Annotation of embedaddon/lighttpd/doc/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.14 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994-2013 Free Software Foundation, Inc.
! 5:
! 6: # This Makefile.in is free software; the Free Software Foundation
! 7: # gives unlimited permission to copy and/or distribute it,
! 8: # with or without modifications, as long as this notice is preserved.
! 9:
! 10: # This program is distributed in the hope that it will be useful,
! 11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 13: # PARTICULAR PURPOSE.
! 14:
! 15: @SET_MAKE@
! 16: VPATH = @srcdir@
! 17: am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
! 18: am__make_running_with_option = \
! 19: case $${target_option-} in \
! 20: ?) ;; \
! 21: *) echo "am__make_running_with_option: internal error: invalid" \
! 22: "target option '$${target_option-}' specified" >&2; \
! 23: exit 1;; \
! 24: esac; \
! 25: has_opt=no; \
! 26: sane_makeflags=$$MAKEFLAGS; \
! 27: if $(am__is_gnu_make); then \
! 28: sane_makeflags=$$MFLAGS; \
! 29: else \
! 30: case $$MAKEFLAGS in \
! 31: *\\[\ \ ]*) \
! 32: bs=\\; \
! 33: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
! 34: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
! 35: esac; \
! 36: fi; \
! 37: skip_next=no; \
! 38: strip_trailopt () \
! 39: { \
! 40: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
! 41: }; \
! 42: for flg in $$sane_makeflags; do \
! 43: test $$skip_next = yes && { skip_next=no; continue; }; \
! 44: case $$flg in \
! 45: *=*|--*) continue;; \
! 46: -*I) strip_trailopt 'I'; skip_next=yes;; \
! 47: -*I?*) strip_trailopt 'I';; \
! 48: -*O) strip_trailopt 'O'; skip_next=yes;; \
! 49: -*O?*) strip_trailopt 'O';; \
! 50: -*l) strip_trailopt 'l'; skip_next=yes;; \
! 51: -*l?*) strip_trailopt 'l';; \
! 52: -[dEDm]) skip_next=yes;; \
! 53: -[JT]) skip_next=yes;; \
! 54: esac; \
! 55: case $$flg in \
! 56: *$$target_option*) has_opt=yes; break;; \
! 57: esac; \
! 58: done; \
! 59: test $$has_opt = yes
! 60: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
! 61: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
! 62: pkgdatadir = $(datadir)/@PACKAGE@
! 63: pkgincludedir = $(includedir)/@PACKAGE@
! 64: pkglibdir = $(libdir)/@PACKAGE@
! 65: pkglibexecdir = $(libexecdir)/@PACKAGE@
! 66: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 67: install_sh_DATA = $(install_sh) -c -m 644
! 68: install_sh_PROGRAM = $(install_sh) -c
! 69: install_sh_SCRIPT = $(install_sh) -c
! 70: INSTALL_HEADER = $(INSTALL_DATA)
! 71: transform = $(program_transform_name)
! 72: NORMAL_INSTALL = :
! 73: PRE_INSTALL = :
! 74: POST_INSTALL = :
! 75: NORMAL_UNINSTALL = :
! 76: PRE_UNINSTALL = :
! 77: POST_UNINSTALL = :
! 78: build_triplet = @build@
! 79: host_triplet = @host@
! 80: target_triplet = @target@
! 81: subdir = doc
! 82: DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
! 83: $(dist_man8_MANS)
! 84: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 85: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
! 86: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
! 87: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
! 88: $(top_srcdir)/configure.ac
! 89: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 90: $(ACLOCAL_M4)
! 91: mkinstalldirs = $(install_sh) -d
! 92: CONFIG_HEADER = $(top_builddir)/config.h
! 93: CONFIG_CLEAN_FILES =
! 94: CONFIG_CLEAN_VPATH_FILES =
