Annotation of embedaddon/libnet/ltmain.sh, revision 1.1
1.1 ! misho 1:
! 2: # libtool (GNU libtool) 2.4
! 3: # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
! 4:
! 5: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
! 6: # 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
! 7: # This is free software; see the source for copying conditions. There is NO
! 8: # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
! 9:
! 10: # GNU Libtool is free software; you can redistribute it and/or modify
! 11: # it under the terms of the GNU General Public License as published by
! 12: # the Free Software Foundation; either version 2 of the License, or
! 13: # (at your option) any later version.
! 14: #
! 15: # As a special exception to the GNU General Public License,
! 16: # if you distribute this file as part of a program or library that
! 17: # is built using GNU Libtool, you may include this file under the
! 18: # same distribution terms that you use for the rest of that program.
! 19: #
! 20: # GNU Libtool is distributed in the hope that it will be useful, but
! 21: # WITHOUT ANY WARRANTY; without even the implied warranty of
! 22: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! 23: # General Public License for more details.
! 24: #
! 25: # You should have received a copy of the GNU General Public License
! 26: # along with GNU Libtool; see the file COPYING. If not, a copy
! 27: # can be downloaded from http://www.gnu.org/licenses/gpl.html,
! 28: # or obtained by writing to the Free Software Foundation, Inc.,
! 29: # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
! 30:
! 31: # Usage: $progname [OPTION]... [MODE-ARG]...
! 32: #
! 33: # Provide generalized library-building support services.
! 34: #
! 35: # --config show all configuration variables
! 36: # --debug enable verbose shell tracing
! 37: # -n, --dry-run display commands without modifying any files
! 38: # --features display basic configuration information and exit
! 39: # --mode=MODE use operation mode MODE
! 40: # --preserve-dup-deps don't remove duplicate dependency libraries
! 41: # --quiet, --silent don't print informational messages
! 42: # --no-quiet, --no-silent
! 43: # print informational messages (default)
! 44: # --tag=TAG use configuration variables from tag TAG
! 45: # -v, --verbose print more informational messages than default
! 46: # --no-verbose don't print the extra informational messages
! 47: # --version print version information
! 48: # -h, --help, --help-all print short, long, or detailed help message
! 49: #
! 50: # MODE must be one of the following:
! 51: #
! 52: # clean remove files from the build directory
! 53: # compile compile a source file into a libtool object
! 54: # execute automatically set library path, then run a program
! 55: # finish complete the installation of libtool libraries
! 56: # install install libraries or executables
! 57: # link create a library or an executable
! 58: # uninstall remove libraries from an installed directory
! 59: #
! 60: # MODE-ARGS vary depending on the MODE. When passed as first option,
! 61: # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
! 62: # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
! 63: #
! 64: # When reporting a bug, please describe a test case to reproduce it and
! 65: # include the following information:
! 66: #
! 67: # host-triplet: $host
! 68: # shell: $SHELL
! 69: # compiler: $LTCC
! 70: # compiler flags: $LTCFLAGS
! 71: # linker: $LD (gnu? $with_gnu_ld)
! 72: # $progname: (GNU libtool) 2.4 Debian-2.4-2ubuntu1
! 73: # automake: $automake_version
! 74: # autoconf: $autoconf_version
! 75: #
! 76: # Report bugs to <bug-libtool@gnu.org>.
! 77: # GNU libtool home page: <http://www.gnu.org/software/libtool/>.
! 78: # General help using GNU software: <http://www.gnu.org/gethelp/>.
! 79:
! 80: PROGRAM=libtool
! 81: PACKAGE=libtool
! 82: VERSION="2.4 Debian-2.4-2ubuntu1"
! 83: TIMESTAMP=""
! 84: package_revision=1.3293
! 85:
! 86: # Be Bourne compatible
! 87: if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
! 88: emulate sh
! 89: NULLCMD=:
! 90: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
! 91: # is contrary to our usage. Disable this feature.
! 92: alias -g '${1+"$@"}'='"$@"'
! 93: setopt NO_GLOB_SUBST
! 94: else
! 95: case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
! 96: fi
! 97: BIN_SH=xpg4; export BIN_SH # for Tru64
! 98: DUALCASE=1; export DUALCASE # for MKS sh
! 99:
! 100: # A function that is used when there is no print builtin or printf.
! 101: func_fallback_echo ()
! 102: {
! 103: eval 'cat <<_LTECHO_EOF
! 104: $1
! 105: _LTECHO_EOF'
! 106: }
! 107:
! 108: # NLS nuisances: We save the old values to restore during execute mode.
! 109: lt_user_locale=
! 110: lt_safe_locale=
! 111: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
! 112: do
! 113: eval "if test \"\${$lt_var+set}\" = set; then
! 114: save_$lt_var=\$$lt_var
! 115: $lt_var=C
! 116: export $lt_var
! 117: lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
! 118: lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
! 119: fi"
! 120: done
! 121: LC_ALL=C
! 122: LANGUAGE=C
! 123: export LANGUAGE LC_ALL
! 124:
! 125: $lt_unset CDPATH
! 126:
! 127:
! 128: # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
! 129: # is ksh but when the shell is invoked as "sh" and the current value of
! 130: # the _XPG environment variable is not equal to 1 (one), the special
! 131: # positional parameter $0, within a function call, is the name of the
! 132: # function.
! 133: progpath="$0"
! 134:
! 135:
! 136:
! 137: : ${CP="cp -f"}
! 138: test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
! 139: : ${EGREP="/bin/grep -E"}
! 140: : ${FGREP="/bin/grep -F"}
! 141: : ${GREP="/bin/grep"}
! 142: : ${LN_S="ln -s"}
! 143: : ${MAKE="make"}
! 144: : ${MKDIR="mkdir"}
! 145: : ${MV="mv -f"}
! 146: : ${RM="rm -f"}
! 147: : ${SED="/bin/sed"}
! 148: : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
! 149: : ${Xsed="$SED -e 1s/^X//"}
! 150:
! 151: # Global variables:
! 152: EXIT_SUCCESS=0
! 153: EXIT_FAILURE=1
! 154: EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
! 155: EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
! 156:
! 157: exit_status=$EXIT_SUCCESS
! 158:
! 159: # Make sure IFS has a sensible default
! 160: lt_nl='
! 161: '
! 162: IFS=" $lt_nl"
! 163:
! 164: dirname="s,/[^/]*$,,"
! 165: basename="s,^.*/,,"
! 166:
! 167: # func_dirname file append nondir_replacement
! 168: # Compute the dirname of FILE. If nonempty, add APPEND to the result,
! 169: # otherwise set result to NONDIR_REPLACEMENT.
! 170: func_dirname ()
! 171: {
! 172: func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
! 173: if test "X$func_dirname_result" = "X${1}"; then
! 174: func_dirname_result="${3}"
! 175: else
! 176: func_dirname_result="$func_dirname_result${2}"
! 177: fi
! 178: } # func_dirname may be replaced by extended shell implementation
! 179:
! 180:
! 181: # func_basename file
! 182: func_basename ()
! 183: {
! 184: func_basename_result=`$ECHO "${1}" | $SED "$basename"`
! 185: } # func_basename may be replaced by extended shell implementation
! 186:
! 187:
! 188: # func_dirname_and_basename file append nondir_replacement
! 189: # perform func_basename and func_dirname in a single function
! 190: # call:
! 191: # dirname: Compute the dirname of FILE. If nonempty,
! 192: # add APPEND to the result, otherwise set result
! 193: # to NONDIR_REPLACEMENT.
! 194: # value returned in "$func_dirname_result"
! 195: # basename: Compute filename of FILE.
! 196: # value retuned in "$func_basename_result"
! 197: # Implementation must be kept synchronized with func_dirname
! 198: # and func_basename. For efficiency, we do not delegate to
! 199: # those functions but instead duplicate the functionality here.
! 200: func_dirname_and_basename ()
! 201: {
! 202: # Extract subdirectory from the argument.
! 203: func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
! 204: if test "X$func_dirname_result" = "X${1}"; then
! 205: func_dirname_result="${3}"
! 206: else
! 207: func_dirname_result="$func_dirname_result${2}"
! 208: fi
! 209: func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
! 210: } # func_dirname_and_basename may be replaced by extended shell implementation
! 211:
! 212:
! 213: # func_stripname prefix suffix name
! 214: # strip PREFIX and SUFFIX off of NAME.
! 215: # PREFIX and SUFFIX must not contain globbing or regex special
! 216: # characters, hashes, percent signs, but SUFFIX may contain a leading
! 217: # dot (in which case that matches only a dot).
! 218: # func_strip_suffix prefix name
! 219: func_stripname ()
! 220: {
! 221: case ${2} in
! 222: .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
! 223: *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
! 224: esac
! 225: } # func_stripname may be replaced by extended shell implementation
! 226:
! 227:
! 228: # These SED scripts presuppose an absolute path with a trailing slash.
! 229: pathcar='s,^/\([^/]*\).*$,\1,'
! 230: pathcdr='s,^/[^/]*,,'
! 231: removedotparts=':dotsl
! 232: s@/\./@/@g
! 233: t dotsl
! 234: s,/\.$,/,'
! 235: collapseslashes='s@/\{1,\}@/@g'
! 236: finalslash='s,/*$,/,'
! 237:
! 238: # func_normal_abspath PATH
! 239: # Remove doubled-up and trailing slashes, "." path components,
! 240: # and cancel out any ".." path components in PATH after making
! 241: # it an absolute path.
! 242: # value returned in "$func_normal_abspath_result"
! 243: func_normal_abspath ()
! 244: {
! 245: # Start from root dir and reassemble the path.
! 246: func_normal_abspath_result=
! 247: func_normal_abspath_tpath=$1
! 248: func_normal_abspath_altnamespace=
! 249: case $func_normal_abspath_tpath in
! 250: "")
! 251: # Empty path, that just means $cwd.
! 252: func_stripname '' '/' "`pwd`"
! 253: func_normal_abspath_result=$func_stripname_result
! 254: return
! 255: ;;
! 256: # The next three entries are used to spot a run of precisely
! 257: # two leading slashes without using negated character classes;
! 258: # we take advantage of case's first-match behaviour.
! 259: ///*)
! 260: # Unusual form of absolute path, do nothing.
! 261: ;;
! 262: //*)
! 263: # Not necessarily an ordinary path; POSIX reserves leading '//'
! 264: # and for example Cygwin uses it to access remote file shares
! 265: # over CIFS/SMB, so we conserve a leading double slash if found.
! 266: func_normal_abspath_altnamespace=/
! 267: ;;
! 268: /*)
! 269: # Absolute path, do nothing.
! 270: ;;
! 271: *)
! 272: # Relative path, prepend $cwd.
! 273: func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
! 274: ;;
! 275: esac
! 276: # Cancel out all the simple stuff to save iterations. We also want
! 277: # the path to end with a slash for ease of parsing, so make sure
! 278: # there is one (and only one) here.
! 279: func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
! 280: -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
! 281: while :; do
! 282: # Processed it all yet?
! 283: if test "$func_normal_abspath_tpath" = / ; then
! 284: # If we ascended to the root using ".." the result may be empty now.
! 285: if test -z "$func_normal_abspath_result" ; then
! 286: func_normal_abspath_result=/
! 287: fi
! 288: break
! 289: fi
! 290: func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
! 291: -e "$pathcar"`
! 292: func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
! 293: -e "$pathcdr"`
! 294: # Figure out what to do with it
! 295: case $func_normal_abspath_tcomponent in
! 296: "")
! 297: # Trailing empty path component, ignore it.
! 298: ;;
! 299: ..)
! 300: # Parent dir; strip last assembled component from result.
! 301: func_dirname "$func_normal_abspath_result"
! 302: func_normal_abspath_result=$func_dirname_result
! 303: ;;
! 304: *)
! 305: # Actual path component, append it.
! 306: func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
! 307: ;;
! 308: esac
! 309: done
! 310: # Restore leading double-slash if one was found on entry.
! 311: func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
! 312: }
! 313:
! 314: # func_relative_path SRCDIR DSTDIR
! 315: # generates a relative path from SRCDIR to DSTDIR, with a trailing
! 316: # slash if non-empty, suitable for immediately appending a filename
! 317: # without needing to append a separator.
! 318: # value returned in "$func_relative_path_result"
! 319: func_relative_path ()
! 320: {
! 321: func_relative_path_result=
! 322: func_normal_abspath "$1"
! 323: func_relative_path_tlibdir=$func_normal_abspath_result
! 324: func_normal_abspath "$2"
! 325: func_relative_path_tbindir=$func_normal_abspath_result
! 326:
! 327: # Ascend the tree starting from libdir
! 328: while :; do
! 329: # check if we have found a prefix of bindir
! 330: case $func_relative_path_tbindir in
! 331: $func_relative_path_tlibdir)
! 332: # found an exact match
! 333: func_relative_path_tcancelled=
! 334: break
! 335: ;;
! 336: $func_relative_path_tlibdir*)
! 337: # found a matching prefix
! 338: func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
! 339: func_relative_path_tcancelled=$func_stripname_result
! 340: if test -z "$func_relative_path_result"; then
! 341: func_relative_path_result=.
! 342: fi
! 343: break
! 344: ;;
! 345: *)
! 346: func_dirname $func_relative_path_tlibdir
! 347: func_relative_path_tlibdir=${func_dirname_result}
! 348: if test "x$func_relative_path_tlibdir" = x ; then
! 349: # Have to descend all the way to the root!
! 350: func_relative_path_result=../$func_relative_path_result
! 351: func_relative_path_tcancelled=$func_relative_path_tbindir
! 352: break
! 353: fi
! 354: func_relative_path_result=../$func_relative_path_result
! 355: ;;
! 356: esac
! 357: done
! 358:
! 359: # Now calculate path; take care to avoid doubling-up slashes.
! 360: func_stripname '' '/' "$func_relative_path_result"
! 361: func_relative_path_result=$func_stripname_result
! 362: func_stripname '/' '/' "$func_relative_path_tcancelled"
! 363: if test "x$func_stripname_result" != x ; then
! 364: func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
! 365: fi
! 366:
! 367: # Normalisation. If bindir is libdir, return empty string,
! 368: # else relative path ending with a slash; either way, target
! 369: # file name can be directly appended.
! 370: if test ! -z "$func_relative_path_result"; then
! 371: func_stripname './' '' "$func_relative_path_result/"
! 372: func_relative_path_result=$func_stripname_result
! 373: fi
! 374: }
! 375:
! 376: # The name of this program:
! 377: func_dirname_and_basename "$progpath"
! 378: progname=$func_basename_result
! 379:
! 380: # Make sure we have an absolute path for reexecution:
! 381: case $progpath in
! 382: [\\/]*|[A-Za-z]:\\*) ;;
! 383: *[\\/]*)
! 384: progdir=$func_dirname_result
! 385: progdir=`cd "$progdir" && pwd`
! 386: progpath="$progdir/$progname"
! 387: ;;
! 388: *)
! 389: save_IFS="$IFS"
! 390: IFS=:
! 391: for progdir in $PATH; do
! 392: IFS="$save_IFS"
! 393: test -x "$progdir/$progname" && break
! 394: done
! 395: IFS="$save_IFS"
! 396: test -n "$progdir" || progdir=`pwd`
! 397: progpath="$progdir/$progname"
! 398: ;;
! 399: esac
! 400:
! 401: # Sed substitution that helps us do robust quoting. It backslashifies
! 402: # metacharacters that are still active within double-quoted strings.
! 403: Xsed="${SED}"' -e 1s/^X//'
! 404: sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
! 405:
! 406: # Same as above, but do not quote variable references.
! 407: double_quote_subst='s/\(["`\\]\)/\\\1/g'
! 408:
! 409: # Sed substitution that turns a string into a regex matching for the
! 410: # string literally.
! 411: sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
! 412:
! 413: # Sed substitution that converts a w32 file name or path
! 414: # which contains forward slashes, into one that contains
! 415: # (escaped) backslashes. A very naive implementation.
! 416: lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
! 417:
! 418: # Re-`\' parameter expansions in output of double_quote_subst that were
! 419: # `\'-ed in input to the same. If an odd number of `\' preceded a '$'
! 420: # in input to double_quote_subst, that '$' was protected from expansion.
! 421: # Since each input `\' is now two `\'s, look for any number of runs of
! 422: # four `\'s followed by two `\'s and then a '$'. `\' that '$'.
! 423: bs='\\'
! 424: bs2='\\\\'
! 425: bs4='\\\\\\\\'
! 426: dollar='\$'
! 427: sed_double_backslash="\
! 428: s/$bs4/&\\
! 429: /g
! 430: s/^$bs2$dollar/$bs&/
! 431: s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
! 432: s/\n//g"
! 433:
! 434: # Standard options:
! 435: opt_dry_run=false
! 436: opt_help=false
! 437: opt_quiet=false
! 438: opt_verbose=false
! 439: opt_warning=:
! 440:
! 441: # func_echo arg...
! 442: # Echo program name prefixed message, along with the current mode
! 443: # name if it has been set yet.
! 444: func_echo ()
! 445: {
! 446: $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
! 447: }
! 448:
! 449: # func_verbose arg...
! 450: # Echo program name prefixed message in verbose mode only.
! 451: func_verbose ()
! 452: {
! 453: $opt_verbose && func_echo ${1+"$@"}
! 454:
! 455: # A bug in bash halts the script if the last line of a function
! 456: # fails when set -e is in force, so we need another command to
! 457: # work around that:
! 458: :
! 459: }
! 460:
! 461: # func_echo_all arg...
! 462: # Invoke $ECHO with all args, space-separated.
! 463: func_echo_all ()
! 464: {
! 465: $ECHO "$*"
! 466: }
! 467:
! 468: # func_error arg...
! 469: # Echo program name prefixed message to standard error.
! 470: func_error ()
! 471: {
! 472: $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
! 473: }
! 474:
! 475: # func_warning arg...
! 476: # Echo program name prefixed warning message to standard error.
! 477: func_warning ()
! 478: {
! 479: $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
! 480:
! 481: # bash bug again:
! 482: :
! 483: }
! 484:
! 485: # func_fatal_error arg...
! 486: # Echo program name prefixed message to standard error, and exit.
! 487: func_fatal_error ()
! 488: {
! 489: func_error ${1+"$@"}
! 490: exit $EXIT_FAILURE
! 491: }
! 492:
! 493: # func_fatal_help arg...
! 494: # Echo program name prefixed message to standard error, followed by
! 495: # a help hint, and exit.
! 496: func_fatal_help ()
! 497: {
! 498: func_error ${1+"$@"}
! 499: func_fatal_error "$help"
! 500: }
! 501: help="Try \`$progname --help' for more information." ## default
! 502:
! 503:
! 504: # func_grep expression filename
! 505: # Check whether EXPRESSION matches any line of FILENAME, without output.
! 506: func_grep ()
! 507: {
! 508: $GREP "$1" "$2" >/dev/null 2>&1
! 509: }
! 510:
! 511:
! 512: # func_mkdir_p directory-path
! 513: # Make sure the entire path to DIRECTORY-PATH is available.
! 514: func_mkdir_p ()
! 515: {
! 516: my_directory_path="$1"
! 517: my_dir_list=
! 518:
! 519: if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
! 520:
! 521: # Protect directory names starting with `-'
! 522: case $my_directory_path in
! 523: -*) my_directory_path="./$my_directory_path" ;;
! 524: esac
! 525:
! 526: # While some portion of DIR does not yet exist...
! 527: while test ! -d "$my_directory_path"; do
! 528: # ...make a list in topmost first order. Use a colon delimited
! 529: # list incase some portion of path contains whitespace.
! 530: my_dir_list="$my_directory_path:$my_dir_list"
! 531:
! 532: # If the last portion added has no slash in it, the list is done
! 533: case $my_directory_path in */*) ;; *) break ;; esac
! 534:
! 535: # ...otherwise throw away the child directory and loop
! 536: my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
! 537: done
! 538: my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
! 539:
! 540: save_mkdir_p_IFS="$IFS"; IFS=':'
! 541: for my_dir in $my_dir_list; do
! 542: IFS="$save_mkdir_p_IFS"
! 543: # mkdir can fail with a `File exist' error if two processes
! 544: # try to create one of the directories concurrently. Don't
! 545: # stop in that case!
! 546: $MKDIR "$my_dir" 2>/dev/null || :
! 547: done
! 548: IFS="$save_mkdir_p_IFS"
! 549:
! 550: # Bail out if we (or some other process) failed to create a directory.
! 551: test -d "$my_directory_path" || \
! 552: func_fatal_error "Failed to create \`$1'"
! 553: fi
! 554: }
! 555:
! 556:
! 557: # func_mktempdir [string]
! 558: # Make a temporary directory that won't clash with other running
! 559: # libtool processes, and avoids race conditions if possible. If
! 560: # given, STRING is the basename for that directory.
! 561: func_mktempdir ()
! 562: {
! 563: my_template="${TMPDIR-/tmp}/${1-$progname}"
! 564:
! 565: if test "$opt_dry_run" = ":"; then
! 566: # Return a directory name, but don't create it in dry-run mode
! 567: my_tmpdir="${my_template}-$$"
! 568: else
! 569:
! 570: # If mktemp works, use that first and foremost
! 571: my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
! 572:
! 573: if test ! -d "$my_tmpdir"; then
! 574: # Failing that, at least try and use $RANDOM to avoid a race
! 575: my_tmpdir="${my_template}-${RANDOM-0}$$"
! 576:
! 577: save_mktempdir_umask=`umask`
! 578: umask 0077
! 579: $MKDIR "$my_tmpdir"
! 580: umask $save_mktempdir_umask
! 581: fi
! 582:
! 583: # If we're not in dry-run mode, bomb out on failure
! 584: test -d "$my_tmpdir" || \
! 585: func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
! 586: fi
! 587:
! 588: $ECHO "$my_tmpdir"
! 589: }
! 590:
! 591:
! 592: # func_quote_for_eval arg
! 593: # Aesthetically quote ARG to be evaled later.
! 594: # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
! 595: # is double-quoted, suitable for a subsequent eval, whereas
! 596: # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
! 597: # which are still active within double quotes backslashified.
! 598: func_quote_for_eval ()
! 599: {
! 600: case $1 in
! 601: *[\\\`\"\$]*)
! 602: func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
! 603: *)
! 604: func_quote_for_eval_unquoted_result="$1" ;;
! 605: esac
! 606:
! 607: case $func_quote_for_eval_unquoted_result in
! 608: # Double-quote args containing shell metacharacters to delay
! 609: # word splitting, command substitution and and variable
! 610: # expansion for a subsequent eval.
! 611: # Many Bourne shells cannot handle close brackets correctly
! 612: # in scan sets, so we specify it separately.
! 613: *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
! 614: func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
! 615: ;;
! 616: *)
! 617: func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
! 618: esac
! 619: }
! 620:
! 621:
! 622: # func_quote_for_expand arg
! 623: # Aesthetically quote ARG to be evaled later; same as above,
! 624: # but do not quote variable references.
! 625: func_quote_for_expand ()
! 626: {
! 627: case $1 in
! 628: *[\\\`\"]*)
! 629: my_arg=`$ECHO "$1" | $SED \
! 630: -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
! 631: *)
! 632: my_arg="$1" ;;
! 633: esac
! 634:
! 635: case $my_arg in
! 636: # Double-quote args containing shell metacharacters to delay
! 637: # word splitting and command substitution for a subsequent eval.
! 638: # Many Bourne shells cannot handle close brackets correctly
! 639: # in scan sets, so we specify it separately.
! 640: *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
! 641: my_arg="\"$my_arg\""
! 642: ;;
! 643: esac
! 644:
! 645: func_quote_for_expand_result="$my_arg"
! 646: }
! 647:
! 648:
! 649: # func_show_eval cmd [fail_exp]
! 650: # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
! 651: # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
! 652: # is given, then evaluate it.
! 653: func_show_eval ()
! 654: {
! 655: my_cmd="$1"
! 656: my_fail_exp="${2-:}"
! 657:
! 658: ${opt_silent-false} || {
! 659: func_quote_for_expand "$my_cmd"
! 660: eval "func_echo $func_quote_for_expand_result"
! 661: }
! 662:
! 663: if ${opt_dry_run-false}; then :; else
! 664: eval "$my_cmd"
! 665: my_status=$?
! 666: if test "$my_status" -eq 0; then :; else
! 667: eval "(exit $my_status); $my_fail_exp"
! 668: fi
! 669: fi
! 670: }
! 671:
! 672:
! 673: # func_show_eval_locale cmd [fail_exp]
! 674: # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
! 675: # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
! 676: # is given, then evaluate it. Use the saved locale for evaluation.
! 677: func_show_eval_locale ()
! 678: {
! 679: my_cmd="$1"
! 680: my_fail_exp="${2-:}"
! 681:
! 682: ${opt_silent-false} || {
! 683: func_quote_for_expand "$my_cmd"
! 684: eval "func_echo $func_quote_for_expand_result"
! 685: }
! 686:
! 687: if ${opt_dry_run-false}; then :; else
! 688: eval "$lt_user_locale
! 689: $my_cmd"
! 690: my_status=$?
! 691: eval "$lt_safe_locale"
! 692: if test "$my_status" -eq 0; then :; else
! 693: eval "(exit $my_status); $my_fail_exp"
! 694: fi
! 695: fi
! 696: }
! 697:
! 698: # func_tr_sh
! 699: # Turn $1 into a string suitable for a shell variable name.
! 700: # Result is stored in $func_tr_sh_result. All characters
! 701: # not in the set a-zA-Z0-9_ are replaced with '_'. Further,
! 702: # if $1 begins with a digit, a '_' is prepended as well.
! 703: func_tr_sh ()
! 704: {
! 705: case $1 in
! 706: [0-9]* | *[!a-zA-Z0-9_]*)
! 707: func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
! 708: ;;
! 709: * )
! 710: func_tr_sh_result=$1
! 711: ;;
! 712: esac
! 713: }
! 714:
! 715:
! 716: # func_version
! 717: # Echo version message to standard output and exit.
! 718: func_version ()
! 719: {
! 720: $opt_debug
! 721:
! 722: $SED -n '/(C)/!b go
! 723: :more
! 724: /\./!{
! 725: N
! 726: s/\n# / /
! 727: b more
! 728: }
! 729: :go
! 730: /^# '$PROGRAM' (GNU /,/# warranty; / {
! 731: s/^# //
! 732: s/^# *$//
! 733: s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
! 734: p
! 735: }' < "$progpath"
! 736: exit $?
! 737: }
! 738:
! 739: # func_usage
! 740: # Echo short help message to standard output and exit.
! 741: func_usage ()
! 742: {
! 743: $opt_debug
! 744:
! 745: $SED -n '/^# Usage:/,/^# *.*--help/ {
! 746: s/^# //
! 747: s/^# *$//
! 748: s/\$progname/'$progname'/
! 749: p
! 750: }' < "$progpath"
! 751: echo
! 752: $ECHO "run \`$progname --help | more' for full usage"
! 753: exit $?
! 754: }
! 755:
! 756: # func_help [NOEXIT]
! 757: # Echo long help message to standard output and exit,
! 758: # unless 'noexit' is passed as argument.
! 759: func_help ()
! 760: {
! 761: $opt_debug
! 762:
! 763: $SED -n '/^# Usage:/,/# Report bugs to/ {
! 764: :print
! 765: s/^# //
! 766: s/^# *$//
! 767: s*\$progname*'$progname'*
! 768: s*\$host*'"$host"'*
! 769: s*\$SHELL*'"$SHELL"'*
! 770: s*\$LTCC*'"$LTCC"'*
! 771: s*\$LTCFLAGS*'"$LTCFLAGS"'*
! 772: s*\$LD*'"$LD"'*
! 773: s/\$with_gnu_ld/'"$with_gnu_ld"'/
! 774: s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
! 775: s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
! 776: p
! 777: d
! 778: }
! 779: /^# .* home page:/b print
! 780: /^# General help using/b print
! 781: ' < "$progpath"
! 782: ret=$?
! 783: if test -z "$1"; then
! 784: exit $ret
! 785: fi
! 786: }
! 787:
! 788: # func_missing_arg argname
! 789: # Echo program name prefixed message to standard error and set global
! 790: # exit_cmd.
! 791: func_missing_arg ()
! 792: {
! 793: $opt_debug
! 794:
! 795: func_error "missing argument for $1."
! 796: exit_cmd=exit
! 797: }
! 798:
! 799:
! 800: # func_split_short_opt shortopt
! 801: # Set func_split_short_opt_name and func_split_short_opt_arg shell
! 802: # variables after splitting SHORTOPT after the 2nd character.
! 803: func_split_short_opt ()
! 804: {
! 805: my_sed_short_opt='1s/^\(..\).*$/\1/;q'
! 806: my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
! 807:
! 808: func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
! 809: func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
! 810: } # func_split_short_opt may be replaced by extended shell implementation
! 811:
! 812:
! 813: # func_split_long_opt longopt
! 814: # Set func_split_long_opt_name and func_split_long_opt_arg shell
! 815: # variables after splitting LONGOPT at the `=' sign.
! 816: func_split_long_opt ()
! 817: {
! 818: my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
! 819: my_sed_long_arg='1s/^--[^=]*=//'
! 820:
! 821: func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
! 822: func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
! 823: } # func_split_long_opt may be replaced by extended shell implementation
! 824:
! 825: exit_cmd=:
! 826:
! 827:
! 828:
! 829:
! 830:
! 831: magic="%%%MAGIC variable%%%"
! 832: magic_exe="%%%MAGIC EXE variable%%%"
! 833:
! 834: # Global variables.
! 835: nonopt=
! 836: preserve_args=
! 837: lo2o="s/\\.lo\$/.${objext}/"
! 838: o2lo="s/\\.${objext}\$/.lo/"
! 839: extracted_archives=
! 840: extracted_serial=0
! 841:
! 842: # If this variable is set in any of the actions, the command in it
! 843: # will be execed at the end. This prevents here-documents from being
! 844: # left over by shells.
! 845: exec_cmd=
! 846:
! 847: # func_append var value
! 848: # Append VALUE to the end of shell variable VAR.
! 849: func_append ()
! 850: {
! 851: eval "${1}=\$${1}\${2}"
! 852: } # func_append may be replaced by extended shell implementation
! 853:
! 854: # func_append_quoted var value
! 855: # Quote VALUE and append to the end of shell variable VAR, separated
! 856: # by a space.
! 857: func_append_quoted ()
! 858: {
! 859: func_quote_for_eval "${2}"
! 860: eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
! 861: } # func_append_quoted may be replaced by extended shell implementation
! 862:
! 863:
! 864: # func_arith arithmetic-term...
! 865: func_arith ()
! 866: {
! 867: func_arith_result=`expr "${@}"`
! 868: } # func_arith may be replaced by extended shell implementation
! 869:
! 870:
! 871: # func_len string
! 872: # STRING may not start with a hyphen.
! 873: func_len ()
! 874: {
! 875: func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
! 876: } # func_len may be replaced by extended shell implementation
! 877:
! 878:
! 879: # func_lo2o object
! 880: func_lo2o ()
! 881: {
! 882: func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
! 883: } # func_lo2o may be replaced by extended shell implementation
! 884:
! 885:
! 886: # func_xform libobj-or-source
! 887: func_xform ()
! 888: {
! 889: func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
! 890: } # func_xform may be replaced by extended shell implementation
! 891:
! 892:
! 893: # func_fatal_configuration arg...
! 894: # Echo program name prefixed message to standard error, followed by
! 895: # a configuration failure hint, and exit.
! 896: func_fatal_configuration ()
! 897: {
! 898: func_error ${1+"$@"}
! 899: func_error "See the $PACKAGE documentation for more information."
! 900: func_fatal_error "Fatal configuration error."
! 901: }
! 902:
! 903:
! 904: # func_config
! 905: # Display the configuration for all the tags in this script.
! 906: func_config ()
! 907: {
! 908: re_begincf='^# ### BEGIN LIBTOOL'
! 909: re_endcf='^# ### END LIBTOOL'
! 910:
! 911: # Default configuration.
! 912: $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
! 913:
! 914: # Now print the configurations for the tags.
! 915: for tagname in $taglist; do
! 916: $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
! 917: done
! 918:
! 919: exit $?
! 920: }
! 921:
! 922: # func_features
! 923: # Display the features supported by this script.
! 924: func_features ()
! 925: {
! 926: echo "host: $host"
! 927: if test "$build_libtool_libs" = yes; then
! 928: echo "enable shared libraries"
! 929: else
! 930: echo "disable shared libraries"
! 931: fi
! 932: if test "$build_old_libs" = yes; then
! 933: echo "enable static libraries"
! 934: else
! 935: echo "disable static libraries"
! 936: fi
! 937:
! 938: exit $?
! 939: }
! 940:
! 941: # func_enable_tag tagname
! 942: # Verify that TAGNAME is valid, and either flag an error and exit, or
! 943: # enable the TAGNAME tag. We also add TAGNAME to the global $taglist
! 944: # variable here.
! 945: func_enable_tag ()
! 946: {
! 947: # Global variable:
! 948: tagname="$1"
! 949:
! 950: re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
! 951: re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
! 952: sed_extractcf="/$re_begincf/,/$re_endcf/p"
! 953:
! 954: # Validate tagname.
! 955: case $tagname in
! 956: *[!-_A-Za-z0-9,/]*)
! 957: func_fatal_error "invalid tag name: $tagname"
! 958: ;;
! 959: esac
! 960:
! 961: # Don't test for the "default" C tag, as we know it's
! 962: # there but not specially marked.
! 963: case $tagname in
! 964: CC) ;;
! 965: *)
! 966: if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
! 967: taglist="$taglist $tagname"
! 968:
! 969: # Evaluate the configuration. Be careful to quote the path
! 970: # and the sed script, to avoid splitting on whitespace, but
! 971: # also don't use non-portable quotes within backquotes within
! 972: # quotes we have to do it in 2 steps:
! 973: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
! 974: eval "$extractedcf"
! 975: else
! 976: func_error "ignoring unknown tag $tagname"
! 977: fi
! 978: ;;
! 979: esac
! 980: }
! 981:
! 982: # func_check_version_match
! 983: # Ensure that we are using m4 macros, and libtool script from the same
! 984: # release of libtool.
! 985: func_check_version_match ()
! 986: {
! 987: if test "$package_revision" != "$macro_revision"; then
! 988: if test "$VERSION" != "$macro_version"; then
! 989: if test -z "$macro_version"; then
! 990: cat >&2 <<_LT_EOF
! 991: $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
! 992: $progname: definition of this LT_INIT comes from an older release.
! 993: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
! 994: $progname: and run autoconf again.
! 995: _LT_EOF
! 996: else
! 997: cat >&2 <<_LT_EOF
! 998: $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
! 999: $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
! 1000: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
! 1001: $progname: and run autoconf again.
! 1002: _LT_EOF
! 1003: fi
! 1004: else
! 1005: cat >&2 <<_LT_EOF
! 1006: $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
! 1007: $progname: but the definition of this LT_INIT comes from revision $macro_revision.
! 1008: $progname: You should recreate aclocal.m4 with macros from revision $package_revision
! 1009: $progname: of $PACKAGE $VERSION and run autoconf again.
! 1010: _LT_EOF
! 1011: fi
! 1012:
! 1013: exit $EXIT_MISMATCH
! 1014: fi
! 1015: }
! 1016:
! 1017:
! 1018: # Shorthand for --mode=foo, only valid as the first argument
! 1019: case $1 in
! 1020: clean|clea|cle|cl)
! 1021: shift; set dummy --mode clean ${1+"$@"}; shift
! 1022: ;;
! 1023: compile|compil|compi|comp|com|co|c)
! 1024: shift; set dummy --mode compile ${1+"$@"}; shift
! 1025: ;;
! 1026: execute|execut|execu|exec|exe|ex|e)
! 1027: shift; set dummy --mode execute ${1+"$@"}; shift
! 1028: ;;
! 1029: finish|finis|fini|fin|fi|f)
! 1030: shift; set dummy --mode finish ${1+"$@"}; shift
! 1031: ;;
! 1032: install|instal|insta|inst|ins|in|i)
! 1033: shift; set dummy --mode install ${1+"$@"}; shift
! 1034: ;;
! 1035: link|lin|li|l)
! 1036: shift; set dummy --mode link ${1+"$@"}; shift
! 1037: ;;
! 1038: uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
! 1039: shift; set dummy --mode uninstall ${1+"$@"}; shift
! 1040: ;;
! 1041: esac
! 1042:
! 1043:
! 1044:
! 1045: # Option defaults:
! 1046: opt_debug=:
! 1047: opt_dry_run=false
! 1048: opt_config=false
! 1049: opt_preserve_dup_deps=false
! 1050: opt_features=false
! 1051: opt_finish=false
! 1052: opt_help=false
! 1053: opt_help_all=false
! 1054: opt_silent=:
! 1055: opt_verbose=:
! 1056: opt_silent=false
! 1057: opt_verbose=false
! 1058:
! 1059:
! 1060: # Parse options once, thoroughly. This comes as soon as possible in the
! 1061: # script to make things like `--version' happen as quickly as we can.
! 1062: {
! 1063: # this just eases exit handling
! 1064: while test $# -gt 0; do
! 1065: opt="$1"
! 1066: shift
! 1067: case $opt in
! 1068: --debug|-x) opt_debug='set -x'
! 1069: func_echo "enabling shell trace mode"
! 1070: $opt_debug
! 1071: ;;
! 1072: --dry-run|--dryrun|-n)
! 1073: opt_dry_run=:
! 1074: ;;
! 1075: --config)
! 1076: opt_config=:
! 1077: func_config
! 1078: ;;
! 1079: --dlopen|-dlopen)
! 1080: optarg="$1"
! 1081: opt_dlopen="${opt_dlopen+$opt_dlopen
! 1082: }$optarg"
! 1083: shift
! 1084: ;;
! 1085: --preserve-dup-deps)
! 1086: opt_preserve_dup_deps=:
! 1087: ;;
! 1088: --features)
! 1089: opt_features=:
! 1090: func_features
! 1091: ;;
! 1092: --finish)
! 1093: opt_finish=:
! 1094: set dummy --mode finish ${1+"$@"}; shift
! 1095: ;;
! 1096: --help)
! 1097: opt_help=:
! 1098: ;;
! 1099: --help-all)
! 1100: opt_help_all=:
! 1101: opt_help=': help-all'
! 1102: ;;
! 1103: --mode)
! 1104: test $# = 0 && func_missing_arg $opt && break
! 1105: optarg="$1"
! 1106: opt_mode="$optarg"
! 1107: case $optarg in
! 1108: # Valid mode arguments:
! 1109: clean|compile|execute|finish|install|link|relink|uninstall) ;;
! 1110:
! 1111: # Catch anything else as an error
! 1112: *) func_error "invalid argument for $opt"
! 1113: exit_cmd=exit
! 1114: break
! 1115: ;;
! 1116: esac
! 1117: shift
! 1118: ;;
! 1119: --no-silent|--no-quiet)
! 1120: opt_silent=false
! 1121: func_append preserve_args " $opt"
! 1122: ;;
! 1123: --no-verbose)
! 1124: opt_verbose=false
! 1125: func_append preserve_args " $opt"
! 1126: ;;
! 1127: --silent|--quiet)
! 1128: opt_silent=:
! 1129: func_append preserve_args " $opt"
! 1130: opt_verbose=false
! 1131: ;;
! 1132: --verbose|-v)
! 1133: opt_verbose=:
! 1134: func_append preserve_args " $opt"
! 1135: opt_silent=false
! 1136: ;;
! 1137: --tag)
! 1138: test $# = 0 && func_missing_arg $opt && break
! 1139: optarg="$1"
! 1140: opt_tag="$optarg"
! 1141: func_append preserve_args " $opt $optarg"
! 1142: func_enable_tag "$optarg"
! 1143: shift
! 1144: ;;
! 1145:
! 1146: -\?|-h) func_usage ;;
! 1147: --help) func_help ;;
! 1148: --version) func_version ;;
! 1149:
! 1150: # Separate optargs to long options:
! 1151: --*=*)
! 1152: func_split_long_opt "$opt"
! 1153: set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
! 1154: shift
! 1155: ;;
! 1156:
! 1157: # Separate non-argument short options:
! 1158: -\?*|-h*|-n*|-v*)
! 1159: func_split_short_opt "$opt"
! 1160: set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
! 1161: shift
! 1162: ;;
! 1163:
! 1164: --) break ;;
! 1165: -*) func_fatal_help "unrecognized option \`$opt'" ;;
! 1166: *) set dummy "$opt" ${1+"$@"}; shift; break ;;
! 1167: esac
! 1168: done
! 1169:
! 1170: # Validate options:
! 1171:
! 1172: # save first non-option argument
! 1173: if test "$#" -gt 0; then
! 1174: nonopt="$opt"
! 1175: shift
! 1176: fi
! 1177:
! 1178: # preserve --debug
! 1179: test "$opt_debug" = : || func_append preserve_args " --debug"
! 1180:
! 1181: case $host in
! 1182: *cygwin* | *mingw* | *pw32* | *cegcc*)
! 1183: # don't eliminate duplications in $postdeps and $predeps
! 1184: opt_duplicate_compiler_generated_deps=:
! 1185: ;;
! 1186: *)
! 1187: opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
! 1188: ;;
! 1189: esac
! 1190:
! 1191: $opt_help || {
! 1192: # Sanity checks first:
! 1193: func_check_version_match
! 1194:
! 1195: if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
! 1196: func_fatal_configuration "not configured to build any kind of library"
! 1197: fi
! 1198:
! 1199: # Darwin sucks
! 1200: eval std_shrext=\"$shrext_cmds\"
! 1201:
! 1202: # Only execute mode is allowed to have -dlopen flags.
! 1203: if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
! 1204: func_error "unrecognized option \`-dlopen'"
! 1205: $ECHO "$help" 1>&2
! 1206: exit $EXIT_FAILURE
! 1207: fi
! 1208:
! 1209: # Change the help message to a mode-specific one.
! 1210: generic_help="$help"
! 1211: help="Try \`$progname --help --mode=$opt_mode' for more information."
! 1212: }
! 1213:
! 1214:
! 1215: # Bail if the options were screwed
! 1216: $exit_cmd $EXIT_FAILURE
! 1217: }
! 1218:
! 1219:
! 1220:
! 1221:
! 1222: ## ----------- ##
! 1223: ## Main. ##
! 1224: ## ----------- ##
! 1225:
! 1226: # func_lalib_p file
! 1227: # True iff FILE is a libtool `.la' library or `.lo' object file.
! 1228: # This function is only a basic sanity check; it will hardly flush out
! 1229: # determined imposters.
! 1230: func_lalib_p ()
! 1231: {
! 1232: test -f "$1" &&
! 1233: $SED -e 4q "$1" 2>/dev/null \
! 1234: | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
! 1235: }
! 1236:
! 1237: # func_lalib_unsafe_p file
! 1238: # True iff FILE is a libtool `.la' library or `.lo' object file.
! 1239: # This function implements the same check as func_lalib_p without
! 1240: # resorting to external programs. To this end, it redirects stdin and
! 1241: # closes it afterwards, without saving the original file descriptor.
! 1242: # As a safety measure, use it only where a negative result would be
! 1243: # fatal anyway. Works if `file' does not exist.
! 1244: func_lalib_unsafe_p ()
! 1245: {
! 1246: lalib_p=no
! 1247: if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
! 1248: for lalib_p_l in 1 2 3 4
! 1249: do
! 1250: read lalib_p_line
! 1251: case "$lalib_p_line" in
! 1252: \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
! 1253: esac
! 1254: done
! 1255: exec 0<&5 5<&-
! 1256: fi
! 1257: test "$lalib_p" = yes
! 1258: }
! 1259:
! 1260: # func_ltwrapper_script_p file
! 1261: # True iff FILE is a libtool wrapper script
! 1262: # This function is only a basic sanity check; it will hardly flush out
! 1263: # determined imposters.
