embedaddon/libnet/doc/libnet.doxygen.conf - diff

Return to libnet.doxygen.conf CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / libnet / doc

Diff for /embedaddon/libnet/doc/libnet.doxygen.conf between versions 1.1.1.1 and 1.1.1.2

version 1.1.1.1, 2012/02/21 22:14:23	version 1.1.1.2, 2013/07/22 11:54:41
Line 1	Line 1
# Doxyfile 1.3.2	# Doxyfile 1.7.4
# $Id$

# This file describes the settings to be used by the documentation system	# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project	# doxygen (www.doxygen.org) for a project.
#	#
# All text after a hash (#) is considered a comment and will be ignored	# All text after a hash (#) is considered a comment and will be ignored.
# The format is:	# The format is:
# TAG = value [value, ...]	# TAG = value [value, ...]
# For lists items can also be appended using:	# For lists items can also be appended using:
# TAG += value [value, ...]	# TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (" ")	# Values that contain spaces should be placed between quotes (" ").

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# General configuration options	# Project related configuration options
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# The PROJECT_NAME tag is a single word (or a sequence of words surrounded	# This tag specifies the encoding used for all characters in the config file
	# that follow. The default is UTF-8 which is also the encoding used for all
	# text before the first occurrence of this tag. Doxygen uses libiconv (or the
	# iconv built into libc) for the transcoding. See
	# http://www.gnu.org/software/libiconv for the list of possible encodings.

	DOXYFILE_ENCODING = UTF-8

	# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project.	# by quotes) that should identify the project.

PROJECT_NAME = "libnet"	PROJECT_NAME = "libnet"

# The PROJECT_NUMBER tag can be used to enter a project or revision number.	# The PROJECT_NUMBER tag can be used to enter a project or revision number.
# This could be handy for archiving the generated documentation or	# This could be handy for archiving the generated documentation or
# if some version control system is used.	# if some version control system is used.

PROJECT_NUMBER = "1.1.1"	PROJECT_NUMBER = "1.1"

# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)	# Using the PROJECT_BRIEF tag one can provide an optional one line description
# base path where the generated documentation will be put.	# for a project that appears at the top of each page and should give viewer
# If a relative path is entered, it will be relative to the location	# a quick idea about the purpose of the project. Keep the description short.

	PROJECT_BRIEF =

	# With the PROJECT_LOGO tag one can specify an logo or icon that is
	# included in the documentation. The maximum height of the logo should not
	# exceed 55 pixels and the maximum width should not exceed 200 pixels.
	# Doxygen will copy the logo to the output directory.

	PROJECT_LOGO =

	# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
	# base path where the generated documentation will be put.
	# If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used.	# where doxygen was started. If left blank the current directory will be used.

OUTPUT_DIRECTORY = "doc"	OUTPUT_DIRECTORY = "doc"

# The OUTPUT_LANGUAGE tag is used to specify the language in which all	# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
# documentation generated by doxygen is written. Doxygen will use this	# 4096 sub-directories (in 2 levels) under the output directory of each output
# information to generate all constant output in the proper language.	# format and will distribute the generated files over these directories.
# The default language is English, other supported languages are:	# Enabling this option can be useful when feeding doxygen a huge amount of
# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch,	# source files, where putting all generated files in the same directory would
# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en	# otherwise cause performance problems for the file system.
# (Japanese with English messages), Korean, Norwegian, Polish, Portuguese,
# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.

	CREATE_SUBDIRS = NO

	# The OUTPUT_LANGUAGE tag is used to specify the language in which all
	# documentation generated by doxygen is written. Doxygen will use this
	# information to generate all constant output in the proper language.
	# The default language is English, other supported languages are:
	# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
	# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
	# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
	# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
	# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
	# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.

OUTPUT_LANGUAGE = English	OUTPUT_LANGUAGE = English

# This tag can be used to specify the encoding used in the generated output.	# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
# The encoding is not always determined by the language that is chosen,	# include brief member descriptions after the members that are listed in
# but also whether or not the output is meant for Windows or non-Windows users.	# the file and class documentation (similar to JavaDoc).
# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES	# Set to NO to disable this.
# forces the Windows encoding (this is the default for the Windows binary),
# whereas setting the tag to NO uses a Unix-style encoding (the default for
# all platforms other than Windows).

USE_WINDOWS_ENCODING = NO	BRIEF_MEMBER_DESC = YES

# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in	# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
# documentation are documented, even if no documentation was available.	# the brief description of a member or function before the detailed description.
# Private class members and static file members will be hidden unless	# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
	# brief descriptions will be completely suppressed.

	REPEAT_BRIEF = YES

	# This tag implements a quasi-intelligent brief description abbreviator
	# that is used to form the text in various listings. Each string
	# in this list, if found as the leading text of the brief description, will be
	# stripped from the text and the result after processing the whole list, is
	# used as the annotated text. Otherwise, the brief description is used as-is.
	# If left blank, the following values are used ("$name" is automatically
	# replaced with the name of the entity): "The $name class" "The $name widget"
	# "The $name file" "is" "provides" "specifies" "contains"
	# "represents" "a" "an" "the"

	ABBREVIATE_BRIEF =

	# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
	# Doxygen will generate a detailed section even if there is only a brief
	# description.

	ALWAYS_DETAILED_SEC = NO

	# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
	# inherited members of a class in the documentation of that class as if those
	# members were ordinary class members. Constructors, destructors and assignment
	# operators of the base classes will not be shown.

	INLINE_INHERITED_MEMB = NO

	# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
	# path before files name in the file list and in the header files. If set
	# to NO the shortest path that makes the file name unique will be used.

	FULL_PATH_NAMES = NO

	# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
	# can be used to strip a user-defined part of the path. Stripping is
	# only done if one of the specified strings matches the left-hand part of
	# the path. The tag can be used to show relative paths in the file list.
	# If left blank the directory from which doxygen is run is used as the
	# path to strip.

	STRIP_FROM_PATH =

	# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
	# the path mentioned in the documentation of a class, which tells
	# the reader which header file to include in order to use a class.
	# If left blank only the name of the header file containing the class
	# definition is used. Otherwise one should specify the include paths that
	# are normally passed to the compiler using the -I flag.

	STRIP_FROM_INC_PATH =

	# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
	# (but less readable) file names. This can be useful if your file system
	# doesn't support long names like on DOS, Mac, or CD-ROM.

	SHORT_NAMES = NO

	# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
	# will interpret the first line (until the first dot) of a JavaDoc-style
	# comment as the brief description. If set to NO, the JavaDoc
	# comments will behave just like regular Qt-style comments
	# (thus requiring an explicit @brief command for a brief description.)

	JAVADOC_AUTOBRIEF = NO

	# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
	# interpret the first line (until the first dot) of a Qt-style
	# comment as the brief description. If set to NO, the comments
	# will behave just like regular Qt-style comments (thus requiring
	# an explicit \brief command for a brief description.)

	QT_AUTOBRIEF = NO

	# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
	# treat a multi-line C++ special comment block (i.e. a block of //! or ///
	# comments) as a brief description. This used to be the default behaviour.
	# The new default is to treat a multi-line C++ comment block as a detailed
	# description. Set this tag to YES if you prefer the old behaviour instead.

	MULTILINE_CPP_IS_BRIEF = NO

	# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
	# member inherits the documentation from any documented member that it
	# re-implements.

	INHERIT_DOCS = YES

	# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
	# a new page for each member. If set to NO, the documentation of a member will
	# be part of the file/class/namespace that contains it.

	SEPARATE_MEMBER_PAGES = NO

	# The TAB_SIZE tag can be used to set the number of spaces in a tab.
	# Doxygen uses this value to replace tabs by spaces in code fragments.

	TAB_SIZE = 4

	# This tag can be used to specify a number of aliases that acts
	# as commands in the documentation. An alias has the form "name=value".
	# For example adding "sideeffect=\par Side Effects:\n" will allow you to
	# put the command \sideeffect (or @sideeffect) in the documentation, which
	# will result in a user-defined paragraph with heading "Side Effects:".
	# You can put \n's in the value part of an alias to insert newlines.

	ALIASES =

	# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
	# sources only. Doxygen will then generate output that is more tailored for C.
	# For instance, some of the names that are used will be different. The list
	# of all members will be omitted, etc.

	OPTIMIZE_OUTPUT_FOR_C = YES

	# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
	# sources only. Doxygen will then generate output that is more tailored for
	# Java. For instance, namespaces will be presented as packages, qualified
	# scopes will look different, etc.

	OPTIMIZE_OUTPUT_JAVA = NO

	# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
	# sources only. Doxygen will then generate output that is more tailored for
	# Fortran.

	OPTIMIZE_FOR_FORTRAN = NO

	# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
	# sources. Doxygen will then generate output that is tailored for
	# VHDL.

	OPTIMIZE_OUTPUT_VHDL = NO

	# Doxygen selects the parser to use depending on the extension of the files it
	# parses. With this tag you can assign which parser to use for a given extension.
	# Doxygen has a built-in mapping, but you can override or extend it using this
	# tag. The format is ext=language, where ext is a file extension, and language
	# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
	# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
	# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
	# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
	# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

	EXTENSION_MAPPING =

	# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
	# to include (a tag file for) the STL sources as input, then you should
	# set this tag to YES in order to let doxygen match functions declarations and
	# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
	# func(std::string) {}). This also makes the inheritance and collaboration
	# diagrams that involve STL classes more complete and accurate.

	BUILTIN_STL_SUPPORT = NO

	# If you use Microsoft's C++/CLI language, you should set this option to YES to
	# enable parsing support.

	CPP_CLI_SUPPORT = NO

	# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
	# Doxygen will parse them like normal C++ but will assume all classes use public
	# instead of private inheritance when no explicit protection keyword is present.

