Annotation of embedaddon/iftop/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.6.3 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
! 5: # Free Software Foundation, Inc.
! 6: # This Makefile.in is free software; the Free Software Foundation
! 7: # gives unlimited permission to copy and/or distribute it,
! 8: # with or without modifications, as long as this notice is preserved.
! 9:
! 10: # This program is distributed in the hope that it will be useful,
! 11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 13: # PARTICULAR PURPOSE.
! 14:
! 15: @SET_MAKE@
! 16:
! 17: #
! 18: # Makefile.am:
! 19: # Automake file for iftop.
! 20: #
! 21: # I don't understand this stuff, so I just stole it from the tpop3d
! 22: # distribution. That means that, really, Mark Longair should take credit for
! 23: # it.
! 24: # -- Chris Lightfoot
! 25: #
! 26: # $Id: Makefile.am,v 1.9 2004/07/27 08:45:17 pdw Exp $
! 27: #
! 28: SHELL = @SHELL@
! 29:
! 30: srcdir = @srcdir@
! 31: top_srcdir = @top_srcdir@
! 32: VPATH = @srcdir@
! 33: prefix = @prefix@
! 34: exec_prefix = @exec_prefix@
! 35:
! 36: bindir = @bindir@
! 37: sbindir = @sbindir@
! 38: libexecdir = @libexecdir@
! 39: datadir = @datadir@
! 40: sysconfdir = @sysconfdir@
! 41: sharedstatedir = @sharedstatedir@
! 42: localstatedir = @localstatedir@
! 43: libdir = @libdir@
! 44: infodir = @infodir@
! 45: mandir = @mandir@
! 46: includedir = @includedir@
! 47: oldincludedir = /usr/include
! 48: pkgdatadir = $(datadir)/@PACKAGE@
! 49: pkglibdir = $(libdir)/@PACKAGE@
! 50: pkgincludedir = $(includedir)/@PACKAGE@
! 51: top_builddir = .
! 52: AUTOCONF = @AUTOCONF@
! 53: AUTOMAKE = @AUTOMAKE@
! 54: AUTOHEADER = @AUTOHEADER@
! 55:
! 56: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 57: INSTALL = @INSTALL@
! 58: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 59: INSTALL_DATA = @INSTALL_DATA@
! 60: install_sh_DATA = $(install_sh) -c -m 644
! 61: install_sh_PROGRAM = $(install_sh) -c
! 62: install_sh_SCRIPT = $(install_sh) -c
! 63: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 64: INSTALL_HEADER = $(INSTALL_DATA)
! 65: transform = @program_transform_name@
! 66: NORMAL_INSTALL = :
! 67: PRE_INSTALL = :
! 68: POST_INSTALL = :
! 69: NORMAL_UNINSTALL = :
! 70: PRE_UNINSTALL = :
! 71: POST_UNINSTALL = :
! 72: build_alias = @build_alias@
! 73: build_triplet = @build@
! 74: host_alias = @host_alias@
! 75: host_triplet = @host@
! 76: target_alias = @target_alias@
! 77: target_triplet = @target@
! 78:
! 79: EXEEXT = @EXEEXT@
! 80: OBJEXT = @OBJEXT@
! 81: PATH_SEPARATOR = @PATH_SEPARATOR@
! 82:
! 83: ACLOCAL = aclocal -I @ac_aux_dir@
! 84: AMTAR = @AMTAR@
! 85: AWK = @AWK@
! 86: CC = @CC@
! 87: DEPDIR = @DEPDIR@
! 88: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 89: PACKAGE = @PACKAGE@
! 90: STRIP = @STRIP@
! 91: VERSION = @VERSION@
! 92: ac_aux_dir = @ac_aux_dir@
! 93: am__include = @am__include@
! 94: am__quote = @am__quote@
! 95: install_sh = @install_sh@
! 96:
! 97: sbin_PROGRAMS = iftop
! 98:
! 99: iftop_SOURCES = addr_hash.c edline.c hash.c iftop.c ns_hash.c \
! 100: options.c resolver.c screenfilter.c serv_hash.c \
! 101: sorted_list.c threadprof.c ui.c util.c \
! 102: addrs_ioctl.c addrs_dlpi.c dlcommon.c \
! 103: stringmap.c cfgfile.c vector.c
! 104:
! 105:
