Return to README CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / istgt

Annotation of embedaddon/istgt/README, revision 1.1.1.3

1.1.1.2   misho       1: The iSCSI target for Debian/NetBSD/FreeBSD
1.1       misho       2: 
                      3: This software (istgt) is the implementation of iSCSI target
                      4: (refer to RFC3720 about iSCSI) for FreeBSD 7.1 or later.
                      5: It includes iSCSI protocol processor and SPC-3 (SCSI Primary
                      6: Commands - 3) based logical unit emulation.
                      7: You can easily create over 2TB storage for iSCSI target.
                      8: If necessary, you can configure to use multipath failover or
                      9: MCS failover.
                     10: 
                     11: If you want use the command queuing, change QueueDepth key of
                     12: the configuration. Because default is comment out, you only
                     13: remove # from this line to make the parameter take effect.
                     14: The command queuing is not yet stable. If you have any problem,
                     15: comment out or specify 0 to disable it. The small QueueDepth
                     16: may cause a problem. I recommend you to specify more than 32.
                     17: 
                     18: You can use a file or any raw device as the backing store.
                     19: Microsoft Windows Server 2008 or Microsoft iSCSI initiator 2.08
                     20: or later is recommended.
                     21: Diskless iSCSI boot is tested with Intel PRO/1000 PT Server
                     22: Adapter and Windows Server 2003/2008/2008R2/Windows7 RC.
                     23: iSCSI install/boot is tested with gPXE 1.0.0 and WS2K8/2K8R2/W7.
                     24: Intel Gigabit CT Desktop Adapter is tested with WS 2K8R2/W7.
                     25: 
                     26: This software is under development and less document.
                     27: The format of the configuration file may frequently be changed.
                     28: Please use it carefully.
                     29: It is made based on the concept of my own MCS extra patch
                     30: (release 20090125) for iscsi-target (netbsd-iscsi-20080207).
                     31: 
                     32: If you want to run FreeBSD in Hyper-V environment,
                     33: please use my small kernel patch of reboot issue which can be
                     34: downloaded below.
                     35: 
                     36: The latest version is available at:
                     37: http://shell.peach.ne.jp/aoyama/
                     38: 
                     39: For FreeBSD initiator, please check here:
                     40: ftp://ftp.cs.huji.ac.il/users/danny/freebsd/
                     41: 
                     42: Using path-through tape drive from Microsoft iSCSI Initiator:
                     43: open registry of initiator by regedit.exe.
                     44: change the value of MaxTransferLength to 0x10000 (65536).
                     45: reboot Windows.
                     46: (0000 is an instance number. It might be a different value.)
                     47: 
                     48: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\
                     49: {4D36E97B-E325-11CE-BFC1-08002BE10318}\0000\Parameters\
                     50: MaxTransferLength
                     51: 
                     52: Timeout of Microsoft iSCSI Initiator:
                     53: If you want fast recovery from failure, try to decrease the value in
                     54: above registry:
                     55: LinkDownTime
                     56: TCPConnectTime
                     57: TCPDisconnectTime
                     58: DelayBetweenReconnect
                     59: 
                     60: If you want to keep failed command, try to increase:
                     61: MaxRequestHoldTime
                     62: SrbTimeoutDelta
                     63: 
                     64: 
                     65: External Libs:
                     66:  o OpenSSL (shipped with FreeBSD)
                     67:  o CAM (shipped with FreeBSD)
1.1.1.2   misho      68:  o VirtualBox 4.x DSO (if use --with-vbox configure option)
1.1       misho      69: 
                     70: Tested Initiators:
                     71:  o Microsoft Windows Server 2008 (builtin)
                     72:  o Microsoft Windows Server 2008 R2 (builtin)
                     73:  o Microsoft Windows 7 Ultimate x64 (builtin)
1.1.1.2   misho      74:  o Microsoft Windows 8 Preview x64 (builtin)
1.1       misho      75:  o Microsoft iSCSI Initiator 2.08 on WS2003
