Annotation of embedaddon/libnet/doc/man/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
! 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
! 6: # Inc.
! 7: # This Makefile.in is free software; the Free Software Foundation
! 8: # gives unlimited permission to copy and/or distribute it,
! 9: # with or without modifications, as long as this notice is preserved.
! 10:
! 11: # This program is distributed in the hope that it will be useful,
! 12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 14: # PARTICULAR PURPOSE.
! 15:
! 16: @SET_MAKE@
! 17: VPATH = @srcdir@
! 18: pkgdatadir = $(datadir)/@PACKAGE@
! 19: pkgincludedir = $(includedir)/@PACKAGE@
! 20: pkglibdir = $(libdir)/@PACKAGE@
! 21: pkglibexecdir = $(libexecdir)/@PACKAGE@
! 22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 23: install_sh_DATA = $(install_sh) -c -m 644
! 24: install_sh_PROGRAM = $(install_sh) -c
! 25: install_sh_SCRIPT = $(install_sh) -c
! 26: INSTALL_HEADER = $(INSTALL_DATA)
! 27: transform = $(program_transform_name)
! 28: NORMAL_INSTALL = :
! 29: PRE_INSTALL = :
! 30: POST_INSTALL = :
! 31: NORMAL_UNINSTALL = :
! 32: PRE_UNINSTALL = :
! 33: POST_UNINSTALL = :
! 34: build_triplet = @build@
! 35: host_triplet = @host@
! 36: target_triplet = @target@
! 37: subdir = doc/man
! 38: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
! 39: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 40: am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
! 41: $(top_srcdir)/configure.in
! 42: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 43: $(ACLOCAL_M4)
! 44: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
! 45: CONFIG_HEADER = $(top_builddir)/include/config.h
! 46: CONFIG_CLEAN_FILES =
! 47: CONFIG_CLEAN_VPATH_FILES =
! 48: SOURCES =
! 49: DIST_SOURCES =
! 50: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
! 51: html-recursive info-recursive install-data-recursive \
! 52: install-dvi-recursive install-exec-recursive \
! 53: install-html-recursive install-info-recursive \
! 54: install-pdf-recursive install-ps-recursive install-recursive \
! 55: installcheck-recursive installdirs-recursive pdf-recursive \
! 56: ps-recursive uninstall-recursive
! 57: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
! 58: distclean-recursive maintainer-clean-recursive
! 59: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
! 60: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
! 61: distdir
! 62: ETAGS = etags
! 63: CTAGS = ctags
! 64: DIST_SUBDIRS = $(SUBDIRS)
! 65: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 66: am__relativize = \
! 67: dir0=`pwd`; \
! 68: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
! 69: sed_rest='s,^[^/]*/*,,'; \
! 70: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
! 71: sed_butlast='s,/*[^/]*$$,,'; \
! 72: while test -n "$$dir1"; do \
! 73: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
! 74: if test "$$first" != "."; then \
! 75: if test "$$first" = ".."; then \
! 76: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
! 77: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
! 78: else \
! 79: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
! 80: if test "$$first2" = "$$first"; then \
! 81: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
! 82: else \
! 83: dir2="../$$dir2"; \
! 84: fi; \
! 85: dir0="$$dir0"/"$$first"; \
! 86: fi; \
! 87: fi; \
! 88: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
! 89: done; \
! 90: reldir="$$dir2"
! 91: ACLOCAL = @ACLOCAL@
! 92: ADDITIONAL_LIBS = @ADDITIONAL_LIBS@
! 93: AMTAR = @AMTAR@
! 94: AR = @AR@
! 95: AUTOCONF = @AUTOCONF@
! 96: AUTOHEADER = @AUTOHEADER@
! 97: AUTOMAKE = @AUTOMAKE@
! 98: AWK = @AWK@
! 99: CC = @CC@
! 100: CCDEPMODE = @CCDEPMODE@
! 101: CFLAGS = @CFLAGS@
! 102: CPP = @CPP@
! 103: CPPFLAGS = @CPPFLAGS@
! 104: CYGPATH_W = @CYGPATH_W@
! 105: DEFS = @DEFS@