! 106: noinst_HEADERS = addr_hash.h ether.h ethertype.h extract.h hash.h iftop.h \
! 107: integers.h ip.h llc.h ns_hash.h options.h resolver.h \
! 108: screenfilter.h serv_hash.h sll.h sorted_list.h tcp.h \
! 109: threadprof.h token.h ui.h dlcommon.h stringmap.h \
! 110: vector.h cfgfile.h ppp.h
! 111:
! 112:
! 113: man_MANS = iftop.8
! 114:
! 115: SUBDIRS = config
! 116:
! 117: EXTRA_DIST = bootstrap README ChangeLog AUTHORS COPYING INSTALL TODO \
! 118: Makefile.OLD $(man_MANS) iftop.cat iftop.spec
! 119:
! 120:
! 121: MAINTERCLEANFILES = Makefile.in aclocal.m4 configure configuration.h.in \
! 122: stamp-h.in iftop.spec
! 123:
! 124: subdir = .
! 125: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 126: mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
! 127: CONFIG_HEADER = config.h
! 128: CONFIG_CLEAN_FILES =
! 129: sbin_PROGRAMS = iftop$(EXEEXT)
! 130: PROGRAMS = $(sbin_PROGRAMS)
! 131:
! 132: am_iftop_OBJECTS = addr_hash.$(OBJEXT) edline.$(OBJEXT) hash.$(OBJEXT) \
! 133: iftop.$(OBJEXT) ns_hash.$(OBJEXT) options.$(OBJEXT) \
! 134: resolver.$(OBJEXT) screenfilter.$(OBJEXT) serv_hash.$(OBJEXT) \
! 135: sorted_list.$(OBJEXT) threadprof.$(OBJEXT) ui.$(OBJEXT) \
! 136: util.$(OBJEXT) addrs_ioctl.$(OBJEXT) addrs_dlpi.$(OBJEXT) \
! 137: dlcommon.$(OBJEXT) stringmap.$(OBJEXT) cfgfile.$(OBJEXT) \
! 138: vector.$(OBJEXT)
! 139: iftop_OBJECTS = $(am_iftop_OBJECTS)
! 140: iftop_LDADD = $(LDADD)
! 141: iftop_DEPENDENCIES =
! 142: iftop_LDFLAGS =
! 143:
! 144: DEFS = @DEFS@
! 145: DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
! 146: CPPFLAGS = @CPPFLAGS@
! 147: LDFLAGS = @LDFLAGS@
! 148: LIBS = @LIBS@
! 149: depcomp = $(SHELL) $(top_srcdir)/config/depcomp
! 150: am__depfiles_maybe = depfiles
! 151: @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/addr_hash.Po \
! 152: @AMDEP_TRUE@ ./$(DEPDIR)/addrs_dlpi.Po \
! 153: @AMDEP_TRUE@ ./$(DEPDIR)/addrs_ioctl.Po ./$(DEPDIR)/cfgfile.Po \
! 154: @AMDEP_TRUE@ ./$(DEPDIR)/dlcommon.Po ./$(DEPDIR)/edline.Po \
! 155: @AMDEP_TRUE@ ./$(DEPDIR)/hash.Po ./$(DEPDIR)/iftop.Po \
! 156: @AMDEP_TRUE@ ./$(DEPDIR)/ns_hash.Po ./$(DEPDIR)/options.Po \
! 157: @AMDEP_TRUE@ ./$(DEPDIR)/resolver.Po ./$(DEPDIR)/screenfilter.Po \
! 158: @AMDEP_TRUE@ ./$(DEPDIR)/serv_hash.Po ./$(DEPDIR)/sorted_list.Po \
! 159: @AMDEP_TRUE@ ./$(DEPDIR)/stringmap.Po ./$(DEPDIR)/threadprof.Po \
! 160: @AMDEP_TRUE@ ./$(DEPDIR)/ui.Po ./$(DEPDIR)/util.Po \
! 161: @AMDEP_TRUE@ ./$(DEPDIR)/vector.Po
! 162: COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
! 163: $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
! 164: CCLD = $(CC)
! 165: LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
! 166: CFLAGS = @CFLAGS@
! 167: DIST_SOURCES = $(iftop_SOURCES)
! 168:
! 169: NROFF = nroff
! 170: MANS = $(man_MANS)
! 171: HEADERS = $(noinst_HEADERS)
! 172:
! 173:
! 174: RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
! 175: uninstall-info-recursive all-recursive install-data-recursive \
! 176: install-exec-recursive installdirs-recursive install-recursive \
! 177: uninstall-recursive check-recursive installcheck-recursive
! 178: DIST_COMMON = README $(noinst_HEADERS) AUTHORS COPYING ChangeLog \
! 179: INSTALL Makefile.am Makefile.in NEWS TODO aclocal.m4 \
! 180: config.h.in configure configure.in
! 181: DIST_SUBDIRS = $(SUBDIRS)
