Annotation of embedaddon/ipsec-tools/rpm/Makefile, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
! 2: # rpm/Makefile. Generated from Makefile.in by configure.
! 3:
! 4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
! 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
! 6: # Inc.
! 7: # This Makefile.in is free software; the Free Software Foundation
! 8: # gives unlimited permission to copy and/or distribute it,
! 9: # with or without modifications, as long as this notice is preserved.
! 10:
! 11: # This program is distributed in the hope that it will be useful,
! 12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 14: # PARTICULAR PURPOSE.
! 15:
! 16:
! 17:
! 18: pkgdatadir = $(datadir)/ipsec-tools
! 19: pkgincludedir = $(includedir)/ipsec-tools
! 20: pkglibdir = $(libdir)/ipsec-tools
! 21: pkglibexecdir = $(libexecdir)/ipsec-tools
! 22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 23: install_sh_DATA = $(install_sh) -c -m 644
! 24: install_sh_PROGRAM = $(install_sh) -c
! 25: install_sh_SCRIPT = $(install_sh) -c
! 26: INSTALL_HEADER = $(INSTALL_DATA)
! 27: transform = $(program_transform_name)
! 28: NORMAL_INSTALL = :
! 29: PRE_INSTALL = :
! 30: POST_INSTALL = :
! 31: NORMAL_UNINSTALL = :
! 32: PRE_UNINSTALL = :
! 33: POST_UNINSTALL = :
! 34: build_triplet = i386-portbld-freebsd10.0
! 35: host_triplet = i386-portbld-freebsd10.0
! 36: subdir = rpm
! 37: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
! 38: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 39: am__aclocal_m4_deps = $(top_srcdir)/acracoon.m4 \
! 40: $(top_srcdir)/configure.ac
! 41: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 42: $(ACLOCAL_M4)
! 43: mkinstalldirs = $(install_sh) -d
! 44: CONFIG_HEADER = $(top_builddir)/config.h
! 45: CONFIG_CLEAN_FILES =
! 46: CONFIG_CLEAN_VPATH_FILES =
! 47: SOURCES =
! 48: DIST_SOURCES =
! 49: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
! 50: html-recursive info-recursive install-data-recursive \
! 51: install-dvi-recursive install-exec-recursive \
! 52: install-html-recursive install-info-recursive \
! 53: install-pdf-recursive install-ps-recursive install-recursive \
! 54: installcheck-recursive installdirs-recursive pdf-recursive \
! 55: ps-recursive uninstall-recursive
! 56: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
! 57: distclean-recursive maintainer-clean-recursive
! 58: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
! 59: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
! 60: distdir
! 61: ETAGS = etags
! 62: CTAGS = ctags
! 63: DIST_SUBDIRS = $(SUBDIRS)
! 64: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 65: am__relativize = \
! 66: dir0=`pwd`; \
! 67: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
! 68: sed_rest='s,^[^/]*/*,,'; \
! 69: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
! 70: sed_butlast='s,/*[^/]*$$,,'; \
! 71: while test -n "$$dir1"; do \
! 72: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
! 73: if test "$$first" != "."; then \
! 74: if test "$$first" = ".."; then \
! 75: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
! 76: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
! 77: else \
! 78: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
! 79: if test "$$first2" = "$$first"; then \
! 80: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
! 81: else \
! 82: dir2="../$$dir2"; \
! 83: fi; \
! 84: dir0="$$dir0"/"$$first"; \
! 85: fi; \
! 86: fi; \
! 87: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
