Annotation of embedaddon/ipsec-tools/src/Makefile, revision 1.1.1.1.2.3

1.1       misho       1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
                      2: # src/Makefile.  Generated from Makefile.in by configure.
                      3: 
                      4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
                      5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
                      6: # Inc.
                      7: # This Makefile.in is free software; the Free Software Foundation
                      8: # gives unlimited permission to copy and/or distribute it,
                      9: # with or without modifications, as long as this notice is preserved.
                     10: 
                     11: # This program is distributed in the hope that it will be useful,
                     12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
                     13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
                     14: # PARTICULAR PURPOSE.
                     15: 
                     16: 
                     17: 
                     18: pkgdatadir = $(datadir)/ipsec-tools
                     19: pkgincludedir = $(includedir)/ipsec-tools
                     20: pkglibdir = $(libdir)/ipsec-tools
                     21: pkglibexecdir = $(libexecdir)/ipsec-tools
                     22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
                     23: install_sh_DATA = $(install_sh) -c -m 644
                     24: install_sh_PROGRAM = $(install_sh) -c
                     25: install_sh_SCRIPT = $(install_sh) -c
                     26: INSTALL_HEADER = $(INSTALL_DATA)
                     27: transform = $(program_transform_name)
                     28: NORMAL_INSTALL = :
                     29: PRE_INSTALL = :
                     30: POST_INSTALL = :
                     31: NORMAL_UNINSTALL = :
                     32: PRE_UNINSTALL = :
                     33: POST_UNINSTALL = :
1.1.1.1.2.3! misho      34: build_triplet = i386-elwix-freebsd
        !            35: host_triplet = i386-elwix-freebsd
1.1       misho      36: subdir = src
                     37: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
                     38: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
                     39: am__aclocal_m4_deps = $(top_srcdir)/acracoon.m4 \
                     40:        $(top_srcdir)/configure.ac
                     41: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
                     42:        $(ACLOCAL_M4)
                     43: mkinstalldirs = $(install_sh) -d
                     44: CONFIG_HEADER = $(top_builddir)/config.h
                     45: CONFIG_CLEAN_FILES =
                     46: CONFIG_CLEAN_VPATH_FILES =
                     47: SOURCES =
                     48: DIST_SOURCES =
                     49: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
                     50:        html-recursive info-recursive install-data-recursive \
                     51:        install-dvi-recursive install-exec-recursive \
                     52:        install-html-recursive install-info-recursive \
                     53:        install-pdf-recursive install-ps-recursive install-recursive \
                     54:        installcheck-recursive installdirs-recursive pdf-recursive \
                     55:        ps-recursive uninstall-recursive
                     56: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive        \
                     57:   distclean-recursive maintainer-clean-recursive
                     58: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
                     59:        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
                     60:        distdir
                     61: ETAGS = etags
                     62: CTAGS = ctags
                     63: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
                     64: am__relativize = \
                     65:   dir0=`pwd`; \
                     66:   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
                     67:   sed_rest='s,^[^/]*/*,,'; \
                     68:   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
                     69:   sed_butlast='s,/*[^/]*$$,,'; \
                     70:   while test -n "$$dir1"; do \
                     71:     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
                     72:     if test "$$first" != "."; then \
                     73:       if test "$$first" = ".."; then \
                     74:         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
                     75:         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
                     76:       else \
                     77:         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
                     78:         if test "$$first2" = "$$first"; then \
