Return to QUICKSTART CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / istgt / doc

istgt

    1: Quick Start
    2: -----------
    3: 
    4: Copy sample configuration files after installation.
    5: 
    6: # cd /usr/local/etc/istgt
    7: # cp auth.conf.sample auth.conf
    8: # cp istgt.conf.sample istgt.conf
    9: # cp istgtcontrol.conf.sample istgtcontrol.conf
   10: 
   11: Edit istgt.conf.
   12: 3 sections below at least need modification against your own copy of
   13: istgt.conf.sample.
   14: 
   15: [PortalGroup1] IP address
   16: [InitiatorGroup1] Initiator name and netmask
   17: [LogicalUnit1] LUN0 allocated file name and size
   18: 
   19: [PortalGroup1]
   20:   Portal DA1 192.168.2.36:3260
   21: 
   22: Replace 192.168.2.36 with your server IP.
   23: Because 3260 is standard iSCSI port, 3260 does not need modification.
   24: 
   25: [InitiatorGroup1]
   26:   InitiatorName "iqn.1991-05.com.microsoft:saturn"
   27:   Netmask 192.168.2.0/24
   28: 
   29: Replace "iqn.1991-05.com.microsoft:saturn" with your allowed initiator
   30: name and 192.168.2.0/24 with your allowed IP or CIDR.
   31: If you need any initiator names or IPs, use special word ALL instead.
   32: 
   33: [LogicalUnit1]
   34:   LUN0 Storage /tank/iscsi/istgt-disk1 10GB
   35: 
   36: Replace /tank/iscsi/istgt-disk1 with your correct path and 10GB with
   37: the size you want.
   38: You can specify the size also with MB or TB.
   39: When the device file (/dev/ad1, /dev/zvol/tank/vol, etc.) is specified,
   40: Auto can be specified for the size.
   41: 
   42: After finishing to edit istgt.conf, start daemon by the script.
   43: 
   44: # /usr/local/etc/rc.d/istgt forcestart
   45: 
   46: Check messages on terminal and syslog (usually /var/log/messages).
   47: An error message may only appear at syslog.
   48: 
   49: Add istgt_enable="YES" to /etc/rc.conf.
   50: 
   51: You have done.