1: # Makefile.in generated by automake 1.14.1 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994-2013 Free Software Foundation, Inc.
5:
6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
14:
15: @SET_MAKE@
16: VPATH = @srcdir@
17: am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
18: am__make_running_with_option = \
19: case $${target_option-} in \
20: ?) ;; \
21: *) echo "am__make_running_with_option: internal error: invalid" \
22: "target option '$${target_option-}' specified" >&2; \
23: exit 1;; \
24: esac; \
25: has_opt=no; \
26: sane_makeflags=$$MAKEFLAGS; \
27: if $(am__is_gnu_make); then \
28: sane_makeflags=$$MFLAGS; \
29: else \
30: case $$MAKEFLAGS in \
31: *\\[\ \ ]*) \
32: bs=\\; \
33: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
34: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
35: esac; \
36: fi; \
37: skip_next=no; \
38: strip_trailopt () \
39: { \
40: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
41: }; \
42: for flg in $$sane_makeflags; do \
43: test $$skip_next = yes && { skip_next=no; continue; }; \
44: case $$flg in \
45: *=*|--*) continue;; \
46: -*I) strip_trailopt 'I'; skip_next=yes;; \
47: -*I?*) strip_trailopt 'I';; \
48: -*O) strip_trailopt 'O'; skip_next=yes;; \
49: -*O?*) strip_trailopt 'O';; \
50: -*l) strip_trailopt 'l'; skip_next=yes;; \
51: -*l?*) strip_trailopt 'l';; \
52: -[dEDm]) skip_next=yes;; \
53: -[JT]) skip_next=yes;; \
54: esac; \
55: case $$flg in \
56: *$$target_option*) has_opt=yes; break;; \
57: esac; \
58: done; \
59: test $$has_opt = yes
60: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
61: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
62: pkgdatadir = $(datadir)/@PACKAGE@
63: pkgincludedir = $(includedir)/@PACKAGE@
64: pkglibdir = $(libdir)/@PACKAGE@
65: pkglibexecdir = $(libexecdir)/@PACKAGE@
66: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
67: install_sh_DATA = $(install_sh) -c -m 644
68: install_sh_PROGRAM = $(install_sh) -c
69: install_sh_SCRIPT = $(install_sh) -c
70: INSTALL_HEADER = $(INSTALL_DATA)
71: transform = $(program_transform_name)
72: NORMAL_INSTALL = :
73: PRE_INSTALL = :
74: POST_INSTALL = :
75: NORMAL_UNINSTALL = :
76: PRE_UNINSTALL = :
77: POST_UNINSTALL = :
78: build_triplet = @build@
79: host_triplet = @host@
80: subdir = src
81: DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
82: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
83: am__aclocal_m4_deps = $(top_srcdir)/acracoon.m4 \
84: $(top_srcdir)/configure.ac
85: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
86: $(ACLOCAL_M4)
87: mkinstalldirs = $(install_sh) -d
88: CONFIG_HEADER = $(top_builddir)/config.h
89: CONFIG_CLEAN_FILES =
90: CONFIG_CLEAN_VPATH_FILES =
91: AM_V_P = $(am__v_P_@AM_V@)
92: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
93: am__v_P_0 = false
94: am__v_P_1 = :
95: AM_V_GEN = $(am__v_GEN_@AM_V@)
96: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
97: am__v_GEN_0 = @echo " GEN " $@;
98: am__v_GEN_1 =
99: AM_V_at = $(am__v_at_@AM_V@)
100: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
101: am__v_at_0 = @
102: am__v_at_1 =
103: SOURCES =
104: DIST_SOURCES =
105: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
106: ctags-recursive dvi-recursive html-recursive info-recursive \
107: install-data-recursive install-dvi-recursive \
108: install-exec-recursive install-html-recursive \
109: install-info-recursive install-pdf-recursive \
110: install-ps-recursive install-recursive installcheck-recursive \
111: installdirs-recursive pdf-recursive ps-recursive \
112: tags-recursive uninstall-recursive
113: am__can_run_installinfo = \
114: case $$AM_UPDATE_INFO_DIR in \
115: n|no|NO) false;; \
116: *) (install-info --version) >/dev/null 2>&1;; \
117: esac
118: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
119: distclean-recursive maintainer-clean-recursive
120: am__recursive_targets = \
121: $(RECURSIVE_TARGETS) \
122: $(RECURSIVE_CLEAN_TARGETS) \
123: $(am__extra_recursive_targets)
124: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
125: distdir
126: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
127: # Read a list of newline-separated strings from the standard input,
128: # and print each of them once, without duplicates. Input order is
129: # *not* preserved.
