          5834:       # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
        !          5835:       # -F/path              path to uninstalled frameworks, gcc on darwin
        !          5836:       # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
        !          5837:       # @file                GCC response files
        !          5838:       # -tp=*                Portland pgcc target processor selection
        !          5839:       # --sysroot=*          for sysroot support
        !          5840:       # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
        !          5841:       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
        !          5842:       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
        !          5843:       -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
        !          5844:         func_quote_for_eval "$arg"
        !          5845:        arg="$func_quote_for_eval_result"
        !          5846:         func_append compile_command " $arg"
        !          5847:         func_append finalize_command " $arg"
        !          5848:         func_append compiler_flags " $arg"
        !          5849:         continue
        !          5850:         ;;
        !          5851: 
        !          5852:       # Some other compiler flag.
        !          5853:       -* | +*)
        !          5854:         func_quote_for_eval "$arg"
        !          5855:        arg="$func_quote_for_eval_result"
        !          5856:        ;;
        !          5857: 
        !          5858:       *.$objext)
        !          5859:        # A standard object.
        !          5860:        func_append objs " $arg"
        !          5861:        ;;
        !          5862: 
        !          5863:       *.lo)
        !          5864:        # A libtool-controlled object.
        !          5865: 
        !          5866:        # Check to see that this really is a libtool object.
        !          5867:        if func_lalib_unsafe_p "$arg"; then
        !          5868:          pic_object=
        !          5869:          non_pic_object=
1.1       misho    5870: 
1.1.1.2 ! misho    5871:          # Read the .lo file
        !          5872:          func_source "$arg"
1.1       misho    5873: 
1.1.1.2 ! misho    5874:          if test -z "$pic_object" ||
        !          5875:             test -z "$non_pic_object" ||
        !          5876:             test "$pic_object" = none &&
        !          5877:             test "$non_pic_object" = none; then
        !          5878:            func_fatal_error "cannot find name of object for \`$arg'"
        !          5879:          fi
1.1       misho    5880: 
1.1.1.2 ! misho    5881:          # Extract subdirectory from the argument.
        !          5882:          func_dirname "$arg" "/" ""
        !          5883:          xdir="$func_dirname_result"
1.1       misho    5884: 
1.1.1.2 ! misho    5885:          if test "$pic_object" != none; then
        !          5886:            # Prepend the subdirectory the object is found in.
        !          5887:            pic_object="$xdir$pic_object"
1.1       misho    5888: 
1.1.1.2 ! misho    5889:            if test "$prev" = dlfiles; then
        !          5890:              if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
        !          5891:                func_append dlfiles " $pic_object"
        !          5892:                prev=
        !          5893:                continue
1.1       misho    5894:              else
1.1.1.2 ! misho    5895:                # If libtool objects are unsupported, then we need to preload.
        !          5896:                prev=dlprefiles
1.1       misho    5897:              fi
                   5898:            fi
                   5899: 
1.1.1.2 ! misho    5900:            # CHECK ME:  I think I busted this.  -Ossama
        !          5901:            if test "$prev" = dlprefiles; then
        !          5902:              # Preload the old-style object.
        !          5903:              func_append dlprefiles " $pic_object"
        !          5904:              prev=
        !          5905:            fi
1.1       misho    5906: 
1.1.1.2 ! misho    5907:            # A PIC object.
        !          5908:            func_append libobjs " $pic_object"
        !          5909:            arg="$pic_object"
1.1       misho    5910:          fi
                   5911: 
1.1.1.2 ! misho    5912:          # Non-PIC object.
        !          5913:          if test "$non_pic_object" != none; then
        !          5914:            # Prepend the subdirectory the object is found in.
        !          5915:            non_pic_object="$xdir$non_pic_object"
1.1       misho    5916: 
1.1.1.2 ! misho    5917:            # A standard non-PIC object
        !          5918:            func_append non_pic_objects " $non_pic_object"
        !          5919:            if test -z "$pic_object" || test "$pic_object" = none ; then
        !          5920:              arg="$non_pic_object"
        !          5921:            fi
1.1       misho    5922:          else
1.1.1.2 ! misho    5923:            # If the PIC object exists, use it instead.
        !          5924:            # $xdir was prepended to $pic_object above.
        !          5925:            non_pic_object="$pic_object"
        !          5926:            func_append non_pic_objects " $non_pic_object"
1.1       misho    5927:          fi
                   5928:        else
1.1.1.2 ! misho    5929:          # Only an error if not doing a dry-run.
        !          5930:          if $opt_dry_run; then
        !          5931:            # Extract subdirectory from the argument.
        !          5932:            func_dirname "$arg" "/" ""
        !          5933:            xdir="$func_dirname_result"
        !          5934: 
        !          5935:            func_lo2o "$arg"
        !          5936:            pic_object=$xdir$objdir/$func_lo2o_result
        !          5937:            non_pic_object=$xdir$func_lo2o_result
        !          5938:            func_append libobjs " $pic_object"
        !          5939:            func_append non_pic_objects " $non_pic_object"
        !          5940:          else
        !          5941:            func_fatal_error "\`$arg' is not a valid libtool object"
1.1       misho    5942:          fi
                   5943:        fi
1.1.1.2 ! misho    5944:        ;;
1.1       misho    5945: 
1.1.1.2 ! misho    5946:       *.$libext)
        !          5947:        # An archive.
        !          5948:        func_append deplibs " $arg"
        !          5949:        func_append old_deplibs " $arg"
        !          5950:        continue
        !          5951:        ;;
        !          5952: 
        !          5953:       *.la)
        !          5954:        # A libtool-controlled library.
        !          5955: 
        !          5956:        func_resolve_sysroot "$arg"
        !          5957:        if test "$prev" = dlfiles; then
        !          5958:          # This library was specified with -dlopen.
        !          5959:          func_append dlfiles " $func_resolve_sysroot_result"
        !          5960:          prev=
        !          5961:        elif test "$prev" = dlprefiles; then
        !          5962:          # The library was specified with -dlpreopen.
        !          5963:          func_append dlprefiles " $func_resolve_sysroot_result"
        !          5964:          prev=
1.1       misho    5965:        else
1.1.1.2 ! misho    5966:          func_append deplibs " $func_resolve_sysroot_result"
        !          5967:        fi
        !          5968:        continue
        !          5969:        ;;
1.1       misho    5970: 
1.1.1.2 ! misho    5971:       # Some other compiler argument.
        !          5972:       *)
        !          5973:        # Unknown arguments in both finalize_command and compile_command need
        !          5974:        # to be aesthetically quoted because they are evaled later.
        !          5975:        func_quote_for_eval "$arg"
        !          5976:        arg="$func_quote_for_eval_result"
        !          5977:        ;;
        !          5978:       esac # arg
1.1       misho    5979: 
1.1.1.2 ! misho    5980:       # Now actually substitute the argument into the commands.
        !          5981:       if test -n "$arg"; then
        !          5982:        func_append compile_command " $arg"
        !          5983:        func_append finalize_command " $arg"
        !          5984:       fi
        !          5985:     done # argument parsing loop
1.1       misho    5986: 
1.1.1.2 ! misho    5987:     test -n "$prev" && \
        !          5988:       func_fatal_help "the \`$prevarg' option requires an argument"
        !          5989: 
        !          5990:     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
        !          5991:       eval arg=\"$export_dynamic_flag_spec\"
        !          5992:       func_append compile_command " $arg"
        !          5993:       func_append finalize_command " $arg"
        !          5994:     fi
        !          5995: 
        !          5996:     oldlibs=
        !          5997:     # calculate the name of the file, without its directory
        !          5998:     func_basename "$output"
        !          5999:     outputname="$func_basename_result"
        !          6000:     libobjs_save="$libobjs"
        !          6001: 
        !          6002:     if test -n "$shlibpath_var"; then
        !          6003:       # get the directories listed in $shlibpath_var
        !          6004:       eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
        !          6005:     else
        !          6006:       shlib_search_path=
        !          6007:     fi
        !          6008:     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
        !          6009:     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
        !          6010: 
        !          6011:     func_dirname "$output" "/" ""
        !          6012:     output_objdir="$func_dirname_result$objdir"
        !          6013:     func_to_tool_file "$output_objdir/"
        !          6014:     tool_output_objdir=$func_to_tool_file_result
        !          6015:     # Create the object directory.
        !          6016:     func_mkdir_p "$output_objdir"
        !          6017: 
        !          6018:     # Determine the type of output
        !          6019:     case $output in
        !          6020:     "")
        !          6021:       func_fatal_help "you must specify an output file"
        !          6022:       ;;
        !          6023:     *.$libext) linkmode=oldlib ;;
        !          6024:     *.lo | *.$objext) linkmode=obj ;;
        !          6025:     *.la) linkmode=lib ;;
        !          6026:     *) linkmode=prog ;; # Anything else should be a program.
        !          6027:     esac
        !          6028: 
        !          6029:     specialdeplibs=
        !          6030: 
        !          6031:     libs=
        !          6032:     # Find all interdependent deplibs by searching for libraries
        !          6033:     # that are linked more than once (e.g. -la -lb -la)
        !          6034:     for deplib in $deplibs; do
        !          6035:       if $opt_preserve_dup_deps ; then
        !          6036:        case "$libs " in
        !          6037:        *" $deplib "*) func_append specialdeplibs " $deplib" ;;
        !          6038:        esac
        !          6039:       fi
        !          6040:       func_append libs " $deplib"
        !          6041:     done
        !          6042: 
        !          6043:     if test "$linkmode" = lib; then
        !          6044:       libs="$predeps $libs $compiler_lib_search_path $postdeps"
        !          6045: 
        !          6046:       # Compute libraries that are listed more than once in $predeps
        !          6047:       # $postdeps and mark them as special (i.e., whose duplicates are
        !          6048:       # not to be eliminated).
        !          6049:       pre_post_deps=
        !          6050:       if $opt_duplicate_compiler_generated_deps; then
        !          6051:        for pre_post_dep in $predeps $postdeps; do
        !          6052:          case "$pre_post_deps " in
        !          6053:          *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
        !          6054:          esac
        !          6055:          func_append pre_post_deps " $pre_post_dep"
        !          6056:        done
        !          6057:       fi
        !          6058:       pre_post_deps=
        !          6059:     fi
        !          6060: 
        !          6061:     deplibs=
        !          6062:     newdependency_libs=
        !          6063:     newlib_search_path=
        !          6064:     need_relink=no # whether we're linking any uninstalled libtool libraries
        !          6065:     notinst_deplibs= # not-installed libtool libraries
        !          6066:     notinst_path= # paths that contain not-installed libtool libraries
        !          6067: 
        !          6068:     case $linkmode in
        !          6069:     lib)
        !          6070:        passes="conv dlpreopen link"
        !          6071:        for file in $dlfiles $dlprefiles; do
        !          6072:          case $file in
        !          6073:          *.la) ;;
        !          6074:          *)
        !          6075:            func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
        !          6076:            ;;
        !          6077:          esac
        !          6078:        done
        !          6079:        ;;
        !          6080:     prog)
        !          6081:        compile_deplibs=
        !          6082:        finalize_deplibs=
        !          6083:        alldeplibs=no
        !          6084:        newdlfiles=
        !          6085:        newdlprefiles=
        !          6086:        passes="conv scan dlopen dlpreopen link"
        !          6087:        ;;
        !          6088:     *)  passes="conv"
        !          6089:        ;;
        !          6090:     esac
        !          6091: 
        !          6092:     for pass in $passes; do
        !          6093:       # The preopen pass in lib mode reverses $deplibs; put it back here
        !          6094:       # so that -L comes before libs that need it for instance...
        !          6095:       if test "$linkmode,$pass" = "lib,link"; then
        !          6096:        ## FIXME: Find the place where the list is rebuilt in the wrong
        !          6097:        ##        order, and fix it there properly
        !          6098:         tmp_deplibs=
        !          6099:        for deplib in $deplibs; do
        !          6100:          tmp_deplibs="$deplib $tmp_deplibs"
        !          6101:        done
        !          6102:        deplibs="$tmp_deplibs"
        !          6103:       fi
1.1       misho    6104: 
1.1.1.2 ! misho    6105:       if test "$linkmode,$pass" = "lib,link" ||
        !          6106:         test "$linkmode,$pass" = "prog,scan"; then
        !          6107:        libs="$deplibs"
        !          6108:        deplibs=
        !          6109:       fi
        !          6110:       if test "$linkmode" = prog; then
        !          6111:        case $pass in
        !          6112:        dlopen) libs="$dlfiles" ;;
        !          6113:        dlpreopen) libs="$dlprefiles" ;;
        !          6114:        link)
        !          6115:          libs="$deplibs %DEPLIBS%"
        !          6116:          test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
        !          6117:          ;;
        !          6118:        esac
        !          6119:       fi
        !          6120:       if test "$linkmode,$pass" = "lib,dlpreopen"; then
        !          6121:        # Collect and forward deplibs of preopened libtool libs
        !          6122:        for lib in $dlprefiles; do
        !          6123:          # Ignore non-libtool-libs
        !          6124:          dependency_libs=
        !          6125:          func_resolve_sysroot "$lib"
        !          6126:          case $lib in
        !          6127:          *.la) func_source "$func_resolve_sysroot_result" ;;
        !          6128:          esac
1.1       misho    6129: 
1.1.1.2 ! misho    6130:          # Collect preopened libtool deplibs, except any this library
        !          6131:          # has declared as weak libs
        !          6132:          for deplib in $dependency_libs; do
        !          6133:            func_basename "$deplib"
        !          6134:             deplib_base=$func_basename_result
        !          6135:            case " $weak_libs " in
        !          6136:            *" $deplib_base "*) ;;
        !          6137:            *) func_append deplibs " $deplib" ;;
        !          6138:            esac
1.1       misho    6139:          done
1.1.1.2 ! misho    6140:        done
        !          6141:        libs="$dlprefiles"
        !          6142:       fi
        !          6143:       if test "$pass" = dlopen; then
        !          6144:        # Collect dlpreopened libraries
        !          6145:        save_deplibs="$deplibs"
        !          6146:        deplibs=
        !          6147:       fi
1.1       misho    6148: 
1.1.1.2 ! misho    6149:       for deplib in $libs; do
        !          6150:        lib=
        !          6151:        found=no
        !          6152:        case $deplib in
        !          6153:        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
        !          6154:          if test "$linkmode,$pass" = "prog,link"; then
        !          6155:            compile_deplibs="$deplib $compile_deplibs"
        !          6156:            finalize_deplibs="$deplib $finalize_deplibs"
        !          6157:          else
        !          6158:            func_append compiler_flags " $deplib"
        !          6159:            if test "$linkmode" = lib ; then
        !          6160:                case "$new_inherited_linker_flags " in
        !          6161:                    *" $deplib "*) ;;
        !          6162:                    * ) func_append new_inherited_linker_flags " $deplib" ;;
        !          6163:                esac
        !          6164:            fi
1.1       misho    6165:          fi
1.1.1.2 ! misho    6166:          continue
        !          6167:          ;;
        !          6168:        -l*)
        !          6169:          if test "$linkmode" != lib && test "$linkmode" != prog; then
        !          6170:            func_warning "\`-l' is ignored for archives/objects"
        !          6171:            continue
        !          6172:          fi
        !          6173:          func_stripname '-l' '' "$deplib"
        !          6174:          name=$func_stripname_result
        !          6175:          if test "$linkmode" = lib; then
        !          6176:            searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
        !          6177:          else
        !          6178:            searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
        !          6179:          fi
        !          6180:          for searchdir in $searchdirs; do
        !          6181:            for search_ext in .la $std_shrext .so .a; do
        !          6182:              # Search the libtool library
        !          6183:              lib="$searchdir/lib${name}${search_ext}"
        !          6184:              if test -f "$lib"; then
        !          6185:                if test "$search_ext" = ".la"; then
        !          6186:                  found=yes
        !          6187:                else
        !          6188:                  found=no
        !          6189:                fi
        !          6190:                break 2
        !          6191:              fi
        !          6192:            done
        !          6193:          done
        !          6194:          if test "$found" != yes; then
        !          6195:            # deplib doesn't seem to be a libtool library
        !          6196:            if test "$linkmode,$pass" = "prog,link"; then
        !          6197:              compile_deplibs="$deplib $compile_deplibs"
        !          6198:              finalize_deplibs="$deplib $finalize_deplibs"
1.1       misho    6199:            else
1.1.1.2 ! misho    6200:              deplibs="$deplib $deplibs"
        !          6201:              test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
1.1       misho    6202:            fi
1.1.1.2 ! misho    6203:            continue
        !          6204:          else # deplib is a libtool library
        !          6205:            # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
        !          6206:            # We need to do some special things here, and not later.
        !          6207:            if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          6208:              case " $predeps $postdeps " in
        !          6209:              *" $deplib "*)
        !          6210:                if func_lalib_p "$lib"; then
        !          6211:                  library_names=
        !          6212:                  old_library=
        !          6213:                  func_source "$lib"
        !          6214:                  for l in $old_library $library_names; do
        !          6215:                    ll="$l"
        !          6216:                  done
        !          6217:                  if test "X$ll" = "X$old_library" ; then # only static version available
        !          6218:                    found=no
        !          6219:                    func_dirname "$lib" "" "."
        !          6220:                    ladir="$func_dirname_result"
        !          6221:                    lib=$ladir/$old_library
        !          6222:                    if test "$linkmode,$pass" = "prog,link"; then
        !          6223:                      compile_deplibs="$deplib $compile_deplibs"
        !          6224:                      finalize_deplibs="$deplib $finalize_deplibs"
        !          6225:                    else
        !          6226:                      deplibs="$deplib $deplibs"
        !          6227:                      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
        !          6228:                    fi
        !          6229:                    continue
        !          6230:                  fi
        !          6231:                fi
        !          6232:                ;;
        !          6233:              *) ;;
        !          6234:              esac
        !          6235:            fi
        !          6236:          fi
        !          6237:          ;; # -l
        !          6238:        *.ltframework)
        !          6239:          if test "$linkmode,$pass" = "prog,link"; then
        !          6240:            compile_deplibs="$deplib $compile_deplibs"
        !          6241:            finalize_deplibs="$deplib $finalize_deplibs"
1.1       misho    6242:          else
1.1.1.2 ! misho    6243:            deplibs="$deplib $deplibs"
        !          6244:            if test "$linkmode" = lib ; then
        !          6245:                case "$new_inherited_linker_flags " in
        !          6246:                    *" $deplib "*) ;;
        !          6247:                    * ) func_append new_inherited_linker_flags " $deplib" ;;
        !          6248:                esac
1.1       misho    6249:            fi
                   6250:          fi
1.1.1.2 ! misho    6251:          continue
        !          6252:          ;;
        !          6253:        -L*)
        !          6254:          case $linkmode in
        !          6255:          lib)
        !          6256:            deplibs="$deplib $deplibs"
        !          6257:            test "$pass" = conv && continue
        !          6258:            newdependency_libs="$deplib $newdependency_libs"
        !          6259:            func_stripname '-L' '' "$deplib"
        !          6260:            func_resolve_sysroot "$func_stripname_result"
        !          6261:            func_append newlib_search_path " $func_resolve_sysroot_result"
        !          6262:            ;;
        !          6263:          prog)
        !          6264:            if test "$pass" = conv; then
        !          6265:              deplibs="$deplib $deplibs"
        !          6266:              continue
1.1       misho    6267:            fi
1.1.1.2 ! misho    6268:            if test "$pass" = scan; then
        !          6269:              deplibs="$deplib $deplibs"
        !          6270:            else
        !          6271:              compile_deplibs="$deplib $compile_deplibs"
        !          6272:              finalize_deplibs="$deplib $finalize_deplibs"
1.1       misho    6273:            fi
1.1.1.2 ! misho    6274:            func_stripname '-L' '' "$deplib"
        !          6275:            func_resolve_sysroot "$func_stripname_result"
        !          6276:            func_append newlib_search_path " $func_resolve_sysroot_result"
        !          6277:            ;;
        !          6278:          *)
        !          6279:            func_warning "\`-L' is ignored for archives/objects"
        !          6280:            ;;
        !          6281:          esac # linkmode
        !          6282:          continue
        !          6283:          ;; # -L
        !          6284:        -R*)
        !          6285:          if test "$pass" = link; then
        !          6286:            func_stripname '-R' '' "$deplib"
        !          6287:            func_resolve_sysroot "$func_stripname_result"
        !          6288:            dir=$func_resolve_sysroot_result
        !          6289:            # Make sure the xrpath contains only unique directories.
        !          6290:            case "$xrpath " in
        !          6291:            *" $dir "*) ;;
        !          6292:            *) func_append xrpath " $dir" ;;
        !          6293:            esac
1.1       misho    6294:          fi
1.1.1.2 ! misho    6295:          deplibs="$deplib $deplibs"
        !          6296:          continue
        !          6297:          ;;
        !          6298:        *.la)
        !          6299:          func_resolve_sysroot "$deplib"
        !          6300:          lib=$func_resolve_sysroot_result
        !          6301:          ;;
        !          6302:        *.$libext)
        !          6303:          if test "$pass" = conv; then
        !          6304:            deplibs="$deplib $deplibs"
        !          6305:            continue
1.1       misho    6306:          fi
1.1.1.2 ! misho    6307:          case $linkmode in
        !          6308:          lib)
        !          6309:            # Linking convenience modules into shared libraries is allowed,
        !          6310:            # but linking other static libraries is non-portable.
