Annotation of embedaddon/libiconv/libcharset/djgpp/config.sed, revision 1.1
1.1 ! misho 1: # DJGPP specific configuration file.
! 2: # Sed script for additional DJGPP specific editing
! 3: # of the configure script generated by autoconf 2.60.
! 4:
! 5:
! 6: # Additional editing of Makefiles
! 7: /^".*ac_file_inputs.*tmp\/out$/ a\
! 8: cat > "$tmp/subs-3.sed" << eof_djgpp\
! 9: # DJGPP specific Makefile changes.\
! 10: s,\\.deps,_deps,g\
! 11: s,\\.libs,_libs,g\
! 12: s,\\.new\\.,_new.,g\
! 13: s,\\.old\\.,_old.,g\
! 14: s,\\.tab\\.,_tab.,g\
! 15: s,config\\.h\\.in,config.h-in,g\
! 16: s,\\.\\([1-9]\\)\\.html,.\\1-html,g\
! 17: s,\\.html,-html,g\
! 18: s,libcharset\\.h\\.in,libcharset.h-in,g\
! 19: s,localcharset\\.h\\.inst,localcharset_h.ins,g\
! 20: s,localcharset\\.h\\.in,localcharset.h-in,g\
! 21: s,localcharset\\.h\\.build\\.in,localcharset.h-build-in,g\
! 22: s,Makefile\\.am\\.in,Makefile.am-in,g\
! 23: s,Makefile\\.in\\.in,Makefile.in-in,g\
! 24: /^\\.y\\.c:/,/^$/ {\
! 25: /\\\$(YACCCOMPILE)/ {\
! 26: a\\\\\
! 27: -@test -f y.tab.c && mv -f y.tab.c y_tab.c\\\\\
! 28: -@test -f y.tab.h && mv -f y.tab.h y_tab.h\
! 29: }\
! 30: }\
! 31: eof_djgpp\
! 32: sed -f "\$tmp/subs-3.sed" \$tmp/out > \$tmp/out.djgpp\
! 33: mv -f \$tmp/out.djgpp \$tmp/out
! 34:
! 35:
! 36: # Rename config.h.in into config.h-in
! 37: /ac_config_headers=/s|config\.h|&:config.h-in|g
! 38: /CONFIG_HEADERS=/ s|config\.h\.in|&:config.h-in|2
! 39:
! 40: # Rename localcharset.h.build.in, localcharset.h.inst, localcharset.h.in and Makefile.in.in into localcharset.h-build-in, localcharset_h.ins, localcharset.h-in and Makefile.in-in
! 41: /ac_config_files=/ {
! 42: s|localcharset\.h\.build\.in|localcharset.h-build-in|
! 43: s|localcharset\.h\.inst|localcharset_h.ins|
! 44: s|localcharset\.h\.in|localcharset.h-in|
! 45: s|po/Makefile\.in|&:po/Makefile.in-in|
! 46: }
! 47: /CONFIG_FILES=/ {
! 48: s|localcharset\.h\.build\.in|localcharset.h-build-in|
! 49: s|localcharset\.h\.inst|localcharset_h.ins|
! 50: s|localcharset\.h\.in|localcharset.h-in|
! 51: s|po/Makefile\.in|&:po/Makefile.in-in|2
! 52: }
! 53:
! 54:
! 55: # We always use _deps and _libs instead of .deps and .libs, because
! 56: # the latter is an invalid name on 8+3 MS-DOS file system. This makes
! 57: # the generated Makefiles good for every DJGPP installation, not only
! 58: # the one where the package was configured (which could happen to be
! 59: # a Windows box, where leading dots in file names are allowed).
! 60: s,\.deps,_deps,g
! 61: s,\.libs,_libs,g
! 62: /^rmdir[ ]*\.tst/ i\
! 63: am__leading_dot=_
! 64:
! 65: # Replace (command) > /dev/null with `command > /dev/null`, since
! 66: # parenthesized commands always return zero status in the ported Bash,
! 67: # even if the named command doesn't exist
! 68: /if ([^|;`]*null/{
! 69: s,(,`,
! 70: s,),,
! 71: /null[ ]*2>&1/ s,2>&1,&`,
! 72: /null.*null/ s,null.*null,&`,
! 73: /null.*null/ !{
! 74: /null[ ]*2>&1/ !s,null,&`,
! 75: }
! 76: }
! 77:
! 78: # DOS-style absolute file names should be supported as well
! 79: /\*) top_srcdir=/s,/\*,[\\\\/]* | ?:[\\\\/]*,
! 80:
! 81: # The following two items are changes needed for configuring
! 82: # and compiling across partitions.