130: am__uniquify_input = $(AWK) '\
131: BEGIN { nonempty = 0; } \
132: { items[$$0] = 1; nonempty = 1; } \
133: END { if (nonempty) { for (i in items) print i; }; } \
134: '
135: # Make sure the list of sources is unique. This is necessary because,
136: # e.g., the same source file might be shared among _SOURCES variables
137: # for different programs/libraries.
138: am__define_uniq_tagged_files = \
139: list='$(am__tagged_files)'; \
140: unique=`for i in $$list; do \
141: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
142: done | $(am__uniquify_input)`
143: ETAGS = etags
144: CTAGS = ctags
145: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
146: am__relativize = \
147: dir0=`pwd`; \
148: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
149: sed_rest='s,^[^/]*/*,,'; \
150: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
151: sed_butlast='s,/*[^/]*$$,,'; \
152: while test -n "$$dir1"; do \
153: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
154: if test "$$first" != "."; then \
155: if test "$$first" = ".."; then \
156: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
157: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
158: else \
159: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
160: if test "$$first2" = "$$first"; then \
161: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
162: else \
163: dir2="../$$dir2"; \
164: fi; \
165: dir0="$$dir0"/"$$first"; \
166: fi; \
167: fi; \
168: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
169: done; \
170: reldir="$$dir2"
171: ACLOCAL = @ACLOCAL@
172: AMTAR = @AMTAR@
173: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
174: AR = @AR@
175: AUTOCONF = @AUTOCONF@
176: AUTOHEADER = @AUTOHEADER@
177: AUTOMAKE = @AUTOMAKE@
178: AWK = @AWK@
179: CC = @CC@
180: CCDEPMODE = @CCDEPMODE@
181: CFLAGS = @CFLAGS@
182: CONFIGURE_AMFLAGS = @CONFIGURE_AMFLAGS@
183: CPP = @CPP@
184: CPPFLAGS = @CPPFLAGS@
185: CRYPTOBJS = @CRYPTOBJS@
186: CYGPATH_W = @CYGPATH_W@
187: DEFS = @DEFS@
188: DEPDIR = @DEPDIR@
189: DLLTOOL = @DLLTOOL@
190: DSYMUTIL = @DSYMUTIL@
191: DUMPBIN = @DUMPBIN@
192: ECHO_C = @ECHO_C@
193: ECHO_N = @ECHO_N@
194: ECHO_T = @ECHO_T@
195: EGREP = @EGREP@
196: EXEEXT = @EXEEXT@
197: EXTRA_CRYPTO = @EXTRA_CRYPTO@
198: FGREP = @FGREP@
199: FRAG_OBJS = @FRAG_OBJS@
200: GLIBC_BUGS = @GLIBC_BUGS@
201: GREP = @GREP@
202: HYBRID_OBJS = @HYBRID_OBJS@
203: INCLUDE_GLIBC = @INCLUDE_GLIBC@
204: INSTALL = @INSTALL@
205: INSTALL_DATA = @INSTALL_DATA@
206: INSTALL_OPTS = @INSTALL_OPTS@
207: INSTALL_PROGRAM = @INSTALL_PROGRAM@
208: INSTALL_SCRIPT = @INSTALL_SCRIPT@
209: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
210: KERNEL_INCLUDE = @KERNEL_INCLUDE@
211: KRB5_CONFIG = @KRB5_CONFIG@
212: LD = @LD@
213: LDFLAGS = @LDFLAGS@
214: LEX = @LEX@
215: LEXLIB = @LEXLIB@
216: LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
217: LIBOBJS = @LIBOBJS@
218: LIBS = @LIBS@
219: LIBTOOL = @LIBTOOL@
220: LIPO = @LIPO@
221: LN_S = @LN_S@
222: LTLIBOBJS = @LTLIBOBJS@
223: MAKEINFO = @MAKEINFO@
224: MANIFEST_TOOL = @MANIFEST_TOOL@
225: MKDIR_P = @MKDIR_P@
226: NATT_OBJS = @NATT_OBJS@
227: NM = @NM@
228: NMEDIT = @NMEDIT@
229: OBJDUMP = @OBJDUMP@
230: OBJEXT = @OBJEXT@
231: OTOOL = @OTOOL@
232: OTOOL64 = @OTOOL64@
233: PACKAGE = @PACKAGE@
234: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
235: PACKAGE_NAME = @PACKAGE_NAME@
236: PACKAGE_STRING = @PACKAGE_STRING@
237: PACKAGE_TARNAME = @PACKAGE_TARNAME@
238: PACKAGE_URL = @PACKAGE_URL@
