Annotation of embedaddon/ipsec-tools/src/Makefile.in, revision 1.1.1.2.2.1

1.1.1.2.2.1! misho       1: # Makefile.in generated by automake 1.14 from Makefile.am.
1.1       misho       2: # @configure_input@
                      3: 
1.1.1.2.2.1! misho       4: # Copyright (C) 1994-2013 Free Software Foundation, Inc.
1.1.1.2   misho       5: 
1.1       misho       6: # This Makefile.in is free software; the Free Software Foundation
                      7: # gives unlimited permission to copy and/or distribute it,
                      8: # with or without modifications, as long as this notice is preserved.
                      9: 
                     10: # This program is distributed in the hope that it will be useful,
                     11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
                     12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
                     13: # PARTICULAR PURPOSE.
                     14: 
                     15: @SET_MAKE@
                     16: VPATH = @srcdir@
1.1.1.2.2.1! misho      17: am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
        !            18: am__make_running_with_option = \
        !            19:   case $${target_option-} in \
        !            20:       ?) ;; \
        !            21:       *) echo "am__make_running_with_option: internal error: invalid" \
        !            22:               "target option '$${target_option-}' specified" >&2; \
        !            23:          exit 1;; \
        !            24:   esac; \
        !            25:   has_opt=no; \
        !            26:   sane_makeflags=$$MAKEFLAGS; \
        !            27:   if $(am__is_gnu_make); then \
        !            28:     sane_makeflags=$$MFLAGS; \
        !            29:   else \
1.1.1.2   misho      30:     case $$MAKEFLAGS in \
                     31:       *\\[\ \  ]*) \
1.1.1.2.2.1! misho      32:         bs=\\; \
        !            33:         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
        !            34:           | sed "s/$$bs$$bs[$$bs $$bs  ]*//g"`;; \
        !            35:     esac; \
        !            36:   fi; \
        !            37:   skip_next=no; \
        !            38:   strip_trailopt () \
        !            39:   { \
        !            40:     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
        !            41:   }; \
        !            42:   for flg in $$sane_makeflags; do \
        !            43:     test $$skip_next = yes && { skip_next=no; continue; }; \
        !            44:     case $$flg in \
        !            45:       *=*|--*) continue;; \
        !            46:         -*I) strip_trailopt 'I'; skip_next=yes;; \
        !            47:       -*I?*) strip_trailopt 'I';; \
        !            48:         -*O) strip_trailopt 'O'; skip_next=yes;; \
        !            49:       -*O?*) strip_trailopt 'O';; \
        !            50:         -*l) strip_trailopt 'l'; skip_next=yes;; \
        !            51:       -*l?*) strip_trailopt 'l';; \
        !            52:       -[dEDm]) skip_next=yes;; \
        !            53:       -[JT]) skip_next=yes;; \
1.1.1.2   misho      54:     esac; \
1.1.1.2.2.1! misho      55:     case $$flg in \
        !            56:       *$$target_option*) has_opt=yes; break;; \
        !            57:     esac; \
        !            58:   done; \
        !            59:   test $$has_opt = yes
        !            60: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
        !            61: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
1.1       misho      62: pkgdatadir = $(datadir)/@PACKAGE@
                     63: pkgincludedir = $(includedir)/@PACKAGE@
                     64: pkglibdir = $(libdir)/@PACKAGE@
                     65: pkglibexecdir = $(libexecdir)/@PACKAGE@
                     66: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
                     67: install_sh_DATA = $(install_sh) -c -m 644
                     68: install_sh_PROGRAM = $(install_sh) -c
                     69: install_sh_SCRIPT = $(install_sh) -c
                     70: INSTALL_HEADER = $(INSTALL_DATA)
                     71: transform = $(program_transform_name)
                     72: NORMAL_INSTALL = :
                     73: PRE_INSTALL = :
                     74: POST_INSTALL = :
                     75: NORMAL_UNINSTALL = :
                     76: PRE_UNINSTALL = :
                     77: POST_UNINSTALL = :
                     78: build_triplet = @build@
                     79: host_triplet = @host@
                     80: subdir = src
1.1.1.2   misho      81: DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
1.1       misho      82: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
                     83: am__aclocal_m4_deps = $(top_srcdir)/acracoon.m4 \
                     84:        $(top_srcdir)/configure.ac