        !          6311:            case " $dlpreconveniencelibs " in
        !          6312:            *" $deplib "*) ;;
        !          6313:            *)
        !          6314:              valid_a_lib=no
        !          6315:              case $deplibs_check_method in
        !          6316:                match_pattern*)
        !          6317:                  set dummy $deplibs_check_method; shift
        !          6318:                  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
        !          6319:                  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
        !          6320:                    | $EGREP "$match_pattern_regex" > /dev/null; then
        !          6321:                    valid_a_lib=yes
        !          6322:                  fi
        !          6323:                ;;
        !          6324:                pass_all)
        !          6325:                  valid_a_lib=yes
        !          6326:                ;;
        !          6327:              esac
        !          6328:              if test "$valid_a_lib" != yes; then
        !          6329:                echo
        !          6330:                $ECHO "*** Warning: Trying to link with static lib archive $deplib."
        !          6331:                echo "*** I have the capability to make that library automatically link in when"
        !          6332:                echo "*** you link to this library.  But I can only do this if you have a"
        !          6333:                echo "*** shared version of the library, which you do not appear to have"
        !          6334:                echo "*** because the file extensions .$libext of this argument makes me believe"
        !          6335:                echo "*** that it is just a static archive that I should not use here."
        !          6336:              else
        !          6337:                echo
        !          6338:                $ECHO "*** Warning: Linking the shared library $output against the"
        !          6339:                $ECHO "*** static library $deplib is not portable!"
        !          6340:                deplibs="$deplib $deplibs"
        !          6341:              fi
        !          6342:              ;;
        !          6343:            esac
        !          6344:            continue
        !          6345:            ;;
        !          6346:          prog)
        !          6347:            if test "$pass" != link; then
        !          6348:              deplibs="$deplib $deplibs"
        !          6349:            else
        !          6350:              compile_deplibs="$deplib $compile_deplibs"
        !          6351:              finalize_deplibs="$deplib $finalize_deplibs"
        !          6352:            fi
        !          6353:            continue
        !          6354:            ;;
        !          6355:          esac # linkmode
        !          6356:          ;; # *.$libext
        !          6357:        *.lo | *.$objext)
        !          6358:          if test "$pass" = conv; then
        !          6359:            deplibs="$deplib $deplibs"
        !          6360:          elif test "$linkmode" = prog; then
        !          6361:            if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
        !          6362:              # If there is no dlopen support or we're linking statically,
        !          6363:              # we need to preload.
        !          6364:              func_append newdlprefiles " $deplib"
        !          6365:              compile_deplibs="$deplib $compile_deplibs"
        !          6366:              finalize_deplibs="$deplib $finalize_deplibs"
        !          6367:            else
        !          6368:              func_append newdlfiles " $deplib"
        !          6369:            fi
        !          6370:          fi
        !          6371:          continue
        !          6372:          ;;
        !          6373:        %DEPLIBS%)
        !          6374:          alldeplibs=yes
        !          6375:          continue
        !          6376:          ;;
        !          6377:        esac # case $deplib
1.1       misho    6378: 
1.1.1.2 ! misho    6379:        if test "$found" = yes || test -f "$lib"; then :
1.1       misho    6380:        else
1.1.1.2 ! misho    6381:          func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
1.1       misho    6382:        fi
                   6383: 
1.1.1.2 ! misho    6384:        # Check to see that this really is a libtool archive.
        !          6385:        func_lalib_unsafe_p "$lib" \
        !          6386:          || func_fatal_error "\`$lib' is not a valid libtool archive"
1.1       misho    6387: 
1.1.1.2 ! misho    6388:        func_dirname "$lib" "" "."
        !          6389:        ladir="$func_dirname_result"
1.1       misho    6390: 
1.1.1.2 ! misho    6391:        dlname=
        !          6392:        dlopen=
        !          6393:        dlpreopen=
        !          6394:        libdir=
        !          6395:        library_names=
        !          6396:        old_library=
        !          6397:        inherited_linker_flags=
        !          6398:        # If the library was installed with an old release of libtool,
        !          6399:        # it will not redefine variables installed, or shouldnotlink
        !          6400:        installed=yes
        !          6401:        shouldnotlink=no
        !          6402:        avoidtemprpath=
1.1       misho    6403: 
                   6404: 
1.1.1.2 ! misho    6405:        # Read the .la file
        !          6406:        func_source "$lib"
        !          6407: 
        !          6408:        # Convert "-framework foo" to "foo.ltframework"
        !          6409:        if test -n "$inherited_linker_flags"; then
        !          6410:          tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
        !          6411:          for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
        !          6412:            case " $new_inherited_linker_flags " in
        !          6413:              *" $tmp_inherited_linker_flag "*) ;;
        !          6414:              *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
        !          6415:            esac
        !          6416:          done
        !          6417:        fi
        !          6418:        dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          6419:        if test "$linkmode,$pass" = "lib,link" ||
        !          6420:           test "$linkmode,$pass" = "prog,scan" ||
        !          6421:           { test "$linkmode" != prog && test "$linkmode" != lib; }; then
        !          6422:          test -n "$dlopen" && func_append dlfiles " $dlopen"
        !          6423:          test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
1.1       misho    6424:        fi
                   6425: 
1.1.1.2 ! misho    6426:        if test "$pass" = conv; then
        !          6427:          # Only check for convenience libraries
        !          6428:          deplibs="$lib $deplibs"
        !          6429:          if test -z "$libdir"; then
        !          6430:            if test -z "$old_library"; then
        !          6431:              func_fatal_error "cannot find name of link library for \`$lib'"
        !          6432:            fi
        !          6433:            # It is a libtool convenience library, so add in its objects.
        !          6434:            func_append convenience " $ladir/$objdir/$old_library"
        !          6435:            func_append old_convenience " $ladir/$objdir/$old_library"
        !          6436:            tmp_libs=
        !          6437:            for deplib in $dependency_libs; do
        !          6438:              deplibs="$deplib $deplibs"
        !          6439:              if $opt_preserve_dup_deps ; then
        !          6440:                case "$tmp_libs " in
        !          6441:                *" $deplib "*) func_append specialdeplibs " $deplib" ;;
        !          6442:                esac
        !          6443:              fi
        !          6444:              func_append tmp_libs " $deplib"
        !          6445:            done
        !          6446:          elif test "$linkmode" != prog && test "$linkmode" != lib; then
        !          6447:            func_fatal_error "\`$lib' is not a convenience library"
        !          6448:          fi
        !          6449:          continue
        !          6450:        fi # $pass = conv
1.1       misho    6451: 
                   6452: 
1.1.1.2 ! misho    6453:        # Get the name of the library we link against.
        !          6454:        linklib=
        !          6455:        if test -n "$old_library" &&
        !          6456:           { test "$prefer_static_libs" = yes ||
        !          6457:             test "$prefer_static_libs,$installed" = "built,no"; }; then
        !          6458:          linklib=$old_library
        !          6459:        else
        !          6460:          for l in $old_library $library_names; do
        !          6461:            linklib="$l"
        !          6462:          done
        !          6463:        fi
        !          6464:        if test -z "$linklib"; then
        !          6465:          func_fatal_error "cannot find name of link library for \`$lib'"
        !          6466:        fi
1.1       misho    6467: 
1.1.1.2 ! misho    6468:        # This library was specified with -dlopen.
        !          6469:        if test "$pass" = dlopen; then
        !          6470:          if test -z "$libdir"; then
        !          6471:            func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
        !          6472:          fi
        !          6473:          if test -z "$dlname" ||
        !          6474:             test "$dlopen_support" != yes ||
        !          6475:             test "$build_libtool_libs" = no; then
        !          6476:            # If there is no dlname, no dlopen support or we're linking
        !          6477:            # statically, we need to preload.  We also need to preload any
        !          6478:            # dependent libraries so libltdl's deplib preloader doesn't
        !          6479:            # bomb out in the load deplibs phase.
        !          6480:            func_append dlprefiles " $lib $dependency_libs"
        !          6481:          else
        !          6482:            func_append newdlfiles " $lib"
        !          6483:          fi
        !          6484:          continue
        !          6485:        fi # $pass = dlopen
1.1       misho    6486: 
1.1.1.2 ! misho    6487:        # We need an absolute path.
        !          6488:        case $ladir in
        !          6489:        [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
        !          6490:        *)
        !          6491:          abs_ladir=`cd "$ladir" && pwd`
        !          6492:          if test -z "$abs_ladir"; then
        !          6493:            func_warning "cannot determine absolute directory name of \`$ladir'"
        !          6494:            func_warning "passing it literally to the linker, although it might fail"
        !          6495:            abs_ladir="$ladir"
        !          6496:          fi
        !          6497:          ;;
        !          6498:        esac
        !          6499:        func_basename "$lib"
        !          6500:        laname="$func_basename_result"
1.1       misho    6501: 
1.1.1.2 ! misho    6502:        # Find the relevant object directory and library name.
        !          6503:        if test "X$installed" = Xyes; then
        !          6504:          if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
        !          6505:            func_warning "library \`$lib' was moved."
        !          6506:            dir="$ladir"
        !          6507:            absdir="$abs_ladir"
        !          6508:            libdir="$abs_ladir"
        !          6509:          else
        !          6510:            dir="$lt_sysroot$libdir"
        !          6511:            absdir="$lt_sysroot$libdir"
        !          6512:          fi
        !          6513:          test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
        !          6514:        else
        !          6515:          if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
        !          6516:            dir="$ladir"
        !          6517:            absdir="$abs_ladir"
        !          6518:            # Remove this search path later
        !          6519:            func_append notinst_path " $abs_ladir"
        !          6520:          else
        !          6521:            dir="$ladir/$objdir"
        !          6522:            absdir="$abs_ladir/$objdir"
        !          6523:            # Remove this search path later
        !          6524:            func_append notinst_path " $abs_ladir"
        !          6525:          fi
        !          6526:        fi # $installed = yes
        !          6527:        func_stripname 'lib' '.la' "$laname"
        !          6528:        name=$func_stripname_result
        !          6529: 
        !          6530:        # This library was specified with -dlpreopen.
        !          6531:        if test "$pass" = dlpreopen; then
        !          6532:          if test -z "$libdir" && test "$linkmode" = prog; then
        !          6533:            func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
        !          6534:          fi
        !          6535:          case "$host" in
        !          6536:            # special handling for platforms with PE-DLLs.
        !          6537:            *cygwin* | *mingw* | *cegcc* )
        !          6538:              # Linker will automatically link against shared library if both
        !          6539:              # static and shared are present.  Therefore, ensure we extract
        !          6540:              # symbols from the import library if a shared library is present
        !          6541:              # (otherwise, the dlopen module name will be incorrect).  We do
        !          6542:              # this by putting the import library name into $newdlprefiles.
        !          6543:              # We recover the dlopen module name by 'saving' the la file
        !          6544:              # name in a special purpose variable, and (later) extracting the
        !          6545:              # dlname from the la file.
        !          6546:              if test -n "$dlname"; then
        !          6547:                func_tr_sh "$dir/$linklib"
        !          6548:                eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
        !          6549:                func_append newdlprefiles " $dir/$linklib"
        !          6550:              else
        !          6551:                func_append newdlprefiles " $dir/$old_library"
        !          6552:                # Keep a list of preopened convenience libraries to check
        !          6553:                # that they are being used correctly in the link pass.
        !          6554:                test -z "$libdir" && \
        !          6555:                  func_append dlpreconveniencelibs " $dir/$old_library"
        !          6556:              fi
        !          6557:            ;;
        !          6558:            * )
        !          6559:              # Prefer using a static library (so that no silly _DYNAMIC symbols
        !          6560:              # are required to link).
        !          6561:              if test -n "$old_library"; then
        !          6562:                func_append newdlprefiles " $dir/$old_library"
        !          6563:                # Keep a list of preopened convenience libraries to check
        !          6564:                # that they are being used correctly in the link pass.
        !          6565:                test -z "$libdir" && \
        !          6566:                  func_append dlpreconveniencelibs " $dir/$old_library"
        !          6567:              # Otherwise, use the dlname, so that lt_dlopen finds it.
        !          6568:              elif test -n "$dlname"; then
        !          6569:                func_append newdlprefiles " $dir/$dlname"
        !          6570:              else
        !          6571:                func_append newdlprefiles " $dir/$linklib"
        !          6572:              fi
        !          6573:            ;;
        !          6574:          esac
        !          6575:        fi # $pass = dlpreopen
1.1       misho    6576: 
1.1.1.2 ! misho    6577:        if test -z "$libdir"; then
        !          6578:          # Link the convenience library
        !          6579:          if test "$linkmode" = lib; then
        !          6580:            deplibs="$dir/$old_library $deplibs"
        !          6581:          elif test "$linkmode,$pass" = "prog,link"; then
        !          6582:            compile_deplibs="$dir/$old_library $compile_deplibs"
        !          6583:            finalize_deplibs="$dir/$old_library $finalize_deplibs"
        !          6584:          else
        !          6585:            deplibs="$lib $deplibs" # used for prog,scan pass
        !          6586:          fi
        !          6587:          continue
1.1       misho    6588:        fi
                   6589: 
                   6590: 
1.1.1.2 ! misho    6591:        if test "$linkmode" = prog && test "$pass" != link; then
        !          6592:          func_append newlib_search_path " $ladir"
        !          6593:          deplibs="$lib $deplibs"
1.1       misho    6594: 
1.1.1.2 ! misho    6595:          linkalldeplibs=no
        !          6596:          if test "$link_all_deplibs" != no || test -z "$library_names" ||
        !          6597:             test "$build_libtool_libs" = no; then
        !          6598:            linkalldeplibs=yes
        !          6599:          fi
1.1       misho    6600: 
1.1.1.2 ! misho    6601:          tmp_libs=
        !          6602:          for deplib in $dependency_libs; do
        !          6603:            case $deplib in
        !          6604:            -L*) func_stripname '-L' '' "$deplib"
        !          6605:                 func_resolve_sysroot "$func_stripname_result"
        !          6606:                 func_append newlib_search_path " $func_resolve_sysroot_result"
        !          6607:                 ;;
        !          6608:            esac
        !          6609:            # Need to link against all dependency_libs?
        !          6610:            if test "$linkalldeplibs" = yes; then
        !          6611:              deplibs="$deplib $deplibs"
        !          6612:            else
        !          6613:              # Need to hardcode shared library paths
        !          6614:              # or/and link against static libraries
        !          6615:              newdependency_libs="$deplib $newdependency_libs"
        !          6616:            fi
        !          6617:            if $opt_preserve_dup_deps ; then
        !          6618:              case "$tmp_libs " in
        !          6619:              *" $deplib "*) func_append specialdeplibs " $deplib" ;;
        !          6620:              esac
        !          6621:            fi
        !          6622:            func_append tmp_libs " $deplib"
        !          6623:          done # for deplib
        !          6624:          continue
        !          6625:        fi # $linkmode = prog...
        !          6626: 
        !          6627:        if test "$linkmode,$pass" = "prog,link"; then
        !          6628:          if test -n "$library_names" &&
        !          6629:             { { test "$prefer_static_libs" = no ||
        !          6630:                 test "$prefer_static_libs,$installed" = "built,yes"; } ||
        !          6631:               test -z "$old_library"; }; then
        !          6632:            # We need to hardcode the library path
        !          6633:            if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
        !          6634:              # Make sure the rpath contains only unique directories.
        !          6635:              case "$temp_rpath:" in
        !          6636:              *"$absdir:"*) ;;
        !          6637:              *) func_append temp_rpath "$absdir:" ;;
        !          6638:              esac
        !          6639:            fi
1.1       misho    6640: 
1.1.1.2 ! misho    6641:            # Hardcode the library path.
        !          6642:            # Skip directories that are in the system default run-time
        !          6643:            # search path.
        !          6644:            case " $sys_lib_dlsearch_path " in
        !          6645:            *" $absdir "*) ;;
        !          6646:            *)
        !          6647:              case "$compile_rpath " in
        !          6648:              *" $absdir "*) ;;
        !          6649:              *) func_append compile_rpath " $absdir" ;;
        !          6650:              esac
        !          6651:              ;;
        !          6652:            esac
        !          6653:            case " $sys_lib_dlsearch_path " in
        !          6654:            *" $libdir "*) ;;
        !          6655:            *)
        !          6656:              case "$finalize_rpath " in
        !          6657:              *" $libdir "*) ;;
        !          6658:              *) func_append finalize_rpath " $libdir" ;;
        !          6659:              esac
        !          6660:              ;;
        !          6661:            esac
        !          6662:          fi # $linkmode,$pass = prog,link...
1.1       misho    6663: 
1.1.1.2 ! misho    6664:          if test "$alldeplibs" = yes &&
        !          6665:             { test "$deplibs_check_method" = pass_all ||
        !          6666:               { test "$build_libtool_libs" = yes &&
        !          6667:                 test -n "$library_names"; }; }; then
        !          6668:            # We only need to search for static libraries
        !          6669:            continue
        !          6670:          fi
        !          6671:        fi
1.1       misho    6672: 
1.1.1.2 ! misho    6673:        link_static=no # Whether the deplib will be linked statically
        !          6674:        use_static_libs=$prefer_static_libs
        !          6675:        if test "$use_static_libs" = built && test "$installed" = yes; then
        !          6676:          use_static_libs=no
        !          6677:        fi
        !          6678:        if test -n "$library_names" &&
        !          6679:           { test "$use_static_libs" = no || test -z "$old_library"; }; then
        !          6680:          case $host in
        !          6681:          *cygwin* | *mingw* | *cegcc*)
        !          6682:              # No point in relinking DLLs because paths are not encoded
        !          6683:              func_append notinst_deplibs " $lib"
        !          6684:              need_relink=no
        !          6685:            ;;
        !          6686:          *)
        !          6687:            if test "$installed" = no; then
        !          6688:              func_append notinst_deplibs " $lib"
        !          6689:              need_relink=yes
        !          6690:            fi
        !          6691:            ;;
1.1       misho    6692:          esac
1.1.1.2 ! misho    6693:          # This is a shared library
1.1       misho    6694: 
1.1.1.2 ! misho    6695:          # Warn about portability, can't link against -module's on some
        !          6696:          # systems (darwin).  Don't bleat about dlopened modules though!
        !          6697:          dlopenmodule=""
        !          6698:          for dlpremoduletest in $dlprefiles; do
        !          6699:            if test "X$dlpremoduletest" = "X$lib"; then
        !          6700:              dlopenmodule="$dlpremoduletest"
        !          6701:              break
        !          6702:            fi
        !          6703:          done
        !          6704:          if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
        !          6705:            echo
        !          6706:            if test "$linkmode" = prog; then
        !          6707:              $ECHO "*** Warning: Linking the executable $output against the loadable module"
1.1       misho    6708:            else
1.1.1.2 ! misho    6709:              $ECHO "*** Warning: Linking the shared library $output against the loadable module"
1.1       misho    6710:            fi
1.1.1.2 ! misho    6711:            $ECHO "*** $linklib is not portable!"
        !          6712:          fi
        !          6713:          if test "$linkmode" = lib &&
        !          6714:             test "$hardcode_into_libs" = yes; then
        !          6715:            # Hardcode the library path.
        !          6716:            # Skip directories that are in the system default run-time
        !          6717:            # search path.
        !          6718:            case " $sys_lib_dlsearch_path " in
        !          6719:            *" $absdir "*) ;;
        !          6720:            *)
        !          6721:              case "$compile_rpath " in
        !          6722:              *" $absdir "*) ;;
        !          6723:              *) func_append compile_rpath " $absdir" ;;
        !          6724:              esac
        !          6725:              ;;
        !          6726:            esac
        !          6727:            case " $sys_lib_dlsearch_path " in
        !          6728:            *" $libdir "*) ;;
        !          6729:            *)
        !          6730:              case "$finalize_rpath " in
        !          6731:              *" $libdir "*) ;;
        !          6732:              *) func_append finalize_rpath " $libdir" ;;
        !          6733:              esac
        !          6734:              ;;
        !          6735:            esac
1.1       misho    6736:          fi
                   6737: 
1.1.1.2 ! misho    6738:          if test -n "$old_archive_from_expsyms_cmds"; then
        !          6739:            # figure out the soname
        !          6740:            set dummy $library_names
        !          6741:            shift
        !          6742:            realname="$1"
        !          6743:            shift
        !          6744:            libname=`eval "\\$ECHO \"$libname_spec\""`
        !          6745:            # use dlname if we got it. it's perfectly good, no?
