Annotation of embedaddon/libevent/ltmain.sh, revision 1.1
1.1 ! misho 1: # Generated from ltmain.m4sh.
! 2:
! 3: # ltmain.sh (GNU libtool) 2.2.6b
! 4: # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
! 5:
! 6: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
! 7: # This is free software; see the source for copying conditions. There is NO
! 8: # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
! 9:
! 10: # GNU Libtool is free software; you can redistribute it and/or modify
! 11: # it under the terms of the GNU General Public License as published by
! 12: # the Free Software Foundation; either version 2 of the License, or
! 13: # (at your option) any later version.
! 14: #
! 15: # As a special exception to the GNU General Public License,
! 16: # if you distribute this file as part of a program or library that
! 17: # is built using GNU Libtool, you may include this file under the
! 18: # same distribution terms that you use for the rest of that program.
! 19: #
! 20: # GNU Libtool is distributed in the hope that it will be useful, but
! 21: # WITHOUT ANY WARRANTY; without even the implied warranty of
! 22: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! 23: # General Public License for more details.
! 24: #
! 25: # You should have received a copy of the GNU General Public License
! 26: # along with GNU Libtool; see the file COPYING. If not, a copy
! 27: # can be downloaded from http://www.gnu.org/licenses/gpl.html,
! 28: # or obtained by writing to the Free Software Foundation, Inc.,
! 29: # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
! 30:
! 31: # Usage: $progname [OPTION]... [MODE-ARG]...
! 32: #
! 33: # Provide generalized library-building support services.
! 34: #
! 35: # --config show all configuration variables
! 36: # --debug enable verbose shell tracing
! 37: # -n, --dry-run display commands without modifying any files
! 38: # --features display basic configuration information and exit
! 39: # --mode=MODE use operation mode MODE
! 40: # --preserve-dup-deps don't remove duplicate dependency libraries
! 41: # --quiet, --silent don't print informational messages
! 42: # --tag=TAG use configuration variables from tag TAG
! 43: # -v, --verbose print informational messages (default)
! 44: # --version print version information
! 45: # -h, --help print short or long help message
! 46: #
! 47: # MODE must be one of the following:
! 48: #
! 49: # clean remove files from the build directory
! 50: # compile compile a source file into a libtool object
! 51: # execute automatically set library path, then run a program
! 52: # finish complete the installation of libtool libraries
! 53: # install install libraries or executables
! 54: # link create a library or an executable
! 55: # uninstall remove libraries from an installed directory
! 56: #
! 57: # MODE-ARGS vary depending on the MODE.
! 58: # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
! 59: #
! 60: # When reporting a bug, please describe a test case to reproduce it and
! 61: # include the following information:
! 62: #
! 63: # host-triplet: $host
! 64: # shell: $SHELL
! 65: # compiler: $LTCC
! 66: # compiler flags: $LTCFLAGS
! 67: # linker: $LD (gnu? $with_gnu_ld)
! 68: # $progname: (GNU libtool) 2.2.6b
! 69: # automake: $automake_version
! 70: # autoconf: $autoconf_version
! 71: #
! 72: # Report bugs to <bug-libtool@gnu.org>.
! 73:
! 74: PROGRAM=ltmain.sh
! 75: PACKAGE=libtool
! 76: VERSION=2.2.6b
! 77: TIMESTAMP=""
! 78: package_revision=1.3017
! 79:
! 80: # Be Bourne compatible
! 81: if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
! 82: emulate sh
! 83: NULLCMD=:
! 84: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
! 85: # is contrary to our usage. Disable this feature.
! 86: alias -g '${1+"$@"}'='"$@"'
! 87: setopt NO_GLOB_SUBST
! 88: else
! 89: case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
! 90: fi
! 91: BIN_SH=xpg4; export BIN_SH # for Tru64
! 92: DUALCASE=1; export DUALCASE # for MKS sh
! 93:
! 94: # NLS nuisances: We save the old values to restore during execute mode.
! 95: # Only set LANG and LC_ALL to C if already set.
! 96: # These must not be set unconditionally because not all systems understand
! 97: # e.g. LANG=C (notably SCO).
! 98: lt_user_locale=
! 99: lt_safe_locale=
! 100: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
! 101: do
! 102: eval "if test \"\${$lt_var+set}\" = set; then
! 103: save_$lt_var=\$$lt_var
! 104: $lt_var=C
! 105: export $lt_var
! 106: lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
! 107: lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
! 108: fi"
! 109: done
! 110:
! 111: $lt_unset CDPATH
! 112:
! 113:
! 114:
! 115:
! 116:
! 117: : ${CP="cp -f"}
! 118: : ${ECHO="echo"}
! 119: : ${EGREP="/bin/grep -E"}
! 120: : ${FGREP="/bin/grep -F"}
! 121: : ${GREP="/bin/grep"}
! 122: : ${LN_S="ln -s"}
! 123: : ${MAKE="make"}
! 124: : ${MKDIR="mkdir"}
! 125: : ${MV="mv -f"}
! 126: : ${RM="rm -f"}
! 127: : ${SED="/bin/sed"}
! 128: : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
! 129: : ${Xsed="$SED -e 1s/^X//"}
! 130:
! 131: # Global variables:
! 132: EXIT_SUCCESS=0
! 133: EXIT_FAILURE=1
! 134: EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
! 135: EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
! 136:
! 137: exit_status=$EXIT_SUCCESS
! 138:
! 139: # Make sure IFS has a sensible default
! 140: lt_nl='
! 141: '
! 142: IFS=" $lt_nl"
! 143:
! 144: dirname="s,/[^/]*$,,"
! 145: basename="s,^.*/,,"
! 146:
! 147: # func_dirname_and_basename file append nondir_replacement
! 148: # perform func_basename and func_dirname in a single function
! 149: # call:
! 150: # dirname: Compute the dirname of FILE. If nonempty,
! 151: # add APPEND to the result, otherwise set result
! 152: # to NONDIR_REPLACEMENT.
! 153: # value returned in "$func_dirname_result"
! 154: # basename: Compute filename of FILE.
! 155: # value retuned in "$func_basename_result"
! 156: # Implementation must be kept synchronized with func_dirname
! 157: # and func_basename. For efficiency, we do not delegate to
! 158: # those functions but instead duplicate the functionality here.
! 159: func_dirname_and_basename ()
! 160: {
! 161: # Extract subdirectory from the argument.
! 162: func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
! 163: if test "X$func_dirname_result" = "X${1}"; then
! 164: func_dirname_result="${3}"
! 165: else
! 166: func_dirname_result="$func_dirname_result${2}"
! 167: fi
! 168: func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
! 169: }
! 170:
! 171: # Generated shell functions inserted here.
! 172:
! 173: # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
! 174: # is ksh but when the shell is invoked as "sh" and the current value of
! 175: # the _XPG environment variable is not equal to 1 (one), the special
! 176: # positional parameter $0, within a function call, is the name of the
! 177: # function.
! 178: progpath="$0"
! 179:
! 180: # The name of this program:
! 181: # In the unlikely event $progname began with a '-', it would play havoc with
! 182: # func_echo (imagine progname=-n), so we prepend ./ in that case:
! 183: func_dirname_and_basename "$progpath"
! 184: progname=$func_basename_result
! 185: case $progname in
! 186: -*) progname=./$progname ;;
! 187: esac
! 188:
! 189: # Make sure we have an absolute path for reexecution:
! 190: case $progpath in
! 191: [\\/]*|[A-Za-z]:\\*) ;;
! 192: *[\\/]*)
! 193: progdir=$func_dirname_result
! 194: progdir=`cd "$progdir" && pwd`
! 195: progpath="$progdir/$progname"
! 196: ;;
! 197: *)
! 198: save_IFS="$IFS"
! 199: IFS=:
! 200: for progdir in $PATH; do
! 201: IFS="$save_IFS"
! 202: test -x "$progdir/$progname" && break
! 203: done
! 204: IFS="$save_IFS"
! 205: test -n "$progdir" || progdir=`pwd`
! 206: progpath="$progdir/$progname"
! 207: ;;
! 208: esac
! 209:
! 210: # Sed substitution that helps us do robust quoting. It backslashifies
! 211: # metacharacters that are still active within double-quoted strings.
! 212: Xsed="${SED}"' -e 1s/^X//'
! 213: sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
! 214:
! 215: # Same as above, but do not quote variable references.
! 216: double_quote_subst='s/\(["`\\]\)/\\\1/g'
! 217:
! 218: # Re-`\' parameter expansions in output of double_quote_subst that were
! 219: # `\'-ed in input to the same. If an odd number of `\' preceded a '$'
! 220: # in input to double_quote_subst, that '$' was protected from expansion.
! 221: # Since each input `\' is now two `\'s, look for any number of runs of
! 222: # four `\'s followed by two `\'s and then a '$'. `\' that '$'.
! 223: bs='\\'
! 224: bs2='\\\\'
! 225: bs4='\\\\\\\\'
! 226: dollar='\$'
! 227: sed_double_backslash="\
! 228: s/$bs4/&\\
! 229: /g
! 230: s/^$bs2$dollar/$bs&/
! 231: s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
! 232: s/\n//g"
! 233:
! 234: # Standard options:
! 235: opt_dry_run=false
! 236: opt_help=false
! 237: opt_quiet=false
! 238: opt_verbose=false
! 239: opt_warning=:
! 240:
! 241: # func_echo arg...
! 242: # Echo program name prefixed message, along with the current mode
! 243: # name if it has been set yet.
! 244: func_echo ()
! 245: {
! 246: $ECHO "$progname${mode+: }$mode: $*"
! 247: }
! 248:
! 249: # func_verbose arg...
! 250: # Echo program name prefixed message in verbose mode only.
! 251: func_verbose ()
! 252: {
! 253: $opt_verbose && func_echo ${1+"$@"}
! 254:
! 255: # A bug in bash halts the script if the last line of a function
! 256: # fails when set -e is in force, so we need another command to
! 257: # work around that:
! 258: :
! 259: }
! 260:
! 261: # func_error arg...
! 262: # Echo program name prefixed message to standard error.
! 263: func_error ()
! 264: {
! 265: $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
! 266: }
! 267:
! 268: # func_warning arg...
! 269: # Echo program name prefixed warning message to standard error.
! 270: func_warning ()
! 271: {
! 272: $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
! 273:
! 274: # bash bug again:
! 275: :
! 276: }
! 277:
! 278: # func_fatal_error arg...
! 279: # Echo program name prefixed message to standard error, and exit.
! 280: func_fatal_error ()
! 281: {
! 282: func_error ${1+"$@"}
! 283: exit $EXIT_FAILURE
! 284: }
! 285:
! 286: # func_fatal_help arg...
! 287: # Echo program name prefixed message to standard error, followed by
! 288: # a help hint, and exit.
! 289: func_fatal_help ()
! 290: {
! 291: func_error ${1+"$@"}
! 292: func_fatal_error "$help"
! 293: }
! 294: help="Try \`$progname --help' for more information." ## default
! 295:
! 296:
! 297: # func_grep expression filename
! 298: # Check whether EXPRESSION matches any line of FILENAME, without output.
! 299: func_grep ()
! 300: {
! 301: $GREP "$1" "$2" >/dev/null 2>&1
! 302: }
! 303:
! 304:
! 305: # func_mkdir_p directory-path
! 306: # Make sure the entire path to DIRECTORY-PATH is available.
! 307: func_mkdir_p ()
! 308: {
! 309: my_directory_path="$1"
! 310: my_dir_list=
! 311:
! 312: if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
! 313:
! 314: # Protect directory names starting with `-'
! 315: case $my_directory_path in
! 316: -*) my_directory_path="./$my_directory_path" ;;
! 317: esac
! 318:
! 319: # While some portion of DIR does not yet exist...
! 320: while test ! -d "$my_directory_path"; do
! 321: # ...make a list in topmost first order. Use a colon delimited
! 322: # list incase some portion of path contains whitespace.
! 323: my_dir_list="$my_directory_path:$my_dir_list"
! 324:
! 325: # If the last portion added has no slash in it, the list is done
! 326: case $my_directory_path in */*) ;; *) break ;; esac
! 327:
! 328: # ...otherwise throw away the child directory and loop
! 329: my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
! 330: done
! 331: my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
! 332:
! 333: save_mkdir_p_IFS="$IFS"; IFS=':'
! 334: for my_dir in $my_dir_list; do
! 335: IFS="$save_mkdir_p_IFS"
! 336: # mkdir can fail with a `File exist' error if two processes
! 337: # try to create one of the directories concurrently. Don't
! 338: # stop in that case!
! 339: $MKDIR "$my_dir" 2>/dev/null || :
! 340: done
! 341: IFS="$save_mkdir_p_IFS"
! 342:
! 343: # Bail out if we (or some other process) failed to create a directory.
! 344: test -d "$my_directory_path" || \
! 345: func_fatal_error "Failed to create \`$1'"
! 346: fi
! 347: }
! 348:
! 349:
! 350: # func_mktempdir [string]
! 351: # Make a temporary directory that won't clash with other running
! 352: # libtool processes, and avoids race conditions if possible. If
! 353: # given, STRING is the basename for that directory.
! 354: func_mktempdir ()
! 355: {
! 356: my_template="${TMPDIR-/tmp}/${1-$progname}"
! 357:
! 358: if test "$opt_dry_run" = ":"; then
! 359: # Return a directory name, but don't create it in dry-run mode
! 360: my_tmpdir="${my_template}-$$"
! 361: else
! 362:
! 363: # If mktemp works, use that first and foremost
! 364: my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
! 365:
! 366: if test ! -d "$my_tmpdir"; then
! 367: # Failing that, at least try and use $RANDOM to avoid a race
! 368: my_tmpdir="${my_template}-${RANDOM-0}$$"
! 369:
! 370: save_mktempdir_umask=`umask`
! 371: umask 0077
! 372: $MKDIR "$my_tmpdir"
! 373: umask $save_mktempdir_umask
! 374: fi
! 375:
! 376: # If we're not in dry-run mode, bomb out on failure
! 377: test -d "$my_tmpdir" || \
! 378: func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
! 379: fi
! 380:
! 381: $ECHO "X$my_tmpdir" | $Xsed
! 382: }
! 383:
! 384:
! 385: # func_quote_for_eval arg
! 386: # Aesthetically quote ARG to be evaled later.
! 387: # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
! 388: # is double-quoted, suitable for a subsequent eval, whereas
! 389: # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
! 390: # which are still active within double quotes backslashified.
! 391: func_quote_for_eval ()
! 392: {
! 393: case $1 in
! 394: *[\\\`\"\$]*)
! 395: func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
! 396: *)
! 397: func_quote_for_eval_unquoted_result="$1" ;;
! 398: esac
! 399:
! 400: case $func_quote_for_eval_unquoted_result in
! 401: # Double-quote args containing shell metacharacters to delay
! 402: # word splitting, command substitution and and variable
! 403: # expansion for a subsequent eval.
! 404: # Many Bourne shells cannot handle close brackets correctly
! 405: # in scan sets, so we specify it separately.
! 406: *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
! 407: func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
! 408: ;;
! 409: *)
! 410: func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
! 411: esac
! 412: }
! 413:
! 414:
! 415: # func_quote_for_expand arg
! 416: # Aesthetically quote ARG to be evaled later; same as above,
! 417: # but do not quote variable references.
! 418: func_quote_for_expand ()
! 419: {
! 420: case $1 in
! 421: *[\\\`\"]*)
! 422: my_arg=`$ECHO "X$1" | $Xsed \
! 423: -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
! 424: *)
! 425: my_arg="$1" ;;
! 426: esac
! 427:
! 428: case $my_arg in
! 429: # Double-quote args containing shell metacharacters to delay
! 430: # word splitting and command substitution for a subsequent eval.
! 431: # Many Bourne shells cannot handle close brackets correctly
! 432: # in scan sets, so we specify it separately.
! 433: *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
! 434: my_arg="\"$my_arg\""
! 435: ;;
! 436: esac
! 437:
! 438: func_quote_for_expand_result="$my_arg"
! 439: }
! 440:
! 441:
! 442: # func_show_eval cmd [fail_exp]
! 443: # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
! 444: # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
! 445: # is given, then evaluate it.
! 446: func_show_eval ()
! 447: {
! 448: my_cmd="$1"
! 449: my_fail_exp="${2-:}"
! 450:
! 451: ${opt_silent-false} || {
! 452: func_quote_for_expand "$my_cmd"
! 453: eval "func_echo $func_quote_for_expand_result"
! 454: }
! 455:
! 456: if ${opt_dry_run-false}; then :; else
! 457: eval "$my_cmd"
! 458: my_status=$?
! 459: if test "$my_status" -eq 0; then :; else
! 460: eval "(exit $my_status); $my_fail_exp"
! 461: fi
! 462: fi
! 463: }
! 464:
! 465:
! 466: # func_show_eval_locale cmd [fail_exp]
! 467: # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
! 468: # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
! 469: # is given, then evaluate it. Use the saved locale for evaluation.
! 470: func_show_eval_locale ()
! 471: {
! 472: my_cmd="$1"
! 473: my_fail_exp="${2-:}"
! 474:
! 475: ${opt_silent-false} || {
! 476: func_quote_for_expand "$my_cmd"
! 477: eval "func_echo $func_quote_for_expand_result"
! 478: }
! 479:
! 480: if ${opt_dry_run-false}; then :; else
! 481: eval "$lt_user_locale
! 482: $my_cmd"
! 483: my_status=$?
! 484: eval "$lt_safe_locale"
! 485: if test "$my_status" -eq 0; then :; else
! 486: eval "(exit $my_status); $my_fail_exp"
! 487: fi
! 488: fi
! 489: }
! 490:
! 491:
! 492:
! 493:
! 494:
! 495: # func_version
! 496: # Echo version message to standard output and exit.
! 497: func_version ()
! 498: {
! 499: $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
! 500: s/^# //
! 501: s/^# *$//
! 502: s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
! 503: p
! 504: }' < "$progpath"
! 505: exit $?
! 506: }
! 507:
! 508: # func_usage
! 509: # Echo short help message to standard output and exit.
! 510: func_usage ()
! 511: {
! 512: $SED -n '/^# Usage:/,/# -h/ {
! 513: s/^# //
! 514: s/^# *$//
! 515: s/\$progname/'$progname'/
! 516: p
! 517: }' < "$progpath"
! 518: $ECHO
! 519: $ECHO "run \`$progname --help | more' for full usage"
! 520: exit $?
! 521: }
! 522:
! 523: # func_help
! 524: # Echo long help message to standard output and exit.
! 525: func_help ()
! 526: {
! 527: $SED -n '/^# Usage:/,/# Report bugs to/ {
! 528: s/^# //
! 529: s/^# *$//
! 530: s*\$progname*'$progname'*
! 531: s*\$host*'"$host"'*
! 532: s*\$SHELL*'"$SHELL"'*
! 533: s*\$LTCC*'"$LTCC"'*
! 534: s*\$LTCFLAGS*'"$LTCFLAGS"'*
! 535: s*\$LD*'"$LD"'*
! 536: s/\$with_gnu_ld/'"$with_gnu_ld"'/
! 537: s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
! 538: s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
! 539: p
! 540: }' < "$progpath"
! 541: exit $?
! 542: }
! 543:
! 544: # func_missing_arg argname
! 545: # Echo program name prefixed message to standard error and set global
! 546: # exit_cmd.
! 547: func_missing_arg ()
! 548: {
! 549: func_error "missing argument for $1"
! 550: exit_cmd=exit
! 551: }
! 552:
! 553: exit_cmd=:
! 554:
! 555:
! 556:
! 557:
! 558:
! 559: # Check that we have a working $ECHO.
! 560: if test "X$1" = X--no-reexec; then
! 561: # Discard the --no-reexec flag, and continue.
! 562: shift
! 563: elif test "X$1" = X--fallback-echo; then
! 564: # Avoid inline document here, it may be left over
! 565: :
! 566: elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
! 567: # Yippee, $ECHO works!
! 568: :
! 569: else
! 570: # Restart under the correct shell, and then maybe $ECHO will work.
! 571: exec $SHELL "$progpath" --no-reexec ${1+"$@"}
! 572: fi
! 573:
! 574: if test "X$1" = X--fallback-echo; then
! 575: # used as fallback echo
! 576: shift
! 577: cat <<EOF
! 578: $*
! 579: EOF
! 580: exit $EXIT_SUCCESS
! 581: fi
! 582:
! 583: magic="%%%MAGIC variable%%%"
! 584: magic_exe="%%%MAGIC EXE variable%%%"
! 585:
! 586: # Global variables.
! 587: # $mode is unset
! 588: nonopt=
! 589: execute_dlfiles=
! 590: preserve_args=
! 591: lo2o="s/\\.lo\$/.${objext}/"
! 592: o2lo="s/\\.${objext}\$/.lo/"
! 593: extracted_archives=
! 594: extracted_serial=0
! 595:
! 596: opt_dry_run=false
! 597: opt_duplicate_deps=false
! 598: opt_silent=false
! 599: opt_debug=:
! 600:
! 601: # If this variable is set in any of the actions, the command in it
! 602: # will be execed at the end. This prevents here-documents from being
! 603: # left over by shells.
! 604: exec_cmd=
! 605:
! 606: # func_fatal_configuration arg...
! 607: # Echo program name prefixed message to standard error, followed by
! 608: # a configuration failure hint, and exit.
! 609: func_fatal_configuration ()
! 610: {
! 611: func_error ${1+"$@"}
! 612: func_error "See the $PACKAGE documentation for more information."
! 613: func_fatal_error "Fatal configuration error."
! 614: }
! 615:
! 616:
! 617: # func_config
! 618: # Display the configuration for all the tags in this script.
! 619: func_config ()
! 620: {
! 621: re_begincf='^# ### BEGIN LIBTOOL'
! 622: re_endcf='^# ### END LIBTOOL'
! 623:
! 624: # Default configuration.
! 625: $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
! 626:
! 627: # Now print the configurations for the tags.
! 628: for tagname in $taglist; do
! 629: $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
! 630: done
! 631:
! 632: exit $?
! 633: }
! 634:
! 635: # func_features
! 636: # Display the features supported by this script.
! 637: func_features ()
! 638: {
! 639: $ECHO "host: $host"
! 640: if test "$build_libtool_libs" = yes; then
! 641: $ECHO "enable shared libraries"
! 642: else
! 643: $ECHO "disable shared libraries"
! 644: fi
! 645: if test "$build_old_libs" = yes; then
! 646: $ECHO "enable static libraries"
! 647: else
! 648: $ECHO "disable static libraries"
! 649: fi
! 650:
! 651: exit $?
! 652: }
! 653:
! 654: # func_enable_tag tagname
! 655: # Verify that TAGNAME is valid, and either flag an error and exit, or
! 656: # enable the TAGNAME tag. We also add TAGNAME to the global $taglist
! 657: # variable here.
! 658: func_enable_tag ()
! 659: {
! 660: # Global variable:
! 661: tagname="$1"
! 662:
! 663: re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
! 664: re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
! 665: sed_extractcf="/$re_begincf/,/$re_endcf/p"
! 666:
! 667: # Validate tagname.
! 668: case $tagname in
! 669: *[!-_A-Za-z0-9,/]*)
! 670: func_fatal_error "invalid tag name: $tagname"
! 671: ;;
! 672: esac
! 673:
! 674: # Don't test for the "default" C tag, as we know it's
! 675: # there but not specially marked.
! 676: case $tagname in
! 677: CC) ;;
! 678: *)
! 679: if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
! 680: taglist="$taglist $tagname"
! 681:
! 682: # Evaluate the configuration. Be careful to quote the path
! 683: # and the sed script, to avoid splitting on whitespace, but
! 684: # also don't use non-portable quotes within backquotes within
! 685: # quotes we have to do it in 2 steps:
! 686: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
! 687: eval "$extractedcf"
! 688: else
! 689: func_error "ignoring unknown tag $tagname"
! 690: fi
! 691: ;;
! 692: esac
! 693: }
! 694:
! 695: # Parse options once, thoroughly. This comes as soon as possible in
! 696: # the script to make things like `libtool --version' happen quickly.
! 697: {
! 698:
! 699: # Shorthand for --mode=foo, only valid as the first argument
! 700: case $1 in
! 701: clean|clea|cle|cl)
! 702: shift; set dummy --mode clean ${1+"$@"}; shift
! 703: ;;
! 704: compile|compil|compi|comp|com|co|c)
! 705: shift; set dummy --mode compile ${1+"$@"}; shift
! 706: ;;
! 707: execute|execut|execu|exec|exe|ex|e)
! 708: shift; set dummy --mode execute ${1+"$@"}; shift
! 709: ;;
! 710: finish|finis|fini|fin|fi|f)
! 711: shift; set dummy --mode finish ${1+"$@"}; shift
! 712: ;;
! 713: install|instal|insta|inst|ins|in|i)
! 714: shift; set dummy --mode install ${1+"$@"}; shift
! 715: ;;
! 716: link|lin|li|l)
! 717: shift; set dummy --mode link ${1+"$@"}; shift
! 718: ;;
! 719: uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
! 720: shift; set dummy --mode uninstall ${1+"$@"}; shift
! 721: ;;
! 722: esac
! 723:
! 724: # Parse non-mode specific arguments:
! 725: while test "$#" -gt 0; do
! 726: opt="$1"
! 727: shift
! 728:
! 729: case $opt in
! 730: --config) func_config ;;
! 731:
! 732: --debug) preserve_args="$preserve_args $opt"
! 733: func_echo "enabling shell trace mode"
! 734: opt_debug='set -x'
! 735: $opt_debug
! 736: ;;
! 737:
! 738: -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
! 739: execute_dlfiles="$execute_dlfiles $1"
! 740: shift
! 741: ;;
! 742:
! 743: --dry-run | -n) opt_dry_run=: ;;
! 744: --features) func_features ;;
! 745: --finish) mode="finish" ;;
! 746:
! 747: --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
! 748: case $1 in
! 749: # Valid mode arguments:
! 750: clean) ;;
! 751: compile) ;;
! 752: execute) ;;
! 753: finish) ;;
! 754: install) ;;
! 755: link) ;;
! 756: relink) ;;
! 757: uninstall) ;;
! 758:
! 759: # Catch anything else as an error
! 760: *) func_error "invalid argument for $opt"
! 761: exit_cmd=exit
! 762: break
! 763: ;;
! 764: esac
! 765:
! 766: mode="$1"
! 767: shift
! 768: ;;
! 769:
! 770: --preserve-dup-deps)
! 771: opt_duplicate_deps=: ;;
! 772:
! 773: --quiet|--silent) preserve_args="$preserve_args $opt"
! 774: opt_silent=:
! 775: ;;
! 776:
! 777: --verbose| -v) preserve_args="$preserve_args $opt"
! 778: opt_silent=false
! 779: ;;
! 780:
! 781: --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
! 782: preserve_args="$preserve_args $opt $1"
! 783: func_enable_tag "$1" # tagname is set here
! 784: shift
! 785: ;;
! 786:
! 787: # Separate optargs to long options:
! 788: -dlopen=*|--mode=*|--tag=*)
! 789: func_opt_split "$opt"
! 790: set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
! 791: shift
! 792: ;;
! 793:
! 794: -\?|-h) func_usage ;;
! 795: --help) opt_help=: ;;
! 796: --version) func_version ;;
! 797:
! 798: -*) func_fatal_help "unrecognized option \`$opt'" ;;
! 799:
! 800: *) nonopt="$opt"
! 801: break
! 802: ;;
! 803: esac
! 804: done
! 805:
! 806:
! 807: case $host in
! 808: *cygwin* | *mingw* | *pw32* | *cegcc*)
! 809: # don't eliminate duplications in $postdeps and $predeps
! 810: opt_duplicate_compiler_generated_deps=:
! 811: ;;
! 812: *)
! 813: opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
! 814: ;;
! 815: esac
! 816:
! 817: # Having warned about all mis-specified options, bail out if
! 818: # anything was wrong.
! 819: $exit_cmd $EXIT_FAILURE
! 820: }
! 821:
! 822: # func_check_version_match
! 823: # Ensure that we are using m4 macros, and libtool script from the same
! 824: # release of libtool.
! 825: func_check_version_match ()
! 826: {
! 827: if test "$package_revision" != "$macro_revision"; then
! 828: if test "$VERSION" != "$macro_version"; then
! 829: if test -z "$macro_version"; then
! 830: cat >&2 <<_LT_EOF
! 831: $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
! 832: $progname: definition of this LT_INIT comes from an older release.
! 833: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
! 834: $progname: and run autoconf again.
! 835: _LT_EOF
! 836: else
! 837: cat >&2 <<_LT_EOF
! 838: $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
! 839: $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
! 840: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
! 841: $progname: and run autoconf again.
! 842: _LT_EOF
! 843: fi
! 844: else
! 845: cat >&2 <<_LT_EOF
! 846: $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
! 847: $progname: but the definition of this LT_INIT comes from revision $macro_revision.
! 848: $progname: You should recreate aclocal.m4 with macros from revision $package_revision
! 849: $progname: of $PACKAGE $VERSION and run autoconf again.
! 850: _LT_EOF
! 851: fi
! 852:
! 853: exit $EXIT_MISMATCH
! 854: fi
! 855: }
! 856:
! 857:
! 858: ## ----------- ##
! 859: ## Main. ##
! 860: ## ----------- ##
! 861:
! 862: $opt_help || {
! 863: # Sanity checks first:
! 864: func_check_version_match
! 865:
! 866: if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
! 867: func_fatal_configuration "not configured to build any kind of library"
! 868: fi
! 869:
! 870: test -z "$mode" && func_fatal_error "error: you must specify a MODE."
! 871:
! 872:
! 873: # Darwin sucks
! 874: eval std_shrext=\"$shrext_cmds\"
! 875:
! 876:
! 877: # Only execute mode is allowed to have -dlopen flags.
! 878: if test -n "$execute_dlfiles" && test "$mode" != execute; then
! 879: func_error "unrecognized option \`-dlopen'"
! 880: $ECHO "$help" 1>&2
! 881: exit $EXIT_FAILURE
! 882: fi
! 883:
! 884: # Change the help message to a mode-specific one.
! 885: generic_help="$help"
! 886: help="Try \`$progname --help --mode=$mode' for more information."
! 887: }
! 888:
! 889:
! 890: # func_lalib_p file
! 891: # True iff FILE is a libtool `.la' library or `.lo' object file.
! 892: # This function is only a basic sanity check; it will hardly flush out
! 893: # determined imposters.
! 894: func_lalib_p ()
! 895: {
! 896: test -f "$1" &&
! 897: $SED -e 4q "$1" 2>/dev/null \
! 898: | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
! 899: }
! 900:
! 901: # func_lalib_unsafe_p file
! 902: # True iff FILE is a libtool `.la' library or `.lo' object file.
! 903: # This function implements the same check as func_lalib_p without
! 904: # resorting to external programs. To this end, it redirects stdin and
! 905: # closes it afterwards, without saving the original file descriptor.
! 906: # As a safety measure, use it only where a negative result would be
! 907: # fatal anyway. Works if `file' does not exist.
! 908: func_lalib_unsafe_p ()
! 909: {
! 910: lalib_p=no
! 911: if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
! 912: for lalib_p_l in 1 2 3 4
! 913: do
! 914: read lalib_p_line
! 915: case "$lalib_p_line" in
! 916: \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
! 917: esac
! 918: done
! 919: exec 0<&5 5<&-
! 920: fi
! 921: test "$lalib_p" = yes
! 922: }
! 923:
! 924: # func_ltwrapper_script_p file
! 925: # True iff FILE is a libtool wrapper script
! 926: # This function is only a basic sanity check; it will hardly flush out
! 927: # determined imposters.
! 928: func_ltwrapper_script_p ()
! 929: {
! 930: func_lalib_p "$1"
! 931: }
! 932:
! 933: # func_ltwrapper_executable_p file
! 934: # True iff FILE is a libtool wrapper executable
! 935: # This function is only a basic sanity check; it will hardly flush out
! 936: # determined imposters.
! 937: func_ltwrapper_executable_p ()
! 938: {
! 939: func_ltwrapper_exec_suffix=
! 940: case $1 in
! 941: *.exe) ;;
! 942: *) func_ltwrapper_exec_suffix=.exe ;;
! 943: esac
! 944: $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
! 945: }
! 946:
! 947: # func_ltwrapper_scriptname file
! 948: # Assumes file is an ltwrapper_executable
! 949: # uses $file to determine the appropriate filename for a
! 950: # temporary ltwrapper_script.
! 951: func_ltwrapper_scriptname ()
! 952: {
! 953: func_ltwrapper_scriptname_result=""
! 954: if func_ltwrapper_executable_p "$1"; then
! 955: func_dirname_and_basename "$1" "" "."
! 956: func_stripname '' '.exe' "$func_basename_result"
! 957: func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
! 958: fi
! 959: }
! 960:
! 961: # func_ltwrapper_p file
! 962: # True iff FILE is a libtool wrapper script or wrapper executable
! 963: # This function is only a basic sanity check; it will hardly flush out
! 964: # determined imposters.
! 965: func_ltwrapper_p ()
! 966: {
! 967: func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
! 968: }
! 969:
! 970:
! 971: # func_execute_cmds commands fail_cmd
! 972: # Execute tilde-delimited COMMANDS.
! 973: # If FAIL_CMD is given, eval that upon failure.
! 974: # FAIL_CMD may read-access the current command in variable CMD!
! 975: func_execute_cmds ()
! 976: {
! 977: $opt_debug
! 978: save_ifs=$IFS; IFS='~'
! 979: for cmd in $1; do
! 980: IFS=$save_ifs
! 981: eval cmd=\"$cmd\"
! 982: func_show_eval "$cmd" "${2-:}"
! 983: done
! 984: IFS=$save_ifs
! 985: }
! 986:
! 987:
! 988: # func_source file
! 989: # Source FILE, adding directory component if necessary.
! 990: # Note that it is not necessary on cygwin/mingw to append a dot to
! 991: # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
! 992: # behavior happens only for exec(3), not for open(2)! Also, sourcing
! 993: # `FILE.' does not work on cygwin managed mounts.
! 994: func_source ()
! 995: {
! 996: $opt_debug
! 997: case $1 in
! 998: */* | *\\*) . "$1" ;;
! 999: *) . "./$1" ;;
! 1000: esac
! 1001: }
! 1002:
! 1003:
! 1004: # func_infer_tag arg
! 1005: # Infer tagged configuration to use if any are available and
! 1006: # if one wasn't chosen via the "--tag" command line option.
! 1007: # Only attempt this if the compiler in the base compile
! 1008: # command doesn't match the default compiler.
! 1009: # arg is usually of the form 'gcc ...'
! 1010: func_infer_tag ()
! 1011: {
! 1012: $opt_debug
! 1013: if test -n "$available_tags" && test -z "$tagname"; then
! 1014: CC_quoted=
! 1015: for arg in $CC; do
! 1016: func_quote_for_eval "$arg"
! 1017: CC_quoted="$CC_quoted $func_quote_for_eval_result"
! 1018: done
! 1019: case $@ in
! 1020: # Blanks in the command may have been stripped by the calling shell,
! 1021: # but not from the CC environment variable when configure was run.
! 1022: " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
! 1023: # Blanks at the start of $base_compile will cause this to fail
! 1024: # if we don't check for them as well.
! 1025: *)
! 1026: for z in $available_tags; do
! 1027: if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
! 1028: # Evaluate the configuration.
! 1029: eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
! 1030: CC_quoted=
! 1031: for arg in $CC; do
! 1032: # Double-quote args containing other shell metacharacters.
! 1033: func_quote_for_eval "$arg"
! 1034: CC_quoted="$CC_quoted $func_quote_for_eval_result"
! 1035: done
! 1036: case "$@ " in
! 1037: " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
! 1038: # The compiler in the base compile command matches
! 1039: # the one in the tagged configuration.
! 1040: # Assume this is the tagged configuration we want.
! 1041: tagname=$z
! 1042: break
! 1043: ;;
! 1044: esac
! 1045: fi
! 1046: done
! 1047: # If $tagname still isn't set, then no tagged configuration
! 1048: # was found and let the user know that the "--tag" command
! 1049: # line option must be used.
! 1050: if test -z "$tagname"; then
! 1051: func_echo "unable to infer tagged configuration"
! 1052: func_fatal_error "specify a tag with \`--tag'"
! 1053: # else
! 1054: # func_verbose "using $tagname tagged configuration"
! 1055: fi
! 1056: ;;
! 1057: esac
! 1058: fi
! 1059: }
! 1060:
! 1061:
! 1062:
! 1063: # func_write_libtool_object output_name pic_name nonpic_name
! 1064: # Create a libtool object file (analogous to a ".la" file),
! 1065: # but don't create it if we're doing a dry run.
! 1066: func_write_libtool_object ()
! 1067: {
! 1068: write_libobj=${1}
! 1069: if test "$build_libtool_libs" = yes; then
! 1070: write_lobj=\'${2}\'
! 1071: else
! 1072: write_lobj=none
! 1073: fi
! 1074:
! 1075: if test "$build_old_libs" = yes; then
! 1076: write_oldobj=\'${3}\'
! 1077: else
! 1078: write_oldobj=none
! 1079: fi
! 1080:
! 1081: $opt_dry_run || {
! 1082: cat >${write_libobj}T <<EOF
! 1083: # $write_libobj - a libtool object file
! 1084: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 1085: #
! 1086: # Please DO NOT delete this file!
! 1087: # It is necessary for linking the library.
! 1088:
! 1089: # Name of the PIC object.
