Annotation of embedaddon/libxml2/doc/Makefile.in, revision 1.1.1.3
1.1.1.3 ! misho 1: # Makefile.in generated by automake 1.11.6 from Makefile.am.
1.1 misho 2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
1.1.1.3 ! misho 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
! 6: # Foundation, Inc.
1.1 misho 7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
1.1.1.3 ! misho 18: am__make_dryrun = \
! 19: { \
! 20: am__dry=no; \
! 21: case $$MAKEFLAGS in \
! 22: *\\[\ \ ]*) \
! 23: echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
! 24: | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
! 25: *) \
! 26: for am__flg in $$MAKEFLAGS; do \
! 27: case $$am__flg in \
! 28: *=*|--*) ;; \
! 29: *n*) am__dry=yes; break;; \
! 30: esac; \
! 31: done;; \
! 32: esac; \
! 33: test $$am__dry = yes; \
! 34: }
1.1 misho 35: pkgdatadir = $(datadir)/@PACKAGE@
36: pkgincludedir = $(includedir)/@PACKAGE@
37: pkglibdir = $(libdir)/@PACKAGE@
38: pkglibexecdir = $(libexecdir)/@PACKAGE@
39: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
40: install_sh_DATA = $(install_sh) -c -m 644
41: install_sh_PROGRAM = $(install_sh) -c
42: install_sh_SCRIPT = $(install_sh) -c
43: INSTALL_HEADER = $(INSTALL_DATA)
44: transform = $(program_transform_name)
45: NORMAL_INSTALL = :
46: PRE_INSTALL = :
47: POST_INSTALL = :
48: NORMAL_UNINSTALL = :
49: PRE_UNINSTALL = :
50: POST_UNINSTALL = :
51: build_triplet = @build@
52: host_triplet = @host@
53: subdir = doc
54: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
55: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
56: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
57: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
58: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
59: $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
60: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
61: $(ACLOCAL_M4)
62: mkinstalldirs = $(install_sh) -d
63: CONFIG_HEADER = $(top_builddir)/config.h
64: CONFIG_CLEAN_FILES =
65: CONFIG_CLEAN_VPATH_FILES =
1.1.1.3 ! misho 66: AM_V_GEN = $(am__v_GEN_@AM_V@)
! 67: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
1.1.1.2 misho 68: am__v_GEN_0 = @echo " GEN " $@;
1.1.1.3 ! misho 69: AM_V_at = $(am__v_at_@AM_V@)
! 70: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
1.1.1.2 misho 71: am__v_at_0 = @
1.1 misho 72: SOURCES =
73: DIST_SOURCES =
74: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
75: html-recursive info-recursive install-data-recursive \
76: install-dvi-recursive install-exec-recursive \
77: install-html-recursive install-info-recursive \
78: install-pdf-recursive install-ps-recursive install-recursive \
79: installcheck-recursive installdirs-recursive pdf-recursive \
80: ps-recursive uninstall-recursive
1.1.1.3 ! misho 81: am__can_run_installinfo = \
! 82: case $$AM_UPDATE_INFO_DIR in \
! 83: n|no|NO) false;; \
! 84: *) (install-info --version) >/dev/null 2>&1;; \
! 85: esac
1.1 misho 86: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
87: am__vpath_adj = case $$p in \
88: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
89: *) f=$$p;; \
90: esac;
91: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
92: am__install_max = 40
93: am__nobase_strip_setup = \
94: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
95: am__nobase_strip = \
96: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
97: am__nobase_list = $(am__nobase_strip_setup); \
98: for p in $$list; do echo "$$p $$p"; done | \
99: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
100: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
101: if (++n[$$2] == $(am__install_max)) \
102: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
103: END { for (dir in files) print dir, files[dir] }'
104: am__base_list = \
105: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
106: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
1.1.1.3 ! misho 107: am__uninstall_files_from_dir = { \
! 108: test -z "$$files" \
! 109: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
! 110: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
! 111: $(am__cd) "$$dir" && rm -f $$files; }; \
! 112: }
1.1 misho 113: man1dir = $(mandir)/man1
114: am__installdirs = "$(DESTDIR)$(man1dir)"
115: NROFF = nroff
116: MANS = $(man_MANS)
117: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