                     79:           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
                     80:         else \
                     81:           dir2="../$$dir2"; \
                     82:         fi; \
                     83:         dir0="$$dir0"/"$$first"; \
                     84:       fi; \
                     85:     fi; \
                     86:     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
                     87:   done; \
                     88:   reldir="$$dir2"
1.1.1.1.2.1  misho      89: ACLOCAL = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run aclocal-1.11
                     90: AMTAR = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run tar
1.1       misho      91: AR = ar
1.1.1.1.2.1  misho      92: AUTOCONF = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run autoconf
                     93: AUTOHEADER = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run autoheader
                     94: AUTOMAKE = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run automake-1.11
1.1       misho      95: AWK = gawk
1.1.1.1.2.3! misho      96: CC = cc 
1.1       misho      97: CCDEPMODE = depmode=gcc3
1.1.1.1.2.1  misho      98: CFLAGS = -g -O2  -Wall -Werror -Wno-unused
1.1       misho      99: CONFIGURE_AMFLAGS = 
1.1.1.1.2.3! misho     100: CPP = cpp 
1.1       misho     101: CPPFLAGS =   -I${top_srcdir}/src/racoon/missing
                    102: CRYPTOBJS = 
                    103: CYGPATH_W = echo
                    104: DEFS = -DHAVE_CONFIG_H
                    105: DEPDIR = .deps
                    106: DSYMUTIL = 
                    107: DUMPBIN = 
                    108: ECHO_C = 
                    109: ECHO_N = -n
                    110: ECHO_T = 
                    111: EGREP = /usr/bin/grep -E
                    112: EXEEXT = 
                    113: EXTRA_CRYPTO = 
                    114: FGREP = /usr/bin/grep -F
                    115: FRAG_OBJS = isakmp_frag.o
                    116: GLIBC_BUGS = 
                    117: GREP = /usr/bin/grep
                    118: HYBRID_OBJS = isakmp_xauth.o isakmp_cfg.o isakmp_unity.o throttle.o
                    119: INCLUDE_GLIBC = 
1.1.1.1.2.3! misho     120: INSTALL = /home/misho/work/elwix/build/1.9/obj/i386/home/fbsd_work.src/src/tmp/legacy/usr/bin/install -c
1.1.1.1.2.1  misho     121: INSTALL_DATA = ${INSTALL} -m 644
1.1       misho     122: INSTALL_OPTS = 
1.1.1.1.2.1  misho     123: INSTALL_PROGRAM = ${INSTALL}
                    124: INSTALL_SCRIPT = ${INSTALL}
1.1       misho     125: INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
                    126: KERNEL_INCLUDE = 
                    127: KRB5_CONFIG = /usr/bin/krb5-config
1.1.1.1.2.3! misho     128: LD = ld
1.1.1.1.2.1  misho     129: LDFLAGS = 
1.1       misho     130: LEX = flex
                    131: LEXLIB = -lfl
                    132: LEX_OUTPUT_ROOT = lex.yy
                    133: LIBOBJS = 
                    134: LIBS = -lradius -lcrypto  -lreadline -lcrypt -lcrypt -L/lib -R/lib -lradius
                    135: LIBTOOL = $(SHELL) /usr/local/bin/libtool
                    136: LIPO = 
                    137: LN_S = ln -s
                    138: LTLIBOBJS = 
1.1.1.1.2.1  misho     139: MAKEINFO = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/missing --run makeinfo
1.1       misho     140: MKDIR_P = .././install-sh -c -d
                    141: NATT_OBJS = nattraversal.o
1.1.1.1.2.3! misho     142: NM = nm
1.1       misho     143: NMEDIT = 
                    144: OBJDUMP = objdump
                    145: OBJEXT = o
                    146: OTOOL = 
                    147: OTOOL64 = 
                    148: PACKAGE = ipsec-tools
                    149: PACKAGE_BUGREPORT = 
                    150: PACKAGE_NAME = ipsec-tools
                    151: PACKAGE_STRING = ipsec-tools 0.8.0
                    152: PACKAGE_TARNAME = ipsec-tools
                    153: PACKAGE_URL = 
                    154: PACKAGE_VERSION = 0.8.0
                    155: PATH_SEPARATOR = :
                    156: RANLIB = ranlib
                    157: RPM = 
                    158: SECCTX_OBJS = 
                    159: SED = /usr/bin/sed
                    160: SET_MAKE = 
                    161: SHELL = /bin/sh
                    162: STRIP = strip
                    163: VERSION = 0.8.0
                    164: YACC = bison -y
                    165: YFLAGS = 
1.1.1.1.2.1  misho     166: abs_builddir = /home/misho/work/embedaddon/ipsec-tools/src
                    167: abs_srcdir = /home/misho/work/embedaddon/ipsec-tools/src
                    168: abs_top_builddir = /home/misho/work/embedaddon/ipsec-tools
                    169: abs_top_srcdir = /home/misho/work/embedaddon/ipsec-tools
1.1.1.1.2.3! misho     170: ac_ct_CC = cc 
1.1       misho     171: ac_ct_DUMPBIN = 
                    172: am__include = include
                    173: am__leading_dot = .