239: PACKAGE_VERSION = @PACKAGE_VERSION@
240: PATH_SEPARATOR = @PATH_SEPARATOR@
241: RANLIB = @RANLIB@
242: RPM = @RPM@
243: SECCTX_OBJS = @SECCTX_OBJS@
244: SED = @SED@
245: SET_MAKE = @SET_MAKE@
246: SHELL = @SHELL@
247: STRIP = @STRIP@
248: VERSION = @VERSION@
249: YACC = @YACC@
250: YFLAGS = @YFLAGS@
251: abs_builddir = @abs_builddir@
252: abs_srcdir = @abs_srcdir@
253: abs_top_builddir = @abs_top_builddir@
254: abs_top_srcdir = @abs_top_srcdir@
255: ac_ct_AR = @ac_ct_AR@
256: ac_ct_CC = @ac_ct_CC@
257: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
258: am__include = @am__include@
259: am__leading_dot = @am__leading_dot@
260: am__quote = @am__quote@
261: am__tar = @am__tar@
262: am__untar = @am__untar@
263: bindir = @bindir@
264: build = @build@
265: build_alias = @build_alias@
266: build_cpu = @build_cpu@
267: build_os = @build_os@
268: build_vendor = @build_vendor@
269: builddir = @builddir@
270: datadir = @datadir@
271: datarootdir = @datarootdir@
272: docdir = @docdir@
273: dvidir = @dvidir@
274: exec_prefix = @exec_prefix@
275: host = @host@
276: host_alias = @host_alias@
277: host_cpu = @host_cpu@
278: host_os = @host_os@
279: host_vendor = @host_vendor@
280: htmldir = @htmldir@
281: include_racoondir = @include_racoondir@
282: includedir = @includedir@
283: infodir = @infodir@
284: install_sh = @install_sh@
285: libdir = @libdir@
286: libexecdir = @libexecdir@
287: localedir = @localedir@
288: localstatedir = @localstatedir@
289: mandir = @mandir@
290: mkdir_p = @mkdir_p@
291: oldincludedir = @oldincludedir@
292: pdfdir = @pdfdir@
293: prefix = @prefix@
294: program_transform_name = @program_transform_name@
295: psdir = @psdir@
296: sbindir = @sbindir@
297: sharedstatedir = @sharedstatedir@
298: srcdir = @srcdir@
299: sysconfdir = @sysconfdir@
300: target_alias = @target_alias@
301: top_build_prefix = @top_build_prefix@
302: top_builddir = @top_builddir@
303: top_srcdir = @top_srcdir@
304: SUBDIRS = @INCLUDE_GLIBC@ libipsec setkey racoon
305: DIST_SUBDIRS = include-glibc libipsec setkey racoon
306: all: all-recursive
307:
308: .SUFFIXES:
309: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
310: @for dep in $?; do \
311: case '$(am__configure_deps)' in \
312: *$$dep*) \
313: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
314: && { if test -f $@; then exit 0; else break; fi; }; \
315: exit 1;; \
316: esac; \
317: done; \
318: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
319: $(am__cd) $(top_srcdir) && \
320: $(AUTOMAKE) --foreign src/Makefile
321: .PRECIOUS: Makefile
322: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
323: @case '$?' in \
324: *config.status*) \
325: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
326: *) \
327: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
328: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
329: esac;
330:
331: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
332: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
333:
334: $(top_srcdir)/configure: $(am__configure_deps)
335: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
336: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
337: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
338: $(am__aclocal_m4_deps):
339:
340: mostlyclean-libtool:
341: -rm -f *.lo
342:
343: clean-libtool:
344: -rm -rf .libs _libs
345:
346: # This directory's subdirectories are mostly independent; you can cd
347: # into them and run 'make' without going through this Makefile.
