Annotation of embedaddon/libnet/doc/man/man3/Makefile.in, revision 1.1.1.1
1.1 misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6: # Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
18: pkgdatadir = $(datadir)/@PACKAGE@
19: pkgincludedir = $(includedir)/@PACKAGE@
20: pkglibdir = $(libdir)/@PACKAGE@
21: pkglibexecdir = $(libexecdir)/@PACKAGE@
22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23: install_sh_DATA = $(install_sh) -c -m 644
24: install_sh_PROGRAM = $(install_sh) -c
25: install_sh_SCRIPT = $(install_sh) -c
26: INSTALL_HEADER = $(INSTALL_DATA)
27: transform = $(program_transform_name)
28: NORMAL_INSTALL = :
29: PRE_INSTALL = :
30: POST_INSTALL = :
31: NORMAL_UNINSTALL = :
32: PRE_UNINSTALL = :
33: POST_UNINSTALL = :
34: build_triplet = @build@
35: host_triplet = @host@
36: target_triplet = @target@
37: subdir = doc/man/man3
38: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
39: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
40: am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
41: $(top_srcdir)/configure.in
42: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
43: $(ACLOCAL_M4)
44: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
45: CONFIG_HEADER = $(top_builddir)/include/config.h
46: CONFIG_CLEAN_FILES =
47: CONFIG_CLEAN_VPATH_FILES =
48: SOURCES =
49: DIST_SOURCES =
50: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
51: am__vpath_adj = case $$p in \
52: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
53: *) f=$$p;; \
54: esac;
55: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
56: am__install_max = 40
57: am__nobase_strip_setup = \
58: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
59: am__nobase_strip = \
60: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
61: am__nobase_list = $(am__nobase_strip_setup); \
62: for p in $$list; do echo "$$p $$p"; done | \
63: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
64: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
65: if (++n[$$2] == $(am__install_max)) \
66: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
67: END { for (dir in files) print dir, files[dir] }'
68: am__base_list = \
69: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
70: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
71: man3dir = $(mandir)/man3
72: am__installdirs = "$(DESTDIR)$(man3dir)"
73: NROFF = nroff
74: MANS = $(man3_MANS)
75: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
76: ACLOCAL = @ACLOCAL@
77: ADDITIONAL_LIBS = @ADDITIONAL_LIBS@
78: AMTAR = @AMTAR@
79: AR = @AR@
80: AUTOCONF = @AUTOCONF@
81: AUTOHEADER = @AUTOHEADER@
82: AUTOMAKE = @AUTOMAKE@
83: AWK = @AWK@
84: CC = @CC@
85: CCDEPMODE = @CCDEPMODE@
86: CFLAGS = @CFLAGS@
87: CPP = @CPP@
88: CPPFLAGS = @CPPFLAGS@
89: CYGPATH_W = @CYGPATH_W@
90: DEFS = @DEFS@
91: DEPDIR = @DEPDIR@
92: DLLTOOL = @DLLTOOL@
93: DSYMUTIL = @DSYMUTIL@
94: DUMPBIN = @DUMPBIN@
95: ECHO_C = @ECHO_C@
96: ECHO_N = @ECHO_N@
97: ECHO_T = @ECHO_T@
98: EGREP = @EGREP@
99: ENDIANESS = @ENDIANESS@
100: EXEEXT = @EXEEXT@
101: FGREP = @FGREP@
102: GREP = @GREP@
103: HAVE_PACKET_SOCKET = @HAVE_PACKET_SOCKET@
104: INSTALL = @INSTALL@
105: INSTALL_DATA = @INSTALL_DATA@
106: INSTALL_PROGRAM = @INSTALL_PROGRAM@
107: INSTALL_SCRIPT = @INSTALL_SCRIPT@
108: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
109: LD = @LD@
110: LDFLAGS = @LDFLAGS@
111: LIBNET_CONFIG_CFLAGS = @LIBNET_CONFIG_CFLAGS@
112: LIBNET_CONFIG_DEFINES = @LIBNET_CONFIG_DEFINES@
113: LIBNET_CONFIG_LIBS = @LIBNET_CONFIG_LIBS@
114: LIBOBJS = @LIBOBJS@
115: LIBS = @LIBS@
116: LIBTOOL = @LIBTOOL@
117: LIPO = @LIPO@
118: LN_S = @LN_S@
119: LTLIBOBJS = @LTLIBOBJS@
120: MAINT = @MAINT@
121: MAKEINFO = @MAKEINFO@
122: MANIFEST_TOOL = @MANIFEST_TOOL@
123: MKDIR_P = @MKDIR_P@
124: NM = @NM@
125: NMEDIT = @NMEDIT@
126: OBJDUMP = @OBJDUMP@
127: OBJEXT = @OBJEXT@
128: OTOOL = @OTOOL@
129: OTOOL64 = @OTOOL64@
130: PACKAGE = @PACKAGE@
131: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
132: PACKAGE_NAME = @PACKAGE_NAME@
133: PACKAGE_STRING = @PACKAGE_STRING@
134: PACKAGE_TARNAME = @PACKAGE_TARNAME@
135: PACKAGE_URL = @PACKAGE_URL@
136: PACKAGE_VERSION = @PACKAGE_VERSION@
137: PATH_SEPARATOR = @PATH_SEPARATOR@
138: RANLIB = @RANLIB@
139: SED = @SED@
140: SET_MAKE = @SET_MAKE@
141: SHELL = @SHELL@
142: STRIP = @STRIP@
143: VERSION = @VERSION@
144: abs_builddir = @abs_builddir@
145: abs_srcdir = @abs_srcdir@
146: abs_top_builddir = @abs_top_builddir@
147: abs_top_srcdir = @abs_top_srcdir@
148: ac_ct_AR = @ac_ct_AR@
149: ac_ct_CC = @ac_ct_CC@
150: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
151: am__include = @am__include@