118: distclean-recursive maintainer-clean-recursive
119: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
120: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
121: distdir
122: ETAGS = etags
123: CTAGS = ctags
124: DIST_SUBDIRS = $(SUBDIRS)
125: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
126: am__relativize = \
127: dir0=`pwd`; \
128: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
129: sed_rest='s,^[^/]*/*,,'; \
130: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
131: sed_butlast='s,/*[^/]*$$,,'; \
132: while test -n "$$dir1"; do \
133: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
134: if test "$$first" != "."; then \
135: if test "$$first" = ".."; then \
136: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
137: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
138: else \
139: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
140: if test "$$first2" = "$$first"; then \
141: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
142: else \
143: dir2="../$$dir2"; \
144: fi; \
145: dir0="$$dir0"/"$$first"; \
146: fi; \
147: fi; \
148: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
149: done; \
150: reldir="$$dir2"
151: ACLOCAL = @ACLOCAL@
152: AMTAR = @AMTAR@
1.1.1.2 misho 153: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
1.1 misho 154: AR = @AR@
155: AUTOCONF = @AUTOCONF@
156: AUTOHEADER = @AUTOHEADER@
157: AUTOMAKE = @AUTOMAKE@
158: AWK = @AWK@
159: BASE_THREAD_LIBS = @BASE_THREAD_LIBS@
160: C14N_OBJ = @C14N_OBJ@
161: CATALOG_OBJ = @CATALOG_OBJ@
162: CC = @CC@
163: CCDEPMODE = @CCDEPMODE@
164: CFLAGS = @CFLAGS@
165: CPP = @CPP@
166: CPPFLAGS = @CPPFLAGS@
167: CYGPATH_W = @CYGPATH_W@
168: CYGWIN_EXTRA_LDFLAGS = @CYGWIN_EXTRA_LDFLAGS@
169: CYGWIN_EXTRA_PYTHON_LIBADD = @CYGWIN_EXTRA_PYTHON_LIBADD@
170: DEBUG_OBJ = @DEBUG_OBJ@
171: DEFS = @DEFS@
172: DEPDIR = @DEPDIR@
173: DLLTOOL = @DLLTOOL@
174: DOCB_OBJ = @DOCB_OBJ@
175: DSYMUTIL = @DSYMUTIL@
176: DUMPBIN = @DUMPBIN@
177: ECHO_C = @ECHO_C@
178: ECHO_N = @ECHO_N@
179: ECHO_T = @ECHO_T@
180: EGREP = @EGREP@
181: EXEEXT = @EXEEXT@
182: FGREP = @FGREP@
183: FTP_OBJ = @FTP_OBJ@
184: GREP = @GREP@
185: HAVE_ISINF = @HAVE_ISINF@
186: HAVE_ISNAN = @HAVE_ISNAN@
187: HTML_DIR = @HTML_DIR@
188: HTML_OBJ = @HTML_OBJ@
189: HTTP_OBJ = @HTTP_OBJ@
190: ICONV_LIBS = @ICONV_LIBS@
1.1.1.3 ! misho 191: ICU_LIBS = @ICU_LIBS@
1.1 misho 192: INSTALL = @INSTALL@
193: INSTALL_DATA = @INSTALL_DATA@
194: INSTALL_PROGRAM = @INSTALL_PROGRAM@
195: INSTALL_SCRIPT = @INSTALL_SCRIPT@
196: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
197: LD = @LD@
198: LDFLAGS = @LDFLAGS@
199: LIBOBJS = @LIBOBJS@
200: LIBS = @LIBS@
201: LIBTOOL = @LIBTOOL@
202: LIBXML_MAJOR_VERSION = @LIBXML_MAJOR_VERSION@
203: LIBXML_MICRO_VERSION = @LIBXML_MICRO_VERSION@
204: LIBXML_MINOR_VERSION = @LIBXML_MINOR_VERSION@
205: LIBXML_VERSION = @LIBXML_VERSION@
206: LIBXML_VERSION_EXTRA = @LIBXML_VERSION_EXTRA@
207: LIBXML_VERSION_INFO = @LIBXML_VERSION_INFO@
208: LIBXML_VERSION_NUMBER = @LIBXML_VERSION_NUMBER@
209: LIPO = @LIPO@
210: LN_S = @LN_S@
211: LTLIBOBJS = @LTLIBOBJS@
1.1.1.2 misho 212: LZMA_CFLAGS = @LZMA_CFLAGS@
213: LZMA_LIBS = @LZMA_LIBS@
1.1 misho 214: MAKEINFO = @MAKEINFO@
1.1.1.2 misho 215: MANIFEST_TOOL = @MANIFEST_TOOL@
1.1 misho 216: MKDIR_P = @MKDIR_P@
217: MODULE_EXTENSION = @MODULE_EXTENSION@
218: MODULE_PLATFORM_LIBS = @MODULE_PLATFORM_LIBS@
219: MV = @MV@
220: M_LIBS = @M_LIBS@
221: NM = @NM@
222: NMEDIT = @NMEDIT@
223: OBJDUMP = @OBJDUMP@
224: OBJEXT = @OBJEXT@
225: OTOOL = @OTOOL@
226: OTOOL64 = @OTOOL64@
227: PACKAGE = @PACKAGE@
228: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
229: PACKAGE_NAME = @PACKAGE_NAME@
230: PACKAGE_STRING = @PACKAGE_STRING@
231: PACKAGE_TARNAME = @PACKAGE_TARNAME@
232: PACKAGE_URL = @PACKAGE_URL@
233: PACKAGE_VERSION = @PACKAGE_VERSION@
234: PATH_SEPARATOR = @PATH_SEPARATOR@
235: PERL = @PERL@
236: PYTHON = @PYTHON@
237: PYTHON_INCLUDES = @PYTHON_INCLUDES@
238: PYTHON_LIBS = @PYTHON_LIBS@
239: PYTHON_SITE_PACKAGES = @PYTHON_SITE_PACKAGES@
240: PYTHON_SUBDIR = @PYTHON_SUBDIR@
241: PYTHON_TESTS = @PYTHON_TESTS@
242: PYTHON_VERSION = @PYTHON_VERSION@
243: RANLIB = @RANLIB@
244: RDL_LIBS = @RDL_LIBS@
245: READER_TEST = @READER_TEST@
246: RELDATE = @RELDATE@
247: SED = @SED@
248: SET_MAKE = @SET_MAKE@
249: SHELL = @SHELL@
250: STATIC_BINARIES = @STATIC_BINARIES@
