1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6: # Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
18: pkgdatadir = $(datadir)/@PACKAGE@
19: pkgincludedir = $(includedir)/@PACKAGE@
20: pkglibdir = $(libdir)/@PACKAGE@
21: pkglibexecdir = $(libexecdir)/@PACKAGE@
22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23: install_sh_DATA = $(install_sh) -c -m 644
24: install_sh_PROGRAM = $(install_sh) -c
25: install_sh_SCRIPT = $(install_sh) -c
26: INSTALL_HEADER = $(INSTALL_DATA)
27: transform = $(program_transform_name)
28: NORMAL_INSTALL = :
29: PRE_INSTALL = :
30: POST_INSTALL = :
31: NORMAL_UNINSTALL = :
32: PRE_UNINSTALL = :
33: POST_UNINSTALL = :
34: build_triplet = @build@
35: host_triplet = @host@
36: subdir = doc
37: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
38: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
39: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
40: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
41: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
42: $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
43: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
44: $(ACLOCAL_M4)
45: mkinstalldirs = $(install_sh) -d
46: CONFIG_HEADER = $(top_builddir)/config.h
47: CONFIG_CLEAN_FILES =
48: CONFIG_CLEAN_VPATH_FILES =
49: SOURCES =
50: DIST_SOURCES =
51: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
52: html-recursive info-recursive install-data-recursive \
53: install-dvi-recursive install-exec-recursive \
54: install-html-recursive install-info-recursive \
55: install-pdf-recursive install-ps-recursive install-recursive \
56: installcheck-recursive installdirs-recursive pdf-recursive \
57: ps-recursive uninstall-recursive
58: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
59: am__vpath_adj = case $$p in \
60: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
61: *) f=$$p;; \
62: esac;
63: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
64: am__install_max = 40
65: am__nobase_strip_setup = \
66: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
67: am__nobase_strip = \
68: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
69: am__nobase_list = $(am__nobase_strip_setup); \
70: for p in $$list; do echo "$$p $$p"; done | \
71: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
72: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
73: if (++n[$$2] == $(am__install_max)) \
74: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
75: END { for (dir in files) print dir, files[dir] }'
76: am__base_list = \
77: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
78: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
79: man1dir = $(mandir)/man1
80: am__installdirs = "$(DESTDIR)$(man1dir)"
81: NROFF = nroff
82: MANS = $(man_MANS)
83: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
84: distclean-recursive maintainer-clean-recursive
85: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
86: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
87: distdir
88: ETAGS = etags
89: CTAGS = ctags
90: DIST_SUBDIRS = $(SUBDIRS)
91: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
92: am__relativize = \
93: dir0=`pwd`; \
94: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
95: sed_rest='s,^[^/]*/*,,'; \
96: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
97: sed_butlast='s,/*[^/]*$$,,'; \
98: while test -n "$$dir1"; do \
99: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
100: if test "$$first" != "."; then \
101: if test "$$first" = ".."; then \
102: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
103: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
104: else \
105: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
106: if test "$$first2" = "$$first"; then \