! 182: SOURCES = $(iftop_SOURCES)
! 183:
! 184: all: config.h
! 185: $(MAKE) $(AM_MAKEFLAGS) all-recursive
! 186:
! 187: .SUFFIXES:
! 188: .SUFFIXES: .c .o .obj
! 189:
! 190: am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
! 191: configure.lineno
! 192: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
! 193: cd $(top_srcdir) && \
! 194: $(AUTOMAKE) --foreign Makefile
! 195: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 196: cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
! 197:
! 198: $(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 199: $(SHELL) ./config.status --recheck
! 200: $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
! 201: cd $(srcdir) && $(AUTOCONF)
! 202:
! 203: $(ACLOCAL_M4): configure.in
! 204: cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
! 205:
! 206: config.h: stamp-h1
! 207: @if test ! -f $@; then \
! 208: rm -f stamp-h1; \
! 209: $(MAKE) stamp-h1; \
! 210: else :; fi
! 211:
! 212: stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
! 213: @rm -f stamp-h1
! 214: cd $(top_builddir) && $(SHELL) ./config.status config.h
! 215:
! 216: $(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
! 217: cd $(top_srcdir) && $(AUTOHEADER)
! 218: touch $(srcdir)/config.h.in
! 219:
! 220: distclean-hdr:
! 221: -rm -f config.h stamp-h1
! 222: sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
! 223: install-sbinPROGRAMS: $(sbin_PROGRAMS)
! 224: @$(NORMAL_INSTALL)
! 225: $(mkinstalldirs) $(DESTDIR)$(sbindir)
! 226: @list='$(sbin_PROGRAMS)'; for p in $$list; do \
! 227: p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
! 228: if test -f $$p \
! 229: ; then \
! 230: f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
! 231: echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) $$p $(DESTDIR)$(sbindir)/$$f"; \
! 232: $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) $$p $(DESTDIR)$(sbindir)/$$f; \
! 233: else :; fi; \
! 234: done
! 235:
! 236: uninstall-sbinPROGRAMS:
! 237: @$(NORMAL_UNINSTALL)
! 238: @list='$(sbin_PROGRAMS)'; for p in $$list; do \
! 239: f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
! 240: echo " rm -f $(DESTDIR)$(sbindir)/$$f"; \
! 241: rm -f $(DESTDIR)$(sbindir)/$$f; \
! 242: done
! 243:
! 244: clean-sbinPROGRAMS:
! 245: -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
! 246: iftop$(EXEEXT): $(iftop_OBJECTS) $(iftop_DEPENDENCIES)
! 247: @rm -f iftop$(EXEEXT)
! 248: $(LINK) $(iftop_LDFLAGS) $(iftop_OBJECTS) $(iftop_LDADD) $(LIBS)
! 249:
! 250: mostlyclean-compile:
! 251: -rm -f *.$(OBJEXT) core *.core
! 252:
! 253: distclean-compile:
! 254: -rm -f *.tab.c
! 255:
! 256: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/addr_hash.Po@am__quote@
! 257: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/addrs_dlpi.Po@am__quote@
! 258: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/addrs_ioctl.Po@am__quote@
! 259: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfgfile.Po@am__quote@
! 260: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dlcommon.Po@am__quote@
! 261: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/edline.Po@am__quote@
! 262: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash.Po@am__quote@
! 263: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iftop.Po@am__quote@