                     85: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
                     86:        $(ACLOCAL_M4)
                     87: mkinstalldirs = $(install_sh) -d
                     88: CONFIG_HEADER = $(top_builddir)/config.h
                     89: CONFIG_CLEAN_FILES =
                     90: CONFIG_CLEAN_VPATH_FILES =
1.1.1.2   misho      91: AM_V_P = $(am__v_P_@AM_V@)
                     92: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
                     93: am__v_P_0 = false
                     94: am__v_P_1 = :
                     95: AM_V_GEN = $(am__v_GEN_@AM_V@)
                     96: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
                     97: am__v_GEN_0 = @echo "  GEN     " $@;
                     98: am__v_GEN_1 = 
                     99: AM_V_at = $(am__v_at_@AM_V@)
                    100: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
                    101: am__v_at_0 = @
                    102: am__v_at_1 = 
1.1       misho     103: SOURCES =
                    104: DIST_SOURCES =
1.1.1.2   misho     105: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
                    106:        ctags-recursive dvi-recursive html-recursive info-recursive \
                    107:        install-data-recursive install-dvi-recursive \
                    108:        install-exec-recursive install-html-recursive \
                    109:        install-info-recursive install-pdf-recursive \
                    110:        install-ps-recursive install-recursive installcheck-recursive \
                    111:        installdirs-recursive pdf-recursive ps-recursive \
                    112:        tags-recursive uninstall-recursive
                    113: am__can_run_installinfo = \
                    114:   case $$AM_UPDATE_INFO_DIR in \
                    115:     n|no|NO) false;; \
                    116:     *) (install-info --version) >/dev/null 2>&1;; \
                    117:   esac
1.1       misho     118: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive        \
                    119:   distclean-recursive maintainer-clean-recursive
1.1.1.2   misho     120: am__recursive_targets = \
                    121:   $(RECURSIVE_TARGETS) \
                    122:   $(RECURSIVE_CLEAN_TARGETS) \
                    123:   $(am__extra_recursive_targets)
                    124: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
1.1       misho     125:        distdir
1.1.1.2   misho     126: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
                    127: # Read a list of newline-separated strings from the standard input,
                    128: # and print each of them once, without duplicates.  Input order is
                    129: # *not* preserved.
                    130: am__uniquify_input = $(AWK) '\
                    131:   BEGIN { nonempty = 0; } \
                    132:   { items[$$0] = 1; nonempty = 1; } \
                    133:   END { if (nonempty) { for (i in items) print i; }; } \
                    134: '
                    135: # Make sure the list of sources is unique.  This is necessary because,
                    136: # e.g., the same source file might be shared among _SOURCES variables
                    137: # for different programs/libraries.
                    138: am__define_uniq_tagged_files = \
                    139:   list='$(am__tagged_files)'; \
                    140:   unique=`for i in $$list; do \
                    141:     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
                    142:   done | $(am__uniquify_input)`
1.1       misho     143: ETAGS = etags
                    144: CTAGS = ctags
                    145: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
                    146: am__relativize = \
                    147:   dir0=`pwd`; \
                    148:   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
                    149:   sed_rest='s,^[^/]*/*,,'; \
                    150:   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
                    151:   sed_butlast='s,/*[^/]*$$,,'; \
                    152:   while test -n "$$dir1"; do \
                    153:     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
                    154:     if test "$$first" != "."; then \
                    155:       if test "$$first" = ".."; then \
                    156:         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
                    157:         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
                    158:       else \
                    159:         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
                    160:         if test "$$first2" = "$$first"; then \
                    161:           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
                    162:         else \
                    163:           dir2="../$$dir2"; \