! 1264: func_ltwrapper_script_p ()
! 1265: {
! 1266: func_lalib_p "$1"
! 1267: }
! 1268:
! 1269: # func_ltwrapper_executable_p file
! 1270: # True iff FILE is a libtool wrapper executable
! 1271: # This function is only a basic sanity check; it will hardly flush out
! 1272: # determined imposters.
! 1273: func_ltwrapper_executable_p ()
! 1274: {
! 1275: func_ltwrapper_exec_suffix=
! 1276: case $1 in
! 1277: *.exe) ;;
! 1278: *) func_ltwrapper_exec_suffix=.exe ;;
! 1279: esac
! 1280: $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
! 1281: }
! 1282:
! 1283: # func_ltwrapper_scriptname file
! 1284: # Assumes file is an ltwrapper_executable
! 1285: # uses $file to determine the appropriate filename for a
! 1286: # temporary ltwrapper_script.
! 1287: func_ltwrapper_scriptname ()
! 1288: {
! 1289: func_dirname_and_basename "$1" "" "."
! 1290: func_stripname '' '.exe' "$func_basename_result"
! 1291: func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
! 1292: }
! 1293:
! 1294: # func_ltwrapper_p file
! 1295: # True iff FILE is a libtool wrapper script or wrapper executable
! 1296: # This function is only a basic sanity check; it will hardly flush out
! 1297: # determined imposters.
! 1298: func_ltwrapper_p ()
! 1299: {
! 1300: func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
! 1301: }
! 1302:
! 1303:
! 1304: # func_execute_cmds commands fail_cmd
! 1305: # Execute tilde-delimited COMMANDS.
! 1306: # If FAIL_CMD is given, eval that upon failure.
! 1307: # FAIL_CMD may read-access the current command in variable CMD!
! 1308: func_execute_cmds ()
! 1309: {
! 1310: $opt_debug
! 1311: save_ifs=$IFS; IFS='~'
! 1312: for cmd in $1; do
! 1313: IFS=$save_ifs
! 1314: eval cmd=\"$cmd\"
! 1315: func_show_eval "$cmd" "${2-:}"
! 1316: done
! 1317: IFS=$save_ifs
! 1318: }
! 1319:
! 1320:
! 1321: # func_source file
! 1322: # Source FILE, adding directory component if necessary.
! 1323: # Note that it is not necessary on cygwin/mingw to append a dot to
! 1324: # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
! 1325: # behavior happens only for exec(3), not for open(2)! Also, sourcing
! 1326: # `FILE.' does not work on cygwin managed mounts.
! 1327: func_source ()
! 1328: {
! 1329: $opt_debug
! 1330: case $1 in
! 1331: */* | *\\*) . "$1" ;;
! 1332: *) . "./$1" ;;
! 1333: esac
! 1334: }
! 1335:
! 1336:
! 1337: # func_resolve_sysroot PATH
! 1338: # Replace a leading = in PATH with a sysroot. Store the result into
! 1339: # func_resolve_sysroot_result
! 1340: func_resolve_sysroot ()
! 1341: {
! 1342: func_resolve_sysroot_result=$1
! 1343: case $func_resolve_sysroot_result in
! 1344: =*)
! 1345: func_stripname '=' '' "$func_resolve_sysroot_result"
! 1346: func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
! 1347: ;;
! 1348: esac
! 1349: }
! 1350:
! 1351: # func_replace_sysroot PATH
! 1352: # If PATH begins with the sysroot, replace it with = and
! 1353: # store the result into func_replace_sysroot_result.
! 1354: func_replace_sysroot ()
! 1355: {
! 1356: case "$lt_sysroot:$1" in
! 1357: ?*:"$lt_sysroot"*)
! 1358: func_stripname "$lt_sysroot" '' "$1"
! 1359: func_replace_sysroot_result="=$func_stripname_result"
! 1360: ;;
! 1361: *)
! 1362: # Including no sysroot.
! 1363: func_replace_sysroot_result=$1
! 1364: ;;
! 1365: esac
! 1366: }
! 1367:
! 1368: # func_infer_tag arg
! 1369: # Infer tagged configuration to use if any are available and
! 1370: # if one wasn't chosen via the "--tag" command line option.
! 1371: # Only attempt this if the compiler in the base compile
! 1372: # command doesn't match the default compiler.
! 1373: # arg is usually of the form 'gcc ...'
! 1374: func_infer_tag ()
! 1375: {
! 1376: $opt_debug
! 1377: if test -n "$available_tags" && test -z "$tagname"; then
! 1378: CC_quoted=
! 1379: for arg in $CC; do
! 1380: func_append_quoted CC_quoted "$arg"
! 1381: done
! 1382: CC_expanded=`func_echo_all $CC`
! 1383: CC_quoted_expanded=`func_echo_all $CC_quoted`
! 1384: case $@ in
! 1385: # Blanks in the command may have been stripped by the calling shell,
! 1386: # but not from the CC environment variable when configure was run.
! 1387: " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
! 1388: " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
! 1389: # Blanks at the start of $base_compile will cause this to fail
! 1390: # if we don't check for them as well.
! 1391: *)
! 1392: for z in $available_tags; do
! 1393: if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
! 1394: # Evaluate the configuration.
! 1395: eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
! 1396: CC_quoted=
! 1397: for arg in $CC; do
! 1398: # Double-quote args containing other shell metacharacters.
! 1399: func_append_quoted CC_quoted "$arg"
! 1400: done
! 1401: CC_expanded=`func_echo_all $CC`
! 1402: CC_quoted_expanded=`func_echo_all $CC_quoted`
! 1403: case "$@ " in
! 1404: " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
! 1405: " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
! 1406: # The compiler in the base compile command matches
! 1407: # the one in the tagged configuration.
! 1408: # Assume this is the tagged configuration we want.
! 1409: tagname=$z
! 1410: break
! 1411: ;;
! 1412: esac
! 1413: fi
! 1414: done
! 1415: # If $tagname still isn't set, then no tagged configuration
! 1416: # was found and let the user know that the "--tag" command
! 1417: # line option must be used.
! 1418: if test -z "$tagname"; then
! 1419: func_echo "unable to infer tagged configuration"
! 1420: func_fatal_error "specify a tag with \`--tag'"
! 1421: # else
! 1422: # func_verbose "using $tagname tagged configuration"
! 1423: fi
! 1424: ;;
! 1425: esac
! 1426: fi
! 1427: }
! 1428:
! 1429:
! 1430:
! 1431: # func_write_libtool_object output_name pic_name nonpic_name
! 1432: # Create a libtool object file (analogous to a ".la" file),
! 1433: # but don't create it if we're doing a dry run.
! 1434: func_write_libtool_object ()
! 1435: {
! 1436: write_libobj=${1}
! 1437: if test "$build_libtool_libs" = yes; then
! 1438: write_lobj=\'${2}\'
! 1439: else
! 1440: write_lobj=none
! 1441: fi
! 1442:
! 1443: if test "$build_old_libs" = yes; then
! 1444: write_oldobj=\'${3}\'
! 1445: else
! 1446: write_oldobj=none
! 1447: fi
! 1448:
! 1449: $opt_dry_run || {
! 1450: cat >${write_libobj}T <<EOF
! 1451: # $write_libobj - a libtool object file
! 1452: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 1453: #
! 1454: # Please DO NOT delete this file!
! 1455: # It is necessary for linking the library.
! 1456:
! 1457: # Name of the PIC object.
! 1458: pic_object=$write_lobj
! 1459:
! 1460: # Name of the non-PIC object
! 1461: non_pic_object=$write_oldobj
! 1462:
! 1463: EOF
! 1464: $MV "${write_libobj}T" "${write_libobj}"
! 1465: }
! 1466: }
! 1467:
! 1468:
! 1469: ##################################################
! 1470: # FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
! 1471: ##################################################
! 1472:
! 1473: # func_convert_core_file_wine_to_w32 ARG
! 1474: # Helper function used by file name conversion functions when $build is *nix,
! 1475: # and $host is mingw, cygwin, or some other w32 environment. Relies on a
! 1476: # correctly configured wine environment available, with the winepath program
! 1477: # in $build's $PATH.
! 1478: #
! 1479: # ARG is the $build file name to be converted to w32 format.
! 1480: # Result is available in $func_convert_core_file_wine_to_w32_result, and will
! 1481: # be empty on error (or when ARG is empty)
! 1482: func_convert_core_file_wine_to_w32 ()
! 1483: {
! 1484: $opt_debug
! 1485: func_convert_core_file_wine_to_w32_result="$1"
! 1486: if test -n "$1"; then
! 1487: # Unfortunately, winepath does not exit with a non-zero error code, so we
! 1488: # are forced to check the contents of stdout. On the other hand, if the
! 1489: # command is not found, the shell will set an exit code of 127 and print
! 1490: # *an error message* to stdout. So we must check for both error code of
! 1491: # zero AND non-empty stdout, which explains the odd construction:
! 1492: func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
! 1493: if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
! 1494: func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
! 1495: $SED -e "$lt_sed_naive_backslashify"`
! 1496: else
! 1497: func_convert_core_file_wine_to_w32_result=
! 1498: fi
! 1499: fi
! 1500: }
! 1501: # end: func_convert_core_file_wine_to_w32
! 1502:
! 1503:
! 1504: # func_convert_core_path_wine_to_w32 ARG
! 1505: # Helper function used by path conversion functions when $build is *nix, and
! 1506: # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
! 1507: # configured wine environment available, with the winepath program in $build's
! 1508: # $PATH. Assumes ARG has no leading or trailing path separator characters.
! 1509: #
! 1510: # ARG is path to be converted from $build format to win32.
! 1511: # Result is available in $func_convert_core_path_wine_to_w32_result.
! 1512: # Unconvertible file (directory) names in ARG are skipped; if no directory names
! 1513: # are convertible, then the result may be empty.
! 1514: func_convert_core_path_wine_to_w32 ()
! 1515: {
! 1516: $opt_debug
! 1517: # unfortunately, winepath doesn't convert paths, only file names
! 1518: func_convert_core_path_wine_to_w32_result=""
! 1519: if test -n "$1"; then
! 1520: oldIFS=$IFS
! 1521: IFS=:
! 1522: for func_convert_core_path_wine_to_w32_f in $1; do
! 1523: IFS=$oldIFS
! 1524: func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
! 1525: if test -n "$func_convert_core_file_wine_to_w32_result" ; then
! 1526: if test -z "$func_convert_core_path_wine_to_w32_result"; then
! 1527: func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
! 1528: else
! 1529: func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
! 1530: fi
! 1531: fi
! 1532: done
! 1533: IFS=$oldIFS
! 1534: fi
! 1535: }
! 1536: # end: func_convert_core_path_wine_to_w32
! 1537:
! 1538:
! 1539: # func_cygpath ARGS...
! 1540: # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
! 1541: # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
! 1542: # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
! 1543: # (2), returns the Cygwin file name or path in func_cygpath_result (input
! 1544: # file name or path is assumed to be in w32 format, as previously converted
! 1545: # from $build's *nix or MSYS format). In case (3), returns the w32 file name
! 1546: # or path in func_cygpath_result (input file name or path is assumed to be in
! 1547: # Cygwin format). Returns an empty string on error.
! 1548: #
! 1549: # ARGS are passed to cygpath, with the last one being the file name or path to
! 1550: # be converted.
! 1551: #
! 1552: # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
! 1553: # environment variable; do not put it in $PATH.
! 1554: func_cygpath ()
! 1555: {
! 1556: $opt_debug
! 1557: if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
! 1558: func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
! 1559: if test "$?" -ne 0; then
! 1560: # on failure, ensure result is empty
! 1561: func_cygpath_result=
! 1562: fi
! 1563: else
! 1564: func_cygpath_result=
! 1565: func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
! 1566: fi
! 1567: }
! 1568: #end: func_cygpath
! 1569:
! 1570:
! 1571: # func_convert_core_msys_to_w32 ARG
! 1572: # Convert file name or path ARG from MSYS format to w32 format. Return
! 1573: # result in func_convert_core_msys_to_w32_result.
! 1574: func_convert_core_msys_to_w32 ()
! 1575: {
! 1576: $opt_debug
! 1577: # awkward: cmd appends spaces to result
! 1578: func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
! 1579: $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
! 1580: }
! 1581: #end: func_convert_core_msys_to_w32
! 1582:
! 1583:
! 1584: # func_convert_file_check ARG1 ARG2
! 1585: # Verify that ARG1 (a file name in $build format) was converted to $host
! 1586: # format in ARG2. Otherwise, emit an error message, but continue (resetting
! 1587: # func_to_host_file_result to ARG1).
! 1588: func_convert_file_check ()
! 1589: {
! 1590: $opt_debug
! 1591: if test -z "$2" && test -n "$1" ; then
! 1592: func_error "Could not determine host file name corresponding to"
! 1593: func_error " \`$1'"
! 1594: func_error "Continuing, but uninstalled executables may not work."
! 1595: # Fallback:
! 1596: func_to_host_file_result="$1"
! 1597: fi
! 1598: }
! 1599: # end func_convert_file_check
! 1600:
! 1601:
! 1602: # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
! 1603: # Verify that FROM_PATH (a path in $build format) was converted to $host
! 1604: # format in TO_PATH. Otherwise, emit an error message, but continue, resetting
! 1605: # func_to_host_file_result to a simplistic fallback value (see below).
! 1606: func_convert_path_check ()
! 1607: {
! 1608: $opt_debug
! 1609: if test -z "$4" && test -n "$3"; then
! 1610: func_error "Could not determine the host path corresponding to"
! 1611: func_error " \`$3'"
! 1612: func_error "Continuing, but uninstalled executables may not work."
! 1613: # Fallback. This is a deliberately simplistic "conversion" and
! 1614: # should not be "improved". See libtool.info.
! 1615: if test "x$1" != "x$2"; then
! 1616: lt_replace_pathsep_chars="s|$1|$2|g"
! 1617: func_to_host_path_result=`echo "$3" |
! 1618: $SED -e "$lt_replace_pathsep_chars"`
! 1619: else
! 1620: func_to_host_path_result="$3"
! 1621: fi
! 1622: fi
! 1623: }
! 1624: # end func_convert_path_check
! 1625:
! 1626:
! 1627: # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
! 1628: # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
! 1629: # and appending REPL if ORIG matches BACKPAT.
! 1630: func_convert_path_front_back_pathsep ()
! 1631: {
! 1632: $opt_debug
! 1633: case $4 in
! 1634: $1 ) func_to_host_path_result="$3$func_to_host_path_result"
! 1635: ;;
! 1636: esac
! 1637: case $4 in
! 1638: $2 ) func_append func_to_host_path_result "$3"
! 1639: ;;
! 1640: esac
! 1641: }
! 1642: # end func_convert_path_front_back_pathsep
! 1643:
! 1644:
! 1645: ##################################################
! 1646: # $build to $host FILE NAME CONVERSION FUNCTIONS #
! 1647: ##################################################
! 1648: # invoked via `$to_host_file_cmd ARG'
! 1649: #
! 1650: # In each case, ARG is the path to be converted from $build to $host format.
! 1651: # Result will be available in $func_to_host_file_result.
! 1652:
! 1653:
! 1654: # func_to_host_file ARG
! 1655: # Converts the file name ARG from $build format to $host format. Return result
! 1656: # in func_to_host_file_result.
! 1657: func_to_host_file ()
! 1658: {
! 1659: $opt_debug
! 1660: $to_host_file_cmd "$1"
! 1661: }
! 1662: # end func_to_host_file
! 1663:
! 1664:
! 1665: # func_to_tool_file ARG LAZY
! 1666: # converts the file name ARG from $build format to toolchain format. Return
! 1667: # result in func_to_tool_file_result. If the conversion in use is listed
! 1668: # in (the comma separated) LAZY, no conversion takes place.
! 1669: func_to_tool_file ()
! 1670: {
! 1671: $opt_debug
! 1672: case ,$2, in
! 1673: *,"$to_tool_file_cmd",*)
! 1674: func_to_tool_file_result=$1
! 1675: ;;
! 1676: *)
! 1677: $to_tool_file_cmd "$1"
! 1678: func_to_tool_file_result=$func_to_host_file_result
! 1679: ;;
! 1680: esac
! 1681: }
! 1682: # end func_to_tool_file
! 1683:
! 1684:
! 1685: # func_convert_file_noop ARG
! 1686: # Copy ARG to func_to_host_file_result.
! 1687: func_convert_file_noop ()
! 1688: {
! 1689: func_to_host_file_result="$1"
! 1690: }
! 1691: # end func_convert_file_noop
! 1692:
! 1693:
! 1694: # func_convert_file_msys_to_w32 ARG
! 1695: # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
! 1696: # conversion to w32 is not available inside the cwrapper. Returns result in
! 1697: # func_to_host_file_result.
! 1698: func_convert_file_msys_to_w32 ()
! 1699: {
! 1700: $opt_debug
! 1701: func_to_host_file_result="$1"
! 1702: if test -n "$1"; then
! 1703: func_convert_core_msys_to_w32 "$1"
! 1704: func_to_host_file_result="$func_convert_core_msys_to_w32_result"
! 1705: fi
! 1706: func_convert_file_check "$1" "$func_to_host_file_result"
! 1707: }
! 1708: # end func_convert_file_msys_to_w32
! 1709:
! 1710:
! 1711: # func_convert_file_cygwin_to_w32 ARG
! 1712: # Convert file name ARG from Cygwin to w32 format. Returns result in
! 1713: # func_to_host_file_result.
! 1714: func_convert_file_cygwin_to_w32 ()
! 1715: {
! 1716: $opt_debug
! 1717: func_to_host_file_result="$1"
! 1718: if test -n "$1"; then
! 1719: # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
! 1720: # LT_CYGPATH in this case.
! 1721: func_to_host_file_result=`cygpath -m "$1"`
! 1722: fi
! 1723: func_convert_file_check "$1" "$func_to_host_file_result"
! 1724: }
! 1725: # end func_convert_file_cygwin_to_w32
! 1726:
! 1727:
! 1728: # func_convert_file_nix_to_w32 ARG
! 1729: # Convert file name ARG from *nix to w32 format. Requires a wine environment
! 1730: # and a working winepath. Returns result in func_to_host_file_result.
! 1731: func_convert_file_nix_to_w32 ()
! 1732: {
! 1733: $opt_debug
! 1734: func_to_host_file_result="$1"
! 1735: if test -n "$1"; then
! 1736: func_convert_core_file_wine_to_w32 "$1"
! 1737: func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
! 1738: fi
! 1739: func_convert_file_check "$1" "$func_to_host_file_result"
! 1740: }
! 1741: # end func_convert_file_nix_to_w32
! 1742:
! 1743:
! 1744: # func_convert_file_msys_to_cygwin ARG
! 1745: # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
! 1746: # Returns result in func_to_host_file_result.
! 1747: func_convert_file_msys_to_cygwin ()
! 1748: {
! 1749: $opt_debug
! 1750: func_to_host_file_result="$1"
! 1751: if test -n "$1"; then
! 1752: func_convert_core_msys_to_w32 "$1"
! 1753: func_cygpath -u "$func_convert_core_msys_to_w32_result"
! 1754: func_to_host_file_result="$func_cygpath_result"
! 1755: fi
! 1756: func_convert_file_check "$1" "$func_to_host_file_result"
! 1757: }
! 1758: # end func_convert_file_msys_to_cygwin
! 1759:
! 1760:
! 1761: # func_convert_file_nix_to_cygwin ARG
! 1762: # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
! 1763: # in a wine environment, working winepath, and LT_CYGPATH set. Returns result
! 1764: # in func_to_host_file_result.
! 1765: func_convert_file_nix_to_cygwin ()
! 1766: {
! 1767: $opt_debug
! 1768: func_to_host_file_result="$1"
! 1769: if test -n "$1"; then
! 1770: # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
! 1771: func_convert_core_file_wine_to_w32 "$1"
! 1772: func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
! 1773: func_to_host_file_result="$func_cygpath_result"
! 1774: fi
! 1775: func_convert_file_check "$1" "$func_to_host_file_result"
! 1776: }
! 1777: # end func_convert_file_nix_to_cygwin
! 1778:
! 1779:
! 1780: #############################################
! 1781: # $build to $host PATH CONVERSION FUNCTIONS #
! 1782: #############################################
! 1783: # invoked via `$to_host_path_cmd ARG'
! 1784: #
! 1785: # In each case, ARG is the path to be converted from $build to $host format.
! 1786: # The result will be available in $func_to_host_path_result.
! 1787: #
! 1788: # Path separators are also converted from $build format to $host format. If
! 1789: # ARG begins or ends with a path separator character, it is preserved (but
! 1790: # converted to $host format) on output.
! 1791: #
! 1792: # All path conversion functions are named using the following convention:
! 1793: # file name conversion function : func_convert_file_X_to_Y ()
! 1794: # path conversion function : func_convert_path_X_to_Y ()
! 1795: # where, for any given $build/$host combination the 'X_to_Y' value is the
! 1796: # same. If conversion functions are added for new $build/$host combinations,
! 1797: # the two new functions must follow this pattern, or func_init_to_host_path_cmd
! 1798: # will break.
! 1799:
! 1800:
! 1801: # func_init_to_host_path_cmd
! 1802: # Ensures that function "pointer" variable $to_host_path_cmd is set to the
! 1803: # appropriate value, based on the value of $to_host_file_cmd.
! 1804: to_host_path_cmd=
! 1805: func_init_to_host_path_cmd ()
! 1806: {
! 1807: $opt_debug
! 1808: if test -z "$to_host_path_cmd"; then
! 1809: func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
! 1810: to_host_path_cmd="func_convert_path_${func_stripname_result}"
! 1811: fi
! 1812: }
! 1813:
! 1814:
! 1815: # func_to_host_path ARG
! 1816: # Converts the path ARG from $build format to $host format. Return result
! 1817: # in func_to_host_path_result.
! 1818: func_to_host_path ()
! 1819: {
! 1820: $opt_debug
! 1821: func_init_to_host_path_cmd
! 1822: $to_host_path_cmd "$1"
! 1823: }
! 1824: # end func_to_host_path
! 1825:
! 1826:
! 1827: # func_convert_path_noop ARG
! 1828: # Copy ARG to func_to_host_path_result.
! 1829: func_convert_path_noop ()
! 1830: {
! 1831: func_to_host_path_result="$1"
! 1832: }
! 1833: # end func_convert_path_noop
! 1834:
! 1835:
! 1836: # func_convert_path_msys_to_w32 ARG
! 1837: # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
! 1838: # conversion to w32 is not available inside the cwrapper. Returns result in
! 1839: # func_to_host_path_result.
! 1840: func_convert_path_msys_to_w32 ()
! 1841: {
! 1842: $opt_debug
! 1843: func_to_host_path_result="$1"
! 1844: if test -n "$1"; then
! 1845: # Remove leading and trailing path separator characters from ARG. MSYS
! 1846: # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
! 1847: # and winepath ignores them completely.
! 1848: func_stripname : : "$1"
! 1849: func_to_host_path_tmp1=$func_stripname_result
! 1850: func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
! 1851: func_to_host_path_result="$func_convert_core_msys_to_w32_result"
! 1852: func_convert_path_check : ";" \
! 1853: "$func_to_host_path_tmp1" "$func_to_host_path_result"
! 1854: func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
! 1855: fi
! 1856: }
! 1857: # end func_convert_path_msys_to_w32
! 1858:
! 1859:
! 1860: # func_convert_path_cygwin_to_w32 ARG
! 1861: # Convert path ARG from Cygwin to w32 format. Returns result in
! 1862: # func_to_host_file_result.
! 1863: func_convert_path_cygwin_to_w32 ()
! 1864: {
! 1865: $opt_debug
! 1866: func_to_host_path_result="$1"
! 1867: if test -n "$1"; then
! 1868: # See func_convert_path_msys_to_w32:
! 1869: func_stripname : : "$1"
! 1870: func_to_host_path_tmp1=$func_stripname_result
! 1871: func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
! 1872: func_convert_path_check : ";" \
! 1873: "$func_to_host_path_tmp1" "$func_to_host_path_result"
! 1874: func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
! 1875: fi
! 1876: }
! 1877: # end func_convert_path_cygwin_to_w32
! 1878:
! 1879:
! 1880: # func_convert_path_nix_to_w32 ARG
! 1881: # Convert path ARG from *nix to w32 format. Requires a wine environment and
! 1882: # a working winepath. Returns result in func_to_host_file_result.
! 1883: func_convert_path_nix_to_w32 ()
! 1884: {
! 1885: $opt_debug
! 1886: func_to_host_path_result="$1"
! 1887: if test -n "$1"; then
! 1888: # See func_convert_path_msys_to_w32:
! 1889: func_stripname : : "$1"
! 1890: func_to_host_path_tmp1=$func_stripname_result
! 1891: func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
! 1892: func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
! 1893: func_convert_path_check : ";" \
! 1894: "$func_to_host_path_tmp1" "$func_to_host_path_result"
! 1895: func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
! 1896: fi
! 1897: }
! 1898: # end func_convert_path_nix_to_w32
! 1899:
! 1900:
! 1901: # func_convert_path_msys_to_cygwin ARG
! 1902: # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
! 1903: # Returns result in func_to_host_file_result.
! 1904: func_convert_path_msys_to_cygwin ()
! 1905: {
! 1906: $opt_debug
! 1907: func_to_host_path_result="$1"
! 1908: if test -n "$1"; then
! 1909: # See func_convert_path_msys_to_w32:
! 1910: func_stripname : : "$1"
! 1911: func_to_host_path_tmp1=$func_stripname_result
! 1912: func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
! 1913: func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
! 1914: func_to_host_path_result="$func_cygpath_result"
! 1915: func_convert_path_check : : \
! 1916: "$func_to_host_path_tmp1" "$func_to_host_path_result"
! 1917: func_convert_path_front_back_pathsep ":*" "*:" : "$1"
! 1918: fi
! 1919: }
! 1920: # end func_convert_path_msys_to_cygwin
! 1921:
! 1922:
! 1923: # func_convert_path_nix_to_cygwin ARG
! 1924: # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
! 1925: # a wine environment, working winepath, and LT_CYGPATH set. Returns result in
! 1926: # func_to_host_file_result.
! 1927: func_convert_path_nix_to_cygwin ()
! 1928: {
! 1929: $opt_debug
! 1930: func_to_host_path_result="$1"
! 1931: if test -n "$1"; then
! 1932: # Remove leading and trailing path separator characters from
! 1933: # ARG. msys behavior is inconsistent here, cygpath turns them
! 1934: # into '.;' and ';.', and winepath ignores them completely.
! 1935: func_stripname : : "$1"
! 1936: func_to_host_path_tmp1=$func_stripname_result
! 1937: func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
! 1938: func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
! 1939: func_to_host_path_result="$func_cygpath_result"
! 1940: func_convert_path_check : : \
! 1941: "$func_to_host_path_tmp1" "$func_to_host_path_result"
! 1942: func_convert_path_front_back_pathsep ":*" "*:" : "$1"
! 1943: fi
! 1944: }
! 1945: # end func_convert_path_nix_to_cygwin
! 1946:
! 1947:
! 1948: # func_mode_compile arg...
! 1949: func_mode_compile ()
! 1950: {
! 1951: $opt_debug
! 1952: # Get the compilation command and the source file.
! 1953: base_compile=
! 1954: srcfile="$nonopt" # always keep a non-empty value in "srcfile"
! 1955: suppress_opt=yes
! 1956: suppress_output=
! 1957: arg_mode=normal
! 1958: libobj=
! 1959: later=
! 1960: pie_flag=
! 1961:
! 1962: for arg
! 1963: do
! 1964: case $arg_mode in
! 1965: arg )
! 1966: # do not "continue". Instead, add this to base_compile
! 1967: lastarg="$arg"
! 1968: arg_mode=normal
! 1969: ;;
! 1970:
! 1971: target )
! 1972: libobj="$arg"
! 1973: arg_mode=normal
! 1974: continue
! 1975: ;;
! 1976:
! 1977: normal )
! 1978: # Accept any command-line options.
! 1979: case $arg in
! 1980: -o)
! 1981: test -n "$libobj" && \
! 1982: func_fatal_error "you cannot specify \`-o' more than once"
! 1983: arg_mode=target
! 1984: continue
! 1985: ;;
! 1986:
! 1987: -pie | -fpie | -fPIE)
! 1988: func_append pie_flag " $arg"
! 1989: continue
! 1990: ;;
! 1991:
! 1992: -shared | -static | -prefer-pic | -prefer-non-pic)
! 1993: func_append later " $arg"
! 1994: continue
! 1995: ;;
! 1996:
! 1997: -no-suppress)
! 1998: suppress_opt=no
! 1999: continue
! 2000: ;;
! 2001:
! 2002: -Xcompiler)
! 2003: arg_mode=arg # the next one goes into the "base_compile" arg list
! 2004: continue # The current "srcfile" will either be retained or
! 2005: ;; # replaced later. I would guess that would be a bug.
! 2006:
! 2007: -Wc,*)
! 2008: func_stripname '-Wc,' '' "$arg"
! 2009: args=$func_stripname_result
! 2010: lastarg=
! 2011: save_ifs="$IFS"; IFS=','
! 2012: for arg in $args; do
! 2013: IFS="$save_ifs"
! 2014: func_append_quoted lastarg "$arg"
! 2015: done
! 2016: IFS="$save_ifs"
! 2017: func_stripname ' ' '' "$lastarg"
! 2018: lastarg=$func_stripname_result
! 2019:
! 2020: # Add the arguments to base_compile.
! 2021: func_append base_compile " $lastarg"
! 2022: continue
! 2023: ;;
! 2024:
! 2025: *)
! 2026: # Accept the current argument as the source file.
! 2027: # The previous "srcfile" becomes the current argument.
! 2028: #
! 2029: lastarg="$srcfile"
! 2030: srcfile="$arg"
! 2031: ;;
! 2032: esac # case $arg
! 2033: ;;
! 2034: esac # case $arg_mode
! 2035:
! 2036: # Aesthetically quote the previous argument.
! 2037: func_append_quoted base_compile "$lastarg"
! 2038: done # for arg
! 2039:
! 2040: case $arg_mode in
! 2041: arg)
! 2042: func_fatal_error "you must specify an argument for -Xcompile"
! 2043: ;;
! 2044: target)
! 2045: func_fatal_error "you must specify a target with \`-o'"
! 2046: ;;
! 2047: *)
! 2048: # Get the name of the library object.
! 2049: test -z "$libobj" && {
! 2050: func_basename "$srcfile"
! 2051: libobj="$func_basename_result"
! 2052: }
! 2053: ;;
! 2054: esac
! 2055:
! 2056: # Recognize several different file suffixes.
! 2057: # If the user specifies -o file.o, it is replaced with file.lo
! 2058: case $libobj in
! 2059: *.[cCFSifmso] | \
! 2060: *.ada | *.adb | *.ads | *.asm | \
! 2061: *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
! 2062: *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
! 2063: func_xform "$libobj"
! 2064: libobj=$func_xform_result
! 2065: ;;
! 2066: esac
! 2067:
! 2068: case $libobj in
! 2069: *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
! 2070: *)
! 2071: func_fatal_error "cannot determine name of library object from \`$libobj'"
! 2072: ;;
! 2073: esac
! 2074:
! 2075: func_infer_tag $base_compile
! 2076:
! 2077: for arg in $later; do
! 2078: case $arg in
! 2079: -shared)
! 2080: test "$build_libtool_libs" != yes && \
! 2081: func_fatal_configuration "can not build a shared library"
! 2082: build_old_libs=no
! 2083: continue
! 2084: ;;
! 2085:
! 2086: -static)
! 2087: build_libtool_libs=no
! 2088: build_old_libs=yes
! 2089: continue
! 2090: ;;
! 2091:
! 2092: -prefer-pic)
! 2093: pic_mode=yes
! 2094: continue
! 2095: ;;
! 2096:
! 2097: -prefer-non-pic)
! 2098: pic_mode=no
! 2099: continue
! 2100: ;;
! 2101: esac
! 2102: done
! 2103:
! 2104: func_quote_for_eval "$libobj"
! 2105: test "X$libobj" != "X$func_quote_for_eval_result" \
! 2106: && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
! 2107: && func_warning "libobj name \`$libobj' may not contain shell special characters."
! 2108: func_dirname_and_basename "$obj" "/" ""
! 2109: objname="$func_basename_result"
! 2110: xdir="$func_dirname_result"
! 2111: lobj=${xdir}$objdir/$objname
! 2112:
! 2113: test -z "$base_compile" && \
! 2114: func_fatal_help "you must specify a compilation command"
! 2115:
! 2116: # Delete any leftover library objects.
! 2117: if test "$build_old_libs" = yes; then
! 2118: removelist="$obj $lobj $libobj ${libobj}T"
! 2119: else
! 2120: removelist="$lobj $libobj ${libobj}T"
! 2121: fi
! 2122:
! 2123: # On Cygwin there's no "real" PIC flag so we must build both object types
! 2124: case $host_os in
! 2125: cygwin* | mingw* | pw32* | os2* | cegcc*)
! 2126: pic_mode=default
! 2127: ;;
! 2128: esac
! 2129: if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
! 2130: # non-PIC code in shared libraries is not supported
! 2131: pic_mode=default
! 2132: fi
! 2133:
! 2134: # Calculate the filename of the output object if compiler does
! 2135: # not support -o with -c
! 2136: if test "$compiler_c_o" = no; then
! 2137: output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
! 2138: lockfile="$output_obj.lock"
! 2139: else
! 2140: output_obj=
! 2141: need_locks=no
! 2142: lockfile=
! 2143: fi
! 2144:
! 2145: # Lock this critical section if it is needed
! 2146: # We use this script file to make the link, it avoids creating a new file
! 2147: if test "$need_locks" = yes; then
! 2148: until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
! 2149: func_echo "Waiting for $lockfile to be removed"
! 2150: sleep 2
! 2151: done
! 2152: elif test "$need_locks" = warn; then
! 2153: if test -f "$lockfile"; then
! 2154: $ECHO "\
! 2155: *** ERROR, $lockfile exists and contains:
! 2156: `cat $lockfile 2>/dev/null`
! 2157:
! 2158: This indicates that another process is trying to use the same
! 2159: temporary object file, and libtool could not work around it because
! 2160: your compiler does not support \`-c' and \`-o' together. If you
! 2161: repeat this compilation, it may succeed, by chance, but you had better
! 2162: avoid parallel builds (make -j) in this platform, or get a better
! 2163: compiler."
! 2164:
! 2165: $opt_dry_run || $RM $removelist
! 2166: exit $EXIT_FAILURE
! 2167: fi
! 2168: func_append removelist " $output_obj"
! 2169: $ECHO "$srcfile" > "$lockfile"
! 2170: fi
! 2171:
! 2172: $opt_dry_run || $RM $removelist
! 2173: func_append removelist " $lockfile"
! 2174: trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
! 2175:
! 2176: func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
! 2177: srcfile=$func_to_tool_file_result
! 2178: func_quote_for_eval "$srcfile"
! 2179: qsrcfile=$func_quote_for_eval_result
! 2180:
! 2181: # Only build a PIC object if we are building libtool libraries.
! 2182: if test "$build_libtool_libs" = yes; then
! 2183: # Without this assignment, base_compile gets emptied.
! 2184: fbsd_hideous_sh_bug=$base_compile
! 2185:
! 2186: if test "$pic_mode" != no; then
! 2187: command="$base_compile $qsrcfile $pic_flag"
! 2188: else
! 2189: # Don't build PIC code
! 2190: command="$base_compile $qsrcfile"
! 2191: fi
! 2192:
! 2193: func_mkdir_p "$xdir$objdir"
! 2194:
! 2195: if test -z "$output_obj"; then
! 2196: # Place PIC objects in $objdir
! 2197: func_append command " -o $lobj"
! 2198: fi
! 2199:
! 2200: func_show_eval_locale "$command" \
! 2201: 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
! 2202:
! 2203: if test "$need_locks" = warn &&
! 2204: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
! 2205: $ECHO "\
! 2206: *** ERROR, $lockfile contains:
! 2207: `cat $lockfile 2>/dev/null`
! 2208:
! 2209: but it should contain:
! 2210: $srcfile
! 2211:
! 2212: This indicates that another process is trying to use the same
! 2213: temporary object file, and libtool could not work around it because
! 2214: your compiler does not support \`-c' and \`-o' together. If you
! 2215: repeat this compilation, it may succeed, by chance, but you had better
! 2216: avoid parallel builds (make -j) in this platform, or get a better
! 2217: compiler."
! 2218:
! 2219: $opt_dry_run || $RM $removelist
! 2220: exit $EXIT_FAILURE
! 2221: fi
! 2222:
! 2223: # Just move the object if needed, then go on to compile the next one
! 2224: if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
! 2225: func_show_eval '$MV "$output_obj" "$lobj"' \
! 2226: 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
! 2227: fi
! 2228:
! 2229: # Allow error messages only from the first compilation.
! 2230: if test "$suppress_opt" = yes; then
! 2231: suppress_output=' >/dev/null 2>&1'
! 2232: fi
! 2233: fi
! 2234:
! 2235: # Only build a position-dependent object if we build old libraries.
! 2236: if test "$build_old_libs" = yes; then
! 2237: if test "$pic_mode" != yes; then
! 2238: # Don't build PIC code
! 2239: command="$base_compile $qsrcfile$pie_flag"
! 2240: else
! 2241: command="$base_compile $qsrcfile $pic_flag"
! 2242: fi
! 2243: if test "$compiler_c_o" = yes; then
! 2244: func_append command " -o $obj"
! 2245: fi
! 2246:
! 2247: # Suppress compiler output if we already did a PIC compilation.
! 2248: func_append command "$suppress_output"
! 2249: func_show_eval_locale "$command" \
! 2250: '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
! 2251:
! 2252: if test "$need_locks" = warn &&
! 2253: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
! 2254: $ECHO "\
! 2255: *** ERROR, $lockfile contains:
! 2256: `cat $lockfile 2>/dev/null`
! 2257:
! 2258: but it should contain:
! 2259: $srcfile
! 2260:
! 2261: This indicates that another process is trying to use the same
! 2262: temporary object file, and libtool could not work around it because
! 2263: your compiler does not support \`-c' and \`-o' together. If you
! 2264: repeat this compilation, it may succeed, by chance, but you had better
! 2265: avoid parallel builds (make -j) in this platform, or get a better
! 2266: compiler."
! 2267:
! 2268: $opt_dry_run || $RM $removelist
! 2269: exit $EXIT_FAILURE
! 2270: fi
! 2271:
! 2272: # Just move the object if needed
! 2273: if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
! 2274: func_show_eval '$MV "$output_obj" "$obj"' \
! 2275: 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
! 2276: fi
! 2277: fi
! 2278:
! 2279: $opt_dry_run || {
! 2280: func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
! 2281:
! 2282: # Unlock the critical section if it was locked
! 2283: if test "$need_locks" != no; then
! 2284: removelist=$lockfile
! 2285: $RM "$lockfile"
! 2286: fi
! 2287: }
! 2288:
! 2289: exit $EXIT_SUCCESS
! 2290: }
! 2291:
! 2292: $opt_help || {
! 2293: test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
! 2294: }
! 2295:
! 2296: func_mode_help ()
! 2297: {
! 2298: # We need to display help for each of the modes.
! 2299: case $opt_mode in
! 2300: "")
! 2301: # Generic help is extracted from the usage comments
! 2302: # at the start of this file.
! 2303: func_help
! 2304: ;;
! 2305:
! 2306: clean)
! 2307: $ECHO \
! 2308: "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
! 2309:
! 2310: Remove files from the build directory.
! 2311:
! 2312: RM is the name of the program to use to delete files associated with each FILE
! 2313: (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
! 2314: to RM.
! 2315:
! 2316: If FILE is a libtool library, object or program, all the files associated
! 2317: with it are deleted. Otherwise, only FILE itself is deleted using RM."
! 2318: ;;
! 2319:
! 2320: compile)
! 2321: $ECHO \
! 2322: "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
! 2323:
! 2324: Compile a source file into a libtool library object.
! 2325:
! 2326: This mode accepts the following additional options:
! 2327:
! 2328: -o OUTPUT-FILE set the output file name to OUTPUT-FILE
! 2329: -no-suppress do not suppress compiler output for multiple passes
! 2330: -prefer-pic try to build PIC objects only
! 2331: -prefer-non-pic try to build non-PIC objects only
! 2332: -shared do not build a \`.o' file suitable for static linking
! 2333: -static only build a \`.o' file suitable for static linking
! 2334: -Wc,FLAG pass FLAG directly to the compiler
! 2335:
! 2336: COMPILE-COMMAND is a command to be used in creating a \`standard' object file
! 2337: from the given SOURCEFILE.
! 2338:
! 2339: The output file name is determined by removing the directory component from
! 2340: SOURCEFILE, then substituting the C source code suffix \`.c' with the
! 2341: library object suffix, \`.lo'."
! 2342: ;;
! 2343:
! 2344: execute)
! 2345: $ECHO \
! 2346: "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
! 2347:
! 2348: Automatically set library path, then run a program.
! 2349:
! 2350: This mode accepts the following additional options:
! 2351:
! 2352: -dlopen FILE add the directory containing FILE to the library path
! 2353:
! 2354: This mode sets the library path environment variable according to \`-dlopen'
! 2355: flags.
! 2356:
! 2357: If any of the ARGS are libtool executable wrappers, then they are translated
! 2358: into their corresponding uninstalled binary, and any of their required library
! 2359: directories are added to the library path.
! 2360:
! 2361: Then, COMMAND is executed, with ARGS as arguments."
! 2362: ;;
! 2363:
! 2364: finish)
! 2365: $ECHO \
! 2366: "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
! 2367:
! 2368: Complete the installation of libtool libraries.
! 2369:
! 2370: Each LIBDIR is a directory that contains libtool libraries.
! 2371:
! 2372: The commands that this mode executes may require superuser privileges. Use
! 2373: the \`--dry-run' option if you just want to see what would be executed."
! 2374: ;;
! 2375:
! 2376: install)
! 2377: $ECHO \
! 2378: "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
! 2379:
! 2380: Install executables or libraries.
! 2381:
! 2382: INSTALL-COMMAND is the installation command. The first component should be
! 2383: either the \`install' or \`cp' program.
! 2384:
! 2385: The following components of INSTALL-COMMAND are treated specially:
! 2386:
! 2387: -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
! 2388:
! 2389: The rest of the components are interpreted as arguments to that command (only
! 2390: BSD-compatible install options are recognized)."
! 2391: ;;
! 2392:
! 2393: link)
! 2394: $ECHO \
! 2395: "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
! 2396:
! 2397: Link object files or libraries together to form another library, or to
! 2398: create an executable program.
! 2399:
! 2400: LINK-COMMAND is a command using the C compiler that you would use to create
! 2401: a program from several object files.