                     76:  o Intel iSCSI Remote Boot 2.1.22
                     77:  o Intel iSCSI Remote Boot 2.3.81
                     78:  o Intel iSCSI Remote Boot 2.5.12 (CT Desktop Adapter)
                     79:  o Intel iSCSI Remote Boot 2.7.44 (ET Dual Port Server Adapter)
                     80:  o Sun VirtualBOX 2.1.2 (builtin)
                     81:  o Sun VirtualBOX 3.0.12 (builtin)
                     82:  o Sun VirtualBOX 3.1.2 (builtin)
                     83:  o VMware ESXi 3.5 Update 3 (builtin)
                     84:  o VMware ESXi 4.0 (builtin)
                     85:  o VMware ESXi 4.1 Update 1 (builtin)
                     86:  o VMware ESXi 5.0 (builtin)
1.1.1.3 ! misho      87:  o VMware ESXi 5.1 (builtin)
1.1       misho      88:  o Xen Server 5.0 Update 3 (builtin)
                     89:  o Xen Server 5.5 (builtin)
                     90:  o FreeBSD 7.1 + iscsi 2.1.3
                     91:  o FreeBSD 7.2 + iscsi 2.2.3
                     92:  o FreeBSD 7.3 + iscsi 2.2.4
                     93:  o FreeBSD 8.2 + isboot 0.2.3
1.1.1.3 ! misho      94:  o FreeBSD 9.1 + isboot 0.2.6
1.1       misho      95:  o CentOS 5.2 + Open-iSCSI (package)
                     96:  o Ubuntu 9.10 + Open-iSCSI (package)
                     97:  o gPXE 1.0.0 + VirtualBox 3.1.2 on FreeNAS 0.7.1
1.1.1.3 ! misho      98:  o iPXE 1.0.0 + isboot 0.2.5 + FreeBSD 9.1
1.1       misho      99:  o FreeNAS 0.7.1 (FreeBSD 7.2/7.3 + iscsi 2.2.4)
                    100:  o FreeNAS 0.7.2 (FreeBSD 7.3 + iscsi 2.2.4)
1.1.1.2   misho     101:  o FreeNAS 0.7.5 (FreeBSD 9.0 + iscsi 2.3.1.0)
1.1.1.3 ! misho     102:  o NAS4Free 9.1.0.1 (FreeBSD 9.1 + iscsi 2.3.1.0)
1.1       misho     103: 
                    104: Features:
                    105:  o MCS/MPIO for failover (up to 255 concurrent sessions)
                    106:  o Multipath I/O (only support Microsoft MPIO/VMware ESXi)
                    107:  o SPC-3 Persistent Reservation for cluster nodes
                    108:  o 64bit LBA for over 2TB
                    109:  o Header/Data digest by CRC32C
                    110:  o CHAP w/Mutual authentication
                    111:  o Multiple LUNs and ACLs for portals
                    112:  o IPv6/IPv4 dual support
                    113:  (experimental features)
1.1.1.2   misho     114:  o Command Queuing (up to 255 depth, 32 by default)
1.1       misho     115:  o iSCSI boot with Intel PRO/1000 Server Adapters
                    116:  o virtual DVD-ROM and virtual tape drive (DLT emulator)
                    117:  o pass-through device (only support DA/SA/CD/CH type)
                    118: 
                    119: Current Limitations:
1.1.1.2   misho     120:  o can't create empty VirtualBox VirtualDisk.
                    121:  o The parameters other than PG, IG, and LU are not reloaded by SIGHUP.
                    122:  o PG and IG mapped to LU can't be deleted by SIGHUP.
                    123:  o LU connected by the initiator can't be reloaded by SIGHUP.
                    124:  o If you delete an active LU, all connections of the LU are closed by SIGHUP.
                    125:  o Updating IG is not affected until the next login.
1.1       misho     126:  o logical unit is sharing with exclusive lock
                    127:  o exclusive port w/asynchronous operation
                    128:  o command queuing is incomplete for multiple initiators
                    129:  o LUN1 and more are shared information of LUN0 (e.g. UnitInquiry)
                    130:  o APTPL (Activate Persist Through Power Loss) is not supported
                    131:  o TPGS is incomplete for multipath failover (disabled by default)
                    132:  o path-through SA variable length must not exceed 65536 (CAM limit)
1.1.1.2   misho     133:  o maximum LUN is 63
1.1       misho     134:  o maximum PortalGroup are 1024
                    135:  o maximum InitiatorGroup, LogicalUnit are 4096
                    136:  o maximum mapping per target is 256
                    137:  o maximum concurrent session identifier per target is 255
                    138:  o maximum persistent reservation keys per target is 256
                    139:  (most case of limitation is due to memory allocation and finding
                    140:   method by linear search)
                    141: 
                    142: Special Thanks to:
                    143: Isao Takatani (bug report and idea suggestion)
                    144: Toshiya Shimpo of Meikohsha Information System Co.,Ltd
                    145: Yoshio Takii of Meikohsha Information System Co.,Ltd
                    146: 
                    147: Author:
                    148: Daisuke Aoyama <aoyama@peach.ne.jp>