Annotation of embedaddon/libnet/doc/Makefile.in, revision 1.1.1.1
1.1 misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6: # Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
18: pkgdatadir = $(datadir)/@PACKAGE@
19: pkgincludedir = $(includedir)/@PACKAGE@
20: pkglibdir = $(libdir)/@PACKAGE@
21: pkglibexecdir = $(libexecdir)/@PACKAGE@
22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23: install_sh_DATA = $(install_sh) -c -m 644
24: install_sh_PROGRAM = $(install_sh) -c
25: install_sh_SCRIPT = $(install_sh) -c
26: INSTALL_HEADER = $(INSTALL_DATA)
27: transform = $(program_transform_name)
28: NORMAL_INSTALL = :
29: PRE_INSTALL = :
30: POST_INSTALL = :
31: NORMAL_UNINSTALL = :
32: PRE_UNINSTALL = :
33: POST_UNINSTALL = :
34: build_triplet = @build@
35: host_triplet = @host@
36: target_triplet = @target@
37: subdir = doc
38: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in COPYING TODO
39: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
40: am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
41: $(top_srcdir)/configure.in
42: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
43: $(ACLOCAL_M4)
44: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
45: CONFIG_HEADER = $(top_builddir)/include/config.h
46: CONFIG_CLEAN_FILES =
47: CONFIG_CLEAN_VPATH_FILES =
48: SOURCES =
49: DIST_SOURCES =
50: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
51: html-recursive info-recursive install-data-recursive \
52: install-dvi-recursive install-exec-recursive \
53: install-html-recursive install-info-recursive \
54: install-pdf-recursive install-ps-recursive install-recursive \
55: installcheck-recursive installdirs-recursive pdf-recursive \
56: ps-recursive uninstall-recursive
57: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
58: distclean-recursive maintainer-clean-recursive
59: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
60: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
61: distdir
62: ETAGS = etags
63: CTAGS = ctags
64: DIST_SUBDIRS = $(SUBDIRS)
65: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
66: am__relativize = \
67: dir0=`pwd`; \
68: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
69: sed_rest='s,^[^/]*/*,,'; \
70: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
71: sed_butlast='s,/*[^/]*$$,,'; \
72: while test -n "$$dir1"; do \
73: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
74: if test "$$first" != "."; then \
75: if test "$$first" = ".."; then \
76: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
77: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
78: else \
79: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
80: if test "$$first2" = "$$first"; then \
81: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
82: else \
83: dir2="../$$dir2"; \
84: fi; \
85: dir0="$$dir0"/"$$first"; \
86: fi; \
87: fi; \
88: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
89: done; \
90: reldir="$$dir2"
91: ACLOCAL = @ACLOCAL@
92: ADDITIONAL_LIBS = @ADDITIONAL_LIBS@
93: AMTAR = @AMTAR@
94: AR = @AR@
95: AUTOCONF = @AUTOCONF@
96: AUTOHEADER = @AUTOHEADER@
97: AUTOMAKE = @AUTOMAKE@
98: AWK = @AWK@
99: CC = @CC@
100: CCDEPMODE = @CCDEPMODE@
101: CFLAGS = @CFLAGS@
102: CPP = @CPP@
103: CPPFLAGS = @CPPFLAGS@
104: CYGPATH_W = @CYGPATH_W@
105: DEFS = @DEFS@
106: DEPDIR = @DEPDIR@
107: DLLTOOL = @DLLTOOL@
108: DSYMUTIL = @DSYMUTIL@
109: DUMPBIN = @DUMPBIN@
110: ECHO_C = @ECHO_C@
111: ECHO_N = @ECHO_N@
112: ECHO_T = @ECHO_T@
113: EGREP = @EGREP@
114: ENDIANESS = @ENDIANESS@
115: EXEEXT = @EXEEXT@
116: FGREP = @FGREP@
117: GREP = @GREP@
118: HAVE_PACKET_SOCKET = @HAVE_PACKET_SOCKET@
119: INSTALL = @INSTALL@
120: INSTALL_DATA = @INSTALL_DATA@
121: INSTALL_PROGRAM = @INSTALL_PROGRAM@
122: INSTALL_SCRIPT = @INSTALL_SCRIPT@
123: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
124: LD = @LD@
125: LDFLAGS = @LDFLAGS@
126: LIBNET_CONFIG_CFLAGS = @LIBNET_CONFIG_CFLAGS@
127: LIBNET_CONFIG_DEFINES = @LIBNET_CONFIG_DEFINES@
128: LIBNET_CONFIG_LIBS = @LIBNET_CONFIG_LIBS@
129: LIBOBJS = @LIBOBJS@
130: LIBS = @LIBS@
131: LIBTOOL = @LIBTOOL@