107: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
108: else \
109: dir2="../$$dir2"; \
110: fi; \
111: dir0="$$dir0"/"$$first"; \
112: fi; \
113: fi; \
114: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
115: done; \
116: reldir="$$dir2"
117: ACLOCAL = @ACLOCAL@
118: AMTAR = @AMTAR@
119: AR = @AR@
120: AS = @AS@
121: AUTOCONF = @AUTOCONF@
122: AUTOHEADER = @AUTOHEADER@
123: AUTOMAKE = @AUTOMAKE@
124: AWK = @AWK@
125: BASE_THREAD_LIBS = @BASE_THREAD_LIBS@
126: C14N_OBJ = @C14N_OBJ@
127: CATALOG_OBJ = @CATALOG_OBJ@
128: CC = @CC@
129: CCDEPMODE = @CCDEPMODE@
130: CFLAGS = @CFLAGS@
131: CPP = @CPP@
132: CPPFLAGS = @CPPFLAGS@
133: CYGPATH_W = @CYGPATH_W@
134: CYGWIN_EXTRA_LDFLAGS = @CYGWIN_EXTRA_LDFLAGS@
135: CYGWIN_EXTRA_PYTHON_LIBADD = @CYGWIN_EXTRA_PYTHON_LIBADD@
136: DEBUG_OBJ = @DEBUG_OBJ@
137: DEFS = @DEFS@
138: DEPDIR = @DEPDIR@
139: DLLTOOL = @DLLTOOL@
140: DOCB_OBJ = @DOCB_OBJ@
141: DSYMUTIL = @DSYMUTIL@
142: DUMPBIN = @DUMPBIN@
143: ECHO_C = @ECHO_C@
144: ECHO_N = @ECHO_N@
145: ECHO_T = @ECHO_T@
146: EGREP = @EGREP@
147: EXEEXT = @EXEEXT@
148: FGREP = @FGREP@
149: FTP_OBJ = @FTP_OBJ@
150: GREP = @GREP@
151: HAVE_ISINF = @HAVE_ISINF@
152: HAVE_ISNAN = @HAVE_ISNAN@
153: HTML_DIR = @HTML_DIR@
154: HTML_OBJ = @HTML_OBJ@
155: HTTP_OBJ = @HTTP_OBJ@
156: ICONV_LIBS = @ICONV_LIBS@
157: INSTALL = @INSTALL@
158: INSTALL_DATA = @INSTALL_DATA@
159: INSTALL_PROGRAM = @INSTALL_PROGRAM@
160: INSTALL_SCRIPT = @INSTALL_SCRIPT@
161: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
162: LD = @LD@
163: LDFLAGS = @LDFLAGS@
164: LIBOBJS = @LIBOBJS@
165: LIBS = @LIBS@
166: LIBTOOL = @LIBTOOL@
167: LIBXML_MAJOR_VERSION = @LIBXML_MAJOR_VERSION@
168: LIBXML_MICRO_VERSION = @LIBXML_MICRO_VERSION@
169: LIBXML_MINOR_VERSION = @LIBXML_MINOR_VERSION@
170: LIBXML_VERSION = @LIBXML_VERSION@
171: LIBXML_VERSION_EXTRA = @LIBXML_VERSION_EXTRA@
172: LIBXML_VERSION_INFO = @LIBXML_VERSION_INFO@
173: LIBXML_VERSION_NUMBER = @LIBXML_VERSION_NUMBER@
174: LIPO = @LIPO@
175: LN_S = @LN_S@
176: LTLIBOBJS = @LTLIBOBJS@
177: MAKEINFO = @MAKEINFO@
178: MKDIR_P = @MKDIR_P@
179: MODULE_EXTENSION = @MODULE_EXTENSION@
180: MODULE_PLATFORM_LIBS = @MODULE_PLATFORM_LIBS@
181: MV = @MV@
182: M_LIBS = @M_LIBS@
183: NM = @NM@
184: NMEDIT = @NMEDIT@
185: OBJDUMP = @OBJDUMP@
186: OBJEXT = @OBJEXT@
187: OTOOL = @OTOOL@
188: OTOOL64 = @OTOOL64@
189: PACKAGE = @PACKAGE@
190: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
191: PACKAGE_NAME = @PACKAGE_NAME@
192: PACKAGE_STRING = @PACKAGE_STRING@
193: PACKAGE_TARNAME = @PACKAGE_TARNAME@
194: PACKAGE_URL = @PACKAGE_URL@
195: PACKAGE_VERSION = @PACKAGE_VERSION@
196: PATH_SEPARATOR = @PATH_SEPARATOR@
197: PERL = @PERL@
198: PYTHON = @PYTHON@
199: PYTHON_INCLUDES = @PYTHON_INCLUDES@
200: PYTHON_LIBS = @PYTHON_LIBS@
201: PYTHON_SITE_PACKAGES = @PYTHON_SITE_PACKAGES@
202: PYTHON_SUBDIR = @PYTHON_SUBDIR@
203: PYTHON_TESTS = @PYTHON_TESTS@
204: PYTHON_VERSION = @PYTHON_VERSION@
205: RANLIB = @RANLIB@
206: RDL_LIBS = @RDL_LIBS@
207: READER_TEST = @READER_TEST@
208: RELDATE = @RELDATE@
209: RM = @RM@
210: SED = @SED@
211: SET_MAKE = @SET_MAKE@
212: SHELL = @SHELL@
213: STATIC_BINARIES = @STATIC_BINARIES@
214: STRIP = @STRIP@
215: TAR = @TAR@
216: TEST_C14N = @TEST_C14N@
217: TEST_CATALOG = @TEST_CATALOG@
218: TEST_DEBUG = @TEST_DEBUG@
219: TEST_HTML = @TEST_HTML@
220: TEST_MODULES = @TEST_MODULES@
221: TEST_PATTERN = @TEST_PATTERN@
222: TEST_PHTML = @TEST_PHTML@
223: TEST_PUSH = @TEST_PUSH@
224: TEST_REGEXPS = @TEST_REGEXPS@
225: TEST_SAX = @TEST_SAX@
226: TEST_SCHEMAS = @TEST_SCHEMAS@
227: TEST_SCHEMATRON = @TEST_SCHEMATRON@
228: TEST_THREADS = @TEST_THREADS@
229: TEST_VALID = @TEST_VALID@
230: TEST_VTIME = @TEST_VTIME@
231: TEST_XINCLUDE = @TEST_XINCLUDE@
