Annotation of embedaddon/libiconv/libcharset/INSTALL.generic, revision 1.1

1.1     ! misho       1: Basic Installation
        !             2: ==================
        !             3: 
        !             4:    These are generic installation instructions.
        !             5: 
        !             6:    The `configure' shell script attempts to guess correct values for
        !             7: various system-dependent variables used during compilation.  It uses
        !             8: those values to create a `Makefile' in each directory of the package.
        !             9: It may also create one or more `.h' files containing system-dependent
        !            10: definitions.  Finally, it creates a shell script `config.status' that
        !            11: you can run in the future to recreate the current configuration, a file
        !            12: `config.cache' that saves the results of its tests to speed up
        !            13: reconfiguring, and a file `config.log' containing compiler output
        !            14: (useful mainly for debugging `configure').
        !            15: 
        !            16:    If you need to do unusual things to compile the package, please try
        !            17: to figure out how `configure' could check whether to do them, and mail
        !            18: diffs or instructions to the address given in the `README' so they can
        !            19: be considered for the next release.  If at some point `config.cache'
        !            20: contains results you don't want to keep, you may remove or edit it.
        !            21: 
        !            22:    The file `configure.ac' is used to create `configure' by a program
        !            23: called `autoconf'.  You only need `configure.ac' if you want to change
        !            24: it or regenerate `configure' using a newer version of `autoconf'.
        !            25: 
        !            26: The simplest way to compile this package is:
        !            27: 
        !            28:   1. `cd' to the directory containing the package's source code and type
        !            29:      `./configure' to configure the package for your system.  If you're
        !            30:      using `csh' on an old version of System V, you might need to type
        !            31:      `sh ./configure' instead to prevent `csh' from trying to execute
        !            32:      `configure' itself.
        !            33: 
        !            34:      Running `configure' takes awhile.  While running, it prints some
        !            35:      messages telling which features it is checking for.
        !            36: 
        !            37:   2. Type `make' to compile the package.
        !            38: 
        !            39:   3. Optionally, type `make check' to run any self-tests that come with
        !            40:      the package.
        !            41: 
        !            42:   4. Type `make install' to install the programs and any data files and
        !            43:      documentation.
        !            44: 
        !            45:   5. You can remove the program binaries and object files from the
        !            46:      source code directory by typing `make clean'.  To also remove the
        !            47:      files that `configure' created (so you can compile the package for
        !            48:      a different kind of computer), type `make distclean'.  There is
        !            49:      also a `make maintainer-clean' target, but that is intended mainly
        !            50:      for the package's developers.  If you use it, you may have to get
        !            51:      all sorts of other programs in order to regenerate files that came
        !            52:      with the distribution.
        !            53: 
        !            54: Compilers and Options
        !            55: =====================
        !            56: 
        !            57:    Some systems require unusual options for compilation or linking that
        !            58: the `configure' script does not know about.  You can give `configure'
        !            59: initial values for variables by setting them in the environment.  Using
        !            60: a Bourne-compatible shell, you can do that on the command line like
        !            61: this:
        !            62:      CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
        !            63: 
        !            64: Or on systems that have the `env' program, you can do it like this:
        !            65:      env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
        !            66: 
        !            67: Compiling For Multiple Architectures
        !            68: ====================================
        !            69: 
        !            70:    You can compile the package for more than one kind of computer at the
        !            71: same time, by placing the object files for each architecture in their
        !            72: own directory.  To do this, you must use a version of `make' that
        !            73: supports the `VPATH' variable, such as GNU `make'.  `cd' to the
        !            74: directory where you want the object files and executables to go and run
        !            75: the `configure' script.  `configure' automatically checks for the
        !            76: source code in the directory that `configure' is in and in `..'.
        !            77: 
        !            78:    If you have to use a `make' that does not supports the `VPATH'
        !            79: variable, you have to compile the package for one architecture at a time
        !            80: in the source code directory.  After you have installed the package for
        !            81: one architecture, use `make distclean' before reconfiguring for another
        !            82: architecture.