! 2402:
! 2403: The following components of LINK-COMMAND are treated specially:
! 2404:
! 2405: -all-static do not do any dynamic linking at all
! 2406: -avoid-version do not add a version suffix if possible
! 2407: -bindir BINDIR specify path to binaries directory (for systems where
! 2408: libraries must be found in the PATH setting at runtime)
! 2409: -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
! 2410: -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
! 2411: -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
! 2412: -export-symbols SYMFILE
! 2413: try to export only the symbols listed in SYMFILE
! 2414: -export-symbols-regex REGEX
! 2415: try to export only the symbols matching REGEX
! 2416: -LLIBDIR search LIBDIR for required installed libraries
! 2417: -lNAME OUTPUT-FILE requires the installed library libNAME
! 2418: -module build a library that can dlopened
! 2419: -no-fast-install disable the fast-install mode
! 2420: -no-install link a not-installable executable
! 2421: -no-undefined declare that a library does not refer to external symbols
! 2422: -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
! 2423: -objectlist FILE Use a list of object files found in FILE to specify objects
! 2424: -precious-files-regex REGEX
! 2425: don't remove output files matching REGEX
! 2426: -release RELEASE specify package release information
! 2427: -rpath LIBDIR the created library will eventually be installed in LIBDIR
! 2428: -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
! 2429: -shared only do dynamic linking of libtool libraries
! 2430: -shrext SUFFIX override the standard shared library file extension
! 2431: -static do not do any dynamic linking of uninstalled libtool libraries
! 2432: -static-libtool-libs
! 2433: do not do any dynamic linking of libtool libraries
! 2434: -version-info CURRENT[:REVISION[:AGE]]
! 2435: specify library version info [each variable defaults to 0]
! 2436: -weak LIBNAME declare that the target provides the LIBNAME interface
! 2437: -Wc,FLAG
! 2438: -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
! 2439: -Wl,FLAG
! 2440: -Xlinker FLAG pass linker-specific FLAG directly to the linker
! 2441: -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
! 2442:
! 2443: All other options (arguments beginning with \`-') are ignored.
! 2444:
! 2445: Every other argument is treated as a filename. Files ending in \`.la' are
! 2446: treated as uninstalled libtool libraries, other files are standard or library
! 2447: object files.
! 2448:
! 2449: If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
! 2450: only library objects (\`.lo' files) may be specified, and \`-rpath' is
! 2451: required, except when creating a convenience library.
! 2452:
! 2453: If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
! 2454: using \`ar' and \`ranlib', or on Windows using \`lib'.
! 2455:
! 2456: If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
! 2457: is created, otherwise an executable program is created."
! 2458: ;;
! 2459:
! 2460: uninstall)
! 2461: $ECHO \
! 2462: "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
! 2463:
! 2464: Remove libraries from an installation directory.
! 2465:
! 2466: RM is the name of the program to use to delete files associated with each FILE
! 2467: (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
! 2468: to RM.
! 2469:
! 2470: If FILE is a libtool library, all the files associated with it are deleted.
! 2471: Otherwise, only FILE itself is deleted using RM."
! 2472: ;;
! 2473:
! 2474: *)
! 2475: func_fatal_help "invalid operation mode \`$opt_mode'"
! 2476: ;;
! 2477: esac
! 2478:
! 2479: echo
! 2480: $ECHO "Try \`$progname --help' for more information about other modes."
! 2481: }
! 2482:
! 2483: # Now that we've collected a possible --mode arg, show help if necessary
! 2484: if $opt_help; then
! 2485: if test "$opt_help" = :; then
! 2486: func_mode_help
! 2487: else
! 2488: {
! 2489: func_help noexit
! 2490: for opt_mode in compile link execute install finish uninstall clean; do
! 2491: func_mode_help
! 2492: done
! 2493: } | sed -n '1p; 2,$s/^Usage:/ or: /p'
! 2494: {
! 2495: func_help noexit
! 2496: for opt_mode in compile link execute install finish uninstall clean; do
! 2497: echo
! 2498: func_mode_help
! 2499: done
! 2500: } |
! 2501: sed '1d
! 2502: /^When reporting/,/^Report/{
! 2503: H
! 2504: d
! 2505: }
! 2506: $x
! 2507: /information about other modes/d
! 2508: /more detailed .*MODE/d
! 2509: s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
! 2510: fi
! 2511: exit $?
! 2512: fi
! 2513:
! 2514:
! 2515: # func_mode_execute arg...
! 2516: func_mode_execute ()
! 2517: {
! 2518: $opt_debug
! 2519: # The first argument is the command name.
! 2520: cmd="$nonopt"
! 2521: test -z "$cmd" && \
! 2522: func_fatal_help "you must specify a COMMAND"
! 2523:
! 2524: # Handle -dlopen flags immediately.
! 2525: for file in $opt_dlopen; do
! 2526: test -f "$file" \
! 2527: || func_fatal_help "\`$file' is not a file"
! 2528:
! 2529: dir=
! 2530: case $file in
! 2531: *.la)
! 2532: func_resolve_sysroot "$file"
! 2533: file=$func_resolve_sysroot_result
! 2534:
! 2535: # Check to see that this really is a libtool archive.
! 2536: func_lalib_unsafe_p "$file" \
! 2537: || func_fatal_help "\`$lib' is not a valid libtool archive"
! 2538:
! 2539: # Read the libtool library.
! 2540: dlname=
! 2541: library_names=
! 2542: func_source "$file"
! 2543:
! 2544: # Skip this library if it cannot be dlopened.
! 2545: if test -z "$dlname"; then
! 2546: # Warn if it was a shared library.
! 2547: test -n "$library_names" && \
! 2548: func_warning "\`$file' was not linked with \`-export-dynamic'"
! 2549: continue
! 2550: fi
! 2551:
! 2552: func_dirname "$file" "" "."
! 2553: dir="$func_dirname_result"
! 2554:
! 2555: if test -f "$dir/$objdir/$dlname"; then
! 2556: func_append dir "/$objdir"
! 2557: else
! 2558: if test ! -f "$dir/$dlname"; then
! 2559: func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
! 2560: fi
! 2561: fi
! 2562: ;;
! 2563:
! 2564: *.lo)
! 2565: # Just add the directory containing the .lo file.
! 2566: func_dirname "$file" "" "."
! 2567: dir="$func_dirname_result"
! 2568: ;;
! 2569:
! 2570: *)
! 2571: func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
! 2572: continue
! 2573: ;;
! 2574: esac
! 2575:
! 2576: # Get the absolute pathname.
! 2577: absdir=`cd "$dir" && pwd`
! 2578: test -n "$absdir" && dir="$absdir"
! 2579:
! 2580: # Now add the directory to shlibpath_var.
! 2581: if eval "test -z \"\$$shlibpath_var\""; then
! 2582: eval "$shlibpath_var=\"\$dir\""
! 2583: else
! 2584: eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
! 2585: fi
! 2586: done
! 2587:
! 2588: # This variable tells wrapper scripts just to set shlibpath_var
! 2589: # rather than running their programs.
! 2590: libtool_execute_magic="$magic"
! 2591:
! 2592: # Check if any of the arguments is a wrapper script.
! 2593: args=
! 2594: for file
! 2595: do
! 2596: case $file in
! 2597: -* | *.la | *.lo ) ;;
! 2598: *)
! 2599: # Do a test to see if this is really a libtool program.
! 2600: if func_ltwrapper_script_p "$file"; then
! 2601: func_source "$file"
! 2602: # Transform arg to wrapped name.
! 2603: file="$progdir/$program"
! 2604: elif func_ltwrapper_executable_p "$file"; then
! 2605: func_ltwrapper_scriptname "$file"
! 2606: func_source "$func_ltwrapper_scriptname_result"
! 2607: # Transform arg to wrapped name.
! 2608: file="$progdir/$program"
! 2609: fi
! 2610: ;;
! 2611: esac
! 2612: # Quote arguments (to preserve shell metacharacters).
! 2613: func_append_quoted args "$file"
! 2614: done
! 2615:
! 2616: if test "X$opt_dry_run" = Xfalse; then
! 2617: if test -n "$shlibpath_var"; then
! 2618: # Export the shlibpath_var.
! 2619: eval "export $shlibpath_var"
! 2620: fi
! 2621:
! 2622: # Restore saved environment variables
! 2623: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
! 2624: do
! 2625: eval "if test \"\${save_$lt_var+set}\" = set; then
! 2626: $lt_var=\$save_$lt_var; export $lt_var
! 2627: else
! 2628: $lt_unset $lt_var
! 2629: fi"
! 2630: done
! 2631:
! 2632: # Now prepare to actually exec the command.
! 2633: exec_cmd="\$cmd$args"
! 2634: else
! 2635: # Display what would be done.
! 2636: if test -n "$shlibpath_var"; then
! 2637: eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
! 2638: echo "export $shlibpath_var"
! 2639: fi
! 2640: $ECHO "$cmd$args"
! 2641: exit $EXIT_SUCCESS
! 2642: fi
! 2643: }
! 2644:
! 2645: test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
! 2646:
! 2647:
! 2648: # func_mode_finish arg...
! 2649: func_mode_finish ()
! 2650: {
! 2651: $opt_debug
! 2652: libs=
! 2653: libdirs=
! 2654: admincmds=
! 2655:
! 2656: for opt in "$nonopt" ${1+"$@"}
! 2657: do
! 2658: if test -d "$opt"; then
! 2659: func_append libdirs " $opt"
! 2660:
! 2661: elif test -f "$opt"; then
! 2662: if func_lalib_unsafe_p "$opt"; then
! 2663: func_append libs " $opt"
! 2664: else
! 2665: func_warning "\`$opt' is not a valid libtool archive"
! 2666: fi
! 2667:
! 2668: else
! 2669: func_fatal_error "invalid argument \`$opt'"
! 2670: fi
! 2671: done
! 2672:
! 2673: if test -n "$libs"; then
! 2674: if test -n "$lt_sysroot"; then
! 2675: sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
! 2676: sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
! 2677: else
! 2678: sysroot_cmd=
! 2679: fi
! 2680:
! 2681: # Remove sysroot references
! 2682: if $opt_dry_run; then
! 2683: for lib in $libs; do
! 2684: echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
! 2685: done
! 2686: else
! 2687: tmpdir=`func_mktempdir`
! 2688: for lib in $libs; do
! 2689: sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
! 2690: > $tmpdir/tmp-la
! 2691: mv -f $tmpdir/tmp-la $lib
! 2692: done
! 2693: ${RM}r "$tmpdir"
! 2694: fi
! 2695: fi
! 2696:
! 2697: if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
! 2698: for libdir in $libdirs; do
! 2699: if test -n "$finish_cmds"; then
! 2700: # Do each command in the finish commands.
! 2701: func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
! 2702: '"$cmd"'"'
! 2703: fi
! 2704: if test -n "$finish_eval"; then
! 2705: # Do the single finish_eval.
! 2706: eval cmds=\"$finish_eval\"
! 2707: $opt_dry_run || eval "$cmds" || func_append admincmds "
! 2708: $cmds"
! 2709: fi
! 2710: done
! 2711: fi
! 2712:
! 2713: # Exit here if they wanted silent mode.
! 2714: $opt_silent && exit $EXIT_SUCCESS
! 2715:
! 2716: if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
! 2717: echo "----------------------------------------------------------------------"
! 2718: echo "Libraries have been installed in:"
! 2719: for libdir in $libdirs; do
! 2720: $ECHO " $libdir"
! 2721: done
! 2722: echo
! 2723: echo "If you ever happen to want to link against installed libraries"
! 2724: echo "in a given directory, LIBDIR, you must either use libtool, and"
! 2725: echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
! 2726: echo "flag during linking and do at least one of the following:"
! 2727: if test -n "$shlibpath_var"; then
! 2728: echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
! 2729: echo " during execution"
! 2730: fi
! 2731: if test -n "$runpath_var"; then
! 2732: echo " - add LIBDIR to the \`$runpath_var' environment variable"
! 2733: echo " during linking"
! 2734: fi
! 2735: if test -n "$hardcode_libdir_flag_spec"; then
! 2736: libdir=LIBDIR
! 2737: eval flag=\"$hardcode_libdir_flag_spec\"
! 2738:
! 2739: $ECHO " - use the \`$flag' linker flag"
! 2740: fi
! 2741: if test -n "$admincmds"; then
! 2742: $ECHO " - have your system administrator run these commands:$admincmds"
! 2743: fi
! 2744: if test -f /etc/ld.so.conf; then
! 2745: echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
! 2746: fi
! 2747: echo
! 2748:
! 2749: echo "See any operating system documentation about shared libraries for"
! 2750: case $host in
! 2751: solaris2.[6789]|solaris2.1[0-9])
! 2752: echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
! 2753: echo "pages."
! 2754: ;;
! 2755: *)
! 2756: echo "more information, such as the ld(1) and ld.so(8) manual pages."
! 2757: ;;
! 2758: esac
! 2759: echo "----------------------------------------------------------------------"
! 2760: fi
! 2761: exit $EXIT_SUCCESS
! 2762: }
! 2763:
! 2764: test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
! 2765:
! 2766:
! 2767: # func_mode_install arg...
! 2768: func_mode_install ()
! 2769: {
! 2770: $opt_debug
! 2771: # There may be an optional sh(1) argument at the beginning of
! 2772: # install_prog (especially on Windows NT).
! 2773: if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
! 2774: # Allow the use of GNU shtool's install command.
! 2775: case $nonopt in *shtool*) :;; *) false;; esac; then
! 2776: # Aesthetically quote it.
! 2777: func_quote_for_eval "$nonopt"
! 2778: install_prog="$func_quote_for_eval_result "
! 2779: arg=$1
! 2780: shift
! 2781: else
! 2782: install_prog=
! 2783: arg=$nonopt
! 2784: fi
! 2785:
! 2786: # The real first argument should be the name of the installation program.
! 2787: # Aesthetically quote it.
! 2788: func_quote_for_eval "$arg"
! 2789: func_append install_prog "$func_quote_for_eval_result"
! 2790: install_shared_prog=$install_prog
! 2791: case " $install_prog " in
! 2792: *[\\\ /]cp\ *) install_cp=: ;;
! 2793: *) install_cp=false ;;
! 2794: esac
! 2795:
! 2796: # We need to accept at least all the BSD install flags.
! 2797: dest=
! 2798: files=
! 2799: opts=
! 2800: prev=
! 2801: install_type=
! 2802: isdir=no
! 2803: stripme=
! 2804: no_mode=:
! 2805: for arg
! 2806: do
! 2807: arg2=
! 2808: if test -n "$dest"; then
! 2809: func_append files " $dest"
! 2810: dest=$arg
! 2811: continue
! 2812: fi
! 2813:
! 2814: case $arg in
! 2815: -d) isdir=yes ;;
! 2816: -f)
! 2817: if $install_cp; then :; else
! 2818: prev=$arg
! 2819: fi
! 2820: ;;
! 2821: -g | -m | -o)
! 2822: prev=$arg
! 2823: ;;
! 2824: -s)
! 2825: stripme=" -s"
! 2826: continue
! 2827: ;;
! 2828: -*)
! 2829: ;;
! 2830: *)
! 2831: # If the previous option needed an argument, then skip it.
! 2832: if test -n "$prev"; then
! 2833: if test "x$prev" = x-m && test -n "$install_override_mode"; then
! 2834: arg2=$install_override_mode
! 2835: no_mode=false
! 2836: fi
! 2837: prev=
! 2838: else
! 2839: dest=$arg
! 2840: continue
! 2841: fi
! 2842: ;;
! 2843: esac
! 2844:
! 2845: # Aesthetically quote the argument.
! 2846: func_quote_for_eval "$arg"
! 2847: func_append install_prog " $func_quote_for_eval_result"
! 2848: if test -n "$arg2"; then
! 2849: func_quote_for_eval "$arg2"
! 2850: fi
! 2851: func_append install_shared_prog " $func_quote_for_eval_result"
! 2852: done
! 2853:
! 2854: test -z "$install_prog" && \
! 2855: func_fatal_help "you must specify an install program"
! 2856:
! 2857: test -n "$prev" && \
! 2858: func_fatal_help "the \`$prev' option requires an argument"
! 2859:
! 2860: if test -n "$install_override_mode" && $no_mode; then
! 2861: if $install_cp; then :; else
! 2862: func_quote_for_eval "$install_override_mode"
! 2863: func_append install_shared_prog " -m $func_quote_for_eval_result"
! 2864: fi
! 2865: fi
! 2866:
! 2867: if test -z "$files"; then
! 2868: if test -z "$dest"; then
! 2869: func_fatal_help "no file or destination specified"
! 2870: else
! 2871: func_fatal_help "you must specify a destination"
! 2872: fi
! 2873: fi
! 2874:
! 2875: # Strip any trailing slash from the destination.
! 2876: func_stripname '' '/' "$dest"
! 2877: dest=$func_stripname_result
! 2878:
! 2879: # Check to see that the destination is a directory.
! 2880: test -d "$dest" && isdir=yes
! 2881: if test "$isdir" = yes; then
! 2882: destdir="$dest"
! 2883: destname=
! 2884: else
! 2885: func_dirname_and_basename "$dest" "" "."
! 2886: destdir="$func_dirname_result"
! 2887: destname="$func_basename_result"
! 2888:
! 2889: # Not a directory, so check to see that there is only one file specified.
! 2890: set dummy $files; shift
! 2891: test "$#" -gt 1 && \
! 2892: func_fatal_help "\`$dest' is not a directory"
! 2893: fi
! 2894: case $destdir in
! 2895: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 2896: *)
! 2897: for file in $files; do
! 2898: case $file in
! 2899: *.lo) ;;
! 2900: *)
! 2901: func_fatal_help "\`$destdir' must be an absolute directory name"
! 2902: ;;
! 2903: esac
! 2904: done
! 2905: ;;
! 2906: esac
! 2907:
! 2908: # This variable tells wrapper scripts just to set variables rather
! 2909: # than running their programs.
! 2910: libtool_install_magic="$magic"
! 2911:
! 2912: staticlibs=
! 2913: future_libdirs=
! 2914: current_libdirs=
! 2915: for file in $files; do
! 2916:
! 2917: # Do each installation.
! 2918: case $file in
! 2919: *.$libext)
! 2920: # Do the static libraries later.
! 2921: func_append staticlibs " $file"
! 2922: ;;
! 2923:
! 2924: *.la)
! 2925: func_resolve_sysroot "$file"
! 2926: file=$func_resolve_sysroot_result
! 2927:
! 2928: # Check to see that this really is a libtool archive.
! 2929: func_lalib_unsafe_p "$file" \
! 2930: || func_fatal_help "\`$file' is not a valid libtool archive"
! 2931:
! 2932: library_names=
! 2933: old_library=
! 2934: relink_command=
! 2935: func_source "$file"
! 2936:
! 2937: # Add the libdir to current_libdirs if it is the destination.
! 2938: if test "X$destdir" = "X$libdir"; then
! 2939: case "$current_libdirs " in
! 2940: *" $libdir "*) ;;
! 2941: *) func_append current_libdirs " $libdir" ;;
! 2942: esac
! 2943: else
! 2944: # Note the libdir as a future libdir.
! 2945: case "$future_libdirs " in
! 2946: *" $libdir "*) ;;
! 2947: *) func_append future_libdirs " $libdir" ;;
! 2948: esac
! 2949: fi
! 2950:
! 2951: func_dirname "$file" "/" ""
! 2952: dir="$func_dirname_result"
! 2953: func_append dir "$objdir"
! 2954:
! 2955: if test -n "$relink_command"; then
! 2956: # Determine the prefix the user has applied to our future dir.
! 2957: inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
! 2958:
! 2959: # Don't allow the user to place us outside of our expected
! 2960: # location b/c this prevents finding dependent libraries that
! 2961: # are installed to the same prefix.
! 2962: # At present, this check doesn't affect windows .dll's that
! 2963: # are installed into $libdir/../bin (currently, that works fine)
! 2964: # but it's something to keep an eye on.
! 2965: test "$inst_prefix_dir" = "$destdir" && \
! 2966: func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
! 2967:
! 2968: if test -n "$inst_prefix_dir"; then
! 2969: # Stick the inst_prefix_dir data into the link command.
! 2970: relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
! 2971: else
! 2972: relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
! 2973: fi
! 2974:
! 2975: func_warning "relinking \`$file'"
! 2976: func_show_eval "$relink_command" \
! 2977: 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
! 2978: fi
! 2979:
! 2980: # See the names of the shared library.
! 2981: set dummy $library_names; shift
! 2982: if test -n "$1"; then
! 2983: realname="$1"
! 2984: shift
! 2985:
! 2986: srcname="$realname"
! 2987: test -n "$relink_command" && srcname="$realname"T
! 2988:
! 2989: # Install the shared library and build the symlinks.
! 2990: func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
! 2991: 'exit $?'
! 2992: tstripme="$stripme"
! 2993: case $host_os in
! 2994: cygwin* | mingw* | pw32* | cegcc*)
! 2995: case $realname in
! 2996: *.dll.a)
! 2997: tstripme=""
! 2998: ;;
! 2999: esac
! 3000: ;;
! 3001: esac
! 3002: if test -n "$tstripme" && test -n "$striplib"; then
! 3003: func_show_eval "$striplib $destdir/$realname" 'exit $?'
! 3004: fi
! 3005:
! 3006: if test "$#" -gt 0; then
! 3007: # Delete the old symlinks, and create new ones.
! 3008: # Try `ln -sf' first, because the `ln' binary might depend on
! 3009: # the symlink we replace! Solaris /bin/ln does not understand -f,
! 3010: # so we also need to try rm && ln -s.
! 3011: for linkname
! 3012: do
! 3013: test "$linkname" != "$realname" \
! 3014: && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
! 3015: done
! 3016: fi
! 3017:
! 3018: # Do each command in the postinstall commands.
! 3019: lib="$destdir/$realname"
! 3020: func_execute_cmds "$postinstall_cmds" 'exit $?'
! 3021: fi
! 3022:
! 3023: # Install the pseudo-library for information purposes.
! 3024: func_basename "$file"
! 3025: name="$func_basename_result"
! 3026: instname="$dir/$name"i
! 3027: func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
! 3028:
! 3029: # Maybe install the static library, too.
! 3030: test -n "$old_library" && func_append staticlibs " $dir/$old_library"
! 3031: ;;
! 3032:
! 3033: *.lo)
! 3034: # Install (i.e. copy) a libtool object.
! 3035:
! 3036: # Figure out destination file name, if it wasn't already specified.
! 3037: if test -n "$destname"; then
! 3038: destfile="$destdir/$destname"
! 3039: else
! 3040: func_basename "$file"
! 3041: destfile="$func_basename_result"
! 3042: destfile="$destdir/$destfile"
! 3043: fi
! 3044:
! 3045: # Deduce the name of the destination old-style object file.
! 3046: case $destfile in
! 3047: *.lo)
! 3048: func_lo2o "$destfile"
! 3049: staticdest=$func_lo2o_result
! 3050: ;;
! 3051: *.$objext)
! 3052: staticdest="$destfile"
! 3053: destfile=
! 3054: ;;
! 3055: *)
! 3056: func_fatal_help "cannot copy a libtool object to \`$destfile'"
! 3057: ;;
! 3058: esac
! 3059:
! 3060: # Install the libtool object if requested.
! 3061: test -n "$destfile" && \
! 3062: func_show_eval "$install_prog $file $destfile" 'exit $?'
! 3063:
! 3064: # Install the old object if enabled.
! 3065: if test "$build_old_libs" = yes; then
! 3066: # Deduce the name of the old-style object file.
! 3067: func_lo2o "$file"
! 3068: staticobj=$func_lo2o_result
! 3069: func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
! 3070: fi
! 3071: exit $EXIT_SUCCESS
! 3072: ;;
! 3073:
! 3074: *)
! 3075: # Figure out destination file name, if it wasn't already specified.
! 3076: if test -n "$destname"; then
! 3077: destfile="$destdir/$destname"
! 3078: else
! 3079: func_basename "$file"
! 3080: destfile="$func_basename_result"
! 3081: destfile="$destdir/$destfile"
! 3082: fi
! 3083:
! 3084: # If the file is missing, and there is a .exe on the end, strip it
! 3085: # because it is most likely a libtool script we actually want to
! 3086: # install
! 3087: stripped_ext=""
! 3088: case $file in
! 3089: *.exe)
! 3090: if test ! -f "$file"; then
! 3091: func_stripname '' '.exe' "$file"
! 3092: file=$func_stripname_result
! 3093: stripped_ext=".exe"
! 3094: fi
! 3095: ;;
! 3096: esac
! 3097:
! 3098: # Do a test to see if this is really a libtool program.
! 3099: case $host in
! 3100: *cygwin* | *mingw*)
! 3101: if func_ltwrapper_executable_p "$file"; then
! 3102: func_ltwrapper_scriptname "$file"
! 3103: wrapper=$func_ltwrapper_scriptname_result
! 3104: else
! 3105: func_stripname '' '.exe' "$file"
! 3106: wrapper=$func_stripname_result
! 3107: fi
! 3108: ;;
! 3109: *)
! 3110: wrapper=$file
! 3111: ;;
! 3112: esac
! 3113: if func_ltwrapper_script_p "$wrapper"; then
! 3114: notinst_deplibs=
! 3115: relink_command=
! 3116:
! 3117: func_source "$wrapper"
! 3118:
! 3119: # Check the variables that should have been set.
! 3120: test -z "$generated_by_libtool_version" && \
! 3121: func_fatal_error "invalid libtool wrapper script \`$wrapper'"
! 3122:
! 3123: finalize=yes
! 3124: for lib in $notinst_deplibs; do
! 3125: # Check to see that each library is installed.
! 3126: libdir=
! 3127: if test -f "$lib"; then
! 3128: func_source "$lib"
! 3129: fi
! 3130: libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
! 3131: if test -n "$libdir" && test ! -f "$libfile"; then
! 3132: func_warning "\`$lib' has not been installed in \`$libdir'"
! 3133: finalize=no
! 3134: fi
! 3135: done
! 3136:
! 3137: relink_command=
! 3138: func_source "$wrapper"
! 3139:
! 3140: outputname=
! 3141: if test "$fast_install" = no && test -n "$relink_command"; then
! 3142: $opt_dry_run || {
! 3143: if test "$finalize" = yes; then
! 3144: tmpdir=`func_mktempdir`
! 3145: func_basename "$file$stripped_ext"
! 3146: file="$func_basename_result"
! 3147: outputname="$tmpdir/$file"
! 3148: # Replace the output file specification.
! 3149: relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
! 3150:
! 3151: $opt_silent || {
! 3152: func_quote_for_expand "$relink_command"
! 3153: eval "func_echo $func_quote_for_expand_result"
! 3154: }
! 3155: if eval "$relink_command"; then :
! 3156: else
! 3157: func_error "error: relink \`$file' with the above command before installing it"
! 3158: $opt_dry_run || ${RM}r "$tmpdir"
! 3159: continue
! 3160: fi
! 3161: file="$outputname"
! 3162: else
! 3163: func_warning "cannot relink \`$file'"
! 3164: fi
! 3165: }
! 3166: else
! 3167: # Install the binary that we compiled earlier.
! 3168: file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
! 3169: fi
! 3170: fi
! 3171:
! 3172: # remove .exe since cygwin /usr/bin/install will append another
! 3173: # one anyway
! 3174: case $install_prog,$host in
! 3175: */usr/bin/install*,*cygwin*)
! 3176: case $file:$destfile in
! 3177: *.exe:*.exe)
! 3178: # this is ok
! 3179: ;;
! 3180: *.exe:*)
! 3181: destfile=$destfile.exe
! 3182: ;;
! 3183: *:*.exe)
! 3184: func_stripname '' '.exe' "$destfile"
! 3185: destfile=$func_stripname_result
! 3186: ;;
! 3187: esac
! 3188: ;;
! 3189: esac
! 3190: func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
! 3191: $opt_dry_run || if test -n "$outputname"; then
! 3192: ${RM}r "$tmpdir"
! 3193: fi
! 3194: ;;
! 3195: esac
! 3196: done
! 3197:
! 3198: for file in $staticlibs; do
! 3199: func_basename "$file"
! 3200: name="$func_basename_result"
! 3201:
! 3202: # Set up the ranlib parameters.
! 3203: oldlib="$destdir/$name"
! 3204:
! 3205: func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
! 3206:
! 3207: if test -n "$stripme" && test -n "$old_striplib"; then
! 3208: func_show_eval "$old_striplib $oldlib" 'exit $?'
! 3209: fi
! 3210:
! 3211: # Do each command in the postinstall commands.
! 3212: func_execute_cmds "$old_postinstall_cmds" 'exit $?'
! 3213: done
! 3214:
! 3215: test -n "$future_libdirs" && \
! 3216: func_warning "remember to run \`$progname --finish$future_libdirs'"
! 3217:
! 3218: if test -n "$current_libdirs"; then
! 3219: # Maybe just do a dry run.
! 3220: $opt_dry_run && current_libdirs=" -n$current_libdirs"
! 3221: exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
! 3222: else
! 3223: exit $EXIT_SUCCESS
! 3224: fi
! 3225: }
! 3226:
! 3227: test "$opt_mode" = install && func_mode_install ${1+"$@"}
! 3228:
! 3229:
! 3230: # func_generate_dlsyms outputname originator pic_p
! 3231: # Extract symbols from dlprefiles and create ${outputname}S.o with
! 3232: # a dlpreopen symbol table.
! 3233: func_generate_dlsyms ()
! 3234: {
! 3235: $opt_debug
! 3236: my_outputname="$1"
! 3237: my_originator="$2"
! 3238: my_pic_p="${3-no}"
! 3239: my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
! 3240: my_dlsyms=
! 3241:
! 3242: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 3243: if test -n "$NM" && test -n "$global_symbol_pipe"; then
! 3244: my_dlsyms="${my_outputname}S.c"
! 3245: else
! 3246: func_error "not configured to extract global symbols from dlpreopened files"
! 3247: fi
! 3248: fi
! 3249:
! 3250: if test -n "$my_dlsyms"; then
! 3251: case $my_dlsyms in
! 3252: "") ;;
! 3253: *.c)
! 3254: # Discover the nlist of each of the dlfiles.
! 3255: nlist="$output_objdir/${my_outputname}.nm"
! 3256:
! 3257: func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
! 3258:
! 3259: # Parse the name list into a source file.
! 3260: func_verbose "creating $output_objdir/$my_dlsyms"
! 3261:
! 3262: $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
! 3263: /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
! 3264: /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
! 3265:
! 3266: #ifdef __cplusplus
! 3267: extern \"C\" {
! 3268: #endif
! 3269:
! 3270: #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
! 3271: #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
! 3272: #endif
! 3273:
! 3274: /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
! 3275: #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
! 3276: /* DATA imports from DLLs on WIN32 con't be const, because runtime
! 3277: relocations are performed -- see ld's documentation on pseudo-relocs. */
! 3278: # define LT_DLSYM_CONST
! 3279: #elif defined(__osf__)
! 3280: /* This system does not cope well with relocations in const data. */
! 3281: # define LT_DLSYM_CONST
! 3282: #else
! 3283: # define LT_DLSYM_CONST const
! 3284: #endif
! 3285:
! 3286: /* External symbol declarations for the compiler. */\
! 3287: "
! 3288:
! 3289: if test "$dlself" = yes; then
! 3290: func_verbose "generating symbol list for \`$output'"
! 3291:
! 3292: $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
! 3293:
! 3294: # Add our own program objects to the symbol list.
! 3295: progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
! 3296: for progfile in $progfiles; do
! 3297: func_to_tool_file "$progfile" func_convert_file_msys_to_w32
! 3298: func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
! 3299: $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
! 3300: done
! 3301:
! 3302: if test -n "$exclude_expsyms"; then
! 3303: $opt_dry_run || {
! 3304: eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
! 3305: eval '$MV "$nlist"T "$nlist"'
! 3306: }
! 3307: fi
! 3308:
! 3309: if test -n "$export_symbols_regex"; then
! 3310: $opt_dry_run || {
! 3311: eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
! 3312: eval '$MV "$nlist"T "$nlist"'
! 3313: }
! 3314: fi
! 3315:
! 3316: # Prepare the list of exported symbols
! 3317: if test -z "$export_symbols"; then
! 3318: export_symbols="$output_objdir/$outputname.exp"
! 3319: $opt_dry_run || {
! 3320: $RM $export_symbols
! 3321: eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
! 3322: case $host in
! 3323: *cygwin* | *mingw* | *cegcc* )
! 3324: eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
! 3325: eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
! 3326: ;;
! 3327: esac
! 3328: }
! 3329: else
! 3330: $opt_dry_run || {
! 3331: eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
! 3332: eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
! 3333: eval '$MV "$nlist"T "$nlist"'
! 3334: case $host in
! 3335: *cygwin* | *mingw* | *cegcc* )
! 3336: eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
! 3337: eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
! 3338: ;;
! 3339: esac
! 3340: }
! 3341: fi
! 3342: fi
! 3343:
! 3344: for dlprefile in $dlprefiles; do
! 3345: func_verbose "extracting global C symbols from \`$dlprefile'"
! 3346: func_basename "$dlprefile"
! 3347: name="$func_basename_result"
! 3348: case $host in
! 3349: *cygwin* | *mingw* | *cegcc* )
! 3350: # if an import library, we need to obtain dlname
! 3351: if func_win32_import_lib_p "$dlprefile"; then
! 3352: func_tr_sh "$dlprefile"
! 3353: eval "curr_lafile=\$libfile_$func_tr_sh_result"
! 3354: dlprefile_dlbasename=""
! 3355: if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
! 3356: # Use subshell, to avoid clobbering current variable values
! 3357: dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
! 3358: if test -n "$dlprefile_dlname" ; then
! 3359: func_basename "$dlprefile_dlname"
! 3360: dlprefile_dlbasename="$func_basename_result"
! 3361: else
! 3362: # no lafile. user explicitly requested -dlpreopen <import library>.
! 3363: $sharedlib_from_linklib_cmd "$dlprefile"
! 3364: dlprefile_dlbasename=$sharedlib_from_linklib_result
! 3365: fi
! 3366: fi
! 3367: $opt_dry_run || {
! 3368: if test -n "$dlprefile_dlbasename" ; then
! 3369: eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
! 3370: else
! 3371: func_warning "Could not compute DLL name from $name"
! 3372: eval '$ECHO ": $name " >> "$nlist"'
! 3373: fi
! 3374: func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
! 3375: eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
! 3376: $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
! 3377: }
! 3378: else # not an import lib
! 3379: $opt_dry_run || {
! 3380: eval '$ECHO ": $name " >> "$nlist"'
! 3381: func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
! 3382: eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
! 3383: }
! 3384: fi
! 3385: ;;
! 3386: *)
! 3387: $opt_dry_run || {
! 3388: eval '$ECHO ": $name " >> "$nlist"'
! 3389: func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
! 3390: eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
! 3391: }
! 3392: ;;
! 3393: esac
! 3394: done
! 3395:
! 3396: $opt_dry_run || {
! 3397: # Make sure we have at least an empty file.
! 3398: test -f "$nlist" || : > "$nlist"
! 3399:
! 3400: if test -n "$exclude_expsyms"; then
! 3401: $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
! 3402: $MV "$nlist"T "$nlist"
! 3403: fi
! 3404:
! 3405: # Try sorting and uniquifying the output.
! 3406: if $GREP -v "^: " < "$nlist" |
! 3407: if sort -k 3 </dev/null >/dev/null 2>&1; then
! 3408: sort -k 3
! 3409: else
! 3410: sort +2
! 3411: fi |
! 3412: uniq > "$nlist"S; then
! 3413: :
! 3414: else
! 3415: $GREP -v "^: " < "$nlist" > "$nlist"S
! 3416: fi
! 3417:
! 3418: if test -f "$nlist"S; then
! 3419: eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
! 3420: else
! 3421: echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
! 3422: fi
! 3423:
! 3424: echo >> "$output_objdir/$my_dlsyms" "\
! 3425:
! 3426: /* The mapping between symbol names and symbols. */
! 3427: typedef struct {
! 3428: const char *name;
! 3429: void *address;
! 3430: } lt_dlsymlist;
! 3431: extern LT_DLSYM_CONST lt_dlsymlist
! 3432: lt_${my_prefix}_LTX_preloaded_symbols[];
! 3433: LT_DLSYM_CONST lt_dlsymlist
! 3434: lt_${my_prefix}_LTX_preloaded_symbols[] =
! 3435: {\
! 3436: { \"$my_originator\", (void *) 0 },"
! 3437:
! 3438: case $need_lib_prefix in
! 3439: no)
! 3440: eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
! 3441: ;;
! 3442: *)
! 3443: eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
! 3444: ;;
! 3445: esac
! 3446: echo >> "$output_objdir/$my_dlsyms" "\
! 3447: {0, (void *) 0}
! 3448: };
! 3449:
! 3450: /* This works around a problem in FreeBSD linker */
! 3451: #ifdef FREEBSD_WORKAROUND
! 3452: static const void *lt_preloaded_setup() {
! 3453: return lt_${my_prefix}_LTX_preloaded_symbols;
! 3454: }
! 3455: #endif
! 3456:
! 3457: #ifdef __cplusplus
! 3458: }
! 3459: #endif\
! 3460: "
! 3461: } # !$opt_dry_run
! 3462:
! 3463: pic_flag_for_symtable=
! 3464: case "$compile_command " in
! 3465: *" -static "*) ;;
! 3466: *)
! 3467: case $host in
! 3468: # compiling the symbol table file with pic_flag works around
! 3469: # a FreeBSD bug that causes programs to crash when -lm is
! 3470: # linked before any other PIC object. But we must not use
! 3471: # pic_flag when linking with -static. The problem exists in
! 3472: # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
! 3473: *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
! 3474: pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
! 3475: *-*-hpux*)
! 3476: pic_flag_for_symtable=" $pic_flag" ;;
! 3477: *)
! 3478: if test "X$my_pic_p" != Xno; then
! 3479: pic_flag_for_symtable=" $pic_flag"
! 3480: fi
! 3481: ;;
! 3482: esac
! 3483: ;;
! 3484: esac
! 3485: symtab_cflags=
! 3486: for arg in $LTCFLAGS; do
! 3487: case $arg in
! 3488: -pie | -fpie | -fPIE) ;;
! 3489: *) func_append symtab_cflags " $arg" ;;
! 3490: esac
! 3491: done
! 3492:
! 3493: # Now compile the dynamic symbol file.
! 3494: func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
! 3495:
! 3496: # Clean up the generated files.
! 3497: func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
! 3498:
! 3499: # Transform the symbol file into the correct name.
! 3500: symfileobj="$output_objdir/${my_outputname}S.$objext"
! 3501: case $host in
! 3502: *cygwin* | *mingw* | *cegcc* )
! 3503: if test -f "$output_objdir/$my_outputname.def"; then
! 3504: compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
! 3505: finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
! 3506: else
! 3507: compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
! 3508: finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
! 3509: fi
! 3510: ;;
! 3511: *)
! 3512: compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
! 3513: finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
! 3514: ;;
! 3515: esac
! 3516: ;;
! 3517: *)
! 3518: func_fatal_error "unknown suffix for \`$my_dlsyms'"
! 3519: ;;
! 3520: esac
! 3521: else
! 3522: # We keep going just in case the user didn't refer to
! 3523: # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
! 3524: # really was required.
! 3525:
! 3526: # Nullify the symbol file.
! 3527: compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
! 3528: finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
! 3529: fi
! 3530: }
! 3531:
! 3532: # func_win32_libid arg
! 3533: # return the library type of file 'arg'
! 3534: #
! 3535: # Need a lot of goo to handle *both* DLLs and import libs
! 3536: # Has to be a shell function in order to 'eat' the argument
! 3537: # that is supplied when $file_magic_command is called.
! 3538: # Despite the name, also deal with 64 bit binaries.
! 3539: func_win32_libid ()
! 3540: {
! 3541: $opt_debug
! 3542: win32_libid_type="unknown"
! 3543: win32_fileres=`file -L $1 2>/dev/null`
! 3544: case $win32_fileres in
! 3545: *ar\ archive\ import\ library*) # definitely import
! 3546: win32_libid_type="x86 archive import"
! 3547: ;;
! 3548: *ar\ archive*) # could be an import, or static
! 3549: # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
! 3550: if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
! 3551: $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
! 3552: func_to_tool_file "$1" func_convert_file_msys_to_w32
! 3553: win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
! 3554: $SED -n -e '
! 3555: 1,100{
! 3556: / I /{
! 3557: s,.*,import,
! 3558: p
! 3559: q
! 3560: }
! 3561: }'`
! 3562: case $win32_nmres in
! 3563: import*) win32_libid_type="x86 archive import";;
! 3564: *) win32_libid_type="x86 archive static";;
! 3565: esac
! 3566: fi
! 3567: ;;
! 3568: *DLL*)
! 3569: win32_libid_type="x86 DLL"
! 3570: ;;
! 3571: *executable*) # but shell scripts are "executable" too...
! 3572: case $win32_fileres in
! 3573: *MS\ Windows\ PE\ Intel*)
! 3574: win32_libid_type="x86 DLL"
! 3575: ;;
! 3576: esac
! 3577: ;;
! 3578: esac
! 3579: $ECHO "$win32_libid_type"
! 3580: }
! 3581:
! 3582: # func_cygming_dll_for_implib ARG
! 3583: #
! 3584: # Platform-specific function to extract the
! 3585: # name of the DLL associated with the specified
! 3586: # import library ARG.
! 3587: # Invoked by eval'ing the libtool variable
! 3588: # $sharedlib_from_linklib_cmd
! 3589: # Result is available in the variable
! 3590: # $sharedlib_from_linklib_result
! 3591: func_cygming_dll_for_implib ()
! 3592: {
! 3593: $opt_debug
! 3594: sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
! 3595: }
! 3596:
! 3597: # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
! 3598: #
! 3599: # The is the core of a fallback implementation of a
! 3600: # platform-specific function to extract the name of the
! 3601: # DLL associated with the specified import library LIBNAME.
! 3602: #
! 3603: # SECTION_NAME is either .idata$6 or .idata$7, depending
! 3604: # on the platform and compiler that created the implib.
! 3605: #
! 3606: # Echos the name of the DLL associated with the
! 3607: # specified import library.
! 3608: func_cygming_dll_for_implib_fallback_core ()
! 3609: {
! 3610: $opt_debug
! 3611: match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
! 3612: $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
! 3613: $SED '/^Contents of section '"$match_literal"':/{
! 3614: # Place marker at beginning of archive member dllname section
! 3615: s/.*/====MARK====/
! 3616: p
! 3617: d
! 3618: }
! 3619: # These lines can sometimes be longer than 43 characters, but
! 3620: # are always uninteresting
! 3621: /:[ ]*file format pe[i]\{,1\}-/d
! 3622: /^In archive [^:]*:/d
! 3623: # Ensure marker is printed
! 3624: /^====MARK====/p
! 3625: # Remove all lines with less than 43 characters
! 3626: /^.\{43\}/!d
! 3627: # From remaining lines, remove first 43 characters
! 3628: s/^.\{43\}//' |
! 3629: $SED -n '
! 3630: # Join marker and all lines until next marker into a single line
! 3631: /^====MARK====/ b para
! 3632: H
! 3633: $ b para
! 3634: b
! 3635: :para
! 3636: x
! 3637: s/\n//g
! 3638: # Remove the marker
! 3639: s/^====MARK====//
! 3640: # Remove trailing dots and whitespace
! 3641: s/[\. \t]*$//
! 3642: # Print
! 3643: /./p' |
! 3644: # we now have a list, one entry per line, of the stringified
! 3645: # contents of the appropriate section of all members of the
! 3646: # archive which possess that section. Heuristic: eliminate
! 3647: # all those which have a first or second character that is
! 3648: # a '.' (that is, objdump's representation of an unprintable
! 3649: # character.) This should work for all archives with less than
! 3650: # 0x302f exports -- but will fail for DLLs whose name actually
! 3651: # begins with a literal '.' or a single character followed by
! 3652: # a '.'.
! 3653: #
! 3654: # Of those that remain, print the first one.
! 3655: $SED -e '/^\./d;/^.\./d;q'
! 3656: }
! 3657:
! 3658: # func_cygming_gnu_implib_p ARG
! 3659: # This predicate returns with zero status (TRUE) if
! 3660: # ARG is a GNU/binutils-style import library. Returns
! 3661: # with nonzero status (FALSE) otherwise.