! 95: AM_V_P = $(am__v_P_@AM_V@)
! 96: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
! 97: am__v_P_0 = false
! 98: am__v_P_1 = :
! 99: AM_V_GEN = $(am__v_GEN_@AM_V@)
! 100: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
! 101: am__v_GEN_0 = @echo " GEN " $@;
! 102: am__v_GEN_1 =
! 103: AM_V_at = $(am__v_at_@AM_V@)
! 104: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
! 105: am__v_at_0 = @
! 106: am__v_at_1 =
! 107: SOURCES =
! 108: DIST_SOURCES =
! 109: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
! 110: ctags-recursive dvi-recursive html-recursive info-recursive \
! 111: install-data-recursive install-dvi-recursive \
! 112: install-exec-recursive install-html-recursive \
! 113: install-info-recursive install-pdf-recursive \
! 114: install-ps-recursive install-recursive installcheck-recursive \
! 115: installdirs-recursive pdf-recursive ps-recursive \
! 116: tags-recursive uninstall-recursive
! 117: am__can_run_installinfo = \
! 118: case $$AM_UPDATE_INFO_DIR in \
! 119: n|no|NO) false;; \
! 120: *) (install-info --version) >/dev/null 2>&1;; \
! 121: esac
! 122: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
! 123: am__vpath_adj = case $$p in \
! 124: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
! 125: *) f=$$p;; \
! 126: esac;
! 127: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
! 128: am__install_max = 40
! 129: am__nobase_strip_setup = \
! 130: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
! 131: am__nobase_strip = \
! 132: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
! 133: am__nobase_list = $(am__nobase_strip_setup); \
! 134: for p in $$list; do echo "$$p $$p"; done | \
! 135: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
! 136: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
! 137: if (++n[$$2] == $(am__install_max)) \
! 138: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
! 139: END { for (dir in files) print dir, files[dir] }'
! 140: am__base_list = \
! 141: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
! 142: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
! 143: am__uninstall_files_from_dir = { \
! 144: test -z "$$files" \
! 145: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
! 146: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
! 147: $(am__cd) "$$dir" && rm -f $$files; }; \
! 148: }
! 149: man8dir = $(mandir)/man8
! 150: am__installdirs = "$(DESTDIR)$(man8dir)"
! 151: NROFF = nroff
! 152: MANS = $(dist_man8_MANS)
! 153: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
! 154: distclean-recursive maintainer-clean-recursive
! 155: am__recursive_targets = \
! 156: $(RECURSIVE_TARGETS) \
! 157: $(RECURSIVE_CLEAN_TARGETS) \
! 158: $(am__extra_recursive_targets)
! 159: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
! 160: distdir
! 161: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
! 162: # Read a list of newline-separated strings from the standard input,
! 163: # and print each of them once, without duplicates. Input order is
! 164: # *not* preserved.
! 165: am__uniquify_input = $(AWK) '\
! 166: BEGIN { nonempty = 0; } \
! 167: { items[$$0] = 1; nonempty = 1; } \
! 168: END { if (nonempty) { for (i in items) print i; }; } \
! 169: '
! 170: # Make sure the list of sources is unique. This is necessary because,
! 171: # e.g., the same source file might be shared among _SOURCES variables
! 172: # for different programs/libraries.
