Return to QUICKSTART CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / istgt / doc

Annotation of embedaddon/istgt/doc/QUICKSTART, revision 1.1

1.1     ! misho       1: Quick Start
        !             2: -----------
        !             3: 
        !             4: Copy sample configuration files after installation.
        !             5: 
        !             6: # cd /usr/local/etc/istgt
        !             7: # cp auth.conf.sample auth.conf
        !             8: # cp istgt.conf.sample istgt.conf
        !             9: # cp istgtcontrol.conf.sample istgtcontrol.conf
        !            10: 
        !            11: Edit istgt.conf.
        !            12: 3 sections below at least need modification against your own copy of
        !            13: istgt.conf.sample.
        !            14: 
        !            15: [PortalGroup1] IP address
        !            16: [InitiatorGroup1] Initiator name and netmask
        !            17: [LogicalUnit1] LUN0 allocated file name and size
        !            18: 
        !            19: [PortalGroup1]
        !            20:   Portal DA1 192.168.2.36:3260
        !            21: 
        !            22: Replace 192.168.2.36 with your server IP.
        !            23: Because 3260 is standard iSCSI port, 3260 does not need modification.
        !            24: 
        !            25: [InitiatorGroup1]
        !            26:   InitiatorName "iqn.1991-05.com.microsoft:saturn"
        !            27:   Netmask 192.168.2.0/24
        !            28: 
        !            29: Replace "iqn.1991-05.com.microsoft:saturn" with your allowed initiator
        !            30: name and 192.168.2.0/24 with your allowed IP or CIDR.
        !            31: If you need any initiator names or IPs, use special word ALL instead.
        !            32: 
        !            33: [LogicalUnit1]
        !            34:   LUN0 Storage /tank/iscsi/istgt-disk1 10GB
        !            35: 
        !            36: Replace /tank/iscsi/istgt-disk1 with your correct path and 10GB with
        !            37: the size you want.
        !            38: You can specify the size also with MB or TB.
        !            39: When the device file (/dev/ad1, /dev/zvol/tank/vol, etc.) is specified,
        !            40: Auto can be specified for the size.
        !            41: 
        !            42: After finishing to edit istgt.conf, start daemon by the script.
        !            43: 
        !            44: # /usr/local/etc/rc.d/istgt forcestart
        !            45: 
        !            46: Check messages on terminal and syslog (usually /var/log/messages).
        !            47: An error message may only appear at syslog.
        !            48: 
        !            49: Add istgt_enable="YES" to /etc/rc.conf.
        !            50: 
        !            51: You have done.