! 3662: func_cygming_gnu_implib_p ()
! 3663: {
! 3664: $opt_debug
! 3665: func_to_tool_file "$1" func_convert_file_msys_to_w32
! 3666: func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
! 3667: test -n "$func_cygming_gnu_implib_tmp"
! 3668: }
! 3669:
! 3670: # func_cygming_ms_implib_p ARG
! 3671: # This predicate returns with zero status (TRUE) if
! 3672: # ARG is an MS-style import library. Returns
! 3673: # with nonzero status (FALSE) otherwise.
! 3674: func_cygming_ms_implib_p ()
! 3675: {
! 3676: $opt_debug
! 3677: func_to_tool_file "$1" func_convert_file_msys_to_w32
! 3678: func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
! 3679: test -n "$func_cygming_ms_implib_tmp"
! 3680: }
! 3681:
! 3682: # func_cygming_dll_for_implib_fallback ARG
! 3683: # Platform-specific function to extract the
! 3684: # name of the DLL associated with the specified
! 3685: # import library ARG.
! 3686: #
! 3687: # This fallback implementation is for use when $DLLTOOL
! 3688: # does not support the --identify-strict option.
! 3689: # Invoked by eval'ing the libtool variable
! 3690: # $sharedlib_from_linklib_cmd
! 3691: # Result is available in the variable
! 3692: # $sharedlib_from_linklib_result
! 3693: func_cygming_dll_for_implib_fallback ()
! 3694: {
! 3695: $opt_debug
! 3696: if func_cygming_gnu_implib_p "$1" ; then
! 3697: # binutils import library
! 3698: sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
! 3699: elif func_cygming_ms_implib_p "$1" ; then
! 3700: # ms-generated import library
! 3701: sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
! 3702: else
! 3703: # unknown
! 3704: sharedlib_from_linklib_result=""
! 3705: fi
! 3706: }
! 3707:
! 3708:
! 3709: # func_extract_an_archive dir oldlib
! 3710: func_extract_an_archive ()
! 3711: {
! 3712: $opt_debug
! 3713: f_ex_an_ar_dir="$1"; shift
! 3714: f_ex_an_ar_oldlib="$1"
! 3715: if test "$lock_old_archive_extraction" = yes; then
! 3716: lockfile=$f_ex_an_ar_oldlib.lock
! 3717: until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
! 3718: func_echo "Waiting for $lockfile to be removed"
! 3719: sleep 2
! 3720: done
! 3721: fi
! 3722: func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
! 3723: 'stat=$?; rm -f "$lockfile"; exit $stat'
! 3724: if test "$lock_old_archive_extraction" = yes; then
! 3725: $opt_dry_run || rm -f "$lockfile"
! 3726: fi
! 3727: if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
! 3728: :
! 3729: else
! 3730: func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
! 3731: fi
! 3732: }
! 3733:
! 3734:
! 3735: # func_extract_archives gentop oldlib ...
! 3736: func_extract_archives ()
! 3737: {
! 3738: $opt_debug
! 3739: my_gentop="$1"; shift
! 3740: my_oldlibs=${1+"$@"}
! 3741: my_oldobjs=""
! 3742: my_xlib=""
! 3743: my_xabs=""
! 3744: my_xdir=""
! 3745:
! 3746: for my_xlib in $my_oldlibs; do
! 3747: # Extract the objects.
! 3748: case $my_xlib in
! 3749: [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
! 3750: *) my_xabs=`pwd`"/$my_xlib" ;;
! 3751: esac
! 3752: func_basename "$my_xlib"
! 3753: my_xlib="$func_basename_result"
! 3754: my_xlib_u=$my_xlib
! 3755: while :; do
! 3756: case " $extracted_archives " in
! 3757: *" $my_xlib_u "*)
! 3758: func_arith $extracted_serial + 1
! 3759: extracted_serial=$func_arith_result
! 3760: my_xlib_u=lt$extracted_serial-$my_xlib ;;
! 3761: *) break ;;
! 3762: esac
! 3763: done
! 3764: extracted_archives="$extracted_archives $my_xlib_u"
! 3765: my_xdir="$my_gentop/$my_xlib_u"
! 3766:
! 3767: func_mkdir_p "$my_xdir"
! 3768:
! 3769: case $host in
! 3770: *-darwin*)
! 3771: func_verbose "Extracting $my_xabs"
! 3772: # Do not bother doing anything if just a dry run
! 3773: $opt_dry_run || {
! 3774: darwin_orig_dir=`pwd`
! 3775: cd $my_xdir || exit $?
! 3776: darwin_archive=$my_xabs
! 3777: darwin_curdir=`pwd`
! 3778: darwin_base_archive=`basename "$darwin_archive"`
! 3779: darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
! 3780: if test -n "$darwin_arches"; then
! 3781: darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
! 3782: darwin_arch=
! 3783: func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
! 3784: for darwin_arch in $darwin_arches ; do
! 3785: func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
! 3786: $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
! 3787: cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
! 3788: func_extract_an_archive "`pwd`" "${darwin_base_archive}"
! 3789: cd "$darwin_curdir"
! 3790: $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
! 3791: done # $darwin_arches
! 3792: ## Okay now we've a bunch of thin objects, gotta fatten them up :)
! 3793: darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
! 3794: darwin_file=
! 3795: darwin_files=
! 3796: for darwin_file in $darwin_filelist; do
! 3797: darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
! 3798: $LIPO -create -output "$darwin_file" $darwin_files
! 3799: done # $darwin_filelist
! 3800: $RM -rf unfat-$$
! 3801: cd "$darwin_orig_dir"
! 3802: else
! 3803: cd $darwin_orig_dir
! 3804: func_extract_an_archive "$my_xdir" "$my_xabs"
! 3805: fi # $darwin_arches
! 3806: } # !$opt_dry_run
! 3807: ;;
! 3808: *)
! 3809: func_extract_an_archive "$my_xdir" "$my_xabs"
! 3810: ;;
! 3811: esac
! 3812: my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
! 3813: done
! 3814:
! 3815: func_extract_archives_result="$my_oldobjs"
! 3816: }
! 3817:
! 3818:
! 3819: # func_emit_wrapper [arg=no]
! 3820: #
! 3821: # Emit a libtool wrapper script on stdout.
! 3822: # Don't directly open a file because we may want to
! 3823: # incorporate the script contents within a cygwin/mingw
! 3824: # wrapper executable. Must ONLY be called from within
! 3825: # func_mode_link because it depends on a number of variables
! 3826: # set therein.
! 3827: #
! 3828: # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
! 3829: # variable will take. If 'yes', then the emitted script
! 3830: # will assume that the directory in which it is stored is
! 3831: # the $objdir directory. This is a cygwin/mingw-specific
! 3832: # behavior.
! 3833: func_emit_wrapper ()
! 3834: {
! 3835: func_emit_wrapper_arg1=${1-no}
! 3836:
! 3837: $ECHO "\
! 3838: #! $SHELL
! 3839:
! 3840: # $output - temporary wrapper script for $objdir/$outputname
! 3841: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 3842: #
! 3843: # The $output program cannot be directly executed until all the libtool
! 3844: # libraries that it depends on are installed.
! 3845: #
! 3846: # This wrapper script should never be moved out of the build directory.
! 3847: # If it is, it will not operate correctly.
! 3848:
! 3849: # Sed substitution that helps us do robust quoting. It backslashifies
! 3850: # metacharacters that are still active within double-quoted strings.
! 3851: sed_quote_subst='$sed_quote_subst'
! 3852:
! 3853: # Be Bourne compatible
! 3854: if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
! 3855: emulate sh
! 3856: NULLCMD=:
! 3857: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
! 3858: # is contrary to our usage. Disable this feature.
! 3859: alias -g '\${1+\"\$@\"}'='\"\$@\"'
! 3860: setopt NO_GLOB_SUBST
! 3861: else
! 3862: case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
! 3863: fi
! 3864: BIN_SH=xpg4; export BIN_SH # for Tru64
! 3865: DUALCASE=1; export DUALCASE # for MKS sh
! 3866:
! 3867: # The HP-UX ksh and POSIX shell print the target directory to stdout
! 3868: # if CDPATH is set.
! 3869: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
! 3870:
! 3871: relink_command=\"$relink_command\"
! 3872:
! 3873: # This environment variable determines our operation mode.
! 3874: if test \"\$libtool_install_magic\" = \"$magic\"; then
! 3875: # install mode needs the following variables:
! 3876: generated_by_libtool_version='$macro_version'
! 3877: notinst_deplibs='$notinst_deplibs'
! 3878: else
! 3879: # When we are sourced in execute mode, \$file and \$ECHO are already set.
! 3880: if test \"\$libtool_execute_magic\" != \"$magic\"; then
! 3881: file=\"\$0\""
! 3882:
! 3883: qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
! 3884: $ECHO "\
! 3885:
! 3886: # A function that is used when there is no print builtin or printf.
! 3887: func_fallback_echo ()
! 3888: {
! 3889: eval 'cat <<_LTECHO_EOF
! 3890: \$1
! 3891: _LTECHO_EOF'
! 3892: }
! 3893: ECHO=\"$qECHO\"
! 3894: fi
! 3895:
! 3896: # Very basic option parsing. These options are (a) specific to
! 3897: # the libtool wrapper, (b) are identical between the wrapper
! 3898: # /script/ and the wrapper /executable/ which is used only on
! 3899: # windows platforms, and (c) all begin with the string "--lt-"
! 3900: # (application programs are unlikely to have options which match
! 3901: # this pattern).
! 3902: #
! 3903: # There are only two supported options: --lt-debug and
! 3904: # --lt-dump-script. There is, deliberately, no --lt-help.
! 3905: #
! 3906: # The first argument to this parsing function should be the
! 3907: # script's $0 value, followed by "$@".
! 3908: lt_option_debug=
! 3909: func_parse_lt_options ()
! 3910: {
! 3911: lt_script_arg0=\$0
! 3912: shift
! 3913: for lt_opt
! 3914: do
! 3915: case \"\$lt_opt\" in
! 3916: --lt-debug) lt_option_debug=1 ;;
! 3917: --lt-dump-script)
! 3918: lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
! 3919: test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
! 3920: lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
! 3921: cat \"\$lt_dump_D/\$lt_dump_F\"
! 3922: exit 0
! 3923: ;;
! 3924: --lt-*)
! 3925: \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
! 3926: exit 1
! 3927: ;;
! 3928: esac
! 3929: done
! 3930:
! 3931: # Print the debug banner immediately:
! 3932: if test -n \"\$lt_option_debug\"; then
! 3933: echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
! 3934: fi
! 3935: }
! 3936:
! 3937: # Used when --lt-debug. Prints its arguments to stdout
! 3938: # (redirection is the responsibility of the caller)
! 3939: func_lt_dump_args ()
! 3940: {
! 3941: lt_dump_args_N=1;
! 3942: for lt_arg
! 3943: do
! 3944: \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
! 3945: lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
! 3946: done
! 3947: }
! 3948:
! 3949: # Core function for launching the target application
! 3950: func_exec_program_core ()
! 3951: {
! 3952: "
! 3953: case $host in
! 3954: # Backslashes separate directories on plain windows
! 3955: *-*-mingw | *-*-os2* | *-cegcc*)
! 3956: $ECHO "\
! 3957: if test -n \"\$lt_option_debug\"; then
! 3958: \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
! 3959: func_lt_dump_args \${1+\"\$@\"} 1>&2
! 3960: fi
! 3961: exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
! 3962: "
! 3963: ;;
! 3964:
! 3965: *)
! 3966: $ECHO "\
! 3967: if test -n \"\$lt_option_debug\"; then
! 3968: \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
! 3969: func_lt_dump_args \${1+\"\$@\"} 1>&2
! 3970: fi
! 3971: exec \"\$progdir/\$program\" \${1+\"\$@\"}
! 3972: "
! 3973: ;;
! 3974: esac
! 3975: $ECHO "\
! 3976: \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
! 3977: exit 1
! 3978: }
! 3979:
! 3980: # A function to encapsulate launching the target application
! 3981: # Strips options in the --lt-* namespace from \$@ and
! 3982: # launches target application with the remaining arguments.
! 3983: func_exec_program ()
! 3984: {
! 3985: for lt_wr_arg
! 3986: do
! 3987: case \$lt_wr_arg in
! 3988: --lt-*) ;;
! 3989: *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
! 3990: esac
! 3991: shift
! 3992: done
! 3993: func_exec_program_core \${1+\"\$@\"}
! 3994: }
! 3995:
! 3996: # Parse options
! 3997: func_parse_lt_options \"\$0\" \${1+\"\$@\"}
! 3998:
! 3999: # Find the directory that this script lives in.
! 4000: thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
! 4001: test \"x\$thisdir\" = \"x\$file\" && thisdir=.
! 4002:
! 4003: # Follow symbolic links until we get to the real thisdir.
! 4004: file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
! 4005: while test -n \"\$file\"; do
! 4006: destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
! 4007:
! 4008: # If there was a directory component, then change thisdir.
! 4009: if test \"x\$destdir\" != \"x\$file\"; then
! 4010: case \"\$destdir\" in
! 4011: [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
! 4012: *) thisdir=\"\$thisdir/\$destdir\" ;;
! 4013: esac
! 4014: fi
! 4015:
! 4016: file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
! 4017: file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
! 4018: done
! 4019:
! 4020: # Usually 'no', except on cygwin/mingw when embedded into
! 4021: # the cwrapper.
! 4022: WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
! 4023: if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
! 4024: # special case for '.'
! 4025: if test \"\$thisdir\" = \".\"; then
! 4026: thisdir=\`pwd\`
! 4027: fi
! 4028: # remove .libs from thisdir
! 4029: case \"\$thisdir\" in
! 4030: *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
! 4031: $objdir ) thisdir=. ;;
! 4032: esac
! 4033: fi
! 4034:
! 4035: # Try to get the absolute directory name.
! 4036: absdir=\`cd \"\$thisdir\" && pwd\`
! 4037: test -n \"\$absdir\" && thisdir=\"\$absdir\"
! 4038: "
! 4039:
! 4040: if test "$fast_install" = yes; then
! 4041: $ECHO "\
! 4042: program=lt-'$outputname'$exeext
! 4043: progdir=\"\$thisdir/$objdir\"
! 4044:
! 4045: if test ! -f \"\$progdir/\$program\" ||
! 4046: { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
! 4047: test \"X\$file\" != \"X\$progdir/\$program\"; }; then
! 4048:
! 4049: file=\"\$\$-\$program\"
! 4050:
! 4051: if test ! -d \"\$progdir\"; then
! 4052: $MKDIR \"\$progdir\"
! 4053: else
! 4054: $RM \"\$progdir/\$file\"
! 4055: fi"
! 4056:
! 4057: $ECHO "\
! 4058:
! 4059: # relink executable if necessary
! 4060: if test -n \"\$relink_command\"; then
! 4061: if relink_command_output=\`eval \$relink_command 2>&1\`; then :
! 4062: else
! 4063: $ECHO \"\$relink_command_output\" >&2
! 4064: $RM \"\$progdir/\$file\"
! 4065: exit 1
! 4066: fi
! 4067: fi
! 4068:
! 4069: $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
! 4070: { $RM \"\$progdir/\$program\";
! 4071: $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
! 4072: $RM \"\$progdir/\$file\"
! 4073: fi"
! 4074: else
! 4075: $ECHO "\
! 4076: program='$outputname'
! 4077: progdir=\"\$thisdir/$objdir\"
! 4078: "
! 4079: fi
! 4080:
! 4081: $ECHO "\
! 4082:
! 4083: if test -f \"\$progdir/\$program\"; then"
! 4084:
! 4085: # fixup the dll searchpath if we need to.
! 4086: #
! 4087: # Fix the DLL searchpath if we need to. Do this before prepending
! 4088: # to shlibpath, because on Windows, both are PATH and uninstalled
! 4089: # libraries must come first.
! 4090: if test -n "$dllsearchpath"; then
! 4091: $ECHO "\
! 4092: # Add the dll search path components to the executable PATH
! 4093: PATH=$dllsearchpath:\$PATH
! 4094: "
! 4095: fi
! 4096:
! 4097: # Export our shlibpath_var if we have one.
! 4098: if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
! 4099: $ECHO "\
! 4100: # Add our own library path to $shlibpath_var
! 4101: $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
! 4102:
! 4103: # Some systems cannot cope with colon-terminated $shlibpath_var
! 4104: # The second colon is a workaround for a bug in BeOS R4 sed
! 4105: $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
! 4106:
! 4107: export $shlibpath_var
! 4108: "
! 4109: fi
! 4110:
! 4111: $ECHO "\
! 4112: if test \"\$libtool_execute_magic\" != \"$magic\"; then
! 4113: # Run the actual program with our arguments.
! 4114: func_exec_program \${1+\"\$@\"}
! 4115: fi
! 4116: else
! 4117: # The program doesn't exist.
! 4118: \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
! 4119: \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
! 4120: \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
! 4121: exit 1
! 4122: fi
! 4123: fi\
! 4124: "
! 4125: }
! 4126:
! 4127:
! 4128: # func_emit_cwrapperexe_src
! 4129: # emit the source code for a wrapper executable on stdout
! 4130: # Must ONLY be called from within func_mode_link because
! 4131: # it depends on a number of variable set therein.
! 4132: func_emit_cwrapperexe_src ()
! 4133: {
! 4134: cat <<EOF
! 4135:
! 4136: /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
! 4137: Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 4138:
! 4139: The $output program cannot be directly executed until all the libtool
! 4140: libraries that it depends on are installed.
! 4141:
! 4142: This wrapper executable should never be moved out of the build directory.
! 4143: If it is, it will not operate correctly.
! 4144: */
! 4145: EOF
! 4146: cat <<"EOF"
! 4147: #ifdef _MSC_VER
! 4148: # define _CRT_SECURE_NO_DEPRECATE 1
! 4149: #endif
! 4150: #include <stdio.h>
! 4151: #include <stdlib.h>
! 4152: #ifdef _MSC_VER
! 4153: # include <direct.h>
! 4154: # include <process.h>
! 4155: # include <io.h>
! 4156: #else
! 4157: # include <unistd.h>
! 4158: # include <stdint.h>
! 4159: # ifdef __CYGWIN__
! 4160: # include <io.h>
! 4161: # endif
! 4162: #endif
! 4163: #include <malloc.h>
! 4164: #include <stdarg.h>
! 4165: #include <assert.h>
! 4166: #include <string.h>
! 4167: #include <ctype.h>
! 4168: #include <errno.h>
! 4169: #include <fcntl.h>
! 4170: #include <sys/stat.h>
! 4171:
! 4172: /* declarations of non-ANSI functions */
! 4173: #if defined(__MINGW32__)
! 4174: # ifdef __STRICT_ANSI__
! 4175: int _putenv (const char *);
! 4176: # endif
! 4177: #elif defined(__CYGWIN__)
! 4178: # ifdef __STRICT_ANSI__
! 4179: char *realpath (const char *, char *);
! 4180: int putenv (char *);
! 4181: int setenv (const char *, const char *, int);
! 4182: # endif
! 4183: /* #elif defined (other platforms) ... */
! 4184: #endif
! 4185:
! 4186: /* portability defines, excluding path handling macros */
! 4187: #if defined(_MSC_VER)
! 4188: # define setmode _setmode
! 4189: # define stat _stat
! 4190: # define chmod _chmod
! 4191: # define getcwd _getcwd
! 4192: # define putenv _putenv
! 4193: # define S_IXUSR _S_IEXEC
! 4194: # ifndef _INTPTR_T_DEFINED
! 4195: # define _INTPTR_T_DEFINED
! 4196: # define intptr_t int
! 4197: # endif
! 4198: #elif defined(__MINGW32__)
! 4199: # define setmode _setmode
! 4200: # define stat _stat
! 4201: # define chmod _chmod
! 4202: # define getcwd _getcwd
! 4203: # define putenv _putenv
! 4204: #elif defined(__CYGWIN__)
! 4205: # define HAVE_SETENV
! 4206: # define FOPEN_WB "wb"
! 4207: /* #elif defined (other platforms) ... */
! 4208: #endif
! 4209:
! 4210: #if defined(PATH_MAX)
! 4211: # define LT_PATHMAX PATH_MAX
! 4212: #elif defined(MAXPATHLEN)
! 4213: # define LT_PATHMAX MAXPATHLEN
! 4214: #else
! 4215: # define LT_PATHMAX 1024
! 4216: #endif
! 4217:
! 4218: #ifndef S_IXOTH
! 4219: # define S_IXOTH 0
! 4220: #endif
! 4221: #ifndef S_IXGRP
! 4222: # define S_IXGRP 0
! 4223: #endif
! 4224:
! 4225: /* path handling portability macros */
! 4226: #ifndef DIR_SEPARATOR
! 4227: # define DIR_SEPARATOR '/'
! 4228: # define PATH_SEPARATOR ':'
! 4229: #endif
! 4230:
! 4231: #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
! 4232: defined (__OS2__)
! 4233: # define HAVE_DOS_BASED_FILE_SYSTEM
! 4234: # define FOPEN_WB "wb"
! 4235: # ifndef DIR_SEPARATOR_2
! 4236: # define DIR_SEPARATOR_2 '\\'
! 4237: # endif
! 4238: # ifndef PATH_SEPARATOR_2
! 4239: # define PATH_SEPARATOR_2 ';'
! 4240: # endif
! 4241: #endif
! 4242:
! 4243: #ifndef DIR_SEPARATOR_2
! 4244: # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
! 4245: #else /* DIR_SEPARATOR_2 */
! 4246: # define IS_DIR_SEPARATOR(ch) \
! 4247: (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
! 4248: #endif /* DIR_SEPARATOR_2 */
! 4249:
! 4250: #ifndef PATH_SEPARATOR_2
! 4251: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
! 4252: #else /* PATH_SEPARATOR_2 */
! 4253: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
! 4254: #endif /* PATH_SEPARATOR_2 */
! 4255:
! 4256: #ifndef FOPEN_WB
! 4257: # define FOPEN_WB "w"
! 4258: #endif
! 4259: #ifndef _O_BINARY
! 4260: # define _O_BINARY 0
! 4261: #endif
! 4262:
! 4263: #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
! 4264: #define XFREE(stale) do { \
! 4265: if (stale) { free ((void *) stale); stale = 0; } \
! 4266: } while (0)
! 4267:
! 4268: #if defined(LT_DEBUGWRAPPER)
! 4269: static int lt_debug = 1;
! 4270: #else
! 4271: static int lt_debug = 0;
! 4272: #endif
! 4273:
! 4274: const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
! 4275:
! 4276: void *xmalloc (size_t num);
! 4277: char *xstrdup (const char *string);
! 4278: const char *base_name (const char *name);
! 4279: char *find_executable (const char *wrapper);
! 4280: char *chase_symlinks (const char *pathspec);
! 4281: int make_executable (const char *path);
! 4282: int check_executable (const char *path);
! 4283: char *strendzap (char *str, const char *pat);
! 4284: void lt_debugprintf (const char *file, int line, const char *fmt, ...);
! 4285: void lt_fatal (const char *file, int line, const char *message, ...);
! 4286: static const char *nonnull (const char *s);
! 4287: static const char *nonempty (const char *s);
! 4288: void lt_setenv (const char *name, const char *value);
! 4289: char *lt_extend_str (const char *orig_value, const char *add, int to_end);
! 4290: void lt_update_exe_path (const char *name, const char *value);
! 4291: void lt_update_lib_path (const char *name, const char *value);
! 4292: char **prepare_spawn (char **argv);
! 4293: void lt_dump_script (FILE *f);
! 4294: EOF
! 4295:
! 4296: cat <<EOF
! 4297: volatile const char * MAGIC_EXE = "$magic_exe";
! 4298: const char * LIB_PATH_VARNAME = "$shlibpath_var";
! 4299: EOF
! 4300:
! 4301: if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
! 4302: func_to_host_path "$temp_rpath"
! 4303: cat <<EOF
! 4304: const char * LIB_PATH_VALUE = "$func_to_host_path_result";
! 4305: EOF
! 4306: else
! 4307: cat <<"EOF"
! 4308: const char * LIB_PATH_VALUE = "";
! 4309: EOF
! 4310: fi
! 4311:
! 4312: if test -n "$dllsearchpath"; then
! 4313: func_to_host_path "$dllsearchpath:"
! 4314: cat <<EOF
! 4315: const char * EXE_PATH_VARNAME = "PATH";
! 4316: const char * EXE_PATH_VALUE = "$func_to_host_path_result";
! 4317: EOF
! 4318: else
! 4319: cat <<"EOF"
! 4320: const char * EXE_PATH_VARNAME = "";
! 4321: const char * EXE_PATH_VALUE = "";
! 4322: EOF
! 4323: fi
! 4324:
! 4325: if test "$fast_install" = yes; then
! 4326: cat <<EOF
! 4327: const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
! 4328: EOF
! 4329: else
! 4330: cat <<EOF
! 4331: const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
! 4332: EOF
! 4333: fi
! 4334:
! 4335:
! 4336: cat <<"EOF"
! 4337:
! 4338: #define LTWRAPPER_OPTION_PREFIX "--lt-"
! 4339:
! 4340: static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
! 4341: static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
! 4342: static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
! 4343:
! 4344: int
! 4345: main (int argc, char *argv[])
! 4346: {
! 4347: char **newargz;
! 4348: int newargc;
! 4349: char *tmp_pathspec;
! 4350: char *actual_cwrapper_path;
! 4351: char *actual_cwrapper_name;
! 4352: char *target_name;
! 4353: char *lt_argv_zero;
! 4354: intptr_t rval = 127;
! 4355:
! 4356: int i;
! 4357:
! 4358: program_name = (char *) xstrdup (base_name (argv[0]));
! 4359: newargz = XMALLOC (char *, argc + 1);
! 4360:
! 4361: /* very simple arg parsing; don't want to rely on getopt
! 4362: * also, copy all non cwrapper options to newargz, except
! 4363: * argz[0], which is handled differently
! 4364: */
! 4365: newargc=0;
! 4366: for (i = 1; i < argc; i++)
! 4367: {
! 4368: if (strcmp (argv[i], dumpscript_opt) == 0)
! 4369: {
! 4370: EOF
! 4371: case "$host" in
! 4372: *mingw* | *cygwin* )
! 4373: # make stdout use "unix" line endings
! 4374: echo " setmode(1,_O_BINARY);"
! 4375: ;;
! 4376: esac
! 4377:
! 4378: cat <<"EOF"
! 4379: lt_dump_script (stdout);
! 4380: return 0;
! 4381: }
! 4382: if (strcmp (argv[i], debug_opt) == 0)
! 4383: {
! 4384: lt_debug = 1;
! 4385: continue;
! 4386: }
! 4387: if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
! 4388: {
! 4389: /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
! 4390: namespace, but it is not one of the ones we know about and
! 4391: have already dealt with, above (inluding dump-script), then
! 4392: report an error. Otherwise, targets might begin to believe
! 4393: they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
! 4394: namespace. The first time any user complains about this, we'll
! 4395: need to make LTWRAPPER_OPTION_PREFIX a configure-time option
! 4396: or a configure.ac-settable value.
! 4397: */
! 4398: lt_fatal (__FILE__, __LINE__,
! 4399: "unrecognized %s option: '%s'",
! 4400: ltwrapper_option_prefix, argv[i]);
! 4401: }
! 4402: /* otherwise ... */
! 4403: newargz[++newargc] = xstrdup (argv[i]);
! 4404: }
! 4405: newargz[++newargc] = NULL;
! 4406:
! 4407: EOF
! 4408: cat <<EOF
! 4409: /* The GNU banner must be the first non-error debug message */
! 4410: lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
! 4411: EOF
! 4412: cat <<"EOF"
! 4413: lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
! 4414: lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
! 4415:
! 4416: tmp_pathspec = find_executable (argv[0]);
! 4417: if (tmp_pathspec == NULL)
! 4418: lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
! 4419: lt_debugprintf (__FILE__, __LINE__,
! 4420: "(main) found exe (before symlink chase) at: %s\n",
! 4421: tmp_pathspec);
! 4422:
! 4423: actual_cwrapper_path = chase_symlinks (tmp_pathspec);
! 4424: lt_debugprintf (__FILE__, __LINE__,
! 4425: "(main) found exe (after symlink chase) at: %s\n",
! 4426: actual_cwrapper_path);
! 4427: XFREE (tmp_pathspec);
! 4428:
! 4429: actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
! 4430: strendzap (actual_cwrapper_path, actual_cwrapper_name);
! 4431:
! 4432: /* wrapper name transforms */
! 4433: strendzap (actual_cwrapper_name, ".exe");
! 4434: tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
! 4435: XFREE (actual_cwrapper_name);
! 4436: actual_cwrapper_name = tmp_pathspec;
! 4437: tmp_pathspec = 0;
! 4438:
! 4439: /* target_name transforms -- use actual target program name; might have lt- prefix */
! 4440: target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
! 4441: strendzap (target_name, ".exe");
! 4442: tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
! 4443: XFREE (target_name);
! 4444: target_name = tmp_pathspec;
! 4445: tmp_pathspec = 0;
! 4446:
! 4447: lt_debugprintf (__FILE__, __LINE__,
! 4448: "(main) libtool target name: %s\n",
! 4449: target_name);
! 4450: EOF
! 4451:
! 4452: cat <<EOF
! 4453: newargz[0] =
! 4454: XMALLOC (char, (strlen (actual_cwrapper_path) +
! 4455: strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
! 4456: strcpy (newargz[0], actual_cwrapper_path);
! 4457: strcat (newargz[0], "$objdir");
! 4458: strcat (newargz[0], "/");
! 4459: EOF
! 4460:
! 4461: cat <<"EOF"
! 4462: /* stop here, and copy so we don't have to do this twice */
! 4463: tmp_pathspec = xstrdup (newargz[0]);
! 4464:
! 4465: /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
! 4466: strcat (newargz[0], actual_cwrapper_name);
! 4467:
! 4468: /* DO want the lt- prefix here if it exists, so use target_name */
! 4469: lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
! 4470: XFREE (tmp_pathspec);
! 4471: tmp_pathspec = NULL;
! 4472: EOF
! 4473:
! 4474: case $host_os in
! 4475: mingw*)
! 4476: cat <<"EOF"
! 4477: {
! 4478: char* p;
! 4479: while ((p = strchr (newargz[0], '\\')) != NULL)
! 4480: {
! 4481: *p = '/';
! 4482: }
! 4483: while ((p = strchr (lt_argv_zero, '\\')) != NULL)
! 4484: {
! 4485: *p = '/';
! 4486: }
! 4487: }
! 4488: EOF
! 4489: ;;
! 4490: esac
! 4491:
! 4492: cat <<"EOF"
! 4493: XFREE (target_name);
! 4494: XFREE (actual_cwrapper_path);
! 4495: XFREE (actual_cwrapper_name);
! 4496:
! 4497: lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
! 4498: lt_setenv ("DUALCASE", "1"); /* for MSK sh */
! 4499: /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
! 4500: be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
! 4501: because on Windows, both *_VARNAMEs are PATH but uninstalled
! 4502: libraries must come first. */
! 4503: lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
! 4504: lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
! 4505:
! 4506: lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
! 4507: nonnull (lt_argv_zero));
! 4508: for (i = 0; i < newargc; i++)
! 4509: {
! 4510: lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
! 4511: i, nonnull (newargz[i]));
! 4512: }
! 4513:
! 4514: EOF
! 4515:
! 4516: case $host_os in
! 4517: mingw*)
! 4518: cat <<"EOF"
! 4519: /* execv doesn't actually work on mingw as expected on unix */
! 4520: newargz = prepare_spawn (newargz);
! 4521: rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
! 4522: if (rval == -1)
! 4523: {
! 4524: /* failed to start process */
! 4525: lt_debugprintf (__FILE__, __LINE__,
! 4526: "(main) failed to launch target \"%s\": %s\n",
! 4527: lt_argv_zero, nonnull (strerror (errno)));
! 4528: return 127;
! 4529: }
! 4530: return rval;
! 4531: EOF
! 4532: ;;
! 4533: *)
! 4534: cat <<"EOF"
! 4535: execv (lt_argv_zero, newargz);
! 4536: return rval; /* =127, but avoids unused variable warning */
! 4537: EOF
! 4538: ;;
! 4539: esac
! 4540:
! 4541: cat <<"EOF"
! 4542: }
! 4543:
! 4544: void *
! 4545: xmalloc (size_t num)
! 4546: {
! 4547: void *p = (void *) malloc (num);
! 4548: if (!p)
! 4549: lt_fatal (__FILE__, __LINE__, "memory exhausted");
! 4550:
! 4551: return p;
! 4552: }
! 4553:
! 4554: char *
! 4555: xstrdup (const char *string)
! 4556: {
! 4557: return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
! 4558: string) : NULL;
! 4559: }
! 4560:
! 4561: const char *
! 4562: base_name (const char *name)
! 4563: {
! 4564: const char *base;
! 4565:
! 4566: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 4567: /* Skip over the disk name in MSDOS pathnames. */
! 4568: if (isalpha ((unsigned char) name[0]) && name[1] == ':')
! 4569: name += 2;
! 4570: #endif
! 4571:
! 4572: for (base = name; *name; name++)
! 4573: if (IS_DIR_SEPARATOR (*name))
! 4574: base = name + 1;
! 4575: return base;
! 4576: }
! 4577:
! 4578: int
! 4579: check_executable (const char *path)
! 4580: {
! 4581: struct stat st;
! 4582:
! 4583: lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
! 4584: nonempty (path));
! 4585: if ((!path) || (!*path))
! 4586: return 0;
! 4587:
! 4588: if ((stat (path, &st) >= 0)
! 4589: && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
! 4590: return 1;
! 4591: else
! 4592: return 0;
! 4593: }
! 4594:
! 4595: int
! 4596: make_executable (const char *path)
! 4597: {
! 4598: int rval = 0;
! 4599: struct stat st;
! 4600:
! 4601: lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
! 4602: nonempty (path));
! 4603: if ((!path) || (!*path))
! 4604: return 0;
! 4605:
! 4606: if (stat (path, &st) >= 0)
! 4607: {
! 4608: rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
! 4609: }
! 4610: return rval;
! 4611: }
! 4612:
! 4613: /* Searches for the full path of the wrapper. Returns
! 4614: newly allocated full path name if found, NULL otherwise
! 4615: Does not chase symlinks, even on platforms that support them.
! 4616: */
! 4617: char *
! 4618: find_executable (const char *wrapper)
! 4619: {
! 4620: int has_slash = 0;
! 4621: const char *p;
! 4622: const char *p_next;
! 4623: /* static buffer for getcwd */
! 4624: char tmp[LT_PATHMAX + 1];
! 4625: int tmp_len;
! 4626: char *concat_name;
! 4627:
! 4628: lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
! 4629: nonempty (wrapper));
! 4630:
! 4631: if ((wrapper == NULL) || (*wrapper == '\0'))
! 4632: return NULL;
! 4633:
! 4634: /* Absolute path? */
! 4635: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 4636: if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
! 4637: {
! 4638: concat_name = xstrdup (wrapper);
! 4639: if (check_executable (concat_name))
! 4640: return concat_name;
! 4641: XFREE (concat_name);
! 4642: }
! 4643: else
! 4644: {
! 4645: #endif
! 4646: if (IS_DIR_SEPARATOR (wrapper[0]))
! 4647: {
! 4648: concat_name = xstrdup (wrapper);
! 4649: if (check_executable (concat_name))
! 4650: return concat_name;
! 4651: XFREE (concat_name);
! 4652: }
! 4653: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 4654: }
! 4655: #endif
! 4656:
! 4657: for (p = wrapper; *p; p++)
! 4658: if (*p == '/')
! 4659: {
! 4660: has_slash = 1;
! 4661: break;
! 4662: }
! 4663: if (!has_slash)
! 4664: {
! 4665: /* no slashes; search PATH */
! 4666: const char *path = getenv ("PATH");
! 4667: if (path != NULL)
! 4668: {
! 4669: for (p = path; *p; p = p_next)
! 4670: {
! 4671: const char *q;
! 4672: size_t p_len;
! 4673: for (q = p; *q; q++)
! 4674: if (IS_PATH_SEPARATOR (*q))
! 4675: break;
! 4676: p_len = q - p;
! 4677: p_next = (*q == '\0' ? q : q + 1);
! 4678: if (p_len == 0)
! 4679: {
! 4680: /* empty path: current directory */
! 4681: if (getcwd (tmp, LT_PATHMAX) == NULL)
! 4682: lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
! 4683: nonnull (strerror (errno)));
! 4684: tmp_len = strlen (tmp);
! 4685: concat_name =
! 4686: XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
! 4687: memcpy (concat_name, tmp, tmp_len);
! 4688: concat_name[tmp_len] = '/';
! 4689: strcpy (concat_name + tmp_len + 1, wrapper);
! 4690: }
! 4691: else
! 4692: {
! 4693: concat_name =
! 4694: XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
! 4695: memcpy (concat_name, p, p_len);
! 4696: concat_name[p_len] = '/';
! 4697: strcpy (concat_name + p_len + 1, wrapper);
! 4698: }
! 4699: if (check_executable (concat_name))
! 4700: return concat_name;
! 4701: XFREE (concat_name);
! 4702: }
! 4703: }
! 4704: /* not found in PATH; assume curdir */
! 4705: }
! 4706: /* Relative path | not found in path: prepend cwd */
! 4707: if (getcwd (tmp, LT_PATHMAX) == NULL)
! 4708: lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
! 4709: nonnull (strerror (errno)));
! 4710: tmp_len = strlen (tmp);
! 4711: concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
! 4712: memcpy (concat_name, tmp, tmp_len);
! 4713: concat_name[tmp_len] = '/';
! 4714: strcpy (concat_name + tmp_len + 1, wrapper);
! 4715:
! 4716: if (check_executable (concat_name))
! 4717: return concat_name;
! 4718: XFREE (concat_name);
! 4719: return NULL;
! 4720: }
! 4721:
! 4722: char *
! 4723: chase_symlinks (const char *pathspec)
! 4724: {
! 4725: #ifndef S_ISLNK
! 4726: return xstrdup (pathspec);
! 4727: #else
! 4728: char buf[LT_PATHMAX];
! 4729: struct stat s;
! 4730: char *tmp_pathspec = xstrdup (pathspec);
! 4731: char *p;
! 4732: int has_symlinks = 0;
! 4733: while (strlen (tmp_pathspec) && !has_symlinks)
! 4734: {
! 4735: lt_debugprintf (__FILE__, __LINE__,
! 4736: "checking path component for symlinks: %s\n",
! 4737: tmp_pathspec);
! 4738: if (lstat (tmp_pathspec, &s) == 0)
! 4739: {
! 4740: if (S_ISLNK (s.st_mode) != 0)
! 4741: {
! 4742: has_symlinks = 1;
! 4743: break;
! 4744: }
! 4745:
! 4746: /* search backwards for last DIR_SEPARATOR */
! 4747: p = tmp_pathspec + strlen (tmp_pathspec) - 1;
! 4748: while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
! 4749: p--;
! 4750: if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
! 4751: {
! 4752: /* no more DIR_SEPARATORS left */
! 4753: break;
! 4754: }
! 4755: *p = '\0';
! 4756: }
! 4757: else
! 4758: {
! 4759: lt_fatal (__FILE__, __LINE__,
! 4760: "error accessing file \"%s\": %s",
! 4761: tmp_pathspec, nonnull (strerror (errno)));
! 4762: }
! 4763: }
! 4764: XFREE (tmp_pathspec);
! 4765:
! 4766: if (!has_symlinks)
! 4767: {
! 4768: return xstrdup (pathspec);
! 4769: }
! 4770:
! 4771: tmp_pathspec = realpath (pathspec, buf);
! 4772: if (tmp_pathspec == 0)
! 4773: {
! 4774: lt_fatal (__FILE__, __LINE__,
! 4775: "could not follow symlinks for %s", pathspec);
! 4776: }
! 4777: return xstrdup (tmp_pathspec);
! 4778: #endif
! 4779: }
! 4780:
! 4781: char *
! 4782: strendzap (char *str, const char *pat)
! 4783: {
! 4784: size_t len, patlen;
! 4785:
! 4786: assert (str != NULL);
! 4787: assert (pat != NULL);
! 4788:
! 4789: len = strlen (str);
! 4790: patlen = strlen (pat);
! 4791:
! 4792: if (patlen <= len)
! 4793: {
! 4794: str += len - patlen;
! 4795: if (strcmp (str, pat) == 0)
! 4796: *str = '\0';
! 4797: }
! 4798: return str;
! 4799: }
! 4800:
! 4801: void
! 4802: lt_debugprintf (const char *file, int line, const char *fmt, ...)
! 4803: {
! 4804: va_list args;
! 4805: if (lt_debug)
! 4806: {
! 4807: (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
! 4808: va_start (args, fmt);
! 4809: (void) vfprintf (stderr, fmt, args);
! 4810: va_end (args);
! 4811: }
! 4812: }
! 4813:
! 4814: static void
! 4815: lt_error_core (int exit_status, const char *file,
! 4816: int line, const char *mode,
! 4817: const char *message, va_list ap)
! 4818: {
! 4819: fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
! 4820: vfprintf (stderr, message, ap);
! 4821: fprintf (stderr, ".\n");
! 4822:
! 4823: if (exit_status >= 0)
! 4824: exit (exit_status);
! 4825: }
! 4826:
! 4827: void
! 4828: lt_fatal (const char *file, int line, const char *message, ...)
! 4829: {
! 4830: va_list ap;
! 4831: va_start (ap, message);
! 4832: lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
! 4833: va_end (ap);
! 4834: }
! 4835:
! 4836: static const char *
! 4837: nonnull (const char *s)
! 4838: {
! 4839: return s ? s : "(null)";
! 4840: }
! 4841:
! 4842: static const char *
! 4843: nonempty (const char *s)
! 4844: {
! 4845: return (s && !*s) ? "(empty)" : nonnull (s);
! 4846: }
! 4847:
! 4848: void
! 4849: lt_setenv (const char *name, const char *value)
! 4850: {
! 4851: lt_debugprintf (__FILE__, __LINE__,
! 4852: "(lt_setenv) setting '%s' to '%s'\n",
! 4853: nonnull (name), nonnull (value));
! 4854: {
! 4855: #ifdef HAVE_SETENV
! 4856: /* always make a copy, for consistency with !HAVE_SETENV */
! 4857: char *str = xstrdup (value);
! 4858: setenv (name, str, 1);
! 4859: #else
! 4860: int len = strlen (name) + 1 + strlen (value) + 1;
! 4861: char *str = XMALLOC (char, len);
! 4862: sprintf (str, "%s=%s", name, value);
! 4863: if (putenv (str) != EXIT_SUCCESS)
! 4864: {
! 4865: XFREE (str);
! 4866: }
! 4867: #endif
! 4868: }
! 4869: }
! 4870:
! 4871: char *
! 4872: lt_extend_str (const char *orig_value, const char *add, int to_end)
! 4873: {
! 4874: char *new_value;
! 4875: if (orig_value && *orig_value)
! 4876: {
! 4877: int orig_value_len = strlen (orig_value);
! 4878: int add_len = strlen (add);
! 4879: new_value = XMALLOC (char, add_len + orig_value_len + 1);
! 4880: if (to_end)
! 4881: {
! 4882: strcpy (new_value, orig_value);
! 4883: strcpy (new_value + orig_value_len, add);
! 4884: }
! 4885: else
! 4886: {
! 4887: strcpy (new_value, add);
! 4888: strcpy (new_value + add_len, orig_value);
! 4889: }
! 4890: }
! 4891: else
! 4892: {
! 4893: new_value = xstrdup (add);
! 4894: }
! 4895: return new_value;
! 4896: }
! 4897:
! 4898: void
! 4899: lt_update_exe_path (const char *name, const char *value)
! 4900: {
! 4901: lt_debugprintf (__FILE__, __LINE__,
! 4902: "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
! 4903: nonnull (name), nonnull (value));
! 4904:
! 4905: if (name && *name && value && *value)
! 4906: {
! 4907: char *new_value = lt_extend_str (getenv (name), value, 0);
! 4908: /* some systems can't cope with a ':'-terminated path #' */
! 4909: int len = strlen (new_value);
! 4910: while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
! 4911: {
! 4912: new_value[len-1] = '\0';
! 4913: }
! 4914: lt_setenv (name, new_value);
! 4915: XFREE (new_value);
! 4916: }
! 4917: }
! 4918:
! 4919: void
! 4920: lt_update_lib_path (const char *name, const char *value)
! 4921: {
! 4922: lt_debugprintf (__FILE__, __LINE__,
! 4923: "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
! 4924: nonnull (name), nonnull (value));
! 4925:
! 4926: if (name && *name && value && *value)
! 4927: {
! 4928: char *new_value = lt_extend_str (getenv (name), value, 0);
! 4929: lt_setenv (name, new_value);
! 4930: XFREE (new_value);
! 4931: }
! 4932: }
! 4933:
! 4934: EOF
! 4935: case $host_os in
! 4936: mingw*)
! 4937: cat <<"EOF"
! 4938:
! 4939: /* Prepares an argument vector before calling spawn().