                    174: am__quote = 
                    175: am__tar = ${AMTAR} chof - "$$tardir"
                    176: am__untar = ${AMTAR} xf -
                    177: bindir = ${exec_prefix}/bin
1.1.1.1.2.3! misho     178: build = i386-elwix-freebsd
        !           179: build_alias = i386-elwix-freebsd
1.1       misho     180: build_cpu = i386
1.1.1.1.2.3! misho     181: build_os = freebsd
        !           182: build_vendor = elwix
1.1       misho     183: builddir = .
                    184: datadir = ${datarootdir}
                    185: datarootdir = ${prefix}/share
                    186: docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
                    187: dvidir = ${docdir}
                    188: exec_prefix = ${prefix}
1.1.1.1.2.3! misho     189: host = i386-elwix-freebsd
1.1       misho     190: host_alias = 
                    191: host_cpu = i386
1.1.1.1.2.3! misho     192: host_os = freebsd
        !           193: host_vendor = elwix
1.1       misho     194: htmldir = ${docdir}
                    195: include_racoondir = ${prefix}/include/racoon
                    196: includedir = ${prefix}/include
1.1.1.1.2.1  misho     197: infodir = ${datarootdir}/info
                    198: install_sh = ${SHELL} /home/misho/work/embedaddon/ipsec-tools/install-sh
1.1       misho     199: libdir = ${exec_prefix}/lib
                    200: libexecdir = ${exec_prefix}/libexec
                    201: localedir = ${datarootdir}/locale
1.1.1.1.2.1  misho     202: localstatedir = /var/run
1.1       misho     203: lt_ECHO = echo
1.1.1.1.2.1  misho     204: mandir = ${datarootdir}/man
1.1       misho     205: mkdir_p = $(top_builddir)/./install-sh -c -d
                    206: oldincludedir = /usr/include
                    207: pdfdir = ${docdir}
1.1.1.1.2.3! misho     208: prefix = /home/misho/work/elwix/build/1.9/arch/i386/pkg
1.1       misho     209: program_transform_name = s,x,x,
                    210: psdir = ${docdir}
                    211: sbindir = ${exec_prefix}/sbin
                    212: sharedstatedir = ${prefix}/com
                    213: srcdir = .
1.1.1.1.2.1  misho     214: sysconfdir = /etc/racoon
1.1       misho     215: target_alias = 
                    216: top_build_prefix = ../
                    217: top_builddir = ..
                    218: top_srcdir = ..
                    219: SUBDIRS =  libipsec setkey racoon
                    220: DIST_SUBDIRS = include-glibc libipsec setkey racoon
                    221: all: all-recursive
                    222: 
                    223: .SUFFIXES:
                    224: $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
                    225:        @for dep in $?; do \
                    226:          case '$(am__configure_deps)' in \
                    227:            *$$dep*) \
                    228:              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
                    229:                && { if test -f $@; then exit 0; else break; fi; }; \
                    230:              exit 1;; \
                    231:          esac; \
                    232:        done; \
                    233:        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
                    234:        $(am__cd) $(top_srcdir) && \
                    235:          $(AUTOMAKE) --foreign src/Makefile
                    236: .PRECIOUS: Makefile
                    237: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
                    238:        @case '$?' in \
                    239:          *config.status*) \
                    240:            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
                    241:          *) \
                    242:            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
                    243:            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
                    244:        esac;
                    245: 
                    246: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
                    247:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
                    248: 
                    249: $(top_srcdir)/configure:  $(am__configure_deps)
                    250:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
                    251: $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
                    252:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
                    253: $(am__aclocal_m4_deps):
                    254: 
                    255: mostlyclean-libtool:
                    256:        -rm -f *.lo
                    257: 
                    258: clean-libtool:
                    259:        -rm -rf .libs _libs
                    260: 
                    261: # This directory's subdirectories are mostly independent; you can cd
                    262: # into them and run `make' without going through this Makefile.
