Annotation of embedaddon/ipsec-tools/src/libipsec/policy_parse.y, revision 1.1.1.1

1.1       misho       1: /*     $NetBSD: policy_parse.y,v 1.11 2009/02/16 18:36:21 tteras Exp $ */
                      2: 
                      3: /*     $KAME: policy_parse.y,v 1.21 2003/12/12 08:01:26 itojun Exp $   */
                      4: 
                      5: /*
                      6:  * Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project.
                      7:  * All rights reserved.
                      8:  *
                      9:  * Redistribution and use in source and binary forms, with or without
                     10:  * modification, are permitted provided that the following conditions
                     11:  * are met:
                     12:  * 1. Redistributions of source code must retain the above copyright
                     13:  *    notice, this list of conditions and the following disclaimer.
                     14:  * 2. Redistributions in binary form must reproduce the above copyright
                     15:  *    notice, this list of conditions and the following disclaimer in the
                     16:  *    documentation and/or other materials provided with the distribution.
                     17:  * 3. Neither the name of the project nor the names of its contributors
                     18:  *    may be used to endorse or promote products derived from this software
                     19:  *    without specific prior written permission.
                     20:  *
                     21:  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
                     22:  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
                     23:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
                     24:  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
                     25:  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
                     26:  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
                     27:  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
                     28:  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
                     29:  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
                     30:  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
                     31:  * SUCH DAMAGE.
                     32:  */
                     33: 
                     34: /*
                     35:  * IN/OUT bound policy configuration take place such below:
                     36:  *     in <priority> <policy>
                     37:  *     out <priority> <policy>
                     38:  *
                     39:  * <priority> is one of the following:
                     40:  * priority <signed int> where the integer is an offset from the default
                     41:  *                       priority, where negative numbers indicate lower
                     42:  *                       priority (towards end of list) and positive numbers 
                     43:  *                       indicate higher priority (towards beginning of list)
                     44:  *
                     45:  * priority {low,def,high} {+,-} <unsigned int>  where low and high are
                     46:  *                                               constants which are closer
                     47:  *                                               to the end of the list and
                     48:  *                                               beginning of the list,
                     49:  *                                               respectively
                     50:  *
                     51:  * <policy> is one of following:
                     52:  *     "discard", "none", "ipsec <requests>", "entrust", "bypass",
                     53:  *
                     54:  * The following requests are accepted as <requests>:
                     55:  *
                     56:  *     protocol/mode/src-dst/level
                     57:  *     protocol/mode/src-dst           parsed as protocol/mode/src-dst/default
                     58:  *     protocol/mode/src-dst/          parsed as protocol/mode/src-dst/default
                     59:  *     protocol/transport              parsed as protocol/mode/any-any/default
                     60:  *     protocol/transport//level       parsed as protocol/mode/any-any/level
                     61:  *
                     62:  * You can concatenate these requests with either ' '(single space) or '\n'.
                     63:  */
                     64: 
                     65: %{
                     66: #ifdef HAVE_CONFIG_H
                     67: #include "config.h"
                     68: #endif
                     69: 
                     70: #include <sys/types.h>
                     71: #include <sys/param.h>
                     72: #include <sys/socket.h>
                     73: 
                     74: #include <netinet/in.h>
                     75: #include PATH_IPSEC_H
                     76: 
                     77: #include <stdlib.h>
                     78: #include <stdio.h>
                     79: #include <string.h>
                     80: #include <netdb.h>
                     81: 
                     82: #include <errno.h>
                     83: 
                     84: #include "config.h"
                     85: 
                     86: #include "ipsec_strerror.h"
                     87: #include "libpfkey.h"
                     88: 
                     89: #ifndef INT32_MAX
                     90: #define INT32_MAX      (0xffffffff)
                     91: #endif
                     92: 
                     93: #ifndef INT32_MIN