! 4940: Note that spawn() does not by itself call the command interpreter
! 4941: (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
! 4942: ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
! 4943: GetVersionEx(&v);
! 4944: v.dwPlatformId == VER_PLATFORM_WIN32_NT;
! 4945: }) ? "cmd.exe" : "command.com").
! 4946: Instead it simply concatenates the arguments, separated by ' ', and calls
! 4947: CreateProcess(). We must quote the arguments since Win32 CreateProcess()
! 4948: interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
! 4949: special way:
! 4950: - Space and tab are interpreted as delimiters. They are not treated as
! 4951: delimiters if they are surrounded by double quotes: "...".
! 4952: - Unescaped double quotes are removed from the input. Their only effect is
! 4953: that within double quotes, space and tab are treated like normal
! 4954: characters.
! 4955: - Backslashes not followed by double quotes are not special.
! 4956: - But 2*n+1 backslashes followed by a double quote become
! 4957: n backslashes followed by a double quote (n >= 0):
! 4958: \" -> "
! 4959: \\\" -> \"
! 4960: \\\\\" -> \\"
! 4961: */
! 4962: #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
! 4963: #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
! 4964: char **
! 4965: prepare_spawn (char **argv)
! 4966: {
! 4967: size_t argc;
! 4968: char **new_argv;
! 4969: size_t i;
! 4970:
! 4971: /* Count number of arguments. */
! 4972: for (argc = 0; argv[argc] != NULL; argc++)
! 4973: ;
! 4974:
! 4975: /* Allocate new argument vector. */
! 4976: new_argv = XMALLOC (char *, argc + 1);
! 4977:
! 4978: /* Put quoted arguments into the new argument vector. */
! 4979: for (i = 0; i < argc; i++)
! 4980: {
! 4981: const char *string = argv[i];
! 4982:
! 4983: if (string[0] == '\0')
! 4984: new_argv[i] = xstrdup ("\"\"");
! 4985: else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
! 4986: {
! 4987: int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
! 4988: size_t length;
! 4989: unsigned int backslashes;
! 4990: const char *s;
! 4991: char *quoted_string;
! 4992: char *p;
! 4993:
! 4994: length = 0;
! 4995: backslashes = 0;
! 4996: if (quote_around)
! 4997: length++;
! 4998: for (s = string; *s != '\0'; s++)
! 4999: {
! 5000: char c = *s;
! 5001: if (c == '"')
! 5002: length += backslashes + 1;
! 5003: length++;
! 5004: if (c == '\\')
! 5005: backslashes++;
! 5006: else
! 5007: backslashes = 0;
! 5008: }
! 5009: if (quote_around)
! 5010: length += backslashes + 1;
! 5011:
! 5012: quoted_string = XMALLOC (char, length + 1);
! 5013:
! 5014: p = quoted_string;
! 5015: backslashes = 0;
! 5016: if (quote_around)
! 5017: *p++ = '"';
! 5018: for (s = string; *s != '\0'; s++)
! 5019: {
! 5020: char c = *s;
! 5021: if (c == '"')
! 5022: {
! 5023: unsigned int j;
! 5024: for (j = backslashes + 1; j > 0; j--)
! 5025: *p++ = '\\';
! 5026: }
! 5027: *p++ = c;
! 5028: if (c == '\\')
! 5029: backslashes++;
! 5030: else
! 5031: backslashes = 0;
! 5032: }
! 5033: if (quote_around)
! 5034: {
! 5035: unsigned int j;
! 5036: for (j = backslashes; j > 0; j--)
! 5037: *p++ = '\\';
! 5038: *p++ = '"';
! 5039: }
! 5040: *p = '\0';
! 5041:
! 5042: new_argv[i] = quoted_string;
! 5043: }
! 5044: else
! 5045: new_argv[i] = (char *) string;
! 5046: }
! 5047: new_argv[argc] = NULL;
! 5048:
! 5049: return new_argv;
! 5050: }
! 5051: EOF
! 5052: ;;
! 5053: esac
! 5054:
! 5055: cat <<"EOF"
! 5056: void lt_dump_script (FILE* f)
! 5057: {
! 5058: EOF
! 5059: func_emit_wrapper yes |
! 5060: $SED -e 's/\([\\"]\)/\\\1/g' \
! 5061: -e 's/^/ fputs ("/' -e 's/$/\\n", f);/'
! 5062:
! 5063: cat <<"EOF"
! 5064: }
! 5065: EOF
! 5066: }
! 5067: # end: func_emit_cwrapperexe_src
! 5068:
! 5069: # func_win32_import_lib_p ARG
! 5070: # True if ARG is an import lib, as indicated by $file_magic_cmd
! 5071: func_win32_import_lib_p ()
! 5072: {
! 5073: $opt_debug
! 5074: case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
! 5075: *import*) : ;;
! 5076: *) false ;;
! 5077: esac
! 5078: }
! 5079:
! 5080: # func_mode_link arg...
! 5081: func_mode_link ()
! 5082: {
! 5083: $opt_debug
! 5084: case $host in
! 5085: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
! 5086: # It is impossible to link a dll without this setting, and
! 5087: # we shouldn't force the makefile maintainer to figure out
! 5088: # which system we are compiling for in order to pass an extra
! 5089: # flag for every libtool invocation.
! 5090: # allow_undefined=no
! 5091:
! 5092: # FIXME: Unfortunately, there are problems with the above when trying
! 5093: # to make a dll which has undefined symbols, in which case not
! 5094: # even a static library is built. For now, we need to specify
! 5095: # -no-undefined on the libtool link line when we can be certain
! 5096: # that all symbols are satisfied, otherwise we get a static library.
! 5097: allow_undefined=yes
! 5098: ;;
! 5099: *)
! 5100: allow_undefined=yes
! 5101: ;;
! 5102: esac
! 5103: libtool_args=$nonopt
! 5104: base_compile="$nonopt $@"
! 5105: compile_command=$nonopt
! 5106: finalize_command=$nonopt
! 5107:
! 5108: compile_rpath=
! 5109: finalize_rpath=
! 5110: compile_shlibpath=
! 5111: finalize_shlibpath=
! 5112: convenience=
! 5113: old_convenience=
! 5114: deplibs=
! 5115: old_deplibs=
! 5116: compiler_flags=
! 5117: linker_flags=
! 5118: dllsearchpath=
! 5119: lib_search_path=`pwd`
! 5120: inst_prefix_dir=
! 5121: new_inherited_linker_flags=
! 5122:
! 5123: avoid_version=no
! 5124: bindir=
! 5125: dlfiles=
! 5126: dlprefiles=
! 5127: dlself=no
! 5128: export_dynamic=no
! 5129: export_symbols=
! 5130: export_symbols_regex=
! 5131: generated=
! 5132: libobjs=
! 5133: ltlibs=
! 5134: module=no
! 5135: no_install=no
! 5136: objs=
! 5137: non_pic_objects=
! 5138: precious_files_regex=
! 5139: prefer_static_libs=no
! 5140: preload=no
! 5141: prev=
! 5142: prevarg=
! 5143: release=
! 5144: rpath=
! 5145: xrpath=
! 5146: perm_rpath=
! 5147: temp_rpath=
! 5148: thread_safe=no
! 5149: vinfo=
! 5150: vinfo_number=no
! 5151: weak_libs=
! 5152: single_module="${wl}-single_module"
! 5153: func_infer_tag $base_compile
! 5154:
! 5155: # We need to know -static, to get the right output filenames.
! 5156: for arg
! 5157: do
! 5158: case $arg in
! 5159: -shared)
! 5160: test "$build_libtool_libs" != yes && \
! 5161: func_fatal_configuration "can not build a shared library"
! 5162: build_old_libs=no
! 5163: break
! 5164: ;;
! 5165: -all-static | -static | -static-libtool-libs)
! 5166: case $arg in
! 5167: -all-static)
! 5168: if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
! 5169: func_warning "complete static linking is impossible in this configuration"
! 5170: fi
! 5171: if test -n "$link_static_flag"; then
! 5172: dlopen_self=$dlopen_self_static
! 5173: fi
! 5174: prefer_static_libs=yes
! 5175: ;;
! 5176: -static)
! 5177: if test -z "$pic_flag" && test -n "$link_static_flag"; then
! 5178: dlopen_self=$dlopen_self_static
! 5179: fi
! 5180: prefer_static_libs=built
! 5181: ;;
! 5182: -static-libtool-libs)
! 5183: if test -z "$pic_flag" && test -n "$link_static_flag"; then
! 5184: dlopen_self=$dlopen_self_static
! 5185: fi
! 5186: prefer_static_libs=yes
! 5187: ;;
! 5188: esac
! 5189: build_libtool_libs=no
! 5190: build_old_libs=yes
! 5191: break
! 5192: ;;
! 5193: esac
! 5194: done
! 5195:
! 5196: # See if our shared archives depend on static archives.
! 5197: test -n "$old_archive_from_new_cmds" && build_old_libs=yes
! 5198:
! 5199: # Go through the arguments, transforming them on the way.
! 5200: while test "$#" -gt 0; do
! 5201: arg="$1"
! 5202: shift
! 5203: func_quote_for_eval "$arg"
! 5204: qarg=$func_quote_for_eval_unquoted_result
! 5205: func_append libtool_args " $func_quote_for_eval_result"
! 5206:
! 5207: # If the previous option needs an argument, assign it.
! 5208: if test -n "$prev"; then
! 5209: case $prev in
! 5210: output)
! 5211: func_append compile_command " @OUTPUT@"
! 5212: func_append finalize_command " @OUTPUT@"
! 5213: ;;
! 5214: esac
! 5215:
! 5216: case $prev in
! 5217: bindir)
! 5218: bindir="$arg"
! 5219: prev=
! 5220: continue
! 5221: ;;
! 5222: dlfiles|dlprefiles)
! 5223: if test "$preload" = no; then
! 5224: # Add the symbol object into the linking commands.
! 5225: func_append compile_command " @SYMFILE@"
! 5226: func_append finalize_command " @SYMFILE@"
! 5227: preload=yes
! 5228: fi
! 5229: case $arg in
! 5230: *.la | *.lo) ;; # We handle these cases below.
! 5231: force)
! 5232: if test "$dlself" = no; then
! 5233: dlself=needless
! 5234: export_dynamic=yes
! 5235: fi
! 5236: prev=
! 5237: continue
! 5238: ;;
! 5239: self)
! 5240: if test "$prev" = dlprefiles; then
! 5241: dlself=yes
! 5242: elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
! 5243: dlself=yes
! 5244: else
! 5245: dlself=needless
! 5246: export_dynamic=yes
! 5247: fi
! 5248: prev=
! 5249: continue
! 5250: ;;
! 5251: *)
! 5252: if test "$prev" = dlfiles; then
! 5253: func_append dlfiles " $arg"
! 5254: else
! 5255: func_append dlprefiles " $arg"
! 5256: fi
! 5257: prev=
! 5258: continue
! 5259: ;;
! 5260: esac
! 5261: ;;
! 5262: expsyms)
! 5263: export_symbols="$arg"
! 5264: test -f "$arg" \
! 5265: || func_fatal_error "symbol file \`$arg' does not exist"
! 5266: prev=
! 5267: continue
! 5268: ;;
! 5269: expsyms_regex)
! 5270: export_symbols_regex="$arg"
! 5271: prev=
! 5272: continue
! 5273: ;;
! 5274: framework)
! 5275: case $host in
! 5276: *-*-darwin*)
! 5277: case "$deplibs " in
! 5278: *" $qarg.ltframework "*) ;;
! 5279: *) func_append deplibs " $qarg.ltframework" # this is fixed later
! 5280: ;;
! 5281: esac
! 5282: ;;
! 5283: esac
! 5284: prev=
! 5285: continue
! 5286: ;;
! 5287: inst_prefix)
! 5288: inst_prefix_dir="$arg"
! 5289: prev=
! 5290: continue
! 5291: ;;
! 5292: objectlist)
! 5293: if test -f "$arg"; then
! 5294: save_arg=$arg
! 5295: moreargs=
! 5296: for fil in `cat "$save_arg"`
! 5297: do
! 5298: # func_append moreargs " $fil"
! 5299: arg=$fil
! 5300: # A libtool-controlled object.
! 5301:
! 5302: # Check to see that this really is a libtool object.
! 5303: if func_lalib_unsafe_p "$arg"; then
! 5304: pic_object=
! 5305: non_pic_object=
! 5306:
! 5307: # Read the .lo file
! 5308: func_source "$arg"
! 5309:
! 5310: if test -z "$pic_object" ||
! 5311: test -z "$non_pic_object" ||
! 5312: test "$pic_object" = none &&
! 5313: test "$non_pic_object" = none; then
! 5314: func_fatal_error "cannot find name of object for \`$arg'"
! 5315: fi
! 5316:
! 5317: # Extract subdirectory from the argument.
! 5318: func_dirname "$arg" "/" ""
! 5319: xdir="$func_dirname_result"
! 5320:
! 5321: if test "$pic_object" != none; then
! 5322: # Prepend the subdirectory the object is found in.
! 5323: pic_object="$xdir$pic_object"
! 5324:
! 5325: if test "$prev" = dlfiles; then
! 5326: if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
! 5327: func_append dlfiles " $pic_object"
! 5328: prev=
! 5329: continue
! 5330: else
! 5331: # If libtool objects are unsupported, then we need to preload.
! 5332: prev=dlprefiles
! 5333: fi
! 5334: fi
! 5335:
! 5336: # CHECK ME: I think I busted this. -Ossama
! 5337: if test "$prev" = dlprefiles; then
! 5338: # Preload the old-style object.
! 5339: func_append dlprefiles " $pic_object"
! 5340: prev=
! 5341: fi
! 5342:
! 5343: # A PIC object.
! 5344: func_append libobjs " $pic_object"
! 5345: arg="$pic_object"
! 5346: fi
! 5347:
! 5348: # Non-PIC object.
! 5349: if test "$non_pic_object" != none; then
! 5350: # Prepend the subdirectory the object is found in.
! 5351: non_pic_object="$xdir$non_pic_object"
! 5352:
! 5353: # A standard non-PIC object
! 5354: func_append non_pic_objects " $non_pic_object"
! 5355: if test -z "$pic_object" || test "$pic_object" = none ; then
! 5356: arg="$non_pic_object"
! 5357: fi
! 5358: else
! 5359: # If the PIC object exists, use it instead.
! 5360: # $xdir was prepended to $pic_object above.
! 5361: non_pic_object="$pic_object"
! 5362: func_append non_pic_objects " $non_pic_object"
! 5363: fi
! 5364: else
! 5365: # Only an error if not doing a dry-run.
! 5366: if $opt_dry_run; then
! 5367: # Extract subdirectory from the argument.
! 5368: func_dirname "$arg" "/" ""
! 5369: xdir="$func_dirname_result"
! 5370:
! 5371: func_lo2o "$arg"
! 5372: pic_object=$xdir$objdir/$func_lo2o_result
! 5373: non_pic_object=$xdir$func_lo2o_result
! 5374: func_append libobjs " $pic_object"
! 5375: func_append non_pic_objects " $non_pic_object"
! 5376: else
! 5377: func_fatal_error "\`$arg' is not a valid libtool object"
! 5378: fi
! 5379: fi
! 5380: done
! 5381: else
! 5382: func_fatal_error "link input file \`$arg' does not exist"
! 5383: fi
! 5384: arg=$save_arg
! 5385: prev=
! 5386: continue
! 5387: ;;
! 5388: precious_regex)
! 5389: precious_files_regex="$arg"
! 5390: prev=
! 5391: continue
! 5392: ;;
! 5393: release)
! 5394: release="-$arg"
! 5395: prev=
! 5396: continue
! 5397: ;;
! 5398: rpath | xrpath)
! 5399: # We need an absolute path.
! 5400: case $arg in
! 5401: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 5402: *)
! 5403: func_fatal_error "only absolute run-paths are allowed"
! 5404: ;;
! 5405: esac
! 5406: if test "$prev" = rpath; then
! 5407: case "$rpath " in
! 5408: *" $arg "*) ;;
! 5409: *) func_append rpath " $arg" ;;
! 5410: esac
! 5411: else
! 5412: case "$xrpath " in
! 5413: *" $arg "*) ;;
! 5414: *) func_append xrpath " $arg" ;;
! 5415: esac
! 5416: fi
! 5417: prev=
! 5418: continue
! 5419: ;;
! 5420: shrext)
! 5421: shrext_cmds="$arg"
! 5422: prev=
! 5423: continue
! 5424: ;;
! 5425: weak)
! 5426: func_append weak_libs " $arg"
! 5427: prev=
! 5428: continue
! 5429: ;;
! 5430: xcclinker)
! 5431: func_append linker_flags " $qarg"
! 5432: func_append compiler_flags " $qarg"
! 5433: prev=
! 5434: func_append compile_command " $qarg"
! 5435: func_append finalize_command " $qarg"
! 5436: continue
! 5437: ;;
! 5438: xcompiler)
! 5439: func_append compiler_flags " $qarg"
! 5440: prev=
! 5441: func_append compile_command " $qarg"
! 5442: func_append finalize_command " $qarg"
! 5443: continue
! 5444: ;;
! 5445: xlinker)
! 5446: func_append linker_flags " $qarg"
! 5447: func_append compiler_flags " $wl$qarg"
! 5448: prev=
! 5449: func_append compile_command " $wl$qarg"
! 5450: func_append finalize_command " $wl$qarg"
! 5451: continue
! 5452: ;;
! 5453: *)
! 5454: eval "$prev=\"\$arg\""
! 5455: prev=
! 5456: continue
! 5457: ;;
! 5458: esac
! 5459: fi # test -n "$prev"
! 5460:
! 5461: prevarg="$arg"
! 5462:
! 5463: case $arg in
! 5464: -all-static)
! 5465: if test -n "$link_static_flag"; then
! 5466: # See comment for -static flag below, for more details.
! 5467: func_append compile_command " $link_static_flag"
! 5468: func_append finalize_command " $link_static_flag"
! 5469: fi
! 5470: continue
! 5471: ;;
! 5472:
! 5473: -allow-undefined)
! 5474: # FIXME: remove this flag sometime in the future.
! 5475: func_fatal_error "\`-allow-undefined' must not be used because it is the default"
! 5476: ;;
! 5477:
! 5478: -avoid-version)
! 5479: avoid_version=yes
! 5480: continue
! 5481: ;;
! 5482:
! 5483: -bindir)
! 5484: prev=bindir
! 5485: continue
! 5486: ;;
! 5487:
! 5488: -dlopen)
! 5489: prev=dlfiles
! 5490: continue
! 5491: ;;
! 5492:
! 5493: -dlpreopen)
! 5494: prev=dlprefiles
! 5495: continue
! 5496: ;;
! 5497:
! 5498: -export-dynamic)
! 5499: export_dynamic=yes
! 5500: continue
! 5501: ;;
! 5502:
! 5503: -export-symbols | -export-symbols-regex)
! 5504: if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
! 5505: func_fatal_error "more than one -exported-symbols argument is not allowed"
! 5506: fi
! 5507: if test "X$arg" = "X-export-symbols"; then
! 5508: prev=expsyms
! 5509: else
! 5510: prev=expsyms_regex
! 5511: fi
! 5512: continue
! 5513: ;;
! 5514:
! 5515: -framework)
! 5516: prev=framework
! 5517: continue
! 5518: ;;
! 5519:
! 5520: -inst-prefix-dir)
! 5521: prev=inst_prefix
! 5522: continue
! 5523: ;;
! 5524:
! 5525: # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
! 5526: # so, if we see these flags be careful not to treat them like -L
! 5527: -L[A-Z][A-Z]*:*)
! 5528: case $with_gcc/$host in
! 5529: no/*-*-irix* | /*-*-irix*)
! 5530: func_append compile_command " $arg"
! 5531: func_append finalize_command " $arg"
! 5532: ;;
! 5533: esac
! 5534: continue
! 5535: ;;
! 5536:
! 5537: -L*)
! 5538: func_stripname "-L" '' "$arg"
! 5539: if test -z "$func_stripname_result"; then
! 5540: if test "$#" -gt 0; then
! 5541: func_fatal_error "require no space between \`-L' and \`$1'"
! 5542: else
! 5543: func_fatal_error "need path for \`-L' option"
! 5544: fi
! 5545: fi
! 5546: func_resolve_sysroot "$func_stripname_result"
! 5547: dir=$func_resolve_sysroot_result
! 5548: # We need an absolute path.
! 5549: case $dir in
! 5550: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 5551: *)
! 5552: absdir=`cd "$dir" && pwd`
! 5553: test -z "$absdir" && \
! 5554: func_fatal_error "cannot determine absolute directory name of \`$dir'"
! 5555: dir="$absdir"
! 5556: ;;
! 5557: esac
! 5558: case "$deplibs " in
! 5559: *" -L$dir "* | *" $arg "*)
! 5560: # Will only happen for absolute or sysroot arguments
! 5561: ;;
! 5562: *)
! 5563: # Preserve sysroot, but never include relative directories
! 5564: case $dir in
! 5565: [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
! 5566: *) func_append deplibs " -L$dir" ;;
! 5567: esac
! 5568: func_append lib_search_path " $dir"
! 5569: ;;
! 5570: esac
! 5571: case $host in
! 5572: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
! 5573: testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
! 5574: case :$dllsearchpath: in
! 5575: *":$dir:"*) ;;
! 5576: ::) dllsearchpath=$dir;;
! 5577: *) func_append dllsearchpath ":$dir";;
! 5578: esac
! 5579: case :$dllsearchpath: in
! 5580: *":$testbindir:"*) ;;
! 5581: ::) dllsearchpath=$testbindir;;
! 5582: *) func_append dllsearchpath ":$testbindir";;
! 5583: esac
! 5584: ;;
! 5585: esac
! 5586: continue
! 5587: ;;
! 5588:
! 5589: -l*)
! 5590: if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
! 5591: case $host in
! 5592: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
! 5593: # These systems don't actually have a C or math library (as such)
! 5594: continue
! 5595: ;;
! 5596: *-*-os2*)
! 5597: # These systems don't actually have a C library (as such)
! 5598: test "X$arg" = "X-lc" && continue
! 5599: ;;
! 5600: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 5601: # Do not include libc due to us having libc/libc_r.
! 5602: test "X$arg" = "X-lc" && continue
! 5603: ;;
! 5604: *-*-rhapsody* | *-*-darwin1.[012])
! 5605: # Rhapsody C and math libraries are in the System framework
! 5606: func_append deplibs " System.ltframework"
! 5607: continue
! 5608: ;;
! 5609: *-*-sco3.2v5* | *-*-sco5v6*)
! 5610: # Causes problems with __ctype
! 5611: test "X$arg" = "X-lc" && continue
! 5612: ;;
! 5613: *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
! 5614: # Compiler inserts libc in the correct place for threads to work
! 5615: test "X$arg" = "X-lc" && continue
! 5616: ;;
! 5617: esac
! 5618: elif test "X$arg" = "X-lc_r"; then
! 5619: case $host in
! 5620: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 5621: # Do not include libc_r directly, use -pthread flag.
! 5622: continue
! 5623: ;;
! 5624: esac
! 5625: fi
! 5626: func_append deplibs " $arg"
! 5627: continue
! 5628: ;;
! 5629:
! 5630: -module)
! 5631: module=yes
! 5632: continue
! 5633: ;;
! 5634:
! 5635: # Tru64 UNIX uses -model [arg] to determine the layout of C++
! 5636: # classes, name mangling, and exception handling.
! 5637: # Darwin uses the -arch flag to determine output architecture.
! 5638: -model|-arch|-isysroot|--sysroot)
! 5639: func_append compiler_flags " $arg"
! 5640: func_append compile_command " $arg"
! 5641: func_append finalize_command " $arg"
! 5642: prev=xcompiler
! 5643: continue
! 5644: ;;
! 5645:
! 5646: -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
! 5647: func_append compiler_flags " $arg"
! 5648: func_append compile_command " $arg"
! 5649: func_append finalize_command " $arg"
! 5650: case "$new_inherited_linker_flags " in
! 5651: *" $arg "*) ;;
! 5652: * ) func_append new_inherited_linker_flags " $arg" ;;
! 5653: esac
! 5654: continue
! 5655: ;;
! 5656:
! 5657: -multi_module)
! 5658: single_module="${wl}-multi_module"
! 5659: continue
! 5660: ;;
! 5661:
! 5662: -no-fast-install)
! 5663: fast_install=no
! 5664: continue
! 5665: ;;
! 5666:
! 5667: -no-install)
! 5668: case $host in
! 5669: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
! 5670: # The PATH hackery in wrapper scripts is required on Windows
! 5671: # and Darwin in order for the loader to find any dlls it needs.
! 5672: func_warning "\`-no-install' is ignored for $host"
! 5673: func_warning "assuming \`-no-fast-install' instead"
! 5674: fast_install=no
! 5675: ;;
! 5676: *) no_install=yes ;;
! 5677: esac
! 5678: continue
! 5679: ;;
! 5680:
! 5681: -no-undefined)
! 5682: allow_undefined=no
! 5683: continue
! 5684: ;;
! 5685:
! 5686: -objectlist)
! 5687: prev=objectlist
! 5688: continue
! 5689: ;;
! 5690:
! 5691: -o) prev=output ;;
! 5692:
! 5693: -precious-files-regex)
! 5694: prev=precious_regex
! 5695: continue
! 5696: ;;
! 5697:
! 5698: -release)
! 5699: prev=release
! 5700: continue
! 5701: ;;
! 5702:
! 5703: -rpath)
! 5704: prev=rpath
! 5705: continue
! 5706: ;;
! 5707:
! 5708: -R)
! 5709: prev=xrpath
! 5710: continue
! 5711: ;;
! 5712:
! 5713: -R*)
! 5714: func_stripname '-R' '' "$arg"
! 5715: dir=$func_stripname_result
! 5716: # We need an absolute path.
! 5717: case $dir in
! 5718: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 5719: =*)
! 5720: func_stripname '=' '' "$dir"
! 5721: dir=$lt_sysroot$func_stripname_result
! 5722: ;;
! 5723: *)
! 5724: func_fatal_error "only absolute run-paths are allowed"
! 5725: ;;
! 5726: esac
! 5727: case "$xrpath " in
! 5728: *" $dir "*) ;;
! 5729: *) func_append xrpath " $dir" ;;
! 5730: esac
! 5731: continue
! 5732: ;;
! 5733:
! 5734: -shared)
! 5735: # The effects of -shared are defined in a previous loop.
! 5736: continue
! 5737: ;;
! 5738:
! 5739: -shrext)
! 5740: prev=shrext
! 5741: continue
! 5742: ;;
! 5743:
! 5744: -static | -static-libtool-libs)
! 5745: # The effects of -static are defined in a previous loop.
! 5746: # We used to do the same as -all-static on platforms that
! 5747: # didn't have a PIC flag, but the assumption that the effects
! 5748: # would be equivalent was wrong. It would break on at least
! 5749: # Digital Unix and AIX.
! 5750: continue
! 5751: ;;
! 5752:
! 5753: -thread-safe)
! 5754: thread_safe=yes
! 5755: continue
! 5756: ;;
! 5757:
! 5758: -version-info)
! 5759: prev=vinfo
! 5760: continue
! 5761: ;;
! 5762:
! 5763: -version-number)
! 5764: prev=vinfo
! 5765: vinfo_number=yes
! 5766: continue
! 5767: ;;
! 5768:
! 5769: -weak)
! 5770: prev=weak
! 5771: continue
! 5772: ;;
! 5773:
! 5774: -Wc,*)
! 5775: func_stripname '-Wc,' '' "$arg"
! 5776: args=$func_stripname_result
! 5777: arg=
! 5778: save_ifs="$IFS"; IFS=','
! 5779: for flag in $args; do
! 5780: IFS="$save_ifs"
! 5781: func_quote_for_eval "$flag"
! 5782: func_append arg " $func_quote_for_eval_result"
! 5783: func_append compiler_flags " $func_quote_for_eval_result"
! 5784: done
! 5785: IFS="$save_ifs"
! 5786: func_stripname ' ' '' "$arg"
! 5787: arg=$func_stripname_result
! 5788: ;;
! 5789:
! 5790: -Wl,*)
! 5791: func_stripname '-Wl,' '' "$arg"
! 5792: args=$func_stripname_result
! 5793: arg=
! 5794: save_ifs="$IFS"; IFS=','
! 5795: for flag in $args; do
! 5796: IFS="$save_ifs"
! 5797: func_quote_for_eval "$flag"
! 5798: func_append arg " $wl$func_quote_for_eval_result"
! 5799: func_append compiler_flags " $wl$func_quote_for_eval_result"
! 5800: func_append linker_flags " $func_quote_for_eval_result"
! 5801: done
! 5802: IFS="$save_ifs"
! 5803: func_stripname ' ' '' "$arg"
! 5804: arg=$func_stripname_result
! 5805: ;;
! 5806:
! 5807: -Xcompiler)
! 5808: prev=xcompiler
! 5809: continue
! 5810: ;;
! 5811:
! 5812: -Xlinker)
! 5813: prev=xlinker
! 5814: continue
! 5815: ;;
! 5816:
! 5817: -XCClinker)
! 5818: prev=xcclinker
! 5819: continue
! 5820: ;;
! 5821:
! 5822: # -msg_* for osf cc
! 5823: -msg_*)
! 5824: func_quote_for_eval "$arg"
! 5825: arg="$func_quote_for_eval_result"
! 5826: ;;
! 5827:
! 5828: # Flags to be passed through unchanged, with rationale:
! 5829: # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
! 5830: # -r[0-9][0-9]* specify processor for the SGI compiler
! 5831: # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
! 5832: # +DA*, +DD* enable 64-bit mode for the HP compiler
! 5833: # -q* compiler args for the IBM compiler
! 5834: # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
! 5835: # -F/path path to uninstalled frameworks, gcc on darwin
! 5836: # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
! 5837: # @file GCC response files
! 5838: # -tp=* Portland pgcc target processor selection
! 5839: # --sysroot=* for sysroot support
! 5840: # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
! 5841: -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
! 5842: -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
! 5843: -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
! 5844: func_quote_for_eval "$arg"
! 5845: arg="$func_quote_for_eval_result"
! 5846: func_append compile_command " $arg"
! 5847: func_append finalize_command " $arg"
! 5848: func_append compiler_flags " $arg"
! 5849: continue
! 5850: ;;
! 5851:
! 5852: # Some other compiler flag.
! 5853: -* | +*)
! 5854: func_quote_for_eval "$arg"
! 5855: arg="$func_quote_for_eval_result"
! 5856: ;;
! 5857:
! 5858: *.$objext)
! 5859: # A standard object.
! 5860: func_append objs " $arg"
! 5861: ;;
! 5862:
! 5863: *.lo)
! 5864: # A libtool-controlled object.
! 5865:
! 5866: # Check to see that this really is a libtool object.
! 5867: if func_lalib_unsafe_p "$arg"; then
! 5868: pic_object=
! 5869: non_pic_object=
! 5870:
! 5871: # Read the .lo file
! 5872: func_source "$arg"
! 5873:
! 5874: if test -z "$pic_object" ||
! 5875: test -z "$non_pic_object" ||
! 5876: test "$pic_object" = none &&
! 5877: test "$non_pic_object" = none; then
! 5878: func_fatal_error "cannot find name of object for \`$arg'"
! 5879: fi
! 5880:
! 5881: # Extract subdirectory from the argument.
! 5882: func_dirname "$arg" "/" ""
! 5883: xdir="$func_dirname_result"
! 5884:
! 5885: if test "$pic_object" != none; then
! 5886: # Prepend the subdirectory the object is found in.
! 5887: pic_object="$xdir$pic_object"
! 5888:
! 5889: if test "$prev" = dlfiles; then
! 5890: if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
! 5891: func_append dlfiles " $pic_object"
! 5892: prev=
! 5893: continue
! 5894: else
! 5895: # If libtool objects are unsupported, then we need to preload.
! 5896: prev=dlprefiles
! 5897: fi
! 5898: fi
! 5899:
! 5900: # CHECK ME: I think I busted this. -Ossama
! 5901: if test "$prev" = dlprefiles; then
! 5902: # Preload the old-style object.
! 5903: func_append dlprefiles " $pic_object"
! 5904: prev=
! 5905: fi
! 5906:
! 5907: # A PIC object.
! 5908: func_append libobjs " $pic_object"
! 5909: arg="$pic_object"
! 5910: fi
! 5911:
! 5912: # Non-PIC object.
! 5913: if test "$non_pic_object" != none; then
! 5914: # Prepend the subdirectory the object is found in.
! 5915: non_pic_object="$xdir$non_pic_object"
! 5916:
! 5917: # A standard non-PIC object
! 5918: func_append non_pic_objects " $non_pic_object"
! 5919: if test -z "$pic_object" || test "$pic_object" = none ; then
! 5920: arg="$non_pic_object"
! 5921: fi
! 5922: else
! 5923: # If the PIC object exists, use it instead.
! 5924: # $xdir was prepended to $pic_object above.
! 5925: non_pic_object="$pic_object"
! 5926: func_append non_pic_objects " $non_pic_object"
! 5927: fi
! 5928: else
! 5929: # Only an error if not doing a dry-run.
! 5930: if $opt_dry_run; then
! 5931: # Extract subdirectory from the argument.
! 5932: func_dirname "$arg" "/" ""
! 5933: xdir="$func_dirname_result"
! 5934:
! 5935: func_lo2o "$arg"
! 5936: pic_object=$xdir$objdir/$func_lo2o_result
! 5937: non_pic_object=$xdir$func_lo2o_result
! 5938: func_append libobjs " $pic_object"
! 5939: func_append non_pic_objects " $non_pic_object"
! 5940: else
! 5941: func_fatal_error "\`$arg' is not a valid libtool object"
! 5942: fi
! 5943: fi
! 5944: ;;
! 5945:
! 5946: *.$libext)
! 5947: # An archive.
! 5948: func_append deplibs " $arg"
! 5949: func_append old_deplibs " $arg"
! 5950: continue
! 5951: ;;
! 5952:
! 5953: *.la)
! 5954: # A libtool-controlled library.
! 5955:
! 5956: func_resolve_sysroot "$arg"
! 5957: if test "$prev" = dlfiles; then
! 5958: # This library was specified with -dlopen.
! 5959: func_append dlfiles " $func_resolve_sysroot_result"
! 5960: prev=
! 5961: elif test "$prev" = dlprefiles; then
! 5962: # The library was specified with -dlpreopen.
! 5963: func_append dlprefiles " $func_resolve_sysroot_result"
! 5964: prev=
! 5965: else
! 5966: func_append deplibs " $func_resolve_sysroot_result"
! 5967: fi
! 5968: continue
! 5969: ;;
! 5970:
! 5971: # Some other compiler argument.
! 5972: *)
! 5973: # Unknown arguments in both finalize_command and compile_command need
! 5974: # to be aesthetically quoted because they are evaled later.
! 5975: func_quote_for_eval "$arg"
! 5976: arg="$func_quote_for_eval_result"
! 5977: ;;
! 5978: esac # arg
! 5979:
! 5980: # Now actually substitute the argument into the commands.
! 5981: if test -n "$arg"; then
! 5982: func_append compile_command " $arg"
! 5983: func_append finalize_command " $arg"
! 5984: fi
! 5985: done # argument parsing loop
! 5986:
! 5987: test -n "$prev" && \
! 5988: func_fatal_help "the \`$prevarg' option requires an argument"
! 5989:
! 5990: if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
! 5991: eval arg=\"$export_dynamic_flag_spec\"
! 5992: func_append compile_command " $arg"
! 5993: func_append finalize_command " $arg"
! 5994: fi
! 5995:
! 5996: oldlibs=
! 5997: # calculate the name of the file, without its directory
! 5998: func_basename "$output"
! 5999: outputname="$func_basename_result"
! 6000: libobjs_save="$libobjs"
! 6001:
! 6002: if test -n "$shlibpath_var"; then
! 6003: # get the directories listed in $shlibpath_var
! 6004: eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
! 6005: else
! 6006: shlib_search_path=
! 6007: fi
! 6008: eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
! 6009: eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
! 6010:
! 6011: func_dirname "$output" "/" ""
! 6012: output_objdir="$func_dirname_result$objdir"
! 6013: func_to_tool_file "$output_objdir/"
! 6014: tool_output_objdir=$func_to_tool_file_result
! 6015: # Create the object directory.
! 6016: func_mkdir_p "$output_objdir"
! 6017:
! 6018: # Determine the type of output
! 6019: case $output in
! 6020: "")
! 6021: func_fatal_help "you must specify an output file"
! 6022: ;;
! 6023: *.$libext) linkmode=oldlib ;;
! 6024: *.lo | *.$objext) linkmode=obj ;;
! 6025: *.la) linkmode=lib ;;
! 6026: *) linkmode=prog ;; # Anything else should be a program.
! 6027: esac
! 6028:
! 6029: specialdeplibs=
! 6030:
! 6031: libs=
! 6032: # Find all interdependent deplibs by searching for libraries
! 6033: # that are linked more than once (e.g. -la -lb -la)
! 6034: for deplib in $deplibs; do
! 6035: if $opt_preserve_dup_deps ; then
! 6036: case "$libs " in
! 6037: *" $deplib "*) func_append specialdeplibs " $deplib" ;;
! 6038: esac
! 6039: fi
! 6040: func_append libs " $deplib"
! 6041: done
! 6042:
! 6043: if test "$linkmode" = lib; then
! 6044: libs="$predeps $libs $compiler_lib_search_path $postdeps"
! 6045:
! 6046: # Compute libraries that are listed more than once in $predeps
! 6047: # $postdeps and mark them as special (i.e., whose duplicates are
! 6048: # not to be eliminated).
! 6049: pre_post_deps=
! 6050: if $opt_duplicate_compiler_generated_deps; then
! 6051: for pre_post_dep in $predeps $postdeps; do
! 6052: case "$pre_post_deps " in
! 6053: *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
! 6054: esac
! 6055: func_append pre_post_deps " $pre_post_dep"
! 6056: done
! 6057: fi
! 6058: pre_post_deps=
! 6059: fi
! 6060:
! 6061: deplibs=
! 6062: newdependency_libs=
! 6063: newlib_search_path=
! 6064: need_relink=no # whether we're linking any uninstalled libtool libraries
! 6065: notinst_deplibs= # not-installed libtool libraries
! 6066: notinst_path= # paths that contain not-installed libtool libraries
! 6067:
! 6068: case $linkmode in
! 6069: lib)
! 6070: passes="conv dlpreopen link"
! 6071: for file in $dlfiles $dlprefiles; do
! 6072: case $file in
! 6073: *.la) ;;
! 6074: *)
! 6075: func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
! 6076: ;;
! 6077: esac
! 6078: done
! 6079: ;;
! 6080: prog)
! 6081: compile_deplibs=
! 6082: finalize_deplibs=
! 6083: alldeplibs=no
! 6084: newdlfiles=
! 6085: newdlprefiles=
! 6086: passes="conv scan dlopen dlpreopen link"
! 6087: ;;
! 6088: *) passes="conv"
! 6089: ;;
! 6090: esac
! 6091:
! 6092: for pass in $passes; do
! 6093: # The preopen pass in lib mode reverses $deplibs; put it back here
! 6094: # so that -L comes before libs that need it for instance...
! 6095: if test "$linkmode,$pass" = "lib,link"; then
! 6096: ## FIXME: Find the place where the list is rebuilt in the wrong
! 6097: ## order, and fix it there properly
! 6098: tmp_deplibs=
! 6099: for deplib in $deplibs; do
! 6100: tmp_deplibs="$deplib $tmp_deplibs"
! 6101: done
! 6102: deplibs="$tmp_deplibs"
! 6103: fi
! 6104:
! 6105: if test "$linkmode,$pass" = "lib,link" ||
! 6106: test "$linkmode,$pass" = "prog,scan"; then
! 6107: libs="$deplibs"
! 6108: deplibs=
! 6109: fi
! 6110: if test "$linkmode" = prog; then
! 6111: case $pass in
! 6112: dlopen) libs="$dlfiles" ;;
! 6113: dlpreopen) libs="$dlprefiles" ;;
! 6114: link)
! 6115: libs="$deplibs %DEPLIBS%"
! 6116: test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
! 6117: ;;
! 6118: esac
! 6119: fi
! 6120: if test "$linkmode,$pass" = "lib,dlpreopen"; then
! 6121: # Collect and forward deplibs of preopened libtool libs
! 6122: for lib in $dlprefiles; do
! 6123: # Ignore non-libtool-libs
! 6124: dependency_libs=
! 6125: func_resolve_sysroot "$lib"
! 6126: case $lib in
! 6127: *.la) func_source "$func_resolve_sysroot_result" ;;
! 6128: esac
! 6129:
! 6130: # Collect preopened libtool deplibs, except any this library
! 6131: # has declared as weak libs
! 6132: for deplib in $dependency_libs; do
! 6133: func_basename "$deplib"
! 6134: deplib_base=$func_basename_result
! 6135: case " $weak_libs " in
! 6136: *" $deplib_base "*) ;;
! 6137: *) func_append deplibs " $deplib" ;;
! 6138: esac
! 6139: done
! 6140: done
! 6141: libs="$dlprefiles"
! 6142: fi
! 6143: if test "$pass" = dlopen; then
! 6144: # Collect dlpreopened libraries
! 6145: save_deplibs="$deplibs"
! 6146: deplibs=
! 6147: fi
! 6148:
! 6149: for deplib in $libs; do
! 6150: lib=
! 6151: found=no
! 6152: case $deplib in
! 6153: -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
! 6154: if test "$linkmode,$pass" = "prog,link"; then
! 6155: compile_deplibs="$deplib $compile_deplibs"
! 6156: finalize_deplibs="$deplib $finalize_deplibs"
! 6157: else
! 6158: func_append compiler_flags " $deplib"
! 6159: if test "$linkmode" = lib ; then
! 6160: case "$new_inherited_linker_flags " in
! 6161: *" $deplib "*) ;;
! 6162: * ) func_append new_inherited_linker_flags " $deplib" ;;
! 6163: esac
! 6164: fi
! 6165: fi
! 6166: continue
! 6167: ;;
! 6168: -l*)
! 6169: if test "$linkmode" != lib && test "$linkmode" != prog; then
! 6170: func_warning "\`-l' is ignored for archives/objects"
! 6171: continue
! 6172: fi
! 6173: func_stripname '-l' '' "$deplib"
! 6174: name=$func_stripname_result
! 6175: if test "$linkmode" = lib; then
! 6176: searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
! 6177: else
! 6178: searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
! 6179: fi
! 6180: for searchdir in $searchdirs; do
! 6181: for search_ext in .la $std_shrext .so .a; do
! 6182: # Search the libtool library
! 6183: lib="$searchdir/lib${name}${search_ext}"
! 6184: if test -f "$lib"; then
! 6185: if test "$search_ext" = ".la"; then
! 6186: found=yes
! 6187: else
! 6188: found=no
! 6189: fi
! 6190: break 2
! 6191: fi
! 6192: done
! 6193: done
! 6194: if test "$found" != yes; then
! 6195: # deplib doesn't seem to be a libtool library
! 6196: if test "$linkmode,$pass" = "prog,link"; then
! 6197: compile_deplibs="$deplib $compile_deplibs"
! 6198: finalize_deplibs="$deplib $finalize_deplibs"
! 6199: else
! 6200: deplibs="$deplib $deplibs"
! 6201: test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
! 6202: fi
! 6203: continue
! 6204: else # deplib is a libtool library
! 6205: # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
! 6206: # We need to do some special things here, and not later.
