--- embedaddon/ipsec-tools/Makefile	2013/07/22 12:28:06	1.1.1.1.2.3
+++ embedaddon/ipsec-tools/Makefile	2014/07/30 09:05:17	1.1.1.1.2.3.2.1
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.14 from Makefile.am.
 # Makefile.  Generated from Makefile.in by configure.
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,6 +14,51 @@
 
 
 
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/ipsec-tools
 pkgincludedir = $(includedir)/ipsec-tools
 pkglibdir = $(libdir)/ipsec-tools
@@ -31,16 +75,16 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-build_triplet = i386-elwix-freebsd
-host_triplet = i386-elwix-freebsd
+build_triplet = i386-unknown-freebsd11.0
+host_triplet = i386-unknown-freebsd11.0
 subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(srcdir)/package_version.h.in $(top_srcdir)/configure \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(srcdir)/config.h.in $(srcdir)/package_version.h.in \
 	$(top_srcdir)/src/racoon/samples/psk.txt.in \
-	$(top_srcdir)/src/racoon/samples/racoon.conf.in NEWS \
-	config.guess config.sub depcomp install-sh ltmain.sh missing \
-	ylwrap
+	$(top_srcdir)/src/racoon/samples/racoon.conf.in ChangeLog NEWS \
+	README compile config.guess config.sub depcomp install-sh \
+	missing ylwrap ltmain.sh
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/acracoon.m4 \
 	$(top_srcdir)/configure.ac
@@ -53,29 +97,72 @@ CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES = package_version.h src/racoon/samples/psk.txt \
 	src/racoon/samples/racoon.conf
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+CSCOPE = cscope
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -103,25 +190,30 @@ am__relativize = \
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
+DIST_TARGETS = dist-bzip2 dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
-ACLOCAL = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run aclocal-1.11
-AMTAR = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run tar
+ACLOCAL = aclocal-1.14
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 1
 AR = ar
-AUTOCONF = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run automake-1.11
+AUTOCONF = autoconf
+AUTOHEADER = autoheader
+AUTOMAKE = automake-1.14
 AWK = gawk
-CC = cc 
+CC = cc
 CCDEPMODE = depmode=gcc3
 CFLAGS = -g -O2  -Wall -Werror -Wno-unused
 CONFIGURE_AMFLAGS = 
-CPP = cpp 
+CPP = cc -E
 CPPFLAGS =   -I${top_srcdir}/src/racoon/missing
 CRYPTOBJS = 
 CYGPATH_W = echo
 DEFS = -DHAVE_CONFIG_H
 DEPDIR = .deps
+DLLTOOL = false
 DSYMUTIL = 
 DUMPBIN = 
 ECHO_C = 
@@ -131,12 +223,12 @@ EGREP = /usr/bin/grep -E
 EXEEXT = 
 EXTRA_CRYPTO = 
 FGREP = /usr/bin/grep -F
-FRAG_OBJS = isakmp_frag.o
+FRAG_OBJS = 
 GLIBC_BUGS = 
 GREP = /usr/bin/grep
-HYBRID_OBJS = isakmp_xauth.o isakmp_cfg.o isakmp_unity.o throttle.o
+HYBRID_OBJS = 
 INCLUDE_GLIBC = 
-INSTALL = /home/misho/work/elwix/build/1.9/obj/i386/home/fbsd_work.src/src/tmp/legacy/usr/bin/install -c
+INSTALL = /usr/bin/install -c
 INSTALL_DATA = ${INSTALL} -m 644
 INSTALL_OPTS = 
 INSTALL_PROGRAM = ${INSTALL}
@@ -144,21 +236,22 @@ INSTALL_SCRIPT = ${INSTALL}
 INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
 KERNEL_INCLUDE = 
 KRB5_CONFIG = /usr/bin/krb5-config
-LD = ld
+LD = /usr/bin/ld
 LDFLAGS = 
 LEX = flex
 LEXLIB = -lfl
 LEX_OUTPUT_ROOT = lex.yy
 LIBOBJS = 
-LIBS = -lradius -lcrypto  -lreadline -lcrypt -lcrypt -L/lib -R/lib -lradius
-LIBTOOL = $(SHELL) /usr/local/bin/libtool
+LIBS = -lcrypto  -lreadline
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
 LIPO = 
 LN_S = ln -s
 LTLIBOBJS = 
-MAKEINFO = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run makeinfo
+MAKEINFO = makeinfo
+MANIFEST_TOOL = :
 MKDIR_P = ./install-sh -c -d
-NATT_OBJS = nattraversal.o
-NM = nm
+NATT_OBJS = 
+NM = /usr/bin/nm -B
 NMEDIT = 
 OBJDUMP = objdump
 OBJEXT = o
@@ -167,10 +260,10 @@ OTOOL64 = 
 PACKAGE = ipsec-tools
 PACKAGE_BUGREPORT = 
 PACKAGE_NAME = ipsec-tools
-PACKAGE_STRING = ipsec-tools 0.8.0
+PACKAGE_STRING = ipsec-tools 0.8.1
 PACKAGE_TARNAME = ipsec-tools
 PACKAGE_URL = 
-PACKAGE_VERSION = 0.8.0
+PACKAGE_VERSION = 0.8.1
 PATH_SEPARATOR = :
 RANLIB = ranlib
 RPM = 
@@ -179,37 +272,38 @@ SED = /usr/bin/sed
 SET_MAKE = 
 SHELL = /bin/sh
 STRIP = strip
-VERSION = 0.8.0
+VERSION = 0.8.1
 YACC = bison -y
 YFLAGS = 
 abs_builddir = /home/misho/work/embedaddon/ipsec-tools
 abs_srcdir = /home/misho/work/embedaddon/ipsec-tools
 abs_top_builddir = /home/misho/work/embedaddon/ipsec-tools
 abs_top_srcdir = /home/misho/work/embedaddon/ipsec-tools
-ac_ct_CC = cc 
+ac_ct_AR = ar
+ac_ct_CC = 
 ac_ct_DUMPBIN = 
 am__include = include
 am__leading_dot = .
 am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
+am__tar = $${TAR-tar} chof - "$$tardir"
+am__untar = $${TAR-tar} xf -
 bindir = ${exec_prefix}/bin
-build = i386-elwix-freebsd
-build_alias = i386-elwix-freebsd
+build = i386-unknown-freebsd11.0
+build_alias = 
 build_cpu = i386
-build_os = freebsd
-build_vendor = elwix
+build_os = freebsd11.0
+build_vendor = unknown
 builddir = .
 datadir = ${datarootdir}
 datarootdir = ${prefix}/share
 docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
 dvidir = ${docdir}
 exec_prefix = ${prefix}
-host = i386-elwix-freebsd
+host = i386-unknown-freebsd11.0
 host_alias = 
 host_cpu = i386
-host_os = freebsd
-host_vendor = elwix
+host_os = freebsd11.0
+host_vendor = unknown
 htmldir = ${docdir}
 include_racoondir = ${prefix}/include/racoon
 includedir = ${prefix}/include
@@ -218,19 +312,18 @@ install_sh = ${SHELL} /home/misho/work/embedaddon/ipse
 libdir = ${exec_prefix}/lib
 libexecdir = ${exec_prefix}/libexec
 localedir = ${datarootdir}/locale
-localstatedir = /var/run
-lt_ECHO = echo
+localstatedir = ${prefix}/var
 mandir = ${datarootdir}/man
-mkdir_p = $(top_builddir)/./install-sh -c -d
+mkdir_p = $(MKDIR_P)
 oldincludedir = /usr/include
 pdfdir = ${docdir}
-prefix = /home/misho/work/elwix/build/1.9/arch/i386/pkg
+prefix = /usr/local
 program_transform_name = s,x,x,
 psdir = ${docdir}
 sbindir = ${exec_prefix}/sbin
 sharedstatedir = ${prefix}/com
 srcdir = .
-sysconfdir = /etc/racoon
+sysconfdir = ${prefix}/etc
 target_alias = 
 top_build_prefix = 
 top_builddir = .
@@ -243,7 +336,7 @@ all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-am--refresh:
+am--refresh: Makefile
 	@:
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
@@ -279,10 +372,8 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -311,22 +402,25 @@ distclean-libtool:
 	-rm -f libtool config.lt
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -341,57 +435,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -407,12 +456,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -424,15 +468,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -441,9 +481,31 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
 