                     94: #define INT32_MIN      (-INT32_MAX-1)
                     95: #endif
                     96: 
                     97: #define ATOX(c) \
                     98:   (isdigit(c) ? (c - '0') : (isupper(c) ? (c - 'A' + 10) : (c - 'a' + 10) ))
                     99: 
                    100: static u_int8_t *pbuf = NULL;          /* sadb_x_policy buffer */
                    101: static int tlen = 0;                   /* total length of pbuf */
                    102: static int offset = 0;                 /* offset of pbuf */
                    103: static int p_dir, p_type, p_protocol, p_mode, p_level, p_reqid;
                    104: static u_int32_t p_priority = 0;
                    105: static long p_priority_offset = 0;
                    106: static struct sockaddr *p_src = NULL;
                    107: static struct sockaddr *p_dst = NULL;
                    108: 
                    109: struct _val;
                    110: extern void yyerror __P((char *msg));
                    111: static struct sockaddr *parse_sockaddr __P((struct _val *addrbuf,
                    112:     struct _val *portbuf));
                    113: static int rule_check __P((void));
                    114: static int init_x_policy __P((void));
                    115: static int set_x_request __P((struct sockaddr *, struct sockaddr *));
                    116: static int set_sockaddr __P((struct sockaddr *));
                    117: static void policy_parse_request_init __P((void));
                    118: static void *policy_parse __P((const char *, int));
                    119: 
                    120: extern void __policy__strbuffer__init__ __P((const char *));
                    121: extern void __policy__strbuffer__free__ __P((void));
                    122: extern int yyparse __P((void));
                    123: extern int yylex __P((void));
                    124: 
                    125: extern char *__libipsectext;   /*XXX*/
                    126: 
                    127: %}
                    128: 
                    129: %union {
                    130:        u_int num;
                    131:        u_int32_t num32;
                    132:        struct _val {
                    133:                int len;
                    134:                char *buf;
                    135:        } val;
                    136: }
                    137: 
                    138: %token DIR 
                    139: %token PRIORITY PLUS
                    140: %token <num32> PRIO_BASE 
                    141: %token <val> PRIO_OFFSET 
                    142: %token ACTION PROTOCOL MODE LEVEL LEVEL_SPECIFY IPADDRESS PORT
                    143: %token ME ANY
                    144: %token SLASH HYPHEN
                    145: %type <num> DIR PRIORITY ACTION PROTOCOL MODE LEVEL
                    146: %type <val> IPADDRESS LEVEL_SPECIFY PORT
                    147: 
                    148: %%
                    149: policy_spec
                    150:        :       DIR ACTION
                    151:                {
                    152:                        p_dir = $1;
                    153:                        p_type = $2;
                    154: 
                    155: #ifdef HAVE_PFKEY_POLICY_PRIORITY
                    156:                        p_priority = PRIORITY_DEFAULT;
                    157: #else
                    158:                        p_priority = 0;
                    159: #endif
                    160: 
                    161:                        if (init_x_policy())
                    162:                                return -1;
                    163:                }
                    164:                rules
                    165:        |       DIR PRIORITY PRIO_OFFSET ACTION
                    166:                {
                    167:                        p_dir = $1;
                    168:                        p_type = $4;
                    169:                        p_priority_offset = -atol($3.buf);
                    170: 
                    171:                        errno = 0;
                    172:                        if (errno != 0 || p_priority_offset < INT32_MIN)
                    173:                        {
                    174:                                __ipsec_errcode = EIPSEC_INVAL_PRIORITY_OFFSET;
                    175:                                return -1;
                    176:                        }
                    177: 
                    178:                        p_priority = PRIORITY_DEFAULT + (u_int32_t) p_priority_offset;
                    179: 
                    180:                        if (init_x_policy())
                    181:                                return -1;
                    182:                }
                    183:                rules
                    184:        |       DIR PRIORITY HYPHEN PRIO_OFFSET ACTION
                    185:                {
                    186:                        p_dir = $1;
                    187:                        p_type = $5;
                    188: 
                    189:                        errno = 0;
                    190:                        p_priority_offset = atol($4.buf);
                    191: 
                    192:                        if (errno != 0 || p_priority_offset > INT32_MAX)
                    193:                        {
                    194:                                __ipsec_errcode = EIPSEC_INVAL_PRIORITY_OFFSET;
                    195:                                return -1;
                    196:                        }
                    197: 
                    198:                        /* negative input value means lower priority, therefore higher
