Annotation of embedaddon/libnet/include/Makefile.in, revision 1.1.1.2
1.1.1.2 ! misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
1.1 misho 2: # @configure_input@
3:
1.1.1.2 ! misho 4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
! 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
! 6: # Inc.
1.1 misho 7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17:
1.1.1.2 ! misho 18: # $Id: Makefile.am,v 1.1.1.1 2003/06/26 21:55:10 route Exp $
1.1 misho 19:
1.1.1.2 ! misho 20: # $Id: Makefile.am.common,v 1.3 2004/01/03 20:31:00 mike Exp $
1.1 misho 21: #
22: # Libnet automake information file
23: # Copyright (c) 1998 - 2004 Mike D. Schiffman <mike@infonexus.com>
24: # All rights reserved.
25: #
26:
27: VPATH = @srcdir@
28: pkgdatadir = $(datadir)/@PACKAGE@
29: pkgincludedir = $(includedir)/@PACKAGE@
1.1.1.2 ! misho 30: pkglibdir = $(libdir)/@PACKAGE@
! 31: pkglibexecdir = $(libexecdir)/@PACKAGE@
1.1 misho 32: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
33: install_sh_DATA = $(install_sh) -c -m 644
34: install_sh_PROGRAM = $(install_sh) -c
35: install_sh_SCRIPT = $(install_sh) -c
36: INSTALL_HEADER = $(INSTALL_DATA)
1.1.1.2 ! misho 37: transform = $(program_transform_name)
1.1 misho 38: NORMAL_INSTALL = :
39: PRE_INSTALL = :
40: POST_INSTALL = :
41: NORMAL_UNINSTALL = :
42: PRE_UNINSTALL = :
43: POST_UNINSTALL = :
44: build_triplet = @build@
45: host_triplet = @host@
46: target_triplet = @target@
1.1.1.2 ! misho 47: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
! 48: $(srcdir)/config.h.in $(srcdir)/libnet.h.in \
! 49: $(top_srcdir)/Makefile.am.common
! 50: subdir = include
! 51: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 52: am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
! 53: $(top_srcdir)/configure.in
! 54: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 55: $(ACLOCAL_M4)
! 56: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
! 57: CONFIG_HEADER = config.h
! 58: CONFIG_CLEAN_FILES = libnet.h
! 59: CONFIG_CLEAN_VPATH_FILES =
! 60: depcomp =
! 61: am__depfiles_maybe =
! 62: SOURCES =
! 63: DIST_SOURCES =
! 64: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
! 65: html-recursive info-recursive install-data-recursive \
! 66: install-dvi-recursive install-exec-recursive \
! 67: install-html-recursive install-info-recursive \
! 68: install-pdf-recursive install-ps-recursive install-recursive \
! 69: installcheck-recursive installdirs-recursive pdf-recursive \
! 70: ps-recursive uninstall-recursive
! 71: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
! 72: am__vpath_adj = case $$p in \
! 73: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
! 74: *) f=$$p;; \
! 75: esac;
! 76: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
! 77: am__install_max = 40
! 78: am__nobase_strip_setup = \
! 79: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
! 80: am__nobase_strip = \
! 81: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
! 82: am__nobase_list = $(am__nobase_strip_setup); \
! 83: for p in $$list; do echo "$$p $$p"; done | \
! 84: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
! 85: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
! 86: if (++n[$$2] == $(am__install_max)) \
! 87: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
! 88: END { for (dir in files) print dir, files[dir] }'
! 89: am__base_list = \
! 90: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
! 91: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
! 92: am__installdirs = "$(DESTDIR)$(includedir)"
! 93: HEADERS = $(nodist_include_HEADERS)
! 94: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
! 95: distclean-recursive maintainer-clean-recursive
! 96: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
! 97: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
! 98: distdir
! 99: ETAGS = etags
! 100: CTAGS = ctags
! 101: DIST_SUBDIRS = $(SUBDIRS)
! 102: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 103: am__relativize = \
! 104: dir0=`pwd`; \
! 105: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
! 106: sed_rest='s,^[^/]*/*,,'; \
! 107: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
! 108: sed_butlast='s,/*[^/]*$$,,'; \
! 109: while test -n "$$dir1"; do \
! 110: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