! 88: done; \
! 89: reldir="$$dir2"
! 90: ACLOCAL = ${SHELL} /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0/missing --run aclocal-1.11
! 91: AMTAR = ${SHELL} /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0/missing --run tar
! 92: AR = ar
! 93: AUTOCONF = ${SHELL} /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0/missing --run autoconf
! 94: AUTOHEADER = ${SHELL} /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0/missing --run autoheader
! 95: AUTOMAKE = ${SHELL} /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0/missing --run automake-1.11
! 96: AWK = gawk
! 97: CC = cc
! 98: CCDEPMODE = depmode=gcc3
! 99: CFLAGS = -pipe -g -Wall -Werror -Wno-unused
! 100: CONFIGURE_AMFLAGS =
! 101: CPP = cpp
! 102: CPPFLAGS = -I${top_srcdir}/src/racoon/missing
! 103: CRYPTOBJS =
! 104: CYGPATH_W = echo
! 105: DEFS = -DHAVE_CONFIG_H
! 106: DEPDIR = .deps
! 107: DSYMUTIL =
! 108: DUMPBIN =
! 109: ECHO_C =
! 110: ECHO_N = -n
! 111: ECHO_T =
! 112: EGREP = /usr/bin/grep -E
! 113: EXEEXT =
! 114: EXTRA_CRYPTO =
! 115: FGREP = /usr/bin/grep -F
! 116: FRAG_OBJS = isakmp_frag.o
! 117: GLIBC_BUGS =
! 118: GREP = /usr/bin/grep
! 119: HYBRID_OBJS = isakmp_xauth.o isakmp_cfg.o isakmp_unity.o throttle.o
! 120: INCLUDE_GLIBC =
! 121: INSTALL = /usr/bin/install -c -o root -g wheel
! 122: INSTALL_DATA = install -o root -g wheel -m 444
! 123: INSTALL_OPTS =
! 124: INSTALL_PROGRAM = install -o root -g wheel -m 555
! 125: INSTALL_SCRIPT = install -o root -g wheel -m 555
! 126: INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
! 127: KERNEL_INCLUDE =
! 128: KRB5_CONFIG = /usr/bin/krb5-config
! 129: LD = /usr/bin/ld
! 130: LDFLAGS = -rpath=/usr/lib:/usr/local/lib
! 131: LEX = flex
! 132: LEXLIB = -lfl
! 133: LEX_OUTPUT_ROOT = lex.yy
! 134: LIBOBJS =
! 135: LIBS = -lradius -lcrypto -lreadline -lcrypt -lcrypt -L/lib -R/lib -lradius
! 136: LIBTOOL = $(SHELL) /usr/local/bin/libtool
! 137: LIPO =
! 138: LN_S = ln -s
! 139: LTLIBOBJS =
! 140: MAKEINFO = ${SHELL} /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0/missing --run makeinfo
! 141: MKDIR_P = .././install-sh -c -d
! 142: NATT_OBJS = nattraversal.o
! 143: NM = /usr/bin/nm -B
! 144: NMEDIT =
! 145: OBJDUMP = objdump
! 146: OBJEXT = o
! 147: OTOOL =
! 148: OTOOL64 =
! 149: PACKAGE = ipsec-tools
! 150: PACKAGE_BUGREPORT =
! 151: PACKAGE_NAME = ipsec-tools
! 152: PACKAGE_STRING = ipsec-tools 0.8.0
! 153: PACKAGE_TARNAME = ipsec-tools
! 154: PACKAGE_URL =
! 155: PACKAGE_VERSION = 0.8.0
! 156: PATH_SEPARATOR = :
! 157: RANLIB = ranlib
! 158: RPM =
! 159: SECCTX_OBJS =
! 160: SED = /usr/bin/sed
! 161: SET_MAKE =
! 162: SHELL = /bin/sh
! 163: STRIP = strip
! 164: VERSION = 0.8.0
! 165: YACC = bison -y
! 166: YFLAGS =
! 167: abs_builddir = /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0/rpm
! 168: abs_srcdir = /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0/rpm
! 169: abs_top_builddir = /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0
! 170: abs_top_srcdir = /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0
! 171: ac_ct_CC = cc
! 172: ac_ct_DUMPBIN =
! 173: am__include = include
! 174: am__leading_dot = .
! 175: am__quote =
! 176: am__tar = ${AMTAR} chof - "$$tardir"
! 177: am__untar = ${AMTAR} xf -
! 178: bindir = ${exec_prefix}/bin
! 179: build = i386-portbld-freebsd10.0
! 180: build_alias = i386-portbld-freebsd10.0
! 181: build_cpu = i386
! 182: build_os = freebsd10.0
! 183: build_vendor = portbld
! 184: builddir = .