                    199:                           actual value so that is closer to the end of the list */
                    200:                        p_priority = PRIORITY_DEFAULT + (u_int32_t) p_priority_offset;
                    201: 
                    202:                        if (init_x_policy())
                    203:                                return -1;
                    204:                }
                    205:                rules
                    206:        |       DIR PRIORITY PRIO_BASE ACTION
                    207:                {
                    208:                        p_dir = $1;
                    209:                        p_type = $4;
                    210: 
                    211:                        p_priority = $3;
                    212: 
                    213:                        if (init_x_policy())
                    214:                                return -1;
                    215:                }
                    216:                rules
                    217:        |       DIR PRIORITY PRIO_BASE PLUS PRIO_OFFSET ACTION
                    218:                {
                    219:                        p_dir = $1;
                    220:                        p_type = $6;
                    221: 
                    222:                        errno = 0;
                    223:                        p_priority_offset = atol($5.buf);
                    224: 
                    225:                        if (errno != 0 || p_priority_offset > PRIORITY_OFFSET_NEGATIVE_MAX)
                    226:                        {
                    227:                                __ipsec_errcode = EIPSEC_INVAL_PRIORITY_BASE_OFFSET;
                    228:                                return -1;
                    229:                        }
                    230: 
                    231:                        /* adding value means higher priority, therefore lower
                    232:                           actual value so that is closer to the beginning of the list */
                    233:                        p_priority = $3 - (u_int32_t) p_priority_offset;
                    234: 
                    235:                        if (init_x_policy())
                    236:                                return -1;
                    237:                }
                    238:                rules
                    239:        |       DIR PRIORITY PRIO_BASE HYPHEN PRIO_OFFSET ACTION
                    240:                {
                    241:                        p_dir = $1;
                    242:                        p_type = $6;
                    243: 
                    244:                        errno = 0;
                    245:                        p_priority_offset = atol($5.buf);
                    246: 
                    247:                        if (errno != 0 || p_priority_offset > PRIORITY_OFFSET_POSITIVE_MAX)
                    248:                        {
                    249:                                __ipsec_errcode = EIPSEC_INVAL_PRIORITY_BASE_OFFSET;
                    250:                                return -1;
                    251:                        }
                    252: 
                    253:                        /* subtracting value means lower priority, therefore higher
                    254:                           actual value so that is closer to the end of the list */
                    255:                        p_priority = $3 + (u_int32_t) p_priority_offset;
                    256: 
                    257:                        if (init_x_policy())
                    258:                                return -1;
                    259:                }
                    260:                rules
                    261:        |       DIR
                    262:                {
                    263:                        p_dir = $1;
                    264:                        p_type = 0;     /* ignored it by kernel */
                    265: 
                    266:                        p_priority = 0;
                    267: 
                    268:                        if (init_x_policy())
                    269:                                return -1;
                    270:                }
                    271:        ;
                    272: 
                    273: rules
                    274:        :       /*NOTHING*/
                    275:        |       rules rule {
                    276:                        if (rule_check() < 0)
                    277:                                return -1;
                    278: 
                    279:                        if (set_x_request(p_src, p_dst) < 0)
                    280:                                return -1;
                    281: 
                    282:                        policy_parse_request_init();
                    283:                }
                    284:        ;
                    285: 
                    286: rule
                    287:        :       protocol SLASH mode SLASH addresses SLASH level
                    288:        |       protocol SLASH mode SLASH addresses SLASH
                    289:        |       protocol SLASH mode SLASH addresses
                    290:        |       protocol SLASH mode SLASH
                    291:        |       protocol SLASH mode SLASH SLASH level
                    292:        |       protocol SLASH mode
                    293:        |       protocol SLASH {
                    294:                        __ipsec_errcode = EIPSEC_FEW_ARGUMENTS;