! 6207: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6208: case " $predeps $postdeps " in
! 6209: *" $deplib "*)
! 6210: if func_lalib_p "$lib"; then
! 6211: library_names=
! 6212: old_library=
! 6213: func_source "$lib"
! 6214: for l in $old_library $library_names; do
! 6215: ll="$l"
! 6216: done
! 6217: if test "X$ll" = "X$old_library" ; then # only static version available
! 6218: found=no
! 6219: func_dirname "$lib" "" "."
! 6220: ladir="$func_dirname_result"
! 6221: lib=$ladir/$old_library
! 6222: if test "$linkmode,$pass" = "prog,link"; then
! 6223: compile_deplibs="$deplib $compile_deplibs"
! 6224: finalize_deplibs="$deplib $finalize_deplibs"
! 6225: else
! 6226: deplibs="$deplib $deplibs"
! 6227: test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
! 6228: fi
! 6229: continue
! 6230: fi
! 6231: fi
! 6232: ;;
! 6233: *) ;;
! 6234: esac
! 6235: fi
! 6236: fi
! 6237: ;; # -l
! 6238: *.ltframework)
! 6239: if test "$linkmode,$pass" = "prog,link"; then
! 6240: compile_deplibs="$deplib $compile_deplibs"
! 6241: finalize_deplibs="$deplib $finalize_deplibs"
! 6242: else
! 6243: deplibs="$deplib $deplibs"
! 6244: if test "$linkmode" = lib ; then
! 6245: case "$new_inherited_linker_flags " in
! 6246: *" $deplib "*) ;;
! 6247: * ) func_append new_inherited_linker_flags " $deplib" ;;
! 6248: esac
! 6249: fi
! 6250: fi
! 6251: continue
! 6252: ;;
! 6253: -L*)
! 6254: case $linkmode in
! 6255: lib)
! 6256: deplibs="$deplib $deplibs"
! 6257: test "$pass" = conv && continue
! 6258: newdependency_libs="$deplib $newdependency_libs"
! 6259: func_stripname '-L' '' "$deplib"
! 6260: func_resolve_sysroot "$func_stripname_result"
! 6261: func_append newlib_search_path " $func_resolve_sysroot_result"
! 6262: ;;
! 6263: prog)
! 6264: if test "$pass" = conv; then
! 6265: deplibs="$deplib $deplibs"
! 6266: continue
! 6267: fi
! 6268: if test "$pass" = scan; then
! 6269: deplibs="$deplib $deplibs"
! 6270: else
! 6271: compile_deplibs="$deplib $compile_deplibs"
! 6272: finalize_deplibs="$deplib $finalize_deplibs"
! 6273: fi
! 6274: func_stripname '-L' '' "$deplib"
! 6275: func_resolve_sysroot "$func_stripname_result"
! 6276: func_append newlib_search_path " $func_resolve_sysroot_result"
! 6277: ;;
! 6278: *)
! 6279: func_warning "\`-L' is ignored for archives/objects"
! 6280: ;;
! 6281: esac # linkmode
! 6282: continue
! 6283: ;; # -L
! 6284: -R*)
! 6285: if test "$pass" = link; then
! 6286: func_stripname '-R' '' "$deplib"
! 6287: func_resolve_sysroot "$func_stripname_result"
! 6288: dir=$func_resolve_sysroot_result
! 6289: # Make sure the xrpath contains only unique directories.
! 6290: case "$xrpath " in
! 6291: *" $dir "*) ;;
! 6292: *) func_append xrpath " $dir" ;;
! 6293: esac
! 6294: fi
! 6295: deplibs="$deplib $deplibs"
! 6296: continue
! 6297: ;;
! 6298: *.la)
! 6299: func_resolve_sysroot "$deplib"
! 6300: lib=$func_resolve_sysroot_result
! 6301: ;;
! 6302: *.$libext)
! 6303: if test "$pass" = conv; then
! 6304: deplibs="$deplib $deplibs"
! 6305: continue
! 6306: fi
! 6307: case $linkmode in
! 6308: lib)
! 6309: # Linking convenience modules into shared libraries is allowed,
! 6310: # but linking other static libraries is non-portable.
! 6311: case " $dlpreconveniencelibs " in
! 6312: *" $deplib "*) ;;
! 6313: *)
! 6314: valid_a_lib=no
! 6315: case $deplibs_check_method in
! 6316: match_pattern*)
! 6317: set dummy $deplibs_check_method; shift
! 6318: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 6319: if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
! 6320: | $EGREP "$match_pattern_regex" > /dev/null; then
! 6321: valid_a_lib=yes
! 6322: fi
! 6323: ;;
! 6324: pass_all)
! 6325: valid_a_lib=yes
! 6326: ;;
! 6327: esac
! 6328: if test "$valid_a_lib" != yes; then
! 6329: echo
! 6330: $ECHO "*** Warning: Trying to link with static lib archive $deplib."
! 6331: echo "*** I have the capability to make that library automatically link in when"
! 6332: echo "*** you link to this library. But I can only do this if you have a"
! 6333: echo "*** shared version of the library, which you do not appear to have"
! 6334: echo "*** because the file extensions .$libext of this argument makes me believe"
! 6335: echo "*** that it is just a static archive that I should not use here."
! 6336: else
! 6337: echo
! 6338: $ECHO "*** Warning: Linking the shared library $output against the"
! 6339: $ECHO "*** static library $deplib is not portable!"
! 6340: deplibs="$deplib $deplibs"
! 6341: fi
! 6342: ;;
! 6343: esac
! 6344: continue
! 6345: ;;
! 6346: prog)
! 6347: if test "$pass" != link; then
! 6348: deplibs="$deplib $deplibs"
! 6349: else
! 6350: compile_deplibs="$deplib $compile_deplibs"
! 6351: finalize_deplibs="$deplib $finalize_deplibs"
! 6352: fi
! 6353: continue
! 6354: ;;
! 6355: esac # linkmode
! 6356: ;; # *.$libext
! 6357: *.lo | *.$objext)
! 6358: if test "$pass" = conv; then
! 6359: deplibs="$deplib $deplibs"
! 6360: elif test "$linkmode" = prog; then
! 6361: if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
! 6362: # If there is no dlopen support or we're linking statically,
! 6363: # we need to preload.
! 6364: func_append newdlprefiles " $deplib"
! 6365: compile_deplibs="$deplib $compile_deplibs"
! 6366: finalize_deplibs="$deplib $finalize_deplibs"
! 6367: else
! 6368: func_append newdlfiles " $deplib"
! 6369: fi
! 6370: fi
! 6371: continue
! 6372: ;;
! 6373: %DEPLIBS%)
! 6374: alldeplibs=yes
! 6375: continue
! 6376: ;;
! 6377: esac # case $deplib
! 6378:
! 6379: if test "$found" = yes || test -f "$lib"; then :
! 6380: else
! 6381: func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
! 6382: fi
! 6383:
! 6384: # Check to see that this really is a libtool archive.
! 6385: func_lalib_unsafe_p "$lib" \
! 6386: || func_fatal_error "\`$lib' is not a valid libtool archive"
! 6387:
! 6388: func_dirname "$lib" "" "."
! 6389: ladir="$func_dirname_result"
! 6390:
! 6391: dlname=
! 6392: dlopen=
! 6393: dlpreopen=
! 6394: libdir=
! 6395: library_names=
! 6396: old_library=
! 6397: inherited_linker_flags=
! 6398: # If the library was installed with an old release of libtool,
! 6399: # it will not redefine variables installed, or shouldnotlink
! 6400: installed=yes
! 6401: shouldnotlink=no
! 6402: avoidtemprpath=
! 6403:
! 6404:
! 6405: # Read the .la file
! 6406: func_source "$lib"
! 6407:
! 6408: # Convert "-framework foo" to "foo.ltframework"
! 6409: if test -n "$inherited_linker_flags"; then
! 6410: tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
! 6411: for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
! 6412: case " $new_inherited_linker_flags " in
! 6413: *" $tmp_inherited_linker_flag "*) ;;
! 6414: *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
! 6415: esac
! 6416: done
! 6417: fi
! 6418: dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6419: if test "$linkmode,$pass" = "lib,link" ||
! 6420: test "$linkmode,$pass" = "prog,scan" ||
! 6421: { test "$linkmode" != prog && test "$linkmode" != lib; }; then
! 6422: test -n "$dlopen" && func_append dlfiles " $dlopen"
! 6423: test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
! 6424: fi
! 6425:
! 6426: if test "$pass" = conv; then
! 6427: # Only check for convenience libraries
! 6428: deplibs="$lib $deplibs"
! 6429: if test -z "$libdir"; then
! 6430: if test -z "$old_library"; then
! 6431: func_fatal_error "cannot find name of link library for \`$lib'"
! 6432: fi
! 6433: # It is a libtool convenience library, so add in its objects.
! 6434: func_append convenience " $ladir/$objdir/$old_library"
! 6435: func_append old_convenience " $ladir/$objdir/$old_library"
! 6436: tmp_libs=
! 6437: for deplib in $dependency_libs; do
! 6438: deplibs="$deplib $deplibs"
! 6439: if $opt_preserve_dup_deps ; then
! 6440: case "$tmp_libs " in
! 6441: *" $deplib "*) func_append specialdeplibs " $deplib" ;;
! 6442: esac
! 6443: fi
! 6444: func_append tmp_libs " $deplib"
! 6445: done
! 6446: elif test "$linkmode" != prog && test "$linkmode" != lib; then
! 6447: func_fatal_error "\`$lib' is not a convenience library"
! 6448: fi
! 6449: continue
! 6450: fi # $pass = conv
! 6451:
! 6452:
! 6453: # Get the name of the library we link against.
! 6454: linklib=
! 6455: if test -n "$old_library" &&
! 6456: { test "$prefer_static_libs" = yes ||
! 6457: test "$prefer_static_libs,$installed" = "built,no"; }; then
! 6458: linklib=$old_library
! 6459: else
! 6460: for l in $old_library $library_names; do
! 6461: linklib="$l"
! 6462: done
! 6463: fi
! 6464: if test -z "$linklib"; then
! 6465: func_fatal_error "cannot find name of link library for \`$lib'"
! 6466: fi
! 6467:
! 6468: # This library was specified with -dlopen.
! 6469: if test "$pass" = dlopen; then
! 6470: if test -z "$libdir"; then
! 6471: func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
! 6472: fi
! 6473: if test -z "$dlname" ||
! 6474: test "$dlopen_support" != yes ||
! 6475: test "$build_libtool_libs" = no; then
! 6476: # If there is no dlname, no dlopen support or we're linking
! 6477: # statically, we need to preload. We also need to preload any
! 6478: # dependent libraries so libltdl's deplib preloader doesn't
! 6479: # bomb out in the load deplibs phase.
! 6480: func_append dlprefiles " $lib $dependency_libs"
! 6481: else
! 6482: func_append newdlfiles " $lib"
! 6483: fi
! 6484: continue
! 6485: fi # $pass = dlopen
! 6486:
! 6487: # We need an absolute path.
! 6488: case $ladir in
! 6489: [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
! 6490: *)
! 6491: abs_ladir=`cd "$ladir" && pwd`
! 6492: if test -z "$abs_ladir"; then
! 6493: func_warning "cannot determine absolute directory name of \`$ladir'"
! 6494: func_warning "passing it literally to the linker, although it might fail"
! 6495: abs_ladir="$ladir"
! 6496: fi
! 6497: ;;
! 6498: esac
! 6499: func_basename "$lib"
! 6500: laname="$func_basename_result"
! 6501:
! 6502: # Find the relevant object directory and library name.
! 6503: if test "X$installed" = Xyes; then
! 6504: if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
! 6505: func_warning "library \`$lib' was moved."
! 6506: dir="$ladir"
! 6507: absdir="$abs_ladir"
! 6508: libdir="$abs_ladir"
! 6509: else
! 6510: dir="$lt_sysroot$libdir"
! 6511: absdir="$lt_sysroot$libdir"
! 6512: fi
! 6513: test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
! 6514: else
! 6515: if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
! 6516: dir="$ladir"
! 6517: absdir="$abs_ladir"
! 6518: # Remove this search path later
! 6519: func_append notinst_path " $abs_ladir"
! 6520: else
! 6521: dir="$ladir/$objdir"
! 6522: absdir="$abs_ladir/$objdir"
! 6523: # Remove this search path later
! 6524: func_append notinst_path " $abs_ladir"
! 6525: fi
! 6526: fi # $installed = yes
! 6527: func_stripname 'lib' '.la' "$laname"
! 6528: name=$func_stripname_result
! 6529:
! 6530: # This library was specified with -dlpreopen.
! 6531: if test "$pass" = dlpreopen; then
! 6532: if test -z "$libdir" && test "$linkmode" = prog; then
! 6533: func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
! 6534: fi
! 6535: case "$host" in
! 6536: # special handling for platforms with PE-DLLs.
! 6537: *cygwin* | *mingw* | *cegcc* )
! 6538: # Linker will automatically link against shared library if both
! 6539: # static and shared are present. Therefore, ensure we extract
! 6540: # symbols from the import library if a shared library is present
! 6541: # (otherwise, the dlopen module name will be incorrect). We do
! 6542: # this by putting the import library name into $newdlprefiles.
! 6543: # We recover the dlopen module name by 'saving' the la file
! 6544: # name in a special purpose variable, and (later) extracting the
! 6545: # dlname from the la file.
! 6546: if test -n "$dlname"; then
! 6547: func_tr_sh "$dir/$linklib"
! 6548: eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
! 6549: func_append newdlprefiles " $dir/$linklib"
! 6550: else
! 6551: func_append newdlprefiles " $dir/$old_library"
! 6552: # Keep a list of preopened convenience libraries to check
! 6553: # that they are being used correctly in the link pass.
! 6554: test -z "$libdir" && \
! 6555: func_append dlpreconveniencelibs " $dir/$old_library"
! 6556: fi
! 6557: ;;
! 6558: * )
! 6559: # Prefer using a static library (so that no silly _DYNAMIC symbols
! 6560: # are required to link).
! 6561: if test -n "$old_library"; then
! 6562: func_append newdlprefiles " $dir/$old_library"
! 6563: # Keep a list of preopened convenience libraries to check
! 6564: # that they are being used correctly in the link pass.
! 6565: test -z "$libdir" && \
! 6566: func_append dlpreconveniencelibs " $dir/$old_library"
! 6567: # Otherwise, use the dlname, so that lt_dlopen finds it.
! 6568: elif test -n "$dlname"; then
! 6569: func_append newdlprefiles " $dir/$dlname"
! 6570: else
! 6571: func_append newdlprefiles " $dir/$linklib"
! 6572: fi
! 6573: ;;
! 6574: esac
! 6575: fi # $pass = dlpreopen
! 6576:
! 6577: if test -z "$libdir"; then
! 6578: # Link the convenience library
! 6579: if test "$linkmode" = lib; then
! 6580: deplibs="$dir/$old_library $deplibs"
! 6581: elif test "$linkmode,$pass" = "prog,link"; then
! 6582: compile_deplibs="$dir/$old_library $compile_deplibs"
! 6583: finalize_deplibs="$dir/$old_library $finalize_deplibs"
! 6584: else
! 6585: deplibs="$lib $deplibs" # used for prog,scan pass
! 6586: fi
! 6587: continue
! 6588: fi
! 6589:
! 6590:
! 6591: if test "$linkmode" = prog && test "$pass" != link; then
! 6592: func_append newlib_search_path " $ladir"
! 6593: deplibs="$lib $deplibs"
! 6594:
! 6595: linkalldeplibs=no
! 6596: if test "$link_all_deplibs" != no || test -z "$library_names" ||
! 6597: test "$build_libtool_libs" = no; then
! 6598: linkalldeplibs=yes
! 6599: fi
! 6600:
! 6601: tmp_libs=
! 6602: for deplib in $dependency_libs; do
! 6603: case $deplib in
! 6604: -L*) func_stripname '-L' '' "$deplib"
! 6605: func_resolve_sysroot "$func_stripname_result"
! 6606: func_append newlib_search_path " $func_resolve_sysroot_result"
! 6607: ;;
! 6608: esac
! 6609: # Need to link against all dependency_libs?
! 6610: if test "$linkalldeplibs" = yes; then
! 6611: deplibs="$deplib $deplibs"
! 6612: else
! 6613: # Need to hardcode shared library paths
! 6614: # or/and link against static libraries
! 6615: newdependency_libs="$deplib $newdependency_libs"
! 6616: fi
! 6617: if $opt_preserve_dup_deps ; then
! 6618: case "$tmp_libs " in
! 6619: *" $deplib "*) func_append specialdeplibs " $deplib" ;;
! 6620: esac
! 6621: fi
! 6622: func_append tmp_libs " $deplib"
! 6623: done # for deplib
! 6624: continue
! 6625: fi # $linkmode = prog...
! 6626:
! 6627: if test "$linkmode,$pass" = "prog,link"; then
! 6628: if test -n "$library_names" &&
! 6629: { { test "$prefer_static_libs" = no ||
! 6630: test "$prefer_static_libs,$installed" = "built,yes"; } ||
! 6631: test -z "$old_library"; }; then
! 6632: # We need to hardcode the library path
! 6633: if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
! 6634: # Make sure the rpath contains only unique directories.
! 6635: case "$temp_rpath:" in
! 6636: *"$absdir:"*) ;;
! 6637: *) func_append temp_rpath "$absdir:" ;;
! 6638: esac
! 6639: fi
! 6640:
! 6641: # Hardcode the library path.
! 6642: # Skip directories that are in the system default run-time
! 6643: # search path.
! 6644: case " $sys_lib_dlsearch_path " in
! 6645: *" $absdir "*) ;;
! 6646: *)
! 6647: case "$compile_rpath " in
! 6648: *" $absdir "*) ;;
! 6649: *) func_append compile_rpath " $absdir" ;;
! 6650: esac
! 6651: ;;
! 6652: esac
! 6653: case " $sys_lib_dlsearch_path " in
! 6654: *" $libdir "*) ;;
! 6655: *)
! 6656: case "$finalize_rpath " in
! 6657: *" $libdir "*) ;;
! 6658: *) func_append finalize_rpath " $libdir" ;;
! 6659: esac
! 6660: ;;
! 6661: esac
! 6662: fi # $linkmode,$pass = prog,link...
! 6663:
! 6664: if test "$alldeplibs" = yes &&
! 6665: { test "$deplibs_check_method" = pass_all ||
! 6666: { test "$build_libtool_libs" = yes &&
! 6667: test -n "$library_names"; }; }; then
! 6668: # We only need to search for static libraries
! 6669: continue
! 6670: fi
! 6671: fi
! 6672:
! 6673: link_static=no # Whether the deplib will be linked statically
! 6674: use_static_libs=$prefer_static_libs
! 6675: if test "$use_static_libs" = built && test "$installed" = yes; then
! 6676: use_static_libs=no
! 6677: fi
! 6678: if test -n "$library_names" &&
! 6679: { test "$use_static_libs" = no || test -z "$old_library"; }; then
! 6680: case $host in
! 6681: *cygwin* | *mingw* | *cegcc*)
! 6682: # No point in relinking DLLs because paths are not encoded
! 6683: func_append notinst_deplibs " $lib"
! 6684: need_relink=no
! 6685: ;;
! 6686: *)
! 6687: if test "$installed" = no; then
! 6688: func_append notinst_deplibs " $lib"
! 6689: need_relink=yes
! 6690: fi
! 6691: ;;
! 6692: esac
! 6693: # This is a shared library
! 6694:
! 6695: # Warn about portability, can't link against -module's on some
! 6696: # systems (darwin). Don't bleat about dlopened modules though!
! 6697: dlopenmodule=""
! 6698: for dlpremoduletest in $dlprefiles; do
! 6699: if test "X$dlpremoduletest" = "X$lib"; then
! 6700: dlopenmodule="$dlpremoduletest"
! 6701: break
! 6702: fi
! 6703: done
! 6704: if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
! 6705: echo
! 6706: if test "$linkmode" = prog; then
! 6707: $ECHO "*** Warning: Linking the executable $output against the loadable module"
! 6708: else
! 6709: $ECHO "*** Warning: Linking the shared library $output against the loadable module"
! 6710: fi
! 6711: $ECHO "*** $linklib is not portable!"
! 6712: fi
! 6713: if test "$linkmode" = lib &&
! 6714: test "$hardcode_into_libs" = yes; then
! 6715: # Hardcode the library path.
! 6716: # Skip directories that are in the system default run-time
! 6717: # search path.
! 6718: case " $sys_lib_dlsearch_path " in
! 6719: *" $absdir "*) ;;
! 6720: *)
! 6721: case "$compile_rpath " in
! 6722: *" $absdir "*) ;;
! 6723: *) func_append compile_rpath " $absdir" ;;
! 6724: esac
! 6725: ;;
! 6726: esac
! 6727: case " $sys_lib_dlsearch_path " in
! 6728: *" $libdir "*) ;;
! 6729: *)
! 6730: case "$finalize_rpath " in
! 6731: *" $libdir "*) ;;
! 6732: *) func_append finalize_rpath " $libdir" ;;
! 6733: esac
! 6734: ;;
! 6735: esac
! 6736: fi
! 6737:
! 6738: if test -n "$old_archive_from_expsyms_cmds"; then
! 6739: # figure out the soname
! 6740: set dummy $library_names
! 6741: shift
! 6742: realname="$1"
! 6743: shift
! 6744: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6745: # use dlname if we got it. it's perfectly good, no?
! 6746: if test -n "$dlname"; then
! 6747: soname="$dlname"
! 6748: elif test -n "$soname_spec"; then
! 6749: # bleh windows
! 6750: case $host in
! 6751: *cygwin* | mingw* | *cegcc*)
! 6752: func_arith $current - $age
! 6753: major=$func_arith_result
! 6754: versuffix="-$major"
! 6755: ;;
! 6756: esac
! 6757: eval soname=\"$soname_spec\"
! 6758: else
! 6759: soname="$realname"
! 6760: fi
! 6761:
! 6762: # Make a new name for the extract_expsyms_cmds to use
! 6763: soroot="$soname"
! 6764: func_basename "$soroot"
! 6765: soname="$func_basename_result"
! 6766: func_stripname 'lib' '.dll' "$soname"
! 6767: newlib=libimp-$func_stripname_result.a
! 6768:
! 6769: # If the library has no export list, then create one now
! 6770: if test -f "$output_objdir/$soname-def"; then :
! 6771: else
! 6772: func_verbose "extracting exported symbol list from \`$soname'"
! 6773: func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
! 6774: fi
! 6775:
! 6776: # Create $newlib
! 6777: if test -f "$output_objdir/$newlib"; then :; else
! 6778: func_verbose "generating import library for \`$soname'"
! 6779: func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
! 6780: fi
! 6781: # make sure the library variables are pointing to the new library
! 6782: dir=$output_objdir
! 6783: linklib=$newlib
! 6784: fi # test -n "$old_archive_from_expsyms_cmds"
! 6785:
! 6786: if test "$linkmode" = prog || test "$opt_mode" != relink; then
! 6787: add_shlibpath=
! 6788: add_dir=
! 6789: add=
! 6790: lib_linked=yes
! 6791: case $hardcode_action in
! 6792: immediate | unsupported)
! 6793: if test "$hardcode_direct" = no; then
! 6794: add="$dir/$linklib"
! 6795: case $host in
! 6796: *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
! 6797: *-*-sysv4*uw2*) add_dir="-L$dir" ;;
! 6798: *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
! 6799: *-*-unixware7*) add_dir="-L$dir" ;;
! 6800: *-*-darwin* )
! 6801: # if the lib is a (non-dlopened) module then we can not
! 6802: # link against it, someone is ignoring the earlier warnings
! 6803: if /usr/bin/file -L $add 2> /dev/null |
! 6804: $GREP ": [^:]* bundle" >/dev/null ; then
! 6805: if test "X$dlopenmodule" != "X$lib"; then
! 6806: $ECHO "*** Warning: lib $linklib is a module, not a shared library"
! 6807: if test -z "$old_library" ; then
! 6808: echo
! 6809: echo "*** And there doesn't seem to be a static archive available"
! 6810: echo "*** The link will probably fail, sorry"
! 6811: else
! 6812: add="$dir/$old_library"
! 6813: fi
! 6814: elif test -n "$old_library"; then
! 6815: add="$dir/$old_library"
! 6816: fi
! 6817: fi
! 6818: esac
! 6819: elif test "$hardcode_minus_L" = no; then
! 6820: case $host in
! 6821: *-*-sunos*) add_shlibpath="$dir" ;;
! 6822: esac
! 6823: add_dir="-L$dir"
! 6824: add="-l$name"
! 6825: elif test "$hardcode_shlibpath_var" = no; then
! 6826: add_shlibpath="$dir"
! 6827: add="-l$name"
! 6828: else
! 6829: lib_linked=no
! 6830: fi
! 6831: ;;
! 6832: relink)
! 6833: if test "$hardcode_direct" = yes &&
! 6834: test "$hardcode_direct_absolute" = no; then
! 6835: add="$dir/$linklib"
! 6836: elif test "$hardcode_minus_L" = yes; then
! 6837: add_dir="-L$dir"
! 6838: # Try looking first in the location we're being installed to.
! 6839: if test -n "$inst_prefix_dir"; then
! 6840: case $libdir in
! 6841: [\\/]*)
! 6842: func_append add_dir " -L$inst_prefix_dir$libdir"
! 6843: ;;
! 6844: esac
! 6845: fi
! 6846: add="-l$name"
! 6847: elif test "$hardcode_shlibpath_var" = yes; then
! 6848: add_shlibpath="$dir"
! 6849: add="-l$name"
! 6850: else
! 6851: lib_linked=no
! 6852: fi
! 6853: ;;
! 6854: *) lib_linked=no ;;
! 6855: esac
! 6856:
! 6857: if test "$lib_linked" != yes; then
! 6858: func_fatal_configuration "unsupported hardcode properties"
! 6859: fi
! 6860:
! 6861: if test -n "$add_shlibpath"; then
! 6862: case :$compile_shlibpath: in
! 6863: *":$add_shlibpath:"*) ;;
! 6864: *) func_append compile_shlibpath "$add_shlibpath:" ;;
! 6865: esac
! 6866: fi
! 6867: if test "$linkmode" = prog; then
! 6868: test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
! 6869: test -n "$add" && compile_deplibs="$add $compile_deplibs"
! 6870: else
! 6871: test -n "$add_dir" && deplibs="$add_dir $deplibs"
! 6872: test -n "$add" && deplibs="$add $deplibs"
! 6873: if test "$hardcode_direct" != yes &&
! 6874: test "$hardcode_minus_L" != yes &&
! 6875: test "$hardcode_shlibpath_var" = yes; then
! 6876: case :$finalize_shlibpath: in
! 6877: *":$libdir:"*) ;;
! 6878: *) func_append finalize_shlibpath "$libdir:" ;;
! 6879: esac
! 6880: fi
! 6881: fi
! 6882: fi
! 6883:
! 6884: if test "$linkmode" = prog || test "$opt_mode" = relink; then
! 6885: add_shlibpath=
! 6886: add_dir=
! 6887: add=
! 6888: # Finalize command for both is simple: just hardcode it.
! 6889: if test "$hardcode_direct" = yes &&
! 6890: test "$hardcode_direct_absolute" = no; then
! 6891: add="$libdir/$linklib"
! 6892: elif test "$hardcode_minus_L" = yes; then
! 6893: add_dir="-L$libdir"
! 6894: add="-l$name"
! 6895: elif test "$hardcode_shlibpath_var" = yes; then
! 6896: case :$finalize_shlibpath: in
! 6897: *":$libdir:"*) ;;
! 6898: *) func_append finalize_shlibpath "$libdir:" ;;
! 6899: esac
! 6900: add="-l$name"
! 6901: elif test "$hardcode_automatic" = yes; then
! 6902: if test -n "$inst_prefix_dir" &&
! 6903: test -f "$inst_prefix_dir$libdir/$linklib" ; then
! 6904: add="$inst_prefix_dir$libdir/$linklib"
! 6905: else
! 6906: add="$libdir/$linklib"
! 6907: fi
! 6908: else
! 6909: # We cannot seem to hardcode it, guess we'll fake it.
! 6910: add_dir="-L$libdir"
! 6911: # Try looking first in the location we're being installed to.
! 6912: if test -n "$inst_prefix_dir"; then
! 6913: case $libdir in
! 6914: [\\/]*)
! 6915: func_append add_dir " -L$inst_prefix_dir$libdir"
! 6916: ;;
! 6917: esac
! 6918: fi
! 6919: add="-l$name"
! 6920: fi
! 6921:
! 6922: if test "$linkmode" = prog; then
! 6923: test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
! 6924: test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
! 6925: else
! 6926: test -n "$add_dir" && deplibs="$add_dir $deplibs"
! 6927: test -n "$add" && deplibs="$add $deplibs"
! 6928: fi
! 6929: fi
! 6930: elif test "$linkmode" = prog; then
! 6931: # Here we assume that one of hardcode_direct or hardcode_minus_L
! 6932: # is not unsupported. This is valid on all known static and
! 6933: # shared platforms.
! 6934: if test "$hardcode_direct" != unsupported; then
! 6935: test -n "$old_library" && linklib="$old_library"
! 6936: compile_deplibs="$dir/$linklib $compile_deplibs"
! 6937: finalize_deplibs="$dir/$linklib $finalize_deplibs"
! 6938: else
! 6939: compile_deplibs="-l$name -L$dir $compile_deplibs"
! 6940: finalize_deplibs="-l$name -L$dir $finalize_deplibs"
! 6941: fi
! 6942: elif test "$build_libtool_libs" = yes; then
! 6943: # Not a shared library
! 6944: if test "$deplibs_check_method" != pass_all; then
! 6945: # We're trying link a shared library against a static one
! 6946: # but the system doesn't support it.
! 6947:
! 6948: # Just print a warning and add the library to dependency_libs so
! 6949: # that the program can be linked against the static library.
! 6950: echo
! 6951: $ECHO "*** Warning: This system can not link to static lib archive $lib."
! 6952: echo "*** I have the capability to make that library automatically link in when"
! 6953: echo "*** you link to this library. But I can only do this if you have a"
! 6954: echo "*** shared version of the library, which you do not appear to have."
! 6955: if test "$module" = yes; then
! 6956: echo "*** But as you try to build a module library, libtool will still create "
! 6957: echo "*** a static module, that should work as long as the dlopening application"
! 6958: echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
! 6959: if test -z "$global_symbol_pipe"; then
! 6960: echo
! 6961: echo "*** However, this would only work if libtool was able to extract symbol"
! 6962: echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
! 6963: echo "*** not find such a program. So, this module is probably useless."
! 6964: echo "*** \`nm' from GNU binutils and a full rebuild may help."
! 6965: fi
! 6966: if test "$build_old_libs" = no; then
! 6967: build_libtool_libs=module
! 6968: build_old_libs=yes
! 6969: else
! 6970: build_libtool_libs=no
! 6971: fi
! 6972: fi
! 6973: else
! 6974: deplibs="$dir/$old_library $deplibs"
! 6975: link_static=yes
! 6976: fi
! 6977: fi # link shared/static library?
! 6978:
! 6979: if test "$linkmode" = lib; then
! 6980: if test -n "$dependency_libs" &&
! 6981: { test "$hardcode_into_libs" != yes ||
! 6982: test "$build_old_libs" = yes ||
! 6983: test "$link_static" = yes; }; then
! 6984: # Extract -R from dependency_libs
! 6985: temp_deplibs=
! 6986: for libdir in $dependency_libs; do
! 6987: case $libdir in
! 6988: -R*) func_stripname '-R' '' "$libdir"
! 6989: temp_xrpath=$func_stripname_result
! 6990: case " $xrpath " in
! 6991: *" $temp_xrpath "*) ;;
! 6992: *) func_append xrpath " $temp_xrpath";;
! 6993: esac;;
! 6994: *) func_append temp_deplibs " $libdir";;
! 6995: esac
! 6996: done
! 6997: dependency_libs="$temp_deplibs"
! 6998: fi
! 6999:
! 7000: func_append newlib_search_path " $absdir"
! 7001: # Link against this library
! 7002: test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
! 7003: # ... and its dependency_libs
! 7004: tmp_libs=
! 7005: for deplib in $dependency_libs; do
! 7006: newdependency_libs="$deplib $newdependency_libs"
! 7007: case $deplib in
! 7008: -L*) func_stripname '-L' '' "$deplib"
! 7009: func_resolve_sysroot "$func_stripname_result";;
! 7010: *) func_resolve_sysroot "$deplib" ;;
! 7011: esac
! 7012: if $opt_preserve_dup_deps ; then
! 7013: case "$tmp_libs " in
! 7014: *" $func_resolve_sysroot_result "*)
! 7015: func_append specialdeplibs " $func_resolve_sysroot_result" ;;
! 7016: esac
! 7017: fi
! 7018: func_append tmp_libs " $func_resolve_sysroot_result"
! 7019: done
! 7020:
! 7021: if test "$link_all_deplibs" != no; then
! 7022: # Add the search paths of all dependency libraries
! 7023: for deplib in $dependency_libs; do
! 7024: path=
! 7025: case $deplib in
! 7026: -L*) path="$deplib" ;;
! 7027: *.la)
! 7028: func_resolve_sysroot "$deplib"
! 7029: deplib=$func_resolve_sysroot_result
! 7030: func_dirname "$deplib" "" "."
! 7031: dir=$func_dirname_result
! 7032: # We need an absolute path.
! 7033: case $dir in
! 7034: [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
! 7035: *)
! 7036: absdir=`cd "$dir" && pwd`
! 7037: if test -z "$absdir"; then
! 7038: func_warning "cannot determine absolute directory name of \`$dir'"
! 7039: absdir="$dir"
! 7040: fi
! 7041: ;;
! 7042: esac
! 7043: if $GREP "^installed=no" $deplib > /dev/null; then
! 7044: case $host in
! 7045: *-*-darwin*)
! 7046: depdepl=
! 7047: eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
! 7048: if test -n "$deplibrary_names" ; then
! 7049: for tmp in $deplibrary_names ; do
! 7050: depdepl=$tmp
! 7051: done
! 7052: if test -f "$absdir/$objdir/$depdepl" ; then
! 7053: depdepl="$absdir/$objdir/$depdepl"
! 7054: darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
! 7055: if test -z "$darwin_install_name"; then
! 7056: darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
! 7057: fi
! 7058: func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
! 7059: func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
! 7060: path=
! 7061: fi
! 7062: fi
! 7063: ;;
! 7064: *)
! 7065: path="-L$absdir/$objdir"
! 7066: ;;
! 7067: esac
! 7068: else
! 7069: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
! 7070: test -z "$libdir" && \
! 7071: func_fatal_error "\`$deplib' is not a valid libtool archive"
! 7072: test "$absdir" != "$libdir" && \
! 7073: func_warning "\`$deplib' seems to be moved"
! 7074:
! 7075: path="-L$absdir"
! 7076: fi
! 7077: ;;
! 7078: esac
! 7079: case " $deplibs " in
! 7080: *" $path "*) ;;
! 7081: *) deplibs="$path $deplibs" ;;
! 7082: esac
! 7083: done
! 7084: fi # link_all_deplibs != no
! 7085: fi # linkmode = lib
! 7086: done # for deplib in $libs
! 7087: if test "$pass" = link; then
! 7088: if test "$linkmode" = "prog"; then
! 7089: compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
! 7090: finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
! 7091: else
! 7092: compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
! 7093: fi
! 7094: fi
! 7095: dependency_libs="$newdependency_libs"
! 7096: if test "$pass" = dlpreopen; then
! 7097: # Link the dlpreopened libraries before other libraries
! 7098: for deplib in $save_deplibs; do
! 7099: deplibs="$deplib $deplibs"
! 7100: done
! 7101: fi
! 7102: if test "$pass" != dlopen; then
! 7103: if test "$pass" != conv; then
! 7104: # Make sure lib_search_path contains only unique directories.
! 7105: lib_search_path=
! 7106: for dir in $newlib_search_path; do
! 7107: case "$lib_search_path " in
! 7108: *" $dir "*) ;;
! 7109: *) func_append lib_search_path " $dir" ;;
! 7110: esac
! 7111: done
! 7112: newlib_search_path=
! 7113: fi
! 7114:
! 7115: if test "$linkmode,$pass" != "prog,link"; then
! 7116: vars="deplibs"
! 7117: else
! 7118: vars="compile_deplibs finalize_deplibs"
! 7119: fi
! 7120: for var in $vars dependency_libs; do
! 7121: # Add libraries to $var in reverse order
! 7122: eval tmp_libs=\"\$$var\"
! 7123: new_libs=
! 7124: for deplib in $tmp_libs; do
! 7125: # FIXME: Pedantically, this is the right thing to do, so
! 7126: # that some nasty dependency loop isn't accidentally
! 7127: # broken:
! 7128: #new_libs="$deplib $new_libs"
! 7129: # Pragmatically, this seems to cause very few problems in
! 7130: # practice:
! 7131: case $deplib in
! 7132: -L*) new_libs="$deplib $new_libs" ;;
! 7133: -R*) ;;
! 7134: *)
! 7135: # And here is the reason: when a library appears more
! 7136: # than once as an explicit dependence of a library, or
! 7137: # is implicitly linked in more than once by the
! 7138: # compiler, it is considered special, and multiple
! 7139: # occurrences thereof are not removed. Compare this
! 7140: # with having the same library being listed as a
! 7141: # dependency of multiple other libraries: in this case,
! 7142: # we know (pedantically, we assume) the library does not
! 7143: # need to be listed more than once, so we keep only the
! 7144: # last copy. This is not always right, but it is rare
! 7145: # enough that we require users that really mean to play
! 7146: # such unportable linking tricks to link the library
! 7147: # using -Wl,-lname, so that libtool does not consider it
! 7148: # for duplicate removal.
! 7149: case " $specialdeplibs " in
! 7150: *" $deplib "*) new_libs="$deplib $new_libs" ;;
! 7151: *)
! 7152: case " $new_libs " in
! 7153: *" $deplib "*) ;;
! 7154: *) new_libs="$deplib $new_libs" ;;
! 7155: esac
! 7156: ;;
! 7157: esac
! 7158: ;;
! 7159: esac
! 7160: done
! 7161: tmp_libs=
! 7162: for deplib in $new_libs; do
! 7163: case $deplib in
! 7164: -L*)
! 7165: case " $tmp_libs " in
! 7166: *" $deplib "*) ;;
! 7167: *) func_append tmp_libs " $deplib" ;;
! 7168: esac
! 7169: ;;
! 7170: *) func_append tmp_libs " $deplib" ;;
! 7171: esac
! 7172: done
! 7173: eval $var=\"$tmp_libs\"
! 7174: done # for var
! 7175: fi
! 7176: # Last step: remove runtime libs from dependency_libs
! 7177: # (they stay in deplibs)
! 7178: tmp_libs=
! 7179: for i in $dependency_libs ; do
! 7180: case " $predeps $postdeps $compiler_lib_search_path " in
! 7181: *" $i "*)
! 7182: i=""
! 7183: ;;
! 7184: esac
! 7185: if test -n "$i" ; then
! 7186: func_append tmp_libs " $i"
! 7187: fi
! 7188: done
! 7189: dependency_libs=$tmp_libs
! 7190: done # for pass
! 7191: if test "$linkmode" = prog; then
! 7192: dlfiles="$newdlfiles"
! 7193: fi
! 7194: if test "$linkmode" = prog || test "$linkmode" = lib; then
! 7195: dlprefiles="$newdlprefiles"
! 7196: fi
! 7197:
! 7198: case $linkmode in
! 7199: oldlib)
! 7200: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 7201: func_warning "\`-dlopen' is ignored for archives"
! 7202: fi
! 7203:
! 7204: case " $deplibs" in
! 7205: *\ -l* | *\ -L*)
! 7206: func_warning "\`-l' and \`-L' are ignored for archives" ;;
! 7207: esac
! 7208:
! 7209: test -n "$rpath" && \
! 7210: func_warning "\`-rpath' is ignored for archives"
! 7211:
! 7212: test -n "$xrpath" && \
! 7213: func_warning "\`-R' is ignored for archives"
! 7214:
! 7215: test -n "$vinfo" && \
! 7216: func_warning "\`-version-info/-version-number' is ignored for archives"
! 7217:
! 7218: test -n "$release" && \
! 7219: func_warning "\`-release' is ignored for archives"
! 7220:
! 7221: test -n "$export_symbols$export_symbols_regex" && \
! 7222: func_warning "\`-export-symbols' is ignored for archives"
! 7223:
! 7224: # Now set the variables for building old libraries.
! 7225: build_libtool_libs=no
! 7226: oldlibs="$output"
! 7227: func_append objs "$old_deplibs"
! 7228: ;;
! 7229:
! 7230: lib)
! 7231: # Make sure we only generate libraries of the form `libNAME.la'.
! 7232: case $outputname in
! 7233: lib*)
! 7234: func_stripname 'lib' '.la' "$outputname"
! 7235: name=$func_stripname_result
! 7236: eval shared_ext=\"$shrext_cmds\"
! 7237: eval libname=\"$libname_spec\"
! 7238: ;;
! 7239: *)
! 7240: test "$module" = no && \
! 7241: func_fatal_help "libtool library \`$output' must begin with \`lib'"
! 7242:
! 7243: if test "$need_lib_prefix" != no; then
! 7244: # Add the "lib" prefix for modules if required
! 7245: func_stripname '' '.la' "$outputname"
! 7246: name=$func_stripname_result
! 7247: eval shared_ext=\"$shrext_cmds\"
! 7248: eval libname=\"$libname_spec\"
! 7249: else
! 7250: func_stripname '' '.la' "$outputname"
! 7251: libname=$func_stripname_result
! 7252: fi
! 7253: ;;
! 7254: esac
! 7255:
! 7256: if test -n "$objs"; then
! 7257: if test "$deplibs_check_method" != pass_all; then
! 7258: func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
! 7259: else
! 7260: echo
! 7261: $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
! 7262: $ECHO "*** objects $objs is not portable!"