	SIP_SUPPORT = NO

	# For Microsoft's IDL there are propget and propput attributes to indicate getter
	# and setter methods for a property. Setting this option to YES (the default)
	# will make doxygen replace the get and set methods by a property in the
	# documentation. This will only work if the methods are indeed getting or
	# setting a simple type. If this is not the case, or you want to show the
	# methods anyway, you should set this option to NO.

	IDL_PROPERTY_SUPPORT = YES

	# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
	# tag is set to YES, then doxygen will reuse the documentation of the first
	# member in the group (if any) for the other members of the group. By default
	# all members of a group must be documented explicitly.

	DISTRIBUTE_GROUP_DOC = NO

	# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
	# the same type (for instance a group of public functions) to be put as a
	# subgroup of that type (e.g. under the Public Functions section). Set it to
	# NO to prevent subgrouping. Alternatively, this can be done per class using
	# the \nosubgrouping command.

	SUBGROUPING = YES

	# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
	# unions are shown inside the group in which they are included (e.g. using
	# @ingroup) instead of on a separate page (for HTML and Man pages) or
	# section (for LaTeX and RTF).

	INLINE_GROUPED_CLASSES = NO

	# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
	# is documented as struct, union, or enum with the name of the typedef. So
	# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
	# with name TypeT. When disabled the typedef will appear as a member of a file,
	# namespace, or class. And the struct will be named TypeS. This can typically
	# be useful for C code in case the coding convention dictates that all compound
	# types are typedef'ed and only the typedef is referenced, never the tag name.

	TYPEDEF_HIDES_STRUCT = NO

	# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
	# determine which symbols to keep in memory and which to flush to disk.
	# When the cache is full, less often used symbols will be written to disk.
	# For small to medium size projects (<1000 input files) the default value is
	# probably good enough. For larger projects a too small cache size can cause
	# doxygen to be busy swapping symbols to and from disk most of the time
	# causing a significant performance penalty.
	# If the system has enough physical memory increasing the cache will improve the
	# performance by keeping more symbols in memory. Note that the value works on
	# a logarithmic scale so increasing the size by one will roughly double the
	# memory usage. The cache size is given by this formula:
	# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
	# corresponding to a cache size of 2^16 = 65536 symbols

	SYMBOL_CACHE_SIZE = 0

	#---------------------------------------------------------------------------
	# Build related configuration options
	#---------------------------------------------------------------------------

	# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
	# documentation are documented, even if no documentation was available.
	# Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES	# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

EXTRACT_ALL = NO	EXTRACT_ALL = NO

# If the EXTRACT_PRIVATE tag is set to YES all private members of a class	# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation.	# will be included in the documentation.

EXTRACT_PRIVATE = NO	EXTRACT_PRIVATE = NO

# If the EXTRACT_STATIC tag is set to YES all static members of a file	# If the EXTRACT_STATIC tag is set to YES all static members of a file
# will be included in the documentation.	# will be included in the documentation.

EXTRACT_STATIC = NO	EXTRACT_STATIC = NO

# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)	# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
# defined locally in source files will be included in the documentation.	# defined locally in source files will be included in the documentation.
# If set to NO only classes defined in header files are included.	# If set to NO only classes defined in header files are included.

EXTRACT_LOCAL_CLASSES = YES	EXTRACT_LOCAL_CLASSES = NO

# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all	# This flag is only useful for Objective-C code. When set to YES local
# undocumented members of documented classes, files or namespaces.	# methods, which are defined in the implementation section but not in
# If set to NO (the default) these members will be included in the	# the interface are included in the documentation.
# various overviews, but no documentation section is generated.	# If set to NO (the default) only methods in the interface are included.

	EXTRACT_LOCAL_METHODS = NO

	# If this flag is set to YES, the members of anonymous namespaces will be
	# extracted and appear in the documentation as a namespace called
	# 'anonymous_namespace{file}', where file will be replaced with the base
	# name of the file that contains the anonymous namespace. By default
	# anonymous namespaces are hidden.

	EXTRACT_ANON_NSPACES = NO

	# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
	# undocumented members of documented classes, files or namespaces.
	# If set to NO (the default) these members will be included in the
	# various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled.	# This option has no effect if EXTRACT_ALL is enabled.

HIDE_UNDOC_MEMBERS = NO	HIDE_UNDOC_MEMBERS = NO

# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all	# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy.	# undocumented classes that are normally visible in the class hierarchy.
# If set to NO (the default) these classes will be included in the various	# If set to NO (the default) these classes will be included in the various
# overviews. This option has no effect if EXTRACT_ALL is enabled.	# overviews. This option has no effect if EXTRACT_ALL is enabled.

HIDE_UNDOC_CLASSES = NO	HIDE_UNDOC_CLASSES = YES

# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all	# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
# friend (class\|struct\|union) declarations.	# friend (class\|struct\|union) declarations.
# If set to NO (the default) these declarations will be included in the	# If set to NO (the default) these declarations will be included in the
# documentation.	# documentation.

HIDE_FRIEND_COMPOUNDS = NO	HIDE_FRIEND_COMPOUNDS = NO

# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any	# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
# documentation blocks found inside the body of a function.	# documentation blocks found inside the body of a function.
# If set to NO (the default) these blocks will be appended to the	# If set to NO (the default) these blocks will be appended to the
# function's detailed documentation block.	# function's detailed documentation block.

HIDE_IN_BODY_DOCS = NO	HIDE_IN_BODY_DOCS = NO

# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will	# The INTERNAL_DOCS tag determines if documentation
# include brief member descriptions after the members that are listed in	# that is typed after a \internal command is included. If the tag is set
# the file and class documentation (similar to JavaDoc).	# to NO (the default) then the documentation will be excluded.
# Set to NO to disable this.

BRIEF_MEMBER_DESC = YES

# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
# the brief description of a member or function before the detailed description.
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed.

REPEAT_BRIEF = YES

# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
# Doxygen will generate a detailed section even if there is only a brief
# description.

ALWAYS_DETAILED_SEC = NO

# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
# members of a class in the documentation of that class as if those members were
# ordinary class members. Constructors, destructors and assignment operators of
# the base classes will not be shown.

INLINE_INHERITED_MEMB = NO

# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
# path before files name in the file list and in the header files. If set
# to NO the shortest path that makes the file name unique will be used.

FULL_PATH_NAMES = NO

# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
# can be used to strip a user-defined part of the path. Stripping is
# only done if one of the specified strings matches the left-hand part of
# the path. It is allowed to use relative paths in the argument list.

STRIP_FROM_PATH =

# The INTERNAL_DOCS tag determines if documentation
# that is typed after a \internal command is included. If the tag is set
# to NO (the default) then the documentation will be excluded.
# Set it to YES to include the internal documentation.	# Set it to YES to include the internal documentation.

INTERNAL_DOCS = NO	INTERNAL_DOCS = NO

# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate	# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
# file names in lower-case letters. If set to YES upper-case letters are also	# file names in lower-case letters. If set to YES upper-case letters are also
# allowed. This is useful if you have classes or files whose names only differ	# allowed. This is useful if you have classes or files whose names only differ
# in case and if your file system supports case sensitive file names. Windows	# in case and if your file system supports case sensitive file names. Windows
# users are advised to set this option to NO.	# and Mac users are advised to set this option to NO.

CASE_SENSE_NAMES = YES	CASE_SENSE_NAMES = YES

# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter	# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
# (but less readable) file names. This can be useful is your file systems	# will show members with their full class and namespace scopes in the
# doesn't support long names like on DOS, Mac, or CD-ROM.

SHORT_NAMES = NO

# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
# will show members with their full class and namespace scopes in the
# documentation. If set to YES the scope will be hidden.	# documentation. If set to YES the scope will be hidden.

HIDE_SCOPE_NAMES = NO	HIDE_SCOPE_NAMES = NO

# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen	# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
# will put a list of the files that are included by a file in the documentation	# will put a list of the files that are included by a file in the documentation
# of that file.	# of that file.

SHOW_INCLUDE_FILES = YES	SHOW_INCLUDE_FILES = YES

# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen	# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
# will interpret the first line (until the first dot) of a JavaDoc-style	# will list include files with double quotes in the documentation
# comment as the brief description. If set to NO, the JavaDoc	# rather than with sharp brackets.
# comments will behave just like the Qt-style comments (thus requiring an
# explict @brief command for a brief description.

JAVADOC_AUTOBRIEF = NO	FORCE_LOCAL_INCLUDES = NO

# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen	# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
# treat a multi-line C++ special comment block (i.e. a block of //! or ///	# is inserted in the documentation for inline members.
# comments) as a brief description. This used to be the default behaviour.
# The new default is to treat a multi-line C++ comment block as a detailed
# description. Set this tag to YES if you prefer the old behaviour instead.

MULTILINE_CPP_IS_BRIEF = NO	INLINE_INFO = YES

# If the DETAILS_AT_TOP tag is set to YES then Doxygen	# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
# will output the detailed description near the top, like JavaDoc.	# will sort the (detailed) documentation of file and class members
# If set to NO, the detailed description appears after the member	# alphabetically by member name. If set to NO the members will appear in
# documentation.	# declaration order.

DETAILS_AT_TOP = NO	SORT_MEMBER_DOCS = YES

# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented	# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
# member inherits the documentation from any documented member that it	# brief documentation of file, namespace and class members alphabetically
# reimplements.	# by member name. If set to NO (the default) the members will appear in
	# declaration order.

INHERIT_DOCS = YES	SORT_BRIEF_DOCS = NO

# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]	# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
# is inserted in the documentation for inline members.	# will sort the (brief and detailed) documentation of class members so that
	# constructors and destructors are listed first. If set to NO (the default)
	# the constructors will appear in the respective orders defined by
	# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
	# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
	# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.

INLINE_INFO = YES	SORT_MEMBERS_CTORS_1ST = NO

# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen	# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
# will sort the (detailed) documentation of file and class members	# hierarchy of group names into alphabetical order. If set to NO (the default)
# alphabetically by member name. If set to NO the members will appear in	# the group names will appear in their defined order.
# declaration order.

