Annotation of embedaddon/libnet/libnet.doxygen.conf, revision 1.1.1.1
1.1 misho 1: # Doxyfile 1.3.2
2: # $Id: libnet.doxygen.conf,v 1.2 2003/07/12 00:39:54 route Exp $
3:
4: # This file describes the settings to be used by the documentation system
5: # doxygen (www.doxygen.org) for a project
6: #
7: # All text after a hash (#) is considered a comment and will be ignored
8: # The format is:
9: # TAG = value [value, ...]
10: # For lists items can also be appended using:
11: # TAG += value [value, ...]
12: # Values that contain spaces should be placed between quotes (" ")
13:
14: #---------------------------------------------------------------------------
15: # General configuration options
16: #---------------------------------------------------------------------------
17:
18: # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
19: # by quotes) that should identify the project.
20:
21: PROJECT_NAME = "libnet"
22:
23: # The PROJECT_NUMBER tag can be used to enter a project or revision number.
24: # This could be handy for archiving the generated documentation or
25: # if some version control system is used.
26:
27: PROJECT_NUMBER = "1.1.1"
28:
29: # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
30: # base path where the generated documentation will be put.
31: # If a relative path is entered, it will be relative to the location
32: # where doxygen was started. If left blank the current directory will be used.
33:
34: OUTPUT_DIRECTORY = "doc"
35:
36: # The OUTPUT_LANGUAGE tag is used to specify the language in which all
37: # documentation generated by doxygen is written. Doxygen will use this
38: # information to generate all constant output in the proper language.
39: # The default language is English, other supported languages are:
40: # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch,
41: # Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en
42: # (Japanese with English messages), Korean, Norwegian, Polish, Portuguese,
43: # Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
44:
45: OUTPUT_LANGUAGE = English
46:
47: # This tag can be used to specify the encoding used in the generated output.
48: # The encoding is not always determined by the language that is chosen,
49: # but also whether or not the output is meant for Windows or non-Windows users.
50: # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
51: # forces the Windows encoding (this is the default for the Windows binary),
52: # whereas setting the tag to NO uses a Unix-style encoding (the default for
53: # all platforms other than Windows).
54:
55: USE_WINDOWS_ENCODING = NO
56:
57: # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
58: # documentation are documented, even if no documentation was available.
59: # Private class members and static file members will be hidden unless
60: # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
61:
62: EXTRACT_ALL = NO
63:
64: # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
65: # will be included in the documentation.
66:
67: EXTRACT_PRIVATE = NO
68:
69: # If the EXTRACT_STATIC tag is set to YES all static members of a file
70: # will be included in the documentation.
71:
72: EXTRACT_STATIC = NO
73:
74: # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
75: # defined locally in source files will be included in the documentation.
76: # If set to NO only classes defined in header files are included.
77:
78: EXTRACT_LOCAL_CLASSES = YES
79:
80: # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
81: # undocumented members of documented classes, files or namespaces.
82: # If set to NO (the default) these members will be included in the
83: # various overviews, but no documentation section is generated.
84: # This option has no effect if EXTRACT_ALL is enabled.
85:
86: HIDE_UNDOC_MEMBERS = NO
87:
88: # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
89: # undocumented classes that are normally visible in the class hierarchy.
90: # If set to NO (the default) these classes will be included in the various
91: # overviews. This option has no effect if EXTRACT_ALL is enabled.
92:
93: HIDE_UNDOC_CLASSES = NO
94:
95: # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
96: # friend (class|struct|union) declarations.
97: # If set to NO (the default) these declarations will be included in the
98: # documentation.
99:
100: HIDE_FRIEND_COMPOUNDS = NO
101:
102: # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
103: # documentation blocks found inside the body of a function.
104: # If set to NO (the default) these blocks will be appended to the
105: # function's detailed documentation block.
106:
107: HIDE_IN_BODY_DOCS = NO
108:
109: # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
110: # include brief member descriptions after the members that are listed in
111: # the file and class documentation (similar to JavaDoc).
112: # Set to NO to disable this.
113:
114: BRIEF_MEMBER_DESC = YES
115:
116: # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
117: # the brief description of a member or function before the detailed description.
118: # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
119: # brief descriptions will be completely suppressed.
120:
121: REPEAT_BRIEF = YES
122:
123: # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
124: # Doxygen will generate a detailed section even if there is only a brief
125: # description.
126:
127: ALWAYS_DETAILED_SEC = NO
128:
129: # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
130: # members of a class in the documentation of that class as if those members were
131: # ordinary class members. Constructors, destructors and assignment operators of
132: # the base classes will not be shown.
133:
134: INLINE_INHERITED_MEMB = NO
135:
136: # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
137: # path before files name in the file list and in the header files. If set
138: # to NO the shortest path that makes the file name unique will be used.