        !          6746:            if test -n "$dlname"; then
        !          6747:              soname="$dlname"
        !          6748:            elif test -n "$soname_spec"; then
        !          6749:              # bleh windows
        !          6750:              case $host in
        !          6751:              *cygwin* | mingw* | *cegcc*)
        !          6752:                func_arith $current - $age
        !          6753:                major=$func_arith_result
        !          6754:                versuffix="-$major"
1.1       misho    6755:                ;;
                   6756:              esac
1.1.1.2 ! misho    6757:              eval soname=\"$soname_spec\"
        !          6758:            else
        !          6759:              soname="$realname"
1.1       misho    6760:            fi
                   6761: 
1.1.1.2 ! misho    6762:            # Make a new name for the extract_expsyms_cmds to use
        !          6763:            soroot="$soname"
        !          6764:            func_basename "$soroot"
        !          6765:            soname="$func_basename_result"
        !          6766:            func_stripname 'lib' '.dll' "$soname"
        !          6767:            newlib=libimp-$func_stripname_result.a
1.1       misho    6768: 
1.1.1.2 ! misho    6769:            # If the library has no export list, then create one now
        !          6770:            if test -f "$output_objdir/$soname-def"; then :
        !          6771:            else
        !          6772:              func_verbose "extracting exported symbol list from \`$soname'"
        !          6773:              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
        !          6774:            fi
1.1       misho    6775: 
1.1.1.2 ! misho    6776:            # Create $newlib
        !          6777:            if test -f "$output_objdir/$newlib"; then :; else
        !          6778:              func_verbose "generating import library for \`$soname'"
        !          6779:              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
        !          6780:            fi
        !          6781:            # make sure the library variables are pointing to the new library
        !          6782:            dir=$output_objdir
        !          6783:            linklib=$newlib
        !          6784:          fi # test -n "$old_archive_from_expsyms_cmds"
1.1       misho    6785: 
1.1.1.2 ! misho    6786:          if test "$linkmode" = prog || test "$opt_mode" != relink; then
        !          6787:            add_shlibpath=
        !          6788:            add_dir=
        !          6789:            add=
        !          6790:            lib_linked=yes
        !          6791:            case $hardcode_action in
        !          6792:            immediate | unsupported)
        !          6793:              if test "$hardcode_direct" = no; then
        !          6794:                add="$dir/$linklib"
        !          6795:                case $host in
        !          6796:                  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
        !          6797:                  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
        !          6798:                  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
        !          6799:                    *-*-unixware7*) add_dir="-L$dir" ;;
        !          6800:                  *-*-darwin* )
        !          6801:                    # if the lib is a (non-dlopened) module then we can not
        !          6802:                    # link against it, someone is ignoring the earlier warnings
        !          6803:                    if /usr/bin/file -L $add 2> /dev/null |
        !          6804:                         $GREP ": [^:]* bundle" >/dev/null ; then
        !          6805:                      if test "X$dlopenmodule" != "X$lib"; then
        !          6806:                        $ECHO "*** Warning: lib $linklib is a module, not a shared library"
        !          6807:                        if test -z "$old_library" ; then
        !          6808:                          echo
        !          6809:                          echo "*** And there doesn't seem to be a static archive available"
        !          6810:                          echo "*** The link will probably fail, sorry"
        !          6811:                        else
        !          6812:                          add="$dir/$old_library"
        !          6813:                        fi
        !          6814:                      elif test -n "$old_library"; then
        !          6815:                        add="$dir/$old_library"
        !          6816:                      fi
        !          6817:                    fi
        !          6818:                esac
        !          6819:              elif test "$hardcode_minus_L" = no; then
        !          6820:                case $host in
        !          6821:                *-*-sunos*) add_shlibpath="$dir" ;;
        !          6822:                esac
        !          6823:                add_dir="-L$dir"
        !          6824:                add="-l$name"
        !          6825:              elif test "$hardcode_shlibpath_var" = no; then
        !          6826:                add_shlibpath="$dir"
        !          6827:                add="-l$name"
        !          6828:              else
        !          6829:                lib_linked=no
        !          6830:              fi
        !          6831:              ;;
        !          6832:            relink)
        !          6833:              if test "$hardcode_direct" = yes &&
        !          6834:                 test "$hardcode_direct_absolute" = no; then
        !          6835:                add="$dir/$linklib"
        !          6836:              elif test "$hardcode_minus_L" = yes; then
        !          6837:                add_dir="-L$dir"
        !          6838:                # Try looking first in the location we're being installed to.
        !          6839:                if test -n "$inst_prefix_dir"; then
        !          6840:                  case $libdir in
        !          6841:                    [\\/]*)
        !          6842:                      func_append add_dir " -L$inst_prefix_dir$libdir"
        !          6843:                      ;;
        !          6844:                  esac
        !          6845:                fi
        !          6846:                add="-l$name"
        !          6847:              elif test "$hardcode_shlibpath_var" = yes; then
        !          6848:                add_shlibpath="$dir"
        !          6849:                add="-l$name"
        !          6850:              else
        !          6851:                lib_linked=no
        !          6852:              fi
        !          6853:              ;;
        !          6854:            *) lib_linked=no ;;
        !          6855:            esac
1.1       misho    6856: 
1.1.1.2 ! misho    6857:            if test "$lib_linked" != yes; then
        !          6858:              func_fatal_configuration "unsupported hardcode properties"
        !          6859:            fi
1.1       misho    6860: 
1.1.1.2 ! misho    6861:            if test -n "$add_shlibpath"; then
        !          6862:              case :$compile_shlibpath: in
        !          6863:              *":$add_shlibpath:"*) ;;
        !          6864:              *) func_append compile_shlibpath "$add_shlibpath:" ;;
        !          6865:              esac
        !          6866:            fi
        !          6867:            if test "$linkmode" = prog; then
        !          6868:              test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
        !          6869:              test -n "$add" && compile_deplibs="$add $compile_deplibs"
1.1       misho    6870:            else
1.1.1.2 ! misho    6871:              test -n "$add_dir" && deplibs="$add_dir $deplibs"
        !          6872:              test -n "$add" && deplibs="$add $deplibs"
        !          6873:              if test "$hardcode_direct" != yes &&
        !          6874:                 test "$hardcode_minus_L" != yes &&
        !          6875:                 test "$hardcode_shlibpath_var" = yes; then
        !          6876:                case :$finalize_shlibpath: in
        !          6877:                *":$libdir:"*) ;;
        !          6878:                *) func_append finalize_shlibpath "$libdir:" ;;
        !          6879:                esac
        !          6880:              fi
1.1       misho    6881:            fi
                   6882:          fi
                   6883: 
1.1.1.2 ! misho    6884:          if test "$linkmode" = prog || test "$opt_mode" = relink; then
        !          6885:            add_shlibpath=
        !          6886:            add_dir=
        !          6887:            add=
        !          6888:            # Finalize command for both is simple: just hardcode it.
        !          6889:            if test "$hardcode_direct" = yes &&
        !          6890:               test "$hardcode_direct_absolute" = no; then
        !          6891:              add="$libdir/$linklib"
        !          6892:            elif test "$hardcode_minus_L" = yes; then
        !          6893:              add_dir="-L$libdir"
        !          6894:              add="-l$name"
        !          6895:            elif test "$hardcode_shlibpath_var" = yes; then
        !          6896:              case :$finalize_shlibpath: in
        !          6897:              *":$libdir:"*) ;;
        !          6898:              *) func_append finalize_shlibpath "$libdir:" ;;
        !          6899:              esac
        !          6900:              add="-l$name"
        !          6901:            elif test "$hardcode_automatic" = yes; then
        !          6902:              if test -n "$inst_prefix_dir" &&
        !          6903:                 test -f "$inst_prefix_dir$libdir/$linklib" ; then
        !          6904:                add="$inst_prefix_dir$libdir/$linklib"
        !          6905:              else
        !          6906:                add="$libdir/$linklib"
        !          6907:              fi
        !          6908:            else
        !          6909:              # We cannot seem to hardcode it, guess we'll fake it.
        !          6910:              add_dir="-L$libdir"
        !          6911:              # Try looking first in the location we're being installed to.
        !          6912:              if test -n "$inst_prefix_dir"; then
        !          6913:                case $libdir in
        !          6914:                  [\\/]*)
        !          6915:                    func_append add_dir " -L$inst_prefix_dir$libdir"
        !          6916:                    ;;
        !          6917:                esac
        !          6918:              fi
        !          6919:              add="-l$name"
1.1       misho    6920:            fi
                   6921: 
1.1.1.2 ! misho    6922:            if test "$linkmode" = prog; then
        !          6923:              test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
        !          6924:              test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
1.1       misho    6925:            else
1.1.1.2 ! misho    6926:              test -n "$add_dir" && deplibs="$add_dir $deplibs"
        !          6927:              test -n "$add" && deplibs="$add $deplibs"
1.1       misho    6928:            fi
1.1.1.2 ! misho    6929:          fi
        !          6930:        elif test "$linkmode" = prog; then
        !          6931:          # Here we assume that one of hardcode_direct or hardcode_minus_L
        !          6932:          # is not unsupported.  This is valid on all known static and
        !          6933:          # shared platforms.
        !          6934:          if test "$hardcode_direct" != unsupported; then
        !          6935:            test -n "$old_library" && linklib="$old_library"
        !          6936:            compile_deplibs="$dir/$linklib $compile_deplibs"
        !          6937:            finalize_deplibs="$dir/$linklib $finalize_deplibs"
        !          6938:          else
        !          6939:            compile_deplibs="-l$name -L$dir $compile_deplibs"
        !          6940:            finalize_deplibs="-l$name -L$dir $finalize_deplibs"
        !          6941:          fi
        !          6942:        elif test "$build_libtool_libs" = yes; then
        !          6943:          # Not a shared library
        !          6944:          if test "$deplibs_check_method" != pass_all; then
        !          6945:            # We're trying link a shared library against a static one
        !          6946:            # but the system doesn't support it.
1.1       misho    6947: 
1.1.1.2 ! misho    6948:            # Just print a warning and add the library to dependency_libs so
        !          6949:            # that the program can be linked against the static library.
        !          6950:            echo
        !          6951:            $ECHO "*** Warning: This system can not link to static lib archive $lib."
        !          6952:            echo "*** I have the capability to make that library automatically link in when"
        !          6953:            echo "*** you link to this library.  But I can only do this if you have a"
        !          6954:            echo "*** shared version of the library, which you do not appear to have."
        !          6955:            if test "$module" = yes; then
        !          6956:              echo "*** But as you try to build a module library, libtool will still create "
        !          6957:              echo "*** a static module, that should work as long as the dlopening application"
        !          6958:              echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
        !          6959:              if test -z "$global_symbol_pipe"; then
        !          6960:                echo
        !          6961:                echo "*** However, this would only work if libtool was able to extract symbol"
        !          6962:                echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
        !          6963:                echo "*** not find such a program.  So, this module is probably useless."
        !          6964:                echo "*** \`nm' from GNU binutils and a full rebuild may help."
        !          6965:              fi
        !          6966:              if test "$build_old_libs" = no; then
        !          6967:                build_libtool_libs=module
        !          6968:                build_old_libs=yes
        !          6969:              else
        !          6970:                build_libtool_libs=no
        !          6971:              fi
1.1       misho    6972:            fi
1.1.1.2 ! misho    6973:          else
        !          6974:            deplibs="$dir/$old_library $deplibs"
        !          6975:            link_static=yes
1.1       misho    6976:          fi
1.1.1.2 ! misho    6977:        fi # link shared/static library?
1.1       misho    6978: 
1.1.1.2 ! misho    6979:        if test "$linkmode" = lib; then
        !          6980:          if test -n "$dependency_libs" &&
        !          6981:             { test "$hardcode_into_libs" != yes ||
        !          6982:               test "$build_old_libs" = yes ||
        !          6983:               test "$link_static" = yes; }; then
        !          6984:            # Extract -R from dependency_libs
        !          6985:            temp_deplibs=
        !          6986:            for libdir in $dependency_libs; do
        !          6987:              case $libdir in
        !          6988:              -R*) func_stripname '-R' '' "$libdir"
        !          6989:                   temp_xrpath=$func_stripname_result
        !          6990:                   case " $xrpath " in
        !          6991:                   *" $temp_xrpath "*) ;;
        !          6992:                   *) func_append xrpath " $temp_xrpath";;
        !          6993:                   esac;;
        !          6994:              *) func_append temp_deplibs " $libdir";;
        !          6995:              esac
        !          6996:            done
        !          6997:            dependency_libs="$temp_deplibs"
        !          6998:          fi
1.1       misho    6999: 
1.1.1.2 ! misho    7000:          func_append newlib_search_path " $absdir"
        !          7001:          # Link against this library
        !          7002:          test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
        !          7003:          # ... and its dependency_libs
        !          7004:          tmp_libs=
        !          7005:          for deplib in $dependency_libs; do
        !          7006:            newdependency_libs="$deplib $newdependency_libs"
        !          7007:            case $deplib in
        !          7008:               -L*) func_stripname '-L' '' "$deplib"
        !          7009:                    func_resolve_sysroot "$func_stripname_result";;
        !          7010:               *) func_resolve_sysroot "$deplib" ;;
        !          7011:             esac
        !          7012:            if $opt_preserve_dup_deps ; then
        !          7013:              case "$tmp_libs " in
        !          7014:              *" $func_resolve_sysroot_result "*)
        !          7015:                 func_append specialdeplibs " $func_resolve_sysroot_result" ;;
        !          7016:              esac
        !          7017:            fi
        !          7018:            func_append tmp_libs " $func_resolve_sysroot_result"
1.1       misho    7019:          done
                   7020: 
1.1.1.2 ! misho    7021:          if test "$link_all_deplibs" != no; then
        !          7022:            # Add the search paths of all dependency libraries
        !          7023:            for deplib in $dependency_libs; do
        !          7024:              path=
        !          7025:              case $deplib in
        !          7026:              -L*) path="$deplib" ;;
        !          7027:              *.la)
        !          7028:                func_resolve_sysroot "$deplib"
        !          7029:                deplib=$func_resolve_sysroot_result
        !          7030:                func_dirname "$deplib" "" "."
        !          7031:                dir=$func_dirname_result
        !          7032:                # We need an absolute path.
        !          7033:                case $dir in
        !          7034:                [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
        !          7035:                *)
        !          7036:                  absdir=`cd "$dir" && pwd`
        !          7037:                  if test -z "$absdir"; then
        !          7038:                    func_warning "cannot determine absolute directory name of \`$dir'"
        !          7039:                    absdir="$dir"
        !          7040:                  fi
        !          7041:                  ;;
        !          7042:                esac
        !          7043:                if $GREP "^installed=no" $deplib > /dev/null; then
        !          7044:                case $host in
        !          7045:                *-*-darwin*)
        !          7046:                  depdepl=
        !          7047:                  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
        !          7048:                  if test -n "$deplibrary_names" ; then
        !          7049:                    for tmp in $deplibrary_names ; do
        !          7050:                      depdepl=$tmp
        !          7051:                    done
        !          7052:                    if test -f "$absdir/$objdir/$depdepl" ; then
        !          7053:                      depdepl="$absdir/$objdir/$depdepl"
        !          7054:                      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
        !          7055:                       if test -z "$darwin_install_name"; then
        !          7056:                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
        !          7057:                       fi
        !          7058:                      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
        !          7059:                      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
        !          7060:                      path=
        !          7061:                    fi
        !          7062:                  fi
        !          7063:                  ;;
        !          7064:                *)
        !          7065:                  path="-L$absdir/$objdir"
        !          7066:                  ;;
        !          7067:                esac
        !          7068:                else
        !          7069:                  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
        !          7070:                  test -z "$libdir" && \
        !          7071:                    func_fatal_error "\`$deplib' is not a valid libtool archive"
        !          7072:                  test "$absdir" != "$libdir" && \
        !          7073:                    func_warning "\`$deplib' seems to be moved"
1.1       misho    7074: 
1.1.1.2 ! misho    7075:                  path="-L$absdir"
        !          7076:                fi
        !          7077:                ;;
        !          7078:              esac
        !          7079:              case " $deplibs " in
        !          7080:              *" $path "*) ;;
        !          7081:              *) deplibs="$path $deplibs" ;;
        !          7082:              esac
        !          7083:            done
        !          7084:          fi # link_all_deplibs != no
        !          7085:        fi # linkmode = lib
        !          7086:       done # for deplib in $libs
        !          7087:       if test "$pass" = link; then
        !          7088:        if test "$linkmode" = "prog"; then
        !          7089:          compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
        !          7090:          finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
1.1       misho    7091:        else
1.1.1.2 ! misho    7092:          compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
1.1       misho    7093:        fi
                   7094:       fi
1.1.1.2 ! misho    7095:       dependency_libs="$newdependency_libs"
        !          7096:       if test "$pass" = dlpreopen; then
        !          7097:        # Link the dlpreopened libraries before other libraries
        !          7098:        for deplib in $save_deplibs; do
        !          7099:          deplibs="$deplib $deplibs"
1.1       misho    7100:        done
                   7101:       fi
1.1.1.2 ! misho    7102:       if test "$pass" != dlopen; then
        !          7103:        if test "$pass" != conv; then
        !          7104:          # Make sure lib_search_path contains only unique directories.
        !          7105:          lib_search_path=
        !          7106:          for dir in $newlib_search_path; do
        !          7107:            case "$lib_search_path " in
        !          7108:            *" $dir "*) ;;
        !          7109:            *) func_append lib_search_path " $dir" ;;
        !          7110:            esac
        !          7111:          done
        !          7112:          newlib_search_path=
        !          7113:        fi
1.1       misho    7114: 
1.1.1.2 ! misho    7115:        if test "$linkmode,$pass" != "prog,link"; then
        !          7116:          vars="deplibs"
        !          7117:        else
        !          7118:          vars="compile_deplibs finalize_deplibs"
        !          7119:        fi
        !          7120:        for var in $vars dependency_libs; do
        !          7121:          # Add libraries to $var in reverse order
        !          7122:          eval tmp_libs=\"\$$var\"
        !          7123:          new_libs=
        !          7124:          for deplib in $tmp_libs; do
        !          7125:            # FIXME: Pedantically, this is the right thing to do, so
        !          7126:            #        that some nasty dependency loop isn't accidentally
        !          7127:            #        broken:
        !          7128:            #new_libs="$deplib $new_libs"
        !          7129:            # Pragmatically, this seems to cause very few problems in
        !          7130:            # practice:
        !          7131:            case $deplib in
        !          7132:            -L*) new_libs="$deplib $new_libs" ;;
        !          7133:            -R*) ;;
        !          7134:            *)
        !          7135:              # And here is the reason: when a library appears more
        !          7136:              # than once as an explicit dependence of a library, or
        !          7137:              # is implicitly linked in more than once by the
        !          7138:              # compiler, it is considered special, and multiple
        !          7139:              # occurrences thereof are not removed.  Compare this
        !          7140:              # with having the same library being listed as a
        !          7141:              # dependency of multiple other libraries: in this case,
        !          7142:              # we know (pedantically, we assume) the library does not
        !          7143:              # need to be listed more than once, so we keep only the
        !          7144:              # last copy.  This is not always right, but it is rare
        !          7145:              # enough that we require users that really mean to play
        !          7146:              # such unportable linking tricks to link the library
        !          7147:              # using -Wl,-lname, so that libtool does not consider it
        !          7148:              # for duplicate removal.
        !          7149:              case " $specialdeplibs " in
        !          7150:              *" $deplib "*) new_libs="$deplib $new_libs" ;;
        !          7151:              *)
        !          7152:                case " $new_libs " in
        !          7153:                *" $deplib "*) ;;
        !          7154:                *) new_libs="$deplib $new_libs" ;;
        !          7155:                esac
        !          7156:                ;;
        !          7157:              esac
        !          7158:              ;;
        !          7159:            esac
        !          7160:          done
        !          7161:          tmp_libs=
        !          7162:          for deplib in $new_libs; do
        !          7163:            case $deplib in
        !          7164:            -L*)
        !          7165:              case " $tmp_libs " in
        !          7166:              *" $deplib "*) ;;
        !          7167:              *) func_append tmp_libs " $deplib" ;;
        !          7168:              esac
        !          7169:              ;;
        !          7170:            *) func_append tmp_libs " $deplib" ;;
        !          7171:            esac
        !          7172:          done
        !          7173:          eval $var=\"$tmp_libs\"
        !          7174:        done # for var
1.1       misho    7175:       fi
1.1.1.2 ! misho    7176:       # Last step: remove runtime libs from dependency_libs
        !          7177:       # (they stay in deplibs)
        !          7178:       tmp_libs=
        !          7179:       for i in $dependency_libs ; do
        !          7180:        case " $predeps $postdeps $compiler_lib_search_path " in
        !          7181:        *" $i "*)
        !          7182:          i=""
        !          7183:          ;;
1.1       misho    7184:        esac
1.1.1.2 ! misho    7185:        if test -n "$i" ; then
        !          7186:          func_append tmp_libs " $i"
        !          7187:        fi
        !          7188:       done
        !          7189:       dependency_libs=$tmp_libs
        !          7190:     done # for pass
        !          7191:     if test "$linkmode" = prog; then
        !          7192:       dlfiles="$newdlfiles"
        !          7193:     fi
        !          7194:     if test "$linkmode" = prog || test "$linkmode" = lib; then
        !          7195:       dlprefiles="$newdlprefiles"
        !          7196:     fi
1.1       misho    7197: 
1.1.1.2 ! misho    7198:     case $linkmode in
        !          7199:     oldlib)
        !          7200:       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        !          7201:        func_warning "\`-dlopen' is ignored for archives"
        !          7202:       fi
1.1       misho    7203: 
1.1.1.2 ! misho    7204:       case " $deplibs" in
        !          7205:       *\ -l* | *\ -L*)
        !          7206:        func_warning "\`-l' and \`-L' are ignored for archives" ;;
        !          7207:       esac
1.1       misho    7208: 
1.1.1.2 ! misho    7209:       test -n "$rpath" && \
        !          7210:        func_warning "\`-rpath' is ignored for archives"
1.1       misho    7211: 
1.1.1.2 ! misho    7212:       test -n "$xrpath" && \
        !          7213:        func_warning "\`-R' is ignored for archives"
1.1       misho    7214: 
1.1.1.2 ! misho    7215:       test -n "$vinfo" && \
        !          7216:        func_warning "\`-version-info/-version-number' is ignored for archives"
1.1       misho    7217: 
1.1.1.2 ! misho    7218:       test -n "$release" && \
        !          7219:        func_warning "\`-release' is ignored for archives"
1.1       misho    7220: 
1.1.1.2 ! misho    7221:       test -n "$export_symbols$export_symbols_regex" && \
        !          7222:        func_warning "\`-export-symbols' is ignored for archives"
1.1       misho    7223: 
1.1.1.2 ! misho    7224:       # Now set the variables for building old libraries.
        !          7225:       build_libtool_libs=no
        !          7226:       oldlibs="$output"
        !          7227:       func_append objs "$old_deplibs"
        !          7228:       ;;
1.1       misho    7229: 
1.1.1.2 ! misho    7230:     lib)
        !          7231:       # Make sure we only generate libraries of the form `libNAME.la'.