251: STRIP = @STRIP@
252: TAR = @TAR@
253: TEST_C14N = @TEST_C14N@
254: TEST_CATALOG = @TEST_CATALOG@
255: TEST_DEBUG = @TEST_DEBUG@
256: TEST_HTML = @TEST_HTML@
257: TEST_MODULES = @TEST_MODULES@
258: TEST_PATTERN = @TEST_PATTERN@
259: TEST_PHTML = @TEST_PHTML@
260: TEST_PUSH = @TEST_PUSH@
261: TEST_REGEXPS = @TEST_REGEXPS@
262: TEST_SAX = @TEST_SAX@
263: TEST_SCHEMAS = @TEST_SCHEMAS@
264: TEST_SCHEMATRON = @TEST_SCHEMATRON@
265: TEST_THREADS = @TEST_THREADS@
266: TEST_VALID = @TEST_VALID@
267: TEST_VTIME = @TEST_VTIME@
268: TEST_XINCLUDE = @TEST_XINCLUDE@
269: TEST_XPATH = @TEST_XPATH@
270: TEST_XPTR = @TEST_XPTR@
271: THREAD_CFLAGS = @THREAD_CFLAGS@
272: THREAD_LIBS = @THREAD_LIBS@
273: VERSION = @VERSION@
274: VERSION_SCRIPT_FLAGS = @VERSION_SCRIPT_FLAGS@
275: WGET = @WGET@
276: WIN32_EXTRA_LDFLAGS = @WIN32_EXTRA_LDFLAGS@
277: WIN32_EXTRA_LIBADD = @WIN32_EXTRA_LIBADD@
278: WIN32_EXTRA_PYTHON_LIBADD = @WIN32_EXTRA_PYTHON_LIBADD@
279: WITH_C14N = @WITH_C14N@
280: WITH_CATALOG = @WITH_CATALOG@
281: WITH_DEBUG = @WITH_DEBUG@
282: WITH_DOCB = @WITH_DOCB@
283: WITH_FTP = @WITH_FTP@
284: WITH_HTML = @WITH_HTML@
285: WITH_HTTP = @WITH_HTTP@
286: WITH_ICONV = @WITH_ICONV@
287: WITH_ICU = @WITH_ICU@
288: WITH_ISO8859X = @WITH_ISO8859X@
289: WITH_LEGACY = @WITH_LEGACY@
1.1.1.2 misho 290: WITH_LZMA = @WITH_LZMA@
1.1 misho 291: WITH_MEM_DEBUG = @WITH_MEM_DEBUG@
292: WITH_MODULES = @WITH_MODULES@
293: WITH_OUTPUT = @WITH_OUTPUT@
294: WITH_PATTERN = @WITH_PATTERN@
295: WITH_PUSH = @WITH_PUSH@
296: WITH_READER = @WITH_READER@
297: WITH_REGEXPS = @WITH_REGEXPS@
298: WITH_RUN_DEBUG = @WITH_RUN_DEBUG@
299: WITH_SAX1 = @WITH_SAX1@
300: WITH_SCHEMAS = @WITH_SCHEMAS@
301: WITH_SCHEMATRON = @WITH_SCHEMATRON@
302: WITH_THREADS = @WITH_THREADS@
1.1.1.3 ! misho 303: WITH_THREAD_ALLOC = @WITH_THREAD_ALLOC@
1.1 misho 304: WITH_TREE = @WITH_TREE@
305: WITH_TRIO = @WITH_TRIO@
306: WITH_VALID = @WITH_VALID@
307: WITH_WRITER = @WITH_WRITER@
308: WITH_XINCLUDE = @WITH_XINCLUDE@
309: WITH_XPATH = @WITH_XPATH@
310: WITH_XPTR = @WITH_XPTR@
311: WITH_ZLIB = @WITH_ZLIB@
312: XINCLUDE_OBJ = @XINCLUDE_OBJ@
313: XMLLINT = @XMLLINT@
314: XML_CFLAGS = @XML_CFLAGS@
315: XML_INCLUDEDIR = @XML_INCLUDEDIR@
316: XML_LIBDIR = @XML_LIBDIR@
317: XML_LIBS = @XML_LIBS@
318: XML_LIBTOOLLIBS = @XML_LIBTOOLLIBS@
319: XPATH_OBJ = @XPATH_OBJ@
320: XPTR_OBJ = @XPTR_OBJ@
321: XSLTPROC = @XSLTPROC@
322: Z_CFLAGS = @Z_CFLAGS@
323: Z_LIBS = @Z_LIBS@
324: abs_builddir = @abs_builddir@
325: abs_srcdir = @abs_srcdir@
326: abs_top_builddir = @abs_top_builddir@
327: abs_top_srcdir = @abs_top_srcdir@
1.1.1.2 misho 328: ac_ct_AR = @ac_ct_AR@
1.1 misho 329: ac_ct_CC = @ac_ct_CC@
330: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
331: am__include = @am__include@
332: am__leading_dot = @am__leading_dot@
333: am__quote = @am__quote@
334: am__tar = @am__tar@
335: am__untar = @am__untar@
336: bindir = @bindir@
337: build = @build@
338: build_alias = @build_alias@
339: build_cpu = @build_cpu@
340: build_os = @build_os@
341: build_vendor = @build_vendor@
342: builddir = @builddir@
343: datadir = @datadir@
344: datarootdir = @datarootdir@
345: docdir = @docdir@
346: dvidir = @dvidir@
347: exec_prefix = @exec_prefix@
348: host = @host@
349: host_alias = @host_alias@
350: host_cpu = @host_cpu@
351: host_os = @host_os@
352: host_vendor = @host_vendor@
353: htmldir = @htmldir@
354: includedir = @includedir@
355: infodir = @infodir@
356: install_sh = @install_sh@
357: libdir = @libdir@
358: libexecdir = @libexecdir@
359: localedir = @localedir@
360: localstatedir = @localstatedir@
361: mandir = @mandir@
362: mkdir_p = @mkdir_p@
363: oldincludedir = @oldincludedir@
364: pdfdir = @pdfdir@
365: prefix = @prefix@
366: program_transform_name = @program_transform_name@
367: psdir = @psdir@
368: pythondir = @pythondir@
369: sbindir = @sbindir@
370: sharedstatedir = @sharedstatedir@
371: srcdir = @srcdir@
372: sysconfdir = @sysconfdir@
373: target_alias = @target_alias@
374: top_build_prefix = @top_build_prefix@
375: top_builddir = @top_builddir@
376: top_srcdir = @top_srcdir@
1.1.1.3 ! misho 377: SUBDIRS = . devhelp examples
1.1 misho 378:
379: # The top-level SGML file.
380: DOC_MAIN_XML_FILE = gnome-xml.xml
381:
382: # The directory containing the source code (if it contains documentation).
383: DOC_SOURCE_DIR = ..