        !            83: 
        !            84:    On MacOS X 10.5 and later systems, you can create libraries and
        !            85: executables that work on multiple system types--known as "fat" or
        !            86: "universal" binaries--by specifying multiple '-arch' options to the
        !            87: compiler but only a single '-arch' option to the preprocessor.  Like
        !            88: this:
        !            89: 
        !            90:      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
        !            91:                  CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
        !            92:                  CPP="gcc -E" CXXCPP="g++ -E"
        !            93: 
        !            94:    This is not guaranteed to produce working output in all cases.  You
        !            95: may have to build one architecture at a time and combine the results
        !            96: using the 'lipo' tool if you have problems.
        !            97: 
        !            98: Installation Names
        !            99: ==================
        !           100: 
        !           101:    By default, `make install' will install the package's files in
        !           102: `/usr/local/bin', `/usr/local/man', etc.  You can specify an
        !           103: installation prefix other than `/usr/local' by giving `configure' the
        !           104: option `--prefix=PATH'.
        !           105: 
        !           106:    You can specify separate installation prefixes for
        !           107: architecture-specific files and architecture-independent files.  If you
        !           108: give `configure' the option `--exec-prefix=PATH', the package will use
        !           109: PATH as the prefix for installing programs and libraries.
        !           110: Documentation and other data files will still use the regular prefix.
        !           111: 
        !           112:    In addition, if you use an unusual directory layout you can give
        !           113: options like `--bindir=PATH' to specify different values for particular
        !           114: kinds of files.  Run `configure --help' for a list of the directories
        !           115: you can set and what kinds of files go in them.
        !           116: 
        !           117:    If the package supports it, you can cause programs to be installed
        !           118: with an extra prefix or suffix on their names by giving `configure' the
        !           119: option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
        !           120: 
        !           121: Relocatable Installation
        !           122: ========================
        !           123: 
        !           124:    By default, `make install' will install a package with hardwired
        !           125: file names, and the package will not work correctly when copied or
        !           126: moved to a different location in the filesystem.
        !           127: 
        !           128:    Some packages pay attention to the `--enable-relocatable' option to
        !           129: `configure'.  This option makes the entire installed package
        !           130: relocatable.  This means, it can be moved or copied to a different
        !           131: location on the filesystem.  It is possible to make symlinks to the
        !           132: installed and moved programs, and invoke them through the symlink.  It
        !           133: is possible to do the same thing  with a hard link _only_ if the hard
        !           134: linked file is in the same directory as the real program.
        !           135: 
        !           136:    For reliability it is best to give together with --enable-relocatable
        !           137: a `--prefix' option pointing to an otherwise unused (and never used
        !           138: again) directory, for example, `--prefix=/tmp/inst$$'.  This is
        !           139: recommended because on some OSes the executables remember the location
        !           140: of shared libraries (and prefer them over LD_LIBRARY_PATH !), therefore
        !           141: such an executable will look for its shared libraries first in the
        !           142: original installation directory and only then in the current
        !           143: installation directory.
        !           144: 
        !           145:    Installation with `--enable-relocatable' will not work for setuid /
        !           146: setgid executables.  (This is because such an executable kills its
        !           147: LD_LIBRARY_PATH variable when it is launched.)
        !           148: 
        !           149:    The runtime penalty and size penalty are nearly zero on Linux 2.2 or
        !           150: newer (just one system call more when an executable is launched), and
        !           151: small on other systems (the wrapper program just sets an environment
        !           152: variable and execs the real program).
        !           153: 
        !           154: Optional Features
        !           155: =================
        !           156: 
        !           157:    Some packages pay attention to `--enable-FEATURE' options to
        !           158: `configure', where FEATURE indicates an optional part of the package.
        !           159: They may also pay attention to `--with-PACKAGE' options, where PACKAGE
        !           160: is something like `gnu-as' or `x' (for the X Window System).  The
        !           161: `README' should mention any `--enable-' and `--with-' options that the
        !           162: package recognizes.
        !           163: 
        !           164:    For packages that use the X Window System, `configure' can usually
        !           165: find the X include and library files automatically, but if it doesn't,
        !           166: you can use the `configure' options `--x-includes=DIR' and
        !           167: `--x-libraries=DIR' to specify their locations.
        !           168: 
        !           169:    For packages that use the GNU libiconv library, you can use the
        !           170: `configure' option `--with-libiconv-prefix' to specify the prefix you
        !           171: used while installing GNU libiconv.  This option is not necessary if
        !           172: that other prefix is the same as the one now specified through --prefix.