139:
140: FULL_PATH_NAMES = NO
141:
142: # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
143: # can be used to strip a user-defined part of the path. Stripping is
144: # only done if one of the specified strings matches the left-hand part of
145: # the path. It is allowed to use relative paths in the argument list.
146:
147: STRIP_FROM_PATH =
148:
149: # The INTERNAL_DOCS tag determines if documentation
150: # that is typed after a \internal command is included. If the tag is set
151: # to NO (the default) then the documentation will be excluded.
152: # Set it to YES to include the internal documentation.
153:
154: INTERNAL_DOCS = NO
155:
156: # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
157: # file names in lower-case letters. If set to YES upper-case letters are also
158: # allowed. This is useful if you have classes or files whose names only differ
159: # in case and if your file system supports case sensitive file names. Windows
160: # users are advised to set this option to NO.
161:
162: CASE_SENSE_NAMES = YES
163:
164: # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
165: # (but less readable) file names. This can be useful is your file systems
166: # doesn't support long names like on DOS, Mac, or CD-ROM.
167:
168: SHORT_NAMES = NO
169:
170: # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
171: # will show members with their full class and namespace scopes in the
172: # documentation. If set to YES the scope will be hidden.
173:
174: HIDE_SCOPE_NAMES = NO
175:
176: # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
177: # will put a list of the files that are included by a file in the documentation
178: # of that file.
179:
180: SHOW_INCLUDE_FILES = YES
181:
182: # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
183: # will interpret the first line (until the first dot) of a JavaDoc-style
184: # comment as the brief description. If set to NO, the JavaDoc
185: # comments will behave just like the Qt-style comments (thus requiring an
186: # explict @brief command for a brief description.
187:
188: JAVADOC_AUTOBRIEF = NO
189:
190: # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
191: # treat a multi-line C++ special comment block (i.e. a block of //! or ///
192: # comments) as a brief description. This used to be the default behaviour.
193: # The new default is to treat a multi-line C++ comment block as a detailed
194: # description. Set this tag to YES if you prefer the old behaviour instead.
195:
196: MULTILINE_CPP_IS_BRIEF = NO
197:
198: # If the DETAILS_AT_TOP tag is set to YES then Doxygen
199: # will output the detailed description near the top, like JavaDoc.
200: # If set to NO, the detailed description appears after the member
201: # documentation.
202:
203: DETAILS_AT_TOP = NO
204:
205: # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
206: # member inherits the documentation from any documented member that it
207: # reimplements.
208:
209: INHERIT_DOCS = YES
210:
211: # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
212: # is inserted in the documentation for inline members.
213:
214: INLINE_INFO = YES
215:
216: # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
217: # will sort the (detailed) documentation of file and class members
218: # alphabetically by member name. If set to NO the members will appear in
219: # declaration order.
220:
221: SORT_MEMBER_DOCS = YES
222:
223: # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
224: # tag is set to YES, then doxygen will reuse the documentation of the first
225: # member in the group (if any) for the other members of the group. By default
226: # all members of a group must be documented explicitly.
227:
228: DISTRIBUTE_GROUP_DOC = NO
229:
230: # The TAB_SIZE tag can be used to set the number of spaces in a tab.
231: # Doxygen uses this value to replace tabs by spaces in code fragments.
232:
233: TAB_SIZE = 4
234:
235: # The GENERATE_TODOLIST tag can be used to enable (YES) or
236: # disable (NO) the todo list. This list is created by putting \todo
237: # commands in the documentation.
238:
239: GENERATE_TODOLIST = YES
240:
241: # The GENERATE_TESTLIST tag can be used to enable (YES) or
242: # disable (NO) the test list. This list is created by putting \test
243: # commands in the documentation.
244:
245: GENERATE_TESTLIST = YES
246:
247: # The GENERATE_BUGLIST tag can be used to enable (YES) or
248: # disable (NO) the bug list. This list is created by putting \bug
249: # commands in the documentation.
250:
251: GENERATE_BUGLIST = YES
252:
253: # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
254: # disable (NO) the deprecated list. This list is created by putting
255: # \deprecated commands in the documentation.
256:
257: GENERATE_DEPRECATEDLIST= YES
258:
259: # This tag can be used to specify a number of aliases that acts
260: # as commands in the documentation. An alias has the form "name=value".
261: # For example adding "sideeffect=\par Side Effects:\n" will allow you to
262: # put the command \sideeffect (or @sideeffect) in the documentation, which
263: # will result in a user-defined paragraph with heading "Side Effects:".
264: # You can put \n's in the value part of an alias to insert newlines.
