Return to Makefile.in CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / libiconv / src

libiconv 1.16

# Makefile for libiconv/src

#### Start of system configuration section. ####

# Directories used by "make":
srcdir = @srcdir@
top_srcdir = @top_srcdir@

# Directories used by "make install":
prefix = @prefix@
local_prefix = /usr/local
exec_prefix = @exec_prefix@
bindir = @bindir@
libdir = @libdir@
datarootdir = @datarootdir@
datadir = @datadir@
localedir = @localedir@

# Programs used by "make":
CC = @CC@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
INCLUDES = -I. -I$(srcdir) -I.. -I../include -I$(srcdir)/../include -I../srclib -I$(srcdir)/../srclib
LIBTOOL = @LIBTOOL@
LIBTOOL_COMPILE = $(LIBTOOL) --mode=compile
LIBTOOL_LINK = $(LIBTOOL) --mode=link
LIBTOOL_INSTALL = $(LIBTOOL) --mode=install
LIBTOOL_UNINSTALL = $(LIBTOOL) --mode=uninstall
WINDRES = @WINDRES@
RM = rm -f
@SET_MAKE@

# Programs used by "make install":
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
mkinstalldirs = $(SHELL) @top_srcdir@/build-aux/mkinstalldirs

# Programs used by "make install-strip":
STRIP = @STRIP@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
install_sh = @install_sh@

#### End of system configuration section. ####

SHELL = @SHELL@

PACKAGE_VERSION = @VERSION@

# Needed by $(LIBTOOL).
top_builddir = ..

# Needed by SET_RELOCATABLE.
EXEEXT = @EXEEXT@

# Needed by RELOCATABLE_LDFLAGS.
host = @host@

OBJECTS_RES_yes = iconv.res
OBJECTS_RES_no =

# We cannot link with libintl until libiconv is installed. (When we call
# libtool with arguments "../lib/libiconv.la -lintl", libtool will call ld
# with "../lib/.libs/libiconv.so $libdir/libintl.so $libdir/libiconv.so",
# (remember that $libdir/libintl.la lists $libdir/libiconv.so as a dependency),
# and this gives a fatal linker error on Solaris because the two libiconv.so
# files are different but have the same soname.
# So we can link the iconv executable only after we have installed libiconv,
# i.e. during "make install". The intermediate 'iconv' executable is built
# without internationalization and not linked with libintl.

all : iconv_no_i18n$(EXEEXT) iconv.@OBJEXT@ $(OBJECTS_RES_@WOE32@)

# This is the temporary iconv executable, without internationalization.
iconv_no_i18n$(EXEEXT) : iconv_no_i18n.@OBJEXT@ ../lib/libiconv.la $(OBJECTS_RES_@WOE32@)
	$(LIBTOOL_LINK) $(CC) $(LDFLAGS) $(CFLAGS) iconv_no_i18n.@OBJEXT@ ../srclib/libicrt.a ../lib/libiconv.la $(OBJECTS_RES_@WOE32@) -o $@

iconv_no_i18n.@OBJEXT@ : $(srcdir)/iconv_no_i18n.c $(srcdir)/iconv.c
	$(CC) -c $(INCLUDES) -I../lib $(CFLAGS) $(CPPFLAGS) -DINSTALLDIR=\"$(bindir)\" -DLOCALEDIR=\"$(localedir)\" $(srcdir)/iconv_no_i18n.c

iconv.@OBJEXT@ : $(srcdir)/iconv.c
	$(CC) -c $(INCLUDES) -I../lib $(CFLAGS) $(CPPFLAGS) -DINSTALLDIR=\"$(bindir)\" -DLOCALEDIR=\"$(localedir)\" $(srcdir)/iconv.c

iconv.res : $(srcdir)/../windows/iconv.rc
	$(WINDRES) `$(SHELL) $(srcdir)/../windows/windres-options --escape $(PACKAGE_VERSION)` -i $(srcdir)/../windows/iconv.rc -o iconv.res --output-format=coff

# The following rule is necessary to avoid a toplevel "make -n check" failure.
../lib/libiconv.la :
	cd ../lib && $(MAKE) libiconv.la