384:
385: # A file in win32 depends upon one of the doc files
386: WIN32_DIR = $(top_srcdir)/win32
387: PAGES = architecture.html bugs.html contribs.html docs.html DOM.html \
388: downloads.html entities.html example.html help.html index.html \
389: interface.html intro.html library.html namespaces.html news.html \
390: tree.html xmldtd.html XMLinfo.html XSLT.html
391:
392: APIPAGES = APIconstructors.html APIfiles.html APIfunctions.html \
393: APIsymbols.html APIchunk0.html
394:
1.1.1.3 ! misho 395: @REBUILD_DOCS_TRUE@EXTRA_DIST_wc = xmlcatalog_man.xml $(wildcard tutorial/*.html) \
! 396: @REBUILD_DOCS_TRUE@ $(wildcard tutorial/*.c) $(wildcard tutorial/*.pdf) \
! 397: @REBUILD_DOCS_TRUE@ $(wildcard tutorial/images/*.png) \
! 398: @REBUILD_DOCS_TRUE@ $(wildcard tutorial/images/callouts/*.png) $(wildcard API*.html) \
! 399: @REBUILD_DOCS_TRUE@ $(wildcard *.1) $(wildcard *.xsl) $(wildcard *.html) \
! 400: @REBUILD_DOCS_TRUE@ $(wildcard *.gif) w3c.png $(wildcard html/*.html) \
! 401: @REBUILD_DOCS_TRUE@ $(wildcard html/*.png) libxml2-api.xml index.py search.php \
! 402: @REBUILD_DOCS_TRUE@ apibuild.py libxml2.xsa xmllint.xml xmlcatalog_man.xml \
! 403: @REBUILD_DOCS_TRUE@ README.docs symbols.xml
! 404:
! 405:
! 406: # Expanded form of EXTRA_DIST_wc
! 407: #
! 408: EXTRA_DIST = \
! 409: APIchunk0.html \
! 410: APIchunk1.html \
! 411: APIchunk2.html \
! 412: APIchunk3.html \
! 413: APIchunk4.html \
! 414: APIchunk5.html \
! 415: APIchunk6.html \
! 416: APIchunk7.html \
! 417: APIchunk8.html \
! 418: APIchunk9.html \
! 419: APIchunk10.html \
! 420: APIchunk11.html \
! 421: APIchunk12.html \
! 422: APIchunk13.html \
! 423: APIchunk14.html \
! 424: APIchunk15.html \
! 425: APIchunk16.html \
! 426: APIchunk17.html \
! 427: APIchunk18.html \
! 428: APIchunk19.html \
! 429: APIchunk20.html \
! 430: APIchunk21.html \
! 431: APIchunk22.html \
! 432: APIchunk23.html \
! 433: APIchunk24.html \
! 434: APIchunk25.html \
! 435: APIchunk26.html \
! 436: APIchunk27.html \
! 437: APIchunk28.html \
! 438: APIchunk29.html \
! 439: APIconstructors.html \
! 440: APIfiles.html \
! 441: APIfunctions.html \
! 442: APIsymbols.html \
! 443: ChangeLog.xsl \
! 444: DOM.gif \
! 445: DOM.html \
! 446: FAQ.html \
! 447: Libxml2-Logo-180x168.gif \
! 448: Libxml2-Logo-90x34.gif \
! 449: README.docs \
! 450: XMLinfo.html \
! 451: XSLT.html \
! 452: api.xsl \
! 453: apibuild.py \
! 454: architecture.html \
! 455: bugs.html \
! 456: catalog.gif \
! 457: catalog.html \
! 458: checkapisym.xsl \
! 459: contribs.html \
! 460: docs.html \
! 461: downloads.html \
! 462: elfgcchack.xsl \
! 463: encoding.html \
! 464: entities.html \
! 465: example.html \
! 466: guidelines.html \
! 467: help.html \
! 468: html/book1.html \
! 469: html/home.png \
! 470: html/index.html \
! 471: html/left.png \
! 472: html/libxml-DOCBparser.html \
! 473: html/libxml-HTMLparser.html \
! 474: html/libxml-HTMLtree.html \
! 475: html/libxml-SAX.html \
! 476: html/libxml-SAX2.html \
! 477: html/libxml-c14n.html \
! 478: html/libxml-catalog.html \
! 479: html/libxml-chvalid.html \
! 480: html/libxml-debugXML.html \
! 481: html/libxml-dict.html \
! 482: html/libxml-encoding.html \
! 483: html/libxml-entities.html \
! 484: html/libxml-globals.html \
! 485: html/libxml-hash.html \
! 486: html/libxml-lib.html \
! 487: html/libxml-list.html \
! 488: html/libxml-nanoftp.html \
! 489: html/libxml-nanohttp.html \
! 490: html/libxml-parser.html \
! 491: html/libxml-parserInternals.html \
! 492: html/libxml-pattern.html \
! 493: html/libxml-relaxng.html \
! 494: html/libxml-schemasInternals.html \
! 495: html/libxml-schematron.html \
! 496: html/libxml-threads.html \
! 497: html/libxml-tree.html \
! 498: html/libxml-uri.html \
! 499: html/libxml-valid.html \
! 500: html/libxml-xinclude.html \
! 501: html/libxml-xlink.html \
! 502: html/libxml-xmlIO.html \
! 503: html/libxml-xmlautomata.html \
! 504: html/libxml-xmlerror.html \
! 505: html/libxml-xmlexports.html \
! 506: html/libxml-xmlmemory.html \
! 507: html/libxml-xmlmodule.html \
! 508: html/libxml-xmlreader.html \
! 509: html/libxml-xmlregexp.html \
! 510: html/libxml-xmlsave.html \
! 511: html/libxml-xmlschemas.html \
! 512: html/libxml-xmlschemastypes.html \
! 513: html/libxml-xmlstring.html \
! 514: html/libxml-xmlunicode.html \
! 515: html/libxml-xmlversion.html \
! 516: html/libxml-xmlwriter.html \
! 517: html/libxml-xpath.html \
! 518: html/libxml-xpathInternals.html \
! 519: html/libxml-xpointer.html \
! 520: html/libxml-xzlib.html \
! 521: html/right.png \
! 522: html/up.png \
! 523: index.html \
! 524: index.py \
! 525: interface.html \
! 526: intro.html \
! 527: library.html \
! 528: libxml.gif \
! 529: libxml2-api.xml \
! 530: libxml2.xsa \
! 531: namespaces.html \
! 532: newapi.xsl \
! 533: news.html \
! 534: news.xsl \
! 535: python.html \
! 536: redhat.gif \
! 537: search.php \
! 538: searches.html \
! 539: searches.xsl \
! 540: site.xsl \
! 541: smallfootonly.gif \
! 542: structure.gif \
! 543: symbols.xml \
! 544: syms.xsl \
! 545: threads.html \
! 546: tree.html \
! 547: tutorial/apa.html \
! 548: tutorial/apb.html \
! 549: tutorial/apc.html \
! 550: tutorial/apd.html \
! 551: tutorial/ape.html \
! 552: tutorial/apf.html \
! 553: tutorial/apg.html \
! 554: tutorial/aph.html \
! 555: tutorial/api.html \
! 556: tutorial/ar01s02.html \
! 557: tutorial/ar01s03.html \
! 558: tutorial/ar01s04.html \
! 559: tutorial/ar01s05.html \
! 560: tutorial/ar01s06.html \