265:
266: ALIASES =
267:
268: # The ENABLED_SECTIONS tag can be used to enable conditional
269: # documentation sections, marked by \if sectionname ... \endif.
270:
271: ENABLED_SECTIONS =
272:
273: # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
274: # the initial value of a variable or define consists of for it to appear in
275: # the documentation. If the initializer consists of more lines than specified
276: # here it will be hidden. Use a value of 0 to hide initializers completely.
277: # The appearance of the initializer of individual variables and defines in the
278: # documentation can be controlled using \showinitializer or \hideinitializer
279: # command in the documentation regardless of this setting.
280:
281: MAX_INITIALIZER_LINES = 30
282:
283: # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
284: # only. Doxygen will then generate output that is more tailored for C.
285: # For instance, some of the names that are used will be different. The list
286: # of all members will be omitted, etc.
287:
288: OPTIMIZE_OUTPUT_FOR_C = YES
289:
290: # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
291: # only. Doxygen will then generate output that is more tailored for Java.
292: # For instance, namespaces will be presented as packages, qualified scopes
293: # will look different, etc.
294:
295: OPTIMIZE_OUTPUT_JAVA = NO
296:
297: # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
298: # at the bottom of the documentation of classes and structs. If set to YES the
299: # list will mention the files that were used to generate the documentation.
300:
301: SHOW_USED_FILES = YES
302:
303: #---------------------------------------------------------------------------
304: # configuration options related to warning and progress messages
305: #---------------------------------------------------------------------------
306:
307: # The QUIET tag can be used to turn on/off the messages that are generated
308: # by doxygen. Possible values are YES and NO. If left blank NO is used.
309:
310: QUIET = NO
311:
312: # The WARNINGS tag can be used to turn on/off the warning messages that are
313: # generated by doxygen. Possible values are YES and NO. If left blank
314: # NO is used.
315:
316: WARNINGS = YES
317:
318: # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
319: # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
320: # automatically be disabled.
321:
322: WARN_IF_UNDOCUMENTED = YES
323:
324: # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
325: # potential errors in the documentation, such as not documenting some
326: # parameters in a documented function, or documenting parameters that
327: # don't exist or using markup commands wrongly.
328:
329: WARN_IF_DOC_ERROR = YES
330:
331: # The WARN_FORMAT tag determines the format of the warning messages that
332: # doxygen can produce. The string should contain the $file, $line, and $text
333: # tags, which will be replaced by the file and line number from which the
334: # warning originated and the warning text.
335:
336: WARN_FORMAT = "$file:$line: $text"
337:
338: # The WARN_LOGFILE tag can be used to specify a file to which warning
339: # and error messages should be written. If left blank the output is written
340: # to stderr.
341:
342: WARN_LOGFILE =
343:
344: #---------------------------------------------------------------------------
345: # configuration options related to the input files
346: #---------------------------------------------------------------------------
347:
348: # The INPUT tag can be used to specify the files and/or directories that contain
349: # documented source files. You may enter file names like "myfile.cpp" or
350: # directories like "/usr/src/myproject". Separate the files or directories
351: # with spaces.
352:
353: INPUT = .
354:
355: # If the value of the INPUT tag contains directories, you can use the
356: # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
357: # and *.h) to filter out the source-files in the directories. If left
358: # blank the following patterns are tested:
359: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
360: # *.h++ *.idl *.odl *.cs
361:
362: FILE_PATTERNS = *.c *.h *.in
363:
364: # The RECURSIVE tag can be used to turn specify whether or not subdirectories
365: # should be searched for input files as well. Possible values are YES and NO.
366: # If left blank NO is used.
367:
368: RECURSIVE = YES
369:
370: # The EXCLUDE tag can be used to specify files and/or directories that should
371: # excluded from the INPUT source files. This way you can easily exclude a
372: # subdirectory from a directory tree whose root is specified with the INPUT tag.
373:
374: EXCLUDE =
375:
376: # The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
377: # that are symbolic links (a Unix filesystem feature) are excluded from the input.
378:
379: EXCLUDE_SYMLINKS = NO
380:
381: # If the value of the INPUT tag contains directories, you can use the
382: # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
383: # certain files from those directories.
384:
385: EXCLUDE_PATTERNS = */sample/*
386:
387: # The EXAMPLE_PATH tag can be used to specify one or more files or
388: # directories that contain example code fragments that are included (see
389: # the \include command).
390:
391: EXAMPLE_PATH =
392:
393: # If the value of the EXAMPLE_PATH tag contains directories, you can use the
394: # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
395: # and *.h) to filter out the source-files in the directories. If left
396: # blank all files are included.
397:
398: EXAMPLE_PATTERNS =
399:
400: # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
401: # searched for input files to be used with the \include or \dontinclude
402: # commands irrespective of the value of the RECURSIVE tag.