                    263: # To change the values of `make' variables: instead of editing Makefiles,
                    264: # (1) if the variable is set in `config.status', edit `config.status'
                    265: #     (which will cause the Makefiles to be regenerated when you run `make');
                    266: # (2) otherwise, pass the desired values on the `make' command line.
                    267: $(RECURSIVE_TARGETS):
                    268:        @fail= failcom='exit 1'; \
                    269:        for f in x $$MAKEFLAGS; do \
                    270:          case $$f in \
                    271:            *=* | --[!k]*);; \
                    272:            *k*) failcom='fail=yes';; \
                    273:          esac; \
                    274:        done; \
                    275:        dot_seen=no; \
                    276:        target=`echo $@ | sed s/-recursive//`; \
                    277:        list='$(SUBDIRS)'; for subdir in $$list; do \
                    278:          echo "Making $$target in $$subdir"; \
                    279:          if test "$$subdir" = "."; then \
                    280:            dot_seen=yes; \
                    281:            local_target="$$target-am"; \
                    282:          else \
                    283:            local_target="$$target"; \
                    284:          fi; \
                    285:          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
                    286:          || eval $$failcom; \
                    287:        done; \
                    288:        if test "$$dot_seen" = "no"; then \
                    289:          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
                    290:        fi; test -z "$$fail"
                    291: 
                    292: $(RECURSIVE_CLEAN_TARGETS):
                    293:        @fail= failcom='exit 1'; \
                    294:        for f in x $$MAKEFLAGS; do \
                    295:          case $$f in \
                    296:            *=* | --[!k]*);; \
                    297:            *k*) failcom='fail=yes';; \
                    298:          esac; \
                    299:        done; \
                    300:        dot_seen=no; \
                    301:        case "$@" in \
                    302:          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
                    303:          *) list='$(SUBDIRS)' ;; \
                    304:        esac; \
                    305:        rev=''; for subdir in $$list; do \
                    306:          if test "$$subdir" = "."; then :; else \
                    307:            rev="$$subdir $$rev"; \
                    308:          fi; \
                    309:        done; \
                    310:        rev="$$rev ."; \
                    311:        target=`echo $@ | sed s/-recursive//`; \
                    312:        for subdir in $$rev; do \
                    313:          echo "Making $$target in $$subdir"; \
                    314:          if test "$$subdir" = "."; then \
                    315:            local_target="$$target-am"; \
                    316:          else \
                    317:            local_target="$$target"; \
                    318:          fi; \
                    319:          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
                    320:          || eval $$failcom; \
                    321:        done && test -z "$$fail"
                    322: tags-recursive:
                    323:        list='$(SUBDIRS)'; for subdir in $$list; do \
                    324:          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
                    325:        done
                    326: ctags-recursive:
                    327:        list='$(SUBDIRS)'; for subdir in $$list; do \
                    328:          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
                    329:        done
                    330: 
                    331: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
                    332:        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
                    333:        unique=`for i in $$list; do \
                    334:            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
                    335:          done | \
                    336:          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
                    337:              END { if (nonempty) { for (i in files) print i; }; }'`; \
                    338:        mkid -fID $$unique
                    339: tags: TAGS
                    340: 
                    341: TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                    342:                $(TAGS_FILES) $(LISP)
                    343:        set x; \
                    344:        here=`pwd`; \
                    345:        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
                    346:          include_option=--etags-include; \
                    347:          empty_fix=.; \
                    348:        else \
                    349:          include_option=--include; \
                    350:          empty_fix=; \
                    351:        fi; \
                    352:        list='$(SUBDIRS)'; for subdir in $$list; do \
                    353:          if test "$$subdir" = .; then :; else \
                    354:            test ! -f $$subdir/TAGS || \
                    355:              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
                    356:          fi; \
                    357:        done; \
                    358:        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
                    359:        unique=`for i in $$list; do \
                    360:            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
                    361:          done | \
                    362:          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
                    363:              END { if (nonempty) { for (i in files) print i; }; }'`; \
                    364:        shift; \
                    365:        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
                    366:          test -n "$$unique" || unique=$$empty_fix; \
                    367:          if test $$# -gt 0; then \
                    368:            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
                    369:              "$$@" $$unique; \
                    370:          else \
                    371:            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
                    372:              $$unique; \
                    373:          fi; \
                    374:        fi