SORT_MEMBER_DOCS = YES	SORT_GROUP_NAMES = NO

# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC	# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
# tag is set to YES, then doxygen will reuse the documentation of the first	# sorted by fully-qualified names, including namespaces. If set to
# member in the group (if any) for the other members of the group. By default	# NO (the default), the class list will be sorted only by class name,
# all members of a group must be documented explicitly.	# not including the namespace part.
	# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
	# Note: This option applies only to the class list, not to the
	# alphabetical list.

DISTRIBUTE_GROUP_DOC = NO	SORT_BY_SCOPE_NAME = NO

# The TAB_SIZE tag can be used to set the number of spaces in a tab.	# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
# Doxygen uses this value to replace tabs by spaces in code fragments.	# do proper type resolution of all parameters of a function it will reject a
	# match between the prototype and the implementation of a member function even
	# if there is only one candidate or it is obvious which candidate to choose
	# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
	# will still accept a match between prototype and implementation in such cases.

TAB_SIZE = 4	STRICT_PROTO_MATCHING = NO

# The GENERATE_TODOLIST tag can be used to enable (YES) or	# The GENERATE_TODOLIST tag can be used to enable (YES) or
# disable (NO) the todo list. This list is created by putting \todo	# disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation.	# commands in the documentation.

GENERATE_TODOLIST = YES	GENERATE_TODOLIST = YES

# The GENERATE_TESTLIST tag can be used to enable (YES) or	# The GENERATE_TESTLIST tag can be used to enable (YES) or
# disable (NO) the test list. This list is created by putting \test	# disable (NO) the test list. This list is created by putting \test
# commands in the documentation.	# commands in the documentation.

GENERATE_TESTLIST = YES	GENERATE_TESTLIST = YES

# The GENERATE_BUGLIST tag can be used to enable (YES) or	# The GENERATE_BUGLIST tag can be used to enable (YES) or
# disable (NO) the bug list. This list is created by putting \bug	# disable (NO) the bug list. This list is created by putting \bug
# commands in the documentation.	# commands in the documentation.

GENERATE_BUGLIST = YES	GENERATE_BUGLIST = YES

# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or	# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
# disable (NO) the deprecated list. This list is created by putting	# disable (NO) the deprecated list. This list is created by putting
# \deprecated commands in the documentation.	# \deprecated commands in the documentation.

GENERATE_DEPRECATEDLIST= YES	GENERATE_DEPRECATEDLIST= YES

# This tag can be used to specify a number of aliases that acts	# The ENABLED_SECTIONS tag can be used to enable conditional
# as commands in the documentation. An alias has the form "name=value".
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
# put the command \sideeffect (or @sideeffect) in the documentation, which
# will result in a user-defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines.

ALIASES =

# The ENABLED_SECTIONS tag can be used to enable conditional
# documentation sections, marked by \if sectionname ... \endif.	# documentation sections, marked by \if sectionname ... \endif.

ENABLED_SECTIONS =	ENABLED_SECTIONS =

# The MAX_INITIALIZER_LINES tag determines the maximum number of lines	# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
# the initial value of a variable or define consists of for it to appear in	# the initial value of a variable or macro consists of for it to appear in
# the documentation. If the initializer consists of more lines than specified	# the documentation. If the initializer consists of more lines than specified
# here it will be hidden. Use a value of 0 to hide initializers completely.	# here it will be hidden. Use a value of 0 to hide initializers completely.
# The appearance of the initializer of individual variables and defines in the	# The appearance of the initializer of individual variables and macros in the
# documentation can be controlled using \showinitializer or \hideinitializer	# documentation can be controlled using \showinitializer or \hideinitializer
# command in the documentation regardless of this setting.	# command in the documentation regardless of this setting.

MAX_INITIALIZER_LINES = 30	MAX_INITIALIZER_LINES = 30

# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources	# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
# only. Doxygen will then generate output that is more tailored for C.	# at the bottom of the documentation of classes and structs. If set to YES the
# For instance, some of the names that are used will be different. The list	# list will mention the files that were used to generate the documentation.
# of all members will be omitted, etc.

OPTIMIZE_OUTPUT_FOR_C = YES	SHOW_USED_FILES = YES

# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources	# If the sources in your project are distributed over multiple directories
# only. Doxygen will then generate output that is more tailored for Java.	# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
# For instance, namespaces will be presented as packages, qualified scopes	# in the documentation. The default is NO.
# will look different, etc.

OPTIMIZE_OUTPUT_JAVA = NO	SHOW_DIRECTORIES = NO

# Set the SHOW_USED_FILES tag to NO to disable the list of files generated	# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# at the bottom of the documentation of classes and structs. If set to YES the	# This will remove the Files entry from the Quick Index and from the
# list will mention the files that were used to generate the documentation.	# Folder Tree View (if specified). The default is YES.

SHOW_USED_FILES = YES	SHOW_FILES = YES

	# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
	# Namespaces page.
	# This will remove the Namespaces entry from the Quick Index
	# and from the Folder Tree View (if specified). The default is YES.

	SHOW_NAMESPACES = YES

	# The FILE_VERSION_FILTER tag can be used to specify a program or script that
	# doxygen should invoke to get the current version for each file (typically from
	# the version control system). Doxygen will invoke the program by executing (via
	# popen()) the command <command> <input-file>, where <command> is the value of
	# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
	# provided by doxygen. Whatever the program writes to standard output
	# is used as the file version. See the manual for examples.

	FILE_VERSION_FILTER =

	# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
	# by doxygen. The layout file controls the global structure of the generated
	# output files in an output format independent way. The create the layout file
	# that represents doxygen's defaults, run doxygen with the -l option.
	# You can optionally specify a file name after the option, if omitted
	# DoxygenLayout.xml will be used as the name of the layout file.

	LAYOUT_FILE =

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# configuration options related to warning and progress messages	# configuration options related to warning and progress messages
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# The QUIET tag can be used to turn on/off the messages that are generated	# The QUIET tag can be used to turn on/off the messages that are generated
# by doxygen. Possible values are YES and NO. If left blank NO is used.	# by doxygen. Possible values are YES and NO. If left blank NO is used.

QUIET = NO	QUIET = YES

# The WARNINGS tag can be used to turn on/off the warning messages that are	# The WARNINGS tag can be used to turn on/off the warning messages that are
# generated by doxygen. Possible values are YES and NO. If left blank	# generated by doxygen. Possible values are YES and NO. If left blank
# NO is used.	# NO is used.

WARNINGS = YES	WARNINGS = YES

# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings	# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will	# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
# automatically be disabled.	# automatically be disabled.

WARN_IF_UNDOCUMENTED = YES	WARN_IF_UNDOCUMENTED = NO

# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for	# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some	# potential errors in the documentation, such as not documenting some
# parameters in a documented function, or documenting parameters that	# parameters in a documented function, or documenting parameters that
# don't exist or using markup commands wrongly.	# don't exist or using markup commands wrongly.

WARN_IF_DOC_ERROR = YES	WARN_IF_DOC_ERROR = YES

# The WARN_FORMAT tag determines the format of the warning messages that	# The WARN_NO_PARAMDOC option can be enabled to get warnings for
# doxygen can produce. The string should contain the $file, $line, and $text	# functions that are documented, but have no documentation for their parameters
# tags, which will be replaced by the file and line number from which the	# or return value. If set to NO (the default) doxygen will only warn about
# warning originated and the warning text.	# wrong or incomplete parameter documentation, but not about the absence of
	# documentation.

WARN_FORMAT = "$file:$line: $text"	WARN_NO_PARAMDOC = YES

# The WARN_LOGFILE tag can be used to specify a file to which warning	# The WARN_FORMAT tag determines the format of the warning messages that
# and error messages should be written. If left blank the output is written	# doxygen can produce. The string should contain the $file, $line, and $text
	# tags, which will be replaced by the file and line number from which the
	# warning originated and the warning text. Optionally the format may contain
	# $version, which will be replaced by the version of the file (if it could
	# be obtained via FILE_VERSION_FILTER)

	WARN_FORMAT = "$file:$line: $text "

	# The WARN_LOGFILE tag can be used to specify a file to which warning
	# and error messages should be written. If left blank the output is written
# to stderr.	# to stderr.

WARN_LOGFILE =	WARN_LOGFILE =

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# configuration options related to the input files	# configuration options related to the input files
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# The INPUT tag can be used to specify the files and/or directories that contain	# The INPUT tag can be used to specify the files and/or directories that contain
# documented source files. You may enter file names like "myfile.cpp" or	# documented source files. You may enter file names like "myfile.cpp" or
# directories like "/usr/src/myproject". Separate the files or directories	# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.	# with spaces.

INPUT =	INPUT = include/libnet \
	include/libnet.h

# If the value of the INPUT tag contains directories, you can use the	# This tag can be used to specify the character encoding of the source files
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp	# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
# and *.h) to filter out the source-files in the directories. If left	# also the default input encoding. Doxygen uses libiconv (or the iconv built
# blank the following patterns are tested:	# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
# .c .cc .cxx .cpp .c++ .java .ii .ixx .ipp .i++ .inl .h .hh .hxx *.hpp	# the list of possible encodings.
# .h++ .idl .odl .cs

FILE_PATTERNS =	INPUT_ENCODING = UTF-8

# The RECURSIVE tag can be used to turn specify whether or not subdirectories	# If the value of the INPUT tag contains directories, you can use the
# should be searched for input files as well. Possible values are YES and NO.	# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
	# and *.h) to filter out the source-files in the directories. If left
	# blank the following patterns are tested:
	# .c .cc .cxx .cpp .c++ .d .java .ii .ixx .ipp .i++ .inl .h .hh
	# .hxx .hpp .h++ .idl .odl .cs .php .php3 .inc .m .mm .dox *.py
	# .f90 .f .for .vhd *.vhdl

	FILE_PATTERNS = *.h

	# The RECURSIVE tag can be used to turn specify whether or not subdirectories
	# should be searched for input files as well. Possible values are YES and NO.
# If left blank NO is used.	# If left blank NO is used.