! 173: am__define_uniq_tagged_files = \
! 174: list='$(am__tagged_files)'; \
! 175: unique=`for i in $$list; do \
! 176: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 177: done | $(am__uniquify_input)`
! 178: ETAGS = etags
! 179: CTAGS = ctags
! 180: DIST_SUBDIRS = $(SUBDIRS)
! 181: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 182: am__relativize = \
! 183: dir0=`pwd`; \
! 184: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
! 185: sed_rest='s,^[^/]*/*,,'; \
! 186: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
! 187: sed_butlast='s,/*[^/]*$$,,'; \
! 188: while test -n "$$dir1"; do \
! 189: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
! 190: if test "$$first" != "."; then \
! 191: if test "$$first" = ".."; then \
! 192: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
! 193: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
! 194: else \
! 195: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
! 196: if test "$$first2" = "$$first"; then \
! 197: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
! 198: else \
! 199: dir2="../$$dir2"; \
! 200: fi; \
! 201: dir0="$$dir0"/"$$first"; \
! 202: fi; \
! 203: fi; \
! 204: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
! 205: done; \
! 206: reldir="$$dir2"
! 207: ACLOCAL = @ACLOCAL@
! 208: AMTAR = @AMTAR@
! 209: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
! 210: AR = @AR@
! 211: ATTR_LIB = @ATTR_LIB@
! 212: AUTOCONF = @AUTOCONF@
! 213: AUTOHEADER = @AUTOHEADER@
! 214: AUTOMAKE = @AUTOMAKE@
! 215: AWK = @AWK@
! 216: BZ_LIB = @BZ_LIB@
! 217: CC = @CC@
! 218: CCDEPMODE = @CCDEPMODE@
! 219: CFLAGS = @CFLAGS@
! 220: CPP = @CPP@
! 221: CPPFLAGS = @CPPFLAGS@
! 222: CRYPT_LIB = @CRYPT_LIB@
! 223: CYGPATH_W = @CYGPATH_W@
! 224: DEFS = @DEFS@
! 225: DEPDIR = @DEPDIR@
! 226: DLLTOOL = @DLLTOOL@
! 227: DL_LIB = @DL_LIB@
! 228: DSYMUTIL = @DSYMUTIL@
! 229: DUMPBIN = @DUMPBIN@
! 230: ECHO_C = @ECHO_C@
! 231: ECHO_N = @ECHO_N@
! 232: ECHO_T = @ECHO_T@
! 233: EGREP = @EGREP@
! 234: EXEEXT = @EXEEXT@
! 235: FAM_CFLAGS = @FAM_CFLAGS@
! 236: FAM_LIBS = @FAM_LIBS@
! 237: FGREP = @FGREP@
! 238: GDBM_LIB = @GDBM_LIB@
! 239: GREP = @GREP@
! 240: INSTALL = @INSTALL@
! 241: INSTALL_DATA = @INSTALL_DATA@
! 242: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 243: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 244: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 245: LBER_LIB = @LBER_LIB@
! 246: LD = @LD@
! 247: LDAP_LIB = @LDAP_LIB@
! 248: LDFLAGS = @LDFLAGS@
! 249: LIBEV_CFLAGS = @LIBEV_CFLAGS@
! 250: LIBEV_LIBS = @LIBEV_LIBS@
! 251: LIBOBJS = @LIBOBJS@
! 252: LIBS = @LIBS@
! 253: LIBTOOL = @LIBTOOL@
! 254: LIPO = @LIPO@
! 255: LN_S = @LN_S@
! 256: LTLIBOBJS = @LTLIBOBJS@
! 257: LUA_CFLAGS = @LUA_CFLAGS@
! 258: LUA_LIBS = @LUA_LIBS@
! 259: MAKEINFO = @MAKEINFO@
! 260: MANIFEST_TOOL = @MANIFEST_TOOL@
! 261: MEMCACHE_LIB = @MEMCACHE_LIB@
! 262: MKDIR_P = @MKDIR_P@
! 263: MYSQL_CONFIG = @MYSQL_CONFIG@
! 264: MYSQL_INCLUDE = @MYSQL_INCLUDE@
! 265: MYSQL_LIBS = @MYSQL_LIBS@
! 266: NM = @NM@
! 267: NMEDIT = @NMEDIT@
! 268: OBJDUMP = @OBJDUMP@
! 269: OBJEXT = @OBJEXT@
! 270: OTOOL = @OTOOL@
! 271: OTOOL64 = @OTOOL64@
! 272: PACKAGE = @PACKAGE@