232: TEST_XPATH = @TEST_XPATH@
233: TEST_XPTR = @TEST_XPTR@
234: THREADS_W32 = @THREADS_W32@
235: THREAD_CFLAGS = @THREAD_CFLAGS@
236: THREAD_LIBS = @THREAD_LIBS@
237: U = @U@
238: VERSION = @VERSION@
239: VERSION_SCRIPT_FLAGS = @VERSION_SCRIPT_FLAGS@
240: WGET = @WGET@
241: WIN32_EXTRA_LDFLAGS = @WIN32_EXTRA_LDFLAGS@
242: WIN32_EXTRA_LIBADD = @WIN32_EXTRA_LIBADD@
243: WIN32_EXTRA_PYTHON_LIBADD = @WIN32_EXTRA_PYTHON_LIBADD@
244: WITH_C14N = @WITH_C14N@
245: WITH_CATALOG = @WITH_CATALOG@
246: WITH_DEBUG = @WITH_DEBUG@
247: WITH_DOCB = @WITH_DOCB@
248: WITH_FTP = @WITH_FTP@
249: WITH_HTML = @WITH_HTML@
250: WITH_HTTP = @WITH_HTTP@
251: WITH_ICONV = @WITH_ICONV@
252: WITH_ICU = @WITH_ICU@
253: WITH_ISO8859X = @WITH_ISO8859X@
254: WITH_LEGACY = @WITH_LEGACY@
255: WITH_MEM_DEBUG = @WITH_MEM_DEBUG@
256: WITH_MODULES = @WITH_MODULES@
257: WITH_OUTPUT = @WITH_OUTPUT@
258: WITH_PATTERN = @WITH_PATTERN@
259: WITH_PUSH = @WITH_PUSH@
260: WITH_READER = @WITH_READER@
261: WITH_REGEXPS = @WITH_REGEXPS@
262: WITH_RUN_DEBUG = @WITH_RUN_DEBUG@
263: WITH_SAX1 = @WITH_SAX1@
264: WITH_SCHEMAS = @WITH_SCHEMAS@
265: WITH_SCHEMATRON = @WITH_SCHEMATRON@
266: WITH_THREADS = @WITH_THREADS@
267: WITH_TREE = @WITH_TREE@
268: WITH_TRIO = @WITH_TRIO@
269: WITH_VALID = @WITH_VALID@
270: WITH_WRITER = @WITH_WRITER@
271: WITH_XINCLUDE = @WITH_XINCLUDE@
272: WITH_XPATH = @WITH_XPATH@
273: WITH_XPTR = @WITH_XPTR@
274: WITH_ZLIB = @WITH_ZLIB@
275: XINCLUDE_OBJ = @XINCLUDE_OBJ@
276: XMLLINT = @XMLLINT@
277: XML_CFLAGS = @XML_CFLAGS@
278: XML_INCLUDEDIR = @XML_INCLUDEDIR@
279: XML_LIBDIR = @XML_LIBDIR@
280: XML_LIBS = @XML_LIBS@
281: XML_LIBTOOLLIBS = @XML_LIBTOOLLIBS@
282: XPATH_OBJ = @XPATH_OBJ@
283: XPTR_OBJ = @XPTR_OBJ@
284: XSLTPROC = @XSLTPROC@
285: Z_CFLAGS = @Z_CFLAGS@
286: Z_LIBS = @Z_LIBS@
287: abs_builddir = @abs_builddir@
288: abs_srcdir = @abs_srcdir@
289: abs_top_builddir = @abs_top_builddir@
290: abs_top_srcdir = @abs_top_srcdir@
291: ac_ct_CC = @ac_ct_CC@
292: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
293: am__include = @am__include@
294: am__leading_dot = @am__leading_dot@
295: am__quote = @am__quote@
296: am__tar = @am__tar@
297: am__untar = @am__untar@
298: bindir = @bindir@
299: build = @build@
300: build_alias = @build_alias@
301: build_cpu = @build_cpu@
302: build_os = @build_os@
303: build_vendor = @build_vendor@
304: builddir = @builddir@
305: datadir = @datadir@
306: datarootdir = @datarootdir@
307: docdir = @docdir@
308: dvidir = @dvidir@
309: exec_prefix = @exec_prefix@
310: host = @host@
311: host_alias = @host_alias@
312: host_cpu = @host_cpu@
313: host_os = @host_os@
314: host_vendor = @host_vendor@
315: htmldir = @htmldir@
316: includedir = @includedir@
317: infodir = @infodir@
318: install_sh = @install_sh@
319: libdir = @libdir@
320: libexecdir = @libexecdir@
321: localedir = @localedir@
322: localstatedir = @localstatedir@
323: mandir = @mandir@
324: mkdir_p = @mkdir_p@
325: oldincludedir = @oldincludedir@
326: pdfdir = @pdfdir@
327: prefix = @prefix@
328: program_transform_name = @program_transform_name@
329: psdir = @psdir@
330: pythondir = @pythondir@
331: sbindir = @sbindir@
332: sharedstatedir = @sharedstatedir@
333: srcdir = @srcdir@
334: sysconfdir = @sysconfdir@
335: target_alias = @target_alias@
336: top_build_prefix = @top_build_prefix@
337: top_builddir = @top_builddir@
338: top_srcdir = @top_srcdir@
339: SUBDIRS = devhelp examples
340:
341: # The top-level SGML file.
342: DOC_MAIN_XML_FILE = gnome-xml.xml
343:
344: # The directory containing the source code (if it contains documentation).
345: DOC_SOURCE_DIR = ..
346:
347: # A file in win32 depends upon one of the doc files
348: WIN32_DIR = $(top_srcdir)/win32
349: PAGES = architecture.html bugs.html contribs.html docs.html DOM.html \