RECURSIVE = YES	RECURSIVE = YES

# The EXCLUDE tag can be used to specify files and/or directories that should	# The EXCLUDE tag can be used to specify files and/or directories that should
# excluded from the INPUT source files. This way you can easily exclude a	# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.	# subdirectory from a directory tree whose root is specified with the INPUT tag.

EXCLUDE =	EXCLUDE = include/libnet/libnet-headers.h

# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories	# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
# that are symbolic links (a Unix filesystem feature) are excluded from the input.	# directories that are symbolic links (a Unix file system feature) are excluded
	# from the input.

EXCLUDE_SYMLINKS = NO	EXCLUDE_SYMLINKS = NO

# If the value of the INPUT tag contains directories, you can use the	# If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude	# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# certain files from those directories.	# certain files from those directories. Note that the wildcards are matched
	# against the file with absolute path, so to exclude all test directories
	# for example use the pattern /test/

EXCLUDE_PATTERNS = /sample/	EXCLUDE_PATTERNS = /sample/

# The EXAMPLE_PATH tag can be used to specify one or more files or	# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# directories that contain example code fragments that are included (see	# (namespaces, classes, functions, etc.) that should be excluded from the
	# output. The symbol name can be a fully qualified name, a word, or if the
	# wildcard * is used, a substring. Examples: ANamespace, AClass,
	# AClass::ANamespace, ANamespace::*Test

	EXCLUDE_SYMBOLS =

	# The EXAMPLE_PATH tag can be used to specify one or more files or
	# directories that contain example code fragments that are included (see
# the \include command).	# the \include command).

EXAMPLE_PATH =	EXAMPLE_PATH =

# If the value of the EXAMPLE_PATH tag contains directories, you can use the	# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp	# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left	# and *.h) to filter out the source-files in the directories. If left
# blank all files are included.	# blank all files are included.

EXAMPLE_PATTERNS =	EXAMPLE_PATTERNS =

# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be	# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude	# searched for input files to be used with the \include or \dontinclude
# commands irrespective of the value of the RECURSIVE tag.	# commands irrespective of the value of the RECURSIVE tag.
# Possible values are YES and NO. If left blank NO is used.	# Possible values are YES and NO. If left blank NO is used.

EXAMPLE_RECURSIVE = NO	EXAMPLE_RECURSIVE = NO

# The IMAGE_PATH tag can be used to specify one or more files or	# The IMAGE_PATH tag can be used to specify one or more files or
# directories that contain image that are included in the documentation (see	# directories that contain image that are included in the documentation (see
# the \image command).	# the \image command).

IMAGE_PATH =	IMAGE_PATH =

# The INPUT_FILTER tag can be used to specify a program that doxygen should	# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program	# invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command <filter> <input-file>, where <filter>	# by executing (via popen()) the command <filter> <input-file>, where <filter>
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an	# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
# input file. Doxygen will then use the output that the filter program writes	# input file. Doxygen will then use the output that the filter program writes
# to standard output.	# to standard output.
	# If FILTER_PATTERNS is specified, this tag will be
	# ignored.

INPUT_FILTER =	INPUT_FILTER =

# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using	# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# INPUT_FILTER) will be used to filter the input files when producing source	# basis.
	# Doxygen will compare the file name with each pattern and apply the
	# filter if there is a match.
	# The filters are a list of the form:
	# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
	# info on how filters are used. If FILTER_PATTERNS is empty or if
	# non of the patterns match the file name, INPUT_FILTER is applied.

	FILTER_PATTERNS =

	# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
	# INPUT_FILTER) will be used to filter the input files when producing source
# files to browse (i.e. when SOURCE_BROWSER is set to YES).	# files to browse (i.e. when SOURCE_BROWSER is set to YES).

FILTER_SOURCE_FILES = NO	FILTER_SOURCE_FILES = NO

	# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
	# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
	# and it is also possible to disable source filtering for a specific pattern
	# using *.ext= (so without naming a filter). This option only has effect when
	# FILTER_SOURCE_FILES is enabled.

	FILTER_SOURCE_PATTERNS =

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# configuration options related to source browsing	# configuration options related to source browsing
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the SOURCE_BROWSER tag is set to YES then a list of source files will	# If the SOURCE_BROWSER tag is set to YES then a list of source files will
# be generated. Documented entities will be cross-referenced with these sources.	# be generated. Documented entities will be cross-referenced with these sources.
	# Note: To get rid of all source code in the generated output, make sure also
	# VERBATIM_HEADERS is set to NO.

SOURCE_BROWSER = NO	SOURCE_BROWSER = NO

# Setting the INLINE_SOURCES tag to YES will include the body	# Setting the INLINE_SOURCES tag to YES will include the body
# of functions and classes directly in the documentation.	# of functions and classes directly in the documentation.

INLINE_SOURCES = NO	INLINE_SOURCES = NO

# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct	# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
# doxygen to hide any special comment blocks from generated source code	# doxygen to hide any special comment blocks from generated source code
# fragments. Normal C and C++ comments will always remain visible.	# fragments. Normal C and C++ comments will always remain visible.

STRIP_CODE_COMMENTS = YES	STRIP_CODE_COMMENTS = YES

# If the REFERENCED_BY_RELATION tag is set to YES (the default)	# If the REFERENCED_BY_RELATION tag is set to YES
# then for each documented function all documented	# then for each documented function all documented
# functions referencing it will be listed.	# functions referencing it will be listed.

REFERENCED_BY_RELATION = YES	REFERENCED_BY_RELATION = YES

# If the REFERENCES_RELATION tag is set to YES (the default)	# If the REFERENCES_RELATION tag is set to YES
# then for each documented function all documented entities	# then for each documented function all documented entities
# called/used by that function will be listed.	# called/used by that function will be listed.

REFERENCES_RELATION = YES	REFERENCES_RELATION = YES

# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen	# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
# will generate a verbatim copy of the header file for each class for	# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
	# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
	# link to the source code.
	# Otherwise they will link to the documentation.

	REFERENCES_LINK_SOURCE = YES

	# If the USE_HTAGS tag is set to YES then the references to source code
	# will point to the HTML generated by the htags(1) tool instead of doxygen
	# built-in source browser. The htags tool is part of GNU's global source
	# tagging system (see http://www.gnu.org/software/global/global.html). You
	# will need version 4.8.6 or higher.

	USE_HTAGS = NO

	# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
	# will generate a verbatim copy of the header file for each class for
# which an include is specified. Set to NO to disable this.	# which an include is specified. Set to NO to disable this.

VERBATIM_HEADERS = YES	VERBATIM_HEADERS = YES
Line 467 VERBATIM_HEADERS = YES	Line 787 VERBATIM_HEADERS = YES
# configuration options related to the alphabetical class index	# configuration options related to the alphabetical class index
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index	# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
# of all compounds will be generated. Enable this if the project	# of all compounds will be generated. Enable this if the project
# contains a lot of classes, structs, unions or interfaces.	# contains a lot of classes, structs, unions or interfaces.

ALPHABETICAL_INDEX = NO	ALPHABETICAL_INDEX = NO

# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then	# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns	# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
# in which this list will be split (can be a number in the range [1..20])	# in which this list will be split (can be a number in the range [1..20])

COLS_IN_ALPHA_INDEX = 5	COLS_IN_ALPHA_INDEX = 5

# In case all classes in a project start with a common prefix, all	# In case all classes in a project start with a common prefix, all
# classes will be put under the same header in the alphabetical index.	# classes will be put under the same header in the alphabetical index.
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that	# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
# should be ignored while generating the index headers.	# should be ignored while generating the index headers.

IGNORE_PREFIX =	IGNORE_PREFIX =

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# configuration options related to the HTML output	# configuration options related to the HTML output
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the GENERATE_HTML tag is set to YES (the default) Doxygen will	# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
# generate HTML output.	# generate HTML output.

GENERATE_HTML = YES	GENERATE_HTML = YES

# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.	# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path.	# put in front of it. If left blank `html' will be used as the default path.

HTML_OUTPUT = html	HTML_OUTPUT = html

# The HTML_FILE_EXTENSION tag can be used to specify the file extension for	# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank	# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
# doxygen will generate files with .html extension.	# doxygen will generate files with .html extension.

HTML_FILE_EXTENSION = .html	HTML_FILE_EXTENSION = .html

# The HTML_HEADER tag can be used to specify a personal HTML header for	# The HTML_HEADER tag can be used to specify a personal HTML header for
# each generated HTML page. If it is left blank doxygen will generate a	# each generated HTML page. If it is left blank doxygen will generate a
# standard header.	# standard header. Note that when using a custom header you are responsible
	# for the proper inclusion of any scripts and style sheets that doxygen
	# needs, which is dependent on the configuration options used.
	# It is adviced to generate a default header using "doxygen -w html
	# header.html footer.html stylesheet.css YourConfigFile" and then modify
	# that header. Note that the header is subject to change so you typically
	# have to redo this when upgrading to a newer version of doxygen or when changing the value of configuration settings such as GENERATE_TREEVIEW!

HTML_HEADER =	HTML_HEADER =

# The HTML_FOOTER tag can be used to specify a personal HTML footer for	# The HTML_FOOTER tag can be used to specify a personal HTML footer for
# each generated HTML page. If it is left blank doxygen will generate a	# each generated HTML page. If it is left blank doxygen will generate a
# standard footer.	# standard footer.