                    375: ctags: CTAGS
                    376: CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                    377:                $(TAGS_FILES) $(LISP)
                    378:        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
                    379:        unique=`for i in $$list; do \
                    380:            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
                    381:          done | \
                    382:          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
                    383:              END { if (nonempty) { for (i in files) print i; }; }'`; \
                    384:        test -z "$(CTAGS_ARGS)$$unique" \
                    385:          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
                    386:             $$unique
                    387: 
                    388: GTAGS:
                    389:        here=`$(am__cd) $(top_builddir) && pwd` \
                    390:          && $(am__cd) $(top_srcdir) \
                    391:          && gtags -i $(GTAGS_ARGS) "$$here"
                    392: 
                    393: distclean-tags:
                    394:        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
                    395: 
                    396: distdir: $(DISTFILES)
                    397:        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
                    398:        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
                    399:        list='$(DISTFILES)'; \
                    400:          dist_files=`for file in $$list; do echo $$file; done | \
                    401:          sed -e "s|^$$srcdirstrip/||;t" \
                    402:              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
                    403:        case $$dist_files in \
                    404:          */*) $(MKDIR_P) `echo "$$dist_files" | \
                    405:                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                    406:                           sort -u` ;; \
                    407:        esac; \
                    408:        for file in $$dist_files; do \
                    409:          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
                    410:          if test -d $$d/$$file; then \
                    411:            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
                    412:            if test -d "$(distdir)/$$file"; then \
                    413:              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
                    414:            fi; \
                    415:            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
                    416:              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
                    417:              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
                    418:            fi; \
                    419:            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
                    420:          else \
                    421:            test -f "$(distdir)/$$file" \
                    422:            || cp -p $$d/$$file "$(distdir)/$$file" \
                    423:            || exit 1; \
                    424:          fi; \
                    425:        done
                    426:        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
                    427:          if test "$$subdir" = .; then :; else \
                    428:            test -d "$(distdir)/$$subdir" \
                    429:            || $(MKDIR_P) "$(distdir)/$$subdir" \
                    430:            || exit 1; \
                    431:          fi; \
                    432:        done
                    433:        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
                    434:          if test "$$subdir" = .; then :; else \
                    435:            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
                    436:            $(am__relativize); \
                    437:            new_distdir=$$reldir; \
                    438:            dir1=$$subdir; dir2="$(top_distdir)"; \
                    439:            $(am__relativize); \
                    440:            new_top_distdir=$$reldir; \
                    441:            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
                    442:            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
                    443:            ($(am__cd) $$subdir && \
                    444:              $(MAKE) $(AM_MAKEFLAGS) \
                    445:                top_distdir="$$new_top_distdir" \
                    446:                distdir="$$new_distdir" \
                    447:                am__remove_distdir=: \
                    448:                am__skip_length_check=: \
                    449:                am__skip_mode_fix=: \
                    450:                distdir) \
                    451:              || exit 1; \
                    452:          fi; \
                    453:        done
                    454: check-am: all-am
                    455: check: check-recursive
                    456: all-am: Makefile
                    457: installdirs: installdirs-recursive
                    458: installdirs-am:
                    459: install: install-recursive
                    460: install-exec: install-exec-recursive
                    461: install-data: install-data-recursive
                    462: uninstall: uninstall-recursive
                    463: 
                    464: install-am: all-am
                    465:        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
                    466: 
                    467: installcheck: installcheck-recursive
                    468: install-strip:
                    469:        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
                    470:          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
                    471:          `test -z '$(STRIP)' || \
                    472:            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
                    473: mostlyclean-generic:
                    474: 
                    475: clean-generic:
                    476: 
                    477: distclean-generic:
                    478:        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
                    479:        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
                    480: 
                    481: maintainer-clean-generic:
                    482:        @echo "This command is intended for maintainers to use"
                    483:        @echo "it deletes files that may require special tools to rebuild."