! 185: datadir = ${datarootdir}
! 186: datarootdir = ${prefix}/share
! 187: docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
! 188: dvidir = ${docdir}
! 189: exec_prefix = ${prefix}
! 190: host = i386-portbld-freebsd10.0
! 191: host_alias =
! 192: host_cpu = i386
! 193: host_os = freebsd10.0
! 194: host_vendor = portbld
! 195: htmldir = ${docdir}
! 196: include_racoondir = ${prefix}/include/racoon
! 197: includedir = ${prefix}/include
! 198: infodir = /usr/local/info
! 199: install_sh = ${SHELL} /usr/ports/security/ipsec-tools/work/ipsec-tools-0.8.0/install-sh
! 200: libdir = ${exec_prefix}/lib
! 201: libexecdir = ${exec_prefix}/libexec
! 202: localedir = ${datarootdir}/locale
! 203: localstatedir = /var/db
! 204: lt_ECHO = echo
! 205: mandir = /usr/local/man
! 206: mkdir_p = $(top_builddir)/./install-sh -c -d
! 207: oldincludedir = /usr/include
! 208: pdfdir = ${docdir}
! 209: prefix = /usr/local
! 210: program_transform_name = s,x,x,
! 211: psdir = ${docdir}
! 212: sbindir = ${exec_prefix}/sbin
! 213: sharedstatedir = ${prefix}/com
! 214: srcdir = .
! 215: sysconfdir = /usr/local/etc/racoon
! 216: target_alias =
! 217: top_build_prefix = ../
! 218: top_builddir = ..
! 219: top_srcdir = ..
! 220: SUBDIRS = suse
! 221: EXTRA_DIST = \
! 222: ipsec-tools.spec.in
! 223:
! 224: CLEANFILES = ipsec-tools.spec
! 225: all: all-recursive
! 226:
! 227: .SUFFIXES:
! 228: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
! 229: @for dep in $?; do \
! 230: case '$(am__configure_deps)' in \
! 231: *$$dep*) \
! 232: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 233: && { if test -f $@; then exit 0; else break; fi; }; \
! 234: exit 1;; \
! 235: esac; \
! 236: done; \
! 237: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rpm/Makefile'; \
! 238: $(am__cd) $(top_srcdir) && \
! 239: $(AUTOMAKE) --foreign rpm/Makefile
! 240: .PRECIOUS: Makefile
! 241: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 242: @case '$?' in \
! 243: *config.status*) \
! 244: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 245: *) \
! 246: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 247: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 248: esac;
! 249:
! 250: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 251: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 252:
! 253: $(top_srcdir)/configure: $(am__configure_deps)
! 254: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 255: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
! 256: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 257: $(am__aclocal_m4_deps):
! 258:
! 259: mostlyclean-libtool:
! 260: -rm -f *.lo
! 261:
! 262: clean-libtool:
! 263: -rm -rf .libs _libs
! 264:
! 265: # This directory's subdirectories are mostly independent; you can cd
! 266: # into them and run `make' without going through this Makefile.
! 267: # To change the values of `make' variables: instead of editing Makefiles,
! 268: # (1) if the variable is set in `config.status', edit `config.status'
! 269: # (which will cause the Makefiles to be regenerated when you run `make');
! 270: # (2) otherwise, pass the desired values on the `make' command line.
! 271: $(RECURSIVE_TARGETS):
! 272: @fail= failcom='exit 1'; \
! 273: for f in x $$MAKEFLAGS; do \
! 274: case $$f in \
! 275: *=* | --[!k]*);; \
! 276: *k*) failcom='fail=yes';; \
! 277: esac; \
! 278: done; \
! 279: dot_seen=no; \
! 280: target=`echo $@ | sed s/-recursive//`; \
! 281: list='$(SUBDIRS)'; for subdir in $$list; do \
! 282: echo "Making $$target in $$subdir"; \
! 283: if test "$$subdir" = "."; then \
! 284: dot_seen=yes; \
! 285: local_target="$$target-am"; \
! 286: else \
! 287: local_target="$$target"; \
! 288: fi; \
! 289: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 290: || eval $$failcom; \
! 291: done; \
! 292: if test "$$dot_seen" = "no"; then \
! 293: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
! 294: fi; test -z "$$fail"
! 295:
! 296: $(RECURSIVE_CLEAN_TARGETS):
! 297: @fail= failcom='exit 1'; \
! 298: for f in x $$MAKEFLAGS; do \
! 299: case $$f in \
! 300: *=* | --[!k]*);; \
! 301: *k*) failcom='fail=yes';; \
! 302: esac; \
! 303: done; \
! 304: dot_seen=no; \
! 305: case "$@" in \
! 306: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! 307: *) list='$(SUBDIRS)' ;; \
! 308: esac; \
! 309: rev=''; for subdir in $$list; do \
! 310: if test "$$subdir" = "."; then :; else \
! 311: rev="$$subdir $$rev"; \
! 312: fi; \
! 313: done; \
! 314: rev="$$rev ."; \
! 315: target=`echo $@ | sed s/-recursive//`; \