        !          7232:       case $outputname in
        !          7233:       lib*)
        !          7234:        func_stripname 'lib' '.la' "$outputname"
        !          7235:        name=$func_stripname_result
        !          7236:        eval shared_ext=\"$shrext_cmds\"
        !          7237:        eval libname=\"$libname_spec\"
        !          7238:        ;;
        !          7239:       *)
        !          7240:        test "$module" = no && \
        !          7241:          func_fatal_help "libtool library \`$output' must begin with \`lib'"
1.1       misho    7242: 
1.1.1.2 ! misho    7243:        if test "$need_lib_prefix" != no; then
        !          7244:          # Add the "lib" prefix for modules if required
        !          7245:          func_stripname '' '.la' "$outputname"
        !          7246:          name=$func_stripname_result
        !          7247:          eval shared_ext=\"$shrext_cmds\"
        !          7248:          eval libname=\"$libname_spec\"
        !          7249:        else
        !          7250:          func_stripname '' '.la' "$outputname"
        !          7251:          libname=$func_stripname_result
        !          7252:        fi
        !          7253:        ;;
        !          7254:       esac
1.1       misho    7255: 
1.1.1.2 ! misho    7256:       if test -n "$objs"; then
        !          7257:        if test "$deplibs_check_method" != pass_all; then
        !          7258:          func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
        !          7259:        else
        !          7260:          echo
        !          7261:          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
        !          7262:          $ECHO "*** objects $objs is not portable!"
        !          7263:          func_append libobjs " $objs"
        !          7264:        fi
        !          7265:       fi
1.1       misho    7266: 
1.1.1.2 ! misho    7267:       test "$dlself" != no && \
        !          7268:        func_warning "\`-dlopen self' is ignored for libtool libraries"
1.1       misho    7269: 
1.1.1.2 ! misho    7270:       set dummy $rpath
        !          7271:       shift
        !          7272:       test "$#" -gt 1 && \
        !          7273:        func_warning "ignoring multiple \`-rpath's for a libtool library"
1.1       misho    7274: 
1.1.1.2 ! misho    7275:       install_libdir="$1"
1.1       misho    7276: 
1.1.1.2 ! misho    7277:       oldlibs=
        !          7278:       if test -z "$rpath"; then
        !          7279:        if test "$build_libtool_libs" = yes; then
        !          7280:          # Building a libtool convenience library.
        !          7281:          # Some compilers have problems with a `.al' extension so
        !          7282:          # convenience libraries should have the same extension an
        !          7283:          # archive normally would.
        !          7284:          oldlibs="$output_objdir/$libname.$libext $oldlibs"
        !          7285:          build_libtool_libs=convenience
        !          7286:          build_old_libs=yes
        !          7287:        fi
1.1       misho    7288: 
1.1.1.2 ! misho    7289:        test -n "$vinfo" && \
        !          7290:          func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
1.1       misho    7291: 
1.1.1.2 ! misho    7292:        test -n "$release" && \
        !          7293:          func_warning "\`-release' is ignored for convenience libraries"
        !          7294:       else
1.1       misho    7295: 
1.1.1.2 ! misho    7296:        # Parse the version information argument.
        !          7297:        save_ifs="$IFS"; IFS=':'
        !          7298:        set dummy $vinfo 0 0 0
        !          7299:        shift
        !          7300:        IFS="$save_ifs"
1.1       misho    7301: 
1.1.1.2 ! misho    7302:        test -n "$7" && \
        !          7303:          func_fatal_help "too many parameters to \`-version-info'"
1.1       misho    7304: 
1.1.1.2 ! misho    7305:        # convert absolute version numbers to libtool ages
        !          7306:        # this retains compatibility with .la files and attempts
        !          7307:        # to make the code below a bit more comprehensible
1.1       misho    7308: 
1.1.1.2 ! misho    7309:        case $vinfo_number in
        !          7310:        yes)
        !          7311:          number_major="$1"
        !          7312:          number_minor="$2"
        !          7313:          number_revision="$3"
        !          7314:          #
        !          7315:          # There are really only two kinds -- those that
        !          7316:          # use the current revision as the major version
        !          7317:          # and those that subtract age and use age as
        !          7318:          # a minor version.  But, then there is irix
        !          7319:          # which has an extra 1 added just for fun
        !          7320:          #
        !          7321:          case $version_type in
        !          7322:          darwin|linux|osf|windows|none)
        !          7323:            func_arith $number_major + $number_minor
        !          7324:            current=$func_arith_result
        !          7325:            age="$number_minor"
        !          7326:            revision="$number_revision"
        !          7327:            ;;
        !          7328:          freebsd-aout|freebsd-elf|qnx|sunos)
        !          7329:            current="$number_major"
        !          7330:            revision="$number_minor"
        !          7331:            age="0"
        !          7332:            ;;
        !          7333:          irix|nonstopux)
        !          7334:            func_arith $number_major + $number_minor
        !          7335:            current=$func_arith_result
        !          7336:            age="$number_minor"
        !          7337:            revision="$number_minor"
        !          7338:            lt_irix_increment=no
        !          7339:            ;;
        !          7340:          *)
        !          7341:            func_fatal_configuration "$modename: unknown library version type \`$version_type'"
        !          7342:            ;;
        !          7343:          esac
        !          7344:          ;;
        !          7345:        no)
        !          7346:          current="$1"
        !          7347:          revision="$2"
        !          7348:          age="$3"
        !          7349:          ;;
        !          7350:        esac
1.1       misho    7351: 
1.1.1.2 ! misho    7352:        # Check that each of the things are valid numbers.
        !          7353:        case $current in
        !          7354:        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        !          7355:        *)
        !          7356:          func_error "CURRENT \`$current' must be a nonnegative integer"
        !          7357:          func_fatal_error "\`$vinfo' is not valid version information"
        !          7358:          ;;
        !          7359:        esac
1.1       misho    7360: 
1.1.1.2 ! misho    7361:        case $revision in
        !          7362:        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        !          7363:        *)
        !          7364:          func_error "REVISION \`$revision' must be a nonnegative integer"
        !          7365:          func_fatal_error "\`$vinfo' is not valid version information"
        !          7366:          ;;
        !          7367:        esac
1.1       misho    7368: 
1.1.1.2 ! misho    7369:        case $age in
        !          7370:        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        !          7371:        *)
        !          7372:          func_error "AGE \`$age' must be a nonnegative integer"
        !          7373:          func_fatal_error "\`$vinfo' is not valid version information"
        !          7374:          ;;
        !          7375:        esac
1.1       misho    7376: 
1.1.1.2 ! misho    7377:        if test "$age" -gt "$current"; then
        !          7378:          func_error "AGE \`$age' is greater than the current interface number \`$current'"
        !          7379:          func_fatal_error "\`$vinfo' is not valid version information"
        !          7380:        fi
1.1       misho    7381: 
1.1.1.2 ! misho    7382:        # Calculate the version variables.
        !          7383:        major=
        !          7384:        versuffix=
        !          7385:        verstring=
        !          7386:        case $version_type in
        !          7387:        none) ;;
1.1       misho    7388: 
1.1.1.2 ! misho    7389:        darwin)
        !          7390:          # Like Linux, but with the current version available in
        !          7391:          # verstring for coding it into the library header
        !          7392:          func_arith $current - $age
        !          7393:          major=.$func_arith_result
        !          7394:          versuffix="$major.$age.$revision"
        !          7395:          # Darwin ld doesn't like 0 for these options...
        !          7396:          func_arith $current + 1
        !          7397:          minor_current=$func_arith_result
        !          7398:          xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
        !          7399:          verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
        !          7400:          ;;
1.1       misho    7401: 
1.1.1.2 ! misho    7402:        freebsd-aout)
        !          7403:          major=".$current"
        !          7404:          versuffix=".$current.$revision";
        !          7405:          ;;
1.1       misho    7406: 
1.1.1.2 ! misho    7407:        freebsd-elf)
        !          7408:          major=".$current"
        !          7409:          versuffix=".$current"
        !          7410:          ;;
1.1       misho    7411: 
1.1.1.2 ! misho    7412:        irix | nonstopux)
        !          7413:          if test "X$lt_irix_increment" = "Xno"; then
        !          7414:            func_arith $current - $age
        !          7415:          else
        !          7416:            func_arith $current - $age + 1
        !          7417:          fi
        !          7418:          major=$func_arith_result
1.1       misho    7419: 
1.1.1.2 ! misho    7420:          case $version_type in
        !          7421:            nonstopux) verstring_prefix=nonstopux ;;
        !          7422:            *)         verstring_prefix=sgi ;;
        !          7423:          esac
        !          7424:          verstring="$verstring_prefix$major.$revision"
1.1       misho    7425: 
1.1.1.2 ! misho    7426:          # Add in all the interfaces that we are compatible with.
        !          7427:          loop=$revision
        !          7428:          while test "$loop" -ne 0; do
        !          7429:            func_arith $revision - $loop
        !          7430:            iface=$func_arith_result
        !          7431:            func_arith $loop - 1
        !          7432:            loop=$func_arith_result
        !          7433:            verstring="$verstring_prefix$major.$iface:$verstring"
        !          7434:          done
1.1       misho    7435: 
1.1.1.2 ! misho    7436:          # Before this point, $major must not contain `.'.
        !          7437:          major=.$major
        !          7438:          versuffix="$major.$revision"
        !          7439:          ;;
1.1       misho    7440: 
1.1.1.2 ! misho    7441:        linux)
        !          7442:          func_arith $current - $age
        !          7443:          major=.$func_arith_result
        !          7444:          versuffix="$major.$age.$revision"
        !          7445:          ;;
1.1       misho    7446: 
1.1.1.2 ! misho    7447:        osf)
        !          7448:          func_arith $current - $age
        !          7449:          major=.$func_arith_result
        !          7450:          versuffix=".$current.$age.$revision"
        !          7451:          verstring="$current.$age.$revision"
1.1       misho    7452: 
1.1.1.2 ! misho    7453:          # Add in all the interfaces that we are compatible with.
        !          7454:          loop=$age
        !          7455:          while test "$loop" -ne 0; do
        !          7456:            func_arith $current - $loop
        !          7457:            iface=$func_arith_result
        !          7458:            func_arith $loop - 1
        !          7459:            loop=$func_arith_result
        !          7460:            verstring="$verstring:${iface}.0"
        !          7461:          done
1.1       misho    7462: 
1.1.1.2 ! misho    7463:          # Make executables depend on our current version.
        !          7464:          func_append verstring ":${current}.0"
        !          7465:          ;;
1.1       misho    7466: 
1.1.1.2 ! misho    7467:        qnx)
        !          7468:          major=".$current"
        !          7469:          versuffix=".$current"
        !          7470:          ;;
1.1       misho    7471: 
1.1.1.2 ! misho    7472:        sunos)
        !          7473:          major=".$current"
        !          7474:          versuffix=".$current.$revision"
        !          7475:          ;;
1.1       misho    7476: 
1.1.1.2 ! misho    7477:        windows)
        !          7478:          # Use '-' rather than '.', since we only want one
        !          7479:          # extension on DOS 8.3 filesystems.
        !          7480:          func_arith $current - $age
        !          7481:          major=$func_arith_result
        !          7482:          versuffix="-$major"
        !          7483:          ;;
1.1       misho    7484: 
1.1.1.2 ! misho    7485:        *)
        !          7486:          func_fatal_configuration "unknown library version type \`$version_type'"
        !          7487:          ;;
        !          7488:        esac
1.1       misho    7489: 
1.1.1.2 ! misho    7490:        # Clear the version info if we defaulted, and they specified a release.
        !          7491:        if test -z "$vinfo" && test -n "$release"; then
        !          7492:          major=
        !          7493:          case $version_type in
        !          7494:          darwin)
        !          7495:            # we can't check for "0.0" in archive_cmds due to quoting
        !          7496:            # problems, so we reset it completely
        !          7497:            verstring=
        !          7498:            ;;
        !          7499:          *)
        !          7500:            verstring="0.0"
        !          7501:            ;;
        !          7502:          esac
        !          7503:          if test "$need_version" = no; then
        !          7504:            versuffix=
        !          7505:          else
        !          7506:            versuffix=".0.0"
        !          7507:          fi
        !          7508:        fi
1.1       misho    7509: 
1.1.1.2 ! misho    7510:        # Remove version info from name if versioning should be avoided
        !          7511:        if test "$avoid_version" = yes && test "$need_version" = no; then
        !          7512:          major=
        !          7513:          versuffix=
        !          7514:          verstring=""
        !          7515:        fi
1.1       misho    7516: 
1.1.1.2 ! misho    7517:        # Check to see if the archive will have undefined symbols.
        !          7518:        if test "$allow_undefined" = yes; then
        !          7519:          if test "$allow_undefined_flag" = unsupported; then
        !          7520:            func_warning "undefined symbols not allowed in $host shared libraries"
        !          7521:            build_libtool_libs=no
        !          7522:            build_old_libs=yes
        !          7523:          fi
        !          7524:        else
        !          7525:          # Don't allow undefined symbols.
        !          7526:          allow_undefined_flag="$no_undefined_flag"
        !          7527:        fi
1.1       misho    7528: 
1.1.1.2 ! misho    7529:       fi
1.1       misho    7530: 
1.1.1.2 ! misho    7531:       func_generate_dlsyms "$libname" "$libname" "yes"
        !          7532:       func_append libobjs " $symfileobj"
        !          7533:       test "X$libobjs" = "X " && libobjs=
1.1       misho    7534: 
1.1.1.2 ! misho    7535:       if test "$opt_mode" != relink; then
        !          7536:        # Remove our outputs, but don't remove object files since they
        !          7537:        # may have been created when compiling PIC objects.
        !          7538:        removelist=
        !          7539:        tempremovelist=`$ECHO "$output_objdir/*"`
        !          7540:        for p in $tempremovelist; do
        !          7541:          case $p in
        !          7542:            *.$objext | *.gcno)
        !          7543:               ;;
        !          7544:            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
        !          7545:               if test "X$precious_files_regex" != "X"; then
        !          7546:                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
        !          7547:                 then
        !          7548:                   continue
        !          7549:                 fi
        !          7550:               fi
        !          7551:               func_append removelist " $p"
        !          7552:               ;;
        !          7553:            *) ;;
        !          7554:          esac
        !          7555:        done
        !          7556:        test -n "$removelist" && \
        !          7557:          func_show_eval "${RM}r \$removelist"
        !          7558:       fi
1.1       misho    7559: 
1.1.1.2 ! misho    7560:       # Now set the variables for building old libraries.
        !          7561:       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
        !          7562:        func_append oldlibs " $output_objdir/$libname.$libext"
1.1       misho    7563: 
1.1.1.2 ! misho    7564:        # Transform .lo files to .o files.
        !          7565:        oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
        !          7566:       fi
1.1       misho    7567: 
1.1.1.2 ! misho    7568:       # Eliminate all temporary directories.
        !          7569:       #for path in $notinst_path; do
        !          7570:       #        lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
        !          7571:       #        deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
        !          7572:       #        dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
        !          7573:       #done
1.1       misho    7574: 
1.1.1.2 ! misho    7575:       if test -n "$xrpath"; then
        !          7576:        # If the user specified any rpath flags, then add them.
        !          7577:        temp_xrpath=
        !          7578:        for libdir in $xrpath; do
        !          7579:          func_replace_sysroot "$libdir"
        !          7580:          func_append temp_xrpath " -R$func_replace_sysroot_result"
        !          7581:          case "$finalize_rpath " in
        !          7582:          *" $libdir "*) ;;
        !          7583:          *) func_append finalize_rpath " $libdir" ;;
        !          7584:          esac
        !          7585:        done
        !          7586:        if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
        !          7587:          dependency_libs="$temp_xrpath $dependency_libs"
        !          7588:        fi
        !          7589:       fi
1.1       misho    7590: 
1.1.1.2 ! misho    7591:       # Make sure dlfiles contains only unique files that won't be dlpreopened
        !          7592:       old_dlfiles="$dlfiles"
        !          7593:       dlfiles=
        !          7594:       for lib in $old_dlfiles; do
        !          7595:        case " $dlprefiles $dlfiles " in
        !          7596:        *" $lib "*) ;;
        !          7597:        *) func_append dlfiles " $lib" ;;
        !          7598:        esac
        !          7599:       done
1.1       misho    7600: 
1.1.1.2 ! misho    7601:       # Make sure dlprefiles contains only unique files
        !          7602:       old_dlprefiles="$dlprefiles"
        !          7603:       dlprefiles=
        !          7604:       for lib in $old_dlprefiles; do
        !          7605:        case "$dlprefiles " in
        !          7606:        *" $lib "*) ;;
        !          7607:        *) func_append dlprefiles " $lib" ;;
        !          7608:        esac
        !          7609:       done
1.1       misho    7610: 
1.1.1.2 ! misho    7611:       if test "$build_libtool_libs" = yes; then
        !          7612:        if test -n "$rpath"; then
        !          7613:          case $host in
        !          7614:          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
        !          7615:            # these systems don't actually have a c library (as such)!
        !          7616:            ;;
        !          7617:          *-*-rhapsody* | *-*-darwin1.[012])
        !          7618:            # Rhapsody C library is in the System framework
        !          7619:            func_append deplibs " System.ltframework"
        !          7620:            ;;
        !          7621:          *-*-netbsd*)
        !          7622:            # Don't link with libc until the a.out ld.so is fixed.
        !          7623:            ;;
        !          7624:          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
        !          7625:            # Do not include libc due to us having libc/libc_r.
        !          7626:            ;;
        !          7627:          *-*-sco3.2v5* | *-*-sco5v6*)
        !          7628:            # Causes problems with __ctype
        !          7629:            ;;
        !          7630:          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
        !          7631:            # Compiler inserts libc in the correct place for threads to work
        !          7632:            ;;
        !          7633:          *)
        !          7634:            # Add libc to deplibs on all other systems if necessary.
        !          7635:            if test "$build_libtool_need_lc" = "yes"; then
        !          7636:              func_append deplibs " -lc"
        !          7637:            fi
        !          7638:            ;;
        !          7639:          esac
        !          7640:        fi
1.1       misho    7641: 
1.1.1.2 ! misho    7642:        # Transform deplibs into only deplibs that can be linked in shared.
        !          7643:        name_save=$name
        !          7644:        libname_save=$libname
        !          7645:        release_save=$release
        !          7646:        versuffix_save=$versuffix
        !          7647:        major_save=$major
        !          7648:        # I'm not sure if I'm treating the release correctly.  I think
        !          7649:        # release should show up in the -l (ie -lgmp5) so we don't want to
        !          7650:        # add it in twice.  Is that correct?
        !          7651:        release=""
        !          7652:        versuffix=""
        !          7653:        major=""
        !          7654:        newdeplibs=
        !          7655:        droppeddeps=no
        !          7656:        case $deplibs_check_method in
        !          7657:        pass_all)
        !          7658:          # Don't check for shared/static.  Everything works.
        !          7659:          # This might be a little naive.  We might want to check
        !          7660:          # whether the library exists or not.  But this is on
        !          7661:          # osf3 & osf4 and I'm not really sure... Just
        !          7662:          # implementing what was already the behavior.
        !          7663:          newdeplibs=$deplibs
        !          7664:          ;;
        !          7665:        test_compile)
        !          7666:          # This code stresses the "libraries are programs" paradigm to its
        !          7667:          # limits. Maybe even breaks it.  We compile a program, linking it
        !          7668:          # against the deplibs as a proxy for the library.  Then we can check
        !          7669:          # whether they linked in statically or dynamically with ldd.
        !          7670:          $opt_dry_run || $RM conftest.c
        !          7671:          cat > conftest.c <<EOF
        !          7672:          int main() { return 0; }
        !          7673: EOF
        !          7674:          $opt_dry_run || $RM conftest
        !          7675:          if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
        !          7676:            ldd_output=`ldd conftest`
        !          7677:            for i in $deplibs; do
        !          7678:              case $i in
        !          7679:              -l*)
        !          7680:                func_stripname -l '' "$i"
        !          7681:                name=$func_stripname_result
        !          7682:                if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          7683:                  case " $predeps $postdeps " in
        !          7684:                  *" $i "*)
        !          7685:                    func_append newdeplibs " $i"
        !          7686:                    i=""
        !          7687:                    ;;
        !          7688:                  esac
        !          7689:                fi
        !          7690:                if test -n "$i" ; then
        !          7691:                  libname=`eval "\\$ECHO \"$libname_spec\""`
        !          7692:                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
        !          7693:                  set dummy $deplib_matches; shift
        !          7694:                  deplib_match=$1
        !          7695:                  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
        !          7696:                    func_append newdeplibs " $i"
        !          7697:                  else
        !          7698:                    droppeddeps=yes
        !          7699:                    echo
        !          7700:                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
        !          7701:                    echo "*** I have the capability to make that library automatically link in when"
        !          7702:                    echo "*** you link to this library.  But I can only do this if you have a"
        !          7703:                    echo "*** shared version of the library, which I believe you do not have"
        !          7704:                    echo "*** because a test_compile did reveal that the linker did not use it for"
        !          7705:                    echo "*** its dynamic dependency list that programs get resolved with at runtime."
        !          7706:                  fi
        !          7707:                fi
        !          7708:                ;;
        !          7709:              *)
        !          7710:                func_append newdeplibs " $i"
        !          7711:                ;;
        !          7712:              esac
        !          7713:            done
        !          7714:          else
        !          7715:            # Error occurred in the first compile.  Let's try to salvage
        !          7716:            # the situation: Compile a separate program for each library.