! 1090: pic_object=$write_lobj
! 1091:
! 1092: # Name of the non-PIC object
! 1093: non_pic_object=$write_oldobj
! 1094:
! 1095: EOF
! 1096: $MV "${write_libobj}T" "${write_libobj}"
! 1097: }
! 1098: }
! 1099:
! 1100: # func_mode_compile arg...
! 1101: func_mode_compile ()
! 1102: {
! 1103: $opt_debug
! 1104: # Get the compilation command and the source file.
! 1105: base_compile=
! 1106: srcfile="$nonopt" # always keep a non-empty value in "srcfile"
! 1107: suppress_opt=yes
! 1108: suppress_output=
! 1109: arg_mode=normal
! 1110: libobj=
! 1111: later=
! 1112: pie_flag=
! 1113:
! 1114: for arg
! 1115: do
! 1116: case $arg_mode in
! 1117: arg )
! 1118: # do not "continue". Instead, add this to base_compile
! 1119: lastarg="$arg"
! 1120: arg_mode=normal
! 1121: ;;
! 1122:
! 1123: target )
! 1124: libobj="$arg"
! 1125: arg_mode=normal
! 1126: continue
! 1127: ;;
! 1128:
! 1129: normal )
! 1130: # Accept any command-line options.
! 1131: case $arg in
! 1132: -o)
! 1133: test -n "$libobj" && \
! 1134: func_fatal_error "you cannot specify \`-o' more than once"
! 1135: arg_mode=target
! 1136: continue
! 1137: ;;
! 1138:
! 1139: -pie | -fpie | -fPIE)
! 1140: pie_flag="$pie_flag $arg"
! 1141: continue
! 1142: ;;
! 1143:
! 1144: -shared | -static | -prefer-pic | -prefer-non-pic)
! 1145: later="$later $arg"
! 1146: continue
! 1147: ;;
! 1148:
! 1149: -no-suppress)
! 1150: suppress_opt=no
! 1151: continue
! 1152: ;;
! 1153:
! 1154: -Xcompiler)
! 1155: arg_mode=arg # the next one goes into the "base_compile" arg list
! 1156: continue # The current "srcfile" will either be retained or
! 1157: ;; # replaced later. I would guess that would be a bug.
! 1158:
! 1159: -Wc,*)
! 1160: func_stripname '-Wc,' '' "$arg"
! 1161: args=$func_stripname_result
! 1162: lastarg=
! 1163: save_ifs="$IFS"; IFS=','
! 1164: for arg in $args; do
! 1165: IFS="$save_ifs"
! 1166: func_quote_for_eval "$arg"
! 1167: lastarg="$lastarg $func_quote_for_eval_result"
! 1168: done
! 1169: IFS="$save_ifs"
! 1170: func_stripname ' ' '' "$lastarg"
! 1171: lastarg=$func_stripname_result
! 1172:
! 1173: # Add the arguments to base_compile.
! 1174: base_compile="$base_compile $lastarg"
! 1175: continue
! 1176: ;;
! 1177:
! 1178: *)
! 1179: # Accept the current argument as the source file.
! 1180: # The previous "srcfile" becomes the current argument.
! 1181: #
! 1182: lastarg="$srcfile"
! 1183: srcfile="$arg"
! 1184: ;;
! 1185: esac # case $arg
! 1186: ;;
! 1187: esac # case $arg_mode
! 1188:
! 1189: # Aesthetically quote the previous argument.
! 1190: func_quote_for_eval "$lastarg"
! 1191: base_compile="$base_compile $func_quote_for_eval_result"
! 1192: done # for arg
! 1193:
! 1194: case $arg_mode in
! 1195: arg)
! 1196: func_fatal_error "you must specify an argument for -Xcompile"
! 1197: ;;
! 1198: target)
! 1199: func_fatal_error "you must specify a target with \`-o'"
! 1200: ;;
! 1201: *)
! 1202: # Get the name of the library object.
! 1203: test -z "$libobj" && {
! 1204: func_basename "$srcfile"
! 1205: libobj="$func_basename_result"
! 1206: }
! 1207: ;;
! 1208: esac
! 1209:
! 1210: # Recognize several different file suffixes.
! 1211: # If the user specifies -o file.o, it is replaced with file.lo
! 1212: case $libobj in
! 1213: *.[cCFSifmso] | \
! 1214: *.ada | *.adb | *.ads | *.asm | \
! 1215: *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
! 1216: *.[fF][09]? | *.for | *.java | *.obj | *.sx)
! 1217: func_xform "$libobj"
! 1218: libobj=$func_xform_result
! 1219: ;;
! 1220: esac
! 1221:
! 1222: case $libobj in
! 1223: *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
! 1224: *)
! 1225: func_fatal_error "cannot determine name of library object from \`$libobj'"
! 1226: ;;
! 1227: esac
! 1228:
! 1229: func_infer_tag $base_compile
! 1230:
! 1231: for arg in $later; do
! 1232: case $arg in
! 1233: -shared)
! 1234: test "$build_libtool_libs" != yes && \
! 1235: func_fatal_configuration "can not build a shared library"
! 1236: build_old_libs=no
! 1237: continue
! 1238: ;;
! 1239:
! 1240: -static)
! 1241: build_libtool_libs=no
! 1242: build_old_libs=yes
! 1243: continue
! 1244: ;;
! 1245:
! 1246: -prefer-pic)
! 1247: pic_mode=yes
! 1248: continue
! 1249: ;;
! 1250:
! 1251: -prefer-non-pic)
! 1252: pic_mode=no
! 1253: continue
! 1254: ;;
! 1255: esac
! 1256: done
! 1257:
! 1258: func_quote_for_eval "$libobj"
! 1259: test "X$libobj" != "X$func_quote_for_eval_result" \
! 1260: && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
! 1261: && func_warning "libobj name \`$libobj' may not contain shell special characters."
! 1262: func_dirname_and_basename "$obj" "/" ""
! 1263: objname="$func_basename_result"
! 1264: xdir="$func_dirname_result"
! 1265: lobj=${xdir}$objdir/$objname
! 1266:
! 1267: test -z "$base_compile" && \
! 1268: func_fatal_help "you must specify a compilation command"
! 1269:
! 1270: # Delete any leftover library objects.
! 1271: if test "$build_old_libs" = yes; then
! 1272: removelist="$obj $lobj $libobj ${libobj}T"
! 1273: else
! 1274: removelist="$lobj $libobj ${libobj}T"
! 1275: fi
! 1276:
! 1277: # On Cygwin there's no "real" PIC flag so we must build both object types
! 1278: case $host_os in
! 1279: cygwin* | mingw* | pw32* | os2* | cegcc*)
! 1280: pic_mode=default
! 1281: ;;
! 1282: esac
! 1283: if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
! 1284: # non-PIC code in shared libraries is not supported
! 1285: pic_mode=default
! 1286: fi
! 1287:
! 1288: # Calculate the filename of the output object if compiler does
! 1289: # not support -o with -c
! 1290: if test "$compiler_c_o" = no; then
! 1291: output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
! 1292: lockfile="$output_obj.lock"
! 1293: else
! 1294: output_obj=
! 1295: need_locks=no
! 1296: lockfile=
! 1297: fi
! 1298:
! 1299: # Lock this critical section if it is needed
! 1300: # We use this script file to make the link, it avoids creating a new file
! 1301: if test "$need_locks" = yes; then
! 1302: until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
! 1303: func_echo "Waiting for $lockfile to be removed"
! 1304: sleep 2
! 1305: done
! 1306: elif test "$need_locks" = warn; then
! 1307: if test -f "$lockfile"; then
! 1308: $ECHO "\
! 1309: *** ERROR, $lockfile exists and contains:
! 1310: `cat $lockfile 2>/dev/null`
! 1311:
! 1312: This indicates that another process is trying to use the same
! 1313: temporary object file, and libtool could not work around it because
! 1314: your compiler does not support \`-c' and \`-o' together. If you
! 1315: repeat this compilation, it may succeed, by chance, but you had better
! 1316: avoid parallel builds (make -j) in this platform, or get a better
! 1317: compiler."
! 1318:
! 1319: $opt_dry_run || $RM $removelist
! 1320: exit $EXIT_FAILURE
! 1321: fi
! 1322: removelist="$removelist $output_obj"
! 1323: $ECHO "$srcfile" > "$lockfile"
! 1324: fi
! 1325:
! 1326: $opt_dry_run || $RM $removelist
! 1327: removelist="$removelist $lockfile"
! 1328: trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
! 1329:
! 1330: if test -n "$fix_srcfile_path"; then
! 1331: eval srcfile=\"$fix_srcfile_path\"
! 1332: fi
! 1333: func_quote_for_eval "$srcfile"
! 1334: qsrcfile=$func_quote_for_eval_result
! 1335:
! 1336: # Only build a PIC object if we are building libtool libraries.
! 1337: if test "$build_libtool_libs" = yes; then
! 1338: # Without this assignment, base_compile gets emptied.
! 1339: fbsd_hideous_sh_bug=$base_compile
! 1340:
! 1341: if test "$pic_mode" != no; then
! 1342: command="$base_compile $qsrcfile $pic_flag"
! 1343: else
! 1344: # Don't build PIC code
! 1345: command="$base_compile $qsrcfile"
! 1346: fi
! 1347:
! 1348: func_mkdir_p "$xdir$objdir"
! 1349:
! 1350: if test -z "$output_obj"; then
! 1351: # Place PIC objects in $objdir
! 1352: command="$command -o $lobj"
! 1353: fi
! 1354:
! 1355: func_show_eval_locale "$command" \
! 1356: 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
! 1357:
! 1358: if test "$need_locks" = warn &&
! 1359: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
! 1360: $ECHO "\
! 1361: *** ERROR, $lockfile contains:
! 1362: `cat $lockfile 2>/dev/null`
! 1363:
! 1364: but it should contain:
! 1365: $srcfile
! 1366:
! 1367: This indicates that another process is trying to use the same
! 1368: temporary object file, and libtool could not work around it because
! 1369: your compiler does not support \`-c' and \`-o' together. If you
! 1370: repeat this compilation, it may succeed, by chance, but you had better
! 1371: avoid parallel builds (make -j) in this platform, or get a better
! 1372: compiler."
! 1373:
! 1374: $opt_dry_run || $RM $removelist
! 1375: exit $EXIT_FAILURE
! 1376: fi
! 1377:
! 1378: # Just move the object if needed, then go on to compile the next one
! 1379: if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
! 1380: func_show_eval '$MV "$output_obj" "$lobj"' \
! 1381: 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
! 1382: fi
! 1383:
! 1384: # Allow error messages only from the first compilation.
! 1385: if test "$suppress_opt" = yes; then
! 1386: suppress_output=' >/dev/null 2>&1'
! 1387: fi
! 1388: fi
! 1389:
! 1390: # Only build a position-dependent object if we build old libraries.
! 1391: if test "$build_old_libs" = yes; then
! 1392: if test "$pic_mode" != yes; then
! 1393: # Don't build PIC code
! 1394: command="$base_compile $qsrcfile$pie_flag"
! 1395: else
! 1396: command="$base_compile $qsrcfile $pic_flag"
! 1397: fi
! 1398: if test "$compiler_c_o" = yes; then
! 1399: command="$command -o $obj"
! 1400: fi
! 1401:
! 1402: # Suppress compiler output if we already did a PIC compilation.
! 1403: command="$command$suppress_output"
! 1404: func_show_eval_locale "$command" \
! 1405: '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
! 1406:
! 1407: if test "$need_locks" = warn &&
! 1408: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
! 1409: $ECHO "\
! 1410: *** ERROR, $lockfile contains:
! 1411: `cat $lockfile 2>/dev/null`
! 1412:
! 1413: but it should contain:
! 1414: $srcfile
! 1415:
! 1416: This indicates that another process is trying to use the same
! 1417: temporary object file, and libtool could not work around it because
! 1418: your compiler does not support \`-c' and \`-o' together. If you
! 1419: repeat this compilation, it may succeed, by chance, but you had better
! 1420: avoid parallel builds (make -j) in this platform, or get a better
! 1421: compiler."
! 1422:
! 1423: $opt_dry_run || $RM $removelist
! 1424: exit $EXIT_FAILURE
! 1425: fi
! 1426:
! 1427: # Just move the object if needed
! 1428: if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
! 1429: func_show_eval '$MV "$output_obj" "$obj"' \
! 1430: 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
! 1431: fi
! 1432: fi
! 1433:
! 1434: $opt_dry_run || {
! 1435: func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
! 1436:
! 1437: # Unlock the critical section if it was locked
! 1438: if test "$need_locks" != no; then
! 1439: removelist=$lockfile
! 1440: $RM "$lockfile"
! 1441: fi
! 1442: }
! 1443:
! 1444: exit $EXIT_SUCCESS
! 1445: }
! 1446:
! 1447: $opt_help || {
! 1448: test "$mode" = compile && func_mode_compile ${1+"$@"}
! 1449: }
! 1450:
! 1451: func_mode_help ()
! 1452: {
! 1453: # We need to display help for each of the modes.
! 1454: case $mode in
! 1455: "")
! 1456: # Generic help is extracted from the usage comments
! 1457: # at the start of this file.
! 1458: func_help
! 1459: ;;
! 1460:
! 1461: clean)
! 1462: $ECHO \
! 1463: "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
! 1464:
! 1465: Remove files from the build directory.
! 1466:
! 1467: RM is the name of the program to use to delete files associated with each FILE
! 1468: (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
! 1469: to RM.
! 1470:
! 1471: If FILE is a libtool library, object or program, all the files associated
! 1472: with it are deleted. Otherwise, only FILE itself is deleted using RM."
! 1473: ;;
! 1474:
! 1475: compile)
! 1476: $ECHO \
! 1477: "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
! 1478:
! 1479: Compile a source file into a libtool library object.
! 1480:
! 1481: This mode accepts the following additional options:
! 1482:
! 1483: -o OUTPUT-FILE set the output file name to OUTPUT-FILE
! 1484: -no-suppress do not suppress compiler output for multiple passes
! 1485: -prefer-pic try to building PIC objects only
! 1486: -prefer-non-pic try to building non-PIC objects only
! 1487: -shared do not build a \`.o' file suitable for static linking
! 1488: -static only build a \`.o' file suitable for static linking
! 1489:
! 1490: COMPILE-COMMAND is a command to be used in creating a \`standard' object file
! 1491: from the given SOURCEFILE.
! 1492:
! 1493: The output file name is determined by removing the directory component from
! 1494: SOURCEFILE, then substituting the C source code suffix \`.c' with the
! 1495: library object suffix, \`.lo'."
! 1496: ;;
! 1497:
! 1498: execute)
! 1499: $ECHO \
! 1500: "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
! 1501:
! 1502: Automatically set library path, then run a program.
! 1503:
! 1504: This mode accepts the following additional options:
! 1505:
! 1506: -dlopen FILE add the directory containing FILE to the library path
! 1507:
! 1508: This mode sets the library path environment variable according to \`-dlopen'
! 1509: flags.
! 1510:
! 1511: If any of the ARGS are libtool executable wrappers, then they are translated
! 1512: into their corresponding uninstalled binary, and any of their required library
! 1513: directories are added to the library path.
! 1514:
! 1515: Then, COMMAND is executed, with ARGS as arguments."
! 1516: ;;
! 1517:
! 1518: finish)
! 1519: $ECHO \
! 1520: "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
! 1521:
! 1522: Complete the installation of libtool libraries.
! 1523:
! 1524: Each LIBDIR is a directory that contains libtool libraries.
! 1525:
! 1526: The commands that this mode executes may require superuser privileges. Use
! 1527: the \`--dry-run' option if you just want to see what would be executed."
! 1528: ;;
! 1529:
! 1530: install)
! 1531: $ECHO \
! 1532: "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
! 1533:
! 1534: Install executables or libraries.
! 1535:
! 1536: INSTALL-COMMAND is the installation command. The first component should be
! 1537: either the \`install' or \`cp' program.
! 1538:
! 1539: The following components of INSTALL-COMMAND are treated specially:
! 1540:
! 1541: -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
! 1542:
! 1543: The rest of the components are interpreted as arguments to that command (only
! 1544: BSD-compatible install options are recognized)."
! 1545: ;;
! 1546:
! 1547: link)
! 1548: $ECHO \
! 1549: "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
! 1550:
! 1551: Link object files or libraries together to form another library, or to
! 1552: create an executable program.
! 1553:
! 1554: LINK-COMMAND is a command using the C compiler that you would use to create
! 1555: a program from several object files.
! 1556:
! 1557: The following components of LINK-COMMAND are treated specially:
! 1558:
! 1559: -all-static do not do any dynamic linking at all
! 1560: -avoid-version do not add a version suffix if possible
! 1561: -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
! 1562: -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
! 1563: -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
! 1564: -export-symbols SYMFILE
! 1565: try to export only the symbols listed in SYMFILE
! 1566: -export-symbols-regex REGEX
! 1567: try to export only the symbols matching REGEX
! 1568: -LLIBDIR search LIBDIR for required installed libraries
! 1569: -lNAME OUTPUT-FILE requires the installed library libNAME
! 1570: -module build a library that can dlopened
! 1571: -no-fast-install disable the fast-install mode
! 1572: -no-install link a not-installable executable
! 1573: -no-undefined declare that a library does not refer to external symbols
! 1574: -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
! 1575: -objectlist FILE Use a list of object files found in FILE to specify objects
! 1576: -precious-files-regex REGEX
! 1577: don't remove output files matching REGEX
! 1578: -release RELEASE specify package release information
! 1579: -rpath LIBDIR the created library will eventually be installed in LIBDIR
! 1580: -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
! 1581: -shared only do dynamic linking of libtool libraries
! 1582: -shrext SUFFIX override the standard shared library file extension
! 1583: -static do not do any dynamic linking of uninstalled libtool libraries
! 1584: -static-libtool-libs
! 1585: do not do any dynamic linking of libtool libraries
! 1586: -version-info CURRENT[:REVISION[:AGE]]
! 1587: specify library version info [each variable defaults to 0]
! 1588: -weak LIBNAME declare that the target provides the LIBNAME interface
! 1589:
! 1590: All other options (arguments beginning with \`-') are ignored.
! 1591:
! 1592: Every other argument is treated as a filename. Files ending in \`.la' are
! 1593: treated as uninstalled libtool libraries, other files are standard or library
! 1594: object files.
! 1595:
! 1596: If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
! 1597: only library objects (\`.lo' files) may be specified, and \`-rpath' is
! 1598: required, except when creating a convenience library.
! 1599:
! 1600: If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
! 1601: using \`ar' and \`ranlib', or on Windows using \`lib'.
! 1602:
! 1603: If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
! 1604: is created, otherwise an executable program is created."
! 1605: ;;
! 1606:
! 1607: uninstall)
! 1608: $ECHO \
! 1609: "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
! 1610:
! 1611: Remove libraries from an installation directory.
! 1612:
! 1613: RM is the name of the program to use to delete files associated with each FILE
! 1614: (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
! 1615: to RM.
! 1616:
! 1617: If FILE is a libtool library, all the files associated with it are deleted.
! 1618: Otherwise, only FILE itself is deleted using RM."
! 1619: ;;
! 1620:
! 1621: *)
! 1622: func_fatal_help "invalid operation mode \`$mode'"
! 1623: ;;
! 1624: esac
! 1625:
! 1626: $ECHO
! 1627: $ECHO "Try \`$progname --help' for more information about other modes."
! 1628:
! 1629: exit $?
! 1630: }
! 1631:
! 1632: # Now that we've collected a possible --mode arg, show help if necessary
! 1633: $opt_help && func_mode_help
! 1634:
! 1635:
! 1636: # func_mode_execute arg...
! 1637: func_mode_execute ()
! 1638: {
! 1639: $opt_debug
! 1640: # The first argument is the command name.
! 1641: cmd="$nonopt"
! 1642: test -z "$cmd" && \
! 1643: func_fatal_help "you must specify a COMMAND"
! 1644:
! 1645: # Handle -dlopen flags immediately.
! 1646: for file in $execute_dlfiles; do
! 1647: test -f "$file" \
! 1648: || func_fatal_help "\`$file' is not a file"
! 1649:
! 1650: dir=
! 1651: case $file in
! 1652: *.la)
! 1653: # Check to see that this really is a libtool archive.
! 1654: func_lalib_unsafe_p "$file" \
! 1655: || func_fatal_help "\`$lib' is not a valid libtool archive"
! 1656:
! 1657: # Read the libtool library.
! 1658: dlname=
! 1659: library_names=
! 1660: func_source "$file"
! 1661:
! 1662: # Skip this library if it cannot be dlopened.
! 1663: if test -z "$dlname"; then
! 1664: # Warn if it was a shared library.
! 1665: test -n "$library_names" && \
! 1666: func_warning "\`$file' was not linked with \`-export-dynamic'"
! 1667: continue
! 1668: fi
! 1669:
! 1670: func_dirname "$file" "" "."
! 1671: dir="$func_dirname_result"
! 1672:
! 1673: if test -f "$dir/$objdir/$dlname"; then
! 1674: dir="$dir/$objdir"
! 1675: else
! 1676: if test ! -f "$dir/$dlname"; then
! 1677: func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
! 1678: fi
! 1679: fi
! 1680: ;;
! 1681:
! 1682: *.lo)
! 1683: # Just add the directory containing the .lo file.
! 1684: func_dirname "$file" "" "."
! 1685: dir="$func_dirname_result"
! 1686: ;;
! 1687:
! 1688: *)
! 1689: func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
! 1690: continue
! 1691: ;;
! 1692: esac
! 1693:
! 1694: # Get the absolute pathname.
! 1695: absdir=`cd "$dir" && pwd`
! 1696: test -n "$absdir" && dir="$absdir"
! 1697:
! 1698: # Now add the directory to shlibpath_var.
! 1699: if eval "test -z \"\$$shlibpath_var\""; then
! 1700: eval "$shlibpath_var=\"\$dir\""
! 1701: else
! 1702: eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
! 1703: fi
! 1704: done
! 1705:
! 1706: # This variable tells wrapper scripts just to set shlibpath_var
! 1707: # rather than running their programs.
! 1708: libtool_execute_magic="$magic"
! 1709:
! 1710: # Check if any of the arguments is a wrapper script.
! 1711: args=
! 1712: for file
! 1713: do
! 1714: case $file in
! 1715: -*) ;;
! 1716: *)
! 1717: # Do a test to see if this is really a libtool program.
! 1718: if func_ltwrapper_script_p "$file"; then
! 1719: func_source "$file"
! 1720: # Transform arg to wrapped name.
! 1721: file="$progdir/$program"
! 1722: elif func_ltwrapper_executable_p "$file"; then
! 1723: func_ltwrapper_scriptname "$file"
! 1724: func_source "$func_ltwrapper_scriptname_result"
! 1725: # Transform arg to wrapped name.
! 1726: file="$progdir/$program"
! 1727: fi
! 1728: ;;
! 1729: esac
! 1730: # Quote arguments (to preserve shell metacharacters).
! 1731: func_quote_for_eval "$file"
! 1732: args="$args $func_quote_for_eval_result"
! 1733: done
! 1734:
! 1735: if test "X$opt_dry_run" = Xfalse; then
! 1736: if test -n "$shlibpath_var"; then
! 1737: # Export the shlibpath_var.
! 1738: eval "export $shlibpath_var"
! 1739: fi
! 1740:
! 1741: # Restore saved environment variables
! 1742: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
! 1743: do
! 1744: eval "if test \"\${save_$lt_var+set}\" = set; then
! 1745: $lt_var=\$save_$lt_var; export $lt_var
! 1746: else
! 1747: $lt_unset $lt_var
! 1748: fi"
! 1749: done
! 1750:
! 1751: # Now prepare to actually exec the command.
! 1752: exec_cmd="\$cmd$args"
! 1753: else
! 1754: # Display what would be done.
! 1755: if test -n "$shlibpath_var"; then
! 1756: eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
! 1757: $ECHO "export $shlibpath_var"
! 1758: fi
! 1759: $ECHO "$cmd$args"
! 1760: exit $EXIT_SUCCESS
! 1761: fi
! 1762: }
! 1763:
! 1764: test "$mode" = execute && func_mode_execute ${1+"$@"}
! 1765:
! 1766:
! 1767: # func_mode_finish arg...
! 1768: func_mode_finish ()
! 1769: {
! 1770: $opt_debug
! 1771: libdirs="$nonopt"
! 1772: admincmds=
! 1773:
! 1774: if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
! 1775: for dir
! 1776: do
! 1777: libdirs="$libdirs $dir"
! 1778: done
! 1779:
! 1780: for libdir in $libdirs; do
! 1781: if test -n "$finish_cmds"; then
! 1782: # Do each command in the finish commands.
! 1783: func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
! 1784: '"$cmd"'"'
! 1785: fi
! 1786: if test -n "$finish_eval"; then
! 1787: # Do the single finish_eval.
! 1788: eval cmds=\"$finish_eval\"
! 1789: $opt_dry_run || eval "$cmds" || admincmds="$admincmds
! 1790: $cmds"
! 1791: fi
! 1792: done
! 1793: fi
! 1794:
! 1795: # Exit here if they wanted silent mode.
! 1796: $opt_silent && exit $EXIT_SUCCESS
! 1797:
! 1798: $ECHO "X----------------------------------------------------------------------" | $Xsed
! 1799: $ECHO "Libraries have been installed in:"
! 1800: for libdir in $libdirs; do
! 1801: $ECHO " $libdir"
! 1802: done
! 1803: $ECHO
! 1804: $ECHO "If you ever happen to want to link against installed libraries"
! 1805: $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
! 1806: $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
! 1807: $ECHO "flag during linking and do at least one of the following:"
! 1808: if test -n "$shlibpath_var"; then
! 1809: $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
! 1810: $ECHO " during execution"
! 1811: fi
! 1812: if test -n "$runpath_var"; then
! 1813: $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
! 1814: $ECHO " during linking"
! 1815: fi
! 1816: if test -n "$hardcode_libdir_flag_spec"; then
! 1817: libdir=LIBDIR
! 1818: eval flag=\"$hardcode_libdir_flag_spec\"
! 1819:
! 1820: $ECHO " - use the \`$flag' linker flag"
! 1821: fi
! 1822: if test -n "$admincmds"; then
! 1823: $ECHO " - have your system administrator run these commands:$admincmds"
! 1824: fi
! 1825: if test -f /etc/ld.so.conf; then
! 1826: $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
! 1827: fi
! 1828: $ECHO
! 1829:
! 1830: $ECHO "See any operating system documentation about shared libraries for"
! 1831: case $host in
! 1832: solaris2.[6789]|solaris2.1[0-9])
! 1833: $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
! 1834: $ECHO "pages."
! 1835: ;;
! 1836: *)
! 1837: $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
! 1838: ;;
! 1839: esac
! 1840: $ECHO "X----------------------------------------------------------------------" | $Xsed
! 1841: exit $EXIT_SUCCESS
! 1842: }
! 1843:
! 1844: test "$mode" = finish && func_mode_finish ${1+"$@"}
! 1845:
! 1846:
! 1847: # func_mode_install arg...
! 1848: func_mode_install ()
! 1849: {
! 1850: $opt_debug
! 1851: # There may be an optional sh(1) argument at the beginning of
! 1852: # install_prog (especially on Windows NT).
! 1853: if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
! 1854: # Allow the use of GNU shtool's install command.
! 1855: $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
! 1856: # Aesthetically quote it.
! 1857: func_quote_for_eval "$nonopt"
! 1858: install_prog="$func_quote_for_eval_result "
! 1859: arg=$1
! 1860: shift
! 1861: else
! 1862: install_prog=
! 1863: arg=$nonopt
! 1864: fi
! 1865:
! 1866: # The real first argument should be the name of the installation program.
! 1867: # Aesthetically quote it.
! 1868: func_quote_for_eval "$arg"
! 1869: install_prog="$install_prog$func_quote_for_eval_result"
! 1870:
! 1871: # We need to accept at least all the BSD install flags.
! 1872: dest=
! 1873: files=
! 1874: opts=
! 1875: prev=
! 1876: install_type=
! 1877: isdir=no
! 1878: stripme=
! 1879: for arg
! 1880: do
! 1881: if test -n "$dest"; then
! 1882: files="$files $dest"
! 1883: dest=$arg
! 1884: continue
! 1885: fi
! 1886:
! 1887: case $arg in
! 1888: -d) isdir=yes ;;
! 1889: -f)
! 1890: case " $install_prog " in
! 1891: *[\\\ /]cp\ *) ;;
! 1892: *) prev=$arg ;;
! 1893: esac
! 1894: ;;
! 1895: -g | -m | -o)
! 1896: prev=$arg
! 1897: ;;
! 1898: -s)
! 1899: stripme=" -s"
! 1900: continue
! 1901: ;;
! 1902: -*)
! 1903: ;;
! 1904: *)
! 1905: # If the previous option needed an argument, then skip it.
! 1906: if test -n "$prev"; then
! 1907: prev=
! 1908: else
! 1909: dest=$arg
! 1910: continue
! 1911: fi
! 1912: ;;
! 1913: esac
! 1914:
! 1915: # Aesthetically quote the argument.
! 1916: func_quote_for_eval "$arg"
! 1917: install_prog="$install_prog $func_quote_for_eval_result"
! 1918: done
! 1919:
! 1920: test -z "$install_prog" && \
! 1921: func_fatal_help "you must specify an install program"
! 1922:
! 1923: test -n "$prev" && \
! 1924: func_fatal_help "the \`$prev' option requires an argument"
! 1925:
! 1926: if test -z "$files"; then
! 1927: if test -z "$dest"; then
! 1928: func_fatal_help "no file or destination specified"
! 1929: else
! 1930: func_fatal_help "you must specify a destination"
! 1931: fi
! 1932: fi
! 1933:
! 1934: # Strip any trailing slash from the destination.
! 1935: func_stripname '' '/' "$dest"
! 1936: dest=$func_stripname_result
! 1937:
! 1938: # Check to see that the destination is a directory.
! 1939: test -d "$dest" && isdir=yes
! 1940: if test "$isdir" = yes; then
! 1941: destdir="$dest"
! 1942: destname=
! 1943: else
! 1944: func_dirname_and_basename "$dest" "" "."
! 1945: destdir="$func_dirname_result"
! 1946: destname="$func_basename_result"
! 1947:
! 1948: # Not a directory, so check to see that there is only one file specified.
! 1949: set dummy $files; shift
! 1950: test "$#" -gt 1 && \
! 1951: func_fatal_help "\`$dest' is not a directory"
! 1952: fi
! 1953: case $destdir in
! 1954: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 1955: *)
! 1956: for file in $files; do
! 1957: case $file in
! 1958: *.lo) ;;
! 1959: *)
! 1960: func_fatal_help "\`$destdir' must be an absolute directory name"
! 1961: ;;
! 1962: esac
! 1963: done
! 1964: ;;
! 1965: esac
! 1966:
! 1967: # This variable tells wrapper scripts just to set variables rather
! 1968: # than running their programs.
! 1969: libtool_install_magic="$magic"
! 1970:
! 1971: staticlibs=
! 1972: future_libdirs=
! 1973: current_libdirs=
! 1974: for file in $files; do
! 1975:
! 1976: # Do each installation.
! 1977: case $file in
! 1978: *.$libext)
! 1979: # Do the static libraries later.
! 1980: staticlibs="$staticlibs $file"
! 1981: ;;
! 1982:
! 1983: *.la)
! 1984: # Check to see that this really is a libtool archive.
! 1985: func_lalib_unsafe_p "$file" \
! 1986: || func_fatal_help "\`$file' is not a valid libtool archive"
! 1987:
! 1988: library_names=
! 1989: old_library=
! 1990: relink_command=
! 1991: func_source "$file"
! 1992:
! 1993: # Add the libdir to current_libdirs if it is the destination.
! 1994: if test "X$destdir" = "X$libdir"; then
! 1995: case "$current_libdirs " in
! 1996: *" $libdir "*) ;;
! 1997: *) current_libdirs="$current_libdirs $libdir" ;;
! 1998: esac
! 1999: else
! 2000: # Note the libdir as a future libdir.
! 2001: case "$future_libdirs " in
! 2002: *" $libdir "*) ;;
! 2003: *) future_libdirs="$future_libdirs $libdir" ;;
! 2004: esac
! 2005: fi
! 2006:
! 2007: func_dirname "$file" "/" ""
! 2008: dir="$func_dirname_result"
! 2009: dir="$dir$objdir"
! 2010:
! 2011: if test -n "$relink_command"; then
! 2012: # Determine the prefix the user has applied to our future dir.
! 2013: inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
! 2014:
! 2015: # Don't allow the user to place us outside of our expected
! 2016: # location b/c this prevents finding dependent libraries that
! 2017: # are installed to the same prefix.
! 2018: # At present, this check doesn't affect windows .dll's that
! 2019: # are installed into $libdir/../bin (currently, that works fine)
! 2020: # but it's something to keep an eye on.
! 2021: test "$inst_prefix_dir" = "$destdir" && \
! 2022: func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
! 2023:
! 2024: if test -n "$inst_prefix_dir"; then
! 2025: # Stick the inst_prefix_dir data into the link command.
! 2026: relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
! 2027: else
! 2028: relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
! 2029: fi
! 2030:
! 2031: func_warning "relinking \`$file'"
! 2032: func_show_eval "$relink_command" \
! 2033: 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
! 2034: fi
! 2035:
! 2036: # See the names of the shared library.
! 2037: set dummy $library_names; shift
! 2038: if test -n "$1"; then
! 2039: realname="$1"
! 2040: shift
! 2041:
! 2042: srcname="$realname"
! 2043: test -n "$relink_command" && srcname="$realname"T
! 2044:
! 2045: # Install the shared library and build the symlinks.
! 2046: func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
! 2047: 'exit $?'
! 2048: tstripme="$stripme"
! 2049: case $host_os in
! 2050: cygwin* | mingw* | pw32* | cegcc*)
! 2051: case $realname in
! 2052: *.dll.a)
! 2053: tstripme=""
! 2054: ;;
! 2055: esac
! 2056: ;;
! 2057: esac
! 2058: if test -n "$tstripme" && test -n "$striplib"; then
! 2059: func_show_eval "$striplib $destdir/$realname" 'exit $?'
! 2060: fi
! 2061:
! 2062: if test "$#" -gt 0; then
! 2063: # Delete the old symlinks, and create new ones.
! 2064: # Try `ln -sf' first, because the `ln' binary might depend on
! 2065: # the symlink we replace! Solaris /bin/ln does not understand -f,
! 2066: # so we also need to try rm && ln -s.
! 2067: for linkname
! 2068: do
! 2069: test "$linkname" != "$realname" \
! 2070: && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
! 2071: done
! 2072: fi
! 2073:
! 2074: # Do each command in the postinstall commands.
! 2075: lib="$destdir/$realname"
! 2076: func_execute_cmds "$postinstall_cmds" 'exit $?'
! 2077: fi
! 2078:
! 2079: # Install the pseudo-library for information purposes.
! 2080: func_basename "$file"
! 2081: name="$func_basename_result"
! 2082: instname="$dir/$name"i
! 2083: func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
! 2084:
! 2085: # Maybe install the static library, too.
! 2086: test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
! 2087: ;;
! 2088:
! 2089: *.lo)
! 2090: # Install (i.e. copy) a libtool object.
! 2091:
! 2092: # Figure out destination file name, if it wasn't already specified.
! 2093: if test -n "$destname"; then
! 2094: destfile="$destdir/$destname"
! 2095: else
! 2096: func_basename "$file"
! 2097: destfile="$func_basename_result"
! 2098: destfile="$destdir/$destfile"
! 2099: fi
! 2100:
! 2101: # Deduce the name of the destination old-style object file.
! 2102: case $destfile in
! 2103: *.lo)
! 2104: func_lo2o "$destfile"
! 2105: staticdest=$func_lo2o_result
! 2106: ;;
! 2107: *.$objext)
! 2108: staticdest="$destfile"
! 2109: destfile=
! 2110: ;;
! 2111: *)
! 2112: func_fatal_help "cannot copy a libtool object to \`$destfile'"
! 2113: ;;
! 2114: esac
! 2115:
! 2116: # Install the libtool object if requested.
! 2117: test -n "$destfile" && \
! 2118: func_show_eval "$install_prog $file $destfile" 'exit $?'
! 2119:
! 2120: # Install the old object if enabled.
! 2121: if test "$build_old_libs" = yes; then
! 2122: # Deduce the name of the old-style object file.
! 2123: func_lo2o "$file"
! 2124: staticobj=$func_lo2o_result
! 2125: func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
! 2126: fi
! 2127: exit $EXIT_SUCCESS
! 2128: ;;
! 2129:
! 2130: *)
! 2131: # Figure out destination file name, if it wasn't already specified.
! 2132: if test -n "$destname"; then
! 2133: destfile="$destdir/$destname"
! 2134: else
! 2135: func_basename "$file"
! 2136: destfile="$func_basename_result"
! 2137: destfile="$destdir/$destfile"
! 2138: fi
! 2139:
! 2140: # If the file is missing, and there is a .exe on the end, strip it
! 2141: # because it is most likely a libtool script we actually want to
! 2142: # install
! 2143: stripped_ext=""
! 2144: case $file in
! 2145: *.exe)
! 2146: if test ! -f "$file"; then
! 2147: func_stripname '' '.exe' "$file"
! 2148: file=$func_stripname_result
! 2149: stripped_ext=".exe"
! 2150: fi
! 2151: ;;
! 2152: esac
! 2153:
! 2154: # Do a test to see if this is really a libtool program.