! 264: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ns_hash.Po@am__quote@
! 265: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options.Po@am__quote@
! 266: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/resolver.Po@am__quote@
! 267: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/screenfilter.Po@am__quote@
! 268: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/serv_hash.Po@am__quote@
! 269: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sorted_list.Po@am__quote@
! 270: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stringmap.Po@am__quote@
! 271: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/threadprof.Po@am__quote@
! 272: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ui.Po@am__quote@
! 273: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/util.Po@am__quote@
! 274: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vector.Po@am__quote@
! 275:
! 276: distclean-depend:
! 277: -rm -rf ./$(DEPDIR)
! 278:
! 279: .c.o:
! 280: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
! 281: @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
! 282: @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
! 283: $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
! 284:
! 285: .c.obj:
! 286: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
! 287: @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
! 288: @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
! 289: $(COMPILE) -c `cygpath -w $<`
! 290: CCDEPMODE = @CCDEPMODE@
! 291: uninstall-info-am:
! 292:
! 293: man8dir = $(mandir)/man8
! 294: install-man8: $(man8_MANS) $(man_MANS)
! 295: @$(NORMAL_INSTALL)
! 296: $(mkinstalldirs) $(DESTDIR)$(man8dir)
! 297: @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
! 298: l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
! 299: for i in $$l2; do \
! 300: case "$$i" in \
! 301: *.8*) list="$$list $$i" ;; \
! 302: esac; \
! 303: done; \
! 304: for i in $$list; do \
! 305: if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
! 306: else file=$$i; fi; \
! 307: ext=`echo $$i | sed -e 's/^.*\\.//'`; \
! 308: case "$$ext" in \
! 309: 8*) ;; \
! 310: *) ext='8' ;; \
! 311: esac; \
! 312: inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
! 313: inst=`echo $$inst | sed -e 's/^.*\///'`; \
! 314: inst=`echo $$inst | sed '$(transform)'`.$$ext; \
! 315: echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \
! 316: $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \
! 317: done
! 318: uninstall-man8:
! 319: @$(NORMAL_UNINSTALL)
! 320: @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
! 321: l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
! 322: for i in $$l2; do \
! 323: case "$$i" in \
! 324: *.8*) list="$$list $$i" ;; \
! 325: esac; \
! 326: done; \
! 327: for i in $$list; do \
! 328: ext=`echo $$i | sed -e 's/^.*\\.//'`; \
! 329: inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
! 330: inst=`echo $$inst | sed -e 's/^.*\///'`; \
! 331: inst=`echo $$inst | sed '$(transform)'`.$$ext; \
! 332: echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \
! 333: rm -f $(DESTDIR)$(man8dir)/$$inst; \
! 334: done
! 335:
! 336: # This directory's subdirectories are mostly independent; you can cd
! 337: # into them and run `make' without going through this Makefile.