                    164:         fi; \
                    165:         dir0="$$dir0"/"$$first"; \
                    166:       fi; \
                    167:     fi; \
                    168:     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
                    169:   done; \
                    170:   reldir="$$dir2"
                    171: ACLOCAL = @ACLOCAL@
                    172: AMTAR = @AMTAR@
1.1.1.2   misho     173: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
1.1       misho     174: AR = @AR@
                    175: AUTOCONF = @AUTOCONF@
                    176: AUTOHEADER = @AUTOHEADER@
                    177: AUTOMAKE = @AUTOMAKE@
                    178: AWK = @AWK@
                    179: CC = @CC@
                    180: CCDEPMODE = @CCDEPMODE@
                    181: CFLAGS = @CFLAGS@
                    182: CONFIGURE_AMFLAGS = @CONFIGURE_AMFLAGS@
                    183: CPP = @CPP@
                    184: CPPFLAGS = @CPPFLAGS@
                    185: CRYPTOBJS = @CRYPTOBJS@
                    186: CYGPATH_W = @CYGPATH_W@
                    187: DEFS = @DEFS@
                    188: DEPDIR = @DEPDIR@
1.1.1.2   misho     189: DLLTOOL = @DLLTOOL@
1.1       misho     190: DSYMUTIL = @DSYMUTIL@
                    191: DUMPBIN = @DUMPBIN@
                    192: ECHO_C = @ECHO_C@
                    193: ECHO_N = @ECHO_N@
                    194: ECHO_T = @ECHO_T@
                    195: EGREP = @EGREP@
                    196: EXEEXT = @EXEEXT@
                    197: EXTRA_CRYPTO = @EXTRA_CRYPTO@
                    198: FGREP = @FGREP@
                    199: FRAG_OBJS = @FRAG_OBJS@
                    200: GLIBC_BUGS = @GLIBC_BUGS@
                    201: GREP = @GREP@
                    202: HYBRID_OBJS = @HYBRID_OBJS@
                    203: INCLUDE_GLIBC = @INCLUDE_GLIBC@
                    204: INSTALL = @INSTALL@
                    205: INSTALL_DATA = @INSTALL_DATA@
                    206: INSTALL_OPTS = @INSTALL_OPTS@
                    207: INSTALL_PROGRAM = @INSTALL_PROGRAM@
                    208: INSTALL_SCRIPT = @INSTALL_SCRIPT@
                    209: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
                    210: KERNEL_INCLUDE = @KERNEL_INCLUDE@
                    211: KRB5_CONFIG = @KRB5_CONFIG@
                    212: LD = @LD@
                    213: LDFLAGS = @LDFLAGS@
                    214: LEX = @LEX@
                    215: LEXLIB = @LEXLIB@
                    216: LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
                    217: LIBOBJS = @LIBOBJS@
                    218: LIBS = @LIBS@
                    219: LIBTOOL = @LIBTOOL@
                    220: LIPO = @LIPO@
                    221: LN_S = @LN_S@
                    222: LTLIBOBJS = @LTLIBOBJS@
                    223: MAKEINFO = @MAKEINFO@
1.1.1.2   misho     224: MANIFEST_TOOL = @MANIFEST_TOOL@
1.1       misho     225: MKDIR_P = @MKDIR_P@
                    226: NATT_OBJS = @NATT_OBJS@
                    227: NM = @NM@
                    228: NMEDIT = @NMEDIT@
                    229: OBJDUMP = @OBJDUMP@
                    230: OBJEXT = @OBJEXT@
                    231: OTOOL = @OTOOL@
                    232: OTOOL64 = @OTOOL64@
                    233: PACKAGE = @PACKAGE@
                    234: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
                    235: PACKAGE_NAME = @PACKAGE_NAME@
                    236: PACKAGE_STRING = @PACKAGE_STRING@
                    237: PACKAGE_TARNAME = @PACKAGE_TARNAME@
                    238: PACKAGE_URL = @PACKAGE_URL@
                    239: PACKAGE_VERSION = @PACKAGE_VERSION@
                    240: PATH_SEPARATOR = @PATH_SEPARATOR@
                    241: RANLIB = @RANLIB@
                    242: RPM = @RPM@
                    243: SECCTX_OBJS = @SECCTX_OBJS@
                    244: SED = @SED@
                    245: SET_MAKE = @SET_MAKE@
                    246: SHELL = @SHELL@
                    247: STRIP = @STRIP@
                    248: VERSION = @VERSION@
                    249: YACC = @YACC@
                    250: YFLAGS = @YFLAGS@
                    251: abs_builddir = @abs_builddir@
                    252: abs_srcdir = @abs_srcdir@
                    253: abs_top_builddir = @abs_top_builddir@
                    254: abs_top_srcdir = @abs_top_srcdir@
1.1.1.2   misho     255: ac_ct_AR = @ac_ct_AR@
1.1       misho     256: ac_ct_CC = @ac_ct_CC@
                    257: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
                    258: am__include = @am__include@
                    259: am__leading_dot = @am__leading_dot@
                    260: am__quote = @am__quote@
                    261: am__tar = @am__tar@
                    262: am__untar = @am__untar@
                    263: bindir = @bindir@
                    264: build = @build@