348: # To change the values of 'make' variables: instead of editing Makefiles,
349: # (1) if the variable is set in 'config.status', edit 'config.status'
350: # (which will cause the Makefiles to be regenerated when you run 'make');
351: # (2) otherwise, pass the desired values on the 'make' command line.
352: $(am__recursive_targets):
353: @fail=; \
354: if $(am__make_keepgoing); then \
355: failcom='fail=yes'; \
356: else \
357: failcom='exit 1'; \
358: fi; \
359: dot_seen=no; \
360: target=`echo $@ | sed s/-recursive//`; \
361: case "$@" in \
362: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
363: *) list='$(SUBDIRS)' ;; \
364: esac; \
365: for subdir in $$list; do \
366: echo "Making $$target in $$subdir"; \
367: if test "$$subdir" = "."; then \
368: dot_seen=yes; \
369: local_target="$$target-am"; \
370: else \
371: local_target="$$target"; \
372: fi; \
373: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
374: || eval $$failcom; \
375: done; \
376: if test "$$dot_seen" = "no"; then \
377: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
378: fi; test -z "$$fail"
379:
380: ID: $(am__tagged_files)
381: $(am__define_uniq_tagged_files); mkid -fID $$unique
382: tags: tags-recursive
383: TAGS: tags
384:
385: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
386: set x; \
387: here=`pwd`; \
388: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
389: include_option=--etags-include; \
390: empty_fix=.; \
391: else \
392: include_option=--include; \
393: empty_fix=; \
394: fi; \
395: list='$(SUBDIRS)'; for subdir in $$list; do \
396: if test "$$subdir" = .; then :; else \
397: test ! -f $$subdir/TAGS || \
398: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
399: fi; \
400: done; \
401: $(am__define_uniq_tagged_files); \
402: shift; \
403: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
404: test -n "$$unique" || unique=$$empty_fix; \
405: if test $$# -gt 0; then \
406: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
407: "$$@" $$unique; \
408: else \
409: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
410: $$unique; \
411: fi; \
412: fi
413: ctags: ctags-recursive
414:
415: CTAGS: ctags
416: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
417: $(am__define_uniq_tagged_files); \
418: test -z "$(CTAGS_ARGS)$$unique" \
419: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
420: $$unique
421:
422: GTAGS:
423: here=`$(am__cd) $(top_builddir) && pwd` \
424: && $(am__cd) $(top_srcdir) \
425: && gtags -i $(GTAGS_ARGS) "$$here"
426: cscopelist: cscopelist-recursive
427:
428: cscopelist-am: $(am__tagged_files)
429: list='$(am__tagged_files)'; \
430: case "$(srcdir)" in \
431: [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
432: *) sdir=$(subdir)/$(srcdir) ;; \
433: esac; \
434: for i in $$list; do \
435: if test -f "$$i"; then \
436: echo "$(subdir)/$$i"; \
437: else \
438: echo "$$sdir/$$i"; \
439: fi; \
440: done >> $(top_builddir)/cscope.files
441:
442: distclean-tags:
443: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
444:
445: distdir: $(DISTFILES)
446: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
447: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
448: list='$(DISTFILES)'; \
449: dist_files=`for file in $$list; do echo $$file; done | \
450: sed -e "s|^$$srcdirstrip/||;t" \
451: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
452: case $$dist_files in \
453: */*) $(MKDIR_P) `echo "$$dist_files" | \
454: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
455: sort -u` ;; \
456: esac; \
457: for file in $$dist_files; do \
458: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
459: if test -d $$d/$$file; then \
460: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
461: if test -d "$(distdir)/$$file"; then \
462: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
463: fi; \
464: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
465: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
466: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
467: fi; \
468: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
469: else \
470: test -f "$(distdir)/$$file" \
471: || cp -p $$d/$$file "$(distdir)/$$file" \
472: || exit 1; \
473: fi; \
474: done