! 111: if test "$$first" != "."; then \
! 112: if test "$$first" = ".."; then \
! 113: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
! 114: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
! 115: else \
! 116: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
! 117: if test "$$first2" = "$$first"; then \
! 118: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
! 119: else \
! 120: dir2="../$$dir2"; \
! 121: fi; \
! 122: dir0="$$dir0"/"$$first"; \
! 123: fi; \
! 124: fi; \
! 125: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
! 126: done; \
! 127: reldir="$$dir2"
! 128: ACLOCAL = @ACLOCAL@
1.1 misho 129: ADDITIONAL_LIBS = @ADDITIONAL_LIBS@
130: AMTAR = @AMTAR@
1.1.1.2 ! misho 131: AR = @AR@
! 132: AUTOCONF = @AUTOCONF@
! 133: AUTOHEADER = @AUTOHEADER@
! 134: AUTOMAKE = @AUTOMAKE@
1.1 misho 135: AWK = @AWK@
136: CC = @CC@
1.1.1.2 ! misho 137: CCDEPMODE = @CCDEPMODE@
! 138: CFLAGS = @CFLAGS@
! 139: CPP = @CPP@
! 140: CPPFLAGS = @CPPFLAGS@
! 141: CYGPATH_W = @CYGPATH_W@
! 142: DEFS = @DEFS@
1.1 misho 143: DEPDIR = @DEPDIR@
1.1.1.2 ! misho 144: DLLTOOL = @DLLTOOL@
! 145: DSYMUTIL = @DSYMUTIL@
! 146: DUMPBIN = @DUMPBIN@
! 147: ECHO_C = @ECHO_C@
! 148: ECHO_N = @ECHO_N@
! 149: ECHO_T = @ECHO_T@
! 150: EGREP = @EGREP@
1.1 misho 151: ENDIANESS = @ENDIANESS@
1.1.1.2 ! misho 152: EXEEXT = @EXEEXT@
! 153: FGREP = @FGREP@
! 154: GREP = @GREP@
1.1 misho 155: HAVE_PACKET_SOCKET = @HAVE_PACKET_SOCKET@
1.1.1.2 ! misho 156: INSTALL = @INSTALL@
! 157: INSTALL_DATA = @INSTALL_DATA@
! 158: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 159: INSTALL_SCRIPT = @INSTALL_SCRIPT@
1.1 misho 160: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
1.1.1.2 ! misho 161: LD = @LD@
! 162: LDFLAGS = @LDFLAGS@
1.1 misho 163: LIBNET_CONFIG_CFLAGS = @LIBNET_CONFIG_CFLAGS@
164: LIBNET_CONFIG_DEFINES = @LIBNET_CONFIG_DEFINES@
165: LIBNET_CONFIG_LIBS = @LIBNET_CONFIG_LIBS@
1.1.1.2 ! misho 166: LIBOBJS = @LIBOBJS@
! 167: LIBS = @LIBS@
! 168: LIBTOOL = @LIBTOOL@
! 169: LIPO = @LIPO@
! 170: LN_S = @LN_S@
! 171: LTLIBOBJS = @LTLIBOBJS@
1.1 misho 172: MAINT = @MAINT@
1.1.1.2 ! misho 173: MAKEINFO = @MAKEINFO@
! 174: MANIFEST_TOOL = @MANIFEST_TOOL@
! 175: MKDIR_P = @MKDIR_P@
! 176: NM = @NM@
! 177: NMEDIT = @NMEDIT@
! 178: OBJDUMP = @OBJDUMP@
! 179: OBJEXT = @OBJEXT@
! 180: OTOOL = @OTOOL@
! 181: OTOOL64 = @OTOOL64@
1.1 misho 182: PACKAGE = @PACKAGE@
1.1.1.2 ! misho 183: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 184: PACKAGE_NAME = @PACKAGE_NAME@
! 185: PACKAGE_STRING = @PACKAGE_STRING@
! 186: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 187: PACKAGE_URL = @PACKAGE_URL@
! 188: PACKAGE_VERSION = @PACKAGE_VERSION@
! 189: PATH_SEPARATOR = @PATH_SEPARATOR@
1.1 misho 190: RANLIB = @RANLIB@
1.1.1.2 ! misho 191: SED = @SED@
! 192: SET_MAKE = @SET_MAKE@
! 193: SHELL = @SHELL@
1.1 misho 194: STRIP = @STRIP@
195: VERSION = @VERSION@
1.1.1.2 ! misho 196: abs_builddir = @abs_builddir@
! 197: abs_srcdir = @abs_srcdir@
! 198: abs_top_builddir = @abs_top_builddir@
! 199: abs_top_srcdir = @abs_top_srcdir@
! 200: ac_ct_AR = @ac_ct_AR@
! 201: ac_ct_CC = @ac_ct_CC@
! 202: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
1.1 misho 203: am__include = @am__include@
1.1.1.2 ! misho 204: am__leading_dot = @am__leading_dot@
1.1 misho 205: am__quote = @am__quote@
1.1.1.2 ! misho 206: am__tar = @am__tar@
! 207: am__untar = @am__untar@
! 208: bindir = @bindir@
! 209: build = @build@
! 210: build_alias = @build_alias@
! 211: build_cpu = @build_cpu@
! 212: build_os = @build_os@
! 213: build_vendor = @build_vendor@
! 214: builddir = @builddir@
! 215: datadir = @datadir@
! 216: datarootdir = @datarootdir@
! 217: docdir = @docdir@
! 218: dvidir = @dvidir@
! 219: exec_prefix = @exec_prefix@
! 220: host = @host@
! 221: host_alias = @host_alias@
! 222: host_cpu = @host_cpu@
! 223: host_os = @host_os@
! 224: host_vendor = @host_vendor@
! 225: htmldir = @htmldir@
! 226: includedir = @includedir@
! 227: infodir = @infodir@
1.1 misho 228: install_sh = @install_sh@
1.1.1.2 ! misho 229: libdir = @libdir@
! 230: libexecdir = @libexecdir@
! 231: localedir = @localedir@
! 232: localstatedir = @localstatedir@
! 233: mandir = @mandir@
! 234: mkdir_p = @mkdir_p@