        !          7717:            for i in $deplibs; do
        !          7718:              case $i in
        !          7719:              -l*)
        !          7720:                func_stripname -l '' "$i"
        !          7721:                name=$func_stripname_result
        !          7722:                $opt_dry_run || $RM conftest
        !          7723:                if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
        !          7724:                  ldd_output=`ldd conftest`
        !          7725:                  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          7726:                    case " $predeps $postdeps " in
        !          7727:                    *" $i "*)
        !          7728:                      func_append newdeplibs " $i"
        !          7729:                      i=""
        !          7730:                      ;;
        !          7731:                    esac
        !          7732:                  fi
        !          7733:                  if test -n "$i" ; then
        !          7734:                    libname=`eval "\\$ECHO \"$libname_spec\""`
        !          7735:                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
        !          7736:                    set dummy $deplib_matches; shift
        !          7737:                    deplib_match=$1
        !          7738:                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
        !          7739:                      func_append newdeplibs " $i"
        !          7740:                    else
        !          7741:                      droppeddeps=yes
        !          7742:                      echo
        !          7743:                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
        !          7744:                      echo "*** I have the capability to make that library automatically link in when"
        !          7745:                      echo "*** you link to this library.  But I can only do this if you have a"
        !          7746:                      echo "*** shared version of the library, which you do not appear to have"
        !          7747:                      echo "*** because a test_compile did reveal that the linker did not use this one"
        !          7748:                      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
        !          7749:                    fi
        !          7750:                  fi
        !          7751:                else
        !          7752:                  droppeddeps=yes
        !          7753:                  echo
        !          7754:                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
        !          7755:                  echo "*** make it link in!  You will probably need to install it or some"
        !          7756:                  echo "*** library that it depends on before this library will be fully"
        !          7757:                  echo "*** functional.  Installing it before continuing would be even better."
        !          7758:                fi
        !          7759:                ;;
        !          7760:              *)
        !          7761:                func_append newdeplibs " $i"
        !          7762:                ;;
        !          7763:              esac
        !          7764:            done
        !          7765:          fi
        !          7766:          ;;
        !          7767:        file_magic*)
        !          7768:          set dummy $deplibs_check_method; shift
        !          7769:          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
        !          7770:          for a_deplib in $deplibs; do
        !          7771:            case $a_deplib in
        !          7772:            -l*)
        !          7773:              func_stripname -l '' "$a_deplib"
        !          7774:              name=$func_stripname_result
        !          7775:              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          7776:                case " $predeps $postdeps " in
        !          7777:                *" $a_deplib "*)
        !          7778:                  func_append newdeplibs " $a_deplib"
        !          7779:                  a_deplib=""
        !          7780:                  ;;
        !          7781:                esac
        !          7782:              fi
        !          7783:              if test -n "$a_deplib" ; then
        !          7784:                libname=`eval "\\$ECHO \"$libname_spec\""`
        !          7785:                if test -n "$file_magic_glob"; then
        !          7786:                  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
        !          7787:                else
        !          7788:                  libnameglob=$libname
        !          7789:                fi
        !          7790:                test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
        !          7791:                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
        !          7792:                  if test "$want_nocaseglob" = yes; then
        !          7793:                    shopt -s nocaseglob
        !          7794:                    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
        !          7795:                    $nocaseglob
        !          7796:                  else
        !          7797:                    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
        !          7798:                  fi
        !          7799:                  for potent_lib in $potential_libs; do
        !          7800:                      # Follow soft links.
        !          7801:                      if ls -lLd "$potent_lib" 2>/dev/null |
        !          7802:                         $GREP " -> " >/dev/null; then
        !          7803:                        continue
        !          7804:                      fi
        !          7805:                      # The statement above tries to avoid entering an
        !          7806:                      # endless loop below, in case of cyclic links.
        !          7807:                      # We might still enter an endless loop, since a link
        !          7808:                      # loop can be closed while we follow links,
        !          7809:                      # but so what?
        !          7810:                      potlib="$potent_lib"
        !          7811:                      while test -h "$potlib" 2>/dev/null; do
        !          7812:                        potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
        !          7813:                        case $potliblink in
        !          7814:                        [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
        !          7815:                        *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
        !          7816:                        esac
        !          7817:                      done
        !          7818:                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
        !          7819:                         $SED -e 10q |
        !          7820:                         $EGREP "$file_magic_regex" > /dev/null; then
        !          7821:                        func_append newdeplibs " $a_deplib"
        !          7822:                        a_deplib=""
        !          7823:                        break 2
        !          7824:                      fi
        !          7825:                  done
        !          7826:                done
        !          7827:              fi
        !          7828:              if test -n "$a_deplib" ; then
        !          7829:                droppeddeps=yes
        !          7830:                echo
        !          7831:                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
        !          7832:                echo "*** I have the capability to make that library automatically link in when"
        !          7833:                echo "*** you link to this library.  But I can only do this if you have a"
        !          7834:                echo "*** shared version of the library, which you do not appear to have"
        !          7835:                echo "*** because I did check the linker path looking for a file starting"
        !          7836:                if test -z "$potlib" ; then
        !          7837:                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
        !          7838:                else
        !          7839:                  $ECHO "*** with $libname and none of the candidates passed a file format test"
        !          7840:                  $ECHO "*** using a file magic. Last file checked: $potlib"
        !          7841:                fi
        !          7842:              fi
        !          7843:              ;;
        !          7844:            *)
        !          7845:              # Add a -L argument.
        !          7846:              func_append newdeplibs " $a_deplib"
        !          7847:              ;;
        !          7848:            esac
        !          7849:          done # Gone through all deplibs.
        !          7850:          ;;
        !          7851:        match_pattern*)
        !          7852:          set dummy $deplibs_check_method; shift
        !          7853:          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
        !          7854:          for a_deplib in $deplibs; do
        !          7855:            case $a_deplib in
        !          7856:            -l*)
        !          7857:              func_stripname -l '' "$a_deplib"
        !          7858:              name=$func_stripname_result
        !          7859:              if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          7860:                case " $predeps $postdeps " in
        !          7861:                *" $a_deplib "*)
        !          7862:                  func_append newdeplibs " $a_deplib"
        !          7863:                  a_deplib=""
        !          7864:                  ;;
        !          7865:                esac
        !          7866:              fi
        !          7867:              if test -n "$a_deplib" ; then
        !          7868:                libname=`eval "\\$ECHO \"$libname_spec\""`
        !          7869:                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
        !          7870:                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
        !          7871:                  for potent_lib in $potential_libs; do
        !          7872:                    potlib="$potent_lib" # see symlink-check above in file_magic test
        !          7873:                    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
        !          7874:                       $EGREP "$match_pattern_regex" > /dev/null; then
        !          7875:                      func_append newdeplibs " $a_deplib"
        !          7876:                      a_deplib=""
        !          7877:                      break 2
        !          7878:                    fi
        !          7879:                  done
        !          7880:                done
        !          7881:              fi
        !          7882:              if test -n "$a_deplib" ; then
        !          7883:                droppeddeps=yes
        !          7884:                echo
        !          7885:                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
        !          7886:                echo "*** I have the capability to make that library automatically link in when"
        !          7887:                echo "*** you link to this library.  But I can only do this if you have a"
        !          7888:                echo "*** shared version of the library, which you do not appear to have"
        !          7889:                echo "*** because I did check the linker path looking for a file starting"
        !          7890:                if test -z "$potlib" ; then
        !          7891:                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
        !          7892:                else
        !          7893:                  $ECHO "*** with $libname and none of the candidates passed a file format test"
        !          7894:                  $ECHO "*** using a regex pattern. Last file checked: $potlib"
        !          7895:                fi
        !          7896:              fi
        !          7897:              ;;
        !          7898:            *)
        !          7899:              # Add a -L argument.
        !          7900:              func_append newdeplibs " $a_deplib"
        !          7901:              ;;
        !          7902:            esac
        !          7903:          done # Gone through all deplibs.
        !          7904:          ;;
        !          7905:        none | unknown | *)
        !          7906:          newdeplibs=""
        !          7907:          tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
        !          7908:          if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
        !          7909:            for i in $predeps $postdeps ; do
        !          7910:              # can't use Xsed below, because $i might contain '/'
        !          7911:              tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
        !          7912:            done
        !          7913:          fi
        !          7914:          case $tmp_deplibs in
        !          7915:          *[!\  \ ]*)
        !          7916:            echo
        !          7917:            if test "X$deplibs_check_method" = "Xnone"; then
        !          7918:              echo "*** Warning: inter-library dependencies are not supported in this platform."
        !          7919:            else
        !          7920:              echo "*** Warning: inter-library dependencies are not known to be supported."
        !          7921:            fi
        !          7922:            echo "*** All declared inter-library dependencies are being dropped."
        !          7923:            droppeddeps=yes
        !          7924:            ;;
        !          7925:          esac
        !          7926:          ;;
        !          7927:        esac
        !          7928:        versuffix=$versuffix_save
        !          7929:        major=$major_save
        !          7930:        release=$release_save
        !          7931:        libname=$libname_save
        !          7932:        name=$name_save
1.1       misho    7933: 
1.1.1.2 ! misho    7934:        case $host in
        !          7935:        *-*-rhapsody* | *-*-darwin1.[012])
        !          7936:          # On Rhapsody replace the C library with the System framework
        !          7937:          newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
        !          7938:          ;;
        !          7939:        esac
1.1       misho    7940: 
1.1.1.2 ! misho    7941:        if test "$droppeddeps" = yes; then
        !          7942:          if test "$module" = yes; then
        !          7943:            echo
        !          7944:            echo "*** Warning: libtool could not satisfy all declared inter-library"
        !          7945:            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
        !          7946:            echo "*** a static module, that should work as long as the dlopening"
        !          7947:            echo "*** application is linked with the -dlopen flag."
        !          7948:            if test -z "$global_symbol_pipe"; then
        !          7949:              echo
        !          7950:              echo "*** However, this would only work if libtool was able to extract symbol"
        !          7951:              echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
        !          7952:              echo "*** not find such a program.  So, this module is probably useless."
        !          7953:              echo "*** \`nm' from GNU binutils and a full rebuild may help."
        !          7954:            fi
        !          7955:            if test "$build_old_libs" = no; then
        !          7956:              oldlibs="$output_objdir/$libname.$libext"
        !          7957:              build_libtool_libs=module
        !          7958:              build_old_libs=yes
        !          7959:            else
        !          7960:              build_libtool_libs=no
        !          7961:            fi
        !          7962:          else
        !          7963:            echo "*** The inter-library dependencies that have been dropped here will be"
        !          7964:            echo "*** automatically added whenever a program is linked with this library"
        !          7965:            echo "*** or is declared to -dlopen it."
1.1       misho    7966: 
1.1.1.2 ! misho    7967:            if test "$allow_undefined" = no; then
        !          7968:              echo
        !          7969:              echo "*** Since this library must not contain undefined symbols,"
        !          7970:              echo "*** because either the platform does not support them or"
        !          7971:              echo "*** it was explicitly requested with -no-undefined,"
        !          7972:              echo "*** libtool will only create a static version of it."
        !          7973:              if test "$build_old_libs" = no; then
        !          7974:                oldlibs="$output_objdir/$libname.$libext"
        !          7975:                build_libtool_libs=module
        !          7976:                build_old_libs=yes
        !          7977:              else
        !          7978:                build_libtool_libs=no
        !          7979:              fi
        !          7980:            fi
        !          7981:          fi
        !          7982:        fi
        !          7983:        # Done checking deplibs!
        !          7984:        deplibs=$newdeplibs
1.1       misho    7985:       fi
1.1.1.2 ! misho    7986:       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
        !          7987:       case $host in
        !          7988:        *-*-darwin*)
        !          7989:          newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          7990:          new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          7991:          deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          7992:          ;;
        !          7993:       esac
1.1       misho    7994: 
1.1.1.2 ! misho    7995:       # move library search paths that coincide with paths to not yet
        !          7996:       # installed libraries to the beginning of the library search list
        !          7997:       new_libs=
        !          7998:       for path in $notinst_path; do
        !          7999:        case " $new_libs " in
        !          8000:        *" -L$path/$objdir "*) ;;
        !          8001:        *)
        !          8002:          case " $deplibs " in
        !          8003:          *" -L$path/$objdir "*)
        !          8004:            func_append new_libs " -L$path/$objdir" ;;
        !          8005:          esac
        !          8006:          ;;
        !          8007:        esac
        !          8008:       done
        !          8009:       for deplib in $deplibs; do
        !          8010:        case $deplib in
        !          8011:        -L*)
        !          8012:          case " $new_libs " in
        !          8013:          *" $deplib "*) ;;
        !          8014:          *) func_append new_libs " $deplib" ;;
        !          8015:          esac
        !          8016:          ;;
        !          8017:        *) func_append new_libs " $deplib" ;;
        !          8018:        esac
        !          8019:       done
        !          8020:       deplibs="$new_libs"
1.1       misho    8021: 
1.1.1.2 ! misho    8022:       # All the library-specific variables (install_libdir is set above).
        !          8023:       library_names=
        !          8024:       old_library=
        !          8025:       dlname=
1.1       misho    8026: 
1.1.1.2 ! misho    8027:       # Test again, we may have decided not to build it any more
        !          8028:       if test "$build_libtool_libs" = yes; then
        !          8029:        if test "$hardcode_into_libs" = yes; then
        !          8030:          # Hardcode the library paths
        !          8031:          hardcode_libdirs=
        !          8032:          dep_rpath=
        !          8033:          rpath="$finalize_rpath"
        !          8034:          test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
        !          8035:          for libdir in $rpath; do
        !          8036:            if test -n "$hardcode_libdir_flag_spec"; then
        !          8037:              if test -n "$hardcode_libdir_separator"; then
        !          8038:                func_replace_sysroot "$libdir"
        !          8039:                libdir=$func_replace_sysroot_result
        !          8040:                if test -z "$hardcode_libdirs"; then
        !          8041:                  hardcode_libdirs="$libdir"
        !          8042:                else
        !          8043:                  # Just accumulate the unique libdirs.
        !          8044:                  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
        !          8045:                  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
        !          8046:                    ;;
        !          8047:                  *)
        !          8048:                    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
        !          8049:                    ;;
        !          8050:                  esac
        !          8051:                fi
        !          8052:              else
        !          8053:                eval flag=\"$hardcode_libdir_flag_spec\"
        !          8054:                func_append dep_rpath " $flag"
        !          8055:              fi
        !          8056:            elif test -n "$runpath_var"; then
        !          8057:              case "$perm_rpath " in
        !          8058:              *" $libdir "*) ;;
        !          8059:              *) func_apped perm_rpath " $libdir" ;;
        !          8060:              esac
        !          8061:            fi
        !          8062:          done
        !          8063:          # Substitute the hardcoded libdirs into the rpath.
        !          8064:          if test -n "$hardcode_libdir_separator" &&
        !          8065:             test -n "$hardcode_libdirs"; then
        !          8066:            libdir="$hardcode_libdirs"
        !          8067:            if test -n "$hardcode_libdir_flag_spec_ld"; then
        !          8068:              eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
        !          8069:            else
        !          8070:              eval dep_rpath=\"$hardcode_libdir_flag_spec\"
        !          8071:            fi
        !          8072:          fi
        !          8073:          if test -n "$runpath_var" && test -n "$perm_rpath"; then
        !          8074:            # We should set the runpath_var.
        !          8075:            rpath=
        !          8076:            for dir in $perm_rpath; do
        !          8077:              func_append rpath "$dir:"
        !          8078:            done
        !          8079:            eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
        !          8080:          fi
        !          8081:          test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
        !          8082:        fi
1.1       misho    8083: 
1.1.1.2 ! misho    8084:        shlibpath="$finalize_shlibpath"
        !          8085:        test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
        !          8086:        if test -n "$shlibpath"; then
        !          8087:          eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
        !          8088:        fi
1.1       misho    8089: 
1.1.1.2 ! misho    8090:        # Get the real and link names of the library.
        !          8091:        eval shared_ext=\"$shrext_cmds\"
        !          8092:        eval library_names=\"$library_names_spec\"
        !          8093:        set dummy $library_names
        !          8094:        shift
        !          8095:        realname="$1"
        !          8096:        shift
1.1       misho    8097: 
1.1.1.2 ! misho    8098:        if test -n "$soname_spec"; then
        !          8099:          eval soname=\"$soname_spec\"
        !          8100:        else
        !          8101:          soname="$realname"
1.1       misho    8102:        fi
1.1.1.2 ! misho    8103:        if test -z "$dlname"; then
        !          8104:          dlname=$soname
1.1       misho    8105:        fi
                   8106: 
1.1.1.2 ! misho    8107:        lib="$output_objdir/$realname"
        !          8108:        linknames=
        !          8109:        for link
        !          8110:        do
        !          8111:          func_append linknames " $link"
        !          8112:        done
1.1       misho    8113: 
1.1.1.2 ! misho    8114:        # Use standard objects if they are pic
        !          8115:        test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
        !          8116:        test "X$libobjs" = "X " && libobjs=
        !          8117: 
        !          8118:        delfiles=
        !          8119:        if test -n "$export_symbols" && test -n "$include_expsyms"; then
        !          8120:          $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
        !          8121:          export_symbols="$output_objdir/$libname.uexp"
        !          8122:          func_append delfiles " $export_symbols"
        !          8123:        fi
        !          8124: 
        !          8125:        orig_export_symbols=
        !          8126:        case $host_os in
        !          8127:        cygwin* | mingw* | cegcc*)
        !          8128:          if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
        !          8129:            # exporting using user supplied symfile
        !          8130:            if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
        !          8131:              # and it's NOT already a .def file. Must figure out
        !          8132:              # which of the given symbols are data symbols and tag
        !          8133:              # them as such. So, trigger use of export_symbols_cmds.
        !          8134:              # export_symbols gets reassigned inside the "prepare
        !          8135:              # the list of exported symbols" if statement, so the
        !          8136:              # include_expsyms logic still works.
        !          8137:              orig_export_symbols="$export_symbols"
        !          8138:              export_symbols=
        !          8139:              always_export_symbols=yes
        !          8140:            fi
        !          8141:          fi
1.1       misho    8142:          ;;
                   8143:        esac
                   8144: 
1.1.1.2 ! misho    8145:        # Prepare the list of exported symbols
        !          8146:        if test -z "$export_symbols"; then
        !          8147:          if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
        !          8148:            func_verbose "generating symbol list for \`$libname.la'"
        !          8149:            export_symbols="$output_objdir/$libname.exp"
        !          8150:            $opt_dry_run || $RM $export_symbols
        !          8151:            cmds=$export_symbols_cmds
        !          8152:            save_ifs="$IFS"; IFS='~'
        !          8153:            for cmd1 in $cmds; do
        !          8154:              IFS="$save_ifs"
        !          8155:              # Take the normal branch if the nm_file_list_spec branch
        !          8156:              # doesn't work or if tool conversion is not needed.
        !          8157:              case $nm_file_list_spec~$to_tool_file_cmd in
        !          8158:                *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
        !          8159:                  try_normal_branch=yes
        !          8160:                  eval cmd=\"$cmd1\"
        !          8161:                  func_len " $cmd"
        !          8162:                  len=$func_len_result
        !          8163:                  ;;
        !          8164:                *)
        !          8165:                  try_normal_branch=no
        !          8166:                  ;;
        !          8167:              esac
        !          8168:              if test "$try_normal_branch" = yes \
        !          8169:                 && { test "$len" -lt "$max_cmd_len" \
        !          8170:                      || test "$max_cmd_len" -le -1; }
        !          8171:              then
        !          8172:                func_show_eval "$cmd" 'exit $?'
        !          8173:                skipped_export=false
        !          8174:              elif test -n "$nm_file_list_spec"; then
        !          8175:                func_basename "$output"
        !          8176:                output_la=$func_basename_result
        !          8177:                save_libobjs=$libobjs
        !          8178:                save_output=$output
        !          8179:                output=${output_objdir}/${output_la}.nm
        !          8180:                func_to_tool_file "$output"
        !          8181:                libobjs=$nm_file_list_spec$func_to_tool_file_result
        !          8182:                func_append delfiles " $output"
        !          8183:                func_verbose "creating $NM input file list: $output"
        !          8184:                for obj in $save_libobjs; do
        !          8185:                  func_to_tool_file "$obj"
        !          8186:                  $ECHO "$func_to_tool_file_result"
        !          8187:                done > "$output"
        !          8188:                eval cmd=\"$cmd1\"
        !          8189:                func_show_eval "$cmd" 'exit $?'
        !          8190:                output=$save_output
        !          8191:                libobjs=$save_libobjs
        !          8192:                skipped_export=false
        !          8193:              else
        !          8194:                # The command line is too long to execute in one step.
        !          8195:                func_verbose "using reloadable object file for export list..."
        !          8196:                skipped_export=:
        !          8197:                # Break out early, otherwise skipped_export may be
        !          8198:                # set to false by a later but shorter cmd.
        !          8199:                break
        !          8200:              fi
        !          8201:            done
        !          8202:            IFS="$save_ifs"
        !          8203:            if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
        !          8204:              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
        !          8205:              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
        !          8206:            fi
        !          8207:          fi
1.1       misho    8208:        fi
                   8209: 
1.1.1.2 ! misho    8210:        if test -n "$export_symbols" && test -n "$include_expsyms"; then
        !          8211:          tmp_export_symbols="$export_symbols"
        !          8212:          test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
        !          8213:          $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
        !          8214:        fi
        !          8215: 
        !          8216:        if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
        !          8217:          # The given exports_symbols file has to be filtered, so filter it.
        !          8218:          func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
        !          8219:          # FIXME: $output_objdir/$libname.filter potentially contains lots of
        !          8220:          # 's' commands which not all seds can handle. GNU sed should be fine
        !          8221:          # though. Also, the filter scales superlinearly with the number of
        !          8222:          # global variables. join(1) would be nice here, but unfortunately
        !          8223:          # isn't a blessed tool.