350: downloads.html entities.html example.html help.html index.html \
351: interface.html intro.html library.html namespaces.html news.html \
352: tree.html xmldtd.html XMLinfo.html XSLT.html
353:
354: APIPAGES = APIconstructors.html APIfiles.html APIfunctions.html \
355: APIsymbols.html APIchunk0.html
356:
357: EXTRA_DIST = xmlcatalog_man.xml tutorial/*.html tutorial/*.c tutorial/*.pdf \
358: tutorial/images/*.png tutorial/images/callouts/*.png \
359: API*.html *.1 *.xsl *.html *.gif w3c.png html/*.html \
360: html/*.png libxml2-api.xml index.py search.php \
361: apibuild.py libxml2.xsa xmllint.xml xmlcatalog_man.xml \
362: README.docs symbols.xml
363:
364: man_MANS = xmllint.1 xmlcatalog.1
365: all: all-recursive
366:
367: .SUFFIXES:
368: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
369: @for dep in $?; do \
370: case '$(am__configure_deps)' in \
371: *$$dep*) \
372: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
373: && { if test -f $@; then exit 0; else break; fi; }; \
374: exit 1;; \
375: esac; \
376: done; \
377: echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
378: $(am__cd) $(top_srcdir) && \
379: $(AUTOMAKE) --gnu doc/Makefile
380: .PRECIOUS: Makefile
381: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
382: @case '$?' in \
383: *config.status*) \
384: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
385: *) \
386: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
387: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
388: esac;
389:
390: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
391: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
392:
393: $(top_srcdir)/configure: $(am__configure_deps)
394: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
395: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
396: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
397: $(am__aclocal_m4_deps):
398:
399: mostlyclean-libtool:
400: -rm -f *.lo
401:
402: clean-libtool:
403: -rm -rf .libs _libs
404: install-man1: $(man_MANS)
405: @$(NORMAL_INSTALL)
406: test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
407: @list=''; test -n "$(man1dir)" || exit 0; \
408: { for i in $$list; do echo "$$i"; done; \
409: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
410: sed -n '/\.1[a-z]*$$/p'; \
411: } | while read p; do \
412: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
413: echo "$$d$$p"; echo "$$p"; \
414: done | \
415: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
416: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
417: sed 'N;N;s,\n, ,g' | { \
418: list=; while read file base inst; do \
419: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
420: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
421: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
422: fi; \
423: done; \
424: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
425: while read files; do \
426: test -z "$$files" || { \
427: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
428: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
429: done; }
430:
431: uninstall-man1:
432: @$(NORMAL_UNINSTALL)
433: @list=''; test -n "$(man1dir)" || exit 0; \
434: files=`{ for i in $$list; do echo "$$i"; done; \
435: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
436: sed -n '/\.1[a-z]*$$/p'; \
437: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
438: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
439: test -z "$$files" || { \
440: echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
441: cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
442:
443: # This directory's subdirectories are mostly independent; you can cd
444: # into them and run `make' without going through this Makefile.