! 235: oldincludedir = @oldincludedir@
! 236: pdfdir = @pdfdir@
! 237: prefix = @prefix@
! 238: program_transform_name = @program_transform_name@
! 239: psdir = @psdir@
! 240: sbindir = @sbindir@
! 241: sharedstatedir = @sharedstatedir@
! 242: srcdir = @srcdir@
! 243: sysconfdir = @sysconfdir@
! 244: target = @target@
! 245: target_alias = @target_alias@
! 246: target_cpu = @target_cpu@
! 247: target_os = @target_os@
! 248: target_vendor = @target_vendor@
! 249: top_build_prefix = @top_build_prefix@
! 250: top_builddir = @top_builddir@
! 251: top_srcdir = @top_srcdir@
1.1 misho 252: AUTOMAKE_OPTIONS = foreign no-dependencies
253: DISTCLEANFILES = *~
1.1.1.2 ! misho 254: ACLOCAL_AMFLAGS = -I m4
! 255: INCLUDES = -I$(top_srcdir)/include
! 256: nodist_include_HEADERS = libnet.h
! 257: EXTRA_DIST = bpf.h gnuc.h ifaddrlist.h
! 258: SUBDIRS = libnet win32
1.1 misho 259: all: config.h
260: $(MAKE) $(AM_MAKEFLAGS) all-recursive
261:
262: .SUFFIXES:
1.1.1.2 ! misho 263: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.common $(am__configure_deps)
! 264: @for dep in $?; do \
! 265: case '$(am__configure_deps)' in \
! 266: *$$dep*) \
! 267: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 268: && { if test -f $@; then exit 0; else break; fi; }; \
! 269: exit 1;; \
! 270: esac; \
! 271: done; \
! 272: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \
! 273: $(am__cd) $(top_srcdir) && \
! 274: $(AUTOMAKE) --foreign include/Makefile
! 275: .PRECIOUS: Makefile
! 276: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 277: @case '$?' in \
! 278: *config.status*) \
! 279: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 280: *) \
! 281: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 282: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 283: esac;
! 284:
! 285: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 286: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 287:
! 288: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
! 289: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 290: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
! 291: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 292: $(am__aclocal_m4_deps):
1.1 misho 293:
294: config.h: stamp-h1
295: @if test ! -f $@; then \
296: rm -f stamp-h1; \
1.1.1.2 ! misho 297: $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
1.1 misho 298: else :; fi
299:
300: stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
301: @rm -f stamp-h1
302: cd $(top_builddir) && $(SHELL) ./config.status include/config.h
1.1.1.2 ! misho 303: $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
! 304: ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
! 305: rm -f stamp-h1
! 306: touch $@
1.1 misho 307:
308: distclean-hdr:
309: -rm -f config.h stamp-h1
1.1.1.2 ! misho 310: libnet.h: $(top_builddir)/config.status $(srcdir)/libnet.h.in
1.1 misho 311: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
1.1.1.2 ! misho 312:
! 313: mostlyclean-libtool:
! 314: -rm -f *.lo
! 315:
! 316: clean-libtool:
! 317: -rm -rf .libs _libs
! 318: install-nodist_includeHEADERS: $(nodist_include_HEADERS)
1.1 misho 319: @$(NORMAL_INSTALL)
1.1.1.2 ! misho 320: test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
! 321: @list='$(nodist_include_HEADERS)'; test -n "$(includedir)" || list=; \
! 322: for p in $$list; do \
1.1 misho 323: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
1.1.1.2 ! misho 324: echo "$$d$$p"; \
! 325: done | $(am__base_list) | \
! 326: while read files; do \
! 327: echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
! 328: $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
1.1 misho 329: done
330:
1.1.1.2 ! misho 331: uninstall-nodist_includeHEADERS:
1.1 misho 332: @$(NORMAL_UNINSTALL)
1.1.1.2 ! misho 333: @list='$(nodist_include_HEADERS)'; test -n "$(includedir)" || list=; \
! 334: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
! 335: test -n "$$files" || exit 0; \
! 336: echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
! 337: cd "$(DESTDIR)$(includedir)" && rm -f $$files
1.1 misho 338:
339: # This directory's subdirectories are mostly independent; you can cd
340: # into them and run `make' without going through this Makefile.
341: # To change the values of `make' variables: instead of editing Makefiles,