                    295:                        return -1;
                    296:                }
                    297:        |       protocol {
                    298:                        __ipsec_errcode = EIPSEC_FEW_ARGUMENTS;
                    299:                        return -1;
                    300:                }
                    301:        ;
                    302: 
                    303: protocol
                    304:        :       PROTOCOL { p_protocol = $1; }
                    305:        ;
                    306: 
                    307: mode
                    308:        :       MODE { p_mode = $1; }
                    309:        ;
                    310: 
                    311: level
                    312:        :       LEVEL {
                    313:                        p_level = $1;
                    314:                        p_reqid = 0;
                    315:                }
                    316:        |       LEVEL_SPECIFY {
                    317:                        p_level = IPSEC_LEVEL_UNIQUE;
                    318:                        p_reqid = atol($1.buf); /* atol() is good. */
                    319:                }
                    320:        ;
                    321: 
                    322: addresses
                    323:        :       IPADDRESS {
                    324:                        p_src = parse_sockaddr(&$1, NULL);
                    325:                        if (p_src == NULL)
                    326:                                return -1;
                    327:                }
                    328:                HYPHEN
                    329:                IPADDRESS {
                    330:                        p_dst = parse_sockaddr(&$4, NULL);
                    331:                        if (p_dst == NULL)
                    332:                                return -1;
                    333:                }
                    334:        |       IPADDRESS PORT {
                    335:                        p_src = parse_sockaddr(&$1, &$2);
                    336:                        if (p_src == NULL)
                    337:                                return -1;
                    338:                }
                    339:                HYPHEN
                    340:                IPADDRESS PORT {
                    341:                        p_dst = parse_sockaddr(&$5, &$6);
                    342:                        if (p_dst == NULL)
                    343:                                return -1;
                    344:                }
                    345:        |       ME HYPHEN ANY {
                    346:                        if (p_dir != IPSEC_DIR_OUTBOUND) {
                    347:                                __ipsec_errcode = EIPSEC_INVAL_DIR;
                    348:                                return -1;
                    349:                        }
                    350:                }
                    351:        |       ANY HYPHEN ME {
                    352:                        if (p_dir != IPSEC_DIR_INBOUND) {
                    353:                                __ipsec_errcode = EIPSEC_INVAL_DIR;
                    354:                                return -1;
                    355:                        }
                    356:                }
                    357:                /*
                    358:        |       ME HYPHEN ME
                    359:                */
                    360:        ;
                    361: 
                    362: %%
                    363: 
                    364: void
                    365: yyerror(msg)
                    366:        char *msg;
                    367: {
                    368:        fprintf(stderr, "libipsec: %s while parsing \"%s\"\n",
                    369:                msg, __libipsectext);
                    370: 
                    371:        return;
                    372: }
                    373: 
                    374: static struct sockaddr *
                    375: parse_sockaddr(addrbuf, portbuf)
                    376:        struct _val *addrbuf;
                    377:        struct _val *portbuf;
                    378: {
                    379:        struct addrinfo hints, *res;
                    380:        char *addr;
                    381:        char *serv = NULL;
                    382:        int error;
                    383:        struct sockaddr *newaddr = NULL;
                    384: 
                    385:        if ((addr = malloc(addrbuf->len + 1)) == NULL) {
                    386:                yyerror("malloc failed");
                    387:                __ipsec_set_strerror(strerror(errno));
                    388:                return NULL;
                    389:        }
                    390: 
                    391:        if (portbuf && ((serv = malloc(portbuf->len + 1)) == NULL)) {
                    392:                free(addr);
                    393:                yyerror("malloc failed");
                    394:                __ipsec_set_strerror(strerror(errno));
                    395:                return NULL;
                    396:        }
                    397: 
                    398:        strncpy(addr, addrbuf->buf, addrbuf->len);
                    399:        addr[addrbuf->len] = '\0';
                    400: 
                    401:        if (portbuf) {
                    402:                strncpy(serv, portbuf->buf, portbuf->len);
                    403:                serv[portbuf->len] = '\0';
                    404:        }
                    405: 
