Return to racoon.init CVS log | Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ipsec-tools / rpm / suse |
1.1 ! misho 1: #! /bin/sh ! 2: # Copyright (c) 2001-2002 SuSE GmbH Nuernberg, Germany. ! 3: # ! 4: # Author: Michal Ludvig <feedback@suse.de>, 2004 ! 5: # ! 6: # /etc/init.d/ipsec-tools ! 7: # and its symbolic link ! 8: # /usr/sbin/rcipsec-tools ! 9: # ! 10: # System startup script for the IPsec key management daemon ! 11: # ! 12: ### BEGIN INIT INFO ! 13: # Provides: racoon ! 14: # Required-Start: $remote_fs $named $syslog ! 15: # Required-Stop: $remote_fs $named $syslog ! 16: # Default-Start: 3 5 ! 17: # Default-Stop: 0 1 2 6 ! 18: # Description: IPsec key management daemon ! 19: ### END INIT INFO ! 20: ! 21: SETKEY="IPsec policies" ! 22: SETKEY_BIN=/usr/sbin/setkey ! 23: SETKEY_CONF=/etc/racoon/setkey.conf ! 24: ! 25: RACOON="IPsec IKE daemon (racoon)" ! 26: RACOON_BIN=/usr/sbin/racoon ! 27: RACOON_CONF=/etc/racoon/racoon.conf ! 28: RACOON_PIDFILE=/var/run/racoon.pid ! 29: ! 30: test -x $SETKEY_BIN || exit 5 ! 31: test -x $RACOON_BIN || exit 5 ! 32: ! 33: test -f /etc/sysconfig/racoon && . /etc/sysconfig/racoon ! 34: ! 35: # Shell functions sourced from /etc/rc.status: ! 36: # rc_check check and set local and overall rc status ! 37: # rc_status check and set local and overall rc status ! 38: # rc_status -v ditto but be verbose in local rc status ! 39: # rc_status -v -r ditto and clear the local rc status ! 40: # rc_failed set local and overall rc status to failed ! 41: # rc_failed <num> set local and overall rc status to <num><num> ! 42: # rc_reset clear local rc status (overall remains) ! 43: # rc_exit exit appropriate to overall rc status ! 44: . /etc/rc.status ! 45: ! 46: # First reset status of this service ! 47: rc_reset ! 48: ! 49: # Return values acc. to LSB for all commands but status: ! 50: # 0 - success ! 51: # 1 - generic or unspecified error ! 52: # 2 - invalid or excess argument(s) ! 53: # 3 - unimplemented feature (e.g. "reload") ! 54: # 4 - insufficient privilege ! 55: # 5 - program is not installed ! 56: # 6 - program is not configured ! 57: # 7 - program is not running ! 58: # ! 59: # Note that starting an already running service, stopping ! 60: # or restarting a not-running service as well as the restart ! 61: # with force-reload (in case signalling is not supported) are ! 62: # considered a success. ! 63: ! 64: case "$1" in ! 65: start) ! 66: # Setting up SPD policies is not required. ! 67: if [ -f $SETKEY_CONF ]; then ! 68: echo -n "Setting up $SETKEY" ! 69: $SETKEY_BIN $SETKEY_OPTIONS -f $SETKEY_CONF ! 70: rc_status -v ! 71: rc_reset ! 72: fi ! 73: ! 74: echo -n "Starting $RACOON " ! 75: ## If there is no conf file, skip starting of ddtd ! 76: ## and return with "program not configured" ! 77: if ! [ -f $RACOON_CONF ]; then ! 78: echo -e -n "... no configuration file found" ! 79: rc_status -s ! 80: # service is not configured ! 81: rc_failed 6 ! 82: rc_exit ! 83: fi ! 84: ! 85: # startproc should return 0, even if service is ! 86: # already running to match LSB spec. ! 87: startproc $RACOON_BIN $RACOON_OPTIONS -f $RACOON_CONF ! 88: rc_status -v ! 89: ;; ! 90: ! 91: stop) ! 92: echo -n "Shutting down $RACOON" ! 93: ## Stop daemon with killproc(8) and if this fails ! 94: ## set echo the echo return value. ! 95: ! 96: killproc -p $RACOON_PIDFILE -TERM $RACOON_BIN ! 97: ! 98: # Remember status and be verbose ! 99: rc_status -v ! 100: rc_reset ! 101: ! 102: # Flush SPD policies if required ! 103: if [ -n "$SETKEY_FLUSH_OPTIONS" ]; then ! 104: echo -n "Flushing $SETKEY" ! 105: $SETKEY_BIN $SETKEY_FLUSH_OPTIONS ! 106: rc_status -v ! 107: fi ! 108: ;; ! 109: try-restart) ! 110: ## Stop the service and if this succeeds (i.e. the ! 111: ## service was running before), start it again. ! 112: $0 stop && $0 start ! 113: ! 114: # Remember status and be quiet ! 115: rc_status ! 116: ;; ! 117: restart) ! 118: ## Stop the service and regardless of whether it was ! 119: ## running or not, start it again. ! 120: $0 stop ! 121: $0 start ! 122: ! 123: # Remember status and be quiet ! 124: rc_status ! 125: ;; ! 126: force-reload) ! 127: ## Signal the daemon to reload its config. Most daemons ! 128: ## do this on signal 1 (SIGHUP). ! 129: ## If it does not support it, restart. ! 130: ! 131: echo -n "Reload service $RACOON" ! 132: killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN ! 133: rc_status -v ! 134: ;; ! 135: reload) ! 136: ## Like force-reload, but if daemon does not support ! 137: ## signalling, do nothing (!) ! 138: ! 139: echo -n "Reload service $RACOON" ! 140: killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN ! 141: rc_status -v ! 142: ;; ! 143: status) ! 144: echo -n "Checking for $RACOON: " ! 145: ## Check status with checkproc(8), if process is running ! 146: ## checkproc will return with exit status 0. ! 147: ! 148: # Status has a slightly different for the status command: ! 149: # 0 - service running ! 150: # 1 - service dead, but /var/run/ pid file exists ! 151: # 2 - service dead, but /var/lock/ lock file exists ! 152: # 3 - service not running ! 153: ! 154: checkproc -p $RACOON_PIDFILE $RACOON_BIN ! 155: rc_status -v ! 156: ;; ! 157: probe) ! 158: ## Optional: Probe for the necessity of a reload, ! 159: ## give out the argument which is required for a reload. ! 160: ! 161: test "$RACOON_CONF" -nt "$RACOON_PIDFILE" && echo reload ! 162: ;; ! 163: *) ! 164: echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}" ! 165: exit 1 ! 166: ;; ! 167: esac ! 168: rc_exit