! 273: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 274: PACKAGE_NAME = @PACKAGE_NAME@
! 275: PACKAGE_STRING = @PACKAGE_STRING@
! 276: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 277: PACKAGE_URL = @PACKAGE_URL@
! 278: PACKAGE_VERSION = @PACKAGE_VERSION@
! 279: PATH_SEPARATOR = @PATH_SEPARATOR@
! 280: PCRECONFIG = @PCRECONFIG@
! 281: PCRE_LIB = @PCRE_LIB@
! 282: PKG_CONFIG = @PKG_CONFIG@
! 283: PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
! 284: PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
! 285: RANLIB = @RANLIB@
! 286: SED = @SED@
! 287: SENDFILE_LIB = @SENDFILE_LIB@
! 288: SET_MAKE = @SET_MAKE@
! 289: SHELL = @SHELL@
! 290: SQLITE_CFLAGS = @SQLITE_CFLAGS@
! 291: SQLITE_LIBS = @SQLITE_LIBS@
! 292: SSL_LIB = @SSL_LIB@
! 293: STRIP = @STRIP@
! 294: UUID_LIBS = @UUID_LIBS@
! 295: VERSION = @VERSION@
! 296: XML_CFLAGS = @XML_CFLAGS@
! 297: XML_LIBS = @XML_LIBS@
! 298: Z_LIB = @Z_LIB@
! 299: abs_builddir = @abs_builddir@
! 300: abs_srcdir = @abs_srcdir@
! 301: abs_top_builddir = @abs_top_builddir@
! 302: abs_top_srcdir = @abs_top_srcdir@
! 303: ac_ct_AR = @ac_ct_AR@
! 304: ac_ct_CC = @ac_ct_CC@
! 305: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
! 306: am__include = @am__include@
! 307: am__leading_dot = @am__leading_dot@
! 308: am__quote = @am__quote@
! 309: am__tar = @am__tar@
! 310: am__untar = @am__untar@
! 311: bindir = @bindir@
! 312: build = @build@
! 313: build_alias = @build_alias@
! 314: build_cpu = @build_cpu@
! 315: build_os = @build_os@
! 316: build_vendor = @build_vendor@
! 317: builddir = @builddir@
! 318: datadir = @datadir@
! 319: datarootdir = @datarootdir@
! 320: docdir = @docdir@
! 321: dvidir = @dvidir@
! 322: exec_prefix = @exec_prefix@
! 323: host = @host@
! 324: host_alias = @host_alias@
! 325: host_cpu = @host_cpu@
! 326: host_os = @host_os@
! 327: host_vendor = @host_vendor@
! 328: htmldir = @htmldir@
! 329: includedir = @includedir@
! 330: infodir = @infodir@
! 331: install_sh = @install_sh@
! 332: libdir = @libdir@
! 333: libexecdir = @libexecdir@
! 334: localedir = @localedir@
! 335: localstatedir = @localstatedir@
! 336: mandir = @mandir@
! 337: mkdir_p = @mkdir_p@
! 338: oldincludedir = @oldincludedir@
! 339: pdfdir = @pdfdir@
! 340: prefix = @prefix@
! 341: program_transform_name = @program_transform_name@
! 342: psdir = @psdir@
! 343: sbindir = @sbindir@
! 344: sharedstatedir = @sharedstatedir@
! 345: srcdir = @srcdir@
! 346: sysconfdir = @sysconfdir@
! 347: target = @target@
! 348: target_alias = @target_alias@
! 349: target_cpu = @target_cpu@
! 350: target_os = @target_os@
! 351: target_vendor = @target_vendor@
! 352: top_build_prefix = @top_build_prefix@
! 353: top_builddir = @top_builddir@
! 354: top_srcdir = @top_srcdir@
! 355: SUBDIRS = config scripts initscripts systemd outdated
! 356: dist_man8_MANS = lighttpd.8
! 357: EXTRA_DIST = \
! 358: newstyle.css \
! 359: oldstyle.css
! 360:
! 361: all: all-recursive
! 362:
! 363: .SUFFIXES:
! 364: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
! 365: @for dep in $?; do \
! 366: case '$(am__configure_deps)' in \
! 367: *$$dep*) \
! 368: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 369: && { if test -f $@; then exit 0; else break; fi; }; \