        !          8224:          $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
        !          8225:          func_append delfiles " $export_symbols $output_objdir/$libname.filter"
        !          8226:          export_symbols=$output_objdir/$libname.def
        !          8227:          $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
        !          8228:        fi
1.1       misho    8229: 
1.1.1.2 ! misho    8230:        tmp_deplibs=
        !          8231:        for test_deplib in $deplibs; do
        !          8232:          case " $convenience " in
        !          8233:          *" $test_deplib "*) ;;
        !          8234:          *)
        !          8235:            func_append tmp_deplibs " $test_deplib"
        !          8236:            ;;
        !          8237:          esac
        !          8238:        done
        !          8239:        deplibs="$tmp_deplibs"
1.1       misho    8240: 
1.1.1.2 ! misho    8241:        if test -n "$convenience"; then
        !          8242:          if test -n "$whole_archive_flag_spec" &&
        !          8243:            test "$compiler_needs_object" = yes &&
        !          8244:            test -z "$libobjs"; then
        !          8245:            # extract the archives, so we have objects to list.
        !          8246:            # TODO: could optimize this to just extract one archive.
        !          8247:            whole_archive_flag_spec=
        !          8248:          fi
        !          8249:          if test -n "$whole_archive_flag_spec"; then
        !          8250:            save_libobjs=$libobjs
        !          8251:            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
        !          8252:            test "X$libobjs" = "X " && libobjs=
        !          8253:          else
1.1       misho    8254:            gentop="$output_objdir/${outputname}x"
1.1.1.2 ! misho    8255:            func_append generated " $gentop"
1.1       misho    8256: 
1.1.1.2 ! misho    8257:            func_extract_archives $gentop $convenience
        !          8258:            func_append libobjs " $func_extract_archives_result"
        !          8259:            test "X$libobjs" = "X " && libobjs=
1.1       misho    8260:          fi
1.1.1.2 ! misho    8261:        fi
1.1       misho    8262: 
1.1.1.2 ! misho    8263:        if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
        !          8264:          eval flag=\"$thread_safe_flag_spec\"
        !          8265:          func_append linker_flags " $flag"
1.1       misho    8266:        fi
                   8267: 
1.1.1.2 ! misho    8268:        # Make a backup of the uninstalled library when relinking
        !          8269:        if test "$opt_mode" = relink; then
        !          8270:          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
        !          8271:        fi
1.1       misho    8272: 
1.1.1.2 ! misho    8273:        # Do each of the archive commands.
        !          8274:        if test "$module" = yes && test -n "$module_cmds" ; then
        !          8275:          if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
        !          8276:            eval test_cmds=\"$module_expsym_cmds\"
        !          8277:            cmds=$module_expsym_cmds
        !          8278:          else
        !          8279:            eval test_cmds=\"$module_cmds\"
        !          8280:            cmds=$module_cmds
        !          8281:          fi
1.1       misho    8282:        else
1.1.1.2 ! misho    8283:          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
        !          8284:            eval test_cmds=\"$archive_expsym_cmds\"
        !          8285:            cmds=$archive_expsym_cmds
1.1       misho    8286:          else
1.1.1.2 ! misho    8287:            eval test_cmds=\"$archive_cmds\"
        !          8288:            cmds=$archive_cmds
1.1       misho    8289:          fi
                   8290:        fi
                   8291: 
1.1.1.2 ! misho    8292:        if test "X$skipped_export" != "X:" &&
        !          8293:           func_len " $test_cmds" &&
        !          8294:           len=$func_len_result &&
        !          8295:           test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
        !          8296:          :
1.1       misho    8297:        else
1.1.1.2 ! misho    8298:          # The command line is too long to link in one step, link piecewise
        !          8299:          # or, if using GNU ld and skipped_export is not :, use a linker
        !          8300:          # script.
1.1       misho    8301: 
1.1.1.2 ! misho    8302:          # Save the value of $output and $libobjs because we want to
        !          8303:          # use them later.  If we have whole_archive_flag_spec, we
        !          8304:          # want to use save_libobjs as it was before
        !          8305:          # whole_archive_flag_spec was expanded, because we can't
        !          8306:          # assume the linker understands whole_archive_flag_spec.
        !          8307:          # This may have to be revisited, in case too many
        !          8308:          # convenience libraries get linked in and end up exceeding
        !          8309:          # the spec.
        !          8310:          if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
        !          8311:            save_libobjs=$libobjs
        !          8312:          fi
        !          8313:          save_output=$output
        !          8314:          func_basename "$output"
        !          8315:          output_la=$func_basename_result
1.1       misho    8316: 
1.1.1.2 ! misho    8317:          # Clear the reloadable object creation command queue and
        !          8318:          # initialize k to one.
        !          8319:          test_cmds=
        !          8320:          concat_cmds=
        !          8321:          objlist=
        !          8322:          last_robj=
        !          8323:          k=1
        !          8324: 
        !          8325:          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
        !          8326:            output=${output_objdir}/${output_la}.lnkscript
        !          8327:            func_verbose "creating GNU ld script: $output"
        !          8328:            echo 'INPUT (' > $output
        !          8329:            for obj in $save_libobjs
        !          8330:            do
        !          8331:              func_to_tool_file "$obj"
        !          8332:              $ECHO "$func_to_tool_file_result" >> $output
        !          8333:            done
        !          8334:            echo ')' >> $output
        !          8335:            func_append delfiles " $output"
        !          8336:            func_to_tool_file "$output"
        !          8337:            output=$func_to_tool_file_result
        !          8338:          elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
        !          8339:            output=${output_objdir}/${output_la}.lnk
        !          8340:            func_verbose "creating linker input file list: $output"
        !          8341:            : > $output
        !          8342:            set x $save_libobjs
        !          8343:            shift
        !          8344:            firstobj=
        !          8345:            if test "$compiler_needs_object" = yes; then
        !          8346:              firstobj="$1 "
        !          8347:              shift
1.1       misho    8348:            fi
1.1.1.2 ! misho    8349:            for obj
        !          8350:            do
        !          8351:              func_to_tool_file "$obj"
        !          8352:              $ECHO "$func_to_tool_file_result" >> $output
1.1       misho    8353:            done
1.1.1.2 ! misho    8354:            func_append delfiles " $output"
        !          8355:            func_to_tool_file "$output"
        !          8356:            output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
        !          8357:          else
        !          8358:            if test -n "$save_libobjs"; then
        !          8359:              func_verbose "creating reloadable object files..."
        !          8360:              output=$output_objdir/$output_la-${k}.$objext
        !          8361:              eval test_cmds=\"$reload_cmds\"
        !          8362:              func_len " $test_cmds"
        !          8363:              len0=$func_len_result
        !          8364:              len=$len0
        !          8365: 
        !          8366:              # Loop over the list of objects to be linked.
        !          8367:              for obj in $save_libobjs
        !          8368:              do
        !          8369:                func_len " $obj"
        !          8370:                func_arith $len + $func_len_result
        !          8371:                len=$func_arith_result
        !          8372:                if test "X$objlist" = X ||
        !          8373:                   test "$len" -lt "$max_cmd_len"; then
        !          8374:                  func_append objlist " $obj"
        !          8375:                else
        !          8376:                  # The command $test_cmds is almost too long, add a
        !          8377:                  # command to the queue.
        !          8378:                  if test "$k" -eq 1 ; then
        !          8379:                    # The first file doesn't have a previous command to add.
        !          8380:                    reload_objs=$objlist
        !          8381:                    eval concat_cmds=\"$reload_cmds\"
        !          8382:                  else
        !          8383:                    # All subsequent reloadable object files will link in
        !          8384:                    # the last one created.
        !          8385:                    reload_objs="$objlist $last_robj"
        !          8386:                    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
        !          8387:                  fi
        !          8388:                  last_robj=$output_objdir/$output_la-${k}.$objext
        !          8389:                  func_arith $k + 1
        !          8390:                  k=$func_arith_result
        !          8391:                  output=$output_objdir/$output_la-${k}.$objext
        !          8392:                  objlist=" $obj"
        !          8393:                  func_len " $last_robj"
        !          8394:                  func_arith $len0 + $func_len_result
        !          8395:                  len=$func_arith_result
        !          8396:                fi
        !          8397:              done
        !          8398:              # Handle the remaining objects by creating one last
        !          8399:              # reloadable object file.  All subsequent reloadable object
        !          8400:              # files will link in the last one created.
        !          8401:              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
        !          8402:              reload_objs="$objlist $last_robj"
        !          8403:              eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
        !          8404:              if test -n "$last_robj"; then
        !          8405:                eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
1.1       misho    8406:              fi
1.1.1.2 ! misho    8407:              func_append delfiles " $output"
        !          8408: 
        !          8409:            else
        !          8410:              output=
        !          8411:            fi
        !          8412: 
        !          8413:            if ${skipped_export-false}; then
        !          8414:              func_verbose "generating symbol list for \`$libname.la'"
        !          8415:              export_symbols="$output_objdir/$libname.exp"
        !          8416:              $opt_dry_run || $RM $export_symbols
        !          8417:              libobjs=$output
        !          8418:              # Append the command to create the export file.
        !          8419:              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
        !          8420:              eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
        !          8421:              if test -n "$last_robj"; then
        !          8422:                eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
1.1       misho    8423:              fi
1.1.1.2 ! misho    8424:            fi
        !          8425: 
        !          8426:            test -n "$save_libobjs" &&
        !          8427:              func_verbose "creating a temporary reloadable object file: $output"
        !          8428: 
        !          8429:            # Loop through the commands generated above and execute them.
        !          8430:            save_ifs="$IFS"; IFS='~'
        !          8431:            for cmd in $concat_cmds; do
        !          8432:              IFS="$save_ifs"
        !          8433:              $opt_silent || {
        !          8434:                  func_quote_for_expand "$cmd"
        !          8435:                  eval "func_echo $func_quote_for_expand_result"
        !          8436:              }
        !          8437:              $opt_dry_run || eval "$cmd" || {
        !          8438:                lt_exit=$?
        !          8439: 
        !          8440:                # Restore the uninstalled library and exit
        !          8441:                if test "$opt_mode" = relink; then
        !          8442:                  ( cd "$output_objdir" && \
        !          8443:                    $RM "${realname}T" && \
        !          8444:                    $MV "${realname}U" "$realname" )
        !          8445:                fi
        !          8446: 
        !          8447:                exit $lt_exit
        !          8448:              }
1.1       misho    8449:            done
1.1.1.2 ! misho    8450:            IFS="$save_ifs"
        !          8451: 
        !          8452:            if test -n "$export_symbols_regex" && ${skipped_export-false}; then
        !          8453:              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
        !          8454:              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
        !          8455:            fi
        !          8456:          fi
        !          8457: 
        !          8458:           if ${skipped_export-false}; then
        !          8459:            if test -n "$export_symbols" && test -n "$include_expsyms"; then
        !          8460:              tmp_export_symbols="$export_symbols"
        !          8461:              test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
        !          8462:              $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
        !          8463:            fi
        !          8464: 
        !          8465:            if test -n "$orig_export_symbols"; then
        !          8466:              # The given exports_symbols file has to be filtered, so filter it.
        !          8467:              func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
        !          8468:              # FIXME: $output_objdir/$libname.filter potentially contains lots of
        !          8469:              # 's' commands which not all seds can handle. GNU sed should be fine
        !          8470:              # though. Also, the filter scales superlinearly with the number of
        !          8471:              # global variables. join(1) would be nice here, but unfortunately
        !          8472:              # isn't a blessed tool.
        !          8473:              $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
        !          8474:              func_append delfiles " $export_symbols $output_objdir/$libname.filter"
        !          8475:              export_symbols=$output_objdir/$libname.def
        !          8476:              $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
        !          8477:            fi
        !          8478:          fi
        !          8479: 
        !          8480:          libobjs=$output
        !          8481:          # Restore the value of output.
        !          8482:          output=$save_output
        !          8483: 
        !          8484:          if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
        !          8485:            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
        !          8486:            test "X$libobjs" = "X " && libobjs=
        !          8487:          fi
        !          8488:          # Expand the library linking commands again to reset the
        !          8489:          # value of $libobjs for piecewise linking.
        !          8490: 
        !          8491:          # Do each of the archive commands.
        !          8492:          if test "$module" = yes && test -n "$module_cmds" ; then
        !          8493:            if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
        !          8494:              cmds=$module_expsym_cmds
        !          8495:            else
        !          8496:              cmds=$module_cmds
        !          8497:            fi
1.1       misho    8498:          else
1.1.1.2 ! misho    8499:            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
        !          8500:              cmds=$archive_expsym_cmds
        !          8501:            else
        !          8502:              cmds=$archive_cmds
        !          8503:            fi
1.1       misho    8504:          fi
1.1.1.2 ! misho    8505:        fi
1.1       misho    8506: 
1.1.1.2 ! misho    8507:        if test -n "$delfiles"; then
        !          8508:          # Append the command to remove temporary files to $cmds.
        !          8509:          eval cmds=\"\$cmds~\$RM $delfiles\"
        !          8510:        fi
1.1       misho    8511: 
1.1.1.2 ! misho    8512:        # Add any objects from preloaded convenience libraries
        !          8513:        if test -n "$dlprefiles"; then
        !          8514:          gentop="$output_objdir/${outputname}x"
        !          8515:          func_append generated " $gentop"
1.1       misho    8516: 
1.1.1.2 ! misho    8517:          func_extract_archives $gentop $dlprefiles
        !          8518:          func_append libobjs " $func_extract_archives_result"
        !          8519:          test "X$libobjs" = "X " && libobjs=
        !          8520:        fi
1.1       misho    8521: 
1.1.1.2 ! misho    8522:        save_ifs="$IFS"; IFS='~'
        !          8523:        for cmd in $cmds; do
        !          8524:          IFS="$save_ifs"
        !          8525:          eval cmd=\"$cmd\"
        !          8526:          $opt_silent || {
        !          8527:            func_quote_for_expand "$cmd"
        !          8528:            eval "func_echo $func_quote_for_expand_result"
        !          8529:          }
        !          8530:          $opt_dry_run || eval "$cmd" || {
        !          8531:            lt_exit=$?
1.1       misho    8532: 
1.1.1.2 ! misho    8533:            # Restore the uninstalled library and exit
        !          8534:            if test "$opt_mode" = relink; then
        !          8535:              ( cd "$output_objdir" && \
        !          8536:                $RM "${realname}T" && \
        !          8537:                $MV "${realname}U" "$realname" )
        !          8538:            fi
1.1       misho    8539: 
1.1.1.2 ! misho    8540:            exit $lt_exit
        !          8541:          }
        !          8542:        done
        !          8543:        IFS="$save_ifs"
1.1       misho    8544: 
1.1.1.2 ! misho    8545:        # Restore the uninstalled library and exit
        !          8546:        if test "$opt_mode" = relink; then
        !          8547:          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
        !          8548: 
        !          8549:          if test -n "$convenience"; then
        !          8550:            if test -z "$whole_archive_flag_spec"; then
        !          8551:              func_show_eval '${RM}r "$gentop"'
        !          8552:            fi
        !          8553:          fi
1.1       misho    8554: 
1.1.1.2 ! misho    8555:          exit $EXIT_SUCCESS
        !          8556:        fi
1.1       misho    8557: 
1.1.1.2 ! misho    8558:        # Create links to the real library.
        !          8559:        for linkname in $linknames; do
        !          8560:          if test "$realname" != "$linkname"; then
        !          8561:            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
1.1       misho    8562:          fi
                   8563:        done
                   8564: 
1.1.1.2 ! misho    8565:        # If -module or -export-dynamic was specified, set the dlname.
        !          8566:        if test "$module" = yes || test "$export_dynamic" = yes; then
        !          8567:          # On all known operating systems, these are identical.
        !          8568:          dlname="$soname"
        !          8569:        fi
        !          8570:       fi
1.1       misho    8571:       ;;
                   8572: 
1.1.1.2 ! misho    8573:     obj)
        !          8574:       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
        !          8575:        func_warning "\`-dlopen' is ignored for objects"
        !          8576:       fi
1.1       misho    8577: 
1.1.1.2 ! misho    8578:       case " $deplibs" in
        !          8579:       *\ -l* | *\ -L*)
        !          8580:        func_warning "\`-l' and \`-L' are ignored for objects" ;;
1.1       misho    8581:       esac
                   8582: 
1.1.1.2 ! misho    8583:       test -n "$rpath" && \
        !          8584:        func_warning "\`-rpath' is ignored for objects"
1.1       misho    8585: 
1.1.1.2 ! misho    8586:       test -n "$xrpath" && \
        !          8587:        func_warning "\`-R' is ignored for objects"
1.1       misho    8588: 
1.1.1.2 ! misho    8589:       test -n "$vinfo" && \
        !          8590:        func_warning "\`-version-info' is ignored for objects"
        !          8591: 
        !          8592:       test -n "$release" && \
        !          8593:        func_warning "\`-release' is ignored for objects"
        !          8594: 
        !          8595:       case $output in
        !          8596:       *.lo)
        !          8597:        test -n "$objs$old_deplibs" && \
        !          8598:          func_fatal_error "cannot build library object \`$output' from non-libtool objects"
        !          8599: 
        !          8600:        libobj=$output
        !          8601:        func_lo2o "$libobj"
        !          8602:        obj=$func_lo2o_result
1.1       misho    8603:        ;;
                   8604:       *)
1.1.1.2 ! misho    8605:        libobj=
        !          8606:        obj="$output"
1.1       misho    8607:        ;;
                   8608:       esac
                   8609: 
1.1.1.2 ! misho    8610:       # Delete the old objects.
        !          8611:       $opt_dry_run || $RM $obj $libobj
1.1       misho    8612: 
1.1.1.2 ! misho    8613:       # Objects from convenience libraries.  This assumes
        !          8614:       # single-version convenience libraries.  Whenever we create
        !          8615:       # different ones for PIC/non-PIC, this we'll have to duplicate
        !          8616:       # the extraction.
        !          8617:       reload_conv_objs=
        !          8618:       gentop=
        !          8619:       # reload_cmds runs $LD directly, so let us get rid of
        !          8620:       # -Wl from whole_archive_flag_spec and hope we can get by with
        !          8621:       # turning comma into space..
        !          8622:       wl=
1.1       misho    8623: 
1.1.1.2 ! misho    8624:       if test -n "$convenience"; then
        !          8625:        if test -n "$whole_archive_flag_spec"; then
        !          8626:          eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
        !          8627:          reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
        !          8628:        else
        !          8629:          gentop="$output_objdir/${obj}x"
        !          8630:          func_append generated " $gentop"
1.1       misho    8631: 
1.1.1.2 ! misho    8632:          func_extract_archives $gentop $convenience
        !          8633:          reload_conv_objs="$reload_objs $func_extract_archives_result"
        !          8634:        fi
1.1       misho    8635:       fi
                   8636: 
1.1.1.2 ! misho    8637:       # If we're not building shared, we need to use non_pic_objs
        !          8638:       test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
1.1       misho    8639: 
1.1.1.2 ! misho    8640:       # Create the old-style object.
        !          8641:       reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
1.1       misho    8642: 
1.1.1.2 ! misho    8643:       output="$obj"
        !          8644:       func_execute_cmds "$reload_cmds" 'exit $?'
        !          8645: 
        !          8646:       # Exit if we aren't doing a library object file.
        !          8647:       if test -z "$libobj"; then
        !          8648:        if test -n "$gentop"; then
        !          8649:          func_show_eval '${RM}r "$gentop"'
        !          8650:        fi
        !          8651: 
        !          8652:        exit $EXIT_SUCCESS
1.1       misho    8653:       fi
1.1.1.2 ! misho    8654: 
        !          8655:       if test "$build_libtool_libs" != yes; then
        !          8656:        if test -n "$gentop"; then
        !          8657:          func_show_eval '${RM}r "$gentop"'
        !          8658:        fi
        !          8659: 
        !          8660:        # Create an invalid libtool object if no PIC, so that we don't
        !          8661:        # accidentally link it into a program.
        !          8662:        # $show "echo timestamp > $libobj"
        !          8663:        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
        !          8664:        exit $EXIT_SUCCESS
        !          8665:       fi
        !          8666: 
        !          8667:       if test -n "$pic_flag" || test "$pic_mode" != default; then
        !          8668:        # Only do commands if we really have different PIC objects.
        !          8669:        reload_objs="$libobjs $reload_conv_objs"
        !          8670:        output="$libobj"
        !          8671:        func_execute_cmds "$reload_cmds" 'exit $?'
        !          8672:       fi
        !          8673: 
        !          8674:       if test -n "$gentop"; then
        !          8675:        func_show_eval '${RM}r "$gentop"'
        !          8676:       fi
        !          8677: 
        !          8678:       exit $EXIT_SUCCESS
1.1       misho    8679:       ;;
                   8680: 
1.1.1.2 ! misho    8681:     prog)
        !          8682:       case $host in
        !          8683:        *cygwin*) func_stripname '' '.exe' "$output"
        !          8684:                  output=$func_stripname_result.exe;;
        !          8685:       esac
        !          8686:       test -n "$vinfo" && \
        !          8687:        func_warning "\`-version-info' is ignored for programs"
1.1       misho    8688: 
1.1.1.2 ! misho    8689:       test -n "$release" && \
        !          8690:        func_warning "\`-release' is ignored for programs"
1.1       misho    8691: 
1.1.1.2 ! misho    8692:       test "$preload" = yes \
        !          8693:         && test "$dlopen_support" = unknown \
        !          8694:        && test "$dlopen_self" = unknown \
        !          8695:        && test "$dlopen_self_static" = unknown && \
        !          8696:          func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
        !          8697: 
        !          8698:       case $host in
        !          8699:       *-*-rhapsody* | *-*-darwin1.[012])
        !          8700:        # On Rhapsody replace the C library is the System framework
        !          8701:        compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
        !          8702:        finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
1.1       misho    8703:        ;;
1.1.1.2 ! misho    8704:       esac
1.1       misho    8705: 
1.1.1.2 ! misho    8706:       case $host in
        !          8707:       *-*-darwin*)
        !          8708:        # Don't allow lazy linking, it breaks C++ global constructors
        !          8709:        # But is supposedly fixed on 10.4 or later (yay!).