132: LIPO = @LIPO@
133: LN_S = @LN_S@
134: LTLIBOBJS = @LTLIBOBJS@
135: MAINT = @MAINT@
136: MAKEINFO = @MAKEINFO@
137: MANIFEST_TOOL = @MANIFEST_TOOL@
138: MKDIR_P = @MKDIR_P@
139: NM = @NM@
140: NMEDIT = @NMEDIT@
141: OBJDUMP = @OBJDUMP@
142: OBJEXT = @OBJEXT@
143: OTOOL = @OTOOL@
144: OTOOL64 = @OTOOL64@
145: PACKAGE = @PACKAGE@
146: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
147: PACKAGE_NAME = @PACKAGE_NAME@
148: PACKAGE_STRING = @PACKAGE_STRING@
149: PACKAGE_TARNAME = @PACKAGE_TARNAME@
150: PACKAGE_URL = @PACKAGE_URL@
151: PACKAGE_VERSION = @PACKAGE_VERSION@
152: PATH_SEPARATOR = @PATH_SEPARATOR@
153: RANLIB = @RANLIB@
154: SED = @SED@
155: SET_MAKE = @SET_MAKE@
156: SHELL = @SHELL@
157: STRIP = @STRIP@
158: VERSION = @VERSION@
159: abs_builddir = @abs_builddir@
160: abs_srcdir = @abs_srcdir@
161: abs_top_builddir = @abs_top_builddir@
162: abs_top_srcdir = @abs_top_srcdir@
163: ac_ct_AR = @ac_ct_AR@
164: ac_ct_CC = @ac_ct_CC@
165: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
166: am__include = @am__include@
167: am__leading_dot = @am__leading_dot@
168: am__quote = @am__quote@
169: am__tar = @am__tar@
170: am__untar = @am__untar@
171: bindir = @bindir@
172: build = @build@
173: build_alias = @build_alias@
174: build_cpu = @build_cpu@
175: build_os = @build_os@
176: build_vendor = @build_vendor@
177: builddir = @builddir@
178: datadir = @datadir@
179: datarootdir = @datarootdir@
180: docdir = @docdir@
181: dvidir = @dvidir@
182: exec_prefix = @exec_prefix@
183: host = @host@
184: host_alias = @host_alias@
185: host_cpu = @host_cpu@
186: host_os = @host_os@
187: host_vendor = @host_vendor@
188: htmldir = @htmldir@
189: includedir = @includedir@
190: infodir = @infodir@
191: install_sh = @install_sh@
192: libdir = @libdir@
193: libexecdir = @libexecdir@
194: localedir = @localedir@
195: localstatedir = @localstatedir@
196: mandir = @mandir@
197: mkdir_p = @mkdir_p@
198: oldincludedir = @oldincludedir@
199: pdfdir = @pdfdir@
200: prefix = @prefix@
201: program_transform_name = @program_transform_name@
202: psdir = @psdir@
203: sbindir = @sbindir@
204: sharedstatedir = @sharedstatedir@
205: srcdir = @srcdir@
206: sysconfdir = @sysconfdir@
207: target = @target@
208: target_alias = @target_alias@
209: target_cpu = @target_cpu@
210: target_os = @target_os@
211: target_vendor = @target_vendor@
212: top_build_prefix = @top_build_prefix@
213: top_builddir = @top_builddir@
214: top_srcdir = @top_srcdir@
215: EXTRA_DIST = CHANGELOG CONTRIB COPYING DESIGN_NOTES \
216: libnet.doxygen.conf MIGRATION PACKET_BUILDING PORTED \
217: RAWSOCKET_NON_SEQUITUR TODO
218:
219: SUBDIRS = man html
220: all: all-recursive
221:
222: .SUFFIXES:
223: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
224: @for dep in $?; do \
225: case '$(am__configure_deps)' in \
226: *$$dep*) \
227: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
228: && { if test -f $@; then exit 0; else break; fi; }; \
229: exit 1;; \
230: esac; \
231: done; \
232: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
233: $(am__cd) $(top_srcdir) && \
234: $(AUTOMAKE) --gnu doc/Makefile
235: .PRECIOUS: Makefile
236: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
237: @case '$?' in \
238: *config.status*) \
239: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
240: *) \
241: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
242: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
243: esac;
244:
245: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
246: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
247:
248: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
249: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
250: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
251: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
252: $(am__aclocal_m4_deps):
253:
254: mostlyclean-libtool:
255: -rm -f *.lo
256:
257: clean-libtool:
258: -rm -rf .libs _libs
259:
260: # This directory's subdirectories are mostly independent; you can cd
261: # into them and run `make' without going through this Makefile.