! 370: exit 1;; \
! 371: esac; \
! 372: done; \
! 373: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
! 374: $(am__cd) $(top_srcdir) && \
! 375: $(AUTOMAKE) --foreign doc/Makefile
! 376: .PRECIOUS: Makefile
! 377: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 378: @case '$?' in \
! 379: *config.status*) \
! 380: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 381: *) \
! 382: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 383: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 384: esac;
! 385:
! 386: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 387: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 388:
! 389: $(top_srcdir)/configure: $(am__configure_deps)
! 390: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 391: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
! 392: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 393: $(am__aclocal_m4_deps):
! 394:
! 395: mostlyclean-libtool:
! 396: -rm -f *.lo
! 397:
! 398: clean-libtool:
! 399: -rm -rf .libs _libs
! 400: install-man8: $(dist_man8_MANS)
! 401: @$(NORMAL_INSTALL)
! 402: @list1='$(dist_man8_MANS)'; \
! 403: list2=''; \
! 404: test -n "$(man8dir)" \
! 405: && test -n "`echo $$list1$$list2`" \
! 406: || exit 0; \
! 407: echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
! 408: $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
! 409: { for i in $$list1; do echo "$$i"; done; \
! 410: if test -n "$$list2"; then \
! 411: for i in $$list2; do echo "$$i"; done \
! 412: | sed -n '/\.8[a-z]*$$/p'; \
! 413: fi; \
! 414: } | while read p; do \
! 415: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
! 416: echo "$$d$$p"; echo "$$p"; \
! 417: done | \
! 418: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
! 419: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
! 420: sed 'N;N;s,\n, ,g' | { \
! 421: list=; while read file base inst; do \
! 422: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
! 423: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
! 424: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
! 425: fi; \
! 426: done; \
! 427: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
! 428: while read files; do \
! 429: test -z "$$files" || { \
! 430: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
! 431: $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
! 432: done; }
! 433:
! 434: uninstall-man8:
! 435: @$(NORMAL_UNINSTALL)
! 436: @list='$(dist_man8_MANS)'; test -n "$(man8dir)" || exit 0; \
! 437: files=`{ for i in $$list; do echo "$$i"; done; \
! 438: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
! 439: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
! 440: dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
! 441:
! 442: # This directory's subdirectories are mostly independent; you can cd
! 443: # into them and run 'make' without going through this Makefile.
! 444: # To change the values of 'make' variables: instead of editing Makefiles,
! 445: # (1) if the variable is set in 'config.status', edit 'config.status'
! 446: # (which will cause the Makefiles to be regenerated when you run 'make');
! 447: # (2) otherwise, pass the desired values on the 'make' command line.