403: # Possible values are YES and NO. If left blank NO is used.
404:
405: EXAMPLE_RECURSIVE = NO
406:
407: # The IMAGE_PATH tag can be used to specify one or more files or
408: # directories that contain image that are included in the documentation (see
409: # the \image command).
410:
411: IMAGE_PATH =
412:
413: # The INPUT_FILTER tag can be used to specify a program that doxygen should
414: # invoke to filter for each input file. Doxygen will invoke the filter program
415: # by executing (via popen()) the command <filter> <input-file>, where <filter>
416: # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
417: # input file. Doxygen will then use the output that the filter program writes
418: # to standard output.
419:
420: INPUT_FILTER =
421:
422: # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
423: # INPUT_FILTER) will be used to filter the input files when producing source
424: # files to browse (i.e. when SOURCE_BROWSER is set to YES).
425:
426: FILTER_SOURCE_FILES = NO
427:
428: #---------------------------------------------------------------------------
429: # configuration options related to source browsing
430: #---------------------------------------------------------------------------
431:
432: # If the SOURCE_BROWSER tag is set to YES then a list of source files will
433: # be generated. Documented entities will be cross-referenced with these sources.
434:
435: SOURCE_BROWSER = NO
436:
437: # Setting the INLINE_SOURCES tag to YES will include the body
438: # of functions and classes directly in the documentation.
439:
440: INLINE_SOURCES = NO
441:
442: # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
443: # doxygen to hide any special comment blocks from generated source code
444: # fragments. Normal C and C++ comments will always remain visible.
445:
446: STRIP_CODE_COMMENTS = YES
447:
448: # If the REFERENCED_BY_RELATION tag is set to YES (the default)
449: # then for each documented function all documented
450: # functions referencing it will be listed.
451:
452: REFERENCED_BY_RELATION = YES
453:
454: # If the REFERENCES_RELATION tag is set to YES (the default)
455: # then for each documented function all documented entities
456: # called/used by that function will be listed.
457:
458: REFERENCES_RELATION = YES
459:
460: # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
461: # will generate a verbatim copy of the header file for each class for
462: # which an include is specified. Set to NO to disable this.
463:
464: VERBATIM_HEADERS = YES
465:
466: #---------------------------------------------------------------------------
467: # configuration options related to the alphabetical class index
468: #---------------------------------------------------------------------------
469:
470: # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
471: # of all compounds will be generated. Enable this if the project
472: # contains a lot of classes, structs, unions or interfaces.
473:
474: ALPHABETICAL_INDEX = NO
475:
476: # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
477: # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
478: # in which this list will be split (can be a number in the range [1..20])
479:
480: COLS_IN_ALPHA_INDEX = 5
481:
482: # In case all classes in a project start with a common prefix, all
483: # classes will be put under the same header in the alphabetical index.
484: # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
485: # should be ignored while generating the index headers.
486:
487: IGNORE_PREFIX =
488:
489: #---------------------------------------------------------------------------
490: # configuration options related to the HTML output
491: #---------------------------------------------------------------------------
492:
493: # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
494: # generate HTML output.
495:
496: GENERATE_HTML = YES
497:
498: # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
499: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
500: # put in front of it. If left blank `html' will be used as the default path.
501:
502: HTML_OUTPUT = html
503:
504: # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
505: # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
506: # doxygen will generate files with .html extension.
507:
508: HTML_FILE_EXTENSION = .html
509:
510: # The HTML_HEADER tag can be used to specify a personal HTML header for
511: # each generated HTML page. If it is left blank doxygen will generate a
512: # standard header.
513:
514: HTML_HEADER =
515:
516: # The HTML_FOOTER tag can be used to specify a personal HTML footer for
517: # each generated HTML page. If it is left blank doxygen will generate a
518: # standard footer.
519:
520: HTML_FOOTER =
521:
522: # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
523: # style sheet that is used by each HTML page. It can be used to
524: # fine-tune the look of the HTML output. If the tag is left blank doxygen
525: # will generate a default style sheet
526:
527: HTML_STYLESHEET =
528:
529: # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
530: # files or namespaces will be aligned in HTML using tables. If set to
531: # NO a bullet list will be used.
532:
533: HTML_ALIGN_MEMBERS = YES
534:
535: # If the GENERATE_HTMLHELP tag is set to YES, additional index files
536: # will be generated that can be used as input for tools like the
537: # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
538: # of the generated HTML documentation.
539:
540: GENERATE_HTMLHELP = NO
541:
542: # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
543: # be used to specify the file name of the resulting .chm file. You
544: # can add a path in front of the file if the result should not be
545: # written to the html output dir.