! 2155: case $host in
! 2156: *cygwin* | *mingw*)
! 2157: if func_ltwrapper_executable_p "$file"; then
! 2158: func_ltwrapper_scriptname "$file"
! 2159: wrapper=$func_ltwrapper_scriptname_result
! 2160: else
! 2161: func_stripname '' '.exe' "$file"
! 2162: wrapper=$func_stripname_result
! 2163: fi
! 2164: ;;
! 2165: *)
! 2166: wrapper=$file
! 2167: ;;
! 2168: esac
! 2169: if func_ltwrapper_script_p "$wrapper"; then
! 2170: notinst_deplibs=
! 2171: relink_command=
! 2172:
! 2173: func_source "$wrapper"
! 2174:
! 2175: # Check the variables that should have been set.
! 2176: test -z "$generated_by_libtool_version" && \
! 2177: func_fatal_error "invalid libtool wrapper script \`$wrapper'"
! 2178:
! 2179: finalize=yes
! 2180: for lib in $notinst_deplibs; do
! 2181: # Check to see that each library is installed.
! 2182: libdir=
! 2183: if test -f "$lib"; then
! 2184: func_source "$lib"
! 2185: fi
! 2186: libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
! 2187: if test -n "$libdir" && test ! -f "$libfile"; then
! 2188: func_warning "\`$lib' has not been installed in \`$libdir'"
! 2189: finalize=no
! 2190: fi
! 2191: done
! 2192:
! 2193: relink_command=
! 2194: func_source "$wrapper"
! 2195:
! 2196: outputname=
! 2197: if test "$fast_install" = no && test -n "$relink_command"; then
! 2198: $opt_dry_run || {
! 2199: if test "$finalize" = yes; then
! 2200: tmpdir=`func_mktempdir`
! 2201: func_basename "$file$stripped_ext"
! 2202: file="$func_basename_result"
! 2203: outputname="$tmpdir/$file"
! 2204: # Replace the output file specification.
! 2205: relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
! 2206:
! 2207: $opt_silent || {
! 2208: func_quote_for_expand "$relink_command"
! 2209: eval "func_echo $func_quote_for_expand_result"
! 2210: }
! 2211: if eval "$relink_command"; then :
! 2212: else
! 2213: func_error "error: relink \`$file' with the above command before installing it"
! 2214: $opt_dry_run || ${RM}r "$tmpdir"
! 2215: continue
! 2216: fi
! 2217: file="$outputname"
! 2218: else
! 2219: func_warning "cannot relink \`$file'"
! 2220: fi
! 2221: }
! 2222: else
! 2223: # Install the binary that we compiled earlier.
! 2224: file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
! 2225: fi
! 2226: fi
! 2227:
! 2228: # remove .exe since cygwin /usr/bin/install will append another
! 2229: # one anyway
! 2230: case $install_prog,$host in
! 2231: */usr/bin/install*,*cygwin*)
! 2232: case $file:$destfile in
! 2233: *.exe:*.exe)
! 2234: # this is ok
! 2235: ;;
! 2236: *.exe:*)
! 2237: destfile=$destfile.exe
! 2238: ;;
! 2239: *:*.exe)
! 2240: func_stripname '' '.exe' "$destfile"
! 2241: destfile=$func_stripname_result
! 2242: ;;
! 2243: esac
! 2244: ;;
! 2245: esac
! 2246: func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
! 2247: $opt_dry_run || if test -n "$outputname"; then
! 2248: ${RM}r "$tmpdir"
! 2249: fi
! 2250: ;;
! 2251: esac
! 2252: done
! 2253:
! 2254: for file in $staticlibs; do
! 2255: func_basename "$file"
! 2256: name="$func_basename_result"
! 2257:
! 2258: # Set up the ranlib parameters.
! 2259: oldlib="$destdir/$name"
! 2260:
! 2261: func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
! 2262:
! 2263: if test -n "$stripme" && test -n "$old_striplib"; then
! 2264: func_show_eval "$old_striplib $oldlib" 'exit $?'
! 2265: fi
! 2266:
! 2267: # Do each command in the postinstall commands.
! 2268: func_execute_cmds "$old_postinstall_cmds" 'exit $?'
! 2269: done
! 2270:
! 2271: test -n "$future_libdirs" && \
! 2272: func_warning "remember to run \`$progname --finish$future_libdirs'"
! 2273:
! 2274: if test -n "$current_libdirs"; then
! 2275: # Maybe just do a dry run.
! 2276: $opt_dry_run && current_libdirs=" -n$current_libdirs"
! 2277: exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
! 2278: else
! 2279: exit $EXIT_SUCCESS
! 2280: fi
! 2281: }
! 2282:
! 2283: test "$mode" = install && func_mode_install ${1+"$@"}
! 2284:
! 2285:
! 2286: # func_generate_dlsyms outputname originator pic_p
! 2287: # Extract symbols from dlprefiles and create ${outputname}S.o with
! 2288: # a dlpreopen symbol table.
! 2289: func_generate_dlsyms ()
! 2290: {
! 2291: $opt_debug
! 2292: my_outputname="$1"
! 2293: my_originator="$2"
! 2294: my_pic_p="${3-no}"
! 2295: my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
! 2296: my_dlsyms=
! 2297:
! 2298: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 2299: if test -n "$NM" && test -n "$global_symbol_pipe"; then
! 2300: my_dlsyms="${my_outputname}S.c"
! 2301: else
! 2302: func_error "not configured to extract global symbols from dlpreopened files"
! 2303: fi
! 2304: fi
! 2305:
! 2306: if test -n "$my_dlsyms"; then
! 2307: case $my_dlsyms in
! 2308: "") ;;
! 2309: *.c)
! 2310: # Discover the nlist of each of the dlfiles.
! 2311: nlist="$output_objdir/${my_outputname}.nm"
! 2312:
! 2313: func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
! 2314:
! 2315: # Parse the name list into a source file.
! 2316: func_verbose "creating $output_objdir/$my_dlsyms"
! 2317:
! 2318: $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
! 2319: /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
! 2320: /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
! 2321:
! 2322: #ifdef __cplusplus
! 2323: extern \"C\" {
! 2324: #endif
! 2325:
! 2326: /* External symbol declarations for the compiler. */\
! 2327: "
! 2328:
! 2329: if test "$dlself" = yes; then
! 2330: func_verbose "generating symbol list for \`$output'"
! 2331:
! 2332: $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
! 2333:
! 2334: # Add our own program objects to the symbol list.
! 2335: progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 2336: for progfile in $progfiles; do
! 2337: func_verbose "extracting global C symbols from \`$progfile'"
! 2338: $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
! 2339: done
! 2340:
! 2341: if test -n "$exclude_expsyms"; then
! 2342: $opt_dry_run || {
! 2343: eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
! 2344: eval '$MV "$nlist"T "$nlist"'
! 2345: }
! 2346: fi
! 2347:
! 2348: if test -n "$export_symbols_regex"; then
! 2349: $opt_dry_run || {
! 2350: eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
! 2351: eval '$MV "$nlist"T "$nlist"'
! 2352: }
! 2353: fi
! 2354:
! 2355: # Prepare the list of exported symbols
! 2356: if test -z "$export_symbols"; then
! 2357: export_symbols="$output_objdir/$outputname.exp"
! 2358: $opt_dry_run || {
! 2359: $RM $export_symbols
! 2360: eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
! 2361: case $host in
! 2362: *cygwin* | *mingw* | *cegcc* )
! 2363: eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
! 2364: eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
! 2365: ;;
! 2366: esac
! 2367: }
! 2368: else
! 2369: $opt_dry_run || {
! 2370: eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
! 2371: eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
! 2372: eval '$MV "$nlist"T "$nlist"'
! 2373: case $host in
! 2374: *cygwin | *mingw* | *cegcc* )
! 2375: eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
! 2376: eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
! 2377: ;;
! 2378: esac
! 2379: }
! 2380: fi
! 2381: fi
! 2382:
! 2383: for dlprefile in $dlprefiles; do
! 2384: func_verbose "extracting global C symbols from \`$dlprefile'"
! 2385: func_basename "$dlprefile"
! 2386: name="$func_basename_result"
! 2387: $opt_dry_run || {
! 2388: eval '$ECHO ": $name " >> "$nlist"'
! 2389: eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
! 2390: }
! 2391: done
! 2392:
! 2393: $opt_dry_run || {
! 2394: # Make sure we have at least an empty file.
! 2395: test -f "$nlist" || : > "$nlist"
! 2396:
! 2397: if test -n "$exclude_expsyms"; then
! 2398: $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
! 2399: $MV "$nlist"T "$nlist"
! 2400: fi
! 2401:
! 2402: # Try sorting and uniquifying the output.
! 2403: if $GREP -v "^: " < "$nlist" |
! 2404: if sort -k 3 </dev/null >/dev/null 2>&1; then
! 2405: sort -k 3
! 2406: else
! 2407: sort +2
! 2408: fi |
! 2409: uniq > "$nlist"S; then
! 2410: :
! 2411: else
! 2412: $GREP -v "^: " < "$nlist" > "$nlist"S
! 2413: fi
! 2414:
! 2415: if test -f "$nlist"S; then
! 2416: eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
! 2417: else
! 2418: $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
! 2419: fi
! 2420:
! 2421: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 2422:
! 2423: /* The mapping between symbol names and symbols. */
! 2424: typedef struct {
! 2425: const char *name;
! 2426: void *address;
! 2427: } lt_dlsymlist;
! 2428: "
! 2429: case $host in
! 2430: *cygwin* | *mingw* | *cegcc* )
! 2431: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 2432: /* DATA imports from DLLs on WIN32 con't be const, because
! 2433: runtime relocations are performed -- see ld's documentation
! 2434: on pseudo-relocs. */"
! 2435: lt_dlsym_const= ;;
! 2436: *osf5*)
! 2437: echo >> "$output_objdir/$my_dlsyms" "\
! 2438: /* This system does not cope well with relocations in const data */"
! 2439: lt_dlsym_const= ;;
! 2440: *)
! 2441: lt_dlsym_const=const ;;
! 2442: esac
! 2443:
! 2444: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 2445: extern $lt_dlsym_const lt_dlsymlist
! 2446: lt_${my_prefix}_LTX_preloaded_symbols[];
! 2447: $lt_dlsym_const lt_dlsymlist
! 2448: lt_${my_prefix}_LTX_preloaded_symbols[] =
! 2449: {\
! 2450: { \"$my_originator\", (void *) 0 },"
! 2451:
! 2452: case $need_lib_prefix in
! 2453: no)
! 2454: eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
! 2455: ;;
! 2456: *)
! 2457: eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
! 2458: ;;
! 2459: esac
! 2460: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 2461: {0, (void *) 0}
! 2462: };
! 2463:
! 2464: /* This works around a problem in FreeBSD linker */
! 2465: #ifdef FREEBSD_WORKAROUND
! 2466: static const void *lt_preloaded_setup() {
! 2467: return lt_${my_prefix}_LTX_preloaded_symbols;
! 2468: }
! 2469: #endif
! 2470:
! 2471: #ifdef __cplusplus
! 2472: }
! 2473: #endif\
! 2474: "
! 2475: } # !$opt_dry_run
! 2476:
! 2477: pic_flag_for_symtable=
! 2478: case "$compile_command " in
! 2479: *" -static "*) ;;
! 2480: *)
! 2481: case $host in
! 2482: # compiling the symbol table file with pic_flag works around
! 2483: # a FreeBSD bug that causes programs to crash when -lm is
! 2484: # linked before any other PIC object. But we must not use
! 2485: # pic_flag when linking with -static. The problem exists in
! 2486: # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
! 2487: *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
! 2488: pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
! 2489: *-*-hpux*)
! 2490: pic_flag_for_symtable=" $pic_flag" ;;
! 2491: *)
! 2492: if test "X$my_pic_p" != Xno; then
! 2493: pic_flag_for_symtable=" $pic_flag"
! 2494: fi
! 2495: ;;
! 2496: esac
! 2497: ;;
! 2498: esac
! 2499: symtab_cflags=
! 2500: for arg in $LTCFLAGS; do
! 2501: case $arg in
! 2502: -pie | -fpie | -fPIE) ;;
! 2503: *) symtab_cflags="$symtab_cflags $arg" ;;
! 2504: esac
! 2505: done
! 2506:
! 2507: # Now compile the dynamic symbol file.
! 2508: func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
! 2509:
! 2510: # Clean up the generated files.
! 2511: func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
! 2512:
! 2513: # Transform the symbol file into the correct name.
! 2514: symfileobj="$output_objdir/${my_outputname}S.$objext"
! 2515: case $host in
! 2516: *cygwin* | *mingw* | *cegcc* )
! 2517: if test -f "$output_objdir/$my_outputname.def"; then
! 2518: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
! 2519: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
! 2520: else
! 2521: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 2522: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 2523: fi
! 2524: ;;
! 2525: *)
! 2526: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 2527: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 2528: ;;
! 2529: esac
! 2530: ;;
! 2531: *)
! 2532: func_fatal_error "unknown suffix for \`$my_dlsyms'"
! 2533: ;;
! 2534: esac
! 2535: else
! 2536: # We keep going just in case the user didn't refer to
! 2537: # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
! 2538: # really was required.
! 2539:
! 2540: # Nullify the symbol file.
! 2541: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
! 2542: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
! 2543: fi
! 2544: }
! 2545:
! 2546: # func_win32_libid arg
! 2547: # return the library type of file 'arg'
! 2548: #
! 2549: # Need a lot of goo to handle *both* DLLs and import libs
! 2550: # Has to be a shell function in order to 'eat' the argument
! 2551: # that is supplied when $file_magic_command is called.
! 2552: func_win32_libid ()
! 2553: {
! 2554: $opt_debug
! 2555: win32_libid_type="unknown"
! 2556: win32_fileres=`file -L $1 2>/dev/null`
! 2557: case $win32_fileres in
! 2558: *ar\ archive\ import\ library*) # definitely import
! 2559: win32_libid_type="x86 archive import"
! 2560: ;;
! 2561: *ar\ archive*) # could be an import, or static
! 2562: if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
! 2563: $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
! 2564: win32_nmres=`eval $NM -f posix -A $1 |
! 2565: $SED -n -e '
! 2566: 1,100{
! 2567: / I /{
! 2568: s,.*,import,
! 2569: p
! 2570: q
! 2571: }
! 2572: }'`
! 2573: case $win32_nmres in
! 2574: import*) win32_libid_type="x86 archive import";;
! 2575: *) win32_libid_type="x86 archive static";;
! 2576: esac
! 2577: fi
! 2578: ;;
! 2579: *DLL*)
! 2580: win32_libid_type="x86 DLL"
! 2581: ;;
! 2582: *executable*) # but shell scripts are "executable" too...
! 2583: case $win32_fileres in
! 2584: *MS\ Windows\ PE\ Intel*)
! 2585: win32_libid_type="x86 DLL"
! 2586: ;;
! 2587: esac
! 2588: ;;
! 2589: esac
! 2590: $ECHO "$win32_libid_type"
! 2591: }
! 2592:
! 2593:
! 2594:
! 2595: # func_extract_an_archive dir oldlib
! 2596: func_extract_an_archive ()
! 2597: {
! 2598: $opt_debug
! 2599: f_ex_an_ar_dir="$1"; shift
! 2600: f_ex_an_ar_oldlib="$1"
! 2601: func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
! 2602: if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
! 2603: :
! 2604: else
! 2605: func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
! 2606: fi
! 2607: }
! 2608:
! 2609:
! 2610: # func_extract_archives gentop oldlib ...
! 2611: func_extract_archives ()
! 2612: {
! 2613: $opt_debug
! 2614: my_gentop="$1"; shift
! 2615: my_oldlibs=${1+"$@"}
! 2616: my_oldobjs=""
! 2617: my_xlib=""
! 2618: my_xabs=""
! 2619: my_xdir=""
! 2620:
! 2621: for my_xlib in $my_oldlibs; do
! 2622: # Extract the objects.
! 2623: case $my_xlib in
! 2624: [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
! 2625: *) my_xabs=`pwd`"/$my_xlib" ;;
! 2626: esac
! 2627: func_basename "$my_xlib"
! 2628: my_xlib="$func_basename_result"
! 2629: my_xlib_u=$my_xlib
! 2630: while :; do
! 2631: case " $extracted_archives " in
! 2632: *" $my_xlib_u "*)
! 2633: func_arith $extracted_serial + 1
! 2634: extracted_serial=$func_arith_result
! 2635: my_xlib_u=lt$extracted_serial-$my_xlib ;;
! 2636: *) break ;;
! 2637: esac
! 2638: done
! 2639: extracted_archives="$extracted_archives $my_xlib_u"
! 2640: my_xdir="$my_gentop/$my_xlib_u"
! 2641:
! 2642: func_mkdir_p "$my_xdir"
! 2643:
! 2644: case $host in
! 2645: *-darwin*)
! 2646: func_verbose "Extracting $my_xabs"
! 2647: # Do not bother doing anything if just a dry run
! 2648: $opt_dry_run || {
! 2649: darwin_orig_dir=`pwd`
! 2650: cd $my_xdir || exit $?
! 2651: darwin_archive=$my_xabs
! 2652: darwin_curdir=`pwd`
! 2653: darwin_base_archive=`basename "$darwin_archive"`
! 2654: darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
! 2655: if test -n "$darwin_arches"; then
! 2656: darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
! 2657: darwin_arch=
! 2658: func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
! 2659: for darwin_arch in $darwin_arches ; do
! 2660: func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
! 2661: $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
! 2662: cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
! 2663: func_extract_an_archive "`pwd`" "${darwin_base_archive}"
! 2664: cd "$darwin_curdir"
! 2665: $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
! 2666: done # $darwin_arches
! 2667: ## Okay now we've a bunch of thin objects, gotta fatten them up :)
! 2668: darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
! 2669: darwin_file=
! 2670: darwin_files=
! 2671: for darwin_file in $darwin_filelist; do
! 2672: darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
! 2673: $LIPO -create -output "$darwin_file" $darwin_files
! 2674: done # $darwin_filelist
! 2675: $RM -rf unfat-$$
! 2676: cd "$darwin_orig_dir"
! 2677: else
! 2678: cd $darwin_orig_dir
! 2679: func_extract_an_archive "$my_xdir" "$my_xabs"
! 2680: fi # $darwin_arches
! 2681: } # !$opt_dry_run
! 2682: ;;
! 2683: *)
! 2684: func_extract_an_archive "$my_xdir" "$my_xabs"
! 2685: ;;
! 2686: esac
! 2687: my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
! 2688: done
! 2689:
! 2690: func_extract_archives_result="$my_oldobjs"
! 2691: }
! 2692:
! 2693:
! 2694:
! 2695: # func_emit_wrapper_part1 [arg=no]
! 2696: #
! 2697: # Emit the first part of a libtool wrapper script on stdout.
! 2698: # For more information, see the description associated with
! 2699: # func_emit_wrapper(), below.
! 2700: func_emit_wrapper_part1 ()
! 2701: {
! 2702: func_emit_wrapper_part1_arg1=no
! 2703: if test -n "$1" ; then
! 2704: func_emit_wrapper_part1_arg1=$1
! 2705: fi
! 2706:
! 2707: $ECHO "\
! 2708: #! $SHELL
! 2709:
! 2710: # $output - temporary wrapper script for $objdir/$outputname
! 2711: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 2712: #
! 2713: # The $output program cannot be directly executed until all the libtool
! 2714: # libraries that it depends on are installed.
! 2715: #
! 2716: # This wrapper script should never be moved out of the build directory.
! 2717: # If it is, it will not operate correctly.
! 2718:
! 2719: # Sed substitution that helps us do robust quoting. It backslashifies
! 2720: # metacharacters that are still active within double-quoted strings.
! 2721: Xsed='${SED} -e 1s/^X//'
! 2722: sed_quote_subst='$sed_quote_subst'
! 2723:
! 2724: # Be Bourne compatible
! 2725: if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
! 2726: emulate sh
! 2727: NULLCMD=:
! 2728: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
! 2729: # is contrary to our usage. Disable this feature.
! 2730: alias -g '\${1+\"\$@\"}'='\"\$@\"'
! 2731: setopt NO_GLOB_SUBST
! 2732: else
! 2733: case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
! 2734: fi
! 2735: BIN_SH=xpg4; export BIN_SH # for Tru64
! 2736: DUALCASE=1; export DUALCASE # for MKS sh
! 2737:
! 2738: # The HP-UX ksh and POSIX shell print the target directory to stdout
! 2739: # if CDPATH is set.
! 2740: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
! 2741:
! 2742: relink_command=\"$relink_command\"
! 2743:
! 2744: # This environment variable determines our operation mode.
! 2745: if test \"\$libtool_install_magic\" = \"$magic\"; then
! 2746: # install mode needs the following variables:
! 2747: generated_by_libtool_version='$macro_version'
! 2748: notinst_deplibs='$notinst_deplibs'
! 2749: else
! 2750: # When we are sourced in execute mode, \$file and \$ECHO are already set.
! 2751: if test \"\$libtool_execute_magic\" != \"$magic\"; then
! 2752: ECHO=\"$qecho\"
! 2753: file=\"\$0\"
! 2754: # Make sure echo works.
! 2755: if test \"X\$1\" = X--no-reexec; then
! 2756: # Discard the --no-reexec flag, and continue.
! 2757: shift
! 2758: elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
! 2759: # Yippee, \$ECHO works!
! 2760: :
! 2761: else
! 2762: # Restart under the correct shell, and then maybe \$ECHO will work.
! 2763: exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
! 2764: fi
! 2765: fi\
! 2766: "
! 2767: $ECHO "\
! 2768:
! 2769: # Find the directory that this script lives in.
! 2770: thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
! 2771: test \"x\$thisdir\" = \"x\$file\" && thisdir=.
! 2772:
! 2773: # Follow symbolic links until we get to the real thisdir.
! 2774: file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
! 2775: while test -n \"\$file\"; do
! 2776: destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
! 2777:
! 2778: # If there was a directory component, then change thisdir.
! 2779: if test \"x\$destdir\" != \"x\$file\"; then
! 2780: case \"\$destdir\" in
! 2781: [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
! 2782: *) thisdir=\"\$thisdir/\$destdir\" ;;
! 2783: esac
! 2784: fi
! 2785:
! 2786: file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
! 2787: file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
! 2788: done
! 2789: "
! 2790: }
! 2791: # end: func_emit_wrapper_part1
! 2792:
! 2793: # func_emit_wrapper_part2 [arg=no]
! 2794: #
! 2795: # Emit the second part of a libtool wrapper script on stdout.
! 2796: # For more information, see the description associated with
! 2797: # func_emit_wrapper(), below.
! 2798: func_emit_wrapper_part2 ()
! 2799: {
! 2800: func_emit_wrapper_part2_arg1=no
! 2801: if test -n "$1" ; then
! 2802: func_emit_wrapper_part2_arg1=$1
! 2803: fi
! 2804:
! 2805: $ECHO "\
! 2806:
! 2807: # Usually 'no', except on cygwin/mingw when embedded into
! 2808: # the cwrapper.
! 2809: WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
! 2810: if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
! 2811: # special case for '.'
! 2812: if test \"\$thisdir\" = \".\"; then
! 2813: thisdir=\`pwd\`
! 2814: fi
! 2815: # remove .libs from thisdir
! 2816: case \"\$thisdir\" in
! 2817: *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
! 2818: $objdir ) thisdir=. ;;
! 2819: esac
! 2820: fi
! 2821:
! 2822: # Try to get the absolute directory name.
! 2823: absdir=\`cd \"\$thisdir\" && pwd\`
! 2824: test -n \"\$absdir\" && thisdir=\"\$absdir\"
! 2825: "
! 2826:
! 2827: if test "$fast_install" = yes; then
! 2828: $ECHO "\
! 2829: program=lt-'$outputname'$exeext
! 2830: progdir=\"\$thisdir/$objdir\"
! 2831:
! 2832: if test ! -f \"\$progdir/\$program\" ||
! 2833: { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
! 2834: test \"X\$file\" != \"X\$progdir/\$program\"; }; then
! 2835:
! 2836: file=\"\$\$-\$program\"
! 2837:
! 2838: if test ! -d \"\$progdir\"; then
! 2839: $MKDIR \"\$progdir\"
! 2840: else
! 2841: $RM \"\$progdir/\$file\"
! 2842: fi"
! 2843:
! 2844: $ECHO "\
! 2845:
! 2846: # relink executable if necessary
! 2847: if test -n \"\$relink_command\"; then
! 2848: if relink_command_output=\`eval \$relink_command 2>&1\`; then :
! 2849: else
! 2850: $ECHO \"\$relink_command_output\" >&2
! 2851: $RM \"\$progdir/\$file\"
! 2852: exit 1
! 2853: fi
! 2854: fi
! 2855:
! 2856: $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
! 2857: { $RM \"\$progdir/\$program\";
! 2858: $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
! 2859: $RM \"\$progdir/\$file\"
! 2860: fi"
! 2861: else
! 2862: $ECHO "\
! 2863: program='$outputname'
! 2864: progdir=\"\$thisdir/$objdir\"
! 2865: "
! 2866: fi
! 2867:
! 2868: $ECHO "\
! 2869:
! 2870: if test -f \"\$progdir/\$program\"; then"
! 2871:
! 2872: # Export our shlibpath_var if we have one.
! 2873: if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
! 2874: $ECHO "\
! 2875: # Add our own library path to $shlibpath_var
! 2876: $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
! 2877:
! 2878: # Some systems cannot cope with colon-terminated $shlibpath_var
! 2879: # The second colon is a workaround for a bug in BeOS R4 sed
! 2880: $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
! 2881:
! 2882: export $shlibpath_var
! 2883: "
! 2884: fi
! 2885:
! 2886: # fixup the dll searchpath if we need to.
! 2887: if test -n "$dllsearchpath"; then
! 2888: $ECHO "\
! 2889: # Add the dll search path components to the executable PATH
! 2890: PATH=$dllsearchpath:\$PATH
! 2891: "
! 2892: fi
! 2893:
! 2894: $ECHO "\
! 2895: if test \"\$libtool_execute_magic\" != \"$magic\"; then
! 2896: # Run the actual program with our arguments.
! 2897: "
! 2898: case $host in
! 2899: # Backslashes separate directories on plain windows
! 2900: *-*-mingw | *-*-os2* | *-cegcc*)
! 2901: $ECHO "\
! 2902: exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
! 2903: "
! 2904: ;;
! 2905:
! 2906: *)
! 2907: $ECHO "\
! 2908: exec \"\$progdir/\$program\" \${1+\"\$@\"}
! 2909: "
! 2910: ;;
! 2911: esac
! 2912: $ECHO "\
! 2913: \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
! 2914: exit 1
! 2915: fi
! 2916: else
! 2917: # The program doesn't exist.
! 2918: \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
! 2919: \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
! 2920: $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
! 2921: exit 1
! 2922: fi
! 2923: fi\
! 2924: "
! 2925: }
! 2926: # end: func_emit_wrapper_part2
! 2927:
! 2928:
! 2929: # func_emit_wrapper [arg=no]
! 2930: #
! 2931: # Emit a libtool wrapper script on stdout.
! 2932: # Don't directly open a file because we may want to
! 2933: # incorporate the script contents within a cygwin/mingw
! 2934: # wrapper executable. Must ONLY be called from within
! 2935: # func_mode_link because it depends on a number of variables
! 2936: # set therein.
! 2937: #
! 2938: # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
! 2939: # variable will take. If 'yes', then the emitted script
! 2940: # will assume that the directory in which it is stored is
! 2941: # the $objdir directory. This is a cygwin/mingw-specific
! 2942: # behavior.
! 2943: func_emit_wrapper ()
! 2944: {
! 2945: func_emit_wrapper_arg1=no
! 2946: if test -n "$1" ; then
! 2947: func_emit_wrapper_arg1=$1
! 2948: fi
! 2949:
! 2950: # split this up so that func_emit_cwrapperexe_src
! 2951: # can call each part independently.
! 2952: func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
! 2953: func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
! 2954: }
! 2955:
! 2956:
! 2957: # func_to_host_path arg
! 2958: #
! 2959: # Convert paths to host format when used with build tools.
! 2960: # Intended for use with "native" mingw (where libtool itself
! 2961: # is running under the msys shell), or in the following cross-
! 2962: # build environments:
! 2963: # $build $host
! 2964: # mingw (msys) mingw [e.g. native]
! 2965: # cygwin mingw
! 2966: # *nix + wine mingw
! 2967: # where wine is equipped with the `winepath' executable.
! 2968: # In the native mingw case, the (msys) shell automatically
! 2969: # converts paths for any non-msys applications it launches,
! 2970: # but that facility isn't available from inside the cwrapper.
! 2971: # Similar accommodations are necessary for $host mingw and
! 2972: # $build cygwin. Calling this function does no harm for other
! 2973: # $host/$build combinations not listed above.
! 2974: #
! 2975: # ARG is the path (on $build) that should be converted to
! 2976: # the proper representation for $host. The result is stored
! 2977: # in $func_to_host_path_result.
! 2978: func_to_host_path ()
! 2979: {
! 2980: func_to_host_path_result="$1"
! 2981: if test -n "$1" ; then
! 2982: case $host in
! 2983: *mingw* )
! 2984: lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
! 2985: case $build in
! 2986: *mingw* ) # actually, msys
! 2987: # awkward: cmd appends spaces to result
! 2988: lt_sed_strip_trailing_spaces="s/[ ]*\$//"
! 2989: func_to_host_path_tmp1=`( cmd //c echo "$1" |\
! 2990: $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
! 2991: func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
! 2992: $SED -e "$lt_sed_naive_backslashify"`
! 2993: ;;
! 2994: *cygwin* )
! 2995: func_to_host_path_tmp1=`cygpath -w "$1"`
! 2996: func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
! 2997: $SED -e "$lt_sed_naive_backslashify"`
! 2998: ;;
! 2999: * )
! 3000: # Unfortunately, winepath does not exit with a non-zero
! 3001: # error code, so we are forced to check the contents of
! 3002: # stdout. On the other hand, if the command is not
! 3003: # found, the shell will set an exit code of 127 and print
! 3004: # *an error message* to stdout. So we must check for both
! 3005: # error code of zero AND non-empty stdout, which explains
! 3006: # the odd construction:
! 3007: func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
! 3008: if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
! 3009: func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
! 3010: $SED -e "$lt_sed_naive_backslashify"`
! 3011: else
! 3012: # Allow warning below.
! 3013: func_to_host_path_result=""
! 3014: fi
! 3015: ;;
! 3016: esac
! 3017: if test -z "$func_to_host_path_result" ; then
! 3018: func_error "Could not determine host path corresponding to"
! 3019: func_error " '$1'"
! 3020: func_error "Continuing, but uninstalled executables may not work."
! 3021: # Fallback:
! 3022: func_to_host_path_result="$1"
! 3023: fi
! 3024: ;;
! 3025: esac
! 3026: fi
! 3027: }
! 3028: # end: func_to_host_path
! 3029:
! 3030: # func_to_host_pathlist arg
! 3031: #
! 3032: # Convert pathlists to host format when used with build tools.
! 3033: # See func_to_host_path(), above. This function supports the
! 3034: # following $build/$host combinations (but does no harm for
! 3035: # combinations not listed here):
! 3036: # $build $host
! 3037: # mingw (msys) mingw [e.g. native]
! 3038: # cygwin mingw
! 3039: # *nix + wine mingw
! 3040: #
! 3041: # Path separators are also converted from $build format to
! 3042: # $host format. If ARG begins or ends with a path separator
! 3043: # character, it is preserved (but converted to $host format)
! 3044: # on output.
! 3045: #
! 3046: # ARG is a pathlist (on $build) that should be converted to
! 3047: # the proper representation on $host. The result is stored
! 3048: # in $func_to_host_pathlist_result.
! 3049: func_to_host_pathlist ()
! 3050: {
! 3051: func_to_host_pathlist_result="$1"
! 3052: if test -n "$1" ; then
! 3053: case $host in
! 3054: *mingw* )
! 3055: lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
! 3056: # Remove leading and trailing path separator characters from
! 3057: # ARG. msys behavior is inconsistent here, cygpath turns them
! 3058: # into '.;' and ';.', and winepath ignores them completely.
! 3059: func_to_host_pathlist_tmp2="$1"
! 3060: # Once set for this call, this variable should not be
! 3061: # reassigned. It is used in tha fallback case.
! 3062: func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
! 3063: $SED -e 's|^:*||' -e 's|:*$||'`
! 3064: case $build in
! 3065: *mingw* ) # Actually, msys.
! 3066: # Awkward: cmd appends spaces to result.
! 3067: lt_sed_strip_trailing_spaces="s/[ ]*\$//"
! 3068: func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
! 3069: $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
! 3070: func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
! 3071: $SED -e "$lt_sed_naive_backslashify"`
! 3072: ;;
! 3073: *cygwin* )
! 3074: func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
! 3075: func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
! 3076: $SED -e "$lt_sed_naive_backslashify"`
! 3077: ;;
! 3078: * )
! 3079: # unfortunately, winepath doesn't convert pathlists
! 3080: func_to_host_pathlist_result=""
! 3081: func_to_host_pathlist_oldIFS=$IFS
! 3082: IFS=:
! 3083: for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
! 3084: IFS=$func_to_host_pathlist_oldIFS
! 3085: if test -n "$func_to_host_pathlist_f" ; then
! 3086: func_to_host_path "$func_to_host_pathlist_f"
! 3087: if test -n "$func_to_host_path_result" ; then
! 3088: if test -z "$func_to_host_pathlist_result" ; then
! 3089: func_to_host_pathlist_result="$func_to_host_path_result"
! 3090: else
! 3091: func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
! 3092: fi
! 3093: fi
! 3094: fi
! 3095: IFS=:
! 3096: done
! 3097: IFS=$func_to_host_pathlist_oldIFS
! 3098: ;;
! 3099: esac
! 3100: if test -z "$func_to_host_pathlist_result" ; then
! 3101: func_error "Could not determine the host path(s) corresponding to"
! 3102: func_error " '$1'"
! 3103: func_error "Continuing, but uninstalled executables may not work."
! 3104: # Fallback. This may break if $1 contains DOS-style drive
! 3105: # specifications. The fix is not to complicate the expression
! 3106: # below, but for the user to provide a working wine installation
! 3107: # with winepath so that path translation in the cross-to-mingw
! 3108: # case works properly.
! 3109: lt_replace_pathsep_nix_to_dos="s|:|;|g"
! 3110: func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
! 3111: $SED -e "$lt_replace_pathsep_nix_to_dos"`
! 3112: fi
! 3113: # Now, add the leading and trailing path separators back
! 3114: case "$1" in
! 3115: :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
! 3116: ;;
! 3117: esac
! 3118: case "$1" in
! 3119: *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
! 3120: ;;
! 3121: esac
! 3122: ;;
! 3123: esac
! 3124: fi
! 3125: }
! 3126: # end: func_to_host_pathlist
! 3127:
! 3128: # func_emit_cwrapperexe_src
! 3129: # emit the source code for a wrapper executable on stdout
! 3130: # Must ONLY be called from within func_mode_link because
! 3131: # it depends on a number of variable set therein.
! 3132: func_emit_cwrapperexe_src ()
! 3133: {
! 3134: cat <<EOF
! 3135:
! 3136: /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
! 3137: Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 3138:
! 3139: The $output program cannot be directly executed until all the libtool
! 3140: libraries that it depends on are installed.
! 3141:
! 3142: This wrapper executable should never be moved out of the build directory.
! 3143: If it is, it will not operate correctly.
! 3144:
! 3145: Currently, it simply execs the wrapper *script* "$SHELL $output",
! 3146: but could eventually absorb all of the scripts functionality and
! 3147: exec $objdir/$outputname directly.