262: # To change the values of `make' variables: instead of editing Makefiles,
263: # (1) if the variable is set in `config.status', edit `config.status'
264: # (which will cause the Makefiles to be regenerated when you run `make');
265: # (2) otherwise, pass the desired values on the `make' command line.
266: $(RECURSIVE_TARGETS):
267: @fail= failcom='exit 1'; \
268: for f in x $$MAKEFLAGS; do \
269: case $$f in \
270: *=* | --[!k]*);; \
271: *k*) failcom='fail=yes';; \
272: esac; \
273: done; \
274: dot_seen=no; \
275: target=`echo $@ | sed s/-recursive//`; \
276: list='$(SUBDIRS)'; for subdir in $$list; do \
277: echo "Making $$target in $$subdir"; \
278: if test "$$subdir" = "."; then \
279: dot_seen=yes; \
280: local_target="$$target-am"; \
281: else \
282: local_target="$$target"; \
283: fi; \
284: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
285: || eval $$failcom; \
286: done; \
287: if test "$$dot_seen" = "no"; then \
288: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
289: fi; test -z "$$fail"
290:
291: $(RECURSIVE_CLEAN_TARGETS):
292: @fail= failcom='exit 1'; \
293: for f in x $$MAKEFLAGS; do \
294: case $$f in \
295: *=* | --[!k]*);; \
296: *k*) failcom='fail=yes';; \
297: esac; \
298: done; \
299: dot_seen=no; \
300: case "$@" in \
301: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
302: *) list='$(SUBDIRS)' ;; \
303: esac; \
304: rev=''; for subdir in $$list; do \
305: if test "$$subdir" = "."; then :; else \
306: rev="$$subdir $$rev"; \
307: fi; \
308: done; \
309: rev="$$rev ."; \
310: target=`echo $@ | sed s/-recursive//`; \
311: for subdir in $$rev; do \
312: echo "Making $$target in $$subdir"; \
313: if test "$$subdir" = "."; then \
314: local_target="$$target-am"; \
315: else \
316: local_target="$$target"; \
317: fi; \
318: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
319: || eval $$failcom; \
320: done && test -z "$$fail"
321: tags-recursive:
322: list='$(SUBDIRS)'; for subdir in $$list; do \
323: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
324: done
325: ctags-recursive:
326: list='$(SUBDIRS)'; for subdir in $$list; do \
327: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
328: done
329:
330: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
331: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
332: unique=`for i in $$list; do \
333: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
334: done | \
335: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
336: END { if (nonempty) { for (i in files) print i; }; }'`; \
337: mkid -fID $$unique
338: tags: TAGS
339:
340: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
341: $(TAGS_FILES) $(LISP)
342: set x; \
343: here=`pwd`; \
344: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
345: include_option=--etags-include; \
346: empty_fix=.; \
347: else \
348: include_option=--include; \
349: empty_fix=; \
350: fi; \
351: list='$(SUBDIRS)'; for subdir in $$list; do \
352: if test "$$subdir" = .; then :; else \
353: test ! -f $$subdir/TAGS || \
354: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
355: fi; \
356: done; \
357: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
358: unique=`for i in $$list; do \
359: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
360: done | \
361: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
362: END { if (nonempty) { for (i in files) print i; }; }'`; \
363: shift; \
364: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
365: test -n "$$unique" || unique=$$empty_fix; \
366: if test $$# -gt 0; then \
367: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
368: "$$@" $$unique; \
369: else \
370: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
371: $$unique; \
372: fi; \
373: fi
374: ctags: CTAGS
375: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
376: $(TAGS_FILES) $(LISP)
377: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
378: unique=`for i in $$list; do \
379: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
380: done | \
381: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
382: END { if (nonempty) { for (i in files) print i; }; }'`; \
383: test -z "$(CTAGS_ARGS)$$unique" \
384: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
385: $$unique
386:
387: GTAGS:
388: here=`$(am__cd) $(top_builddir) && pwd` \
389: && $(am__cd) $(top_srcdir) \
390: && gtags -i $(GTAGS_ARGS) "$$here"
391:
392: distclean-tags:
393: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
394:
395: distdir: $(DISTFILES)
396: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
397: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
398: list='$(DISTFILES)'; \
399: dist_files=`for file in $$list; do echo $$file; done | \
400: sed -e "s|^$$srcdirstrip/||;t" \
401: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
402: case $$dist_files in \
403: */*) $(MKDIR_P) `echo "$$dist_files" | \
404: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
405: sort -u` ;; \
406: esac; \
407: for file in $$dist_files; do \