                    265: build_alias = @build_alias@
                    266: build_cpu = @build_cpu@
                    267: build_os = @build_os@
                    268: build_vendor = @build_vendor@
                    269: builddir = @builddir@
                    270: datadir = @datadir@
                    271: datarootdir = @datarootdir@
                    272: docdir = @docdir@
                    273: dvidir = @dvidir@
                    274: exec_prefix = @exec_prefix@
                    275: host = @host@
                    276: host_alias = @host_alias@
                    277: host_cpu = @host_cpu@
                    278: host_os = @host_os@
                    279: host_vendor = @host_vendor@
                    280: htmldir = @htmldir@
                    281: include_racoondir = @include_racoondir@
                    282: includedir = @includedir@
                    283: infodir = @infodir@
                    284: install_sh = @install_sh@
                    285: libdir = @libdir@
                    286: libexecdir = @libexecdir@
                    287: localedir = @localedir@
                    288: localstatedir = @localstatedir@
                    289: mandir = @mandir@
                    290: mkdir_p = @mkdir_p@
                    291: oldincludedir = @oldincludedir@
                    292: pdfdir = @pdfdir@
                    293: prefix = @prefix@
                    294: program_transform_name = @program_transform_name@
                    295: psdir = @psdir@
                    296: sbindir = @sbindir@
                    297: sharedstatedir = @sharedstatedir@
                    298: srcdir = @srcdir@
                    299: sysconfdir = @sysconfdir@
                    300: target_alias = @target_alias@
                    301: top_build_prefix = @top_build_prefix@
                    302: top_builddir = @top_builddir@
                    303: top_srcdir = @top_srcdir@
                    304: SUBDIRS = @INCLUDE_GLIBC@ libipsec setkey racoon
                    305: DIST_SUBDIRS = include-glibc libipsec setkey racoon
                    306: all: all-recursive
                    307: 
                    308: .SUFFIXES:
                    309: $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
                    310:        @for dep in $?; do \
                    311:          case '$(am__configure_deps)' in \
                    312:            *$$dep*) \
                    313:              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
                    314:                && { if test -f $@; then exit 0; else break; fi; }; \
                    315:              exit 1;; \
                    316:          esac; \
                    317:        done; \
                    318:        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
                    319:        $(am__cd) $(top_srcdir) && \
                    320:          $(AUTOMAKE) --foreign src/Makefile
                    321: .PRECIOUS: Makefile
                    322: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
                    323:        @case '$?' in \
                    324:          *config.status*) \
                    325:            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
                    326:          *) \
                    327:            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
                    328:            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
                    329:        esac;
                    330: 
                    331: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
                    332:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
                    333: 
                    334: $(top_srcdir)/configure:  $(am__configure_deps)
                    335:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
                    336: $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
                    337:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
                    338: $(am__aclocal_m4_deps):
                    339: 
                    340: mostlyclean-libtool:
                    341:        -rm -f *.lo
                    342: 
                    343: clean-libtool:
                    344:        -rm -rf .libs _libs
                    345: 
                    346: # This directory's subdirectories are mostly independent; you can cd
1.1.1.2   misho     347: # into them and run 'make' without going through this Makefile.
                    348: # To change the values of 'make' variables: instead of editing Makefiles,
                    349: # (1) if the variable is set in 'config.status', edit 'config.status'
                    350: #     (which will cause the Makefiles to be regenerated when you run 'make');
                    351: # (2) otherwise, pass the desired values on the 'make' command line.