! 338: # To change the values of `make' variables: instead of editing Makefiles,
! 339: # (1) if the variable is set in `config.status', edit `config.status'
! 340: # (which will cause the Makefiles to be regenerated when you run `make');
! 341: # (2) otherwise, pass the desired values on the `make' command line.
! 342: $(RECURSIVE_TARGETS):
! 343: @set fnord $$MAKEFLAGS; amf=$$2; \
! 344: dot_seen=no; \
! 345: target=`echo $@ | sed s/-recursive//`; \
! 346: list='$(SUBDIRS)'; for subdir in $$list; do \
! 347: echo "Making $$target in $$subdir"; \
! 348: if test "$$subdir" = "."; then \
! 349: dot_seen=yes; \
! 350: local_target="$$target-am"; \
! 351: else \
! 352: local_target="$$target"; \
! 353: fi; \
! 354: (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 355: || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
! 356: done; \
! 357: if test "$$dot_seen" = "no"; then \
! 358: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
! 359: fi; test -z "$$fail"
! 360:
! 361: mostlyclean-recursive clean-recursive distclean-recursive \
! 362: maintainer-clean-recursive:
! 363: @set fnord $$MAKEFLAGS; amf=$$2; \
! 364: dot_seen=no; \
! 365: case "$@" in \
! 366: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! 367: *) list='$(SUBDIRS)' ;; \
! 368: esac; \
! 369: rev=''; for subdir in $$list; do \
! 370: if test "$$subdir" = "."; then :; else \
! 371: rev="$$subdir $$rev"; \
! 372: fi; \
! 373: done; \
! 374: rev="$$rev ."; \
! 375: target=`echo $@ | sed s/-recursive//`; \
! 376: for subdir in $$rev; do \
! 377: echo "Making $$target in $$subdir"; \
! 378: if test "$$subdir" = "."; then \
! 379: local_target="$$target-am"; \
! 380: else \
! 381: local_target="$$target"; \
! 382: fi; \
! 383: (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 384: || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
! 385: done && test -z "$$fail"
! 386: tags-recursive:
! 387: list='$(SUBDIRS)'; for subdir in $$list; do \
! 388: test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
! 389: done
! 390:
! 391: ETAGS = etags
! 392: ETAGSFLAGS =
! 393:
! 394: tags: TAGS
! 395:
! 396: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
! 397: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 398: unique=`for i in $$list; do \
! 399: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 400: done | \
! 401: $(AWK) ' { files[$$0] = 1; } \
! 402: END { for (i in files) print i; }'`; \
! 403: mkid -fID $$unique
! 404:
! 405: TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
! 406: $(TAGS_FILES) $(LISP)
! 407: tags=; \
! 408: here=`pwd`; \
! 409: list='$(SUBDIRS)'; for subdir in $$list; do \
! 410: if test "$$subdir" = .; then :; else \
! 411: test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
! 412: fi; \
! 413: done; \
! 414: list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
! 415: unique=`for i in $$list; do \
! 416: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 417: done | \
! 418: $(AWK) ' { files[$$0] = 1; } \
! 419: END { for (i in files) print i; }'`; \
! 420: test -z "$(ETAGS_ARGS)$$tags$$unique" \
! 421: || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 422: $$tags $$unique
! 423:
! 424: GTAGS:
! 425: here=`$(am__cd) $(top_builddir) && pwd` \
! 426: && cd $(top_srcdir) \
! 427: && gtags -i $(GTAGS_ARGS) $$here
! 428:
! 429: distclean-tags:
! 430: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
! 431: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 432:
! 433: top_distdir = .