! 3148: */
! 3149: EOF
! 3150: cat <<"EOF"
! 3151: #include <stdio.h>
! 3152: #include <stdlib.h>
! 3153: #ifdef _MSC_VER
! 3154: # include <direct.h>
! 3155: # include <process.h>
! 3156: # include <io.h>
! 3157: # define setmode _setmode
! 3158: #else
! 3159: # include <unistd.h>
! 3160: # include <stdint.h>
! 3161: # ifdef __CYGWIN__
! 3162: # include <io.h>
! 3163: # define HAVE_SETENV
! 3164: # ifdef __STRICT_ANSI__
! 3165: char *realpath (const char *, char *);
! 3166: int putenv (char *);
! 3167: int setenv (const char *, const char *, int);
! 3168: # endif
! 3169: # endif
! 3170: #endif
! 3171: #include <malloc.h>
! 3172: #include <stdarg.h>
! 3173: #include <assert.h>
! 3174: #include <string.h>
! 3175: #include <ctype.h>
! 3176: #include <errno.h>
! 3177: #include <fcntl.h>
! 3178: #include <sys/stat.h>
! 3179:
! 3180: #if defined(PATH_MAX)
! 3181: # define LT_PATHMAX PATH_MAX
! 3182: #elif defined(MAXPATHLEN)
! 3183: # define LT_PATHMAX MAXPATHLEN
! 3184: #else
! 3185: # define LT_PATHMAX 1024
! 3186: #endif
! 3187:
! 3188: #ifndef S_IXOTH
! 3189: # define S_IXOTH 0
! 3190: #endif
! 3191: #ifndef S_IXGRP
! 3192: # define S_IXGRP 0
! 3193: #endif
! 3194:
! 3195: #ifdef _MSC_VER
! 3196: # define S_IXUSR _S_IEXEC
! 3197: # define stat _stat
! 3198: # ifndef _INTPTR_T_DEFINED
! 3199: # define intptr_t int
! 3200: # endif
! 3201: #endif
! 3202:
! 3203: #ifndef DIR_SEPARATOR
! 3204: # define DIR_SEPARATOR '/'
! 3205: # define PATH_SEPARATOR ':'
! 3206: #endif
! 3207:
! 3208: #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
! 3209: defined (__OS2__)
! 3210: # define HAVE_DOS_BASED_FILE_SYSTEM
! 3211: # define FOPEN_WB "wb"
! 3212: # ifndef DIR_SEPARATOR_2
! 3213: # define DIR_SEPARATOR_2 '\\'
! 3214: # endif
! 3215: # ifndef PATH_SEPARATOR_2
! 3216: # define PATH_SEPARATOR_2 ';'
! 3217: # endif
! 3218: #endif
! 3219:
! 3220: #ifndef DIR_SEPARATOR_2
! 3221: # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
! 3222: #else /* DIR_SEPARATOR_2 */
! 3223: # define IS_DIR_SEPARATOR(ch) \
! 3224: (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
! 3225: #endif /* DIR_SEPARATOR_2 */
! 3226:
! 3227: #ifndef PATH_SEPARATOR_2
! 3228: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
! 3229: #else /* PATH_SEPARATOR_2 */
! 3230: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
! 3231: #endif /* PATH_SEPARATOR_2 */
! 3232:
! 3233: #ifdef __CYGWIN__
! 3234: # define FOPEN_WB "wb"
! 3235: #endif
! 3236:
! 3237: #ifndef FOPEN_WB
! 3238: # define FOPEN_WB "w"
! 3239: #endif
! 3240: #ifndef _O_BINARY
! 3241: # define _O_BINARY 0
! 3242: #endif
! 3243:
! 3244: #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
! 3245: #define XFREE(stale) do { \
! 3246: if (stale) { free ((void *) stale); stale = 0; } \
! 3247: } while (0)
! 3248:
! 3249: #undef LTWRAPPER_DEBUGPRINTF
! 3250: #if defined DEBUGWRAPPER
! 3251: # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
! 3252: static void
! 3253: ltwrapper_debugprintf (const char *fmt, ...)
! 3254: {
! 3255: va_list args;
! 3256: va_start (args, fmt);
! 3257: (void) vfprintf (stderr, fmt, args);
! 3258: va_end (args);
! 3259: }
! 3260: #else
! 3261: # define LTWRAPPER_DEBUGPRINTF(args)
! 3262: #endif
! 3263:
! 3264: const char *program_name = NULL;
! 3265:
! 3266: void *xmalloc (size_t num);
! 3267: char *xstrdup (const char *string);
! 3268: const char *base_name (const char *name);
! 3269: char *find_executable (const char *wrapper);
! 3270: char *chase_symlinks (const char *pathspec);
! 3271: int make_executable (const char *path);
! 3272: int check_executable (const char *path);
! 3273: char *strendzap (char *str, const char *pat);
! 3274: void lt_fatal (const char *message, ...);
! 3275: void lt_setenv (const char *name, const char *value);
! 3276: char *lt_extend_str (const char *orig_value, const char *add, int to_end);
! 3277: void lt_opt_process_env_set (const char *arg);
! 3278: void lt_opt_process_env_prepend (const char *arg);
! 3279: void lt_opt_process_env_append (const char *arg);
! 3280: int lt_split_name_value (const char *arg, char** name, char** value);
! 3281: void lt_update_exe_path (const char *name, const char *value);
! 3282: void lt_update_lib_path (const char *name, const char *value);
! 3283:
! 3284: static const char *script_text_part1 =
! 3285: EOF
! 3286:
! 3287: func_emit_wrapper_part1 yes |
! 3288: $SED -e 's/\([\\"]\)/\\\1/g' \
! 3289: -e 's/^/ "/' -e 's/$/\\n"/'
! 3290: echo ";"
! 3291: cat <<EOF
! 3292:
! 3293: static const char *script_text_part2 =
! 3294: EOF
! 3295: func_emit_wrapper_part2 yes |
! 3296: $SED -e 's/\([\\"]\)/\\\1/g' \
! 3297: -e 's/^/ "/' -e 's/$/\\n"/'
! 3298: echo ";"
! 3299:
! 3300: cat <<EOF
! 3301: const char * MAGIC_EXE = "$magic_exe";
! 3302: const char * LIB_PATH_VARNAME = "$shlibpath_var";
! 3303: EOF
! 3304:
! 3305: if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
! 3306: func_to_host_pathlist "$temp_rpath"
! 3307: cat <<EOF
! 3308: const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
! 3309: EOF
! 3310: else
! 3311: cat <<"EOF"
! 3312: const char * LIB_PATH_VALUE = "";
! 3313: EOF
! 3314: fi
! 3315:
! 3316: if test -n "$dllsearchpath"; then
! 3317: func_to_host_pathlist "$dllsearchpath:"
! 3318: cat <<EOF
! 3319: const char * EXE_PATH_VARNAME = "PATH";
! 3320: const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
! 3321: EOF
! 3322: else
! 3323: cat <<"EOF"
! 3324: const char * EXE_PATH_VARNAME = "";
! 3325: const char * EXE_PATH_VALUE = "";
! 3326: EOF
! 3327: fi
! 3328:
! 3329: if test "$fast_install" = yes; then
! 3330: cat <<EOF
! 3331: const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
! 3332: EOF
! 3333: else
! 3334: cat <<EOF
! 3335: const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
! 3336: EOF
! 3337: fi
! 3338:
! 3339:
! 3340: cat <<"EOF"
! 3341:
! 3342: #define LTWRAPPER_OPTION_PREFIX "--lt-"
! 3343: #define LTWRAPPER_OPTION_PREFIX_LENGTH 5
! 3344:
! 3345: static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
! 3346: static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
! 3347:
! 3348: static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
! 3349:
! 3350: static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
! 3351: static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set";
! 3352: /* argument is putenv-style "foo=bar", value of foo is set to bar */
! 3353:
! 3354: static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
! 3355: static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend";
! 3356: /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
! 3357:
! 3358: static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
! 3359: static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append";
! 3360: /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
! 3361:
! 3362: int
! 3363: main (int argc, char *argv[])
! 3364: {
! 3365: char **newargz;
! 3366: int newargc;
! 3367: char *tmp_pathspec;
! 3368: char *actual_cwrapper_path;
! 3369: char *actual_cwrapper_name;
! 3370: char *target_name;
! 3371: char *lt_argv_zero;
! 3372: intptr_t rval = 127;
! 3373:
! 3374: int i;
! 3375:
! 3376: program_name = (char *) xstrdup (base_name (argv[0]));
! 3377: LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
! 3378: LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
! 3379:
! 3380: /* very simple arg parsing; don't want to rely on getopt */
! 3381: for (i = 1; i < argc; i++)
! 3382: {
! 3383: if (strcmp (argv[i], dumpscript_opt) == 0)
! 3384: {
! 3385: EOF
! 3386: case "$host" in
! 3387: *mingw* | *cygwin* )
! 3388: # make stdout use "unix" line endings
! 3389: echo " setmode(1,_O_BINARY);"
! 3390: ;;
! 3391: esac
! 3392:
! 3393: cat <<"EOF"
! 3394: printf ("%s", script_text_part1);
! 3395: printf ("%s", script_text_part2);
! 3396: return 0;
! 3397: }
! 3398: }
! 3399:
! 3400: newargz = XMALLOC (char *, argc + 1);
! 3401: tmp_pathspec = find_executable (argv[0]);
! 3402: if (tmp_pathspec == NULL)
! 3403: lt_fatal ("Couldn't find %s", argv[0]);
! 3404: LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
! 3405: tmp_pathspec));
! 3406:
! 3407: actual_cwrapper_path = chase_symlinks (tmp_pathspec);
! 3408: LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
! 3409: actual_cwrapper_path));
! 3410: XFREE (tmp_pathspec);
! 3411:
! 3412: actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
! 3413: strendzap (actual_cwrapper_path, actual_cwrapper_name);
! 3414:
! 3415: /* wrapper name transforms */
! 3416: strendzap (actual_cwrapper_name, ".exe");
! 3417: tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
! 3418: XFREE (actual_cwrapper_name);
! 3419: actual_cwrapper_name = tmp_pathspec;
! 3420: tmp_pathspec = 0;
! 3421:
! 3422: /* target_name transforms -- use actual target program name; might have lt- prefix */
! 3423: target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
! 3424: strendzap (target_name, ".exe");
! 3425: tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
! 3426: XFREE (target_name);
! 3427: target_name = tmp_pathspec;
! 3428: tmp_pathspec = 0;
! 3429:
! 3430: LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
! 3431: target_name));
! 3432: EOF
! 3433:
! 3434: cat <<EOF
! 3435: newargz[0] =
! 3436: XMALLOC (char, (strlen (actual_cwrapper_path) +
! 3437: strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
! 3438: strcpy (newargz[0], actual_cwrapper_path);
! 3439: strcat (newargz[0], "$objdir");
! 3440: strcat (newargz[0], "/");
! 3441: EOF
! 3442:
! 3443: cat <<"EOF"
! 3444: /* stop here, and copy so we don't have to do this twice */
! 3445: tmp_pathspec = xstrdup (newargz[0]);
! 3446:
! 3447: /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
! 3448: strcat (newargz[0], actual_cwrapper_name);
! 3449:
! 3450: /* DO want the lt- prefix here if it exists, so use target_name */
! 3451: lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
! 3452: XFREE (tmp_pathspec);
! 3453: tmp_pathspec = NULL;
! 3454: EOF
! 3455:
! 3456: case $host_os in
! 3457: mingw*)
! 3458: cat <<"EOF"
! 3459: {
! 3460: char* p;
! 3461: while ((p = strchr (newargz[0], '\\')) != NULL)
! 3462: {
! 3463: *p = '/';
! 3464: }
! 3465: while ((p = strchr (lt_argv_zero, '\\')) != NULL)
! 3466: {
! 3467: *p = '/';
! 3468: }
! 3469: }
! 3470: EOF
! 3471: ;;
! 3472: esac
! 3473:
! 3474: cat <<"EOF"
! 3475: XFREE (target_name);
! 3476: XFREE (actual_cwrapper_path);
! 3477: XFREE (actual_cwrapper_name);
! 3478:
! 3479: lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
! 3480: lt_setenv ("DUALCASE", "1"); /* for MSK sh */
! 3481: lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
! 3482: lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
! 3483:
! 3484: newargc=0;
! 3485: for (i = 1; i < argc; i++)
! 3486: {
! 3487: if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
! 3488: {
! 3489: if (argv[i][env_set_opt_len] == '=')
! 3490: {
! 3491: const char *p = argv[i] + env_set_opt_len + 1;
! 3492: lt_opt_process_env_set (p);
! 3493: }
! 3494: else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
! 3495: {
! 3496: lt_opt_process_env_set (argv[++i]); /* don't copy */
! 3497: }
! 3498: else
! 3499: lt_fatal ("%s missing required argument", env_set_opt);
! 3500: continue;
! 3501: }
! 3502: if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
! 3503: {
! 3504: if (argv[i][env_prepend_opt_len] == '=')
! 3505: {
! 3506: const char *p = argv[i] + env_prepend_opt_len + 1;
! 3507: lt_opt_process_env_prepend (p);
! 3508: }
! 3509: else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
! 3510: {
! 3511: lt_opt_process_env_prepend (argv[++i]); /* don't copy */
! 3512: }
! 3513: else
! 3514: lt_fatal ("%s missing required argument", env_prepend_opt);
! 3515: continue;
! 3516: }
! 3517: if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
! 3518: {
! 3519: if (argv[i][env_append_opt_len] == '=')
! 3520: {
! 3521: const char *p = argv[i] + env_append_opt_len + 1;
! 3522: lt_opt_process_env_append (p);
! 3523: }
! 3524: else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
! 3525: {
! 3526: lt_opt_process_env_append (argv[++i]); /* don't copy */
! 3527: }
! 3528: else
! 3529: lt_fatal ("%s missing required argument", env_append_opt);
! 3530: continue;
! 3531: }
! 3532: if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
! 3533: {
! 3534: /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
! 3535: namespace, but it is not one of the ones we know about and
! 3536: have already dealt with, above (inluding dump-script), then
! 3537: report an error. Otherwise, targets might begin to believe
! 3538: they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
! 3539: namespace. The first time any user complains about this, we'll
! 3540: need to make LTWRAPPER_OPTION_PREFIX a configure-time option
! 3541: or a configure.ac-settable value.
! 3542: */
! 3543: lt_fatal ("Unrecognized option in %s namespace: '%s'",
! 3544: ltwrapper_option_prefix, argv[i]);
! 3545: }
! 3546: /* otherwise ... */
! 3547: newargz[++newargc] = xstrdup (argv[i]);
! 3548: }
! 3549: newargz[++newargc] = NULL;
! 3550:
! 3551: LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
! 3552: for (i = 0; i < newargc; i++)
! 3553: {
! 3554: LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
! 3555: }
! 3556:
! 3557: EOF
! 3558:
! 3559: case $host_os in
! 3560: mingw*)
! 3561: cat <<"EOF"
! 3562: /* execv doesn't actually work on mingw as expected on unix */
! 3563: rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
! 3564: if (rval == -1)
! 3565: {
! 3566: /* failed to start process */
! 3567: LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
! 3568: return 127;
! 3569: }
! 3570: return rval;
! 3571: EOF
! 3572: ;;
! 3573: *)
! 3574: cat <<"EOF"
! 3575: execv (lt_argv_zero, newargz);
! 3576: return rval; /* =127, but avoids unused variable warning */
! 3577: EOF
! 3578: ;;
! 3579: esac
! 3580:
! 3581: cat <<"EOF"
! 3582: }
! 3583:
! 3584: void *
! 3585: xmalloc (size_t num)
! 3586: {
! 3587: void *p = (void *) malloc (num);
! 3588: if (!p)
! 3589: lt_fatal ("Memory exhausted");
! 3590:
! 3591: return p;
! 3592: }
! 3593:
! 3594: char *
! 3595: xstrdup (const char *string)
! 3596: {
! 3597: return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
! 3598: string) : NULL;
! 3599: }
! 3600:
! 3601: const char *
! 3602: base_name (const char *name)
! 3603: {
! 3604: const char *base;
! 3605:
! 3606: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 3607: /* Skip over the disk name in MSDOS pathnames. */
! 3608: if (isalpha ((unsigned char) name[0]) && name[1] == ':')
! 3609: name += 2;
! 3610: #endif
! 3611:
! 3612: for (base = name; *name; name++)
! 3613: if (IS_DIR_SEPARATOR (*name))
! 3614: base = name + 1;
! 3615: return base;
! 3616: }
! 3617:
! 3618: int
! 3619: check_executable (const char *path)
! 3620: {
! 3621: struct stat st;
! 3622:
! 3623: LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
! 3624: path ? (*path ? path : "EMPTY!") : "NULL!"));
! 3625: if ((!path) || (!*path))
! 3626: return 0;
! 3627:
! 3628: if ((stat (path, &st) >= 0)
! 3629: && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
! 3630: return 1;
! 3631: else
! 3632: return 0;
! 3633: }
! 3634:
! 3635: int
! 3636: make_executable (const char *path)
! 3637: {
! 3638: int rval = 0;
! 3639: struct stat st;
! 3640:
! 3641: LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
! 3642: path ? (*path ? path : "EMPTY!") : "NULL!"));
! 3643: if ((!path) || (!*path))
! 3644: return 0;
! 3645:
! 3646: if (stat (path, &st) >= 0)
! 3647: {
! 3648: rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
! 3649: }
! 3650: return rval;
! 3651: }
! 3652:
! 3653: /* Searches for the full path of the wrapper. Returns
! 3654: newly allocated full path name if found, NULL otherwise
! 3655: Does not chase symlinks, even on platforms that support them.
! 3656: */
! 3657: char *
! 3658: find_executable (const char *wrapper)
! 3659: {
! 3660: int has_slash = 0;
! 3661: const char *p;
! 3662: const char *p_next;
! 3663: /* static buffer for getcwd */
! 3664: char tmp[LT_PATHMAX + 1];
! 3665: int tmp_len;
! 3666: char *concat_name;
! 3667:
! 3668: LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
! 3669: wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
! 3670:
! 3671: if ((wrapper == NULL) || (*wrapper == '\0'))
! 3672: return NULL;
! 3673:
! 3674: /* Absolute path? */
! 3675: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 3676: if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
! 3677: {
! 3678: concat_name = xstrdup (wrapper);
! 3679: if (check_executable (concat_name))
! 3680: return concat_name;
! 3681: XFREE (concat_name);
! 3682: }
! 3683: else
! 3684: {
! 3685: #endif
! 3686: if (IS_DIR_SEPARATOR (wrapper[0]))
! 3687: {
! 3688: concat_name = xstrdup (wrapper);
! 3689: if (check_executable (concat_name))
! 3690: return concat_name;
! 3691: XFREE (concat_name);
! 3692: }
! 3693: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 3694: }
! 3695: #endif
! 3696:
! 3697: for (p = wrapper; *p; p++)
! 3698: if (*p == '/')
! 3699: {
! 3700: has_slash = 1;
! 3701: break;
! 3702: }
! 3703: if (!has_slash)
! 3704: {
! 3705: /* no slashes; search PATH */
! 3706: const char *path = getenv ("PATH");
! 3707: if (path != NULL)
! 3708: {
! 3709: for (p = path; *p; p = p_next)
! 3710: {
! 3711: const char *q;
! 3712: size_t p_len;
! 3713: for (q = p; *q; q++)
! 3714: if (IS_PATH_SEPARATOR (*q))
! 3715: break;
! 3716: p_len = q - p;
! 3717: p_next = (*q == '\0' ? q : q + 1);
! 3718: if (p_len == 0)
! 3719: {
! 3720: /* empty path: current directory */
! 3721: if (getcwd (tmp, LT_PATHMAX) == NULL)
! 3722: lt_fatal ("getcwd failed");
! 3723: tmp_len = strlen (tmp);
! 3724: concat_name =
! 3725: XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
! 3726: memcpy (concat_name, tmp, tmp_len);
! 3727: concat_name[tmp_len] = '/';
! 3728: strcpy (concat_name + tmp_len + 1, wrapper);
! 3729: }
! 3730: else
! 3731: {
! 3732: concat_name =
! 3733: XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
! 3734: memcpy (concat_name, p, p_len);
! 3735: concat_name[p_len] = '/';
! 3736: strcpy (concat_name + p_len + 1, wrapper);
! 3737: }
! 3738: if (check_executable (concat_name))
! 3739: return concat_name;
! 3740: XFREE (concat_name);
! 3741: }
! 3742: }
! 3743: /* not found in PATH; assume curdir */
! 3744: }
! 3745: /* Relative path | not found in path: prepend cwd */
! 3746: if (getcwd (tmp, LT_PATHMAX) == NULL)
! 3747: lt_fatal ("getcwd failed");
! 3748: tmp_len = strlen (tmp);
! 3749: concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
! 3750: memcpy (concat_name, tmp, tmp_len);
! 3751: concat_name[tmp_len] = '/';
! 3752: strcpy (concat_name + tmp_len + 1, wrapper);
! 3753:
! 3754: if (check_executable (concat_name))
! 3755: return concat_name;
! 3756: XFREE (concat_name);
! 3757: return NULL;
! 3758: }
! 3759:
! 3760: char *
! 3761: chase_symlinks (const char *pathspec)
! 3762: {
! 3763: #ifndef S_ISLNK
! 3764: return xstrdup (pathspec);
! 3765: #else
! 3766: char buf[LT_PATHMAX];
! 3767: struct stat s;
! 3768: char *tmp_pathspec = xstrdup (pathspec);
! 3769: char *p;
! 3770: int has_symlinks = 0;
! 3771: while (strlen (tmp_pathspec) && !has_symlinks)
! 3772: {
! 3773: LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
! 3774: tmp_pathspec));
! 3775: if (lstat (tmp_pathspec, &s) == 0)
! 3776: {
! 3777: if (S_ISLNK (s.st_mode) != 0)
! 3778: {
! 3779: has_symlinks = 1;
! 3780: break;
! 3781: }
! 3782:
! 3783: /* search backwards for last DIR_SEPARATOR */
! 3784: p = tmp_pathspec + strlen (tmp_pathspec) - 1;
! 3785: while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
! 3786: p--;
! 3787: if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
! 3788: {
! 3789: /* no more DIR_SEPARATORS left */
! 3790: break;
! 3791: }
! 3792: *p = '\0';
! 3793: }
! 3794: else
! 3795: {
! 3796: char *errstr = strerror (errno);
! 3797: lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
! 3798: }
! 3799: }
! 3800: XFREE (tmp_pathspec);
! 3801:
! 3802: if (!has_symlinks)
! 3803: {
! 3804: return xstrdup (pathspec);
! 3805: }
! 3806:
! 3807: tmp_pathspec = realpath (pathspec, buf);
! 3808: if (tmp_pathspec == 0)
! 3809: {
! 3810: lt_fatal ("Could not follow symlinks for %s", pathspec);
! 3811: }
! 3812: return xstrdup (tmp_pathspec);
! 3813: #endif
! 3814: }
! 3815:
! 3816: char *
! 3817: strendzap (char *str, const char *pat)
! 3818: {
! 3819: size_t len, patlen;
! 3820:
! 3821: assert (str != NULL);
! 3822: assert (pat != NULL);
! 3823:
! 3824: len = strlen (str);
! 3825: patlen = strlen (pat);
! 3826:
! 3827: if (patlen <= len)
! 3828: {
! 3829: str += len - patlen;
! 3830: if (strcmp (str, pat) == 0)
! 3831: *str = '\0';
! 3832: }
! 3833: return str;
! 3834: }
! 3835:
! 3836: static void
! 3837: lt_error_core (int exit_status, const char *mode,
! 3838: const char *message, va_list ap)
! 3839: {
! 3840: fprintf (stderr, "%s: %s: ", program_name, mode);
! 3841: vfprintf (stderr, message, ap);
! 3842: fprintf (stderr, ".\n");
! 3843:
! 3844: if (exit_status >= 0)
! 3845: exit (exit_status);
! 3846: }
! 3847:
! 3848: void
! 3849: lt_fatal (const char *message, ...)
! 3850: {
! 3851: va_list ap;
! 3852: va_start (ap, message);
! 3853: lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
! 3854: va_end (ap);
! 3855: }
! 3856:
! 3857: void
! 3858: lt_setenv (const char *name, const char *value)
! 3859: {
! 3860: LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
! 3861: (name ? name : "<NULL>"),
! 3862: (value ? value : "<NULL>")));
! 3863: {
! 3864: #ifdef HAVE_SETENV
! 3865: /* always make a copy, for consistency with !HAVE_SETENV */
! 3866: char *str = xstrdup (value);
! 3867: setenv (name, str, 1);
! 3868: #else
! 3869: int len = strlen (name) + 1 + strlen (value) + 1;
! 3870: char *str = XMALLOC (char, len);
! 3871: sprintf (str, "%s=%s", name, value);
! 3872: if (putenv (str) != EXIT_SUCCESS)
! 3873: {
! 3874: XFREE (str);
! 3875: }
! 3876: #endif
! 3877: }
! 3878: }
! 3879:
! 3880: char *
! 3881: lt_extend_str (const char *orig_value, const char *add, int to_end)
! 3882: {
! 3883: char *new_value;
! 3884: if (orig_value && *orig_value)
! 3885: {
! 3886: int orig_value_len = strlen (orig_value);
! 3887: int add_len = strlen (add);
! 3888: new_value = XMALLOC (char, add_len + orig_value_len + 1);
! 3889: if (to_end)
! 3890: {
! 3891: strcpy (new_value, orig_value);
! 3892: strcpy (new_value + orig_value_len, add);
! 3893: }
! 3894: else
! 3895: {
! 3896: strcpy (new_value, add);
! 3897: strcpy (new_value + add_len, orig_value);
! 3898: }
! 3899: }
! 3900: else
! 3901: {
! 3902: new_value = xstrdup (add);
! 3903: }
! 3904: return new_value;
! 3905: }
! 3906:
! 3907: int
! 3908: lt_split_name_value (const char *arg, char** name, char** value)
! 3909: {
! 3910: const char *p;
! 3911: int len;
! 3912: if (!arg || !*arg)
! 3913: return 1;
! 3914:
! 3915: p = strchr (arg, (int)'=');
! 3916:
! 3917: if (!p)
! 3918: return 1;
! 3919:
! 3920: *value = xstrdup (++p);
! 3921:
! 3922: len = strlen (arg) - strlen (*value);
! 3923: *name = XMALLOC (char, len);
! 3924: strncpy (*name, arg, len-1);
! 3925: (*name)[len - 1] = '\0';
! 3926:
! 3927: return 0;
! 3928: }
! 3929:
! 3930: void
! 3931: lt_opt_process_env_set (const char *arg)
! 3932: {
! 3933: char *name = NULL;
! 3934: char *value = NULL;
! 3935:
! 3936: if (lt_split_name_value (arg, &name, &value) != 0)
! 3937: {
! 3938: XFREE (name);
! 3939: XFREE (value);
! 3940: lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
! 3941: }
! 3942:
! 3943: lt_setenv (name, value);
! 3944: XFREE (name);
! 3945: XFREE (value);
! 3946: }
! 3947:
! 3948: void
! 3949: lt_opt_process_env_prepend (const char *arg)
! 3950: {
! 3951: char *name = NULL;
! 3952: char *value = NULL;
! 3953: char *new_value = NULL;
! 3954:
! 3955: if (lt_split_name_value (arg, &name, &value) != 0)
! 3956: {
! 3957: XFREE (name);
! 3958: XFREE (value);
! 3959: lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
! 3960: }
! 3961:
! 3962: new_value = lt_extend_str (getenv (name), value, 0);
! 3963: lt_setenv (name, new_value);
! 3964: XFREE (new_value);
! 3965: XFREE (name);
! 3966: XFREE (value);
! 3967: }
! 3968:
! 3969: void
! 3970: lt_opt_process_env_append (const char *arg)
! 3971: {
! 3972: char *name = NULL;
! 3973: char *value = NULL;
! 3974: char *new_value = NULL;
! 3975:
! 3976: if (lt_split_name_value (arg, &name, &value) != 0)
! 3977: {
! 3978: XFREE (name);
! 3979: XFREE (value);
! 3980: lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
! 3981: }
! 3982:
! 3983: new_value = lt_extend_str (getenv (name), value, 1);
! 3984: lt_setenv (name, new_value);
! 3985: XFREE (new_value);
! 3986: XFREE (name);
! 3987: XFREE (value);
! 3988: }
! 3989:
! 3990: void
! 3991: lt_update_exe_path (const char *name, const char *value)
! 3992: {
! 3993: LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
! 3994: (name ? name : "<NULL>"),
! 3995: (value ? value : "<NULL>")));
! 3996:
! 3997: if (name && *name && value && *value)
! 3998: {
! 3999: char *new_value = lt_extend_str (getenv (name), value, 0);
! 4000: /* some systems can't cope with a ':'-terminated path #' */
! 4001: int len = strlen (new_value);
! 4002: while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
! 4003: {
! 4004: new_value[len-1] = '\0';
! 4005: }
! 4006: lt_setenv (name, new_value);
! 4007: XFREE (new_value);
! 4008: }
! 4009: }
! 4010:
! 4011: void
! 4012: lt_update_lib_path (const char *name, const char *value)
! 4013: {
! 4014: LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
! 4015: (name ? name : "<NULL>"),
! 4016: (value ? value : "<NULL>")));
! 4017:
! 4018: if (name && *name && value && *value)
! 4019: {
! 4020: char *new_value = lt_extend_str (getenv (name), value, 0);
! 4021: lt_setenv (name, new_value);
! 4022: XFREE (new_value);
! 4023: }
! 4024: }
! 4025:
! 4026:
! 4027: EOF
! 4028: }
! 4029: # end: func_emit_cwrapperexe_src
! 4030:
! 4031: # func_mode_link arg...
! 4032: func_mode_link ()
! 4033: {
! 4034: $opt_debug
! 4035: case $host in
! 4036: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
! 4037: # It is impossible to link a dll without this setting, and
! 4038: # we shouldn't force the makefile maintainer to figure out
! 4039: # which system we are compiling for in order to pass an extra
! 4040: # flag for every libtool invocation.
! 4041: # allow_undefined=no
! 4042:
! 4043: # FIXME: Unfortunately, there are problems with the above when trying
! 4044: # to make a dll which has undefined symbols, in which case not
! 4045: # even a static library is built. For now, we need to specify
! 4046: # -no-undefined on the libtool link line when we can be certain
! 4047: # that all symbols are satisfied, otherwise we get a static library.
! 4048: allow_undefined=yes
! 4049: ;;
! 4050: *)
! 4051: allow_undefined=yes
! 4052: ;;
! 4053: esac
! 4054: libtool_args=$nonopt
! 4055: base_compile="$nonopt $@"
! 4056: compile_command=$nonopt
! 4057: finalize_command=$nonopt
! 4058:
! 4059: compile_rpath=
! 4060: finalize_rpath=
! 4061: compile_shlibpath=
! 4062: finalize_shlibpath=
! 4063: convenience=
! 4064: old_convenience=
! 4065: deplibs=
! 4066: old_deplibs=
! 4067: compiler_flags=
! 4068: linker_flags=
! 4069: dllsearchpath=
! 4070: lib_search_path=`pwd`
! 4071: inst_prefix_dir=
! 4072: new_inherited_linker_flags=
! 4073:
! 4074: avoid_version=no
! 4075: dlfiles=
! 4076: dlprefiles=
! 4077: dlself=no
! 4078: export_dynamic=no
! 4079: export_symbols=
! 4080: export_symbols_regex=
! 4081: generated=
! 4082: libobjs=
! 4083: ltlibs=
! 4084: module=no
! 4085: no_install=no
! 4086: objs=
! 4087: non_pic_objects=
! 4088: precious_files_regex=
! 4089: prefer_static_libs=no
! 4090: preload=no
! 4091: prev=
! 4092: prevarg=
! 4093: release=
! 4094: rpath=
! 4095: xrpath=
! 4096: perm_rpath=
! 4097: temp_rpath=
! 4098: thread_safe=no
! 4099: vinfo=
! 4100: vinfo_number=no
! 4101: weak_libs=
! 4102: single_module="${wl}-single_module"
! 4103: func_infer_tag $base_compile
! 4104:
! 4105: # We need to know -static, to get the right output filenames.
! 4106: for arg
! 4107: do
! 4108: case $arg in
! 4109: -shared)
! 4110: test "$build_libtool_libs" != yes && \
! 4111: func_fatal_configuration "can not build a shared library"
! 4112: build_old_libs=no
! 4113: break
! 4114: ;;
! 4115: -all-static | -static | -static-libtool-libs)
! 4116: case $arg in
! 4117: -all-static)
! 4118: if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
! 4119: func_warning "complete static linking is impossible in this configuration"
! 4120: fi
! 4121: if test -n "$link_static_flag"; then
! 4122: dlopen_self=$dlopen_self_static
! 4123: fi
! 4124: prefer_static_libs=yes
! 4125: ;;
! 4126: -static)
! 4127: if test -z "$pic_flag" && test -n "$link_static_flag"; then
! 4128: dlopen_self=$dlopen_self_static
! 4129: fi
! 4130: prefer_static_libs=built
! 4131: ;;
! 4132: -static-libtool-libs)
! 4133: if test -z "$pic_flag" && test -n "$link_static_flag"; then
! 4134: dlopen_self=$dlopen_self_static
! 4135: fi
! 4136: prefer_static_libs=yes
! 4137: ;;
! 4138: esac
! 4139: build_libtool_libs=no
! 4140: build_old_libs=yes
! 4141: break
! 4142: ;;
! 4143: esac
! 4144: done
! 4145:
! 4146: # See if our shared archives depend on static archives.
! 4147: test -n "$old_archive_from_new_cmds" && build_old_libs=yes
! 4148:
! 4149: # Go through the arguments, transforming them on the way.
! 4150: while test "$#" -gt 0; do
! 4151: arg="$1"
! 4152: shift
! 4153: func_quote_for_eval "$arg"
! 4154: qarg=$func_quote_for_eval_unquoted_result
! 4155: func_append libtool_args " $func_quote_for_eval_result"
! 4156:
! 4157: # If the previous option needs an argument, assign it.
! 4158: if test -n "$prev"; then
! 4159: case $prev in
! 4160: output)
! 4161: func_append compile_command " @OUTPUT@"
! 4162: func_append finalize_command " @OUTPUT@"
! 4163: ;;
! 4164: esac
! 4165:
! 4166: case $prev in
! 4167: dlfiles|dlprefiles)
! 4168: if test "$preload" = no; then
! 4169: # Add the symbol object into the linking commands.
! 4170: func_append compile_command " @SYMFILE@"
! 4171: func_append finalize_command " @SYMFILE@"
! 4172: preload=yes
! 4173: fi
! 4174: case $arg in
! 4175: *.la | *.lo) ;; # We handle these cases below.
! 4176: force)
! 4177: if test "$dlself" = no; then
! 4178: dlself=needless
! 4179: export_dynamic=yes
! 4180: fi
! 4181: prev=
! 4182: continue
! 4183: ;;
! 4184: self)
! 4185: if test "$prev" = dlprefiles; then
! 4186: dlself=yes
! 4187: elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
! 4188: dlself=yes
! 4189: else
! 4190: dlself=needless
! 4191: export_dynamic=yes
! 4192: fi
! 4193: prev=
! 4194: continue
! 4195: ;;
! 4196: *)
! 4197: if test "$prev" = dlfiles; then
! 4198: dlfiles="$dlfiles $arg"
! 4199: else
! 4200: dlprefiles="$dlprefiles $arg"
! 4201: fi
! 4202: prev=
! 4203: continue
! 4204: ;;
! 4205: esac
! 4206: ;;
! 4207: expsyms)
! 4208: export_symbols="$arg"
! 4209: test -f "$arg" \
! 4210: || func_fatal_error "symbol file \`$arg' does not exist"
! 4211: prev=
! 4212: continue
! 4213: ;;
! 4214: expsyms_regex)
! 4215: export_symbols_regex="$arg"
! 4216: prev=
! 4217: continue
! 4218: ;;
! 4219: framework)
! 4220: case $host in
! 4221: *-*-darwin*)
! 4222: case "$deplibs " in
! 4223: *" $qarg.ltframework "*) ;;
! 4224: *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
! 4225: ;;
! 4226: esac
! 4227: ;;
! 4228: esac
! 4229: prev=
! 4230: continue
! 4231: ;;
! 4232: inst_prefix)
! 4233: inst_prefix_dir="$arg"
! 4234: prev=
! 4235: continue
! 4236: ;;
! 4237: objectlist)
! 4238: if test -f "$arg"; then
! 4239: save_arg=$arg
! 4240: moreargs=
! 4241: for fil in `cat "$save_arg"`
! 4242: do
! 4243: # moreargs="$moreargs $fil"
! 4244: arg=$fil
! 4245: # A libtool-controlled object.
! 4246:
! 4247: # Check to see that this really is a libtool object.
! 4248: if func_lalib_unsafe_p "$arg"; then
! 4249: pic_object=
! 4250: non_pic_object=
! 4251:
! 4252: # Read the .lo file
! 4253: func_source "$arg"
! 4254:
! 4255: if test -z "$pic_object" ||
! 4256: test -z "$non_pic_object" ||
! 4257: test "$pic_object" = none &&
! 4258: test "$non_pic_object" = none; then
! 4259: func_fatal_error "cannot find name of object for \`$arg'"
! 4260: fi
! 4261:
! 4262: # Extract subdirectory from the argument.
! 4263: func_dirname "$arg" "/" ""
! 4264: xdir="$func_dirname_result"
! 4265:
! 4266: if test "$pic_object" != none; then
! 4267: # Prepend the subdirectory the object is found in.
! 4268: pic_object="$xdir$pic_object"
! 4269:
! 4270: if test "$prev" = dlfiles; then
! 4271: if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
! 4272: dlfiles="$dlfiles $pic_object"
! 4273: prev=
! 4274: continue
! 4275: else
! 4276: # If libtool objects are unsupported, then we need to preload.
! 4277: prev=dlprefiles
! 4278: fi
! 4279: fi
! 4280:
! 4281: # CHECK ME: I think I busted this. -Ossama
! 4282: if test "$prev" = dlprefiles; then
! 4283: # Preload the old-style object.
! 4284: dlprefiles="$dlprefiles $pic_object"
! 4285: prev=
! 4286: fi
! 4287:
! 4288: # A PIC object.
! 4289: func_append libobjs " $pic_object"
! 4290: arg="$pic_object"
! 4291: fi
! 4292:
! 4293: # Non-PIC object.
! 4294: if test "$non_pic_object" != none; then
! 4295: # Prepend the subdirectory the object is found in.
! 4296: non_pic_object="$xdir$non_pic_object"
! 4297:
! 4298: # A standard non-PIC object
! 4299: func_append non_pic_objects " $non_pic_object"
! 4300: if test -z "$pic_object" || test "$pic_object" = none ; then
! 4301: arg="$non_pic_object"
! 4302: fi
! 4303: else
! 4304: # If the PIC object exists, use it instead.
! 4305: # $xdir was prepended to $pic_object above.
! 4306: non_pic_object="$pic_object"
! 4307: func_append non_pic_objects " $non_pic_object"
! 4308: fi
! 4309: else
! 4310: # Only an error if not doing a dry-run.