! 106: DEPDIR = @DEPDIR@
! 107: DLLTOOL = @DLLTOOL@
! 108: DSYMUTIL = @DSYMUTIL@
! 109: DUMPBIN = @DUMPBIN@
! 110: ECHO_C = @ECHO_C@
! 111: ECHO_N = @ECHO_N@
! 112: ECHO_T = @ECHO_T@
! 113: EGREP = @EGREP@
! 114: ENDIANESS = @ENDIANESS@
! 115: EXEEXT = @EXEEXT@
! 116: FGREP = @FGREP@
! 117: GREP = @GREP@
! 118: HAVE_PACKET_SOCKET = @HAVE_PACKET_SOCKET@
! 119: INSTALL = @INSTALL@
! 120: INSTALL_DATA = @INSTALL_DATA@
! 121: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 122: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 123: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 124: LD = @LD@
! 125: LDFLAGS = @LDFLAGS@
! 126: LIBNET_CONFIG_CFLAGS = @LIBNET_CONFIG_CFLAGS@
! 127: LIBNET_CONFIG_DEFINES = @LIBNET_CONFIG_DEFINES@
! 128: LIBNET_CONFIG_LIBS = @LIBNET_CONFIG_LIBS@
! 129: LIBOBJS = @LIBOBJS@
! 130: LIBS = @LIBS@
! 131: LIBTOOL = @LIBTOOL@
! 132: LIPO = @LIPO@
! 133: LN_S = @LN_S@
! 134: LTLIBOBJS = @LTLIBOBJS@
! 135: MAINT = @MAINT@
! 136: MAKEINFO = @MAKEINFO@
! 137: MANIFEST_TOOL = @MANIFEST_TOOL@
! 138: MKDIR_P = @MKDIR_P@
! 139: NM = @NM@
! 140: NMEDIT = @NMEDIT@
! 141: OBJDUMP = @OBJDUMP@
! 142: OBJEXT = @OBJEXT@
! 143: OTOOL = @OTOOL@
! 144: OTOOL64 = @OTOOL64@
! 145: PACKAGE = @PACKAGE@
! 146: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 147: PACKAGE_NAME = @PACKAGE_NAME@
! 148: PACKAGE_STRING = @PACKAGE_STRING@
! 149: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 150: PACKAGE_URL = @PACKAGE_URL@
! 151: PACKAGE_VERSION = @PACKAGE_VERSION@
! 152: PATH_SEPARATOR = @PATH_SEPARATOR@
! 153: RANLIB = @RANLIB@
! 154: SED = @SED@
! 155: SET_MAKE = @SET_MAKE@
! 156: SHELL = @SHELL@
! 157: STRIP = @STRIP@
! 158: VERSION = @VERSION@
! 159: abs_builddir = @abs_builddir@
! 160: abs_srcdir = @abs_srcdir@
! 161: abs_top_builddir = @abs_top_builddir@
! 162: abs_top_srcdir = @abs_top_srcdir@
! 163: ac_ct_AR = @ac_ct_AR@
! 164: ac_ct_CC = @ac_ct_CC@
! 165: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
! 166: am__include = @am__include@
! 167: am__leading_dot = @am__leading_dot@
! 168: am__quote = @am__quote@
! 169: am__tar = @am__tar@
! 170: am__untar = @am__untar@
! 171: bindir = @bindir@
! 172: build = @build@
! 173: build_alias = @build_alias@
! 174: build_cpu = @build_cpu@
! 175: build_os = @build_os@
! 176: build_vendor = @build_vendor@
! 177: builddir = @builddir@
! 178: datadir = @datadir@
! 179: datarootdir = @datarootdir@
! 180: docdir = @docdir@
! 181: dvidir = @dvidir@
! 182: exec_prefix = @exec_prefix@
! 183: host = @host@
! 184: host_alias = @host_alias@
! 185: host_cpu = @host_cpu@
! 186: host_os = @host_os@
! 187: host_vendor = @host_vendor@
! 188: htmldir = @htmldir@
! 189: includedir = @includedir@
! 190: infodir = @infodir@
! 191: install_sh = @install_sh@
! 192: libdir = @libdir@
! 193: libexecdir = @libexecdir@
! 194: localedir = @localedir@
! 195: localstatedir = @localstatedir@
! 196: mandir = @mandir@
! 197: mkdir_p = @mkdir_p@
! 198: oldincludedir = @oldincludedir@
! 199: pdfdir = @pdfdir@
! 200: prefix = @prefix@
! 201: program_transform_name = @program_transform_name@
! 202: psdir = @psdir@
! 203: sbindir = @sbindir@
! 204: sharedstatedir = @sharedstatedir@
! 205: srcdir = @srcdir@
! 206: sysconfdir = @sysconfdir@
! 207: target = @target@
! 208: target_alias = @target_alias@
! 209: target_cpu = @target_cpu@
! 210: target_os = @target_os@
! 211: target_vendor = @target_vendor@
! 212: top_build_prefix = @top_build_prefix@
! 213: top_builddir = @top_builddir@
! 214: top_srcdir = @top_srcdir@
! 215: SUBDIRS = man3
! 216: all: all-recursive
! 217:
! 218: .SUFFIXES:
! 219: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
! 220: @for dep in $?; do \
! 221: case '$(am__configure_deps)' in \
! 222: *$$dep*) \
! 223: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 224: && { if test -f $@; then exit 0; else break; fi; }; \
! 225: exit 1;; \