445: # To change the values of `make' variables: instead of editing Makefiles,
446: # (1) if the variable is set in `config.status', edit `config.status'
447: # (which will cause the Makefiles to be regenerated when you run `make');
448: # (2) otherwise, pass the desired values on the `make' command line.
449: $(RECURSIVE_TARGETS):
450: @fail= failcom='exit 1'; \
451: for f in x $$MAKEFLAGS; do \
452: case $$f in \
453: *=* | --[!k]*);; \
454: *k*) failcom='fail=yes';; \
455: esac; \
456: done; \
457: dot_seen=no; \
458: target=`echo $@ | sed s/-recursive//`; \
459: list='$(SUBDIRS)'; for subdir in $$list; do \
460: echo "Making $$target in $$subdir"; \
461: if test "$$subdir" = "."; then \
462: dot_seen=yes; \
463: local_target="$$target-am"; \
464: else \
465: local_target="$$target"; \
466: fi; \
467: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
468: || eval $$failcom; \
469: done; \
470: if test "$$dot_seen" = "no"; then \
471: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
472: fi; test -z "$$fail"
473:
474: $(RECURSIVE_CLEAN_TARGETS):
475: @fail= failcom='exit 1'; \
476: for f in x $$MAKEFLAGS; do \
477: case $$f in \
478: *=* | --[!k]*);; \
479: *k*) failcom='fail=yes';; \
480: esac; \
481: done; \
482: dot_seen=no; \
483: case "$@" in \
484: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
485: *) list='$(SUBDIRS)' ;; \
486: esac; \
487: rev=''; for subdir in $$list; do \
488: if test "$$subdir" = "."; then :; else \
489: rev="$$subdir $$rev"; \
490: fi; \
491: done; \
492: rev="$$rev ."; \
493: target=`echo $@ | sed s/-recursive//`; \
494: for subdir in $$rev; do \
495: echo "Making $$target in $$subdir"; \
496: if test "$$subdir" = "."; then \
497: local_target="$$target-am"; \
498: else \
499: local_target="$$target"; \
500: fi; \
501: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
502: || eval $$failcom; \
503: done && test -z "$$fail"
504: tags-recursive:
505: list='$(SUBDIRS)'; for subdir in $$list; do \
506: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
507: done
508: ctags-recursive:
509: list='$(SUBDIRS)'; for subdir in $$list; do \
510: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
511: done
512:
513: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
514: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
515: unique=`for i in $$list; do \
516: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
517: done | \
518: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
519: END { if (nonempty) { for (i in files) print i; }; }'`; \
520: mkid -fID $$unique
521: tags: TAGS
522:
523: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
524: $(TAGS_FILES) $(LISP)
525: set x; \
526: here=`pwd`; \
527: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
528: include_option=--etags-include; \
529: empty_fix=.; \
530: else \
531: include_option=--include; \
532: empty_fix=; \
533: fi; \
534: list='$(SUBDIRS)'; for subdir in $$list; do \
535: if test "$$subdir" = .; then :; else \
536: test ! -f $$subdir/TAGS || \
537: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
538: fi; \
539: done; \
540: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
541: unique=`for i in $$list; do \
542: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
543: done | \
544: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
545: END { if (nonempty) { for (i in files) print i; }; }'`; \
546: shift; \
547: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
548: test -n "$$unique" || unique=$$empty_fix; \
549: if test $$# -gt 0; then \
550: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
551: "$$@" $$unique; \
552: else \
553: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
554: $$unique; \
555: fi; \
556: fi
557: ctags: CTAGS
558: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
559: $(TAGS_FILES) $(LISP)
560: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
561: unique=`for i in $$list; do \
562: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
563: done | \
564: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
565: END { if (nonempty) { for (i in files) print i; }; }'`; \