HTML_FOOTER =	HTML_FOOTER =

# The HTML_STYLESHEET tag can be used to specify a user-defined cascading	# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
# style sheet that is used by each HTML page. It can be used to	# style sheet that is used by each HTML page. It can be used to
# fine-tune the look of the HTML output. If the tag is left blank doxygen	# fine-tune the look of the HTML output. If the tag is left blank doxygen
# will generate a default style sheet	# will generate a default style sheet. Note that doxygen will try to copy
	# the style sheet file to the HTML output directory, so don't put your own
	# stylesheet in the HTML output directory as well, or it will be erased!

HTML_STYLESHEET =	HTML_STYLESHEET =

# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,	# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# files or namespaces will be aligned in HTML using tables. If set to	# other source files which should be copied to the HTML output directory. Note
	# that these files will be copied to the base HTML output directory. Use the
	# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
	# files. In the HTML_STYLESHEET file, use the file name only. Also note that
	# the files will be copied as-is; there are no commands or markers available.

	HTML_EXTRA_FILES =

	# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
	# Doxygen will adjust the colors in the stylesheet and background images
	# according to this color. Hue is specified as an angle on a colorwheel,
	# see http://en.wikipedia.org/wiki/Hue for more information.
	# For instance the value 0 represents red, 60 is yellow, 120 is green,
	# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
	# The allowed range is 0 to 359.

	HTML_COLORSTYLE_HUE = 220

	# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
	# the colors in the HTML output. For a value of 0 the output will use
	# grayscales only. A value of 255 will produce the most vivid colors.

	HTML_COLORSTYLE_SAT = 100

	# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
	# the luminance component of the colors in the HTML output. Values below
	# 100 gradually make the output lighter, whereas values above 100 make
	# the output darker. The value divided by 100 is the actual gamma applied,
	# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
	# and 100 does not change the gamma.

	HTML_COLORSTYLE_GAMMA = 80

	# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
	# page will contain the date and time when the page was generated. Setting
	# this to NO can help when comparing the output of multiple runs.

	HTML_TIMESTAMP = YES

	# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
	# files or namespaces will be aligned in HTML using tables. If set to
# NO a bullet list will be used.	# NO a bullet list will be used.

HTML_ALIGN_MEMBERS = YES	HTML_ALIGN_MEMBERS = YES

# If the GENERATE_HTMLHELP tag is set to YES, additional index files	# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# will be generated that can be used as input for tools like the	# documentation will contain sections that can be hidden and shown after the
# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)	# page has loaded. For this to work a browser that supports
	# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
	# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

	HTML_DYNAMIC_SECTIONS = NO

	# If the GENERATE_DOCSET tag is set to YES, additional index files
	# will be generated that can be used as input for Apple's Xcode 3
	# integrated development environment, introduced with OSX 10.5 (Leopard).
	# To create a documentation set, doxygen will generate a Makefile in the
	# HTML output directory. Running make will produce the docset in that
	# directory and running "make install" will install the docset in
	# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
	# it at startup.
	# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
	# for more information.

	GENERATE_DOCSET = NO

	# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
	# feed. A documentation feed provides an umbrella under which multiple
	# documentation sets from a single provider (such as a company or product suite)
	# can be grouped.

	DOCSET_FEEDNAME = "Doxygen generated docs"

	# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
	# should uniquely identify the documentation set bundle. This should be a
	# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
	# will append .docset to the name.

	DOCSET_BUNDLE_ID = org.doxygen.Project

	# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
	# the documentation publisher. This should be a reverse domain-name style
	# string, e.g. com.mycompany.MyDocSet.documentation.

	DOCSET_PUBLISHER_ID = org.doxygen.Publisher

	# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.

	DOCSET_PUBLISHER_NAME = Publisher

	# If the GENERATE_HTMLHELP tag is set to YES, additional index files
	# will be generated that can be used as input for tools like the
	# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
# of the generated HTML documentation.	# of the generated HTML documentation.

GENERATE_HTMLHELP = NO	GENERATE_HTMLHELP = NO

# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can	# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
# be used to specify the file name of the resulting .chm file. You	# be used to specify the file name of the resulting .chm file. You
# can add a path in front of the file if the result should not be	# can add a path in front of the file if the result should not be
# written to the html output dir.	# written to the html output directory.

CHM_FILE =	CHM_FILE =

# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can	# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
# be used to specify the location (absolute path including file name) of	# be used to specify the location (absolute path including file name) of
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run	# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
# the HTML help compiler on the generated index.hhp.	# the HTML help compiler on the generated index.hhp.

HHC_LOCATION =	HHC_LOCATION =

# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag	# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
# controls if a separate .chi index file is generated (YES) or that	# controls if a separate .chi index file is generated (YES) or that
# it should be included in the master .chm file (NO).	# it should be included in the master .chm file (NO).

GENERATE_CHI = NO	GENERATE_CHI = NO

# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag	# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
# controls whether a binary table of contents is generated (YES) or a	# is used to encode HtmlHelp index (hhk), content (hhc) and project file
	# content.

	CHM_INDEX_ENCODING =

	# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
	# controls whether a binary table of contents is generated (YES) or a
# normal table of contents (NO) in the .chm file.	# normal table of contents (NO) in the .chm file.

BINARY_TOC = NO	BINARY_TOC = NO

# The TOC_EXPAND flag can be set to YES to add extra items for group members	# The TOC_EXPAND flag can be set to YES to add extra items for group members
# to the contents of the HTML help documentation and to the tree view.	# to the contents of the HTML help documentation and to the tree view.

TOC_EXPAND = NO	TOC_EXPAND = NO

# The DISABLE_INDEX tag can be used to turn on/off the condensed index at	# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
# top of each HTML page. The value NO (the default) enables the index and	# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
	# that can be used as input for Qt's qhelpgenerator to generate a
	# Qt Compressed Help (.qch) of the generated HTML documentation.

	GENERATE_QHP = NO

	# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
	# be used to specify the file name of the resulting .qch file.
	# The path specified is relative to the HTML output folder.

	QCH_FILE =

	# The QHP_NAMESPACE tag specifies the namespace to use when generating
	# Qt Help Project output. For more information please see
	# http://doc.trolltech.com/qthelpproject.html#namespace

	QHP_NAMESPACE = org.doxygen.Project

	# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
	# Qt Help Project output. For more information please see
	# http://doc.trolltech.com/qthelpproject.html#virtual-folders

	QHP_VIRTUAL_FOLDER = doc

	# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
	# add. For more information please see
	# http://doc.trolltech.com/qthelpproject.html#custom-filters

	QHP_CUST_FILTER_NAME =

	# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
	# custom filter to add. For more information please see
	# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
	# Qt Help Project / Custom Filters</a>.

	QHP_CUST_FILTER_ATTRS =

	# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
	# project's
	# filter section matches.
	# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
	# Qt Help Project / Filter Attributes</a>.

	QHP_SECT_FILTER_ATTRS =

	# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
	# be used to specify the location of Qt's qhelpgenerator.
	# If non-empty doxygen will try to run qhelpgenerator on the generated
	# .qhp file.

	QHG_LOCATION =

	# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
	# will be generated, which together with the HTML files, form an Eclipse help
	# plugin. To install this plugin and make it available under the help contents
	# menu in Eclipse, the contents of the directory containing the HTML and XML
	# files needs to be copied into the plugins directory of eclipse. The name of
	# the directory within the plugins directory should be the same as
	# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
	# the help appears.

	GENERATE_ECLIPSEHELP = NO

	# A unique identifier for the eclipse help plugin. When installing the plugin
	# the directory name containing the HTML and XML files should also have
	# this name.

	ECLIPSE_DOC_ID = org.doxygen.Project

	# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
	# top of each HTML page. The value NO (the default) enables the index and
# the value YES disables it.	# the value YES disables it.

DISABLE_INDEX = NO	DISABLE_INDEX = NO

# This tag can be used to set the number of enum values (range [1..20])	# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
# that doxygen will group on one line in the generated HTML documentation.	# (range [0,1..20]) that doxygen will group on one line in the generated HTML
	# documentation. Note that a value of 0 will completely suppress the enum
	# values from appearing in the overview section.

ENUM_VALUES_PER_LINE = 4	ENUM_VALUES_PER_LINE = 4

# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be	# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# generated containing a tree-like index structure (just like the one that	# structure should be generated to display hierarchical information.
# is generated for HTML Help). For this to work a browser that supports	# If the tag value is set to YES, a side panel will be generated
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,	# containing a tree-like index structure (just like the one that
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are	# is generated for HTML Help). For this to work a browser that supports
# probably better off using the HTML help feature.	# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
	# Windows users are probably better off using the HTML help feature.

GENERATE_TREEVIEW = NO	GENERATE_TREEVIEW = NO

# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be	# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
# used to set the initial width (in pixels) of the frame in which the tree	# and Class Hierarchy pages using a tree view instead of an ordered list.

	USE_INLINE_TREES = NO

	# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
	# used to set the initial width (in pixels) of the frame in which the tree
# is shown.	# is shown.

TREEVIEW_WIDTH = 250	TREEVIEW_WIDTH = 250

	# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
	# links to external symbols imported via tag files in a separate window.

	EXT_LINKS_IN_WINDOW = NO

	# Use this tag to change the font size of Latex formulas included
	# as images in the HTML documentation. The default is 10. Note that
	# when you change the font size after a successful doxygen run you need
	# to manually remove any form_*.png images from the HTML output directory
	# to force them to be regenerated.

	FORMULA_FONTSIZE = 10

	# Use the FORMULA_TRANPARENT tag to determine whether or not the images
	# generated for formulas are transparent PNGs. Transparent PNGs are
	# not supported properly for IE 6.0, but are supported on all modern browsers.
	# Note that when changing this option you need to delete any form_*.png files
	# in the HTML output before the changes have effect.

	FORMULA_TRANSPARENT = YES

	# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
	# (see http://www.mathjax.org) which uses client side Javascript for the
	# rendering instead of using prerendered bitmaps. Use this if you do not
	# have LaTeX installed or if you want to formulas look prettier in the HTML
	# output. When enabled you also need to install MathJax separately and
	# configure the path to it using the MATHJAX_RELPATH option.

