Annotation of embedaddon/ipsec-tools/rpm/suse/racoon.init, revision 1.1.1.1
1.1 misho 1: #! /bin/sh
2: # Copyright (c) 2001-2002 SuSE GmbH Nuernberg, Germany.
3: #
4: # Author: Michal Ludvig <feedback@suse.de>, 2004
5: #
6: # /etc/init.d/ipsec-tools
7: # and its symbolic link
8: # /usr/sbin/rcipsec-tools
9: #
10: # System startup script for the IPsec key management daemon
11: #
12: ### BEGIN INIT INFO
13: # Provides: racoon
14: # Required-Start: $remote_fs $named $syslog
15: # Required-Stop: $remote_fs $named $syslog
16: # Default-Start: 3 5
17: # Default-Stop: 0 1 2 6
18: # Description: IPsec key management daemon
19: ### END INIT INFO
20:
21: SETKEY="IPsec policies"
22: SETKEY_BIN=/usr/sbin/setkey
23: SETKEY_CONF=/etc/racoon/setkey.conf
24:
25: RACOON="IPsec IKE daemon (racoon)"
26: RACOON_BIN=/usr/sbin/racoon
27: RACOON_CONF=/etc/racoon/racoon.conf
28: RACOON_PIDFILE=/var/run/racoon.pid
29:
30: test -x $SETKEY_BIN || exit 5
31: test -x $RACOON_BIN || exit 5
32:
33: test -f /etc/sysconfig/racoon && . /etc/sysconfig/racoon
34:
35: # Shell functions sourced from /etc/rc.status:
36: # rc_check check and set local and overall rc status
37: # rc_status check and set local and overall rc status
38: # rc_status -v ditto but be verbose in local rc status
39: # rc_status -v -r ditto and clear the local rc status
40: # rc_failed set local and overall rc status to failed
41: # rc_failed <num> set local and overall rc status to <num><num>
42: # rc_reset clear local rc status (overall remains)
43: # rc_exit exit appropriate to overall rc status
44: . /etc/rc.status
45:
46: # First reset status of this service
47: rc_reset
48:
49: # Return values acc. to LSB for all commands but status:
50: # 0 - success
51: # 1 - generic or unspecified error
52: # 2 - invalid or excess argument(s)
53: # 3 - unimplemented feature (e.g. "reload")
54: # 4 - insufficient privilege
55: # 5 - program is not installed
56: # 6 - program is not configured
57: # 7 - program is not running
58: #
59: # Note that starting an already running service, stopping
60: # or restarting a not-running service as well as the restart
61: # with force-reload (in case signalling is not supported) are
62: # considered a success.
63:
64: case "$1" in
65: start)
66: # Setting up SPD policies is not required.
67: if [ -f $SETKEY_CONF ]; then
68: echo -n "Setting up $SETKEY"
69: $SETKEY_BIN $SETKEY_OPTIONS -f $SETKEY_CONF
70: rc_status -v
71: rc_reset
72: fi
73:
74: echo -n "Starting $RACOON "
75: ## If there is no conf file, skip starting of ddtd
76: ## and return with "program not configured"
77: if ! [ -f $RACOON_CONF ]; then
78: echo -e -n "... no configuration file found"
79: rc_status -s
80: # service is not configured
81: rc_failed 6
82: rc_exit
83: fi
84:
85: # startproc should return 0, even if service is
86: # already running to match LSB spec.
87: startproc $RACOON_BIN $RACOON_OPTIONS -f $RACOON_CONF
88: rc_status -v
89: ;;
90:
91: stop)
92: echo -n "Shutting down $RACOON"
93: ## Stop daemon with killproc(8) and if this fails
94: ## set echo the echo return value.
95:
96: killproc -p $RACOON_PIDFILE -TERM $RACOON_BIN
97:
98: # Remember status and be verbose
99: rc_status -v
100: rc_reset
101:
102: # Flush SPD policies if required
103: if [ -n "$SETKEY_FLUSH_OPTIONS" ]; then
104: echo -n "Flushing $SETKEY"
105: $SETKEY_BIN $SETKEY_FLUSH_OPTIONS
106: rc_status -v
107: fi
108: ;;
109: try-restart)
110: ## Stop the service and if this succeeds (i.e. the
111: ## service was running before), start it again.
112: $0 stop && $0 start
113:
114: # Remember status and be quiet
115: rc_status
116: ;;
117: restart)
118: ## Stop the service and regardless of whether it was
119: ## running or not, start it again.
120: $0 stop
121: $0 start
122:
123: # Remember status and be quiet
124: rc_status
125: ;;
126: force-reload)
127: ## Signal the daemon to reload its config. Most daemons
128: ## do this on signal 1 (SIGHUP).
129: ## If it does not support it, restart.
130:
131: echo -n "Reload service $RACOON"
132: killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN
133: rc_status -v
134: ;;
135: reload)
136: ## Like force-reload, but if daemon does not support
137: ## signalling, do nothing (!)
138:
139: echo -n "Reload service $RACOON"
140: killproc -p $RACOON_PIDFILE -HUP $RACOON_BIN
141: rc_status -v
142: ;;
143: status)
144: echo -n "Checking for $RACOON: "
145: ## Check status with checkproc(8), if process is running
146: ## checkproc will return with exit status 0.
147:
148: # Status has a slightly different for the status command:
149: # 0 - service running
150: # 1 - service dead, but /var/run/ pid file exists
151: # 2 - service dead, but /var/lock/ lock file exists
152: # 3 - service not running
153:
154: checkproc -p $RACOON_PIDFILE $RACOON_BIN
155: rc_status -v
156: ;;
157: probe)
158: ## Optional: Probe for the necessity of a reload,
159: ## give out the argument which is required for a reload.
160:
161: test "$RACOON_CONF" -nt "$RACOON_PIDFILE" && echo reload
162: ;;
163: *)
164: echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
165: exit 1
166: ;;
167: esac
168: rc_exit
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to racoon.init CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ipsec-tools / rpm / suse