408: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
409: if test -d $$d/$$file; then \
410: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
411: if test -d "$(distdir)/$$file"; then \
412: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
413: fi; \
414: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
415: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
416: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
417: fi; \
418: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
419: else \
420: test -f "$(distdir)/$$file" \
421: || cp -p $$d/$$file "$(distdir)/$$file" \
422: || exit 1; \
423: fi; \
424: done
425: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
426: if test "$$subdir" = .; then :; else \
427: test -d "$(distdir)/$$subdir" \
428: || $(MKDIR_P) "$(distdir)/$$subdir" \
429: || exit 1; \
430: fi; \
431: done
432: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
433: if test "$$subdir" = .; then :; else \
434: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
435: $(am__relativize); \
436: new_distdir=$$reldir; \
437: dir1=$$subdir; dir2="$(top_distdir)"; \
438: $(am__relativize); \
439: new_top_distdir=$$reldir; \
440: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
441: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
442: ($(am__cd) $$subdir && \
443: $(MAKE) $(AM_MAKEFLAGS) \
444: top_distdir="$$new_top_distdir" \
445: distdir="$$new_distdir" \
446: am__remove_distdir=: \
447: am__skip_length_check=: \
448: am__skip_mode_fix=: \
449: distdir) \
450: || exit 1; \
451: fi; \
452: done
453: check-am: all-am
454: check: check-recursive
455: all-am: Makefile
456: installdirs: installdirs-recursive
457: installdirs-am:
458: install: install-recursive
459: install-exec: install-exec-recursive
460: install-data: install-data-recursive
461: uninstall: uninstall-recursive
462:
463: install-am: all-am
464: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
465:
466: installcheck: installcheck-recursive
467: install-strip:
468: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
469: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
470: `test -z '$(STRIP)' || \
471: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
472: mostlyclean-generic:
473:
474: clean-generic:
475:
476: distclean-generic:
477: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
478: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
479:
480: maintainer-clean-generic:
481: @echo "This command is intended for maintainers to use"
482: @echo "it deletes files that may require special tools to rebuild."
483: clean: clean-recursive
484:
485: clean-am: clean-generic clean-libtool mostlyclean-am
486:
487: distclean: distclean-recursive
488: -rm -f Makefile
489: distclean-am: clean-am distclean-generic distclean-tags
490:
491: dvi: dvi-recursive
492:
493: dvi-am:
494:
495: html: html-recursive
496:
497: html-am:
498:
499: info: info-recursive
500:
501: info-am:
502:
503: install-data-am:
504:
505: install-dvi: install-dvi-recursive
506:
507: install-dvi-am:
508:
509: install-exec-am:
510:
511: install-html: install-html-recursive
512:
513: install-html-am:
514:
515: install-info: install-info-recursive
516:
517: install-info-am:
518:
519: install-man:
520:
521: install-pdf: install-pdf-recursive
522:
523: install-pdf-am:
524:
525: install-ps: install-ps-recursive
526:
527: install-ps-am:
528:
529: installcheck-am:
530:
531: maintainer-clean: maintainer-clean-recursive
532: -rm -f Makefile
533: maintainer-clean-am: distclean-am maintainer-clean-generic
534:
535: mostlyclean: mostlyclean-recursive
536:
537: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
538:
539: pdf: pdf-recursive
540:
541: pdf-am:
542:
543: ps: ps-recursive
544:
545: ps-am:
546:
547: uninstall-am:
548:
549: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
550: install-am install-strip tags-recursive
551:
552: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
553: all all-am check check-am clean clean-generic clean-libtool \
554: ctags ctags-recursive distclean distclean-generic \
555: distclean-libtool distclean-tags distdir dvi dvi-am html \
556: html-am info info-am install install-am install-data \
557: install-data-am install-dvi install-dvi-am install-exec \
558: install-exec-am install-html install-html-am install-info \
559: install-info-am install-man install-pdf install-pdf-am \
560: install-ps install-ps-am install-strip installcheck \
561: installcheck-am installdirs installdirs-am maintainer-clean \
562: maintainer-clean-generic mostlyclean mostlyclean-generic \
563: mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
564: uninstall uninstall-am
565:
566:
567: doc:
568: cd $(top_srcdir) && doxygen doc/libnet.doxygen.conf
569:
570: # Tell versions [3.59,3.63) of GNU make to not export all variables.
571: # Otherwise a system limit (for SysV at least) may be exceeded.
572: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / libnet / doc