! 226: esac; \
! 227: done; \
! 228: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/man/Makefile'; \
! 229: $(am__cd) $(top_srcdir) && \
! 230: $(AUTOMAKE) --gnu doc/man/Makefile
! 231: .PRECIOUS: Makefile
! 232: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 233: @case '$?' in \
! 234: *config.status*) \
! 235: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 236: *) \
! 237: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 238: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 239: esac;
! 240:
! 241: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 242: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 243:
! 244: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
! 245: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 246: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
! 247: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 248: $(am__aclocal_m4_deps):
! 249:
! 250: mostlyclean-libtool:
! 251: -rm -f *.lo
! 252:
! 253: clean-libtool:
! 254: -rm -rf .libs _libs
! 255:
! 256: # This directory's subdirectories are mostly independent; you can cd
! 257: # into them and run `make' without going through this Makefile.
! 258: # To change the values of `make' variables: instead of editing Makefiles,
! 259: # (1) if the variable is set in `config.status', edit `config.status'
! 260: # (which will cause the Makefiles to be regenerated when you run `make');
! 261: # (2) otherwise, pass the desired values on the `make' command line.
! 262: $(RECURSIVE_TARGETS):
! 263: @fail= failcom='exit 1'; \
! 264: for f in x $$MAKEFLAGS; do \
! 265: case $$f in \
! 266: *=* | --[!k]*);; \
! 267: *k*) failcom='fail=yes';; \
! 268: esac; \
! 269: done; \
! 270: dot_seen=no; \
! 271: target=`echo $@ | sed s/-recursive//`; \
! 272: list='$(SUBDIRS)'; for subdir in $$list; do \
! 273: echo "Making $$target in $$subdir"; \
! 274: if test "$$subdir" = "."; then \
! 275: dot_seen=yes; \
! 276: local_target="$$target-am"; \
! 277: else \
! 278: local_target="$$target"; \
! 279: fi; \
! 280: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 281: || eval $$failcom; \
! 282: done; \
! 283: if test "$$dot_seen" = "no"; then \
! 284: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
! 285: fi; test -z "$$fail"
! 286:
! 287: $(RECURSIVE_CLEAN_TARGETS):
! 288: @fail= failcom='exit 1'; \
! 289: for f in x $$MAKEFLAGS; do \
! 290: case $$f in \
! 291: *=* | --[!k]*);; \
! 292: *k*) failcom='fail=yes';; \
! 293: esac; \
! 294: done; \
! 295: dot_seen=no; \
! 296: case "$@" in \
! 297: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! 298: *) list='$(SUBDIRS)' ;; \
! 299: esac; \
! 300: rev=''; for subdir in $$list; do \
! 301: if test "$$subdir" = "."; then :; else \
! 302: rev="$$subdir $$rev"; \
! 303: fi; \
! 304: done; \
! 305: rev="$$rev ."; \
! 306: target=`echo $@ | sed s/-recursive//`; \
! 307: for subdir in $$rev; do \
! 308: echo "Making $$target in $$subdir"; \
! 309: if test "$$subdir" = "."; then \
! 310: local_target="$$target-am"; \
! 311: else \
! 312: local_target="$$target"; \
! 313: fi; \
! 314: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 315: || eval $$failcom; \
! 316: done && test -z "$$fail"
! 317: tags-recursive:
! 318: list='$(SUBDIRS)'; for subdir in $$list; do \
! 319: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
! 320: done
! 321: ctags-recursive:
! 322: list='$(SUBDIRS)'; for subdir in $$list; do \
! 323: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
! 324: done
! 325:
! 326: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
! 327: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 328: unique=`for i in $$list; do \
! 329: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 330: done | \
! 331: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 332: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 333: mkid -fID $$unique