                    352: $(am__recursive_targets):
1.1.1.2.2.1! misho     353:        @fail=; \
        !           354:        if $(am__make_keepgoing); then \
        !           355:          failcom='fail=yes'; \
        !           356:        else \
        !           357:          failcom='exit 1'; \
        !           358:        fi; \
1.1       misho     359:        dot_seen=no; \
                    360:        target=`echo $@ | sed s/-recursive//`; \
1.1.1.2   misho     361:        case "$@" in \
                    362:          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
                    363:          *) list='$(SUBDIRS)' ;; \
                    364:        esac; \
                    365:        for subdir in $$list; do \
1.1       misho     366:          echo "Making $$target in $$subdir"; \
                    367:          if test "$$subdir" = "."; then \
                    368:            dot_seen=yes; \
                    369:            local_target="$$target-am"; \
                    370:          else \
                    371:            local_target="$$target"; \
                    372:          fi; \
                    373:          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
                    374:          || eval $$failcom; \
                    375:        done; \
                    376:        if test "$$dot_seen" = "no"; then \
                    377:          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
                    378:        fi; test -z "$$fail"
                    379: 
1.1.1.2   misho     380: ID: $(am__tagged_files)
                    381:        $(am__define_uniq_tagged_files); mkid -fID $$unique
                    382: tags: tags-recursive
                    383: TAGS: tags
1.1       misho     384: 
1.1.1.2   misho     385: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
1.1       misho     386:        set x; \
                    387:        here=`pwd`; \
                    388:        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
                    389:          include_option=--etags-include; \
                    390:          empty_fix=.; \
                    391:        else \
                    392:          include_option=--include; \
                    393:          empty_fix=; \
                    394:        fi; \
                    395:        list='$(SUBDIRS)'; for subdir in $$list; do \
                    396:          if test "$$subdir" = .; then :; else \
                    397:            test ! -f $$subdir/TAGS || \
                    398:              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
                    399:          fi; \
                    400:        done; \
1.1.1.2   misho     401:        $(am__define_uniq_tagged_files); \
1.1       misho     402:        shift; \
                    403:        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
                    404:          test -n "$$unique" || unique=$$empty_fix; \
                    405:          if test $$# -gt 0; then \
                    406:            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
                    407:              "$$@" $$unique; \
                    408:          else \
                    409:            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
                    410:              $$unique; \
                    411:          fi; \
                    412:        fi
1.1.1.2   misho     413: ctags: ctags-recursive
                    414: 
                    415: CTAGS: ctags
                    416: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
                    417:        $(am__define_uniq_tagged_files); \
1.1       misho     418:        test -z "$(CTAGS_ARGS)$$unique" \
                    419:          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
                    420:             $$unique
                    421: 
                    422: GTAGS:
                    423:        here=`$(am__cd) $(top_builddir) && pwd` \
                    424:          && $(am__cd) $(top_srcdir) \
                    425:          && gtags -i $(GTAGS_ARGS) "$$here"
1.1.1.2   misho     426: cscopelist: cscopelist-recursive
                    427: 
                    428: cscopelist-am: $(am__tagged_files)
                    429:        list='$(am__tagged_files)'; \
                    430:        case "$(srcdir)" in \
                    431:          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
                    432:          *) sdir=$(subdir)/$(srcdir) ;; \
                    433:        esac; \
                    434:        for i in $$list; do \
                    435:          if test -f "$$i"; then \
                    436:            echo "$(subdir)/$$i"; \
                    437:          else \
                    438:            echo "$$sdir/$$i"; \
                    439:          fi; \
                    440:        done >> $(top_builddir)/cscope.files
1.1       misho     441: 
                    442: distclean-tags:
                    443:        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
                    444: 
                    445: distdir: $(DISTFILES)
                    446:        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
                    447:        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
                    448:        list='$(DISTFILES)'; \
                    449:          dist_files=`for file in $$list; do echo $$file; done | \
                    450:          sed -e "s|^$$srcdirstrip/||;t" \
                    451:              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
                    452:        case $$dist_files in \
                    453:          */*) $(MKDIR_P) `echo "$$dist_files" | \
                    454:                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                    455:                           sort -u` ;; \
                    456:        esac; \
                    457:        for file in $$dist_files; do \
                    458:          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
                    459:          if test -d $$d/$$file; then \
                    460:            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
                    461:            if test -d "$(distdir)/$$file"; then \
                    462:              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
                    463:            fi; \
                    464:            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
                    465:              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
                    466:              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
                    467:            fi; \
                    468:            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
                    469:          else \
                    470:            test -f "$(distdir)/$$file" \
                    471:            || cp -p $$d/$$file "$(distdir)/$$file" \
                    472:            || exit 1; \
                    473:          fi; \
                    474:        done
                    475:        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
                    476:          if test "$$subdir" = .; then :; else \