! 434: distdir = $(PACKAGE)-$(VERSION)
! 435:
! 436: am__remove_distdir = \
! 437: { test ! -d $(distdir) \
! 438: || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
! 439: && rm -fr $(distdir); }; }
! 440:
! 441: GZIP_ENV = --best
! 442: distcleancheck_listfiles = find . -type f -print
! 443:
! 444: distdir: $(DISTFILES)
! 445: $(am__remove_distdir)
! 446: mkdir $(distdir)
! 447: @list='$(DISTFILES)'; for file in $$list; do \
! 448: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 449: dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
! 450: if test "$$dir" != "$$file" && test "$$dir" != "."; then \
! 451: dir="/$$dir"; \
! 452: $(mkinstalldirs) "$(distdir)$$dir"; \
! 453: else \
! 454: dir=''; \
! 455: fi; \
! 456: if test -d $$d/$$file; then \
! 457: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 458: cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
! 459: fi; \
! 460: cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
! 461: else \
! 462: test -f $(distdir)/$$file \
! 463: || cp -p $$d/$$file $(distdir)/$$file \
! 464: || exit 1; \
! 465: fi; \
! 466: done
! 467: list='$(SUBDIRS)'; for subdir in $$list; do \
! 468: if test "$$subdir" = .; then :; else \
! 469: test -d $(distdir)/$$subdir \
! 470: || mkdir $(distdir)/$$subdir \
! 471: || exit 1; \
! 472: (cd $$subdir && \
! 473: $(MAKE) $(AM_MAKEFLAGS) \
! 474: top_distdir="$(top_distdir)" \
! 475: distdir=../$(distdir)/$$subdir \
! 476: distdir) \
! 477: || exit 1; \
! 478: fi; \
! 479: done
! 480: -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! 481: ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! 482: ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! 483: ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
! 484: || chmod -R a+r $(distdir)
! 485: dist-gzip: distdir
! 486: $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
! 487: $(am__remove_distdir)
! 488:
! 489: dist dist-all: distdir
! 490: $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
! 491: $(am__remove_distdir)
! 492:
! 493: # This target untars the dist file and tries a VPATH configuration. Then
! 494: # it guarantees that the distribution is self-contained by making another
! 495: # tarfile.
! 496: distcheck: dist
! 497: $(am__remove_distdir)
! 498: GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
! 499: chmod -R a-w $(distdir); chmod a+w $(distdir)
! 500: mkdir $(distdir)/=build
! 501: mkdir $(distdir)/=inst
! 502: chmod a-w $(distdir)
! 503: dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
! 504: && cd $(distdir)/=build \
! 505: && ../configure --srcdir=.. --prefix=$$dc_install_base \
! 506: $(DISTCHECK_CONFIGURE_FLAGS) \
! 507: && $(MAKE) $(AM_MAKEFLAGS) \
! 508: && $(MAKE) $(AM_MAKEFLAGS) dvi \
! 509: && $(MAKE) $(AM_MAKEFLAGS) check \
! 510: && $(MAKE) $(AM_MAKEFLAGS) install \
! 511: && $(MAKE) $(AM_MAKEFLAGS) installcheck \
! 512: && $(MAKE) $(AM_MAKEFLAGS) uninstall \
! 513: && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
! 514: || { echo "ERROR: files left after uninstall:" ; \
! 515: find $$dc_install_base -type f -print ; \
! 516: exit 1; } >&2 ) \
! 517: && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
! 518: && rm -f $(distdir).tar.gz \
! 519: && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
! 520: $(am__remove_distdir)
! 521: @echo "$(distdir).tar.gz is ready for distribution" | \
! 522: sed 'h;s/./=/g;p;x;p;x'
! 523: distcleancheck: distclean
! 524: if test '$(srcdir)' = . ; then \
! 525: echo "ERROR: distcleancheck can only run from a VPATH build" ; \
! 526: exit 1 ; \
! 527: fi
! 528: test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
! 529: || { echo "ERROR: files left after distclean:" ; \
! 530: $(distcleancheck_listfiles) ; \
! 531: exit 1; } >&2
! 532: check-am: all-am
! 533: check: check-recursive
! 534: all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) config.h
! 535: installdirs: installdirs-recursive
! 536: installdirs-am:
! 537: $(mkinstalldirs) $(DESTDIR)$(sbindir) $(DESTDIR)$(man8dir)
! 538:
! 539: install: install-recursive
! 540: install-exec: install-exec-recursive
! 541: install-data: install-data-recursive
! 542: uninstall: uninstall-recursive
! 543:
! 544: install-am: all-am
! 545: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 546:
! 547: installcheck: installcheck-recursive
! 548: install-strip:
! 549: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 550: INSTALL_STRIP_FLAG=-s \
! 551: `test -z '$(STRIP)' || \
! 552: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
! 553: mostlyclean-generic:
! 554:
! 555: clean-generic:
! 556:
! 557: distclean-generic:
! 558: -rm -f Makefile $(CONFIG_CLEAN_FILES)
! 559:
! 560: maintainer-clean-generic:
! 561: @echo "This command is intended for maintainers to use"
! 562: @echo "it deletes files that may require special tools to rebuild."