        !           173: 
        !           174:    For packages that use the GNU libintl library, you can use the
        !           175: `configure' option `--with-libintl-prefix' to specify the prefix you
        !           176: used while installing GNU gettext-runtime.  This option is not necessary if
        !           177: that other prefix is the same as the one now specified through --prefix.
        !           178: 
        !           179: Particular Systems
        !           180: ==================
        !           181: 
        !           182:    On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
        !           183: is not installed, it is recommended to use the following options in order
        !           184: to use an ANSI C compiler:
        !           185: 
        !           186:      ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
        !           187: 
        !           188: and if that doesn't work, install pre-built binaries of GCC for HP-UX.
        !           189: 
        !           190:    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
        !           191: parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
        !           192: a workaround.  If GNU CC is not installed, it is therefore recommended
        !           193: to try
        !           194: 
        !           195:      ./configure CC="cc"
        !           196: 
        !           197: and if that doesn't work, try
        !           198: 
        !           199:      ./configure CC="cc -nodtk"
        !           200: 
        !           201:    On AIX 3, the C include files by default don't define some necessary
        !           202: prototype declarations.  If GNU CC is not installed, it is recommended to
        !           203: use the following options:
        !           204: 
        !           205:      ./configure CC="xlc -D_ALL_SOURCE"
        !           206: 
        !           207:    On BeOS, user installed software goes in /boot/home/config, not
        !           208: /usr/local.  It is recommended to use the following options:
        !           209: 
        !           210:      ./configure --prefix=/boot/home/config
        !           211: 
        !           212: Specifying the System Type
        !           213: ==========================
        !           214: 
        !           215:    There may be some features `configure' can not figure out
        !           216: automatically, but needs to determine by the type of host the package
        !           217: will run on.  Usually `configure' can figure that out, but if it prints
        !           218: a message saying it can not guess the host type, give it the
        !           219: `--host=TYPE' option.  TYPE can either be a short name for the system
        !           220: type, such as `sun4', or a canonical name with three fields:
        !           221:      CPU-COMPANY-SYSTEM
        !           222: 
        !           223: See the file `config.sub' for the possible values of each field.  If
        !           224: `config.sub' isn't included in this package, then this package doesn't
        !           225: need to know the host type.
        !           226: 
        !           227:    If you are building compiler tools for cross-compiling, you can also
        !           228: use the `--target=TYPE' option to select the type of system they will
        !           229: produce code for and the `--build=TYPE' option to select the type of
        !           230: system on which you are compiling the package.
        !           231: 
        !           232: Sharing Defaults
        !           233: ================
        !           234: 
        !           235:    If you want to set default values for `configure' scripts to share,
        !           236: you can create a site shell script called `config.site' that gives
        !           237: default values for variables like `CC', `cache_file', and `prefix'.
        !           238: `configure' looks for `PREFIX/share/config.site' if it exists, then
        !           239: `PREFIX/etc/config.site' if it exists.  Or, you can set the
        !           240: `CONFIG_SITE' environment variable to the location of the site script.
        !           241: A warning: not all `configure' scripts look for a site script.
        !           242: 
        !           243: Operation Controls
        !           244: ==================
        !           245: 
        !           246:    `configure' recognizes the following options to control how it
        !           247: operates.
        !           248: 
        !           249: `--cache-file=FILE'
        !           250:      Use and save the results of the tests in FILE instead of
        !           251:      `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
        !           252:      debugging `configure'.
        !           253: 
        !           254: `--help'
        !           255:      Print a summary of the options to `configure', and exit.
        !           256: 
        !           257: `--quiet'
        !           258: `--silent'
        !           259: `-q'
        !           260:      Do not print messages saying which checks are being made.  To
        !           261:      suppress all normal output, redirect it to `/dev/null' (any error
        !           262:      messages will still be shown).
        !           263: 
        !           264: `--srcdir=DIR'
        !           265:      Look for the package's source code in directory DIR.  Usually
        !           266:      `configure' can determine that directory automatically.
        !           267: 
        !           268: `--version'
        !           269:      Print the version of Autoconf used to generate the `configure'
        !           270:      script, and exit.
        !           271: 
        !           272: `configure' also accepts some other, not widely useful, options.
        !           273: 

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>