! 334: tags: TAGS
! 335:
! 336: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! 337: $(TAGS_FILES) $(LISP)
! 338: set x; \
! 339: here=`pwd`; \
! 340: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
! 341: include_option=--etags-include; \
! 342: empty_fix=.; \
! 343: else \
! 344: include_option=--include; \
! 345: empty_fix=; \
! 346: fi; \
! 347: list='$(SUBDIRS)'; for subdir in $$list; do \
! 348: if test "$$subdir" = .; then :; else \
! 349: test ! -f $$subdir/TAGS || \
! 350: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
! 351: fi; \
! 352: done; \
! 353: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 354: unique=`for i in $$list; do \
! 355: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 356: done | \
! 357: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 358: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 359: shift; \
! 360: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
! 361: test -n "$$unique" || unique=$$empty_fix; \
! 362: if test $$# -gt 0; then \
! 363: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 364: "$$@" $$unique; \
! 365: else \
! 366: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 367: $$unique; \
! 368: fi; \
! 369: fi
! 370: ctags: CTAGS
! 371: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! 372: $(TAGS_FILES) $(LISP)
! 373: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 374: unique=`for i in $$list; do \
! 375: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 376: done | \
! 377: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 378: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 379: test -z "$(CTAGS_ARGS)$$unique" \
! 380: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
! 381: $$unique
! 382:
! 383: GTAGS:
! 384: here=`$(am__cd) $(top_builddir) && pwd` \
! 385: && $(am__cd) $(top_srcdir) \
! 386: && gtags -i $(GTAGS_ARGS) "$$here"
! 387:
! 388: distclean-tags:
! 389: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
! 390:
! 391: distdir: $(DISTFILES)
! 392: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 393: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 394: list='$(DISTFILES)'; \
! 395: dist_files=`for file in $$list; do echo $$file; done | \
! 396: sed -e "s|^$$srcdirstrip/||;t" \
! 397: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 398: case $$dist_files in \
! 399: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 400: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 401: sort -u` ;; \
! 402: esac; \
! 403: for file in $$dist_files; do \
! 404: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 405: if test -d $$d/$$file; then \
! 406: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 407: if test -d "$(distdir)/$$file"; then \
! 408: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 409: fi; \
! 410: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 411: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 412: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 413: fi; \
! 414: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 415: else \
! 416: test -f "$(distdir)/$$file" \
! 417: || cp -p $$d/$$file "$(distdir)/$$file" \
! 418: || exit 1; \
! 419: fi; \
! 420: done
! 421: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 422: if test "$$subdir" = .; then :; else \
! 423: test -d "$(distdir)/$$subdir" \
! 424: || $(MKDIR_P) "$(distdir)/$$subdir" \
! 425: || exit 1; \
! 426: fi; \
! 427: done
! 428: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 429: if test "$$subdir" = .; then :; else \
! 430: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
! 431: $(am__relativize); \
! 432: new_distdir=$$reldir; \
! 433: dir1=$$subdir; dir2="$(top_distdir)"; \
! 434: $(am__relativize); \
! 435: new_top_distdir=$$reldir; \
! 436: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