! 4311: if $opt_dry_run; then
! 4312: # Extract subdirectory from the argument.
! 4313: func_dirname "$arg" "/" ""
! 4314: xdir="$func_dirname_result"
! 4315:
! 4316: func_lo2o "$arg"
! 4317: pic_object=$xdir$objdir/$func_lo2o_result
! 4318: non_pic_object=$xdir$func_lo2o_result
! 4319: func_append libobjs " $pic_object"
! 4320: func_append non_pic_objects " $non_pic_object"
! 4321: else
! 4322: func_fatal_error "\`$arg' is not a valid libtool object"
! 4323: fi
! 4324: fi
! 4325: done
! 4326: else
! 4327: func_fatal_error "link input file \`$arg' does not exist"
! 4328: fi
! 4329: arg=$save_arg
! 4330: prev=
! 4331: continue
! 4332: ;;
! 4333: precious_regex)
! 4334: precious_files_regex="$arg"
! 4335: prev=
! 4336: continue
! 4337: ;;
! 4338: release)
! 4339: release="-$arg"
! 4340: prev=
! 4341: continue
! 4342: ;;
! 4343: rpath | xrpath)
! 4344: # We need an absolute path.
! 4345: case $arg in
! 4346: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 4347: *)
! 4348: func_fatal_error "only absolute run-paths are allowed"
! 4349: ;;
! 4350: esac
! 4351: if test "$prev" = rpath; then
! 4352: case "$rpath " in
! 4353: *" $arg "*) ;;
! 4354: *) rpath="$rpath $arg" ;;
! 4355: esac
! 4356: else
! 4357: case "$xrpath " in
! 4358: *" $arg "*) ;;
! 4359: *) xrpath="$xrpath $arg" ;;
! 4360: esac
! 4361: fi
! 4362: prev=
! 4363: continue
! 4364: ;;
! 4365: shrext)
! 4366: shrext_cmds="$arg"
! 4367: prev=
! 4368: continue
! 4369: ;;
! 4370: weak)
! 4371: weak_libs="$weak_libs $arg"
! 4372: prev=
! 4373: continue
! 4374: ;;
! 4375: xcclinker)
! 4376: linker_flags="$linker_flags $qarg"
! 4377: compiler_flags="$compiler_flags $qarg"
! 4378: prev=
! 4379: func_append compile_command " $qarg"
! 4380: func_append finalize_command " $qarg"
! 4381: continue
! 4382: ;;
! 4383: xcompiler)
! 4384: compiler_flags="$compiler_flags $qarg"
! 4385: prev=
! 4386: func_append compile_command " $qarg"
! 4387: func_append finalize_command " $qarg"
! 4388: continue
! 4389: ;;
! 4390: xlinker)
! 4391: linker_flags="$linker_flags $qarg"
! 4392: compiler_flags="$compiler_flags $wl$qarg"
! 4393: prev=
! 4394: func_append compile_command " $wl$qarg"
! 4395: func_append finalize_command " $wl$qarg"
! 4396: continue
! 4397: ;;
! 4398: *)
! 4399: eval "$prev=\"\$arg\""
! 4400: prev=
! 4401: continue
! 4402: ;;
! 4403: esac
! 4404: fi # test -n "$prev"
! 4405:
! 4406: prevarg="$arg"
! 4407:
! 4408: case $arg in
! 4409: -all-static)
! 4410: if test -n "$link_static_flag"; then
! 4411: # See comment for -static flag below, for more details.
! 4412: func_append compile_command " $link_static_flag"
! 4413: func_append finalize_command " $link_static_flag"
! 4414: fi
! 4415: continue
! 4416: ;;
! 4417:
! 4418: -allow-undefined)
! 4419: # FIXME: remove this flag sometime in the future.
! 4420: func_fatal_error "\`-allow-undefined' must not be used because it is the default"
! 4421: ;;
! 4422:
! 4423: -avoid-version)
! 4424: avoid_version=yes
! 4425: continue
! 4426: ;;
! 4427:
! 4428: -dlopen)
! 4429: prev=dlfiles
! 4430: continue
! 4431: ;;
! 4432:
! 4433: -dlpreopen)
! 4434: prev=dlprefiles
! 4435: continue
! 4436: ;;
! 4437:
! 4438: -export-dynamic)
! 4439: export_dynamic=yes
! 4440: continue
! 4441: ;;
! 4442:
! 4443: -export-symbols | -export-symbols-regex)
! 4444: if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
! 4445: func_fatal_error "more than one -exported-symbols argument is not allowed"
! 4446: fi
! 4447: if test "X$arg" = "X-export-symbols"; then
! 4448: prev=expsyms
! 4449: else
! 4450: prev=expsyms_regex
! 4451: fi
! 4452: continue
! 4453: ;;
! 4454:
! 4455: -framework)
! 4456: prev=framework
! 4457: continue
! 4458: ;;
! 4459:
! 4460: -inst-prefix-dir)
! 4461: prev=inst_prefix
! 4462: continue
! 4463: ;;
! 4464:
! 4465: # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
! 4466: # so, if we see these flags be careful not to treat them like -L
! 4467: -L[A-Z][A-Z]*:*)
! 4468: case $with_gcc/$host in
! 4469: no/*-*-irix* | /*-*-irix*)
! 4470: func_append compile_command " $arg"
! 4471: func_append finalize_command " $arg"
! 4472: ;;
! 4473: esac
! 4474: continue
! 4475: ;;
! 4476:
! 4477: -L*)
! 4478: func_stripname '-L' '' "$arg"
! 4479: dir=$func_stripname_result
! 4480: if test -z "$dir"; then
! 4481: if test "$#" -gt 0; then
! 4482: func_fatal_error "require no space between \`-L' and \`$1'"
! 4483: else
! 4484: func_fatal_error "need path for \`-L' option"
! 4485: fi
! 4486: fi
! 4487: # We need an absolute path.
! 4488: case $dir in
! 4489: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 4490: *)
! 4491: absdir=`cd "$dir" && pwd`
! 4492: test -z "$absdir" && \
! 4493: func_fatal_error "cannot determine absolute directory name of \`$dir'"
! 4494: dir="$absdir"
! 4495: ;;
! 4496: esac
! 4497: case "$deplibs " in
! 4498: *" -L$dir "*) ;;
! 4499: *)
! 4500: deplibs="$deplibs -L$dir"
! 4501: lib_search_path="$lib_search_path $dir"
! 4502: ;;
! 4503: esac
! 4504: case $host in
! 4505: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
! 4506: testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
! 4507: case :$dllsearchpath: in
! 4508: *":$dir:"*) ;;
! 4509: ::) dllsearchpath=$dir;;
! 4510: *) dllsearchpath="$dllsearchpath:$dir";;
! 4511: esac
! 4512: case :$dllsearchpath: in
! 4513: *":$testbindir:"*) ;;
! 4514: ::) dllsearchpath=$testbindir;;
! 4515: *) dllsearchpath="$dllsearchpath:$testbindir";;
! 4516: esac
! 4517: ;;
! 4518: esac
! 4519: continue
! 4520: ;;
! 4521:
! 4522: -l*)
! 4523: if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
! 4524: case $host in
! 4525: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
! 4526: # These systems don't actually have a C or math library (as such)
! 4527: continue
! 4528: ;;
! 4529: *-*-os2*)
! 4530: # These systems don't actually have a C library (as such)
! 4531: test "X$arg" = "X-lc" && continue
! 4532: ;;
! 4533: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 4534: # Do not include libc due to us having libc/libc_r.
! 4535: test "X$arg" = "X-lc" && continue
! 4536: ;;
! 4537: *-*-rhapsody* | *-*-darwin1.[012])
! 4538: # Rhapsody C and math libraries are in the System framework
! 4539: deplibs="$deplibs System.ltframework"
! 4540: continue
! 4541: ;;
! 4542: *-*-sco3.2v5* | *-*-sco5v6*)
! 4543: # Causes problems with __ctype
! 4544: test "X$arg" = "X-lc" && continue
! 4545: ;;
! 4546: *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
! 4547: # Compiler inserts libc in the correct place for threads to work
! 4548: test "X$arg" = "X-lc" && continue
! 4549: ;;
! 4550: esac
! 4551: elif test "X$arg" = "X-lc_r"; then
! 4552: case $host in
! 4553: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 4554: # Do not include libc_r directly, use -pthread flag.
! 4555: continue
! 4556: ;;
! 4557: esac
! 4558: fi
! 4559: deplibs="$deplibs $arg"
! 4560: continue
! 4561: ;;
! 4562:
! 4563: -module)
! 4564: module=yes
! 4565: continue
! 4566: ;;
! 4567:
! 4568: # Tru64 UNIX uses -model [arg] to determine the layout of C++
! 4569: # classes, name mangling, and exception handling.
! 4570: # Darwin uses the -arch flag to determine output architecture.
! 4571: -model|-arch|-isysroot)
! 4572: compiler_flags="$compiler_flags $arg"
! 4573: func_append compile_command " $arg"
! 4574: func_append finalize_command " $arg"
! 4575: prev=xcompiler
! 4576: continue
! 4577: ;;
! 4578:
! 4579: -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
! 4580: compiler_flags="$compiler_flags $arg"
! 4581: func_append compile_command " $arg"
! 4582: func_append finalize_command " $arg"
! 4583: case "$new_inherited_linker_flags " in
! 4584: *" $arg "*) ;;
! 4585: * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
! 4586: esac
! 4587: continue
! 4588: ;;
! 4589:
! 4590: -multi_module)
! 4591: single_module="${wl}-multi_module"
! 4592: continue
! 4593: ;;
! 4594:
! 4595: -no-fast-install)
! 4596: fast_install=no
! 4597: continue
! 4598: ;;
! 4599:
! 4600: -no-install)
! 4601: case $host in
! 4602: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
! 4603: # The PATH hackery in wrapper scripts is required on Windows
! 4604: # and Darwin in order for the loader to find any dlls it needs.
! 4605: func_warning "\`-no-install' is ignored for $host"
! 4606: func_warning "assuming \`-no-fast-install' instead"
! 4607: fast_install=no
! 4608: ;;
! 4609: *) no_install=yes ;;
! 4610: esac
! 4611: continue
! 4612: ;;
! 4613:
! 4614: -no-undefined)
! 4615: allow_undefined=no
! 4616: continue
! 4617: ;;
! 4618:
! 4619: -objectlist)
! 4620: prev=objectlist
! 4621: continue
! 4622: ;;
! 4623:
! 4624: -o) prev=output ;;
! 4625:
! 4626: -precious-files-regex)
! 4627: prev=precious_regex
! 4628: continue
! 4629: ;;
! 4630:
! 4631: -release)
! 4632: prev=release
! 4633: continue
! 4634: ;;
! 4635:
! 4636: -rpath)
! 4637: prev=rpath
! 4638: continue
! 4639: ;;
! 4640:
! 4641: -R)
! 4642: prev=xrpath
! 4643: continue
! 4644: ;;
! 4645:
! 4646: -R*)
! 4647: func_stripname '-R' '' "$arg"
! 4648: dir=$func_stripname_result
! 4649: # We need an absolute path.
! 4650: case $dir in
! 4651: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 4652: *)
! 4653: func_fatal_error "only absolute run-paths are allowed"
! 4654: ;;
! 4655: esac
! 4656: case "$xrpath " in
! 4657: *" $dir "*) ;;
! 4658: *) xrpath="$xrpath $dir" ;;
! 4659: esac
! 4660: continue
! 4661: ;;
! 4662:
! 4663: -shared)
! 4664: # The effects of -shared are defined in a previous loop.
! 4665: continue
! 4666: ;;
! 4667:
! 4668: -shrext)
! 4669: prev=shrext
! 4670: continue
! 4671: ;;
! 4672:
! 4673: -static | -static-libtool-libs)
! 4674: # The effects of -static are defined in a previous loop.
! 4675: # We used to do the same as -all-static on platforms that
! 4676: # didn't have a PIC flag, but the assumption that the effects
! 4677: # would be equivalent was wrong. It would break on at least
! 4678: # Digital Unix and AIX.
! 4679: continue
! 4680: ;;
! 4681:
! 4682: -thread-safe)
! 4683: thread_safe=yes
! 4684: continue
! 4685: ;;
! 4686:
! 4687: -version-info)
! 4688: prev=vinfo
! 4689: continue
! 4690: ;;
! 4691:
! 4692: -version-number)
! 4693: prev=vinfo
! 4694: vinfo_number=yes
! 4695: continue
! 4696: ;;
! 4697:
! 4698: -weak)
! 4699: prev=weak
! 4700: continue
! 4701: ;;
! 4702:
! 4703: -Wc,*)
! 4704: func_stripname '-Wc,' '' "$arg"
! 4705: args=$func_stripname_result
! 4706: arg=
! 4707: save_ifs="$IFS"; IFS=','
! 4708: for flag in $args; do
! 4709: IFS="$save_ifs"
! 4710: func_quote_for_eval "$flag"
! 4711: arg="$arg $wl$func_quote_for_eval_result"
! 4712: compiler_flags="$compiler_flags $func_quote_for_eval_result"
! 4713: done
! 4714: IFS="$save_ifs"
! 4715: func_stripname ' ' '' "$arg"
! 4716: arg=$func_stripname_result
! 4717: ;;
! 4718:
! 4719: -Wl,*)
! 4720: func_stripname '-Wl,' '' "$arg"
! 4721: args=$func_stripname_result
! 4722: arg=
! 4723: save_ifs="$IFS"; IFS=','
! 4724: for flag in $args; do
! 4725: IFS="$save_ifs"
! 4726: func_quote_for_eval "$flag"
! 4727: arg="$arg $wl$func_quote_for_eval_result"
! 4728: compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
! 4729: linker_flags="$linker_flags $func_quote_for_eval_result"
! 4730: done
! 4731: IFS="$save_ifs"
! 4732: func_stripname ' ' '' "$arg"
! 4733: arg=$func_stripname_result
! 4734: ;;
! 4735:
! 4736: -Xcompiler)
! 4737: prev=xcompiler
! 4738: continue
! 4739: ;;
! 4740:
! 4741: -Xlinker)
! 4742: prev=xlinker
! 4743: continue
! 4744: ;;
! 4745:
! 4746: -XCClinker)
! 4747: prev=xcclinker
! 4748: continue
! 4749: ;;
! 4750:
! 4751: # -msg_* for osf cc
! 4752: -msg_*)
! 4753: func_quote_for_eval "$arg"
! 4754: arg="$func_quote_for_eval_result"
! 4755: ;;
! 4756:
! 4757: # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
! 4758: # -r[0-9][0-9]* specifies the processor on the SGI compiler
! 4759: # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
! 4760: # +DA*, +DD* enable 64-bit mode on the HP compiler
! 4761: # -q* pass through compiler args for the IBM compiler
! 4762: # -m*, -t[45]*, -txscale* pass through architecture-specific
! 4763: # compiler args for GCC
! 4764: # -F/path gives path to uninstalled frameworks, gcc on darwin
! 4765: # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
! 4766: # @file GCC response files
! 4767: -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
! 4768: -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
! 4769: func_quote_for_eval "$arg"
! 4770: arg="$func_quote_for_eval_result"
! 4771: func_append compile_command " $arg"
! 4772: func_append finalize_command " $arg"
! 4773: compiler_flags="$compiler_flags $arg"
! 4774: continue
! 4775: ;;
! 4776:
! 4777: # Some other compiler flag.
! 4778: -* | +*)
! 4779: func_quote_for_eval "$arg"
! 4780: arg="$func_quote_for_eval_result"
! 4781: ;;
! 4782:
! 4783: *.$objext)
! 4784: # A standard object.
! 4785: objs="$objs $arg"
! 4786: ;;
! 4787:
! 4788: *.lo)
! 4789: # A libtool-controlled object.
! 4790:
! 4791: # Check to see that this really is a libtool object.
! 4792: if func_lalib_unsafe_p "$arg"; then
! 4793: pic_object=
! 4794: non_pic_object=
! 4795:
! 4796: # Read the .lo file
! 4797: func_source "$arg"
! 4798:
! 4799: if test -z "$pic_object" ||
! 4800: test -z "$non_pic_object" ||
! 4801: test "$pic_object" = none &&
! 4802: test "$non_pic_object" = none; then
! 4803: func_fatal_error "cannot find name of object for \`$arg'"
! 4804: fi
! 4805:
! 4806: # Extract subdirectory from the argument.
! 4807: func_dirname "$arg" "/" ""
! 4808: xdir="$func_dirname_result"
! 4809:
! 4810: if test "$pic_object" != none; then
! 4811: # Prepend the subdirectory the object is found in.
! 4812: pic_object="$xdir$pic_object"
! 4813:
! 4814: if test "$prev" = dlfiles; then
! 4815: if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
! 4816: dlfiles="$dlfiles $pic_object"
! 4817: prev=
! 4818: continue
! 4819: else
! 4820: # If libtool objects are unsupported, then we need to preload.
! 4821: prev=dlprefiles
! 4822: fi
! 4823: fi
! 4824:
! 4825: # CHECK ME: I think I busted this. -Ossama
! 4826: if test "$prev" = dlprefiles; then
! 4827: # Preload the old-style object.
! 4828: dlprefiles="$dlprefiles $pic_object"
! 4829: prev=
! 4830: fi
! 4831:
! 4832: # A PIC object.
! 4833: func_append libobjs " $pic_object"
! 4834: arg="$pic_object"
! 4835: fi
! 4836:
! 4837: # Non-PIC object.
! 4838: if test "$non_pic_object" != none; then
! 4839: # Prepend the subdirectory the object is found in.
! 4840: non_pic_object="$xdir$non_pic_object"
! 4841:
! 4842: # A standard non-PIC object
! 4843: func_append non_pic_objects " $non_pic_object"
! 4844: if test -z "$pic_object" || test "$pic_object" = none ; then
! 4845: arg="$non_pic_object"
! 4846: fi
! 4847: else
! 4848: # If the PIC object exists, use it instead.
! 4849: # $xdir was prepended to $pic_object above.
! 4850: non_pic_object="$pic_object"
! 4851: func_append non_pic_objects " $non_pic_object"
! 4852: fi
! 4853: else
! 4854: # Only an error if not doing a dry-run.
! 4855: if $opt_dry_run; then
! 4856: # Extract subdirectory from the argument.
! 4857: func_dirname "$arg" "/" ""
! 4858: xdir="$func_dirname_result"
! 4859:
! 4860: func_lo2o "$arg"
! 4861: pic_object=$xdir$objdir/$func_lo2o_result
! 4862: non_pic_object=$xdir$func_lo2o_result
! 4863: func_append libobjs " $pic_object"
! 4864: func_append non_pic_objects " $non_pic_object"
! 4865: else
! 4866: func_fatal_error "\`$arg' is not a valid libtool object"
! 4867: fi
! 4868: fi
! 4869: ;;
! 4870:
! 4871: *.$libext)
! 4872: # An archive.
! 4873: deplibs="$deplibs $arg"
! 4874: old_deplibs="$old_deplibs $arg"
! 4875: continue
! 4876: ;;
! 4877:
! 4878: *.la)
! 4879: # A libtool-controlled library.
! 4880:
! 4881: if test "$prev" = dlfiles; then
! 4882: # This library was specified with -dlopen.
! 4883: dlfiles="$dlfiles $arg"
! 4884: prev=
! 4885: elif test "$prev" = dlprefiles; then
! 4886: # The library was specified with -dlpreopen.
! 4887: dlprefiles="$dlprefiles $arg"
! 4888: prev=
! 4889: else
! 4890: deplibs="$deplibs $arg"
! 4891: fi
! 4892: continue
! 4893: ;;
! 4894:
! 4895: # Some other compiler argument.
! 4896: *)
! 4897: # Unknown arguments in both finalize_command and compile_command need
! 4898: # to be aesthetically quoted because they are evaled later.
! 4899: func_quote_for_eval "$arg"
! 4900: arg="$func_quote_for_eval_result"
! 4901: ;;
! 4902: esac # arg
! 4903:
! 4904: # Now actually substitute the argument into the commands.
! 4905: if test -n "$arg"; then
! 4906: func_append compile_command " $arg"
! 4907: func_append finalize_command " $arg"
! 4908: fi
! 4909: done # argument parsing loop
! 4910:
! 4911: test -n "$prev" && \
! 4912: func_fatal_help "the \`$prevarg' option requires an argument"
! 4913:
! 4914: if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
! 4915: eval arg=\"$export_dynamic_flag_spec\"
! 4916: func_append compile_command " $arg"
! 4917: func_append finalize_command " $arg"
! 4918: fi
! 4919:
! 4920: oldlibs=
! 4921: # calculate the name of the file, without its directory
! 4922: func_basename "$output"
! 4923: outputname="$func_basename_result"
! 4924: libobjs_save="$libobjs"
! 4925:
! 4926: if test -n "$shlibpath_var"; then
! 4927: # get the directories listed in $shlibpath_var
! 4928: eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
! 4929: else
! 4930: shlib_search_path=
! 4931: fi
! 4932: eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
! 4933: eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
! 4934:
! 4935: func_dirname "$output" "/" ""
! 4936: output_objdir="$func_dirname_result$objdir"
! 4937: # Create the object directory.
! 4938: func_mkdir_p "$output_objdir"
! 4939:
! 4940: # Determine the type of output
! 4941: case $output in
! 4942: "")
! 4943: func_fatal_help "you must specify an output file"
! 4944: ;;
! 4945: *.$libext) linkmode=oldlib ;;
! 4946: *.lo | *.$objext) linkmode=obj ;;
! 4947: *.la) linkmode=lib ;;
! 4948: *) linkmode=prog ;; # Anything else should be a program.
! 4949: esac
! 4950:
! 4951: specialdeplibs=
! 4952:
! 4953: libs=
! 4954: # Find all interdependent deplibs by searching for libraries
! 4955: # that are linked more than once (e.g. -la -lb -la)
! 4956: for deplib in $deplibs; do
! 4957: if $opt_duplicate_deps ; then
! 4958: case "$libs " in
! 4959: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 4960: esac
! 4961: fi
! 4962: libs="$libs $deplib"
! 4963: done
! 4964:
! 4965: if test "$linkmode" = lib; then
! 4966: libs="$predeps $libs $compiler_lib_search_path $postdeps"
! 4967:
! 4968: # Compute libraries that are listed more than once in $predeps
! 4969: # $postdeps and mark them as special (i.e., whose duplicates are
! 4970: # not to be eliminated).
! 4971: pre_post_deps=
! 4972: if $opt_duplicate_compiler_generated_deps; then
! 4973: for pre_post_dep in $predeps $postdeps; do
! 4974: case "$pre_post_deps " in
! 4975: *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
! 4976: esac
! 4977: pre_post_deps="$pre_post_deps $pre_post_dep"
! 4978: done
! 4979: fi
! 4980: pre_post_deps=
! 4981: fi
! 4982:
! 4983: deplibs=
! 4984: newdependency_libs=
! 4985: newlib_search_path=
! 4986: need_relink=no # whether we're linking any uninstalled libtool libraries
! 4987: notinst_deplibs= # not-installed libtool libraries
! 4988: notinst_path= # paths that contain not-installed libtool libraries
! 4989:
! 4990: case $linkmode in
! 4991: lib)
! 4992: passes="conv dlpreopen link"
! 4993: for file in $dlfiles $dlprefiles; do
! 4994: case $file in
! 4995: *.la) ;;
! 4996: *)
! 4997: func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
! 4998: ;;
! 4999: esac
! 5000: done
! 5001: ;;
! 5002: prog)
! 5003: compile_deplibs=
! 5004: finalize_deplibs=
! 5005: alldeplibs=no
! 5006: newdlfiles=
! 5007: newdlprefiles=
! 5008: passes="conv scan dlopen dlpreopen link"
! 5009: ;;
! 5010: *) passes="conv"
! 5011: ;;
! 5012: esac
! 5013:
! 5014: for pass in $passes; do
! 5015: # The preopen pass in lib mode reverses $deplibs; put it back here
! 5016: # so that -L comes before libs that need it for instance...
! 5017: if test "$linkmode,$pass" = "lib,link"; then
! 5018: ## FIXME: Find the place where the list is rebuilt in the wrong
! 5019: ## order, and fix it there properly
! 5020: tmp_deplibs=
! 5021: for deplib in $deplibs; do
! 5022: tmp_deplibs="$deplib $tmp_deplibs"
! 5023: done
! 5024: deplibs="$tmp_deplibs"
! 5025: fi
! 5026:
! 5027: if test "$linkmode,$pass" = "lib,link" ||
! 5028: test "$linkmode,$pass" = "prog,scan"; then
! 5029: libs="$deplibs"
! 5030: deplibs=
! 5031: fi
! 5032: if test "$linkmode" = prog; then
! 5033: case $pass in
! 5034: dlopen) libs="$dlfiles" ;;
! 5035: dlpreopen) libs="$dlprefiles" ;;
! 5036: link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
! 5037: esac
! 5038: fi
! 5039: if test "$linkmode,$pass" = "lib,dlpreopen"; then
! 5040: # Collect and forward deplibs of preopened libtool libs
! 5041: for lib in $dlprefiles; do
! 5042: # Ignore non-libtool-libs
! 5043: dependency_libs=
! 5044: case $lib in
! 5045: *.la) func_source "$lib" ;;
! 5046: esac
! 5047:
! 5048: # Collect preopened libtool deplibs, except any this library
! 5049: # has declared as weak libs
! 5050: for deplib in $dependency_libs; do
! 5051: deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
! 5052: case " $weak_libs " in
! 5053: *" $deplib_base "*) ;;
! 5054: *) deplibs="$deplibs $deplib" ;;
! 5055: esac
! 5056: done
! 5057: done
! 5058: libs="$dlprefiles"
! 5059: fi
! 5060: if test "$pass" = dlopen; then
! 5061: # Collect dlpreopened libraries
! 5062: save_deplibs="$deplibs"
! 5063: deplibs=
! 5064: fi
! 5065:
! 5066: for deplib in $libs; do
! 5067: lib=
! 5068: found=no
! 5069: case $deplib in
! 5070: -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
! 5071: if test "$linkmode,$pass" = "prog,link"; then
! 5072: compile_deplibs="$deplib $compile_deplibs"
! 5073: finalize_deplibs="$deplib $finalize_deplibs"
! 5074: else
! 5075: compiler_flags="$compiler_flags $deplib"
! 5076: if test "$linkmode" = lib ; then
! 5077: case "$new_inherited_linker_flags " in
! 5078: *" $deplib "*) ;;
! 5079: * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
! 5080: esac
! 5081: fi
! 5082: fi
! 5083: continue
! 5084: ;;
! 5085: -l*)
! 5086: if test "$linkmode" != lib && test "$linkmode" != prog; then
! 5087: func_warning "\`-l' is ignored for archives/objects"
! 5088: continue
! 5089: fi
! 5090: func_stripname '-l' '' "$deplib"
! 5091: name=$func_stripname_result
! 5092: if test "$linkmode" = lib; then
! 5093: searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
! 5094: else
! 5095: searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
! 5096: fi
! 5097: for searchdir in $searchdirs; do
! 5098: for search_ext in .la $std_shrext .so .a; do
! 5099: # Search the libtool library
! 5100: lib="$searchdir/lib${name}${search_ext}"
! 5101: if test -f "$lib"; then
! 5102: if test "$search_ext" = ".la"; then
! 5103: found=yes
! 5104: else
! 5105: found=no
! 5106: fi
! 5107: break 2
! 5108: fi
! 5109: done
! 5110: done
! 5111: if test "$found" != yes; then
! 5112: # deplib doesn't seem to be a libtool library
! 5113: if test "$linkmode,$pass" = "prog,link"; then
! 5114: compile_deplibs="$deplib $compile_deplibs"
! 5115: finalize_deplibs="$deplib $finalize_deplibs"
! 5116: else
! 5117: deplibs="$deplib $deplibs"
! 5118: test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
! 5119: fi
! 5120: continue
! 5121: else # deplib is a libtool library
! 5122: # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
! 5123: # We need to do some special things here, and not later.
! 5124: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 5125: case " $predeps $postdeps " in
! 5126: *" $deplib "*)
! 5127: if func_lalib_p "$lib"; then
! 5128: library_names=
! 5129: old_library=
! 5130: func_source "$lib"
! 5131: for l in $old_library $library_names; do
! 5132: ll="$l"
! 5133: done
! 5134: if test "X$ll" = "X$old_library" ; then # only static version available
! 5135: found=no
! 5136: func_dirname "$lib" "" "."
! 5137: ladir="$func_dirname_result"
! 5138: lib=$ladir/$old_library
! 5139: if test "$linkmode,$pass" = "prog,link"; then
! 5140: compile_deplibs="$deplib $compile_deplibs"
! 5141: finalize_deplibs="$deplib $finalize_deplibs"
! 5142: else
! 5143: deplibs="$deplib $deplibs"
! 5144: test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
! 5145: fi
! 5146: continue
! 5147: fi
! 5148: fi
! 5149: ;;
! 5150: *) ;;
! 5151: esac
! 5152: fi
! 5153: fi
! 5154: ;; # -l
! 5155: *.ltframework)
! 5156: if test "$linkmode,$pass" = "prog,link"; then
! 5157: compile_deplibs="$deplib $compile_deplibs"
! 5158: finalize_deplibs="$deplib $finalize_deplibs"
! 5159: else
! 5160: deplibs="$deplib $deplibs"
! 5161: if test "$linkmode" = lib ; then
! 5162: case "$new_inherited_linker_flags " in
! 5163: *" $deplib "*) ;;
! 5164: * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
! 5165: esac
! 5166: fi
! 5167: fi
! 5168: continue
! 5169: ;;
! 5170: -L*)
! 5171: case $linkmode in
! 5172: lib)
! 5173: deplibs="$deplib $deplibs"
! 5174: test "$pass" = conv && continue
! 5175: newdependency_libs="$deplib $newdependency_libs"
! 5176: func_stripname '-L' '' "$deplib"
! 5177: newlib_search_path="$newlib_search_path $func_stripname_result"
! 5178: ;;
! 5179: prog)
! 5180: if test "$pass" = conv; then
! 5181: deplibs="$deplib $deplibs"
! 5182: continue
! 5183: fi
! 5184: if test "$pass" = scan; then
! 5185: deplibs="$deplib $deplibs"
! 5186: else
! 5187: compile_deplibs="$deplib $compile_deplibs"
! 5188: finalize_deplibs="$deplib $finalize_deplibs"
! 5189: fi
! 5190: func_stripname '-L' '' "$deplib"
! 5191: newlib_search_path="$newlib_search_path $func_stripname_result"
! 5192: ;;
! 5193: *)
! 5194: func_warning "\`-L' is ignored for archives/objects"
! 5195: ;;
! 5196: esac # linkmode
! 5197: continue
! 5198: ;; # -L
! 5199: -R*)
! 5200: if test "$pass" = link; then
! 5201: func_stripname '-R' '' "$deplib"
! 5202: dir=$func_stripname_result
! 5203: # Make sure the xrpath contains only unique directories.
! 5204: case "$xrpath " in
! 5205: *" $dir "*) ;;
! 5206: *) xrpath="$xrpath $dir" ;;
! 5207: esac
! 5208: fi
! 5209: deplibs="$deplib $deplibs"
! 5210: continue
! 5211: ;;
! 5212: *.la) lib="$deplib" ;;
! 5213: *.$libext)
! 5214: if test "$pass" = conv; then
! 5215: deplibs="$deplib $deplibs"
! 5216: continue
! 5217: fi
! 5218: case $linkmode in
! 5219: lib)
! 5220: # Linking convenience modules into shared libraries is allowed,
! 5221: # but linking other static libraries is non-portable.
! 5222: case " $dlpreconveniencelibs " in
! 5223: *" $deplib "*) ;;
! 5224: *)
! 5225: valid_a_lib=no
! 5226: case $deplibs_check_method in
! 5227: match_pattern*)
! 5228: set dummy $deplibs_check_method; shift
! 5229: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 5230: if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
! 5231: | $EGREP "$match_pattern_regex" > /dev/null; then
! 5232: valid_a_lib=yes
! 5233: fi
! 5234: ;;
! 5235: pass_all)
! 5236: valid_a_lib=yes
! 5237: ;;
! 5238: esac
! 5239: if test "$valid_a_lib" != yes; then
! 5240: $ECHO
! 5241: $ECHO "*** Warning: Trying to link with static lib archive $deplib."
! 5242: $ECHO "*** I have the capability to make that library automatically link in when"
! 5243: $ECHO "*** you link to this library. But I can only do this if you have a"
! 5244: $ECHO "*** shared version of the library, which you do not appear to have"
! 5245: $ECHO "*** because the file extensions .$libext of this argument makes me believe"
! 5246: $ECHO "*** that it is just a static archive that I should not use here."
! 5247: else
! 5248: $ECHO
! 5249: $ECHO "*** Warning: Linking the shared library $output against the"
! 5250: $ECHO "*** static library $deplib is not portable!"
! 5251: deplibs="$deplib $deplibs"
! 5252: fi
! 5253: ;;
! 5254: esac
! 5255: continue
! 5256: ;;
! 5257: prog)
! 5258: if test "$pass" != link; then
! 5259: deplibs="$deplib $deplibs"
! 5260: else
! 5261: compile_deplibs="$deplib $compile_deplibs"
! 5262: finalize_deplibs="$deplib $finalize_deplibs"
! 5263: fi
! 5264: continue
! 5265: ;;
! 5266: esac # linkmode
! 5267: ;; # *.$libext
! 5268: *.lo | *.$objext)
! 5269: if test "$pass" = conv; then
! 5270: deplibs="$deplib $deplibs"
! 5271: elif test "$linkmode" = prog; then
! 5272: if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
! 5273: # If there is no dlopen support or we're linking statically,
! 5274: # we need to preload.
! 5275: newdlprefiles="$newdlprefiles $deplib"
! 5276: compile_deplibs="$deplib $compile_deplibs"
! 5277: finalize_deplibs="$deplib $finalize_deplibs"
! 5278: else
! 5279: newdlfiles="$newdlfiles $deplib"
! 5280: fi
! 5281: fi
! 5282: continue
! 5283: ;;
! 5284: %DEPLIBS%)
! 5285: alldeplibs=yes
! 5286: continue
! 5287: ;;
! 5288: esac # case $deplib
! 5289:
! 5290: if test "$found" = yes || test -f "$lib"; then :
! 5291: else
! 5292: func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
! 5293: fi
! 5294:
! 5295: # Check to see that this really is a libtool archive.
! 5296: func_lalib_unsafe_p "$lib" \
! 5297: || func_fatal_error "\`$lib' is not a valid libtool archive"
! 5298:
! 5299: func_dirname "$lib" "" "."
! 5300: ladir="$func_dirname_result"
! 5301:
! 5302: dlname=
! 5303: dlopen=
! 5304: dlpreopen=
! 5305: libdir=
! 5306: library_names=
! 5307: old_library=
! 5308: inherited_linker_flags=
! 5309: # If the library was installed with an old release of libtool,
! 5310: # it will not redefine variables installed, or shouldnotlink
! 5311: installed=yes
! 5312: shouldnotlink=no
! 5313: avoidtemprpath=
! 5314:
! 5315:
! 5316: # Read the .la file
! 5317: func_source "$lib"
! 5318:
! 5319: # Convert "-framework foo" to "foo.ltframework"
! 5320: if test -n "$inherited_linker_flags"; then
! 5321: tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
! 5322: for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
! 5323: case " $new_inherited_linker_flags " in
! 5324: *" $tmp_inherited_linker_flag "*) ;;
! 5325: *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
! 5326: esac
! 5327: done
! 5328: fi
! 5329: dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 5330: if test "$linkmode,$pass" = "lib,link" ||
! 5331: test "$linkmode,$pass" = "prog,scan" ||
! 5332: { test "$linkmode" != prog && test "$linkmode" != lib; }; then
! 5333: test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
! 5334: test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
! 5335: fi
! 5336:
! 5337: if test "$pass" = conv; then
! 5338: # Only check for convenience libraries
! 5339: deplibs="$lib $deplibs"
! 5340: if test -z "$libdir"; then
! 5341: if test -z "$old_library"; then
! 5342: func_fatal_error "cannot find name of link library for \`$lib'"
! 5343: fi
! 5344: # It is a libtool convenience library, so add in its objects.
! 5345: convenience="$convenience $ladir/$objdir/$old_library"
! 5346: old_convenience="$old_convenience $ladir/$objdir/$old_library"
! 5347: elif test "$linkmode" != prog && test "$linkmode" != lib; then
! 5348: func_fatal_error "\`$lib' is not a convenience library"
! 5349: fi
! 5350: tmp_libs=
! 5351: for deplib in $dependency_libs; do
! 5352: deplibs="$deplib $deplibs"
! 5353: if $opt_duplicate_deps ; then
! 5354: case "$tmp_libs " in
! 5355: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 5356: esac
! 5357: fi
! 5358: tmp_libs="$tmp_libs $deplib"
! 5359: done
! 5360: continue
! 5361: fi # $pass = conv
! 5362:
! 5363:
! 5364: # Get the name of the library we link against.
! 5365: linklib=
! 5366: for l in $old_library $library_names; do
! 5367: linklib="$l"
! 5368: done
! 5369: if test -z "$linklib"; then
! 5370: func_fatal_error "cannot find name of link library for \`$lib'"
! 5371: fi
! 5372:
! 5373: # This library was specified with -dlopen.