# Support for relocatability.
RELOCATABLE_LIBRARY_PATH = $(libdir)
RELOCATABLE_SRC_DIR = $(top_srcdir)/srclib
RELOCATABLE_BUILD_DIR = ../srclib
RELOCATABLE_CONFIG_H_DIR = ..
RELOCATABLE_LDFLAGS = @RELOCATABLE_LDFLAGS@
RELOCATABLE_STRIP = :
INSTALL_PROGRAM_ENV = @INSTALL_PROGRAM_ENV@
iconv_LDFLAGS = `if test -n '$(RELOCATABLE_LDFLAGS)'; then $(RELOCATABLE_LDFLAGS) $(bindir); fi`

# During "make install", we can build the final iconv executable.
# On HP-UX, in order to ensure that the new libiconv.sl will override the old
# one that is hardcoded in libintl.sl, we need to mention libiconv.sl before
# libintl.sl on the link command line. We have to bypass libtool in order to
# achieve this.
# On Solaris, the linker gives an error if we are using libintl.so and it
# refers to a libiconv.so in $prefix/lib since then it sees two libiconv.so's,
# one in $prefix/lib and one in ../lib/.libs. So we have to avoid using
# ../lib/libiconv.la entirely.
install : all force
	if [ ! -d $(DESTDIR)$(bindir) ] ; then $(mkinstalldirs) $(DESTDIR)$(bindir) ; fi
	case "@host_os@" in \
	  hpux*) $(CC) $(LDFLAGS) $(CFLAGS) $(iconv_LDFLAGS) iconv.@OBJEXT@ ../srclib/libicrt.a -L$(DESTDIR)$(libdir) -liconv @LIBINTL@ $(OBJECTS_RES_@WOE32@) `if test -n '$(DESTDIR)'; then echo " -Wl,+b -Wl,$(libdir)"; fi` -o iconv$(EXEEXT);; \
	  *) $(LIBTOOL_LINK) $(CC) $(LDFLAGS) $(CFLAGS) $(iconv_LDFLAGS) iconv.@OBJEXT@ ../srclib/libicrt.a ../lib/libiconv.la @LTLIBINTL@ $(OBJECTS_RES_@WOE32@) -o iconv$(EXEEXT);; \
	esac
	$(INSTALL_PROGRAM_ENV) $(LIBTOOL_INSTALL) $(INSTALL_PROGRAM) iconv$(EXEEXT) $(DESTDIR)$(bindir)/iconv$(EXEEXT)

install-strip : force
	case '$(INSTALL_PROGRAM)' in \
	  */install-reloc) \
	    $(MAKE) install prefix='$(prefix)' exec_prefix='$(exec_prefix)' libdir='$(libdir)' RELOCATABLE_STRIP='$(STRIP)' ;; \
	  *) \
	    $(MAKE) install prefix='$(prefix)' exec_prefix='$(exec_prefix)' libdir='$(libdir)' INSTALL_PROGRAM='$(INSTALL_STRIP_PROGRAM)' ;; \
	esac

installdirs : force
	if [ ! -d $(DESTDIR)$(bindir) ] ; then $(mkinstalldirs) $(DESTDIR)$(bindir) ; fi

uninstall : force
	$(LIBTOOL_UNINSTALL) $(RM) $(DESTDIR)$(bindir)/iconv$(EXEEXT)

check : all

mostlyclean : clean

clean : force
	$(RM) *.@OBJEXT@ *.lo iconv.res iconv_no_i18n iconv_no_i18n$(EXEEXT) iconv$(EXEEXT) core *.stackdump
	$(RM) -r .libs _libs

distclean : clean
	$(RM) Makefile

maintainer-clean : distclean

# List of source files.
SOURCE_FILES = \
  Makefile.in \
  iconv.c iconv_no_i18n.c
# List of distributed files imported from other packages.
IMPORTED_FILES =
# List of distributed files generated by autotools or Makefile.devel.
GENERATED_FILES =
# List of distributed files generated by "make".
DISTRIBUTED_BUILT_FILES =
# List of distributed files.
DISTFILES = $(SOURCE_FILES) $(IMPORTED_FILES) $(GENERATED_FILES) $(DISTRIBUTED_BUILT_FILES)

distdir : $(DISTFILES)
	for file in $(DISTFILES); do \
	  if test -f $$file; then dir='.'; else dir='$(srcdir)'; fi; \
	  cp -p "$$dir/$$file" '$(distdir)'/$$file || exit 1; \
	done

force :