                    406:        memset(&hints, 0, sizeof(hints));
                    407:        hints.ai_family = PF_UNSPEC;
                    408:        hints.ai_flags = AI_NUMERICHOST;
                    409:        hints.ai_socktype = SOCK_DGRAM;
                    410:        error = getaddrinfo(addr, serv, &hints, &res);
                    411:        free(addr);
                    412:        if (serv != NULL)
                    413:                free(serv);
                    414:        if (error != 0) {
                    415:                yyerror("invalid IP address");
                    416:                __ipsec_set_strerror(gai_strerror(error));
                    417:                return NULL;
                    418:        }
                    419: 
                    420:        if (res->ai_addr == NULL) {
                    421:                yyerror("invalid IP address");
                    422:                __ipsec_set_strerror(gai_strerror(error));
                    423:                return NULL;
                    424:        }
                    425: 
                    426:        newaddr = malloc(res->ai_addrlen);
                    427:        if (newaddr == NULL) {
                    428:                __ipsec_errcode = EIPSEC_NO_BUFS;
                    429:                freeaddrinfo(res);
                    430:                return NULL;
                    431:        }
                    432:        memcpy(newaddr, res->ai_addr, res->ai_addrlen);
                    433: 
                    434:        freeaddrinfo(res);
                    435: 
                    436:        __ipsec_errcode = EIPSEC_NO_ERROR;
                    437:        return newaddr;
                    438: }
                    439: 
                    440: static int
                    441: rule_check()
                    442: {
                    443:        if (p_type == IPSEC_POLICY_IPSEC) {
                    444:                if (p_protocol == IPPROTO_IP) {
                    445:                        __ipsec_errcode = EIPSEC_NO_PROTO;
                    446:                        return -1;
                    447:                }
                    448: 
                    449:                if (p_mode != IPSEC_MODE_TRANSPORT
                    450:                 && p_mode != IPSEC_MODE_TUNNEL) {
                    451:                        __ipsec_errcode = EIPSEC_INVAL_MODE;
                    452:                        return -1;
                    453:                }
                    454: 
                    455:                if (p_src == NULL && p_dst == NULL) {
                    456:                         if (p_mode != IPSEC_MODE_TRANSPORT) {
                    457:                                __ipsec_errcode = EIPSEC_INVAL_ADDRESS;
                    458:                                return -1;
                    459:                        }
                    460:                }
                    461:                else if (p_src->sa_family != p_dst->sa_family) {
                    462:                        __ipsec_errcode = EIPSEC_FAMILY_MISMATCH;
                    463:                        return -1;
                    464:                }
                    465:        }
                    466: 
                    467:        __ipsec_errcode = EIPSEC_NO_ERROR;
                    468:        return 0;
                    469: }
                    470: 
                    471: static int
                    472: init_x_policy()
                    473: {
                    474:        struct sadb_x_policy *p;
                    475: 
                    476:        if (pbuf) {
                    477:                free(pbuf);
                    478:                tlen = 0;
                    479:        }
                    480:        pbuf = malloc(sizeof(struct sadb_x_policy));
                    481:        if (pbuf == NULL) {
                    482:                __ipsec_errcode = EIPSEC_NO_BUFS;
                    483:                return -1;
                    484:        }
                    485:        tlen = sizeof(struct sadb_x_policy);
                    486: 
                    487:        memset(pbuf, 0, tlen);
                    488:        p = (struct sadb_x_policy *)pbuf;
                    489:        p->sadb_x_policy_len = 0;       /* must update later */
                    490:        p->sadb_x_policy_exttype = SADB_X_EXT_POLICY;
                    491:        p->sadb_x_policy_type = p_type;
                    492:        p->sadb_x_policy_dir = p_dir;
                    493:        p->sadb_x_policy_id = 0;
                    494: #ifdef HAVE_PFKEY_POLICY_PRIORITY
                    495:        p->sadb_x_policy_priority = p_priority;
                    496: #else
                    497:     /* fail if given a priority and libipsec was not compiled with 
                    498:           priority support */
                    499:        if (p_priority != 0)
                    500:        {
                    501:                __ipsec_errcode = EIPSEC_PRIORITY_NOT_COMPILED;
                    502:                return -1;
                    503:        }
                    504: #endif
                    505: 
                    506:        offset = tlen;
                    507: 
                    508:        __ipsec_errcode = EIPSEC_NO_ERROR;
                    509:        return 0;
                    510: }
                    511: 
                    512: static int
                    513: set_x_request(src, dst)
                    514:        struct sockaddr *src, *dst;
                    515: {