546:
547: CHM_FILE =
548:
549: # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
550: # be used to specify the location (absolute path including file name) of
551: # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
552: # the HTML help compiler on the generated index.hhp.
553:
554: HHC_LOCATION =
555:
556: # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
557: # controls if a separate .chi index file is generated (YES) or that
558: # it should be included in the master .chm file (NO).
559:
560: GENERATE_CHI = NO
561:
562: # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
563: # controls whether a binary table of contents is generated (YES) or a
564: # normal table of contents (NO) in the .chm file.
565:
566: BINARY_TOC = NO
567:
568: # The TOC_EXPAND flag can be set to YES to add extra items for group members
569: # to the contents of the HTML help documentation and to the tree view.
570:
571: TOC_EXPAND = NO
572:
573: # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
574: # top of each HTML page. The value NO (the default) enables the index and
575: # the value YES disables it.
576:
577: DISABLE_INDEX = NO
578:
579: # This tag can be used to set the number of enum values (range [1..20])
580: # that doxygen will group on one line in the generated HTML documentation.
581:
582: ENUM_VALUES_PER_LINE = 4
583:
584: # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
585: # generated containing a tree-like index structure (just like the one that
586: # is generated for HTML Help). For this to work a browser that supports
587: # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
588: # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
589: # probably better off using the HTML help feature.
590:
591: GENERATE_TREEVIEW = NO
592:
593: # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
594: # used to set the initial width (in pixels) of the frame in which the tree
595: # is shown.
596:
597: TREEVIEW_WIDTH = 250
598:
599: #---------------------------------------------------------------------------
600: # configuration options related to the LaTeX output
601: #---------------------------------------------------------------------------
602:
603: # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
604: # generate Latex output.
605:
606: GENERATE_LATEX = NO
607:
608: # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
609: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
610: # put in front of it. If left blank `latex' will be used as the default path.
611:
612: LATEX_OUTPUT = latex
613:
614: # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
615: # invoked. If left blank `latex' will be used as the default command name.
616:
617: LATEX_CMD_NAME = latex
618:
619: # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
620: # generate index for LaTeX. If left blank `makeindex' will be used as the
621: # default command name.
622:
623: MAKEINDEX_CMD_NAME = makeindex
624:
625: # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
626: # LaTeX documents. This may be useful for small projects and may help to
627: # save some trees in general.
628:
629: COMPACT_LATEX = NO
630:
631: # The PAPER_TYPE tag can be used to set the paper type that is used
632: # by the printer. Possible values are: a4, a4wide, letter, legal and
633: # executive. If left blank a4wide will be used.
634:
635: PAPER_TYPE = a4wide
636:
637: # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
638: # packages that should be included in the LaTeX output.
639:
640: EXTRA_PACKAGES =
641:
642: # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
643: # the generated latex document. The header should contain everything until
644: # the first chapter. If it is left blank doxygen will generate a
645: # standard header. Notice: only use this tag if you know what you are doing!
646:
647: LATEX_HEADER =
648:
649: # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
650: # is prepared for conversion to pdf (using ps2pdf). The pdf file will
651: # contain links (just like the HTML output) instead of page references
652: # This makes the output suitable for online browsing using a pdf viewer.
653:
654: PDF_HYPERLINKS = NO
655:
656: # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
657: # plain latex in the generated Makefile. Set this option to YES to get a
658: # higher quality PDF documentation.
659:
660: USE_PDFLATEX = NO
661:
662: # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
663: # command to the generated LaTeX files. This will instruct LaTeX to keep
664: # running if errors occur, instead of asking the user for help.
665: # This option is also used when generating formulas in HTML.
666:
667: LATEX_BATCHMODE = NO
668:
669: # If LATEX_HIDE_INDICES is set to YES then doxygen will not
670: # include the index chapters (such as File Index, Compound Index, etc.)
671: # in the output.
672:
673: LATEX_HIDE_INDICES = NO
674:
675: #---------------------------------------------------------------------------
676: # configuration options related to the RTF output
677: #---------------------------------------------------------------------------
678:
679: # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
680: # The RTF output is optimised for Word 97 and may not look very pretty with
681: # other RTF readers or editors.
682:
683: GENERATE_RTF = NO
684:
685: # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
686: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
687: # put in front of it. If left blank `rtf' will be used as the default path.
688:
689: RTF_OUTPUT = rtf
690:
691: # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
692: # RTF documents. This may be useful for small projects and may help to
693: # save some trees in general.
694:
695: COMPACT_RTF = NO
696:
697: # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
698: # will contain hyperlink fields. The RTF file will
699: # contain links (just like the HTML output) instead of page references.
700: # This makes the output suitable for online browsing using WORD or other
701: # programs which support those fields.
702: # Note: wordpad (write) and others do not support links.