152: am__leading_dot = @am__leading_dot@
153: am__quote = @am__quote@
154: am__tar = @am__tar@
155: am__untar = @am__untar@
156: bindir = @bindir@
157: build = @build@
158: build_alias = @build_alias@
159: build_cpu = @build_cpu@
160: build_os = @build_os@
161: build_vendor = @build_vendor@
162: builddir = @builddir@
163: datadir = @datadir@
164: datarootdir = @datarootdir@
165: docdir = @docdir@
166: dvidir = @dvidir@
167: exec_prefix = @exec_prefix@
168: host = @host@
169: host_alias = @host_alias@
170: host_cpu = @host_cpu@
171: host_os = @host_os@
172: host_vendor = @host_vendor@
173: htmldir = @htmldir@
174: includedir = @includedir@
175: infodir = @infodir@
176: install_sh = @install_sh@
177: libdir = @libdir@
178: libexecdir = @libexecdir@
179: localedir = @localedir@
180: localstatedir = @localstatedir@
181: mandir = @mandir@
182: mkdir_p = @mkdir_p@
183: oldincludedir = @oldincludedir@
184: pdfdir = @pdfdir@
185: prefix = @prefix@
186: program_transform_name = @program_transform_name@
187: psdir = @psdir@
188: sbindir = @sbindir@
189: sharedstatedir = @sharedstatedir@
190: srcdir = @srcdir@
191: sysconfdir = @sysconfdir@
192: target = @target@
193: target_alias = @target_alias@
194: target_cpu = @target_cpu@
195: target_os = @target_os@
196: target_vendor = @target_vendor@
197: top_build_prefix = @top_build_prefix@
198: top_builddir = @top_builddir@
199: top_srcdir = @top_srcdir@
200: man3_MANS = $(srcdir)/*.3
201: EXTRA_DIST = $(srcdir)/*.3
202: all: all-am
203:
204: .SUFFIXES:
205: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
206: @for dep in $?; do \
207: case '$(am__configure_deps)' in \
208: *$$dep*) \
209: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
210: && { if test -f $@; then exit 0; else break; fi; }; \
211: exit 1;; \
212: esac; \
213: done; \
214: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/man/man3/Makefile'; \
215: $(am__cd) $(top_srcdir) && \
216: $(AUTOMAKE) --gnu doc/man/man3/Makefile
217: .PRECIOUS: Makefile
218: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
219: @case '$?' in \
220: *config.status*) \
221: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
222: *) \
223: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
224: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
225: esac;
226:
227: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
228: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
229:
230: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
231: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
232: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
233: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
234: $(am__aclocal_m4_deps):
235:
236: mostlyclean-libtool:
237: -rm -f *.lo
238:
239: clean-libtool:
240: -rm -rf .libs _libs
241: install-man3: $(man3_MANS)
242: @$(NORMAL_INSTALL)
243: test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
244: @list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \
245: { for i in $$list; do echo "$$i"; done; \
246: } | while read p; do \
247: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
248: echo "$$d$$p"; echo "$$p"; \
249: done | \
250: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
251: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
252: sed 'N;N;s,\n, ,g' | { \
253: list=; while read file base inst; do \
254: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
255: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
256: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
257: fi; \
258: done; \
259: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
260: while read files; do \
261: test -z "$$files" || { \
262: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
263: $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
264: done; }
265:
266: uninstall-man3:
267: @$(NORMAL_UNINSTALL)
268: @list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \
269: files=`{ for i in $$list; do echo "$$i"; done; \
270: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
271: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
272: test -z "$$files" || { \
273: echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \
274: cd "$(DESTDIR)$(man3dir)" && rm -f $$files; }
275: tags: TAGS
276: TAGS:
277:
278: ctags: CTAGS
279: CTAGS:
280:
281:
282: distdir: $(DISTFILES)
283: @list='$(MANS)'; if test -n "$$list"; then \
284: list=`for p in $$list; do \
285: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
286: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
287: if test -n "$$list" && \
288: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