1.1.1.2   misho     477:            $(am__make_dryrun) \
                    478:              || test -d "$(distdir)/$$subdir" \
                    479:              || $(MKDIR_P) "$(distdir)/$$subdir" \
                    480:              || exit 1; \
1.1       misho     481:            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
                    482:            $(am__relativize); \
                    483:            new_distdir=$$reldir; \
                    484:            dir1=$$subdir; dir2="$(top_distdir)"; \
                    485:            $(am__relativize); \
                    486:            new_top_distdir=$$reldir; \
                    487:            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
                    488:            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
                    489:            ($(am__cd) $$subdir && \
                    490:              $(MAKE) $(AM_MAKEFLAGS) \
                    491:                top_distdir="$$new_top_distdir" \
                    492:                distdir="$$new_distdir" \
                    493:                am__remove_distdir=: \
                    494:                am__skip_length_check=: \
                    495:                am__skip_mode_fix=: \
                    496:                distdir) \
                    497:              || exit 1; \
                    498:          fi; \
                    499:        done
                    500: check-am: all-am
                    501: check: check-recursive
                    502: all-am: Makefile
                    503: installdirs: installdirs-recursive
                    504: installdirs-am:
                    505: install: install-recursive
                    506: install-exec: install-exec-recursive
                    507: install-data: install-data-recursive
                    508: uninstall: uninstall-recursive
                    509: 
                    510: install-am: all-am
                    511:        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
                    512: 
                    513: installcheck: installcheck-recursive
                    514: install-strip:
1.1.1.2   misho     515:        if test -z '$(STRIP)'; then \
                    516:          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
                    517:            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
                    518:              install; \
                    519:        else \
                    520:          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
                    521:            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
                    522:            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
                    523:        fi
1.1       misho     524: mostlyclean-generic:
                    525: 
                    526: clean-generic:
                    527: 
                    528: distclean-generic:
                    529:        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
                    530:        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
                    531: 
                    532: maintainer-clean-generic:
                    533:        @echo "This command is intended for maintainers to use"
                    534:        @echo "it deletes files that may require special tools to rebuild."
                    535: clean: clean-recursive
                    536: 
                    537: clean-am: clean-generic clean-libtool mostlyclean-am
                    538: 
                    539: distclean: distclean-recursive
                    540:        -rm -f Makefile
                    541: distclean-am: clean-am distclean-generic distclean-tags
                    542: 
                    543: dvi: dvi-recursive
                    544: 
                    545: dvi-am:
                    546: 
                    547: html: html-recursive
                    548: 
                    549: html-am:
                    550: 
                    551: info: info-recursive
                    552: 
                    553: info-am:
                    554: 
                    555: install-data-am:
                    556: 
                    557: install-dvi: install-dvi-recursive
                    558: 
                    559: install-dvi-am:
                    560: 
                    561: install-exec-am:
                    562: 
                    563: install-html: install-html-recursive
                    564: 
                    565: install-html-am:
                    566: 
                    567: install-info: install-info-recursive
                    568: 
                    569: install-info-am:
                    570: 
                    571: install-man:
                    572: 
                    573: install-pdf: install-pdf-recursive
                    574: 
                    575: install-pdf-am:
                    576: 
                    577: install-ps: install-ps-recursive
                    578: 
                    579: install-ps-am:
                    580: 
                    581: installcheck-am:
                    582: 
                    583: maintainer-clean: maintainer-clean-recursive
                    584:        -rm -f Makefile
                    585: maintainer-clean-am: distclean-am maintainer-clean-generic
                    586: 
                    587: mostlyclean: mostlyclean-recursive
                    588: 
                    589: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
                    590: 
                    591: pdf: pdf-recursive
                    592: 
                    593: pdf-am:
                    594: 
                    595: ps: ps-recursive
                    596: 
                    597: ps-am:
                    598: 
                    599: uninstall-am:
                    600: 
1.1.1.2   misho     601: .MAKE: $(am__recursive_targets) install-am install-strip
1.1       misho     602: 
1.1.1.2   misho     603: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
                    604:        check-am clean clean-generic clean-libtool cscopelist-am ctags \
                    605:        ctags-am distclean distclean-generic distclean-libtool \
                    606:        distclean-tags distdir dvi dvi-am html html-am info info-am \
                    607:        install install-am install-data install-data-am install-dvi \
                    608:        install-dvi-am install-exec install-exec-am install-html \
                    609:        install-html-am install-info install-info-am install-man \
                    610:        install-pdf install-pdf-am install-ps install-ps-am \
                    611:        install-strip installcheck installcheck-am installdirs \
                    612:        installdirs-am maintainer-clean maintainer-clean-generic \
                    613:        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
                    614:        ps ps-am tags tags-am uninstall uninstall-am
1.1       misho     615: 
                    616: 
                    617: # Tell versions [3.59,3.63) of GNU make to not export all variables.
                    618: # Otherwise a system limit (for SysV at least) may be exceeded.
                    619: .NOEXPORT:

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>