! 561: tutorial/ar01s07.html \
! 562: tutorial/ar01s08.html \
! 563: tutorial/ar01s09.html \
! 564: tutorial/images/blank.png \
! 565: tutorial/images/callouts/1.png \
! 566: tutorial/images/callouts/10.png \
! 567: tutorial/images/callouts/2.png \
! 568: tutorial/images/callouts/3.png \
! 569: tutorial/images/callouts/4.png \
! 570: tutorial/images/callouts/5.png \
! 571: tutorial/images/callouts/6.png \
! 572: tutorial/images/callouts/7.png \
! 573: tutorial/images/callouts/8.png \
! 574: tutorial/images/callouts/9.png \
! 575: tutorial/images/caution.png \
! 576: tutorial/images/draft.png \
! 577: tutorial/images/home.png \
! 578: tutorial/images/important.png \
! 579: tutorial/images/next.png \
! 580: tutorial/images/note.png \
! 581: tutorial/images/prev.png \
! 582: tutorial/images/tip.png \
! 583: tutorial/images/toc-blank.png \
! 584: tutorial/images/toc-minus.png \
! 585: tutorial/images/toc-plus.png \
! 586: tutorial/images/up.png \
! 587: tutorial/images/warning.png \
! 588: tutorial/includeaddattribute.c \
! 589: tutorial/includeaddkeyword.c \
! 590: tutorial/includeconvert.c \
! 591: tutorial/includegetattribute.c \
! 592: tutorial/includekeyword.c \
! 593: tutorial/includexpath.c \
! 594: tutorial/index.html \
! 595: tutorial/ix01.html \
! 596: tutorial/xmltutorial.pdf \
! 597: upgrade.html \
! 598: w3c.png \
! 599: wiki.xsl \
! 600: xml.html \
! 601: xmlcatalog.1 \
! 602: xmlcatalog_man.html \
! 603: xmlcatalog_man.xml \
! 604: xmldtd.html \
! 605: xmlio.html \
! 606: xmllint.1 \
! 607: xmllint.html \
! 608: xmllint.xml \
! 609: xmlmem.html \
! 610: xmlreader.html \
! 611: xsa.xsl
1.1 misho 612:
613: man_MANS = xmllint.1 xmlcatalog.1
1.1.1.3 ! misho 614: @REBUILD_DOCS_TRUE@source_file_deps = \
! 615: @REBUILD_DOCS_TRUE@ $(filter-out %/xmlversion.h, $(wildcard $(top_srcdir)/include/libxml/*.h)) \
! 616: @REBUILD_DOCS_TRUE@ $(top_srcdir)/include/libxml/xmlversion.h.in \
! 617: @REBUILD_DOCS_TRUE@ $(wildcard $(top_srcdir)/*.c)
! 618:
1.1 misho 619: all: all-recursive
620:
621: .SUFFIXES:
622: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
623: @for dep in $?; do \
624: case '$(am__configure_deps)' in \
625: *$$dep*) \
626: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
627: && { if test -f $@; then exit 0; else break; fi; }; \
628: exit 1;; \
629: esac; \
630: done; \
631: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
632: $(am__cd) $(top_srcdir) && \
633: $(AUTOMAKE) --gnu doc/Makefile
634: .PRECIOUS: Makefile
635: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
636: @case '$?' in \
637: *config.status*) \
638: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
639: *) \
640: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
641: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
642: esac;
643:
644: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
645: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
646:
647: $(top_srcdir)/configure: $(am__configure_deps)
648: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
649: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
650: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
651: $(am__aclocal_m4_deps):
652:
653: mostlyclean-libtool:
654: -rm -f *.lo
655:
656: clean-libtool:
657: -rm -rf .libs _libs
658: install-man1: $(man_MANS)
659: @$(NORMAL_INSTALL)
1.1.1.3 ! misho 660: @list1=''; \
! 661: list2='$(man_MANS)'; \
! 662: test -n "$(man1dir)" \
! 663: && test -n "`echo $$list1$$list2`" \
! 664: || exit 0; \
! 665: echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
! 666: $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
! 667: { for i in $$list1; do echo "$$i"; done; \
! 668: if test -n "$$list2"; then \
! 669: for i in $$list2; do echo "$$i"; done \
! 670: | sed -n '/\.1[a-z]*$$/p'; \
! 671: fi; \
1.1 misho 672: } | while read p; do \
673: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
674: echo "$$d$$p"; echo "$$p"; \
675: done | \
676: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
677: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
678: sed 'N;N;s,\n, ,g' | { \
679: list=; while read file base inst; do \
680: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
681: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
682: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
683: fi; \
684: done; \
685: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
686: while read files; do \
687: test -z "$$files" || { \
688: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
689: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
690: done; }
691:
692: uninstall-man1:
693: @$(NORMAL_UNINSTALL)
694: @list=''; test -n "$(man1dir)" || exit 0; \
695: files=`{ for i in $$list; do echo "$$i"; done; \
696: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
697: sed -n '/\.1[a-z]*$$/p'; \
698: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
699: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
1.1.1.3 ! misho 700: dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
1.1 misho 701:
702: # This directory's subdirectories are mostly independent; you can cd
703: # into them and run `make' without going through this Makefile.
704: # To change the values of `make' variables: instead of editing Makefiles,
705: # (1) if the variable is set in `config.status', edit `config.status'
706: # (which will cause the Makefiles to be regenerated when you run `make');
707: # (2) otherwise, pass the desired values on the `make' command line.