! 5374: if test "$pass" = dlopen; then
! 5375: if test -z "$libdir"; then
! 5376: func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
! 5377: fi
! 5378: if test -z "$dlname" ||
! 5379: test "$dlopen_support" != yes ||
! 5380: test "$build_libtool_libs" = no; then
! 5381: # If there is no dlname, no dlopen support or we're linking
! 5382: # statically, we need to preload. We also need to preload any
! 5383: # dependent libraries so libltdl's deplib preloader doesn't
! 5384: # bomb out in the load deplibs phase.
! 5385: dlprefiles="$dlprefiles $lib $dependency_libs"
! 5386: else
! 5387: newdlfiles="$newdlfiles $lib"
! 5388: fi
! 5389: continue
! 5390: fi # $pass = dlopen
! 5391:
! 5392: # We need an absolute path.
! 5393: case $ladir in
! 5394: [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
! 5395: *)
! 5396: abs_ladir=`cd "$ladir" && pwd`
! 5397: if test -z "$abs_ladir"; then
! 5398: func_warning "cannot determine absolute directory name of \`$ladir'"
! 5399: func_warning "passing it literally to the linker, although it might fail"
! 5400: abs_ladir="$ladir"
! 5401: fi
! 5402: ;;
! 5403: esac
! 5404: func_basename "$lib"
! 5405: laname="$func_basename_result"
! 5406:
! 5407: # Find the relevant object directory and library name.
! 5408: if test "X$installed" = Xyes; then
! 5409: if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
! 5410: func_warning "library \`$lib' was moved."
! 5411: dir="$ladir"
! 5412: absdir="$abs_ladir"
! 5413: libdir="$abs_ladir"
! 5414: else
! 5415: dir="$libdir"
! 5416: absdir="$libdir"
! 5417: fi
! 5418: test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
! 5419: else
! 5420: if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
! 5421: dir="$ladir"
! 5422: absdir="$abs_ladir"
! 5423: # Remove this search path later
! 5424: notinst_path="$notinst_path $abs_ladir"
! 5425: else
! 5426: dir="$ladir/$objdir"
! 5427: absdir="$abs_ladir/$objdir"
! 5428: # Remove this search path later
! 5429: notinst_path="$notinst_path $abs_ladir"
! 5430: fi
! 5431: fi # $installed = yes
! 5432: func_stripname 'lib' '.la' "$laname"
! 5433: name=$func_stripname_result
! 5434:
! 5435: # This library was specified with -dlpreopen.
! 5436: if test "$pass" = dlpreopen; then
! 5437: if test -z "$libdir" && test "$linkmode" = prog; then
! 5438: func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
! 5439: fi
! 5440: # Prefer using a static library (so that no silly _DYNAMIC symbols
! 5441: # are required to link).
! 5442: if test -n "$old_library"; then
! 5443: newdlprefiles="$newdlprefiles $dir/$old_library"
! 5444: # Keep a list of preopened convenience libraries to check
! 5445: # that they are being used correctly in the link pass.
! 5446: test -z "$libdir" && \
! 5447: dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
! 5448: # Otherwise, use the dlname, so that lt_dlopen finds it.
! 5449: elif test -n "$dlname"; then
! 5450: newdlprefiles="$newdlprefiles $dir/$dlname"
! 5451: else
! 5452: newdlprefiles="$newdlprefiles $dir/$linklib"
! 5453: fi
! 5454: fi # $pass = dlpreopen
! 5455:
! 5456: if test -z "$libdir"; then
! 5457: # Link the convenience library
! 5458: if test "$linkmode" = lib; then
! 5459: deplibs="$dir/$old_library $deplibs"
! 5460: elif test "$linkmode,$pass" = "prog,link"; then
! 5461: compile_deplibs="$dir/$old_library $compile_deplibs"
! 5462: finalize_deplibs="$dir/$old_library $finalize_deplibs"
! 5463: else
! 5464: deplibs="$lib $deplibs" # used for prog,scan pass
! 5465: fi
! 5466: continue
! 5467: fi
! 5468:
! 5469:
! 5470: if test "$linkmode" = prog && test "$pass" != link; then
! 5471: newlib_search_path="$newlib_search_path $ladir"
! 5472: deplibs="$lib $deplibs"
! 5473:
! 5474: linkalldeplibs=no
! 5475: if test "$link_all_deplibs" != no || test -z "$library_names" ||
! 5476: test "$build_libtool_libs" = no; then
! 5477: linkalldeplibs=yes
! 5478: fi
! 5479:
! 5480: tmp_libs=
! 5481: for deplib in $dependency_libs; do
! 5482: case $deplib in
! 5483: -L*) func_stripname '-L' '' "$deplib"
! 5484: newlib_search_path="$newlib_search_path $func_stripname_result"
! 5485: ;;
! 5486: esac
! 5487: # Need to link against all dependency_libs?
! 5488: if test "$linkalldeplibs" = yes; then
! 5489: deplibs="$deplib $deplibs"
! 5490: else
! 5491: # Need to hardcode shared library paths
! 5492: # or/and link against static libraries
! 5493: newdependency_libs="$deplib $newdependency_libs"
! 5494: fi
! 5495: if $opt_duplicate_deps ; then
! 5496: case "$tmp_libs " in
! 5497: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 5498: esac
! 5499: fi
! 5500: tmp_libs="$tmp_libs $deplib"
! 5501: done # for deplib
! 5502: continue
! 5503: fi # $linkmode = prog...
! 5504:
! 5505: if test "$linkmode,$pass" = "prog,link"; then
! 5506: if test -n "$library_names" &&
! 5507: { { test "$prefer_static_libs" = no ||
! 5508: test "$prefer_static_libs,$installed" = "built,yes"; } ||
! 5509: test -z "$old_library"; }; then
! 5510: # We need to hardcode the library path
! 5511: if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
! 5512: # Make sure the rpath contains only unique directories.
! 5513: case "$temp_rpath:" in
! 5514: *"$absdir:"*) ;;
! 5515: *) temp_rpath="$temp_rpath$absdir:" ;;
! 5516: esac
! 5517: fi
! 5518:
! 5519: # Hardcode the library path.
! 5520: # Skip directories that are in the system default run-time
! 5521: # search path.
! 5522: case " $sys_lib_dlsearch_path " in
! 5523: *" $absdir "*) ;;
! 5524: *)
! 5525: case "$compile_rpath " in
! 5526: *" $absdir "*) ;;
! 5527: *) compile_rpath="$compile_rpath $absdir"
! 5528: esac
! 5529: ;;
! 5530: esac
! 5531: case " $sys_lib_dlsearch_path " in
! 5532: *" $libdir "*) ;;
! 5533: *)
! 5534: case "$finalize_rpath " in
! 5535: *" $libdir "*) ;;
! 5536: *) finalize_rpath="$finalize_rpath $libdir"
! 5537: esac
! 5538: ;;
! 5539: esac
! 5540: fi # $linkmode,$pass = prog,link...
! 5541:
! 5542: if test "$alldeplibs" = yes &&
! 5543: { test "$deplibs_check_method" = pass_all ||
! 5544: { test "$build_libtool_libs" = yes &&
! 5545: test -n "$library_names"; }; }; then
! 5546: # We only need to search for static libraries
! 5547: continue
! 5548: fi
! 5549: fi
! 5550:
! 5551: link_static=no # Whether the deplib will be linked statically
! 5552: use_static_libs=$prefer_static_libs
! 5553: if test "$use_static_libs" = built && test "$installed" = yes; then
! 5554: use_static_libs=no
! 5555: fi
! 5556: if test -n "$library_names" &&
! 5557: { test "$use_static_libs" = no || test -z "$old_library"; }; then
! 5558: case $host in
! 5559: *cygwin* | *mingw* | *cegcc*)
! 5560: # No point in relinking DLLs because paths are not encoded
! 5561: notinst_deplibs="$notinst_deplibs $lib"
! 5562: need_relink=no
! 5563: ;;
! 5564: *)
! 5565: if test "$installed" = no; then
! 5566: notinst_deplibs="$notinst_deplibs $lib"
! 5567: need_relink=yes
! 5568: fi
! 5569: ;;
! 5570: esac
! 5571: # This is a shared library
! 5572:
! 5573: # Warn about portability, can't link against -module's on some
! 5574: # systems (darwin). Don't bleat about dlopened modules though!
! 5575: dlopenmodule=""
! 5576: for dlpremoduletest in $dlprefiles; do
! 5577: if test "X$dlpremoduletest" = "X$lib"; then
! 5578: dlopenmodule="$dlpremoduletest"
! 5579: break
! 5580: fi
! 5581: done
! 5582: if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
! 5583: $ECHO
! 5584: if test "$linkmode" = prog; then
! 5585: $ECHO "*** Warning: Linking the executable $output against the loadable module"
! 5586: else
! 5587: $ECHO "*** Warning: Linking the shared library $output against the loadable module"
! 5588: fi
! 5589: $ECHO "*** $linklib is not portable!"
! 5590: fi
! 5591: if test "$linkmode" = lib &&
! 5592: test "$hardcode_into_libs" = yes; then
! 5593: # Hardcode the library path.
! 5594: # Skip directories that are in the system default run-time
! 5595: # search path.
! 5596: case " $sys_lib_dlsearch_path " in
! 5597: *" $absdir "*) ;;
! 5598: *)
! 5599: case "$compile_rpath " in
! 5600: *" $absdir "*) ;;
! 5601: *) compile_rpath="$compile_rpath $absdir"
! 5602: esac
! 5603: ;;
! 5604: esac
! 5605: case " $sys_lib_dlsearch_path " in
! 5606: *" $libdir "*) ;;
! 5607: *)
! 5608: case "$finalize_rpath " in
! 5609: *" $libdir "*) ;;
! 5610: *) finalize_rpath="$finalize_rpath $libdir"
! 5611: esac
! 5612: ;;
! 5613: esac
! 5614: fi
! 5615:
! 5616: if test -n "$old_archive_from_expsyms_cmds"; then
! 5617: # figure out the soname
! 5618: set dummy $library_names
! 5619: shift
! 5620: realname="$1"
! 5621: shift
! 5622: libname=`eval "\\$ECHO \"$libname_spec\""`
! 5623: # use dlname if we got it. it's perfectly good, no?
! 5624: if test -n "$dlname"; then
! 5625: soname="$dlname"
! 5626: elif test -n "$soname_spec"; then
! 5627: # bleh windows
! 5628: case $host in
! 5629: *cygwin* | mingw* | *cegcc*)
! 5630: func_arith $current - $age
! 5631: major=$func_arith_result
! 5632: versuffix="-$major"
! 5633: ;;
! 5634: esac
! 5635: eval soname=\"$soname_spec\"
! 5636: else
! 5637: soname="$realname"
! 5638: fi
! 5639:
! 5640: # Make a new name for the extract_expsyms_cmds to use
! 5641: soroot="$soname"
! 5642: func_basename "$soroot"
! 5643: soname="$func_basename_result"
! 5644: func_stripname 'lib' '.dll' "$soname"
! 5645: newlib=libimp-$func_stripname_result.a
! 5646:
! 5647: # If the library has no export list, then create one now
! 5648: if test -f "$output_objdir/$soname-def"; then :
! 5649: else
! 5650: func_verbose "extracting exported symbol list from \`$soname'"
! 5651: func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
! 5652: fi
! 5653:
! 5654: # Create $newlib
! 5655: if test -f "$output_objdir/$newlib"; then :; else
! 5656: func_verbose "generating import library for \`$soname'"
! 5657: func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
! 5658: fi
! 5659: # make sure the library variables are pointing to the new library
! 5660: dir=$output_objdir
! 5661: linklib=$newlib
! 5662: fi # test -n "$old_archive_from_expsyms_cmds"
! 5663:
! 5664: if test "$linkmode" = prog || test "$mode" != relink; then
! 5665: add_shlibpath=
! 5666: add_dir=
! 5667: add=
! 5668: lib_linked=yes
! 5669: case $hardcode_action in
! 5670: immediate | unsupported)
! 5671: if test "$hardcode_direct" = no; then
! 5672: add="$dir/$linklib"
! 5673: case $host in
! 5674: *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
! 5675: *-*-sysv4*uw2*) add_dir="-L$dir" ;;
! 5676: *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
! 5677: *-*-unixware7*) add_dir="-L$dir" ;;
! 5678: *-*-darwin* )
! 5679: # if the lib is a (non-dlopened) module then we can not
! 5680: # link against it, someone is ignoring the earlier warnings
! 5681: if /usr/bin/file -L $add 2> /dev/null |
! 5682: $GREP ": [^:]* bundle" >/dev/null ; then
! 5683: if test "X$dlopenmodule" != "X$lib"; then
! 5684: $ECHO "*** Warning: lib $linklib is a module, not a shared library"
! 5685: if test -z "$old_library" ; then
! 5686: $ECHO
! 5687: $ECHO "*** And there doesn't seem to be a static archive available"
! 5688: $ECHO "*** The link will probably fail, sorry"
! 5689: else
! 5690: add="$dir/$old_library"
! 5691: fi
! 5692: elif test -n "$old_library"; then
! 5693: add="$dir/$old_library"
! 5694: fi
! 5695: fi
! 5696: esac
! 5697: elif test "$hardcode_minus_L" = no; then
! 5698: case $host in
! 5699: *-*-sunos*) add_shlibpath="$dir" ;;
! 5700: esac
! 5701: add_dir="-L$dir"
! 5702: add="-l$name"
! 5703: elif test "$hardcode_shlibpath_var" = no; then
! 5704: add_shlibpath="$dir"
! 5705: add="-l$name"
! 5706: else
! 5707: lib_linked=no
! 5708: fi
! 5709: ;;
! 5710: relink)
! 5711: if test "$hardcode_direct" = yes &&
! 5712: test "$hardcode_direct_absolute" = no; then
! 5713: add="$dir/$linklib"
! 5714: elif test "$hardcode_minus_L" = yes; then
! 5715: add_dir="-L$dir"
! 5716: # Try looking first in the location we're being installed to.
! 5717: if test -n "$inst_prefix_dir"; then
! 5718: case $libdir in
! 5719: [\\/]*)
! 5720: add_dir="$add_dir -L$inst_prefix_dir$libdir"
! 5721: ;;
! 5722: esac
! 5723: fi
! 5724: add="-l$name"
! 5725: elif test "$hardcode_shlibpath_var" = yes; then
! 5726: add_shlibpath="$dir"
! 5727: add="-l$name"
! 5728: else
! 5729: lib_linked=no
! 5730: fi
! 5731: ;;
! 5732: *) lib_linked=no ;;
! 5733: esac
! 5734:
! 5735: if test "$lib_linked" != yes; then
! 5736: func_fatal_configuration "unsupported hardcode properties"
! 5737: fi
! 5738:
! 5739: if test -n "$add_shlibpath"; then
! 5740: case :$compile_shlibpath: in
! 5741: *":$add_shlibpath:"*) ;;
! 5742: *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
! 5743: esac
! 5744: fi
! 5745: if test "$linkmode" = prog; then
! 5746: test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
! 5747: test -n "$add" && compile_deplibs="$add $compile_deplibs"
! 5748: else
! 5749: test -n "$add_dir" && deplibs="$add_dir $deplibs"
! 5750: test -n "$add" && deplibs="$add $deplibs"
! 5751: if test "$hardcode_direct" != yes &&
! 5752: test "$hardcode_minus_L" != yes &&
! 5753: test "$hardcode_shlibpath_var" = yes; then
! 5754: case :$finalize_shlibpath: in
! 5755: *":$libdir:"*) ;;
! 5756: *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
! 5757: esac
! 5758: fi
! 5759: fi
! 5760: fi
! 5761:
! 5762: if test "$linkmode" = prog || test "$mode" = relink; then
! 5763: add_shlibpath=
! 5764: add_dir=
! 5765: add=
! 5766: # Finalize command for both is simple: just hardcode it.
! 5767: if test "$hardcode_direct" = yes &&
! 5768: test "$hardcode_direct_absolute" = no; then
! 5769: add="$libdir/$linklib"
! 5770: elif test "$hardcode_minus_L" = yes; then
! 5771: add_dir="-L$libdir"
! 5772: add="-l$name"
! 5773: elif test "$hardcode_shlibpath_var" = yes; then
! 5774: case :$finalize_shlibpath: in
! 5775: *":$libdir:"*) ;;
! 5776: *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
! 5777: esac
! 5778: add="-l$name"
! 5779: elif test "$hardcode_automatic" = yes; then
! 5780: if test -n "$inst_prefix_dir" &&
! 5781: test -f "$inst_prefix_dir$libdir/$linklib" ; then
! 5782: add="$inst_prefix_dir$libdir/$linklib"
! 5783: else
! 5784: add="$libdir/$linklib"
! 5785: fi
! 5786: else
! 5787: # We cannot seem to hardcode it, guess we'll fake it.
! 5788: add_dir="-L$libdir"
! 5789: # Try looking first in the location we're being installed to.
! 5790: if test -n "$inst_prefix_dir"; then
! 5791: case $libdir in
! 5792: [\\/]*)
! 5793: add_dir="$add_dir -L$inst_prefix_dir$libdir"
! 5794: ;;
! 5795: esac
! 5796: fi
! 5797: add="-l$name"
! 5798: fi
! 5799:
! 5800: if test "$linkmode" = prog; then
! 5801: test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
! 5802: test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
! 5803: else
! 5804: test -n "$add_dir" && deplibs="$add_dir $deplibs"
! 5805: test -n "$add" && deplibs="$add $deplibs"
! 5806: fi
! 5807: fi
! 5808: elif test "$linkmode" = prog; then
! 5809: # Here we assume that one of hardcode_direct or hardcode_minus_L
! 5810: # is not unsupported. This is valid on all known static and
! 5811: # shared platforms.
! 5812: if test "$hardcode_direct" != unsupported; then
! 5813: test -n "$old_library" && linklib="$old_library"
! 5814: compile_deplibs="$dir/$linklib $compile_deplibs"
! 5815: finalize_deplibs="$dir/$linklib $finalize_deplibs"
! 5816: else
! 5817: compile_deplibs="-l$name -L$dir $compile_deplibs"
! 5818: finalize_deplibs="-l$name -L$dir $finalize_deplibs"
! 5819: fi
! 5820: elif test "$build_libtool_libs" = yes; then
! 5821: # Not a shared library
! 5822: if test "$deplibs_check_method" != pass_all; then
! 5823: # We're trying link a shared library against a static one
! 5824: # but the system doesn't support it.
! 5825:
! 5826: # Just print a warning and add the library to dependency_libs so
! 5827: # that the program can be linked against the static library.
! 5828: $ECHO
! 5829: $ECHO "*** Warning: This system can not link to static lib archive $lib."
! 5830: $ECHO "*** I have the capability to make that library automatically link in when"
! 5831: $ECHO "*** you link to this library. But I can only do this if you have a"
! 5832: $ECHO "*** shared version of the library, which you do not appear to have."
! 5833: if test "$module" = yes; then
! 5834: $ECHO "*** But as you try to build a module library, libtool will still create "
! 5835: $ECHO "*** a static module, that should work as long as the dlopening application"
! 5836: $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
! 5837: if test -z "$global_symbol_pipe"; then
! 5838: $ECHO
! 5839: $ECHO "*** However, this would only work if libtool was able to extract symbol"
! 5840: $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
! 5841: $ECHO "*** not find such a program. So, this module is probably useless."
! 5842: $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
! 5843: fi
! 5844: if test "$build_old_libs" = no; then
! 5845: build_libtool_libs=module
! 5846: build_old_libs=yes
! 5847: else
! 5848: build_libtool_libs=no
! 5849: fi
! 5850: fi
! 5851: else
! 5852: deplibs="$dir/$old_library $deplibs"
! 5853: link_static=yes
! 5854: fi
! 5855: fi # link shared/static library?
! 5856:
! 5857: if test "$linkmode" = lib; then
! 5858: if test -n "$dependency_libs" &&
! 5859: { test "$hardcode_into_libs" != yes ||
! 5860: test "$build_old_libs" = yes ||
! 5861: test "$link_static" = yes; }; then
! 5862: # Extract -R from dependency_libs
! 5863: temp_deplibs=
! 5864: for libdir in $dependency_libs; do
! 5865: case $libdir in
! 5866: -R*) func_stripname '-R' '' "$libdir"
! 5867: temp_xrpath=$func_stripname_result
! 5868: case " $xrpath " in
! 5869: *" $temp_xrpath "*) ;;
! 5870: *) xrpath="$xrpath $temp_xrpath";;
! 5871: esac;;
! 5872: *) temp_deplibs="$temp_deplibs $libdir";;
! 5873: esac
! 5874: done
! 5875: dependency_libs="$temp_deplibs"
! 5876: fi
! 5877:
! 5878: newlib_search_path="$newlib_search_path $absdir"
! 5879: # Link against this library
! 5880: test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
! 5881: # ... and its dependency_libs
! 5882: tmp_libs=
! 5883: for deplib in $dependency_libs; do
! 5884: newdependency_libs="$deplib $newdependency_libs"
! 5885: if $opt_duplicate_deps ; then
! 5886: case "$tmp_libs " in
! 5887: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 5888: esac
! 5889: fi
! 5890: tmp_libs="$tmp_libs $deplib"
! 5891: done
! 5892:
! 5893: if test "$link_all_deplibs" != no; then
! 5894: # Add the search paths of all dependency libraries
! 5895: for deplib in $dependency_libs; do
! 5896: case $deplib in
! 5897: -L*) path="$deplib" ;;
! 5898: *.la)
! 5899: func_dirname "$deplib" "" "."
! 5900: dir="$func_dirname_result"
! 5901: # We need an absolute path.
! 5902: case $dir in
! 5903: [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
! 5904: *)
! 5905: absdir=`cd "$dir" && pwd`
! 5906: if test -z "$absdir"; then
! 5907: func_warning "cannot determine absolute directory name of \`$dir'"
! 5908: absdir="$dir"
! 5909: fi
! 5910: ;;
! 5911: esac
! 5912: if $GREP "^installed=no" $deplib > /dev/null; then
! 5913: case $host in
! 5914: *-*-darwin*)
! 5915: depdepl=
! 5916: eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
! 5917: if test -n "$deplibrary_names" ; then
! 5918: for tmp in $deplibrary_names ; do
! 5919: depdepl=$tmp
! 5920: done
! 5921: if test -f "$absdir/$objdir/$depdepl" ; then
! 5922: depdepl="$absdir/$objdir/$depdepl"
! 5923: darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
! 5924: if test -z "$darwin_install_name"; then
! 5925: darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
! 5926: fi
! 5927: compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
! 5928: linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
! 5929: path=
! 5930: fi
! 5931: fi
! 5932: ;;
! 5933: *)
! 5934: path="-L$absdir/$objdir"
! 5935: ;;
! 5936: esac
! 5937: else
! 5938: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
! 5939: test -z "$libdir" && \
! 5940: func_fatal_error "\`$deplib' is not a valid libtool archive"
! 5941: test "$absdir" != "$libdir" && \
! 5942: func_warning "\`$deplib' seems to be moved"
! 5943:
! 5944: path="-L$absdir"
! 5945: fi
! 5946: ;;
! 5947: esac
! 5948: case " $deplibs " in
! 5949: *" $path "*) ;;
! 5950: *) deplibs="$path $deplibs" ;;
! 5951: esac
! 5952: done
! 5953: fi # link_all_deplibs != no
! 5954: fi # linkmode = lib
! 5955: done # for deplib in $libs
! 5956: if test "$pass" = link; then
! 5957: if test "$linkmode" = "prog"; then
! 5958: compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
! 5959: finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
! 5960: else
! 5961: compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 5962: fi
! 5963: fi
! 5964: dependency_libs="$newdependency_libs"
! 5965: if test "$pass" = dlpreopen; then
! 5966: # Link the dlpreopened libraries before other libraries
! 5967: for deplib in $save_deplibs; do
! 5968: deplibs="$deplib $deplibs"
! 5969: done
! 5970: fi
! 5971: if test "$pass" != dlopen; then
! 5972: if test "$pass" != conv; then
! 5973: # Make sure lib_search_path contains only unique directories.
! 5974: lib_search_path=
! 5975: for dir in $newlib_search_path; do
! 5976: case "$lib_search_path " in
! 5977: *" $dir "*) ;;
! 5978: *) lib_search_path="$lib_search_path $dir" ;;
! 5979: esac
! 5980: done
! 5981: newlib_search_path=
! 5982: fi
! 5983:
! 5984: if test "$linkmode,$pass" != "prog,link"; then
! 5985: vars="deplibs"
! 5986: else
! 5987: vars="compile_deplibs finalize_deplibs"
! 5988: fi
! 5989: for var in $vars dependency_libs; do
! 5990: # Add libraries to $var in reverse order
! 5991: eval tmp_libs=\"\$$var\"
! 5992: new_libs=
! 5993: for deplib in $tmp_libs; do
! 5994: # FIXME: Pedantically, this is the right thing to do, so
! 5995: # that some nasty dependency loop isn't accidentally
! 5996: # broken:
! 5997: #new_libs="$deplib $new_libs"
! 5998: # Pragmatically, this seems to cause very few problems in
! 5999: # practice:
! 6000: case $deplib in
! 6001: -L*) new_libs="$deplib $new_libs" ;;
! 6002: -R*) ;;
! 6003: *)
! 6004: # And here is the reason: when a library appears more
! 6005: # than once as an explicit dependence of a library, or
! 6006: # is implicitly linked in more than once by the
! 6007: # compiler, it is considered special, and multiple
! 6008: # occurrences thereof are not removed. Compare this
! 6009: # with having the same library being listed as a
! 6010: # dependency of multiple other libraries: in this case,
! 6011: # we know (pedantically, we assume) the library does not
! 6012: # need to be listed more than once, so we keep only the
! 6013: # last copy. This is not always right, but it is rare
! 6014: # enough that we require users that really mean to play
! 6015: # such unportable linking tricks to link the library
! 6016: # using -Wl,-lname, so that libtool does not consider it
! 6017: # for duplicate removal.
! 6018: case " $specialdeplibs " in
! 6019: *" $deplib "*) new_libs="$deplib $new_libs" ;;
! 6020: *)
! 6021: case " $new_libs " in
! 6022: *" $deplib "*) ;;
! 6023: *) new_libs="$deplib $new_libs" ;;
! 6024: esac
! 6025: ;;
! 6026: esac
! 6027: ;;
! 6028: esac
! 6029: done
! 6030: tmp_libs=
! 6031: for deplib in $new_libs; do
! 6032: case $deplib in
! 6033: -L*)
! 6034: case " $tmp_libs " in
! 6035: *" $deplib "*) ;;
! 6036: *) tmp_libs="$tmp_libs $deplib" ;;
! 6037: esac
! 6038: ;;
! 6039: *) tmp_libs="$tmp_libs $deplib" ;;
! 6040: esac
! 6041: done
! 6042: eval $var=\"$tmp_libs\"
! 6043: done # for var
! 6044: fi
! 6045: # Last step: remove runtime libs from dependency_libs
! 6046: # (they stay in deplibs)
! 6047: tmp_libs=
! 6048: for i in $dependency_libs ; do
! 6049: case " $predeps $postdeps $compiler_lib_search_path " in
! 6050: *" $i "*)
! 6051: i=""
! 6052: ;;
! 6053: esac
! 6054: if test -n "$i" ; then
! 6055: tmp_libs="$tmp_libs $i"
! 6056: fi
! 6057: done
! 6058: dependency_libs=$tmp_libs
! 6059: done # for pass
! 6060: if test "$linkmode" = prog; then
! 6061: dlfiles="$newdlfiles"
! 6062: fi
! 6063: if test "$linkmode" = prog || test "$linkmode" = lib; then
! 6064: dlprefiles="$newdlprefiles"
! 6065: fi
! 6066:
! 6067: case $linkmode in
! 6068: oldlib)
! 6069: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 6070: func_warning "\`-dlopen' is ignored for archives"
! 6071: fi
! 6072:
! 6073: case " $deplibs" in
! 6074: *\ -l* | *\ -L*)
! 6075: func_warning "\`-l' and \`-L' are ignored for archives" ;;
! 6076: esac
! 6077:
! 6078: test -n "$rpath" && \
! 6079: func_warning "\`-rpath' is ignored for archives"
! 6080:
! 6081: test -n "$xrpath" && \
! 6082: func_warning "\`-R' is ignored for archives"
! 6083:
! 6084: test -n "$vinfo" && \
! 6085: func_warning "\`-version-info/-version-number' is ignored for archives"
! 6086:
! 6087: test -n "$release" && \
! 6088: func_warning "\`-release' is ignored for archives"
! 6089:
! 6090: test -n "$export_symbols$export_symbols_regex" && \
! 6091: func_warning "\`-export-symbols' is ignored for archives"
! 6092:
! 6093: # Now set the variables for building old libraries.
! 6094: build_libtool_libs=no
! 6095: oldlibs="$output"
! 6096: objs="$objs$old_deplibs"
! 6097: ;;
! 6098:
! 6099: lib)
! 6100: # Make sure we only generate libraries of the form `libNAME.la'.
! 6101: case $outputname in
! 6102: lib*)
! 6103: func_stripname 'lib' '.la' "$outputname"
! 6104: name=$func_stripname_result
! 6105: eval shared_ext=\"$shrext_cmds\"
! 6106: eval libname=\"$libname_spec\"
! 6107: ;;
! 6108: *)
! 6109: test "$module" = no && \
! 6110: func_fatal_help "libtool library \`$output' must begin with \`lib'"
! 6111:
! 6112: if test "$need_lib_prefix" != no; then
! 6113: # Add the "lib" prefix for modules if required
! 6114: func_stripname '' '.la' "$outputname"
! 6115: name=$func_stripname_result
! 6116: eval shared_ext=\"$shrext_cmds\"
! 6117: eval libname=\"$libname_spec\"
! 6118: else
! 6119: func_stripname '' '.la' "$outputname"
! 6120: libname=$func_stripname_result
! 6121: fi
! 6122: ;;
! 6123: esac
! 6124:
! 6125: if test -n "$objs"; then
! 6126: if test "$deplibs_check_method" != pass_all; then
! 6127: func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
! 6128: else
! 6129: $ECHO
! 6130: $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
! 6131: $ECHO "*** objects $objs is not portable!"
! 6132: libobjs="$libobjs $objs"
! 6133: fi
! 6134: fi
! 6135:
! 6136: test "$dlself" != no && \
! 6137: func_warning "\`-dlopen self' is ignored for libtool libraries"
! 6138:
! 6139: set dummy $rpath
! 6140: shift
! 6141: test "$#" -gt 1 && \
! 6142: func_warning "ignoring multiple \`-rpath's for a libtool library"
! 6143:
! 6144: install_libdir="$1"
! 6145:
! 6146: oldlibs=
! 6147: if test -z "$rpath"; then
! 6148: if test "$build_libtool_libs" = yes; then
! 6149: # Building a libtool convenience library.
! 6150: # Some compilers have problems with a `.al' extension so
! 6151: # convenience libraries should have the same extension an
! 6152: # archive normally would.
! 6153: oldlibs="$output_objdir/$libname.$libext $oldlibs"
! 6154: build_libtool_libs=convenience
! 6155: build_old_libs=yes
! 6156: fi
! 6157:
! 6158: test -n "$vinfo" && \
! 6159: func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
! 6160:
! 6161: test -n "$release" && \
! 6162: func_warning "\`-release' is ignored for convenience libraries"
! 6163: else
! 6164:
! 6165: # Parse the version information argument.
! 6166: save_ifs="$IFS"; IFS=':'
! 6167: set dummy $vinfo 0 0 0
! 6168: shift
! 6169: IFS="$save_ifs"
! 6170:
! 6171: test -n "$7" && \
! 6172: func_fatal_help "too many parameters to \`-version-info'"
! 6173:
! 6174: # convert absolute version numbers to libtool ages
! 6175: # this retains compatibility with .la files and attempts
! 6176: # to make the code below a bit more comprehensible
! 6177:
! 6178: case $vinfo_number in
! 6179: yes)
! 6180: number_major="$1"
! 6181: number_minor="$2"
! 6182: number_revision="$3"
! 6183: #
! 6184: # There are really only two kinds -- those that
! 6185: # use the current revision as the major version
! 6186: # and those that subtract age and use age as
! 6187: # a minor version. But, then there is irix
! 6188: # which has an extra 1 added just for fun
! 6189: #
! 6190: case $version_type in
! 6191: darwin|linux|osf|windows|none)
! 6192: func_arith $number_major + $number_minor
! 6193: current=$func_arith_result
! 6194: age="$number_minor"
! 6195: revision="$number_revision"
! 6196: ;;
! 6197: freebsd-aout|freebsd-elf|sunos)
! 6198: current="$number_major"
! 6199: revision="$number_minor"
! 6200: age="0"
! 6201: ;;
! 6202: irix|nonstopux)
! 6203: func_arith $number_major + $number_minor
! 6204: current=$func_arith_result
! 6205: age="$number_minor"
! 6206: revision="$number_minor"
! 6207: lt_irix_increment=no
! 6208: ;;
! 6209: esac
! 6210: ;;
! 6211: no)
! 6212: current="$1"
! 6213: revision="$2"
! 6214: age="$3"
! 6215: ;;
! 6216: esac
! 6217:
! 6218: # Check that each of the things are valid numbers.
! 6219: case $current in
! 6220: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 6221: *)
! 6222: func_error "CURRENT \`$current' must be a nonnegative integer"
! 6223: func_fatal_error "\`$vinfo' is not valid version information"
! 6224: ;;
! 6225: esac
! 6226:
! 6227: case $revision in
! 6228: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 6229: *)
! 6230: func_error "REVISION \`$revision' must be a nonnegative integer"
! 6231: func_fatal_error "\`$vinfo' is not valid version information"
! 6232: ;;
! 6233: esac
! 6234:
! 6235: case $age in
! 6236: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 6237: *)
! 6238: func_error "AGE \`$age' must be a nonnegative integer"
! 6239: func_fatal_error "\`$vinfo' is not valid version information"
! 6240: ;;
! 6241: esac
! 6242:
! 6243: if test "$age" -gt "$current"; then
! 6244: func_error "AGE \`$age' is greater than the current interface number \`$current'"
! 6245: func_fatal_error "\`$vinfo' is not valid version information"
! 6246: fi
! 6247:
! 6248: # Calculate the version variables.
! 6249: major=
! 6250: versuffix=
! 6251: verstring=
! 6252: case $version_type in
! 6253: none) ;;
! 6254:
! 6255: darwin)
! 6256: # Like Linux, but with the current version available in
! 6257: # verstring for coding it into the library header
! 6258: func_arith $current - $age
! 6259: major=.$func_arith_result
! 6260: versuffix="$major.$age.$revision"
! 6261: # Darwin ld doesn't like 0 for these options...
! 6262: func_arith $current + 1
! 6263: minor_current=$func_arith_result
! 6264: xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
! 6265: verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
! 6266: ;;
! 6267:
! 6268: freebsd-aout)
! 6269: major=".$current"
! 6270: versuffix=".$current.$revision";
! 6271: ;;
! 6272:
! 6273: freebsd-elf)
! 6274: major=".$current"
! 6275: versuffix=".$current"
! 6276: ;;
! 6277:
! 6278: irix | nonstopux)
! 6279: if test "X$lt_irix_increment" = "Xno"; then
! 6280: func_arith $current - $age
! 6281: else
! 6282: func_arith $current - $age + 1
! 6283: fi
! 6284: major=$func_arith_result
! 6285:
! 6286: case $version_type in
! 6287: nonstopux) verstring_prefix=nonstopux ;;
! 6288: *) verstring_prefix=sgi ;;
! 6289: esac
! 6290: verstring="$verstring_prefix$major.$revision"
! 6291:
! 6292: # Add in all the interfaces that we are compatible with.
! 6293: loop=$revision
! 6294: while test "$loop" -ne 0; do
! 6295: func_arith $revision - $loop
! 6296: iface=$func_arith_result
! 6297: func_arith $loop - 1
! 6298: loop=$func_arith_result
! 6299: verstring="$verstring_prefix$major.$iface:$verstring"
! 6300: done
! 6301:
! 6302: # Before this point, $major must not contain `.'.
! 6303: major=.$major
! 6304: versuffix="$major.$revision"
! 6305: ;;
! 6306:
! 6307: linux)
! 6308: func_arith $current - $age
! 6309: major=.$func_arith_result
! 6310: versuffix="$major.$age.$revision"
! 6311: ;;
! 6312:
! 6313: osf)
! 6314: func_arith $current - $age
! 6315: major=.$func_arith_result
! 6316: versuffix=".$current.$age.$revision"
! 6317: verstring="$current.$age.$revision"
! 6318:
! 6319: # Add in all the interfaces that we are compatible with.
! 6320: loop=$age
! 6321: while test "$loop" -ne 0; do
! 6322: func_arith $current - $loop
! 6323: iface=$func_arith_result
! 6324: func_arith $loop - 1
! 6325: loop=$func_arith_result
! 6326: verstring="$verstring:${iface}.0"
! 6327: done
! 6328:
! 6329: # Make executables depend on our current version.
! 6330: verstring="$verstring:${current}.0"
! 6331: ;;
! 6332:
! 6333: qnx)
! 6334: major=".$current"
! 6335: versuffix=".$current"
! 6336: ;;
! 6337:
! 6338: sunos)
! 6339: major=".$current"
! 6340: versuffix=".$current.$revision"
! 6341: ;;
! 6342:
! 6343: windows)
! 6344: # Use '-' rather than '.', since we only want one
! 6345: # extension on DOS 8.3 filesystems.