566: test -z "$(CTAGS_ARGS)$$unique" \
567: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
568: $$unique
569:
570: GTAGS:
571: here=`$(am__cd) $(top_builddir) && pwd` \
572: && $(am__cd) $(top_srcdir) \
573: && gtags -i $(GTAGS_ARGS) "$$here"
574:
575: distclean-tags:
576: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
577:
578: distdir: $(DISTFILES)
579: @list='$(MANS)'; if test -n "$$list"; then \
580: list=`for p in $$list; do \
581: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
582: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
583: if test -n "$$list" && \
584: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
585: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
586: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
587: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
588: echo " typically \`make maintainer-clean' will remove them" >&2; \
589: exit 1; \
590: else :; fi; \
591: else :; fi
592: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
593: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
594: list='$(DISTFILES)'; \
595: dist_files=`for file in $$list; do echo $$file; done | \
596: sed -e "s|^$$srcdirstrip/||;t" \
597: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
598: case $$dist_files in \
599: */*) $(MKDIR_P) `echo "$$dist_files" | \
600: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
601: sort -u` ;; \
602: esac; \
603: for file in $$dist_files; do \
604: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
605: if test -d $$d/$$file; then \
606: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
607: if test -d "$(distdir)/$$file"; then \
608: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
609: fi; \
610: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
611: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
612: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
613: fi; \
614: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
615: else \
616: test -f "$(distdir)/$$file" \
617: || cp -p $$d/$$file "$(distdir)/$$file" \
618: || exit 1; \
619: fi; \
620: done
621: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
622: if test "$$subdir" = .; then :; else \
623: test -d "$(distdir)/$$subdir" \
624: || $(MKDIR_P) "$(distdir)/$$subdir" \
625: || exit 1; \
626: fi; \
627: done
628: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
629: if test "$$subdir" = .; then :; else \
630: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
631: $(am__relativize); \
632: new_distdir=$$reldir; \
633: dir1=$$subdir; dir2="$(top_distdir)"; \
634: $(am__relativize); \
635: new_top_distdir=$$reldir; \
636: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
637: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
638: ($(am__cd) $$subdir && \
639: $(MAKE) $(AM_MAKEFLAGS) \
640: top_distdir="$$new_top_distdir" \
641: distdir="$$new_distdir" \
642: am__remove_distdir=: \
643: am__skip_length_check=: \
644: am__skip_mode_fix=: \
645: distdir) \
646: || exit 1; \
647: fi; \
648: done
649: check-am: all-am
650: check: check-recursive
651: all-am: Makefile $(MANS)
652: installdirs: installdirs-recursive
653: installdirs-am:
654: for dir in "$(DESTDIR)$(man1dir)"; do \
655: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
656: done
657: install: install-recursive
658: install-exec: install-exec-recursive
659: install-data: install-data-recursive
660: uninstall: uninstall-recursive
661:
662: install-am: all-am
663: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
664:
665: installcheck: installcheck-recursive
666: install-strip:
667: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
668: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
669: `test -z '$(STRIP)' || \
670: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
671: mostlyclean-generic:
672:
673: clean-generic:
674:
675: distclean-generic:
676: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
677: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
678:
679: maintainer-clean-generic:
680: @echo "This command is intended for maintainers to use"
681: @echo "it deletes files that may require special tools to rebuild."