                    516:        struct sadb_x_ipsecrequest *p;
                    517:        int reqlen;
                    518:        u_int8_t *n;
                    519: 
                    520:        reqlen = sizeof(*p)
                    521:                + (src ? sysdep_sa_len(src) : 0)
                    522:                + (dst ? sysdep_sa_len(dst) : 0);
                    523:        tlen += reqlen;         /* increment to total length */
                    524: 
                    525:        n = realloc(pbuf, tlen);
                    526:        if (n == NULL) {
                    527:                __ipsec_errcode = EIPSEC_NO_BUFS;
                    528:                return -1;
                    529:        }
                    530:        pbuf = n;
                    531: 
                    532:        p = (struct sadb_x_ipsecrequest *)&pbuf[offset];
                    533:        p->sadb_x_ipsecrequest_len = reqlen;
                    534:        p->sadb_x_ipsecrequest_proto = p_protocol;
                    535:        p->sadb_x_ipsecrequest_mode = p_mode;
                    536:        p->sadb_x_ipsecrequest_level = p_level;
                    537:        p->sadb_x_ipsecrequest_reqid = p_reqid;
                    538:        offset += sizeof(*p);
                    539: 
                    540:        if (set_sockaddr(src) || set_sockaddr(dst))
                    541:                return -1;
                    542: 
                    543:        __ipsec_errcode = EIPSEC_NO_ERROR;
                    544:        return 0;
                    545: }
                    546: 
                    547: static int
                    548: set_sockaddr(addr)
                    549:        struct sockaddr *addr;
                    550: {
                    551:        if (addr == NULL) {
                    552:                __ipsec_errcode = EIPSEC_NO_ERROR;
                    553:                return 0;
                    554:        }
                    555: 
                    556:        /* tlen has already incremented */
                    557: 
                    558:        memcpy(&pbuf[offset], addr, sysdep_sa_len(addr));
                    559: 
                    560:        offset += sysdep_sa_len(addr);
                    561: 
                    562:        __ipsec_errcode = EIPSEC_NO_ERROR;
                    563:        return 0;
                    564: }
                    565: 
                    566: static void
                    567: policy_parse_request_init()
                    568: {
                    569:        p_protocol = IPPROTO_IP;
                    570:        p_mode = IPSEC_MODE_ANY;
                    571:        p_level = IPSEC_LEVEL_DEFAULT;
                    572:        p_reqid = 0;
                    573:        if (p_src != NULL) {
                    574:                free(p_src);
                    575:                p_src = NULL;
                    576:        }
                    577:        if (p_dst != NULL) {
                    578:                free(p_dst);
                    579:                p_dst = NULL;
                    580:        }
                    581: 
                    582:        return;
                    583: }
                    584: 
                    585: static void *
                    586: policy_parse(msg, msglen)
                    587:        const char *msg;
                    588:        int msglen;
                    589: {
                    590:        int error;
                    591: 
                    592:        pbuf = NULL;
                    593:        tlen = 0;
                    594: 
                    595:        /* initialize */
                    596:        p_dir = IPSEC_DIR_INVALID;
                    597:        p_type = IPSEC_POLICY_DISCARD;
                    598:        policy_parse_request_init();
                    599:        __policy__strbuffer__init__(msg);
                    600: 
                    601:        error = yyparse();      /* it must be set errcode. */
                    602:        __policy__strbuffer__free__();
                    603: 
                    604:        if (error) {
                    605:                if (pbuf != NULL)
                    606:                        free(pbuf);
                    607:                return NULL;
                    608:        }
                    609: 
                    610:        /* update total length */
                    611:        ((struct sadb_x_policy *)pbuf)->sadb_x_policy_len = PFKEY_UNIT64(tlen);
                    612: 
                    613:        __ipsec_errcode = EIPSEC_NO_ERROR;
                    614: 
                    615:        return pbuf;
                    616: }
                    617: 
                    618: ipsec_policy_t
                    619: ipsec_set_policy(msg, msglen)
                    620:        __ipsec_const char *msg;
                    621:        int msglen;
                    622: {
                    623:        caddr_t policy;
                    624: 
                    625:        policy = policy_parse(msg, msglen);
                    626:        if (policy == NULL) {
                    627:                if (__ipsec_errcode == EIPSEC_NO_ERROR)
                    628:                        __ipsec_errcode = EIPSEC_INVAL_ARGUMENT;
                    629:                return NULL;
                    630:        }
                    631: 
                    632:        __ipsec_errcode = EIPSEC_NO_ERROR;
                    633:        return policy;
                    634: }

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>