	USE_MATHJAX = NO

	# When MathJax is enabled you need to specify the location relative to the
	# HTML output directory using the MATHJAX_RELPATH option. The destination
	# directory should contain the MathJax.js script. For instance, if the mathjax
	# directory is located at the same level as the HTML output directory, then
	# MATHJAX_RELPATH should be ../mathjax. The default value points to the
	# mathjax.org site, so you can quickly see the result without installing
	# MathJax, but it is strongly recommended to install a local copy of MathJax
	# before deployment.

	MATHJAX_RELPATH = http://www.mathjax.org/mathjax

	# When the SEARCHENGINE tag is enabled doxygen will generate a search box
	# for the HTML output. The underlying search engine uses javascript
	# and DHTML and should work on any modern browser. Note that when using
	# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
	# (GENERATE_DOCSET) there is already a search function so this one should
	# typically be disabled. For large projects the javascript based search engine
	# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

	SEARCHENGINE = NO

	# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
	# implemented using a PHP enabled web server instead of at the web client
	# using Javascript. Doxygen will generate the search PHP script and index
	# file to put on the web server. The advantage of the server
	# based approach is that it scales better to large projects and allows
	# full text search. The disadvantages are that it is more difficult to setup
	# and does not have live searching capabilities.

	SERVER_BASED_SEARCH = NO

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# configuration options related to the LaTeX output	# configuration options related to the LaTeX output
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will	# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output.	# generate Latex output.

GENERATE_LATEX = NO	GENERATE_LATEX = NO

# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.	# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `latex' will be used as the default path.	# put in front of it. If left blank `latex' will be used as the default path.

LATEX_OUTPUT = latex	LATEX_OUTPUT = latex

# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be	# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked. If left blank `latex' will be used as the default command name.	# invoked. If left blank `latex' will be used as the default command name.
	# Note that when enabling USE_PDFLATEX this option is only used for
	# generating bitmaps for formulas in the HTML output, but not in the
	# Makefile that is written to the output directory.

LATEX_CMD_NAME = latex	LATEX_CMD_NAME = latex

# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to	# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
# generate index for LaTeX. If left blank `makeindex' will be used as the	# generate index for LaTeX. If left blank `makeindex' will be used as the
# default command name.	# default command name.

MAKEINDEX_CMD_NAME = makeindex	MAKEINDEX_CMD_NAME = makeindex

# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact	# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
# LaTeX documents. This may be useful for small projects and may help to	# LaTeX documents. This may be useful for small projects and may help to
# save some trees in general.	# save some trees in general.

COMPACT_LATEX = NO	COMPACT_LATEX = NO

# The PAPER_TYPE tag can be used to set the paper type that is used	# The PAPER_TYPE tag can be used to set the paper type that is used
# by the printer. Possible values are: a4, a4wide, letter, legal and	# by the printer. Possible values are: a4, letter, legal and
# executive. If left blank a4wide will be used.	# executive. If left blank a4wide will be used.

PAPER_TYPE = a4wide	PAPER_TYPE = a4wide

# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX	# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
# packages that should be included in the LaTeX output.	# packages that should be included in the LaTeX output.

EXTRA_PACKAGES =	EXTRA_PACKAGES =

# The LATEX_HEADER tag can be used to specify a personal LaTeX header for	# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
# the generated latex document. The header should contain everything until	# the generated latex document. The header should contain everything until
# the first chapter. If it is left blank doxygen will generate a	# the first chapter. If it is left blank doxygen will generate a
# standard header. Notice: only use this tag if you know what you are doing!	# standard header. Notice: only use this tag if you know what you are doing!

LATEX_HEADER =	LATEX_HEADER =

# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated	# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
# is prepared for conversion to pdf (using ps2pdf). The pdf file will	# the generated latex document. The footer should contain everything after
# contain links (just like the HTML output) instead of page references	# the last chapter. If it is left blank doxygen will generate a
	# standard footer. Notice: only use this tag if you know what you are doing!

	LATEX_FOOTER =

	# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
	# is prepared for conversion to pdf (using ps2pdf). The pdf file will
	# contain links (just like the HTML output) instead of page references
# This makes the output suitable for online browsing using a pdf viewer.	# This makes the output suitable for online browsing using a pdf viewer.

PDF_HYPERLINKS = NO	PDF_HYPERLINKS = NO

# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of	# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
# plain latex in the generated Makefile. Set this option to YES to get a	# plain latex in the generated Makefile. Set this option to YES to get a
# higher quality PDF documentation.	# higher quality PDF documentation.

USE_PDFLATEX = NO	USE_PDFLATEX = NO

# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.	# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
# command to the generated LaTeX files. This will instruct LaTeX to keep	# command to the generated LaTeX files. This will instruct LaTeX to keep
# running if errors occur, instead of asking the user for help.	# running if errors occur, instead of asking the user for help.
# This option is also used when generating formulas in HTML.	# This option is also used when generating formulas in HTML.

LATEX_BATCHMODE = NO	LATEX_BATCHMODE = NO

# If LATEX_HIDE_INDICES is set to YES then doxygen will not	# If LATEX_HIDE_INDICES is set to YES then doxygen will not
# include the index chapters (such as File Index, Compound Index, etc.)	# include the index chapters (such as File Index, Compound Index, etc.)
# in the output.	# in the output.

LATEX_HIDE_INDICES = NO	LATEX_HIDE_INDICES = NO

	# If LATEX_SOURCE_CODE is set to YES then doxygen will include
	# source code with syntax highlighting in the LaTeX output.
	# Note that which sources are shown also depends on other settings
	# such as SOURCE_BROWSER.

	LATEX_SOURCE_CODE = NO

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# configuration options related to the RTF output	# configuration options related to the RTF output
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output	# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
# The RTF output is optimised for Word 97 and may not look very pretty with	# The RTF output is optimized for Word 97 and may not look very pretty with
# other RTF readers or editors.	# other RTF readers or editors.

GENERATE_RTF = NO	GENERATE_RTF = NO

# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.	# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `rtf' will be used as the default path.	# put in front of it. If left blank `rtf' will be used as the default path.

RTF_OUTPUT = rtf	RTF_OUTPUT = rtf

# If the COMPACT_RTF tag is set to YES Doxygen generates more compact	# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
# RTF documents. This may be useful for small projects and may help to	# RTF documents. This may be useful for small projects and may help to
# save some trees in general.	# save some trees in general.

COMPACT_RTF = NO	COMPACT_RTF = NO

# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated	# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
# will contain hyperlink fields. The RTF file will	# will contain hyperlink fields. The RTF file will
# contain links (just like the HTML output) instead of page references.	# contain links (just like the HTML output) instead of page references.
# This makes the output suitable for online browsing using WORD or other	# This makes the output suitable for online browsing using WORD or other
# programs which support those fields.	# programs which support those fields.
# Note: wordpad (write) and others do not support links.	# Note: wordpad (write) and others do not support links.

RTF_HYPERLINKS = NO	RTF_HYPERLINKS = NO

# Load stylesheet definitions from file. Syntax is similar to doxygen's	# Load stylesheet definitions from file. Syntax is similar to doxygen's
# config file, i.e. a series of assigments. You only have to provide	# config file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value.	# replacements, missing definitions are set to their default value.

RTF_STYLESHEET_FILE =	RTF_STYLESHEET_FILE =

# Set optional variables used in the generation of an rtf document.	# Set optional variables used in the generation of an rtf document.
# Syntax is similar to doxygen's config file.	# Syntax is similar to doxygen's config file.

RTF_EXTENSIONS_FILE =	RTF_EXTENSIONS_FILE =

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# configuration options related to the man page output	# configuration options related to the man page output
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the GENERATE_MAN tag is set to YES (the default) Doxygen will	# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
# generate man pages	# generate man pages

GENERATE_MAN = YES	GENERATE_MAN = YES

# The MAN_OUTPUT tag is used to specify where the man pages will be put.	# The MAN_OUTPUT tag is used to specify where the man pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `man' will be used as the default path.	# put in front of it. If left blank `man' will be used as the default path.

MAN_OUTPUT = man	MAN_OUTPUT = man

# The MAN_EXTENSION tag determines the extension that is added to	# The MAN_EXTENSION tag determines the extension that is added to
# the generated man pages (default is the subroutine's section .3)	# the generated man pages (default is the subroutine's section .3)

MAN_EXTENSION = .3	MAN_EXTENSION = .3

# If the MAN_LINKS tag is set to YES and Doxygen generates man output,	# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
# then it will generate one additional man file for each entity	# then it will generate one additional man file for each entity
# documented in the real man page(s). These additional files	# documented in the real man page(s). These additional files
# only source the real man page, but without them the man command	# only source the real man page, but without them the man command
# would be unable to find the correct page. The default is NO.	# would be unable to find the correct page. The default is NO.

MAN_LINKS = NO	MAN_LINKS = NO
Line 746 MAN_LINKS = NO	Line 1321 MAN_LINKS = NO
# configuration options related to the XML output	# configuration options related to the XML output
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the GENERATE_XML tag is set to YES Doxygen will	# If the GENERATE_XML tag is set to YES Doxygen will
# generate an XML file that captures the structure of	# generate an XML file that captures the structure of
# the code including all documentation. Note that this	# the code including all documentation.
# feature is still experimental and incomplete at the
# moment.

GENERATE_XML = NO	GENERATE_XML = NO

# The XML_OUTPUT tag is used to specify where the XML pages will be put.	# The XML_OUTPUT tag is used to specify where the XML pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `xml' will be used as the default path.	# put in front of it. If left blank `xml' will be used as the default path.

XML_OUTPUT = xml	XML_OUTPUT = xml

# The XML_SCHEMA tag can be used to specify an XML schema,	# The XML_SCHEMA tag can be used to specify an XML schema,
# which can be used by a validating XML parser to check the	# which can be used by a validating XML parser to check the
# syntax of the XML files.	# syntax of the XML files.