! 316: for subdir in $$rev; do \
! 317: echo "Making $$target in $$subdir"; \
! 318: if test "$$subdir" = "."; then \
! 319: local_target="$$target-am"; \
! 320: else \
! 321: local_target="$$target"; \
! 322: fi; \
! 323: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 324: || eval $$failcom; \
! 325: done && test -z "$$fail"
! 326: tags-recursive:
! 327: list='$(SUBDIRS)'; for subdir in $$list; do \
! 328: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
! 329: done
! 330: ctags-recursive:
! 331: list='$(SUBDIRS)'; for subdir in $$list; do \
! 332: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
! 333: done
! 334:
! 335: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
! 336: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 337: unique=`for i in $$list; do \
! 338: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 339: done | \
! 340: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 341: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 342: mkid -fID $$unique
! 343: tags: TAGS
! 344:
! 345: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! 346: $(TAGS_FILES) $(LISP)
! 347: set x; \
! 348: here=`pwd`; \
! 349: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
! 350: include_option=--etags-include; \
! 351: empty_fix=.; \
! 352: else \
! 353: include_option=--include; \
! 354: empty_fix=; \
! 355: fi; \
! 356: list='$(SUBDIRS)'; for subdir in $$list; do \
! 357: if test "$$subdir" = .; then :; else \
! 358: test ! -f $$subdir/TAGS || \
! 359: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
! 360: fi; \
! 361: done; \
! 362: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 363: unique=`for i in $$list; do \
! 364: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 365: done | \
! 366: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 367: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 368: shift; \
! 369: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
! 370: test -n "$$unique" || unique=$$empty_fix; \
! 371: if test $$# -gt 0; then \
! 372: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 373: "$$@" $$unique; \
! 374: else \
! 375: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 376: $$unique; \
! 377: fi; \
! 378: fi
! 379: ctags: CTAGS
! 380: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! 381: $(TAGS_FILES) $(LISP)
! 382: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 383: unique=`for i in $$list; do \
! 384: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 385: done | \
! 386: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 387: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 388: test -z "$(CTAGS_ARGS)$$unique" \
! 389: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
! 390: $$unique
! 391:
! 392: GTAGS:
! 393: here=`$(am__cd) $(top_builddir) && pwd` \
! 394: && $(am__cd) $(top_srcdir) \
! 395: && gtags -i $(GTAGS_ARGS) "$$here"
! 396:
! 397: distclean-tags:
! 398: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
! 399:
! 400: distdir: $(DISTFILES)
! 401: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 402: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 403: list='$(DISTFILES)'; \
! 404: dist_files=`for file in $$list; do echo $$file; done | \
! 405: sed -e "s|^$$srcdirstrip/||;t" \
! 406: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 407: case $$dist_files in \
! 408: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 409: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 410: sort -u` ;; \
! 411: esac; \
! 412: for file in $$dist_files; do \
! 413: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 414: if test -d $$d/$$file; then \
! 415: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 416: if test -d "$(distdir)/$$file"; then \
! 417: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 418: fi; \
! 419: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 420: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 421: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 422: fi; \
! 423: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 424: else \
! 425: test -f "$(distdir)/$$file" \
! 426: || cp -p $$d/$$file "$(distdir)/$$file" \
! 427: || exit 1; \
! 428: fi; \
! 429: done
! 430: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 431: if test "$$subdir" = .; then :; else \
! 432: test -d "$(distdir)/$$subdir" \
! 433: || $(MKDIR_P) "$(distdir)/$$subdir" \
! 434: || exit 1; \
! 435: fi; \
! 436: done