289: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
290: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
291: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
292: echo " typically \`make maintainer-clean' will remove them" >&2; \
293: exit 1; \
294: else :; fi; \
295: else :; fi
296: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
297: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
298: list='$(DISTFILES)'; \
299: dist_files=`for file in $$list; do echo $$file; done | \
300: sed -e "s|^$$srcdirstrip/||;t" \
301: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
302: case $$dist_files in \
303: */*) $(MKDIR_P) `echo "$$dist_files" | \
304: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
305: sort -u` ;; \
306: esac; \
307: for file in $$dist_files; do \
308: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
309: if test -d $$d/$$file; then \
310: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
311: if test -d "$(distdir)/$$file"; then \
312: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
313: fi; \
314: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
315: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
316: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
317: fi; \
318: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
319: else \
320: test -f "$(distdir)/$$file" \
321: || cp -p $$d/$$file "$(distdir)/$$file" \
322: || exit 1; \
323: fi; \
324: done
325: check-am: all-am
326: check: check-am
327: all-am: Makefile $(MANS)
328: installdirs:
329: for dir in "$(DESTDIR)$(man3dir)"; do \
330: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
331: done
332: install: install-am
333: install-exec: install-exec-am
334: install-data: install-data-am
335: uninstall: uninstall-am
336:
337: install-am: all-am
338: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
339:
340: installcheck: installcheck-am
341: install-strip:
342: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
343: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
344: `test -z '$(STRIP)' || \
345: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
346: mostlyclean-generic:
347:
348: clean-generic:
349:
350: distclean-generic:
351: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
352: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
353:
354: maintainer-clean-generic:
355: @echo "This command is intended for maintainers to use"
356: @echo "it deletes files that may require special tools to rebuild."
357: clean: clean-am
358:
359: clean-am: clean-generic clean-libtool mostlyclean-am
360:
361: distclean: distclean-am
362: -rm -f Makefile
363: distclean-am: clean-am distclean-generic
364:
365: dvi: dvi-am
366:
367: dvi-am:
368:
369: html: html-am
370:
371: html-am:
372:
373: info: info-am
374:
375: info-am:
376:
377: install-data-am: install-man
378:
379: install-dvi: install-dvi-am
380:
381: install-dvi-am:
382:
383: install-exec-am:
384:
385: install-html: install-html-am
386:
387: install-html-am:
388:
389: install-info: install-info-am
390:
391: install-info-am:
392:
393: install-man: install-man3
394:
395: install-pdf: install-pdf-am
396:
397: install-pdf-am:
398:
399: install-ps: install-ps-am
400:
401: install-ps-am:
402:
403: installcheck-am:
404:
405: maintainer-clean: maintainer-clean-am
406: -rm -f Makefile
407: maintainer-clean-am: distclean-am maintainer-clean-generic
408:
409: mostlyclean: mostlyclean-am
410:
411: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
412:
413: pdf: pdf-am
414:
415: pdf-am:
416:
417: ps: ps-am
418:
419: ps-am:
420:
421: uninstall-am: uninstall-man
422:
423: uninstall-man: uninstall-man3
424:
425: .MAKE: install-am install-strip
426:
427: .PHONY: all all-am check check-am clean clean-generic clean-libtool \
428: distclean distclean-generic distclean-libtool distdir dvi \
429: dvi-am html html-am info info-am install install-am \
430: install-data install-data-am install-dvi install-dvi-am \
431: install-exec install-exec-am install-html install-html-am \
432: install-info install-info-am install-man install-man3 \
433: install-pdf install-pdf-am install-ps install-ps-am \
434: install-strip installcheck installcheck-am installdirs \
435: maintainer-clean maintainer-clean-generic mostlyclean \
436: mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
437: uninstall uninstall-am uninstall-man uninstall-man3
438:
439:
440: # Tell versions [3.59,3.63) of GNU make to not export all variables.
441: # Otherwise a system limit (for SysV at least) may be exceeded.
442: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / libnet / doc / man / man3