! 6346: func_arith $current - $age
! 6347: major=$func_arith_result
! 6348: versuffix="-$major"
! 6349: ;;
! 6350:
! 6351: *)
! 6352: func_fatal_configuration "unknown library version type \`$version_type'"
! 6353: ;;
! 6354: esac
! 6355:
! 6356: # Clear the version info if we defaulted, and they specified a release.
! 6357: if test -z "$vinfo" && test -n "$release"; then
! 6358: major=
! 6359: case $version_type in
! 6360: darwin)
! 6361: # we can't check for "0.0" in archive_cmds due to quoting
! 6362: # problems, so we reset it completely
! 6363: verstring=
! 6364: ;;
! 6365: *)
! 6366: verstring="0.0"
! 6367: ;;
! 6368: esac
! 6369: if test "$need_version" = no; then
! 6370: versuffix=
! 6371: else
! 6372: versuffix=".0.0"
! 6373: fi
! 6374: fi
! 6375:
! 6376: # Remove version info from name if versioning should be avoided
! 6377: if test "$avoid_version" = yes && test "$need_version" = no; then
! 6378: major=
! 6379: versuffix=
! 6380: verstring=""
! 6381: fi
! 6382:
! 6383: # Check to see if the archive will have undefined symbols.
! 6384: if test "$allow_undefined" = yes; then
! 6385: if test "$allow_undefined_flag" = unsupported; then
! 6386: func_warning "undefined symbols not allowed in $host shared libraries"
! 6387: build_libtool_libs=no
! 6388: build_old_libs=yes
! 6389: fi
! 6390: else
! 6391: # Don't allow undefined symbols.
! 6392: allow_undefined_flag="$no_undefined_flag"
! 6393: fi
! 6394:
! 6395: fi
! 6396:
! 6397: func_generate_dlsyms "$libname" "$libname" "yes"
! 6398: libobjs="$libobjs $symfileobj"
! 6399: test "X$libobjs" = "X " && libobjs=
! 6400:
! 6401: if test "$mode" != relink; then
! 6402: # Remove our outputs, but don't remove object files since they
! 6403: # may have been created when compiling PIC objects.
! 6404: removelist=
! 6405: tempremovelist=`$ECHO "$output_objdir/*"`
! 6406: for p in $tempremovelist; do
! 6407: case $p in
! 6408: *.$objext | *.gcno)
! 6409: ;;
! 6410: $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
! 6411: if test "X$precious_files_regex" != "X"; then
! 6412: if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
! 6413: then
! 6414: continue
! 6415: fi
! 6416: fi
! 6417: removelist="$removelist $p"
! 6418: ;;
! 6419: *) ;;
! 6420: esac
! 6421: done
! 6422: test -n "$removelist" && \
! 6423: func_show_eval "${RM}r \$removelist"
! 6424: fi
! 6425:
! 6426: # Now set the variables for building old libraries.
! 6427: if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
! 6428: oldlibs="$oldlibs $output_objdir/$libname.$libext"
! 6429:
! 6430: # Transform .lo files to .o files.
! 6431: oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
! 6432: fi
! 6433:
! 6434: # Eliminate all temporary directories.
! 6435: #for path in $notinst_path; do
! 6436: # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
! 6437: # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
! 6438: # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
! 6439: #done
! 6440:
! 6441: if test -n "$xrpath"; then
! 6442: # If the user specified any rpath flags, then add them.
! 6443: temp_xrpath=
! 6444: for libdir in $xrpath; do
! 6445: temp_xrpath="$temp_xrpath -R$libdir"
! 6446: case "$finalize_rpath " in
! 6447: *" $libdir "*) ;;
! 6448: *) finalize_rpath="$finalize_rpath $libdir" ;;
! 6449: esac
! 6450: done
! 6451: if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
! 6452: dependency_libs="$temp_xrpath $dependency_libs"
! 6453: fi
! 6454: fi
! 6455:
! 6456: # Make sure dlfiles contains only unique files that won't be dlpreopened
! 6457: old_dlfiles="$dlfiles"
! 6458: dlfiles=
! 6459: for lib in $old_dlfiles; do
! 6460: case " $dlprefiles $dlfiles " in
! 6461: *" $lib "*) ;;
! 6462: *) dlfiles="$dlfiles $lib" ;;
! 6463: esac
! 6464: done
! 6465:
! 6466: # Make sure dlprefiles contains only unique files
! 6467: old_dlprefiles="$dlprefiles"
! 6468: dlprefiles=
! 6469: for lib in $old_dlprefiles; do
! 6470: case "$dlprefiles " in
! 6471: *" $lib "*) ;;
! 6472: *) dlprefiles="$dlprefiles $lib" ;;
! 6473: esac
! 6474: done
! 6475:
! 6476: if test "$build_libtool_libs" = yes; then
! 6477: if test -n "$rpath"; then
! 6478: case $host in
! 6479: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
! 6480: # these systems don't actually have a c library (as such)!
! 6481: ;;
! 6482: *-*-rhapsody* | *-*-darwin1.[012])
! 6483: # Rhapsody C library is in the System framework
! 6484: deplibs="$deplibs System.ltframework"
! 6485: ;;
! 6486: *-*-netbsd*)
! 6487: # Don't link with libc until the a.out ld.so is fixed.
! 6488: ;;
! 6489: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 6490: # Do not include libc due to us having libc/libc_r.
! 6491: ;;
! 6492: *-*-sco3.2v5* | *-*-sco5v6*)
! 6493: # Causes problems with __ctype
! 6494: ;;
! 6495: *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
! 6496: # Compiler inserts libc in the correct place for threads to work
! 6497: ;;
! 6498: *)
! 6499: # Add libc to deplibs on all other systems if necessary.
! 6500: if test "$build_libtool_need_lc" = "yes"; then
! 6501: deplibs="$deplibs -lc"
! 6502: fi
! 6503: ;;
! 6504: esac
! 6505: fi
! 6506:
! 6507: # Transform deplibs into only deplibs that can be linked in shared.
! 6508: name_save=$name
! 6509: libname_save=$libname
! 6510: release_save=$release
! 6511: versuffix_save=$versuffix
! 6512: major_save=$major
! 6513: # I'm not sure if I'm treating the release correctly. I think
! 6514: # release should show up in the -l (ie -lgmp5) so we don't want to
! 6515: # add it in twice. Is that correct?
! 6516: release=""
! 6517: versuffix=""
! 6518: major=""
! 6519: newdeplibs=
! 6520: droppeddeps=no
! 6521: case $deplibs_check_method in
! 6522: pass_all)
! 6523: # Don't check for shared/static. Everything works.
! 6524: # This might be a little naive. We might want to check
! 6525: # whether the library exists or not. But this is on
! 6526: # osf3 & osf4 and I'm not really sure... Just
! 6527: # implementing what was already the behavior.
! 6528: newdeplibs=$deplibs
! 6529: ;;
! 6530: test_compile)
! 6531: # This code stresses the "libraries are programs" paradigm to its
! 6532: # limits. Maybe even breaks it. We compile a program, linking it
! 6533: # against the deplibs as a proxy for the library. Then we can check
! 6534: # whether they linked in statically or dynamically with ldd.
! 6535: $opt_dry_run || $RM conftest.c
! 6536: cat > conftest.c <<EOF
! 6537: int main() { return 0; }
! 6538: EOF
! 6539: $opt_dry_run || $RM conftest
! 6540: if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
! 6541: ldd_output=`ldd conftest`
! 6542: for i in $deplibs; do
! 6543: case $i in
! 6544: -l*)
! 6545: func_stripname -l '' "$i"
! 6546: name=$func_stripname_result
! 6547: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6548: case " $predeps $postdeps " in
! 6549: *" $i "*)
! 6550: newdeplibs="$newdeplibs $i"
! 6551: i=""
! 6552: ;;
! 6553: esac
! 6554: fi
! 6555: if test -n "$i" ; then
! 6556: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6557: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
! 6558: set dummy $deplib_matches; shift
! 6559: deplib_match=$1
! 6560: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
! 6561: newdeplibs="$newdeplibs $i"
! 6562: else
! 6563: droppeddeps=yes
! 6564: $ECHO
! 6565: $ECHO "*** Warning: dynamic linker does not accept needed library $i."
! 6566: $ECHO "*** I have the capability to make that library automatically link in when"
! 6567: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6568: $ECHO "*** shared version of the library, which I believe you do not have"
! 6569: $ECHO "*** because a test_compile did reveal that the linker did not use it for"
! 6570: $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
! 6571: fi
! 6572: fi
! 6573: ;;
! 6574: *)
! 6575: newdeplibs="$newdeplibs $i"
! 6576: ;;
! 6577: esac
! 6578: done
! 6579: else
! 6580: # Error occurred in the first compile. Let's try to salvage
! 6581: # the situation: Compile a separate program for each library.
! 6582: for i in $deplibs; do
! 6583: case $i in
! 6584: -l*)
! 6585: func_stripname -l '' "$i"
! 6586: name=$func_stripname_result
! 6587: $opt_dry_run || $RM conftest
! 6588: if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
! 6589: ldd_output=`ldd conftest`
! 6590: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6591: case " $predeps $postdeps " in
! 6592: *" $i "*)
! 6593: newdeplibs="$newdeplibs $i"
! 6594: i=""
! 6595: ;;
! 6596: esac
! 6597: fi
! 6598: if test -n "$i" ; then
! 6599: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6600: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
! 6601: set dummy $deplib_matches; shift
! 6602: deplib_match=$1
! 6603: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
! 6604: newdeplibs="$newdeplibs $i"
! 6605: else
! 6606: droppeddeps=yes
! 6607: $ECHO
! 6608: $ECHO "*** Warning: dynamic linker does not accept needed library $i."
! 6609: $ECHO "*** I have the capability to make that library automatically link in when"
! 6610: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6611: $ECHO "*** shared version of the library, which you do not appear to have"
! 6612: $ECHO "*** because a test_compile did reveal that the linker did not use this one"
! 6613: $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
! 6614: fi
! 6615: fi
! 6616: else
! 6617: droppeddeps=yes
! 6618: $ECHO
! 6619: $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
! 6620: $ECHO "*** make it link in! You will probably need to install it or some"
! 6621: $ECHO "*** library that it depends on before this library will be fully"
! 6622: $ECHO "*** functional. Installing it before continuing would be even better."
! 6623: fi
! 6624: ;;
! 6625: *)
! 6626: newdeplibs="$newdeplibs $i"
! 6627: ;;
! 6628: esac
! 6629: done
! 6630: fi
! 6631: ;;
! 6632: file_magic*)
! 6633: set dummy $deplibs_check_method; shift
! 6634: file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 6635: for a_deplib in $deplibs; do
! 6636: case $a_deplib in
! 6637: -l*)
! 6638: func_stripname -l '' "$a_deplib"
! 6639: name=$func_stripname_result
! 6640: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6641: case " $predeps $postdeps " in
! 6642: *" $a_deplib "*)
! 6643: newdeplibs="$newdeplibs $a_deplib"
! 6644: a_deplib=""
! 6645: ;;
! 6646: esac
! 6647: fi
! 6648: if test -n "$a_deplib" ; then
! 6649: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6650: for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
! 6651: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
! 6652: for potent_lib in $potential_libs; do
! 6653: # Follow soft links.
! 6654: if ls -lLd "$potent_lib" 2>/dev/null |
! 6655: $GREP " -> " >/dev/null; then
! 6656: continue
! 6657: fi
! 6658: # The statement above tries to avoid entering an
! 6659: # endless loop below, in case of cyclic links.
! 6660: # We might still enter an endless loop, since a link
! 6661: # loop can be closed while we follow links,
! 6662: # but so what?
! 6663: potlib="$potent_lib"
! 6664: while test -h "$potlib" 2>/dev/null; do
! 6665: potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
! 6666: case $potliblink in
! 6667: [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
! 6668: *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
! 6669: esac
! 6670: done
! 6671: if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
! 6672: $SED -e 10q |
! 6673: $EGREP "$file_magic_regex" > /dev/null; then
! 6674: newdeplibs="$newdeplibs $a_deplib"
! 6675: a_deplib=""
! 6676: break 2
! 6677: fi
! 6678: done
! 6679: done
! 6680: fi
! 6681: if test -n "$a_deplib" ; then
! 6682: droppeddeps=yes
! 6683: $ECHO
! 6684: $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
! 6685: $ECHO "*** I have the capability to make that library automatically link in when"
! 6686: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6687: $ECHO "*** shared version of the library, which you do not appear to have"
! 6688: $ECHO "*** because I did check the linker path looking for a file starting"
! 6689: if test -z "$potlib" ; then
! 6690: $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
! 6691: else
! 6692: $ECHO "*** with $libname and none of the candidates passed a file format test"
! 6693: $ECHO "*** using a file magic. Last file checked: $potlib"
! 6694: fi
! 6695: fi
! 6696: ;;
! 6697: *)
! 6698: # Add a -L argument.
! 6699: newdeplibs="$newdeplibs $a_deplib"
! 6700: ;;
! 6701: esac
! 6702: done # Gone through all deplibs.
! 6703: ;;
! 6704: match_pattern*)
! 6705: set dummy $deplibs_check_method; shift
! 6706: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 6707: for a_deplib in $deplibs; do
! 6708: case $a_deplib in
! 6709: -l*)
! 6710: func_stripname -l '' "$a_deplib"
! 6711: name=$func_stripname_result
! 6712: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6713: case " $predeps $postdeps " in
! 6714: *" $a_deplib "*)
! 6715: newdeplibs="$newdeplibs $a_deplib"
! 6716: a_deplib=""
! 6717: ;;
! 6718: esac
! 6719: fi
! 6720: if test -n "$a_deplib" ; then
! 6721: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6722: for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
! 6723: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
! 6724: for potent_lib in $potential_libs; do
! 6725: potlib="$potent_lib" # see symlink-check above in file_magic test
! 6726: if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
! 6727: $EGREP "$match_pattern_regex" > /dev/null; then
! 6728: newdeplibs="$newdeplibs $a_deplib"
! 6729: a_deplib=""
! 6730: break 2
! 6731: fi
! 6732: done
! 6733: done
! 6734: fi
! 6735: if test -n "$a_deplib" ; then
! 6736: droppeddeps=yes
! 6737: $ECHO
! 6738: $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
! 6739: $ECHO "*** I have the capability to make that library automatically link in when"
! 6740: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6741: $ECHO "*** shared version of the library, which you do not appear to have"
! 6742: $ECHO "*** because I did check the linker path looking for a file starting"
! 6743: if test -z "$potlib" ; then
! 6744: $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
! 6745: else
! 6746: $ECHO "*** with $libname and none of the candidates passed a file format test"
! 6747: $ECHO "*** using a regex pattern. Last file checked: $potlib"
! 6748: fi
! 6749: fi
! 6750: ;;
! 6751: *)
! 6752: # Add a -L argument.
! 6753: newdeplibs="$newdeplibs $a_deplib"
! 6754: ;;
! 6755: esac
! 6756: done # Gone through all deplibs.
! 6757: ;;
! 6758: none | unknown | *)
! 6759: newdeplibs=""
! 6760: tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
! 6761: -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
! 6762: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6763: for i in $predeps $postdeps ; do
! 6764: # can't use Xsed below, because $i might contain '/'
! 6765: tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
! 6766: done
! 6767: fi
! 6768: if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
! 6769: $GREP . >/dev/null; then
! 6770: $ECHO
! 6771: if test "X$deplibs_check_method" = "Xnone"; then
! 6772: $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
! 6773: else
! 6774: $ECHO "*** Warning: inter-library dependencies are not known to be supported."
! 6775: fi
! 6776: $ECHO "*** All declared inter-library dependencies are being dropped."
! 6777: droppeddeps=yes
! 6778: fi
! 6779: ;;
! 6780: esac
! 6781: versuffix=$versuffix_save
! 6782: major=$major_save
! 6783: release=$release_save
! 6784: libname=$libname_save
! 6785: name=$name_save
! 6786:
! 6787: case $host in
! 6788: *-*-rhapsody* | *-*-darwin1.[012])
! 6789: # On Rhapsody replace the C library with the System framework
! 6790: newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
! 6791: ;;
! 6792: esac
! 6793:
! 6794: if test "$droppeddeps" = yes; then
! 6795: if test "$module" = yes; then
! 6796: $ECHO
! 6797: $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
! 6798: $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
! 6799: $ECHO "*** a static module, that should work as long as the dlopening"
! 6800: $ECHO "*** application is linked with the -dlopen flag."
! 6801: if test -z "$global_symbol_pipe"; then
! 6802: $ECHO
! 6803: $ECHO "*** However, this would only work if libtool was able to extract symbol"
! 6804: $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
! 6805: $ECHO "*** not find such a program. So, this module is probably useless."
! 6806: $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
! 6807: fi
! 6808: if test "$build_old_libs" = no; then
! 6809: oldlibs="$output_objdir/$libname.$libext"
! 6810: build_libtool_libs=module
! 6811: build_old_libs=yes
! 6812: else
! 6813: build_libtool_libs=no
! 6814: fi
! 6815: else
! 6816: $ECHO "*** The inter-library dependencies that have been dropped here will be"
! 6817: $ECHO "*** automatically added whenever a program is linked with this library"
! 6818: $ECHO "*** or is declared to -dlopen it."
! 6819:
! 6820: if test "$allow_undefined" = no; then
! 6821: $ECHO
! 6822: $ECHO "*** Since this library must not contain undefined symbols,"
! 6823: $ECHO "*** because either the platform does not support them or"
! 6824: $ECHO "*** it was explicitly requested with -no-undefined,"
! 6825: $ECHO "*** libtool will only create a static version of it."
! 6826: if test "$build_old_libs" = no; then
! 6827: oldlibs="$output_objdir/$libname.$libext"
! 6828: build_libtool_libs=module
! 6829: build_old_libs=yes
! 6830: else
! 6831: build_libtool_libs=no
! 6832: fi
! 6833: fi
! 6834: fi
! 6835: fi
! 6836: # Done checking deplibs!
! 6837: deplibs=$newdeplibs
! 6838: fi
! 6839: # Time to change all our "foo.ltframework" stuff back to "-framework foo"
! 6840: case $host in
! 6841: *-*-darwin*)
! 6842: newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6843: new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6844: deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6845: ;;
! 6846: esac
! 6847:
! 6848: # move library search paths that coincide with paths to not yet
! 6849: # installed libraries to the beginning of the library search list
! 6850: new_libs=
! 6851: for path in $notinst_path; do
! 6852: case " $new_libs " in
! 6853: *" -L$path/$objdir "*) ;;
! 6854: *)
! 6855: case " $deplibs " in
! 6856: *" -L$path/$objdir "*)
! 6857: new_libs="$new_libs -L$path/$objdir" ;;
! 6858: esac
! 6859: ;;
! 6860: esac
! 6861: done
! 6862: for deplib in $deplibs; do
! 6863: case $deplib in
! 6864: -L*)
! 6865: case " $new_libs " in
! 6866: *" $deplib "*) ;;
! 6867: *) new_libs="$new_libs $deplib" ;;
! 6868: esac
! 6869: ;;
! 6870: *) new_libs="$new_libs $deplib" ;;
! 6871: esac
! 6872: done
! 6873: deplibs="$new_libs"
! 6874:
! 6875: # All the library-specific variables (install_libdir is set above).
! 6876: library_names=
! 6877: old_library=
! 6878: dlname=
! 6879:
! 6880: # Test again, we may have decided not to build it any more
! 6881: if test "$build_libtool_libs" = yes; then
! 6882: if test "$hardcode_into_libs" = yes; then
! 6883: # Hardcode the library paths
! 6884: hardcode_libdirs=
! 6885: dep_rpath=
! 6886: rpath="$finalize_rpath"
! 6887: test "$mode" != relink && rpath="$compile_rpath$rpath"
! 6888: for libdir in $rpath; do
! 6889: if test -n "$hardcode_libdir_flag_spec"; then
! 6890: if test -n "$hardcode_libdir_separator"; then
! 6891: if test -z "$hardcode_libdirs"; then
! 6892: hardcode_libdirs="$libdir"
! 6893: else
! 6894: # Just accumulate the unique libdirs.
! 6895: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 6896: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 6897: ;;
! 6898: *)
! 6899: hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
! 6900: ;;
! 6901: esac
! 6902: fi
! 6903: else
! 6904: eval flag=\"$hardcode_libdir_flag_spec\"
! 6905: dep_rpath="$dep_rpath $flag"
! 6906: fi
! 6907: elif test -n "$runpath_var"; then
! 6908: case "$perm_rpath " in
! 6909: *" $libdir "*) ;;
! 6910: *) perm_rpath="$perm_rpath $libdir" ;;
! 6911: esac
! 6912: fi
! 6913: done
! 6914: # Substitute the hardcoded libdirs into the rpath.
! 6915: if test -n "$hardcode_libdir_separator" &&
! 6916: test -n "$hardcode_libdirs"; then
! 6917: libdir="$hardcode_libdirs"
! 6918: if test -n "$hardcode_libdir_flag_spec_ld"; then
! 6919: eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
! 6920: else
! 6921: eval dep_rpath=\"$hardcode_libdir_flag_spec\"
! 6922: fi
! 6923: fi
! 6924: if test -n "$runpath_var" && test -n "$perm_rpath"; then
! 6925: # We should set the runpath_var.
! 6926: rpath=
! 6927: for dir in $perm_rpath; do
! 6928: rpath="$rpath$dir:"
! 6929: done
! 6930: eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
! 6931: fi
! 6932: test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
! 6933: fi
! 6934:
! 6935: shlibpath="$finalize_shlibpath"
! 6936: test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
! 6937: if test -n "$shlibpath"; then
! 6938: eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
! 6939: fi
! 6940:
! 6941: # Get the real and link names of the library.
! 6942: eval shared_ext=\"$shrext_cmds\"
! 6943: eval library_names=\"$library_names_spec\"
! 6944: set dummy $library_names
! 6945: shift
! 6946: realname="$1"
! 6947: shift
! 6948:
! 6949: if test -n "$soname_spec"; then
! 6950: eval soname=\"$soname_spec\"
! 6951: else
! 6952: soname="$realname"
! 6953: fi
! 6954: if test -z "$dlname"; then
! 6955: dlname=$soname
! 6956: fi
! 6957:
! 6958: lib="$output_objdir/$realname"
! 6959: linknames=
! 6960: for link
! 6961: do
! 6962: linknames="$linknames $link"
! 6963: done
! 6964:
! 6965: # Use standard objects if they are pic
! 6966: test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 6967: test "X$libobjs" = "X " && libobjs=
! 6968:
! 6969: delfiles=
! 6970: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 6971: $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
! 6972: export_symbols="$output_objdir/$libname.uexp"
! 6973: delfiles="$delfiles $export_symbols"
! 6974: fi
! 6975:
! 6976: orig_export_symbols=
! 6977: case $host_os in
! 6978: cygwin* | mingw* | cegcc*)
! 6979: if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
! 6980: # exporting using user supplied symfile
! 6981: if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
! 6982: # and it's NOT already a .def file. Must figure out
! 6983: # which of the given symbols are data symbols and tag
! 6984: # them as such. So, trigger use of export_symbols_cmds.
! 6985: # export_symbols gets reassigned inside the "prepare
! 6986: # the list of exported symbols" if statement, so the
! 6987: # include_expsyms logic still works.
! 6988: orig_export_symbols="$export_symbols"
! 6989: export_symbols=
! 6990: always_export_symbols=yes
! 6991: fi
! 6992: fi
! 6993: ;;
! 6994: esac
! 6995:
! 6996: # Prepare the list of exported symbols
! 6997: if test -z "$export_symbols"; then
! 6998: if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
! 6999: func_verbose "generating symbol list for \`$libname.la'"
! 7000: export_symbols="$output_objdir/$libname.exp"
! 7001: $opt_dry_run || $RM $export_symbols
! 7002: cmds=$export_symbols_cmds
! 7003: save_ifs="$IFS"; IFS='~'
! 7004: for cmd in $cmds; do
! 7005: IFS="$save_ifs"
! 7006: eval cmd=\"$cmd\"
! 7007: func_len " $cmd"
! 7008: len=$func_len_result
! 7009: if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 7010: func_show_eval "$cmd" 'exit $?'
! 7011: skipped_export=false
! 7012: else
! 7013: # The command line is too long to execute in one step.
! 7014: func_verbose "using reloadable object file for export list..."
! 7015: skipped_export=:
! 7016: # Break out early, otherwise skipped_export may be
! 7017: # set to false by a later but shorter cmd.
! 7018: break
! 7019: fi
! 7020: done
! 7021: IFS="$save_ifs"
! 7022: if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
! 7023: func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
! 7024: func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
! 7025: fi
! 7026: fi
! 7027: fi
! 7028:
! 7029: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 7030: tmp_export_symbols="$export_symbols"
! 7031: test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
! 7032: $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
! 7033: fi
! 7034:
! 7035: if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
! 7036: # The given exports_symbols file has to be filtered, so filter it.
! 7037: func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
! 7038: # FIXME: $output_objdir/$libname.filter potentially contains lots of
! 7039: # 's' commands which not all seds can handle. GNU sed should be fine
! 7040: # though. Also, the filter scales superlinearly with the number of
! 7041: # global variables. join(1) would be nice here, but unfortunately
! 7042: # isn't a blessed tool.
! 7043: $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
! 7044: delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
! 7045: export_symbols=$output_objdir/$libname.def
! 7046: $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
! 7047: fi
! 7048:
! 7049: tmp_deplibs=
! 7050: for test_deplib in $deplibs; do
! 7051: case " $convenience " in
! 7052: *" $test_deplib "*) ;;
! 7053: *)
! 7054: tmp_deplibs="$tmp_deplibs $test_deplib"
! 7055: ;;
! 7056: esac
! 7057: done
! 7058: deplibs="$tmp_deplibs"
! 7059:
! 7060: if test -n "$convenience"; then
! 7061: if test -n "$whole_archive_flag_spec" &&
! 7062: test "$compiler_needs_object" = yes &&
! 7063: test -z "$libobjs"; then
! 7064: # extract the archives, so we have objects to list.
! 7065: # TODO: could optimize this to just extract one archive.
! 7066: whole_archive_flag_spec=
! 7067: fi
! 7068: if test -n "$whole_archive_flag_spec"; then
! 7069: save_libobjs=$libobjs
! 7070: eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
! 7071: test "X$libobjs" = "X " && libobjs=
! 7072: else
! 7073: gentop="$output_objdir/${outputname}x"
! 7074: generated="$generated $gentop"
! 7075:
! 7076: func_extract_archives $gentop $convenience
! 7077: libobjs="$libobjs $func_extract_archives_result"
! 7078: test "X$libobjs" = "X " && libobjs=
! 7079: fi
! 7080: fi
! 7081:
! 7082: if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
! 7083: eval flag=\"$thread_safe_flag_spec\"
! 7084: linker_flags="$linker_flags $flag"
! 7085: fi
! 7086:
! 7087: # Make a backup of the uninstalled library when relinking
! 7088: if test "$mode" = relink; then
! 7089: $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
! 7090: fi
! 7091:
! 7092: # Do each of the archive commands.
! 7093: if test "$module" = yes && test -n "$module_cmds" ; then
! 7094: if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
! 7095: eval test_cmds=\"$module_expsym_cmds\"
! 7096: cmds=$module_expsym_cmds
! 7097: else
! 7098: eval test_cmds=\"$module_cmds\"
! 7099: cmds=$module_cmds
! 7100: fi
! 7101: else
! 7102: if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
! 7103: eval test_cmds=\"$archive_expsym_cmds\"
! 7104: cmds=$archive_expsym_cmds
! 7105: else
! 7106: eval test_cmds=\"$archive_cmds\"
! 7107: cmds=$archive_cmds
! 7108: fi
! 7109: fi
! 7110:
! 7111: if test "X$skipped_export" != "X:" &&
! 7112: func_len " $test_cmds" &&
! 7113: len=$func_len_result &&
! 7114: test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 7115: :
! 7116: else
! 7117: # The command line is too long to link in one step, link piecewise
! 7118: # or, if using GNU ld and skipped_export is not :, use a linker
! 7119: # script.
! 7120:
! 7121: # Save the value of $output and $libobjs because we want to
! 7122: # use them later. If we have whole_archive_flag_spec, we
! 7123: # want to use save_libobjs as it was before
! 7124: # whole_archive_flag_spec was expanded, because we can't
! 7125: # assume the linker understands whole_archive_flag_spec.
! 7126: # This may have to be revisited, in case too many
! 7127: # convenience libraries get linked in and end up exceeding
! 7128: # the spec.
! 7129: if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
! 7130: save_libobjs=$libobjs
! 7131: fi
! 7132: save_output=$output
! 7133: output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
! 7134:
! 7135: # Clear the reloadable object creation command queue and
! 7136: # initialize k to one.
! 7137: test_cmds=
! 7138: concat_cmds=
! 7139: objlist=
! 7140: last_robj=
! 7141: k=1
! 7142:
! 7143: if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
! 7144: output=${output_objdir}/${output_la}.lnkscript
! 7145: func_verbose "creating GNU ld script: $output"
! 7146: $ECHO 'INPUT (' > $output
! 7147: for obj in $save_libobjs
! 7148: do
! 7149: $ECHO "$obj" >> $output
! 7150: done
! 7151: $ECHO ')' >> $output
! 7152: delfiles="$delfiles $output"
! 7153: elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
! 7154: output=${output_objdir}/${output_la}.lnk
! 7155: func_verbose "creating linker input file list: $output"
! 7156: : > $output
! 7157: set x $save_libobjs
! 7158: shift
! 7159: firstobj=
! 7160: if test "$compiler_needs_object" = yes; then
! 7161: firstobj="$1 "
! 7162: shift
! 7163: fi
! 7164: for obj
! 7165: do
! 7166: $ECHO "$obj" >> $output
! 7167: done
! 7168: delfiles="$delfiles $output"
! 7169: output=$firstobj\"$file_list_spec$output\"
! 7170: else
! 7171: if test -n "$save_libobjs"; then
! 7172: func_verbose "creating reloadable object files..."
! 7173: output=$output_objdir/$output_la-${k}.$objext
! 7174: eval test_cmds=\"$reload_cmds\"
! 7175: func_len " $test_cmds"
! 7176: len0=$func_len_result
! 7177: len=$len0
! 7178:
! 7179: # Loop over the list of objects to be linked.
! 7180: for obj in $save_libobjs
! 7181: do
! 7182: func_len " $obj"
! 7183: func_arith $len + $func_len_result
! 7184: len=$func_arith_result
! 7185: if test "X$objlist" = X ||
! 7186: test "$len" -lt "$max_cmd_len"; then
! 7187: func_append objlist " $obj"
! 7188: else
! 7189: # The command $test_cmds is almost too long, add a
! 7190: # command to the queue.
! 7191: if test "$k" -eq 1 ; then
! 7192: # The first file doesn't have a previous command to add.
! 7193: eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
! 7194: else
! 7195: # All subsequent reloadable object files will link in
! 7196: # the last one created.
! 7197: eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
! 7198: fi
! 7199: last_robj=$output_objdir/$output_la-${k}.$objext
! 7200: func_arith $k + 1
! 7201: k=$func_arith_result
! 7202: output=$output_objdir/$output_la-${k}.$objext
! 7203: objlist=$obj
! 7204: func_len " $last_robj"
! 7205: func_arith $len0 + $func_len_result
! 7206: len=$func_arith_result
! 7207: fi
! 7208: done
! 7209: # Handle the remaining objects by creating one last
! 7210: # reloadable object file. All subsequent reloadable object
! 7211: # files will link in the last one created.
! 7212: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 7213: eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
! 7214: if test -n "$last_robj"; then
! 7215: eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
! 7216: fi
! 7217: delfiles="$delfiles $output"
! 7218:
! 7219: else
! 7220: output=
! 7221: fi
! 7222:
! 7223: if ${skipped_export-false}; then
! 7224: func_verbose "generating symbol list for \`$libname.la'"
! 7225: export_symbols="$output_objdir/$libname.exp"
! 7226: $opt_dry_run || $RM $export_symbols
! 7227: libobjs=$output
! 7228: # Append the command to create the export file.
! 7229: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 7230: eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
! 7231: if test -n "$last_robj"; then
! 7232: eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
! 7233: fi
! 7234: fi
! 7235:
! 7236: test -n "$save_libobjs" &&
! 7237: func_verbose "creating a temporary reloadable object file: $output"
! 7238:
! 7239: # Loop through the commands generated above and execute them.
! 7240: save_ifs="$IFS"; IFS='~'
! 7241: for cmd in $concat_cmds; do
! 7242: IFS="$save_ifs"
! 7243: $opt_silent || {
! 7244: func_quote_for_expand "$cmd"
! 7245: eval "func_echo $func_quote_for_expand_result"
! 7246: }
! 7247: $opt_dry_run || eval "$cmd" || {
! 7248: lt_exit=$?
! 7249:
! 7250: # Restore the uninstalled library and exit
! 7251: if test "$mode" = relink; then
! 7252: ( cd "$output_objdir" && \
! 7253: $RM "${realname}T" && \
! 7254: $MV "${realname}U" "$realname" )
! 7255: fi
! 7256:
! 7257: exit $lt_exit
! 7258: }
! 7259: done
! 7260: IFS="$save_ifs"
! 7261:
! 7262: if test -n "$export_symbols_regex" && ${skipped_export-false}; then
! 7263: func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
! 7264: func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
! 7265: fi
! 7266: fi
! 7267:
! 7268: if ${skipped_export-false}; then
! 7269: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 7270: tmp_export_symbols="$export_symbols"
! 7271: test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
! 7272: $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
! 7273: fi
! 7274:
! 7275: if test -n "$orig_export_symbols"; then
! 7276: # The given exports_symbols file has to be filtered, so filter it.
! 7277: func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
! 7278: # FIXME: $output_objdir/$libname.filter potentially contains lots of
! 7279: # 's' commands which not all seds can handle. GNU sed should be fine
! 7280: # though. Also, the filter scales superlinearly with the number of
! 7281: # global variables. join(1) would be nice here, but unfortunately
! 7282: # isn't a blessed tool.
! 7283: $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
! 7284: delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
! 7285: export_symbols=$output_objdir/$libname.def
! 7286: $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
! 7287: fi
! 7288: fi
! 7289:
! 7290: libobjs=$output
! 7291: # Restore the value of output.
! 7292: output=$save_output
! 7293:
! 7294: if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
! 7295: eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
! 7296: test "X$libobjs" = "X " && libobjs=
! 7297: fi
! 7298: # Expand the library linking commands again to reset the
! 7299: # value of $libobjs for piecewise linking.
! 7300:
! 7301: # Do each of the archive commands.
! 7302: if test "$module" = yes && test -n "$module_cmds" ; then
! 7303: if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
! 7304: cmds=$module_expsym_cmds
! 7305: else
! 7306: cmds=$module_cmds
! 7307: fi
! 7308: else
! 7309: if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
! 7310: cmds=$archive_expsym_cmds
! 7311: else
! 7312: cmds=$archive_cmds
! 7313: fi
! 7314: fi
! 7315: fi
! 7316:
! 7317: if test -n "$delfiles"; then
! 7318: # Append the command to remove temporary files to $cmds.
! 7319: eval cmds=\"\$cmds~\$RM $delfiles\"
! 7320: fi
! 7321:
! 7322: # Add any objects from preloaded convenience libraries
! 7323: if test -n "$dlprefiles"; then
! 7324: gentop="$output_objdir/${outputname}x"
! 7325: generated="$generated $gentop"
! 7326:
! 7327: func_extract_archives $gentop $dlprefiles
! 7328: libobjs="$libobjs $func_extract_archives_result"
! 7329: test "X$libobjs" = "X " && libobjs=
! 7330: fi
! 7331:
! 7332: save_ifs="$IFS"; IFS='~'
! 7333: for cmd in $cmds; do
! 7334: IFS="$save_ifs"
! 7335: eval cmd=\"$cmd\"
! 7336: $opt_silent || {
! 7337: func_quote_for_expand "$cmd"
! 7338: eval "func_echo $func_quote_for_expand_result"
! 7339: }
! 7340: $opt_dry_run || eval "$cmd" || {
! 7341: lt_exit=$?
! 7342:
! 7343: # Restore the uninstalled library and exit
! 7344: if test "$mode" = relink; then
! 7345: ( cd "$output_objdir" && \
! 7346: $RM "${realname}T" && \
! 7347: $MV "${realname}U" "$realname" )
! 7348: fi
! 7349:
! 7350: exit $lt_exit
! 7351: }
! 7352: done
! 7353: IFS="$save_ifs"
! 7354:
! 7355: # Restore the uninstalled library and exit
! 7356: if test "$mode" = relink; then
! 7357: $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
! 7358:
! 7359: if test -n "$convenience"; then
! 7360: if test -z "$whole_archive_flag_spec"; then
! 7361: func_show_eval '${RM}r "$gentop"'
! 7362: fi
! 7363: fi
! 7364:
! 7365: exit $EXIT_SUCCESS
! 7366: fi
! 7367:
! 7368: # Create links to the real library.
! 7369: for linkname in $linknames; do
! 7370: if test "$realname" != "$linkname"; then
! 7371: func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
! 7372: fi
! 7373: done
! 7374:
! 7375: # If -module or -export-dynamic was specified, set the dlname.
! 7376: if test "$module" = yes || test "$export_dynamic" = yes; then
! 7377: # On all known operating systems, these are identical.