        !          8710:        if test "$tagname" = CXX ; then
        !          8711:          case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
        !          8712:            10.[0123])
        !          8713:              func_append compile_command " ${wl}-bind_at_load"
        !          8714:              func_append finalize_command " ${wl}-bind_at_load"
        !          8715:            ;;
        !          8716:          esac
1.1       misho    8717:        fi
1.1.1.2 ! misho    8718:        # Time to change all our "foo.ltframework" stuff back to "-framework foo"
        !          8719:        compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          8720:        finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        !          8721:        ;;
        !          8722:       esac
1.1       misho    8723: 
1.1.1.2 ! misho    8724: 
        !          8725:       # move library search paths that coincide with paths to not yet
        !          8726:       # installed libraries to the beginning of the library search list
        !          8727:       new_libs=
        !          8728:       for path in $notinst_path; do
        !          8729:        case " $new_libs " in
        !          8730:        *" -L$path/$objdir "*) ;;
        !          8731:        *)
        !          8732:          case " $compile_deplibs " in
        !          8733:          *" -L$path/$objdir "*)
        !          8734:            func_append new_libs " -L$path/$objdir" ;;
        !          8735:          esac
        !          8736:          ;;
        !          8737:        esac
        !          8738:       done
        !          8739:       for deplib in $compile_deplibs; do
        !          8740:        case $deplib in
        !          8741:        -L*)
        !          8742:          case " $new_libs " in
        !          8743:          *" $deplib "*) ;;
        !          8744:          *) func_append new_libs " $deplib" ;;
        !          8745:          esac
        !          8746:          ;;
        !          8747:        *) func_append new_libs " $deplib" ;;
1.1       misho    8748:        esac
1.1.1.2 ! misho    8749:       done
        !          8750:       compile_deplibs="$new_libs"
1.1       misho    8751: 
1.1.1.2 ! misho    8752: 
        !          8753:       func_append compile_command " $compile_deplibs"
        !          8754:       func_append finalize_command " $finalize_deplibs"
        !          8755: 
        !          8756:       if test -n "$rpath$xrpath"; then
        !          8757:        # If the user specified any rpath flags, then add them.
        !          8758:        for libdir in $rpath $xrpath; do
        !          8759:          # This is the magic to use -rpath.
        !          8760:          case "$finalize_rpath " in
1.1       misho    8761:          *" $libdir "*) ;;
1.1.1.2 ! misho    8762:          *) func_append finalize_rpath " $libdir" ;;
1.1       misho    8763:          esac
1.1.1.2 ! misho    8764:        done
        !          8765:       fi
        !          8766: 
        !          8767:       # Now hardcode the library paths
        !          8768:       rpath=
        !          8769:       hardcode_libdirs=
        !          8770:       for libdir in $compile_rpath $finalize_rpath; do
        !          8771:        if test -n "$hardcode_libdir_flag_spec"; then
        !          8772:          if test -n "$hardcode_libdir_separator"; then
        !          8773:            if test -z "$hardcode_libdirs"; then
        !          8774:              hardcode_libdirs="$libdir"
        !          8775:            else
        !          8776:              # Just accumulate the unique libdirs.
        !          8777:              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
        !          8778:              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
        !          8779:                ;;
        !          8780:              *)
        !          8781:                func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
        !          8782:                ;;
        !          8783:              esac
        !          8784:            fi
        !          8785:          else
        !          8786:            eval flag=\"$hardcode_libdir_flag_spec\"
        !          8787:            func_append rpath " $flag"
        !          8788:          fi
        !          8789:        elif test -n "$runpath_var"; then
        !          8790:          case "$perm_rpath " in
1.1       misho    8791:          *" $libdir "*) ;;
1.1.1.2 ! misho    8792:          *) func_append perm_rpath " $libdir" ;;
1.1       misho    8793:          esac
                   8794:        fi
1.1.1.2 ! misho    8795:        case $host in
        !          8796:        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
        !          8797:          testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
        !          8798:          case :$dllsearchpath: in
        !          8799:          *":$libdir:"*) ;;
        !          8800:          ::) dllsearchpath=$libdir;;
        !          8801:          *) func_append dllsearchpath ":$libdir";;
        !          8802:          esac
        !          8803:          case :$dllsearchpath: in
        !          8804:          *":$testbindir:"*) ;;
        !          8805:          ::) dllsearchpath=$testbindir;;
        !          8806:          *) func_append dllsearchpath ":$testbindir";;
        !          8807:          esac
        !          8808:          ;;
        !          8809:        esac
        !          8810:       done
        !          8811:       # Substitute the hardcoded libdirs into the rpath.
        !          8812:       if test -n "$hardcode_libdir_separator" &&
        !          8813:         test -n "$hardcode_libdirs"; then
        !          8814:        libdir="$hardcode_libdirs"
        !          8815:        eval rpath=\" $hardcode_libdir_flag_spec\"
        !          8816:       fi
        !          8817:       compile_rpath="$rpath"
1.1       misho    8818: 
1.1.1.2 ! misho    8819:       rpath=
        !          8820:       hardcode_libdirs=
        !          8821:       for libdir in $finalize_rpath; do
        !          8822:        if test -n "$hardcode_libdir_flag_spec"; then
        !          8823:          if test -n "$hardcode_libdir_separator"; then
        !          8824:            if test -z "$hardcode_libdirs"; then
        !          8825:              hardcode_libdirs="$libdir"
        !          8826:            else
        !          8827:              # Just accumulate the unique libdirs.
        !          8828:              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
        !          8829:              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
        !          8830:                ;;
        !          8831:              *)
        !          8832:                func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
        !          8833:                ;;
        !          8834:              esac
        !          8835:            fi
1.1       misho    8836:          else
1.1.1.2 ! misho    8837:            eval flag=\"$hardcode_libdir_flag_spec\"
        !          8838:            func_append rpath " $flag"
1.1       misho    8839:          fi
1.1.1.2 ! misho    8840:        elif test -n "$runpath_var"; then
        !          8841:          case "$finalize_perm_rpath " in
        !          8842:          *" $libdir "*) ;;
        !          8843:          *) func_append finalize_perm_rpath " $libdir" ;;
        !          8844:          esac
1.1       misho    8845:        fi
1.1.1.2 ! misho    8846:       done
        !          8847:       # Substitute the hardcoded libdirs into the rpath.
        !          8848:       if test -n "$hardcode_libdir_separator" &&
        !          8849:         test -n "$hardcode_libdirs"; then
        !          8850:        libdir="$hardcode_libdirs"
        !          8851:        eval rpath=\" $hardcode_libdir_flag_spec\"
        !          8852:       fi
        !          8853:       finalize_rpath="$rpath"
1.1       misho    8854: 
1.1.1.2 ! misho    8855:       if test -n "$libobjs" && test "$build_old_libs" = yes; then
        !          8856:        # Transform all the library objects into standard objects.
        !          8857:        compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
        !          8858:        finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
        !          8859:       fi
1.1       misho    8860: 
1.1.1.2 ! misho    8861:       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
1.1       misho    8862: 
1.1.1.2 ! misho    8863:       # template prelinking step
        !          8864:       if test -n "$prelink_cmds"; then
        !          8865:        func_execute_cmds "$prelink_cmds" 'exit $?'
        !          8866:       fi
1.1       misho    8867: 
1.1.1.2 ! misho    8868:       wrappers_required=yes
        !          8869:       case $host in
        !          8870:       *cegcc* | *mingw32ce*)
        !          8871:         # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
        !          8872:         wrappers_required=no
        !          8873:         ;;
        !          8874:       *cygwin* | *mingw* )
        !          8875:         if test "$build_libtool_libs" != yes; then
        !          8876:           wrappers_required=no
        !          8877:         fi
        !          8878:         ;;
        !          8879:       *)
        !          8880:         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
        !          8881:           wrappers_required=no
        !          8882:         fi
        !          8883:         ;;
        !          8884:       esac
        !          8885:       if test "$wrappers_required" = no; then
        !          8886:        # Replace the output file specification.
        !          8887:        compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
        !          8888:        link_command="$compile_command$compile_rpath"
1.1       misho    8889: 
1.1.1.2 ! misho    8890:        # We have no uninstalled library dependencies, so finalize right now.
        !          8891:        exit_status=0
        !          8892:        func_show_eval "$link_command" 'exit_status=$?'
1.1       misho    8893: 
1.1.1.2 ! misho    8894:        if test -n "$postlink_cmds"; then
        !          8895:          func_to_tool_file "$output"
        !          8896:          postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
        !          8897:          func_execute_cmds "$postlink_cmds" 'exit $?'
1.1       misho    8898:        fi
                   8899: 
1.1.1.2 ! misho    8900:        # Delete the generated files.
        !          8901:        if test -f "$output_objdir/${outputname}S.${objext}"; then
        !          8902:          func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
        !          8903:        fi
1.1       misho    8904: 
1.1.1.2 ! misho    8905:        exit $exit_status
        !          8906:       fi
1.1       misho    8907: 
1.1.1.2 ! misho    8908:       if test -n "$compile_shlibpath$finalize_shlibpath"; then
        !          8909:        compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
        !          8910:       fi
        !          8911:       if test -n "$finalize_shlibpath"; then
        !          8912:        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
        !          8913:       fi
1.1       misho    8914: 
1.1.1.2 ! misho    8915:       compile_var=
        !          8916:       finalize_var=
        !          8917:       if test -n "$runpath_var"; then
        !          8918:        if test -n "$perm_rpath"; then
        !          8919:          # We should set the runpath_var.
        !          8920:          rpath=
        !          8921:          for dir in $perm_rpath; do
        !          8922:            func_append rpath "$dir:"
        !          8923:          done
        !          8924:          compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
1.1       misho    8925:        fi
1.1.1.2 ! misho    8926:        if test -n "$finalize_perm_rpath"; then
        !          8927:          # We should set the runpath_var.
        !          8928:          rpath=
        !          8929:          for dir in $finalize_perm_rpath; do
        !          8930:            func_append rpath "$dir:"
        !          8931:          done
        !          8932:          finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
1.1       misho    8933:        fi
1.1.1.2 ! misho    8934:       fi
1.1       misho    8935: 
1.1.1.2 ! misho    8936:       if test "$no_install" = yes; then
        !          8937:        # We don't need to create a wrapper script.
        !          8938:        link_command="$compile_var$compile_command$compile_rpath"
        !          8939:        # Replace the output file specification.
        !          8940:        link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
        !          8941:        # Delete the old output file.
        !          8942:        $opt_dry_run || $RM $output
        !          8943:        # Link the executable and exit
        !          8944:        func_show_eval "$link_command" 'exit $?'
1.1       misho    8945: 
1.1.1.2 ! misho    8946:        if test -n "$postlink_cmds"; then
        !          8947:          func_to_tool_file "$output"
        !          8948:          postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
        !          8949:          func_execute_cmds "$postlink_cmds" 'exit $?'
1.1       misho    8950:        fi
1.1.1.2 ! misho    8951: 
1.1       misho    8952:        exit $EXIT_SUCCESS
1.1.1.2 ! misho    8953:       fi
1.1       misho    8954: 
1.1.1.2 ! misho    8955:       if test "$hardcode_action" = relink; then
        !          8956:        # Fast installation is not supported
        !          8957:        link_command="$compile_var$compile_command$compile_rpath"
        !          8958:        relink_command="$finalize_var$finalize_command$finalize_rpath"
        !          8959: 
        !          8960:        func_warning "this platform does not like uninstalled shared libraries"
        !          8961:        func_warning "\`$output' will be relinked during installation"
        !          8962:       else
        !          8963:        if test "$fast_install" != no; then
        !          8964:          link_command="$finalize_var$compile_command$finalize_rpath"
        !          8965:          if test "$fast_install" = yes; then
        !          8966:            relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
        !          8967:          else
        !          8968:            # fast_install is set to needless
        !          8969:            relink_command=
        !          8970:          fi
1.1       misho    8971:        else
1.1.1.2 ! misho    8972:          link_command="$compile_var$compile_command$compile_rpath"
        !          8973:          relink_command="$finalize_var$finalize_command$finalize_rpath"
1.1       misho    8974:        fi
1.1.1.2 ! misho    8975:       fi
1.1       misho    8976: 
1.1.1.2 ! misho    8977:       # Replace the output file specification.
        !          8978:       link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
1.1       misho    8979: 
1.1.1.2 ! misho    8980:       # Delete the old output files.
        !          8981:       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
1.1       misho    8982: 
1.1.1.2 ! misho    8983:       func_show_eval "$link_command" 'exit $?'
1.1       misho    8984: 
1.1.1.2 ! misho    8985:       if test -n "$postlink_cmds"; then
        !          8986:        func_to_tool_file "$output_objdir/$outputname"
        !          8987:        postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
        !          8988:        func_execute_cmds "$postlink_cmds" 'exit $?'
        !          8989:       fi
1.1       misho    8990: 
1.1.1.2 ! misho    8991:       # Now create the wrapper script.
        !          8992:       func_verbose "creating $output"
1.1       misho    8993: 
1.1.1.2 ! misho    8994:       # Quote the relink command for shipping.
        !          8995:       if test -n "$relink_command"; then
        !          8996:        # Preserve any variables that may affect compiler behavior
        !          8997:        for var in $variables_saved_for_relink; do
        !          8998:          if eval test -z \"\${$var+set}\"; then
        !          8999:            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
        !          9000:          elif eval var_value=\$$var; test -z "$var_value"; then
        !          9001:            relink_command="$var=; export $var; $relink_command"
        !          9002:          else
        !          9003:            func_quote_for_eval "$var_value"
        !          9004:            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
        !          9005:          fi
        !          9006:        done
        !          9007:        relink_command="(cd `pwd`; $relink_command)"
        !          9008:        relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
        !          9009:       fi
1.1       misho    9010: 
1.1.1.2 ! misho    9011:       # Only actually do things if not in dry run mode.
        !          9012:       $opt_dry_run || {
        !          9013:        # win32 will think the script is a binary if it has
        !          9014:        # a .exe suffix, so we strip it off here.
        !          9015:        case $output in
        !          9016:          *.exe) func_stripname '' '.exe' "$output"
        !          9017:                 output=$func_stripname_result ;;
        !          9018:        esac
        !          9019:        # test for cygwin because mv fails w/o .exe extensions
        !          9020:        case $host in
        !          9021:          *cygwin*)
        !          9022:            exeext=.exe
        !          9023:            func_stripname '' '.exe' "$outputname"
        !          9024:            outputname=$func_stripname_result ;;
        !          9025:          *) exeext= ;;
        !          9026:        esac
        !          9027:        case $host in
        !          9028:          *cygwin* | *mingw* )
        !          9029:            func_dirname_and_basename "$output" "" "."
        !          9030:            output_name=$func_basename_result
        !          9031:            output_path=$func_dirname_result
        !          9032:            cwrappersource="$output_path/$objdir/lt-$output_name.c"
        !          9033:            cwrapper="$output_path/$output_name.exe"
        !          9034:            $RM $cwrappersource $cwrapper
        !          9035:            trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
        !          9036: 
        !          9037:            func_emit_cwrapperexe_src > $cwrappersource
        !          9038: 
        !          9039:            # The wrapper executable is built using the $host compiler,
        !          9040:            # because it contains $host paths and files. If cross-
        !          9041:            # compiling, it, like the target executable, must be
        !          9042:            # executed on the $host or under an emulation environment.
        !          9043:            $opt_dry_run || {
        !          9044:              $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
        !          9045:              $STRIP $cwrapper
        !          9046:            }
1.1       misho    9047: 
1.1.1.2 ! misho    9048:            # Now, create the wrapper script for func_source use:
        !          9049:            func_ltwrapper_scriptname $cwrapper
        !          9050:            $RM $func_ltwrapper_scriptname_result
        !          9051:            trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
        !          9052:            $opt_dry_run || {
        !          9053:              # note: this script will not be executed, so do not chmod.
        !          9054:              if test "x$build" = "x$host" ; then
        !          9055:                $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
1.1       misho    9056:              else
1.1.1.2 ! misho    9057:                func_emit_wrapper no > $func_ltwrapper_scriptname_result
1.1       misho    9058:              fi
1.1.1.2 ! misho    9059:            }
        !          9060:          ;;
        !          9061:          * )
        !          9062:            $RM $output
        !          9063:            trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
1.1       misho    9064: 
1.1.1.2 ! misho    9065:            func_emit_wrapper no > $output
        !          9066:            chmod +x $output
1.1       misho    9067:          ;;
                   9068:        esac
1.1.1.2 ! misho    9069:       }
        !          9070:       exit $EXIT_SUCCESS
        !          9071:       ;;
        !          9072:     esac
1.1       misho    9073: 
1.1.1.2 ! misho    9074:     # See if we need to build an old-fashioned archive.
        !          9075:     for oldlib in $oldlibs; do
1.1       misho    9076: 
1.1.1.2 ! misho    9077:       if test "$build_libtool_libs" = convenience; then
        !          9078:        oldobjs="$libobjs_save $symfileobj"
        !          9079:        addlibs="$convenience"
        !          9080:        build_libtool_libs=no
        !          9081:       else
        !          9082:        if test "$build_libtool_libs" = module; then
        !          9083:          oldobjs="$libobjs_save"
        !          9084:          build_libtool_libs=no
        !          9085:        else
        !          9086:          oldobjs="$old_deplibs $non_pic_objects"
        !          9087:          if test "$preload" = yes && test -f "$symfileobj"; then
        !          9088:            func_append oldobjs " $symfileobj"
        !          9089:          fi
        !          9090:        fi
        !          9091:        addlibs="$old_convenience"
1.1       misho    9092:       fi
                   9093: 
1.1.1.2 ! misho    9094:       if test -n "$addlibs"; then
        !          9095:        gentop="$output_objdir/${outputname}x"
        !          9096:        func_append generated " $gentop"
1.1       misho    9097: 
1.1.1.2 ! misho    9098:        func_extract_archives $gentop $addlibs
        !          9099:        func_append oldobjs " $func_extract_archives_result"
        !          9100:       fi
1.1       misho    9101: 
1.1.1.2 ! misho    9102:       # Do each command in the archive commands.
        !          9103:       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
        !          9104:        cmds=$old_archive_from_new_cmds
        !          9105:       else
1.1       misho    9106: 
1.1.1.2 ! misho    9107:        # Add any objects from preloaded convenience libraries
        !          9108:        if test -n "$dlprefiles"; then
        !          9109:          gentop="$output_objdir/${outputname}x"
        !          9110:          func_append generated " $gentop"
1.1       misho    9111: 
1.1.1.2 ! misho    9112:          func_extract_archives $gentop $dlprefiles
        !          9113:          func_append oldobjs " $func_extract_archives_result"
        !          9114:        fi
1.1       misho    9115: 
1.1.1.2 ! misho    9116:        # POSIX demands no paths to be encoded in archives.  We have
        !          9117:        # to avoid creating archives with duplicate basenames if we
        !          9118:        # might have to extract them afterwards, e.g., when creating a
        !          9119:        # static archive out of a convenience library, or when linking
        !          9120:        # the entirety of a libtool archive into another (currently
        !          9121:        # not supported by libtool).
        !          9122:        if (for obj in $oldobjs
        !          9123:            do
        !          9124:              func_basename "$obj"
        !          9125:              $ECHO "$func_basename_result"
        !          9126:            done | sort | sort -uc >/dev/null 2>&1); then
        !          9127:          :
        !          9128:        else
        !          9129:          echo "copying selected object files to avoid basename conflicts..."
        !          9130:          gentop="$output_objdir/${outputname}x"
        !          9131:          func_append generated " $gentop"
        !          9132:          func_mkdir_p "$gentop"
        !          9133:          save_oldobjs=$oldobjs
        !          9134:          oldobjs=
        !          9135:          counter=1
        !          9136:          for obj in $save_oldobjs
        !          9137:          do
        !          9138:            func_basename "$obj"
        !          9139:            objbase="$func_basename_result"
        !          9140:            case " $oldobjs " in
        !          9141:            " ") oldobjs=$obj ;;
        !          9142:            *[\ /]"$objbase "*)
        !          9143:              while :; do
        !          9144:                # Make sure we don't pick an alternate name that also
        !          9145:                # overlaps.
        !          9146:                newobj=lt$counter-$objbase
        !          9147:                func_arith $counter + 1
        !          9148:                counter=$func_arith_result
        !          9149:                case " $oldobjs " in
        !          9150:                *[\ /]"$newobj "*) ;;
        !          9151:                *) if test ! -f "$gentop/$newobj"; then break; fi ;;
        !          9152:                esac
        !          9153:              done
        !          9154:              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
        !          9155:              func_append oldobjs " $gentop/$newobj"
        !          9156:              ;;
        !          9157:            *) func_append oldobjs " $obj" ;;
        !          9158:            esac
1.1       misho    9159:          done
                   9160:        fi
1.1.1.2 ! misho    9161:        eval cmds=\"$old_archive_cmds\"
1.1       misho    9162: 
1.1.1.2 ! misho    9163:        func_len " $cmds"
        !          9164:        len=$func_len_result
        !          9165:        if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
        !          9166:          cmds=$old_archive_cmds
        !          9167:        elif test -n "$archiver_list_spec"; then
        !          9168:          func_verbose "using command file archive linking..."