                    484: clean: clean-recursive
                    485: 
                    486: clean-am: clean-generic clean-libtool mostlyclean-am
                    487: 
                    488: distclean: distclean-recursive
                    489:        -rm -f Makefile
                    490: distclean-am: clean-am distclean-generic distclean-tags
                    491: 
                    492: dvi: dvi-recursive
                    493: 
                    494: dvi-am:
                    495: 
                    496: html: html-recursive
                    497: 
                    498: html-am:
                    499: 
                    500: info: info-recursive
                    501: 
                    502: info-am:
                    503: 
                    504: install-data-am:
                    505: 
                    506: install-dvi: install-dvi-recursive
                    507: 
                    508: install-dvi-am:
                    509: 
                    510: install-exec-am:
                    511: 
                    512: install-html: install-html-recursive
                    513: 
                    514: install-html-am:
                    515: 
                    516: install-info: install-info-recursive
                    517: 
                    518: install-info-am:
                    519: 
                    520: install-man:
                    521: 
                    522: install-pdf: install-pdf-recursive
                    523: 
                    524: install-pdf-am:
                    525: 
                    526: install-ps: install-ps-recursive
                    527: 
                    528: install-ps-am:
                    529: 
                    530: installcheck-am:
                    531: 
                    532: maintainer-clean: maintainer-clean-recursive
                    533:        -rm -f Makefile
                    534: maintainer-clean-am: distclean-am maintainer-clean-generic
                    535: 
                    536: mostlyclean: mostlyclean-recursive
                    537: 
                    538: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
                    539: 
                    540: pdf: pdf-recursive
                    541: 
                    542: pdf-am:
                    543: 
                    544: ps: ps-recursive
                    545: 
                    546: ps-am:
                    547: 
                    548: uninstall-am:
                    549: 
                    550: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
                    551:        install-am install-strip tags-recursive
                    552: 
                    553: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
                    554:        all all-am check check-am clean clean-generic clean-libtool \
                    555:        ctags ctags-recursive distclean distclean-generic \
                    556:        distclean-libtool distclean-tags distdir dvi dvi-am html \
                    557:        html-am info info-am install install-am install-data \
                    558:        install-data-am install-dvi install-dvi-am install-exec \
                    559:        install-exec-am install-html install-html-am install-info \
                    560:        install-info-am install-man install-pdf install-pdf-am \
                    561:        install-ps install-ps-am install-strip installcheck \
                    562:        installcheck-am installdirs installdirs-am maintainer-clean \
                    563:        maintainer-clean-generic mostlyclean mostlyclean-generic \
                    564:        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
                    565:        uninstall uninstall-am
                    566: 
                    567: 
                    568: # Tell versions [3.59,3.63) of GNU make to not export all variables.
                    569: # Otherwise a system limit (for SysV at least) may be exceeded.
                    570: .NOEXPORT:

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>