XML_SCHEMA =	XML_SCHEMA =

# The XML_DTD tag can be used to specify an XML DTD,	# The XML_DTD tag can be used to specify an XML DTD,
# which can be used by a validating XML parser to check the	# which can be used by a validating XML parser to check the
# syntax of the XML files.	# syntax of the XML files.

XML_DTD =	XML_DTD =

	# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
	# dump the program listings (including syntax highlighting
	# and cross-referencing information) to the XML output. Note that
	# enabling this will significantly increase the size of the XML output.

	XML_PROGRAMLISTING = YES

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output	# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will	# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
# generate an AutoGen Definitions (see autogen.sf.net) file	# generate an AutoGen Definitions (see autogen.sf.net) file
# that captures the structure of the code including all	# that captures the structure of the code including all
# documentation. Note that this feature is still experimental	# documentation. Note that this feature is still experimental
# and incomplete at the moment.	# and incomplete at the moment.

GENERATE_AUTOGEN_DEF = NO	GENERATE_AUTOGEN_DEF = NO
Line 788 GENERATE_AUTOGEN_DEF = NO	Line 1368 GENERATE_AUTOGEN_DEF = NO
# configuration options related to the Perl module output	# configuration options related to the Perl module output
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the GENERATE_PERLMOD tag is set to YES Doxygen will	# If the GENERATE_PERLMOD tag is set to YES Doxygen will
# generate a Perl module file that captures the structure of	# generate a Perl module file that captures the structure of
# the code including all documentation. Note that this	# the code including all documentation. Note that this
# feature is still experimental and incomplete at the	# feature is still experimental and incomplete at the
# moment.	# moment.

GENERATE_PERLMOD = NO	GENERATE_PERLMOD = NO

# If the PERLMOD_LATEX tag is set to YES Doxygen will generate	# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
# the necessary Makefile rules, Perl scripts and LaTeX code to be able	# the necessary Makefile rules, Perl scripts and LaTeX code to be able
# to generate PDF and DVI output from the Perl module output.	# to generate PDF and DVI output from the Perl module output.

PERLMOD_LATEX = NO	PERLMOD_LATEX = NO

# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be	# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
# nicely formatted so it can be parsed by a human reader. This is useful	# nicely formatted so it can be parsed by a human reader.
# if you want to understand what is going on. On the other hand, if this	# This is useful
# tag is set to NO the size of the Perl module output will be much smaller	# if you want to understand what is going on.
	# On the other hand, if this
	# tag is set to NO the size of the Perl module output will be much smaller
# and Perl will parse it just the same.	# and Perl will parse it just the same.

PERLMOD_PRETTY = YES	PERLMOD_PRETTY = YES

# The names of the make variables in the generated doxyrules.make file	# The names of the make variables in the generated doxyrules.make file
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.	# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
# This is useful so different doxyrules.make files included by the same	# This is useful so different doxyrules.make files included by the same
# Makefile don't overwrite each other's variables.	# Makefile don't overwrite each other's variables.

PERLMOD_MAKEVAR_PREFIX =	PERLMOD_MAKEVAR_PREFIX =

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# Configuration options related to the preprocessor	# Configuration options related to the preprocessor
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will	# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
# evaluate all C-preprocessor directives found in the sources and include	# evaluate all C-preprocessor directives found in the sources and include
# files.	# files.

ENABLE_PREPROCESSING = YES	ENABLE_PREPROCESSING = YES

# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro	# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
# names in the source code. If set to NO (the default) only conditional	# names in the source code. If set to NO (the default) only conditional
# compilation will be performed. Macro expansion can be done in a controlled	# compilation will be performed. Macro expansion can be done in a controlled
# way by setting EXPAND_ONLY_PREDEF to YES.	# way by setting EXPAND_ONLY_PREDEF to YES.

MACRO_EXPANSION = NO	MACRO_EXPANSION = NO

# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES	# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
# then the macro expansion is limited to the macros specified with the	# then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_PREDEFINED tags.	# PREDEFINED and EXPAND_AS_DEFINED tags.

EXPAND_ONLY_PREDEF = NO	EXPAND_ONLY_PREDEF = NO

# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files	# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# in the INCLUDE_PATH (see below) will be search if a #include is found.	# pointed to by INCLUDE_PATH will be searched when a #include is found.

SEARCH_INCLUDES = YES	SEARCH_INCLUDES = YES

# The INCLUDE_PATH tag can be used to specify one or more directories that	# The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by	# contain include files that are not input files but should be processed by
# the preprocessor.	# the preprocessor.

INCLUDE_PATH =	INCLUDE_PATH =

# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard	# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like .h and .hpp) to filter out the header-files in the	# patterns (like .h and .hpp) to filter out the header-files in the
# directories. If left blank, the patterns specified with FILE_PATTERNS will	# directories. If left blank, the patterns specified with FILE_PATTERNS will
# be used.	# be used.

INCLUDE_FILE_PATTERNS =	INCLUDE_FILE_PATTERNS =

# The PREDEFINED tag can be used to specify one or more macro names that	# The PREDEFINED tag can be used to specify one or more macro names that
# are defined before the preprocessor is started (similar to the -D option of	# are defined before the preprocessor is started (similar to the -D option of
# gcc). The argument of the tag is a list of macros of the form: name	# gcc). The argument of the tag is a list of macros of the form: name
# or name=definition (no spaces). If the definition and the = are	# or name=definition (no spaces). If the definition and the = are
# omitted =1 is assumed.	# omitted =1 is assumed. To prevent a macro definition from being
	# undefined via #undef or recursively expanded use the := operator
	# instead of the = operator.

PREDEFINED =	PREDEFINED =

# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then	# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# this tag can be used to specify a list of macro names that should be expanded.	# this tag can be used to specify a list of macro names that should be expanded.
# The macro definition that is found in the sources will be used.	# The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro definition.	# Use the PREDEFINED tag if you want to use a different macro definition that
	# overrules the definition found in the source code.

EXPAND_AS_DEFINED =	EXPAND_AS_DEFINED =

# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then	# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
# doxygen's preprocessor will remove all function-like macros that are alone	# doxygen's preprocessor will remove all references to function-like macros
# on a line, have an all uppercase name, and do not end with a semicolon. Such	# that are alone on a line, have an all uppercase name, and do not end with a
# function macros are typically used for boiler-plate code, and will confuse the	# semicolon, because these will confuse the parser if not removed.
# parser if not removed.

SKIP_FUNCTION_MACROS = YES	SKIP_FUNCTION_MACROS = YES

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# Configuration::addtions related to external references	# Configuration::additions related to external references
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# The TAGFILES option can be used to specify one or more tagfiles.	# The TAGFILES option can be used to specify one or more tagfiles.
# Optionally an initial location of the external documentation	# Optionally an initial location of the external documentation
# can be added for each tagfile. The format of a tag file without	# can be added for each tagfile. The format of a tag file without
# this location is as follows:	# this location is as follows:
# TAGFILES = file1 file2 ...	#
# Adding location for the tag files is done as follows:	# TAGFILES = file1 file2 ...
# TAGFILES = file1=loc1 "file2 = loc2" ...	# Adding location for the tag files is done as follows:
# where "loc1" and "loc2" can be relative or absolute paths or	#
# URLs. If a location is present for each tag, the installdox tool	# TAGFILES = file1=loc1 "file2 = loc2" ...
	# where "loc1" and "loc2" can be relative or absolute paths or
	# URLs. If a location is present for each tag, the installdox tool
# does not have to be run to correct the links.	# does not have to be run to correct the links.
# Note that each tag file must have a unique name	# Note that each tag file must have a unique name
# (where the name does NOT include the path)	# (where the name does NOT include the path)
# If a tag file is not located in the directory in which doxygen	# If a tag file is not located in the directory in which doxygen
# is run, you must also specify the path to the tagfile here.	# is run, you must also specify the path to the tagfile here.

TAGFILES =	TAGFILES =

# When a file name is specified after GENERATE_TAGFILE, doxygen will create	# When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads.	# a tag file that is based on the input files it reads.

GENERATE_TAGFILE =	GENERATE_TAGFILE =

# If the ALLEXTERNALS tag is set to YES all external classes will be listed	# If the ALLEXTERNALS tag is set to YES all external classes will be listed
# in the class index. If set to NO only the inherited external classes	# in the class index. If set to NO only the inherited external classes
# will be listed.	# will be listed.

ALLEXTERNALS = NO	ALLEXTERNALS = NO

# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed	# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
# in the modules index. If set to NO, only the current project's groups will	# in the modules index. If set to NO, only the current project's groups will
# be listed.	# be listed.

EXTERNAL_GROUPS = YES	EXTERNAL_GROUPS = YES

# The PERL_PATH should be the absolute path and name of the perl script	# The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl').	# interpreter (i.e. the result of `which perl').

PERL_PATH = /usr/bin/perl	PERL_PATH = /usr/bin/perl

#---------------------------------------------------------------------------	#---------------------------------------------------------------------------
# Configuration options related to the dot tool	# Configuration options related to the dot tool
#---------------------------------------------------------------------------	#---------------------------------------------------------------------------

# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will	# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or	# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
# super classes. Setting the tag to NO turns the diagrams off. Note that this	# or super classes. Setting the tag to NO turns the diagrams off. Note that
# option is superceded by the HAVE_DOT option below. This is only a fallback. It is	# this option also works with HAVE_DOT disabled, but it is recommended to
# recommended to install and use dot, since it yields more powerful graphs.	# install and use dot, since it yields more powerful graphs.

CLASS_DIAGRAMS = YES	CLASS_DIAGRAMS = YES

# If set to YES, the inheritance and collaboration graphs will hide	# You can define message sequence charts within doxygen comments using the \msc
# inheritance and usage relations if the target is undocumented	# command. Doxygen will then run the mscgen tool (see
	# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
	# documentation. The MSCGEN_PATH tag allows you to specify the directory where
	# the mscgen tool resides. If left empty the tool is assumed to be found in the
	# default search path.