! 563: clean: clean-recursive
! 564:
! 565: clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
! 566:
! 567: distclean: distclean-recursive
! 568: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
! 569: distclean-am: clean-am distclean-compile distclean-depend \
! 570: distclean-generic distclean-hdr distclean-tags
! 571:
! 572: dvi: dvi-recursive
! 573:
! 574: dvi-am:
! 575:
! 576: info: info-recursive
! 577:
! 578: info-am:
! 579:
! 580: install-data-am: install-man
! 581:
! 582: install-exec-am: install-sbinPROGRAMS
! 583:
! 584: install-info: install-info-recursive
! 585:
! 586: install-man: install-man8
! 587:
! 588: installcheck-am:
! 589:
! 590: maintainer-clean: maintainer-clean-recursive
! 591: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
! 592: -rm -rf autom4te.cache
! 593: maintainer-clean-am: distclean-am maintainer-clean-generic
! 594:
! 595: mostlyclean: mostlyclean-recursive
! 596:
! 597: mostlyclean-am: mostlyclean-compile mostlyclean-generic
! 598:
! 599: uninstall-am: uninstall-info-am uninstall-man uninstall-sbinPROGRAMS
! 600:
! 601: uninstall-info: uninstall-info-recursive
! 602:
! 603: uninstall-man: uninstall-man8
! 604:
! 605: .PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
! 606: clean-generic clean-recursive clean-sbinPROGRAMS dist dist-all \
! 607: dist-gzip distcheck distclean distclean-compile \
! 608: distclean-depend distclean-generic distclean-hdr \
! 609: distclean-recursive distclean-tags distcleancheck distdir dvi \
! 610: dvi-am dvi-recursive info info-am info-recursive install \
! 611: install-am install-data install-data-am install-data-recursive \
! 612: install-exec install-exec-am install-exec-recursive \
! 613: install-info install-info-am install-info-recursive install-man \
! 614: install-man8 install-recursive install-sbinPROGRAMS \
! 615: install-strip installcheck installcheck-am installdirs \
! 616: installdirs-am installdirs-recursive maintainer-clean \
! 617: maintainer-clean-generic maintainer-clean-recursive mostlyclean \
! 618: mostlyclean-compile mostlyclean-generic mostlyclean-recursive \
! 619: tags tags-recursive uninstall uninstall-am uninstall-info-am \
! 620: uninstall-info-recursive uninstall-man uninstall-man8 \
! 621: uninstall-recursive uninstall-sbinPROGRAMS
! 622:
! 623:
! 624: iftop.cat: iftop.8
! 625: (echo -e ".pl 1100i" ; cat iftop.8 ; echo ".pl \n(nlu+10") | groff -Tascii -man > iftop.cat
! 626:
! 627: iftop.spec: iftop.spec.in configure.in
! 628: sed 's/__VERSION__/$(VERSION)/' < iftop.spec.in > iftop.spec
! 629: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 630: # Otherwise a system limit (for SysV at least) may be exceeded.
! 631: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / iftop