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
@@ -479,13 +541,10 @@ distdir: $(DISTFILES)
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
@@ -514,36 +573,41 @@ distdir: $(DISTFILES)
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
 
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
 
 dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -554,8 +618,8 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
@@ -565,9 +629,9 @@ distcheck: dist
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
@@ -575,6 +639,7 @@ distcheck: dist
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
@@ -598,13 +663,21 @@ distcheck: dist
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
@@ -635,10 +708,15 @@ install-am: all-am
 
 installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -721,29 +799,29 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
-	ctags-recursive install-am install-strip tags-recursive
+.MAKE: $(am__recursive_targets) all install-am install-strip
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am am--refresh check check-am clean clean-generic \
-	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
-	distcheck distclean distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	ps ps-am tags tags-recursive uninstall uninstall-am
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am clean clean-cscope clean-generic \
+	clean-libtool cscope cscopelist-am ctags ctags-am dist \
+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-data install-data-am \
+	install-dvi install-dvi-am install-exec install-exec-am \
+	install-html install-html-am install-info install-info-am \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am
 
 
 $(srcdir)/ChangeLog:
 	@if test -d "$(srcdir)/CVS"; then \
-	  $(srcdir)/misc/cvs2cl.pl --follow-only TRUNK -I ChangeLog --utc -U $(srcdir)/misc/cvsusermap --group-by-author --fsf -T -l "-d2006-09-10<now" --tag-regexp "^ipsec-tools" --stdout > $@ ; \
+	  $(srcdir)/misc/cvs2cl.pl --follow-only ipsec-tools-0_8-branch -I ChangeLog --utc -U $(srcdir)/misc/cvsusermap --group-by-author --fsf -T -l "-d2006-09-10<now" --tag-regexp "^ipsec-tools" --stdout > $@ ; \
 	  echo "For older changes see ChangeLog.old" >> $@ ; \
 	else \
 	  echo "A CVS checkout and perl is required to generate ChangeLog" ; \