708: $(RECURSIVE_TARGETS):
709: @fail= failcom='exit 1'; \
710: for f in x $$MAKEFLAGS; do \
711: case $$f in \
712: *=* | --[!k]*);; \
713: *k*) failcom='fail=yes';; \
714: esac; \
715: done; \
716: dot_seen=no; \
717: target=`echo $@ | sed s/-recursive//`; \
718: list='$(SUBDIRS)'; for subdir in $$list; do \
719: echo "Making $$target in $$subdir"; \
720: if test "$$subdir" = "."; then \
721: dot_seen=yes; \
722: local_target="$$target-am"; \
723: else \
724: local_target="$$target"; \
725: fi; \
726: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
727: || eval $$failcom; \
728: done; \
729: if test "$$dot_seen" = "no"; then \
730: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
731: fi; test -z "$$fail"
732:
733: $(RECURSIVE_CLEAN_TARGETS):
734: @fail= failcom='exit 1'; \
735: for f in x $$MAKEFLAGS; do \
736: case $$f in \
737: *=* | --[!k]*);; \
738: *k*) failcom='fail=yes';; \
739: esac; \
740: done; \
741: dot_seen=no; \
742: case "$@" in \
743: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
744: *) list='$(SUBDIRS)' ;; \
745: esac; \
746: rev=''; for subdir in $$list; do \
747: if test "$$subdir" = "."; then :; else \
748: rev="$$subdir $$rev"; \
749: fi; \
750: done; \
751: rev="$$rev ."; \
752: target=`echo $@ | sed s/-recursive//`; \
753: for subdir in $$rev; do \
754: echo "Making $$target in $$subdir"; \
755: if test "$$subdir" = "."; then \
756: local_target="$$target-am"; \
757: else \
758: local_target="$$target"; \
759: fi; \
760: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
761: || eval $$failcom; \
762: done && test -z "$$fail"
763: tags-recursive:
764: list='$(SUBDIRS)'; for subdir in $$list; do \
765: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
766: done
767: ctags-recursive:
768: list='$(SUBDIRS)'; for subdir in $$list; do \
769: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
770: done
771:
772: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
773: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
774: unique=`for i in $$list; do \
775: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
776: done | \
777: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
778: END { if (nonempty) { for (i in files) print i; }; }'`; \
779: mkid -fID $$unique
780: tags: TAGS
781:
782: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
783: $(TAGS_FILES) $(LISP)
784: set x; \
785: here=`pwd`; \
786: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
787: include_option=--etags-include; \
788: empty_fix=.; \
789: else \
790: include_option=--include; \
791: empty_fix=; \
792: fi; \
793: list='$(SUBDIRS)'; for subdir in $$list; do \
794: if test "$$subdir" = .; then :; else \
795: test ! -f $$subdir/TAGS || \
796: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
797: fi; \
798: done; \
799: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
800: unique=`for i in $$list; do \
801: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
802: done | \
803: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
804: END { if (nonempty) { for (i in files) print i; }; }'`; \
805: shift; \
806: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
807: test -n "$$unique" || unique=$$empty_fix; \
808: if test $$# -gt 0; then \
809: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
810: "$$@" $$unique; \
811: else \
812: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
813: $$unique; \
814: fi; \
815: fi
816: ctags: CTAGS
817: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
818: $(TAGS_FILES) $(LISP)
819: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
820: unique=`for i in $$list; do \
821: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
822: done | \
823: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
824: END { if (nonempty) { for (i in files) print i; }; }'`; \
825: test -z "$(CTAGS_ARGS)$$unique" \
826: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
827: $$unique
828:
829: GTAGS:
830: here=`$(am__cd) $(top_builddir) && pwd` \
831: && $(am__cd) $(top_srcdir) \
832: && gtags -i $(GTAGS_ARGS) "$$here"
833:
834: distclean-tags:
835: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
836:
837: distdir: $(DISTFILES)
838: @list='$(MANS)'; if test -n "$$list"; then \
839: list=`for p in $$list; do \
840: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
841: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
842: if test -n "$$list" && \
843: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
844: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
845: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
846: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
847: echo " typically \`make maintainer-clean' will remove them" >&2; \
848: exit 1; \
849: else :; fi; \
850: else :; fi
851: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
852: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
853: list='$(DISTFILES)'; \
854: dist_files=`for file in $$list; do echo $$file; done | \
855: sed -e "s|^$$srcdirstrip/||;t" \
856: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
857: case $$dist_files in \
858: */*) $(MKDIR_P) `echo "$$dist_files" | \
859: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
860: sort -u` ;; \
861: esac; \
862: for file in $$dist_files; do \
863: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
864: if test -d $$d/$$file; then \
865: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
866: if test -d "$(distdir)/$$file"; then \
867: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
868: fi; \
869: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
870: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
871: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
872: fi; \
873: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
874: else \
875: test -f "$(distdir)/$$file" \
876: || cp -p $$d/$$file "$(distdir)/$$file" \
877: || exit 1; \
878: fi; \
879: done
880: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
881: if test "$$subdir" = .; then :; else \
1.1.1.3 ! misho 882: $(am__make_dryrun) \
! 883: || test -d "$(distdir)/$$subdir" \
! 884: || $(MKDIR_P) "$(distdir)/$$subdir" \
! 885: || exit 1; \
1.1 misho 886: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
887: $(am__relativize); \
888: new_distdir=$$reldir; \
889: dir1=$$subdir; dir2="$(top_distdir)"; \
890: $(am__relativize); \
891: new_top_distdir=$$reldir; \
892: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
893: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
894: ($(am__cd) $$subdir && \
895: $(MAKE) $(AM_MAKEFLAGS) \
896: top_distdir="$$new_top_distdir" \
897: distdir="$$new_distdir" \
898: am__remove_distdir=: \
899: am__skip_length_check=: \
900: am__skip_mode_fix=: \
901: distdir) \
902: || exit 1; \
903: fi; \
904: done
905: check-am: all-am
906: check: check-recursive
907: all-am: Makefile $(MANS)
908: installdirs: installdirs-recursive
909: installdirs-am:
910: for dir in "$(DESTDIR)$(man1dir)"; do \
911: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
912: done
913: install: install-recursive
914: install-exec: install-exec-recursive
915: install-data: install-data-recursive
916: uninstall: uninstall-recursive
917:
918: install-am: all-am
919: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
920:
921: installcheck: installcheck-recursive
922: install-strip:
1.1.1.3 ! misho 923: if test -z '$(STRIP)'; then \
! 924: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 925: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 926: install; \
! 927: else \
! 928: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 929: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 930: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
! 931: fi
1.1 misho 932: mostlyclean-generic:
933:
934: clean-generic:
935:
936: distclean-generic:
937: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
938: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
939:
940: maintainer-clean-generic:
941: @echo "This command is intended for maintainers to use"
942: @echo "it deletes files that may require special tools to rebuild."