! 7378: dlname="$soname"
! 7379: fi
! 7380: fi
! 7381: ;;
! 7382:
! 7383: obj)
! 7384: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 7385: func_warning "\`-dlopen' is ignored for objects"
! 7386: fi
! 7387:
! 7388: case " $deplibs" in
! 7389: *\ -l* | *\ -L*)
! 7390: func_warning "\`-l' and \`-L' are ignored for objects" ;;
! 7391: esac
! 7392:
! 7393: test -n "$rpath" && \
! 7394: func_warning "\`-rpath' is ignored for objects"
! 7395:
! 7396: test -n "$xrpath" && \
! 7397: func_warning "\`-R' is ignored for objects"
! 7398:
! 7399: test -n "$vinfo" && \
! 7400: func_warning "\`-version-info' is ignored for objects"
! 7401:
! 7402: test -n "$release" && \
! 7403: func_warning "\`-release' is ignored for objects"
! 7404:
! 7405: case $output in
! 7406: *.lo)
! 7407: test -n "$objs$old_deplibs" && \
! 7408: func_fatal_error "cannot build library object \`$output' from non-libtool objects"
! 7409:
! 7410: libobj=$output
! 7411: func_lo2o "$libobj"
! 7412: obj=$func_lo2o_result
! 7413: ;;
! 7414: *)
! 7415: libobj=
! 7416: obj="$output"
! 7417: ;;
! 7418: esac
! 7419:
! 7420: # Delete the old objects.
! 7421: $opt_dry_run || $RM $obj $libobj
! 7422:
! 7423: # Objects from convenience libraries. This assumes
! 7424: # single-version convenience libraries. Whenever we create
! 7425: # different ones for PIC/non-PIC, this we'll have to duplicate
! 7426: # the extraction.
! 7427: reload_conv_objs=
! 7428: gentop=
! 7429: # reload_cmds runs $LD directly, so let us get rid of
! 7430: # -Wl from whole_archive_flag_spec and hope we can get by with
! 7431: # turning comma into space..
! 7432: wl=
! 7433:
! 7434: if test -n "$convenience"; then
! 7435: if test -n "$whole_archive_flag_spec"; then
! 7436: eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
! 7437: reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
! 7438: else
! 7439: gentop="$output_objdir/${obj}x"
! 7440: generated="$generated $gentop"
! 7441:
! 7442: func_extract_archives $gentop $convenience
! 7443: reload_conv_objs="$reload_objs $func_extract_archives_result"
! 7444: fi
! 7445: fi
! 7446:
! 7447: # Create the old-style object.
! 7448: reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
! 7449:
! 7450: output="$obj"
! 7451: func_execute_cmds "$reload_cmds" 'exit $?'
! 7452:
! 7453: # Exit if we aren't doing a library object file.
! 7454: if test -z "$libobj"; then
! 7455: if test -n "$gentop"; then
! 7456: func_show_eval '${RM}r "$gentop"'
! 7457: fi
! 7458:
! 7459: exit $EXIT_SUCCESS
! 7460: fi
! 7461:
! 7462: if test "$build_libtool_libs" != yes; then
! 7463: if test -n "$gentop"; then
! 7464: func_show_eval '${RM}r "$gentop"'
! 7465: fi
! 7466:
! 7467: # Create an invalid libtool object if no PIC, so that we don't
! 7468: # accidentally link it into a program.
! 7469: # $show "echo timestamp > $libobj"
! 7470: # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
! 7471: exit $EXIT_SUCCESS
! 7472: fi
! 7473:
! 7474: if test -n "$pic_flag" || test "$pic_mode" != default; then
! 7475: # Only do commands if we really have different PIC objects.
! 7476: reload_objs="$libobjs $reload_conv_objs"
! 7477: output="$libobj"
! 7478: func_execute_cmds "$reload_cmds" 'exit $?'
! 7479: fi
! 7480:
! 7481: if test -n "$gentop"; then
! 7482: func_show_eval '${RM}r "$gentop"'
! 7483: fi
! 7484:
! 7485: exit $EXIT_SUCCESS
! 7486: ;;
! 7487:
! 7488: prog)
! 7489: case $host in
! 7490: *cygwin*) func_stripname '' '.exe' "$output"
! 7491: output=$func_stripname_result.exe;;
! 7492: esac
! 7493: test -n "$vinfo" && \
! 7494: func_warning "\`-version-info' is ignored for programs"
! 7495:
! 7496: test -n "$release" && \
! 7497: func_warning "\`-release' is ignored for programs"
! 7498:
! 7499: test "$preload" = yes \
! 7500: && test "$dlopen_support" = unknown \
! 7501: && test "$dlopen_self" = unknown \
! 7502: && test "$dlopen_self_static" = unknown && \
! 7503: func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
! 7504:
! 7505: case $host in
! 7506: *-*-rhapsody* | *-*-darwin1.[012])
! 7507: # On Rhapsody replace the C library is the System framework
! 7508: compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
! 7509: finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
! 7510: ;;
! 7511: esac
! 7512:
! 7513: case $host in
! 7514: *-*-darwin*)
! 7515: # Don't allow lazy linking, it breaks C++ global constructors
! 7516: # But is supposedly fixed on 10.4 or later (yay!).
! 7517: if test "$tagname" = CXX ; then
! 7518: case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
! 7519: 10.[0123])
! 7520: compile_command="$compile_command ${wl}-bind_at_load"
! 7521: finalize_command="$finalize_command ${wl}-bind_at_load"
! 7522: ;;
! 7523: esac
! 7524: fi
! 7525: # Time to change all our "foo.ltframework" stuff back to "-framework foo"
! 7526: compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 7527: finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 7528: ;;
! 7529: esac
! 7530:
! 7531:
! 7532: # move library search paths that coincide with paths to not yet
! 7533: # installed libraries to the beginning of the library search list
! 7534: new_libs=
! 7535: for path in $notinst_path; do
! 7536: case " $new_libs " in
! 7537: *" -L$path/$objdir "*) ;;
! 7538: *)
! 7539: case " $compile_deplibs " in
! 7540: *" -L$path/$objdir "*)
! 7541: new_libs="$new_libs -L$path/$objdir" ;;
! 7542: esac
! 7543: ;;
! 7544: esac
! 7545: done
! 7546: for deplib in $compile_deplibs; do
! 7547: case $deplib in
! 7548: -L*)
! 7549: case " $new_libs " in
! 7550: *" $deplib "*) ;;
! 7551: *) new_libs="$new_libs $deplib" ;;
! 7552: esac
! 7553: ;;
! 7554: *) new_libs="$new_libs $deplib" ;;
! 7555: esac
! 7556: done
! 7557: compile_deplibs="$new_libs"
! 7558:
! 7559:
! 7560: compile_command="$compile_command $compile_deplibs"
! 7561: finalize_command="$finalize_command $finalize_deplibs"
! 7562:
! 7563: if test -n "$rpath$xrpath"; then
! 7564: # If the user specified any rpath flags, then add them.
! 7565: for libdir in $rpath $xrpath; do
! 7566: # This is the magic to use -rpath.
! 7567: case "$finalize_rpath " in
! 7568: *" $libdir "*) ;;
! 7569: *) finalize_rpath="$finalize_rpath $libdir" ;;
! 7570: esac
! 7571: done
! 7572: fi
! 7573:
! 7574: # Now hardcode the library paths
! 7575: rpath=
! 7576: hardcode_libdirs=
! 7577: for libdir in $compile_rpath $finalize_rpath; do
! 7578: if test -n "$hardcode_libdir_flag_spec"; then
! 7579: if test -n "$hardcode_libdir_separator"; then
! 7580: if test -z "$hardcode_libdirs"; then
! 7581: hardcode_libdirs="$libdir"
! 7582: else
! 7583: # Just accumulate the unique libdirs.
! 7584: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 7585: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 7586: ;;
! 7587: *)
! 7588: hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
! 7589: ;;
! 7590: esac
! 7591: fi
! 7592: else
! 7593: eval flag=\"$hardcode_libdir_flag_spec\"
! 7594: rpath="$rpath $flag"
! 7595: fi
! 7596: elif test -n "$runpath_var"; then
! 7597: case "$perm_rpath " in
! 7598: *" $libdir "*) ;;
! 7599: *) perm_rpath="$perm_rpath $libdir" ;;
! 7600: esac
! 7601: fi
! 7602: case $host in
! 7603: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
! 7604: testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
! 7605: case :$dllsearchpath: in
! 7606: *":$libdir:"*) ;;
! 7607: ::) dllsearchpath=$libdir;;
! 7608: *) dllsearchpath="$dllsearchpath:$libdir";;
! 7609: esac
! 7610: case :$dllsearchpath: in
! 7611: *":$testbindir:"*) ;;
! 7612: ::) dllsearchpath=$testbindir;;
! 7613: *) dllsearchpath="$dllsearchpath:$testbindir";;
! 7614: esac
! 7615: ;;
! 7616: esac
! 7617: done
! 7618: # Substitute the hardcoded libdirs into the rpath.
! 7619: if test -n "$hardcode_libdir_separator" &&
! 7620: test -n "$hardcode_libdirs"; then
! 7621: libdir="$hardcode_libdirs"
! 7622: eval rpath=\" $hardcode_libdir_flag_spec\"
! 7623: fi
! 7624: compile_rpath="$rpath"
! 7625:
! 7626: rpath=
! 7627: hardcode_libdirs=
! 7628: for libdir in $finalize_rpath; do
! 7629: if test -n "$hardcode_libdir_flag_spec"; then
! 7630: if test -n "$hardcode_libdir_separator"; then
! 7631: if test -z "$hardcode_libdirs"; then
! 7632: hardcode_libdirs="$libdir"
! 7633: else
! 7634: # Just accumulate the unique libdirs.
! 7635: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 7636: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 7637: ;;
! 7638: *)
! 7639: hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
! 7640: ;;
! 7641: esac
! 7642: fi
! 7643: else
! 7644: eval flag=\"$hardcode_libdir_flag_spec\"
! 7645: rpath="$rpath $flag"
! 7646: fi
! 7647: elif test -n "$runpath_var"; then
! 7648: case "$finalize_perm_rpath " in
! 7649: *" $libdir "*) ;;
! 7650: *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
! 7651: esac
! 7652: fi
! 7653: done
! 7654: # Substitute the hardcoded libdirs into the rpath.
! 7655: if test -n "$hardcode_libdir_separator" &&
! 7656: test -n "$hardcode_libdirs"; then
! 7657: libdir="$hardcode_libdirs"
! 7658: eval rpath=\" $hardcode_libdir_flag_spec\"
! 7659: fi
! 7660: finalize_rpath="$rpath"
! 7661:
! 7662: if test -n "$libobjs" && test "$build_old_libs" = yes; then
! 7663: # Transform all the library objects into standard objects.
! 7664: compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 7665: finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 7666: fi
! 7667:
! 7668: func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
! 7669:
! 7670: # template prelinking step
! 7671: if test -n "$prelink_cmds"; then
! 7672: func_execute_cmds "$prelink_cmds" 'exit $?'
! 7673: fi
! 7674:
! 7675: wrappers_required=yes
! 7676: case $host in
! 7677: *cygwin* | *mingw* )
! 7678: if test "$build_libtool_libs" != yes; then
! 7679: wrappers_required=no
! 7680: fi
! 7681: ;;
! 7682: *cegcc)
! 7683: # Disable wrappers for cegcc, we are cross compiling anyway.
! 7684: wrappers_required=no
! 7685: ;;
! 7686: *)
! 7687: if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
! 7688: wrappers_required=no
! 7689: fi
! 7690: ;;
! 7691: esac
! 7692: if test "$wrappers_required" = no; then
! 7693: # Replace the output file specification.
! 7694: compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
! 7695: link_command="$compile_command$compile_rpath"
! 7696:
! 7697: # We have no uninstalled library dependencies, so finalize right now.
! 7698: exit_status=0
! 7699: func_show_eval "$link_command" 'exit_status=$?'
! 7700:
! 7701: # Delete the generated files.
! 7702: if test -f "$output_objdir/${outputname}S.${objext}"; then
! 7703: func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
! 7704: fi
! 7705:
! 7706: exit $exit_status
! 7707: fi
! 7708:
! 7709: if test -n "$compile_shlibpath$finalize_shlibpath"; then
! 7710: compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
! 7711: fi
! 7712: if test -n "$finalize_shlibpath"; then
! 7713: finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
! 7714: fi
! 7715:
! 7716: compile_var=
! 7717: finalize_var=
! 7718: if test -n "$runpath_var"; then
! 7719: if test -n "$perm_rpath"; then
! 7720: # We should set the runpath_var.
! 7721: rpath=
! 7722: for dir in $perm_rpath; do
! 7723: rpath="$rpath$dir:"
! 7724: done
! 7725: compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
! 7726: fi
! 7727: if test -n "$finalize_perm_rpath"; then
! 7728: # We should set the runpath_var.
! 7729: rpath=
! 7730: for dir in $finalize_perm_rpath; do
! 7731: rpath="$rpath$dir:"
! 7732: done
! 7733: finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
! 7734: fi
! 7735: fi
! 7736:
! 7737: if test "$no_install" = yes; then
! 7738: # We don't need to create a wrapper script.
! 7739: link_command="$compile_var$compile_command$compile_rpath"
! 7740: # Replace the output file specification.
! 7741: link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
! 7742: # Delete the old output file.
! 7743: $opt_dry_run || $RM $output
! 7744: # Link the executable and exit
! 7745: func_show_eval "$link_command" 'exit $?'
! 7746: exit $EXIT_SUCCESS
! 7747: fi
! 7748:
! 7749: if test "$hardcode_action" = relink; then
! 7750: # Fast installation is not supported
! 7751: link_command="$compile_var$compile_command$compile_rpath"
! 7752: relink_command="$finalize_var$finalize_command$finalize_rpath"
! 7753:
! 7754: func_warning "this platform does not like uninstalled shared libraries"
! 7755: func_warning "\`$output' will be relinked during installation"
! 7756: else
! 7757: if test "$fast_install" != no; then
! 7758: link_command="$finalize_var$compile_command$finalize_rpath"
! 7759: if test "$fast_install" = yes; then
! 7760: relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
! 7761: else
! 7762: # fast_install is set to needless
! 7763: relink_command=
! 7764: fi
! 7765: else
! 7766: link_command="$compile_var$compile_command$compile_rpath"
! 7767: relink_command="$finalize_var$finalize_command$finalize_rpath"
! 7768: fi
! 7769: fi
! 7770:
! 7771: # Replace the output file specification.
! 7772: link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
! 7773:
! 7774: # Delete the old output files.
! 7775: $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
! 7776:
! 7777: func_show_eval "$link_command" 'exit $?'
! 7778:
! 7779: # Now create the wrapper script.
! 7780: func_verbose "creating $output"
! 7781:
! 7782: # Quote the relink command for shipping.
! 7783: if test -n "$relink_command"; then
! 7784: # Preserve any variables that may affect compiler behavior
! 7785: for var in $variables_saved_for_relink; do
! 7786: if eval test -z \"\${$var+set}\"; then
! 7787: relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
! 7788: elif eval var_value=\$$var; test -z "$var_value"; then
! 7789: relink_command="$var=; export $var; $relink_command"
! 7790: else
! 7791: func_quote_for_eval "$var_value"
! 7792: relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
! 7793: fi
! 7794: done
! 7795: relink_command="(cd `pwd`; $relink_command)"
! 7796: relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
! 7797: fi
! 7798:
! 7799: # Quote $ECHO for shipping.
! 7800: if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
! 7801: case $progpath in
! 7802: [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
! 7803: *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
! 7804: esac
! 7805: qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
! 7806: else
! 7807: qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
! 7808: fi
! 7809:
! 7810: # Only actually do things if not in dry run mode.
! 7811: $opt_dry_run || {
! 7812: # win32 will think the script is a binary if it has
! 7813: # a .exe suffix, so we strip it off here.
! 7814: case $output in
! 7815: *.exe) func_stripname '' '.exe' "$output"
! 7816: output=$func_stripname_result ;;
! 7817: esac
! 7818: # test for cygwin because mv fails w/o .exe extensions
! 7819: case $host in
! 7820: *cygwin*)
! 7821: exeext=.exe
! 7822: func_stripname '' '.exe' "$outputname"
! 7823: outputname=$func_stripname_result ;;
! 7824: *) exeext= ;;
! 7825: esac
! 7826: case $host in
! 7827: *cygwin* | *mingw* )
! 7828: func_dirname_and_basename "$output" "" "."
! 7829: output_name=$func_basename_result
! 7830: output_path=$func_dirname_result
! 7831: cwrappersource="$output_path/$objdir/lt-$output_name.c"
! 7832: cwrapper="$output_path/$output_name.exe"
! 7833: $RM $cwrappersource $cwrapper
! 7834: trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
! 7835:
! 7836: func_emit_cwrapperexe_src > $cwrappersource
! 7837:
! 7838: # The wrapper executable is built using the $host compiler,
! 7839: # because it contains $host paths and files. If cross-
! 7840: # compiling, it, like the target executable, must be
! 7841: # executed on the $host or under an emulation environment.
! 7842: $opt_dry_run || {
! 7843: $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
! 7844: $STRIP $cwrapper
! 7845: }
! 7846:
! 7847: # Now, create the wrapper script for func_source use:
! 7848: func_ltwrapper_scriptname $cwrapper
! 7849: $RM $func_ltwrapper_scriptname_result
! 7850: trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
! 7851: $opt_dry_run || {
! 7852: # note: this script will not be executed, so do not chmod.
! 7853: if test "x$build" = "x$host" ; then
! 7854: $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
! 7855: else
! 7856: func_emit_wrapper no > $func_ltwrapper_scriptname_result
! 7857: fi
! 7858: }
! 7859: ;;
! 7860: * )
! 7861: $RM $output
! 7862: trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
! 7863:
! 7864: func_emit_wrapper no > $output
! 7865: chmod +x $output
! 7866: ;;
! 7867: esac
! 7868: }
! 7869: exit $EXIT_SUCCESS
! 7870: ;;
! 7871: esac
! 7872:
! 7873: # See if we need to build an old-fashioned archive.
! 7874: for oldlib in $oldlibs; do
! 7875:
! 7876: if test "$build_libtool_libs" = convenience; then
! 7877: oldobjs="$libobjs_save $symfileobj"
! 7878: addlibs="$convenience"
! 7879: build_libtool_libs=no
! 7880: else
! 7881: if test "$build_libtool_libs" = module; then
! 7882: oldobjs="$libobjs_save"
! 7883: build_libtool_libs=no
! 7884: else
! 7885: oldobjs="$old_deplibs $non_pic_objects"
! 7886: if test "$preload" = yes && test -f "$symfileobj"; then
! 7887: oldobjs="$oldobjs $symfileobj"
! 7888: fi
! 7889: fi
! 7890: addlibs="$old_convenience"
! 7891: fi
! 7892:
! 7893: if test -n "$addlibs"; then
! 7894: gentop="$output_objdir/${outputname}x"
! 7895: generated="$generated $gentop"
! 7896:
! 7897: func_extract_archives $gentop $addlibs
! 7898: oldobjs="$oldobjs $func_extract_archives_result"
! 7899: fi
! 7900:
! 7901: # Do each command in the archive commands.
! 7902: if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
! 7903: cmds=$old_archive_from_new_cmds
! 7904: else
! 7905:
! 7906: # Add any objects from preloaded convenience libraries
! 7907: if test -n "$dlprefiles"; then
! 7908: gentop="$output_objdir/${outputname}x"
! 7909: generated="$generated $gentop"
! 7910:
! 7911: func_extract_archives $gentop $dlprefiles
! 7912: oldobjs="$oldobjs $func_extract_archives_result"
! 7913: fi
! 7914:
! 7915: # POSIX demands no paths to be encoded in archives. We have
! 7916: # to avoid creating archives with duplicate basenames if we
! 7917: # might have to extract them afterwards, e.g., when creating a
! 7918: # static archive out of a convenience library, or when linking
! 7919: # the entirety of a libtool archive into another (currently
! 7920: # not supported by libtool).
! 7921: if (for obj in $oldobjs
! 7922: do
! 7923: func_basename "$obj"
! 7924: $ECHO "$func_basename_result"
! 7925: done | sort | sort -uc >/dev/null 2>&1); then
! 7926: :
! 7927: else
! 7928: $ECHO "copying selected object files to avoid basename conflicts..."
! 7929: gentop="$output_objdir/${outputname}x"
! 7930: generated="$generated $gentop"
! 7931: func_mkdir_p "$gentop"
! 7932: save_oldobjs=$oldobjs
! 7933: oldobjs=
! 7934: counter=1
! 7935: for obj in $save_oldobjs
! 7936: do
! 7937: func_basename "$obj"
! 7938: objbase="$func_basename_result"
! 7939: case " $oldobjs " in
! 7940: " ") oldobjs=$obj ;;
! 7941: *[\ /]"$objbase "*)
! 7942: while :; do
! 7943: # Make sure we don't pick an alternate name that also
! 7944: # overlaps.
! 7945: newobj=lt$counter-$objbase
! 7946: func_arith $counter + 1
! 7947: counter=$func_arith_result
! 7948: case " $oldobjs " in
! 7949: *[\ /]"$newobj "*) ;;
! 7950: *) if test ! -f "$gentop/$newobj"; then break; fi ;;
! 7951: esac
! 7952: done
! 7953: func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
! 7954: oldobjs="$oldobjs $gentop/$newobj"
! 7955: ;;
! 7956: *) oldobjs="$oldobjs $obj" ;;
! 7957: esac
! 7958: done
! 7959: fi
! 7960: eval cmds=\"$old_archive_cmds\"
! 7961:
! 7962: func_len " $cmds"
! 7963: len=$func_len_result
! 7964: if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 7965: cmds=$old_archive_cmds
! 7966: else
! 7967: # the command line is too long to link in one step, link in parts
! 7968: func_verbose "using piecewise archive linking..."
! 7969: save_RANLIB=$RANLIB
! 7970: RANLIB=:
! 7971: objlist=
! 7972: concat_cmds=
! 7973: save_oldobjs=$oldobjs
! 7974: oldobjs=
! 7975: # Is there a better way of finding the last object in the list?
! 7976: for obj in $save_oldobjs
! 7977: do
! 7978: last_oldobj=$obj
! 7979: done
! 7980: eval test_cmds=\"$old_archive_cmds\"
! 7981: func_len " $test_cmds"
! 7982: len0=$func_len_result
! 7983: len=$len0
! 7984: for obj in $save_oldobjs
! 7985: do
! 7986: func_len " $obj"
! 7987: func_arith $len + $func_len_result
! 7988: len=$func_arith_result
! 7989: func_append objlist " $obj"
! 7990: if test "$len" -lt "$max_cmd_len"; then
! 7991: :
! 7992: else
! 7993: # the above command should be used before it gets too long
! 7994: oldobjs=$objlist
! 7995: if test "$obj" = "$last_oldobj" ; then
! 7996: RANLIB=$save_RANLIB
! 7997: fi
! 7998: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 7999: eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
! 8000: objlist=
! 8001: len=$len0
! 8002: fi
! 8003: done
! 8004: RANLIB=$save_RANLIB
! 8005: oldobjs=$objlist
! 8006: if test "X$oldobjs" = "X" ; then
! 8007: eval cmds=\"\$concat_cmds\"
! 8008: else
! 8009: eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
! 8010: fi
! 8011: fi
! 8012: fi
! 8013: func_execute_cmds "$cmds" 'exit $?'
! 8014: done
! 8015:
! 8016: test -n "$generated" && \
! 8017: func_show_eval "${RM}r$generated"
! 8018:
! 8019: # Now create the libtool archive.
! 8020: case $output in
! 8021: *.la)
! 8022: old_library=
! 8023: test "$build_old_libs" = yes && old_library="$libname.$libext"
! 8024: func_verbose "creating $output"
! 8025:
! 8026: # Preserve any variables that may affect compiler behavior
! 8027: for var in $variables_saved_for_relink; do
! 8028: if eval test -z \"\${$var+set}\"; then
! 8029: relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
! 8030: elif eval var_value=\$$var; test -z "$var_value"; then
! 8031: relink_command="$var=; export $var; $relink_command"
! 8032: else
! 8033: func_quote_for_eval "$var_value"
! 8034: relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
! 8035: fi
! 8036: done
! 8037: # Quote the link command for shipping.
! 8038: relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
! 8039: relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
! 8040: if test "$hardcode_automatic" = yes ; then
! 8041: relink_command=
! 8042: fi
! 8043:
! 8044: # Only create the output if not a dry run.
! 8045: $opt_dry_run || {
! 8046: for installed in no yes; do
! 8047: if test "$installed" = yes; then
! 8048: if test -z "$install_libdir"; then
! 8049: break
! 8050: fi
! 8051: output="$output_objdir/$outputname"i
! 8052: # Replace all uninstalled libtool libraries with the installed ones
! 8053: newdependency_libs=
! 8054: for deplib in $dependency_libs; do
! 8055: case $deplib in
! 8056: *.la)
! 8057: func_basename "$deplib"
! 8058: name="$func_basename_result"
! 8059: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
! 8060: test -z "$libdir" && \
! 8061: func_fatal_error "\`$deplib' is not a valid libtool archive"
! 8062: newdependency_libs="$newdependency_libs $libdir/$name"
! 8063: ;;
! 8064: *) newdependency_libs="$newdependency_libs $deplib" ;;
! 8065: esac
! 8066: done
! 8067: dependency_libs="$newdependency_libs"
! 8068: newdlfiles=
! 8069:
! 8070: for lib in $dlfiles; do
! 8071: case $lib in
! 8072: *.la)
! 8073: func_basename "$lib"
! 8074: name="$func_basename_result"
! 8075: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
! 8076: test -z "$libdir" && \
! 8077: func_fatal_error "\`$lib' is not a valid libtool archive"
! 8078: newdlfiles="$newdlfiles $libdir/$name"
! 8079: ;;
! 8080: *) newdlfiles="$newdlfiles $lib" ;;
! 8081: esac
! 8082: done
! 8083: dlfiles="$newdlfiles"
! 8084: newdlprefiles=
! 8085: for lib in $dlprefiles; do
! 8086: case $lib in
! 8087: *.la)
! 8088: # Only pass preopened files to the pseudo-archive (for
! 8089: # eventual linking with the app. that links it) if we
! 8090: # didn't already link the preopened objects directly into
! 8091: # the library:
! 8092: func_basename "$lib"
! 8093: name="$func_basename_result"
! 8094: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
! 8095: test -z "$libdir" && \
! 8096: func_fatal_error "\`$lib' is not a valid libtool archive"
! 8097: newdlprefiles="$newdlprefiles $libdir/$name"
! 8098: ;;
! 8099: esac
! 8100: done
! 8101: dlprefiles="$newdlprefiles"
! 8102: else
! 8103: newdlfiles=
! 8104: for lib in $dlfiles; do
! 8105: case $lib in
! 8106: [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
! 8107: *) abs=`pwd`"/$lib" ;;
! 8108: esac
! 8109: newdlfiles="$newdlfiles $abs"
! 8110: done
! 8111: dlfiles="$newdlfiles"
! 8112: newdlprefiles=
! 8113: for lib in $dlprefiles; do
! 8114: case $lib in
! 8115: [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
! 8116: *) abs=`pwd`"/$lib" ;;
! 8117: esac
! 8118: newdlprefiles="$newdlprefiles $abs"
! 8119: done
! 8120: dlprefiles="$newdlprefiles"
! 8121: fi
! 8122: $RM $output
! 8123: # place dlname in correct position for cygwin
! 8124: tdlname=$dlname
! 8125: case $host,$output,$installed,$module,$dlname in
! 8126: *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
! 8127: esac
! 8128: $ECHO > $output "\
! 8129: # $outputname - a libtool library file
! 8130: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 8131: #
! 8132: # Please DO NOT delete this file!
! 8133: # It is necessary for linking the library.
! 8134:
! 8135: # The name that we can dlopen(3).
! 8136: dlname='$tdlname'
! 8137:
! 8138: # Names of this library.
! 8139: library_names='$library_names'
! 8140:
! 8141: # The name of the static archive.
! 8142: old_library='$old_library'
! 8143:
! 8144: # Linker flags that can not go in dependency_libs.
! 8145: inherited_linker_flags='$new_inherited_linker_flags'
! 8146:
! 8147: # Libraries that this one depends upon.
! 8148: dependency_libs='$dependency_libs'
! 8149:
! 8150: # Names of additional weak libraries provided by this library
! 8151: weak_library_names='$weak_libs'
! 8152:
! 8153: # Version information for $libname.
! 8154: current=$current
! 8155: age=$age
! 8156: revision=$revision
! 8157:
! 8158: # Is this an already installed library?
! 8159: installed=$installed
! 8160:
! 8161: # Should we warn about portability when linking against -modules?
! 8162: shouldnotlink=$module
! 8163:
! 8164: # Files to dlopen/dlpreopen
! 8165: dlopen='$dlfiles'
! 8166: dlpreopen='$dlprefiles'
! 8167:
! 8168: # Directory that this library needs to be installed in:
! 8169: libdir='$install_libdir'"
! 8170: if test "$installed" = no && test "$need_relink" = yes; then
! 8171: $ECHO >> $output "\
! 8172: relink_command=\"$relink_command\""
! 8173: fi
! 8174: done
! 8175: }
! 8176:
! 8177: # Do a symbolic link so that the libtool archive can be found in
! 8178: # LD_LIBRARY_PATH before the program is installed.
! 8179: func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
! 8180: ;;
! 8181: esac
! 8182: exit $EXIT_SUCCESS
! 8183: }
! 8184:
! 8185: { test "$mode" = link || test "$mode" = relink; } &&
! 8186: func_mode_link ${1+"$@"}
! 8187:
! 8188:
! 8189: # func_mode_uninstall arg...
! 8190: func_mode_uninstall ()
! 8191: {
! 8192: $opt_debug
! 8193: RM="$nonopt"
! 8194: files=
! 8195: rmforce=
! 8196: exit_status=0
! 8197:
! 8198: # This variable tells wrapper scripts just to set variables rather
! 8199: # than running their programs.
! 8200: libtool_install_magic="$magic"
! 8201:
! 8202: for arg
! 8203: do
! 8204: case $arg in
! 8205: -f) RM="$RM $arg"; rmforce=yes ;;
! 8206: -*) RM="$RM $arg" ;;
! 8207: *) files="$files $arg" ;;
! 8208: esac
! 8209: done
! 8210:
! 8211: test -z "$RM" && \
! 8212: func_fatal_help "you must specify an RM program"
! 8213:
! 8214: rmdirs=
! 8215:
! 8216: origobjdir="$objdir"
! 8217: for file in $files; do
! 8218: func_dirname "$file" "" "."
! 8219: dir="$func_dirname_result"
! 8220: if test "X$dir" = X.; then
! 8221: objdir="$origobjdir"
! 8222: else
! 8223: objdir="$dir/$origobjdir"
! 8224: fi
! 8225: func_basename "$file"
! 8226: name="$func_basename_result"
! 8227: test "$mode" = uninstall && objdir="$dir"
! 8228:
! 8229: # Remember objdir for removal later, being careful to avoid duplicates
! 8230: if test "$mode" = clean; then
! 8231: case " $rmdirs " in
! 8232: *" $objdir "*) ;;
! 8233: *) rmdirs="$rmdirs $objdir" ;;
! 8234: esac
! 8235: fi
! 8236:
! 8237: # Don't error if the file doesn't exist and rm -f was used.
! 8238: if { test -L "$file"; } >/dev/null 2>&1 ||
! 8239: { test -h "$file"; } >/dev/null 2>&1 ||
! 8240: test -f "$file"; then
! 8241: :
! 8242: elif test -d "$file"; then
! 8243: exit_status=1
! 8244: continue
! 8245: elif test "$rmforce" = yes; then
! 8246: continue
! 8247: fi
! 8248:
! 8249: rmfiles="$file"
! 8250:
! 8251: case $name in
! 8252: *.la)
! 8253: # Possibly a libtool archive, so verify it.
! 8254: if func_lalib_p "$file"; then
! 8255: func_source $dir/$name
! 8256:
! 8257: # Delete the libtool libraries and symlinks.
! 8258: for n in $library_names; do
! 8259: rmfiles="$rmfiles $objdir/$n"
! 8260: done
! 8261: test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
! 8262:
! 8263: case "$mode" in
! 8264: clean)
! 8265: case " $library_names " in
! 8266: # " " in the beginning catches empty $dlname
! 8267: *" $dlname "*) ;;
! 8268: *) rmfiles="$rmfiles $objdir/$dlname" ;;
! 8269: esac
! 8270: test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
! 8271: ;;
! 8272: uninstall)
! 8273: if test -n "$library_names"; then
! 8274: # Do each command in the postuninstall commands.
! 8275: func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
! 8276: fi
! 8277:
! 8278: if test -n "$old_library"; then
! 8279: # Do each command in the old_postuninstall commands.
! 8280: func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
! 8281: fi
! 8282: # FIXME: should reinstall the best remaining shared library.
! 8283: ;;
! 8284: esac
! 8285: fi
! 8286: ;;
! 8287:
! 8288: *.lo)
! 8289: # Possibly a libtool object, so verify it.
! 8290: if func_lalib_p "$file"; then
! 8291:
! 8292: # Read the .lo file
! 8293: func_source $dir/$name
! 8294:
! 8295: # Add PIC object to the list of files to remove.
! 8296: if test -n "$pic_object" &&
! 8297: test "$pic_object" != none; then
! 8298: rmfiles="$rmfiles $dir/$pic_object"
! 8299: fi
! 8300:
! 8301: # Add non-PIC object to the list of files to remove.
! 8302: if test -n "$non_pic_object" &&
! 8303: test "$non_pic_object" != none; then
! 8304: rmfiles="$rmfiles $dir/$non_pic_object"
! 8305: fi
! 8306: fi
! 8307: ;;
! 8308:
! 8309: *)
! 8310: if test "$mode" = clean ; then
! 8311: noexename=$name
! 8312: case $file in
! 8313: *.exe)
! 8314: func_stripname '' '.exe' "$file"
! 8315: file=$func_stripname_result
! 8316: func_stripname '' '.exe' "$name"
! 8317: noexename=$func_stripname_result
! 8318: # $file with .exe has already been added to rmfiles,
! 8319: # add $file without .exe
! 8320: rmfiles="$rmfiles $file"
! 8321: ;;
! 8322: esac
! 8323: # Do a test to see if this is a libtool program.
! 8324: if func_ltwrapper_p "$file"; then
! 8325: if func_ltwrapper_executable_p "$file"; then
! 8326: func_ltwrapper_scriptname "$file"
! 8327: relink_command=
! 8328: func_source $func_ltwrapper_scriptname_result
! 8329: rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
! 8330: else
! 8331: relink_command=
! 8332: func_source $dir/$noexename
! 8333: fi
! 8334:
! 8335: # note $name still contains .exe if it was in $file originally
! 8336: # as does the version of $file that was added into $rmfiles
! 8337: rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
! 8338: if test "$fast_install" = yes && test -n "$relink_command"; then
! 8339: rmfiles="$rmfiles $objdir/lt-$name"
! 8340: fi
! 8341: if test "X$noexename" != "X$name" ; then
! 8342: rmfiles="$rmfiles $objdir/lt-${noexename}.c"
! 8343: fi
! 8344: fi
! 8345: fi
! 8346: ;;
! 8347: esac
! 8348: func_show_eval "$RM $rmfiles" 'exit_status=1'
! 8349: done
! 8350: objdir="$origobjdir"
! 8351:
! 8352: # Try to remove the ${objdir}s in the directories where we deleted files
! 8353: for dir in $rmdirs; do
! 8354: if test -d "$dir"; then
! 8355: func_show_eval "rmdir $dir >/dev/null 2>&1"
! 8356: fi
! 8357: done
! 8358:
! 8359: exit $exit_status
! 8360: }
! 8361:
! 8362: { test "$mode" = uninstall || test "$mode" = clean; } &&
! 8363: func_mode_uninstall ${1+"$@"}
! 8364:
! 8365: test -z "$mode" && {
! 8366: help="$generic_help"
! 8367: func_fatal_help "you must specify a MODE"
! 8368: }
! 8369:
! 8370: test -z "$exec_cmd" && \
! 8371: func_fatal_help "invalid operation mode \`$mode'"
! 8372:
! 8373: if test -n "$exec_cmd"; then
! 8374: eval exec "$exec_cmd"
! 8375: exit $EXIT_FAILURE
! 8376: fi
! 8377:
! 8378: exit $exit_status
! 8379:
! 8380:
! 8381: # The TAGs below are defined such that we never get into a situation
! 8382: # in which we disable both kinds of libraries. Given conflicting
! 8383: # choices, we go for a static library, that is the most portable,
! 8384: # since we can't tell whether shared libraries were disabled because
! 8385: # the user asked for that or because the platform doesn't support
! 8386: # them. This is particularly important on AIX, because we don't
! 8387: # support having both static and shared libraries enabled at the same
! 8388: # time on that platform, so we default to a shared-only configuration.
! 8389: # If a disable-shared tag is given, we'll fallback to a static-only
! 8390: # configuration. But we'll never go from static-only to shared-only.
! 8391:
! 8392: # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
! 8393: build_libtool_libs=no
! 8394: build_old_libs=yes
! 8395: # ### END LIBTOOL TAG CONFIG: disable-shared
! 8396:
! 8397: # ### BEGIN LIBTOOL TAG CONFIG: disable-static
! 8398: build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
! 8399: # ### END LIBTOOL TAG CONFIG: disable-static
! 8400:
! 8401: # Local Variables:
! 8402: # mode:shell-script
! 8403: # sh-indentation:2
! 8404: # End:
! 8405: # vi:sw=2
! 8406:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ltmain.sh CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / libevent