        !          9169:          for obj in $oldobjs
        !          9170:          do
        !          9171:            func_to_tool_file "$obj"
        !          9172:            $ECHO "$func_to_tool_file_result"
        !          9173:          done > $output_objdir/$libname.libcmd
        !          9174:          func_to_tool_file "$output_objdir/$libname.libcmd"
        !          9175:          oldobjs=" $archiver_list_spec$func_to_tool_file_result"
        !          9176:          cmds=$old_archive_cmds
        !          9177:        else
        !          9178:          # the command line is too long to link in one step, link in parts
        !          9179:          func_verbose "using piecewise archive linking..."
        !          9180:          save_RANLIB=$RANLIB
        !          9181:          RANLIB=:
        !          9182:          objlist=
        !          9183:          concat_cmds=
        !          9184:          save_oldobjs=$oldobjs
        !          9185:          oldobjs=
        !          9186:          # Is there a better way of finding the last object in the list?
        !          9187:          for obj in $save_oldobjs
        !          9188:          do
        !          9189:            last_oldobj=$obj
        !          9190:          done
        !          9191:          eval test_cmds=\"$old_archive_cmds\"
        !          9192:          func_len " $test_cmds"
        !          9193:          len0=$func_len_result
        !          9194:          len=$len0
        !          9195:          for obj in $save_oldobjs
        !          9196:          do
        !          9197:            func_len " $obj"
        !          9198:            func_arith $len + $func_len_result
        !          9199:            len=$func_arith_result
        !          9200:            func_append objlist " $obj"
        !          9201:            if test "$len" -lt "$max_cmd_len"; then
        !          9202:              :
        !          9203:            else
        !          9204:              # the above command should be used before it gets too long
        !          9205:              oldobjs=$objlist
        !          9206:              if test "$obj" = "$last_oldobj" ; then
        !          9207:                RANLIB=$save_RANLIB
        !          9208:              fi
        !          9209:              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
        !          9210:              eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
        !          9211:              objlist=
        !          9212:              len=$len0
        !          9213:            fi
        !          9214:          done
        !          9215:          RANLIB=$save_RANLIB
        !          9216:          oldobjs=$objlist
        !          9217:          if test "X$oldobjs" = "X" ; then
        !          9218:            eval cmds=\"\$concat_cmds\"
        !          9219:          else
        !          9220:            eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
        !          9221:          fi
        !          9222:        fi
        !          9223:       fi
        !          9224:       func_execute_cmds "$cmds" 'exit $?'
1.1       misho    9225:     done
                   9226: 
1.1.1.2 ! misho    9227:     test -n "$generated" && \
        !          9228:       func_show_eval "${RM}r$generated"
1.1       misho    9229: 
1.1.1.2 ! misho    9230:     # Now create the libtool archive.
        !          9231:     case $output in
        !          9232:     *.la)
        !          9233:       old_library=
        !          9234:       test "$build_old_libs" = yes && old_library="$libname.$libext"
        !          9235:       func_verbose "creating $output"
1.1       misho    9236: 
1.1.1.2 ! misho    9237:       # Preserve any variables that may affect compiler behavior
        !          9238:       for var in $variables_saved_for_relink; do
        !          9239:        if eval test -z \"\${$var+set}\"; then
        !          9240:          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
        !          9241:        elif eval var_value=\$$var; test -z "$var_value"; then
        !          9242:          relink_command="$var=; export $var; $relink_command"
1.1       misho    9243:        else
1.1.1.2 ! misho    9244:          func_quote_for_eval "$var_value"
        !          9245:          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
1.1       misho    9246:        fi
1.1.1.2 ! misho    9247:       done
        !          9248:       # Quote the link command for shipping.
        !          9249:       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
        !          9250:       relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
        !          9251:       if test "$hardcode_automatic" = yes ; then
        !          9252:        relink_command=
        !          9253:       fi
1.1       misho    9254: 
1.1.1.2 ! misho    9255:       # Only create the output if not a dry run.
        !          9256:       $opt_dry_run || {
        !          9257:        for installed in no yes; do
        !          9258:          if test "$installed" = yes; then
        !          9259:            if test -z "$install_libdir"; then
        !          9260:              break
        !          9261:            fi
        !          9262:            output="$output_objdir/$outputname"i
        !          9263:            # Replace all uninstalled libtool libraries with the installed ones
        !          9264:            newdependency_libs=
        !          9265:            for deplib in $dependency_libs; do
        !          9266:              case $deplib in
        !          9267:              *.la)
        !          9268:                func_basename "$deplib"
        !          9269:                name="$func_basename_result"
        !          9270:                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
        !          9271:                test -z "$libdir" && \
        !          9272:                  func_fatal_error "\`$deplib' is not a valid libtool archive"
        !          9273:                func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
        !          9274:                ;;
        !          9275:              -L*)
        !          9276:                func_stripname -L '' "$deplib"
        !          9277:                func_replace_sysroot "$func_stripname_result"
        !          9278:                func_append newdependency_libs " -L$func_replace_sysroot_result"
        !          9279:                ;;
        !          9280:              -R*)
        !          9281:                func_stripname -R '' "$deplib"
        !          9282:                func_replace_sysroot "$func_stripname_result"
        !          9283:                func_append newdependency_libs " -R$func_replace_sysroot_result"
        !          9284:                ;;
        !          9285:              *) func_append newdependency_libs " $deplib" ;;
        !          9286:              esac
        !          9287:            done
        !          9288:            dependency_libs="$newdependency_libs"
        !          9289:            newdlfiles=
        !          9290: 
        !          9291:            for lib in $dlfiles; do
        !          9292:              case $lib in
        !          9293:              *.la)
        !          9294:                func_basename "$lib"
        !          9295:                name="$func_basename_result"
        !          9296:                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
        !          9297:                test -z "$libdir" && \
        !          9298:                  func_fatal_error "\`$lib' is not a valid libtool archive"
        !          9299:                func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
        !          9300:                ;;
        !          9301:              *) func_append newdlfiles " $lib" ;;
        !          9302:              esac
        !          9303:            done
        !          9304:            dlfiles="$newdlfiles"
        !          9305:            newdlprefiles=
        !          9306:            for lib in $dlprefiles; do
        !          9307:              case $lib in
        !          9308:              *.la)
        !          9309:                # Only pass preopened files to the pseudo-archive (for
        !          9310:                # eventual linking with the app. that links it) if we
        !          9311:                # didn't already link the preopened objects directly into
        !          9312:                # the library:
        !          9313:                func_basename "$lib"
        !          9314:                name="$func_basename_result"
        !          9315:                eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
        !          9316:                test -z "$libdir" && \
        !          9317:                  func_fatal_error "\`$lib' is not a valid libtool archive"
        !          9318:                func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
        !          9319:                ;;
        !          9320:              esac
        !          9321:            done
        !          9322:            dlprefiles="$newdlprefiles"
        !          9323:          else
        !          9324:            newdlfiles=
        !          9325:            for lib in $dlfiles; do
        !          9326:              case $lib in
        !          9327:                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
        !          9328:                *) abs=`pwd`"/$lib" ;;
        !          9329:              esac
        !          9330:              func_append newdlfiles " $abs"
        !          9331:            done
        !          9332:            dlfiles="$newdlfiles"
        !          9333:            newdlprefiles=
        !          9334:            for lib in $dlprefiles; do
        !          9335:              case $lib in
        !          9336:                [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
        !          9337:                *) abs=`pwd`"/$lib" ;;
        !          9338:              esac
        !          9339:              func_append newdlprefiles " $abs"
        !          9340:            done
        !          9341:            dlprefiles="$newdlprefiles"
        !          9342:          fi
        !          9343:          $RM $output
        !          9344:          # place dlname in correct position for cygwin
        !          9345:          # In fact, it would be nice if we could use this code for all target
        !          9346:          # systems that can't hard-code library paths into their executables
        !          9347:          # and that have no shared library path variable independent of PATH,
        !          9348:          # but it turns out we can't easily determine that from inspecting
        !          9349:          # libtool variables, so we have to hard-code the OSs to which it
        !          9350:          # applies here; at the moment, that means platforms that use the PE
        !          9351:          # object format with DLL files.  See the long comment at the top of
        !          9352:          # tests/bindir.at for full details.
        !          9353:          tdlname=$dlname
        !          9354:          case $host,$output,$installed,$module,$dlname in
        !          9355:            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
        !          9356:              # If a -bindir argument was supplied, place the dll there.
        !          9357:              if test "x$bindir" != x ;
        !          9358:              then
        !          9359:                func_relative_path "$install_libdir" "$bindir"
        !          9360:                tdlname=$func_relative_path_result$dlname
        !          9361:              else
        !          9362:                # Otherwise fall back on heuristic.
        !          9363:                tdlname=../bin/$dlname
        !          9364:              fi
        !          9365:              ;;
        !          9366:          esac
        !          9367:          $ECHO > $output "\
        !          9368: # $outputname - a libtool library file
        !          9369: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
        !          9370: #
        !          9371: # Please DO NOT delete this file!
        !          9372: # It is necessary for linking the library.
1.1       misho    9373: 
1.1.1.2 ! misho    9374: # The name that we can dlopen(3).
        !          9375: dlname='$tdlname'
1.1       misho    9376: 
1.1.1.2 ! misho    9377: # Names of this library.
        !          9378: library_names='$library_names'
1.1       misho    9379: 
1.1.1.2 ! misho    9380: # The name of the static archive.
        !          9381: old_library='$old_library'
1.1       misho    9382: 
1.1.1.2 ! misho    9383: # Linker flags that can not go in dependency_libs.
        !          9384: inherited_linker_flags='$new_inherited_linker_flags'
1.1       misho    9385: 
1.1.1.2 ! misho    9386: # Libraries that this one depends upon.
        !          9387: dependency_libs='$dependency_libs'
1.1       misho    9388: 
1.1.1.2 ! misho    9389: # Names of additional weak libraries provided by this library
        !          9390: weak_library_names='$weak_libs'
1.1       misho    9391: 
1.1.1.2 ! misho    9392: # Version information for $libname.
        !          9393: current=$current
        !          9394: age=$age
        !          9395: revision=$revision
1.1       misho    9396: 
1.1.1.2 ! misho    9397: # Is this an already installed library?
        !          9398: installed=$installed
1.1       misho    9399: 
1.1.1.2 ! misho    9400: # Should we warn about portability when linking against -modules?
        !          9401: shouldnotlink=$module
1.1       misho    9402: 
1.1.1.2 ! misho    9403: # Files to dlopen/dlpreopen
        !          9404: dlopen='$dlfiles'
        !          9405: dlpreopen='$dlprefiles'
1.1       misho    9406: 
1.1.1.2 ! misho    9407: # Directory that this library needs to be installed in:
        !          9408: libdir='$install_libdir'"
        !          9409:          if test "$installed" = no && test "$need_relink" = yes; then
        !          9410:            $ECHO >> $output "\
        !          9411: relink_command=\"$relink_command\""
        !          9412:          fi
        !          9413:        done
        !          9414:       }
1.1       misho    9415: 
1.1.1.2 ! misho    9416:       # Do a symbolic link so that the libtool archive can be found in
        !          9417:       # LD_LIBRARY_PATH before the program is installed.
        !          9418:       func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
        !          9419:       ;;
        !          9420:     esac
        !          9421:     exit $EXIT_SUCCESS
        !          9422: }
1.1       misho    9423: 
1.1.1.2 ! misho    9424: { test "$opt_mode" = link || test "$opt_mode" = relink; } &&
        !          9425:     func_mode_link ${1+"$@"}
1.1       misho    9426: 
                   9427: 
1.1.1.2 ! misho    9428: # func_mode_uninstall arg...
        !          9429: func_mode_uninstall ()
        !          9430: {
        !          9431:     $opt_debug
        !          9432:     RM="$nonopt"
1.1       misho    9433:     files=
                   9434:     rmforce=
                   9435:     exit_status=0
                   9436: 
                   9437:     # This variable tells wrapper scripts just to set variables rather
                   9438:     # than running their programs.
                   9439:     libtool_install_magic="$magic"
                   9440: 
                   9441:     for arg
                   9442:     do
                   9443:       case $arg in
1.1.1.2 ! misho    9444:       -f) func_append RM " $arg"; rmforce=yes ;;
        !          9445:       -*) func_append RM " $arg" ;;
        !          9446:       *) func_append files " $arg" ;;
1.1       misho    9447:       esac
                   9448:     done
                   9449: 
1.1.1.2 ! misho    9450:     test -z "$RM" && \
        !          9451:       func_fatal_help "you must specify an RM program"
1.1       misho    9452: 
                   9453:     rmdirs=
                   9454: 
                   9455:     for file in $files; do
1.1.1.2 ! misho    9456:       func_dirname "$file" "" "."
        !          9457:       dir="$func_dirname_result"
        !          9458:       if test "X$dir" = X.; then
        !          9459:        odir="$objdir"
1.1       misho    9460:       else
1.1.1.2 ! misho    9461:        odir="$dir/$objdir"
1.1       misho    9462:       fi
1.1.1.2 ! misho    9463:       func_basename "$file"
        !          9464:       name="$func_basename_result"
        !          9465:       test "$opt_mode" = uninstall && odir="$dir"
1.1       misho    9466: 
1.1.1.2 ! misho    9467:       # Remember odir for removal later, being careful to avoid duplicates
        !          9468:       if test "$opt_mode" = clean; then
1.1       misho    9469:        case " $rmdirs " in
1.1.1.2 ! misho    9470:          *" $odir "*) ;;
        !          9471:          *) func_append rmdirs " $odir" ;;
1.1       misho    9472:        esac
                   9473:       fi
                   9474: 
                   9475:       # Don't error if the file doesn't exist and rm -f was used.
1.1.1.2 ! misho    9476:       if { test -L "$file"; } >/dev/null 2>&1 ||
        !          9477:         { test -h "$file"; } >/dev/null 2>&1 ||
        !          9478:         test -f "$file"; then
1.1       misho    9479:        :
                   9480:       elif test -d "$file"; then
                   9481:        exit_status=1
                   9482:        continue
                   9483:       elif test "$rmforce" = yes; then
                   9484:        continue
                   9485:       fi
                   9486: 
                   9487:       rmfiles="$file"
                   9488: 
                   9489:       case $name in
                   9490:       *.la)
                   9491:        # Possibly a libtool archive, so verify it.
1.1.1.2 ! misho    9492:        if func_lalib_p "$file"; then
        !          9493:          func_source $dir/$name
1.1       misho    9494: 
                   9495:          # Delete the libtool libraries and symlinks.
                   9496:          for n in $library_names; do
1.1.1.2 ! misho    9497:            func_append rmfiles " $odir/$n"
1.1       misho    9498:          done
1.1.1.2 ! misho    9499:          test -n "$old_library" && func_append rmfiles " $odir/$old_library"
1.1       misho    9500: 
1.1.1.2 ! misho    9501:          case "$opt_mode" in
1.1       misho    9502:          clean)
1.1.1.2 ! misho    9503:            case " $library_names " in
1.1       misho    9504:            *" $dlname "*) ;;
1.1.1.2 ! misho    9505:            *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
1.1       misho    9506:            esac
1.1.1.2 ! misho    9507:            test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
1.1       misho    9508:            ;;
                   9509:          uninstall)
                   9510:            if test -n "$library_names"; then
                   9511:              # Do each command in the postuninstall commands.
1.1.1.2 ! misho    9512:              func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
1.1       misho    9513:            fi
                   9514: 
                   9515:            if test -n "$old_library"; then
                   9516:              # Do each command in the old_postuninstall commands.
1.1.1.2 ! misho    9517:              func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
1.1       misho    9518:            fi
                   9519:            # FIXME: should reinstall the best remaining shared library.
                   9520:            ;;
                   9521:          esac
                   9522:        fi
                   9523:        ;;
                   9524: 
                   9525:       *.lo)
                   9526:        # Possibly a libtool object, so verify it.
1.1.1.2 ! misho    9527:        if func_lalib_p "$file"; then
1.1       misho    9528: 
                   9529:          # Read the .lo file
1.1.1.2 ! misho    9530:          func_source $dir/$name
1.1       misho    9531: 
                   9532:          # Add PIC object to the list of files to remove.
1.1.1.2 ! misho    9533:          if test -n "$pic_object" &&
        !          9534:             test "$pic_object" != none; then
        !          9535:            func_append rmfiles " $dir/$pic_object"
1.1       misho    9536:          fi
                   9537: 
                   9538:          # Add non-PIC object to the list of files to remove.
1.1.1.2 ! misho    9539:          if test -n "$non_pic_object" &&
        !          9540:             test "$non_pic_object" != none; then
        !          9541:            func_append rmfiles " $dir/$non_pic_object"
1.1       misho    9542:          fi
                   9543:        fi
                   9544:        ;;
                   9545: 
                   9546:       *)
1.1.1.2 ! misho    9547:        if test "$opt_mode" = clean ; then
1.1       misho    9548:          noexename=$name
                   9549:          case $file in
                   9550:          *.exe)
1.1.1.2 ! misho    9551:            func_stripname '' '.exe' "$file"
        !          9552:            file=$func_stripname_result
        !          9553:            func_stripname '' '.exe' "$name"
        !          9554:            noexename=$func_stripname_result
1.1       misho    9555:            # $file with .exe has already been added to rmfiles,
                   9556:            # add $file without .exe
1.1.1.2 ! misho    9557:            func_append rmfiles " $file"
1.1       misho    9558:            ;;
                   9559:          esac
                   9560:          # Do a test to see if this is a libtool program.
1.1.1.2 ! misho    9561:          if func_ltwrapper_p "$file"; then
        !          9562:            if func_ltwrapper_executable_p "$file"; then
        !          9563:              func_ltwrapper_scriptname "$file"
        !          9564:              relink_command=
        !          9565:              func_source $func_ltwrapper_scriptname_result
        !          9566:              func_append rmfiles " $func_ltwrapper_scriptname_result"
        !          9567:            else
        !          9568:              relink_command=
        !          9569:              func_source $dir/$noexename
        !          9570:            fi
1.1       misho    9571: 
                   9572:            # note $name still contains .exe if it was in $file originally
                   9573:            # as does the version of $file that was added into $rmfiles
1.1.1.2 ! misho    9574:            func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
1.1       misho    9575:            if test "$fast_install" = yes && test -n "$relink_command"; then
1.1.1.2 ! misho    9576:              func_append rmfiles " $odir/lt-$name"
1.1       misho    9577:            fi
                   9578:            if test "X$noexename" != "X$name" ; then
1.1.1.2 ! misho    9579:              func_append rmfiles " $odir/lt-${noexename}.c"
1.1       misho    9580:            fi
                   9581:          fi
                   9582:        fi
                   9583:        ;;
                   9584:       esac
1.1.1.2 ! misho    9585:       func_show_eval "$RM $rmfiles" 'exit_status=1'
1.1       misho    9586:     done
                   9587: 
                   9588:     # Try to remove the ${objdir}s in the directories where we deleted files
                   9589:     for dir in $rmdirs; do
                   9590:       if test -d "$dir"; then
1.1.1.2 ! misho    9591:        func_show_eval "rmdir $dir >/dev/null 2>&1"
1.1       misho    9592:       fi
                   9593:     done
                   9594: 
                   9595:     exit $exit_status
1.1.1.2 ! misho    9596: }
1.1       misho    9597: 
1.1.1.2 ! misho    9598: { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
        !          9599:     func_mode_uninstall ${1+"$@"}
1.1       misho    9600: 
1.1.1.2 ! misho    9601: test -z "$opt_mode" && {
        !          9602:   help="$generic_help"
        !          9603:   func_fatal_help "you must specify a MODE"
        !          9604: }
        !          9605: 
        !          9606: test -z "$exec_cmd" && \
        !          9607:   func_fatal_help "invalid operation mode \`$opt_mode'"
1.1       misho    9608: 
                   9609: if test -n "$exec_cmd"; then
1.1.1.2 ! misho    9610:   eval exec "$exec_cmd"
1.1       misho    9611:   exit $EXIT_FAILURE
                   9612: fi
                   9613: 
1.1.1.2 ! misho    9614: exit $exit_status
1.1       misho    9615: 
                   9616: 
                   9617: # The TAGs below are defined such that we never get into a situation
                   9618: # in which we disable both kinds of libraries.  Given conflicting
                   9619: # choices, we go for a static library, that is the most portable,
                   9620: # since we can't tell whether shared libraries were disabled because
                   9621: # the user asked for that or because the platform doesn't support
                   9622: # them.  This is particularly important on AIX, because we don't
                   9623: # support having both static and shared libraries enabled at the same
                   9624: # time on that platform, so we default to a shared-only configuration.
                   9625: # If a disable-shared tag is given, we'll fallback to a static-only
                   9626: # configuration.  But we'll never go from static-only to shared-only.
                   9627: 
                   9628: # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
1.1.1.2 ! misho    9629: build_libtool_libs=no
        !          9630: build_old_libs=yes
1.1       misho    9631: # ### END LIBTOOL TAG CONFIG: disable-shared
                   9632: 
                   9633: # ### BEGIN LIBTOOL TAG CONFIG: disable-static
1.1.1.2 ! misho    9634: build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
1.1       misho    9635: # ### END LIBTOOL TAG CONFIG: disable-static
                   9636: 
                   9637: # Local Variables:
                   9638: # mode:shell-script
                   9639: # sh-indentation:2
                   9640: # End:
1.1.1.2 ! misho    9641: # vi:sw=2
        !          9642: 

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>