475: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
476: if test "$$subdir" = .; then :; else \
477: $(am__make_dryrun) \
478: || test -d "$(distdir)/$$subdir" \
479: || $(MKDIR_P) "$(distdir)/$$subdir" \
480: || exit 1; \
481: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
482: $(am__relativize); \
483: new_distdir=$$reldir; \
484: dir1=$$subdir; dir2="$(top_distdir)"; \
485: $(am__relativize); \
486: new_top_distdir=$$reldir; \
487: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
488: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
489: ($(am__cd) $$subdir && \
490: $(MAKE) $(AM_MAKEFLAGS) \
491: top_distdir="$$new_top_distdir" \
492: distdir="$$new_distdir" \
493: am__remove_distdir=: \
494: am__skip_length_check=: \
495: am__skip_mode_fix=: \
496: distdir) \
497: || exit 1; \
498: fi; \
499: done
500: check-am: all-am
501: check: check-recursive
502: all-am: Makefile
503: installdirs: installdirs-recursive
504: installdirs-am:
505: install: install-recursive
506: install-exec: install-exec-recursive
507: install-data: install-data-recursive
508: uninstall: uninstall-recursive
509:
510: install-am: all-am
511: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
512:
513: installcheck: installcheck-recursive
514: install-strip:
515: if test -z '$(STRIP)'; then \
516: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
517: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
518: install; \
519: else \
520: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
521: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
522: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
523: fi
524: mostlyclean-generic:
525:
526: clean-generic:
527:
528: distclean-generic:
529: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
530: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
531:
532: maintainer-clean-generic:
533: @echo "This command is intended for maintainers to use"
534: @echo "it deletes files that may require special tools to rebuild."
535: clean: clean-recursive
536:
537: clean-am: clean-generic clean-libtool mostlyclean-am
538:
539: distclean: distclean-recursive
540: -rm -f Makefile
541: distclean-am: clean-am distclean-generic distclean-tags
542:
543: dvi: dvi-recursive
544:
545: dvi-am:
546:
547: html: html-recursive
548:
549: html-am:
550:
551: info: info-recursive
552:
553: info-am:
554:
555: install-data-am:
556:
557: install-dvi: install-dvi-recursive
558:
559: install-dvi-am:
560:
561: install-exec-am:
562:
563: install-html: install-html-recursive
564:
565: install-html-am:
566:
567: install-info: install-info-recursive
568:
569: install-info-am:
570:
571: install-man:
572:
573: install-pdf: install-pdf-recursive
574:
575: install-pdf-am:
576:
577: install-ps: install-ps-recursive
578:
579: install-ps-am:
580:
581: installcheck-am:
582:
583: maintainer-clean: maintainer-clean-recursive
584: -rm -f Makefile
585: maintainer-clean-am: distclean-am maintainer-clean-generic
586:
587: mostlyclean: mostlyclean-recursive
588:
589: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
590:
591: pdf: pdf-recursive
592:
593: pdf-am:
594:
595: ps: ps-recursive
596:
597: ps-am:
598:
599: uninstall-am:
600:
601: .MAKE: $(am__recursive_targets) install-am install-strip
602:
603: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
604: check-am clean clean-generic clean-libtool cscopelist-am ctags \
605: ctags-am distclean distclean-generic distclean-libtool \
606: distclean-tags distdir dvi dvi-am html html-am info info-am \
607: install install-am install-data install-data-am install-dvi \
608: install-dvi-am install-exec install-exec-am install-html \
609: install-html-am install-info install-info-am install-man \
610: install-pdf install-pdf-am install-ps install-ps-am \
611: install-strip installcheck installcheck-am installdirs \
612: installdirs-am maintainer-clean maintainer-clean-generic \
613: mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
614: ps ps-am tags tags-am uninstall uninstall-am
615:
616:
617: # Tell versions [3.59,3.63) of GNU make to not export all variables.
618: # Otherwise a system limit (for SysV at least) may be exceeded.
619: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ipsec-tools / src