! 7263: func_append libobjs " $objs"
! 7264: fi
! 7265: fi
! 7266:
! 7267: test "$dlself" != no && \
! 7268: func_warning "\`-dlopen self' is ignored for libtool libraries"
! 7269:
! 7270: set dummy $rpath
! 7271: shift
! 7272: test "$#" -gt 1 && \
! 7273: func_warning "ignoring multiple \`-rpath's for a libtool library"
! 7274:
! 7275: install_libdir="$1"
! 7276:
! 7277: oldlibs=
! 7278: if test -z "$rpath"; then
! 7279: if test "$build_libtool_libs" = yes; then
! 7280: # Building a libtool convenience library.
! 7281: # Some compilers have problems with a `.al' extension so
! 7282: # convenience libraries should have the same extension an
! 7283: # archive normally would.
! 7284: oldlibs="$output_objdir/$libname.$libext $oldlibs"
! 7285: build_libtool_libs=convenience
! 7286: build_old_libs=yes
! 7287: fi
! 7288:
! 7289: test -n "$vinfo" && \
! 7290: func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
! 7291:
! 7292: test -n "$release" && \
! 7293: func_warning "\`-release' is ignored for convenience libraries"
! 7294: else
! 7295:
! 7296: # Parse the version information argument.
! 7297: save_ifs="$IFS"; IFS=':'
! 7298: set dummy $vinfo 0 0 0
! 7299: shift
! 7300: IFS="$save_ifs"
! 7301:
! 7302: test -n "$7" && \
! 7303: func_fatal_help "too many parameters to \`-version-info'"
! 7304:
! 7305: # convert absolute version numbers to libtool ages
! 7306: # this retains compatibility with .la files and attempts
! 7307: # to make the code below a bit more comprehensible
! 7308:
! 7309: case $vinfo_number in
! 7310: yes)
! 7311: number_major="$1"
! 7312: number_minor="$2"
! 7313: number_revision="$3"
! 7314: #
! 7315: # There are really only two kinds -- those that
! 7316: # use the current revision as the major version
! 7317: # and those that subtract age and use age as
! 7318: # a minor version. But, then there is irix
! 7319: # which has an extra 1 added just for fun
! 7320: #
! 7321: case $version_type in
! 7322: darwin|linux|osf|windows|none)
! 7323: func_arith $number_major + $number_minor
! 7324: current=$func_arith_result
! 7325: age="$number_minor"
! 7326: revision="$number_revision"
! 7327: ;;
! 7328: freebsd-aout|freebsd-elf|qnx|sunos)
! 7329: current="$number_major"
! 7330: revision="$number_minor"
! 7331: age="0"
! 7332: ;;
! 7333: irix|nonstopux)
! 7334: func_arith $number_major + $number_minor
! 7335: current=$func_arith_result
! 7336: age="$number_minor"
! 7337: revision="$number_minor"
! 7338: lt_irix_increment=no
! 7339: ;;
! 7340: *)
! 7341: func_fatal_configuration "$modename: unknown library version type \`$version_type'"
! 7342: ;;
! 7343: esac
! 7344: ;;
! 7345: no)
! 7346: current="$1"
! 7347: revision="$2"
! 7348: age="$3"
! 7349: ;;
! 7350: esac
! 7351:
! 7352: # Check that each of the things are valid numbers.
! 7353: case $current in
! 7354: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 7355: *)
! 7356: func_error "CURRENT \`$current' must be a nonnegative integer"
! 7357: func_fatal_error "\`$vinfo' is not valid version information"
! 7358: ;;
! 7359: esac
! 7360:
! 7361: case $revision in
! 7362: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 7363: *)
! 7364: func_error "REVISION \`$revision' must be a nonnegative integer"
! 7365: func_fatal_error "\`$vinfo' is not valid version information"
! 7366: ;;
! 7367: esac
! 7368:
! 7369: case $age in
! 7370: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 7371: *)
! 7372: func_error "AGE \`$age' must be a nonnegative integer"
! 7373: func_fatal_error "\`$vinfo' is not valid version information"
! 7374: ;;
! 7375: esac
! 7376:
! 7377: if test "$age" -gt "$current"; then
! 7378: func_error "AGE \`$age' is greater than the current interface number \`$current'"
! 7379: func_fatal_error "\`$vinfo' is not valid version information"
! 7380: fi
! 7381:
! 7382: # Calculate the version variables.
! 7383: major=
! 7384: versuffix=
! 7385: verstring=
! 7386: case $version_type in
! 7387: none) ;;
! 7388:
! 7389: darwin)
! 7390: # Like Linux, but with the current version available in
! 7391: # verstring for coding it into the library header
! 7392: func_arith $current - $age
! 7393: major=.$func_arith_result
! 7394: versuffix="$major.$age.$revision"
! 7395: # Darwin ld doesn't like 0 for these options...
! 7396: func_arith $current + 1
! 7397: minor_current=$func_arith_result
! 7398: xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
! 7399: verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
! 7400: ;;
! 7401:
! 7402: freebsd-aout)
! 7403: major=".$current"
! 7404: versuffix=".$current.$revision";
! 7405: ;;
! 7406:
! 7407: freebsd-elf)
! 7408: major=".$current"
! 7409: versuffix=".$current"
! 7410: ;;
! 7411:
! 7412: irix | nonstopux)
! 7413: if test "X$lt_irix_increment" = "Xno"; then
! 7414: func_arith $current - $age
! 7415: else
! 7416: func_arith $current - $age + 1
! 7417: fi
! 7418: major=$func_arith_result
! 7419:
! 7420: case $version_type in
! 7421: nonstopux) verstring_prefix=nonstopux ;;
! 7422: *) verstring_prefix=sgi ;;
! 7423: esac
! 7424: verstring="$verstring_prefix$major.$revision"
! 7425:
! 7426: # Add in all the interfaces that we are compatible with.
! 7427: loop=$revision
! 7428: while test "$loop" -ne 0; do
! 7429: func_arith $revision - $loop
! 7430: iface=$func_arith_result
! 7431: func_arith $loop - 1
! 7432: loop=$func_arith_result
! 7433: verstring="$verstring_prefix$major.$iface:$verstring"
! 7434: done
! 7435:
! 7436: # Before this point, $major must not contain `.'.
! 7437: major=.$major
! 7438: versuffix="$major.$revision"
! 7439: ;;
! 7440:
! 7441: linux)
! 7442: func_arith $current - $age
! 7443: major=.$func_arith_result
! 7444: versuffix="$major.$age.$revision"
! 7445: ;;
! 7446:
! 7447: osf)
! 7448: func_arith $current - $age
! 7449: major=.$func_arith_result
! 7450: versuffix=".$current.$age.$revision"
! 7451: verstring="$current.$age.$revision"
! 7452:
! 7453: # Add in all the interfaces that we are compatible with.
! 7454: loop=$age
! 7455: while test "$loop" -ne 0; do
! 7456: func_arith $current - $loop
! 7457: iface=$func_arith_result
! 7458: func_arith $loop - 1
! 7459: loop=$func_arith_result
! 7460: verstring="$verstring:${iface}.0"
! 7461: done
! 7462:
! 7463: # Make executables depend on our current version.
! 7464: func_append verstring ":${current}.0"
! 7465: ;;
! 7466:
! 7467: qnx)
! 7468: major=".$current"
! 7469: versuffix=".$current"
! 7470: ;;
! 7471:
! 7472: sunos)
! 7473: major=".$current"
! 7474: versuffix=".$current.$revision"
! 7475: ;;
! 7476:
! 7477: windows)
! 7478: # Use '-' rather than '.', since we only want one
! 7479: # extension on DOS 8.3 filesystems.
! 7480: func_arith $current - $age
! 7481: major=$func_arith_result
! 7482: versuffix="-$major"
! 7483: ;;
! 7484:
! 7485: *)
! 7486: func_fatal_configuration "unknown library version type \`$version_type'"
! 7487: ;;
! 7488: esac
! 7489:
! 7490: # Clear the version info if we defaulted, and they specified a release.
! 7491: if test -z "$vinfo" && test -n "$release"; then
! 7492: major=
! 7493: case $version_type in
! 7494: darwin)
! 7495: # we can't check for "0.0" in archive_cmds due to quoting
! 7496: # problems, so we reset it completely
! 7497: verstring=
! 7498: ;;
! 7499: *)
! 7500: verstring="0.0"
! 7501: ;;
! 7502: esac
! 7503: if test "$need_version" = no; then
! 7504: versuffix=
! 7505: else
! 7506: versuffix=".0.0"
! 7507: fi
! 7508: fi
! 7509:
! 7510: # Remove version info from name if versioning should be avoided
! 7511: if test "$avoid_version" = yes && test "$need_version" = no; then
! 7512: major=
! 7513: versuffix=
! 7514: verstring=""
! 7515: fi
! 7516:
! 7517: # Check to see if the archive will have undefined symbols.
! 7518: if test "$allow_undefined" = yes; then
! 7519: if test "$allow_undefined_flag" = unsupported; then
! 7520: func_warning "undefined symbols not allowed in $host shared libraries"
! 7521: build_libtool_libs=no
! 7522: build_old_libs=yes
! 7523: fi
! 7524: else
! 7525: # Don't allow undefined symbols.
! 7526: allow_undefined_flag="$no_undefined_flag"
! 7527: fi
! 7528:
! 7529: fi
! 7530:
! 7531: func_generate_dlsyms "$libname" "$libname" "yes"
! 7532: func_append libobjs " $symfileobj"
! 7533: test "X$libobjs" = "X " && libobjs=
! 7534:
! 7535: if test "$opt_mode" != relink; then
! 7536: # Remove our outputs, but don't remove object files since they
! 7537: # may have been created when compiling PIC objects.
! 7538: removelist=
! 7539: tempremovelist=`$ECHO "$output_objdir/*"`
! 7540: for p in $tempremovelist; do
! 7541: case $p in
! 7542: *.$objext | *.gcno)
! 7543: ;;
! 7544: $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
! 7545: if test "X$precious_files_regex" != "X"; then
! 7546: if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
! 7547: then
! 7548: continue
! 7549: fi
! 7550: fi
! 7551: func_append removelist " $p"
! 7552: ;;
! 7553: *) ;;
! 7554: esac
! 7555: done
! 7556: test -n "$removelist" && \
! 7557: func_show_eval "${RM}r \$removelist"
! 7558: fi
! 7559:
! 7560: # Now set the variables for building old libraries.
! 7561: if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
! 7562: func_append oldlibs " $output_objdir/$libname.$libext"
! 7563:
! 7564: # Transform .lo files to .o files.
! 7565: oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
! 7566: fi
! 7567:
! 7568: # Eliminate all temporary directories.
! 7569: #for path in $notinst_path; do
! 7570: # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
! 7571: # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
! 7572: # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
! 7573: #done
! 7574:
! 7575: if test -n "$xrpath"; then
! 7576: # If the user specified any rpath flags, then add them.
! 7577: temp_xrpath=
! 7578: for libdir in $xrpath; do
! 7579: func_replace_sysroot "$libdir"
! 7580: func_append temp_xrpath " -R$func_replace_sysroot_result"
! 7581: case "$finalize_rpath " in
! 7582: *" $libdir "*) ;;
! 7583: *) func_append finalize_rpath " $libdir" ;;
! 7584: esac
! 7585: done
! 7586: if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
! 7587: dependency_libs="$temp_xrpath $dependency_libs"
! 7588: fi
! 7589: fi
! 7590:
! 7591: # Make sure dlfiles contains only unique files that won't be dlpreopened
! 7592: old_dlfiles="$dlfiles"
! 7593: dlfiles=
! 7594: for lib in $old_dlfiles; do
! 7595: case " $dlprefiles $dlfiles " in
! 7596: *" $lib "*) ;;
! 7597: *) func_append dlfiles " $lib" ;;
! 7598: esac
! 7599: done
! 7600:
! 7601: # Make sure dlprefiles contains only unique files
! 7602: old_dlprefiles="$dlprefiles"
! 7603: dlprefiles=
! 7604: for lib in $old_dlprefiles; do
! 7605: case "$dlprefiles " in
! 7606: *" $lib "*) ;;
! 7607: *) func_append dlprefiles " $lib" ;;
! 7608: esac
! 7609: done
! 7610:
! 7611: if test "$build_libtool_libs" = yes; then
! 7612: if test -n "$rpath"; then
! 7613: case $host in
! 7614: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
! 7615: # these systems don't actually have a c library (as such)!
! 7616: ;;
! 7617: *-*-rhapsody* | *-*-darwin1.[012])
! 7618: # Rhapsody C library is in the System framework
! 7619: func_append deplibs " System.ltframework"
! 7620: ;;
! 7621: *-*-netbsd*)
! 7622: # Don't link with libc until the a.out ld.so is fixed.
! 7623: ;;
! 7624: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 7625: # Do not include libc due to us having libc/libc_r.
! 7626: ;;
! 7627: *-*-sco3.2v5* | *-*-sco5v6*)
! 7628: # Causes problems with __ctype
! 7629: ;;
! 7630: *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
! 7631: # Compiler inserts libc in the correct place for threads to work
! 7632: ;;
! 7633: *)
! 7634: # Add libc to deplibs on all other systems if necessary.
! 7635: if test "$build_libtool_need_lc" = "yes"; then
! 7636: func_append deplibs " -lc"
! 7637: fi
! 7638: ;;
! 7639: esac
! 7640: fi
! 7641:
! 7642: # Transform deplibs into only deplibs that can be linked in shared.
! 7643: name_save=$name
! 7644: libname_save=$libname
! 7645: release_save=$release
! 7646: versuffix_save=$versuffix
! 7647: major_save=$major
! 7648: # I'm not sure if I'm treating the release correctly. I think
! 7649: # release should show up in the -l (ie -lgmp5) so we don't want to
! 7650: # add it in twice. Is that correct?
! 7651: release=""
! 7652: versuffix=""
! 7653: major=""
! 7654: newdeplibs=
! 7655: droppeddeps=no
! 7656: case $deplibs_check_method in
! 7657: pass_all)
! 7658: # Don't check for shared/static. Everything works.
! 7659: # This might be a little naive. We might want to check
! 7660: # whether the library exists or not. But this is on
! 7661: # osf3 & osf4 and I'm not really sure... Just
! 7662: # implementing what was already the behavior.
! 7663: newdeplibs=$deplibs
! 7664: ;;
! 7665: test_compile)
! 7666: # This code stresses the "libraries are programs" paradigm to its
! 7667: # limits. Maybe even breaks it. We compile a program, linking it
! 7668: # against the deplibs as a proxy for the library. Then we can check
! 7669: # whether they linked in statically or dynamically with ldd.
! 7670: $opt_dry_run || $RM conftest.c
! 7671: cat > conftest.c <<EOF
! 7672: int main() { return 0; }
! 7673: EOF
! 7674: $opt_dry_run || $RM conftest
! 7675: if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
! 7676: ldd_output=`ldd conftest`
! 7677: for i in $deplibs; do
! 7678: case $i in
! 7679: -l*)
! 7680: func_stripname -l '' "$i"
! 7681: name=$func_stripname_result
! 7682: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 7683: case " $predeps $postdeps " in
! 7684: *" $i "*)
! 7685: func_append newdeplibs " $i"
! 7686: i=""
! 7687: ;;
! 7688: esac
! 7689: fi
! 7690: if test -n "$i" ; then
! 7691: libname=`eval "\\$ECHO \"$libname_spec\""`
! 7692: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
! 7693: set dummy $deplib_matches; shift
! 7694: deplib_match=$1
! 7695: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
! 7696: func_append newdeplibs " $i"
! 7697: else
! 7698: droppeddeps=yes
! 7699: echo
! 7700: $ECHO "*** Warning: dynamic linker does not accept needed library $i."
! 7701: echo "*** I have the capability to make that library automatically link in when"
! 7702: echo "*** you link to this library. But I can only do this if you have a"
! 7703: echo "*** shared version of the library, which I believe you do not have"
! 7704: echo "*** because a test_compile did reveal that the linker did not use it for"
! 7705: echo "*** its dynamic dependency list that programs get resolved with at runtime."
! 7706: fi
! 7707: fi
! 7708: ;;
! 7709: *)
! 7710: func_append newdeplibs " $i"
! 7711: ;;
! 7712: esac
! 7713: done
! 7714: else
! 7715: # Error occurred in the first compile. Let's try to salvage
! 7716: # the situation: Compile a separate program for each library.
! 7717: for i in $deplibs; do
! 7718: case $i in
! 7719: -l*)
! 7720: func_stripname -l '' "$i"
! 7721: name=$func_stripname_result
! 7722: $opt_dry_run || $RM conftest
! 7723: if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
! 7724: ldd_output=`ldd conftest`
! 7725: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 7726: case " $predeps $postdeps " in
! 7727: *" $i "*)
! 7728: func_append newdeplibs " $i"
! 7729: i=""
! 7730: ;;
! 7731: esac
! 7732: fi
! 7733: if test -n "$i" ; then
! 7734: libname=`eval "\\$ECHO \"$libname_spec\""`
! 7735: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
! 7736: set dummy $deplib_matches; shift
! 7737: deplib_match=$1
! 7738: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
! 7739: func_append newdeplibs " $i"
! 7740: else
! 7741: droppeddeps=yes
! 7742: echo
! 7743: $ECHO "*** Warning: dynamic linker does not accept needed library $i."
! 7744: echo "*** I have the capability to make that library automatically link in when"
! 7745: echo "*** you link to this library. But I can only do this if you have a"
! 7746: echo "*** shared version of the library, which you do not appear to have"
! 7747: echo "*** because a test_compile did reveal that the linker did not use this one"
! 7748: echo "*** as a dynamic dependency that programs can get resolved with at runtime."
! 7749: fi
! 7750: fi
! 7751: else
! 7752: droppeddeps=yes
! 7753: echo
! 7754: $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
! 7755: echo "*** make it link in! You will probably need to install it or some"
! 7756: echo "*** library that it depends on before this library will be fully"
! 7757: echo "*** functional. Installing it before continuing would be even better."
! 7758: fi
! 7759: ;;
! 7760: *)
! 7761: func_append newdeplibs " $i"
! 7762: ;;
! 7763: esac
! 7764: done
! 7765: fi
! 7766: ;;
! 7767: file_magic*)
! 7768: set dummy $deplibs_check_method; shift
! 7769: file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 7770: for a_deplib in $deplibs; do
! 7771: case $a_deplib in
! 7772: -l*)
! 7773: func_stripname -l '' "$a_deplib"
! 7774: name=$func_stripname_result
! 7775: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 7776: case " $predeps $postdeps " in
! 7777: *" $a_deplib "*)
! 7778: func_append newdeplibs " $a_deplib"
! 7779: a_deplib=""
! 7780: ;;
! 7781: esac
! 7782: fi
! 7783: if test -n "$a_deplib" ; then
! 7784: libname=`eval "\\$ECHO \"$libname_spec\""`
! 7785: if test -n "$file_magic_glob"; then
! 7786: libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
! 7787: else
! 7788: libnameglob=$libname
! 7789: fi
! 7790: test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
! 7791: for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
! 7792: if test "$want_nocaseglob" = yes; then
! 7793: shopt -s nocaseglob
! 7794: potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
! 7795: $nocaseglob
! 7796: else
! 7797: potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
! 7798: fi
! 7799: for potent_lib in $potential_libs; do
! 7800: # Follow soft links.
! 7801: if ls -lLd "$potent_lib" 2>/dev/null |
! 7802: $GREP " -> " >/dev/null; then
! 7803: continue
! 7804: fi
! 7805: # The statement above tries to avoid entering an
! 7806: # endless loop below, in case of cyclic links.
! 7807: # We might still enter an endless loop, since a link
! 7808: # loop can be closed while we follow links,
! 7809: # but so what?
! 7810: potlib="$potent_lib"
! 7811: while test -h "$potlib" 2>/dev/null; do
! 7812: potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
! 7813: case $potliblink in
! 7814: [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
! 7815: *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
! 7816: esac
! 7817: done
! 7818: if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
! 7819: $SED -e 10q |
! 7820: $EGREP "$file_magic_regex" > /dev/null; then
! 7821: func_append newdeplibs " $a_deplib"
! 7822: a_deplib=""
! 7823: break 2
! 7824: fi
! 7825: done
! 7826: done
! 7827: fi
! 7828: if test -n "$a_deplib" ; then
! 7829: droppeddeps=yes
! 7830: echo
! 7831: $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
! 7832: echo "*** I have the capability to make that library automatically link in when"
! 7833: echo "*** you link to this library. But I can only do this if you have a"
! 7834: echo "*** shared version of the library, which you do not appear to have"
! 7835: echo "*** because I did check the linker path looking for a file starting"
! 7836: if test -z "$potlib" ; then
! 7837: $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
! 7838: else
! 7839: $ECHO "*** with $libname and none of the candidates passed a file format test"
! 7840: $ECHO "*** using a file magic. Last file checked: $potlib"
! 7841: fi
! 7842: fi
! 7843: ;;
! 7844: *)
! 7845: # Add a -L argument.
! 7846: func_append newdeplibs " $a_deplib"
! 7847: ;;
! 7848: esac
! 7849: done # Gone through all deplibs.
! 7850: ;;
! 7851: match_pattern*)
! 7852: set dummy $deplibs_check_method; shift
! 7853: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 7854: for a_deplib in $deplibs; do
! 7855: case $a_deplib in
! 7856: -l*)
! 7857: func_stripname -l '' "$a_deplib"
! 7858: name=$func_stripname_result
! 7859: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 7860: case " $predeps $postdeps " in
! 7861: *" $a_deplib "*)
! 7862: func_append newdeplibs " $a_deplib"
! 7863: a_deplib=""
! 7864: ;;
! 7865: esac
! 7866: fi
! 7867: if test -n "$a_deplib" ; then
! 7868: libname=`eval "\\$ECHO \"$libname_spec\""`
! 7869: for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
! 7870: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
! 7871: for potent_lib in $potential_libs; do
! 7872: potlib="$potent_lib" # see symlink-check above in file_magic test
! 7873: if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
! 7874: $EGREP "$match_pattern_regex" > /dev/null; then
! 7875: func_append newdeplibs " $a_deplib"
! 7876: a_deplib=""
! 7877: break 2
! 7878: fi
! 7879: done
! 7880: done
! 7881: fi
! 7882: if test -n "$a_deplib" ; then
! 7883: droppeddeps=yes
! 7884: echo
! 7885: $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
! 7886: echo "*** I have the capability to make that library automatically link in when"
! 7887: echo "*** you link to this library. But I can only do this if you have a"
! 7888: echo "*** shared version of the library, which you do not appear to have"
! 7889: echo "*** because I did check the linker path looking for a file starting"
! 7890: if test -z "$potlib" ; then
! 7891: $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
! 7892: else
! 7893: $ECHO "*** with $libname and none of the candidates passed a file format test"
! 7894: $ECHO "*** using a regex pattern. Last file checked: $potlib"
! 7895: fi
! 7896: fi
! 7897: ;;
! 7898: *)
! 7899: # Add a -L argument.
! 7900: func_append newdeplibs " $a_deplib"
! 7901: ;;
! 7902: esac
! 7903: done # Gone through all deplibs.
! 7904: ;;
! 7905: none | unknown | *)
! 7906: newdeplibs=""
! 7907: tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
! 7908: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 7909: for i in $predeps $postdeps ; do
! 7910: # can't use Xsed below, because $i might contain '/'
! 7911: tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
! 7912: done
! 7913: fi
! 7914: case $tmp_deplibs in
! 7915: *[!\ \ ]*)
! 7916: echo
! 7917: if test "X$deplibs_check_method" = "Xnone"; then
! 7918: echo "*** Warning: inter-library dependencies are not supported in this platform."
! 7919: else
! 7920: echo "*** Warning: inter-library dependencies are not known to be supported."
! 7921: fi
! 7922: echo "*** All declared inter-library dependencies are being dropped."
! 7923: droppeddeps=yes
! 7924: ;;
! 7925: esac
! 7926: ;;
! 7927: esac
! 7928: versuffix=$versuffix_save
! 7929: major=$major_save
! 7930: release=$release_save
! 7931: libname=$libname_save
! 7932: name=$name_save
! 7933:
! 7934: case $host in
! 7935: *-*-rhapsody* | *-*-darwin1.[012])
! 7936: # On Rhapsody replace the C library with the System framework
! 7937: newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
! 7938: ;;
! 7939: esac
! 7940:
! 7941: if test "$droppeddeps" = yes; then
! 7942: if test "$module" = yes; then
! 7943: echo
! 7944: echo "*** Warning: libtool could not satisfy all declared inter-library"
! 7945: $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
! 7946: echo "*** a static module, that should work as long as the dlopening"
! 7947: echo "*** application is linked with the -dlopen flag."
! 7948: if test -z "$global_symbol_pipe"; then
! 7949: echo
! 7950: echo "*** However, this would only work if libtool was able to extract symbol"
! 7951: echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
! 7952: echo "*** not find such a program. So, this module is probably useless."
! 7953: echo "*** \`nm' from GNU binutils and a full rebuild may help."
! 7954: fi
! 7955: if test "$build_old_libs" = no; then
! 7956: oldlibs="$output_objdir/$libname.$libext"
! 7957: build_libtool_libs=module
! 7958: build_old_libs=yes
! 7959: else
! 7960: build_libtool_libs=no
! 7961: fi
! 7962: else
! 7963: echo "*** The inter-library dependencies that have been dropped here will be"
! 7964: echo "*** automatically added whenever a program is linked with this library"
! 7965: echo "*** or is declared to -dlopen it."
! 7966:
! 7967: if test "$allow_undefined" = no; then
! 7968: echo
! 7969: echo "*** Since this library must not contain undefined symbols,"
! 7970: echo "*** because either the platform does not support them or"
! 7971: echo "*** it was explicitly requested with -no-undefined,"
! 7972: echo "*** libtool will only create a static version of it."
! 7973: if test "$build_old_libs" = no; then
! 7974: oldlibs="$output_objdir/$libname.$libext"
! 7975: build_libtool_libs=module
! 7976: build_old_libs=yes
! 7977: else
! 7978: build_libtool_libs=no
! 7979: fi
! 7980: fi
! 7981: fi
! 7982: fi
! 7983: # Done checking deplibs!
! 7984: deplibs=$newdeplibs
! 7985: fi
! 7986: # Time to change all our "foo.ltframework" stuff back to "-framework foo"
! 7987: case $host in
! 7988: *-*-darwin*)
! 7989: newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
! 7990: new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
! 7991: deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
! 7992: ;;
! 7993: esac
! 7994:
! 7995: # move library search paths that coincide with paths to not yet
! 7996: # installed libraries to the beginning of the library search list
! 7997: new_libs=
! 7998: for path in $notinst_path; do
! 7999: case " $new_libs " in
! 8000: *" -L$path/$objdir "*) ;;
! 8001: *)
! 8002: case " $deplibs " in
! 8003: *" -L$path/$objdir "*)
! 8004: func_append new_libs " -L$path/$objdir" ;;
! 8005: esac
! 8006: ;;
! 8007: esac
! 8008: done
! 8009: for deplib in $deplibs; do
! 8010: case $deplib in
! 8011: -L*)
! 8012: case " $new_libs " in
! 8013: *" $deplib "*) ;;
! 8014: *) func_append new_libs " $deplib" ;;
! 8015: esac
! 8016: ;;
! 8017: *) func_append new_libs " $deplib" ;;
! 8018: esac
! 8019: done
! 8020: deplibs="$new_libs"
! 8021:
! 8022: # All the library-specific variables (install_libdir is set above).
! 8023: library_names=
! 8024: old_library=
! 8025: dlname=
! 8026:
! 8027: # Test again, we may have decided not to build it any more
! 8028: if test "$build_libtool_libs" = yes; then
! 8029: if test "$hardcode_into_libs" = yes; then
! 8030: # Hardcode the library paths
! 8031: hardcode_libdirs=
! 8032: dep_rpath=
! 8033: rpath="$finalize_rpath"
! 8034: test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
! 8035: for libdir in $rpath; do
! 8036: if test -n "$hardcode_libdir_flag_spec"; then
! 8037: if test -n "$hardcode_libdir_separator"; then
! 8038: func_replace_sysroot "$libdir"
! 8039: libdir=$func_replace_sysroot_result
! 8040: if test -z "$hardcode_libdirs"; then
! 8041: hardcode_libdirs="$libdir"
! 8042: else
! 8043: # Just accumulate the unique libdirs.
! 8044: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 8045: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 8046: ;;
! 8047: *)
! 8048: func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
! 8049: ;;
! 8050: esac
! 8051: fi
! 8052: else
! 8053: eval flag=\"$hardcode_libdir_flag_spec\"
! 8054: func_append dep_rpath " $flag"
! 8055: fi
! 8056: elif test -n "$runpath_var"; then
! 8057: case "$perm_rpath " in
! 8058: *" $libdir "*) ;;
! 8059: *) func_apped perm_rpath " $libdir" ;;
! 8060: esac
! 8061: fi
! 8062: done
! 8063: # Substitute the hardcoded libdirs into the rpath.
! 8064: if test -n "$hardcode_libdir_separator" &&
! 8065: test -n "$hardcode_libdirs"; then
! 8066: libdir="$hardcode_libdirs"
! 8067: if test -n "$hardcode_libdir_flag_spec_ld"; then
! 8068: eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
! 8069: else
! 8070: eval dep_rpath=\"$hardcode_libdir_flag_spec\"
! 8071: fi
! 8072: fi
! 8073: if test -n "$runpath_var" && test -n "$perm_rpath"; then
! 8074: # We should set the runpath_var.
! 8075: rpath=
! 8076: for dir in $perm_rpath; do
! 8077: func_append rpath "$dir:"
! 8078: done
! 8079: eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
! 8080: fi
! 8081: test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
! 8082: fi
! 8083:
! 8084: shlibpath="$finalize_shlibpath"
! 8085: test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
! 8086: if test -n "$shlibpath"; then
! 8087: eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
! 8088: fi
! 8089:
! 8090: # Get the real and link names of the library.
! 8091: eval shared_ext=\"$shrext_cmds\"
! 8092: eval library_names=\"$library_names_spec\"
! 8093: set dummy $library_names
! 8094: shift
! 8095: realname="$1"
! 8096: shift
! 8097:
! 8098: if test -n "$soname_spec"; then
! 8099: eval soname=\"$soname_spec\"
! 8100: else
! 8101: soname="$realname"
! 8102: fi
! 8103: if test -z "$dlname"; then
! 8104: dlname=$soname
! 8105: fi
! 8106:
! 8107: lib="$output_objdir/$realname"
! 8108: linknames=
! 8109: for link
! 8110: do
! 8111: func_append linknames " $link"
! 8112: done
! 8113:
! 8114: # Use standard objects if they are pic
! 8115: test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
! 8116: test "X$libobjs" = "X " && libobjs=
! 8117:
! 8118: delfiles=
! 8119: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 8120: $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
! 8121: export_symbols="$output_objdir/$libname.uexp"
! 8122: func_append delfiles " $export_symbols"
! 8123: fi
! 8124:
! 8125: orig_export_symbols=
! 8126: case $host_os in
! 8127: cygwin* | mingw* | cegcc*)
! 8128: if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
! 8129: # exporting using user supplied symfile
! 8130: if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
! 8131: # and it's NOT already a .def file. Must figure out
! 8132: # which of the given symbols are data symbols and tag
! 8133: # them as such. So, trigger use of export_symbols_cmds.
! 8134: # export_symbols gets reassigned inside the "prepare
! 8135: # the list of exported symbols" if statement, so the
! 8136: # include_expsyms logic still works.
! 8137: orig_export_symbols="$export_symbols"
! 8138: export_symbols=
! 8139: always_export_symbols=yes
! 8140: fi
! 8141: fi
! 8142: ;;
! 8143: esac
! 8144:
! 8145: # Prepare the list of exported symbols
! 8146: if test -z "$export_symbols"; then
! 8147: if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
! 8148: func_verbose "generating symbol list for \`$libname.la'"
! 8149: export_symbols="$output_objdir/$libname.exp"
! 8150: $opt_dry_run || $RM $export_symbols
! 8151: cmds=$export_symbols_cmds
! 8152: save_ifs="$IFS"; IFS='~'
! 8153: for cmd1 in $cmds; do
! 8154: IFS="$save_ifs"
! 8155: # Take the normal branch if the nm_file_list_spec branch
! 8156: # doesn't work or if tool conversion is not needed.
! 8157: case $nm_file_list_spec~$to_tool_file_cmd in
! 8158: *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
! 8159: try_normal_branch=yes
! 8160: eval cmd=\"$cmd1\"
! 8161: func_len " $cmd"
! 8162: len=$func_len_result
! 8163: ;;
! 8164: *)
! 8165: try_normal_branch=no
! 8166: ;;
! 8167: esac
! 8168: if test "$try_normal_branch" = yes \
! 8169: && { test "$len" -lt "$max_cmd_len" \
! 8170: || test "$max_cmd_len" -le -1; }
! 8171: then
! 8172: func_show_eval "$cmd" 'exit $?'
! 8173: skipped_export=false
! 8174: elif test -n "$nm_file_list_spec"; then
! 8175: func_basename "$output"
! 8176: output_la=$func_basename_result
! 8177: save_libobjs=$libobjs
! 8178: save_output=$output
! 8179: output=${output_objdir}/${output_la}.nm
! 8180: func_to_tool_file "$output"
! 8181: libobjs=$nm_file_list_spec$func_to_tool_file_result
! 8182: func_append delfiles " $output"
! 8183: func_verbose "creating $NM input file list: $output"
! 8184: for obj in $save_libobjs; do
! 8185: func_to_tool_file "$obj"
! 8186: $ECHO "$func_to_tool_file_result"
! 8187: done > "$output"
! 8188: eval cmd=\"$cmd1\"
! 8189: func_show_eval "$cmd" 'exit $?'
! 8190: output=$save_output
! 8191: libobjs=$save_libobjs
! 8192: skipped_export=false
! 8193: else
! 8194: # The command line is too long to execute in one step.
! 8195: func_verbose "using reloadable object file for export list..."
! 8196: skipped_export=:
! 8197: # Break out early, otherwise skipped_export may be
! 8198: # set to false by a later but shorter cmd.
! 8199: break
! 8200: fi
! 8201: done
! 8202: IFS="$save_ifs"
! 8203: if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
! 8204: func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
! 8205: func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
! 8206: fi
! 8207: fi
! 8208: fi
! 8209:
! 8210: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 8211: tmp_export_symbols="$export_symbols"
! 8212: test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
! 8213: $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
! 8214: fi
! 8215:
! 8216: if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
! 8217: # The given exports_symbols file has to be filtered, so filter it.
! 8218: func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
! 8219: # FIXME: $output_objdir/$libname.filter potentially contains lots of
! 8220: # 's' commands which not all seds can handle. GNU sed should be fine
! 8221: # though. Also, the filter scales superlinearly with the number of
! 8222: # global variables. join(1) would be nice here, but unfortunately
! 8223: # isn't a blessed tool.
! 8224: $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
! 8225: func_append delfiles " $export_symbols $output_objdir/$libname.filter"
! 8226: export_symbols=$output_objdir/$libname.def
! 8227: $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
! 8228: fi
! 8229:
! 8230: tmp_deplibs=
! 8231: for test_deplib in $deplibs; do
! 8232: case " $convenience " in
! 8233: *" $test_deplib "*) ;;
! 8234: *)
! 8235: func_append tmp_deplibs " $test_deplib"
! 8236: ;;
! 8237: esac
! 8238: done
! 8239: deplibs="$tmp_deplibs"
! 8240:
! 8241: if test -n "$convenience"; then
! 8242: if test -n "$whole_archive_flag_spec" &&
! 8243: test "$compiler_needs_object" = yes &&
! 8244: test -z "$libobjs"; then
! 8245: # extract the archives, so we have objects to list.
! 8246: # TODO: could optimize this to just extract one archive.
! 8247: whole_archive_flag_spec=
! 8248: fi
! 8249: if test -n "$whole_archive_flag_spec"; then
! 8250: save_libobjs=$libobjs
! 8251: eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
! 8252: test "X$libobjs" = "X " && libobjs=
! 8253: else
! 8254: gentop="$output_objdir/${outputname}x"
! 8255: func_append generated " $gentop"
! 8256:
! 8257: func_extract_archives $gentop $convenience
! 8258: func_append libobjs " $func_extract_archives_result"
! 8259: test "X$libobjs" = "X " && libobjs=
! 8260: fi
! 8261: fi
! 8262:
! 8263: if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
! 8264: eval flag=\"$thread_safe_flag_spec\"
! 8265: func_append linker_flags " $flag"
! 8266: fi
! 8267:
! 8268: # Make a backup of the uninstalled library when relinking
! 8269: if test "$opt_mode" = relink; then
! 8270: $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
! 8271: fi
! 8272:
! 8273: # Do each of the archive commands.
! 8274: if test "$module" = yes && test -n "$module_cmds" ; then
! 8275: if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
! 8276: eval test_cmds=\"$module_expsym_cmds\"
! 8277: cmds=$module_expsym_cmds
! 8278: else
! 8279: eval test_cmds=\"$module_cmds\"
! 8280: cmds=$module_cmds
! 8281: fi
! 8282: else
! 8283: if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
! 8284: eval test_cmds=\"$archive_expsym_cmds\"
! 8285: cmds=$archive_expsym_cmds
! 8286: else
! 8287: eval test_cmds=\"$archive_cmds\"
! 8288: cmds=$archive_cmds
! 8289: fi
! 8290: fi
! 8291:
! 8292: if test "X$skipped_export" != "X:" &&
! 8293: func_len " $test_cmds" &&
! 8294: len=$func_len_result &&
! 8295: test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 8296: :
! 8297: else
! 8298: # The command line is too long to link in one step, link piecewise
! 8299: # or, if using GNU ld and skipped_export is not :, use a linker
! 8300: # script.
! 8301:
! 8302: # Save the value of $output and $libobjs because we want to
! 8303: # use them later. If we have whole_archive_flag_spec, we
! 8304: # want to use save_libobjs as it was before
! 8305: # whole_archive_flag_spec was expanded, because we can't
! 8306: # assume the linker understands whole_archive_flag_spec.
! 8307: # This may have to be revisited, in case too many
! 8308: # convenience libraries get linked in and end up exceeding
! 8309: # the spec.
! 8310: if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
! 8311: save_libobjs=$libobjs
! 8312: fi
! 8313: save_output=$output
! 8314: func_basename "$output"
! 8315: output_la=$func_basename_result
! 8316:
! 8317: # Clear the reloadable object creation command queue and
! 8318: # initialize k to one.
! 8319: test_cmds=
! 8320: concat_cmds=
! 8321: objlist=
! 8322: last_robj=
! 8323: k=1
! 8324:
! 8325: if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
! 8326: output=${output_objdir}/${output_la}.lnkscript
! 8327: func_verbose "creating GNU ld script: $output"
! 8328: echo 'INPUT (' > $output
! 8329: for obj in $save_libobjs
! 8330: do
! 8331: func_to_tool_file "$obj"
! 8332: $ECHO "$func_to_tool_file_result" >> $output
! 8333: done
! 8334: echo ')' >> $output
! 8335: func_append delfiles " $output"
! 8336: func_to_tool_file "$output"
! 8337: output=$func_to_tool_file_result
! 8338: elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
! 8339: output=${output_objdir}/${output_la}.lnk
! 8340: func_verbose "creating linker input file list: $output"
! 8341: : > $output
! 8342: set x $save_libobjs
! 8343: shift
! 8344: firstobj=
! 8345: if test "$compiler_needs_object" = yes; then
! 8346: firstobj="$1 "
! 8347: shift
! 8348: fi
! 8349: for obj
! 8350: do
! 8351: func_to_tool_file "$obj"
! 8352: $ECHO "$func_to_tool_file_result" >> $output
! 8353: done
! 8354: func_append delfiles " $output"
! 8355: func_to_tool_file "$output"
! 8356: output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
! 8357: else
! 8358: if test -n "$save_libobjs"; then
! 8359: func_verbose "creating reloadable object files..."
! 8360: output=$output_objdir/$output_la-${k}.$objext
! 8361: eval test_cmds=\"$reload_cmds\"
! 8362: func_len " $test_cmds"
! 8363: len0=$func_len_result
! 8364: len=$len0
! 8365:
! 8366: # Loop over the list of objects to be linked.
! 8367: for obj in $save_libobjs
! 8368: do
! 8369: func_len " $obj"
! 8370: func_arith $len + $func_len_result
! 8371: len=$func_arith_result
! 8372: if test "X$objlist" = X ||
! 8373: test "$len" -lt "$max_cmd_len"; then
! 8374: func_append objlist " $obj"
! 8375: else
! 8376: # The command $test_cmds is almost too long, add a
! 8377: # command to the queue.
! 8378: if test "$k" -eq 1 ; then
! 8379: # The first file doesn't have a previous command to add.
! 8380: reload_objs=$objlist
! 8381: eval concat_cmds=\"$reload_cmds\"
! 8382: else
! 8383: # All subsequent reloadable object files will link in
! 8384: # the last one created.
! 8385: reload_objs="$objlist $last_robj"
! 8386: eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
! 8387: fi
! 8388: last_robj=$output_objdir/$output_la-${k}.$objext
! 8389: func_arith $k + 1
! 8390: k=$func_arith_result
! 8391: output=$output_objdir/$output_la-${k}.$objext
! 8392: objlist=" $obj"
! 8393: func_len " $last_robj"
! 8394: func_arith $len0 + $func_len_result
! 8395: len=$func_arith_result
! 8396: fi
! 8397: done
! 8398: # Handle the remaining objects by creating one last
! 8399: # reloadable object file. All subsequent reloadable object
! 8400: # files will link in the last one created.
! 8401: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 8402: reload_objs="$objlist $last_robj"
! 8403: eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
! 8404: if test -n "$last_robj"; then
! 8405: eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
! 8406: fi
! 8407: func_append delfiles " $output"
! 8408:
! 8409: else
! 8410: output=
! 8411: fi
! 8412:
! 8413: if ${skipped_export-false}; then
! 8414: func_verbose "generating symbol list for \`$libname.la'"
! 8415: export_symbols="$output_objdir/$libname.exp"
! 8416: $opt_dry_run || $RM $export_symbols
! 8417: libobjs=$output
! 8418: # Append the command to create the export file.
! 8419: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 8420: eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
! 8421: if test -n "$last_robj"; then
! 8422: eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
! 8423: fi
! 8424: fi
! 8425:
! 8426: test -n "$save_libobjs" &&
! 8427: func_verbose "creating a temporary reloadable object file: $output"
! 8428:
! 8429: # Loop through the commands generated above and execute them.
! 8430: save_ifs="$IFS"; IFS='~'
! 8431: for cmd in $concat_cmds; do
! 8432: IFS="$save_ifs"
! 8433: $opt_silent || {
! 8434: func_quote_for_expand "$cmd"
! 8435: eval "func_echo $func_quote_for_expand_result"
! 8436: }
! 8437: $opt_dry_run || eval "$cmd" || {
! 8438: lt_exit=$?
! 8439:
! 8440: # Restore the uninstalled library and exit
! 8441: if test "$opt_mode" = relink; then
! 8442: ( cd "$output_objdir" && \
! 8443: $RM "${realname}T" && \
! 8444: $MV "${realname}U" "$realname" )
! 8445: fi
! 8446:
! 8447: exit $lt_exit
! 8448: }
! 8449: done
! 8450: IFS="$save_ifs"
! 8451:
! 8452: if test -n "$export_symbols_regex" && ${skipped_export-false}; then
! 8453: func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
! 8454: func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
! 8455: fi
! 8456: fi
! 8457:
! 8458: if ${skipped_export-false}; then
! 8459: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 8460: tmp_export_symbols="$export_symbols"
! 8461: test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
! 8462: $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
! 8463: fi
! 8464:
! 8465: if test -n "$orig_export_symbols"; then
! 8466: # The given exports_symbols file has to be filtered, so filter it.