943: clean: clean-recursive
944:
945: clean-am: clean-generic clean-libtool clean-local mostlyclean-am
946:
947: distclean: distclean-recursive
948: -rm -f Makefile
949: distclean-am: clean-am distclean-generic distclean-tags
950:
951: dvi: dvi-recursive
952:
953: dvi-am:
954:
955: html: html-recursive
956:
957: html-am:
958:
959: info: info-recursive
960:
961: info-am:
962:
963: install-data-am: install-data-local install-man
964:
965: install-dvi: install-dvi-recursive
966:
967: install-dvi-am:
968:
969: install-exec-am:
970:
971: install-html: install-html-recursive
972:
973: install-html-am:
974:
975: install-info: install-info-recursive
976:
977: install-info-am:
978:
979: install-man: install-man1
980:
981: install-pdf: install-pdf-recursive
982:
983: install-pdf-am:
984:
985: install-ps: install-ps-recursive
986:
987: install-ps-am:
988:
989: installcheck-am:
990:
991: maintainer-clean: maintainer-clean-recursive
992: -rm -f Makefile
993: maintainer-clean-am: distclean-am maintainer-clean-generic \
994: maintainer-clean-local
995:
996: mostlyclean: mostlyclean-recursive
997:
998: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
999:
1000: pdf: pdf-recursive
1001:
1002: pdf-am:
1003:
1004: ps: ps-recursive
1005:
1006: ps-am:
1007:
1008: uninstall-am: uninstall-man
1009:
1010: uninstall-man: uninstall-man1
1011:
1012: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
1013: install-am install-strip tags-recursive
1014:
1015: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
1016: all all-am check check-am clean clean-generic clean-libtool \
1017: clean-local ctags ctags-recursive distclean distclean-generic \
1018: distclean-libtool distclean-tags distdir dvi dvi-am html \
1019: html-am info info-am install install-am install-data \
1020: install-data-am install-data-local install-dvi install-dvi-am \
1021: install-exec install-exec-am install-html install-html-am \
1022: install-info install-info-am install-man install-man1 \
1023: install-pdf install-pdf-am install-ps install-ps-am \
1024: install-strip installcheck installcheck-am installdirs \
1025: installdirs-am maintainer-clean maintainer-clean-generic \
1026: maintainer-clean-local mostlyclean mostlyclean-generic \
1027: mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
1028: uninstall uninstall-am uninstall-man uninstall-man1
1029:
1030:
1.1.1.3 ! misho 1031: @REBUILD_DOCS_TRUE@docs: web $(top_builddir)/NEWS libxml2.xsa $(man_MANS)
1.1 misho 1032:
1.1.1.3 ! misho 1033: @REBUILD_DOCS_TRUE@api: libxml2-api.xml libxml2-refs.xml $(APIPAGES) $(srcdir)/html/index.html $(WIN32_DIR)/libxml2.def.src ../elfgcchack.h $(srcdir)/site.xsl
1.1 misho 1034:
1.1.1.3 ! misho 1035: @REBUILD_DOCS_TRUE@web: $(PAGES)
1.1 misho 1036:
1.1.1.3 ! misho 1037: @REBUILD_DOCS_TRUE@../elfgcchack.h: $(srcdir)/elfgcchack.xsl $(srcdir)/libxml2-api.xml
! 1038: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XSLTPROC) ] ; then \
! 1039: @REBUILD_DOCS_TRUE@ echo "Rebuilding the elfgcchack.h header" ; \
! 1040: @REBUILD_DOCS_TRUE@ $(XSLTPROC) --nonet $(srcdir)/elfgcchack.xsl $(srcdir)/libxml2-api.xml > elfgcchack.h ; \
! 1041: @REBUILD_DOCS_TRUE@ if [ "`diff -q elfgcchack.h ../elfgcchack.h`" ] ; then \
! 1042: @REBUILD_DOCS_TRUE@ echo "updating ../elfgcchack.h"; \
! 1043: @REBUILD_DOCS_TRUE@ cp elfgcchack.h ../elfgcchack.h; \
! 1044: @REBUILD_DOCS_TRUE@ fi ; rm -f elfgcchack.h ; fi );
! 1045:
! 1046: @REBUILD_DOCS_TRUE@$(PAGES): xml.html $(srcdir)/site.xsl
! 1047: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XSLTPROC) ] ; then \
! 1048: @REBUILD_DOCS_TRUE@ echo "Rebuilding the HTML Web pages from xml.html" ; \
! 1049: @REBUILD_DOCS_TRUE@ $(XSLTPROC) --nonet --html --path $(srcdir) $(srcdir)/site.xsl $(srcdir)/xml.html > index.html ; fi );
! 1050: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XMLLINT) ] ; then \
! 1051: @REBUILD_DOCS_TRUE@ echo "Validating the HTML Web pages" ; \
! 1052: @REBUILD_DOCS_TRUE@ $(XMLLINT) --nonet --valid --noout $(PAGES) ; fi );
! 1053:
! 1054: @REBUILD_DOCS_TRUE@$(top_builddir)/NEWS: $(srcdir)/news.xsl $(srcdir)/news.html
! 1055: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XSLTPROC) ] ; then \
! 1056: @REBUILD_DOCS_TRUE@ $(XSLTPROC) --nonet $(srcdir)/news.xsl $(srcdir)/news.html > $(top_builddir)/NEWS ; fi );
! 1057:
! 1058: @REBUILD_DOCS_TRUE@libxml2.xsa: $(srcdir)/xsa.xsl $(srcdir)/news.html
! 1059: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XSLTPROC) ] ; then \
! 1060: @REBUILD_DOCS_TRUE@ echo "Rebuilding the NEWS file" ; \
! 1061: @REBUILD_DOCS_TRUE@ $(XSLTPROC) --nonet $(srcdir)/xsa.xsl $(srcdir)/news.html > libxml2.xsa ; fi );
! 1062:
! 1063: @REBUILD_DOCS_TRUE@$(APIPAGES): libxml2-api.xml libxml2-refs.xml $(srcdir)/site.xsl $(srcdir)/api.xsl