! 448: $(am__recursive_targets):
! 449: @fail=; \
! 450: if $(am__make_keepgoing); then \
! 451: failcom='fail=yes'; \
! 452: else \
! 453: failcom='exit 1'; \
! 454: fi; \
! 455: dot_seen=no; \
! 456: target=`echo $@ | sed s/-recursive//`; \
! 457: case "$@" in \
! 458: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! 459: *) list='$(SUBDIRS)' ;; \
! 460: esac; \
! 461: for subdir in $$list; do \
! 462: echo "Making $$target in $$subdir"; \
! 463: if test "$$subdir" = "."; then \
! 464: dot_seen=yes; \
! 465: local_target="$$target-am"; \
! 466: else \
! 467: local_target="$$target"; \
! 468: fi; \
! 469: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 470: || eval $$failcom; \
! 471: done; \
! 472: if test "$$dot_seen" = "no"; then \
! 473: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
! 474: fi; test -z "$$fail"
! 475:
! 476: ID: $(am__tagged_files)
! 477: $(am__define_uniq_tagged_files); mkid -fID $$unique
! 478: tags: tags-recursive
! 479: TAGS: tags
! 480:
! 481: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
! 482: set x; \
! 483: here=`pwd`; \
! 484: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
! 485: include_option=--etags-include; \
! 486: empty_fix=.; \
! 487: else \
! 488: include_option=--include; \
! 489: empty_fix=; \
! 490: fi; \
! 491: list='$(SUBDIRS)'; for subdir in $$list; do \
! 492: if test "$$subdir" = .; then :; else \
! 493: test ! -f $$subdir/TAGS || \
! 494: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
! 495: fi; \
! 496: done; \
! 497: $(am__define_uniq_tagged_files); \
! 498: shift; \
! 499: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
! 500: test -n "$$unique" || unique=$$empty_fix; \
! 501: if test $$# -gt 0; then \
! 502: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 503: "$$@" $$unique; \
! 504: else \
! 505: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 506: $$unique; \
! 507: fi; \
! 508: fi
! 509: ctags: ctags-recursive
! 510:
! 511: CTAGS: ctags
! 512: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
! 513: $(am__define_uniq_tagged_files); \
! 514: test -z "$(CTAGS_ARGS)$$unique" \
! 515: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
! 516: $$unique
! 517:
! 518: GTAGS:
! 519: here=`$(am__cd) $(top_builddir) && pwd` \
! 520: && $(am__cd) $(top_srcdir) \
! 521: && gtags -i $(GTAGS_ARGS) "$$here"
! 522: cscopelist: cscopelist-recursive
! 523:
! 524: cscopelist-am: $(am__tagged_files)
! 525: list='$(am__tagged_files)'; \
! 526: case "$(srcdir)" in \
! 527: [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
! 528: *) sdir=$(subdir)/$(srcdir) ;; \
! 529: esac; \
! 530: for i in $$list; do \
! 531: if test -f "$$i"; then \
! 532: echo "$(subdir)/$$i"; \
! 533: else \
! 534: echo "$$sdir/$$i"; \
! 535: fi; \
! 536: done >> $(top_builddir)/cscope.files
! 537:
! 538: distclean-tags:
! 539: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
! 540:
! 541: distdir: $(DISTFILES)
! 542: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 543: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 544: list='$(DISTFILES)'; \
! 545: dist_files=`for file in $$list; do echo $$file; done | \
! 546: sed -e "s|^$$srcdirstrip/||;t" \
! 547: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 548: case $$dist_files in \
! 549: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 550: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 551: sort -u` ;; \
! 552: esac; \
! 553: for file in $$dist_files; do \
! 554: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 555: if test -d $$d/$$file; then \
! 556: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 557: if test -d "$(distdir)/$$file"; then \
! 558: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 559: fi; \
! 560: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 561: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 562: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 563: fi; \
! 564: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 565: else \
! 566: test -f "$(distdir)/$$file" \
! 567: || cp -p $$d/$$file "$(distdir)/$$file" \
! 568: || exit 1; \
! 569: fi; \
! 570: done
! 571: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 572: if test "$$subdir" = .; then :; else \
! 573: $(am__make_dryrun) \
! 574: || test -d "$(distdir)/$$subdir" \
! 575: || $(MKDIR_P) "$(distdir)/$$subdir" \
! 576: || exit 1; \
! 577: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
! 578: $(am__relativize); \
! 579: new_distdir=$$reldir; \
! 580: dir1=$$subdir; dir2="$(top_distdir)"; \
! 581: $(am__relativize); \
! 582: new_top_distdir=$$reldir; \
! 583: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
! 584: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
! 585: ($(am__cd) $$subdir && \
! 586: $(MAKE) $(AM_MAKEFLAGS) \
! 587: top_distdir="$$new_top_distdir" \
! 588: distdir="$$new_distdir" \
! 589: am__remove_distdir=: \
! 590: am__skip_length_check=: \
! 591: am__skip_mode_fix=: \
! 592: distdir) \
! 593: || exit 1; \
! 594: fi; \
! 595: done
! 596: check-am: all-am
! 597: check: check-recursive
! 598: all-am: Makefile $(MANS)
! 599: installdirs: installdirs-recursive
! 600: installdirs-am:
! 601: for dir in "$(DESTDIR)$(man8dir)"; do \
! 602: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
! 603: done
! 604: install: install-recursive
! 605: install-exec: install-exec-recursive
! 606: install-data: install-data-recursive
! 607: uninstall: uninstall-recursive
! 608:
! 609: install-am: all-am
! 610: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 611:
! 612: installcheck: installcheck-recursive
! 613: install-strip:
! 614: if test -z '$(STRIP)'; then \
! 615: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 616: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 617: install; \
! 618: else \
! 619: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 620: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 621: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
! 622: fi
! 623: mostlyclean-generic:
! 624:
! 625: clean-generic:
! 626:
! 627: distclean-generic:
! 628: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 629: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
! 630:
! 631: maintainer-clean-generic:
! 632: @echo "This command is intended for maintainers to use"
! 633: @echo "it deletes files that may require special tools to rebuild."