682: clean: clean-recursive
683:
684: clean-am: clean-generic clean-libtool clean-local mostlyclean-am
685:
686: distclean: distclean-recursive
687: -rm -f Makefile
688: distclean-am: clean-am distclean-generic distclean-tags
689:
690: dvi: dvi-recursive
691:
692: dvi-am:
693:
694: html: html-recursive
695:
696: html-am:
697:
698: info: info-recursive
699:
700: info-am:
701:
702: install-data-am: install-data-local install-man
703:
704: install-dvi: install-dvi-recursive
705:
706: install-dvi-am:
707:
708: install-exec-am:
709:
710: install-html: install-html-recursive
711:
712: install-html-am:
713:
714: install-info: install-info-recursive
715:
716: install-info-am:
717:
718: install-man: install-man1
719:
720: install-pdf: install-pdf-recursive
721:
722: install-pdf-am:
723:
724: install-ps: install-ps-recursive
725:
726: install-ps-am:
727:
728: installcheck-am:
729:
730: maintainer-clean: maintainer-clean-recursive
731: -rm -f Makefile
732: maintainer-clean-am: distclean-am maintainer-clean-generic \
733: maintainer-clean-local
734:
735: mostlyclean: mostlyclean-recursive
736:
737: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
738:
739: pdf: pdf-recursive
740:
741: pdf-am:
742:
743: ps: ps-recursive
744:
745: ps-am:
746:
747: uninstall-am: uninstall-man
748:
749: uninstall-man: uninstall-man1
750:
751: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
752: install-am install-strip tags-recursive
753:
754: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
755: all all-am check check-am clean clean-generic clean-libtool \
756: clean-local ctags ctags-recursive distclean distclean-generic \
757: distclean-libtool distclean-tags distdir dvi dvi-am html \
758: html-am info info-am install install-am install-data \
759: install-data-am install-data-local install-dvi install-dvi-am \
760: install-exec install-exec-am install-html install-html-am \
761: install-info install-info-am install-man install-man1 \
762: install-pdf install-pdf-am install-ps install-ps-am \
763: install-strip installcheck installcheck-am installdirs \
764: installdirs-am maintainer-clean maintainer-clean-generic \
765: maintainer-clean-local mostlyclean mostlyclean-generic \
766: mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
767: uninstall uninstall-am uninstall-man uninstall-man1
768:
769:
770: @REBUILD_DOCS_TRUE@all: web $(top_builddir)/NEWS libxml2.xsa $(man_MANS)
771: @REBUILD_DOCS_FALSE@all:
772:
773: api: libxml2-api.xml libxml2-refs.xml $(APIPAGES) $(srcdir)/html/index.html $(WIN32_DIR)/libxml2.def.src ../elfgcchack.h $(srcdir)/site.xsl
774:
775: web: $(PAGES)
776:
777: ../elfgcchack.h: $(srcdir)/elfgcchack.xsl $(srcdir)/libxml2-api.xml
778: -@(if [ -x $(XSLTPROC) ] ; then \
779: echo "Rebuilding the elfgcchack.h header" ; \
780: $(XSLTPROC) --nonet $(srcdir)/elfgcchack.xsl $(srcdir)/libxml2-api.xml > elfgcchack.h ; \
781: if [ "`diff -q elfgcchack.h ../elfgcchack.h`" ] ; then \
782: echo "updating ../elfgcchack.h"; \
783: cp elfgcchack.h ../elfgcchack.h; \
784: fi ; rm -f elfgcchack.h ; fi );
785:
786: $(PAGES): xml.html site.xsl
787: -@(if [ -x $(XSLTPROC) ] ; then \
788: echo "Rebuilding the HTML Web pages from xml.html" ; \
789: $(XSLTPROC) --nonet --html $(top_srcdir)/doc/site.xsl $(top_srcdir)/doc/xml.html > index.html ; fi );
790: -@(if [ -x $(XMLLINT) ] ; then \
791: echo "Validating the HTML Web pages" ; \
792: $(XMLLINT) --nonet --valid --noout $(PAGES) ; fi );
793:
794: $(top_builddir)/NEWS: $(top_srcdir)/doc/news.xsl $(top_srcdir)/doc/news.html
795: -@(if [ -x $(XSLTPROC) ] ; then \