342: # (1) if the variable is set in `config.status', edit `config.status'
343: # (which will cause the Makefiles to be regenerated when you run `make');
344: # (2) otherwise, pass the desired values on the `make' command line.
345: $(RECURSIVE_TARGETS):
1.1.1.2 ! misho 346: @fail= failcom='exit 1'; \
! 347: for f in x $$MAKEFLAGS; do \
! 348: case $$f in \
! 349: *=* | --[!k]*);; \
! 350: *k*) failcom='fail=yes';; \
! 351: esac; \
! 352: done; \
1.1 misho 353: dot_seen=no; \
354: target=`echo $@ | sed s/-recursive//`; \
355: list='$(SUBDIRS)'; for subdir in $$list; do \
356: echo "Making $$target in $$subdir"; \
357: if test "$$subdir" = "."; then \
358: dot_seen=yes; \
359: local_target="$$target-am"; \
360: else \
361: local_target="$$target"; \
362: fi; \
1.1.1.2 ! misho 363: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 364: || eval $$failcom; \
1.1 misho 365: done; \
366: if test "$$dot_seen" = "no"; then \
367: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
368: fi; test -z "$$fail"
369:
1.1.1.2 ! misho 370: $(RECURSIVE_CLEAN_TARGETS):
! 371: @fail= failcom='exit 1'; \
! 372: for f in x $$MAKEFLAGS; do \
! 373: case $$f in \
! 374: *=* | --[!k]*);; \
! 375: *k*) failcom='fail=yes';; \
! 376: esac; \
! 377: done; \
1.1 misho 378: dot_seen=no; \
379: case "$@" in \
380: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
381: *) list='$(SUBDIRS)' ;; \
382: esac; \
383: rev=''; for subdir in $$list; do \
384: if test "$$subdir" = "."; then :; else \
385: rev="$$subdir $$rev"; \
386: fi; \
387: done; \
388: rev="$$rev ."; \
389: target=`echo $@ | sed s/-recursive//`; \
390: for subdir in $$rev; do \
391: echo "Making $$target in $$subdir"; \
392: if test "$$subdir" = "."; then \
393: local_target="$$target-am"; \
394: else \
395: local_target="$$target"; \
396: fi; \
1.1.1.2 ! misho 397: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 398: || eval $$failcom; \
1.1 misho 399: done && test -z "$$fail"
400: tags-recursive:
401: list='$(SUBDIRS)'; for subdir in $$list; do \
1.1.1.2 ! misho 402: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
! 403: done
! 404: ctags-recursive:
! 405: list='$(SUBDIRS)'; for subdir in $$list; do \
! 406: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
1.1 misho 407: done
408:
409: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
410: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
411: unique=`for i in $$list; do \
412: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
413: done | \
1.1.1.2 ! misho 414: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 415: END { if (nonempty) { for (i in files) print i; }; }'`; \
1.1 misho 416: mkid -fID $$unique
1.1.1.2 ! misho 417: tags: TAGS
1.1 misho 418:
419: TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
420: $(TAGS_FILES) $(LISP)
1.1.1.2 ! misho 421: set x; \
1.1 misho 422: here=`pwd`; \
1.1.1.2 ! misho 423: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
! 424: include_option=--etags-include; \
! 425: empty_fix=.; \
! 426: else \
! 427: include_option=--include; \
! 428: empty_fix=; \
! 429: fi; \
1.1 misho 430: list='$(SUBDIRS)'; for subdir in $$list; do \
431: if test "$$subdir" = .; then :; else \
1.1.1.2 ! misho 432: test ! -f $$subdir/TAGS || \
! 433: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
1.1 misho 434: fi; \
435: done; \
436: list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
437: unique=`for i in $$list; do \
438: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
439: done | \
1.1.1.2 ! misho 440: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 441: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 442: shift; \
! 443: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
! 444: test -n "$$unique" || unique=$$empty_fix; \
! 445: if test $$# -gt 0; then \
! 446: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 447: "$$@" $$unique; \
! 448: else \
! 449: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 450: $$unique; \
! 451: fi; \
! 452: fi
! 453: ctags: CTAGS
! 454: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
! 455: $(TAGS_FILES) $(LISP)
! 456: list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
! 457: unique=`for i in $$list; do \