! 83: # 1) The given srcdir value is always translated from the
! 84: # "x:" syntax into "/dev/x" syntax while we run configure.
! 85: /^[ ]*-srcdir=\*.*$/ a\
! 86: ac_optarg=`echo "$ac_optarg" | sed "s,^\\([A-Za-z]\\):,/dev/\\1,"`
! 87: /set X `ls -Lt \$srcdir/ i\
! 88: if `echo $srcdir | grep "^/dev/" - > /dev/null`; then\
! 89: srcdir=`echo "$srcdir" | sed -e "s%^/dev/%%" -e "s%/%:/%"`\
! 90: fi
! 91:
! 92: # Autoconf 2.52e generated configure scripts
! 93: # write absolute paths into Makefiles and bison.in
! 94: # making them useless for DJGPP installations for
! 95: # which the package has not been configured for.
! 96: /MISSING=/,/^$/ {
! 97: /^fi$/ a\
! 98: am_missing_run=`echo "$am_missing_run" | sed 's%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%'`
! 99: }
! 100: /^install_sh=/a\
! 101: install_sh=`echo "$install_sh" | sed 's%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%'`
! 102:
! 103: # This will only work if the assumption that the
! 104: # testsuite is ran from the following path:
! 105: # ${top_srcdir}/tests/testsuite.dir
! 106: # holds. The explicit names are of no importance.
! 107: # ../../. == ${top_srcdir}
! 108: #/^esac$/,/^ac_abs_srcdir=/ {
! 109: /^ac_abs_srcdir=/ i\
! 110: ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%"`\
! 111: ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%"`\
! 112: ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%"`
! 113: #ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%"`
! 114: /^ac_abs_srcdir=/ a\
! 115: for dj_dir in $ac_abs_builddir $ac_abs_top_builddir $ac_abs_top_srcdir $ac_abs_srcdir\
! 116: do\
! 117: ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%//%/%g"`\
! 118: ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%//%/%g"`\
! 119: ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%//%/%g"`\
! 120: ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%//%/%g"`\
! 121: done
! 122:
! 123: # Add DJGPP version information.
! 124: /^#define VERSION/ s/\$VERSION/& (DJGPP port (r1))/
! 125:
! 126: # We need makeinfo to make the html formated docs.
! 127: /\$am_missing_run[ ]*makeinfo/ s,\$am_missing_run,,
! 128:
! 129: # The path to the FORTRAN compiler and libraries
! 130: # shall contain no absolute path reference so it
! 131: # will be good for all djgpp installations.
! 132: /^FLIBS="\$ac_cv_flibs"/ i\
! 133: ac_djgpp_path=`echo "$DJDIR" | sed 's%\\\\\\%/%g' | tr $as_cr_LETTERS $as_cr_letters`\
! 134: ac_cv_flibs=`echo "$ac_cv_flibs" | sed "s%-L$ac_djgpp_path%-L/dev/env/DJDIR%g"`
! 135:
! 136: # Autoconf generated configure scripts write absolute
! 137: # paths of certain header files into Makefiles making
! 138: # them useless for DJGPP installations for which the
! 139: # package has not been configured for.
! 140: /^.*echo "\$as_me:\$LINENO: result: \$gl_cv_absolute_.*$/ {
! 141: h
! 142: s,^.*\(gl_cv_absolute_\)\([a-z0-9_]*\)\(_h\).*$,\1\2\3=`echo $\1\2\3 | sed "s%[^:]:.*/include/%/dev/env/DJDIR/include/%"`,
! 143: G
! 144: }
! 145: /^.*echo "\$as_me:\$LINENO: result: \$gl_cv_full_.*$/ {
! 146: h
! 147: s,^.*\(gl_cv_full_\)\([a-z0-9_]*\)\(_h\).*$,\1\2\3=`echo $\1\2\3 | sed "s%[^:]:.*/include/%/dev/env/DJDIR/include/%"`,
! 148: G
! 149: }
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>