Return to QUICKSTART CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / istgt / doc

Annotation of embedaddon/istgt/doc/QUICKSTART, revision 1.1.1.1

1.1       misho       1: Quick Start
                      2: -----------
                      3: 
                      4: Copy sample configuration files after installation.
                      5: 
                      6: # cd /usr/local/etc/istgt
                      7: # cp auth.conf.sample auth.conf
                      8: # cp istgt.conf.sample istgt.conf
                      9: # cp istgtcontrol.conf.sample istgtcontrol.conf
                     10: 
                     11: Edit istgt.conf.
                     12: 3 sections below at least need modification against your own copy of
                     13: istgt.conf.sample.
                     14: 
                     15: [PortalGroup1] IP address
                     16: [InitiatorGroup1] Initiator name and netmask
                     17: [LogicalUnit1] LUN0 allocated file name and size
                     18: 
                     19: [PortalGroup1]
                     20:   Portal DA1 192.168.2.36:3260
                     21: 
                     22: Replace 192.168.2.36 with your server IP.
                     23: Because 3260 is standard iSCSI port, 3260 does not need modification.
                     24: 
                     25: [InitiatorGroup1]
                     26:   InitiatorName "iqn.1991-05.com.microsoft:saturn"
                     27:   Netmask 192.168.2.0/24
                     28: 
                     29: Replace "iqn.1991-05.com.microsoft:saturn" with your allowed initiator
                     30: name and 192.168.2.0/24 with your allowed IP or CIDR.
                     31: If you need any initiator names or IPs, use special word ALL instead.
                     32: 
                     33: [LogicalUnit1]
                     34:   LUN0 Storage /tank/iscsi/istgt-disk1 10GB
                     35: 
                     36: Replace /tank/iscsi/istgt-disk1 with your correct path and 10GB with
                     37: the size you want.
                     38: You can specify the size also with MB or TB.
                     39: When the device file (/dev/ad1, /dev/zvol/tank/vol, etc.) is specified,
                     40: Auto can be specified for the size.
                     41: 
                     42: After finishing to edit istgt.conf, start daemon by the script.
                     43: 
                     44: # /usr/local/etc/rc.d/istgt forcestart
                     45: 
                     46: Check messages on terminal and syslog (usually /var/log/messages).
                     47: An error message may only appear at syslog.
                     48: 
                     49: Add istgt_enable="YES" to /etc/rc.conf.
                     50: 
                     51: You have done.