703:
704: RTF_HYPERLINKS = NO
705:
706: # Load stylesheet definitions from file. Syntax is similar to doxygen's
707: # config file, i.e. a series of assigments. You only have to provide
708: # replacements, missing definitions are set to their default value.
709:
710: RTF_STYLESHEET_FILE =
711:
712: # Set optional variables used in the generation of an rtf document.
713: # Syntax is similar to doxygen's config file.
714:
715: RTF_EXTENSIONS_FILE =
716:
717: #---------------------------------------------------------------------------
718: # configuration options related to the man page output
719: #---------------------------------------------------------------------------
720:
721: # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
722: # generate man pages
723:
724: GENERATE_MAN = YES
725:
726: # The MAN_OUTPUT tag is used to specify where the man pages will be put.
727: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
728: # put in front of it. If left blank `man' will be used as the default path.
729:
730: MAN_OUTPUT = man
731:
732: # The MAN_EXTENSION tag determines the extension that is added to
733: # the generated man pages (default is the subroutine's section .3)
734:
735: MAN_EXTENSION = .3
736:
737: # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
738: # then it will generate one additional man file for each entity
739: # documented in the real man page(s). These additional files
740: # only source the real man page, but without them the man command
741: # would be unable to find the correct page. The default is NO.
742:
743: MAN_LINKS = NO
744:
745: #---------------------------------------------------------------------------
746: # configuration options related to the XML output
747: #---------------------------------------------------------------------------
748:
749: # If the GENERATE_XML tag is set to YES Doxygen will
750: # generate an XML file that captures the structure of
751: # the code including all documentation. Note that this
752: # feature is still experimental and incomplete at the
753: # moment.
754:
755: GENERATE_XML = NO
756:
757: # The XML_OUTPUT tag is used to specify where the XML pages will be put.
758: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
759: # put in front of it. If left blank `xml' will be used as the default path.
760:
761: XML_OUTPUT = xml
762:
763: # The XML_SCHEMA tag can be used to specify an XML schema,
764: # which can be used by a validating XML parser to check the
765: # syntax of the XML files.
766:
767: XML_SCHEMA =
768:
769: # The XML_DTD tag can be used to specify an XML DTD,
770: # which can be used by a validating XML parser to check the
771: # syntax of the XML files.
772:
773: XML_DTD =
774:
775: #---------------------------------------------------------------------------
776: # configuration options for the AutoGen Definitions output
777: #---------------------------------------------------------------------------
778:
779: # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
780: # generate an AutoGen Definitions (see autogen.sf.net) file
781: # that captures the structure of the code including all
782: # documentation. Note that this feature is still experimental
783: # and incomplete at the moment.
784:
785: GENERATE_AUTOGEN_DEF = NO
786:
787: #---------------------------------------------------------------------------
788: # configuration options related to the Perl module output
789: #---------------------------------------------------------------------------
790:
791: # If the GENERATE_PERLMOD tag is set to YES Doxygen will
792: # generate a Perl module file that captures the structure of
793: # the code including all documentation. Note that this
794: # feature is still experimental and incomplete at the
795: # moment.
796:
797: GENERATE_PERLMOD = NO
798:
799: # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
800: # the necessary Makefile rules, Perl scripts and LaTeX code to be able
801: # to generate PDF and DVI output from the Perl module output.
802:
803: PERLMOD_LATEX = NO
804:
805: # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
806: # nicely formatted so it can be parsed by a human reader. This is useful
807: # if you want to understand what is going on. On the other hand, if this
808: # tag is set to NO the size of the Perl module output will be much smaller
809: # and Perl will parse it just the same.
810:
811: PERLMOD_PRETTY = YES
812:
813: # The names of the make variables in the generated doxyrules.make file
814: # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
815: # This is useful so different doxyrules.make files included by the same
816: # Makefile don't overwrite each other's variables.
817:
818: PERLMOD_MAKEVAR_PREFIX =
819:
820: #---------------------------------------------------------------------------
821: # Configuration options related to the preprocessor
822: #---------------------------------------------------------------------------
823:
824: # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
825: # evaluate all C-preprocessor directives found in the sources and include
826: # files.
827:
828: ENABLE_PREPROCESSING = YES
829:
830: # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
831: # names in the source code. If set to NO (the default) only conditional
832: # compilation will be performed. Macro expansion can be done in a controlled
833: # way by setting EXPAND_ONLY_PREDEF to YES.
834:
835: MACRO_EXPANSION = NO
836:
837: # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
838: # then the macro expansion is limited to the macros specified with the
839: # PREDEFINED and EXPAND_AS_PREDEFINED tags.
840:
841: EXPAND_ONLY_PREDEF = NO
842:
843: # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
844: # in the INCLUDE_PATH (see below) will be search if a #include is found.