! 458: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 459: done | \
! 460: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 461: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 462: test -z "$(CTAGS_ARGS)$$unique" \
! 463: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
! 464: $$unique
1.1 misho 465:
466: GTAGS:
467: here=`$(am__cd) $(top_builddir) && pwd` \
1.1.1.2 ! misho 468: && $(am__cd) $(top_srcdir) \
! 469: && gtags -i $(GTAGS_ARGS) "$$here"
1.1 misho 470:
471: distclean-tags:
1.1.1.2 ! misho 472: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1.1 misho 473:
474: distdir: $(DISTFILES)
1.1.1.2 ! misho 475: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 476: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 477: list='$(DISTFILES)'; \
! 478: dist_files=`for file in $$list; do echo $$file; done | \
! 479: sed -e "s|^$$srcdirstrip/||;t" \
! 480: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 481: case $$dist_files in \
! 482: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 483: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 484: sort -u` ;; \
! 485: esac; \
! 486: for file in $$dist_files; do \
1.1 misho 487: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
488: if test -d $$d/$$file; then \
1.1.1.2 ! misho 489: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 490: if test -d "$(distdir)/$$file"; then \
! 491: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 492: fi; \
1.1 misho 493: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1.1.1.2 ! misho 494: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 495: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1.1 misho 496: fi; \
1.1.1.2 ! misho 497: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1.1 misho 498: else \
1.1.1.2 ! misho 499: test -f "$(distdir)/$$file" \
! 500: || cp -p $$d/$$file "$(distdir)/$$file" \
1.1 misho 501: || exit 1; \
502: fi; \
503: done
1.1.1.2 ! misho 504: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1.1 misho 505: if test "$$subdir" = .; then :; else \
1.1.1.2 ! misho 506: test -d "$(distdir)/$$subdir" \
! 507: || $(MKDIR_P) "$(distdir)/$$subdir" \
1.1 misho 508: || exit 1; \
1.1.1.2 ! misho 509: fi; \
! 510: done
! 511: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 512: if test "$$subdir" = .; then :; else \
! 513: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
! 514: $(am__relativize); \
! 515: new_distdir=$$reldir; \
! 516: dir1=$$subdir; dir2="$(top_distdir)"; \
! 517: $(am__relativize); \
! 518: new_top_distdir=$$reldir; \
! 519: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
! 520: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
! 521: ($(am__cd) $$subdir && \
1.1 misho 522: $(MAKE) $(AM_MAKEFLAGS) \
1.1.1.2 ! misho 523: top_distdir="$$new_top_distdir" \
! 524: distdir="$$new_distdir" \
! 525: am__remove_distdir=: \
! 526: am__skip_length_check=: \
! 527: am__skip_mode_fix=: \
1.1 misho 528: distdir) \
529: || exit 1; \
530: fi; \
531: done
532: check-am: all-am
533: check: check-recursive
534: all-am: Makefile $(HEADERS) config.h
535: installdirs: installdirs-recursive
536: installdirs-am:
1.1.1.2 ! misho 537: for dir in "$(DESTDIR)$(includedir)"; do \
! 538: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
! 539: done
1.1 misho 540: install: install-recursive
541: install-exec: install-exec-recursive
542: install-data: install-data-recursive
543: uninstall: uninstall-recursive
544:
545: install-am: all-am
546: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
547:
548: installcheck: installcheck-recursive
549: install-strip:
550: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1.1.1.2 ! misho 551: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1.1 misho 552: `test -z '$(STRIP)' || \
553: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
554: mostlyclean-generic:
555:
556: clean-generic:
557:
558: distclean-generic:
1.1.1.2 ! misho 559: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 560: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1.1 misho 561: -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
562:
563: maintainer-clean-generic:
564: @echo "This command is intended for maintainers to use"
565: @echo "it deletes files that may require special tools to rebuild."