796: $(XSLTPROC) --nonet $(top_srcdir)/doc/news.xsl $(top_srcdir)/doc/news.html > $(top_builddir)/NEWS ; fi );
797:
798: libxml2.xsa: $(top_srcdir)/doc/xsa.xsl $(top_srcdir)/doc/news.html
799: -@(if [ -x $(XSLTPROC) ] ; then \
800: echo "Rebuilding the NEWS file" ; \
801: $(XSLTPROC) --nonet $(top_srcdir)/doc/xsa.xsl $(top_srcdir)/doc/news.html > libxml2.xsa ; fi );
802:
803: $(APIPAGES): libxml2-api.xml libxml2-refs.xml $(top_srcdir)/doc/site.xsl $(top_srcdir)/doc/api.xsl
804: -@(if [ -x $(XSLTPROC) ] ; then \
805: echo "Rebuilding the HTML API pages from libxml2-refs.xml" ; \
806: $(XSLTPROC) --nonet --html $(top_srcdir)/doc/api.xsl \
807: $(top_srcdir)/doc/xml.html ; fi );
808: -@(if [ -x $(XMLLINT) ] ; then \
809: echo "Validating the HTML API pages" ; \
810: $(XMLLINT) --nonet --valid --noout API*.html ; fi );
811:
812: $(srcdir)/html/index.html: libxml2-api.xml $(srcdir)/newapi.xsl
813: -@(if [ -x $(XSLTPROC) ] ; then \
814: echo "Rebuilding the HTML pages from the XML API" ; \
815: $(XSLTPROC) --nonet $(srcdir)/newapi.xsl libxml2-api.xml ; fi )
816: -@(if [ -x $(XMLLINT) ] ; then \
817: echo "Validating the resulting XHTML pages" ; \
818: $(XMLLINT) --nonet --valid --noout html/*.html ; fi );
819:
820: wiki: libxml2-api.xml $(srcdir)/wiki.xsl
821: -@(if [ -x $(XSLTPROC) ] ; then \
822: echo "Rebuilding the wiki HTML pages from the XML API" ; \
823: $(XSLTPROC) --nonet $(srcdir)/wiki.xsl libxml2-api.xml; fi )
824:
825: $(WIN32_DIR)/libxml2.def.src: libxml2-api.xml
826: -@(if [ -x $(XSLTPROC) ] ; then \
827: $(XSLTPROC) -o $(WIN32_DIR)/libxml2.def.src \
828: --nonet $(WIN32_DIR)/defgen.xsl libxml2-api.xml ; fi )
829:
830: libxml2-api.xml libxml2-refs.xml ../libxml2.syms: apibuild.py symbols.xml syms.xsl checkapisym.xsl ../include/libxml/*.h ../*.c
831: -(./apibuild.py)
832: ($(XSLTPROC) checkapisym.xsl libxml2-api.xml)
833: ($(XSLTPROC) -o ../libxml2.syms syms.xsl symbols.xml)
834: -@(cd .. ; $(MAKE) rebuild_testapi)
835:
836: xmllint.1: xmllint.xml
837: -@($(XSLTPROC) --nonet xmllint.xml)
838:
839: xmlcatalog.1: xmlcatalog_man.xml
840: -@($(XSLTPROC) --nonet xmlcatalog_man.xml)
841:
842: clean-local:
843: rm -f *~ *.bak *.hierarchy *.signals *-unused.txt
844:
845: maintainer-clean-local: clean-local
846: rm -rf libxml-decl-list.txt libxml-decl.txt
847:
848: rebuild: api all
849:
850: install-data-local:
851: @MKDIR_P@ $(DESTDIR)$(HTML_DIR)
852: -@INSTALL@ -m 0644 $(srcdir)/xml.html $(srcdir)/encoding.html $(srcdir)/FAQ.html $(srcdir)/structure.gif $(srcdir)/DOM.gif $(srcdir)/smallfootonly.gif $(srcdir)/redhat.gif $(srcdir)/libxml.gif $(srcdir)/w3c.png $(srcdir)/Libxml2-Logo-180x168.gif $(srcdir)/Libxml2-Logo-90x34.gif $(DESTDIR)$(HTML_DIR)
853: @MKDIR_P@ $(DESTDIR)$(HTML_DIR)/html
854: -@INSTALL@ -m 0644 $(srcdir)/html/*.html $(DESTDIR)$(HTML_DIR)/html
855: -@INSTALL@ -m 0644 $(srcdir)/html/*.png $(DESTDIR)$(HTML_DIR)/html
856: @MKDIR_P@ $(DESTDIR)$(HTML_DIR)/tutorial
857: -@INSTALL@ -m 0644 $(srcdir)/tutorial/*.* \
858: $(DESTDIR)$(HTML_DIR)/tutorial
859: @MKDIR_P@ $(DESTDIR)$(HTML_DIR)/tutorial/images
860: -@INSTALL@ -m 0644 $(srcdir)/tutorial/images/*.* \
861: $(DESTDIR)$(HTML_DIR)/tutorial/images
862: @MKDIR_P@ $(DESTDIR)$(HTML_DIR)/tutorial/images/callouts
863: -@INSTALL@ -m 0644 $(srcdir)/tutorial/images/callouts/*.* \
864: $(DESTDIR)$(HTML_DIR)/tutorial/images/callouts
865:
866: .PHONY : html xml templates scan
867:
868: # Tell versions [3.59,3.63) of GNU make to not export all variables.
869: # Otherwise a system limit (for SysV at least) may be exceeded.
870: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / libxml2 / doc