! 8467: func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
! 8468: # FIXME: $output_objdir/$libname.filter potentially contains lots of
! 8469: # 's' commands which not all seds can handle. GNU sed should be fine
! 8470: # though. Also, the filter scales superlinearly with the number of
! 8471: # global variables. join(1) would be nice here, but unfortunately
! 8472: # isn't a blessed tool.
! 8473: $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
! 8474: func_append delfiles " $export_symbols $output_objdir/$libname.filter"
! 8475: export_symbols=$output_objdir/$libname.def
! 8476: $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
! 8477: fi
! 8478: fi
! 8479:
! 8480: libobjs=$output
! 8481: # Restore the value of output.
! 8482: output=$save_output
! 8483:
! 8484: if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
! 8485: eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
! 8486: test "X$libobjs" = "X " && libobjs=
! 8487: fi
! 8488: # Expand the library linking commands again to reset the
! 8489: # value of $libobjs for piecewise linking.
! 8490:
! 8491: # Do each of the archive commands.
! 8492: if test "$module" = yes && test -n "$module_cmds" ; then
! 8493: if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
! 8494: cmds=$module_expsym_cmds
! 8495: else
! 8496: cmds=$module_cmds
! 8497: fi
! 8498: else
! 8499: if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
! 8500: cmds=$archive_expsym_cmds
! 8501: else
! 8502: cmds=$archive_cmds
! 8503: fi
! 8504: fi
! 8505: fi
! 8506:
! 8507: if test -n "$delfiles"; then
! 8508: # Append the command to remove temporary files to $cmds.
! 8509: eval cmds=\"\$cmds~\$RM $delfiles\"
! 8510: fi
! 8511:
! 8512: # Add any objects from preloaded convenience libraries
! 8513: if test -n "$dlprefiles"; then
! 8514: gentop="$output_objdir/${outputname}x"
! 8515: func_append generated " $gentop"
! 8516:
! 8517: func_extract_archives $gentop $dlprefiles
! 8518: func_append libobjs " $func_extract_archives_result"
! 8519: test "X$libobjs" = "X " && libobjs=
! 8520: fi
! 8521:
! 8522: save_ifs="$IFS"; IFS='~'
! 8523: for cmd in $cmds; do
! 8524: IFS="$save_ifs"
! 8525: eval cmd=\"$cmd\"
! 8526: $opt_silent || {
! 8527: func_quote_for_expand "$cmd"
! 8528: eval "func_echo $func_quote_for_expand_result"
! 8529: }
! 8530: $opt_dry_run || eval "$cmd" || {
! 8531: lt_exit=$?
! 8532:
! 8533: # Restore the uninstalled library and exit
! 8534: if test "$opt_mode" = relink; then
! 8535: ( cd "$output_objdir" && \
! 8536: $RM "${realname}T" && \
! 8537: $MV "${realname}U" "$realname" )
! 8538: fi
! 8539:
! 8540: exit $lt_exit
! 8541: }
! 8542: done
! 8543: IFS="$save_ifs"
! 8544:
! 8545: # Restore the uninstalled library and exit
! 8546: if test "$opt_mode" = relink; then
! 8547: $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
! 8548:
! 8549: if test -n "$convenience"; then
! 8550: if test -z "$whole_archive_flag_spec"; then
! 8551: func_show_eval '${RM}r "$gentop"'
! 8552: fi
! 8553: fi
! 8554:
! 8555: exit $EXIT_SUCCESS
! 8556: fi
! 8557:
! 8558: # Create links to the real library.
! 8559: for linkname in $linknames; do
! 8560: if test "$realname" != "$linkname"; then
! 8561: func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
! 8562: fi
! 8563: done
! 8564:
! 8565: # If -module or -export-dynamic was specified, set the dlname.
! 8566: if test "$module" = yes || test "$export_dynamic" = yes; then
! 8567: # On all known operating systems, these are identical.
! 8568: dlname="$soname"
! 8569: fi
! 8570: fi
! 8571: ;;
! 8572:
! 8573: obj)
! 8574: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 8575: func_warning "\`-dlopen' is ignored for objects"
! 8576: fi
! 8577:
! 8578: case " $deplibs" in
! 8579: *\ -l* | *\ -L*)
! 8580: func_warning "\`-l' and \`-L' are ignored for objects" ;;
! 8581: esac
! 8582:
! 8583: test -n "$rpath" && \
! 8584: func_warning "\`-rpath' is ignored for objects"
! 8585:
! 8586: test -n "$xrpath" && \
! 8587: func_warning "\`-R' is ignored for objects"
! 8588:
! 8589: test -n "$vinfo" && \
! 8590: func_warning "\`-version-info' is ignored for objects"
! 8591:
! 8592: test -n "$release" && \
! 8593: func_warning "\`-release' is ignored for objects"
! 8594:
! 8595: case $output in
! 8596: *.lo)
! 8597: test -n "$objs$old_deplibs" && \
! 8598: func_fatal_error "cannot build library object \`$output' from non-libtool objects"
! 8599:
! 8600: libobj=$output
! 8601: func_lo2o "$libobj"
! 8602: obj=$func_lo2o_result
! 8603: ;;
! 8604: *)
! 8605: libobj=
! 8606: obj="$output"
! 8607: ;;
! 8608: esac
! 8609:
! 8610: # Delete the old objects.
! 8611: $opt_dry_run || $RM $obj $libobj
! 8612:
! 8613: # Objects from convenience libraries. This assumes
! 8614: # single-version convenience libraries. Whenever we create
! 8615: # different ones for PIC/non-PIC, this we'll have to duplicate
! 8616: # the extraction.
! 8617: reload_conv_objs=
! 8618: gentop=
! 8619: # reload_cmds runs $LD directly, so let us get rid of
! 8620: # -Wl from whole_archive_flag_spec and hope we can get by with
! 8621: # turning comma into space..
! 8622: wl=
! 8623:
! 8624: if test -n "$convenience"; then
! 8625: if test -n "$whole_archive_flag_spec"; then
! 8626: eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
! 8627: reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
! 8628: else
! 8629: gentop="$output_objdir/${obj}x"
! 8630: func_append generated " $gentop"
! 8631:
! 8632: func_extract_archives $gentop $convenience
! 8633: reload_conv_objs="$reload_objs $func_extract_archives_result"
! 8634: fi
! 8635: fi
! 8636:
! 8637: # If we're not building shared, we need to use non_pic_objs
! 8638: test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
! 8639:
! 8640: # Create the old-style object.
! 8641: reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
! 8642:
! 8643: output="$obj"
! 8644: func_execute_cmds "$reload_cmds" 'exit $?'
! 8645:
! 8646: # Exit if we aren't doing a library object file.
! 8647: if test -z "$libobj"; then
! 8648: if test -n "$gentop"; then
! 8649: func_show_eval '${RM}r "$gentop"'
! 8650: fi
! 8651:
! 8652: exit $EXIT_SUCCESS
! 8653: fi
! 8654:
! 8655: if test "$build_libtool_libs" != yes; then
! 8656: if test -n "$gentop"; then
! 8657: func_show_eval '${RM}r "$gentop"'
! 8658: fi
! 8659:
! 8660: # Create an invalid libtool object if no PIC, so that we don't
! 8661: # accidentally link it into a program.
! 8662: # $show "echo timestamp > $libobj"
! 8663: # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
! 8664: exit $EXIT_SUCCESS
! 8665: fi
! 8666:
! 8667: if test -n "$pic_flag" || test "$pic_mode" != default; then
! 8668: # Only do commands if we really have different PIC objects.
! 8669: reload_objs="$libobjs $reload_conv_objs"
! 8670: output="$libobj"
! 8671: func_execute_cmds "$reload_cmds" 'exit $?'
! 8672: fi
! 8673:
! 8674: if test -n "$gentop"; then
! 8675: func_show_eval '${RM}r "$gentop"'
! 8676: fi
! 8677:
! 8678: exit $EXIT_SUCCESS
! 8679: ;;
! 8680:
! 8681: prog)
! 8682: case $host in
! 8683: *cygwin*) func_stripname '' '.exe' "$output"
! 8684: output=$func_stripname_result.exe;;
! 8685: esac
! 8686: test -n "$vinfo" && \
! 8687: func_warning "\`-version-info' is ignored for programs"
! 8688:
! 8689: test -n "$release" && \
! 8690: func_warning "\`-release' is ignored for programs"
! 8691:
! 8692: test "$preload" = yes \
! 8693: && test "$dlopen_support" = unknown \
! 8694: && test "$dlopen_self" = unknown \
! 8695: && test "$dlopen_self_static" = unknown && \
! 8696: func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
! 8697:
! 8698: case $host in
! 8699: *-*-rhapsody* | *-*-darwin1.[012])
! 8700: # On Rhapsody replace the C library is the System framework
! 8701: compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
! 8702: finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
! 8703: ;;
! 8704: esac
! 8705:
! 8706: case $host in
! 8707: *-*-darwin*)
! 8708: # Don't allow lazy linking, it breaks C++ global constructors
! 8709: # But is supposedly fixed on 10.4 or later (yay!).
! 8710: if test "$tagname" = CXX ; then
! 8711: case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
! 8712: 10.[0123])
! 8713: func_append compile_command " ${wl}-bind_at_load"
! 8714: func_append finalize_command " ${wl}-bind_at_load"
! 8715: ;;
! 8716: esac
! 8717: fi
! 8718: # Time to change all our "foo.ltframework" stuff back to "-framework foo"
! 8719: compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
! 8720: finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
! 8721: ;;
! 8722: esac
! 8723:
! 8724:
! 8725: # move library search paths that coincide with paths to not yet
! 8726: # installed libraries to the beginning of the library search list
! 8727: new_libs=
! 8728: for path in $notinst_path; do
! 8729: case " $new_libs " in
! 8730: *" -L$path/$objdir "*) ;;
! 8731: *)
! 8732: case " $compile_deplibs " in
! 8733: *" -L$path/$objdir "*)
! 8734: func_append new_libs " -L$path/$objdir" ;;
! 8735: esac
! 8736: ;;
! 8737: esac
! 8738: done
! 8739: for deplib in $compile_deplibs; do
! 8740: case $deplib in
! 8741: -L*)
! 8742: case " $new_libs " in
! 8743: *" $deplib "*) ;;
! 8744: *) func_append new_libs " $deplib" ;;
! 8745: esac
! 8746: ;;
! 8747: *) func_append new_libs " $deplib" ;;
! 8748: esac
! 8749: done
! 8750: compile_deplibs="$new_libs"
! 8751:
! 8752:
! 8753: func_append compile_command " $compile_deplibs"
! 8754: func_append finalize_command " $finalize_deplibs"
! 8755:
! 8756: if test -n "$rpath$xrpath"; then
! 8757: # If the user specified any rpath flags, then add them.
! 8758: for libdir in $rpath $xrpath; do
! 8759: # This is the magic to use -rpath.
! 8760: case "$finalize_rpath " in
! 8761: *" $libdir "*) ;;
! 8762: *) func_append finalize_rpath " $libdir" ;;
! 8763: esac
! 8764: done
! 8765: fi
! 8766:
! 8767: # Now hardcode the library paths
! 8768: rpath=
! 8769: hardcode_libdirs=
! 8770: for libdir in $compile_rpath $finalize_rpath; do
! 8771: if test -n "$hardcode_libdir_flag_spec"; then
! 8772: if test -n "$hardcode_libdir_separator"; then
! 8773: if test -z "$hardcode_libdirs"; then
! 8774: hardcode_libdirs="$libdir"
! 8775: else
! 8776: # Just accumulate the unique libdirs.
! 8777: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 8778: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 8779: ;;
! 8780: *)
! 8781: func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
! 8782: ;;
! 8783: esac
! 8784: fi
! 8785: else
! 8786: eval flag=\"$hardcode_libdir_flag_spec\"
! 8787: func_append rpath " $flag"
! 8788: fi
! 8789: elif test -n "$runpath_var"; then
! 8790: case "$perm_rpath " in
! 8791: *" $libdir "*) ;;
! 8792: *) func_append perm_rpath " $libdir" ;;
! 8793: esac
! 8794: fi
! 8795: case $host in
! 8796: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
! 8797: testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
! 8798: case :$dllsearchpath: in
! 8799: *":$libdir:"*) ;;
! 8800: ::) dllsearchpath=$libdir;;
! 8801: *) func_append dllsearchpath ":$libdir";;
! 8802: esac
! 8803: case :$dllsearchpath: in
! 8804: *":$testbindir:"*) ;;
! 8805: ::) dllsearchpath=$testbindir;;
! 8806: *) func_append dllsearchpath ":$testbindir";;
! 8807: esac
! 8808: ;;
! 8809: esac
! 8810: done
! 8811: # Substitute the hardcoded libdirs into the rpath.
! 8812: if test -n "$hardcode_libdir_separator" &&
! 8813: test -n "$hardcode_libdirs"; then
! 8814: libdir="$hardcode_libdirs"
! 8815: eval rpath=\" $hardcode_libdir_flag_spec\"
! 8816: fi
! 8817: compile_rpath="$rpath"
! 8818:
! 8819: rpath=
! 8820: hardcode_libdirs=
! 8821: for libdir in $finalize_rpath; do
! 8822: if test -n "$hardcode_libdir_flag_spec"; then
! 8823: if test -n "$hardcode_libdir_separator"; then
! 8824: if test -z "$hardcode_libdirs"; then
! 8825: hardcode_libdirs="$libdir"
! 8826: else
! 8827: # Just accumulate the unique libdirs.
! 8828: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 8829: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 8830: ;;
! 8831: *)
! 8832: func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
! 8833: ;;
! 8834: esac
! 8835: fi
! 8836: else
! 8837: eval flag=\"$hardcode_libdir_flag_spec\"
! 8838: func_append rpath " $flag"
! 8839: fi
! 8840: elif test -n "$runpath_var"; then
! 8841: case "$finalize_perm_rpath " in
! 8842: *" $libdir "*) ;;
! 8843: *) func_append finalize_perm_rpath " $libdir" ;;
! 8844: esac
! 8845: fi
! 8846: done
! 8847: # Substitute the hardcoded libdirs into the rpath.
! 8848: if test -n "$hardcode_libdir_separator" &&
! 8849: test -n "$hardcode_libdirs"; then
! 8850: libdir="$hardcode_libdirs"
! 8851: eval rpath=\" $hardcode_libdir_flag_spec\"
! 8852: fi
! 8853: finalize_rpath="$rpath"
! 8854:
! 8855: if test -n "$libobjs" && test "$build_old_libs" = yes; then
! 8856: # Transform all the library objects into standard objects.
! 8857: compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
! 8858: finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
! 8859: fi
! 8860:
! 8861: func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
! 8862:
! 8863: # template prelinking step
! 8864: if test -n "$prelink_cmds"; then
! 8865: func_execute_cmds "$prelink_cmds" 'exit $?'
! 8866: fi
! 8867:
! 8868: wrappers_required=yes
! 8869: case $host in
! 8870: *cegcc* | *mingw32ce*)
! 8871: # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
! 8872: wrappers_required=no
! 8873: ;;
! 8874: *cygwin* | *mingw* )
! 8875: if test "$build_libtool_libs" != yes; then
! 8876: wrappers_required=no
! 8877: fi
! 8878: ;;
! 8879: *)
! 8880: if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
! 8881: wrappers_required=no
! 8882: fi
! 8883: ;;
! 8884: esac
! 8885: if test "$wrappers_required" = no; then
! 8886: # Replace the output file specification.
! 8887: compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
! 8888: link_command="$compile_command$compile_rpath"
! 8889:
! 8890: # We have no uninstalled library dependencies, so finalize right now.
! 8891: exit_status=0
! 8892: func_show_eval "$link_command" 'exit_status=$?'
! 8893:
! 8894: if test -n "$postlink_cmds"; then
! 8895: func_to_tool_file "$output"
! 8896: postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
! 8897: func_execute_cmds "$postlink_cmds" 'exit $?'
! 8898: fi
! 8899:
! 8900: # Delete the generated files.
! 8901: if test -f "$output_objdir/${outputname}S.${objext}"; then
! 8902: func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
! 8903: fi
! 8904:
! 8905: exit $exit_status
! 8906: fi
! 8907:
! 8908: if test -n "$compile_shlibpath$finalize_shlibpath"; then
! 8909: compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
! 8910: fi
! 8911: if test -n "$finalize_shlibpath"; then
! 8912: finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
! 8913: fi
! 8914:
! 8915: compile_var=
! 8916: finalize_var=
! 8917: if test -n "$runpath_var"; then
! 8918: if test -n "$perm_rpath"; then
! 8919: # We should set the runpath_var.
! 8920: rpath=
! 8921: for dir in $perm_rpath; do
! 8922: func_append rpath "$dir:"
! 8923: done
! 8924: compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
! 8925: fi
! 8926: if test -n "$finalize_perm_rpath"; then
! 8927: # We should set the runpath_var.
! 8928: rpath=
! 8929: for dir in $finalize_perm_rpath; do
! 8930: func_append rpath "$dir:"
! 8931: done
! 8932: finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
! 8933: fi
! 8934: fi
! 8935:
! 8936: if test "$no_install" = yes; then
! 8937: # We don't need to create a wrapper script.
! 8938: link_command="$compile_var$compile_command$compile_rpath"
! 8939: # Replace the output file specification.
! 8940: link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
! 8941: # Delete the old output file.
! 8942: $opt_dry_run || $RM $output
! 8943: # Link the executable and exit
! 8944: func_show_eval "$link_command" 'exit $?'
! 8945:
! 8946: if test -n "$postlink_cmds"; then
! 8947: func_to_tool_file "$output"
! 8948: postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
! 8949: func_execute_cmds "$postlink_cmds" 'exit $?'
! 8950: fi
! 8951:
! 8952: exit $EXIT_SUCCESS
! 8953: fi
! 8954:
! 8955: if test "$hardcode_action" = relink; then
! 8956: # Fast installation is not supported
! 8957: link_command="$compile_var$compile_command$compile_rpath"
! 8958: relink_command="$finalize_var$finalize_command$finalize_rpath"
! 8959:
! 8960: func_warning "this platform does not like uninstalled shared libraries"
! 8961: func_warning "\`$output' will be relinked during installation"
! 8962: else
! 8963: if test "$fast_install" != no; then
! 8964: link_command="$finalize_var$compile_command$finalize_rpath"
! 8965: if test "$fast_install" = yes; then
! 8966: relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
! 8967: else
! 8968: # fast_install is set to needless
! 8969: relink_command=
! 8970: fi
! 8971: else
! 8972: link_command="$compile_var$compile_command$compile_rpath"
! 8973: relink_command="$finalize_var$finalize_command$finalize_rpath"
! 8974: fi
! 8975: fi
! 8976:
! 8977: # Replace the output file specification.
! 8978: link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
! 8979:
! 8980: # Delete the old output files.
! 8981: $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
! 8982:
! 8983: func_show_eval "$link_command" 'exit $?'
! 8984:
! 8985: if test -n "$postlink_cmds"; then
! 8986: func_to_tool_file "$output_objdir/$outputname"
! 8987: postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
! 8988: func_execute_cmds "$postlink_cmds" 'exit $?'
! 8989: fi
! 8990:
! 8991: # Now create the wrapper script.
! 8992: func_verbose "creating $output"
! 8993:
! 8994: # Quote the relink command for shipping.
! 8995: if test -n "$relink_command"; then
! 8996: # Preserve any variables that may affect compiler behavior
! 8997: for var in $variables_saved_for_relink; do
! 8998: if eval test -z \"\${$var+set}\"; then
! 8999: relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
! 9000: elif eval var_value=\$$var; test -z "$var_value"; then
! 9001: relink_command="$var=; export $var; $relink_command"
! 9002: else
! 9003: func_quote_for_eval "$var_value"
! 9004: relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
! 9005: fi
! 9006: done
! 9007: relink_command="(cd `pwd`; $relink_command)"
! 9008: relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
! 9009: fi
! 9010:
! 9011: # Only actually do things if not in dry run mode.
! 9012: $opt_dry_run || {
! 9013: # win32 will think the script is a binary if it has
! 9014: # a .exe suffix, so we strip it off here.
! 9015: case $output in
! 9016: *.exe) func_stripname '' '.exe' "$output"
! 9017: output=$func_stripname_result ;;
! 9018: esac
! 9019: # test for cygwin because mv fails w/o .exe extensions
! 9020: case $host in
! 9021: *cygwin*)
! 9022: exeext=.exe
! 9023: func_stripname '' '.exe' "$outputname"
! 9024: outputname=$func_stripname_result ;;
! 9025: *) exeext= ;;
! 9026: esac
! 9027: case $host in
! 9028: *cygwin* | *mingw* )
! 9029: func_dirname_and_basename "$output" "" "."
! 9030: output_name=$func_basename_result
! 9031: output_path=$func_dirname_result
! 9032: cwrappersource="$output_path/$objdir/lt-$output_name.c"
! 9033: cwrapper="$output_path/$output_name.exe"
! 9034: $RM $cwrappersource $cwrapper
! 9035: trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
! 9036:
! 9037: func_emit_cwrapperexe_src > $cwrappersource
! 9038:
! 9039: # The wrapper executable is built using the $host compiler,
! 9040: # because it contains $host paths and files. If cross-
! 9041: # compiling, it, like the target executable, must be
! 9042: # executed on the $host or under an emulation environment.
! 9043: $opt_dry_run || {
! 9044: $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
! 9045: $STRIP $cwrapper
! 9046: }
! 9047:
! 9048: # Now, create the wrapper script for func_source use:
! 9049: func_ltwrapper_scriptname $cwrapper
! 9050: $RM $func_ltwrapper_scriptname_result
! 9051: trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
! 9052: $opt_dry_run || {
! 9053: # note: this script will not be executed, so do not chmod.
! 9054: if test "x$build" = "x$host" ; then
! 9055: $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
! 9056: else
! 9057: func_emit_wrapper no > $func_ltwrapper_scriptname_result
! 9058: fi
! 9059: }
! 9060: ;;
! 9061: * )
! 9062: $RM $output
! 9063: trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
! 9064:
! 9065: func_emit_wrapper no > $output
! 9066: chmod +x $output
! 9067: ;;
! 9068: esac
! 9069: }
! 9070: exit $EXIT_SUCCESS
! 9071: ;;
! 9072: esac
! 9073:
! 9074: # See if we need to build an old-fashioned archive.
! 9075: for oldlib in $oldlibs; do
! 9076:
! 9077: if test "$build_libtool_libs" = convenience; then
! 9078: oldobjs="$libobjs_save $symfileobj"
! 9079: addlibs="$convenience"
! 9080: build_libtool_libs=no
! 9081: else
! 9082: if test "$build_libtool_libs" = module; then
! 9083: oldobjs="$libobjs_save"
! 9084: build_libtool_libs=no
! 9085: else
! 9086: oldobjs="$old_deplibs $non_pic_objects"
! 9087: if test "$preload" = yes && test -f "$symfileobj"; then
! 9088: func_append oldobjs " $symfileobj"
! 9089: fi
! 9090: fi
! 9091: addlibs="$old_convenience"
! 9092: fi
! 9093:
! 9094: if test -n "$addlibs"; then
! 9095: gentop="$output_objdir/${outputname}x"
! 9096: func_append generated " $gentop"
! 9097:
! 9098: func_extract_archives $gentop $addlibs
! 9099: func_append oldobjs " $func_extract_archives_result"
! 9100: fi
! 9101:
! 9102: # Do each command in the archive commands.
! 9103: if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
! 9104: cmds=$old_archive_from_new_cmds
! 9105: else
! 9106:
! 9107: # Add any objects from preloaded convenience libraries
! 9108: if test -n "$dlprefiles"; then
! 9109: gentop="$output_objdir/${outputname}x"
! 9110: func_append generated " $gentop"
! 9111:
! 9112: func_extract_archives $gentop $dlprefiles
! 9113: func_append oldobjs " $func_extract_archives_result"
! 9114: fi
! 9115:
! 9116: # POSIX demands no paths to be encoded in archives. We have
! 9117: # to avoid creating archives with duplicate basenames if we
! 9118: # might have to extract them afterwards, e.g., when creating a
! 9119: # static archive out of a convenience library, or when linking
! 9120: # the entirety of a libtool archive into another (currently
! 9121: # not supported by libtool).
! 9122: if (for obj in $oldobjs
! 9123: do
! 9124: func_basename "$obj"
! 9125: $ECHO "$func_basename_result"
! 9126: done | sort | sort -uc >/dev/null 2>&1); then
! 9127: :
! 9128: else
! 9129: echo "copying selected object files to avoid basename conflicts..."
! 9130: gentop="$output_objdir/${outputname}x"
! 9131: func_append generated " $gentop"
! 9132: func_mkdir_p "$gentop"
! 9133: save_oldobjs=$oldobjs
! 9134: oldobjs=
! 9135: counter=1
! 9136: for obj in $save_oldobjs
! 9137: do
! 9138: func_basename "$obj"
! 9139: objbase="$func_basename_result"
! 9140: case " $oldobjs " in
! 9141: " ") oldobjs=$obj ;;
! 9142: *[\ /]"$objbase "*)
! 9143: while :; do
! 9144: # Make sure we don't pick an alternate name that also
! 9145: # overlaps.
! 9146: newobj=lt$counter-$objbase
! 9147: func_arith $counter + 1
! 9148: counter=$func_arith_result
! 9149: case " $oldobjs " in
! 9150: *[\ /]"$newobj "*) ;;
! 9151: *) if test ! -f "$gentop/$newobj"; then break; fi ;;
! 9152: esac
! 9153: done
! 9154: func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
! 9155: func_append oldobjs " $gentop/$newobj"
! 9156: ;;
! 9157: *) func_append oldobjs " $obj" ;;
! 9158: esac
! 9159: done
! 9160: fi
! 9161: eval cmds=\"$old_archive_cmds\"
! 9162:
! 9163: func_len " $cmds"
! 9164: len=$func_len_result
! 9165: if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 9166: cmds=$old_archive_cmds
! 9167: elif test -n "$archiver_list_spec"; then
! 9168: func_verbose "using command file archive linking..."
! 9169: for obj in $oldobjs
! 9170: do
! 9171: func_to_tool_file "$obj"
! 9172: $ECHO "$func_to_tool_file_result"
! 9173: done > $output_objdir/$libname.libcmd
! 9174: func_to_tool_file "$output_objdir/$libname.libcmd"
! 9175: oldobjs=" $archiver_list_spec$func_to_tool_file_result"
! 9176: cmds=$old_archive_cmds
! 9177: else
! 9178: # the command line is too long to link in one step, link in parts
! 9179: func_verbose "using piecewise archive linking..."
! 9180: save_RANLIB=$RANLIB
! 9181: RANLIB=:
! 9182: objlist=
! 9183: concat_cmds=
! 9184: save_oldobjs=$oldobjs
! 9185: oldobjs=
! 9186: # Is there a better way of finding the last object in the list?
! 9187: for obj in $save_oldobjs
! 9188: do
! 9189: last_oldobj=$obj
! 9190: done
! 9191: eval test_cmds=\"$old_archive_cmds\"
! 9192: func_len " $test_cmds"
! 9193: len0=$func_len_result
! 9194: len=$len0
! 9195: for obj in $save_oldobjs
! 9196: do
! 9197: func_len " $obj"
! 9198: func_arith $len + $func_len_result
! 9199: len=$func_arith_result
! 9200: func_append objlist " $obj"
! 9201: if test "$len" -lt "$max_cmd_len"; then
! 9202: :
! 9203: else
! 9204: # the above command should be used before it gets too long
! 9205: oldobjs=$objlist
! 9206: if test "$obj" = "$last_oldobj" ; then
! 9207: RANLIB=$save_RANLIB
! 9208: fi
! 9209: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 9210: eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
! 9211: objlist=
! 9212: len=$len0
! 9213: fi
! 9214: done
! 9215: RANLIB=$save_RANLIB
! 9216: oldobjs=$objlist
! 9217: if test "X$oldobjs" = "X" ; then
! 9218: eval cmds=\"\$concat_cmds\"
! 9219: else
! 9220: eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
! 9221: fi
! 9222: fi
! 9223: fi
! 9224: func_execute_cmds "$cmds" 'exit $?'
! 9225: done
! 9226:
! 9227: test -n "$generated" && \
! 9228: func_show_eval "${RM}r$generated"
! 9229:
! 9230: # Now create the libtool archive.
! 9231: case $output in
! 9232: *.la)
! 9233: old_library=
! 9234: test "$build_old_libs" = yes && old_library="$libname.$libext"
! 9235: func_verbose "creating $output"
! 9236:
! 9237: # Preserve any variables that may affect compiler behavior
! 9238: for var in $variables_saved_for_relink; do
! 9239: if eval test -z \"\${$var+set}\"; then
! 9240: relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
! 9241: elif eval var_value=\$$var; test -z "$var_value"; then
! 9242: relink_command="$var=; export $var; $relink_command"
! 9243: else
! 9244: func_quote_for_eval "$var_value"
! 9245: relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
! 9246: fi
! 9247: done
! 9248: # Quote the link command for shipping.
! 9249: relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
! 9250: relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
! 9251: if test "$hardcode_automatic" = yes ; then
! 9252: relink_command=
! 9253: fi
! 9254:
! 9255: # Only create the output if not a dry run.
! 9256: $opt_dry_run || {
! 9257: for installed in no yes; do
! 9258: if test "$installed" = yes; then
! 9259: if test -z "$install_libdir"; then
! 9260: break
! 9261: fi
! 9262: output="$output_objdir/$outputname"i
! 9263: # Replace all uninstalled libtool libraries with the installed ones
! 9264: newdependency_libs=
! 9265: for deplib in $dependency_libs; do
! 9266: case $deplib in
! 9267: *.la)
! 9268: func_basename "$deplib"
! 9269: name="$func_basename_result"
! 9270: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
! 9271: test -z "$libdir" && \
! 9272: func_fatal_error "\`$deplib' is not a valid libtool archive"
! 9273: func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
! 9274: ;;
! 9275: -L*)
! 9276: func_stripname -L '' "$deplib"
! 9277: func_replace_sysroot "$func_stripname_result"
! 9278: func_append newdependency_libs " -L$func_replace_sysroot_result"
! 9279: ;;
! 9280: -R*)
! 9281: func_stripname -R '' "$deplib"
! 9282: func_replace_sysroot "$func_stripname_result"
! 9283: func_append newdependency_libs " -R$func_replace_sysroot_result"
! 9284: ;;
! 9285: *) func_append newdependency_libs " $deplib" ;;
! 9286: esac
! 9287: done
! 9288: dependency_libs="$newdependency_libs"
! 9289: newdlfiles=
! 9290:
! 9291: for lib in $dlfiles; do
! 9292: case $lib in
! 9293: *.la)
! 9294: func_basename "$lib"
! 9295: name="$func_basename_result"
! 9296: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
! 9297: test -z "$libdir" && \
! 9298: func_fatal_error "\`$lib' is not a valid libtool archive"
! 9299: func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
! 9300: ;;
! 9301: *) func_append newdlfiles " $lib" ;;
! 9302: esac
! 9303: done
! 9304: dlfiles="$newdlfiles"
! 9305: newdlprefiles=
! 9306: for lib in $dlprefiles; do
! 9307: case $lib in
! 9308: *.la)
! 9309: # Only pass preopened files to the pseudo-archive (for
! 9310: # eventual linking with the app. that links it) if we
! 9311: # didn't already link the preopened objects directly into
! 9312: # the library:
! 9313: func_basename "$lib"
! 9314: name="$func_basename_result"
! 9315: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
! 9316: test -z "$libdir" && \
! 9317: func_fatal_error "\`$lib' is not a valid libtool archive"
! 9318: func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
! 9319: ;;
! 9320: esac
! 9321: done
! 9322: dlprefiles="$newdlprefiles"
! 9323: else
! 9324: newdlfiles=
! 9325: for lib in $dlfiles; do
! 9326: case $lib in
! 9327: [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
! 9328: *) abs=`pwd`"/$lib" ;;
! 9329: esac
! 9330: func_append newdlfiles " $abs"
! 9331: done
! 9332: dlfiles="$newdlfiles"
! 9333: newdlprefiles=
! 9334: for lib in $dlprefiles; do
! 9335: case $lib in
! 9336: [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
! 9337: *) abs=`pwd`"/$lib" ;;
! 9338: esac
! 9339: func_append newdlprefiles " $abs"
! 9340: done
! 9341: dlprefiles="$newdlprefiles"
! 9342: fi
! 9343: $RM $output
! 9344: # place dlname in correct position for cygwin
! 9345: # In fact, it would be nice if we could use this code for all target
! 9346: # systems that can't hard-code library paths into their executables
! 9347: # and that have no shared library path variable independent of PATH,
! 9348: # but it turns out we can't easily determine that from inspecting
! 9349: # libtool variables, so we have to hard-code the OSs to which it
! 9350: # applies here; at the moment, that means platforms that use the PE
! 9351: # object format with DLL files. See the long comment at the top of
! 9352: # tests/bindir.at for full details.
! 9353: tdlname=$dlname
! 9354: case $host,$output,$installed,$module,$dlname in
! 9355: *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
! 9356: # If a -bindir argument was supplied, place the dll there.
! 9357: if test "x$bindir" != x ;
! 9358: then
! 9359: func_relative_path "$install_libdir" "$bindir"
! 9360: tdlname=$func_relative_path_result$dlname
! 9361: else
! 9362: # Otherwise fall back on heuristic.
! 9363: tdlname=../bin/$dlname
! 9364: fi
! 9365: ;;
! 9366: esac
! 9367: $ECHO > $output "\
! 9368: # $outputname - a libtool library file
! 9369: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 9370: #
! 9371: # Please DO NOT delete this file!
! 9372: # It is necessary for linking the library.
! 9373:
! 9374: # The name that we can dlopen(3).
! 9375: dlname='$tdlname'
! 9376:
! 9377: # Names of this library.
! 9378: library_names='$library_names'
! 9379:
! 9380: # The name of the static archive.
! 9381: old_library='$old_library'
! 9382:
! 9383: # Linker flags that can not go in dependency_libs.
! 9384: inherited_linker_flags='$new_inherited_linker_flags'
! 9385:
! 9386: # Libraries that this one depends upon.
! 9387: dependency_libs='$dependency_libs'
! 9388:
! 9389: # Names of additional weak libraries provided by this library
! 9390: weak_library_names='$weak_libs'
! 9391:
! 9392: # Version information for $libname.
! 9393: current=$current
! 9394: age=$age
! 9395: revision=$revision
! 9396:
! 9397: # Is this an already installed library?
! 9398: installed=$installed
! 9399:
! 9400: # Should we warn about portability when linking against -modules?
! 9401: shouldnotlink=$module
! 9402:
! 9403: # Files to dlopen/dlpreopen
! 9404: dlopen='$dlfiles'
! 9405: dlpreopen='$dlprefiles'
! 9406:
! 9407: # Directory that this library needs to be installed in:
! 9408: libdir='$install_libdir'"
! 9409: if test "$installed" = no && test "$need_relink" = yes; then
! 9410: $ECHO >> $output "\
! 9411: relink_command=\"$relink_command\""
! 9412: fi
! 9413: done
! 9414: }
! 9415:
! 9416: # Do a symbolic link so that the libtool archive can be found in
! 9417: # LD_LIBRARY_PATH before the program is installed.
! 9418: func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
! 9419: ;;
! 9420: esac
! 9421: exit $EXIT_SUCCESS
! 9422: }
! 9423:
! 9424: { test "$opt_mode" = link || test "$opt_mode" = relink; } &&
! 9425: func_mode_link ${1+"$@"}
! 9426:
! 9427:
! 9428: # func_mode_uninstall arg...
! 9429: func_mode_uninstall ()
! 9430: {
! 9431: $opt_debug
! 9432: RM="$nonopt"
! 9433: files=
! 9434: rmforce=
! 9435: exit_status=0
! 9436:
! 9437: # This variable tells wrapper scripts just to set variables rather
! 9438: # than running their programs.
! 9439: libtool_install_magic="$magic"
! 9440:
! 9441: for arg
! 9442: do
! 9443: case $arg in
! 9444: -f) func_append RM " $arg"; rmforce=yes ;;
! 9445: -*) func_append RM " $arg" ;;
! 9446: *) func_append files " $arg" ;;
! 9447: esac
! 9448: done
! 9449:
! 9450: test -z "$RM" && \
! 9451: func_fatal_help "you must specify an RM program"
! 9452:
! 9453: rmdirs=
! 9454:
! 9455: for file in $files; do
! 9456: func_dirname "$file" "" "."
! 9457: dir="$func_dirname_result"
! 9458: if test "X$dir" = X.; then
! 9459: odir="$objdir"
! 9460: else
! 9461: odir="$dir/$objdir"
! 9462: fi
! 9463: func_basename "$file"
! 9464: name="$func_basename_result"
! 9465: test "$opt_mode" = uninstall && odir="$dir"
! 9466:
! 9467: # Remember odir for removal later, being careful to avoid duplicates
! 9468: if test "$opt_mode" = clean; then
! 9469: case " $rmdirs " in
! 9470: *" $odir "*) ;;
! 9471: *) func_append rmdirs " $odir" ;;
! 9472: esac
! 9473: fi
! 9474:
! 9475: # Don't error if the file doesn't exist and rm -f was used.
! 9476: if { test -L "$file"; } >/dev/null 2>&1 ||
! 9477: { test -h "$file"; } >/dev/null 2>&1 ||
! 9478: test -f "$file"; then
! 9479: :
! 9480: elif test -d "$file"; then
! 9481: exit_status=1
! 9482: continue
! 9483: elif test "$rmforce" = yes; then
! 9484: continue
! 9485: fi
! 9486:
! 9487: rmfiles="$file"
! 9488:
! 9489: case $name in
! 9490: *.la)
! 9491: # Possibly a libtool archive, so verify it.
! 9492: if func_lalib_p "$file"; then
! 9493: func_source $dir/$name
! 9494:
! 9495: # Delete the libtool libraries and symlinks.
! 9496: for n in $library_names; do
! 9497: func_append rmfiles " $odir/$n"
! 9498: done
! 9499: test -n "$old_library" && func_append rmfiles " $odir/$old_library"
! 9500:
! 9501: case "$opt_mode" in
! 9502: clean)
! 9503: case " $library_names " in
! 9504: *" $dlname "*) ;;
! 9505: *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
! 9506: esac
! 9507: test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
! 9508: ;;
! 9509: uninstall)
! 9510: if test -n "$library_names"; then
! 9511: # Do each command in the postuninstall commands.
! 9512: func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
! 9513: fi
! 9514:
! 9515: if test -n "$old_library"; then
! 9516: # Do each command in the old_postuninstall commands.
! 9517: func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
! 9518: fi
! 9519: # FIXME: should reinstall the best remaining shared library.
! 9520: ;;
! 9521: esac
! 9522: fi
! 9523: ;;
! 9524:
! 9525: *.lo)
! 9526: # Possibly a libtool object, so verify it.
! 9527: if func_lalib_p "$file"; then
! 9528:
! 9529: # Read the .lo file
! 9530: func_source $dir/$name
! 9531:
! 9532: # Add PIC object to the list of files to remove.
! 9533: if test -n "$pic_object" &&
! 9534: test "$pic_object" != none; then
! 9535: func_append rmfiles " $dir/$pic_object"
! 9536: fi
! 9537:
! 9538: # Add non-PIC object to the list of files to remove.
! 9539: if test -n "$non_pic_object" &&
! 9540: test "$non_pic_object" != none; then
! 9541: func_append rmfiles " $dir/$non_pic_object"
! 9542: fi
! 9543: fi
! 9544: ;;
! 9545:
! 9546: *)
! 9547: if test "$opt_mode" = clean ; then
! 9548: noexename=$name
! 9549: case $file in
! 9550: *.exe)
! 9551: func_stripname '' '.exe' "$file"
! 9552: file=$func_stripname_result
! 9553: func_stripname '' '.exe' "$name"
! 9554: noexename=$func_stripname_result
! 9555: # $file with .exe has already been added to rmfiles,
! 9556: # add $file without .exe
! 9557: func_append rmfiles " $file"
! 9558: ;;
! 9559: esac
! 9560: # Do a test to see if this is a libtool program.
! 9561: if func_ltwrapper_p "$file"; then
! 9562: if func_ltwrapper_executable_p "$file"; then
! 9563: func_ltwrapper_scriptname "$file"
! 9564: relink_command=
! 9565: func_source $func_ltwrapper_scriptname_result
! 9566: func_append rmfiles " $func_ltwrapper_scriptname_result"
! 9567: else
! 9568: relink_command=
! 9569: func_source $dir/$noexename
! 9570: fi
! 9571:
! 9572: # note $name still contains .exe if it was in $file originally
! 9573: # as does the version of $file that was added into $rmfiles
! 9574: func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
! 9575: if test "$fast_install" = yes && test -n "$relink_command"; then
! 9576: func_append rmfiles " $odir/lt-$name"
! 9577: fi
! 9578: if test "X$noexename" != "X$name" ; then
! 9579: func_append rmfiles " $odir/lt-${noexename}.c"
! 9580: fi
! 9581: fi
! 9582: fi
! 9583: ;;
! 9584: esac
! 9585: func_show_eval "$RM $rmfiles" 'exit_status=1'
! 9586: done
! 9587:
! 9588: # Try to remove the ${objdir}s in the directories where we deleted files
! 9589: for dir in $rmdirs; do
! 9590: if test -d "$dir"; then
! 9591: func_show_eval "rmdir $dir >/dev/null 2>&1"
! 9592: fi
! 9593: done
! 9594:
! 9595: exit $exit_status
! 9596: }
! 9597:
! 9598: { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
! 9599: func_mode_uninstall ${1+"$@"}
! 9600:
! 9601: test -z "$opt_mode" && {
! 9602: help="$generic_help"
! 9603: func_fatal_help "you must specify a MODE"
! 9604: }
! 9605:
! 9606: test -z "$exec_cmd" && \
! 9607: func_fatal_help "invalid operation mode \`$opt_mode'"
! 9608:
! 9609: if test -n "$exec_cmd"; then
! 9610: eval exec "$exec_cmd"
! 9611: exit $EXIT_FAILURE
! 9612: fi
! 9613:
! 9614: exit $exit_status
! 9615:
! 9616:
! 9617: # The TAGs below are defined such that we never get into a situation
! 9618: # in which we disable both kinds of libraries. Given conflicting
! 9619: # choices, we go for a static library, that is the most portable,
! 9620: # since we can't tell whether shared libraries were disabled because
! 9621: # the user asked for that or because the platform doesn't support
! 9622: # them. This is particularly important on AIX, because we don't
! 9623: # support having both static and shared libraries enabled at the same
! 9624: # time on that platform, so we default to a shared-only configuration.
! 9625: # If a disable-shared tag is given, we'll fallback to a static-only
! 9626: # configuration. But we'll never go from static-only to shared-only.
! 9627:
! 9628: # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
! 9629: build_libtool_libs=no
! 9630: build_old_libs=yes
! 9631: # ### END LIBTOOL TAG CONFIG: disable-shared
! 9632:
! 9633: # ### BEGIN LIBTOOL TAG CONFIG: disable-static
! 9634: build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
! 9635: # ### END LIBTOOL TAG CONFIG: disable-static
! 9636:
! 9637: # Local Variables:
! 9638: # mode:shell-script
! 9639: # sh-indentation:2
! 9640: # End:
! 9641: # vi:sw=2
! 9642:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ltmain.sh CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / libnet