566: clean: clean-recursive
567:
1.1.1.2 ! misho 568: clean-am: clean-generic clean-libtool mostlyclean-am
1.1 misho 569:
570: distclean: distclean-recursive
1.1.1.2 ! misho 571: -rm -f Makefile
1.1 misho 572: distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
573:
574: dvi: dvi-recursive
575:
576: dvi-am:
577:
1.1.1.2 ! misho 578: html: html-recursive
! 579:
! 580: html-am:
! 581:
1.1 misho 582: info: info-recursive
583:
584: info-am:
585:
1.1.1.2 ! misho 586: install-data-am: install-nodist_includeHEADERS
! 587:
! 588: install-dvi: install-dvi-recursive
! 589:
! 590: install-dvi-am:
1.1 misho 591:
592: install-exec-am:
593:
1.1.1.2 ! misho 594: install-html: install-html-recursive
! 595:
! 596: install-html-am:
! 597:
1.1 misho 598: install-info: install-info-recursive
599:
1.1.1.2 ! misho 600: install-info-am:
! 601:
1.1 misho 602: install-man:
603:
1.1.1.2 ! misho 604: install-pdf: install-pdf-recursive
! 605:
! 606: install-pdf-am:
! 607:
! 608: install-ps: install-ps-recursive
! 609:
! 610: install-ps-am:
! 611:
1.1 misho 612: installcheck-am:
613:
614: maintainer-clean: maintainer-clean-recursive
1.1.1.2 ! misho 615: -rm -f Makefile
1.1 misho 616: maintainer-clean-am: distclean-am maintainer-clean-generic
617:
618: mostlyclean: mostlyclean-recursive
619:
1.1.1.2 ! misho 620: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 621:
! 622: pdf: pdf-recursive
! 623:
! 624: pdf-am:
1.1 misho 625:
1.1.1.2 ! misho 626: ps: ps-recursive
1.1 misho 627:
1.1.1.2 ! misho 628: ps-am:
! 629:
! 630: uninstall-am: uninstall-nodist_includeHEADERS
! 631:
! 632: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
! 633: ctags-recursive install-am install-strip tags-recursive
! 634:
! 635: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
! 636: all all-am check check-am clean clean-generic clean-libtool \
! 637: ctags ctags-recursive distclean distclean-generic \
! 638: distclean-hdr distclean-libtool distclean-tags distdir dvi \
! 639: dvi-am html html-am info info-am install install-am \
! 640: install-data install-data-am install-dvi install-dvi-am \
! 641: install-exec install-exec-am install-html install-html-am \
! 642: install-info install-info-am install-man \
! 643: install-nodist_includeHEADERS install-pdf install-pdf-am \
! 644: install-ps install-ps-am install-strip installcheck \
! 645: installcheck-am installdirs installdirs-am maintainer-clean \
! 646: maintainer-clean-generic mostlyclean mostlyclean-generic \
! 647: mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
! 648: uninstall uninstall-am uninstall-nodist_includeHEADERS
1.1 misho 649:
650:
651: # Tell versions [3.59,3.63) of GNU make to not export all variables.
652: # Otherwise a system limit (for SysV at least) may be exceeded.
653: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>