! 437: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
! 438: ($(am__cd) $$subdir && \
! 439: $(MAKE) $(AM_MAKEFLAGS) \
! 440: top_distdir="$$new_top_distdir" \
! 441: distdir="$$new_distdir" \
! 442: am__remove_distdir=: \
! 443: am__skip_length_check=: \
! 444: am__skip_mode_fix=: \
! 445: distdir) \
! 446: || exit 1; \
! 447: fi; \
! 448: done
! 449: check-am: all-am
! 450: check: check-recursive
! 451: all-am: Makefile
! 452: installdirs: installdirs-recursive
! 453: installdirs-am:
! 454: install: install-recursive
! 455: install-exec: install-exec-recursive
! 456: install-data: install-data-recursive
! 457: uninstall: uninstall-recursive
! 458:
! 459: install-am: all-am
! 460: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 461:
! 462: installcheck: installcheck-recursive
! 463: install-strip:
! 464: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 465: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 466: `test -z '$(STRIP)' || \
! 467: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
! 468: mostlyclean-generic:
! 469:
! 470: clean-generic:
! 471:
! 472: distclean-generic:
! 473: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 474: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
! 475:
! 476: maintainer-clean-generic:
! 477: @echo "This command is intended for maintainers to use"
! 478: @echo "it deletes files that may require special tools to rebuild."
! 479: clean: clean-recursive
! 480:
! 481: clean-am: clean-generic clean-libtool mostlyclean-am
! 482:
! 483: distclean: distclean-recursive
! 484: -rm -f Makefile
! 485: distclean-am: clean-am distclean-generic distclean-tags
! 486:
! 487: dvi: dvi-recursive
! 488:
! 489: dvi-am:
! 490:
! 491: html: html-recursive
! 492:
! 493: html-am:
! 494:
! 495: info: info-recursive
! 496:
! 497: info-am:
! 498:
! 499: install-data-am:
! 500:
! 501: install-dvi: install-dvi-recursive
! 502:
! 503: install-dvi-am:
! 504:
! 505: install-exec-am:
! 506:
! 507: install-html: install-html-recursive
! 508:
! 509: install-html-am:
! 510:
! 511: install-info: install-info-recursive
! 512:
! 513: install-info-am:
! 514:
! 515: install-man:
! 516:
! 517: install-pdf: install-pdf-recursive
! 518:
! 519: install-pdf-am:
! 520:
! 521: install-ps: install-ps-recursive
! 522:
! 523: install-ps-am:
! 524:
! 525: installcheck-am:
! 526:
! 527: maintainer-clean: maintainer-clean-recursive
! 528: -rm -f Makefile
! 529: maintainer-clean-am: distclean-am maintainer-clean-generic
! 530:
! 531: mostlyclean: mostlyclean-recursive
! 532:
! 533: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 534:
! 535: pdf: pdf-recursive
! 536:
! 537: pdf-am:
! 538:
! 539: ps: ps-recursive
! 540:
! 541: ps-am:
! 542:
! 543: uninstall-am:
! 544:
! 545: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
! 546: install-am install-strip tags-recursive
! 547:
! 548: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
! 549: all all-am check check-am clean clean-generic clean-libtool \
! 550: ctags ctags-recursive distclean distclean-generic \
! 551: distclean-libtool distclean-tags distdir dvi dvi-am html \
! 552: html-am info info-am install install-am install-data \
! 553: install-data-am install-dvi install-dvi-am install-exec \
! 554: install-exec-am install-html install-html-am install-info \
! 555: install-info-am install-man install-pdf install-pdf-am \
! 556: install-ps install-ps-am install-strip installcheck \
! 557: installcheck-am installdirs installdirs-am maintainer-clean \
! 558: maintainer-clean-generic mostlyclean mostlyclean-generic \
! 559: mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
! 560: uninstall uninstall-am
! 561:
! 562:
! 563: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 564: # Otherwise a system limit (for SysV at least) may be exceeded.
! 565: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>