845:
846: SEARCH_INCLUDES = YES
847:
848: # The INCLUDE_PATH tag can be used to specify one or more directories that
849: # contain include files that are not input files but should be processed by
850: # the preprocessor.
851:
852: INCLUDE_PATH =
853:
854: # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
855: # patterns (like *.h and *.hpp) to filter out the header-files in the
856: # directories. If left blank, the patterns specified with FILE_PATTERNS will
857: # be used.
858:
859: INCLUDE_FILE_PATTERNS =
860:
861: # The PREDEFINED tag can be used to specify one or more macro names that
862: # are defined before the preprocessor is started (similar to the -D option of
863: # gcc). The argument of the tag is a list of macros of the form: name
864: # or name=definition (no spaces). If the definition and the = are
865: # omitted =1 is assumed.
866:
867: PREDEFINED =
868:
869: # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
870: # this tag can be used to specify a list of macro names that should be expanded.
871: # The macro definition that is found in the sources will be used.
872: # Use the PREDEFINED tag if you want to use a different macro definition.
873:
874: EXPAND_AS_DEFINED =
875:
876: # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
877: # doxygen's preprocessor will remove all function-like macros that are alone
878: # on a line, have an all uppercase name, and do not end with a semicolon. Such
879: # function macros are typically used for boiler-plate code, and will confuse the
880: # parser if not removed.
881:
882: SKIP_FUNCTION_MACROS = YES
883:
884: #---------------------------------------------------------------------------
885: # Configuration::addtions related to external references
886: #---------------------------------------------------------------------------
887:
888: # The TAGFILES option can be used to specify one or more tagfiles.
889: # Optionally an initial location of the external documentation
890: # can be added for each tagfile. The format of a tag file without
891: # this location is as follows:
892: # TAGFILES = file1 file2 ...
893: # Adding location for the tag files is done as follows:
894: # TAGFILES = file1=loc1 "file2 = loc2" ...
895: # where "loc1" and "loc2" can be relative or absolute paths or
896: # URLs. If a location is present for each tag, the installdox tool
897: # does not have to be run to correct the links.
898: # Note that each tag file must have a unique name
899: # (where the name does NOT include the path)
900: # If a tag file is not located in the directory in which doxygen
901: # is run, you must also specify the path to the tagfile here.
902:
903: TAGFILES =
904:
905: # When a file name is specified after GENERATE_TAGFILE, doxygen will create
906: # a tag file that is based on the input files it reads.
907:
908: GENERATE_TAGFILE =
909:
910: # If the ALLEXTERNALS tag is set to YES all external classes will be listed
911: # in the class index. If set to NO only the inherited external classes
912: # will be listed.
913:
914: ALLEXTERNALS = NO
915:
916: # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
917: # in the modules index. If set to NO, only the current project's groups will
918: # be listed.
919:
920: EXTERNAL_GROUPS = YES
921:
922: # The PERL_PATH should be the absolute path and name of the perl script
923: # interpreter (i.e. the result of `which perl').
924:
925: PERL_PATH = /usr/bin/perl
926:
927: #---------------------------------------------------------------------------
928: # Configuration options related to the dot tool
929: #---------------------------------------------------------------------------
930:
931: # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
932: # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or
933: # super classes. Setting the tag to NO turns the diagrams off. Note that this
934: # option is superceded by the HAVE_DOT option below. This is only a fallback. It is
935: # recommended to install and use dot, since it yields more powerful graphs.
936:
937: CLASS_DIAGRAMS = YES
938:
939: # If set to YES, the inheritance and collaboration graphs will hide
940: # inheritance and usage relations if the target is undocumented
941: # or is not a class.
942:
943: HIDE_UNDOC_RELATIONS = YES
944:
945: # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
946: # available from the path. This tool is part of Graphviz, a graph visualization
947: # toolkit from AT&T and Lucent Bell Labs. The other options in this section
948: # have no effect if this option is set to NO (the default)
949:
950: HAVE_DOT = YES
951:
952: # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
953: # will generate a graph for each documented class showing the direct and
954: # indirect inheritance relations. Setting this tag to YES will force the
955: # the CLASS_DIAGRAMS tag to NO.
956:
957: CLASS_GRAPH = YES
958:
959: # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
960: # will generate a graph for each documented class showing the direct and
961: # indirect implementation dependencies (inheritance, containment, and
962: # class references variables) of the class with other documented classes.
963:
964: COLLABORATION_GRAPH = YES
965:
966: # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
967: # colloborations diagrams in a style similiar to the OMG's Unified Modeling
968: # Language.
969:
970: UML_LOOK = NO
971:
972: # If set to YES, the inheritance and collaboration graphs will show the
973: # relations between templates and their instances.