	MSCGEN_PATH =

	# If set to YES, the inheritance and collaboration graphs will hide
	# inheritance and usage relations if the target is undocumented
# or is not a class.	# or is not a class.

HIDE_UNDOC_RELATIONS = YES	HIDE_UNDOC_RELATIONS = YES

# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is	# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz, a graph visualization	# available from the path. This tool is part of Graphviz, a graph visualization
# toolkit from AT&T and Lucent Bell Labs. The other options in this section	# toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default)	# have no effect if this option is set to NO (the default)

HAVE_DOT = NO	HAVE_DOT = NO

# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen	# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
# will generate a graph for each documented class showing the direct and	# allowed to run in parallel. When set to 0 (the default) doxygen will
# indirect inheritance relations. Setting this tag to YES will force the	# base this on the number of processors available in the system. You can set it
	# explicitly to a value larger than 0 to get control over the balance
	# between CPU load and processing speed.

	DOT_NUM_THREADS = 0

	# By default doxygen will write a font called Helvetica to the output
	# directory and reference it in all dot files that doxygen generates.
	# When you want a differently looking font you can specify the font name
	# using DOT_FONTNAME. You need to make sure dot is able to find the font,
	# which can be done by putting it in a standard location or by setting the
	# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
	# containing the font.

	DOT_FONTNAME = Helvetica

	# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
	# The default size is 10pt.

	DOT_FONTSIZE = 10

	# By default doxygen will tell dot to use the output directory to look for the
	# FreeSans.ttf font (which doxygen will put there itself). If you specify a
	# different font using DOT_FONTNAME you can set the path where dot
	# can find it using this tag.

	DOT_FONTPATH =

	# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
	# will generate a graph for each documented class showing the direct and
	# indirect inheritance relations. Setting this tag to YES will force the
# the CLASS_DIAGRAMS tag to NO.	# the CLASS_DIAGRAMS tag to NO.

CLASS_GRAPH = YES	CLASS_GRAPH = YES

# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen	# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and	# will generate a graph for each documented class showing the direct and
# indirect implementation dependencies (inheritance, containment, and	# indirect implementation dependencies (inheritance, containment, and
# class references variables) of the class with other documented classes.	# class references variables) of the class with other documented classes.

COLLABORATION_GRAPH = YES	COLLABORATION_GRAPH = YES

# If the UML_LOOK tag is set to YES doxygen will generate inheritance and	# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
# colloborations diagrams in a style similiar to the OMG's Unified Modeling	# will generate a graph for groups, showing the direct groups dependencies

	GROUP_GRAPHS = YES

	# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
	# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language.	# Language.

UML_LOOK = NO	UML_LOOK = NO

# If set to YES, the inheritance and collaboration graphs will show the	# If set to YES, the inheritance and collaboration graphs will show the
# relations between templates and their instances.	# relations between templates and their instances.

TEMPLATE_RELATIONS = NO	TEMPLATE_RELATIONS = NO

# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT	# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
# tags are set to YES then doxygen will generate a graph for each documented	# tags are set to YES then doxygen will generate a graph for each documented
# file showing the direct and indirect include dependencies of the file with	# file showing the direct and indirect include dependencies of the file with
# other documented files.	# other documented files.

INCLUDE_GRAPH = YES	INCLUDE_GRAPH = YES

# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and	# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each	# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
# documented header file showing the documented files that directly or	# documented header file showing the documented files that directly or
# indirectly include this file.	# indirectly include this file.

INCLUDED_BY_GRAPH = YES	INCLUDED_BY_GRAPH = YES

# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will	# If the CALL_GRAPH and HAVE_DOT options are set to YES then
# generate a call dependency graph for every global function or class method.	# doxygen will generate a call dependency graph for every global function
# Note that enabling this option will significantly increase the time of a run.	# or class method. Note that enabling this option will significantly increase
# So in most cases it will be better to enable call graphs for selected	# the time of a run. So in most cases it will be better to enable call graphs
# functions only using the \callgraph command.	# for selected functions only using the \callgraph command.

CALL_GRAPH = NO	CALL_GRAPH = NO

# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen	# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
# will graphical hierarchy of all classes instead of a textual one.	# doxygen will generate a caller dependency graph for every global function
	# or class method. Note that enabling this option will significantly increase
	# the time of a run. So in most cases it will be better to enable caller
	# graphs for selected functions only using the \callergraph command.

	CALLER_GRAPH = NO

	# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
	# will generate a graphical hierarchy of all classes instead of a textual one.

GRAPHICAL_HIERARCHY = YES	GRAPHICAL_HIERARCHY = YES

# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images	# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
# generated by dot. Possible values are png, jpg, or gif	# then doxygen will show the dependencies a directory has on other directories
	# in a graphical way. The dependency relations are determined by the #include
	# relations between the files in the directories.

	DIRECTORY_GRAPH = YES

	# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
	# generated by dot. Possible values are svg, png, jpg, or gif.
# If left blank png will be used.	# If left blank png will be used.

DOT_IMAGE_FORMAT = png	DOT_IMAGE_FORMAT = png

# The tag DOT_PATH can be used to specify the path where the dot tool can be	# The tag DOT_PATH can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found on the path.	# found. If left blank, it is assumed the dot tool can be found in the path.

DOT_PATH =	DOT_PATH =

# The DOTFILE_DIRS tag can be used to specify one or more directories that	# The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the	# contain dot files that are included in the documentation (see the
# \dotfile command).	# \dotfile command).

DOTFILE_DIRS =	DOTFILE_DIRS =

# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width	# The MSCFILE_DIRS tag can be used to specify one or more directories that
# (in pixels) of the graphs generated by dot. If a graph becomes larger than	# contain msc files that are included in the documentation (see the
# this value, doxygen will try to truncate the graph, so that it fits within	# \mscfile command).
# the specified constraint. Beware that most browsers cannot cope with very
# large images.

MAX_DOT_GRAPH_WIDTH = 1024	MSCFILE_DIRS =

# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height	# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
# (in pixels) of the graphs generated by dot. If a graph becomes larger than	# nodes that will be shown in the graph. If the number of nodes in a graph
# this value, doxygen will try to truncate the graph, so that it fits within	# becomes larger than this value, doxygen will truncate the graph, which is
# the specified constraint. Beware that most browsers cannot cope with very	# visualized by representing a node as a red box. Note that doxygen if the
# large images.	# number of direct children of the root node in a graph is already larger than
	# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
	# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

MAX_DOT_GRAPH_HEIGHT = 1024	DOT_GRAPH_MAX_NODES = 50

# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the	# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
# graphs generated by dot. A depth value of 3 means that only nodes reachable	# graphs generated by dot. A depth value of 3 means that only nodes reachable
# from the root by following a path via at most 3 edges will be shown. Nodes that	# from the root by following a path via at most 3 edges will be shown. Nodes
# lay further from the root node will be omitted. Note that setting this option to	# that lay further from the root node will be omitted. Note that setting this
# 1 or 2 may greatly reduce the computation time needed for large code bases. Also	# option to 1 or 2 may greatly reduce the computation time needed for large
# note that a graph may be further truncated if the graph's image dimensions are	# code bases. Also note that the size of a graph can be further restricted by
# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).	# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
# If 0 is used for the depth value (the default), the graph is not depth-constrained.

MAX_DOT_GRAPH_DEPTH = 0	MAX_DOT_GRAPH_DEPTH = 0

# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will	# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
# generate a legend page explaining the meaning of the various boxes and	# background. This is disabled by default, because dot on Windows does not
# arrows in the dot generated graphs.	# seem to support this out of the box. Warning: Depending on the platform used,
	# enabling this option may lead to badly anti-aliased labels on the edges of
	# a graph (i.e. they become hard to read).

GENERATE_LEGEND = YES	DOT_TRANSPARENT = NO

# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will	# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
# remove the intermediate dot files that are used to generate	# files in one run (i.e. multiple -o and -T options on the command line). This
# the various graphs.	# makes dot run faster, but since only newer versions of dot (>1.8.10)
	# support this, this feature is disabled by default.

DOT_CLEANUP = YES	DOT_MULTI_TARGETS = NO

#---------------------------------------------------------------------------	# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
# Configuration::addtions related to the search engine	# generate a legend page explaining the meaning of the various boxes and
#---------------------------------------------------------------------------	# arrows in the dot generated graphs.

# The SEARCHENGINE tag specifies whether or not a search engine should be	GENERATE_LEGEND = YES
# used. If set to NO the values of all tags below this one will be ignored.

SEARCHENGINE = NO	# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
	# remove the intermediate dot files that are used to generate
	# the various graphs.

# The CGI_NAME tag should be the name of the CGI script that	DOT_CLEANUP = YES
# starts the search engine (doxysearch) with the correct parameters.
# A script with this name will be generated by doxygen.

CGI_NAME = search.cgi

# The CGI_URL tag should be the absolute URL to the directory where the
# cgi binaries are located. See the documentation of your http daemon for
# details.

CGI_URL =

# The DOC_URL tag should be the absolute URL to the directory where the
# documentation is located. If left blank the absolute path to the
# documentation, with file:// prepended to it, will be used.

DOC_URL =

# The DOC_ABSPATH tag should be the absolute path to the directory where the
# documentation is located. If left blank the directory on the local machine
# will be used.

DOC_ABSPATH =

# The BIN_ABSPATH tag must point to the directory where the doxysearch binary
# is installed.

BIN_ABSPATH = /usr/local/bin/

# The EXT_DOC_PATHS tag can be used to specify one or more paths to
# documentation generated for other projects. This allows doxysearch to search
# the documentation for these projects as well.

EXT_DOC_PATHS =

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.1.1.1
changed lines
	Added in v.1.1.1.2