! 437: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 438: if test "$$subdir" = .; then :; else \
! 439: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
! 440: $(am__relativize); \
! 441: new_distdir=$$reldir; \
! 442: dir1=$$subdir; dir2="$(top_distdir)"; \
! 443: $(am__relativize); \
! 444: new_top_distdir=$$reldir; \
! 445: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
! 446: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
! 447: ($(am__cd) $$subdir && \
! 448: $(MAKE) $(AM_MAKEFLAGS) \
! 449: top_distdir="$$new_top_distdir" \
! 450: distdir="$$new_distdir" \
! 451: am__remove_distdir=: \
! 452: am__skip_length_check=: \
! 453: am__skip_mode_fix=: \
! 454: distdir) \
! 455: || exit 1; \
! 456: fi; \
! 457: done
! 458: check-am: all-am
! 459: check: check-recursive
! 460: all-am: Makefile all-local
! 461: installdirs: installdirs-recursive
! 462: installdirs-am:
! 463: install: install-recursive
! 464: install-exec: install-exec-recursive
! 465: install-data: install-data-recursive
! 466: uninstall: uninstall-recursive
! 467:
! 468: install-am: all-am
! 469: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 470:
! 471: installcheck: installcheck-recursive
! 472: install-strip:
! 473: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 474: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 475: `test -z '$(STRIP)' || \
! 476: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
! 477: mostlyclean-generic:
! 478:
! 479: clean-generic:
! 480: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
! 481:
! 482: distclean-generic:
! 483: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 484: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
! 485:
! 486: maintainer-clean-generic:
! 487: @echo "This command is intended for maintainers to use"
! 488: @echo "it deletes files that may require special tools to rebuild."
! 489: clean: clean-recursive
! 490:
! 491: clean-am: clean-generic clean-libtool mostlyclean-am
! 492:
! 493: distclean: distclean-recursive
! 494: -rm -f Makefile
! 495: distclean-am: clean-am distclean-generic distclean-tags
! 496:
! 497: dvi: dvi-recursive
! 498:
! 499: dvi-am:
! 500:
! 501: html: html-recursive
! 502:
! 503: html-am:
! 504:
! 505: info: info-recursive
! 506:
! 507: info-am:
! 508:
! 509: install-data-am:
! 510:
! 511: install-dvi: install-dvi-recursive
! 512:
! 513: install-dvi-am:
! 514:
! 515: install-exec-am:
! 516:
! 517: install-html: install-html-recursive
! 518:
! 519: install-html-am:
! 520:
! 521: install-info: install-info-recursive
! 522:
! 523: install-info-am:
! 524:
! 525: install-man:
! 526:
! 527: install-pdf: install-pdf-recursive
! 528:
! 529: install-pdf-am:
! 530:
! 531: install-ps: install-ps-recursive
! 532:
! 533: install-ps-am:
! 534:
! 535: installcheck-am:
! 536:
! 537: maintainer-clean: maintainer-clean-recursive
! 538: -rm -f Makefile
! 539: maintainer-clean-am: distclean-am maintainer-clean-generic
! 540:
! 541: mostlyclean: mostlyclean-recursive
! 542:
! 543: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 544:
! 545: pdf: pdf-recursive
! 546:
! 547: pdf-am:
! 548:
! 549: ps: ps-recursive
! 550:
! 551: ps-am:
! 552:
! 553: uninstall-am:
! 554:
! 555: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
! 556: install-am install-strip tags-recursive
! 557:
! 558: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
! 559: all all-am all-local check check-am clean clean-generic \
! 560: clean-libtool ctags ctags-recursive distclean \
! 561: distclean-generic distclean-libtool distclean-tags distdir dvi \
! 562: dvi-am html html-am info info-am install install-am \
! 563: install-data install-data-am install-dvi install-dvi-am \
! 564: install-exec install-exec-am install-html install-html-am \
! 565: install-info install-info-am install-man install-pdf \
! 566: install-pdf-am install-ps install-ps-am install-strip \
! 567: installcheck installcheck-am installdirs installdirs-am \
! 568: maintainer-clean maintainer-clean-generic mostlyclean \
! 569: mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
! 570: tags tags-recursive uninstall uninstall-am
! 571:
! 572:
! 573: all-local: ipsec-tools.spec
! 574:
! 575: ipsec-tools.spec: ipsec-tools.spec.in Makefile
! 576: rm -f $@.tmp
! 577: sed < $< > $@.tmp \
! 578: -e 's:@-VERSION-@:${VERSION}:'
! 579: mv $@.tmp $@
! 580:
! 581: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 582: # Otherwise a system limit (for SysV at least) may be exceeded.
! 583: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ipsec-tools / rpm