! 634: clean: clean-recursive
! 635:
! 636: clean-am: clean-generic clean-libtool mostlyclean-am
! 637:
! 638: distclean: distclean-recursive
! 639: -rm -f Makefile
! 640: distclean-am: clean-am distclean-generic distclean-tags
! 641:
! 642: dvi: dvi-recursive
! 643:
! 644: dvi-am:
! 645:
! 646: html: html-recursive
! 647:
! 648: html-am:
! 649:
! 650: info: info-recursive
! 651:
! 652: info-am:
! 653:
! 654: install-data-am: install-man
! 655:
! 656: install-dvi: install-dvi-recursive
! 657:
! 658: install-dvi-am:
! 659:
! 660: install-exec-am:
! 661:
! 662: install-html: install-html-recursive
! 663:
! 664: install-html-am:
! 665:
! 666: install-info: install-info-recursive
! 667:
! 668: install-info-am:
! 669:
! 670: install-man: install-man8
! 671:
! 672: install-pdf: install-pdf-recursive
! 673:
! 674: install-pdf-am:
! 675:
! 676: install-ps: install-ps-recursive
! 677:
! 678: install-ps-am:
! 679:
! 680: installcheck-am:
! 681:
! 682: maintainer-clean: maintainer-clean-recursive
! 683: -rm -f Makefile
! 684: maintainer-clean-am: distclean-am maintainer-clean-generic
! 685:
! 686: mostlyclean: mostlyclean-recursive
! 687:
! 688: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 689:
! 690: pdf: pdf-recursive
! 691:
! 692: pdf-am:
! 693:
! 694: ps: ps-recursive
! 695:
! 696: ps-am:
! 697:
! 698: uninstall-am: uninstall-man
! 699:
! 700: uninstall-man: uninstall-man8
! 701:
! 702: .MAKE: $(am__recursive_targets) install-am install-strip
! 703:
! 704: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
! 705: check-am clean clean-generic clean-libtool cscopelist-am ctags \
! 706: ctags-am distclean distclean-generic distclean-libtool \
! 707: distclean-tags distdir dvi dvi-am html html-am info info-am \
! 708: install install-am install-data install-data-am install-dvi \
! 709: install-dvi-am install-exec install-exec-am install-html \
! 710: install-html-am install-info install-info-am install-man \
! 711: install-man8 install-pdf install-pdf-am install-ps \
! 712: install-ps-am install-strip installcheck installcheck-am \
! 713: installdirs installdirs-am maintainer-clean \
! 714: maintainer-clean-generic mostlyclean mostlyclean-generic \
! 715: mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
! 716: uninstall-am uninstall-man uninstall-man8
! 717:
! 718:
! 719: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 720: # Otherwise a system limit (for SysV at least) may be exceeded.
! 721: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / lighttpd / doc