! 1064: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XSLTPROC) ] ; then \
! 1065: @REBUILD_DOCS_TRUE@ echo "Rebuilding the HTML API pages from libxml2-refs.xml" ; \
! 1066: @REBUILD_DOCS_TRUE@ $(XSLTPROC) --nonet --html $(srcdir)/api.xsl \
! 1067: @REBUILD_DOCS_TRUE@ $(srcdir)/xml.html ; fi );
! 1068: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XMLLINT) ] ; then \
! 1069: @REBUILD_DOCS_TRUE@ echo "Validating the HTML API pages" ; \
! 1070: @REBUILD_DOCS_TRUE@ $(XMLLINT) --nonet --valid --noout API*.html ; fi );
! 1071:
! 1072: @REBUILD_DOCS_TRUE@$(srcdir)/html/index.html: libxml2-api.xml $(srcdir)/newapi.xsl
! 1073: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XSLTPROC) ] ; then \
! 1074: @REBUILD_DOCS_TRUE@ echo "Rebuilding the HTML pages from the XML API" ; \
! 1075: @REBUILD_DOCS_TRUE@ $(XSLTPROC) --nonet $(srcdir)/newapi.xsl $(srcdir)/libxml2-api.xml ; fi )
! 1076: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XMLLINT) ] ; then \
! 1077: @REBUILD_DOCS_TRUE@ echo "Validating the resulting XHTML pages" ; \
! 1078: @REBUILD_DOCS_TRUE@ $(XMLLINT) --nonet --valid --noout html/*.html ; fi );
! 1079:
! 1080: @REBUILD_DOCS_TRUE@wiki: libxml2-api.xml $(srcdir)/wiki.xsl
! 1081: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XSLTPROC) ] ; then \
! 1082: @REBUILD_DOCS_TRUE@ echo "Rebuilding the wiki HTML pages from the XML API" ; \
! 1083: @REBUILD_DOCS_TRUE@ $(XSLTPROC) --nonet $(srcdir)/wiki.xsl $(srcdir)/libxml2-api.xml; fi )
! 1084:
! 1085: @REBUILD_DOCS_TRUE@$(WIN32_DIR)/libxml2.def.src: libxml2-api.xml
! 1086: @REBUILD_DOCS_TRUE@ -@(if [ -x $(XSLTPROC) ] ; then \
! 1087: @REBUILD_DOCS_TRUE@ $(XSLTPROC) -o $(WIN32_DIR)/libxml2.def.src \
! 1088: @REBUILD_DOCS_TRUE@ --nonet $(WIN32_DIR)/defgen.xsl libxml2-api.xml ; fi )
! 1089:
! 1090: @REBUILD_DOCS_TRUE@libxml2-api.xml libxml2-refs.xml ../libxml2.syms: apibuild.py symbols.xml syms.xsl checkapisym.xsl $(source_file_deps)
! 1091: @REBUILD_DOCS_TRUE@ test -f $(top_srcdir)/include/libxml/xmlversion.h
! 1092: @REBUILD_DOCS_TRUE@ (cd $(srcdir) && ./apibuild.py)
! 1093: @REBUILD_DOCS_TRUE@ ($(XSLTPROC) $(srcdir)/checkapisym.xsl $(srcdir)/libxml2-api.xml)
! 1094: @REBUILD_DOCS_TRUE@ ($(XSLTPROC) -o ../libxml2.syms $(srcdir)/syms.xsl $(srcdir)/symbols.xml)
! 1095: @REBUILD_DOCS_TRUE@ -@(cd .. ; $(MAKE) rebuild_testapi)
! 1096:
! 1097: @REBUILD_DOCS_TRUE@xmllint.1: xmllint.xml
! 1098: @REBUILD_DOCS_TRUE@ -@($(XSLTPROC) --nonet xmllint.xml)
! 1099:
! 1100: @REBUILD_DOCS_TRUE@xmlcatalog.1: xmlcatalog_man.xml
! 1101: @REBUILD_DOCS_TRUE@ -@($(XSLTPROC) --nonet xmlcatalog_man.xml)
! 1102:
! 1103: @REBUILD_DOCS_TRUE@check-extra-dist:
! 1104: @REBUILD_DOCS_TRUE@ for f in $(EXTRA_DIST_wc) ; do echo $$f; done | sort -u >tmp.EXTRA_DIST_wc
! 1105: @REBUILD_DOCS_TRUE@ for f in $(EXTRA_DIST) ; do echo $$f; done | sort >tmp.EXTRA_DIST
! 1106: @REBUILD_DOCS_TRUE@ diff -u tmp.EXTRA_DIST_wc tmp.EXTRA_DIST
! 1107: @REBUILD_DOCS_TRUE@ rm -f tmp.EXTRA_DIST_wc tmp.EXTRA_DIST
1.1 misho 1108:
1109: clean-local:
1110: rm -f *~ *.bak *.hierarchy *.signals *-unused.txt
1111:
1112: maintainer-clean-local: clean-local
1113: rm -rf libxml-decl-list.txt libxml-decl.txt
1114:
1.1.1.3 ! misho 1115: rebuild: api docs
1.1 misho 1116:
1117: install-data-local:
1.1.1.3 ! misho 1118: $(MKDIR_P) $(DESTDIR)$(HTML_DIR)
! 1119: -$(INSTALL) -m 0644 $(srcdir)/xml.html $(srcdir)/encoding.html $(srcdir)/FAQ.html $(srcdir)/structure.gif $(srcdir)/DOM.gif $(srcdir)/smallfootonly.gif $(srcdir)/redhat.gif $(srcdir)/libxml.gif $(srcdir)/w3c.png $(srcdir)/Libxml2-Logo-180x168.gif $(srcdir)/Libxml2-Logo-90x34.gif $(DESTDIR)$(HTML_DIR)
! 1120: $(MKDIR_P) $(DESTDIR)$(HTML_DIR)/html
! 1121: -$(INSTALL) -m 0644 $(srcdir)/html/*.html $(DESTDIR)$(HTML_DIR)/html
! 1122: -$(INSTALL) -m 0644 $(srcdir)/html/*.png $(DESTDIR)$(HTML_DIR)/html
! 1123: $(MKDIR_P) $(DESTDIR)$(HTML_DIR)/tutorial
! 1124: -$(INSTALL) -m 0644 $(srcdir)/tutorial/*.* \
1.1 misho 1125: $(DESTDIR)$(HTML_DIR)/tutorial
1.1.1.3 ! misho 1126: $(MKDIR_P) $(DESTDIR)$(HTML_DIR)/tutorial/images
! 1127: -$(INSTALL) -m 0644 $(srcdir)/tutorial/images/*.* \
1.1 misho 1128: $(DESTDIR)$(HTML_DIR)/tutorial/images
1.1.1.3 ! misho 1129: $(MKDIR_P) $(DESTDIR)$(HTML_DIR)/tutorial/images/callouts
! 1130: -$(INSTALL) -m 0644 $(srcdir)/tutorial/images/callouts/*.* \
1.1 misho 1131: $(DESTDIR)$(HTML_DIR)/tutorial/images/callouts
1132:
1.1.1.3 ! misho 1133: .PHONY: docs api web wiki rebuild
1.1 misho 1134:
1135: # Tell versions [3.59,3.63) of GNU make to not export all variables.
1136: # Otherwise a system limit (for SysV at least) may be exceeded.
1137: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / libxml2 / doc