974:
975: TEMPLATE_RELATIONS = NO
976:
977: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
978: # tags are set to YES then doxygen will generate a graph for each documented
979: # file showing the direct and indirect include dependencies of the file with
980: # other documented files.
981:
982: INCLUDE_GRAPH = YES
983:
984: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
985: # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
986: # documented header file showing the documented files that directly or
987: # indirectly include this file.
988:
989: INCLUDED_BY_GRAPH = YES
990:
991: # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
992: # generate a call dependency graph for every global function or class method.
993: # Note that enabling this option will significantly increase the time of a run.
994: # So in most cases it will be better to enable call graphs for selected
995: # functions only using the \callgraph command.
996:
997: CALL_GRAPH = NO
998:
999: # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1000: # will graphical hierarchy of all classes instead of a textual one.
1001:
1002: GRAPHICAL_HIERARCHY = YES
1003:
1004: # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1005: # generated by dot. Possible values are png, jpg, or gif
1006: # If left blank png will be used.
1007:
1008: DOT_IMAGE_FORMAT = png
1009:
1010: # The tag DOT_PATH can be used to specify the path where the dot tool can be
1011: # found. If left blank, it is assumed the dot tool can be found on the path.
1012:
1013: DOT_PATH =
1014:
1015: # The DOTFILE_DIRS tag can be used to specify one or more directories that
1016: # contain dot files that are included in the documentation (see the
1017: # \dotfile command).
1018:
1019: DOTFILE_DIRS =
1020:
1021: # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1022: # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1023: # this value, doxygen will try to truncate the graph, so that it fits within
1024: # the specified constraint. Beware that most browsers cannot cope with very
1025: # large images.
1026:
1027: MAX_DOT_GRAPH_WIDTH = 1024
1028:
1029: # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1030: # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1031: # this value, doxygen will try to truncate the graph, so that it fits within
1032: # the specified constraint. Beware that most browsers cannot cope with very
1033: # large images.
1034:
1035: MAX_DOT_GRAPH_HEIGHT = 1024
1036:
1037: # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1038: # graphs generated by dot. A depth value of 3 means that only nodes reachable
1039: # from the root by following a path via at most 3 edges will be shown. Nodes that
1040: # lay further from the root node will be omitted. Note that setting this option to
1041: # 1 or 2 may greatly reduce the computation time needed for large code bases. Also
1042: # note that a graph may be further truncated if the graph's image dimensions are
1043: # not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
1044: # If 0 is used for the depth value (the default), the graph is not depth-constrained.
1045:
1046: MAX_DOT_GRAPH_DEPTH = 0
1047:
1048: # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1049: # generate a legend page explaining the meaning of the various boxes and
1050: # arrows in the dot generated graphs.
1051:
1052: GENERATE_LEGEND = YES
1053:
1054: # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1055: # remove the intermediate dot files that are used to generate
1056: # the various graphs.
1057:
1058: DOT_CLEANUP = YES
1059:
1060: #---------------------------------------------------------------------------
1061: # Configuration::addtions related to the search engine
1062: #---------------------------------------------------------------------------
1063:
1064: # The SEARCHENGINE tag specifies whether or not a search engine should be
1065: # used. If set to NO the values of all tags below this one will be ignored.
1066:
1067: SEARCHENGINE = NO
1068:
1069: # The CGI_NAME tag should be the name of the CGI script that
1070: # starts the search engine (doxysearch) with the correct parameters.
1071: # A script with this name will be generated by doxygen.
1072:
1073: CGI_NAME = search.cgi
1074:
1075: # The CGI_URL tag should be the absolute URL to the directory where the
1076: # cgi binaries are located. See the documentation of your http daemon for
1077: # details.
1078:
1079: CGI_URL =
1080:
1081: # The DOC_URL tag should be the absolute URL to the directory where the
1082: # documentation is located. If left blank the absolute path to the
1083: # documentation, with file:// prepended to it, will be used.
1084:
1085: DOC_URL =
1086:
1087: # The DOC_ABSPATH tag should be the absolute path to the directory where the
1088: # documentation is located. If left blank the directory on the local machine
1089: # will be used.
1090:
1091: DOC_ABSPATH =
1092:
1093: # The BIN_ABSPATH tag must point to the directory where the doxysearch binary
1094: # is installed.
1095:
1096: BIN_ABSPATH = /usr/local/bin/
1097:
1098: # The EXT_DOC_PATHS tag can be used to specify one or more paths to
1099: # documentation generated for other projects. This allows doxysearch to search
1100: # the documentation for these projects as well.
1101:
1102: EXT_DOC_PATHS =
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to libnet.doxygen.conf CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / libnet